Skip to contentSkip to conversation

firmware: arm_scmi: Add SCMI PM driver remove routine

PATCH New Sasha Levin 1 participant 8 messages Oct 2, 2022

Subsystems (7)
lore
Share & tools
lore

Sasha Levin

author maintainer
#0 lore raw

PATCH 1/8 firmware: arm_scmi: Add SCMI PM driver remove routine

From: Cristian Marussi <[email protected]>

[ Upstream commit dea796fcab0a219830831c070b8dc367d7e0f708 ]

Currently, when removing the SCMI PM driver not all the resources registered with genpd subsystem are properly de-registered.

As a side effect of this after a driver unload/load cycle you get a splat with a few warnings like this:

 | debugfs: Directory 'BIG_CPU0' with parent 'pm_genpd' already present!
 | debugfs: Directory 'BIG_CPU1' with parent 'pm_genpd' already present!
 | debugfs: Directory 'LITTLE_CPU0' with parent 'pm_genpd' already present!
 | debugfs: Directory 'LITTLE_CPU1' with parent 'pm_genpd' already present!
 | debugfs: Directory 'LITTLE_CPU2' with parent 'pm_genpd' already present!
 | debugfs: Directory 'LITTLE_CPU3' with parent 'pm_genpd' already present!
 | debugfs: Directory 'BIG_SSTOP' with parent 'pm_genpd' already present!
 | debugfs: Directory 'LITTLE_SSTOP' with parent 'pm_genpd' already present!
 | debugfs: Directory 'DBGSYS' with parent 'pm_genpd' already present!
 | debugfs: Directory 'GPUTOP' with parent 'pm_genpd' already present!

Add a proper scmi_pm_domain_remove callback to the driver in order to take care of all the needed cleanups not handled by devres framework.

---
 drivers/firmware/arm_scmi/scmi_pm_domain.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)
drivers/firmware/arm_scmi/scmi_pm_domain.c +20 -0
index 177874adccf0..b0c8962b9885 100644
@@ -106,9 +106,28 @@ static int scmi_pm_domain_probe(struct scmi_device *sdev)
 	scmi_pd_data->domains = domains;
 	scmi_pd_data->num_domains = num_domains;
 
+	dev_set_drvdata(dev, scmi_pd_data);
+
 	return of_genpd_add_provider_onecell(np, scmi_pd_data);
 }
 
+static void scmi_pm_domain_remove(struct scmi_device *sdev)
+{
+	int i;
+	struct genpd_onecell_data *scmi_pd_data;
+	struct device *dev = &sdev->dev;
+	struct device_node *np = dev->of_node;
+
+	of_genpd_del_provider(np);
+
+	scmi_pd_data = dev_get_drvdata(dev);
+	for (i = 0; i < scmi_pd_data->num_domains; i++) {
+		if (!scmi_pd_data->domains[i])
+			continue;
+		pm_genpd_remove(scmi_pd_data->domains[i]);
+	}
+}
+
 static const struct scmi_device_id scmi_id_table[] = {
 	{ SCMI_PROTOCOL_POWER },
 	{ },
@@ -118,6 +137,7 @@ MODULE_DEVICE_TABLE(scmi, scmi_id_table);
 static struct scmi_driver scmi_power_domain_driver = {
 	.name = "scmi-power-domain",
 	.probe = scmi_pm_domain_probe,
+	.remove = scmi_pm_domain_remove,
 	.id_table = scmi_id_table,
 };
 module_scmi_driver(scmi_power_domain_driver);
Signature · 7 lines
2.35.1


_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
author maintainer
#1 lore raw

PATCH 2/8 dmaengine: xilinx_dma: cleanup for fetching xlnx,num-fstores property

From: Swati Agarwal <[email protected]>

[ Upstream commit 462bce790e6a7e68620a4ce260cc38f7ed0255d5 ]

Free the allocated resources for missing xlnx,num-fstores property.

---
 drivers/dma/xilinx/xilinx_dma.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/dma/xilinx/xilinx_dma.c +1 -1
index 3f38df6b51f2..f72803587b8f 100644
@@ -2654,7 +2654,7 @@ static int xilinx_dma_probe(struct platform_device *pdev)
 		if (err < 0) {
 			dev_err(xdev->dev,
 				"missing xlnx,num-fstores property\n");
-			return err;
+			goto disable_clks;
 		}
 
 		err = of_property_read_u32(node, "xlnx,flush-fsync",
Signature · 7 lines
2.35.1


_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
author maintainer
#2 lore raw

PATCH 3/8 dmaengine: xilinx_dma: Report error in case of dma_set_mask_and_coherent API failure

In reply to Sasha Levin

From: Swati Agarwal <[email protected]>

[ Upstream commit 8f2b6bc79c32f0fa60df000ae387a790ec80eae9 ]

The driver does not handle the failure case while calling dma_set_mask_and_coherent API.

In case of failure, capture the return value of API and then report an error.

Addresses-coverity: Unchecked return value (CHECKED_RETURN)

---
 drivers/dma/xilinx/xilinx_dma.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)
drivers/dma/xilinx/xilinx_dma.c +5 -1
index f72803587b8f..0ba70be4ea85 100644
@@ -2674,7 +2674,11 @@ static int xilinx_dma_probe(struct platform_device *pdev)
 		xdev->ext_addr = false;
 
 	/* Set the dma mask bits */
-	dma_set_mask_and_coherent(xdev->dev, DMA_BIT_MASK(addr_width));
+	err = dma_set_mask_and_coherent(xdev->dev, DMA_BIT_MASK(addr_width));
+	if (err < 0) {
+		dev_err(xdev->dev, "DMA mask error %d\n", err);
+		goto disable_clks;
+	}
 
 	/* Initialize the DMA engine */
 	xdev->common.dev = &pdev->dev;
Signature · 7 lines
2.35.1


_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
author maintainer
#3 lore raw

PATCH 4/8 ARM: dts: fix Moxa SDIO 'compatible', remove 'sdhci' misnomer

In reply to Sasha Levin

From: Sergei Antonov <[email protected]>

[ Upstream commit 02181e68275d28cab3c3f755852770367f1bc229 ]

Driver moxart-mmc.c has .compatible = "moxa,moxart-mmc".

But moxart .dts/.dtsi and the documentation file moxa,moxart-dma.txt contain compatible = "moxa,moxart-sdhci".

Change moxart .dts/.dtsi files and moxa,moxart-dma.txt to match the driver.

Replace 'sdhci' with 'mmc' in names too, since SDHCI is a different controller from FTSDC010.

---
 Documentation/devicetree/bindings/dma/moxa,moxart-dma.txt | 4 ++--
 arch/arm/boot/dts/moxart-uc7112lx.dts                     | 2 +-
 arch/arm/boot/dts/moxart.dtsi                             | 4 ++--
 3 files changed, 5 insertions(+), 5 deletions(-)
Documentation/devicetree/bindings/dma/moxa,moxart-dma.txt +2 -2
index 8a9f3559335b..7e14e26676ec 100644
@@ -34,8 +34,8 @@ Example:
 Use specific request line passing from dma
 For example, MMC request line is 5
 
-	sdhci: sdhci@98e00000 {
-		compatible = "moxa,moxart-sdhci";
+	mmc: mmc@98e00000 {
+		compatible = "moxa,moxart-mmc";
 		reg = <0x98e00000 0x5C>;
 		interrupts = <5 0>;
 		clocks = <&clk_apb>;
arch/arm/boot/dts/moxart-uc7112lx.dts +1 -1
index 4a962a26482d..59d8775a3a93 100644
@@ -80,7 +80,7 @@ &clk_pll {
 	clocks = <&ref12>;
 };
 
-&sdhci {
+&mmc {
 	status = "okay";
 };
 
arch/arm/boot/dts/moxart.dtsi +2 -2
index da7b3237bfe9..804a2bc6ec82 100644
@@ -93,8 +93,8 @@ watchdog: watchdog@98500000 {
 			clock-names = "PCLK";
 		};
 
-		sdhci: sdhci@98e00000 {
-			compatible = "moxa,moxart-sdhci";
+		mmc: mmc@98e00000 {
+			compatible = "moxa,moxart-mmc";
 			reg = <0x98e00000 0x5C>;
 			interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clk_apb>;
Signature · 1 line
2.35.1
author maintainer
#4 lore raw

PATCH 5/8 scsi: qedf: Fix a UAF bug in __qedf_probe()

In reply to Sasha Levin

From: Letu Ren <[email protected]>

[ Upstream commit fbfe96869b782364caebae0445763969ddb6ea67 ]

In __qedf_probe(), if qedf->cdev is NULL which means qed_ops->common->probe() failed, then the program will goto label err1, and scsi_host_put() will free lport->host pointer. Because the memory qedf points to is allocated by libfc_host_alloc(), it will be freed by scsi_host_put(). However, the if statement below label err0 only checks whether qedf is NULL but doesn't check whether the memory has been freed. So a UAF bug can occur.

There are two ways to reach the statements below err0. The first one is described as before, "qedf" should be set to NULL. The second one is goto "err0" directly. In the latter scenario qedf hasn't been changed and it has the initial value NULL. As a result the if statement is not reachable in any situation.

The KASAN logs are as follows:

[    2.312969] BUG: KASAN: use-after-free in __qedf_probe+0x5dcf/0x6bc0
[    2.312969]
[    2.312969] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
[    2.312969] Call Trace:
[    2.312969]  dump_stack_lvl+0x59/0x7b
[    2.312969]  print_address_description+0x7c/0x3b0
[    2.312969]  ? __qedf_probe+0x5dcf/0x6bc0
[    2.312969]  __kasan_report+0x160/0x1c0
[    2.312969]  ? __qedf_probe+0x5dcf/0x6bc0
[    2.312969]  kasan_report+0x4b/0x70
[    2.312969]  ? kobject_put+0x25d/0x290
[    2.312969]  kasan_check_range+0x2ca/0x310
[    2.312969]  __qedf_probe+0x5dcf/0x6bc0
[    2.312969]  ? selinux_kernfs_init_security+0xdc/0x5f0
[    2.312969]  ? trace_rpm_return_int_rcuidle+0x18/0x120
[    2.312969]  ? rpm_resume+0xa5c/0x16e0
[    2.312969]  ? qedf_get_generic_tlv_data+0x160/0x160
[    2.312969]  local_pci_probe+0x13c/0x1f0
[    2.312969]  pci_device_probe+0x37e/0x6c0
---
 drivers/scsi/qedf/qedf_main.c | 5 -----
 1 file changed, 5 deletions(-)
drivers/scsi/qedf/qedf_main.c +0 -5
index b253523217b8..01e27285b26b 100644
@@ -3345,11 +3345,6 @@ static int __qedf_probe(struct pci_dev *pdev, int mode)
 err1:
 	scsi_host_put(lport->host);
 err0:
-	if (qedf) {
-		QEDF_INFO(&qedf->dbg_ctx, QEDF_LOG_DISC, "Probe done.\n");
-
-		clear_bit(QEDF_PROBING, &qedf->flags);
-	}
 	return rc;
 }
 
Signature · 1 line
2.35.1
author maintainer
#5 lore raw

PATCH 6/8 net/ieee802154: fix uninit value bug in dgram_sendmsg

In reply to Sasha Levin

From: Haimin Zhang <[email protected]>

[ Upstream commit 94160108a70c8af17fa1484a37e05181c0e094af ]

There is uninit value bug in dgram_sendmsg function in net/ieee802154/socket.c when the length of valid data pointed by the msg->msg_name isn't verified.

We introducing a helper function ieee802154_sockaddr_check_size to check namelen. First we check there is addr_type in ieee802154_addr_sa. Then, we check namelen according to addr_type.

Also fixed in raw_bind, dgram_bind, dgram_connect.

---
 include/net/ieee802154_netdev.h | 37 +++++++++++++++++++++++++++++
 net/ieee802154/socket.c         | 42 ++++++++++++++++++---------------
 2 files changed, 60 insertions(+), 19 deletions(-)
include/net/ieee802154_netdev.h +37 -0
index c4b31601cd53..fd1665baa179 100644
@@ -23,6 +23,22 @@
 #ifndef IEEE802154_NETDEVICE_H
 #define IEEE802154_NETDEVICE_H
 
+#define IEEE802154_REQUIRED_SIZE(struct_type, member) \
+	(offsetof(typeof(struct_type), member) + \
+	sizeof(((typeof(struct_type) *)(NULL))->member))
+
+#define IEEE802154_ADDR_OFFSET \
+	offsetof(typeof(struct sockaddr_ieee802154), addr)
+
+#define IEEE802154_MIN_NAMELEN (IEEE802154_ADDR_OFFSET + \
+	IEEE802154_REQUIRED_SIZE(struct ieee802154_addr_sa, addr_type))
+
+#define IEEE802154_NAMELEN_SHORT (IEEE802154_ADDR_OFFSET + \
+	IEEE802154_REQUIRED_SIZE(struct ieee802154_addr_sa, short_addr))
+
+#define IEEE802154_NAMELEN_LONG (IEEE802154_ADDR_OFFSET + \
+	IEEE802154_REQUIRED_SIZE(struct ieee802154_addr_sa, hwaddr))
+
 #include <net/af_ieee802154.h>
 #include <linux/netdevice.h>
 #include <linux/skbuff.h>
@@ -173,6 +189,27 @@ static inline void ieee802154_devaddr_to_raw(void *raw, __le64 addr)
 	memcpy(raw, &temp, IEEE802154_ADDR_LEN);
 }
 
+static inline int
+ieee802154_sockaddr_check_size(struct sockaddr_ieee802154 *daddr, int len)
+{
+	struct ieee802154_addr_sa *sa;
+
+	sa = &daddr->addr;
+	if (len < IEEE802154_MIN_NAMELEN)
+		return -EINVAL;
+	switch (sa->addr_type) {
+	case IEEE802154_ADDR_SHORT:
+		if (len < IEEE802154_NAMELEN_SHORT)
+			return -EINVAL;
+		break;
+	case IEEE802154_ADDR_LONG:
+		if (len < IEEE802154_NAMELEN_LONG)
+			return -EINVAL;
+		break;
+	}
+	return 0;
+}
+
 static inline void ieee802154_addr_from_sa(struct ieee802154_addr *a,
 					   const struct ieee802154_addr_sa *sa)
 {
net/ieee802154/socket.c +23 -19

78 lines not on this page · raw message

Signature · 1 line
2.35.1
author maintainer
#6 lore raw

PATCH 7/8 um: Cleanup syscall_handler_t cast in syscalls_32.h

In reply to Sasha Levin

From: Lukas Straub <[email protected]>

[ Upstream commit 61670b4d270c71219def1fbc9441debc2ac2e6e9 ]

Like in f4f03f299a56ce4d73c5431e0327b3b6cb55ebb9 "um: Cleanup syscall_handler_t definition/cast, fix warning", remove the cast to to fix the compiler warning.

---
 arch/x86/um/shared/sysdep/syscalls_32.h | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)
arch/x86/um/shared/sysdep/syscalls_32.h +2 -3
index 68fd2cf526fd..f6e9f84397e7 100644
@@ -6,10 +6,9 @@
 #include <asm/unistd.h>
 #include <sysdep/ptrace.h>
 
-typedef long syscall_handler_t(struct pt_regs);
+typedef long syscall_handler_t(struct syscall_args);
 
 extern syscall_handler_t *sys_call_table[];
 
 #define EXECUTE_SYSCALL(syscall, regs) \
-	((long (*)(struct syscall_args)) \
-	 (*sys_call_table[syscall]))(SYSCALL_ARGS(&regs->regs))
+	((*sys_call_table[syscall]))(SYSCALL_ARGS(&regs->regs))
Signature · 7 lines
2.35.1


_______________________________________________
linux-um mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-um
author maintainer
#7 lore raw

PATCH 8/8 um: Cleanup compiler warning in arch/x86/um/tls_32.c

In reply to Sasha Levin

From: Lukas Straub <[email protected]>

[ Upstream commit d27fff3499671dc23a08efd01cdb8b3764a391c4 ]

arch.tls_array is statically allocated so checking for NULL doesn't make sense. This causes the compiler warning below.

Remove the checks to silence these warnings.

../arch/x86/um/tls_32.c: In function 'get_free_idx':
../arch/x86/um/tls_32.c:68:13: warning: the comparison will always evaluate as 'true' for the address of 'tls_array' will never be NULL [-Waddress]
68 | if (!t->arch.tls_array)
| ^
In file included from ../arch/x86/um/asm/processor.h:10,

                 from ../include/linux/rcupdate.h:30,
                 from ../include/linux/rculist.h:11,
                 from ../include/linux/pid.h:5,
                 from ../include/linux/sched.h:14,
                 from ../arch/x86/um/tls_32.c:7:

../arch/x86/um/asm/processor_32.h:22:31: note: 'tls_array' declared here
22 | struct uml_tls_struct tls_array[GDT_ENTRY_TLS_ENTRIES];
| ^~~~~~~~~
../arch/x86/um/tls_32.c: In function 'get_tls_entry':
../arch/x86/um/tls_32.c:243:13: warning: the comparison will always evaluate as 'true' for the address of 'tls_array' will never be NULL [-Waddress]
243 | if (!t->arch.tls_array)
| ^
../arch/x86/um/asm/processor_32.h:22:31: note: 'tls_array' declared here
22 | struct uml_tls_struct tls_array[GDT_ENTRY_TLS_ENTRIES];
| ^~~~~~~~~

---
 arch/x86/um/tls_32.c | 6 ------
 1 file changed, 6 deletions(-)
arch/x86/um/tls_32.c +0 -6
index 5bd949da7a4a..b69ab2409430 100644
@@ -65,9 +65,6 @@ static int get_free_idx(struct task_struct* task)
 	struct thread_struct *t = &task->thread;
 	int idx;
 
-	if (!t->arch.tls_array)
-		return GDT_ENTRY_TLS_MIN;
-
 	for (idx = 0; idx < GDT_ENTRY_TLS_ENTRIES; idx++)
 		if (!t->arch.tls_array[idx].present)
 			return idx + GDT_ENTRY_TLS_MIN;
@@ -242,9 +239,6 @@ static int get_tls_entry(struct task_struct *task, struct user_desc *info,
 {
 	struct thread_struct *t = &task->thread;
 
-	if (!t->arch.tls_array)
-		goto clear;
-
 	if (idx < GDT_ENTRY_TLS_MIN || idx > GDT_ENTRY_TLS_MAX)
 		return -EINVAL;
 
Signature · 7 lines
2.35.1


_______________________________________________
linux-um mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-um