Skip to contentSkip to conversation

drm/nouveau/nouveau_bo: fix potential memory leak in nouveau_bo_alloc()

PATCH In review Sasha Levin 2 participants 23 messages Oct 9, 2022 – Oct 10, 2022

Subsystems (9)
lore
Share & tools
lore

Sasha Levin

author maintainer
#0 lore raw

PATCH 1/22 drm/nouveau/nouveau_bo: fix potential memory leak in nouveau_bo_alloc()

From: Jianglei Nie <[email protected]>

[ Upstream commit 6dc548745d5b5102e3c53dc5097296ac270b6c69 ]

nouveau_bo_alloc() allocates a memory chunk for "nvbo" with kzalloc(). When some error occurs, "nvbo" should be released. But when WARN_ON(pi < 0)) equals true, the function return ERR_PTR without releasing the "nvbo", which will lead to a memory leak.

We should release the "nvbo" with kfree() if WARN_ON(pi < 0)) equals true.

---
 drivers/gpu/drm/nouveau/nouveau_bo.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/gpu/drm/nouveau/nouveau_bo.c +3 -1
index b4946b595d86..b57dcad8865f 100644
@@ -279,8 +279,10 @@ nouveau_bo_alloc(struct nouveau_cli *cli, u64 *size, int *align, u32 domain,
 			break;
 	}
 
-	if (WARN_ON(pi < 0))
+	if (WARN_ON(pi < 0)) {
+		kfree(nvbo);
 		return ERR_PTR(-EINVAL);
+	}
 
 	/* Disable compression if suitable settings couldn't be found. */
 	if (nvbo->comp && !vmm->page[pi].comp) {
Signature · 1 line
2.35.1
author maintainer
#1 lore raw

PATCH 2/22 drm: Use size_t type for len variable in drm_copy_field()

From: Javier Martinez Canillas <[email protected]>

[ Upstream commit 94dc3471d1b2b58b3728558d0e3f264e9ce6ff59 ]

The strlen() function returns a size_t which is an unsigned int on 32-bit arches and an unsigned long on 64-bit arches. But in the drm_copy_field() function, the strlen() return value is assigned to an 'int len' variable.

Later, the len variable is passed as copy_from_user() third argument that is an unsigned long parameter as well.

In theory, this can lead to an integer overflow via type conversion. Since the assignment happens to a signed int lvalue instead of a size_t lvalue.

In practice though, that's unlikely since the values copied are set by DRM drivers and not controlled by userspace. But using a size_t for len is the correct thing to do anyways.

---
 drivers/gpu/drm/drm_ioctl.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/drm_ioctl.c +1 -1
index 4606cc938b36..a15d55d06510 100644
@@ -473,7 +473,7 @@ EXPORT_SYMBOL(drm_invalid_op);
  */
 static int drm_copy_field(char __user *buf, size_t *buf_len, const char *value)
 {
-	int len;
+	size_t len;
 
 	/* don't overflow userbuf */
 	len = strlen(value);
Signature · 1 line
2.35.1
author maintainer
#2 lore raw

PATCH 3/22 drm: Prevent drm_copy_field() to attempt copying a NULL pointer

In reply to Sasha Levin

From: Javier Martinez Canillas <[email protected]>

[ Upstream commit f6ee30407e883042482ad4ad30da5eaba47872ee ]

There are some struct drm_driver fields that are required by drivers since drm_copy_field() attempts to copy them to user-space via DRM_IOCTL_VERSION.

But it can be possible that a driver has a bug and did not set some of the fields, which leads to drm_copy_field() attempting to copy a NULL pointer:

[ +10.395966] Unable to handle kernel access to user memory outside uaccess routines at virtual address 0000000000000000

[  +0.010955] Mem abort info:
[  +0.002835]   ESR = 0x0000000096000004
[  +0.003872]   EC = 0x25: DABT (current EL), IL = 32 bits
[  +0.005395]   SET = 0, FnV = 0
[  +0.003113]   EA = 0, S1PTW = 0
[  +0.003182]   FSC = 0x04: level 0 translation fault
[  +0.004964] Data abort info:
[  +0.002919]   ISV = 0, ISS = 0x00000004
[  +0.003886]   CM = 0, WnR = 0
[  +0.003040] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000115dad000
[  +0.006536] [0000000000000000] pgd=0000000000000000, p4d=0000000000000000
[  +0.006925] Internal error: Oops: 96000004 [#1] SMP
...
[  +0.011113] pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[  +0.007061] pc : __pi_strlen+0x14/0x150
[  +0.003895] lr : drm_copy_field+0x30/0x1a4
[  +0.004156] sp : ffff8000094b3a50
[  +0.003355] x29: ffff8000094b3a50 x28: ffff8000094b3b70 x27: 0000000000000040
[  +0.007242] x26: ffff443743c2ba00 x25: 0000000000000000 x24: 0000000000000040
[  +0.007243] x23: ffff443743c2ba00 x22: ffff8000094b3b70 x21: 0000000000000000
[  +0.007241] x20: 0000000000000000 x19: ffff8000094b3b90 x18: 0000000000000000
[  +0.007241] x17: 0000000000000000 x16: 0000000000000000 x15: 0000aaab14b9af40
[  +0.007241] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
[  +0.007239] x11: 0000000000000000 x10: 0000000000000000 x9 : ffffa524ad67d4d8
[  +0.007242] x8 : 0101010101010101 x7 : 7f7f7f7f7f7f7f7f x6 : 6c6e6263606e7141
[  +0.007239] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000
[  +0.007241] x2 : 0000000000000000 x1 : ffff8000094b3b90 x0 : 0000000000000000
[  +0.007240] Call trace:
[  +0.002475]  __pi_strlen+0x14/0x150
[  +0.003537]  drm_version+0x84/0xac
[  +0.003448]  drm_ioctl_kernel+0xa8/0x16c
[  +0.003975]  drm_ioctl+0x270/0x580
[  +0.003448]  __arm64_sys_ioctl+0xb8/0xfc
[  +0.003978]  invoke_syscall+0x78/0x100
[  +0.003799]  el0_svc_common.constprop.0+0x4c/0xf4
[  +0.004767]  do_el0_svc+0x38/0x4c
[  +0.003357]  el0_svc+0x34/0x100
[  +0.003185]  el0t_64_sync_handler+0x11c/0x150
[  +0.004418]  el0t_64_sync+0x190/0x194
[  +0.003716] Code: 92402c04 b200c3e8 f13fc09f 5400088c (a9400c02)
[  +0.006180] ---[ end trace 0000000000000000 ]---
---
 drivers/gpu/drm/drm_ioctl.c | 6 ++++++
 1 file changed, 6 insertions(+)
drivers/gpu/drm/drm_ioctl.c +6 -0
index a15d55d06510..c160a45a4274 100644
@@ -475,6 +475,12 @@ static int drm_copy_field(char __user *buf, size_t *buf_len, const char *value)
 {
 	size_t len;
 
+	/* don't attempt to copy a NULL pointer */
+	if (WARN_ONCE(!value, "BUG: the value to copy was not set!")) {
+		*buf_len = 0;
+		return 0;
+	}
+
 	/* don't overflow userbuf */
 	len = strlen(value);
 	if (len > *buf_len)
Signature · 1 line
2.35.1
author maintainer
#3 lore raw

PATCH 4/22 gpu: lontium-lt9611: Fix NULL pointer dereference in lt9611_connector_init()

In reply to Sasha Levin

From: Zeng Jingxiang <[email protected]>

[ Upstream commit ef8886f321c5dab8124b9153d25afa2a71d05323 ]

A NULL check for bridge->encoder shows that it may be NULL, but it already been dereferenced on all paths leading to the check.
812 if (!bridge->encoder) {

Dereference the pointer bridge->encoder.
810 drm_connector_attach_encoder(&lt9611->connector, bridge->encoder);

---
 drivers/gpu/drm/bridge/lontium-lt9611.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/gpu/drm/bridge/lontium-lt9611.c +2 -1
index 29b1ce2140ab..1dcc28a4d853 100644
@@ -816,13 +816,14 @@ static int lt9611_connector_init(struct drm_bridge *bridge, struct lt9611 *lt961
 
 	drm_connector_helper_add(&lt9611->connector,
 				 &lt9611_bridge_connector_helper_funcs);
-	drm_connector_attach_encoder(&lt9611->connector, bridge->encoder);
 
 	if (!bridge->encoder) {
 		DRM_ERROR("Parent encoder object not found");
 		return -ENODEV;
 	}
 
+	drm_connector_attach_encoder(&lt9611->connector, bridge->encoder);
+
 	return 0;
 }
 
Signature · 1 line
2.35.1
author maintainer
#4 lore raw

PATCH 5/22 drm/amd/display: fix overflow on MIN_I64 definition

In reply to Sasha Levin

From: David Gow <[email protected]>

[ Upstream commit 6ae0632d17759852c07e2d1e0a31c728eb6ba246 ]

The definition of MIN_I64 in bw_fixed.c can cause gcc to whinge about integer overflow, because it is treated as a positive value, which is then negated. The temporary positive value is not necessarily representable.

This causes the following warning:
../drivers/gpu/drm/amd/amdgpu/../display/dc/dml/calcs/bw_fixed.c:30:19:
warning: integer overflow in expression ‘-9223372036854775808’ of type ‘long long int’ results in ‘-9223372036854775808’ [-Woverflow]
30 | (int64_t)(-(1LL << 63))
| ^

Writing out (-MAX_I64 - 1) works instead.

---
 drivers/gpu/drm/amd/display/dc/calcs/bw_fixed.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/gpu/drm/amd/display/dc/calcs/bw_fixed.c +3 -3
index 6ca288fb5fb9..2d46bc527b21 100644
@@ -26,12 +26,12 @@
 #include "bw_fixed.h"
 
 
-#define MIN_I64 \
-	(int64_t)(-(1LL << 63))
-
 #define MAX_I64 \
 	(int64_t)((1ULL << 63) - 1)
 
+#define MIN_I64 \
+	(-MAX_I64 - 1)
+
 #define FRACTIONAL_PART_MASK \
 	((1ULL << BW_FIXED_BITS_PER_FRACTIONAL_PART) - 1)
 
Signature · 1 line
2.35.1
author maintainer
#5 lore raw

PATCH 6/22 ALSA: usb-audio: Add quirk to enable Avid Mbox 3 support

In reply to Sasha Levin

From: Conner Knox <[email protected]>

[ Upstream commit b01104fc62b6194c852124f6c6df1c0a5c031fc1 ]

Add support for Avid Mbox3 USB audio interface at 48kHz

---
 sound/usb/quirks-table.h |  76 ++++++++++
 sound/usb/quirks.c       | 302 +++++++++++++++++++++++++++++++++++++++
 2 files changed, 378 insertions(+)
sound/usb/quirks-table.h +76 -0
index 1ac91c46da3c..a7f065567190 100644
@@ -3021,6 +3021,82 @@ AU0828_DEVICE(0x2040, 0x7270, "Hauppauge", "HVR-950Q"),
 		}
 	}
 },
+/* DIGIDESIGN MBOX 3 */
+{
+	USB_DEVICE(0x0dba, 0x5000),
+	.driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
+		.vendor_name = "Digidesign",
+		.product_name = "Mbox 3",
+		.ifnum = QUIRK_ANY_INTERFACE,
+		.type = QUIRK_COMPOSITE,
+		.data = (const struct snd_usb_audio_quirk[]) {
+			{
+				.ifnum = 0,
+				.type = QUIRK_IGNORE_INTERFACE
+			},
+			{
+				.ifnum = 1,
+				.type = QUIRK_IGNORE_INTERFACE
+			},
+			{
+				.ifnum = 2,
+				.type = QUIRK_AUDIO_FIXED_ENDPOINT,
+				.data = &(const struct audioformat) {
+					.formats = SNDRV_PCM_FMTBIT_S24_3LE,
+					.channels = 4,
+					.iface = 2,
+					.altsetting = 1,
+					.altset_idx = 1,
+					.attributes = 0x00,
+					.endpoint = 0x01,
+					.ep_attr = USB_ENDPOINT_XFER_ISOC |
+						USB_ENDPOINT_SYNC_ASYNC,
+					.rates = SNDRV_PCM_RATE_48000,
+					.rate_min = 48000,
+					.rate_max = 48000,
+					.nr_rates = 1,
+					.rate_table = (unsigned int[]) {
+						48000
+					}
+				}
+			},
+			{
+				.ifnum = 3,
+				.type = QUIRK_AUDIO_FIXED_ENDPOINT,
+				.data = &(const struct audioformat) {
+					.formats = SNDRV_PCM_FMTBIT_S24_3LE,
+					.channels = 4,
+					.iface = 3,
+					.altsetting = 1,
+					.altset_idx = 1,
+					.endpoint = 0x81,
+					.attributes = 0x00,
+					.ep_attr = USB_ENDPOINT_XFER_ISOC |
+						USB_ENDPOINT_SYNC_ASYNC,
+					.maxpacksize = 0x009c,
+					.rates = SNDRV_PCM_RATE_48000,
+					.rate_min = 48000,
+					.rate_max = 48000,
+					.nr_rates = 1,
+					.rate_table = (unsigned int[]) {
+						48000
+					}
+				}
+			},
+			{
+				.ifnum = 4,
+				.type = QUIRK_MIDI_FIXED_ENDPOINT,
+				.data = &(const struct snd_usb_midi_endpoint_info) {
+					.out_cables = 0x0001,
+					.in_cables  = 0x0001
+				}
+			},
+			{
+				.ifnum = -1
+			}
+		}
+	}
+},
 {
 	/* Tascam US122 MKII - playback-only support */
 	USB_DEVICE_VENDOR_SPEC(0x0644, 0x8021),
sound/usb/quirks.c +302 -0

314 lines not on this page · raw message

Signature · 1 line
2.35.1
author maintainer
#6 lore raw

PATCH 7/22 udmabuf: Set ubuf->sg = NULL if the creation of sg table fails

In reply to Sasha Levin

From: Vivek Kasireddy <[email protected]>

[ Upstream commit d9c04a1b7a15b5e74b2977461d9511e497f05d8f ]

When userspace tries to map the dmabuf and if for some reason (e.g. OOM) the creation of the sg table fails, ubuf->sg needs to be set to NULL. Otherwise, when the userspace subsequently closes the dmabuf fd, we'd try to erroneously free the invalid sg table from release_udmabuf resulting in the following crash reported by syzbot:

general protection fault, probably for non-canonical address
0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
CPU: 0 PID: 3609 Comm: syz-executor487 Not tainted
5.19.0-syzkaller-13930-g7ebfc85e2cd7 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 07/22/2022
RIP: 0010:dma_unmap_sgtable include/linux/dma-mapping.h:378 [inline]
RIP: 0010:put_sg_table drivers/dma-buf/udmabuf.c:89 [inline]
RIP: 0010:release_udmabuf+0xcb/0x4f0 drivers/dma-buf/udmabuf.c:114
Code: 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 2b 04 00 00 48 8d 7d 0c 4c
8b 63 30 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 14
02 48 89 f8 83 e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85 e2
RSP: 0018:ffffc900037efd30 EFLAGS: 00010246
RAX: dffffc0000000000 RBX: ffffffff8cb67800 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffff84ad27e0 RDI: 0000000000000000
RBP: fffffffffffffff4 R08: 0000000000000005 R09: 0000000000000000
R10: 0000000000000000 R11: 000000000008c07c R12: ffff88801fa05000
R13: ffff888073db07e8 R14: ffff888025c25440 R15: 0000000000000000
FS:  0000555555fc4300(0000) GS:ffff8880b9a00000(0000)
knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fc1c0ce06e4 CR3: 00000000715e6000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
 dma_buf_release+0x157/0x2d0 drivers/dma-buf/dma-buf.c:78
 __dentry_kill+0x42b/0x640 fs/dcache.c:612
 dentry_kill fs/dcache.c:733 [inline]
 dput+0x806/0xdb0 fs/dcache.c:913
 __fput+0x39c/0x9d0 fs/file_table.c:333
 task_work_run+0xdd/0x1a0 kernel/task_work.c:177
 ptrace_notify+0x114/0x140 kernel/signal.c:2353
 ptrace_report_syscall include/linux/ptrace.h:420 [inline]
 ptrace_report_syscall_exit include/linux/ptrace.h:482 [inline]
 syscall_exit_work kernel/entry/common.c:249 [inline]
 syscall_exit_to_user_mode_prepare+0x129/0x280 kernel/entry/common.c:276
 __syscall_exit_to_user_mode_work kernel/entry/common.c:281 [inline]
 syscall_exit_to_user_mode+0x9/0x50 kernel/entry/common.c:294
 do_syscall_64+0x42/0xb0 arch/x86/entry/common.c:86
 entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7fc1c0c35b6b
Code: 0f 05 48 3d 00 f0 ff ff 77 45 c3 0f 1f 40 00 48 83 ec 18 89 7c 24

0c e8 63 fc ff ff 8b 7c 24 0c 41 89 c0 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 35 44 89 c7 89 44 24 0c e8 a1 fc ff ff 8b 44
RSP: 002b:00007ffd78a06090 EFLAGS: 00000293 ORIG_RAX: 0000000000000003
RAX: 0000000000000000 RBX: 0000000000000007 RCX: 00007fc1c0c35b6b
RDX: 0000000020000280 RSI: 0000000040086200 RDI: 0000000000000006
RBP: 0000000000000007 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000293 R12: 000000000000000c
R13: 0000000000000003 R14: 00007fc1c0cfe4a0 R15: 00007ffd78a06140

 </TASK>
Modules linked in:
---[ end trace 0000000000000000 ]---
RIP: 0010:dma_unmap_sgtable include/linux/dma-mapping.h:378 [inline]
RIP: 0010:put_sg_table drivers/dma-buf/udmabuf.c:89 [inline]
RIP: 0010:release_udmabuf+0xcb/0x4f0 drivers/dma-buf/udmabuf.c:114
---
 drivers/dma-buf/udmabuf.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)
drivers/dma-buf/udmabuf.c +6 -3
index b624f3d8f0e6..e359c5c6c4df 100644
@@ -118,17 +118,20 @@ static int begin_cpu_udmabuf(struct dma_buf *buf,
 {
 	struct udmabuf *ubuf = buf->priv;
 	struct device *dev = ubuf->device->this_device;
+	int ret = 0;
 
 	if (!ubuf->sg) {
 		ubuf->sg = get_sg_table(dev, buf, direction);
-		if (IS_ERR(ubuf->sg))
-			return PTR_ERR(ubuf->sg);
+		if (IS_ERR(ubuf->sg)) {
+			ret = PTR_ERR(ubuf->sg);
+			ubuf->sg = NULL;
+		}
 	} else {
 		dma_sync_sg_for_cpu(dev, ubuf->sg->sgl, ubuf->sg->nents,
 				    direction);
 	}
 
-	return 0;
+	return ret;
 }
 
 static int end_cpu_udmabuf(struct dma_buf *buf,
Signature · 1 line
2.35.1
author maintainer
#7 lore raw

PATCH 8/22 drm: bridge: dw_hdmi: only trigger hotplug event on link change

In reply to Sasha Levin

From: Lucas Stach <[email protected]>

[ Upstream commit da09daf881082266e4075657fac53c7966de8e4d ]

There are two events that signal a real change of the link state: HPD going high means the sink is newly connected or wants the source to re-read the EDID, RX sense going low is a indication that the link has been disconnected.

Ignore the other two events that also trigger interrupts, but don't need immediate attention: HPD going low does not necessarily mean the link has been lost and should not trigger a immediate read of the status. RX sense going high also does not require a detect cycle, as HPD going high is the right point in time to read the EDID.

---
 drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)
drivers/gpu/drm/bridge/synopsys/dw-hdmi.c +8 -5
index b10228b9e3a9..356c7d0bd035 100644
@@ -2984,6 +2984,7 @@ static irqreturn_t dw_hdmi_irq(int irq, void *dev_id)
 {
 	struct dw_hdmi *hdmi = dev_id;
 	u8 intr_stat, phy_int_pol, phy_pol_mask, phy_stat;
+	enum drm_connector_status status = connector_status_unknown;
 
 	intr_stat = hdmi_readb(hdmi, HDMI_IH_PHY_STAT0);
 	phy_int_pol = hdmi_readb(hdmi, HDMI_PHY_POL0);
@@ -3022,13 +3023,15 @@ static irqreturn_t dw_hdmi_irq(int irq, void *dev_id)
 			cec_notifier_phys_addr_invalidate(hdmi->cec_notifier);
 			mutex_unlock(&hdmi->cec_notifier_mutex);
 		}
-	}
 
-	if (intr_stat & HDMI_IH_PHY_STAT0_HPD) {
-		enum drm_connector_status status = phy_int_pol & HDMI_PHY_HPD
-						 ? connector_status_connected
-						 : connector_status_disconnected;
+		if (phy_stat & HDMI_PHY_HPD)
+			status = connector_status_connected;
+
+		if (!(phy_stat & (HDMI_PHY_HPD | HDMI_PHY_RX_SENSE)))
+			status = connector_status_disconnected;
+	}
 
+	if (status != connector_status_unknown) {
 		dev_dbg(hdmi->dev, "EVENT=%s\n",
 			status == connector_status_connected ?
 			"plugin" : "plugout");
Signature · 1 line
2.35.1
author maintainer
#8 lore raw

PATCH 9/22 drm: hide unregistered connectors from GETCONNECTOR IOCTL

In reply to Sasha Levin

From: Simon Ser <[email protected]>

[ Upstream commit 981f09295687f856d5345e19c7084aca481c1395 ]

When registering a connector, the kernel sends a hotplug uevent in drm_connector_register(). When unregistering a connector, drivers are expected to send a uevent as well. However, user-space has no way to figure out that the connector isn't registered anymore: it'll still be reported in GETCONNECTOR IOCTLs.

The documentation for DRM_CONNECTOR_UNREGISTERED states:

Quoted 3 lines

The connector […] has since been unregistered and removed from userspace, or the connector was unregistered before it had a chance to be exposed to userspace

---
 drivers/gpu/drm/drm_mode_config.c | 3 +++
 1 file changed, 3 insertions(+)
drivers/gpu/drm/drm_mode_config.c +3 -0
index f1affc1bb679..5ec0157b1426 100644
@@ -150,6 +150,9 @@ int drm_mode_getresources(struct drm_device *dev, void *data,
 	count = 0;
 	connector_id = u64_to_user_ptr(card_res->connector_id_ptr);
 	drm_for_each_connector_iter(connector, &conn_iter) {
+		if (connector->registration_state != DRM_CONNECTOR_REGISTERED)
+			continue;
+
 		/* only expose writeback connectors if userspace understands them */
 		if (!file_priv->writeback_connectors &&
 		    (connector->connector_type == DRM_MODE_CONNECTOR_WRITEBACK))
Signature · 1 line
2.35.1
author maintainer
#9 lore raw

PATCH 10/22 drm/vc4: vec: Fix timings for VEC modes

In reply to Sasha Levin

From: Mateusz Kwiatkowski <[email protected]>

[ Upstream commit 30d7565be96b3946c18a1ce3fd538f7946839092 ]

This commit fixes vertical timings of the VEC (composite output) modes to accurately represent the 525-line ("NTSC") and 625-line ("PAL") ITU-R standards.

Previous timings were actually defined as 502 and 601 lines, resulting in non-standard 62.69 Hz and 52 Hz signals being generated, respectively.

---
 drivers/gpu/drm/vc4/vc4_vec.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/gpu/drm/vc4/vc4_vec.c +2 -2
index bd5b8eb58b18..c6bd168a5898 100644
@@ -257,7 +257,7 @@ static void vc4_vec_ntsc_j_mode_set(struct vc4_vec *vec)
 static const struct drm_display_mode ntsc_mode = {
 	DRM_MODE("720x480", DRM_MODE_TYPE_DRIVER, 13500,
 		 720, 720 + 14, 720 + 14 + 64, 720 + 14 + 64 + 60, 0,
-		 480, 480 + 3, 480 + 3 + 3, 480 + 3 + 3 + 16, 0,
+		 480, 480 + 7, 480 + 7 + 6, 525, 0,
 		 DRM_MODE_FLAG_INTERLACE)
 };
 
@@ -279,7 +279,7 @@ static void vc4_vec_pal_m_mode_set(struct vc4_vec *vec)
 static const struct drm_display_mode pal_mode = {
 	DRM_MODE("720x576", DRM_MODE_TYPE_DRIVER, 13500,
 		 720, 720 + 20, 720 + 20 + 64, 720 + 20 + 64 + 60, 0,
-		 576, 576 + 2, 576 + 2 + 3, 576 + 2 + 3 + 20, 0,
+		 576, 576 + 4, 576 + 4 + 6, 625, 0,
 		 DRM_MODE_FLAG_INTERLACE)
 };
 
Signature · 1 line
2.35.1
author maintainer
#10 lore raw

PATCH 11/22 ACPI: video: Change disable_backlight_sysfs_if quirks to acpi_backlight=native

In reply to Sasha Levin

From: Hans de Goede <[email protected]>

[ Upstream commit c5b94f5b7819348c59f9949b2b75c341a114cdd4 ]

Some Toshibas have a broken acpi-video interface for brightness control and need a special firmware call on resume to turn the panel back on. So far these have been using the disable_backlight_sysfs_if workaround to deal with this.

The recent x86/acpi backlight refactoring has broken this workaround:
1. This workaround relies on acpi_video_get_backlight_type() returning acpi_video so that the acpi_video code actually runs; and
2. this relies on the actual native GPU driver to offer the sysfs backlight interface to userspace.

After the refactor this breaks since the native driver will no longer register its backlight-device if acpi_video_get_backlight_type() does not return native and making it return native breaks 1.

Keeping the acpi_video backlight handling on resume active, while not using it to set the brightness, is necessary because it does a _BCM call on resume which is necessary to turn the panel back on on resume.

Looking at the DSDT shows that this _BCM call results in a Toshiba HCI_SET HCI_LCD_BRIGHTNESS call, which turns the panel back on.

This kind of special vendor specific handling really belongs in the vendor specific acpi driver. An earlier patch in this series modifies toshiba_acpi to make the necessary HCI_SET call on resume on affected models.

With toshiba_acpi taking care of the HCI_SET call on resume, the acpi_video code no longer needs to call _BCM on resume.

So instead of using the (now broken) disable_backlight_sysfs_if workaround, simply setting acpi_backlight=native to disable the broken apci-video interface is sufficient fix things now.

After this there are no more users of the disable_backlight_sysfs_if flag and as discussed above the flag also no longer works as intended, so remove the disable_backlight_sysfs_if flag entirely.

---
 drivers/acpi/acpi_video.c   | 48 -------------------------------------
 drivers/acpi/video_detect.c | 35 +++++++++++++++++++++++++++
 2 files changed, 35 insertions(+), 48 deletions(-)
drivers/acpi/acpi_video.c +0 -48
index eb04b2f828ee..befe7b66c3aa 100644
@@ -50,9 +50,6 @@ module_param(brightness_switch_enabled, bool, 0644);
 static bool allow_duplicates;
 module_param(allow_duplicates, bool, 0644);
 
-static int disable_backlight_sysfs_if = -1;
-module_param(disable_backlight_sysfs_if, int, 0444);
-
 #define REPORT_OUTPUT_KEY_EVENTS		0x01
 #define REPORT_BRIGHTNESS_KEY_EVENTS		0x02
 static int report_key_events = -1;
@@ -384,14 +381,6 @@ static int video_set_bqc_offset(const struct dmi_system_id *d)
 	return 0;
 }
 
-static int video_disable_backlight_sysfs_if(
-	const struct dmi_system_id *d)
-{
-	if (disable_backlight_sysfs_if == -1)
-		disable_backlight_sysfs_if = 1;
-	return 0;
-}
-
 static int video_set_device_id_scheme(const struct dmi_system_id *d)
 {
 	device_id_scheme = true;
@@ -464,40 +453,6 @@ static const struct dmi_system_id video_dmi_table[] = {
 		},
 	},
 
-	/*
-	 * Some machines have a broken acpi-video interface for brightness
-	 * control, but still need an acpi_video_device_lcd_set_level() call
-	 * on resume to turn the backlight power on.  We Enable backlight
-	 * control on these systems, but do not register a backlight sysfs
-	 * as brightness control does not work.
-	 */
-	{
-	 /* https://bugzilla.kernel.org/show_bug.cgi?id=21012 */
-	 .callback = video_disable_backlight_sysfs_if,
-	 .ident = "Toshiba Portege R700",
-	 .matches = {
-		DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
-		DMI_MATCH(DMI_PRODUCT_NAME, "PORTEGE R700"),
-		},
-	},
-	{
-	 /* https://bugs.freedesktop.org/show_bug.cgi?id=82634 */
-	 .callback = video_disable_backlight_sysfs_if,
-	 .ident = "Toshiba Portege R830",
-	 .matches = {
-		DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
-		DMI_MATCH(DMI_PRODUCT_NAME, "PORTEGE R830"),
-		},
-	},
-	{
-	 /* https://bugzilla.kernel.org/show_bug.cgi?id=21012 */
-	 .callback = video_disable_backlight_sysfs_if,
-	 .ident = "Toshiba Satellite R830",
-	 .matches = {
-		DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
-		DMI_MATCH(DMI_PRODUCT_NAME, "SATELLITE R830"),
-		},
-	},
 	/*
 	 * Some machine's _DOD IDs don't have bit 31(Device ID Scheme) set
 	 * but the IDs actually follow the Device ID Scheme.
@@ -1764,9 +1719,6 @@ static void acpi_video_dev_register_backlight(struct acpi_video_device *device)
 	if (result)
 		return;
 
-	if (disable_backlight_sysfs_if > 0)
-		return;
-
 	name = kasprintf(GFP_KERNEL, "acpi_video%d", count);
 	if (!name)
 		return;
drivers/acpi/video_detect.c +35 -0
index e39d59ad6496..3a27f2364159 100644
@@ -500,6 +500,41 @@ static const struct dmi_system_id video_detect_dmi_table[] = {
 		DMI_MATCH(DMI_BOARD_NAME, "PF5LUXG"),
 		},
 	},
+	/*
+	 * These Toshibas have a broken acpi-video interface for brightness
+	 * control. They also have an issue where the panel is off after
+	 * suspend until a special firmware call is made to turn it back
+	 * on. This is handled by the toshiba_acpi kernel module, so that
+	 * module must be enabled for these models to work correctly.
+	 */
+	{
+	 /* https://bugzilla.kernel.org/show_bug.cgi?id=21012 */
+	 .callback = video_detect_force_native,
+	 /* Toshiba Portégé R700 */
+	 .matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "PORTEGE R700"),
+		},
+	},
+	{
+	 /* Portégé: https://bugs.freedesktop.org/show_bug.cgi?id=82634 */
+	 /* Satellite: https://bugzilla.kernel.org/show_bug.cgi?id=21012 */
+	 .callback = video_detect_force_native,
+	 /* Toshiba Satellite/Portégé R830 */
+	 .matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "R830"),
+		},
+	},
+	{
+	 .callback = video_detect_force_native,
+	 /* Toshiba Satellite/Portégé Z830 */
+	 .matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "Z830"),
+		},
+	},
+
 	/*
 	 * Desktops which falsely report a backlight and which our heuristics
 	 * for this do not catch.
Signature · 1 line
2.35.1
#11 lore raw

Re: [PATCH AUTOSEL 5.10 11/22] ACPI: video: Change disable_backlight_sysfs_if quirks to acpi_backlight=native

Hi,

Quoted 38 lines · Sasha Levin

From: Hans de Goede <[email protected]>

[ Upstream commit c5b94f5b7819348c59f9949b2b75c341a114cdd4 ]

Some Toshibas have a broken acpi-video interface for brightness control and need a special firmware call on resume to turn the panel back on. So far these have been using the disable_backlight_sysfs_if workaround to deal with this.

The recent x86/acpi backlight refactoring has broken this workaround:
1. This workaround relies on acpi_video_get_backlight_type() returning acpi_video so that the acpi_video code actually runs; and
2. this relies on the actual native GPU driver to offer the sysfs backlight interface to userspace.

After the refactor this breaks since the native driver will no longer register its backlight-device if acpi_video_get_backlight_type() does not return native and making it return native breaks 1.

Keeping the acpi_video backlight handling on resume active, while not using it to set the brightness, is necessary because it does a _BCM call on resume which is necessary to turn the panel back on on resume.

Looking at the DSDT shows that this _BCM call results in a Toshiba HCI_SET HCI_LCD_BRIGHTNESS call, which turns the panel back on.

This kind of special vendor specific handling really belongs in the vendor specific acpi driver. An earlier patch in this series modifies toshiba_acpi to make the necessary HCI_SET call on resume on affected models.

With toshiba_acpi taking care of the HCI_SET call on resume, the acpi_video code no longer needs to call _BCM on resume.

So instead of using the (now broken) disable_backlight_sysfs_if workaround, simply setting acpi_backlight=native to disable the broken apci-video interface is sufficient fix things now.

Quoted 8 lines

After this there are no more users of the disable_backlight_sysfs_if flag and as discussed above the flag also no longer works as intended, so remove the disable_backlight_sysfs_if flag entirely.

This patch goes hand in hand with:

commit 3cb1f40dfdc3 ("drivers/platform: toshiba_acpi: Call HCI_PANEL_POWER_ON on resume on some models")

and without that commit also being present it will cause a regression on the quirked Toshiba models.

This really is part of the big x86/ACPI backlight handling refactor which has landed in 6.1 and as such is not intended for older kernels, please drop this from the stable series.

Regards,

Hans

Quoted 131 lines
---
 drivers/acpi/acpi_video.c   | 48 -------------------------------------
 drivers/acpi/video_detect.c | 35 +++++++++++++++++++++++++++
 2 files changed, 35 insertions(+), 48 deletions(-)
drivers/acpi/acpi_video.c +0 -48
index eb04b2f828ee..befe7b66c3aa 100644
@@ -50,9 +50,6 @@ module_param(brightness_switch_enabled, bool, 0644);
 static bool allow_duplicates;
 module_param(allow_duplicates, bool, 0644);
 
-static int disable_backlight_sysfs_if = -1;
-module_param(disable_backlight_sysfs_if, int, 0444);
-
 #define REPORT_OUTPUT_KEY_EVENTS		0x01
 #define REPORT_BRIGHTNESS_KEY_EVENTS		0x02
 static int report_key_events = -1;
@@ -384,14 +381,6 @@ static int video_set_bqc_offset(const struct dmi_system_id *d)
 	return 0;
 }
 
-static int video_disable_backlight_sysfs_if(
-	const struct dmi_system_id *d)
-{
-	if (disable_backlight_sysfs_if == -1)
-		disable_backlight_sysfs_if = 1;
-	return 0;
-}
-
 static int video_set_device_id_scheme(const struct dmi_system_id *d)
 {
 	device_id_scheme = true;
@@ -464,40 +453,6 @@ static const struct dmi_system_id video_dmi_table[] = {
 		},
 	},
 
-	/*
-	 * Some machines have a broken acpi-video interface for brightness
-	 * control, but still need an acpi_video_device_lcd_set_level() call
-	 * on resume to turn the backlight power on.  We Enable backlight
-	 * control on these systems, but do not register a backlight sysfs
-	 * as brightness control does not work.
-	 */
-	{
-	 /* https://bugzilla.kernel.org/show_bug.cgi?id=21012 */
-	 .callback = video_disable_backlight_sysfs_if,
-	 .ident = "Toshiba Portege R700",
-	 .matches = {
-		DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
-		DMI_MATCH(DMI_PRODUCT_NAME, "PORTEGE R700"),
-		},
-	},
-	{
-	 /* https://bugs.freedesktop.org/show_bug.cgi?id=82634 */
-	 .callback = video_disable_backlight_sysfs_if,
-	 .ident = "Toshiba Portege R830",
-	 .matches = {
-		DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
-		DMI_MATCH(DMI_PRODUCT_NAME, "PORTEGE R830"),
-		},
-	},
-	{
-	 /* https://bugzilla.kernel.org/show_bug.cgi?id=21012 */
-	 .callback = video_disable_backlight_sysfs_if,
-	 .ident = "Toshiba Satellite R830",
-	 .matches = {
-		DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
-		DMI_MATCH(DMI_PRODUCT_NAME, "SATELLITE R830"),
-		},
-	},
 	/*
 	 * Some machine's _DOD IDs don't have bit 31(Device ID Scheme) set
 	 * but the IDs actually follow the Device ID Scheme.
@@ -1764,9 +1719,6 @@ static void acpi_video_dev_register_backlight(struct acpi_video_device *device)
 	if (result)
 		return;
 
-	if (disable_backlight_sysfs_if > 0)
-		return;
-
 	name = kasprintf(GFP_KERNEL, "acpi_video%d", count);
 	if (!name)
 		return;
drivers/acpi/video_detect.c +35 -0
index e39d59ad6496..3a27f2364159 100644
@@ -500,6 +500,41 @@ static const struct dmi_system_id video_detect_dmi_table[] = {
 		DMI_MATCH(DMI_BOARD_NAME, "PF5LUXG"),
 		},
 	},
+	/*
+	 * These Toshibas have a broken acpi-video interface for brightness
+	 * control. They also have an issue where the panel is off after
+	 * suspend until a special firmware call is made to turn it back
+	 * on. This is handled by the toshiba_acpi kernel module, so that
+	 * module must be enabled for these models to work correctly.
+	 */
+	{
+	 /* https://bugzilla.kernel.org/show_bug.cgi?id=21012 */
+	 .callback = video_detect_force_native,
+	 /* Toshiba Portégé R700 */
+	 .matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "PORTEGE R700"),
+		},
+	},
+	{
+	 /* Portégé: https://bugs.freedesktop.org/show_bug.cgi?id=82634 */
+	 /* Satellite: https://bugzilla.kernel.org/show_bug.cgi?id=21012 */
+	 .callback = video_detect_force_native,
+	 /* Toshiba Satellite/Portégé R830 */
+	 .matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "R830"),
+		},
+	},
+	{
+	 .callback = video_detect_force_native,
+	 /* Toshiba Satellite/Portégé Z830 */
+	 .matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "Z830"),
+		},
+	},
+
 	/*
 	 * Desktops which falsely report a backlight and which our heuristics
 	 * for this do not catch.
author maintainer
#12 lore raw

PATCH 12/22 drm: panel-orientation-quirks: Add quirk for Anbernic Win600

In reply to Sasha Levin

From: Maya Matuszczyk <[email protected]>

[ Upstream commit 770e19076065e079a32f33eb11be2057c87f1cde ]

This device is another x86 gaming handheld, and as (hopefully) there is only one set of DMI IDs it's using DMI_EXACT_MATCH

---
 drivers/gpu/drm/drm_panel_orientation_quirks.c | 6 ++++++
 1 file changed, 6 insertions(+)
drivers/gpu/drm/drm_panel_orientation_quirks.c +6 -0
index f5ab891731d0..083273736c83 100644
@@ -128,6 +128,12 @@ static const struct dmi_system_id orientation_data[] = {
 		  DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "One S1003"),
 		},
 		.driver_data = (void *)&lcd800x1280_rightside_up,
+	}, {	/* Anbernic Win600 */
+		.matches = {
+		  DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "Anbernic"),
+		  DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Win600"),
+		},
+		.driver_data = (void *)&lcd720x1280_rightside_up,
 	}, {	/* Asus T100HA */
 		.matches = {
 		  DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
Signature · 1 line
2.35.1
author maintainer
#13 lore raw

PATCH 13/22 platform/chrome: cros_ec: Notify the PM of wake events during resume

In reply to Sasha Levin

From: Jameson Thies <[email protected]>

[ Upstream commit 8edd2752b0aa498b3a61f3caee8f79f7e0567fad ]

cros_ec_handle_event in the cros_ec driver can notify the PM of wake events. When a device is suspended, cros_ec_handle_event will not check MKBP events. Instead, received MKBP events are checked during resume by cros_ec_report_events_during_suspend. But cros_ec_report_events_during_suspend cannot notify the PM if received events are wake events, causing wake events to not be reported if received while the device is suspended.

Update cros_ec_report_events_during_suspend to notify the PM of wake events during resume by calling pm_wakeup_event.

---
 drivers/platform/chrome/cros_ec.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)
drivers/platform/chrome/cros_ec.c +7 -1
index c4de8c4db193..5a622666a075 100644
@@ -332,10 +332,16 @@ EXPORT_SYMBOL(cros_ec_suspend);
 
 static void cros_ec_report_events_during_suspend(struct cros_ec_device *ec_dev)
 {
+	bool wake_event;
+
 	while (ec_dev->mkbp_event_supported &&
-	       cros_ec_get_next_event(ec_dev, NULL, NULL) > 0)
+	       cros_ec_get_next_event(ec_dev, &wake_event, NULL) > 0) {
 		blocking_notifier_call_chain(&ec_dev->event_notifier,
 					     1, ec_dev);
+
+		if (wake_event && device_may_wakeup(ec_dev->dev))
+			pm_wakeup_event(ec_dev->dev, 0);
+	}
 }
 
 /**
Signature · 1 line
2.35.1
author maintainer
#14 lore raw

PATCH 14/22 platform/x86: msi-laptop: Change DMI match / alias strings to fix module autoloading

In reply to Sasha Levin

From: Hans de Goede <[email protected]>

[ Upstream commit 2a2565272a3628e45d61625e36ef17af7af4e3de ]

On a MSI S270 with Fedora 37 x86_64 / systemd-251.4 the module does not properly autoload.

This is likely caused by issues with how systemd-udevd handles the single quote char (') which is part of the sys_vendor / chassis_vendor strings on this laptop. As a workaround remove the single quote char + everything behind it from the sys_vendor + chassis_vendor matches. This fixes the module not autoloading.

---
 drivers/platform/x86/msi-laptop.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)
drivers/platform/x86/msi-laptop.c +3 -5
index 24ffc8e2d2d1..d8a94968aedc 100644
@@ -596,11 +596,10 @@ static const struct dmi_system_id msi_dmi_table[] __initconst = {
 	{
 		.ident = "MSI S270",
 		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "MICRO-STAR INT'L CO.,LTD"),
+			DMI_MATCH(DMI_SYS_VENDOR, "MICRO-STAR INT"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "MS-1013"),
 			DMI_MATCH(DMI_PRODUCT_VERSION, "0131"),
-			DMI_MATCH(DMI_CHASSIS_VENDOR,
-				  "MICRO-STAR INT'L CO.,LTD")
+			DMI_MATCH(DMI_CHASSIS_VENDOR, "MICRO-STAR INT")
 		},
 		.driver_data = &quirk_old_ec_model,
 		.callback = dmi_check_cb
@@ -633,8 +632,7 @@ static const struct dmi_system_id msi_dmi_table[] __initconst = {
 			DMI_MATCH(DMI_SYS_VENDOR, "NOTEBOOK"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "SAM2000"),
 			DMI_MATCH(DMI_PRODUCT_VERSION, "0131"),
-			DMI_MATCH(DMI_CHASSIS_VENDOR,
-				  "MICRO-STAR INT'L CO.,LTD")
+			DMI_MATCH(DMI_CHASSIS_VENDOR, "MICRO-STAR INT")
 		},
 		.driver_data = &quirk_old_ec_model,
 		.callback = dmi_check_cb
Signature · 1 line
2.35.1
author maintainer
#15 lore raw

PATCH 15/22 ASoC: SOF: pci: Change DMI match info to support all Chrome platforms

In reply to Sasha Levin

From: Jairaj Arava <[email protected]>

[ Upstream commit c1c1fc8103f794a10c5c15e3c17879caf4f42c8f ]

In some Chrome platforms if OEM's use their own string as SYS_VENDOR than "Google", it leads to firmware load failure from intel/sof/community path.

Hence, changing SYS_VENDOR to PRODUCT_FAMILY in which "Google" is used as common prefix and is supported in all Chrome platforms.

---
 sound/soc/sof/sof-pci-dev.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
sound/soc/sof/sof-pci-dev.c +1 -1
index 75657a25dbc0..fe9feaab6a0a 100644
@@ -75,7 +75,7 @@ static const struct dmi_system_id community_key_platforms[] = {
 	{
 		.ident = "Google Chromebooks",
 		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Google"),
+			DMI_MATCH(DMI_PRODUCT_FAMILY, "Google"),
 		}
 	},
 	{},
Signature · 1 line
2.35.1
author maintainer
#16 lore raw

PATCH 16/22 drm/amdgpu: fix initial connector audio value

In reply to Sasha Levin

From: hongao <[email protected]>

[ Upstream commit 4bb71fce58f30df3f251118291d6b0187ce531e6 ]

This got lost somewhere along the way, This fixes
audio not working until set_property was called.

---
 drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)
drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c +6 -1
index df1f9b88a53f..98d3661336a4 100644
@@ -1671,10 +1671,12 @@ amdgpu_connector_add(struct amdgpu_device *adev,
 						   adev->mode_info.dither_property,
 						   AMDGPU_FMT_DITHER_DISABLE);
 
-			if (amdgpu_audio != 0)
+			if (amdgpu_audio != 0) {
 				drm_object_attach_property(&amdgpu_connector->base.base,
 							   adev->mode_info.audio_property,
 							   AMDGPU_AUDIO_AUTO);
+				amdgpu_connector->audio = AMDGPU_AUDIO_AUTO;
+			}
 
 			subpixel_order = SubPixelHorizontalRGB;
 			connector->interlace_allowed = true;
@@ -1796,6 +1798,7 @@ amdgpu_connector_add(struct amdgpu_device *adev,
 				drm_object_attach_property(&amdgpu_connector->base.base,
 							   adev->mode_info.audio_property,
 							   AMDGPU_AUDIO_AUTO);
+				amdgpu_connector->audio = AMDGPU_AUDIO_AUTO;
 			}
 			drm_object_attach_property(&amdgpu_connector->base.base,
 						   adev->mode_info.dither_property,
@@ -1849,6 +1852,7 @@ amdgpu_connector_add(struct amdgpu_device *adev,
 				drm_object_attach_property(&amdgpu_connector->base.base,
 							   adev->mode_info.audio_property,
 							   AMDGPU_AUDIO_AUTO);
+				amdgpu_connector->audio = AMDGPU_AUDIO_AUTO;
 			}
 			drm_object_attach_property(&amdgpu_connector->base.base,
 						   adev->mode_info.dither_property,
@@ -1899,6 +1903,7 @@ amdgpu_connector_add(struct amdgpu_device *adev,
 				drm_object_attach_property(&amdgpu_connector->base.base,
 							   adev->mode_info.audio_property,
 							   AMDGPU_AUDIO_AUTO);
+				amdgpu_connector->audio = AMDGPU_AUDIO_AUTO;
 			}
 			drm_object_attach_property(&amdgpu_connector->base.base,
 						   adev->mode_info.dither_property,
Signature · 1 line
2.35.1
author maintainer
#17 lore raw

PATCH 17/22 drm/meson: explicitly remove aggregate driver at module unload time

In reply to Sasha Levin

From: Adrián Larumbe <[email protected]>

[ Upstream commit 8616f2a0589a80e08434212324250eb22f6a66ce ]

Because component_master_del wasn't being called when unloading the meson_drm module, the aggregate device would linger forever in the global aggregate_devices list. That means when unloading and reloading the meson_dw_hdmi module, component_add would call into try_to_bring_up_aggregate_device and find the unbound meson_drm aggregate device.

This would in turn dereference some of the aggregate_device's struct entries which point to memory automatically freed by the devres API when unbinding the aggregate device from meson_drv_unbind, and trigger an use-after-free bug:

[  +0.000014] =============================================================
[  +0.000007] BUG: KASAN: use-after-free in find_components+0x468/0x500
[  +0.000017] Read of size 8 at addr ffff000006731688 by task modprobe/2536
[  +0.000018] CPU: 4 PID: 2536 Comm: modprobe Tainted: G         C O      5.19.0-rc6-lrmbkasan+ #1
[  +0.000010] Hardware name: Hardkernel ODROID-N2Plus (DT)
[  +0.000008] Call trace:
[  +0.000005]  dump_backtrace+0x1ec/0x280
[  +0.000011]  show_stack+0x24/0x80
[  +0.000007]  dump_stack_lvl+0x98/0xd4
[  +0.000010]  print_address_description.constprop.0+0x80/0x520
[  +0.000011]  print_report+0x128/0x260
[  +0.000007]  kasan_report+0xb8/0xfc
[  +0.000007]  __asan_report_load8_noabort+0x3c/0x50
[  +0.000009]  find_components+0x468/0x500
[  +0.000008]  try_to_bring_up_aggregate_device+0x64/0x390
[  +0.000009]  __component_add+0x1dc/0x49c
[  +0.000009]  component_add+0x20/0x30
[  +0.000008]  meson_dw_hdmi_probe+0x28/0x34 [meson_dw_hdmi]
[  +0.000013]  platform_probe+0xd0/0x220
[  +0.000008]  really_probe+0x3ac/0xa80
[  +0.000008]  __driver_probe_device+0x1f8/0x400
[  +0.000008]  driver_probe_device+0x68/0x1b0
[  +0.000008]  __driver_attach+0x20c/0x480
[  +0.000009]  bus_for_each_dev+0x114/0x1b0
[  +0.000007]  driver_attach+0x48/0x64
[  +0.000009]  bus_add_driver+0x390/0x564
[  +0.000007]  driver_register+0x1a8/0x3e4
[  +0.000009]  __platform_driver_register+0x6c/0x94
[  +0.000007]  meson_dw_hdmi_platform_driver_init+0x30/0x1000 [meson_dw_hdmi]
[  +0.000014]  do_one_initcall+0xc4/0x2b0
[  +0.000008]  do_init_module+0x154/0x570
[  +0.000010]  load_module+0x1a78/0x1ea4
[  +0.000008]  __do_sys_init_module+0x184/0x1cc
[  +0.000008]  __arm64_sys_init_module+0x78/0xb0
[  +0.000008]  invoke_syscall+0x74/0x260
[  +0.000008]  el0_svc_common.constprop.0+0xcc/0x260
[  +0.000009]  do_el0_svc+0x50/0x70
[  +0.000008]  el0_svc+0x68/0x1a0
[  +0.000009]  el0t_64_sync_handler+0x11c/0x150
[  +0.000009]  el0t_64_sync+0x18c/0x190
[  +0.000014] Allocated by task 902:
[  +0.000007]  kasan_save_stack+0x2c/0x5c
[  +0.000009]  __kasan_kmalloc+0x90/0xd0
[  +0.000007]  __kmalloc_node+0x240/0x580
[  +0.000010]  memcg_alloc_slab_cgroups+0xa4/0x1ac
[  +0.000010]  memcg_slab_post_alloc_hook+0xbc/0x4c0
[  +0.000008]  kmem_cache_alloc_node+0x1d0/0x490
[  +0.000009]  __alloc_skb+0x1d4/0x310
[  +0.000010]  alloc_skb_with_frags+0x8c/0x620
[  +0.000008]  sock_alloc_send_pskb+0x5ac/0x6d0
[  +0.000010]  unix_dgram_sendmsg+0x2e0/0x12f0
[  +0.000010]  sock_sendmsg+0xcc/0x110
[  +0.000007]  sock_write_iter+0x1d0/0x304
[  +0.000008]  new_sync_write+0x364/0x460
[  +0.000007]  vfs_write+0x420/0x5ac
[  +0.000008]  ksys_write+0x19c/0x1f0
[  +0.000008]  __arm64_sys_write+0x78/0xb0
[  +0.000007]  invoke_syscall+0x74/0x260
[  +0.000008]  el0_svc_common.constprop.0+0x1a8/0x260
[  +0.000009]  do_el0_svc+0x50/0x70
[  +0.000007]  el0_svc+0x68/0x1a0
[  +0.000008]  el0t_64_sync_handler+0x11c/0x150
[  +0.000008]  el0t_64_sync+0x18c/0x190
[  +0.000013] Freed by task 2509:
[  +0.000008]  kasan_save_stack+0x2c/0x5c
[  +0.000007]  kasan_set_track+0x2c/0x40
[  +0.000008]  kasan_set_free_info+0x28/0x50
[  +0.000008]  ____kasan_slab_free+0x128/0x1d4
[  +0.000008]  __kasan_slab_free+0x18/0x24
[  +0.000007]  slab_free_freelist_hook+0x108/0x230
[  +0.000010]  kfree+0x110/0x35c
[  +0.000008]  release_nodes+0xf0/0x16c
[  +0.000008]  devres_release_all+0xfc/0x180
[  +0.000008]  device_unbind_cleanup+0x24/0x164
[  +0.000008]  device_release_driver_internal+0x3e8/0x5b0
[  +0.000010]  driver_detach+0xac/0x1b0
[  +0.000008]  bus_remove_driver+0x158/0x29c
[  +0.000008]  driver_unregister+0x70/0xb0
[  +0.000009]  platform_driver_unregister+0x20/0x2c
[  +0.000007]  0xffff800003722d98
[  +0.000012]  __do_sys_delete_module+0x288/0x400
[  +0.000009]  __arm64_sys_delete_module+0x5c/0x80
[  +0.000008]  invoke_syscall+0x74/0x260
[  +0.000008]  el0_svc_common.constprop.0+0xcc/0x260
[  +0.000008]  do_el0_svc+0x50/0x70
[  +0.000007]  el0_svc+0x68/0x1a0
[  +0.000008]  el0t_64_sync_handler+0x11c/0x150
[  +0.000009]  el0t_64_sync+0x18c/0x190
[  +0.000013] Last potentially related work creation:
[  +0.000007]  kasan_save_stack+0x2c/0x5c
[  +0.000007]  __kasan_record_aux_stack+0xb8/0xf0
[  +0.000009]  kasan_record_aux_stack_noalloc+0x14/0x20
[  +0.000008]  insert_work+0x54/0x290
[  +0.000009]  __queue_work+0x48c/0xd24
[  +0.000008]  queue_work_on+0x90/0x11c
[  +0.000008]  call_usermodehelper_exec+0x188/0x404
[  +0.000010]  kobject_uevent_env+0x5a8/0x794
[  +0.000010]  kobject_uevent+0x14/0x20
[  +0.000008]  driver_register+0x230/0x3e4
[  +0.000009]  __platform_driver_register+0x6c/0x94
[  +0.000007]  gxbb_driver_init+0x28/0x34
[  +0.000010]  do_one_initcall+0xc4/0x2b0
[  +0.000008]  do_initcalls+0x20c/0x24c
[  +0.000010]  kernel_init_freeable+0x22c/0x278
[  +0.000009]  kernel_init+0x3c/0x170
[  +0.000008]  ret_from_fork+0x10/0x20

[ +0.000013] The buggy address belongs to the object at ffff000006731600
which belongs to the cache kmalloc-256 of size 256
[ +0.000009] The buggy address is located 136 bytes inside of

               256-byte region [ffff000006731600, ffff000006731700)
[  +0.000015] The buggy address belongs to the physical page:
[  +0.000008] page:fffffc000019cc00 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff000006730a00 pfn:0x6730
[  +0.000011] head:fffffc000019cc00 order:2 compound_mapcount:0 compound_pincount:0
[  +0.000008] flags: 0xffff00000010200(slab|head|node=0|zone=0|lastcpupid=0xffff)
[  +0.000016] raw: 0ffff00000010200 fffffc00000c3d08 fffffc0000ef2b08 ffff000000002680
[  +0.000009] raw: ffff000006730a00 0000000000150014 00000001ffffffff 0000000000000000
[  +0.000006] page dumped because: kasan: bad access detected
[  +0.000011] Memory state around the buggy address:
[  +0.000007]  ffff000006731580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  +0.000007]  ffff000006731600: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  +0.000007] >ffff000006731680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  +0.000007]                       ^
[  +0.000006]  ffff000006731700: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  +0.000007]  ffff000006731780: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  +0.000006] ==================================================================

Fix by adding 'remove' driver callback for meson-drm, and explicitly deleting the aggregate device.

---
 drivers/gpu/drm/meson/meson_drv.c | 8 ++++++++
 1 file changed, 8 insertions(+)
drivers/gpu/drm/meson/meson_drv.c +8 -0
index 2d022f3fb437..b0bfe85f5f6a 100644
@@ -528,6 +528,13 @@ static int meson_drv_probe(struct platform_device *pdev)
 	return 0;
 };
 
+static int meson_drv_remove(struct platform_device *pdev)
+{
+	component_master_del(&pdev->dev, &meson_drv_master_ops);
+
+	return 0;
+}
+
 static struct meson_drm_match_data meson_drm_gxbb_data = {
 	.compat = VPU_COMPATIBLE_GXBB,
 };
@@ -565,6 +572,7 @@ static const struct dev_pm_ops meson_drv_pm_ops = {
 
 static struct platform_driver meson_drm_platform_driver = {
 	.probe      = meson_drv_probe,
+	.remove     = meson_drv_remove,
 	.shutdown   = meson_drv_shutdown,
 	.driver     = {
 		.name	= "meson-drm",
Signature · 1 line
2.35.1
author maintainer
#18 lore raw

PATCH 18/22 drm/exynos: Fix return type for mixer_mode_valid and hdmi_mode_valid

In reply to Sasha Levin

From: Nathan Huckleberry <[email protected]>

[ Upstream commit 1261255531088208daeca818e2b486030b5339e5 ]

The field mode_valid in exynos_drm_crtc_ops is expected to be of type enum drm_mode_status (*mode_valid)(struct exynos_drm_crtc *crtc,

                                   const struct drm_display_mode *mode);

Likewise for mode_valid in drm_connector_helper_funcs.

The mismatched return type breaks forward edge kCFI since the underlying function definition does not match the function hook definition.

The return type of mixer_mode_valid and hdmi_mode_valid should be changed from int to enum drm_mode_status.

74fe485cbff6-36ad29bf912d3c9f&q=1&e=5cc06174-77dd-4abd-ab50- 155da5711aa3&u=https%3A%2F%2Fgithub.com%2FClangBuiltLinux%2Flinux%2Fissues%2F 1703

---
 drivers/gpu/drm/exynos/exynos_hdmi.c  | 4 ++--
 drivers/gpu/drm/exynos/exynos_mixer.c | 2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)
drivers/gpu/drm/exynos/exynos_hdmi.c +2 -2
index dc01c188c0e0..d864082b2592 100644
@@ -913,8 +913,8 @@ static int hdmi_find_phy_conf(struct hdmi_context *hdata, u32 pixel_clock)
 	return -EINVAL;
 }
 
-static int hdmi_mode_valid(struct drm_connector *connector,
-			struct drm_display_mode *mode)
+static enum drm_mode_status hdmi_mode_valid(struct drm_connector *connector,
+					    struct drm_display_mode *mode)
 {
 	struct hdmi_context *hdata = connector_to_hdmi(connector);
 	int ret;
drivers/gpu/drm/exynos/exynos_mixer.c +1 -1
index af192e5a16ef..dd038b30e7e9 100644
@@ -1039,7 +1039,7 @@ static void mixer_atomic_disable(struct exynos_drm_crtc *crtc)
 	clear_bit(MXR_BIT_POWERED, &ctx->flags);
 }
 
-static int mixer_mode_valid(struct exynos_drm_crtc *crtc,
+static enum drm_mode_status mixer_mode_valid(struct exynos_drm_crtc *crtc,
 		const struct drm_display_mode *mode)
 {
 	struct mixer_context *ctx = crtc->ctx;
Signature · 1 line
2.35.1
author maintainer
#19 lore raw

PATCH 19/22 mmc: sdhci-msm: add compatible string check for sdm670

In reply to Sasha Levin

From: Richard Acayan <[email protected]>

[ Upstream commit 4de95950d970c71a9e82a24573bb7a44fd95baa1 ]

The Snapdragon 670 has the same quirk as Snapdragon 845 (needing to restore the dll config). Add a compatible string check to detect the need for this.

---
 drivers/mmc/host/sdhci-msm.c | 1 +
 1 file changed, 1 insertion(+)
drivers/mmc/host/sdhci-msm.c +1 -0
index 192cb8b20b47..ad2e73f9a58f 100644
@@ -2182,6 +2182,7 @@ static const struct sdhci_msm_variant_info sm8250_sdhci_var = {
 static const struct of_device_id sdhci_msm_dt_match[] = {
 	{.compatible = "qcom,sdhci-msm-v4", .data = &sdhci_msm_mci_var},
 	{.compatible = "qcom,sdhci-msm-v5", .data = &sdhci_msm_v5_var},
+	{.compatible = "qcom,sdm670-sdhci", .data = &sdm845_sdhci_var},
 	{.compatible = "qcom,sdm845-sdhci", .data = &sdm845_sdhci_var},
 	{.compatible = "qcom,sm8250-sdhci", .data = &sm8250_sdhci_var},
 	{.compatible = "qcom,sc7180-sdhci", .data = &sdm845_sdhci_var},
Signature · 1 line
2.35.1
author maintainer
#20 lore raw

PATCH 20/22 drm/dp: Don't rewrite link config when setting phy test pattern

In reply to Sasha Levin

From: Khaled Almahallawy <[email protected]>

[ Upstream commit 7b4d8db657192066bc6f1f6635d348413dac1e18 ]

The sequence for Source DP PHY CTS automation is [2][1]:
1- Emulate successful Link Training(LT)
2- Short HPD and change link rates and number of lanes by LT. (This is same flow for Link Layer CTS)
3- Short HPD and change PHY test pattern and swing/pre-emphasis levels (This step should not trigger LT)

The problem is with DP PHY compliance setup as follow:

     [DPTX + on board LTTPR]------Main Link--->[Scope]
     	     	        ^                         |
			|                         |
			|                         |
			----------Aux Ch------>[Aux Emulator]

At step 3, before writing TRAINING_LANEx_SET/LINK_QUAL_PATTERN_SET to declare the pattern/swing requested by scope, we write link config in LINK_BW_SET/LANE_COUNT_SET on a port that has LTTPR. As LTTPR snoops aux transaction, LINK_BW_SET/LANE_COUNT_SET writes indicate a LT will start [Check DP 2.0 E11 -Sec 3.6.8.2 & 3.6.8.6.3], and LTTPR will reset the link and stop sending DP signals to DPTX/Scope causing the measurements to fail. Note that step 3 will not trigger LT and DP link will never recovered by the
Aux Emulator/Scope.

The reset of link can be tested with a monitor connected to LTTPR port simply by writing to LINK_BW_SET or LANE_COUNT_SET as follow

  igt/tools/dpcd_reg write --offset=0x100 --value 0x14 --device=2

OR

  printf '\x14' | sudo dd of=/dev/drm_dp_aux2 bs=1 count=1 conv=notrunc
  seek=$((0x100))

This single aux write causes the screen to blank, sending short HPD to DPTX, setting LINK_STATUS_UPDATE = 1 in DPCD 0x204, and triggering LT.

As stated in [1]:
"Before any TX electrical testing can be performed, the link between a DPTX and DPRX (in this case, a piece of test equipment), including all LTTPRs within the path, shall be trained as defined in this Standard."

In addition, changing Phy pattern/Swing/Pre-emphasis (Step 3) uses the same link rate and lane count applied on step 2, so no need to redo LT.

The fix is to not rewrite link config in step 3, and just writes TRAINING_LANEx_SET and LINK_QUAL_PATTERN_SET

[1]: DP 2.0 E11 - 3.6.11.1 LTTPR DPTX_PHY Electrical Compliance

[2]: Configuring UnigrafDPTC Controller - Automation Test Sequence
https://www.keysight.com/us/en/assets/9922-01244/help-files/
D9040DPPC-DisplayPort-Test-Software-Online-Help-latest.chm

---
 drivers/gpu/drm/drm_dp_helper.c | 9 ---------
 1 file changed, 9 deletions(-)
drivers/gpu/drm/drm_dp_helper.c +0 -9
index 3c55753bab16..6ba16db77500 100644
@@ -2172,17 +2172,8 @@ int drm_dp_set_phy_test_pattern(struct drm_dp_aux *aux,
 				struct drm_dp_phy_test_params *data, u8 dp_rev)
 {
 	int err, i;
-	u8 link_config[2];
 	u8 test_pattern;
 
-	link_config[0] = drm_dp_link_rate_to_bw_code(data->link_rate);
-	link_config[1] = data->num_lanes;
-	if (data->enhanced_frame_cap)
-		link_config[1] |= DP_LANE_COUNT_ENHANCED_FRAME_EN;
-	err = drm_dp_dpcd_write(aux, DP_LINK_BW_SET, link_config, 2);
-	if (err < 0)
-		return err;
-
 	test_pattern = data->phy_pattern;
 	if (dp_rev < 0x12) {
 		test_pattern = (test_pattern << 2) &
Signature · 1 line
2.35.1
author maintainer
#21 lore raw

PATCH 21/22 drm/amd/display: Remove interface for periodic interrupt 1

In reply to Sasha Levin

From: Aric Cyr <[email protected]>

[ Upstream commit 97d8d6f075bd8f988589be02b91f6fa644d0b0b8 ]

[why]
Only a single VLINE interrupt is available so interface should not expose the second one which is used by DMU firmware.

[how]
Remove references to periodic_interrupt1 and VLINE1 from DC interfaces.

---
 drivers/gpu/drm/amd/display/dc/core/dc.c      | 16 +++------
 drivers/gpu/drm/amd/display/dc/dc_stream.h    |  6 ++--
 .../amd/display/dc/dcn10/dcn10_hw_sequencer.c | 35 ++++++-------------
 .../amd/display/dc/dcn10/dcn10_hw_sequencer.h |  3 +-
 .../gpu/drm/amd/display/dc/inc/hw_sequencer.h |  8 +----
 5 files changed, 18 insertions(+), 50 deletions(-)
drivers/gpu/drm/amd/display/dc/core/dc.c +4 -12
index 93f5229c303e..99887bcfada0 100644
@@ -2202,11 +2202,8 @@ static void copy_stream_update_to_stream(struct dc *dc,
 	if (update->abm_level)
 		stream->abm_level = *update->abm_level;
 
-	if (update->periodic_interrupt0)
-		stream->periodic_interrupt0 = *update->periodic_interrupt0;
-
-	if (update->periodic_interrupt1)
-		stream->periodic_interrupt1 = *update->periodic_interrupt1;
+	if (update->periodic_interrupt)
+		stream->periodic_interrupt = *update->periodic_interrupt;
 
 	if (update->gamut_remap)
 		stream->gamut_remap_matrix = *update->gamut_remap;
@@ -2288,13 +2285,8 @@ static void commit_planes_do_stream_update(struct dc *dc,
 
 		if (!pipe_ctx->top_pipe &&  !pipe_ctx->prev_odm_pipe && pipe_ctx->stream == stream) {
 
-			if (stream_update->periodic_interrupt0 &&
-					dc->hwss.setup_periodic_interrupt)
-				dc->hwss.setup_periodic_interrupt(dc, pipe_ctx, VLINE0);
-
-			if (stream_update->periodic_interrupt1 &&
-					dc->hwss.setup_periodic_interrupt)
-				dc->hwss.setup_periodic_interrupt(dc, pipe_ctx, VLINE1);
+			if (stream_update->periodic_interrupt && dc->hwss.setup_periodic_interrupt)
+				dc->hwss.setup_periodic_interrupt(dc, pipe_ctx);
 
 			if ((stream_update->hdr_static_metadata && !stream->use_dynamic_meta) ||
 					stream_update->vrr_infopacket ||
drivers/gpu/drm/amd/display/dc/dc_stream.h +2 -4
index 205bedd1b196..0487c1b8957c 100644
@@ -179,8 +179,7 @@ struct dc_stream_state {
 	/* DMCU info */
 	unsigned int abm_level;
 
-	struct periodic_interrupt_config periodic_interrupt0;
-	struct periodic_interrupt_config periodic_interrupt1;
+	struct periodic_interrupt_config periodic_interrupt;
 
 	/* from core_stream struct */
 	struct dc_context *ctx;
@@ -244,8 +243,7 @@ struct dc_stream_update {
 	struct dc_info_packet *hdr_static_metadata;
 	unsigned int *abm_level;
 
-	struct periodic_interrupt_config *periodic_interrupt0;
-	struct periodic_interrupt_config *periodic_interrupt1;
+	struct periodic_interrupt_config *periodic_interrupt;
 
 	struct dc_info_packet *vrr_infopacket;
 	struct dc_info_packet *vsc_infopacket;
drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c +10 -25
index 31a13daf4289..71a85c5306ed 100644
@@ -3611,7 +3611,7 @@ void dcn10_calc_vupdate_position(
 {
 	const struct dc_crtc_timing *dc_crtc_timing = &pipe_ctx->stream->timing;
 	int vline_int_offset_from_vupdate =
-			pipe_ctx->stream->periodic_interrupt0.lines_offset;
+			pipe_ctx->stream->periodic_interrupt.lines_offset;
 	int vupdate_offset_from_vsync = dc->hwss.get_vupdate_offset_from_vsync(pipe_ctx);
 	int start_position;
 
@@ -3636,18 +3636,10 @@ void dcn10_calc_vupdate_position(
 static void dcn10_cal_vline_position(
 		struct dc *dc,
 		struct pipe_ctx *pipe_ctx,
-		enum vline_select vline,
 		uint32_t *start_line,
 		uint32_t *end_line)
 {
-	enum vertical_interrupt_ref_point ref_point = INVALID_POINT;
-
-	if (vline == VLINE0)
-		ref_point = pipe_ctx->stream->periodic_interrupt0.ref_point;
-	else if (vline == VLINE1)
-		ref_point = pipe_ctx->stream->periodic_interrupt1.ref_point;
-
-	switch (ref_point) {
+	switch (pipe_ctx->stream->periodic_interrupt.ref_point) {
 	case START_V_UPDATE:
 		dcn10_calc_vupdate_position(
 				dc,
@@ -3656,7 +3648,9 @@ static void dcn10_cal_vline_position(
 				end_line);
 		break;
 	case START_V_SYNC:
-		// Suppose to do nothing because vsync is 0;
+		// vsync is line 0 so start_line is just the requested line offset
+		*start_line = pipe_ctx->stream->periodic_interrupt.lines_offset;
+		*end_line = *start_line + 2;
 		break;
 	default:
 		ASSERT(0);
@@ -3666,24 +3660,15 @@ static void dcn10_cal_vline_position(
 
 void dcn10_setup_periodic_interrupt(
 		struct dc *dc,
-		struct pipe_ctx *pipe_ctx,
-		enum vline_select vline)
+		struct pipe_ctx *pipe_ctx)
 {
 	struct timing_generator *tg = pipe_ctx->stream_res.tg;
+	uint32_t start_line = 0;
+	uint32_t end_line = 0;
 
-	if (vline == VLINE0) {
-		uint32_t start_line = 0;
-		uint32_t end_line = 0;
+	dcn10_cal_vline_position(dc, pipe_ctx, &start_line, &end_line);
 
-		dcn10_cal_vline_position(dc, pipe_ctx, vline, &start_line, &end_line);
-
-		tg->funcs->setup_vertical_interrupt0(tg, start_line, end_line);
-
-	} else if (vline == VLINE1) {
-		pipe_ctx->stream_res.tg->funcs->setup_vertical_interrupt1(
-				tg,
-				pipe_ctx->stream->periodic_interrupt1.lines_offset);
-	}
+	tg->funcs->setup_vertical_interrupt0(tg, start_line, end_line);
 }
 
 void dcn10_setup_vupdate_interrupt(struct dc *dc, struct pipe_ctx *pipe_ctx)
drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.h +1 -2
index e5691e499023..81b5057d5ff1 100644
@@ -174,8 +174,7 @@ void dcn10_set_cursor_attribute(struct pipe_ctx *pipe_ctx);
 void dcn10_set_cursor_sdr_white_level(struct pipe_ctx *pipe_ctx);
 void dcn10_setup_periodic_interrupt(
 		struct dc *dc,
-		struct pipe_ctx *pipe_ctx,
-		enum vline_select vline);
+		struct pipe_ctx *pipe_ctx);
 enum dc_status dcn10_set_clock(struct dc *dc,
 		enum dc_clock_type clock_type,
 		uint32_t clk_khz,
drivers/gpu/drm/amd/display/dc/inc/hw_sequencer.h +1 -7
index 64c1be818b0e..3165a66c5362 100644
@@ -32,11 +32,6 @@
 #include "inc/hw/link_encoder.h"
 #include "core_status.h"
 
-enum vline_select {
-	VLINE0,
-	VLINE1
-};
-
 struct pipe_ctx;
 struct dc_state;
 struct dc_stream_status;
@@ -112,8 +107,7 @@ struct hw_sequencer_funcs {
 			int group_index, int group_size,
 			struct pipe_ctx *grouped_pipes[]);
 	void (*setup_periodic_interrupt)(struct dc *dc,
-			struct pipe_ctx *pipe_ctx,
-			enum vline_select vline);
+			struct pipe_ctx *pipe_ctx);
 	void (*set_drr)(struct pipe_ctx **pipe_ctx, int num_pipes,
 			unsigned int vmin, unsigned int vmax,
 			unsigned int vmid, unsigned int vmid_frame_number);
Signature · 1 line
2.35.1
author maintainer
#22 lore raw

PATCH 22/22 drm/amd/display: fix array-bounds error in dc_stream_remove_writeback()

In reply to Sasha Levin

From: Hamza Mahfooz <[email protected]>

[ Upstream commit 5d8c3e836fc224dfe633e41f7f2856753b39a905 ]

Address the following error:
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_stream.c: In function ‘dc_stream_remove_writeback’:
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_stream.c:527:55: error: array subscript [0, 0] is outside array bounds of ‘struct dc_writeback_info[1]’ [-Werror=array-bounds]

  527 |                                 stream->writeback_info[j] = stream->writeback_info[i];
      |                                 ~~~~~~~~~~~~~~~~~~~~~~^~~
In file included from ./drivers/gpu/drm/amd/amdgpu/../display/dc/dc.h:1269,
                 from ./drivers/gpu/drm/amd/amdgpu/../display/dc/inc/core_types.h:29,
                 from ./drivers/gpu/drm/amd/amdgpu/../display/dc/basics/dc_common.h:29,
                 from drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_stream.c:27:
./drivers/gpu/drm/amd/amdgpu/../display/dc/dc_stream.h:241:34: note: while referencing ‘writeback_info’
  241 |         struct dc_writeback_info writeback_info[MAX_DWB_PIPES];
      |

Currently, we aren't checking to see if j remains within writeback_info[]'s bounds. So, add a check to make sure that we aren't overflowing the buffer.

---
 drivers/gpu/drm/amd/display/dc/core/dc_stream.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/amd/display/dc/core/dc_stream.c +1 -1
index d48fd87d3b95..867b8b66293a 100644
@@ -491,7 +491,7 @@ bool dc_stream_remove_writeback(struct dc *dc,
 	}
 
 	/* remove writeback info for disabled writeback pipes from stream */
-	for (i = 0, j = 0; i < stream->num_wb_info; i++) {
+	for (i = 0, j = 0; i < stream->num_wb_info && j < MAX_DWB_PIPES; i++) {
 		if (stream->writeback_info[i].wb_enabled) {
 			if (i != j)
 				/* trim the array */
Signature · 1 line
2.35.1