Skip to contentSkip to conversation

Make target send correct io limits

PATCH Superseded Anastasia Kovaleva 1 participant 4 messages Oct 14, 2022

Subsystems (2)

v2 of 3 Superseded Latest is v3 →

lore
Share & tools
lore
#0 lore raw

v2 cover Make target send correct io limits

Currently iblock always reports MAXIMUM TRANSFER LENGTH in 512b units regardless of the LU block size.

Target block size:
target:~ # fdisk -l /dev/nullb0
Disk /dev/nullb0: 250 GiB, 268435456000 bytes, 65536000 sectors
Units: sectors of 1 * 4096 = 4096 bytes
Sector size (logical/physical): 4096 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes

Initiator block size:
initiator:~ # fdisk -l /dev/sdc
Disk /dev/sdc: 250 GiB, 268435456000 bytes, 65536000 sectors Disk model: nullb0
Units: sectors of 1 * 4096 = 4096 bytes
Sector size (logical/physical): 4096 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 131072 bytes

target max transfer length limit:
target:~ # cat /sys/block/nullb0/queue/max_hw_sectors_kb 128

So the maximum transfer length should be 128 * 1024 / 4096 = 32 blocks But the target sends MTL in 512b units, so the initiators see 256 blocks instead.

initiator:~ # sg_inq -p 0xb0 /dev/sdc
VPD INQUIRY: Block limits page (SBC)
Maximum compare and write length: 1 blocks Optimal transfer length granularity: 1 blocks Maximum transfer length: 256 blocks
Optimal transfer length: 32 blocks
Maximum prefetch transfer length: 0 blocks [ignored]

This happens because MAXIMUM TRANSFER LENGTH field in VPD Block Limits page is derived from dev->dev_attrib.hw_max_sectors which happens to be in 512b units for iblock. This patch series fixes this issue and removes some special-casing for other backstores.

The last time this patch set was sent, a kernel bot found some issues with building a kernel for i586 and m68k using a cross-compiler. I tried to reproduce this issues locally but didn't succeed. Even with given configs all things are built correctly without errors. For m68k I used m68k-linux-gnu-gcc version 11.2.0, for i586 I used i586-unknown-linux-gnu-gcc version 8.3.0. It would be great if you could share the kernel bot's cross-compilers.

Anastasia Kovaleva (3):
target: core: Send mtl in blocks
target: core: make hw_max_sectors store the sectors amount in blocks
target: core: Change the way target_xcopy_do_work sets restiction on
max io

 drivers/target/target_core_configfs.c |  2 -
 drivers/target/target_core_file.c     |  1 -
 drivers/target/target_core_iblock.c   |  4 +-
 drivers/target/target_core_spc.c      |  6 +-
 drivers/target/target_core_xcopy.c    | 96 ++++++++++++++-------------
 drivers/target/target_core_xcopy.h    |  2 +-
 include/target/target_core_base.h     |  1 -
 7 files changed, 59 insertions(+), 53 deletions(-)
Signature · 1 line
2.30.2
#1 lore raw

PATCH v2 1/3 target: core: Send mtl in blocks

A MAXIMUM TRANSFER LENGTH value indicates the maximum transfer length in logical blocks that the device server accepts for a single command. Fix function sending the length in sectors instead of blocks.

This patch also removes the special casing for fileio in block_size_store since this logic in now unified in spc_emulate_evpd_b0() for all backends.

---
 drivers/target/target_core_configfs.c | 2 --
 drivers/target/target_core_file.c     | 1 -
 drivers/target/target_core_spc.c      | 6 +++++-
 include/target/target_core_base.h     | 1 -
 4 files changed, 5 insertions(+), 5 deletions(-)
drivers/target/target_core_configfs.c +0 -2
index 416514c5c7ac..a126ae5dca08 100644
@@ -1100,8 +1100,6 @@ static ssize_t block_size_store(struct config_item *item,
 	}
 
 	da->block_size = val;
-	if (da->max_bytes_per_io)
-		da->hw_max_sectors = da->max_bytes_per_io / val;
 
 	pr_debug("dev[%p]: SE Device block_size changed to %u\n",
 			da->da_dev, val);
drivers/target/target_core_file.c +0 -1
index 28aa643be5d5..f9aed9fa8ced 100644
@@ -193,7 +193,6 @@ static int fd_configure_device(struct se_device *dev)
 	}
 
 	dev->dev_attrib.hw_block_size = fd_dev->fd_block_size;
-	dev->dev_attrib.max_bytes_per_io = FD_MAX_BYTES;
 	dev->dev_attrib.hw_max_sectors = FD_MAX_BYTES / fd_dev->fd_block_size;
 	dev->dev_attrib.hw_queue_depth = FD_MAX_DEVICE_QUEUE_DEPTH;
 
drivers/target/target_core_spc.c +5 -1
index 7cca3b15472b..4ab10437c8a9 100644
@@ -519,6 +519,7 @@ spc_emulate_evpd_b0(struct se_cmd *cmd, unsigned char *buf)
 	struct se_device *dev = cmd->se_dev;
 	u32 mtl = 0;
 	int have_tp = 0, opt, min;
+	u32 io_max_blocks;
 
 	/*
 	 * Following spc3r22 section 6.5.3 Block Limits VPD page, when
@@ -557,7 +558,10 @@ spc_emulate_evpd_b0(struct se_cmd *cmd, unsigned char *buf)
 		mtl = (cmd->se_tfo->max_data_sg_nents * PAGE_SIZE) /
 		       dev->dev_attrib.block_size;
 	}
-	put_unaligned_be32(min_not_zero(mtl, dev->dev_attrib.hw_max_sectors), &buf[8]);
+	io_max_blocks = mult_frac(dev->dev_attrib.hw_max_sectors,
+			dev->dev_attrib.hw_block_size,
+			dev->dev_attrib.block_size);
+	put_unaligned_be32(min_not_zero(mtl, io_max_blocks), &buf[8]);
 
 	/*
 	 * Set OPTIMAL TRANSFER LENGTH
include/target/target_core_base.h +0 -1
index 8c920456edd9..cb7acbbdbcfb 100644
@@ -709,7 +709,6 @@ struct se_dev_attrib {
 	u32		unmap_granularity;
 	u32		unmap_granularity_alignment;
 	u32		max_write_same_len;
-	u32		max_bytes_per_io;
 	struct se_device *da_dev;
 	struct config_group da_group;
 };
Signature · 1 line
2.30.2
#2 lore raw

PATCH v2 2/3 target: core: make hw_max_sectors store the sectors amount in blocks

In reply to Anastasia Kovaleva

By default, hw_max_sectors stores its value in 512 blocks in iblock, despite the fact that the block size can be 4096 bytes. Change hw_max_sectors to store the number of sectors in hw_block_size blocks.

---
 drivers/target/target_core_iblock.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/target/target_core_iblock.c +3 -1
index 8351c974cee3..2a704926edb9 100644
@@ -124,7 +124,9 @@ static int iblock_configure_device(struct se_device *dev)
 	q = bdev_get_queue(bd);
 
 	dev->dev_attrib.hw_block_size = bdev_logical_block_size(bd);
-	dev->dev_attrib.hw_max_sectors = queue_max_hw_sectors(q);
+	dev->dev_attrib.hw_max_sectors = mult_frac(queue_max_hw_sectors(q),
+			SECTOR_SIZE,
+			dev->dev_attrib.hw_block_size);
 	dev->dev_attrib.hw_queue_depth = q->nr_requests;
 
 	/*
Signature · 1 line
2.30.2
#3 lore raw

PATCH v2 3/3 target: core: Change the way target_xcopy_do_work sets restiction on max io

In reply to Anastasia Kovaleva

To determine how many blocks sends in one command, the minimum value is selected from the hw_max_sectors of both devices. In target_xcopy_do_work, hw_max_sectors are used as blocks, not sectors; it also ignores the fact that sectors can be of different sizes, for example 512 and 4096 bytes. Because of this, a number of blocks can be transmitted that the device will not be able to accept.

Change the selection of max transmission size into bytes.

---
 drivers/target/target_core_xcopy.c | 96 ++++++++++++++++--------------
 drivers/target/target_core_xcopy.h |  2 +-
 2 files changed, 51 insertions(+), 47 deletions(-)
drivers/target/target_core_xcopy.c +50 -46
index 8713cda0c2fb..55ee74a15746 100644
@@ -582,11 +582,11 @@ static int target_xcopy_read_source(
 	struct xcopy_op *xop,
 	struct se_device *src_dev,
 	sector_t src_lba,
-	u32 src_sectors)
+	u32 src_bytes)
 {
 	struct xcopy_pt_cmd xpt_cmd;
 	struct se_cmd *se_cmd = &xpt_cmd.se_cmd;
-	u32 length = (src_sectors * src_dev->dev_attrib.block_size);
+	u32 transfer_length_block = src_bytes / src_dev->dev_attrib.block_size;
 	int rc;
 	unsigned char cdb[16];
 	bool remote_port = (xop->op_origin == XCOL_DEST_RECV_OP);
@@ -597,11 +597,11 @@ static int target_xcopy_read_source(
 	memset(&cdb[0], 0, 16);
 	cdb[0] = READ_16;
 	put_unaligned_be64(src_lba, &cdb[2]);
-	put_unaligned_be32(src_sectors, &cdb[10]);
-	pr_debug("XCOPY: Built READ_16: LBA: %llu Sectors: %u Length: %u\n",
-		(unsigned long long)src_lba, src_sectors, length);
+	put_unaligned_be32(transfer_length_block, &cdb[10]);
+	pr_debug("XCOPY: Built READ_16: LBA: %llu Blocks: %u Length: %u\n",
+		(unsigned long long)src_lba, transfer_length_block, src_bytes);
 
-	__target_init_cmd(se_cmd, &xcopy_pt_tfo, &xcopy_pt_sess, length,
+	__target_init_cmd(se_cmd, &xcopy_pt_tfo, &xcopy_pt_sess, src_bytes,
 			  DMA_FROM_DEVICE, 0, &xpt_cmd.sense_buffer[0], 0);
 
 	rc = target_xcopy_setup_pt_cmd(&xpt_cmd, xop, src_dev, &cdb[0],
@@ -627,11 +627,11 @@ static int target_xcopy_write_destination(
 	struct xcopy_op *xop,
 	struct se_device *dst_dev,
 	sector_t dst_lba,
-	u32 dst_sectors)
+	u32 dst_bytes)
 {
 	struct xcopy_pt_cmd xpt_cmd;
 	struct se_cmd *se_cmd = &xpt_cmd.se_cmd;
-	u32 length = (dst_sectors * dst_dev->dev_attrib.block_size);
+	u32 transfer_length_block = dst_bytes / dst_dev->dev_attrib.block_size;
 	int rc;
 	unsigned char cdb[16];
 	bool remote_port = (xop->op_origin == XCOL_SOURCE_RECV_OP);
@@ -642,11 +642,11 @@ static int target_xcopy_write_destination(
 	memset(&cdb[0], 0, 16);
 	cdb[0] = WRITE_16;
 	put_unaligned_be64(dst_lba, &cdb[2]);
-	put_unaligned_be32(dst_sectors, &cdb[10]);
-	pr_debug("XCOPY: Built WRITE_16: LBA: %llu Sectors: %u Length: %u\n",
-		(unsigned long long)dst_lba, dst_sectors, length);
+	put_unaligned_be32(transfer_length_block, &cdb[10]);
+	pr_debug("XCOPY: Built WRITE_16: LBA: %llu Blocks: %u Length: %u\n",
+		(unsigned long long)dst_lba, transfer_length_block, dst_bytes);
 
-	__target_init_cmd(se_cmd, &xcopy_pt_tfo, &xcopy_pt_sess, length,
+	__target_init_cmd(se_cmd, &xcopy_pt_tfo, &xcopy_pt_sess, dst_bytes,
 			  DMA_TO_DEVICE, 0, &xpt_cmd.sense_buffer[0], 0);
 
 	rc = target_xcopy_setup_pt_cmd(&xpt_cmd, xop, dst_dev, &cdb[0],
@@ -670,9 +670,10 @@ static void target_xcopy_do_work(struct work_struct *work)
 	struct se_cmd *ec_cmd = xop->xop_se_cmd;
 	struct se_device *src_dev, *dst_dev;
 	sector_t src_lba, dst_lba, end_lba;
-	unsigned int max_sectors;
+	unsigned long long max_bytes, max_bytes_src, max_bytes_dst, max_blocks;
 	int rc = 0;
-	unsigned short nolb, max_nolb, copied_nolb = 0;
+	unsigned short nolb;
+	unsigned int copied_bytes = 0;
 	sense_reason_t sense_rc;
 
 	sense_rc = target_parse_xcopy_cmd(xop);
@@ -691,23 +692,26 @@ static void target_xcopy_do_work(struct work_struct *work)
 	nolb = xop->nolb;
 	end_lba = src_lba + nolb;
 	/*
-	 * Break up XCOPY I/O into hw_max_sectors sized I/O based on the
-	 * smallest max_sectors between src_dev + dev_dev, or
+	 * Break up XCOPY I/O into hw_max_sectors * hw_block_size sized
+	 * I/O based on the smallest max_bytes between src_dev + dst_dev
 	 */
-	max_sectors = min(src_dev->dev_attrib.hw_max_sectors,
-			  dst_dev->dev_attrib.hw_max_sectors);
-	max_sectors = min_t(u32, max_sectors, XCOPY_MAX_SECTORS);
-
-	max_nolb = min_t(u16, max_sectors, ((u16)(~0U)));
-
-	pr_debug("target_xcopy_do_work: nolb: %hu, max_nolb: %hu end_lba: %llu\n",
-			nolb, max_nolb, (unsigned long long)end_lba);
-	pr_debug("target_xcopy_do_work: Starting src_lba: %llu, dst_lba: %llu\n",
+	max_bytes_src = (unsigned long long) src_dev->dev_attrib.hw_max_sectors *
+			src_dev->dev_attrib.hw_block_size;
+	max_bytes_dst = (unsigned long long) dst_dev->dev_attrib.hw_max_sectors *
+			dst_dev->dev_attrib.hw_block_size;
+
+	max_bytes = min_t(u64, max_bytes_src, max_bytes_dst);
+	max_bytes = min_t(u64, max_bytes, XCOPY_MAX_BYTES);
+	max_blocks = max_bytes / src_dev->dev_attrib.block_size;
+
+	pr_debug("%s: nolb: %u, max_blocks: %llu end_lba: %llu\n", __func__,
+			nolb, max_blocks, (unsigned long long)end_lba);
+	pr_debug("%s: Starting src_lba: %llu, dst_lba: %llu\n", __func__,
 			(unsigned long long)src_lba, (unsigned long long)dst_lba);
 
-	while (src_lba < end_lba) {
-		unsigned short cur_nolb = min(nolb, max_nolb);
-		u32 cur_bytes = cur_nolb * src_dev->dev_attrib.block_size;
+	while (nolb) {
+		u32 cur_bytes = min_t(u64, max_bytes, nolb * src_dev->dev_attrib.block_size);
+		unsigned short cur_nolb = cur_bytes / src_dev->dev_attrib.block_size;
 
 		if (cur_bytes != xop->xop_data_bytes) {
 			/*
@@ -724,43 +728,43 @@ static void target_xcopy_do_work(struct work_struct *work)
 			xop->xop_data_bytes = cur_bytes;
 		}
 
-		pr_debug("target_xcopy_do_work: Calling read src_dev: %p src_lba: %llu,"
-			" cur_nolb: %hu\n", src_dev, (unsigned long long)src_lba, cur_nolb);
+		pr_debug("%s: Calling read src_dev: %p src_lba: %llu, cur_nolb: %hu\n",
+				__func__, src_dev, (unsigned long long)src_lba, cur_nolb);
 
-		rc = target_xcopy_read_source(ec_cmd, xop, src_dev, src_lba, cur_nolb);
+		rc = target_xcopy_read_source(ec_cmd, xop, src_dev, src_lba, cur_bytes);
 		if (rc < 0)
 			goto out;
 
-		src_lba += cur_nolb;
-		pr_debug("target_xcopy_do_work: Incremented READ src_lba to %llu\n",
+		src_lba += cur_bytes / src_dev->dev_attrib.block_size;
+		pr_debug("%s: Incremented READ src_lba to %llu\n", __func__,
 				(unsigned long long)src_lba);
 
-		pr_debug("target_xcopy_do_work: Calling write dst_dev: %p dst_lba: %llu,"
-			" cur_nolb: %hu\n", dst_dev, (unsigned long long)dst_lba, cur_nolb);
+		pr_debug("%s: Calling write dst_dev: %p dst_lba: %llu, cur_nolb: %u\n",
+				__func__, dst_dev, (unsigned long long)dst_lba, cur_nolb);
 
 		rc = target_xcopy_write_destination(ec_cmd, xop, dst_dev,
-						dst_lba, cur_nolb);
+						dst_lba, cur_bytes);
 		if (rc < 0)
 			goto out;
 
-		dst_lba += cur_nolb;
-		pr_debug("target_xcopy_do_work: Incremented WRITE dst_lba to %llu\n",
+		dst_lba += cur_bytes / dst_dev->dev_attrib.block_size;
+		pr_debug("%s: Incremented WRITE dst_lba to %llu\n", __func__,
 				(unsigned long long)dst_lba);
 
-		copied_nolb += cur_nolb;
-		nolb -= cur_nolb;
+		copied_bytes += cur_bytes;
+		nolb -= cur_bytes / src_dev->dev_attrib.block_size;
 	}
 
 	xcopy_pt_undepend_remotedev(xop);
 	target_free_sgl(xop->xop_data_sg, xop->xop_data_nents);
 	kfree(xop);
 
-	pr_debug("target_xcopy_do_work: Final src_lba: %llu, dst_lba: %llu\n",
+	pr_debug("%s: Final src_lba: %llu, dst_lba: %llu\n", __func__,
 		(unsigned long long)src_lba, (unsigned long long)dst_lba);
-	pr_debug("target_xcopy_do_work: Blocks copied: %hu, Bytes Copied: %u\n",
-		copied_nolb, copied_nolb * dst_dev->dev_attrib.block_size);
+	pr_debug("%s: Blocks copied: %u, Bytes Copied: %u\n", __func__,
+		copied_bytes / dst_dev->dev_attrib.block_size, copied_bytes);
 
-	pr_debug("target_xcopy_do_work: Setting X-COPY GOOD status -> sending response\n");
+	pr_debug("%s: Setting X-COPY GOOD status -> sending response\n", __func__);
 	target_complete_cmd(ec_cmd, SAM_STAT_GOOD);
 	return;
 
@@ -776,8 +780,8 @@ static void target_xcopy_do_work(struct work_struct *work)
 
 err_free:
 	kfree(xop);
-	pr_warn_ratelimited("target_xcopy_do_work: rc: %d, sense: %u, XCOPY operation failed\n",
-			   rc, sense_rc);
+	pr_warn_ratelimited("%s: rc: %d, sense: %u, XCOPY operation failed\n",
+			   __func__, rc, sense_rc);
 	target_complete_cmd_with_sense(ec_cmd, SAM_STAT_CHECK_CONDITION, sense_rc);
 }
 
drivers/target/target_core_xcopy.h +1 -1
index e5f20005179a..0aad7dc65895 100644
@@ -5,7 +5,7 @@
 #define XCOPY_TARGET_DESC_LEN		32
 #define XCOPY_SEGMENT_DESC_LEN		28
 #define XCOPY_NAA_IEEE_REGEX_LEN	16
-#define XCOPY_MAX_SECTORS		4096
+#define XCOPY_MAX_BYTES			16777216 /* 16 MB */
 
 /*
  * SPC4r37 6.4.6.1
Signature · 1 line
2.30.2