staging: rtl8192e: Added spaces around operators in rtl_cam.c/rtl_eeprom.c
PATCH 1/1 staging: rtl8192e: Added spaces around operators in rtl_cam.c/rtl_eeprom.c
Fixed "spaces preferred around operator" type of problems reported by checkpatch
Signed-off-by Danijel Korent <[email protected]>
--- drivers/staging/rtl8192e/rtl8192e/rtl_cam.c | 23 +++++++++---------- .../staging/rtl8192e/rtl8192e/rtl_eeprom.c | 2 +- 2 files changed, 12 insertions(+), 13 deletions(-)
drivers/staging/rtl8192e/rtl8192e/rtl_cam.c +11 -12
@@ -17,7 +17,7 @@ void rtl92e_cam_reset(struct net_device *dev) {u32 ulcommand =0 ; - ulcommand |=BIT31 |BIT30 ; + ulcommand |=BIT31 |BIT30 ;rtl92e_writel (dev,RWCAM , ulcommand); }
@@ -40,7 +40,6 @@ void rtl92e_enable_hw_security_config(struct net_device *dev) SECR_value |= SCR_TxUseDK; } - ieee->hwsec_active =1 ;if ((ieee->pHTInfo->iot_action &HT_IOT_ACT_PURE_N_MODE ) || !hwwep) { ieee->hwsec_active =0 ;
@@ -100,33 +99,33 @@ void rtl92e_set_key(struct net_device *dev, u8 EntryNo, u8 KeyIndex, }if (DefaultKey) - usConfig |=BIT15 | (KeyType<<2 ); + usConfig |=BIT15 | (KeyType <<2 );else - usConfig |=BIT15 | (KeyType<<2 ) | KeyIndex; + usConfig |=BIT15 | (KeyType <<2 ) | KeyIndex;for (i =0 ; i <CAM_CONTENT_COUNT ; i++) { TargetCommand = i +CAM_CONTENT_COUNT * EntryNo; - TargetCommand |=BIT31 |BIT16 ; + TargetCommand |=BIT31 |BIT16 ;if (i ==0 ) { - TargetContent = (u32)(*(MacAddr+0 )) <<16 | - (u32)(*(MacAddr+1 )) <<24 | + TargetContent = (u32)(*(MacAddr +0 )) <<16 | + (u32)(*(MacAddr +1 )) <<24 | (u32 )usConfig;rtl92e_writel (dev,WCAMI , TargetContent);rtl92e_writel (dev,RWCAM , TargetCommand); }else if (i ==1 ) { - TargetContent = (u32)(*(MacAddr+2 )) | - (u32)(*(MacAddr+3 )) <<8 | - (u32)(*(MacAddr+4 )) <<16 | - (u32)(*(MacAddr+5 )) <<24 ; + TargetContent = (u32)(*(MacAddr +2 )) | + (u32)(*(MacAddr +3 )) <<8 | + (u32)(*(MacAddr +4 )) <<16 | + (u32)(*(MacAddr +5 )) <<24 ;rtl92e_writel (dev,WCAMI , TargetContent);rtl92e_writel (dev,RWCAM , TargetCommand); }else {if (KeyContent !=NULL ) {rtl92e_writel (dev,WCAMI , - (u32)(*(KeyContent+i-2 ))); + (u32)(*(KeyContent + i -2 )));rtl92e_writel (dev,RWCAM , TargetCommand);udelay (100 ); }
drivers/staging/rtl8192e/rtl8192e/rtl_eeprom.c +1 -1
@@ -79,6 +79,6 @@ u32 rtl92e_eeprom_read(struct net_device *dev, u32 addr) ret =_rtl92e_eeprom_xfer (dev, (addr &0x3F ) | (0x6 <<6 ),9 );rtl92e_writeb (dev,EPROM_CMD , - (EPROM_CMD_NORMAL <<EPROM_CMD_OPERATING_MODE_SHIFT )); + (EPROM_CMD_NORMAL <<EPROM_CMD_OPERATING_MODE_SHIFT ));return ret; }
Signature · 1 line
2.34.1