phy: ti: phy-j721e-wiz: add j784s4 support
Subsystems (2)
cover phy: ti: phy-j721e-wiz: add j784s4 support
WIZ modules for J784S4 platform have two input muxes which requires additional mux sections options.
Matt Ranostay (2):
dt-bindings: phy-j721e-wiz: add j784s4 compatible string
phy: ti: phy-j721e-wiz: add j784s4-wiz-10g module support
.../bindings/phy/ti,phy-j721e-wiz.yaml | 1 + drivers/phy/ti/phy-j721e-wiz.c | 22 +++++++++++++++++++ 2 files changed, 23 insertions(+)
Signature · 7 lines
2.38.0.rc0.52.gdda7228a83 -- linux-phy mailing list [email protected] https://lists.infradead.org/mailman/listinfo/linux-phy
PATCH 1/2 dt-bindings: phy-j721e-wiz: add j784s4 compatible string
Add ti,j784s4-wiz-10g compatible string to binding documentation.
--- Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml | 1 + 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml +1 -0
@@ -17,6 +17,7 @@ properties: - ti,j721e-wiz-10g - ti,am64-wiz-10g - ti,j7200-wiz-10g + - ti,j784s4-wiz-10g power-domains: maxItems: 1
Signature · 7 lines
2.38.0.rc0.52.gdda7228a83 -- linux-phy mailing list [email protected] https://lists.infradead.org/mailman/listinfo/linux-phy
Re: [PATCH 1/2] dt-bindings: phy-j721e-wiz: add j784s4 compatible string
Quoted 4 lines · Matt Ranostay
Add ti,j784s4-wiz-10g compatible string to binding documentation.
Signed-off-by Matt Ranostay <[email protected]>---
Best regards,
Krzysztof
Signature · 3 lines
linux-phy mailing list [email protected] https://lists.infradead.org/mailman/listinfo/linux-phy
PATCH 2/2 phy: ti: phy-j721e-wiz: add j784s4-wiz-10g module support
In reply to Matt RanostayAdd support for j784s4-wiz-10g device which has two core reference clocks (e.g core_ref_clk, core_ref1_clk) which requires an additional mux selection option.
--- drivers/phy/ti/phy-j721e-wiz.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+)
drivers/phy/ti/phy-j721e-wiz.c +22 -0
@@ -81,14 +81,20 @@ static const struct reg_field phy_reset_n = REG_FIELD(WIZ_SERDES_RST, 31, 31);static const struct reg_field phy_en_refclk =REG_FIELD (WIZ_SERDES_RST ,30 ,30 );static const struct reg_field pll1_refclk_mux_sel =REG_FIELD (WIZ_SERDES_RST ,29 ,29 ); +static const struct reg_field pll1_refclk_mux_sel_2 = +REG_FIELD (WIZ_SERDES_RST ,22 ,23 );static const struct reg_field pll0_refclk_mux_sel =REG_FIELD (WIZ_SERDES_RST ,28 ,28 ); +static const struct reg_field pll0_refclk_mux_sel_2 = +REG_FIELD (WIZ_SERDES_RST ,28 ,29 );static const struct reg_field refclk_dig_sel_16g =REG_FIELD (WIZ_SERDES_RST ,24 ,25 );static const struct reg_field refclk_dig_sel_10g =REG_FIELD (WIZ_SERDES_RST ,24 ,24 );static const struct reg_field pma_cmn_refclk_int_mode =REG_FIELD (WIZ_SERDES_TOP_CTRL ,28 ,29 ); +static const struct reg_field pma_cmn_refclk1_int_mode = +REG_FIELD (WIZ_SERDES_TOP_CTRL ,20 ,21 );static const struct reg_field pma_cmn_refclk_mode =REG_FIELD (WIZ_SERDES_TOP_CTRL ,30 ,31 ); static const struct reg_field pma_cmn_refclk_dig_div =
@@ -315,6 +321,7 @@ enum wiz_type {J721E_WIZ_10G ,/* Also for J7200 SR1.0 */ AM64_WIZ_10G ,J7200_WIZ_10G ,/* J7200 SR2.0 */ + J784S4_WIZ_10G, }; struct wiz_data {
@@ -992,6 +999,7 @@ static void wiz_clock_cleanup(struct wiz *wiz, struct device_node *node)switch (wiz->type) {case AM64_WIZ_10G :case J7200_WIZ_10G : +case J784S4_WIZ_10G :of_clk_del_provider (dev->of_node);return ;default :
@@ -1123,6 +1131,7 @@ static int wiz_clock_init(struct wiz *wiz, struct device_node *node)switch (wiz->type) {case AM64_WIZ_10G :case J7200_WIZ_10G : +case J784S4_WIZ_10G : ret =wiz_clock_register (wiz);if (ret)dev_err (dev,"Failed to register wiz clocks\n" );
@@ -1299,6 +1308,16 @@ static struct wiz_data j7200_pg2_10g_data = { .clk_div_sel_num = WIZ_DIV_NUM_CLOCKS_10G, }; +static struct wiz_data j784s4_10g_data = { + .type =J784S4_WIZ_10G , + .pll0_refclk_mux_sel = &pll0_refclk_mux_sel_2, + .pll1_refclk_mux_sel = &pll1_refclk_mux_sel_2, + .refclk_dig_sel = &refclk_dig_sel_16g, + .pma_cmn_refclk1_int_mode = &pma_cmn_refclk1_int_mode, + .clk_mux_sel = clk_mux_sel_10g_2_refclk, + .clk_div_sel_num =WIZ_DIV_NUM_CLOCKS_10G , +}; +static const struct of_device_id wiz_id_table[] = { { .compatible ="ti,j721e-wiz-16g" , .data = &j721e_16g_data,
@@ -1312,6 +1331,9 @@ static const struct of_device_id wiz_id_table[] = { { .compatible = "ti,j7200-wiz-10g", .data = &j7200_pg2_10g_data, }, + { + .compatible = "ti,j784s4-wiz-10g", .data = &j784s4_10g_data, + }, {} };MODULE_DEVICE_TABLE (of, wiz_id_table);
Signature · 7 lines
2.38.0.rc0.52.gdda7228a83 -- linux-phy mailing list [email protected] https://lists.infradead.org/mailman/listinfo/linux-phy
Quoted 2 lines · Matt Ranostay
WIZ modules for J784S4 platform have two input muxes which requires additional mux sections options.
Applied, thanks
Signature · 1 line
~Vinod