drm/bridge: tc358767: Set default CLRSIPO count
Subsystems (3)
PATCH 1/1 drm/bridge: tc358767: Set default CLRSIPO count
The current CLRSIPO count is still marginal and does not work with high DSI clock rates in burst mode. Increase it further to allow the DSI link to work at up to 1Gbps lane speed. This returns the counts to defaults as provided by datasheet.
---
Cc: Jonas Karlman <[email protected]>
Cc: Laurent Pinchart <[email protected]>
Cc: Lucas Stach <[email protected]>
Cc: Maxime Ripard <[email protected]>
Cc: Neil Armstrong <[email protected]>
Cc: Robert Foss <[email protected]>
Cc: Sam Ravnborg <[email protected]>
--- drivers/gpu/drm/bridge/tc358767.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/gpu/drm/bridge/tc358767.c +4 -4
@@ -1267,10 +1267,10 @@ static int tc_dsi_rx_enable(struct tc_data *tc)u32 value;int ret; -regmap_write (tc->regmap,PPI_D0S_CLRSIPOCOUNT ,5 ); -regmap_write (tc->regmap,PPI_D1S_CLRSIPOCOUNT ,5 ); -regmap_write (tc->regmap,PPI_D2S_CLRSIPOCOUNT ,5 ); -regmap_write (tc->regmap,PPI_D3S_CLRSIPOCOUNT ,5 ); +regmap_write (tc->regmap,PPI_D0S_CLRSIPOCOUNT ,25 ); +regmap_write (tc->regmap,PPI_D1S_CLRSIPOCOUNT ,25 ); +regmap_write (tc->regmap,PPI_D2S_CLRSIPOCOUNT ,25 ); +regmap_write (tc->regmap,PPI_D3S_CLRSIPOCOUNT ,25 );regmap_write (tc->regmap,PPI_D0S_ATMR ,0 );regmap_write (tc->regmap,PPI_D1S_ATMR ,0 );regmap_write (tc->regmap,PPI_TX_RX_TA ,TTA_GET |TTA_SURE );
Signature · 1 line
2.35.1
Quoted 7 lines · Marek Vasut
The current CLRSIPO count is still marginal and does not work with high DSI clock rates in burst mode. Increase it further to allow the DSI link to work at up to 1Gbps lane speed. This returns the counts to defaults as provided by datasheet.
Fixes ea6490b02240b ("drm/bridge: tc358767: increase CLRSIPO count")Signed-off-by Marek Vasut <[email protected]>
Maxime