arm64: dts: qcom: sdm845-shift-axolotl: fix Bluetooth firmware loading
PATCH 7/7 arm64: dts: qcom: sdm845-shift-axolotl: fix Bluetooth firmware loading
From: Dylan Van Assche <[email protected]>
Add serial1 alias, firmware name and use 4 pin UART pinmux.
--- arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts | 9 +++++++++ 1 file changed, 9 insertions(+)
arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts +9 -0
@@ -22,6 +22,7 @@ / { aliases { display0 = &framebuffer0; + serial1 = &uart6; serial0 = &uart9; };
@@ -693,9 +694,17 @@ config { &uart6 { status = "okay"; + pinctrl-0 = <&qup_uart6_4pin>; + bluetooth { compatible = "qcom,wcn3990-bt"; + /* + * This path is relative to the qca/ + * subdir under lib/firmware. + */ + firmware-name = "axolotl/crnv21.bin"; + vddio-supply = <&vreg_s4a_1p8>; vddxo-supply = <&vreg_l7a_1p8>; vddrf-supply = <&vreg_l17a_1p3>;
--
2.38.0
Quoted 7 lines · Caleb Connolly
From: Dylan Van Assche <[email protected]>
Add serial1 alias, firmware name and use 4 pin UART pinmux.
Signed-off-by Dylan Van Assche <[email protected]>Tested-by Alexander Martinz <[email protected]>Signed-off-by Caleb Connolly <[email protected]>
All your patches - except 1 - are not properly threaded.
Best regards,
Krzysztof
Quoted 10 lines · Krzysztof Kozlowski
Quoted 7 lines · Caleb Connolly
From: Dylan Van Assche <[email protected]>
Add serial1 alias, firmware name and use 4 pin UART pinmux.
Signed-off-by Dylan Van Assche <[email protected]>Tested-by Alexander Martinz <[email protected]>Signed-off-by Caleb Connolly <[email protected]>All your patches - except 1 - are not properly threaded.
Sorry about that! It seems that Protonmail have decided to break In-Reply-To again... I resent the series with threading here:
https://lore.kernel.org/linux-arm-msm/[email protected]/T/#t
Quoted 4 lines
Best regards,
Krzysztof
--
Kind Regards,
Caleb