Skip to contentSkip to conversation

Tegra GCPDMA: Add dma-channel-mask support

PATCH RESEND Superseded Akhil R 2 participants 6 messages Oct 18, 2022 – Oct 20, 2022

Subsystems (4)

v2 of 4 Superseded Latest is v4 →

lore
Share & tools
lore

Akhil R

author
#0 lore raw

v2 cover Tegra GCPDMA: Add dma-channel-mask support

Read dma-channel-mask from device tree and register only the specified channels. This is useful to reserve some channels for the firmware.

Also update the channel number and interrupts to include all 32 channels. The current driver was using only 31 channels as one channel was reserved for firmware. Now with this change, the driver can align more to the actual hardware.

v1->v2:
* Reversed the operands and used BIT macro in 'if' condition.
* Fixed warning reported-by: kernel test robot <[email protected]>

Akhil R (3):
dt-bindings: dmaengine: Add dma-channel-mask to Tegra GPCDMA
arm64: tegra: Add dma-channel-mask in GPCDMA node
dmaengine: tegra: Add support for dma-channel-mask

 .../bindings/dma/nvidia,tegra186-gpc-dma.yaml |  7 +++-
 arch/arm64/boot/dts/nvidia/tegra186.dtsi      |  4 +-
 arch/arm64/boot/dts/nvidia/tegra194.dtsi      |  4 +-
 arch/arm64/boot/dts/nvidia/tegra234.dtsi      |  4 +-
 drivers/dma/tegra186-gpc-dma.c                | 37 +++++++++++++++----
 5 files changed, 45 insertions(+), 11 deletions(-)
Signature · 1 line
2.17.1
author
#1 lore raw

PATCH RESEND v2 1/3 dt-bindings: dmaengine: Add dma-channel-mask to Tegra GPCDMA

Add dma-channel-mask property in Tegra GPCDMA document.

The property would help to specify the channels to be used in kernel and reserve few for the firmware. This was previously achieved by limiting the channel number to 31 in the driver. Now since we can list all 32 channels, update the interrupts property as well to list all 32 interrupts.

---
 .../devicetree/bindings/dma/nvidia,tegra186-gpc-dma.yaml   | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)
Documentation/devicetree/bindings/dma/nvidia,tegra186-gpc-dma.yaml +6 -1
index c8894476b6ab..851bd50ee67f 100644
@@ -39,7 +39,7 @@ properties:
       Should contain all of the per-channel DMA interrupts in
       ascending order with respect to the DMA channel index.
     minItems: 1
-    maxItems: 31
+    maxItems: 32
 
   resets:
     maxItems: 1
@@ -52,6 +52,9 @@ properties:
 
   dma-coherent: true
 
+  dma-channel-mask:
+    maxItems: 1
+
 required:
   - compatible
   - reg
@@ -60,6 +63,7 @@ required:
   - reset-names
   - "#dma-cells"
   - iommus
+  - dma-channel-mask
 
 additionalProperties: false
 
@@ -108,5 +112,6 @@ examples:
         #dma-cells = <1>;
         iommus = <&smmu TEGRA186_SID_GPCDMA_0>;
         dma-coherent;
+        dma-channel-mask = <0xfffffffe>;
     };
 ...
Signature · 1 line
2.17.1
maintainer
#2 lore raw

Re: [PATCH RESEND v2 1/3] dt-bindings: dmaengine: Add dma-channel-mask to Tegra GPCDMA

Quoted 7 lines · Akhil R

Add dma-channel-mask property in Tegra GPCDMA document.

The property would help to specify the channels to be used in kernel and reserve few for the firmware. This was previously achieved by limiting the channel number to 31 in the driver. Now since we can list all 32 channels, update the interrupts property as well to list all 32 interrupts.

Pls cc dt folks and ML on DT patches!

Quoted 47 lines
---
 .../devicetree/bindings/dma/nvidia,tegra186-gpc-dma.yaml   | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)
Documentation/devicetree/bindings/dma/nvidia,tegra186-gpc-dma.yaml +6 -1
index c8894476b6ab..851bd50ee67f 100644
@@ -39,7 +39,7 @@ properties:
       Should contain all of the per-channel DMA interrupts in
       ascending order with respect to the DMA channel index.
     minItems: 1
-    maxItems: 31
+    maxItems: 32
 
   resets:
     maxItems: 1
@@ -52,6 +52,9 @@ properties:
 
   dma-coherent: true
 
+  dma-channel-mask:
+    maxItems: 1
+
 required:
   - compatible
   - reg
@@ -60,6 +63,7 @@ required:
   - reset-names
   - "#dma-cells"
   - iommus
+  - dma-channel-mask
 
 additionalProperties: false
 
@@ -108,5 +112,6 @@ examples:
         #dma-cells = <1>;
         iommus = <&smmu TEGRA186_SID_GPCDMA_0>;
         dma-coherent;
+        dma-channel-mask = <0xfffffffe>;
     };
...
Signature · 1 line
2.17.1
Signature · 1 line
~Vinod
author
#3 lore raw

RE: [PATCH RESEND v2 1/3] dt-bindings: dmaengine: Add dma-channel-mask to Tegra GPCDMA

Quoted 11 lines · Akhil R
Quoted 7 lines

Add dma-channel-mask property in Tegra GPCDMA document.

The property would help to specify the channels to be used in kernel and reserve few for the firmware. This was previously achieved by limiting the channel number to 31 in the driver.
Now since we can list all 32 channels, update the interrupts property as well to list all 32 interrupts.

Pls cc dt folks and ML on DT patches!

Thanks for pointing. Resent the series with DT folks included.

Best Regards,
Akhil

author
#4 lore raw

PATCH RESEND v2 2/3 arm64: tegra: Add dma-channel-mask in GPCDMA node

In reply to Akhil R

Add dma-channel-mask property in Tegra GPCDMA device tree node.

The property would help to specify the channels to be used in kernel and reserve few for the firmware. This was previously achieved by limiting the channel number to 31 in the driver. Now since we can list all 32 channels, update the interrupts property as well to list all 32 interrupts.

---
 arch/arm64/boot/dts/nvidia/tegra186.dtsi | 4 +++-
 arch/arm64/boot/dts/nvidia/tegra194.dtsi | 4 +++-
 arch/arm64/boot/dts/nvidia/tegra234.dtsi | 4 +++-
 3 files changed, 9 insertions(+), 3 deletions(-)
arch/arm64/boot/dts/nvidia/tegra186.dtsi +3 -1
index 6602fe421ee8..db479064ff72 100644
@@ -78,7 +78,8 @@
 		reg = <0x0 0x2600000 0x0 0x210000>;
 		resets = <&bpmp TEGRA186_RESET_GPCDMA>;
 		reset-names = "gpcdma";
-		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+		interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
@@ -112,6 +113,7 @@
 		#dma-cells = <1>;
 		iommus = <&smmu TEGRA186_SID_GPCDMA_0>;
 		dma-coherent;
+		dma-channel-mask = <0xfffffffe>;
 		status = "okay";
 	};
 
arch/arm64/boot/dts/nvidia/tegra194.dtsi +3 -1
index 41f3a7e188d0..b009f8145016 100644
@@ -142,7 +142,8 @@
 			reg = <0x2600000 0x210000>;
 			resets = <&bpmp TEGRA194_RESET_GPCDMA>;
 			reset-names = "gpcdma";
-			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
@@ -176,6 +177,7 @@
 			#dma-cells = <1>;
 			iommus = <&smmu TEGRA194_SID_GPCDMA_0>;
 			dma-coherent;
+			dma-channel-mask = <0xfffffffe>;
 			status = "okay";
 		};
 
arch/arm64/boot/dts/nvidia/tegra234.dtsi +3 -1
index 0170bfa8a467..ccc1a4bd094d 100644
@@ -27,7 +27,8 @@
 			reg = <0x2600000 0x210000>;
 			resets = <&bpmp TEGRA234_RESET_GPCDMA>;
 			reset-names = "gpcdma";
-			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
@@ -60,6 +61,7 @@
 				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
 			#dma-cells = <1>;
 			iommus = <&smmu_niso0 TEGRA234_SID_GPCDMA>;
+			dma-channel-mask = <0xfffffffe>;
 			dma-coherent;
 		};
 
Signature · 1 line
2.17.1
author
#5 lore raw

PATCH RESEND v2 3/3 dmaengine: tegra: Add support for dma-channel-mask

In reply to Akhil R

Add support for dma-channel-mask so that only the specified channels are used. This helps to reserve some channels for the firmware.

This was initially achieved by limiting the channel number to 31 in the driver and adjusting the register address to skip channel0 which was reserved for a firmware. Now, with this change, the driver can align more to the actual hardware which has 32 channels.

---
 drivers/dma/tegra186-gpc-dma.c | 37 +++++++++++++++++++++++++++-------
 1 file changed, 30 insertions(+), 7 deletions(-)
drivers/dma/tegra186-gpc-dma.c +30 -7
index fa9bda4a2bc6..1d1180db6d4e 100644
@@ -161,7 +161,10 @@
 #define TEGRA_GPCDMA_BURST_COMPLETION_TIMEOUT	5000 /* 5 msec */
 
 /* Channel base address offset from GPCDMA base address */
-#define TEGRA_GPCDMA_CHANNEL_BASE_ADD_OFFSET	0x20000
+#define TEGRA_GPCDMA_CHANNEL_BASE_ADDR_OFFSET	0x10000
+
+/* Default channel mask reserving channel0 */
+#define TEGRA_GPCDMA_DEFAULT_CHANNEL_MASK	0xfffffffe
 
 struct tegra_dma;
 struct tegra_dma_channel;
@@ -246,6 +249,7 @@ struct tegra_dma {
 	const struct tegra_dma_chip_data *chip_data;
 	unsigned long sid_m2d_reserved;
 	unsigned long sid_d2m_reserved;
+	u32 chan_mask;
 	void __iomem *base_addr;
 	struct device *dev;
 	struct dma_device dma_dev;
@@ -1288,7 +1292,7 @@ static struct dma_chan *tegra_dma_of_xlate(struct of_phandle_args *dma_spec,
 }
 
 static const struct tegra_dma_chip_data tegra186_dma_chip_data = {
-	.nr_channels = 31,
+	.nr_channels = 32,
 	.channel_reg_size = SZ_64K,
 	.max_dma_count = SZ_1G,
 	.hw_support_pause = false,
@@ -1296,7 +1300,7 @@ static const struct tegra_dma_chip_data tegra186_dma_chip_data = {
 };
 
 static const struct tegra_dma_chip_data tegra194_dma_chip_data = {
-	.nr_channels = 31,
+	.nr_channels = 32,
 	.channel_reg_size = SZ_64K,
 	.max_dma_count = SZ_1G,
 	.hw_support_pause = true,
@@ -1304,7 +1308,7 @@ static const struct tegra_dma_chip_data tegra194_dma_chip_data = {
 };
 
 static const struct tegra_dma_chip_data tegra234_dma_chip_data = {
-	.nr_channels = 31,
+	.nr_channels = 32,
 	.channel_reg_size = SZ_64K,
 	.max_dma_count = SZ_1G,
 	.hw_support_pause = true,
@@ -1380,15 +1384,28 @@ static int tegra_dma_probe(struct platform_device *pdev)
 	}
 	stream_id = iommu_spec->ids[0] & 0xffff;
 
+	ret = device_property_read_u32(&pdev->dev, "dma-channel-mask",
+				       &tdma->chan_mask);
+	if (ret) {
+		dev_warn(&pdev->dev,
+			 "Missing dma-channel-mask property, using default channel mask %#x\n",
+			 TEGRA_GPCDMA_DEFAULT_CHANNEL_MASK);
+		tdma->chan_mask = TEGRA_GPCDMA_DEFAULT_CHANNEL_MASK;
+	}
+
 	INIT_LIST_HEAD(&tdma->dma_dev.channels);
 	for (i = 0; i < cdata->nr_channels; i++) {
 		struct tegra_dma_channel *tdc = &tdma->channels[i];
 
+		/* Check for channel mask */
+		if (!(tdma->chan_mask & BIT(i)))
+			continue;
+
 		tdc->irq = platform_get_irq(pdev, i);
 		if (tdc->irq < 0)
 			return tdc->irq;
 
-		tdc->chan_base_offset = TEGRA_GPCDMA_CHANNEL_BASE_ADD_OFFSET +
+		tdc->chan_base_offset = TEGRA_GPCDMA_CHANNEL_BASE_ADDR_OFFSET +
 					i * cdata->channel_reg_size;
 		snprintf(tdc->name, sizeof(tdc->name), "gpcdma.%d", i);
 		tdc->tdma = tdma;
@@ -1449,8 +1466,8 @@ static int tegra_dma_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	dev_info(&pdev->dev, "GPC DMA driver register %d channels\n",
-		 cdata->nr_channels);
+	dev_info(&pdev->dev, "GPC DMA driver register %lu channels\n",
+		 hweight_long(tdma->chan_mask));
 
 	return 0;
 }
@@ -1473,6 +1490,9 @@ static int __maybe_unused tegra_dma_pm_suspend(struct device *dev)
 	for (i = 0; i < tdma->chip_data->nr_channels; i++) {
 		struct tegra_dma_channel *tdc = &tdma->channels[i];
 
+		if (!(tdma->chan_mask & BIT(i)))
+			continue;
+
 		if (tdc->dma_desc) {
 			dev_err(tdma->dev, "channel %u busy\n", i);
 			return -EBUSY;
@@ -1492,6 +1512,9 @@ static int __maybe_unused tegra_dma_pm_resume(struct device *dev)
 	for (i = 0; i < tdma->chip_data->nr_channels; i++) {
 		struct tegra_dma_channel *tdc = &tdma->channels[i];
 
+		if (!(tdma->chan_mask & BIT(i)))
+			continue;
+
 		tegra_dma_program_sid(tdc, tdc->stream_id);
 	}
 
Signature · 1 line
2.17.1