arm64: tegra: Add SBSA UART for Tegra234
Subsystems (2)
Jon Hunter
maintainerPATCH 1/1 arm64: tegra: Add SBSA UART for Tegra234
Populate the SBSA UART for Tegra234 and enable this UART for Jetson AGX Orin.
Signed-off-by Jon Hunter <[email protected]>
--- .../boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts | 5 +++++ arch/arm64/boot/dts/nvidia/tegra234.dtsi | 7 +++++++ 2 files changed, 12 insertions(+)
arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts +5 -0
@@ -2007,6 +2007,11 @@ serial@3100000 { status = "okay"; }; + serial@31d0000 { + current-speed = <115200>; + status = "okay"; + }; + hda@3510000 { nvidia,model = "NVIDIA Jetson AGX Orin HDA"; status = "okay";
arch/arm64/boot/dts/nvidia/tegra234.dtsi +7 -0
@@ -1324,6 +1324,13 @@ rce-fabric@be00000 { status = "okay"; }; + uarti: serial@31d0000 { + compatible = "arm,sbsa-uart"; + reg = <0x31d0000 0x10000>; + interrupts = <GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + p2u_hsio_0: phy@3e00000 { compatible = "nvidia,tegra234-p2u"; reg = <0x03e00000 0x10000>;
Signature · 1 line
2.25.1
Quoted 8 lines · Jon Hunter
Populate the SBSA UART for Tegra234 and enable this UART for Jetson AGX Orin.
Signed-off-by Jon Hunter <[email protected]>--- .../boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts | 5 +++++ arch/arm64/boot/dts/nvidia/tegra234.dtsi | 7 +++++++ 2 files changed, 12 insertions(+)
Applied, thanks. I noticed that the nodes have become a litte disordered after the P2U nodes were added in commit ec142c44b026 ("arm64: tegra:
Add P2U and PCIe controller nodes to Tegra234 DT"), so I sorted the SBSA UART node correctly and then reordered the remaining nodes correctly.
We should probably have a check for that. I'll see if I can come up with something quickly.
Thierry