DPDK PDUMP pcapng usage
Hi,
i am running DPDK 22.03 on a NXP platform, using 2 eth ports (dpmac, dpni, dprc config should be OK, as i get bursts of packets with testpmd and in a little customized app which is just checking if packets are bursted in mempool.
So then i tried to use pdump and pcapng to write out a capture.pcapng file.
I created mempool and ringbuffer according tot o the dumpcap-example, (rte_eth_dev_configure, rte_eth_dev_adjust_nb_rx_tx_desc, rte_eth_rx/tx_queue_setup, rte_eth_dev_start with the portid i have and which was veryfied by my little customized app as working properly) but when i call enable_pdump i am running into a segmentation fault.
Validation of port, ring, mp, flags are ok.
the problem seems to come from snprintf. There is no different behaviour no matter if i use enable_pdump or enable_pdump_by_deviceID or enable_pdump_bpf. PDUMP seems to have trouble whith my portID or deviceID.
Can you give any hint, what might go wrong here? Or what i could try to get this stuff running? Thanks in advance.
[cid:[email protected]]
Mit freundlichen Grüßen / Best regards
i.A. Sylvia Grundwürmer
Software-Entwicklerin / Software Developer
b-plus GmbH
Ulrichsberger Straße 17 | 94469 Deggendorf
[email protected]
Besucheradresse / Visitor address:
b-plus GmbH
Ulrichsberger Str. 17, 94469 Deggendorf, Germany
Website<http://www.b-plus.com/> | XING<https://www.xing.com/companies/b-plusgmbh> | FACEBOOK<https://www.facebook.com/bplusGmbH/> | LinkedIn<https://www.linkedin.com/company/b-plus-gmbh/>
[cid:[email protected]]<https://karriere.b-plus.com/jobs>
b-plus GmbH
Geschäftsführer / Managing Director: Dipl.-Ing.(FH) Michael Sieg
Gerichtsstand /Handelsregister / Place of jurisdiction / Commercial register: HRB 1753 Deggendorf / Germany
Diese E-Mail enthält vertrauliche und/oder rechtlich geschützte Informationen. Wenn Sie nicht der richtige Adressat sind oder diese E-Mail irrtümlich erhalten haben, informieren Sie bitte sofort den Absender und löschen Sie diese Mail. Das unerlaubte Kopieren sowie die unbefugte Weitergabe dieser Mail ist nicht gestattet. This e-mail may contain confidential and/or privileged information. If you are not the intended recipient (or have received this e-mail in error) please notify the sender immediately and delete this e-mail. Any unauthorized copying, disclosure or distribution of the contents in this e-mail is strictly forbidden.
Quoted 10 lines · On Tue, 11 Oct 2022 15:11:02 +0000 Sylvia Grundwürmer…
Hi,
i am running DPDK 22.03 on a NXP platform, using 2 eth ports (dpmac, dpni, dprc config should be OK, as i get bursts of packets with testpmd and in a little customized app which is just checking if packets are bursted in mempool.
So then i tried to use pdump and pcapng to write out a capture.pcapng file.
I created mempool and ringbuffer according tot o the dumpcap-example, (
rte_eth_dev_configure,rte_eth_dev_adjust_nb_rx_tx_desc, rte_eth_rx/tx_queue_setup,rte_eth_dev_startwith the portid i have and which was veryfied by my little customized app as working properly) but when i callenable_pdumpi am running into a segmentation fault.
Quoted 8 lines
Validation of port, ring, mp, flags are ok.
the problem seems to come from snprintf. There is no different behaviour no matter if i useenable_pdumporenable_pdump_by_deviceIDorenable_pdump_bpf. PDUMP seems to have trouble whith my portID or deviceID.Can you give any hint, what might go wrong here? Or what i could try to get this stuff running? Thanks in advance.
[cid:[email protected]]
Sample code would help, and the dpdk mailing list blocked your image attachment
PATCH 1/1 pdump: do not allow enable/disable in primary process
In reply to Sylvia GrundwürmerAttempts to enable or disable pdump in primary process will fail with core dump because it is not valid to call rte_mp_request_sync() unless in a secondary process.
Trap the error in the common code used for both enable and disable requests.
--- lib/pdump/rte_pdump.c | 6 ++++++ 1 file changed, 6 insertions(+)
lib/pdump/rte_pdump.c +6 -0
@@ -537,6 +537,12 @@ pdump_prepare_client_request(const char *device, uint16_t queue,struct pdump_request *req = (struct pdump_request *)mp_req.param;struct pdump_response *resp; +if (rte_eal_process_type () ==RTE_PROC_PRIMARY ) { +PDUMP_LOG (ERR , +"pdump enable/disable not allowed in primary process\n" ); +return -EINVAL ; + } +memset (req,0 ,sizeof (*req)); req->ver = (flags &RTE_PDUMP_FLAG_PCAPNG ) ?V2 :V1 ;
Signature · 1 line
2.35.1
David Marchand
AppliedRe: [PATCH] pdump: do not allow enable/disable in primary process
Quoted 9 lines · Stephen Hemminger
Attempts to enable or disable pdump in primary process will fail with core dump because it is not valid to call
rte_mp_request_sync()unless in a secondary process.Trap the error in the common code used for both enable and disable requests.
Fixes 660098d61f57 ("pdump: use generic multi-process channel")
Quoted 2 lines
Reported-by Sylvia Grundwürmer <[email protected]>Signed-off-by Stephen Hemminger <[email protected]>
Applied, thanks.
Signature · 1 line
David Marchand