ARM: dts: stm32: Fix AV96 WLAN regulator gpio property
PATCH 1/1 ARM: dts: stm32: Fix AV96 WLAN regulator gpio property
The WLAN regulator uses 'gpios' property instead of 'gpio' to specify regulator enable GPIO. While the former is also currently handled by the Linux kernel regulator-fixed driver, the later is the correct one per DT bindings. Update the DT to use the later.
---
Cc: Alexandre Torgue <[email protected]>
Cc: Patrice Chotard <[email protected]>
Cc: Patrick Delaunay <[email protected]>
Cc: [email protected]
To: [email protected]
--- arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi +1 -1
@@ -99,7 +99,7 @@ wlan_pwr: regulator-wlan { regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpios = <&gpioz 3 GPIO_ACTIVE_HIGH>; + gpio = <&gpioz 3 GPIO_ACTIVE_HIGH>; enable-active-high; }; };
Signature · 7 lines
2.35.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Alexandre TORGUE
maintainerHi Marek
Quoted 22 lines · Marek Vasut
The WLAN regulator uses 'gpios' property instead of 'gpio' to specify regulator enable GPIO. While the former is also currently handled by the Linux kernel regulator-fixed driver, the later is the correct one per DT bindings. Update the DT to use the later.
Fixes 7dd5cbba42c93 ("ARM: dts: stm32: Enable WiFi on AV96")Signed-off-by Marek Vasut <[email protected]>---
Cc: Alexandre Torgue <[email protected]>
Cc: Patrice Chotard <[email protected]>
Cc: Patrick Delaunay <[email protected]>
Cc: [email protected]
To: [email protected]--- arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi +0
-0
arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi wlan_pwr: regulator-wlan { · line 105
Quoted 8 lines
arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi +1
-1@@ -99,7 +99,7 @@ wlan_pwr: regulator-wlan { regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpios = <&gpioz 3 GPIO_ACTIVE_HIGH>; + gpio = <&gpioz 3 GPIO_ACTIVE_HIGH>; enable-active-high; }; };
Applied on stm32-next.
Alex
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel