board: verdin-imx8mm: add call to ft_common_board_setup
PATCH 1/2 board: verdin-imx8mm: add call to ft_common_board_setup
From: Philippe Schenker <[email protected]>
With this call the following attributes get set to the device-tree and are then accessible from linux in /proc/device-tree/
serial-number: The serial number that is stored in config-block toradex,board-rev: The version of the module (e.g. V1.1A) toradex,product-id: The SKU number of the module running
---
board/toradex/verdin-imx8mm/verdin-imx8mm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
board/toradex/verdin-imx8mm/verdin-imx8mm.c +1 -1
@@ -128,6 +128,6 @@ int board_phys_sdram_size(phys_size_t *size)#if defined(CONFIG_OF_LIBFDT ) && defined(CONFIG_OF_BOARD_SETUP )int ft_board_setup (void *blob,struct bd_info *bd) { -return 0 ; +return ft_common_board_setup (blob, bd); }#endif
Signature · 1 line
2.37.2
PATCH 2/2 board: verdin-imx8mp: add call to ft_common_board_setup
From: Philippe Schenker <[email protected]>
With this call the following attributes get set to the device-tree and are then accessible from linux in /proc/device-tree/
serial-number: The serial number that is stored in config-block toradex,board-rev: The version of the module (e.g. V1.1A) toradex,product-id: The SKU number of the module runnin
---
board/toradex/verdin-imx8mp/verdin-imx8mp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
board/toradex/verdin-imx8mp/verdin-imx8mp.c +1 -1
@@ -124,6 +124,6 @@ int board_late_init(void)#if IS_ENABLED (CONFIG_OF_LIBFDT ) &&IS_ENABLED (CONFIG_OF_BOARD_SETUP )int ft_board_setup (void *blob,struct bd_info *bd) { -return 0 ; +return ft_common_board_setup (blob, bd); }#endif
Signature · 1 line
2.37.2
Re: [PATCH 2/2] board: verdin-imx8mp: add call to ft_common_board_setup
Quoted 11 lines · Philippe Schenker
From: Philippe Schenker <[email protected]>
With this call the following attributes get set to the device-tree and are then accessible from linux in
/proc/device-tree/serial-number: The serial number that is stored in config-block toradex,board-rev: The version of the module (e.g. V1.1A) toradex,product-id: The SKU number of the module runnin
Fixes commit 2bc2f817cea7 ("board: toradex: add verdin imx8m plus support")Signed-off-by Philippe Schenker <[email protected]>
Quoted 17 lines
---
board/toradex/verdin-imx8mp/verdin-imx8mp.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)board/toradex/verdin-imx8mp/verdin-imx8mp.c +1
-1@@ -124,6 +124,6 @@ int board_late_init(void) #if IS_ENABLED(CONFIG_OF_LIBFDT) && IS_ENABLED(CONFIG_OF_BOARD_SETUP) int ft_board_setup(void *blob, struct bd_info *bd) { - return 0; + return ft_common_board_setup(blob, bd); } #endif
PATCH 2/2 board: verdin-imx8mp: add call to ft_common_board_setup
In reply to Philippe SchenkerQuoted 9 lines
From: Philippe Schenker <[email protected]> With this call the following attributes get set to the device-tree and are then accessible from linux in
/proc/device-tree/
serial-number: The serial number that is stored in config-block toradex,board-rev: The version of the module (e.g. V1.1A) toradex,product-id: The SKU number of the module runninFixes commit 2bc2f817cea7 ("board: toradex: add verdin imx8m plus support")Signed-off-by Philippe Schenker <[email protected]>Acked-by Marcel Ziswiler <[email protected]>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected] =====================================================================
Quoted 11 lines · Philippe Schenker
From: Philippe Schenker <[email protected]>
With this call the following attributes get set to the device-tree and are then accessible from linux in
/proc/device-tree/serial-number: The serial number that is stored in config-block toradex,board-rev: The version of the module (e.g. V1.1A) toradex,product-id: The SKU number of the module running
Fixes commit 14d5aeff776b ("board: toradex: Add Verdin iMX8M Mini support")Signed-off-by Philippe Schenker <[email protected]>
Quoted 17 lines
---
board/toradex/verdin-imx8mm/verdin-imx8mm.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)board/toradex/verdin-imx8mm/verdin-imx8mm.c +1
-1@@ -128,6 +128,6 @@ int board_phys_sdram_size(phys_size_t *size) #if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) int ft_board_setup(void *blob, struct bd_info *bd) { - return 0; + return ft_common_board_setup(blob, bd); } #endif
PATCH 1/2 board: verdin-imx8mm: add call to ft_common_board_setup
In reply to Philippe SchenkerQuoted 9 lines
From: Philippe Schenker <[email protected]> With this call the following attributes get set to the device-tree and are then accessible from linux in
/proc/device-tree/
serial-number: The serial number that is stored in config-block toradex,board-rev: The version of the module (e.g. V1.1A) toradex,product-id: The SKU number of the module runningFixes commit 14d5aeff776b ("board: toradex: Add Verdin iMX8M Mini support")Signed-off-by Philippe Schenker <[email protected]>Acked-by Marcel Ziswiler <[email protected]>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected] =====================================================================