Skip to contentSkip to conversation

Accessiblity: speakup_apollo: specifying the default driver parameters among the module params

PATCH In review Osama Muhammad 2 participants 2 messages Oct 21, 2022 – Oct 22, 2022 Speakup console speech driver

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 Accessiblity: speakup_apollo: specifying the default driver parameters among the module params

This is an enhancement which allows to specify the default driver parameters among the module parameters.

Adding default variables to the speakup_apollo module allows to easily set that at boot, rather than setting the sys variables after boot.
More details can be found here:
https://github.com/linux-speakup/speakup/issues/7

---
 .../accessibility/speakup/speakup_apollo.c    | 46 +++++++++++++++----
 1 file changed, 37 insertions(+), 9 deletions(-)
drivers/accessibility/speakup/speakup_apollo.c +37 -9
index c84a7e0864b7..d2fbb3f57221 100644
@@ -24,15 +24,28 @@
 
 static void do_catch_up(struct spk_synth *synth);
 
-static struct var_t vars[] = {
-	{ CAPS_START, .u.s = {"cap, " } },
-	{ CAPS_STOP, .u.s = {"" } },
-	{ RATE, .u.n = {"@W%d", 6, 1, 9, 0, 0, NULL } },
-	{ PITCH, .u.n = {"@F%x", 10, 0, 15, 0, 0, NULL } },
-	{ VOL, .u.n = {"@A%x", 10, 0, 15, 0, 0, NULL } },
-	{ VOICE, .u.n = {"@V%d", 1, 1, 6, 0, 0, NULL } },
-	{ LANG, .u.n = {"@=%d,", 1, 1, 4, 0, 0, NULL } },
-	{ DIRECT, .u.n = {NULL, 0, 0, 1, 0, 0, NULL } },
+
+
+enum default_vars_id {
+	CAPS_START_ID = 0, CAPS_STOP_ID,
+	RATE_ID, PITCH_ID,
+	VOL_ID, VOICE_ID, LANG_ID,
+	DIRECT_ID, V_LAST_VAR_ID,
+	NB_ID
+};
+
+
+
+
+static struct var_t vars[NB_ID] = {
+	[CAPS_START_ID] = { CAPS_START, .u.s = {"cap, " } },
+	[CAPS_STOP_ID] = { CAPS_STOP, .u.s = {"" } },
+	[RATE_ID] = { RATE, .u.n = {"@W%d", 6, 1, 9, 0, 0, NULL } },
+	[PITCH_ID] = { PITCH, .u.n = {"@F%x", 10, 0, 15, 0, 0, NULL } },
+	[VOL_ID] = { VOL, .u.n = {"@A%x", 10, 0, 15, 0, 0, NULL } },
+	[VOICE_ID] = { VOICE, .u.n = {"@V%d", 1, 1, 6, 0, 0, NULL } },
+	[LANG_ID] = { LANG, .u.n = {"@=%d,", 1, 1, 4, 0, 0, NULL } },
+	[DIRECT_ID] = { DIRECT, .u.n = {NULL, 0, 0, 1, 0, 0, NULL } },
 	V_LAST_VAR
 };
 
@@ -193,10 +206,25 @@ static void do_catch_up(struct spk_synth *synth)
 module_param_named(ser, synth_apollo.ser, int, 0444);
 module_param_named(dev, synth_apollo.dev_name, charp, 0444);
 module_param_named(start, synth_apollo.startup, short, 0444);
+module_param_named(rate, vars[RATE_ID].u.n.default_val, int, 0444);
+module_param_named(pitch, vars[PITCH_ID].u.n.default_val, int, 0444);
+module_param_named(vol, vars[VOL_ID].u.n.default_val, int, 0444);
+module_param_named(voice, vars[VOICE_ID].u.n.default_val, int, 0444);
+module_param_named(lang, vars[LANG_ID].u.n.default_val, int, 0444);
+module_param_named(direct, vars[DIRECT_ID].u.n.default_val, int, 0444);
+
 
 MODULE_PARM_DESC(ser, "Set the serial port for the synthesizer (0-based).");
 MODULE_PARM_DESC(dev, "Set the device e.g. ttyUSB0, for the synthesizer.");
 MODULE_PARM_DESC(start, "Start the synthesizer once it is loaded.");
+MODULE_PARM_DESC(rate, "Set the rate variable on load.");
+MODULE_PARM_DESC(pitch, "Set the pitch variable on load.");
+MODULE_PARM_DESC(vol, "Set the vol variable on load.");
+MODULE_PARM_DESC(voice, "Set the voice variable on load.");
+MODULE_PARM_DESC(lang, "Set the lang variable on load.");
+MODULE_PARM_DESC(direct, "Set the direct variable on load.");
+
+
 
 module_spk_synth(synth_apollo);
 
Signature · 1 line
2.25.1
maintainer Reviewed-by on v1 1/1
#1 lore raw

Osama Muhammad, le ven. 21 oct. 2022 18:52:16 +0500, a ecrit:

Quoted 10 lines

This is an enhancement which allows to specify the default driver parameters among the module parameters.

Adding default variables to the speakup_apollo module allows to easily set that at boot, rather than setting the sys variables after boot.
More details can be found here:
https://github.com/linux-speakup/speakup/issues/7

thanks!

Quoted 75 lines
---
 .../accessibility/speakup/speakup_apollo.c    | 46 +++++++++++++++----
 1 file changed, 37 insertions(+), 9 deletions(-)
drivers/accessibility/speakup/speakup_apollo.c +37 -9
index c84a7e0864b7..d2fbb3f57221 100644
@@ -24,15 +24,28 @@
 
 static void do_catch_up(struct spk_synth *synth);
 
-static struct var_t vars[] = {
-	{ CAPS_START, .u.s = {"cap, " } },
-	{ CAPS_STOP, .u.s = {"" } },
-	{ RATE, .u.n = {"@W%d", 6, 1, 9, 0, 0, NULL } },
-	{ PITCH, .u.n = {"@F%x", 10, 0, 15, 0, 0, NULL } },
-	{ VOL, .u.n = {"@A%x", 10, 0, 15, 0, 0, NULL } },
-	{ VOICE, .u.n = {"@V%d", 1, 1, 6, 0, 0, NULL } },
-	{ LANG, .u.n = {"@=%d,", 1, 1, 4, 0, 0, NULL } },
-	{ DIRECT, .u.n = {NULL, 0, 0, 1, 0, 0, NULL } },
+
+
+enum default_vars_id {
+	CAPS_START_ID = 0, CAPS_STOP_ID,
+	RATE_ID, PITCH_ID,
+	VOL_ID, VOICE_ID, LANG_ID,
+	DIRECT_ID, V_LAST_VAR_ID,
+	NB_ID
+};
+
+
+
+
+static struct var_t vars[NB_ID] = {
+	[CAPS_START_ID] = { CAPS_START, .u.s = {"cap, " } },
+	[CAPS_STOP_ID] = { CAPS_STOP, .u.s = {"" } },
+	[RATE_ID] = { RATE, .u.n = {"@W%d", 6, 1, 9, 0, 0, NULL } },
+	[PITCH_ID] = { PITCH, .u.n = {"@F%x", 10, 0, 15, 0, 0, NULL } },
+	[VOL_ID] = { VOL, .u.n = {"@A%x", 10, 0, 15, 0, 0, NULL } },
+	[VOICE_ID] = { VOICE, .u.n = {"@V%d", 1, 1, 6, 0, 0, NULL } },
+	[LANG_ID] = { LANG, .u.n = {"@=%d,", 1, 1, 4, 0, 0, NULL } },
+	[DIRECT_ID] = { DIRECT, .u.n = {NULL, 0, 0, 1, 0, 0, NULL } },
 	V_LAST_VAR
 };
 
@@ -193,10 +206,25 @@ static void do_catch_up(struct spk_synth *synth)
 module_param_named(ser, synth_apollo.ser, int, 0444);
 module_param_named(dev, synth_apollo.dev_name, charp, 0444);
 module_param_named(start, synth_apollo.startup, short, 0444);
+module_param_named(rate, vars[RATE_ID].u.n.default_val, int, 0444);
+module_param_named(pitch, vars[PITCH_ID].u.n.default_val, int, 0444);
+module_param_named(vol, vars[VOL_ID].u.n.default_val, int, 0444);
+module_param_named(voice, vars[VOICE_ID].u.n.default_val, int, 0444);
+module_param_named(lang, vars[LANG_ID].u.n.default_val, int, 0444);
+module_param_named(direct, vars[DIRECT_ID].u.n.default_val, int, 0444);
+
 
 MODULE_PARM_DESC(ser, "Set the serial port for the synthesizer (0-based).");
 MODULE_PARM_DESC(dev, "Set the device e.g. ttyUSB0, for the synthesizer.");
 MODULE_PARM_DESC(start, "Start the synthesizer once it is loaded.");
+MODULE_PARM_DESC(rate, "Set the rate variable on load.");
+MODULE_PARM_DESC(pitch, "Set the pitch variable on load.");
+MODULE_PARM_DESC(vol, "Set the vol variable on load.");
+MODULE_PARM_DESC(voice, "Set the voice variable on load.");
+MODULE_PARM_DESC(lang, "Set the lang variable on load.");
+MODULE_PARM_DESC(direct, "Set the direct variable on load.");
+
+
 
 module_spk_synth(synth_apollo);
 
Signature · 1 line
2.25.1
Signature · 4 lines
Samuel
---
Pour une évaluation indépendante, transparente et rigoureuse !
Je soutiens la Commission d'Évaluation de l'Inria.