Skip to contentSkip to conversation

firmware: ti_sci: Fix polled mode during system suspend

PATCH RESEND Applied Georgi Vlaev 2 participants 2 messages Oct 21, 2022 – Oct 28, 2022 Texas instruments' system control interface (TISCI) protocol driver

lore
Share & tools
lore
#0 lore raw

PATCH RESEND 1/1 firmware: ti_sci: Fix polled mode during system suspend

Commit b9e8a7d950ff ("firmware: ti_sci: Switch transport to polled mode during system suspend") uses read_poll_timeout_atomic() macro in ti_sci_do_xfer() to wait for completion when the system is suspending. The break condition of the macro is set to "true" which will cause it break immediately when evaluated, likely before the TISCI xfer is completed, and always return 0. We want to poll here until "done_state == true".

1) Change the break condition of read_poll_timeout_atomic() to the bool variable "done_state".

2) The read_poll_timeout_atomic() returns 0 if the break condition is met or -ETIMEDOUT if not. Since our break condition has changed to "done_state", we also don't have to check for "!done_state" when evaluating the return value.

Fixes b9e8a7d950ff ("firmware: ti_sci: Switch transport to polled mode during system suspend")
---
 drivers/firmware/ti_sci.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)
drivers/firmware/ti_sci.c +2 -3
index ebc32bbd9b83..6281e7153b47 100644
@@ -429,15 +429,14 @@ static inline int ti_sci_do_xfer(struct ti_sci_info *info,
 		 * during noirq phase, so we must manually poll the completion.
 		 */
 		ret = read_poll_timeout_atomic(try_wait_for_completion, done_state,
-					       true, 1,
+					       done_state, 1,
 					       info->desc->max_rx_timeout_ms * 1000,
 					       false, &xfer->done);
 	}
 
-	if (ret == -ETIMEDOUT || !done_state) {
+	if (ret == -ETIMEDOUT)
 		dev_err(dev, "Mbox timedout in resp(caller: %pS)\n",
 			(void *)_RET_IP_);
-	}
 
 	/*
 	 * NOTE: we might prefer not to need the mailbox ticker to manage the

base-commit: 4d48f589d294ddc5e01d3b0dc7cecc55324c05ca

Signature · 1 line
2.30.2
maintainer Applied
#1 lore raw

Hi Georgi Vlaev,

Quoted 9 lines · Georgi Vlaev

Commit b9e8a7d950ff ("firmware: ti_sci: Switch transport to polled mode during system suspend") uses read_poll_timeout_atomic() macro in ti_sci_do_xfer() to wait for completion when the system is suspending. The break condition of the macro is set to "true" which will cause it break immediately when evaluated, likely before the TISCI xfer is completed, and always return 0. We want to poll here until "done_state == true".

[...]

I have applied the following to branch ti-drivers-soc-next on [1]. Thank you!

[1/1] firmware: ti_sci: Fix polled mode during system suspend

      commit: b13b2c3e0e4d0854228b5217fa34e145f3ace8ac

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent up the chain during the next merge window (or sooner if it is a relevant bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

[1] git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git

Signature · 3 lines
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3  1A34 DDB5 849D 1736 249D