ARM: s3c: clean out obsolete platforms
Subsystems (41)
cover ARM: s3c: clean out obsolete platforms
From: Arnd Bergmann <[email protected]>
The s3c24xx platform was marked as deprecated a while ago, and for the s3c64xx platform, we marked all except one legacy board file as unused.
This series removes all of those, leaving only s3c64xx support for DT based boots as well as the cragg6410 board file.
About half of the s3c specific drivers were only used on the now removed machines, so these drivers can be retired as well. I can either merge the driver removal patches through the soc tree along with the board file patches, or subsystem maintainers can pick them up into their own trees, whichever they prefer.
Arnd Bergmann (21):
ARM: s3c: remove all s3c24xx support
ARM: s3c: remove s3c24xx specific hacks
ARM: s3c: remove most s3c64xx board support
ARM: s3c: remove adc.c
ARM: s3c: simplify platform code
ARM: s3c: remove s3c6400 support
power: remove s3c adc battery driver
hwmon: remove s3c driver
pata: remove samsung_cf driver
mmc: remove s3cmci driver
clk: remove s3c24xx driver
leds: remove s3c24xx driver
usb: gadget: remove s3c24xx drivers
dmaengine: remove s3c24xx driver
cpufreq: remove s3c24xx drivers
fbdev: remove s3c2410 framebuffer
input: remove s3c24xx touchscreen driver
pinctrl: remove s3c24xx driver
spi: remove s3c24xx driver
soc: s3c: remove pm-debug hack
ASoC: samsung: remove unused drivers
Cc: Krzysztof Kozlowski <[email protected]>
Cc: Ben Dooks <[email protected]>
Cc: Simtec Linux Team <[email protected]>
Bcc: Alim Akhtar <[email protected]>
Bcc: Rob Herring <[email protected]>
Bcc: Damien Le Moal <[email protected]>
Bcc: Sergey Shtylyov <[email protected]>
Bcc: Sylwester Nawrocki <[email protected]>
Bcc: Tomasz Figa <[email protected]>
Bcc: Chanwoo Choi <[email protected]>
Bcc: Michael Turquette <[email protected]>
Bcc: Stephen Boyd <[email protected]>
Bcc: Daniel Lezcano <[email protected]>
Bcc: Thomas Gleixner <[email protected]>
Bcc: "Rafael J. Wysocki" <[email protected]>
Bcc: Viresh Kumar <[email protected]>
Bcc: Vinod Koul <[email protected]>
Bcc: Jean Delvare <[email protected]>
Bcc: Guenter Roeck <[email protected]>
Bcc: Jonathan Cameron <[email protected]>
Bcc: Lars-Peter Clausen <[email protected]>
Bcc: Dmitry Torokhov <[email protected]>
Bcc: Pavel Machek <[email protected]>
Bcc: Mauro Carvalho Chehab <[email protected]>
Bcc: Ulf Hansson <[email protected]>
Bcc: Miquel Raynal <[email protected]>
Bcc: Richard Weinberger <[email protected]>
Bcc: Vignesh Raghavendra <[email protected]>
Bcc: Linus Walleij <[email protected]>
Bcc: Sebastian Reichel <[email protected]>
Bcc: Alexandre Belloni <[email protected]>
Bcc: Mark Brown <[email protected]>
Bcc: Greg Kroah-Hartman <[email protected]>
Bcc: Jiri Slaby <[email protected]>
Bcc: Felipe Balbi <[email protected]>
Bcc: Helge Deller <[email protected]>
Bcc: Wim Van Sebroeck <[email protected]>
Bcc: Liam Girdwood <[email protected]>
Bcc: Thierry Reding <[email protected]>
Bcc: "Uwe Kleine-König" <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Documentation/arm/index.rst | 1 - Documentation/arm/samsung-s3c24xx/cpufreq.rst | 77 - .../arm/samsung-s3c24xx/eb2410itx.rst | 59 - Documentation/arm/samsung-s3c24xx/gpio.rst | 172 -- Documentation/arm/samsung-s3c24xx/h1940.rst | 41 - Documentation/arm/samsung-s3c24xx/index.rst | 20 - Documentation/arm/samsung-s3c24xx/nand.rst | 30 - .../arm/samsung-s3c24xx/overview.rst | 311 --- Documentation/arm/samsung-s3c24xx/s3c2412.rst | 121 - Documentation/arm/samsung-s3c24xx/s3c2413.rst | 22 - .../arm/samsung-s3c24xx/smdk2440.rst | 57 - Documentation/arm/samsung-s3c24xx/suspend.rst | 137 -- .../arm/samsung-s3c24xx/usb-host.rst | 91 - Documentation/arm/samsung/overview.rst | 13 - MAINTAINERS | 31 - arch/arm/Kconfig | 3 +- arch/arm/Kconfig.debug | 58 +- arch/arm/Makefile | 2 - arch/arm/boot/dts/Makefile | 2 - arch/arm/boot/dts/s3c2410-pinctrl.h | 19 - arch/arm/boot/dts/s3c2416-pinctrl.dtsi | 172 -- arch/arm/boot/dts/s3c2416-smdk2416.dts | 77 - arch/arm/boot/dts/s3c2416.dtsi | 124 -- arch/arm/boot/dts/s3c24xx.dtsi | 92 - arch/arm/configs/mini2440_defconfig | 338 --- arch/arm/configs/s3c2410_defconfig | 437 ---- arch/arm/configs/tct_hammer_defconfig | 58 - arch/arm/include/debug/s3c24xx.S | 10 - arch/arm/mach-s3c/Kconfig | 92 +- arch/arm/mach-s3c/Kconfig.s3c24xx | 604 ----- arch/arm/mach-s3c/Kconfig.s3c64xx | 212 -- arch/arm/mach-s3c/Makefile | 12 - arch/arm/mach-s3c/Makefile.s3c24xx | 102 - arch/arm/mach-s3c/Makefile.s3c64xx | 15 - arch/arm/mach-s3c/adc-core.h | 24 - arch/arm/mach-s3c/adc.c | 510 ----- arch/arm/mach-s3c/anubis.h | 50 - arch/arm/mach-s3c/ata-core-s3c64xx.h | 24 - arch/arm/mach-s3c/backlight-s3c64xx.h | 22 - arch/arm/mach-s3c/bast-ide.c | 82 - arch/arm/mach-s3c/bast-irq.c | 137 -- arch/arm/mach-s3c/bast.h | 194 -- arch/arm/mach-s3c/common-smdk-s3c24xx.c | 228 -- arch/arm/mach-s3c/common-smdk-s3c24xx.h | 11 - arch/arm/mach-s3c/cpu.h | 47 - arch/arm/mach-s3c/cpufreq-utils-s3c24xx.c | 94 - arch/arm/mach-s3c/dev-audio-s3c64xx.c | 127 -- arch/arm/mach-s3c/dev-backlight-s3c64xx.c | 137 -- arch/arm/mach-s3c/devs.c | 726 ------ arch/arm/mach-s3c/devs.h | 37 - arch/arm/mach-s3c/dma-s3c24xx.h | 51 - arch/arm/mach-s3c/dma-s3c64xx.h | 57 - arch/arm/mach-s3c/dma.h | 9 - arch/arm/mach-s3c/fb-core-s3c24xx.h | 24 - arch/arm/mach-s3c/gpio-cfg-helpers.h | 124 -- arch/arm/mach-s3c/gpio-cfg.h | 19 - arch/arm/mach-s3c/gpio-core.h | 3 - arch/arm/mach-s3c/gpio-samsung-s3c24xx.h | 103 - arch/arm/mach-s3c/gpio-samsung.c | 443 +--- arch/arm/mach-s3c/gpio-samsung.h | 7 - arch/arm/mach-s3c/gta02.h | 20 - arch/arm/mach-s3c/h1940-bluetooth.c | 140 -- arch/arm/mach-s3c/h1940.h | 52 - arch/arm/mach-s3c/hardware-s3c24xx.h | 14 - arch/arm/mach-s3c/iic-core.h | 7 - arch/arm/mach-s3c/init.c | 26 +- arch/arm/mach-s3c/iotiming-s3c2410.c | 472 ---- arch/arm/mach-s3c/iotiming-s3c2412.c | 278 --- arch/arm/mach-s3c/irq-pm-s3c24xx.c | 115 - arch/arm/mach-s3c/irq-s3c24xx-fiq-exports.c | 9 - arch/arm/mach-s3c/irq-s3c24xx-fiq.S | 112 - arch/arm/mach-s3c/irq-s3c24xx.c | 1352 ----------- arch/arm/mach-s3c/irqs-s3c24xx.h | 219 -- arch/arm/mach-s3c/irqs.h | 7 - arch/arm/mach-s3c/mach-amlm5900.c | 248 --- arch/arm/mach-s3c/mach-anubis.c | 422 ---- arch/arm/mach-s3c/mach-anw6410.c | 230 -- arch/arm/mach-s3c/mach-at2440evb.c | 233 -- arch/arm/mach-s3c/mach-bast.c | 583 ----- arch/arm/mach-s3c/mach-crag6410.c | 1 - arch/arm/mach-s3c/mach-gta02.c | 588 ----- arch/arm/mach-s3c/mach-h1940.c | 809 ------- arch/arm/mach-s3c/mach-hmt.c | 282 --- arch/arm/mach-s3c/mach-jive.c | 693 ------ arch/arm/mach-s3c/mach-mini2440.c | 804 ------- arch/arm/mach-s3c/mach-mini6410.c | 365 --- arch/arm/mach-s3c/mach-n30.c | 682 ------ arch/arm/mach-s3c/mach-ncp.c | 100 - arch/arm/mach-s3c/mach-nexcoder.c | 162 -- arch/arm/mach-s3c/mach-osiris-dvs.c | 178 -- arch/arm/mach-s3c/mach-osiris.c | 405 ---- arch/arm/mach-s3c/mach-otom.c | 124 -- arch/arm/mach-s3c/mach-qt2410.c | 375 ---- arch/arm/mach-s3c/mach-real6410.c | 333 --- arch/arm/mach-s3c/mach-rx1950.c | 884 -------- arch/arm/mach-s3c/mach-rx3715.c | 213 -- arch/arm/mach-s3c/mach-s3c2416-dt.c | 48 - arch/arm/mach-s3c/mach-smartq.c | 424 ---- arch/arm/mach-s3c/mach-smartq.h | 16 - arch/arm/mach-s3c/mach-smartq5.c | 154 -- arch/arm/mach-s3c/mach-smartq7.c | 170 -- arch/arm/mach-s3c/mach-smdk2410.c | 112 - arch/arm/mach-s3c/mach-smdk2413.c | 169 -- arch/arm/mach-s3c/mach-smdk2416.c | 248 --- arch/arm/mach-s3c/mach-smdk2440.c | 180 -- arch/arm/mach-s3c/mach-smdk2443.c | 126 -- arch/arm/mach-s3c/mach-smdk6400.c | 90 - arch/arm/mach-s3c/mach-smdk6410.c | 706 ------ arch/arm/mach-s3c/mach-tct_hammer.c | 157 -- arch/arm/mach-s3c/mach-vr1000.c | 364 --- arch/arm/mach-s3c/mach-vstms.c | 166 -- arch/arm/mach-s3c/map-s3c.h | 37 - arch/arm/mach-s3c/map-s3c24xx.h | 159 -- arch/arm/mach-s3c/map.h | 7 - arch/arm/mach-s3c/nand-core-s3c24xx.h | 24 - arch/arm/mach-s3c/onenand-core-s3c64xx.h | 32 - arch/arm/mach-s3c/osiris.h | 50 - arch/arm/mach-s3c/otom.h | 25 - arch/arm/mach-s3c/pll-s3c2410.c | 83 - arch/arm/mach-s3c/pll-s3c2440-12000000.c | 95 - arch/arm/mach-s3c/pll-s3c2440-16934400.c | 122 - arch/arm/mach-s3c/pm-core-s3c24xx.h | 96 - arch/arm/mach-s3c/pm-core-s3c64xx.h | 17 - arch/arm/mach-s3c/pm-core.h | 7 - arch/arm/mach-s3c/pm-h1940.S | 19 - arch/arm/mach-s3c/pm-s3c2410.c | 170 -- arch/arm/mach-s3c/pm-s3c2412.c | 126 -- arch/arm/mach-s3c/pm-s3c2416.c | 81 - arch/arm/mach-s3c/pm-s3c24xx.c | 121 - arch/arm/mach-s3c/pm-s3c64xx.c | 83 - arch/arm/mach-s3c/pm.c | 7 +- arch/arm/mach-s3c/pm.h | 12 - arch/arm/mach-s3c/regs-adc.h | 64 - arch/arm/mach-s3c/regs-clock-s3c24xx.h | 146 -- arch/arm/mach-s3c/regs-clock.h | 7 - arch/arm/mach-s3c/regs-dsc-s3c24xx.h | 22 - arch/arm/mach-s3c/regs-gpio-s3c24xx.h | 608 ----- arch/arm/mach-s3c/regs-gpio.h | 7 - arch/arm/mach-s3c/regs-irq-s3c24xx.h | 51 - arch/arm/mach-s3c/regs-irq.h | 7 - arch/arm/mach-s3c/regs-mem-s3c24xx.h | 53 - arch/arm/mach-s3c/regs-s3c2443-clock.h | 238 -- arch/arm/mach-s3c/regs-srom-s3c64xx.h | 55 - arch/arm/mach-s3c/rtc-core-s3c24xx.h | 23 - arch/arm/mach-s3c/s3c2410.c | 130 -- arch/arm/mach-s3c/s3c2412-power.h | 34 - arch/arm/mach-s3c/s3c2412.c | 175 -- arch/arm/mach-s3c/s3c2412.h | 25 - arch/arm/mach-s3c/s3c2416.c | 132 -- arch/arm/mach-s3c/s3c2440.c | 71 - arch/arm/mach-s3c/s3c2442.c | 62 - arch/arm/mach-s3c/s3c2443.c | 112 - arch/arm/mach-s3c/s3c244x.c | 128 -- arch/arm/mach-s3c/s3c24xx.c | 687 ------ arch/arm/mach-s3c/s3c24xx.h | 124 -- arch/arm/mach-s3c/s3c6400.c | 90 - arch/arm/mach-s3c/s3c6410.c | 9 - arch/arm/mach-s3c/s3c64xx.c | 8 - arch/arm/mach-s3c/sdhci.h | 25 - arch/arm/mach-s3c/setup-i2c-s3c24xx.c | 23 - arch/arm/mach-s3c/setup-ide-s3c64xx.c | 40 - arch/arm/mach-s3c/setup-sdhci-gpio-s3c24xx.c | 31 - arch/arm/mach-s3c/setup-spi-s3c24xx.c | 27 - arch/arm/mach-s3c/setup-ts-s3c24xx.c | 29 - arch/arm/mach-s3c/simtec-audio.c | 76 - arch/arm/mach-s3c/simtec-nor.c | 74 - arch/arm/mach-s3c/simtec-pm.c | 60 - arch/arm/mach-s3c/simtec-usb.c | 125 -- arch/arm/mach-s3c/simtec.h | 17 - arch/arm/mach-s3c/sleep-s3c2410.S | 54 - arch/arm/mach-s3c/sleep-s3c2412.S | 53 - arch/arm/mach-s3c/sleep-s3c24xx.S | 69 - arch/arm/mach-s3c/sleep-s3c64xx.S | 27 - arch/arm/mach-s3c/spi-core-s3c24xx.h | 21 - arch/arm/mach-s3c/vr1000.h | 113 - drivers/ata/Kconfig | 10 - drivers/ata/Makefile | 1 - drivers/ata/pata_samsung_cf.c | 662 ------ drivers/clk/samsung/Kconfig | 32 - drivers/clk/samsung/Makefile | 4 - drivers/clk/samsung/clk-s3c2410-dclk.c | 440 ---- drivers/clk/samsung/clk-s3c2410.c | 446 ---- drivers/clk/samsung/clk-s3c2412.c | 254 --- drivers/clk/samsung/clk-s3c2443.c | 438 ---- drivers/clocksource/Kconfig | 2 +- drivers/cpufreq/Kconfig.arm | 78 - drivers/cpufreq/Makefile | 6 - drivers/cpufreq/s3c2410-cpufreq.c | 155 -- drivers/cpufreq/s3c2412-cpufreq.c | 240 -- drivers/cpufreq/s3c2416-cpufreq.c | 492 ---- drivers/cpufreq/s3c2440-cpufreq.c | 321 --- drivers/cpufreq/s3c24xx-cpufreq-debugfs.c | 163 -- drivers/cpufreq/s3c24xx-cpufreq.c | 648 ------ drivers/dma/Kconfig | 12 - drivers/dma/Makefile | 1 - drivers/dma/s3c24xx-dma.c | 1428 ------------ drivers/hwmon/Kconfig | 17 - drivers/hwmon/Makefile | 1 - drivers/hwmon/s3c-hwmon.c | 379 ---- drivers/i2c/busses/Kconfig | 3 +- drivers/i2c/busses/i2c-s3c2410.c | 72 - drivers/iio/adc/Kconfig | 6 +- drivers/input/touchscreen/Kconfig | 12 - drivers/input/touchscreen/Makefile | 1 - drivers/input/touchscreen/s3c2410_ts.c | 464 ---- drivers/leds/Kconfig | 8 - drivers/leds/Makefile | 1 - drivers/leds/leds-s3c24xx.c | 83 - .../media/platform/samsung/s3c-camif/Kconfig | 8 +- drivers/mmc/host/Kconfig | 48 +- drivers/mmc/host/Makefile | 1 - drivers/mmc/host/s3cmci.c | 1777 --------------- drivers/mmc/host/s3cmci.h | 75 - drivers/mtd/nand/raw/Kconfig | 2 +- drivers/mtd/nand/raw/s3c2410.c | 60 - drivers/pinctrl/samsung/Kconfig | 5 - drivers/pinctrl/samsung/Makefile | 1 - drivers/pinctrl/samsung/pinctrl-s3c24xx.c | 653 ------ drivers/pinctrl/samsung/pinctrl-samsung.c | 10 - drivers/power/supply/Kconfig | 6 - drivers/power/supply/Makefile | 1 - drivers/power/supply/s3c_adc_battery.c | 453 ---- drivers/rtc/Kconfig | 8 +- drivers/soc/samsung/Kconfig | 26 +- drivers/soc/samsung/Makefile | 1 - drivers/soc/samsung/s3c-pm-debug.c | 79 - drivers/spi/Kconfig | 18 - drivers/spi/Makefile | 2 - drivers/spi/spi-s3c24xx-regs.h | 41 - drivers/spi/spi-s3c24xx.c | 596 ----- drivers/tty/serial/Kconfig | 8 +- drivers/tty/serial/samsung_tty.c | 199 -- drivers/usb/gadget/udc/Kconfig | 25 - drivers/usb/gadget/udc/Makefile | 2 - drivers/usb/gadget/udc/s3c-hsudc.c | 1319 ----------- drivers/usb/gadget/udc/s3c2410_udc.c | 1980 ----------------- drivers/usb/gadget/udc/s3c2410_udc.h | 99 - drivers/usb/gadget/udc/s3c2410_udc_regs.h | 146 -- drivers/usb/host/Kconfig | 8 +- drivers/video/fbdev/Kconfig | 33 +- drivers/video/fbdev/Makefile | 1 - drivers/video/fbdev/s3c2410fb-regs-lcd.h | 143 -- drivers/video/fbdev/s3c2410fb.c | 1142 ---------- drivers/video/fbdev/s3c2410fb.h | 48 - drivers/watchdog/Kconfig | 9 +- drivers/watchdog/s3c2410_wdt.c | 84 +- include/dt-bindings/clock/s3c2410.h | 59 - include/dt-bindings/clock/s3c2412.h | 70 - include/dt-bindings/clock/s3c2443.h | 91 - include/linux/amba/pl093.h | 77 - include/linux/clk/samsung.h | 32 - .../linux/platform_data/asoc-s3c24xx_simtec.h | 30 - include/linux/platform_data/ata-samsung_cf.h | 31 - include/linux/platform_data/clk-s3c2410.h | 19 - include/linux/platform_data/dma-s3c24xx.h | 48 - include/linux/platform_data/fb-s3c2410.h | 99 - include/linux/platform_data/leds-s3c24xx.h | 18 - include/linux/platform_data/media/s5p_hdmi.h | 32 - include/linux/platform_data/mmc-s3cmci.h | 51 - include/linux/platform_data/s3c-hsudc.h | 33 - include/linux/platform_data/usb-s3c2410_udc.h | 33 - include/linux/s3c_adc_battery.h | 39 - include/linux/soc/samsung/s3c-adc.h | 32 - include/linux/soc/samsung/s3c-cpufreq-core.h | 299 --- include/linux/soc/samsung/s3c-pm.h | 58 - include/linux/spi/s3c24xx-fiq.h | 33 - include/linux/spi/s3c24xx.h | 20 - include/sound/s3c24xx_uda134x.h | 14 - sound/soc/samsung/Kconfig | 93 - sound/soc/samsung/Makefile | 26 - sound/soc/samsung/h1940_uda1380.c | 224 -- sound/soc/samsung/jive_wm8750.c | 143 -- sound/soc/samsung/neo1973_wm8753.c | 360 --- sound/soc/samsung/regs-i2s-v2.h | 111 - sound/soc/samsung/regs-iis.h | 66 - sound/soc/samsung/rx1950_uda1380.c | 245 -- sound/soc/samsung/s3c-i2s-v2.c | 670 ------ sound/soc/samsung/s3c-i2s-v2.h | 108 - sound/soc/samsung/s3c2412-i2s.c | 251 --- sound/soc/samsung/s3c2412-i2s.h | 22 - sound/soc/samsung/s3c24xx-i2s.c | 463 ---- sound/soc/samsung/s3c24xx-i2s.h | 31 - sound/soc/samsung/s3c24xx_simtec.c | 372 ---- sound/soc/samsung/s3c24xx_simtec.h | 18 - sound/soc/samsung/s3c24xx_simtec_hermes.c | 112 - .../soc/samsung/s3c24xx_simtec_tlv320aic23.c | 100 - sound/soc/samsung/s3c24xx_uda134x.c | 257 --- sound/soc/samsung/smartq_wm8987.c | 224 -- sound/soc/samsung/smdk_wm8580.c | 211 -- 289 files changed, 48 insertions(+), 48148 deletions(-) delete mode 100644 Documentation/arm/samsung-s3c24xx/cpufreq.rst delete mode 100644 Documentation/arm/samsung-s3c24xx/eb2410itx.rst delete mode 100644 Documentation/arm/samsung-s3c24xx/gpio.rst delete mode 100644 Documentation/arm/samsung-s3c24xx/h1940.rst delete mode 100644 Documentation/arm/samsung-s3c24xx/index.rst delete mode 100644 Documentation/arm/samsung-s3c24xx/nand.rst delete mode 100644 Documentation/arm/samsung-s3c24xx/overview.rst delete mode 100644 Documentation/arm/samsung-s3c24xx/s3c2412.rst delete mode 100644 Documentation/arm/samsung-s3c24xx/s3c2413.rst delete mode 100644 Documentation/arm/samsung-s3c24xx/smdk2440.rst delete mode 100644 Documentation/arm/samsung-s3c24xx/suspend.rst delete mode 100644 Documentation/arm/samsung-s3c24xx/usb-host.rst delete mode 100644 arch/arm/boot/dts/s3c2410-pinctrl.h delete mode 100644 arch/arm/boot/dts/s3c2416-pinctrl.dtsi delete mode 100644 arch/arm/boot/dts/s3c2416-smdk2416.dts delete mode 100644 arch/arm/boot/dts/s3c2416.dtsi delete mode 100644 arch/arm/boot/dts/s3c24xx.dtsi delete mode 100644 arch/arm/configs/mini2440_defconfig delete mode 100644 arch/arm/configs/s3c2410_defconfig delete mode 100644 arch/arm/configs/tct_hammer_defconfig delete mode 100644 arch/arm/mach-s3c/Kconfig.s3c24xx delete mode 100644 arch/arm/mach-s3c/Makefile.s3c24xx delete mode 100644 arch/arm/mach-s3c/adc-core.h delete mode 100644 arch/arm/mach-s3c/adc.c delete mode 100644 arch/arm/mach-s3c/anubis.h delete mode 100644 arch/arm/mach-s3c/ata-core-s3c64xx.h delete mode 100644 arch/arm/mach-s3c/backlight-s3c64xx.h delete mode 100644 arch/arm/mach-s3c/bast-ide.c delete mode 100644 arch/arm/mach-s3c/bast-irq.c delete mode 100644 arch/arm/mach-s3c/bast.h delete mode 100644 arch/arm/mach-s3c/common-smdk-s3c24xx.c delete mode 100644 arch/arm/mach-s3c/common-smdk-s3c24xx.h delete mode 100644 arch/arm/mach-s3c/cpufreq-utils-s3c24xx.c delete mode 100644 arch/arm/mach-s3c/dev-backlight-s3c64xx.c delete mode 100644 arch/arm/mach-s3c/dma-s3c24xx.h delete mode 100644 arch/arm/mach-s3c/dma-s3c64xx.h delete mode 100644 arch/arm/mach-s3c/dma.h delete mode 100644 arch/arm/mach-s3c/fb-core-s3c24xx.h delete mode 100644 arch/arm/mach-s3c/gpio-samsung-s3c24xx.h delete mode 100644 arch/arm/mach-s3c/gta02.h delete mode 100644 arch/arm/mach-s3c/h1940-bluetooth.c delete mode 100644 arch/arm/mach-s3c/h1940.h delete mode 100644 arch/arm/mach-s3c/hardware-s3c24xx.h delete mode 100644 arch/arm/mach-s3c/iotiming-s3c2410.c delete mode 100644 arch/arm/mach-s3c/iotiming-s3c2412.c delete mode 100644 arch/arm/mach-s3c/irq-pm-s3c24xx.c delete mode 100644 arch/arm/mach-s3c/irq-s3c24xx-fiq-exports.c delete mode 100644 arch/arm/mach-s3c/irq-s3c24xx-fiq.S delete mode 100644 arch/arm/mach-s3c/irq-s3c24xx.c delete mode 100644 arch/arm/mach-s3c/irqs-s3c24xx.h delete mode 100644 arch/arm/mach-s3c/mach-amlm5900.c delete mode 100644 arch/arm/mach-s3c/mach-anubis.c delete mode 100644 arch/arm/mach-s3c/mach-anw6410.c delete mode 100644 arch/arm/mach-s3c/mach-at2440evb.c delete mode 100644 arch/arm/mach-s3c/mach-bast.c delete mode 100644 arch/arm/mach-s3c/mach-gta02.c delete mode 100644 arch/arm/mach-s3c/mach-h1940.c delete mode 100644 arch/arm/mach-s3c/mach-hmt.c delete mode 100644 arch/arm/mach-s3c/mach-jive.c delete mode 100644 arch/arm/mach-s3c/mach-mini2440.c delete mode 100644 arch/arm/mach-s3c/mach-mini6410.c delete mode 100644 arch/arm/mach-s3c/mach-n30.c delete mode 100644 arch/arm/mach-s3c/mach-ncp.c delete mode 100644 arch/arm/mach-s3c/mach-nexcoder.c delete mode 100644 arch/arm/mach-s3c/mach-osiris-dvs.c delete mode 100644 arch/arm/mach-s3c/mach-osiris.c delete mode 100644 arch/arm/mach-s3c/mach-otom.c delete mode 100644 arch/arm/mach-s3c/mach-qt2410.c delete mode 100644 arch/arm/mach-s3c/mach-real6410.c delete mode 100644 arch/arm/mach-s3c/mach-rx1950.c delete mode 100644 arch/arm/mach-s3c/mach-rx3715.c delete mode 100644 arch/arm/mach-s3c/mach-s3c2416-dt.c delete mode 100644 arch/arm/mach-s3c/mach-smartq.c delete mode 100644 arch/arm/mach-s3c/mach-smartq.h delete mode 100644 arch/arm/mach-s3c/mach-smartq5.c delete mode 100644 arch/arm/mach-s3c/mach-smartq7.c delete mode 100644 arch/arm/mach-s3c/mach-smdk2410.c delete mode 100644 arch/arm/mach-s3c/mach-smdk2413.c delete mode 100644 arch/arm/mach-s3c/mach-smdk2416.c delete mode 100644 arch/arm/mach-s3c/mach-smdk2440.c delete mode 100644 arch/arm/mach-s3c/mach-smdk2443.c delete mode 100644 arch/arm/mach-s3c/mach-smdk6400.c delete mode 100644 arch/arm/mach-s3c/mach-smdk6410.c delete mode 100644 arch/arm/mach-s3c/mach-tct_hammer.c delete mode 100644 arch/arm/mach-s3c/mach-vr1000.c delete mode 100644 arch/arm/mach-s3c/mach-vstms.c delete mode 100644 arch/arm/mach-s3c/map-s3c24xx.h delete mode 100644 arch/arm/mach-s3c/nand-core-s3c24xx.h delete mode 100644 arch/arm/mach-s3c/onenand-core-s3c64xx.h delete mode 100644 arch/arm/mach-s3c/osiris.h delete mode 100644 arch/arm/mach-s3c/otom.h delete mode 100644 arch/arm/mach-s3c/pll-s3c2410.c delete mode 100644 arch/arm/mach-s3c/pll-s3c2440-12000000.c delete mode 100644 arch/arm/mach-s3c/pll-s3c2440-16934400.c delete mode 100644 arch/arm/mach-s3c/pm-core-s3c24xx.h delete mode 100644 arch/arm/mach-s3c/pm-h1940.S delete mode 100644 arch/arm/mach-s3c/pm-s3c2410.c delete mode 100644 arch/arm/mach-s3c/pm-s3c2412.c delete mode 100644 arch/arm/mach-s3c/pm-s3c2416.c delete mode 100644 arch/arm/mach-s3c/pm-s3c24xx.c delete mode 100644 arch/arm/mach-s3c/regs-adc.h delete mode 100644 arch/arm/mach-s3c/regs-clock-s3c24xx.h delete mode 100644 arch/arm/mach-s3c/regs-dsc-s3c24xx.h delete mode 100644 arch/arm/mach-s3c/regs-gpio-s3c24xx.h delete mode 100644 arch/arm/mach-s3c/regs-irq-s3c24xx.h delete mode 100644 arch/arm/mach-s3c/regs-mem-s3c24xx.h delete mode 100644 arch/arm/mach-s3c/regs-s3c2443-clock.h delete mode 100644 arch/arm/mach-s3c/regs-srom-s3c64xx.h delete mode 100644 arch/arm/mach-s3c/rtc-core-s3c24xx.h delete mode 100644 arch/arm/mach-s3c/s3c2410.c delete mode 100644 arch/arm/mach-s3c/s3c2412-power.h delete mode 100644 arch/arm/mach-s3c/s3c2412.c delete mode 100644 arch/arm/mach-s3c/s3c2412.h delete mode 100644 arch/arm/mach-s3c/s3c2416.c delete mode 100644 arch/arm/mach-s3c/s3c2440.c delete mode 100644 arch/arm/mach-s3c/s3c2442.c delete mode 100644 arch/arm/mach-s3c/s3c2443.c delete mode 100644 arch/arm/mach-s3c/s3c244x.c delete mode 100644 arch/arm/mach-s3c/s3c24xx.c delete mode 100644 arch/arm/mach-s3c/s3c24xx.h delete mode 100644 arch/arm/mach-s3c/s3c6400.c delete mode 100644 arch/arm/mach-s3c/setup-i2c-s3c24xx.c delete mode 100644 arch/arm/mach-s3c/setup-ide-s3c64xx.c delete mode 100644 arch/arm/mach-s3c/setup-sdhci-gpio-s3c24xx.c delete mode 100644 arch/arm/mach-s3c/setup-spi-s3c24xx.c delete mode 100644 arch/arm/mach-s3c/setup-ts-s3c24xx.c delete mode 100644 arch/arm/mach-s3c/simtec-audio.c delete mode 100644 arch/arm/mach-s3c/simtec-nor.c delete mode 100644 arch/arm/mach-s3c/simtec-pm.c delete mode 100644 arch/arm/mach-s3c/simtec-usb.c delete mode 100644 arch/arm/mach-s3c/simtec.h delete mode 100644 arch/arm/mach-s3c/sleep-s3c2410.S delete mode 100644 arch/arm/mach-s3c/sleep-s3c2412.S delete mode 100644 arch/arm/mach-s3c/sleep-s3c24xx.S delete mode 100644 arch/arm/mach-s3c/spi-core-s3c24xx.h delete mode 100644 arch/arm/mach-s3c/vr1000.h delete mode 100644 drivers/ata/pata_samsung_cf.c delete mode 100644 drivers/clk/samsung/clk-s3c2410-dclk.c delete mode 100644 drivers/clk/samsung/clk-s3c2410.c delete mode 100644 drivers/clk/samsung/clk-s3c2412.c delete mode 100644 drivers/clk/samsung/clk-s3c2443.c delete mode 100644 drivers/cpufreq/s3c2410-cpufreq.c delete mode 100644 drivers/cpufreq/s3c2412-cpufreq.c delete mode 100644 drivers/cpufreq/s3c2416-cpufreq.c delete mode 100644 drivers/cpufreq/s3c2440-cpufreq.c delete mode 100644 drivers/cpufreq/s3c24xx-cpufreq-debugfs.c delete mode 100644 drivers/cpufreq/s3c24xx-cpufreq.c delete mode 100644 drivers/dma/s3c24xx-dma.c delete mode 100644 drivers/hwmon/s3c-hwmon.c delete mode 100644 drivers/input/touchscreen/s3c2410_ts.c delete mode 100644 drivers/leds/leds-s3c24xx.c delete mode 100644 drivers/mmc/host/s3cmci.c delete mode 100644 drivers/mmc/host/s3cmci.h delete mode 100644 drivers/pinctrl/samsung/pinctrl-s3c24xx.c delete mode 100644 drivers/power/supply/s3c_adc_battery.c delete mode 100644 drivers/soc/samsung/s3c-pm-debug.c delete mode 100644 drivers/spi/spi-s3c24xx-regs.h delete mode 100644 drivers/spi/spi-s3c24xx.c delete mode 100644 drivers/usb/gadget/udc/s3c-hsudc.c delete mode 100644 drivers/usb/gadget/udc/s3c2410_udc.c delete mode 100644 drivers/usb/gadget/udc/s3c2410_udc.h delete mode 100644 drivers/usb/gadget/udc/s3c2410_udc_regs.h delete mode 100644 drivers/video/fbdev/s3c2410fb-regs-lcd.h delete mode 100644 drivers/video/fbdev/s3c2410fb.c delete mode 100644 drivers/video/fbdev/s3c2410fb.h delete mode 100644 include/dt-bindings/clock/s3c2410.h delete mode 100644 include/dt-bindings/clock/s3c2412.h delete mode 100644 include/dt-bindings/clock/s3c2443.h delete mode 100644 include/linux/amba/pl093.h delete mode 100644 include/linux/platform_data/asoc-s3c24xx_simtec.h delete mode 100644 include/linux/platform_data/ata-samsung_cf.h delete mode 100644 include/linux/platform_data/clk-s3c2410.h delete mode 100644 include/linux/platform_data/dma-s3c24xx.h delete mode 100644 include/linux/platform_data/fb-s3c2410.h delete mode 100644 include/linux/platform_data/leds-s3c24xx.h delete mode 100644 include/linux/platform_data/media/s5p_hdmi.h delete mode 100644 include/linux/platform_data/mmc-s3cmci.h delete mode 100644 include/linux/platform_data/s3c-hsudc.h delete mode 100644 include/linux/platform_data/usb-s3c2410_udc.h delete mode 100644 include/linux/s3c_adc_battery.h delete mode 100644 include/linux/soc/samsung/s3c-adc.h delete mode 100644 include/linux/soc/samsung/s3c-cpufreq-core.h delete mode 100644 include/linux/spi/s3c24xx-fiq.h delete mode 100644 include/linux/spi/s3c24xx.h delete mode 100644 include/sound/s3c24xx_uda134x.h delete mode 100644 sound/soc/samsung/h1940_uda1380.c delete mode 100644 sound/soc/samsung/jive_wm8750.c delete mode 100644 sound/soc/samsung/neo1973_wm8753.c delete mode 100644 sound/soc/samsung/regs-i2s-v2.h delete mode 100644 sound/soc/samsung/regs-iis.h delete mode 100644 sound/soc/samsung/rx1950_uda1380.c delete mode 100644 sound/soc/samsung/s3c-i2s-v2.c delete mode 100644 sound/soc/samsung/s3c-i2s-v2.h delete mode 100644 sound/soc/samsung/s3c2412-i2s.c delete mode 100644 sound/soc/samsung/s3c2412-i2s.h delete mode 100644 sound/soc/samsung/s3c24xx-i2s.c delete mode 100644 sound/soc/samsung/s3c24xx-i2s.h delete mode 100644 sound/soc/samsung/s3c24xx_simtec.c delete mode 100644 sound/soc/samsung/s3c24xx_simtec.h delete mode 100644 sound/soc/samsung/s3c24xx_simtec_hermes.c delete mode 100644 sound/soc/samsung/s3c24xx_simtec_tlv320aic23.c delete mode 100644 sound/soc/samsung/s3c24xx_uda134x.c delete mode 100644 sound/soc/samsung/smartq_wm8987.c delete mode 100644 sound/soc/samsung/smdk_wm8580.c
Signature · 1 line
2.29.2
PATCH 1/21 ARM: s3c: remove all s3c24xx support
From: Arnd Bergmann <[email protected]>
The platform was deprecated in commit 6a5e69c7ddea ("ARM: s3c: mark as deprecated and schedule removal") and can be removed. This includes all files that are exclusively for s3c24xx and not shared with s3c64xx, as well as the glue logic in Kconfig and the maintainer file entries.
--- Documentation/arm/index.rst | 1 - Documentation/arm/samsung-s3c24xx/cpufreq.rst | 77 - .../arm/samsung-s3c24xx/eb2410itx.rst | 59 - Documentation/arm/samsung-s3c24xx/gpio.rst | 172 --- Documentation/arm/samsung-s3c24xx/h1940.rst | 41 - Documentation/arm/samsung-s3c24xx/index.rst | 20 - Documentation/arm/samsung-s3c24xx/nand.rst | 30 - .../arm/samsung-s3c24xx/overview.rst | 311 ---- Documentation/arm/samsung-s3c24xx/s3c2412.rst | 121 -- Documentation/arm/samsung-s3c24xx/s3c2413.rst | 22 - .../arm/samsung-s3c24xx/smdk2440.rst | 57 - Documentation/arm/samsung-s3c24xx/suspend.rst | 137 -- .../arm/samsung-s3c24xx/usb-host.rst | 91 -- Documentation/arm/samsung/overview.rst | 13 - MAINTAINERS | 16 - arch/arm/Kconfig | 3 +- arch/arm/Kconfig.debug | 58 +- arch/arm/Makefile | 2 - arch/arm/boot/dts/Makefile | 2 - arch/arm/boot/dts/s3c2410-pinctrl.h | 19 - arch/arm/boot/dts/s3c2416-pinctrl.dtsi | 172 --- arch/arm/boot/dts/s3c2416-smdk2416.dts | 77 - arch/arm/boot/dts/s3c2416.dtsi | 124 -- arch/arm/boot/dts/s3c24xx.dtsi | 92 -- arch/arm/configs/mini2440_defconfig | 338 ----- arch/arm/configs/s3c2410_defconfig | 437 ------ arch/arm/configs/tct_hammer_defconfig | 58 - arch/arm/mach-s3c/Kconfig | 27 +- arch/arm/mach-s3c/Kconfig.s3c24xx | 604 -------- arch/arm/mach-s3c/Makefile | 4 - arch/arm/mach-s3c/Makefile.s3c24xx | 102 -- arch/arm/mach-s3c/anubis.h | 50 - arch/arm/mach-s3c/bast-ide.c | 82 - arch/arm/mach-s3c/bast-irq.c | 137 -- arch/arm/mach-s3c/bast.h | 194 --- arch/arm/mach-s3c/common-smdk-s3c24xx.c | 228 --- arch/arm/mach-s3c/common-smdk-s3c24xx.h | 11 - arch/arm/mach-s3c/cpufreq-utils-s3c24xx.c | 94 -- arch/arm/mach-s3c/dma-s3c24xx.h | 51 - arch/arm/mach-s3c/fb-core-s3c24xx.h | 24 - arch/arm/mach-s3c/gpio-samsung-s3c24xx.h | 103 -- arch/arm/mach-s3c/gta02.h | 20 - arch/arm/mach-s3c/h1940-bluetooth.c | 140 -- arch/arm/mach-s3c/h1940.h | 52 - arch/arm/mach-s3c/hardware-s3c24xx.h | 14 - arch/arm/mach-s3c/iotiming-s3c2410.c | 472 ------ arch/arm/mach-s3c/iotiming-s3c2412.c | 278 ---- arch/arm/mach-s3c/irq-pm-s3c24xx.c | 115 -- arch/arm/mach-s3c/irq-s3c24xx-fiq-exports.c | 9 - arch/arm/mach-s3c/irq-s3c24xx-fiq.S | 112 -- arch/arm/mach-s3c/irq-s3c24xx.c | 1352 ----------------- arch/arm/mach-s3c/irqs-s3c24xx.h | 219 --- arch/arm/mach-s3c/mach-amlm5900.c | 248 --- arch/arm/mach-s3c/mach-anubis.c | 422 ----- arch/arm/mach-s3c/mach-at2440evb.c | 233 --- arch/arm/mach-s3c/mach-bast.c | 583 ------- arch/arm/mach-s3c/mach-gta02.c | 588 ------- arch/arm/mach-s3c/mach-h1940.c | 809 ---------- arch/arm/mach-s3c/mach-jive.c | 693 --------- arch/arm/mach-s3c/mach-mini2440.c | 804 ---------- arch/arm/mach-s3c/mach-n30.c | 682 --------- arch/arm/mach-s3c/mach-nexcoder.c | 162 -- arch/arm/mach-s3c/mach-osiris-dvs.c | 178 --- arch/arm/mach-s3c/mach-osiris.c | 405 ----- arch/arm/mach-s3c/mach-otom.c | 124 -- arch/arm/mach-s3c/mach-qt2410.c | 375 ----- arch/arm/mach-s3c/mach-rx1950.c | 884 ----------- arch/arm/mach-s3c/mach-rx3715.c | 213 --- arch/arm/mach-s3c/mach-s3c2416-dt.c | 48 - arch/arm/mach-s3c/mach-smdk2410.c | 112 -- arch/arm/mach-s3c/mach-smdk2413.c | 169 --- arch/arm/mach-s3c/mach-smdk2416.c | 248 --- arch/arm/mach-s3c/mach-smdk2440.c | 180 --- arch/arm/mach-s3c/mach-smdk2443.c | 126 -- arch/arm/mach-s3c/mach-tct_hammer.c | 157 -- arch/arm/mach-s3c/mach-vr1000.c | 364 ----- arch/arm/mach-s3c/mach-vstms.c | 166 -- arch/arm/mach-s3c/map-s3c24xx.h | 159 -- arch/arm/mach-s3c/nand-core-s3c24xx.h | 24 - arch/arm/mach-s3c/osiris.h | 50 - arch/arm/mach-s3c/pll-s3c2410.c | 83 - arch/arm/mach-s3c/pll-s3c2440-12000000.c | 95 -- arch/arm/mach-s3c/pll-s3c2440-16934400.c | 122 -- arch/arm/mach-s3c/pm-core-s3c24xx.h | 96 -- arch/arm/mach-s3c/pm-h1940.S | 19 - arch/arm/mach-s3c/pm-s3c2410.c | 170 --- arch/arm/mach-s3c/pm-s3c2412.c | 126 -- arch/arm/mach-s3c/pm-s3c2416.c | 81 - arch/arm/mach-s3c/pm-s3c24xx.c | 121 -- arch/arm/mach-s3c/regs-clock-s3c24xx.h | 146 -- arch/arm/mach-s3c/regs-dsc-s3c24xx.h | 22 - arch/arm/mach-s3c/regs-gpio-s3c24xx.h | 608 -------- arch/arm/mach-s3c/regs-irq-s3c24xx.h | 51 - arch/arm/mach-s3c/regs-mem-s3c24xx.h | 53 - arch/arm/mach-s3c/regs-s3c2443-clock.h | 238 --- arch/arm/mach-s3c/rtc-core-s3c24xx.h | 23 - arch/arm/mach-s3c/s3c2410.c | 130 -- arch/arm/mach-s3c/s3c2412-power.h | 34 - arch/arm/mach-s3c/s3c2412.c | 175 --- arch/arm/mach-s3c/s3c2412.h | 25 - arch/arm/mach-s3c/s3c2416.c | 132 -- arch/arm/mach-s3c/s3c2440.c | 71 - arch/arm/mach-s3c/s3c2442.c | 62 - arch/arm/mach-s3c/s3c2443.c | 112 -- arch/arm/mach-s3c/s3c244x.c | 128 -- arch/arm/mach-s3c/s3c24xx.c | 687 --------- arch/arm/mach-s3c/s3c24xx.h | 124 -- arch/arm/mach-s3c/setup-i2c-s3c24xx.c | 23 - arch/arm/mach-s3c/setup-sdhci-gpio-s3c24xx.c | 31 - arch/arm/mach-s3c/setup-spi-s3c24xx.c | 27 - arch/arm/mach-s3c/setup-ts-s3c24xx.c | 29 - arch/arm/mach-s3c/simtec-audio.c | 76 - arch/arm/mach-s3c/simtec-nor.c | 74 - arch/arm/mach-s3c/simtec-pm.c | 60 - arch/arm/mach-s3c/simtec-usb.c | 125 -- arch/arm/mach-s3c/simtec.h | 17 - arch/arm/mach-s3c/sleep-s3c2410.S | 54 - arch/arm/mach-s3c/sleep-s3c2412.S | 53 - arch/arm/mach-s3c/sleep-s3c24xx.S | 69 - arch/arm/mach-s3c/spi-core-s3c24xx.h | 21 - arch/arm/mach-s3c/vr1000.h | 113 -- drivers/soc/samsung/Kconfig | 4 - include/dt-bindings/clock/s3c2410.h | 59 - include/dt-bindings/clock/s3c2412.h | 70 - include/dt-bindings/clock/s3c2443.h | 91 -- include/linux/amba/pl093.h | 77 - 126 files changed, 8 insertions(+), 21049 deletions(-) delete mode 100644 Documentation/arm/samsung-s3c24xx/cpufreq.rst delete mode 100644 Documentation/arm/samsung-s3c24xx/eb2410itx.rst delete mode 100644 Documentation/arm/samsung-s3c24xx/gpio.rst delete mode 100644 Documentation/arm/samsung-s3c24xx/h1940.rst delete mode 100644 Documentation/arm/samsung-s3c24xx/index.rst delete mode 100644 Documentation/arm/samsung-s3c24xx/nand.rst delete mode 100644 Documentation/arm/samsung-s3c24xx/overview.rst delete mode 100644 Documentation/arm/samsung-s3c24xx/s3c2412.rst delete mode 100644 Documentation/arm/samsung-s3c24xx/s3c2413.rst delete mode 100644 Documentation/arm/samsung-s3c24xx/smdk2440.rst delete mode 100644 Documentation/arm/samsung-s3c24xx/suspend.rst delete mode 100644 Documentation/arm/samsung-s3c24xx/usb-host.rst delete mode 100644 arch/arm/boot/dts/s3c2410-pinctrl.h delete mode 100644 arch/arm/boot/dts/s3c2416-pinctrl.dtsi delete mode 100644 arch/arm/boot/dts/s3c2416-smdk2416.dts delete mode 100644 arch/arm/boot/dts/s3c2416.dtsi delete mode 100644 arch/arm/boot/dts/s3c24xx.dtsi delete mode 100644 arch/arm/configs/mini2440_defconfig delete mode 100644 arch/arm/configs/s3c2410_defconfig delete mode 100644 arch/arm/configs/tct_hammer_defconfig delete mode 100644 arch/arm/mach-s3c/Kconfig.s3c24xx delete mode 100644 arch/arm/mach-s3c/Makefile.s3c24xx delete mode 100644 arch/arm/mach-s3c/anubis.h delete mode 100644 arch/arm/mach-s3c/bast-ide.c delete mode 100644 arch/arm/mach-s3c/bast-irq.c delete mode 100644 arch/arm/mach-s3c/bast.h delete mode 100644 arch/arm/mach-s3c/common-smdk-s3c24xx.c delete mode 100644 arch/arm/mach-s3c/common-smdk-s3c24xx.h delete mode 100644 arch/arm/mach-s3c/cpufreq-utils-s3c24xx.c delete mode 100644 arch/arm/mach-s3c/dma-s3c24xx.h delete mode 100644 arch/arm/mach-s3c/fb-core-s3c24xx.h delete mode 100644 arch/arm/mach-s3c/gpio-samsung-s3c24xx.h delete mode 100644 arch/arm/mach-s3c/gta02.h delete mode 100644 arch/arm/mach-s3c/h1940-bluetooth.c delete mode 100644 arch/arm/mach-s3c/h1940.h delete mode 100644 arch/arm/mach-s3c/hardware-s3c24xx.h delete mode 100644 arch/arm/mach-s3c/iotiming-s3c2410.c delete mode 100644 arch/arm/mach-s3c/iotiming-s3c2412.c delete mode 100644 arch/arm/mach-s3c/irq-pm-s3c24xx.c delete mode 100644 arch/arm/mach-s3c/irq-s3c24xx-fiq-exports.c delete mode 100644 arch/arm/mach-s3c/irq-s3c24xx-fiq.S delete mode 100644 arch/arm/mach-s3c/irq-s3c24xx.c delete mode 100644 arch/arm/mach-s3c/irqs-s3c24xx.h delete mode 100644 arch/arm/mach-s3c/mach-amlm5900.c delete mode 100644 arch/arm/mach-s3c/mach-anubis.c delete mode 100644 arch/arm/mach-s3c/mach-at2440evb.c delete mode 100644 arch/arm/mach-s3c/mach-bast.c delete mode 100644 arch/arm/mach-s3c/mach-gta02.c delete mode 100644 arch/arm/mach-s3c/mach-h1940.c delete mode 100644 arch/arm/mach-s3c/mach-jive.c delete mode 100644 arch/arm/mach-s3c/mach-mini2440.c delete mode 100644 arch/arm/mach-s3c/mach-n30.c delete mode 100644 arch/arm/mach-s3c/mach-nexcoder.c delete mode 100644 arch/arm/mach-s3c/mach-osiris-dvs.c delete mode 100644 arch/arm/mach-s3c/mach-osiris.c delete mode 100644 arch/arm/mach-s3c/mach-otom.c delete mode 100644 arch/arm/mach-s3c/mach-qt2410.c delete mode 100644 arch/arm/mach-s3c/mach-rx1950.c delete mode 100644 arch/arm/mach-s3c/mach-rx3715.c delete mode 100644 arch/arm/mach-s3c/mach-s3c2416-dt.c delete mode 100644 arch/arm/mach-s3c/mach-smdk2410.c delete mode 100644 arch/arm/mach-s3c/mach-smdk2413.c delete mode 100644 arch/arm/mach-s3c/mach-smdk2416.c delete mode 100644 arch/arm/mach-s3c/mach-smdk2440.c delete mode 100644 arch/arm/mach-s3c/mach-smdk2443.c delete mode 100644 arch/arm/mach-s3c/mach-tct_hammer.c delete mode 100644 arch/arm/mach-s3c/mach-vr1000.c delete mode 100644 arch/arm/mach-s3c/mach-vstms.c delete mode 100644 arch/arm/mach-s3c/map-s3c24xx.h delete mode 100644 arch/arm/mach-s3c/nand-core-s3c24xx.h delete mode 100644 arch/arm/mach-s3c/osiris.h delete mode 100644 arch/arm/mach-s3c/pll-s3c2410.c delete mode 100644 arch/arm/mach-s3c/pll-s3c2440-12000000.c delete mode 100644 arch/arm/mach-s3c/pll-s3c2440-16934400.c delete mode 100644 arch/arm/mach-s3c/pm-core-s3c24xx.h delete mode 100644 arch/arm/mach-s3c/pm-h1940.S delete mode 100644 arch/arm/mach-s3c/pm-s3c2410.c delete mode 100644 arch/arm/mach-s3c/pm-s3c2412.c delete mode 100644 arch/arm/mach-s3c/pm-s3c2416.c delete mode 100644 arch/arm/mach-s3c/pm-s3c24xx.c delete mode 100644 arch/arm/mach-s3c/regs-clock-s3c24xx.h delete mode 100644 arch/arm/mach-s3c/regs-dsc-s3c24xx.h delete mode 100644 arch/arm/mach-s3c/regs-gpio-s3c24xx.h delete mode 100644 arch/arm/mach-s3c/regs-irq-s3c24xx.h delete mode 100644 arch/arm/mach-s3c/regs-mem-s3c24xx.h delete mode 100644 arch/arm/mach-s3c/regs-s3c2443-clock.h delete mode 100644 arch/arm/mach-s3c/rtc-core-s3c24xx.h delete mode 100644 arch/arm/mach-s3c/s3c2410.c delete mode 100644 arch/arm/mach-s3c/s3c2412-power.h delete mode 100644 arch/arm/mach-s3c/s3c2412.c delete mode 100644 arch/arm/mach-s3c/s3c2412.h delete mode 100644 arch/arm/mach-s3c/s3c2416.c delete mode 100644 arch/arm/mach-s3c/s3c2440.c delete mode 100644 arch/arm/mach-s3c/s3c2442.c delete mode 100644 arch/arm/mach-s3c/s3c2443.c delete mode 100644 arch/arm/mach-s3c/s3c244x.c delete mode 100644 arch/arm/mach-s3c/s3c24xx.c delete mode 100644 arch/arm/mach-s3c/s3c24xx.h delete mode 100644 arch/arm/mach-s3c/setup-i2c-s3c24xx.c delete mode 100644 arch/arm/mach-s3c/setup-sdhci-gpio-s3c24xx.c delete mode 100644 arch/arm/mach-s3c/setup-spi-s3c24xx.c delete mode 100644 arch/arm/mach-s3c/setup-ts-s3c24xx.c delete mode 100644 arch/arm/mach-s3c/simtec-audio.c delete mode 100644 arch/arm/mach-s3c/simtec-nor.c delete mode 100644 arch/arm/mach-s3c/simtec-pm.c delete mode 100644 arch/arm/mach-s3c/simtec-usb.c delete mode 100644 arch/arm/mach-s3c/simtec.h delete mode 100644 arch/arm/mach-s3c/sleep-s3c2410.S delete mode 100644 arch/arm/mach-s3c/sleep-s3c2412.S delete mode 100644 arch/arm/mach-s3c/sleep-s3c24xx.S delete mode 100644 arch/arm/mach-s3c/spi-core-s3c24xx.h delete mode 100644 arch/arm/mach-s3c/vr1000.h delete mode 100644 include/dt-bindings/clock/s3c2410.h delete mode 100644 include/dt-bindings/clock/s3c2412.h delete mode 100644 include/dt-bindings/clock/s3c2443.h delete mode 100644 include/linux/amba/pl093.h
Documentation/arm/index.rst +0 -1
@@ -64,7 +64,6 @@ SoC-specific documents sunxi samsung/index - samsung-s3c24xx/index sunxi/clocks
Documentation/arm/samsung-s3c24xx/cpufreq.rst deleted +0 -0
Documentation/arm/samsung-s3c24xx/eb2410itx.rst deleted +0 -0
Documentation/arm/samsung-s3c24xx/gpio.rst deleted +0 -0
Documentation/arm/samsung-s3c24xx/h1940.rst deleted +0 -0
Documentation/arm/samsung-s3c24xx/index.rst deleted +0 -0
Documentation/arm/samsung-s3c24xx/nand.rst deleted +0 -0
Documentation/arm/samsung-s3c24xx/overview.rst deleted +0 -0
Documentation/arm/samsung-s3c24xx/s3c2412.rst deleted +0 -0
Documentation/arm/samsung-s3c24xx/s3c2413.rst deleted +0 -0
Documentation/arm/samsung-s3c24xx/smdk2440.rst deleted +0 -0
Documentation/arm/samsung-s3c24xx/suspend.rst deleted +0 -0
Documentation/arm/samsung-s3c24xx/usb-host.rst deleted +0 -0
Documentation/arm/samsung/overview.rst +0 -13
@@ -12,21 +12,10 @@ Introduction The currently supported SoCs are: - - S3C24XX: See Documentation/arm/samsung-s3c24xx/overview.rst for full list - S3C64XX: S3C6400 and S3C6410 - S5PC110 / S5PV210 -S3C24XX Systems ---------------- - - There is still documentation in Documnetation/arm/Samsung-S3C24XX/ which - deals with the architecture and drivers specific to these devices. - - See Documentation/arm/samsung-s3c24xx/overview.rst for more information - on the implementation details and specific support. - - Configuration -------------
@@ -51,8 +40,6 @@ Layout specific information. It contains the base clock, GPIO and device definitions to get the system running. - plat-s3c24xx is for s3c24xx specific builds, see the S3C24XX docs. - plat-s5p is for s5p specific builds, and contains common support for the S5P specific systems. Not all S5Ps use all the features in this directory due to differences in the hardware.
MAINTAINERS +0 -16
@@ -2462,13 +2462,6 @@ L: [email protected] (moderated for non-subscribers) S: Maintained F: arch/arm64/boot/dts/freescale/s32g*.dts* -ARM/OPENMOKO NEO FREERUNNER (GTA02) MACHINE SUPPORT -L: [email protected] (subscribers-only) -S: Orphan -W: http://wiki.openmoko.org/wiki/Neo_FreeRunner -F: arch/arm/mach-s3c/gta02.h -F: arch/arm/mach-s3c/mach-gta02.c - ARM/Orion SoC/Technologic Systems TS-78xx platform support M: Alexander Clouter <[email protected]> L: [email protected] (moderated for non-subscribers)
@@ -2649,7 +2642,6 @@ F: include/linux/platform_data/*s3c* F: include/linux/serial_s3c.h F: include/linux/soc/samsung/ N: exynos -N: s3c2410 N: s3c64xx N: s5pv210
@@ -18673,14 +18665,6 @@ M: Simtec Linux Team <[email protected]> S: Supported W: http://www.simtec.co.uk/products/EB110ATX/ -SIMTEC EB2410ITX (BAST) -M: Simtec Linux Team <[email protected]> -S: Supported -W: http://www.simtec.co.uk/products/EB2410ITX/ -F: arch/arm/mach-s3c/bast-ide.c -F: arch/arm/mach-s3c/bast-irq.c -F: arch/arm/mach-s3c/mach-bast.c - SIOX M: Thorsten Scherer <[email protected]> M: Uwe Kleine-König <[email protected]>
arch/arm/Kconfig +1 -2
@@ -279,7 +279,6 @@ config PHYS_OFFSET default DRAM_BASE if !MMU default 0x00000000 if ARCH_FOOTBRIDGE default 0x10000000 if ARCH_OMAP1 || ARCH_RPC - default 0x30000000 if ARCH_S3C24XX default 0xa0000000 if ARCH_PXA default 0xc0000000 if ARCH_EP93XX || ARCH_SA1100 default 0
@@ -1154,7 +1153,7 @@ config ARCH_NR_GPIO default 1024 if ARCH_BRCMSTB || ARCH_RENESAS || ARCH_TEGRA || \ ARCH_ZYNQ || ARCH_ASPEED default 512 if ARCH_EXYNOS || ARCH_KEYSTONE || SOC_OMAP5 || \ - SOC_DRA7XX || ARCH_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210 + SOC_DRA7XX || ARCH_S3C64XX || ARCH_S5PV210 default 416 if ARCH_SUNXI default 392 if ARCH_U8500 default 352 if ARCH_VT8500
arch/arm/Kconfig.debug +4 -54
127 lines not on this page · raw message
arch/arm/Makefile +0 -2
@@ -143,8 +143,6 @@ CHECKFLAGS += -D__arm__ # during boot, and this offset is critical to the functioning of # kexec-tools. textofs-y := 0x00008000 -# We don't want the htc bootloader to corrupt kernel during resume -textofs-$(CONFIG_PM_H1940) := 0x00108000 # RTD1195 has Boot ROM at start of address space textofs-$(CONFIG_ARCH_REALTEK) := 0x00108000 # SA1111 DMA bug: we don't want the kernel to live in precious DMA-able memory
arch/arm/boot/dts/Makefile +0 -2
@@ -1156,8 +1156,6 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \ rk3288-veyron-speedy.dtb \ rk3288-veyron-tiger.dtb \ rk3288-vyasa.dtb -dtb-$(CONFIG_ARCH_S3C24XX) += \ - s3c2416-smdk2416.dtb dtb-$(CONFIG_ARCH_S3C64XX) += \ s3c6410-mini6410.dtb \ s3c6410-smdk6410.dtb
arch/arm/boot/dts/s3c2410-pinctrl.h deleted +0 -0
arch/arm/boot/dts/s3c2416-pinctrl.dtsi deleted +0 -0
arch/arm/boot/dts/s3c2416-smdk2416.dts deleted +0 -0
arch/arm/boot/dts/s3c2416.dtsi deleted +0 -0
arch/arm/boot/dts/s3c24xx.dtsi deleted +0 -0
arch/arm/configs/mini2440_defconfig deleted +0 -0
arch/arm/configs/s3c2410_defconfig deleted +0 -0
arch/arm/configs/tct_hammer_defconfig deleted +0 -0
arch/arm/mach-s3c/Kconfig +3 -24
@@ -2,13 +2,10 @@ # # Copyright 2009 Simtec Electronics -source "arch/arm/mach-s3c/Kconfig.s3c24xx" source "arch/arm/mach-s3c/Kconfig.s3c64xx" config PLAT_SAMSUNG - bool - depends on PLAT_S3C24XX || ARCH_S3C64XX - default y + def_bool ARCH_S3C64XX select GENERIC_IRQ_CHIP select NO_IOPORT_MAP select SOC_SAMSUNG
@@ -16,9 +13,8 @@ config PLAT_SAMSUNG Base platform code for all Samsung SoC based systems config SAMSUNG_PM - bool - depends on PM && (PLAT_S3C24XX || ARCH_S3C64XX) - default y + def_bool ARCH_S3C64XX + depends on PM help Base platform power management code for samsung code
@@ -99,11 +95,6 @@ config S3C_DEV_HSMMC3 help Compile in platform device definitions for HSMMC channel 3 -config S3C_DEV_HWMON - bool - help - Compile in platform device definitions for HWMON - config S3C_DEV_I2C1 bool help
@@ -156,7 +147,6 @@ config S3C_DEV_USB_HSOTG config S3C_DEV_WDT bool - default y if ARCH_S3C24XX help Compile in platform device definition for Watchdog Timer
@@ -180,22 +170,12 @@ config SAMSUNG_DEV_ADC help Compile in platform device definition for ADC controller -config SAMSUNG_DEV_IDE - bool - help - Compile in platform device definitions for IDE - config S3C64XX_DEV_SPI0 bool help Compile in platform device definitions for S3C64XX's type SPI controller 0 -config SAMSUNG_DEV_TS - bool - help - Common in platform device definitions for touchscreen device - config SAMSUNG_DEV_KEYPAD bool help
@@ -203,7 +183,6 @@ config SAMSUNG_DEV_KEYPAD config SAMSUNG_DEV_PWM bool - default y if ARCH_S3C24XX help Compile in platform device definition for PWM Timer
arch/arm/mach-s3c/Kconfig.s3c24xx deleted +0 -0
arch/arm/mach-s3c/Makefile +0 -4
@@ -2,10 +2,6 @@ # # Copyright 2009 Simtec Electronics -ifdef CONFIG_ARCH_S3C24XX -include $(src)/Makefile.s3c24xx -endif - ifdef CONFIG_ARCH_S3C64XX include $(src)/Makefile.s3c64xx endif
arch/arm/mach-s3c/Makefile.s3c24xx deleted +0 -0
arch/arm/mach-s3c/anubis.h deleted +0 -0
arch/arm/mach-s3c/bast-ide.c deleted +0 -0
arch/arm/mach-s3c/bast-irq.c deleted +0 -0
arch/arm/mach-s3c/bast.h deleted +0 -0
arch/arm/mach-s3c/common-smdk-s3c24xx.c deleted +0 -0
arch/arm/mach-s3c/common-smdk-s3c24xx.h deleted +0 -0
arch/arm/mach-s3c/cpufreq-utils-s3c24xx.c deleted +0 -0
arch/arm/mach-s3c/dma-s3c24xx.h deleted +0 -0
arch/arm/mach-s3c/fb-core-s3c24xx.h deleted +0 -0
arch/arm/mach-s3c/gpio-samsung-s3c24xx.h deleted +0 -0
arch/arm/mach-s3c/gta02.h deleted +0 -0
arch/arm/mach-s3c/h1940-bluetooth.c deleted +0 -0
arch/arm/mach-s3c/h1940.h deleted +0 -0
arch/arm/mach-s3c/hardware-s3c24xx.h deleted +0 -0
arch/arm/mach-s3c/iotiming-s3c2410.c deleted +0 -0
arch/arm/mach-s3c/iotiming-s3c2412.c deleted +0 -0
arch/arm/mach-s3c/irq-pm-s3c24xx.c deleted +0 -0
arch/arm/mach-s3c/irq-s3c24xx-fiq-exports.c deleted +0 -0
arch/arm/mach-s3c/irq-s3c24xx-fiq.S deleted +0 -0
arch/arm/mach-s3c/irq-s3c24xx.c deleted +0 -0
arch/arm/mach-s3c/irqs-s3c24xx.h deleted +0 -0
arch/arm/mach-s3c/mach-amlm5900.c deleted +0 -0
arch/arm/mach-s3c/mach-anubis.c deleted +0 -0
arch/arm/mach-s3c/mach-at2440evb.c deleted +0 -0
arch/arm/mach-s3c/mach-bast.c deleted +0 -0
arch/arm/mach-s3c/mach-gta02.c deleted +0 -0
arch/arm/mach-s3c/mach-h1940.c deleted +0 -0
arch/arm/mach-s3c/mach-jive.c deleted +0 -0
arch/arm/mach-s3c/mach-mini2440.c deleted +0 -0
arch/arm/mach-s3c/mach-n30.c deleted +0 -0
arch/arm/mach-s3c/mach-nexcoder.c deleted +0 -0
arch/arm/mach-s3c/mach-osiris-dvs.c deleted +0 -0
arch/arm/mach-s3c/mach-osiris.c deleted +0 -0
arch/arm/mach-s3c/mach-otom.c deleted +0 -0
arch/arm/mach-s3c/mach-qt2410.c deleted +0 -0
arch/arm/mach-s3c/mach-rx1950.c deleted +0 -0
arch/arm/mach-s3c/mach-rx3715.c deleted +0 -0
arch/arm/mach-s3c/mach-s3c2416-dt.c deleted +0 -0
arch/arm/mach-s3c/mach-smdk2410.c deleted +0 -0
arch/arm/mach-s3c/mach-smdk2413.c deleted +0 -0
arch/arm/mach-s3c/mach-smdk2416.c deleted +0 -0
arch/arm/mach-s3c/mach-smdk2440.c deleted +0 -0
arch/arm/mach-s3c/mach-smdk2443.c deleted +0 -0
arch/arm/mach-s3c/mach-tct_hammer.c deleted +0 -0
arch/arm/mach-s3c/mach-vr1000.c deleted +0 -0
arch/arm/mach-s3c/mach-vstms.c deleted +0 -0
arch/arm/mach-s3c/map-s3c24xx.h deleted +0 -0
arch/arm/mach-s3c/nand-core-s3c24xx.h deleted +0 -0
arch/arm/mach-s3c/osiris.h deleted +0 -0
arch/arm/mach-s3c/pll-s3c2410.c deleted +0 -0
arch/arm/mach-s3c/pll-s3c2440-12000000.c deleted +0 -0
arch/arm/mach-s3c/pll-s3c2440-16934400.c deleted +0 -0
arch/arm/mach-s3c/pm-core-s3c24xx.h deleted +0 -0
arch/arm/mach-s3c/pm-h1940.S deleted +0 -0
arch/arm/mach-s3c/pm-s3c2410.c deleted +0 -0
arch/arm/mach-s3c/pm-s3c2412.c deleted +0 -0
arch/arm/mach-s3c/pm-s3c2416.c deleted +0 -0
arch/arm/mach-s3c/pm-s3c24xx.c deleted +0 -0
arch/arm/mach-s3c/regs-clock-s3c24xx.h deleted +0 -0
arch/arm/mach-s3c/regs-dsc-s3c24xx.h deleted +0 -0
arch/arm/mach-s3c/regs-gpio-s3c24xx.h deleted +0 -0
arch/arm/mach-s3c/regs-irq-s3c24xx.h deleted +0 -0
arch/arm/mach-s3c/regs-mem-s3c24xx.h deleted +0 -0
arch/arm/mach-s3c/regs-s3c2443-clock.h deleted +0 -0
arch/arm/mach-s3c/rtc-core-s3c24xx.h deleted +0 -0
arch/arm/mach-s3c/s3c2410.c deleted +0 -0
arch/arm/mach-s3c/s3c2412-power.h deleted +0 -0
arch/arm/mach-s3c/s3c2412.c deleted +0 -0
arch/arm/mach-s3c/s3c2412.h deleted +0 -0
arch/arm/mach-s3c/s3c2416.c deleted +0 -0
arch/arm/mach-s3c/s3c2440.c deleted +0 -0
arch/arm/mach-s3c/s3c2442.c deleted +0 -0
arch/arm/mach-s3c/s3c2443.c deleted +0 -0
arch/arm/mach-s3c/s3c244x.c deleted +0 -0
arch/arm/mach-s3c/s3c24xx.c deleted +0 -0
arch/arm/mach-s3c/s3c24xx.h deleted +0 -0
arch/arm/mach-s3c/setup-i2c-s3c24xx.c deleted +0 -0
arch/arm/mach-s3c/setup-sdhci-gpio-s3c24xx.c deleted +0 -0
arch/arm/mach-s3c/setup-spi-s3c24xx.c deleted +0 -0
arch/arm/mach-s3c/setup-ts-s3c24xx.c deleted +0 -0
arch/arm/mach-s3c/simtec-audio.c deleted +0 -0
arch/arm/mach-s3c/simtec-nor.c deleted +0 -0
arch/arm/mach-s3c/simtec-pm.c deleted +0 -0
arch/arm/mach-s3c/simtec-usb.c deleted +0 -0
arch/arm/mach-s3c/simtec.h deleted +0 -0
arch/arm/mach-s3c/sleep-s3c2410.S deleted +0 -0
arch/arm/mach-s3c/sleep-s3c2412.S deleted +0 -0
arch/arm/mach-s3c/sleep-s3c24xx.S deleted +0 -0
arch/arm/mach-s3c/spi-core-s3c24xx.h deleted +0 -0
arch/arm/mach-s3c/vr1000.h deleted +0 -0
drivers/soc/samsung/Kconfig +0 -4
@@ -85,8 +85,6 @@ config SAMSUNG_PM_CHECK Note, this can take several seconds depending on memory size and CPU speed. - See <file:Documentation/arm/samsung-s3c24xx/suspend.rst> - config SAMSUNG_PM_CHECK_CHUNKSIZE int "S3C2410 PM Suspend CRC Chunksize (KiB)" depends on PM && SAMSUNG_PM_CHECK
@@ -97,8 +95,6 @@ config SAMSUNG_PM_CHECK_CHUNKSIZE the CRC data block will take more memory, but will identify any faults with better precision. - See <file:Documentation/arm/samsung-s3c24xx/suspend.rst> - config EXYNOS_REGULATOR_COUPLER bool "Exynos SoC Regulator Coupler" if COMPILE_TEST depends on ARCH_EXYNOS || COMPILE_TEST
include/dt-bindings/clock/s3c2410.h deleted +0 -0
include/dt-bindings/clock/s3c2412.h deleted +0 -0
include/dt-bindings/clock/s3c2443.h deleted +0 -0
include/linux/amba/pl093.h deleted +0 -0
Signature · 1 line
2.29.2
Re: [PATCH 01/21] ARM: s3c: remove all s3c24xx support
Am Freitag, 21. Oktober 2022, 22:27:34 CEST schrieb Arnd Bergmann:
Quoted 7 lines
From: Arnd Bergmann <[email protected]>
The platform was deprecated in commit
6a5e69c7ddea("ARM: s3c: mark as deprecated and schedule removal") and can be removed. This includes all files that are exclusively for s3c24xx and not shared with s3c64xx, as well as the glue logic inKconfigand the maintainer file entries.
Quoted 8 lines
Cc Arnaud Patard <[email protected]>Cc Ben Dooks <[email protected]>Cc Christer Weinigel <[email protected]>Cc Guillaume GOURAT <[email protected]>Cc Heiko Stuebner <[email protected]>Cc Simtec Linux Team <[email protected]>Signed-off-by Arnd Bergmann <[email protected]>
So many memories of me starting out in the kernel on s3c24xx. But it's no use trying to keep stuff around that nobody will likely ever use again. So with a sad face
though you might want to also include
drivers/dma/s3c24xx-dma.c
Heiko
Quoted 990 lines
--- Documentation/arm/index.rst | 1 - Documentation/arm/samsung-s3c24xx/cpufreq.rst | 77 - .../arm/samsung-s3c24xx/eb2410itx.rst | 59 - Documentation/arm/samsung-s3c24xx/gpio.rst | 172 --- Documentation/arm/samsung-s3c24xx/h1940.rst | 41 - Documentation/arm/samsung-s3c24xx/index.rst | 20 - Documentation/arm/samsung-s3c24xx/nand.rst | 30 - .../arm/samsung-s3c24xx/overview.rst | 311 ---- Documentation/arm/samsung-s3c24xx/s3c2412.rst | 121 -- Documentation/arm/samsung-s3c24xx/s3c2413.rst | 22 - .../arm/samsung-s3c24xx/smdk2440.rst | 57 - Documentation/arm/samsung-s3c24xx/suspend.rst | 137 -- .../arm/samsung-s3c24xx/usb-host.rst | 91 -- Documentation/arm/samsung/overview.rst | 13 - MAINTAINERS | 16 - arch/arm/Kconfig | 3 +- arch/arm/Kconfig.debug | 58 +- arch/arm/Makefile | 2 - arch/arm/boot/dts/Makefile | 2 - arch/arm/boot/dts/s3c2410-pinctrl.h | 19 - arch/arm/boot/dts/s3c2416-pinctrl.dtsi | 172 --- arch/arm/boot/dts/s3c2416-smdk2416.dts | 77 - arch/arm/boot/dts/s3c2416.dtsi | 124 -- arch/arm/boot/dts/s3c24xx.dtsi | 92 -- arch/arm/configs/mini2440_defconfig | 338 ----- arch/arm/configs/s3c2410_defconfig | 437 ------ arch/arm/configs/tct_hammer_defconfig | 58 - arch/arm/mach-s3c/Kconfig | 27 +- arch/arm/mach-s3c/Kconfig.s3c24xx | 604 -------- arch/arm/mach-s3c/Makefile | 4 - arch/arm/mach-s3c/Makefile.s3c24xx | 102 -- arch/arm/mach-s3c/anubis.h | 50 - arch/arm/mach-s3c/bast-ide.c | 82 - arch/arm/mach-s3c/bast-irq.c | 137 -- arch/arm/mach-s3c/bast.h | 194 --- arch/arm/mach-s3c/common-smdk-s3c24xx.c | 228 --- arch/arm/mach-s3c/common-smdk-s3c24xx.h | 11 - arch/arm/mach-s3c/cpufreq-utils-s3c24xx.c | 94 -- arch/arm/mach-s3c/dma-s3c24xx.h | 51 - arch/arm/mach-s3c/fb-core-s3c24xx.h | 24 - arch/arm/mach-s3c/gpio-samsung-s3c24xx.h | 103 -- arch/arm/mach-s3c/gta02.h | 20 - arch/arm/mach-s3c/h1940-bluetooth.c | 140 -- arch/arm/mach-s3c/h1940.h | 52 - arch/arm/mach-s3c/hardware-s3c24xx.h | 14 - arch/arm/mach-s3c/iotiming-s3c2410.c | 472 ------ arch/arm/mach-s3c/iotiming-s3c2412.c | 278 ---- arch/arm/mach-s3c/irq-pm-s3c24xx.c | 115 -- arch/arm/mach-s3c/irq-s3c24xx-fiq-exports.c | 9 - arch/arm/mach-s3c/irq-s3c24xx-fiq.S | 112 -- arch/arm/mach-s3c/irq-s3c24xx.c | 1352 ----------------- arch/arm/mach-s3c/irqs-s3c24xx.h | 219 --- arch/arm/mach-s3c/mach-amlm5900.c | 248 --- arch/arm/mach-s3c/mach-anubis.c | 422 ----- arch/arm/mach-s3c/mach-at2440evb.c | 233 --- arch/arm/mach-s3c/mach-bast.c | 583 ------- arch/arm/mach-s3c/mach-gta02.c | 588 ------- arch/arm/mach-s3c/mach-h1940.c | 809 ---------- arch/arm/mach-s3c/mach-jive.c | 693 --------- arch/arm/mach-s3c/mach-mini2440.c | 804 ---------- arch/arm/mach-s3c/mach-n30.c | 682 --------- arch/arm/mach-s3c/mach-nexcoder.c | 162 -- arch/arm/mach-s3c/mach-osiris-dvs.c | 178 --- arch/arm/mach-s3c/mach-osiris.c | 405 ----- arch/arm/mach-s3c/mach-otom.c | 124 -- arch/arm/mach-s3c/mach-qt2410.c | 375 ----- arch/arm/mach-s3c/mach-rx1950.c | 884 ----------- arch/arm/mach-s3c/mach-rx3715.c | 213 --- arch/arm/mach-s3c/mach-s3c2416-dt.c | 48 - arch/arm/mach-s3c/mach-smdk2410.c | 112 -- arch/arm/mach-s3c/mach-smdk2413.c | 169 --- arch/arm/mach-s3c/mach-smdk2416.c | 248 --- arch/arm/mach-s3c/mach-smdk2440.c | 180 --- arch/arm/mach-s3c/mach-smdk2443.c | 126 -- arch/arm/mach-s3c/mach-tct_hammer.c | 157 -- arch/arm/mach-s3c/mach-vr1000.c | 364 ----- arch/arm/mach-s3c/mach-vstms.c | 166 -- arch/arm/mach-s3c/map-s3c24xx.h | 159 -- arch/arm/mach-s3c/nand-core-s3c24xx.h | 24 - arch/arm/mach-s3c/osiris.h | 50 - arch/arm/mach-s3c/pll-s3c2410.c | 83 - arch/arm/mach-s3c/pll-s3c2440-12000000.c | 95 -- arch/arm/mach-s3c/pll-s3c2440-16934400.c | 122 -- arch/arm/mach-s3c/pm-core-s3c24xx.h | 96 -- arch/arm/mach-s3c/pm-h1940.S | 19 - arch/arm/mach-s3c/pm-s3c2410.c | 170 --- arch/arm/mach-s3c/pm-s3c2412.c | 126 -- arch/arm/mach-s3c/pm-s3c2416.c | 81 - arch/arm/mach-s3c/pm-s3c24xx.c | 121 -- arch/arm/mach-s3c/regs-clock-s3c24xx.h | 146 -- arch/arm/mach-s3c/regs-dsc-s3c24xx.h | 22 - arch/arm/mach-s3c/regs-gpio-s3c24xx.h | 608 -------- arch/arm/mach-s3c/regs-irq-s3c24xx.h | 51 - arch/arm/mach-s3c/regs-mem-s3c24xx.h | 53 - arch/arm/mach-s3c/regs-s3c2443-clock.h | 238 --- arch/arm/mach-s3c/rtc-core-s3c24xx.h | 23 - arch/arm/mach-s3c/s3c2410.c | 130 -- arch/arm/mach-s3c/s3c2412-power.h | 34 - arch/arm/mach-s3c/s3c2412.c | 175 --- arch/arm/mach-s3c/s3c2412.h | 25 - arch/arm/mach-s3c/s3c2416.c | 132 -- arch/arm/mach-s3c/s3c2440.c | 71 - arch/arm/mach-s3c/s3c2442.c | 62 - arch/arm/mach-s3c/s3c2443.c | 112 -- arch/arm/mach-s3c/s3c244x.c | 128 -- arch/arm/mach-s3c/s3c24xx.c | 687 --------- arch/arm/mach-s3c/s3c24xx.h | 124 -- arch/arm/mach-s3c/setup-i2c-s3c24xx.c | 23 - arch/arm/mach-s3c/setup-sdhci-gpio-s3c24xx.c | 31 - arch/arm/mach-s3c/setup-spi-s3c24xx.c | 27 - arch/arm/mach-s3c/setup-ts-s3c24xx.c | 29 - arch/arm/mach-s3c/simtec-audio.c | 76 - arch/arm/mach-s3c/simtec-nor.c | 74 - arch/arm/mach-s3c/simtec-pm.c | 60 - arch/arm/mach-s3c/simtec-usb.c | 125 -- arch/arm/mach-s3c/simtec.h | 17 - arch/arm/mach-s3c/sleep-s3c2410.S | 54 - arch/arm/mach-s3c/sleep-s3c2412.S | 53 - arch/arm/mach-s3c/sleep-s3c24xx.S | 69 - arch/arm/mach-s3c/spi-core-s3c24xx.h | 21 - arch/arm/mach-s3c/vr1000.h | 113 -- drivers/soc/samsung/Kconfig | 4 - include/dt-bindings/clock/s3c2410.h | 59 - include/dt-bindings/clock/s3c2412.h | 70 - include/dt-bindings/clock/s3c2443.h | 91 -- include/linux/amba/pl093.h | 77 - 126 files changed, 8 insertions(+), 21049 deletions(-) delete mode 100644 Documentation/arm/samsung-s3c24xx/cpufreq.rst delete mode 100644 Documentation/arm/samsung-s3c24xx/eb2410itx.rst delete mode 100644 Documentation/arm/samsung-s3c24xx/gpio.rst delete mode 100644 Documentation/arm/samsung-s3c24xx/h1940.rst delete mode 100644 Documentation/arm/samsung-s3c24xx/index.rst delete mode 100644 Documentation/arm/samsung-s3c24xx/nand.rst delete mode 100644 Documentation/arm/samsung-s3c24xx/overview.rst delete mode 100644 Documentation/arm/samsung-s3c24xx/s3c2412.rst delete mode 100644 Documentation/arm/samsung-s3c24xx/s3c2413.rst delete mode 100644 Documentation/arm/samsung-s3c24xx/smdk2440.rst delete mode 100644 Documentation/arm/samsung-s3c24xx/suspend.rst delete mode 100644 Documentation/arm/samsung-s3c24xx/usb-host.rst delete mode 100644 arch/arm/boot/dts/s3c2410-pinctrl.h delete mode 100644 arch/arm/boot/dts/s3c2416-pinctrl.dtsi delete mode 100644 arch/arm/boot/dts/s3c2416-smdk2416.dts delete mode 100644 arch/arm/boot/dts/s3c2416.dtsi delete mode 100644 arch/arm/boot/dts/s3c24xx.dtsi delete mode 100644 arch/arm/configs/mini2440_defconfig delete mode 100644 arch/arm/configs/s3c2410_defconfig delete mode 100644 arch/arm/configs/tct_hammer_defconfig delete mode 100644 arch/arm/mach-s3c/Kconfig.s3c24xx delete mode 100644 arch/arm/mach-s3c/Makefile.s3c24xx delete mode 100644 arch/arm/mach-s3c/anubis.h delete mode 100644 arch/arm/mach-s3c/bast-ide.c delete mode 100644 arch/arm/mach-s3c/bast-irq.c delete mode 100644 arch/arm/mach-s3c/bast.h delete mode 100644 arch/arm/mach-s3c/common-smdk-s3c24xx.c delete mode 100644 arch/arm/mach-s3c/common-smdk-s3c24xx.h delete mode 100644 arch/arm/mach-s3c/cpufreq-utils-s3c24xx.c delete mode 100644 arch/arm/mach-s3c/dma-s3c24xx.h delete mode 100644 arch/arm/mach-s3c/fb-core-s3c24xx.h delete mode 100644 arch/arm/mach-s3c/gpio-samsung-s3c24xx.h delete mode 100644 arch/arm/mach-s3c/gta02.h delete mode 100644 arch/arm/mach-s3c/h1940-bluetooth.c delete mode 100644 arch/arm/mach-s3c/h1940.h delete mode 100644 arch/arm/mach-s3c/hardware-s3c24xx.h delete mode 100644 arch/arm/mach-s3c/iotiming-s3c2410.c delete mode 100644 arch/arm/mach-s3c/iotiming-s3c2412.c delete mode 100644 arch/arm/mach-s3c/irq-pm-s3c24xx.c delete mode 100644 arch/arm/mach-s3c/irq-s3c24xx-fiq-exports.c delete mode 100644 arch/arm/mach-s3c/irq-s3c24xx-fiq.S delete mode 100644 arch/arm/mach-s3c/irq-s3c24xx.c delete mode 100644 arch/arm/mach-s3c/irqs-s3c24xx.h delete mode 100644 arch/arm/mach-s3c/mach-amlm5900.c delete mode 100644 arch/arm/mach-s3c/mach-anubis.c delete mode 100644 arch/arm/mach-s3c/mach-at2440evb.c delete mode 100644 arch/arm/mach-s3c/mach-bast.c delete mode 100644 arch/arm/mach-s3c/mach-gta02.c delete mode 100644 arch/arm/mach-s3c/mach-h1940.c delete mode 100644 arch/arm/mach-s3c/mach-jive.c delete mode 100644 arch/arm/mach-s3c/mach-mini2440.c delete mode 100644 arch/arm/mach-s3c/mach-n30.c delete mode 100644 arch/arm/mach-s3c/mach-nexcoder.c delete mode 100644 arch/arm/mach-s3c/mach-osiris-dvs.c delete mode 100644 arch/arm/mach-s3c/mach-osiris.c delete mode 100644 arch/arm/mach-s3c/mach-otom.c delete mode 100644 arch/arm/mach-s3c/mach-qt2410.c delete mode 100644 arch/arm/mach-s3c/mach-rx1950.c delete mode 100644 arch/arm/mach-s3c/mach-rx3715.c delete mode 100644 arch/arm/mach-s3c/mach-s3c2416-dt.c delete mode 100644 arch/arm/mach-s3c/mach-smdk2410.c delete mode 100644 arch/arm/mach-s3c/mach-smdk2413.c delete mode 100644 arch/arm/mach-s3c/mach-smdk2416.c delete mode 100644 arch/arm/mach-s3c/mach-smdk2440.c delete mode 100644 arch/arm/mach-s3c/mach-smdk2443.c delete mode 100644 arch/arm/mach-s3c/mach-tct_hammer.c delete mode 100644 arch/arm/mach-s3c/mach-vr1000.c delete mode 100644 arch/arm/mach-s3c/mach-vstms.c delete mode 100644 arch/arm/mach-s3c/map-s3c24xx.h delete mode 100644 arch/arm/mach-s3c/nand-core-s3c24xx.h delete mode 100644 arch/arm/mach-s3c/osiris.h delete mode 100644 arch/arm/mach-s3c/pll-s3c2410.c delete mode 100644 arch/arm/mach-s3c/pll-s3c2440-12000000.c delete mode 100644 arch/arm/mach-s3c/pll-s3c2440-16934400.c delete mode 100644 arch/arm/mach-s3c/pm-core-s3c24xx.h delete mode 100644 arch/arm/mach-s3c/pm-h1940.S delete mode 100644 arch/arm/mach-s3c/pm-s3c2410.c delete mode 100644 arch/arm/mach-s3c/pm-s3c2412.c delete mode 100644 arch/arm/mach-s3c/pm-s3c2416.c delete mode 100644 arch/arm/mach-s3c/pm-s3c24xx.c delete mode 100644 arch/arm/mach-s3c/regs-clock-s3c24xx.h delete mode 100644 arch/arm/mach-s3c/regs-dsc-s3c24xx.h delete mode 100644 arch/arm/mach-s3c/regs-gpio-s3c24xx.h delete mode 100644 arch/arm/mach-s3c/regs-irq-s3c24xx.h delete mode 100644 arch/arm/mach-s3c/regs-mem-s3c24xx.h delete mode 100644 arch/arm/mach-s3c/regs-s3c2443-clock.h delete mode 100644 arch/arm/mach-s3c/rtc-core-s3c24xx.h delete mode 100644 arch/arm/mach-s3c/s3c2410.c delete mode 100644 arch/arm/mach-s3c/s3c2412-power.h delete mode 100644 arch/arm/mach-s3c/s3c2412.c delete mode 100644 arch/arm/mach-s3c/s3c2412.h delete mode 100644 arch/arm/mach-s3c/s3c2416.c delete mode 100644 arch/arm/mach-s3c/s3c2440.c delete mode 100644 arch/arm/mach-s3c/s3c2442.c delete mode 100644 arch/arm/mach-s3c/s3c2443.c delete mode 100644 arch/arm/mach-s3c/s3c244x.c delete mode 100644 arch/arm/mach-s3c/s3c24xx.c delete mode 100644 arch/arm/mach-s3c/s3c24xx.h delete mode 100644 arch/arm/mach-s3c/setup-i2c-s3c24xx.c delete mode 100644 arch/arm/mach-s3c/setup-sdhci-gpio-s3c24xx.c delete mode 100644 arch/arm/mach-s3c/setup-spi-s3c24xx.c delete mode 100644 arch/arm/mach-s3c/setup-ts-s3c24xx.c delete mode 100644 arch/arm/mach-s3c/simtec-audio.c delete mode 100644 arch/arm/mach-s3c/simtec-nor.c delete mode 100644 arch/arm/mach-s3c/simtec-pm.c delete mode 100644 arch/arm/mach-s3c/simtec-usb.c delete mode 100644 arch/arm/mach-s3c/simtec.h delete mode 100644 arch/arm/mach-s3c/sleep-s3c2410.S delete mode 100644 arch/arm/mach-s3c/sleep-s3c2412.S delete mode 100644 arch/arm/mach-s3c/sleep-s3c24xx.S delete mode 100644 arch/arm/mach-s3c/spi-core-s3c24xx.h delete mode 100644 arch/arm/mach-s3c/vr1000.h delete mode 100644 include/dt-bindings/clock/s3c2410.h delete mode 100644 include/dt-bindings/clock/s3c2412.h delete mode 100644 include/dt-bindings/clock/s3c2443.h delete mode 100644 include/linux/amba/pl093.hDocumentation/arm/index.rst +0
-1@@ -64,7 +64,6 @@ SoC-specific documents sunxi samsung/index - samsung-s3c24xx/index sunxi/clocksDocumentation/arm/samsung-s3c24xx/cpufreq.rst deleted +0
-0Documentation/arm/samsung-s3c24xx/eb2410itx.rst deleted +0
-0Documentation/arm/samsung-s3c24xx/gpio.rst deleted +0
-0Documentation/arm/samsung-s3c24xx/h1940.rst deleted +0
-0Documentation/arm/samsung-s3c24xx/index.rst deleted +0
-0Documentation/arm/samsung-s3c24xx/nand.rst deleted +0
-0Documentation/arm/samsung-s3c24xx/overview.rst deleted +0
-0Documentation/arm/samsung-s3c24xx/s3c2412.rst deleted +0
-0Documentation/arm/samsung-s3c24xx/s3c2413.rst deleted +0
-0Documentation/arm/samsung-s3c24xx/smdk2440.rst deleted +0
-0Documentation/arm/samsung-s3c24xx/suspend.rst deleted +0
-0Documentation/arm/samsung-s3c24xx/usb-host.rst deleted +0
-0Documentation/arm/samsung/overview.rst +0
-13@@ -12,21 +12,10 @@ Introduction The currently supported SoCs are: - - S3C24XX: See Documentation/arm/samsung-s3c24xx/overview.rst for full list - S3C64XX: S3C6400 and S3C6410 - S5PC110 / S5PV210 -S3C24XX Systems ---------------- - - There is still documentation in Documnetation/arm/Samsung-S3C24XX/ which - deals with the architecture and drivers specific to these devices. - - See Documentation/arm/samsung-s3c24xx/overview.rst for more information - on the implementation details and specific support. - - Configuration -------------@@ -51,8 +40,6 @@ Layout specific information. It contains the base clock, GPIO and device definitions to get the system running. - plat-s3c24xx is for s3c24xx specific builds, see the S3C24XX docs. - plat-s5p is for s5p specific builds, and contains common support for the S5P specific systems. Not all S5Ps use all the features in this directory due to differences in the hardware.MAINTAINERS +0
-16@@ -2462,13 +2462,6 @@ L: [email protected] (moderated for non-subscribers) S: Maintained F: arch/arm64/boot/dts/freescale/s32g*.dts* -ARM/OPENMOKO NEO FREERUNNER (GTA02) MACHINE SUPPORT -L: [email protected] (subscribers-only) -S: Orphan -W: http://wiki.openmoko.org/wiki/Neo_FreeRunner -F: arch/arm/mach-s3c/gta02.h -F: arch/arm/mach-s3c/mach-gta02.c - ARM/Orion SoC/Technologic Systems TS-78xx platform support M: Alexander Clouter <[email protected]> L: [email protected] (moderated for non-subscribers)@@ -2649,7 +2642,6 @@ F: include/linux/platform_data/*s3c* F: include/linux/serial_s3c.h F: include/linux/soc/samsung/ N: exynos -N: s3c2410 N: s3c64xx N: s5pv210@@ -18673,14 +18665,6 @@ M: Simtec Linux Team <[email protected]> S: Supported W: http://www.simtec.co.uk/products/EB110ATX/ -SIMTEC EB2410ITX (BAST) -M: Simtec Linux Team <[email protected]> -S: Supported -W: http://www.simtec.co.uk/products/EB2410ITX/ -F: arch/arm/mach-s3c/bast-ide.c -F: arch/arm/mach-s3c/bast-irq.c -F: arch/arm/mach-s3c/mach-bast.c - SIOX M: Thorsten Scherer <[email protected]> M: Uwe Kleine-König <[email protected]>arch/arm/Kconfig +1
-2@@ -279,7 +279,6 @@ config PHYS_OFFSET default DRAM_BASE if !MMU default 0x00000000 if ARCH_FOOTBRIDGE default 0x10000000 if ARCH_OMAP1 || ARCH_RPC - default 0x30000000 if ARCH_S3C24XX default 0xa0000000 if ARCH_PXA default 0xc0000000 if ARCH_EP93XX || ARCH_SA1100 default 0@@ -1154,7 +1153,7 @@ config ARCH_NR_GPIO default 1024 if ARCH_BRCMSTB || ARCH_RENESAS || ARCH_TEGRA || \ ARCH_ZYNQ || ARCH_ASPEED default 512 if ARCH_EXYNOS || ARCH_KEYSTONE || SOC_OMAP5 || \ - SOC_DRA7XX || ARCH_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210 + SOC_DRA7XX || ARCH_S3C64XX || ARCH_S5PV210 default 416 if ARCH_SUNXI default 392 if ARCH_U8500 default 352 if ARCH_VT8500arch/arm/Kconfig.debug +4
-54@@ -1006,7 +1006,6 @@ choice config DEBUG_S3C_UART0 depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS select DEBUG_EXYNOS_UART if ARCH_EXYNOS - select DEBUG_S3C24XX_UART if ARCH_S3C24XX select DEBUG_S3C64XX_UART if ARCH_S3C64XX select DEBUG_S5PV210_UART if ARCH_S5PV210 bool "Use Samsung S3C UART 0 for low-level debug"@@ -1018,7 +1017,6 @@ choice config DEBUG_S3C_UART1 depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS select DEBUG_EXYNOS_UART if ARCH_EXYNOS - select DEBUG_S3C24XX_UART if ARCH_S3C24XX select DEBUG_S3C64XX_UART if ARCH_S3C64XX select DEBUG_S5PV210_UART if ARCH_S5PV210 bool "Use Samsung S3C UART 1 for low-level debug"@@ -1030,7 +1028,6 @@ choice config DEBUG_S3C_UART2 depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS select DEBUG_EXYNOS_UART if ARCH_EXYNOS - select DEBUG_S3C24XX_UART if ARCH_S3C24XX select DEBUG_S3C64XX_UART if ARCH_S3C64XX select DEBUG_S5PV210_UART if ARCH_S5PV210 bool "Use Samsung S3C UART 2 for low-level debug"@@ -1050,33 +1047,6 @@ choice their output to UART 3. The port must have been initialised by the boot-loader before use. - config DEBUG_S3C2410_UART0 - depends on ARCH_S3C24XX - select DEBUG_S3C2410_UART - bool "Use S3C2410/S3C2412 UART 0 for low-level debug" - help - Say Y here if you want the debug print routines to direct - their output to UART 0. The port must have been initialised - by the boot-loader before use. - - config DEBUG_S3C2410_UART1 - depends on ARCH_S3C24XX - select DEBUG_S3C2410_UART - bool "Use S3C2410/S3C2412 UART 1 for low-level debug" - help - Say Y here if you want the debug print routines to direct - their output to UART 1. The port must have been initialised - by the boot-loader before use. - - config DEBUG_S3C2410_UART2 - depends on ARCH_S3C24XX - select DEBUG_S3C2410_UART - bool "Use S3C2410/S3C2412 UART 2 for low-level debug" - help - Say Y here if you want the debug print routines to direct - their output to UART 2. The port must have been initialised - by the boot-loader before use. - config DEBUG_SA1100 depends on ARCH_SA1100 bool "Use SA1100 UARTs for low-level debug"@@ -1439,13 +1409,6 @@ config DEBUG_AT91_UART config DEBUG_EXYNOS_UART bool -config DEBUG_S3C2410_UART - bool - select DEBUG_S3C24XX_UART - -config DEBUG_S3C24XX_UART - bool - config DEBUG_S3C64XX_UART bool@@ -1453,8 +1416,7 @@ config DEBUG_S5PV210_UART bool config DEBUG_S3C_UART - depends on DEBUG_S3C2410_UART || DEBUG_S3C24XX_UART || \ - DEBUG_S3C64XX_UART || DEBUG_S5PV210_UART || \ + depends on DEBUG_S3C64XX_UART || DEBUG_S5PV210_UART || \ DEBUG_EXYNOS_UART int default "0" if DEBUG_S3C_UART0@@ -1555,7 +1517,7 @@ config DEBUG_LL_INCLUDE default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA0 default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA1 default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA4 - default "debug/s3c24xx.S" if DEBUG_S3C24XX_UART || DEBUG_S3C64XX_UART + default "debug/s3c24xx.S" if DEBUG_S3C64XX_UART default "debug/s5pv210.S" if DEBUG_S5PV210_UART default "debug/sti.S" if DEBUG_STIH41X_ASC2 default "debug/sti.S" if DEBUG_STIH41X_SBC_ASC1@@ -1638,12 +1600,6 @@ config DEBUG_UART_PHYS default 0x4806e000 if DEBUG_OMAP2UART3 || DEBUG_OMAP4UART4 default 0x49020000 if DEBUG_OMAP3UART3 default 0x49042000 if DEBUG_OMAP3UART4 - default 0x50000000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART0 || \ - DEBUG_S3C2410_UART0) - default 0x50004000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART1 || \ - DEBUG_S3C2410_UART1) - default 0x50008000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART2 || \ - DEBUG_S3C2410_UART2) default 0x7c0003f8 if DEBUG_FOOTBRIDGE_COM1 default 0x7f005000 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART0 default 0x7f005400 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART1@@ -1711,7 +1667,7 @@ config DEBUG_UART_PHYS DEBUG_RCAR_GEN2_SCIF2 || DEBUG_RCAR_GEN2_SCIF4 || \ DEBUG_RCAR_GEN2_SCIFA2 || \ DEBUG_RMOBILE_SCIFA0 || DEBUG_RMOBILE_SCIFA1 || \ - DEBUG_RMOBILE_SCIFA4 || DEBUG_S3C24XX_UART || \ + DEBUG_RMOBILE_SCIFA4 || \ DEBUG_S3C64XX_UART || \ DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \ DEBUG_DIGICOLOR_UA0 || \@@ -1748,15 +1704,9 @@ config DEBUG_UART_VIRT default 0xf6200000 if DEBUG_PXA_UART1 default 0xf7000000 if DEBUG_SUN9I_UART0 default 0xf7000000 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART0 - default 0xf7000000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART0 || \ - DEBUG_S3C2410_UART0) default 0xf7000400 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART1 default 0xf7000800 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART2 default 0xf7000c00 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART3 - default 0xf7004000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART1 || \ - DEBUG_S3C2410_UART1) - default 0xf7008000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART2 || \ - DEBUG_S3C2410_UART2) default 0xf7020000 if DEBUG_AT91_SAMA5D2_UART1 default 0xf7fc9000 if DEBUG_BERLIN_UART default 0xf8007000 if DEBUG_HIP04_UART@@ -1820,7 +1770,7 @@ config DEBUG_UART_VIRT default DEBUG_UART_PHYS if !MMU depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \ DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \ - DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART || \ + DEBUG_QCOM_UARTDM || \ DEBUG_S3C64XX_UART || \ DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \ DEBUG_DIGICOLOR_UA0 || \arch/arm/Makefile +0
-2@@ -143,8 +143,6 @@ CHECKFLAGS += -D__arm__ # during boot, and this offset is critical to the functioning of # kexec-tools. textofs-y := 0x00008000 -# We don't want the htc bootloader to corrupt kernel during resume -textofs-$(CONFIG_PM_H1940) := 0x00108000 # RTD1195 has Boot ROM at start of address space textofs-$(CONFIG_ARCH_REALTEK) := 0x00108000 # SA1111 DMA bug: we don't want the kernel to live in precious DMA-able memoryarch/arm/boot/dts/Makefile +0
-2@@ -1156,8 +1156,6 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \ rk3288-veyron-speedy.dtb \ rk3288-veyron-tiger.dtb \ rk3288-vyasa.dtb -dtb-$(CONFIG_ARCH_S3C24XX) += \ - s3c2416-smdk2416.dtb dtb-$(CONFIG_ARCH_S3C64XX) += \ s3c6410-mini6410.dtb \ s3c6410-smdk6410.dtbarch/arm/boot/dts/s3c2410-pinctrl.h deleted +0
-0arch/arm/boot/dts/s3c2416-pinctrl.dtsi deleted +0
-0arch/arm/boot/dts/s3c2416-smdk2416.dts deleted +0
-0arch/arm/boot/dts/s3c2416.dtsi deleted +0
-0arch/arm/boot/dts/s3c24xx.dtsi deleted +0
-0arch/arm/configs/mini2440_defconfig deleted +0
-0arch/arm/configs/s3c2410_defconfig deleted +0
-0arch/arm/configs/tct_hammer_defconfig deleted +0
-0arch/arm/mach-s3c/Kconfig +3
-24@@ -2,13 +2,10 @@ # # Copyright 2009 Simtec Electronics -source "arch/arm/mach-s3c/Kconfig.s3c24xx" source "arch/arm/mach-s3c/Kconfig.s3c64xx" config PLAT_SAMSUNG - bool - depends on PLAT_S3C24XX || ARCH_S3C64XX - default y + def_bool ARCH_S3C64XX select GENERIC_IRQ_CHIP select NO_IOPORT_MAP select SOC_SAMSUNG@@ -16,9 +13,8 @@ config PLAT_SAMSUNG Base platform code for all Samsung SoC based systems config SAMSUNG_PM - bool - depends on PM && (PLAT_S3C24XX || ARCH_S3C64XX) - default y + def_bool ARCH_S3C64XX + depends on PM help Base platform power management code for samsung code@@ -99,11 +95,6 @@ config S3C_DEV_HSMMC3 help Compile in platform device definitions for HSMMC channel 3 -config S3C_DEV_HWMON - bool - help - Compile in platform device definitions for HWMON - config S3C_DEV_I2C1 bool help@@ -156,7 +147,6 @@ config S3C_DEV_USB_HSOTG config S3C_DEV_WDT bool - default y if ARCH_S3C24XX help Compile in platform device definition for Watchdog Timer@@ -180,22 +170,12 @@ config SAMSUNG_DEV_ADC help Compile in platform device definition for ADC controller -config SAMSUNG_DEV_IDE - bool - help - Compile in platform device definitions for IDE - config S3C64XX_DEV_SPI0 bool help Compile in platform device definitions for S3C64XX's type SPI controller 0 -config SAMSUNG_DEV_TS - bool - help - Common in platform device definitions for touchscreen device - config SAMSUNG_DEV_KEYPAD bool help@@ -203,7 +183,6 @@ config SAMSUNG_DEV_KEYPAD config SAMSUNG_DEV_PWM bool - default y if ARCH_S3C24XX help Compile in platform device definition for PWM Timerarch/arm/mach-s3c/Kconfig.s3c24xx deleted +0
-0arch/arm/mach-s3c/Makefile +0
-4@@ -2,10 +2,6 @@ # # Copyright 2009 Simtec Electronics -ifdef CONFIG_ARCH_S3C24XX -include $(src)/Makefile.s3c24xx -endif - ifdef CONFIG_ARCH_S3C64XX include $(src)/Makefile.s3c64xx endifarch/arm/mach-s3c/Makefile.s3c24xx deleted +0
-0arch/arm/mach-s3c/anubis.h deleted +0
-0arch/arm/mach-s3c/bast-ide.c deleted +0
-0arch/arm/mach-s3c/bast-irq.c deleted +0
-0arch/arm/mach-s3c/bast.h deleted +0
-0arch/arm/mach-s3c/common-smdk-s3c24xx.c deleted +0
-0arch/arm/mach-s3c/common-smdk-s3c24xx.h deleted +0
-0arch/arm/mach-s3c/cpufreq-utils-s3c24xx.c deleted +0
-0arch/arm/mach-s3c/dma-s3c24xx.h deleted +0
-0arch/arm/mach-s3c/fb-core-s3c24xx.h deleted +0
-0arch/arm/mach-s3c/gpio-samsung-s3c24xx.h deleted +0
-0arch/arm/mach-s3c/gta02.h deleted +0
-0arch/arm/mach-s3c/h1940-bluetooth.c deleted +0
-0arch/arm/mach-s3c/h1940.h deleted +0
-0arch/arm/mach-s3c/hardware-s3c24xx.h deleted +0
-0arch/arm/mach-s3c/iotiming-s3c2410.c deleted +0
-0arch/arm/mach-s3c/iotiming-s3c2412.c deleted +0
-0arch/arm/mach-s3c/irq-pm-s3c24xx.c deleted +0
-0arch/arm/mach-s3c/irq-s3c24xx-fiq-exports.c deleted +0
-0arch/arm/mach-s3c/irq-s3c24xx-fiq.S deleted +0
-0arch/arm/mach-s3c/irq-s3c24xx.c deleted +0
-0arch/arm/mach-s3c/irqs-s3c24xx.h deleted +0
-0arch/arm/mach-s3c/mach-amlm5900.c deleted +0
-0arch/arm/mach-s3c/mach-anubis.c deleted +0
-0arch/arm/mach-s3c/mach-at2440evb.c deleted +0
-0arch/arm/mach-s3c/mach-bast.c deleted +0
-0arch/arm/mach-s3c/mach-gta02.c deleted +0
-0arch/arm/mach-s3c/mach-h1940.c deleted +0
-0arch/arm/mach-s3c/mach-jive.c deleted +0
-0arch/arm/mach-s3c/mach-mini2440.c deleted +0
-0arch/arm/mach-s3c/mach-n30.c deleted +0
-0arch/arm/mach-s3c/mach-nexcoder.c deleted +0
-0arch/arm/mach-s3c/mach-osiris-dvs.c deleted +0
-0arch/arm/mach-s3c/mach-osiris.c deleted +0
-0arch/arm/mach-s3c/mach-otom.c deleted +0
-0arch/arm/mach-s3c/mach-qt2410.c deleted +0
-0arch/arm/mach-s3c/mach-rx1950.c deleted +0
-0arch/arm/mach-s3c/mach-rx3715.c deleted +0
-0arch/arm/mach-s3c/mach-s3c2416-dt.c deleted +0
-0arch/arm/mach-s3c/mach-smdk2410.c deleted +0
-0arch/arm/mach-s3c/mach-smdk2413.c deleted +0
-0arch/arm/mach-s3c/mach-smdk2416.c deleted +0
-0arch/arm/mach-s3c/mach-smdk2440.c deleted +0
-0arch/arm/mach-s3c/mach-smdk2443.c deleted +0
-0arch/arm/mach-s3c/mach-tct_hammer.c deleted +0
-0arch/arm/mach-s3c/mach-vr1000.c deleted +0
-0arch/arm/mach-s3c/mach-vstms.c deleted +0
-0arch/arm/mach-s3c/map-s3c24xx.h deleted +0
-0arch/arm/mach-s3c/nand-core-s3c24xx.h deleted +0
-0arch/arm/mach-s3c/osiris.h deleted +0
-0arch/arm/mach-s3c/pll-s3c2410.c deleted +0
-0arch/arm/mach-s3c/pll-s3c2440-12000000.c deleted +0
-0arch/arm/mach-s3c/pll-s3c2440-16934400.c deleted +0
-0arch/arm/mach-s3c/pm-core-s3c24xx.h deleted +0
-0arch/arm/mach-s3c/pm-h1940.S deleted +0
-0arch/arm/mach-s3c/pm-s3c2410.c deleted +0
-0arch/arm/mach-s3c/pm-s3c2412.c deleted +0
-0arch/arm/mach-s3c/pm-s3c2416.c deleted +0
-0arch/arm/mach-s3c/pm-s3c24xx.c deleted +0
-0arch/arm/mach-s3c/regs-clock-s3c24xx.h deleted +0
-0arch/arm/mach-s3c/regs-dsc-s3c24xx.h deleted +0
-0arch/arm/mach-s3c/regs-gpio-s3c24xx.h deleted +0
-0arch/arm/mach-s3c/regs-irq-s3c24xx.h deleted +0
-0arch/arm/mach-s3c/regs-mem-s3c24xx.h deleted +0
-0arch/arm/mach-s3c/regs-s3c2443-clock.h deleted +0
-0arch/arm/mach-s3c/rtc-core-s3c24xx.h deleted +0
-0arch/arm/mach-s3c/s3c2410.c deleted +0
-0arch/arm/mach-s3c/s3c2412-power.h deleted +0
-0arch/arm/mach-s3c/s3c2412.c deleted +0
-0arch/arm/mach-s3c/s3c2412.h deleted +0
-0arch/arm/mach-s3c/s3c2416.c deleted +0
-0arch/arm/mach-s3c/s3c2440.c deleted +0
-0arch/arm/mach-s3c/s3c2442.c deleted +0
-0arch/arm/mach-s3c/s3c2443.c deleted +0
-0arch/arm/mach-s3c/s3c244x.c deleted +0
-0arch/arm/mach-s3c/s3c24xx.c deleted +0
-0arch/arm/mach-s3c/s3c24xx.h deleted +0
-0arch/arm/mach-s3c/setup-i2c-s3c24xx.c deleted +0
-0arch/arm/mach-s3c/setup-sdhci-gpio-s3c24xx.c deleted +0
-0arch/arm/mach-s3c/setup-spi-s3c24xx.c deleted +0
-0arch/arm/mach-s3c/setup-ts-s3c24xx.c deleted +0
-0arch/arm/mach-s3c/simtec-audio.c deleted +0
-0arch/arm/mach-s3c/simtec-nor.c deleted +0
-0arch/arm/mach-s3c/simtec-pm.c deleted +0
-0arch/arm/mach-s3c/simtec-usb.c deleted +0
-0arch/arm/mach-s3c/simtec.h deleted +0
-0arch/arm/mach-s3c/sleep-s3c2410.S deleted +0
-0arch/arm/mach-s3c/sleep-s3c2412.S deleted +0
-0arch/arm/mach-s3c/sleep-s3c24xx.S deleted +0
-0arch/arm/mach-s3c/spi-core-s3c24xx.h deleted +0
-0arch/arm/mach-s3c/vr1000.h deleted +0
-0drivers/soc/samsung/Kconfig +0
-4@@ -85,8 +85,6 @@ config SAMSUNG_PM_CHECK Note, this can take several seconds depending on memory size and CPU speed. - See <file:Documentation/arm/samsung-s3c24xx/suspend.rst> - config SAMSUNG_PM_CHECK_CHUNKSIZE int "S3C2410 PM Suspend CRC Chunksize (KiB)" depends on PM && SAMSUNG_PM_CHECK@@ -97,8 +95,6 @@ config SAMSUNG_PM_CHECK_CHUNKSIZE the CRC data block will take more memory, but will identify any faults with better precision. - See <file:Documentation/arm/samsung-s3c24xx/suspend.rst> - config EXYNOS_REGULATOR_COUPLER bool "Exynos SoC Regulator Coupler" if COMPILE_TEST depends on ARCH_EXYNOS || COMPILE_TESTinclude/dt-bindings/clock/s3c2410.h deleted +0
-0include/dt-bindings/clock/s3c2412.h deleted +0
-0include/dt-bindings/clock/s3c2443.h deleted +0
-0include/linux/amba/pl093.h deleted +0
-0
Arnd Bergmann
maintainerRe: [PATCH 01/21] ARM: s3c: remove all s3c24xx support
Quoted 21 lines · Heiko Stübner
Am Freitag, 21. Oktober 2022, 22:27:34 CEST schrieb Arnd Bergmann:
Quoted 7 lines
From: Arnd Bergmann <[email protected]>
The platform was deprecated in commit
6a5e69c7ddea("ARM: s3c: mark as deprecated and schedule removal") and can be removed. This includes all files that are exclusively for s3c24xx and not shared with s3c64xx, as well as the glue logic inKconfigand the maintainer file entries.Quoted 8 lines
Cc Arnaud Patard <[email protected]>Cc Ben Dooks <[email protected]>Cc Christer Weinigel <[email protected]>Cc Guillaume GOURAT <[email protected]>Cc Heiko Stuebner <[email protected]>Cc Simtec Linux Team <[email protected]>Signed-off-by Arnd Bergmann <[email protected]>So many memories of me starting out in the kernel on s3c24xx. But it's no use trying to keep stuff around that nobody will likely ever use again. So with a sad face
Quoted 5 lines
Acked-by Heiko Stuebner <[email protected]>though you might want to also include
drivers/dma/s3c24xx-dma.c
This was in a separate patch that removes the driver:
https://lore.kernel.org/linux-arm-kernel/[email protected]/
In the first patch, I only include references to removed Kconfig symbols that would not make sense to split out into separate patches.
Arnd
Re: [PATCH 01/21] ARM: s3c: remove all s3c24xx support
Am Montag, 24. Oktober 2022, 16:27:31 CEST schrieb Arnd Bergmann:
Quoted 25 lines · Heiko Stübner
Quoted 24 lines
Am Freitag, 21. Oktober 2022, 22:27:34 CEST schrieb Arnd Bergmann:
Quoted 7 lines
From: Arnd Bergmann <[email protected]>
The platform was deprecated in commit
6a5e69c7ddea("ARM: s3c: mark as deprecated and schedule removal") and can be removed. This includes all files that are exclusively for s3c24xx and not shared with s3c64xx, as well as the glue logic inKconfigand the maintainer file entries.Quoted 8 lines
Cc Arnaud Patard <[email protected]>Cc Ben Dooks <[email protected]>Cc Christer Weinigel <[email protected]>Cc Guillaume GOURAT <[email protected]>Cc Heiko Stuebner <[email protected]>Cc Simtec Linux Team <[email protected]>Signed-off-by Arnd Bergmann <[email protected]>So many memories of me starting out in the kernel on s3c24xx. But it's no use trying to keep stuff around that nobody will likely ever use again. So with a sad face
Acked-by Heiko Stuebner <[email protected]>
Quoted 6 lines
Quoted 2 lines
though you might want to also include
drivers/dma/s3c24xx-dma.cThis was in a separate patch that removes the driver:
ah ok, I guess git-send-email didn't want to send me that patch. So all is good in that part then :-)
Heiko
Re: [PATCH 01/21] ARM: s3c: remove all s3c24xx support
In reply to Arnd BergmannQuoted 15 lines · Arnd Bergmann
From: Arnd Bergmann <[email protected]>
The platform was deprecated in commit
6a5e69c7ddea("ARM: s3c: mark as deprecated and schedule removal") and can be removed. This includes all files that are exclusively for s3c24xx and not shared with s3c64xx, as well as the glue logic inKconfigand the maintainer file entries.Cc Arnaud Patard <[email protected]>Cc Ben Dooks <[email protected]>Cc Christer Weinigel <[email protected]>Cc Guillaume GOURAT <[email protected]>Cc Heiko Stuebner <[email protected]>Cc Simtec Linux Team <[email protected]>Signed-off-by Arnd Bergmann <[email protected]>
Quoted 1 line
---
Best regards,
Krzysztof
Re: [PATCH 01/21] ARM: s3c: remove all s3c24xx support
In reply to Arnd BergmannQuoting Arnd Bergmann (2022-10-21 13:27:34)
Quoted 15 lines
From: Arnd Bergmann <[email protected]>
The platform was deprecated in commit
6a5e69c7ddea("ARM: s3c: mark as deprecated and schedule removal") and can be removed. This includes all files that are exclusively for s3c24xx and not shared with s3c64xx, as well as the glue logic inKconfigand the maintainer file entries.Cc Arnaud Patard <[email protected]>Cc Ben Dooks <[email protected]>Cc Christer Weinigel <[email protected]>Cc Guillaume GOURAT <[email protected]>Cc Heiko Stuebner <[email protected]>Cc Simtec Linux Team <[email protected]>Signed-off-by Arnd Bergmann <[email protected]>
Quoted 1 line
---
PATCH 2/21 ARM: s3c: remove s3c24xx specific hacks
In reply to Arnd BergmannFrom: Arnd Bergmann <[email protected]>
A number of device drivers reference CONFIG_ARM_S3C24XX_CPUFREQ or similar symbols that are no longer available with the platform gone, though the drivers themselves are still used on newer platforms, so remove these hacks.
--- arch/arm/include/debug/s3c24xx.S | 10 - arch/arm/mach-s3c/Makefile | 2 - arch/arm/mach-s3c/devs.c | 1 - arch/arm/mach-s3c/dma.h | 7 - arch/arm/mach-s3c/gpio-samsung.h | 7 - arch/arm/mach-s3c/irqs.h | 7 - arch/arm/mach-s3c/map.h | 7 - arch/arm/mach-s3c/pm-core.h | 7 - arch/arm/mach-s3c/regs-clock.h | 7 - arch/arm/mach-s3c/regs-gpio.h | 7 - arch/arm/mach-s3c/regs-irq.h | 7 - drivers/clocksource/Kconfig | 2 +- drivers/i2c/busses/Kconfig | 3 +- drivers/i2c/busses/i2c-s3c2410.c | 72 ------- drivers/iio/adc/Kconfig | 6 +- .../media/platform/samsung/s3c-camif/Kconfig | 8 +- drivers/mmc/host/Kconfig | 5 +- drivers/mtd/nand/raw/Kconfig | 2 +- drivers/mtd/nand/raw/s3c2410.c | 60 ------ drivers/pinctrl/samsung/pinctrl-samsung.c | 10 - drivers/rtc/Kconfig | 8 +- drivers/tty/serial/Kconfig | 8 +- drivers/tty/serial/samsung_tty.c | 199 ------------------ drivers/usb/host/Kconfig | 8 +- drivers/watchdog/Kconfig | 9 +- drivers/watchdog/s3c2410_wdt.c | 84 +------- include/linux/clk/samsung.h | 32 --- include/linux/soc/samsung/s3c-pm.h | 58 ----- 28 files changed, 29 insertions(+), 614 deletions(-)
arch/arm/include/debug/s3c24xx.S +0 -10
@@ -28,16 +28,6 @@ and \rd, \rd, #S3C2410_UFSTAT_TXMASK .endm -/* Select the correct implementation depending on the configuration. The - * S3C2440 will get selected by default, as these are the most widely - * used variants of these -*/ - -#if defined(CONFIG_DEBUG_S3C2410_UART) -#define fifo_full fifo_full_s3c2410 -#define fifo_level fifo_level_s3c2410 -#endif - /* include the reset of the code which will do the work */ #include <debug/samsung.S>
arch/arm/mach-s3c/Makefile +0 -2
@@ -2,9 +2,7 @@ # # Copyright 2009 Simtec Electronics -ifdef CONFIG_ARCH_S3C64XX include $(src)/Makefile.s3c64xx -endif # Objects we always build independent of SoC choice
arch/arm/mach-s3c/devs.c +0 -1
@@ -29,7 +29,6 @@#include <linux/sizes.h> #include <linux/platform_data/s3c-hsudc.h> #include <linux/platform_data/s3c-hsotg.h> -#include <linux/platform_data/dma-s3c24xx.h> #include <linux/platform_data/media/s5p_hdmi.h>
arch/arm/mach-s3c/dma.h +0 -7
@@ -1,9 +1,2 @@/* SPDX-License-Identifier: GPL-2.0 */ - -#ifdef CONFIG_ARCH_S3C24XX -#include "dma-s3c24xx.h" -#endif - -#ifdef CONFIG_ARCH_S3C64XX #include "dma-s3c64xx.h" -#endif
arch/arm/mach-s3c/gpio-samsung.h +0 -7
@@ -1,9 +1,2 @@/* SPDX-License-Identifier: GPL-2.0 */ - -#ifdef CONFIG_ARCH_S3C24XX -#include "gpio-samsung-s3c24xx.h" -#endif - -#ifdef CONFIG_ARCH_S3C64XX #include "gpio-samsung-s3c64xx.h" -#endif
arch/arm/mach-s3c/irqs.h +0 -7
@@ -1,9 +1,2 @@/* SPDX-License-Identifier: GPL-2.0 */ - -#ifdef CONFIG_ARCH_S3C24XX -#include "irqs-s3c24xx.h" -#endif - -#ifdef CONFIG_ARCH_S3C64XX #include "irqs-s3c64xx.h" -#endif
arch/arm/mach-s3c/map.h +0 -7
@@ -1,9 +1,2 @@/* SPDX-License-Identifier: GPL-2.0 */ - -#ifdef CONFIG_ARCH_S3C24XX -#include "map-s3c24xx.h" -#endif - -#ifdef CONFIG_ARCH_S3C64XX #include "map-s3c64xx.h" -#endif
arch/arm/mach-s3c/pm-core.h +0 -7
@@ -1,9 +1,2 @@/* SPDX-License-Identifier: GPL-2.0 */ - -#ifdef CONFIG_ARCH_S3C24XX -#include "pm-core-s3c24xx.h" -#endif - -#ifdef CONFIG_ARCH_S3C64XX #include "pm-core-s3c64xx.h" -#endif
arch/arm/mach-s3c/regs-clock.h +0 -7
@@ -1,9 +1,2 @@/* SPDX-License-Identifier: GPL-2.0 */ - -#ifdef CONFIG_ARCH_S3C24XX -#include "regs-clock-s3c24xx.h" -#endif - -#ifdef CONFIG_ARCH_S3C64XX #include "regs-clock-s3c64xx.h" -#endif
arch/arm/mach-s3c/regs-gpio.h +0 -7
@@ -1,9 +1,2 @@/* SPDX-License-Identifier: GPL-2.0 */ - -#ifdef CONFIG_ARCH_S3C24XX -#include "regs-gpio-s3c24xx.h" -#endif - -#ifdef CONFIG_ARCH_S3C64XX #include "regs-gpio-s3c64xx.h" -#endif
arch/arm/mach-s3c/regs-irq.h +0 -7
@@ -1,9 +1,2 @@/* SPDX-License-Identifier: GPL-2.0 */ - -#ifdef CONFIG_ARCH_S3C24XX -#include "regs-irq-s3c24xx.h" -#endif - -#ifdef CONFIG_ARCH_S3C64XX #include "regs-irq-s3c64xx.h" -#endif
drivers/clocksource/Kconfig +1 -1
@@ -441,7 +441,7 @@ config CLKSRC_EXYNOS_MCT config CLKSRC_SAMSUNG_PWM bool "PWM timer driver for Samsung S3C, S5P" if COMPILE_TEST depends on HAS_IOMEM - depends on ARCH_EXYNOS || ARCH_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210 || COMPILE_TEST + depends on ARCH_EXYNOS || ARCH_S3C64XX || ARCH_S5PV210 || COMPILE_TEST help This is a new clocksource driver for the PWM timer found in Samsung S3C, S5P and Exynos SoCs, replacing an earlier driver
drivers/i2c/busses/Kconfig +1 -2
@@ -1009,8 +1009,7 @@ config I2C_RZV2M config I2C_S3C2410 tristate "S3C/Exynos I2C Driver" - depends on ARCH_EXYNOS || ARCH_S3C24XX || ARCH_S3C64XX || \ - ARCH_S5PV210 || COMPILE_TEST + depends on ARCH_EXYNOS || ARCH_S3C64XX || ARCH_S5PV210 || COMPILE_TEST help Say Y here to include support for I2C controller in the Samsung SoCs (S3C, S5Pv210, Exynos).
drivers/i2c/busses/i2c-s3c2410.c +0 -72
102 lines not on this page · raw message
drivers/iio/adc/Kconfig +3 -3
@@ -437,11 +437,11 @@ config EP93XX_ADC config EXYNOS_ADC tristate "Exynos ADC driver support" - depends on ARCH_EXYNOS || ARCH_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210 || (OF && COMPILE_TEST) + depends on ARCH_EXYNOS || ARCH_S3C64XX || ARCH_S5PV210 || (OF && COMPILE_TEST) depends on HAS_IOMEM help - Driver for the ADC block found in the Samsung S3C (S3C2410, S3C2416, - S3C2440, S3C2443, S3C6410), S5Pv210 and Exynos SoCs. + Driver for the ADC block found in the Samsung S3C6410, S5Pv210 and + Exynos SoCs. Choose Y here only if you build for such Samsung SoC. To compile this driver as a module, choose M here: the module will be
drivers/media/platform/samsung/s3c-camif/Kconfig +4 -4
@@ -1,15 +1,15 @@ # SPDX-License-Identifier: GPL-2.0-only config VIDEO_S3C_CAMIF - tristate "Samsung S3C24XX/S3C64XX SoC Camera Interface driver" + tristate "Samsung 3C64XX SoC Camera Interface driver" depends on V4L_PLATFORM_DRIVERS depends on VIDEO_DEV && I2C && PM - depends on ARCH_S3C64XX || PLAT_S3C24XX || COMPILE_TEST + depends on ARCH_S3C64XX || COMPILE_TEST select MEDIA_CONTROLLER select VIDEO_V4L2_SUBDEV_API select VIDEOBUF2_DMA_CONTIG help - This is a v4l2 driver for s3c24xx and s3c64xx SoC series camera - host interface (CAMIF). + This is a v4l2 driver for s3c64xx SoC series camera host interface + (CAMIF). To compile this driver as a module, choose M here: the module will be called s3c-camif.
drivers/mmc/host/Kconfig +2 -3
@@ -312,9 +312,8 @@ config MMC_SDHCI_S3C depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST help This selects the Secure Digital Host Controller Interface (SDHCI) - often referrered to as the HSMMC block in some of the Samsung S3C - (S3C2416, S3C2443, S3C6410), S5Pv210 and Exynos (Exynso4210, - Exynos4412) SoCs. + often referrered to as the HSMMC block in some of the Samsung + S3C6410, S5Pv210 and Exynos (Exynso4210, Exynos4412) SoCs. If you have a controller with this interface (thereforeyou build for such Samsung SoC), say Y or M here.
drivers/mtd/nand/raw/Kconfig +1 -1
@@ -79,7 +79,7 @@ config MTD_NAND_NDFC config MTD_NAND_S3C2410 tristate "Samsung S3C NAND controller" - depends on ARCH_S3C24XX || ARCH_S3C64XX + depends on ARCH_S3C64XX help This enables the NAND flash controller on the S3C24xx and S3C64xx SoCs
drivers/mtd/nand/raw/s3c2410.c +0 -60
84 lines not on this page · raw message
drivers/pinctrl/samsung/pinctrl-samsung.c +0 -10
@@ -1322,16 +1322,6 @@ static const struct of_device_id samsung_pinctrl_dt_match[] = {#ifdef CONFIG_PINCTRL_S3C64XX { .compatible = "samsung,s3c64xx-pinctrl", .data = &s3c64xx_of_data }, -#endif -#ifdef CONFIG_PINCTRL_S3C24XX - { .compatible = "samsung,s3c2412-pinctrl", - .data = &s3c2412_of_data }, - { .compatible = "samsung,s3c2416-pinctrl", - .data = &s3c2416_of_data }, - { .compatible = "samsung,s3c2440-pinctrl", - .data = &s3c2440_of_data }, - { .compatible = "samsung,s3c2450-pinctrl", - .data = &s3c2450_of_data },#endif {}, };
drivers/rtc/Kconfig +2 -6
@@ -1406,18 +1406,14 @@ config RTC_DRV_OMAP config RTC_DRV_S3C tristate "Samsung S3C series SoC RTC" - depends on ARCH_EXYNOS || ARCH_S3C64XX || ARCH_S3C24XX || ARCH_S5PV210 || \ + depends on ARCH_EXYNOS || ARCH_S3C64XX || ARCH_S5PV210 || \ COMPILE_TEST help RTC (Realtime Clock) driver for the clock inbuilt into the - Samsung S3C24XX series of SoCs. This can provide periodic + Samsung S3C64XX series of SoCs. This can provide periodic interrupt rates from 1Hz to 64Hz for user programs, and wakeup from Alarm. - The driver currently supports the common features on all the - S3C24XX range, such as the S3C2410, S3C2412, S3C2413, S3C2440 - and S3C2442. - This driver can also be build as a module. If so, the module will be called rtc-s3c.
drivers/tty/serial/Kconfig +4 -4
@@ -242,23 +242,23 @@ config SERIAL_SAMSUNG select SERIAL_CORE help Support for the on-chip UARTs on the Samsung - S3C24xx/S3C64xx/S5Pv210/Exynos and Apple M1 SoCs, providing + S3C64xx/S5Pv210/Exynos and Apple M1 SoCs, providing /dev/ttySAC0, 1 and 2 (note, some machines may not provide all of these ports, depending on how the serial port pins are configured. + Choose Y/M here only if you build for such SoC. config SERIAL_SAMSUNG_UARTS_4 bool depends on SERIAL_SAMSUNG - default y if !(CPU_S3C2410 || CPU_S3C2412 || CPU_S3C2440 || CPU_S3C2442) + default y help Internal node for the common case of 4 Samsung compatible UARTs config SERIAL_SAMSUNG_UARTS int depends on SERIAL_SAMSUNG - default 4 if SERIAL_SAMSUNG_UARTS_4 || CPU_S3C2416 - default 3 + default 4 help Select the number of available UART ports for the Samsung S3C serial driver
drivers/tty/serial/samsung_tty.c +0 -199
241 lines not on this page · raw message
drivers/usb/host/Kconfig +4 -4
@@ -443,12 +443,12 @@ config USB_OHCI_HCD_STI STMicroelectronics consumer electronics SoC's. config USB_OHCI_HCD_S3C2410 - tristate "OHCI support for Samsung S3C24xx/S3C64xx SoC series" - depends on USB_OHCI_HCD && (ARCH_S3C24XX || ARCH_S3C64XX || COMPILE_TEST) - default y if (ARCH_S3C24XX || ARCH_S3C64XX) + tristate "OHCI support for Samsung S3C64xx SoC series" + depends on USB_OHCI_HCD && (ARCH_S3C64XX || COMPILE_TEST) + default ARCH_S3C64XX help Enables support for the on-chip OHCI controller on - S3C24xx/S3C64xx chips. + S3C64xx chips. config USB_OHCI_HCD_LPC32XX tristate "Support for LPC on-chip OHCI USB controller"
drivers/watchdog/Kconfig +4 -5
@@ -491,14 +491,13 @@ config IXP4XX_WATCHDOG Say N if you are unsure. config S3C2410_WATCHDOG - tristate "S3C2410 Watchdog" - depends on ARCH_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210 || ARCH_EXYNOS || \ - COMPILE_TEST + tristate "S3C6410/S5Pv210/Exynos Watchdog" + depends on ARCH_S3C64XX || ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST select WATCHDOG_CORE select MFD_SYSCON if ARCH_EXYNOS help - Watchdog timer block in the Samsung S3C24xx, S3C64xx, S5Pv210 and - Exynos SoCs. This will reboot the system when the timer expires with + Watchdog timer block in the Samsung S3C64xx, S5Pv210 and Exynos + SoCs. This will reboot the system when the timer expires with the watchdog enabled. The driver is limited by the speed of the system's PCLK
drivers/watchdog/s3c2410_wdt.c +3 -81
126 lines not on this page · raw message
include/linux/clk/samsung.h +0 -32
@@ -21,36 +21,4 @@ static inline void s3c64xx_clk_init(struct device_node *np, bool s3c6400, void __iomem *base) { }#endif /* CONFIG_S3C64XX_COMMON_CLK */ -#ifdef CONFIG_S3C2410_COMMON_CLK -void s3c2410_common_clk_init (struct device_node *np,unsigned long xti_f, -int current_soc, -void __iomem *reg_base); -#else -static inline void s3c2410_common_clk_init (struct device_node *np, -unsigned long xti_f, -int current_soc, -void __iomem *reg_base) { } -#endif /* CONFIG_S3C2410_COMMON_CLK */ - -#ifdef CONFIG_S3C2412_COMMON_CLK -void s3c2412_common_clk_init (struct device_node *np,unsigned long xti_f, -unsigned long ext_f,void __iomem *reg_base); -#else -static inline void s3c2412_common_clk_init (struct device_node *np, -unsigned long xti_f, -unsigned long ext_f, -void __iomem *reg_base) { } -#endif /* CONFIG_S3C2412_COMMON_CLK */ - -#ifdef CONFIG_S3C2443_COMMON_CLK -void s3c2443_common_clk_init (struct device_node *np,unsigned long xti_f, -int current_soc, -void __iomem *reg_base); -#else -static inline void s3c2443_common_clk_init (struct device_node *np, -unsigned long xti_f, -int current_soc, -void __iomem *reg_base) { } -#endif /* CONFIG_S3C2443_COMMON_CLK */ -#endif /* __LINUX_CLK_SAMSUNG_H_ */
include/linux/soc/samsung/s3c-pm.h +0 -58
72 lines not on this page · raw message
Signature · 6 lines
2.29.2 ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/
Re: [PATCH 02/21] ARM: s3c: remove s3c24xx specific hacks
Quoted 8 lines · Arnd Bergmann
From: Arnd Bergmann <[email protected]>
A number of device drivers reference
CONFIG_ARM_S3C24XX_CPUFREQor similar symbols that are no longer available with the platform gone, though the drivers themselves are still used on newer platforms, so remove these hacks.Signed-off-by Arnd Bergmann <[email protected]>
Re: [PATCH 02/21] ARM: s3c: remove s3c24xx specific hacks
In reply to Arnd BergmannQuoted 8 lines · Arnd Bergmann
From: Arnd Bergmann <[email protected]>
A number of device drivers reference
CONFIG_ARM_S3C24XX_CPUFREQor similar symbols that are no longer available with the platform gone, though the drivers themselves are still used on newer platforms, so remove these hacks.Signed-off-by Arnd Bergmann <[email protected]>
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
Re: [PATCH 02/21] ARM: s3c: remove s3c24xx specific hacks
In reply to Arnd BergmannQuoted 8 lines · Arnd Bergmann
From: Arnd Bergmann <[email protected]>
A number of device drivers reference
CONFIG_ARM_S3C24XX_CPUFREQor similar symbols that are no longer available with the platform gone, though the drivers themselves are still used on newer platforms, so remove these hacks.Signed-off-by Arnd Bergmann <[email protected]>
Yours,
Linus Walleij
Re: [PATCH 02/21] ARM: s3c: remove s3c24xx specific hacks
In reply to Arnd BergmannQuoted 8 lines · On Fri, 21 Oct 2022 22:27:35 +0200 Arnd Bergmann <[email protected]> wrote:
From: Arnd Bergmann <[email protected]>
A number of device drivers reference
CONFIG_ARM_S3C24XX_CPUFREQor similar symbols that are no longer available with the platform gone, though the drivers themselves are still used on newer platforms, so remove these hacks.Signed-off-by Arnd Bergmann <[email protected]>
For the IIO Kconfig change
Quoted 1,122 lines
--- arch/arm/include/debug/s3c24xx.S | 10 - arch/arm/mach-s3c/Makefile | 2 - arch/arm/mach-s3c/devs.c | 1 - arch/arm/mach-s3c/dma.h | 7 - arch/arm/mach-s3c/gpio-samsung.h | 7 - arch/arm/mach-s3c/irqs.h | 7 - arch/arm/mach-s3c/map.h | 7 - arch/arm/mach-s3c/pm-core.h | 7 - arch/arm/mach-s3c/regs-clock.h | 7 - arch/arm/mach-s3c/regs-gpio.h | 7 - arch/arm/mach-s3c/regs-irq.h | 7 - drivers/clocksource/Kconfig | 2 +- drivers/i2c/busses/Kconfig | 3 +- drivers/i2c/busses/i2c-s3c2410.c | 72 ------- drivers/iio/adc/Kconfig | 6 +- .../media/platform/samsung/s3c-camif/Kconfig | 8 +- drivers/mmc/host/Kconfig | 5 +- drivers/mtd/nand/raw/Kconfig | 2 +- drivers/mtd/nand/raw/s3c2410.c | 60 ------ drivers/pinctrl/samsung/pinctrl-samsung.c | 10 - drivers/rtc/Kconfig | 8 +- drivers/tty/serial/Kconfig | 8 +- drivers/tty/serial/samsung_tty.c | 199 ------------------ drivers/usb/host/Kconfig | 8 +- drivers/watchdog/Kconfig | 9 +- drivers/watchdog/s3c2410_wdt.c | 84 +------- include/linux/clk/samsung.h | 32 --- include/linux/soc/samsung/s3c-pm.h | 58 ----- 28 files changed, 29 insertions(+), 614 deletions(-)arch/arm/include/debug/s3c24xx.S +0
-10@@ -28,16 +28,6 @@ and \rd, \rd, #S3C2410_UFSTAT_TXMASK .endm -/* Select the correct implementation depending on the configuration. The - * S3C2440 will get selected by default, as these are the most widely - * used variants of these -*/ - -#if defined(CONFIG_DEBUG_S3C2410_UART) -#define fifo_full fifo_full_s3c2410 -#define fifo_level fifo_level_s3c2410 -#endif - /* include the reset of the code which will do the work */ #include <debug/samsung.S>arch/arm/mach-s3c/Makefile +0
-2@@ -2,9 +2,7 @@ # # Copyright 2009 Simtec Electronics -ifdef CONFIG_ARCH_S3C64XX include $(src)/Makefile.s3c64xx -endif # Objects we always build independent of SoC choicearch/arm/mach-s3c/devs.c +0
-1@@ -29,7 +29,6 @@#include <linux/sizes.h> #include <linux/platform_data/s3c-hsudc.h> #include <linux/platform_data/s3c-hsotg.h> -#include <linux/platform_data/dma-s3c24xx.h> #include <linux/platform_data/media/s5p_hdmi.h> arch/arm/mach-s3c/dma.h +0
-7@@ -1,9 +1,2 @@/* SPDX-License-Identifier: GPL-2.0 */ - -#ifdef CONFIG_ARCH_S3C24XX -#include "dma-s3c24xx.h" -#endif - -#ifdef CONFIG_ARCH_S3C64XX #include "dma-s3c64xx.h" -#endif arch/arm/mach-s3c/gpio-samsung.h +0
-7@@ -1,9 +1,2 @@/* SPDX-License-Identifier: GPL-2.0 */ - -#ifdef CONFIG_ARCH_S3C24XX -#include "gpio-samsung-s3c24xx.h" -#endif - -#ifdef CONFIG_ARCH_S3C64XX #include "gpio-samsung-s3c64xx.h" -#endif arch/arm/mach-s3c/irqs.h +0
-7@@ -1,9 +1,2 @@/* SPDX-License-Identifier: GPL-2.0 */ - -#ifdef CONFIG_ARCH_S3C24XX -#include "irqs-s3c24xx.h" -#endif - -#ifdef CONFIG_ARCH_S3C64XX #include "irqs-s3c64xx.h" -#endif arch/arm/mach-s3c/map.h +0
-7@@ -1,9 +1,2 @@/* SPDX-License-Identifier: GPL-2.0 */ - -#ifdef CONFIG_ARCH_S3C24XX -#include "map-s3c24xx.h" -#endif - -#ifdef CONFIG_ARCH_S3C64XX #include "map-s3c64xx.h" -#endif arch/arm/mach-s3c/pm-core.h +0
-7@@ -1,9 +1,2 @@/* SPDX-License-Identifier: GPL-2.0 */ - -#ifdef CONFIG_ARCH_S3C24XX -#include "pm-core-s3c24xx.h" -#endif - -#ifdef CONFIG_ARCH_S3C64XX #include "pm-core-s3c64xx.h" -#endif arch/arm/mach-s3c/regs-clock.h +0
-7@@ -1,9 +1,2 @@/* SPDX-License-Identifier: GPL-2.0 */ - -#ifdef CONFIG_ARCH_S3C24XX -#include "regs-clock-s3c24xx.h" -#endif - -#ifdef CONFIG_ARCH_S3C64XX #include "regs-clock-s3c64xx.h" -#endif arch/arm/mach-s3c/regs-gpio.h +0
-7@@ -1,9 +1,2 @@/* SPDX-License-Identifier: GPL-2.0 */ - -#ifdef CONFIG_ARCH_S3C24XX -#include "regs-gpio-s3c24xx.h" -#endif - -#ifdef CONFIG_ARCH_S3C64XX #include "regs-gpio-s3c64xx.h" -#endif arch/arm/mach-s3c/regs-irq.h +0
-7@@ -1,9 +1,2 @@/* SPDX-License-Identifier: GPL-2.0 */ - -#ifdef CONFIG_ARCH_S3C24XX -#include "regs-irq-s3c24xx.h" -#endif - -#ifdef CONFIG_ARCH_S3C64XX #include "regs-irq-s3c64xx.h" -#endif drivers/clocksource/Kconfig +1
-1@@ -441,7 +441,7 @@ config CLKSRC_EXYNOS_MCT config CLKSRC_SAMSUNG_PWM bool "PWM timer driver for Samsung S3C, S5P" if COMPILE_TEST depends on HAS_IOMEM - depends on ARCH_EXYNOS || ARCH_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210 || COMPILE_TEST + depends on ARCH_EXYNOS || ARCH_S3C64XX || ARCH_S5PV210 || COMPILE_TEST help This is a new clocksource driver for the PWM timer found in Samsung S3C, S5P and Exynos SoCs, replacing an earlier driverdrivers/i2c/busses/Kconfig +1
-2@@ -1009,8 +1009,7 @@ config I2C_RZV2M config I2C_S3C2410 tristate "S3C/Exynos I2C Driver" - depends on ARCH_EXYNOS || ARCH_S3C24XX || ARCH_S3C64XX || \ - ARCH_S5PV210 || COMPILE_TEST + depends on ARCH_EXYNOS || ARCH_S3C64XX || ARCH_S5PV210 || COMPILE_TEST help Say Y here to include support for I2C controller in the Samsung SoCs (S3C, S5Pv210, Exynos).drivers/i2c/busses/i2c-s3c2410.c +0
-72@@ -116,9 +116,6 @@ struct s3c24xx_i2c {struct s3c2410_platform_i2c *pdata;struct gpio_desc *gpios[2 ];struct pinctrl *pctrl; -#if defined(CONFIG_ARM_S3C24XX_CPUFREQ ) -struct notifier_block freq_transition; -#endif struct regmap *sysreg;unsigned int sys_i2c_cfg; };@@ -885,65 +882,6 @@ static int s3c24xx_i2c_clockrate(struct s3c24xx_i2c *i2c, unsigned int *got)return 0 ; } -#if defined(CONFIG_ARM_S3C24XX_CPUFREQ ) - -#define freq_to_i2c (_n) container_of(_n, struct s3c24xx_i2c, freq_transition) - -static int s3c24xx_i2c_cpufreq_transition (struct notifier_block *nb, -unsigned long val,void *data) -{ -struct s3c24xx_i2c *i2c =freq_to_i2c (nb); -unsigned int got; -int delta_f; -int ret; - - delta_f =clk_get_rate (i2c->clk) - i2c->clkrate; - -/* if we're post-change and the input clock has slowed down -* or at pre-change and the clock is about to speed up, then -* adjust our clock rate. <0 is slow, >0 speedup. -*/ - -if ((val ==CPUFREQ_POSTCHANGE && delta_f <0 ) || - (val ==CPUFREQ_PRECHANGE && delta_f >0 )) { -i2c_lock_bus (&i2c->adap,I2C_LOCK_ROOT_ADAPTER ); - ret =s3c24xx_i2c_clockrate (i2c, &got); -i2c_unlock_bus (&i2c->adap,I2C_LOCK_ROOT_ADAPTER ); - -if (ret <0 ) -dev_err (i2c->dev,"cannot find frequency (%d)\n" , ret); -else -dev_info (i2c->dev,"setting freq %d\n" , got); - } - -return 0 ; -} - -static inline int s3c24xx_i2c_register_cpufreq (struct s3c24xx_i2c *i2c) -{ - i2c->freq_transition.notifier_call = s3c24xx_i2c_cpufreq_transition; - -return cpufreq_register_notifier (&i2c->freq_transition, -CPUFREQ_TRANSITION_NOTIFIER ); -} - -static inline void s3c24xx_i2c_deregister_cpufreq (struct s3c24xx_i2c *i2c) -{ -cpufreq_unregister_notifier (&i2c->freq_transition, -CPUFREQ_TRANSITION_NOTIFIER ); -} - -#else -static inline int s3c24xx_i2c_register_cpufreq (struct s3c24xx_i2c *i2c) -{ -return 0 ; -} - -static inline void s3c24xx_i2c_deregister_cpufreq (struct s3c24xx_i2c *i2c) -{ -} -#endif -#ifdef CONFIG_OF static int s3c24xx_i2c_parse_dt_gpio (struct s3c24xx_i2c *i2c) {@@ -1152,13 +1090,6 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev) } } - ret =s3c24xx_i2c_register_cpufreq (i2c); -if (ret <0 ) { -dev_err (&pdev->dev,"failed to register cpufreq notifier\n" ); -clk_unprepare (i2c->clk); -return ret; - } -/* * Note, previous versions of the driver used i2c_add_adapter() * to add the bus at any number. We now pass the bus number via @@ -1175,7 +1106,6 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev) ret =i2c_add_numbered_adapter (&i2c->adap);if (ret <0 ) {pm_runtime_disable (&pdev->dev); -s3c24xx_i2c_deregister_cpufreq (i2c);clk_unprepare (i2c->clk);return ret; }@@ -1192,8 +1122,6 @@ static int s3c24xx_i2c_remove(struct platform_device *pdev)pm_runtime_disable (&pdev->dev); -s3c24xx_i2c_deregister_cpufreq (i2c); -i2c_del_adapter (&i2c->adap);return 0 ;drivers/iio/adc/Kconfig +3
-3@@ -437,11 +437,11 @@ config EP93XX_ADC config EXYNOS_ADC tristate "Exynos ADC driver support" - depends on ARCH_EXYNOS || ARCH_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210 || (OF && COMPILE_TEST) + depends on ARCH_EXYNOS || ARCH_S3C64XX || ARCH_S5PV210 || (OF && COMPILE_TEST) depends on HAS_IOMEM help - Driver for the ADC block found in the Samsung S3C (S3C2410, S3C2416, - S3C2440, S3C2443, S3C6410), S5Pv210 and Exynos SoCs. + Driver for the ADC block found in the Samsung S3C6410, S5Pv210 and + Exynos SoCs. Choose Y here only if you build for such Samsung SoC. To compile this driver as a module, choose M here: the module will bedrivers/media/platform/samsung/s3c-camif/Kconfig +4
-4@@ -1,15 +1,15 @@ # SPDX-License-Identifier: GPL-2.0-only config VIDEO_S3C_CAMIF - tristate "Samsung S3C24XX/S3C64XX SoC Camera Interface driver" + tristate "Samsung 3C64XX SoC Camera Interface driver" depends on V4L_PLATFORM_DRIVERS depends on VIDEO_DEV && I2C && PM - depends on ARCH_S3C64XX || PLAT_S3C24XX || COMPILE_TEST + depends on ARCH_S3C64XX || COMPILE_TEST select MEDIA_CONTROLLER select VIDEO_V4L2_SUBDEV_API select VIDEOBUF2_DMA_CONTIG help - This is a v4l2 driver for s3c24xx and s3c64xx SoC series camera - host interface (CAMIF). + This is a v4l2 driver for s3c64xx SoC series camera host interface + (CAMIF). To compile this driver as a module, choose M here: the module will be called s3c-camif.drivers/mmc/host/Kconfig +2
-3@@ -312,9 +312,8 @@ config MMC_SDHCI_S3C depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST help This selects the Secure Digital Host Controller Interface (SDHCI) - often referrered to as the HSMMC block in some of the Samsung S3C - (S3C2416, S3C2443, S3C6410), S5Pv210 and Exynos (Exynso4210, - Exynos4412) SoCs. + often referrered to as the HSMMC block in some of the Samsung + S3C6410, S5Pv210 and Exynos (Exynso4210, Exynos4412) SoCs. If you have a controller with this interface (thereforeyou build for such Samsung SoC), say Y or M here.drivers/mtd/nand/raw/Kconfig +1
-1@@ -79,7 +79,7 @@ config MTD_NAND_NDFC config MTD_NAND_S3C2410 tristate "Samsung S3C NAND controller" - depends on ARCH_S3C24XX || ARCH_S3C64XX + depends on ARCH_S3C64XX help This enables the NAND flash controller on the S3C24xx and S3C64xx SoCsdrivers/mtd/nand/raw/s3c2410.c +0
-60@@ -166,10 +166,6 @@ struct s3c2410_nand_info {enum s3c_nand_clk_state clk_state;enum s3c_cpu_type cpu_type; - -#ifdef CONFIG_ARM_S3C24XX_CPUFREQ -struct notifier_block freq_transition; -#endif };struct s3c24XX_nand_devtype_data {@@ -711,54 +707,6 @@ static void s3c2440_nand_write_buf(struct nand_chip *this, const u_char *buf, } } -/* cpufreq driver support */ - -#ifdef CONFIG_ARM_S3C24XX_CPUFREQ - -static int s3c2410_nand_cpufreq_transition (struct notifier_block *nb, -unsigned long val,void *data) -{ -struct s3c2410_nand_info *info; -unsigned long newclk; - - info = container_of(nb, struct s3c2410_nand_info, freq_transition); - newclk =clk_get_rate (info->clk); - -if ((val ==CPUFREQ_POSTCHANGE && newclk < info->clk_rate) || - (val ==CPUFREQ_PRECHANGE && newclk > info->clk_rate)) { -s3c2410_nand_setrate (info); - } - -return 0 ; -} - -static inline int s3c2410_nand_cpufreq_register (struct s3c2410_nand_info *info) -{ - info->freq_transition.notifier_call = s3c2410_nand_cpufreq_transition; - -return cpufreq_register_notifier (&info->freq_transition, -CPUFREQ_TRANSITION_NOTIFIER ); -} - -static inline void -s3c2410_nand_cpufreq_deregister (struct s3c2410_nand_info *info) -{ -cpufreq_unregister_notifier (&info->freq_transition, -CPUFREQ_TRANSITION_NOTIFIER ); -} - -#else -static inline int s3c2410_nand_cpufreq_register (struct s3c2410_nand_info *info) -{ -return 0 ; -} - -static inline void -s3c2410_nand_cpufreq_deregister (struct s3c2410_nand_info *info) -{ -} -#endif -/* device management functions */ static int s3c24xx_nand_remove (struct platform_device *pdev)@@ -768,8 +716,6 @@ static int s3c24xx_nand_remove(struct platform_device *pdev)if (info ==NULL )return 0 ; -s3c2410_nand_cpufreq_deregister (info); -/* Release all our mtds and their partitions, then go through * freeing the resources used */ @@ -1184,12 +1130,6 @@ static int s3c24xx_nand_probe(struct platform_device *pdev)if (err !=0 ) goto exit_error; - err =s3c2410_nand_cpufreq_register (info); -if (err <0 ) { -dev_err (&pdev->dev,"failed to init cpufreq support\n" ); - goto exit_error; - } -if (allow_clk_suspend (info)) {dev_info (&pdev->dev,"clock idle support enabled\n" );s3c2410_nand_clk_set_state (info,CLOCK_SUSPEND );drivers/pinctrl/samsung/pinctrl-samsung.c +0
-10@@ -1322,16 +1322,6 @@ static const struct of_device_id samsung_pinctrl_dt_match[] = {#ifdef CONFIG_PINCTRL_S3C64XX { .compatible = "samsung,s3c64xx-pinctrl", .data = &s3c64xx_of_data }, -#endif -#ifdef CONFIG_PINCTRL_S3C24XX - { .compatible = "samsung,s3c2412-pinctrl", - .data = &s3c2412_of_data }, - { .compatible = "samsung,s3c2416-pinctrl", - .data = &s3c2416_of_data }, - { .compatible = "samsung,s3c2440-pinctrl", - .data = &s3c2440_of_data }, - { .compatible = "samsung,s3c2450-pinctrl", - .data = &s3c2450_of_data },#endif {}, };drivers/rtc/Kconfig +2
-6@@ -1406,18 +1406,14 @@ config RTC_DRV_OMAP config RTC_DRV_S3C tristate "Samsung S3C series SoC RTC" - depends on ARCH_EXYNOS || ARCH_S3C64XX || ARCH_S3C24XX || ARCH_S5PV210 || \ + depends on ARCH_EXYNOS || ARCH_S3C64XX || ARCH_S5PV210 || \ COMPILE_TEST help RTC (Realtime Clock) driver for the clock inbuilt into the - Samsung S3C24XX series of SoCs. This can provide periodic + Samsung S3C64XX series of SoCs. This can provide periodic interrupt rates from 1Hz to 64Hz for user programs, and wakeup from Alarm. - The driver currently supports the common features on all the - S3C24XX range, such as the S3C2410, S3C2412, S3C2413, S3C2440 - and S3C2442. - This driver can also be build as a module. If so, the module will be called rtc-s3c.drivers/tty/serial/Kconfig +4
-4@@ -242,23 +242,23 @@ config SERIAL_SAMSUNG select SERIAL_CORE help Support for the on-chip UARTs on the Samsung - S3C24xx/S3C64xx/S5Pv210/Exynos and Apple M1 SoCs, providing + S3C64xx/S5Pv210/Exynos and Apple M1 SoCs, providing /dev/ttySAC0, 1 and 2 (note, some machines may not provide all of these ports, depending on how the serial port pins are configured. + Choose Y/M here only if you build for such SoC. config SERIAL_SAMSUNG_UARTS_4 bool depends on SERIAL_SAMSUNG - default y if !(CPU_S3C2410 || CPU_S3C2412 || CPU_S3C2440 || CPU_S3C2442) + default y help Internal node for the common case of 4 Samsung compatible UARTs config SERIAL_SAMSUNG_UARTS int depends on SERIAL_SAMSUNG - default 4 if SERIAL_SAMSUNG_UARTS_4 || CPU_S3C2416 - default 3 + default 4 help Select the number of available UART ports for the Samsung S3C serial driverdrivers/tty/serial/samsung_tty.c +0
-199@@ -152,10 +152,6 @@ struct s3c24xx_uart_port {const struct s3c2410_uartcfg *cfg;struct s3c24xx_uart_dma *dma; - -#ifdef CONFIG_ARM_S3C24XX_CPUFREQ -struct notifier_block freq_transition; -#endif };static void s3c24xx_serial_tx_chars (struct s3c24xx_uart_port *ourport);@@ -1859,93 +1855,6 @@ static void s3c24xx_serial_resetport(struct uart_port *port,udelay (1 ); } -#ifdef CONFIG_ARM_S3C24XX_CPUFREQ - -static int s3c24xx_serial_cpufreq_transition (struct notifier_block *nb, -unsigned long val,void *data) -{ -struct s3c24xx_uart_port *port; -struct uart_port *uport; - - port = container_of(nb, struct s3c24xx_uart_port, freq_transition); - uport = &port->port; - -/* check to see if port is enabled */ - -if (port->pm_level !=0 ) -return 0 ; - -/* try and work out if the baudrate is changing, we can detect -* a change in rate, but we do not have support for detecting -* a disturbance in the clock-rate over the change. -*/ - -if (IS_ERR (port->baudclk)) - goto exit; - -if (port->baudclk_rate ==clk_get_rate (port->baudclk)) - goto exit; - -if (val ==CPUFREQ_PRECHANGE ) { -/* we should really shut the port down whilst the -* frequency change is in progress. -*/ - - }else if (val ==CPUFREQ_POSTCHANGE ) { -struct ktermios *termios; -struct tty_struct *tty; - -if (uport->state ==NULL ) - goto exit; - - tty = uport->state->port.tty; - -if (tty ==NULL ) - goto exit; - - termios = &tty->termios; - -if (termios ==NULL ) { -dev_warn (uport->dev,"%s: no termios?\n" , __func__); - goto exit; - } - -s3c24xx_serial_set_termios (uport, termios,NULL ); - } - -exit: -return 0 ; -} - -static inline int -s3c24xx_serial_cpufreq_register (struct s3c24xx_uart_port *port) -{ - port->freq_transition.notifier_call = s3c24xx_serial_cpufreq_transition; - -return cpufreq_register_notifier (&port->freq_transition, -CPUFREQ_TRANSITION_NOTIFIER ); -} - -static inline void -s3c24xx_serial_cpufreq_deregister (struct s3c24xx_uart_port *port) -{ -cpufreq_unregister_notifier (&port->freq_transition, -CPUFREQ_TRANSITION_NOTIFIER ); -} - -#else -static inline int -s3c24xx_serial_cpufreq_register (struct s3c24xx_uart_port *port) -{ -return 0 ; -} - -static inline void -s3c24xx_serial_cpufreq_deregister (struct s3c24xx_uart_port *port) -{ -} -#endif -static int s3c24xx_serial_enable_baudclk (struct s3c24xx_uart_port *ourport) {struct device *dev = ourport->port.dev;@@ -2237,10 +2146,6 @@ static int s3c24xx_serial_probe(struct platform_device *pdev)if (!IS_ERR (ourport->baudclk))clk_disable_unprepare (ourport->baudclk); - ret =s3c24xx_serial_cpufreq_register (ourport); -if (ret <0 ) -dev_err (&pdev->dev,"failed to add cpufreq notifier\n" ); - probe_index++;return 0 ;@@ -2251,7 +2156,6 @@ static int s3c24xx_serial_remove(struct platform_device *dev)struct uart_port *port =s3c24xx_dev_to_port (&dev->dev);if (port) { -s3c24xx_serial_cpufreq_deregister (to_ourport (port));uart_remove_one_port (&s3c24xx_uart_drv, port); }@@ -2589,94 +2493,6 @@ static struct console s3c24xx_serial_console = { };#endif /* CONFIG_SERIAL_SAMSUNG_CONSOLE */ -#ifdef CONFIG_CPU_S3C2410 -static const struct s3c24xx_serial_drv_data s3c2410_serial_drv_data = { - .info = { - .name ="Samsung S3C2410 UART" , - .type =TYPE_S3C24XX , - .port_type =PORT_S3C2410 , - .fifosize =16 , - .rx_fifomask =S3C2410_UFSTAT_RXMASK , - .rx_fifoshift =S3C2410_UFSTAT_RXSHIFT , - .rx_fifofull =S3C2410_UFSTAT_RXFULL , - .tx_fifofull =S3C2410_UFSTAT_TXFULL , - .tx_fifomask =S3C2410_UFSTAT_TXMASK , - .tx_fifoshift =S3C2410_UFSTAT_TXSHIFT , - .def_clk_sel =S3C2410_UCON_CLKSEL0 , - .num_clks =2 , - .clksel_mask =S3C2410_UCON_CLKMASK , - .clksel_shift =S3C2410_UCON_CLKSHIFT , - }, - .def_cfg = { - .ucon =S3C2410_UCON_DEFAULT , - .ufcon =S3C2410_UFCON_DEFAULT , - }, -}; -#define S3C2410_SERIAL_DRV_DATA (&s3c2410_serial_drv_data) -#else -#define S3C2410_SERIAL_DRV_DATA NULL -#endif - -#ifdef CONFIG_CPU_S3C2412 -static const struct s3c24xx_serial_drv_data s3c2412_serial_drv_data = { - .info = { - .name ="Samsung S3C2412 UART" , - .type =TYPE_S3C24XX , - .port_type =PORT_S3C2412 , - .fifosize =64 , - .has_divslot =1 , - .rx_fifomask =S3C2440_UFSTAT_RXMASK , - .rx_fifoshift =S3C2440_UFSTAT_RXSHIFT , - .rx_fifofull =S3C2440_UFSTAT_RXFULL , - .tx_fifofull =S3C2440_UFSTAT_TXFULL , - .tx_fifomask =S3C2440_UFSTAT_TXMASK , - .tx_fifoshift =S3C2440_UFSTAT_TXSHIFT , - .def_clk_sel =S3C2410_UCON_CLKSEL2 , - .num_clks =4 , - .clksel_mask =S3C2412_UCON_CLKMASK , - .clksel_shift =S3C2412_UCON_CLKSHIFT , - }, - .def_cfg = { - .ucon =S3C2410_UCON_DEFAULT , - .ufcon =S3C2410_UFCON_DEFAULT , - }, -}; -#define S3C2412_SERIAL_DRV_DATA (&s3c2412_serial_drv_data) -#else -#define S3C2412_SERIAL_DRV_DATA NULL -#endif - -#if defined(CONFIG_CPU_S3C2440 ) || defined(CONFIG_CPU_S3C2416 ) || \ - defined(CONFIG_CPU_S3C2443 ) || defined(CONFIG_CPU_S3C2442 ) -static const struct s3c24xx_serial_drv_data s3c2440_serial_drv_data = { - .info = { - .name ="Samsung S3C2440 UART" , - .type =TYPE_S3C24XX , - .port_type =PORT_S3C2440 , - .fifosize =64 , - .has_divslot =1 , - .rx_fifomask =S3C2440_UFSTAT_RXMASK , - .rx_fifoshift =S3C2440_UFSTAT_RXSHIFT , - .rx_fifofull =S3C2440_UFSTAT_RXFULL , - .tx_fifofull =S3C2440_UFSTAT_TXFULL , - .tx_fifomask =S3C2440_UFSTAT_TXMASK , - .tx_fifoshift =S3C2440_UFSTAT_TXSHIFT , - .def_clk_sel =S3C2410_UCON_CLKSEL2 , - .num_clks =4 , - .clksel_mask =S3C2412_UCON_CLKMASK , - .clksel_shift =S3C2412_UCON_CLKSHIFT , - .ucon_mask =S3C2440_UCON0_DIVMASK , - }, - .def_cfg = { - .ucon =S3C2410_UCON_DEFAULT , - .ufcon =S3C2410_UFCON_DEFAULT , - }, -}; -#define S3C2440_SERIAL_DRV_DATA (&s3c2440_serial_drv_data) -#else -#define S3C2440_SERIAL_DRV_DATA NULL -#endif - #if defined(CONFIG_CPU_S3C6400) || defined(CONFIG_CPU_S3C6410) static const struct s3c24xx_serial_drv_data s3c6400_serial_drv_data = { .info = {@@ -2845,15 +2661,6 @@ static const struct s3c24xx_serial_drv_data artpec8_serial_drv_data = {static const struct platform_device_id s3c24xx_serial_driver_ids[] = { { - .name ="s3c2410-uart" , - .driver_data = (kernel_ulong_t )S3C2410_SERIAL_DRV_DATA , - }, { - .name ="s3c2412-uart" , - .driver_data = (kernel_ulong_t )S3C2412_SERIAL_DRV_DATA , - }, { - .name ="s3c2440-uart" , - .driver_data = (kernel_ulong_t )S3C2440_SERIAL_DRV_DATA , - }, { .name ="s3c6400-uart" , .driver_data = (kernel_ulong_t )S3C6400_SERIAL_DRV_DATA , }, {@@ -2881,12 +2688,6 @@ MODULE_DEVICE_TABLE(platform, s3c24xx_serial_driver_ids); #ifdef CONFIG_OF static const struct of_device_id s3c24xx_uart_dt_match[] = { - { .compatible = "samsung,s3c2410-uart", - .data = S3C2410_SERIAL_DRV_DATA }, - { .compatible = "samsung,s3c2412-uart", - .data = S3C2412_SERIAL_DRV_DATA }, - { .compatible = "samsung,s3c2440-uart", - .data = S3C2440_SERIAL_DRV_DATA }, { .compatible = "samsung,s3c6400-uart", .data = S3C6400_SERIAL_DRV_DATA }, { .compatible = "samsung,s5pv210-uart",drivers/usb/host/Kconfig +4
-4@@ -443,12 +443,12 @@ config USB_OHCI_HCD_STI STMicroelectronics consumer electronics SoC's. config USB_OHCI_HCD_S3C2410 - tristate "OHCI support for Samsung S3C24xx/S3C64xx SoC series" - depends on USB_OHCI_HCD && (ARCH_S3C24XX || ARCH_S3C64XX || COMPILE_TEST) - default y if (ARCH_S3C24XX || ARCH_S3C64XX) + tristate "OHCI support for Samsung S3C64xx SoC series" + depends on USB_OHCI_HCD && (ARCH_S3C64XX || COMPILE_TEST) + default ARCH_S3C64XX help Enables support for the on-chip OHCI controller on - S3C24xx/S3C64xx chips. + S3C64xx chips. config USB_OHCI_HCD_LPC32XX tristate "Support for LPC on-chip OHCI USB controller"drivers/watchdog/Kconfig +4
-5@@ -491,14 +491,13 @@ config IXP4XX_WATCHDOG Say N if you are unsure. config S3C2410_WATCHDOG - tristate "S3C2410 Watchdog" - depends on ARCH_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210 || ARCH_EXYNOS || \ - COMPILE_TEST + tristate "S3C6410/S5Pv210/Exynos Watchdog" + depends on ARCH_S3C64XX || ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST select WATCHDOG_CORE select MFD_SYSCON if ARCH_EXYNOS help - Watchdog timer block in the Samsung S3C24xx, S3C64xx, S5Pv210 and - Exynos SoCs. This will reboot the system when the timer expires with + Watchdog timer block in the Samsung S3C64xx, S5Pv210 and Exynos + SoCs. This will reboot the system when the timer expires with the watchdog enabled. The driver is limited by the speed of the system's PCLKdrivers/watchdog/s3c2410_wdt.c +3
-81@@ -562,73 +562,6 @@ static irqreturn_t s3c2410wdt_irq(int irqno, void *param)return IRQ_HANDLED ; } -#ifdef CONFIG_ARM_S3C24XX_CPUFREQ - -static int s3c2410wdt_cpufreq_transition (struct notifier_block *nb, -unsigned long val,void *data) -{ -int ret; -struct s3c2410_wdt *wdt =freq_to_wdt (nb); - -if (!s3c2410wdt_is_running (wdt)) - goto done; - -if (val ==CPUFREQ_PRECHANGE ) { -/* To ensure that over the change we don't cause the -* watchdog to trigger, we perform an keep-alive if -* the watchdog is running. -*/ - -s3c2410wdt_keepalive (&wdt->wdt_device); - }else if (val ==CPUFREQ_POSTCHANGE ) { -s3c2410wdt_stop (&wdt->wdt_device); - - ret =s3c2410wdt_set_heartbeat (&wdt->wdt_device, - wdt->wdt_device.timeout); - -if (ret >=0 ) -s3c2410wdt_start (&wdt->wdt_device); -else - goto err; - } - -done: -return 0 ; - - err: -dev_err (wdt->dev,"cannot set new value for timeout %d\n" , - wdt->wdt_device.timeout); -return ret; -} - -static inline int s3c2410wdt_cpufreq_register (struct s3c2410_wdt *wdt) -{ - wdt->freq_transition.notifier_call = s3c2410wdt_cpufreq_transition; - -return cpufreq_register_notifier (&wdt->freq_transition, -CPUFREQ_TRANSITION_NOTIFIER ); -} - -static inline void s3c2410wdt_cpufreq_deregister (struct s3c2410_wdt *wdt) -{ - wdt->freq_transition.notifier_call = s3c2410wdt_cpufreq_transition; - -cpufreq_unregister_notifier (&wdt->freq_transition, -CPUFREQ_TRANSITION_NOTIFIER ); -} - -#else - -static inline int s3c2410wdt_cpufreq_register (struct s3c2410_wdt *wdt) -{ -return 0 ; -} - -static inline void s3c2410wdt_cpufreq_deregister (struct s3c2410_wdt *wdt) -{ -} -#endif -static inline unsigned int s3c2410wdt_get_bootstatus (struct s3c2410_wdt *wdt) {unsigned int rst_stat;@@ -761,12 +694,6 @@ static int s3c2410wdt_probe(struct platform_device *pdev) wdt->wdt_device.min_timeout =1 ; wdt->wdt_device.max_timeout =s3c2410wdt_max_timeout (wdt); - ret =s3c2410wdt_cpufreq_register (wdt); -if (ret <0 ) { -dev_err (dev,"failed to register cpufreq\n" ); - goto err_src_clk; - } -watchdog_set_drvdata (&wdt->wdt_device, wdt);/* see if we can actually set the requested timer margin, and if @@ -783,7 +710,7 @@ static int s3c2410wdt_probe(struct platform_device *pdev) S3C2410_WATCHDOG_DEFAULT_TIME); }else {dev_err (dev,"failed to use default timeout\n" ); - goto err_cpufreq; + goto err_src_clk; } }@@ -791,7 +718,7 @@ static int s3c2410wdt_probe(struct platform_device *pdev) pdev->name, pdev);if (ret !=0 ) {dev_err (dev,"failed to install irq (%d)\n" , ret); - goto err_cpufreq; + goto err_src_clk; }watchdog_set_nowayout (&wdt->wdt_device, nowayout);@@ -817,7 +744,7 @@ static int s3c2410wdt_probe(struct platform_device *pdev) ret =watchdog_register_device (&wdt->wdt_device);if (ret) - goto err_cpufreq; + goto err_src_clk; ret =s3c2410wdt_enable (wdt, true);if (ret <0 )@@ -839,9 +766,6 @@ static int s3c2410wdt_probe(struct platform_device *pdev) err_unregister:watchdog_unregister_device (&wdt->wdt_device); - err_cpufreq: -s3c2410wdt_cpufreq_deregister (wdt); - err_src_clk:clk_disable_unprepare (wdt->src_clk);@@ -862,8 +786,6 @@ static int s3c2410wdt_remove(struct platform_device *dev)watchdog_unregister_device (&wdt->wdt_device); -s3c2410wdt_cpufreq_deregister (wdt); -clk_disable_unprepare (wdt->src_clk);clk_disable_unprepare (wdt->bus_clk);include/linux/clk/samsung.h +0
-32@@ -21,36 +21,4 @@ static inline void s3c64xx_clk_init(struct device_node *np, bool s3c6400, void __iomem *base) { }#endif /* CONFIG_S3C64XX_COMMON_CLK */ -#ifdef CONFIG_S3C2410_COMMON_CLK -void s3c2410_common_clk_init (struct device_node *np,unsigned long xti_f, -int current_soc, -void __iomem *reg_base); -#else -static inline void s3c2410_common_clk_init (struct device_node *np, -unsigned long xti_f, -int current_soc, -void __iomem *reg_base) { } -#endif /* CONFIG_S3C2410_COMMON_CLK */ - -#ifdef CONFIG_S3C2412_COMMON_CLK -void s3c2412_common_clk_init (struct device_node *np,unsigned long xti_f, -unsigned long ext_f,void __iomem *reg_base); -#else -static inline void s3c2412_common_clk_init (struct device_node *np, -unsigned long xti_f, -unsigned long ext_f, -void __iomem *reg_base) { } -#endif /* CONFIG_S3C2412_COMMON_CLK */ - -#ifdef CONFIG_S3C2443_COMMON_CLK -void s3c2443_common_clk_init (struct device_node *np,unsigned long xti_f, -int current_soc, -void __iomem *reg_base); -#else -static inline void s3c2443_common_clk_init (struct device_node *np, -unsigned long xti_f, -int current_soc, -void __iomem *reg_base) { } -#endif /* CONFIG_S3C2443_COMMON_CLK */ -#endif /* __LINUX_CLK_SAMSUNG_H_ */ include/linux/soc/samsung/s3c-pm.h +0
-58@@ -14,58 +14,10 @@/* PM debug functions */ -/** -* struct pm_uart_save - save block for core UART -* @ulcon: Save value for S3C2410_ULCON -* @ucon: Save value for S3C2410_UCON -* @ufcon: Save value for S3C2410_UFCON -* @umcon: Save value for S3C2410_UMCON -* @ubrdiv: Save value for S3C2410_UBRDIV -* -* Save block for UART registers to be held over sleep and restored if they -* are needed (say by debug). -*/ -struct pm_uart_save { -u32 ulcon; -u32 ucon; -u32 ufcon; -u32 umcon; -u32 ubrdiv; -u32 udivslot; -}; - -#ifdef CONFIG_SAMSUNG_PM_DEBUG -/** -* s3c_pm_dbg() - low level debug function for use in suspend/resume. -* @msg: The message to print. -* -* This function is used mainly to debug the resume process before the system -* can rely on printk/console output. It uses the low-level debugging output -* routine printascii() to do its work. -*/ -extern void s3c_pm_dbg (const char *msg, ...); - -#define S3C_PMDBG(fmt...) s3c_pm_dbg(fmt) - -extern void s3c_pm_save_uarts (bool is_s3c24xx); -extern void s3c_pm_restore_uarts (bool is_s3c24xx); - -#ifdef CONFIG_ARCH_S3C64XX -extern void s3c_pm_arch_update_uart (void __iomem *regs, -struct pm_uart_save *save); -#else -static inline void -s3c_pm_arch_update_uart (void __iomem *regs,struct pm_uart_save *save) -{ -} -#endif - -#else #define S3C_PMDBG(fmt...) pr_debug(fmt)static inline void s3c_pm_save_uarts (bool is_s3c24xx) { }static inline void s3c_pm_restore_uarts (bool is_s3c24xx) { } -#endif /* suspend memory checking */ @@ -81,14 +33,4 @@ extern void s3c_pm_check_store(void);#define s3c_pm_check_store () do { } while (0)#endif -/* system device subsystems */ - -extern struct bus_type s3c2410_subsys; -extern struct bus_type s3c2410a_subsys; -extern struct bus_type s3c2412_subsys; -extern struct bus_type s3c2416_subsys; -extern struct bus_type s3c2440_subsys; -extern struct bus_type s3c2442_subsys; -extern struct bus_type s3c2443_subsys; -#endif
Re: [PATCH 02/21] ARM: s3c: remove s3c24xx specific hacks
In reply to Arnd BergmannQuoted 8 lines · Arnd Bergmann
From: Arnd Bergmann <[email protected]>
A number of device drivers reference
CONFIG_ARM_S3C24XX_CPUFREQor similar symbols that are no longer available with the platform gone, though the drivers themselves are still used on newer platforms, so remove these hacks.Signed-off-by Arnd Bergmann <[email protected]>
Signature · 5 lines
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook | <http://twitter.com/#!/linaroorg> Twitter | <http://www.linaro.org/linaro-blog/> Blog
Re: [PATCH 02/21] ARM: s3c: remove s3c24xx specific hacks
In reply to Arnd BergmannHi Arnd,
[email protected] wrote on Fri, 21 Oct 2022 22:27:35 +0200:
Quoted 8 lines
From: Arnd Bergmann <[email protected]>
A number of device drivers reference
CONFIG_ARM_S3C24XX_CPUFREQor similar symbols that are no longer available with the platform gone, though the drivers themselves are still used on newer platforms, so remove these hacks.Signed-off-by Arnd Bergmann <[email protected]>
Thanks,
Miquèl
Re: [PATCH 02/21] ARM: s3c: remove s3c24xx specific hacks
In reply to Arnd BergmannQuoted 8 lines · Arnd Bergmann
From: Arnd Bergmann <[email protected]>
A number of device drivers reference
CONFIG_ARM_S3C24XX_CPUFREQor similar symbols that are no longer available with the platform gone, though the drivers themselves are still used on newer platforms, so remove these hacks.Signed-off-by Arnd Bergmann <[email protected]>
Best regards,
Krzysztof
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
Re: [PATCH 02/21] ARM: s3c: remove s3c24xx specific hacks
In reply to Arnd BergmannQuoted 9 lines · Arnd Bergmann
From: Arnd Bergmann <[email protected]>
A number of device drivers reference
CONFIG_ARM_S3C24XX_CPUFREQor similar symbols that are no longer available with the platform gone, though the drivers themselves are still used on newer platforms, so remove these hacks.Signed-off-by Arnd Bergmann <[email protected]>
Kind regards
Uffe
Quoted 1,123 lines
--- arch/arm/include/debug/s3c24xx.S | 10 - arch/arm/mach-s3c/Makefile | 2 - arch/arm/mach-s3c/devs.c | 1 - arch/arm/mach-s3c/dma.h | 7 - arch/arm/mach-s3c/gpio-samsung.h | 7 - arch/arm/mach-s3c/irqs.h | 7 - arch/arm/mach-s3c/map.h | 7 - arch/arm/mach-s3c/pm-core.h | 7 - arch/arm/mach-s3c/regs-clock.h | 7 - arch/arm/mach-s3c/regs-gpio.h | 7 - arch/arm/mach-s3c/regs-irq.h | 7 - drivers/clocksource/Kconfig | 2 +- drivers/i2c/busses/Kconfig | 3 +- drivers/i2c/busses/i2c-s3c2410.c | 72 ------- drivers/iio/adc/Kconfig | 6 +- .../media/platform/samsung/s3c-camif/Kconfig | 8 +- drivers/mmc/host/Kconfig | 5 +- drivers/mtd/nand/raw/Kconfig | 2 +- drivers/mtd/nand/raw/s3c2410.c | 60 ------ drivers/pinctrl/samsung/pinctrl-samsung.c | 10 - drivers/rtc/Kconfig | 8 +- drivers/tty/serial/Kconfig | 8 +- drivers/tty/serial/samsung_tty.c | 199 ------------------ drivers/usb/host/Kconfig | 8 +- drivers/watchdog/Kconfig | 9 +- drivers/watchdog/s3c2410_wdt.c | 84 +------- include/linux/clk/samsung.h | 32 --- include/linux/soc/samsung/s3c-pm.h | 58 ----- 28 files changed, 29 insertions(+), 614 deletions(-)arch/arm/include/debug/s3c24xx.S +0
-10@@ -28,16 +28,6 @@ and \rd, \rd, #S3C2410_UFSTAT_TXMASK .endm -/* Select the correct implementation depending on the configuration. The - * S3C2440 will get selected by default, as these are the most widely - * used variants of these -*/ - -#if defined(CONFIG_DEBUG_S3C2410_UART) -#define fifo_full fifo_full_s3c2410 -#define fifo_level fifo_level_s3c2410 -#endif - /* include the reset of the code which will do the work */ #include <debug/samsung.S>arch/arm/mach-s3c/Makefile +0
-2@@ -2,9 +2,7 @@ # # Copyright 2009 Simtec Electronics -ifdef CONFIG_ARCH_S3C64XX include $(src)/Makefile.s3c64xx -endif # Objects we always build independent of SoC choicearch/arm/mach-s3c/devs.c +0
-1@@ -29,7 +29,6 @@#include <linux/sizes.h> #include <linux/platform_data/s3c-hsudc.h> #include <linux/platform_data/s3c-hsotg.h> -#include <linux/platform_data/dma-s3c24xx.h> #include <linux/platform_data/media/s5p_hdmi.h> arch/arm/mach-s3c/dma.h +0
-7@@ -1,9 +1,2 @@/* SPDX-License-Identifier: GPL-2.0 */ - -#ifdef CONFIG_ARCH_S3C24XX -#include "dma-s3c24xx.h" -#endif - -#ifdef CONFIG_ARCH_S3C64XX #include "dma-s3c64xx.h" -#endif arch/arm/mach-s3c/gpio-samsung.h +0
-7@@ -1,9 +1,2 @@/* SPDX-License-Identifier: GPL-2.0 */ - -#ifdef CONFIG_ARCH_S3C24XX -#include "gpio-samsung-s3c24xx.h" -#endif - -#ifdef CONFIG_ARCH_S3C64XX #include "gpio-samsung-s3c64xx.h" -#endif arch/arm/mach-s3c/irqs.h +0
-7@@ -1,9 +1,2 @@/* SPDX-License-Identifier: GPL-2.0 */ - -#ifdef CONFIG_ARCH_S3C24XX -#include "irqs-s3c24xx.h" -#endif - -#ifdef CONFIG_ARCH_S3C64XX #include "irqs-s3c64xx.h" -#endif arch/arm/mach-s3c/map.h +0
-7@@ -1,9 +1,2 @@/* SPDX-License-Identifier: GPL-2.0 */ - -#ifdef CONFIG_ARCH_S3C24XX -#include "map-s3c24xx.h" -#endif - -#ifdef CONFIG_ARCH_S3C64XX #include "map-s3c64xx.h" -#endif arch/arm/mach-s3c/pm-core.h +0
-7@@ -1,9 +1,2 @@/* SPDX-License-Identifier: GPL-2.0 */ - -#ifdef CONFIG_ARCH_S3C24XX -#include "pm-core-s3c24xx.h" -#endif - -#ifdef CONFIG_ARCH_S3C64XX #include "pm-core-s3c64xx.h" -#endif arch/arm/mach-s3c/regs-clock.h +0
-7@@ -1,9 +1,2 @@/* SPDX-License-Identifier: GPL-2.0 */ - -#ifdef CONFIG_ARCH_S3C24XX -#include "regs-clock-s3c24xx.h" -#endif - -#ifdef CONFIG_ARCH_S3C64XX #include "regs-clock-s3c64xx.h" -#endif arch/arm/mach-s3c/regs-gpio.h +0
-7@@ -1,9 +1,2 @@/* SPDX-License-Identifier: GPL-2.0 */ - -#ifdef CONFIG_ARCH_S3C24XX -#include "regs-gpio-s3c24xx.h" -#endif - -#ifdef CONFIG_ARCH_S3C64XX #include "regs-gpio-s3c64xx.h" -#endif arch/arm/mach-s3c/regs-irq.h +0
-7@@ -1,9 +1,2 @@/* SPDX-License-Identifier: GPL-2.0 */ - -#ifdef CONFIG_ARCH_S3C24XX -#include "regs-irq-s3c24xx.h" -#endif - -#ifdef CONFIG_ARCH_S3C64XX #include "regs-irq-s3c64xx.h" -#endif drivers/clocksource/Kconfig +1
-1@@ -441,7 +441,7 @@ config CLKSRC_EXYNOS_MCT config CLKSRC_SAMSUNG_PWM bool "PWM timer driver for Samsung S3C, S5P" if COMPILE_TEST depends on HAS_IOMEM - depends on ARCH_EXYNOS || ARCH_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210 || COMPILE_TEST + depends on ARCH_EXYNOS || ARCH_S3C64XX || ARCH_S5PV210 || COMPILE_TEST help This is a new clocksource driver for the PWM timer found in Samsung S3C, S5P and Exynos SoCs, replacing an earlier driverdrivers/i2c/busses/Kconfig +1
-2@@ -1009,8 +1009,7 @@ config I2C_RZV2M config I2C_S3C2410 tristate "S3C/Exynos I2C Driver" - depends on ARCH_EXYNOS || ARCH_S3C24XX || ARCH_S3C64XX || \ - ARCH_S5PV210 || COMPILE_TEST + depends on ARCH_EXYNOS || ARCH_S3C64XX || ARCH_S5PV210 || COMPILE_TEST help Say Y here to include support for I2C controller in the Samsung SoCs (S3C, S5Pv210, Exynos).drivers/i2c/busses/i2c-s3c2410.c +0
-72@@ -116,9 +116,6 @@ struct s3c24xx_i2c {struct s3c2410_platform_i2c *pdata;struct gpio_desc *gpios[2 ];struct pinctrl *pctrl; -#if defined(CONFIG_ARM_S3C24XX_CPUFREQ ) -struct notifier_block freq_transition; -#endif struct regmap *sysreg;unsigned int sys_i2c_cfg; };@@ -885,65 +882,6 @@ static int s3c24xx_i2c_clockrate(struct s3c24xx_i2c *i2c, unsigned int *got)return 0 ; } -#if defined(CONFIG_ARM_S3C24XX_CPUFREQ ) - -#define freq_to_i2c (_n) container_of(_n, struct s3c24xx_i2c, freq_transition) - -static int s3c24xx_i2c_cpufreq_transition (struct notifier_block *nb, -unsigned long val,void *data) -{ -struct s3c24xx_i2c *i2c =freq_to_i2c (nb); -unsigned int got; -int delta_f; -int ret; - - delta_f =clk_get_rate (i2c->clk) - i2c->clkrate; - -/* if we're post-change and the input clock has slowed down -* or at pre-change and the clock is about to speed up, then -* adjust our clock rate. <0 is slow, >0 speedup. -*/ - -if ((val ==CPUFREQ_POSTCHANGE && delta_f <0 ) || - (val ==CPUFREQ_PRECHANGE && delta_f >0 )) { -i2c_lock_bus (&i2c->adap,I2C_LOCK_ROOT_ADAPTER ); - ret =s3c24xx_i2c_clockrate (i2c, &got); -i2c_unlock_bus (&i2c->adap,I2C_LOCK_ROOT_ADAPTER ); - -if (ret <0 ) -dev_err (i2c->dev,"cannot find frequency (%d)\n" , ret); -else -dev_info (i2c->dev,"setting freq %d\n" , got); - } - -return 0 ; -} - -static inline int s3c24xx_i2c_register_cpufreq (struct s3c24xx_i2c *i2c) -{ - i2c->freq_transition.notifier_call = s3c24xx_i2c_cpufreq_transition; - -return cpufreq_register_notifier (&i2c->freq_transition, -CPUFREQ_TRANSITION_NOTIFIER ); -} - -static inline void s3c24xx_i2c_deregister_cpufreq (struct s3c24xx_i2c *i2c) -{ -cpufreq_unregister_notifier (&i2c->freq_transition, -CPUFREQ_TRANSITION_NOTIFIER ); -} - -#else -static inline int s3c24xx_i2c_register_cpufreq (struct s3c24xx_i2c *i2c) -{ -return 0 ; -} - -static inline void s3c24xx_i2c_deregister_cpufreq (struct s3c24xx_i2c *i2c) -{ -} -#endif -#ifdef CONFIG_OF static int s3c24xx_i2c_parse_dt_gpio (struct s3c24xx_i2c *i2c) {@@ -1152,13 +1090,6 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev) } } - ret =s3c24xx_i2c_register_cpufreq (i2c); -if (ret <0 ) { -dev_err (&pdev->dev,"failed to register cpufreq notifier\n" ); -clk_unprepare (i2c->clk); -return ret; - } -/* * Note, previous versions of the driver used i2c_add_adapter() * to add the bus at any number. We now pass the bus number via @@ -1175,7 +1106,6 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev) ret =i2c_add_numbered_adapter (&i2c->adap);if (ret <0 ) {pm_runtime_disable (&pdev->dev); -s3c24xx_i2c_deregister_cpufreq (i2c);clk_unprepare (i2c->clk);return ret; }@@ -1192,8 +1122,6 @@ static int s3c24xx_i2c_remove(struct platform_device *pdev)pm_runtime_disable (&pdev->dev); -s3c24xx_i2c_deregister_cpufreq (i2c); -i2c_del_adapter (&i2c->adap);return 0 ;drivers/iio/adc/Kconfig +3
-3@@ -437,11 +437,11 @@ config EP93XX_ADC config EXYNOS_ADC tristate "Exynos ADC driver support" - depends on ARCH_EXYNOS || ARCH_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210 || (OF && COMPILE_TEST) + depends on ARCH_EXYNOS || ARCH_S3C64XX || ARCH_S5PV210 || (OF && COMPILE_TEST) depends on HAS_IOMEM help - Driver for the ADC block found in the Samsung S3C (S3C2410, S3C2416, - S3C2440, S3C2443, S3C6410), S5Pv210 and Exynos SoCs. + Driver for the ADC block found in the Samsung S3C6410, S5Pv210 and + Exynos SoCs. Choose Y here only if you build for such Samsung SoC. To compile this driver as a module, choose M here: the module will bedrivers/media/platform/samsung/s3c-camif/Kconfig +4
-4@@ -1,15 +1,15 @@ # SPDX-License-Identifier: GPL-2.0-only config VIDEO_S3C_CAMIF - tristate "Samsung S3C24XX/S3C64XX SoC Camera Interface driver" + tristate "Samsung 3C64XX SoC Camera Interface driver" depends on V4L_PLATFORM_DRIVERS depends on VIDEO_DEV && I2C && PM - depends on ARCH_S3C64XX || PLAT_S3C24XX || COMPILE_TEST + depends on ARCH_S3C64XX || COMPILE_TEST select MEDIA_CONTROLLER select VIDEO_V4L2_SUBDEV_API select VIDEOBUF2_DMA_CONTIG help - This is a v4l2 driver for s3c24xx and s3c64xx SoC series camera - host interface (CAMIF). + This is a v4l2 driver for s3c64xx SoC series camera host interface + (CAMIF). To compile this driver as a module, choose M here: the module will be called s3c-camif.drivers/mmc/host/Kconfig +2
-3@@ -312,9 +312,8 @@ config MMC_SDHCI_S3C depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST help This selects the Secure Digital Host Controller Interface (SDHCI) - often referrered to as the HSMMC block in some of the Samsung S3C - (S3C2416, S3C2443, S3C6410), S5Pv210 and Exynos (Exynso4210, - Exynos4412) SoCs. + often referrered to as the HSMMC block in some of the Samsung + S3C6410, S5Pv210 and Exynos (Exynso4210, Exynos4412) SoCs. If you have a controller with this interface (thereforeyou build for such Samsung SoC), say Y or M here.drivers/mtd/nand/raw/Kconfig +1
-1@@ -79,7 +79,7 @@ config MTD_NAND_NDFC config MTD_NAND_S3C2410 tristate "Samsung S3C NAND controller" - depends on ARCH_S3C24XX || ARCH_S3C64XX + depends on ARCH_S3C64XX help This enables the NAND flash controller on the S3C24xx and S3C64xx SoCsdrivers/mtd/nand/raw/s3c2410.c +0
-60@@ -166,10 +166,6 @@ struct s3c2410_nand_info {enum s3c_nand_clk_state clk_state;enum s3c_cpu_type cpu_type; - -#ifdef CONFIG_ARM_S3C24XX_CPUFREQ -struct notifier_block freq_transition; -#endif };struct s3c24XX_nand_devtype_data {@@ -711,54 +707,6 @@ static void s3c2440_nand_write_buf(struct nand_chip *this, const u_char *buf, } } -/* cpufreq driver support */ - -#ifdef CONFIG_ARM_S3C24XX_CPUFREQ - -static int s3c2410_nand_cpufreq_transition (struct notifier_block *nb, -unsigned long val,void *data) -{ -struct s3c2410_nand_info *info; -unsigned long newclk; - - info = container_of(nb, struct s3c2410_nand_info, freq_transition); - newclk =clk_get_rate (info->clk); - -if ((val ==CPUFREQ_POSTCHANGE && newclk < info->clk_rate) || - (val ==CPUFREQ_PRECHANGE && newclk > info->clk_rate)) { -s3c2410_nand_setrate (info); - } - -return 0 ; -} - -static inline int s3c2410_nand_cpufreq_register (struct s3c2410_nand_info *info) -{ - info->freq_transition.notifier_call = s3c2410_nand_cpufreq_transition; - -return cpufreq_register_notifier (&info->freq_transition, -CPUFREQ_TRANSITION_NOTIFIER ); -} - -static inline void -s3c2410_nand_cpufreq_deregister (struct s3c2410_nand_info *info) -{ -cpufreq_unregister_notifier (&info->freq_transition, -CPUFREQ_TRANSITION_NOTIFIER ); -} - -#else -static inline int s3c2410_nand_cpufreq_register (struct s3c2410_nand_info *info) -{ -return 0 ; -} - -static inline void -s3c2410_nand_cpufreq_deregister (struct s3c2410_nand_info *info) -{ -} -#endif -/* device management functions */ static int s3c24xx_nand_remove (struct platform_device *pdev)@@ -768,8 +716,6 @@ static int s3c24xx_nand_remove(struct platform_device *pdev)if (info ==NULL )return 0 ; -s3c2410_nand_cpufreq_deregister (info); -/* Release all our mtds and their partitions, then go through * freeing the resources used */ @@ -1184,12 +1130,6 @@ static int s3c24xx_nand_probe(struct platform_device *pdev)if (err !=0 ) goto exit_error; - err =s3c2410_nand_cpufreq_register (info); -if (err <0 ) { -dev_err (&pdev->dev,"failed to init cpufreq support\n" ); - goto exit_error; - } -if (allow_clk_suspend (info)) {dev_info (&pdev->dev,"clock idle support enabled\n" );s3c2410_nand_clk_set_state (info,CLOCK_SUSPEND );drivers/pinctrl/samsung/pinctrl-samsung.c +0
-10@@ -1322,16 +1322,6 @@ static const struct of_device_id samsung_pinctrl_dt_match[] = {#ifdef CONFIG_PINCTRL_S3C64XX { .compatible = "samsung,s3c64xx-pinctrl", .data = &s3c64xx_of_data }, -#endif -#ifdef CONFIG_PINCTRL_S3C24XX - { .compatible = "samsung,s3c2412-pinctrl", - .data = &s3c2412_of_data }, - { .compatible = "samsung,s3c2416-pinctrl", - .data = &s3c2416_of_data }, - { .compatible = "samsung,s3c2440-pinctrl", - .data = &s3c2440_of_data }, - { .compatible = "samsung,s3c2450-pinctrl", - .data = &s3c2450_of_data },#endif {}, };drivers/rtc/Kconfig +2
-6@@ -1406,18 +1406,14 @@ config RTC_DRV_OMAP config RTC_DRV_S3C tristate "Samsung S3C series SoC RTC" - depends on ARCH_EXYNOS || ARCH_S3C64XX || ARCH_S3C24XX || ARCH_S5PV210 || \ + depends on ARCH_EXYNOS || ARCH_S3C64XX || ARCH_S5PV210 || \ COMPILE_TEST help RTC (Realtime Clock) driver for the clock inbuilt into the - Samsung S3C24XX series of SoCs. This can provide periodic + Samsung S3C64XX series of SoCs. This can provide periodic interrupt rates from 1Hz to 64Hz for user programs, and wakeup from Alarm. - The driver currently supports the common features on all the - S3C24XX range, such as the S3C2410, S3C2412, S3C2413, S3C2440 - and S3C2442. - This driver can also be build as a module. If so, the module will be called rtc-s3c.drivers/tty/serial/Kconfig +4
-4@@ -242,23 +242,23 @@ config SERIAL_SAMSUNG select SERIAL_CORE help Support for the on-chip UARTs on the Samsung - S3C24xx/S3C64xx/S5Pv210/Exynos and Apple M1 SoCs, providing + S3C64xx/S5Pv210/Exynos and Apple M1 SoCs, providing /dev/ttySAC0, 1 and 2 (note, some machines may not provide all of these ports, depending on how the serial port pins are configured. + Choose Y/M here only if you build for such SoC. config SERIAL_SAMSUNG_UARTS_4 bool depends on SERIAL_SAMSUNG - default y if !(CPU_S3C2410 || CPU_S3C2412 || CPU_S3C2440 || CPU_S3C2442) + default y help Internal node for the common case of 4 Samsung compatible UARTs config SERIAL_SAMSUNG_UARTS int depends on SERIAL_SAMSUNG - default 4 if SERIAL_SAMSUNG_UARTS_4 || CPU_S3C2416 - default 3 + default 4 help Select the number of available UART ports for the Samsung S3C serial driverdrivers/tty/serial/samsung_tty.c +0
-199@@ -152,10 +152,6 @@ struct s3c24xx_uart_port {const struct s3c2410_uartcfg *cfg;struct s3c24xx_uart_dma *dma; - -#ifdef CONFIG_ARM_S3C24XX_CPUFREQ -struct notifier_block freq_transition; -#endif };static void s3c24xx_serial_tx_chars (struct s3c24xx_uart_port *ourport);@@ -1859,93 +1855,6 @@ static void s3c24xx_serial_resetport(struct uart_port *port,udelay (1 ); } -#ifdef CONFIG_ARM_S3C24XX_CPUFREQ - -static int s3c24xx_serial_cpufreq_transition (struct notifier_block *nb, -unsigned long val,void *data) -{ -struct s3c24xx_uart_port *port; -struct uart_port *uport; - - port = container_of(nb, struct s3c24xx_uart_port, freq_transition); - uport = &port->port; - -/* check to see if port is enabled */ - -if (port->pm_level !=0 ) -return 0 ; - -/* try and work out if the baudrate is changing, we can detect -* a change in rate, but we do not have support for detecting -* a disturbance in the clock-rate over the change. -*/ - -if (IS_ERR (port->baudclk)) - goto exit; - -if (port->baudclk_rate ==clk_get_rate (port->baudclk)) - goto exit; - -if (val ==CPUFREQ_PRECHANGE ) { -/* we should really shut the port down whilst the -* frequency change is in progress. -*/ - - }else if (val ==CPUFREQ_POSTCHANGE ) { -struct ktermios *termios; -struct tty_struct *tty; - -if (uport->state ==NULL ) - goto exit; - - tty = uport->state->port.tty; - -if (tty ==NULL ) - goto exit; - - termios = &tty->termios; - -if (termios ==NULL ) { -dev_warn (uport->dev,"%s: no termios?\n" , __func__); - goto exit; - } - -s3c24xx_serial_set_termios (uport, termios,NULL ); - } - -exit: -return 0 ; -} - -static inline int -s3c24xx_serial_cpufreq_register (struct s3c24xx_uart_port *port) -{ - port->freq_transition.notifier_call = s3c24xx_serial_cpufreq_transition; - -return cpufreq_register_notifier (&port->freq_transition, -CPUFREQ_TRANSITION_NOTIFIER ); -} - -static inline void -s3c24xx_serial_cpufreq_deregister (struct s3c24xx_uart_port *port) -{ -cpufreq_unregister_notifier (&port->freq_transition, -CPUFREQ_TRANSITION_NOTIFIER ); -} - -#else -static inline int -s3c24xx_serial_cpufreq_register (struct s3c24xx_uart_port *port) -{ -return 0 ; -} - -static inline void -s3c24xx_serial_cpufreq_deregister (struct s3c24xx_uart_port *port) -{ -} -#endif -static int s3c24xx_serial_enable_baudclk (struct s3c24xx_uart_port *ourport) {struct device *dev = ourport->port.dev;@@ -2237,10 +2146,6 @@ static int s3c24xx_serial_probe(struct platform_device *pdev)if (!IS_ERR (ourport->baudclk))clk_disable_unprepare (ourport->baudclk); - ret =s3c24xx_serial_cpufreq_register (ourport); -if (ret <0 ) -dev_err (&pdev->dev,"failed to add cpufreq notifier\n" ); - probe_index++;return 0 ;@@ -2251,7 +2156,6 @@ static int s3c24xx_serial_remove(struct platform_device *dev)struct uart_port *port =s3c24xx_dev_to_port (&dev->dev);if (port) { -s3c24xx_serial_cpufreq_deregister (to_ourport (port));uart_remove_one_port (&s3c24xx_uart_drv, port); }@@ -2589,94 +2493,6 @@ static struct console s3c24xx_serial_console = { };#endif /* CONFIG_SERIAL_SAMSUNG_CONSOLE */ -#ifdef CONFIG_CPU_S3C2410 -static const struct s3c24xx_serial_drv_data s3c2410_serial_drv_data = { - .info = { - .name ="Samsung S3C2410 UART" , - .type =TYPE_S3C24XX , - .port_type =PORT_S3C2410 , - .fifosize =16 , - .rx_fifomask =S3C2410_UFSTAT_RXMASK , - .rx_fifoshift =S3C2410_UFSTAT_RXSHIFT , - .rx_fifofull =S3C2410_UFSTAT_RXFULL , - .tx_fifofull =S3C2410_UFSTAT_TXFULL , - .tx_fifomask =S3C2410_UFSTAT_TXMASK , - .tx_fifoshift =S3C2410_UFSTAT_TXSHIFT , - .def_clk_sel =S3C2410_UCON_CLKSEL0 , - .num_clks =2 , - .clksel_mask =S3C2410_UCON_CLKMASK , - .clksel_shift =S3C2410_UCON_CLKSHIFT , - }, - .def_cfg = { - .ucon =S3C2410_UCON_DEFAULT , - .ufcon =S3C2410_UFCON_DEFAULT , - }, -}; -#define S3C2410_SERIAL_DRV_DATA (&s3c2410_serial_drv_data) -#else -#define S3C2410_SERIAL_DRV_DATA NULL -#endif - -#ifdef CONFIG_CPU_S3C2412 -static const struct s3c24xx_serial_drv_data s3c2412_serial_drv_data = { - .info = { - .name ="Samsung S3C2412 UART" , - .type =TYPE_S3C24XX , - .port_type =PORT_S3C2412 , - .fifosize =64 , - .has_divslot =1 , - .rx_fifomask =S3C2440_UFSTAT_RXMASK , - .rx_fifoshift =S3C2440_UFSTAT_RXSHIFT , - .rx_fifofull =S3C2440_UFSTAT_RXFULL , - .tx_fifofull =S3C2440_UFSTAT_TXFULL , - .tx_fifomask =S3C2440_UFSTAT_TXMASK , - .tx_fifoshift =S3C2440_UFSTAT_TXSHIFT , - .def_clk_sel =S3C2410_UCON_CLKSEL2 , - .num_clks =4 , - .clksel_mask =S3C2412_UCON_CLKMASK , - .clksel_shift =S3C2412_UCON_CLKSHIFT , - }, - .def_cfg = { - .ucon =S3C2410_UCON_DEFAULT , - .ufcon =S3C2410_UFCON_DEFAULT , - }, -}; -#define S3C2412_SERIAL_DRV_DATA (&s3c2412_serial_drv_data) -#else -#define S3C2412_SERIAL_DRV_DATA NULL -#endif - -#if defined(CONFIG_CPU_S3C2440 ) || defined(CONFIG_CPU_S3C2416 ) || \ - defined(CONFIG_CPU_S3C2443 ) || defined(CONFIG_CPU_S3C2442 ) -static const struct s3c24xx_serial_drv_data s3c2440_serial_drv_data = { - .info = { - .name ="Samsung S3C2440 UART" , - .type =TYPE_S3C24XX , - .port_type =PORT_S3C2440 , - .fifosize =64 , - .has_divslot =1 , - .rx_fifomask =S3C2440_UFSTAT_RXMASK , - .rx_fifoshift =S3C2440_UFSTAT_RXSHIFT , - .rx_fifofull =S3C2440_UFSTAT_RXFULL , - .tx_fifofull =S3C2440_UFSTAT_TXFULL , - .tx_fifomask =S3C2440_UFSTAT_TXMASK , - .tx_fifoshift =S3C2440_UFSTAT_TXSHIFT , - .def_clk_sel =S3C2410_UCON_CLKSEL2 , - .num_clks =4 , - .clksel_mask =S3C2412_UCON_CLKMASK , - .clksel_shift =S3C2412_UCON_CLKSHIFT , - .ucon_mask =S3C2440_UCON0_DIVMASK , - }, - .def_cfg = { - .ucon =S3C2410_UCON_DEFAULT , - .ufcon =S3C2410_UFCON_DEFAULT , - }, -}; -#define S3C2440_SERIAL_DRV_DATA (&s3c2440_serial_drv_data) -#else -#define S3C2440_SERIAL_DRV_DATA NULL -#endif - #if defined(CONFIG_CPU_S3C6400) || defined(CONFIG_CPU_S3C6410) static const struct s3c24xx_serial_drv_data s3c6400_serial_drv_data = { .info = {@@ -2845,15 +2661,6 @@ static const struct s3c24xx_serial_drv_data artpec8_serial_drv_data = {static const struct platform_device_id s3c24xx_serial_driver_ids[] = { { - .name ="s3c2410-uart" , - .driver_data = (kernel_ulong_t )S3C2410_SERIAL_DRV_DATA , - }, { - .name ="s3c2412-uart" , - .driver_data = (kernel_ulong_t )S3C2412_SERIAL_DRV_DATA , - }, { - .name ="s3c2440-uart" , - .driver_data = (kernel_ulong_t )S3C2440_SERIAL_DRV_DATA , - }, { .name ="s3c6400-uart" , .driver_data = (kernel_ulong_t )S3C6400_SERIAL_DRV_DATA , }, {@@ -2881,12 +2688,6 @@ MODULE_DEVICE_TABLE(platform, s3c24xx_serial_driver_ids); #ifdef CONFIG_OF static const struct of_device_id s3c24xx_uart_dt_match[] = { - { .compatible = "samsung,s3c2410-uart", - .data = S3C2410_SERIAL_DRV_DATA }, - { .compatible = "samsung,s3c2412-uart", - .data = S3C2412_SERIAL_DRV_DATA }, - { .compatible = "samsung,s3c2440-uart", - .data = S3C2440_SERIAL_DRV_DATA }, { .compatible = "samsung,s3c6400-uart", .data = S3C6400_SERIAL_DRV_DATA }, { .compatible = "samsung,s5pv210-uart",drivers/usb/host/Kconfig +4
-4@@ -443,12 +443,12 @@ config USB_OHCI_HCD_STI STMicroelectronics consumer electronics SoC's. config USB_OHCI_HCD_S3C2410 - tristate "OHCI support for Samsung S3C24xx/S3C64xx SoC series" - depends on USB_OHCI_HCD && (ARCH_S3C24XX || ARCH_S3C64XX || COMPILE_TEST) - default y if (ARCH_S3C24XX || ARCH_S3C64XX) + tristate "OHCI support for Samsung S3C64xx SoC series" + depends on USB_OHCI_HCD && (ARCH_S3C64XX || COMPILE_TEST) + default ARCH_S3C64XX help Enables support for the on-chip OHCI controller on - S3C24xx/S3C64xx chips. + S3C64xx chips. config USB_OHCI_HCD_LPC32XX tristate "Support for LPC on-chip OHCI USB controller"drivers/watchdog/Kconfig +4
-5@@ -491,14 +491,13 @@ config IXP4XX_WATCHDOG Say N if you are unsure. config S3C2410_WATCHDOG - tristate "S3C2410 Watchdog" - depends on ARCH_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210 || ARCH_EXYNOS || \ - COMPILE_TEST + tristate "S3C6410/S5Pv210/Exynos Watchdog" + depends on ARCH_S3C64XX || ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST select WATCHDOG_CORE select MFD_SYSCON if ARCH_EXYNOS help - Watchdog timer block in the Samsung S3C24xx, S3C64xx, S5Pv210 and - Exynos SoCs. This will reboot the system when the timer expires with + Watchdog timer block in the Samsung S3C64xx, S5Pv210 and Exynos + SoCs. This will reboot the system when the timer expires with the watchdog enabled. The driver is limited by the speed of the system's PCLKdrivers/watchdog/s3c2410_wdt.c +3
-81@@ -562,73 +562,6 @@ static irqreturn_t s3c2410wdt_irq(int irqno, void *param)return IRQ_HANDLED ; } -#ifdef CONFIG_ARM_S3C24XX_CPUFREQ - -static int s3c2410wdt_cpufreq_transition (struct notifier_block *nb, -unsigned long val,void *data) -{ -int ret; -struct s3c2410_wdt *wdt =freq_to_wdt (nb); - -if (!s3c2410wdt_is_running (wdt)) - goto done; - -if (val ==CPUFREQ_PRECHANGE ) { -/* To ensure that over the change we don't cause the -* watchdog to trigger, we perform an keep-alive if -* the watchdog is running. -*/ - -s3c2410wdt_keepalive (&wdt->wdt_device); - }else if (val ==CPUFREQ_POSTCHANGE ) { -s3c2410wdt_stop (&wdt->wdt_device); - - ret =s3c2410wdt_set_heartbeat (&wdt->wdt_device, - wdt->wdt_device.timeout); - -if (ret >=0 ) -s3c2410wdt_start (&wdt->wdt_device); -else - goto err; - } - -done: -return 0 ; - - err: -dev_err (wdt->dev,"cannot set new value for timeout %d\n" , - wdt->wdt_device.timeout); -return ret; -} - -static inline int s3c2410wdt_cpufreq_register (struct s3c2410_wdt *wdt) -{ - wdt->freq_transition.notifier_call = s3c2410wdt_cpufreq_transition; - -return cpufreq_register_notifier (&wdt->freq_transition, -CPUFREQ_TRANSITION_NOTIFIER ); -} - -static inline void s3c2410wdt_cpufreq_deregister (struct s3c2410_wdt *wdt) -{ - wdt->freq_transition.notifier_call = s3c2410wdt_cpufreq_transition; - -cpufreq_unregister_notifier (&wdt->freq_transition, -CPUFREQ_TRANSITION_NOTIFIER ); -} - -#else - -static inline int s3c2410wdt_cpufreq_register (struct s3c2410_wdt *wdt) -{ -return 0 ; -} - -static inline void s3c2410wdt_cpufreq_deregister (struct s3c2410_wdt *wdt) -{ -} -#endif -static inline unsigned int s3c2410wdt_get_bootstatus (struct s3c2410_wdt *wdt) {unsigned int rst_stat;@@ -761,12 +694,6 @@ static int s3c2410wdt_probe(struct platform_device *pdev) wdt->wdt_device.min_timeout =1 ; wdt->wdt_device.max_timeout =s3c2410wdt_max_timeout (wdt); - ret =s3c2410wdt_cpufreq_register (wdt); -if (ret <0 ) { -dev_err (dev,"failed to register cpufreq\n" ); - goto err_src_clk; - } -watchdog_set_drvdata (&wdt->wdt_device, wdt);/* see if we can actually set the requested timer margin, and if @@ -783,7 +710,7 @@ static int s3c2410wdt_probe(struct platform_device *pdev) S3C2410_WATCHDOG_DEFAULT_TIME); }else {dev_err (dev,"failed to use default timeout\n" ); - goto err_cpufreq; + goto err_src_clk; } }@@ -791,7 +718,7 @@ static int s3c2410wdt_probe(struct platform_device *pdev) pdev->name, pdev);if (ret !=0 ) {dev_err (dev,"failed to install irq (%d)\n" , ret); - goto err_cpufreq; + goto err_src_clk; }watchdog_set_nowayout (&wdt->wdt_device, nowayout);@@ -817,7 +744,7 @@ static int s3c2410wdt_probe(struct platform_device *pdev) ret =watchdog_register_device (&wdt->wdt_device);if (ret) - goto err_cpufreq; + goto err_src_clk; ret =s3c2410wdt_enable (wdt, true);if (ret <0 )@@ -839,9 +766,6 @@ static int s3c2410wdt_probe(struct platform_device *pdev) err_unregister:watchdog_unregister_device (&wdt->wdt_device); - err_cpufreq: -s3c2410wdt_cpufreq_deregister (wdt); - err_src_clk:clk_disable_unprepare (wdt->src_clk);@@ -862,8 +786,6 @@ static int s3c2410wdt_remove(struct platform_device *dev)watchdog_unregister_device (&wdt->wdt_device); -s3c2410wdt_cpufreq_deregister (wdt); -clk_disable_unprepare (wdt->src_clk);clk_disable_unprepare (wdt->bus_clk);include/linux/clk/samsung.h +0
-32@@ -21,36 +21,4 @@ static inline void s3c64xx_clk_init(struct device_node *np, bool s3c6400, void __iomem *base) { }#endif /* CONFIG_S3C64XX_COMMON_CLK */ -#ifdef CONFIG_S3C2410_COMMON_CLK -void s3c2410_common_clk_init (struct device_node *np,unsigned long xti_f, -int current_soc, -void __iomem *reg_base); -#else -static inline void s3c2410_common_clk_init (struct device_node *np, -unsigned long xti_f, -int current_soc, -void __iomem *reg_base) { } -#endif /* CONFIG_S3C2410_COMMON_CLK */ - -#ifdef CONFIG_S3C2412_COMMON_CLK -void s3c2412_common_clk_init (struct device_node *np,unsigned long xti_f, -unsigned long ext_f,void __iomem *reg_base); -#else -static inline void s3c2412_common_clk_init (struct device_node *np, -unsigned long xti_f, -unsigned long ext_f, -void __iomem *reg_base) { } -#endif /* CONFIG_S3C2412_COMMON_CLK */ - -#ifdef CONFIG_S3C2443_COMMON_CLK -void s3c2443_common_clk_init (struct device_node *np,unsigned long xti_f, -int current_soc, -void __iomem *reg_base); -#else -static inline void s3c2443_common_clk_init (struct device_node *np, -unsigned long xti_f, -int current_soc, -void __iomem *reg_base) { } -#endif /* CONFIG_S3C2443_COMMON_CLK */ -#endif /* __LINUX_CLK_SAMSUNG_H_ */ include/linux/soc/samsung/s3c-pm.h +0
-59@@ -14,58 +14,10 @@/* PM debug functions */ -/** -* struct pm_uart_save - save block for core UART -* @ulcon: Save value for S3C2410_ULCON -* @ucon: Save value for S3C2410_UCON -* @ufcon: Save value for S3C2410_UFCON -* @umcon: Save value for S3C2410_UMCON -* @ubrdiv: Save value for S3C2410_UBRDIV -* -* Save block for UART registers to be held over sleep and restored if they -* are needed (say by debug). -*/ -struct pm_uart_save { -u32 ulcon; -u32 ucon; -u32 ufcon; -u32 umcon; -u32 ubrdiv; -u32 udivslot; -}; - -#ifdef CONFIG_SAMSUNG_PM_DEBUG -/** -* s3c_pm_dbg() - low level debug function for use in suspend/resume. -* @msg: The message to print. -* -* This function is used mainly to debug the resume process before the system -* can rely on printk/console output. It uses the low-level debugging output -* routine printascii() to do its work. -*/ -extern void s3c_pm_dbg (const char *msg, ...); - -#define S3C_PMDBG(fmt...) s3c_pm_dbg(fmt) - -extern void s3c_pm_save_uarts (bool is_s3c24xx); -extern void s3c_pm_restore_uarts (bool is_s3c24xx); - -#ifdef CONFIG_ARCH_S3C64XX -extern void s3c_pm_arch_update_uart (void __iomem *regs, -struct pm_uart_save *save); -#else -static inline void -s3c_pm_arch_update_uart (void __iomem *regs,struct pm_uart_save *save) -{ -} -#endif - -#else #define S3C_PMDBG(fmt...) pr_debug(fmt)static inline void s3c_pm_save_uarts (bool is_s3c24xx) { }static inline void s3c_pm_restore_uarts (bool is_s3c24xx) { } -#endif /* suspend memory checking */ @@ -81,14 +33,4 @@ extern void s3c_pm_check_store(void);#define s3c_pm_check_store () do { } while (0)#endif -/* system device subsystems */ - -extern struct bus_type s3c2410_subsys; -extern struct bus_type s3c2410a_subsys; -extern struct bus_type s3c2412_subsys; -extern struct bus_type s3c2416_subsys; -extern struct bus_type s3c2440_subsys; -extern struct bus_type s3c2442_subsys; -extern struct bus_type s3c2443_subsys; -#endif --
Quoted 2 lines
2.29.2
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
Re: [PATCH 02/21] ARM: s3c: remove s3c24xx specific hacks
In reply to Arnd BergmannQuoting Arnd Bergmann (2022-10-21 13:27:35)
Quoted 9 lines
From: Arnd Bergmann <[email protected]>
A number of device drivers reference
CONFIG_ARM_S3C24XX_CPUFREQor similar symbols that are no longer available with the platform gone, though the drivers themselves are still used on newer platforms, so remove these hacks.Signed-off-by Arnd Bergmann <[email protected]>---
PATCH 3/21 ARM: s3c: remove most s3c64xx board support
In reply to Arnd BergmannFrom: Arnd Bergmann <[email protected]>
All traditional board files except for MACH_WLF_CRAGG_6410 were marked as unused, so remove them now.
--- arch/arm/mach-s3c/Kconfig.s3c64xx | 206 ------- arch/arm/mach-s3c/Makefile.s3c64xx | 13 - arch/arm/mach-s3c/dev-backlight-s3c64xx.c | 137 ----- arch/arm/mach-s3c/mach-anw6410.c | 230 ------- arch/arm/mach-s3c/mach-hmt.c | 282 --------- arch/arm/mach-s3c/mach-mini6410.c | 365 ----------- arch/arm/mach-s3c/mach-ncp.c | 100 --- arch/arm/mach-s3c/mach-real6410.c | 333 ---------- arch/arm/mach-s3c/mach-smartq.c | 424 ------------- arch/arm/mach-s3c/mach-smartq.h | 16 - arch/arm/mach-s3c/mach-smartq5.c | 154 ----- arch/arm/mach-s3c/mach-smartq7.c | 170 ------ arch/arm/mach-s3c/mach-smdk6400.c | 90 --- arch/arm/mach-s3c/mach-smdk6410.c | 706 ---------------------- 14 files changed, 3226 deletions(-) delete mode 100644 arch/arm/mach-s3c/dev-backlight-s3c64xx.c delete mode 100644 arch/arm/mach-s3c/mach-anw6410.c delete mode 100644 arch/arm/mach-s3c/mach-hmt.c delete mode 100644 arch/arm/mach-s3c/mach-mini6410.c delete mode 100644 arch/arm/mach-s3c/mach-ncp.c delete mode 100644 arch/arm/mach-s3c/mach-real6410.c delete mode 100644 arch/arm/mach-s3c/mach-smartq.c delete mode 100644 arch/arm/mach-s3c/mach-smartq.h delete mode 100644 arch/arm/mach-s3c/mach-smartq5.c delete mode 100644 arch/arm/mach-s3c/mach-smartq7.c delete mode 100644 arch/arm/mach-s3c/mach-smdk6400.c delete mode 100644 arch/arm/mach-s3c/mach-smdk6410.c
arch/arm/mach-s3c/Kconfig.s3c64xx +0 -206
@@ -54,17 +54,6 @@ config S3C64XX_SETUP_SDHCI Internal configuration for default SDHCI setup for S3C6400 and S3C6410 SoCs. -config S3C64XX_DEV_ONENAND1 - bool - help - Compile in platform device definition for OneNAND1 controller - -config SAMSUNG_DEV_BACKLIGHT - bool - depends on SAMSUNG_DEV_PWM - help - Compile in platform device definition LCD backlight with PWM Timer - # platform specific device setup config S3C64XX_SETUP_I2C0
@@ -113,201 +102,6 @@ config S3C64XX_SETUP_USB_PHY # S36400 Macchine support -config MACH_SMDK6400 - bool "SMDK6400" - depends on ATAGS && UNUSED_BOARD_FILES - select CPU_S3C6400 - select S3C64XX_SETUP_SDHCI - select S3C_DEV_HSMMC1 - help - Machine support for the Samsung SMDK6400 - -# S3C6410 machine support - -config MACH_ANW6410 - bool "A&W6410" - depends on ATAGS && UNUSED_BOARD_FILES - select CPU_S3C6410 - select S3C64XX_SETUP_FB_24BPP - select S3C_DEV_FB - help - Machine support for the A&W6410 - -config MACH_MINI6410 - bool "MINI6410" - depends on ATAGS && UNUSED_BOARD_FILES - select CPU_S3C6410 - select S3C64XX_SETUP_FB_24BPP - select S3C64XX_SETUP_SDHCI - select S3C_DEV_FB - select S3C_DEV_HSMMC - select S3C_DEV_HSMMC1 - select S3C_DEV_NAND - select S3C_DEV_USB_HOST - select SAMSUNG_DEV_ADC - select SAMSUNG_DEV_TS - help - Machine support for the FriendlyARM MINI6410 - -config MACH_REAL6410 - bool "REAL6410" - depends on ATAGS && UNUSED_BOARD_FILES - select CPU_S3C6410 - select S3C64XX_SETUP_FB_24BPP - select S3C64XX_SETUP_SDHCI - select S3C_DEV_FB - select S3C_DEV_HSMMC - select S3C_DEV_HSMMC1 - select S3C_DEV_NAND - select S3C_DEV_USB_HOST - select SAMSUNG_DEV_ADC - select SAMSUNG_DEV_TS - help - Machine support for the CoreWind REAL6410 - -config MACH_SMDK6410 - bool "SMDK6410" - depends on ATAGS && UNUSED_BOARD_FILES - select CPU_S3C6410 - select S3C64XX_SETUP_FB_24BPP - select S3C64XX_SETUP_I2C1 - select S3C64XX_SETUP_IDE - select S3C64XX_SETUP_KEYPAD - select S3C64XX_SETUP_SDHCI - select S3C64XX_SETUP_USB_PHY - select S3C_DEV_FB - select S3C_DEV_HSMMC - select S3C_DEV_HSMMC1 - select S3C_DEV_I2C1 - select S3C_DEV_RTC - select S3C_DEV_USB_HOST - select S3C_DEV_USB_HSOTG - select S3C_DEV_WDT - select SAMSUNG_DEV_ADC - select SAMSUNG_DEV_BACKLIGHT - select SAMSUNG_DEV_IDE - select SAMSUNG_DEV_KEYPAD - select SAMSUNG_DEV_PWM - select SAMSUNG_DEV_TS - help - Machine support for the Samsung SMDK6410 - -# At least some of the SMDK6410s were shipped with the card detect -# for the MMC/SD slots connected to the same input. This means that -# either the boards need to be altered to have channel0 to an alternate -# configuration or that only one slot can be used. - -choice - prompt "SMDK6410 MMC/SD slot setup" - depends on MACH_SMDK6410 - -config SMDK6410_SD_CH0 - bool "Use channel 0 only" - depends on MACH_SMDK6410 - help - Select CON7 (channel 0) as the MMC/SD slot, as - at least some SMDK6410 boards come with the - resistors fitted so that the card detects for - channels 0 and 1 are the same. - -config SMDK6410_SD_CH1 - bool "Use channel 1 only" - depends on MACH_SMDK6410 - help - Select CON6 (channel 1) as the MMC/SD slot, as - at least some SMDK6410 boards come with the - resistors fitted so that the card detects for - channels 0 and 1 are the same. - -endchoice - -config SMDK6410_WM1190_EV1 - bool "Support Wolfson Microelectronics 1190-EV1 PMIC card" - depends on MACH_SMDK6410 - depends on I2C=y - select MFD_WM8350_I2C - select REGULATOR - select REGULATOR_WM8350 - help - The Wolfson Microelectronics 1190-EV1 is a WM835x based PMIC - and audio daughtercard for the Samsung SMDK6410 reference - platform. Enabling this option will build support for this - module into the kernel. The presence of the module will be - detected at runtime so the resulting kernel can be used - with or without the 1190-EV1 fitted. - -config SMDK6410_WM1192_EV1 - bool "Support Wolfson Microelectronics 1192-EV1 PMIC card" - depends on MACH_SMDK6410 - depends on I2C=y - select MFD_WM831X - select MFD_WM831X_I2C - select REGULATOR - select REGULATOR_WM831X - help - The Wolfson Microelectronics 1192-EV1 is a WM831x based PMIC - daughtercard for the Samsung SMDK6410 reference platform. - Enabling this option will build support for this module into - the kernel. The presence of the daughtercard will be - detected at runtime so the resulting kernel can be used - with or without the 1192-EV1 fitted. - -config MACH_NCP - bool "NCP" - depends on ATAGS && UNUSED_BOARD_FILES - select CPU_S3C6410 - select S3C64XX_SETUP_I2C1 - select S3C_DEV_HSMMC1 - select S3C_DEV_I2C1 - help - Machine support for the Samsung NCP - -config MACH_HMT - bool "Airgoo HMT" - depends on ATAGS && UNUSED_BOARD_FILES - select CPU_S3C6410 - select S3C64XX_SETUP_FB_24BPP - select S3C_DEV_FB - select S3C_DEV_NAND - select S3C_DEV_USB_HOST - select SAMSUNG_DEV_PWM - help - Machine support for the Airgoo HMT - -config MACH_SMARTQ - bool - select CPU_S3C6410 - select S3C64XX_SETUP_FB_24BPP - select S3C64XX_SETUP_SDHCI - select S3C64XX_SETUP_USB_PHY - select S3C_DEV_FB - select S3C_DEV_HSMMC - select S3C_DEV_HSMMC1 - select S3C_DEV_HSMMC2 - select S3C_DEV_HWMON - select S3C_DEV_RTC - select S3C_DEV_USB_HOST - select S3C_DEV_USB_HSOTG - select SAMSUNG_DEV_ADC - select SAMSUNG_DEV_PWM - select SAMSUNG_DEV_TS - help - Shared machine support for SmartQ 5/7 - -config MACH_SMARTQ5 - bool "SmartQ 5" - depends on ATAGS && UNUSED_BOARD_FILES - select MACH_SMARTQ - help - Machine support for the SmartQ 5 - -config MACH_SMARTQ7 - bool "SmartQ 7" - depends on ATAGS && UNUSED_BOARD_FILES - select MACH_SMARTQ - help - Machine support for the SmartQ 7 - config MACH_WLF_CRAGG_6410 bool "Wolfson Cragganmore 6410" depends on ATAGS
arch/arm/mach-s3c/Makefile.s3c64xx +0 -13
@@ -39,20 +39,7 @@ obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio-s3c64xx.o obj-$(CONFIG_S3C64XX_SETUP_SPI) += setup-spi-s3c64xx.o obj-$(CONFIG_S3C64XX_SETUP_USB_PHY) += setup-usb-phy-s3c64xx.o -obj-$(CONFIG_SAMSUNG_DEV_BACKLIGHT) += dev-backlight-s3c64xx.o - # Machine support - -obj-$(CONFIG_MACH_ANW6410) += mach-anw6410.o -obj-$(CONFIG_MACH_HMT) += mach-hmt.o -obj-$(CONFIG_MACH_MINI6410) += mach-mini6410.o -obj-$(CONFIG_MACH_NCP) += mach-ncp.o -obj-$(CONFIG_MACH_REAL6410) += mach-real6410.o -obj-$(CONFIG_MACH_SMARTQ) += mach-smartq.o -obj-$(CONFIG_MACH_SMARTQ5) += mach-smartq5.o -obj-$(CONFIG_MACH_SMARTQ7) += mach-smartq7.o -obj-$(CONFIG_MACH_SMDK6400) += mach-smdk6400.o -obj-$(CONFIG_MACH_SMDK6410) += mach-smdk6410.o obj-$(CONFIG_MACH_WLF_CRAGG_6410) += mach-crag6410.o mach-crag6410-module.o endif
arch/arm/mach-s3c/dev-backlight-s3c64xx.c deleted +0 -0
arch/arm/mach-s3c/mach-anw6410.c deleted +0 -0
arch/arm/mach-s3c/mach-hmt.c deleted +0 -0
arch/arm/mach-s3c/mach-mini6410.c deleted +0 -0
arch/arm/mach-s3c/mach-ncp.c deleted +0 -0
arch/arm/mach-s3c/mach-real6410.c deleted +0 -0
arch/arm/mach-s3c/mach-smartq.c deleted +0 -0
arch/arm/mach-s3c/mach-smartq.h deleted +0 -0
arch/arm/mach-s3c/mach-smartq5.c deleted +0 -0
arch/arm/mach-s3c/mach-smartq7.c deleted +0 -0
arch/arm/mach-s3c/mach-smdk6400.c deleted +0 -0
arch/arm/mach-s3c/mach-smdk6410.c deleted +0 -0
Signature · 1 line
2.29.2
Re: [PATCH 03/21] ARM: s3c: remove most s3c64xx board support
Quoted 5 lines · Arnd Bergmann
From: Arnd Bergmann <[email protected]>
All traditional board files except for
MACH_WLF_CRAGG_6410were marked as unused, so remove them now.
Quoted 7 lines
Cc Kwangwoo Lee <[email protected]>Cc Peter Korsgaard <[email protected]>Cc Darius Augulis <[email protected]>Cc Maurus Cuelenaere <[email protected]>Cc Ben Dooks <[email protected]>Signed-off-by Arnd Bergmann <[email protected]>---
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
PATCH 4/21 ARM: s3c: remove adc.c
In reply to Arnd BergmannFrom: Arnd Bergmann <[email protected]>
This driver could not be enabled on s3c64xx for a long time because of the ARCH_MULTIPLATFORM dependency, so remove it.
--- arch/arm/mach-s3c/Kconfig | 15 - arch/arm/mach-s3c/Kconfig.s3c64xx | 1 - arch/arm/mach-s3c/Makefile | 4 - arch/arm/mach-s3c/adc.c | 510 ---------------------------- arch/arm/mach-s3c/mach-crag6410.c | 1 - arch/arm/mach-s3c/regs-adc.h | 64 ---- include/linux/soc/samsung/s3c-adc.h | 32 -- 7 files changed, 627 deletions(-) delete mode 100644 arch/arm/mach-s3c/adc.c delete mode 100644 arch/arm/mach-s3c/regs-adc.h delete mode 100644 include/linux/soc/samsung/s3c-adc.h
arch/arm/mach-s3c/Kconfig +0 -15
@@ -63,16 +63,6 @@ config S3C_GPIO_TRACK Internal configuration option to enable the s3c specific gpio chip tracking if the platform requires it. -# ADC driver - -config S3C_ADC - bool "ADC common driver support" - depends on !ARCH_MULTIPLATFORM - help - Core support for the ADC block found in the Samsung SoC systems - for drivers such as the touchscreen and hwmon to use to share - this resource. - # device definitions to compile in config S3C_DEV_HSMMC
@@ -165,11 +155,6 @@ config S3C_DEV_RTC help Compile in platform device definition for RTC -config SAMSUNG_DEV_ADC - bool - help - Compile in platform device definition for ADC controller - config S3C64XX_DEV_SPI0 bool help
arch/arm/mach-s3c/Kconfig.s3c64xx +0 -1
@@ -125,7 +125,6 @@ config MACH_WLF_CRAGG_6410 select S3C_DEV_USB_HOST select S3C_DEV_USB_HSOTG select S3C_DEV_WDT - select SAMSUNG_DEV_ADC select SAMSUNG_DEV_KEYPAD select SAMSUNG_DEV_PWM help
arch/arm/mach-s3c/Makefile +0 -4
@@ -8,10 +8,6 @@ include $(src)/Makefile.s3c64xx obj-y += init.o cpu.o -# ADC - -obj-$(CONFIG_S3C_ADC) += adc.o - # devices obj-$(CONFIG_SAMSUNG_ATAGS) += platformdata.o
arch/arm/mach-s3c/adc.c deleted +0 -0
arch/arm/mach-s3c/mach-crag6410.c +0 -1
@@ -57,7 +57,6 @@#include "keypad.h" #include "devs.h" #include "cpu.h" -#include <linux/soc/samsung/s3c-adc.h> #include <linux/platform_data/i2c-s3c2410.h> #include "pm.h"
arch/arm/mach-s3c/regs-adc.h deleted +0 -0
include/linux/soc/samsung/s3c-adc.h deleted +0 -0
Signature · 1 line
2.29.2
Re: [PATCH 04/21] ARM: s3c: remove adc.c
Quoted 4 lines · Arnd Bergmann
From: Arnd Bergmann <[email protected]>
This driver could not be enabled on s3c64xx for a long time because of the
ARCH_MULTIPLATFORMdependency, so remove it.
Re: [PATCH 04/21] ARM: s3c: remove adc.c
In reply to Arnd BergmannQuoted 6 lines · Arnd Bergmann
From: Arnd Bergmann <[email protected]>
This driver could not be enabled on s3c64xx for a long time because of the
ARCH_MULTIPLATFORMdependency, so remove it.Signed-off-by Arnd Bergmann <[email protected]>
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
PATCH 5/21 ARM: s3c: simplify platform code
In reply to Arnd BergmannFrom: Arnd Bergmann <[email protected]>
Following down the now unused symbols and header files, some additional content can be dropped that is used by neither the s3c64xx DT support nor the crag6410 board.
--- arch/arm/mach-s3c/Kconfig | 50 -- arch/arm/mach-s3c/Kconfig.s3c64xx | 5 - arch/arm/mach-s3c/Makefile | 2 - arch/arm/mach-s3c/Makefile.s3c64xx | 1 - arch/arm/mach-s3c/adc-core.h | 24 - arch/arm/mach-s3c/ata-core-s3c64xx.h | 24 - arch/arm/mach-s3c/backlight-s3c64xx.h | 22 - arch/arm/mach-s3c/cpu.h | 47 -- arch/arm/mach-s3c/dev-audio-s3c64xx.c | 127 ---- arch/arm/mach-s3c/devs.c | 725 ------------------- arch/arm/mach-s3c/devs.h | 37 - arch/arm/mach-s3c/dma-s3c64xx.h | 57 -- arch/arm/mach-s3c/dma.h | 2 - arch/arm/mach-s3c/gpio-cfg-helpers.h | 124 ---- arch/arm/mach-s3c/gpio-cfg.h | 19 - arch/arm/mach-s3c/gpio-core.h | 3 - arch/arm/mach-s3c/gpio-samsung.c | 443 +---------- arch/arm/mach-s3c/iic-core.h | 7 - arch/arm/mach-s3c/init.c | 26 +- arch/arm/mach-s3c/map-s3c.h | 37 - arch/arm/mach-s3c/onenand-core-s3c64xx.h | 32 - arch/arm/mach-s3c/otom.h | 25 - arch/arm/mach-s3c/pm-core-s3c64xx.h | 17 - arch/arm/mach-s3c/pm-s3c64xx.c | 83 --- arch/arm/mach-s3c/pm.c | 7 +- arch/arm/mach-s3c/pm.h | 12 - arch/arm/mach-s3c/regs-srom-s3c64xx.h | 55 -- arch/arm/mach-s3c/s3c6400.c | 6 - arch/arm/mach-s3c/s3c6410.c | 9 - arch/arm/mach-s3c/sdhci.h | 25 - arch/arm/mach-s3c/setup-ide-s3c64xx.c | 40 - arch/arm/mach-s3c/sleep-s3c64xx.S | 27 - include/linux/platform_data/media/s5p_hdmi.h | 32 - 33 files changed, 6 insertions(+), 2146 deletions(-) delete mode 100644 arch/arm/mach-s3c/adc-core.h delete mode 100644 arch/arm/mach-s3c/ata-core-s3c64xx.h delete mode 100644 arch/arm/mach-s3c/backlight-s3c64xx.h delete mode 100644 arch/arm/mach-s3c/dma-s3c64xx.h delete mode 100644 arch/arm/mach-s3c/dma.h delete mode 100644 arch/arm/mach-s3c/onenand-core-s3c64xx.h delete mode 100644 arch/arm/mach-s3c/otom.h delete mode 100644 arch/arm/mach-s3c/regs-srom-s3c64xx.h delete mode 100644 arch/arm/mach-s3c/setup-ide-s3c64xx.c delete mode 100644 include/linux/platform_data/media/s5p_hdmi.h
arch/arm/mach-s3c/Kconfig +0 -50
@@ -90,36 +90,6 @@ config S3C_DEV_I2C1 help Compile in platform device definitions for I2C channel 1 -config S3C_DEV_I2C2 - bool - help - Compile in platform device definitions for I2C channel 2 - -config S3C_DEV_I2C3 - bool - help - Compile in platform device definition for I2C controller 3 - -config S3C_DEV_I2C4 - bool - help - Compile in platform device definition for I2C controller 4 - -config S3C_DEV_I2C5 - bool - help - Compile in platform device definition for I2C controller 5 - -config S3C_DEV_I2C6 - bool - help - Compile in platform device definition for I2C controller 6 - -config S3C_DEV_I2C7 - bool - help - Compile in platform device definition for I2C controller 7 - config S3C_DEV_FB bool help
@@ -135,26 +105,6 @@ config S3C_DEV_USB_HSOTG help Compile in platform device definition for USB high-speed OtG -config S3C_DEV_WDT - bool - help - Compile in platform device definition for Watchdog Timer - -config S3C_DEV_NAND - bool - help - Compile in platform device definition for NAND controller - -config S3C_DEV_ONENAND - bool - help - Compile in platform device definition for OneNAND controller - -config S3C_DEV_RTC - bool - help - Compile in platform device definition for RTC - config S3C64XX_DEV_SPI0 bool help
arch/arm/mach-s3c/Kconfig.s3c64xx +0 -5
@@ -15,12 +15,9 @@ menuconfig ARCH_S3C64XX select HAVE_TCM select PLAT_SAMSUNG select PM_GENERIC_DOMAINS if PM - select S3C_DEV_NAND if ATAGS select S3C_GPIO_TRACK if ATAGS - select S3C2410_WATCHDOG select SAMSUNG_ATAGS if ATAGS select SAMSUNG_WAKEMASK if PM - select WATCHDOG help Samsung S3C64XX series based systems
@@ -121,10 +118,8 @@ config MACH_WLF_CRAGG_6410 select S3C_DEV_HSMMC1 select S3C_DEV_HSMMC2 select S3C_DEV_I2C1 - select S3C_DEV_RTC select S3C_DEV_USB_HOST select S3C_DEV_USB_HSOTG - select S3C_DEV_WDT select SAMSUNG_DEV_KEYPAD select SAMSUNG_DEV_PWM help
arch/arm/mach-s3c/Makefile +0 -2
@@ -11,7 +11,6 @@ obj-y += init.o cpu.o # devices obj-$(CONFIG_SAMSUNG_ATAGS) += platformdata.o - obj-$(CONFIG_SAMSUNG_ATAGS) += devs.o obj-$(CONFIG_SAMSUNG_ATAGS) += dev-uart.o
@@ -21,5 +20,4 @@ obj-$(CONFIG_GPIO_SAMSUNG) += gpio-samsung.o obj-$(CONFIG_SAMSUNG_PM) += pm.o pm-common.o obj-$(CONFIG_SAMSUNG_PM_GPIO) += pm-gpio.o - obj-$(CONFIG_SAMSUNG_WAKEMASK) += wakeup-mask.o
arch/arm/mach-s3c/Makefile.s3c64xx +0 -1
@@ -33,7 +33,6 @@ obj-y += dev-audio-s3c64xx.o obj-$(CONFIG_S3C64XX_SETUP_FB_24BPP) += setup-fb-24bpp-s3c64xx.o obj-$(CONFIG_S3C64XX_SETUP_I2C0) += setup-i2c0-s3c64xx.o obj-$(CONFIG_S3C64XX_SETUP_I2C1) += setup-i2c1-s3c64xx.o -obj-$(CONFIG_S3C64XX_SETUP_IDE) += setup-ide-s3c64xx.o obj-$(CONFIG_S3C64XX_SETUP_KEYPAD) += setup-keypad-s3c64xx.o obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio-s3c64xx.o obj-$(CONFIG_S3C64XX_SETUP_SPI) += setup-spi-s3c64xx.o
arch/arm/mach-s3c/adc-core.h deleted +0 -0
arch/arm/mach-s3c/ata-core-s3c64xx.h deleted +0 -0
arch/arm/mach-s3c/backlight-s3c64xx.h deleted +0 -0
arch/arm/mach-s3c/cpu.h +0 -47
87 lines not on this page · raw message
arch/arm/mach-s3c/dev-audio-s3c64xx.c +0 -127
130 lines not on this page · raw message
arch/arm/mach-s3c/devs.c +0 -725
793 lines not on this page · raw message
arch/arm/mach-s3c/devs.h +0 -37
@@ -25,60 +25,23 @@ extern struct s3c24xx_uart_resources s3c64xx_uart_resources[];extern struct platform_device *s3c24xx_uart_devs[];extern struct platform_device *s3c24xx_uart_src[]; -extern struct platform_device s3c64xx_device_ac97;extern struct platform_device s3c64xx_device_iis0;extern struct platform_device s3c64xx_device_iis1; -extern struct platform_device s3c64xx_device_iisv4; -extern struct platform_device s3c64xx_device_onenand1; -extern struct platform_device s3c64xx_device_pcm0; -extern struct platform_device s3c64xx_device_pcm1;extern struct platform_device s3c64xx_device_spi0; -extern struct platform_device s3c_device_adc; -extern struct platform_device s3c_device_cfcon;extern struct platform_device s3c_device_fb; -extern struct platform_device s3c_device_hwmon;extern struct platform_device s3c_device_hsmmc0;extern struct platform_device s3c_device_hsmmc1;extern struct platform_device s3c_device_hsmmc2;extern struct platform_device s3c_device_hsmmc3;extern struct platform_device s3c_device_i2c0;extern struct platform_device s3c_device_i2c1; -extern struct platform_device s3c_device_i2c2; -extern struct platform_device s3c_device_i2c3; -extern struct platform_device s3c_device_i2c4; -extern struct platform_device s3c_device_i2c5; -extern struct platform_device s3c_device_i2c6; -extern struct platform_device s3c_device_i2c7; -extern struct platform_device s3c_device_iis; -extern struct platform_device s3c_device_lcd; -extern struct platform_device s3c_device_nand;extern struct platform_device s3c_device_ohci; -extern struct platform_device s3c_device_onenand; -extern struct platform_device s3c_device_rtc; -extern struct platform_device s3c_device_sdi; -extern struct platform_device s3c_device_spi0; -extern struct platform_device s3c_device_spi1; -extern struct platform_device s3c_device_ts; -extern struct platform_device s3c_device_timer[]; -extern struct platform_device s3c_device_usbgadget;extern struct platform_device s3c_device_usb_hsotg; -extern struct platform_device s3c_device_usb_hsudc; -extern struct platform_device s3c_device_wdt; -extern struct platform_device samsung_asoc_idma;extern struct platform_device samsung_device_keypad;extern struct platform_device samsung_device_pwm; -/* s3c2440 specific devices */ - -#ifdef CONFIG_CPU_S3C2440 - -extern struct platform_device s3c_device_camif; -extern struct platform_device s3c_device_ac97; - -#endif -/** * s3c_set_platdata() - helper for setting platform data * @pd: The default platform data for this device.
arch/arm/mach-s3c/dma-s3c64xx.h deleted +0 -0
arch/arm/mach-s3c/dma.h deleted +0 -0
arch/arm/mach-s3c/gpio-cfg-helpers.h +0 -124
134 lines not on this page · raw message
arch/arm/mach-s3c/gpio-cfg.h +0 -19
@@ -94,17 +94,6 @@ struct samsung_gpio_cfg {*/ extern int s3c_gpio_cfgpin (unsigned int pin,unsigned int to); -/** -* s3c_gpio_getcfg - Read the current function for a GPIO pin -* @pin: The pin to read the configuration value for. -* -* Read the configuration state of the given @pin, returning a value that -* could be passed back to s3c_gpio_cfgpin(). -* -* @sa s3c_gpio_cfgpin -*/ -extern unsigned s3c_gpio_getcfg (unsigned int pin); -/** * s3c_gpio_cfgpin_range() - Change the GPIO function for configuring pin range * @start: The pin number to start at
@@ -142,14 +131,6 @@ extern int s3c_gpio_cfgpin_range(unsigned int start, unsigned int nr,*/ extern int s3c_gpio_setpull (unsigned int pin,samsung_gpio_pull_t pull); -/** -* s3c_gpio_getpull() - get the pull resistor state of a gpio pin -* @pin: The pin number to get the settings for -* -* Read the pull resistor value for the specified pin. -*/ -extern samsung_gpio_pull_t s3c_gpio_getpull (unsigned int pin); -/* configure `all` aspects of an gpio */ /**
arch/arm/mach-s3c/gpio-core.h +0 -3
@@ -93,9 +93,6 @@ static inline struct samsung_gpio_chip *to_samsung_gpio(struct gpio_chip *gpc)*/ extern int samsung_gpiolib_to_irq (struct gpio_chip *chip,unsigned int offset); -/* exported for core SoC support to change */ -extern struct samsung_gpio_cfg s3c24xx_gpiocfg_default; -#ifdef CONFIG_S3C_GPIO_TRACK extern struct samsung_gpio_chip *s3c_gpios[S3C_GPIO_END ];
arch/arm/mach-s3c/gpio-samsung.c +3 -440
544 lines not on this page · raw message
arch/arm/mach-s3c/iic-core.h +0 -7
@@ -28,11 +28,4 @@ static inline void s3c_i2c1_setname(char *name) #endif } -static inline void s3c_i2c2_setname (char *name) -{ -#ifdef CONFIG_S3C_DEV_I2C2 - s3c_device_i2c2.name = name; -#endif -} -#endif /* __ASM_ARCH_IIC_H */
arch/arm/mach-s3c/init.c +1 -25
@@ -63,29 +63,6 @@ void __init s3c_init_cpu(unsigned long idcode,pr_err ("The platform is deprecated and scheduled for removal. Please reach to the maintainers of the platform and [email protected] if you still use it. Without such feedback, the platform will be removed after 2022.\n" ); } -/* s3c24xx_init_clocks -* -* Initialise the clock subsystem and associated information from the -* given master crystal value. -* -* xtal = 0 -> use default PLL crystal value (normally 12MHz) -* != 0 -> PLL crystal value in Hz -*/ - -void __init s3c24xx_init_clocks (int xtal) -{ -if (xtal ==0 ) - xtal =12 *1000 *1000 ; - -if (cpu ==NULL ) -panic ("s3c24xx_init_clocks: no cpu setup?\n" ); - -if (cpu->init_clocks ==NULL ) -panic ("s3c24xx_init_clocks: cpu has no clock init\n" ); -else - (cpu->init_clocks)(xtal); -} -/* uart management */ #if IS_ENABLED (CONFIG_SAMSUNG_ATAGS )static int nr_uarts__initdata =0 ;
@@ -150,8 +127,7 @@ static int __init s3c_arch_init(void)int ret;/* init is only needed for ATAGS based platforms */ -if (!IS_ENABLED (CONFIG_ATAGS ) || - (!soc_is_s3c24xx () && !soc_is_s3c64xx ())) +if (!IS_ENABLED (CONFIG_ATAGS ))return 0 ;// do the correct init for cpu
arch/arm/mach-s3c/map-s3c.h +0 -37
@@ -11,20 +11,6 @@#include "map.h" -#define S3C24XX_VA_IRQ S3C_VA_IRQ -#define S3C24XX_VA_MEMCTRL S3C_VA_MEM -#define S3C24XX_VA_UART S3C_VA_UART - -#define S3C24XX_VA_TIMER S3C_VA_TIMER -#define S3C24XX_VA_CLKPWR S3C_VA_SYS -#define S3C24XX_VA_WATCHDOG S3C_VA_WATCHDOG - -#define S3C2412_VA_SSMC S3C_ADDR_CPU(0x00000000) -#define S3C2412_VA_EBI S3C_ADDR_CPU(0x00100000) - -#define S3C2410_PA_UART (0x50000000) -#define S3C24XX_PA_UART S3C2410_PA_UART -/* * GPIO ports *
@@ -35,11 +21,6 @@* 0xFA800000, which is not in the way of any current mapping * by the base system. */ - -#define S3C2410_PA_GPIO (0x56000000) -#define S3C24XX_PA_GPIO S3C2410_PA_GPIO - -#define S3C24XX_VA_GPIO ((S3C24XX_PA_GPIO - S3C24XX_PA_UART) + S3C24XX_VA_UART)#define S3C64XX_VA_GPIO S3C_ADDR_CPU(0x00000000)#define S3C64XX_VA_MODEM S3C_ADDR_CPU(0x00100000)
@@ -47,24 +28,6 @@#define S3C_VA_USB_HSPHY S3C64XX_VA_USB_HSPHY -#define S3C2410_ADDR (x) S3C_ADDR(x) - -/* deal with the registers that move under the 2412/2413 */ - -#if defined(CONFIG_CPU_S3C2412 ) -#ifndef __ASSEMBLY__ -extern void __iomem *s3c24xx_va_gpio2; -#endif -#ifdef CONFIG_CPU_S3C2412_ONLY -#define S3C24XX_VA_GPIO2 (S3C24XX_VA_GPIO + 0x10) -#else -#define S3C24XX_VA_GPIO2 s3c24xx_va_gpio2 -#endif -#else -#define s3c24xx_va_gpio2 S3C24XX_VA_GPIO -#define S3C24XX_VA_GPIO2 S3C24XX_VA_GPIO -#endif -#include "map-s5p.h" #endif /* __ASM_PLAT_MAP_S3C_H */
arch/arm/mach-s3c/onenand-core-s3c64xx.h deleted +0 -0
arch/arm/mach-s3c/otom.h deleted +0 -0
arch/arm/mach-s3c/pm-core-s3c64xx.h +0 -17
@@ -20,23 +20,6 @@static inline void s3c_pm_debug_init_uart (void ) { -#ifdef CONFIG_SAMSUNG_PM_DEBUG -u32 tmp =__raw_readl (S3C_PCLK_GATE ); - -/* As a note, since the S3C64XX UARTs generally have multiple -* clock sources, we simply enable PCLK at the moment and hope -* that the resume settings for the UART are suitable for the -* use with PCLK. -*/ - - tmp |=S3C_CLKCON_PCLK_UART0 ; - tmp |=S3C_CLKCON_PCLK_UART1 ; - tmp |=S3C_CLKCON_PCLK_UART2 ; - tmp |=S3C_CLKCON_PCLK_UART3 ; - -__raw_writel (tmp,S3C_PCLK_GATE ); -udelay (10 ); -#endif }static inline void s3c_pm_arch_prepare_irqs (void )
arch/arm/mach-s3c/pm-s3c64xx.c +0 -83
113 lines not on this page · raw message
arch/arm/mach-s3c/pm.c +2 -5
@@ -100,7 +100,7 @@ static int s3c_pm_enter(suspend_state_t state)samsung_pm_saved_gpios (); } -s3c_pm_save_uarts (soc_is_s3c2410 ()); +s3c_pm_save_uarts (false);s3c_pm_save_core ();/* set the irq configuration for wake */
@@ -137,7 +137,7 @@ static int s3c_pm_enter(suspend_state_t state)/* restore the system state */ s3c_pm_restore_core (); -s3c_pm_restore_uarts (soc_is_s3c2410 ()); +s3c_pm_restore_uarts (false);if (!of_have_populated_dt ()) {samsung_pm_restore_gpios ();
@@ -152,9 +152,6 @@ static int s3c_pm_enter(suspend_state_t state)S3C_PMDBG ("%s: post sleep, preparing to return\n" , __func__); -/* LEDs should now be 1110 */ -s3c_pm_debug_smdkled (1 <<1 ,0 ); -s3c_pm_check_restore ();/* ok, let's return from sleep */
arch/arm/mach-s3c/pm.h +0 -12
@@ -64,18 +64,6 @@ extern int s3c_irqext_wake(struct irq_data *data, unsigned int state);#define s3c_irqext_wake NULL#endif -#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK -/** -* s3c_pm_debug_smdkled() - Debug PM suspend/resume via SMDK Board LEDs -* @set: set bits for the state of the LEDs -* @clear: clear bits for the state of the LEDs. -*/ -extern void s3c_pm_debug_smdkled (u32 set,u32 clear); - -#else -static inline void s3c_pm_debug_smdkled (u32 set,u32 clear) { } -#endif /* CONFIG_S3C_PM_DEBUG_LED_SMDK */ -/** * s3c_pm_configure_extint() - ensure pins are correctly set for IRQ *
arch/arm/mach-s3c/regs-srom-s3c64xx.h deleted +0 -0
arch/arm/mach-s3c/s3c6400.c +0 -6
@@ -36,7 +36,6 @@#include "iic-core.h" #include "s3c64xx.h" -#include "onenand-core-s3c64xx.h" void __init s3c6400_map_io (void ) {
@@ -48,11 +47,6 @@ void __init s3c6400_map_io(void)/* the i2c devices are directly compatible with s3c2440 */ s3c_i2c0_setname ("s3c2440-i2c" ); - - s3c_device_nand.name ="s3c6400-nand" ; - -s3c_onenand_setname ("s3c6400-onenand" ); -s3c64xx_onenand1_setname ("s3c6400-onenand" ); }void __init s3c6400_init_irq (void )
arch/arm/mach-s3c/s3c6410.c +0 -9
@@ -35,12 +35,9 @@#include "cpu.h" #include "devs.h" #include "sdhci.h" -#include "adc-core.h" #include "iic-core.h" -#include "ata-core-s3c64xx.h" #include "s3c64xx.h" -#include "onenand-core-s3c64xx.h" void __init s3c6410_map_io (void ) {
@@ -52,12 +49,6 @@ void __init s3c6410_map_io(void)/* the i2c devices are directly compatible with s3c2440 */ s3c_i2c0_setname ("s3c2440-i2c" );s3c_i2c1_setname ("s3c2440-i2c" ); - -s3c_adc_setname ("s3c64xx-adc" ); - s3c_device_nand.name ="s3c6400-nand" ; -s3c_onenand_setname ("s3c6410-onenand" ); -s3c64xx_onenand1_setname ("s3c6410-onenand" ); -s3c_cfcon_setname ("s3c64xx-pata" ); }void __init s3c6410_init_irq (void )
arch/arm/mach-s3c/sdhci.h +0 -25
@@ -48,35 +48,10 @@ extern struct s3c_sdhci_platdata s3c_hsmmc3_def_platdata;/* Helper function availability */ -extern void s3c2416_setup_sdhci0_cfg_gpio (struct platform_device *,int w); -extern void s3c2416_setup_sdhci1_cfg_gpio (struct platform_device *,int w);extern void s3c64xx_setup_sdhci0_cfg_gpio (struct platform_device *,int w);extern void s3c64xx_setup_sdhci1_cfg_gpio (struct platform_device *,int w);extern void s3c64xx_setup_sdhci2_cfg_gpio (struct platform_device *,int w); -/* S3C2416 SDHCI setup */ - -#ifdef CONFIG_S3C2416_SETUP_SDHCI -static inline void s3c2416_default_sdhci0 (void ) -{ -#ifdef CONFIG_S3C_DEV_HSMMC - s3c_hsmmc0_def_platdata.cfg_gpio = s3c2416_setup_sdhci0_cfg_gpio; -#endif /* CONFIG_S3C_DEV_HSMMC */ -} - -static inline void s3c2416_default_sdhci1 (void ) -{ -#ifdef CONFIG_S3C_DEV_HSMMC1 - s3c_hsmmc1_def_platdata.cfg_gpio = s3c2416_setup_sdhci1_cfg_gpio; -#endif /* CONFIG_S3C_DEV_HSMMC1 */ -} - -#else -static inline void s3c2416_default_sdhci0 (void ) { } -static inline void s3c2416_default_sdhci1 (void ) { } - -#endif /* CONFIG_S3C2416_SETUP_SDHCI */ -/* S3C64XX SDHCI setup */ #ifdef CONFIG_S3C64XX_SETUP_SDHCI
arch/arm/mach-s3c/setup-ide-s3c64xx.c deleted +0 -0
arch/arm/mach-s3c/sleep-s3c64xx.S +0 -27
@@ -39,31 +39,4 @@ ENTRY(s3c_cpu_resume) msr cpsr_c, #PSR_I_BIT | PSR_F_BIT | SVC_MODE ldr r2, =LL_UART /* for debug */ - -#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK - -#define S3C64XX_GPNCON (S3C64XX_GPN_BASE + 0x00) -#define S3C64XX_GPNDAT (S3C64XX_GPN_BASE + 0x04) - -#define S3C64XX_GPN_CONMASK(__gpio) (0x3 << ((__gpio) * 2)) -#define S3C64XX_GPN_OUTPUT(__gpio) (0x1 << ((__gpio) * 2)) - - /* Initialise the GPIO state if we are debugging via the SMDK LEDs, - * as the uboot version supplied resets these to inputs during the - * resume checks. - */ - - ldr r3, =S3C64XX_PA_GPIO - ldr r0, [ r3, #S3C64XX_GPNCON ] - bic r0, r0, #(S3C64XX_GPN_CONMASK(12) | S3C64XX_GPN_CONMASK(13) | \ - S3C64XX_GPN_CONMASK(14) | S3C64XX_GPN_CONMASK(15)) - orr r0, r0, #(S3C64XX_GPN_OUTPUT(12) | S3C64XX_GPN_OUTPUT(13) | \ - S3C64XX_GPN_OUTPUT(14) | S3C64XX_GPN_OUTPUT(15)) - str r0, [ r3, #S3C64XX_GPNCON ] - - ldr r0, [ r3, #S3C64XX_GPNDAT ] - bic r0, r0, #0xf << 12 @ GPN12..15 - orr r0, r0, #1 << 15 @ GPN15 - str r0, [ r3, #S3C64XX_GPNDAT ] -#endif b cpu_resume
include/linux/platform_data/media/s5p_hdmi.h deleted +0 -0
Signature · 7 lines
2.29.2 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Re: [PATCH 05/21] ARM: s3c: simplify platform code
Quoted 5 lines · Arnd Bergmann
From: Arnd Bergmann <[email protected]>
Following down the now unused symbols and header files, some additional content can be dropped that is used by neither the s3c64xx DT support nor the crag6410 board.
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Re: [PATCH 05/21] ARM: s3c: simplify platform code
In reply to Arnd BergmannQuoted 126 lines · Arnd Bergmann
From: Arnd Bergmann <[email protected]>
Following down the now unused symbols and header files, some additional content can be dropped that is used by neither the s3c64xx DT support nor the crag6410 board.
Signed-off-by Arnd Bergmann <[email protected]>--- arch/arm/mach-s3c/Kconfig | 50 -- arch/arm/mach-s3c/Kconfig.s3c64xx | 5 - arch/arm/mach-s3c/Makefile | 2 - arch/arm/mach-s3c/Makefile.s3c64xx | 1 - arch/arm/mach-s3c/adc-core.h | 24 - arch/arm/mach-s3c/ata-core-s3c64xx.h | 24 - arch/arm/mach-s3c/backlight-s3c64xx.h | 22 - arch/arm/mach-s3c/cpu.h | 47 -- arch/arm/mach-s3c/dev-audio-s3c64xx.c | 127 ---- arch/arm/mach-s3c/devs.c | 725 ------------------- arch/arm/mach-s3c/devs.h | 37 - arch/arm/mach-s3c/dma-s3c64xx.h | 57 -- arch/arm/mach-s3c/dma.h | 2 - arch/arm/mach-s3c/gpio-cfg-helpers.h | 124 ---- arch/arm/mach-s3c/gpio-cfg.h | 19 - arch/arm/mach-s3c/gpio-core.h | 3 - arch/arm/mach-s3c/gpio-samsung.c | 443 +---------- arch/arm/mach-s3c/iic-core.h | 7 - arch/arm/mach-s3c/init.c | 26 +- arch/arm/mach-s3c/map-s3c.h | 37 - arch/arm/mach-s3c/onenand-core-s3c64xx.h | 32 - arch/arm/mach-s3c/otom.h | 25 - arch/arm/mach-s3c/pm-core-s3c64xx.h | 17 - arch/arm/mach-s3c/pm-s3c64xx.c | 83 --- arch/arm/mach-s3c/pm.c | 7 +- arch/arm/mach-s3c/pm.h | 12 - arch/arm/mach-s3c/regs-srom-s3c64xx.h | 55 -- arch/arm/mach-s3c/s3c6400.c | 6 - arch/arm/mach-s3c/s3c6410.c | 9 - arch/arm/mach-s3c/sdhci.h | 25 - arch/arm/mach-s3c/setup-ide-s3c64xx.c | 40 - arch/arm/mach-s3c/sleep-s3c64xx.S | 27 - include/linux/platform_data/media/s5p_hdmi.h | 32 - 33 files changed, 6 insertions(+), 2146 deletions(-) delete mode 100644 arch/arm/mach-s3c/adc-core.h delete mode 100644 arch/arm/mach-s3c/ata-core-s3c64xx.h delete mode 100644 arch/arm/mach-s3c/backlight-s3c64xx.h delete mode 100644 arch/arm/mach-s3c/dma-s3c64xx.h delete mode 100644 arch/arm/mach-s3c/dma.h delete mode 100644 arch/arm/mach-s3c/onenand-core-s3c64xx.h delete mode 100644 arch/arm/mach-s3c/otom.h delete mode 100644 arch/arm/mach-s3c/regs-srom-s3c64xx.h delete mode 100644 arch/arm/mach-s3c/setup-ide-s3c64xx.c delete mode 100644 include/linux/platform_data/media/s5p_hdmi.harch/arm/mach-s3c/Kconfig +0
-50@@ -90,36 +90,6 @@ config S3C_DEV_I2C1 help Compile in platform device definitions for I2C channel 1 -config S3C_DEV_I2C2 - bool - help - Compile in platform device definitions for I2C channel 2 - -config S3C_DEV_I2C3 - bool - help - Compile in platform device definition for I2C controller 3 - -config S3C_DEV_I2C4 - bool - help - Compile in platform device definition for I2C controller 4 - -config S3C_DEV_I2C5 - bool - help - Compile in platform device definition for I2C controller 5 - -config S3C_DEV_I2C6 - bool - help - Compile in platform device definition for I2C controller 6 - -config S3C_DEV_I2C7 - bool - help - Compile in platform device definition for I2C controller 7 - config S3C_DEV_FB bool help@@ -135,26 +105,6 @@ config S3C_DEV_USB_HSOTG help Compile in platform device definition for USB high-speed OtG -config S3C_DEV_WDT - bool - help - Compile in platform device definition for Watchdog Timer - -config S3C_DEV_NAND - bool - help - Compile in platform device definition for NAND controller - -config S3C_DEV_ONENAND - bool - help - Compile in platform device definition for OneNAND controller - -config S3C_DEV_RTC - bool - help - Compile in platform device definition for RTC - config S3C64XX_DEV_SPI0 bool helparch/arm/mach-s3c/Kconfig.s3c64xx +0
-0
arch/arm/mach-s3c/Kconfig.s3c64xx menuconfig ARCH_S3C64XX · line 20
Quoted 6 lines
arch/arm/mach-s3c/Kconfig.s3c64xx +0
-2@@ -15,12 +15,9 @@ menuconfig ARCH_S3C64XX select HAVE_TCM select PLAT_SAMSUNG select PM_GENERIC_DOMAINS if PM - select S3C_DEV_NAND if ATAGS select S3C_GPIO_TRACK if ATAGS - select S3C2410_WATCHDOG
This does not seem right. S3C2410_WATCHDOG is a driver used by all (including Exynos) platforms.
arch/arm/mach-s3c/Kconfig.s3c64xx config MACH_WLF_CRAGG_6410 · line 124
Quoted 11 lines
arch/arm/mach-s3c/Kconfig.s3c64xx +0
-2select SAMSUNG_ATAGS if ATAGS select SAMSUNG_WAKEMASK if PM - select WATCHDOG help Samsung S3C64XX series based systems@@ -121,10 +118,8 @@ config MACH_WLF_CRAGG_6410 select S3C_DEV_HSMMC1 select S3C_DEV_HSMMC2 select S3C_DEV_I2C1 - select S3C_DEV_RTC
This as well.
arch/arm/mach-s3c/Kconfig.s3c64xx config MACH_WLF_CRAGG_6410 · line 125
Quoted 6 lines
arch/arm/mach-s3c/Kconfig.s3c64xx +0
-1select S3C_DEV_USB_HOST select S3C_DEV_USB_HSOTG - select S3C_DEV_WDT select SAMSUNG_DEV_KEYPAD select SAMSUNG_DEV_PWM help
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Arnd Bergmann
maintainerRe: [PATCH 05/21] ARM: s3c: simplify platform code
Quoted 6 lines · Krzysztof Kozlowski
Quoted 6 lines
arch/arm/mach-s3c/Kconfig.s3c64xx +0
-0@@ -15,12 +15,9 @@ menuconfig ARCH_S3C64XX select HAVE_TCM
Quoted 8 lines
arch/arm/mach-s3c/Kconfig.s3c64xx menuconfig ARCH_S3C64XX · line 20
Quoted 5 lines
arch/arm/mach-s3c/Kconfig.s3c64xx +0
-2select PLAT_SAMSUNG select PM_GENERIC_DOMAINS if PM - select S3C_DEV_NAND if ATAGS select S3C_GPIO_TRACK if ATAGS - select S3C2410_WATCHDOGThis does not seem right.
S3C2410_WATCHDOGis a driver used by all (including Exynos) platforms.
I don't remember why I removed this line, probably because I removed S3C_DEV_WDT after there are no references to that symbol left in board files. The watchdog driver is now DT-only with cragg6410 being the last remaining board file.
Ideally we should not 'select' it from here but instead have it enabled in the defconfig file, but I agree that would be something to do in a separate patch, while the patch here should not change the behavior. I'll revert this part.
Quoted 7 lines
arch/arm/mach-s3c/Kconfig.s3c64xx config MACH_WLF_CRAGG_6410 · line 124
Quoted 5 lines
arch/arm/mach-s3c/Kconfig.s3c64xx +0
-1@@ -121,10 +118,8 @@ config MACH_WLF_CRAGG_6410 select S3C_DEV_HSMMC1 select S3C_DEV_HSMMC2 select S3C_DEV_I2C1 - select S3C_DEV_RTCThis as well.
I'm fairly sure this can be removed along with S3C_DEV_WDT, S3C_DEV_I2C[2-7], S3C_DEV_NAND, and S3C_DEV_ONENAND as I remove the symbols due to the lack of references from cragg6410.
I folded in this fixup now:
arch/arm/mach-s3c/Kconfig.s3c64xx +2 -0
@@ -16,8 +16,10 @@ menuconfig ARCH_S3C64XX select PLAT_SAMSUNG select PM_GENERIC_DOMAINS if PM select S3C_GPIO_TRACK if ATAGS + select S3C2410_WATCHDOG select SAMSUNG_ATAGS if ATAGS select SAMSUNG_WAKEMASK if PM + select WATCHDOG help Samsung S3C64XX series based systems
Arnd
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Re: [PATCH 05/21] ARM: s3c: simplify platform code
Quoted 35 lines · Arnd Bergmann
Quoted 6 lines · Krzysztof Kozlowski
Quoted 6 lines
arch/arm/mach-s3c/Kconfig.s3c64xx +0
-0@@ -15,12 +15,9 @@ menuconfig ARCH_S3C64XX select HAVE_TCMQuoted 8 lines
arch/arm/mach-s3c/Kconfig.s3c64xx menuconfig ARCH_S3C64XX
Quoted 5 lines
arch/arm/mach-s3c/Kconfig.s3c64xx +0
-2select PLAT_SAMSUNG select PM_GENERIC_DOMAINS if PM - select S3C_DEV_NAND if ATAGS select S3C_GPIO_TRACK if ATAGS - select S3C2410_WATCHDOGThis does not seem right.
S3C2410_WATCHDOGis a driver used by all (including Exynos) platforms.I don't remember why I removed this line, probably because I removed
S3C_DEV_WDTafter there are no references to that symbol left in board files. The watchdog driver is now DT-only with cragg6410 being the last remaining board file.Ideally we should not 'select' it from here but instead have it enabled in the defconfig file, but I agree that would be something to do in a separate patch, while the patch here should not change the behavior. I'll revert this part.
Quoted 7 lines
arch/arm/mach-s3c/Kconfig.s3c64xx config MACH_WLF_CRAGG_6410 · line 124
Quoted 5 lines
arch/arm/mach-s3c/Kconfig.s3c64xx +0
-1@@ -121,10 +118,8 @@ config MACH_WLF_CRAGG_6410 select S3C_DEV_HSMMC1 select S3C_DEV_HSMMC2 select S3C_DEV_I2C1 - select S3C_DEV_RTCThis as well.
Quoted 4 lines
I'm fairly sure this can be removed along with
S3C_DEV_WDT, S3C_DEV_I2C[2-7],S3C_DEV_NAND, andS3C_DEV_ONENANDas I remove the symbols due to the lack of references from cragg6410.
Yes, you are right. This can be dropped.
arch/arm/mach-s3c/Kconfig.s3c64xx menuconfig ARCH_S3C64XX · line 22
Quoted 13 lines
I folded in this fixup now:
arch/arm/mach-s3c/Kconfig.s3c64xx +2
-0@@ -16,8 +16,10 @@ menuconfig ARCH_S3C64XX select PLAT_SAMSUNG select PM_GENERIC_DOMAINS if PM select S3C_GPIO_TRACK if ATAGS + select S3C2410_WATCHDOG select SAMSUNG_ATAGS if ATAGS select SAMSUNG_WAKEMASK if PM + select WATCHDOG
Looks ok.
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
PATCH 6/21 ARM: s3c: remove s3c6400 support
In reply to Arnd BergmannFrom: Arnd Bergmann <[email protected]>
No board file and no dts file references the s3c6400 now, it's only s3c6410, so remove the final bits as well.
--- arch/arm/mach-s3c/Makefile.s3c64xx | 1 - arch/arm/mach-s3c/s3c6400.c | 84 ------------------------------ arch/arm/mach-s3c/s3c64xx.c | 8 --- 3 files changed, 93 deletions(-) delete mode 100644 arch/arm/mach-s3c/s3c6400.c
arch/arm/mach-s3c/Makefile.s3c64xx +0 -1
@@ -16,7 +16,6 @@ obj-$(CONFIG_PM_SLEEP) += irq-pm-s3c64xx.o # Core obj-y += s3c64xx.o -obj-$(CONFIG_CPU_S3C6400) += s3c6400.o obj-$(CONFIG_CPU_S3C6410) += s3c6410.o # DMA support
arch/arm/mach-s3c/s3c6400.c deleted +0 -0
arch/arm/mach-s3c/s3c64xx.c +0 -8
@@ -72,18 +72,10 @@ static void __init s3c64xx_init_uarts(struct s3c2410_uartcfg *cfg, int no)/* table of supported CPUs */ -static const char name_s3c6400[] ="S3C6400" ;static const char name_s3c6410[] ="S3C6410" ;static struct cpu_table cpu_ids[]__initdata = { { - .idcode =S3C6400_CPU_ID , - .idmask =S3C64XX_CPU_MASK , - .map_io = s3c6400_map_io, - .init_uarts = s3c64xx_init_uarts, - .init = s3c6400_init, - .name = name_s3c6400, - }, { .idcode =S3C6410_CPU_ID , .idmask =S3C64XX_CPU_MASK , .map_io = s3c6410_map_io,
Signature · 7 lines
2.29.2 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Re: [PATCH 06/21] ARM: s3c: remove s3c6400 support
Quoted 5 lines · Arnd Bergmann
From: Arnd Bergmann <[email protected]>
No board file and no dts file references the s3c6400 now, it's only s3c6410, so remove the final bits as well.
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
PATCH 7/21 power: remove s3c adc battery driver
In reply to Arnd BergmannFrom: Arnd Bergmann <[email protected]>
The s3c-adc driver is removed along with the s3c24xx platform, so the battery driver is no longer needed either.
--- MAINTAINERS | 7 - drivers/power/supply/Kconfig | 6 - drivers/power/supply/Makefile | 1 - drivers/power/supply/s3c_adc_battery.c | 453 ------------------------- include/linux/s3c_adc_battery.h | 39 --- 5 files changed, 506 deletions(-) delete mode 100644 drivers/power/supply/s3c_adc_battery.c delete mode 100644 include/linux/s3c_adc_battery.h
MAINTAINERS +0 -7
@@ -17920,13 +17920,6 @@ S: Supported W: http://www.ibm.com/developerworks/linux/linux390/ F: drivers/s390/scsi/zfcp_* -S3C ADC BATTERY DRIVER -M: Krzysztof Kozlowski <[email protected]> -L: [email protected] -S: Odd Fixes -F: drivers/power/supply/s3c_adc_battery.c -F: include/linux/s3c_adc_battery.h - S3C24XX SD/MMC Driver M: Ben Dooks <[email protected]> L: [email protected] (moderated for non-subscribers)
drivers/power/supply/Kconfig +0 -6
@@ -406,12 +406,6 @@ config BATTERY_MAX1721X Say Y here to enable support for the MAX17211/MAX17215 standalone battery gas-gauge. -config BATTERY_S3C_ADC - tristate "Battery driver for Samsung ADC based monitoring" - depends on S3C_ADC - help - Say Y here to enable support for iPAQ h1930/h1940/rx1950 battery - config BATTERY_TWL4030_MADC tristate "TWL4030 MADC battery driver" depends on TWL4030_MADC
drivers/power/supply/Makefile +0 -1
@@ -54,7 +54,6 @@ obj-$(CONFIG_BATTERY_MAX17042) += max17042_battery.o obj-$(CONFIG_BATTERY_MAX1721X) += max1721x_battery.o obj-$(CONFIG_BATTERY_RT5033) += rt5033_battery.o obj-$(CONFIG_CHARGER_RT9455) += rt9455_charger.o -obj-$(CONFIG_BATTERY_S3C_ADC) += s3c_adc_battery.o obj-$(CONFIG_BATTERY_TWL4030_MADC) += twl4030_madc_battery.o obj-$(CONFIG_CHARGER_88PM860X) += 88pm860x_charger.o obj-$(CONFIG_CHARGER_PCF50633) += pcf50633-charger.o
drivers/power/supply/s3c_adc_battery.c deleted +0 -0
include/linux/s3c_adc_battery.h deleted +0 -0
Signature · 1 line
2.29.2
Lee Jones
maintainerRe: [PATCH 07/21] power: remove s3c adc battery driver
Quoted 6 lines · Arnd Bergmann
From: Arnd Bergmann <[email protected]>
The s3c-adc driver is removed along with the s3c24xx platform, so the battery driver is no longer needed either.
Signed-off-by Arnd Bergmann <[email protected]>
Quoted 9 lines
--- MAINTAINERS | 7 - drivers/power/supply/Kconfig | 6 - drivers/power/supply/Makefile | 1 - drivers/power/supply/s3c_adc_battery.c | 453 ------------------------- include/linux/s3c_adc_battery.h | 39 --- 5 files changed, 506 deletions(-) delete mode 100644 drivers/power/supply/s3c_adc_battery.c delete mode 100644 include/linux/s3c_adc_battery.h
Any idea why I was Cc'ed on this (and only this) patch?
Signature · 1 line
Lee Jones [李琼斯]
Arnd Bergmann
maintainerRe: [PATCH 07/21] power: remove s3c adc battery driver
Quoted 18 lines · Lee Jones
Quoted 6 lines · Arnd Bergmann
From: Arnd Bergmann <[email protected]>
The s3c-adc driver is removed along with the s3c24xx platform, so the battery driver is no longer needed either.
Signed-off-by Arnd Bergmann <[email protected]>Quoted 9 lines
--- MAINTAINERS | 7 - drivers/power/supply/Kconfig | 6 - drivers/power/supply/Makefile | 1 - drivers/power/supply/s3c_adc_battery.c | 453 ------------------------- include/linux/s3c_adc_battery.h | 39 --- 5 files changed, 506 deletions(-) delete mode 100644 drivers/power/supply/s3c_adc_battery.c delete mode 100644 include/linux/s3c_adc_battery.h
Quoted 1 line
Any idea why I was Cc'ed on this (and only this) patch?
Not sure. I use "get_maintainer.pl -i" to generate the list and try to prune it manually to avoid adding too many people to Cc. It appears that for this patch I accidentally included everyone who showed up in the git history for the maintainers file, rather than the people who touched the actual driver.
Arnd
Lee Jones
maintainerRe: [PATCH 07/21] power: remove s3c adc battery driver
Quoted 19 lines · Arnd Bergmann
Quoted 18 lines · Lee Jones
Quoted 15 lines · Arnd Bergmann
From: Arnd Bergmann <[email protected]>
The s3c-adc driver is removed along with the s3c24xx platform, so the battery driver is no longer needed either.
Signed-off-by Arnd Bergmann <[email protected]>--- MAINTAINERS | 7 - drivers/power/supply/Kconfig | 6 - drivers/power/supply/Makefile | 1 - drivers/power/supply/s3c_adc_battery.c | 453 ------------------------- include/linux/s3c_adc_battery.h | 39 --- 5 files changed, 506 deletions(-) delete mode 100644 drivers/power/supply/s3c_adc_battery.c delete mode 100644 include/linux/s3c_adc_battery.h
Quoted 8 lines
Quoted 1 line
Any idea why I was Cc'ed on this (and only this) patch?
Not sure. I use "get_maintainer.pl -i" to generate the list and try to prune it manually to avoid adding too many people to Cc. It appears that for this patch I accidentally included everyone who showed up in the git history for the maintainers file, rather than the people who touched the actual driver.
Understood. Thanks for the explanation.
Signature · 1 line
Lee Jones [李琼斯]
Re: [PATCH 07/21] power: remove s3c adc battery driver
In reply to Arnd BergmannQuoted 6 lines · Arnd Bergmann
From: Arnd Bergmann <[email protected]>
The s3c-adc driver is removed along with the s3c24xx platform, so the battery driver is no longer needed either.
Signed-off-by Arnd Bergmann <[email protected]>
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Re: [PATCH 07/21] power: remove s3c adc battery driver
In reply to Arnd BergmannHi,
Quoted 7 lines · Arnd Bergmann
From: Arnd Bergmann <[email protected]>
The s3c-adc driver is removed along with the s3c24xx platform, so the battery driver is no longer needed either.
Signed-off-by Arnd Bergmann <[email protected]>---
I suppose queuing this via power-supply will result in temporary build failures because the header is included in s3c24xx arch code. So better to merge via the same tree that is killing the arch code:
-- Sebastian
Quoted 65 lines
MAINTAINERS | 7 - drivers/power/supply/Kconfig | 6 - drivers/power/supply/Makefile | 1 - drivers/power/supply/s3c_adc_battery.c | 453 ------------------------- include/linux/s3c_adc_battery.h | 39 --- 5 files changed, 506 deletions(-) delete mode 100644 drivers/power/supply/s3c_adc_battery.c delete mode 100644 include/linux/s3c_adc_battery.hMAINTAINERS +0
-7@@ -17920,13 +17920,6 @@ S: Supported W: http://www.ibm.com/developerworks/linux/linux390/ F: drivers/s390/scsi/zfcp_* -S3C ADC BATTERY DRIVER -M: Krzysztof Kozlowski <[email protected]> -L: [email protected] -S: Odd Fixes -F: drivers/power/supply/s3c_adc_battery.c -F: include/linux/s3c_adc_battery.h - S3C24XX SD/MMC Driver M: Ben Dooks <[email protected]> L: [email protected] (moderated for non-subscribers)drivers/power/supply/Kconfig +0
-6@@ -406,12 +406,6 @@ config BATTERY_MAX1721X Say Y here to enable support for the MAX17211/MAX17215 standalone battery gas-gauge. -config BATTERY_S3C_ADC - tristate "Battery driver for Samsung ADC based monitoring" - depends on S3C_ADC - help - Say Y here to enable support for iPAQ h1930/h1940/rx1950 battery - config BATTERY_TWL4030_MADC tristate "TWL4030 MADC battery driver" depends on TWL4030_MADCdrivers/power/supply/Makefile +0
-1@@ -54,7 +54,6 @@ obj-$(CONFIG_BATTERY_MAX17042) += max17042_battery.o obj-$(CONFIG_BATTERY_MAX1721X) += max1721x_battery.o obj-$(CONFIG_BATTERY_RT5033) += rt5033_battery.o obj-$(CONFIG_CHARGER_RT9455) += rt9455_charger.o -obj-$(CONFIG_BATTERY_S3C_ADC) += s3c_adc_battery.o obj-$(CONFIG_BATTERY_TWL4030_MADC) += twl4030_madc_battery.o obj-$(CONFIG_CHARGER_88PM860X) += 88pm860x_charger.o obj-$(CONFIG_CHARGER_PCF50633) += pcf50633-charger.odrivers/power/supply/s3c_adc_battery.c deleted +0
-0include/linux/s3c_adc_battery.h deleted +0
-0Signature · 1 line
2.29.2
PATCH 8/21 hwmon: remove s3c driver
In reply to Arnd BergmannFrom: Arnd Bergmann <[email protected]>
The s3c adc driver was removed along with the s3c24xx platform, so the hwmon driver is orphaned and can be removed.
--- drivers/hwmon/Kconfig | 17 -- drivers/hwmon/Makefile | 1 - drivers/hwmon/s3c-hwmon.c | 379 -------------------------------------- 3 files changed, 397 deletions(-) delete mode 100644 drivers/hwmon/s3c-hwmon.c
drivers/hwmon/Kconfig +0 -17
@@ -1729,23 +1729,6 @@ config SENSORS_SHTC1 This driver can also be built as a module. If so, the module will be called shtc1. -config SENSORS_S3C - tristate "Samsung built-in ADC" - depends on S3C_ADC - help - If you say yes here you get support for the on-board ADCs of - the Samsung S3C24XX, S3C64XX and other series of SoC - - This driver can also be built as a module. If so, the module - will be called s3c-hwmon. - -config SENSORS_S3C_RAW - bool "Include raw channel attributes in sysfs" - depends on SENSORS_S3C - help - Say Y here if you want to include raw copies of all the ADC - channels in sysfs. - config SENSORS_SIS5595 tristate "Silicon Integrated Systems Corp. SiS5595" depends on PCI
drivers/hwmon/Makefile +0 -1
@@ -173,7 +173,6 @@ obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o obj-$(CONFIG_SENSORS_POWR1220) += powr1220.o obj-$(CONFIG_SENSORS_PWM_FAN) += pwm-fan.o obj-$(CONFIG_SENSORS_RASPBERRYPI_HWMON) += raspberrypi-hwmon.o -obj-$(CONFIG_SENSORS_S3C) += s3c-hwmon.o obj-$(CONFIG_SENSORS_SBTSI) += sbtsi_temp.o obj-$(CONFIG_SENSORS_SBRMI) += sbrmi.o obj-$(CONFIG_SENSORS_SCH56XX_COMMON)+= sch56xx-common.o
drivers/hwmon/s3c-hwmon.c deleted +0 -0
Signature · 7 lines
2.29.2 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Re: [PATCH 08/21] hwmon: remove s3c driver
Quoted 6 lines · Arnd Bergmann
From: Arnd Bergmann <[email protected]>
The s3c adc driver was removed along with the s3c24xx platform, so the hwmon driver is orphaned and can be removed.
Signed-off-by Arnd Bergmann <[email protected]>
I assume you plan to push the series together. If not, please let me know.
Guenter
Quoted 50 lines
--- drivers/hwmon/Kconfig | 17 -- drivers/hwmon/Makefile | 1 - drivers/hwmon/s3c-hwmon.c | 379 -------------------------------------- 3 files changed, 397 deletions(-)delete mode 100644
drivers/hwmon/s3c-hwmon.cdrivers/hwmon/Kconfig +0
-17@@ -1729,23 +1729,6 @@ config SENSORS_SHTC1 This driver can also be built as a module. If so, the module will be called shtc1. -config SENSORS_S3C - tristate "Samsung built-in ADC" - depends on S3C_ADC - help - If you say yes here you get support for the on-board ADCs of - the Samsung S3C24XX, S3C64XX and other series of SoC - - This driver can also be built as a module. If so, the module - will be called s3c-hwmon. - -config SENSORS_S3C_RAW - bool "Include raw channel attributes in sysfs" - depends on SENSORS_S3C - help - Say Y here if you want to include raw copies of all the ADC - channels in sysfs. - config SENSORS_SIS5595 tristate "Silicon Integrated Systems Corp. SiS5595" depends on PCIdrivers/hwmon/Makefile +0
-1@@ -173,7 +173,6 @@ obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o obj-$(CONFIG_SENSORS_POWR1220) += powr1220.o obj-$(CONFIG_SENSORS_PWM_FAN) += pwm-fan.o obj-$(CONFIG_SENSORS_RASPBERRYPI_HWMON) += raspberrypi-hwmon.o -obj-$(CONFIG_SENSORS_S3C) += s3c-hwmon.o obj-$(CONFIG_SENSORS_SBTSI) += sbtsi_temp.o obj-$(CONFIG_SENSORS_SBRMI) += sbrmi.o obj-$(CONFIG_SENSORS_SCH56XX_COMMON)+= sch56xx-common.odrivers/hwmon/s3c-hwmon.c deleted +0
-0
Arnd Bergmann
maintainerRe: [PATCH 08/21] hwmon: remove s3c driver
Quoted 11 lines · Guenter Roeck
Quoted 6 lines · Arnd Bergmann
From: Arnd Bergmann <[email protected]>
The s3c adc driver was removed along with the s3c24xx platform, so the hwmon driver is orphaned and can be removed.
Signed-off-by Arnd Bergmann <[email protected]>Acked-by Guenter Roeck <[email protected]>I assume you plan to push the series together. If not, please let me know.
Yes. I plan to pick up all the patches from the series through the soc tree that have not been NaK'd or applied to subsystem maintainer trees.
Arnd
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Re: [PATCH 08/21] hwmon: remove s3c driver
In reply to Arnd BergmannQuoted 7 lines · Arnd Bergmann
From: Arnd Bergmann <[email protected]>
The s3c adc driver was removed along with the s3c24xx platform, so the hwmon driver is orphaned and can be removed.
Signed-off-by Arnd Bergmann <[email protected]>---
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
PATCH 9/21 pata: remove samsung_cf driver
In reply to Arnd BergmannFrom: Arnd Bergmann <[email protected]>
This device was only used by the smdk6410 board file that is now gone, so the driver can be removed as well.
--- drivers/ata/Kconfig | 10 - drivers/ata/Makefile | 1 - drivers/ata/pata_samsung_cf.c | 662 ------------------- include/linux/platform_data/ata-samsung_cf.h | 31 - 4 files changed, 704 deletions(-) delete mode 100644 drivers/ata/pata_samsung_cf.c delete mode 100644 include/linux/platform_data/ata-samsung_cf.h
drivers/ata/Kconfig +0 -10
@@ -1136,16 +1136,6 @@ config PATA_RZ1000 If unsure, say N. -config PATA_SAMSUNG_CF - tristate "Samsung SoC PATA support" - depends on SAMSUNG_DEV_IDE || COMPILE_TEST - select PATA_TIMINGS - help - This option enables basic support for Samsung's S3C/S5P board - PATA controllers via the new ATA layer - - If unsure, say N. - config PATA_WINBOND_VLB tristate "Winbond W83759A VLB PATA support (Experimental)" depends on ISA
drivers/ata/Makefile +0 -1
@@ -109,7 +109,6 @@ obj-$(CONFIG_PATA_PLATFORM) += pata_platform.o obj-$(CONFIG_PATA_OF_PLATFORM) += pata_of_platform.o obj-$(CONFIG_PATA_RB532) += pata_rb532_cf.o obj-$(CONFIG_PATA_RZ1000) += pata_rz1000.o -obj-$(CONFIG_PATA_SAMSUNG_CF) += pata_samsung_cf.o obj-$(CONFIG_PATA_PXA) += pata_pxa.o
drivers/ata/pata_samsung_cf.c deleted +0 -0
include/linux/platform_data/ata-samsung_cf.h deleted +0 -0
Signature · 7 lines
2.29.2 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Re: [PATCH 09/21] pata: remove samsung_cf driver
Hello!
Quoted 6 lines · Arnd Bergmann
From: Arnd Bergmann <[email protected]>
This device was only used by the smdk6410 board file that is now gone, so the driver can be removed as well.
Signed-off-by Arnd Bergmann <[email protected]>
[...]
MBR, Sergey
Re: [PATCH 09/21] pata: remove samsung_cf driver
In reply to Arnd BergmannQuoted 6 lines · Arnd Bergmann
From: Arnd Bergmann <[email protected]>
This device was only used by the smdk6410 board file that is now gone, so the driver can be removed as well.
Signed-off-by Arnd Bergmann <[email protected]>
Arnd,
This patch does not apply to the for-6.2 branch of libata tree. I can fix that easily, but I am concerned about the fact that this deletes the header file include/linux/platform_data/ata-samsung_cf.h, which has some function declarations for gpio used under arch/arm/mach-s3c. So If I apply this before you queue the other patches for this driver in for-next, we may endup with build failures. No ?
Quoted 48 lines
--- drivers/ata/Kconfig | 10 - drivers/ata/Makefile | 1 - drivers/ata/pata_samsung_cf.c | 662 ------------------- include/linux/platform_data/ata-samsung_cf.h | 31 - 4 files changed, 704 deletions(-) delete mode 100644 drivers/ata/pata_samsung_cf.c delete mode 100644 include/linux/platform_data/ata-samsung_cf.hdrivers/ata/Kconfig +0
-10@@ -1136,16 +1136,6 @@ config PATA_RZ1000 If unsure, say N. -config PATA_SAMSUNG_CF - tristate "Samsung SoC PATA support" - depends on SAMSUNG_DEV_IDE || COMPILE_TEST - select PATA_TIMINGS - help - This option enables basic support for Samsung's S3C/S5P board - PATA controllers via the new ATA layer - - If unsure, say N. - config PATA_WINBOND_VLB tristate "Winbond W83759A VLB PATA support (Experimental)" depends on ISAdrivers/ata/Makefile +0
-1@@ -109,7 +109,6 @@ obj-$(CONFIG_PATA_PLATFORM) += pata_platform.o obj-$(CONFIG_PATA_OF_PLATFORM) += pata_of_platform.o obj-$(CONFIG_PATA_RB532) += pata_rb532_cf.o obj-$(CONFIG_PATA_RZ1000) += pata_rz1000.o -obj-$(CONFIG_PATA_SAMSUNG_CF) += pata_samsung_cf.o obj-$(CONFIG_PATA_PXA) += pata_pxa.odrivers/ata/pata_samsung_cf.c deleted +0
-0include/linux/platform_data/ata-samsung_cf.h deleted +0
-0
Signature · 2 lines
Damien Le Moal Western Digital Research
Damien Le Moal
Acked-byRe: [PATCH 09/21] pata: remove samsung_cf driver
Quoted 8 lines · Damien Le Moal
Quoted 6 lines · Arnd Bergmann
From: Arnd Bergmann <[email protected]>
This device was only used by the smdk6410 board file that is now gone, so the driver can be removed as well.
Signed-off-by Arnd Bergmann <[email protected]>
Quoted 8 lines
Arnd,
This patch does not apply to the for-6.2 branch of libata tree. I can fix that easily, but I am concerned about the fact that this deletes the header file
include/linux/platform_data/ata-samsung_cf.h, which has some function declarations for gpio used underarch/arm/mach-s3c. So If I apply this before you queue the other patches for this driver in for-next, we may endup with build failures. No ?
It may be simpler for you to take this patch ? If yes, then:
Quoted 50 lines
Quoted 49 lines
--- drivers/ata/Kconfig | 10 - drivers/ata/Makefile | 1 - drivers/ata/pata_samsung_cf.c | 662 ------------------- include/linux/platform_data/ata-samsung_cf.h | 31 - 4 files changed, 704 deletions(-) delete mode 100644 drivers/ata/pata_samsung_cf.c delete mode 100644 include/linux/platform_data/ata-samsung_cf.hdrivers/ata/Kconfig +0
-10@@ -1136,16 +1136,6 @@ config PATA_RZ1000 If unsure, say N. -config PATA_SAMSUNG_CF - tristate "Samsung SoC PATA support" - depends on SAMSUNG_DEV_IDE || COMPILE_TEST - select PATA_TIMINGS - help - This option enables basic support for Samsung's S3C/S5P board - PATA controllers via the new ATA layer - - If unsure, say N. - config PATA_WINBOND_VLB tristate "Winbond W83759A VLB PATA support (Experimental)" depends on ISAdrivers/ata/Makefile +0
-1@@ -109,7 +109,6 @@ obj-$(CONFIG_PATA_PLATFORM) += pata_platform.o obj-$(CONFIG_PATA_OF_PLATFORM) += pata_of_platform.o obj-$(CONFIG_PATA_RB532) += pata_rb532_cf.o obj-$(CONFIG_PATA_RZ1000) += pata_rz1000.o -obj-$(CONFIG_PATA_SAMSUNG_CF) += pata_samsung_cf.o obj-$(CONFIG_PATA_PXA) += pata_pxa.odrivers/ata/pata_samsung_cf.c deleted +0
-0include/linux/platform_data/ata-samsung_cf.h deleted +0
-0
Signature · 2 lines
Damien Le Moal Western Digital Research
Arnd Bergmann
maintainerRe: [PATCH 09/21] pata: remove samsung_cf driver
In reply to Damien Le MoalQuoted 6 lines · Damien Le Moal
Quoted 4 lines · Arnd Bergmann
From: Arnd Bergmann <[email protected]>
This device was only used by the smdk6410 board file that is now gone, so the driver can be removed as well.
Quoted 6 lines
This patch does not apply to the for-6.2 branch of libata tree. I can fix that easily, but I am concerned about the fact that this deletes the header file
include/linux/platform_data/ata-samsung_cf.h, which has some function declarations for gpio used underarch/arm/mach-s3c. So If I apply this before you queue the other patches for this driver in for-next, we may endup with build failures. No ?
Right, that was a mistake on my end. I had tested the full 98-patch series in sequence and assumed that the driver removal would be fine to apply separately. I'll just merge this one through the SoC tree then. I have double-checked the pbk3710 and palmld drivers, and those should not have a problem like this one. I still need to send the palmld driver, as the mach-pxa series had some unrelated issues.
Arnd
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Re: [PATCH 09/21] pata: remove samsung_cf driver
In reply to Arnd BergmannQuoted 21 lines · Arnd Bergmann
From: Arnd Bergmann <[email protected]>
This device was only used by the smdk6410 board file that is now gone, so the driver can be removed as well.
Signed-off-by Arnd Bergmann <[email protected]>--- drivers/ata/Kconfig | 10 - drivers/ata/Makefile | 1 - drivers/ata/pata_samsung_cf.c | 662 ------------------- include/linux/platform_data/ata-samsung_cf.h | 31 - 4 files changed, 704 deletions(-) delete mode 100644 drivers/ata/pata_samsung_cf.c delete mode 100644 include/linux/platform_data/ata-samsung_cf.hdrivers/ata/Kconfig +0
-0@@ -1136,16 +1136,6 @@ config PATA_RZ1000
drivers/ata/Kconfig config PATA_RZ1000 · line 1146
Quoted 10 lines
drivers/ata/Kconfig +0
-8If unsure, say N. -config PATA_SAMSUNG_CF - tristate "Samsung SoC PATA support" - depends on SAMSUNG_DEV_IDE || COMPILE_TEST - select PATA_TIMINGS - help - This option enables basic support for Samsung's S3C/S5P board - PATA controllers via the new ATA layer -
This driver is present and somehow usable on newer platform: S5PV210. It's not converted to DT, but someone might want to do it. OTOH, if no one added DT for all this time, I doubt anyone will. Postmarket/Lineage-folks target smartphones, so don't use it.
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
PATCH 10/21 mmc: remove s3cmci driver
In reply to Arnd BergmannFrom: Arnd Bergmann <[email protected]>
The s3c24xx platform is gone, so this driver can be removed as well.
--- MAINTAINERS | 6 - drivers/mmc/host/Kconfig | 43 - drivers/mmc/host/Makefile | 1 - drivers/mmc/host/s3cmci.c | 1777 ---------------------- drivers/mmc/host/s3cmci.h | 75 - include/linux/platform_data/mmc-s3cmci.h | 51 - 6 files changed, 1953 deletions(-) delete mode 100644 drivers/mmc/host/s3cmci.c delete mode 100644 drivers/mmc/host/s3cmci.h delete mode 100644 include/linux/platform_data/mmc-s3cmci.h
MAINTAINERS +0 -6
@@ -17920,12 +17920,6 @@ S: Supported W: http://www.ibm.com/developerworks/linux/linux390/ F: drivers/s390/scsi/zfcp_* -S3C24XX SD/MMC Driver -M: Ben Dooks <[email protected]> -L: [email protected] (moderated for non-subscribers) -S: Supported -F: drivers/mmc/host/s3cmci.* - SAA6588 RDS RECEIVER DRIVER M: Hans Verkuil <[email protected]> L: [email protected]
drivers/mmc/host/Kconfig +0 -43
49 lines not on this page · raw message
drivers/mmc/host/Makefile +0 -1
@@ -34,7 +34,6 @@ obj-$(CONFIG_MMC_MVSDIO) += mvsdio.o obj-$(CONFIG_MMC_DAVINCI) += davinci_mmc.o obj-$(CONFIG_MMC_SPI) += mmc_spi.o obj-$(CONFIG_MMC_SPI) += of_mmc_spi.o -obj-$(CONFIG_MMC_S3C) += s3cmci.o obj-$(CONFIG_MMC_SDRICOH_CS) += sdricoh_cs.o obj-$(CONFIG_MMC_TMIO_CORE) += tmio_mmc_core.o obj-$(CONFIG_MMC_SDHI) += renesas_sdhi_core.o
drivers/mmc/host/s3cmci.c deleted +0 -0
drivers/mmc/host/s3cmci.h deleted +0 -0
include/linux/platform_data/mmc-s3cmci.h deleted +0 -0
Signature · 7 lines
2.29.2 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Re: [PATCH 10/21] mmc: remove s3cmci driver
Quoted 5 lines · Arnd Bergmann
From: Arnd Bergmann <[email protected]>
The s3c24xx platform is gone, so this driver can be removed as well.
Signed-off-by Arnd Bergmann <[email protected]>
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Re: [PATCH 10/21] mmc: remove s3cmci driver
In reply to Arnd BergmannQuoted 6 lines · Arnd Bergmann
From: Arnd Bergmann <[email protected]>
The s3c24xx platform is gone, so this driver can be removed as well.
Signed-off-by Arnd Bergmann <[email protected]>
Kind regards
Uffe
Quoted 105 lines
--- MAINTAINERS | 6 - drivers/mmc/host/Kconfig | 43 - drivers/mmc/host/Makefile | 1 - drivers/mmc/host/s3cmci.c | 1777 ---------------------- drivers/mmc/host/s3cmci.h | 75 - include/linux/platform_data/mmc-s3cmci.h | 51 - 6 files changed, 1953 deletions(-) delete mode 100644 drivers/mmc/host/s3cmci.c delete mode 100644 drivers/mmc/host/s3cmci.h delete mode 100644 include/linux/platform_data/mmc-s3cmci.hMAINTAINERS +0
-6@@ -17920,12 +17920,6 @@ S: Supported W: http://www.ibm.com/developerworks/linux/linux390/ F: drivers/s390/scsi/zfcp_* -S3C24XX SD/MMC Driver -M: Ben Dooks <[email protected]> -L: [email protected] (moderated for non-subscribers) -S: Supported -F: drivers/mmc/host/s3cmci.* - SAA6588 RDS RECEIVER DRIVER M: Hans Verkuil <[email protected]> L: [email protected]drivers/mmc/host/Kconfig +0
-43@@ -619,49 +619,6 @@ config MMC_SPI If unsure, or if your system has no SPI master driver, say N. -config MMC_S3C - tristate "Samsung S3C SD/MMC Card Interface support" - depends on ARCH_S3C24XX || COMPILE_TEST - depends on S3C24XX_DMAC || COMPILE_TEST - help - This selects a driver for the MCI interface found in - Samsung's S3C2410, S3C2412, S3C2440, S3C2442 CPUs. - If you have a board based on one of those and a MMC/SD - slot, say Y or M here. - - If unsure, say N. - -config MMC_S3C_HW_SDIO_IRQ - bool "Hardware support for SDIO IRQ" - depends on MMC_S3C - help - Enable the hardware support for SDIO interrupts instead of using - the generic polling code. - -choice - prompt "Samsung S3C SD/MMC transfer code" - depends on MMC_S3C - -config MMC_S3C_PIO - bool "Use PIO transfers only" - help - Use PIO to transfer data between memory and the hardware. - - PIO is slower than DMA as it requires CPU instructions to - move the data. This has been the traditional default for - the S3C MCI driver. - -config MMC_S3C_DMA - bool "Use DMA transfers only" - help - Use DMA to transfer data between memory and the hardware. - - Currently, the DMA support in this driver seems to not be - working properly and needs to be debugged before this - option is useful. - -endchoice - config MMC_SDRICOH_CS tristate "MMC/SD driver for Ricoh Bay1Controllers" depends on PCI && PCMCIAdrivers/mmc/host/Makefile +0
-1@@ -34,7 +34,6 @@ obj-$(CONFIG_MMC_MVSDIO) += mvsdio.o obj-$(CONFIG_MMC_DAVINCI) += davinci_mmc.o obj-$(CONFIG_MMC_SPI) += mmc_spi.o obj-$(CONFIG_MMC_SPI) += of_mmc_spi.o -obj-$(CONFIG_MMC_S3C) += s3cmci.o obj-$(CONFIG_MMC_SDRICOH_CS) += sdricoh_cs.o obj-$(CONFIG_MMC_TMIO_CORE) += tmio_mmc_core.o obj-$(CONFIG_MMC_SDHI) += renesas_sdhi_core.odrivers/mmc/host/s3cmci.c deleted +0
-0drivers/mmc/host/s3cmci.h deleted +0
-0include/linux/platform_data/mmc-s3cmci.h deleted +0
-1--
Quoted 2 lines
2.29.2
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
PATCH 11/21 clk: remove s3c24xx driver
In reply to Arnd BergmannFrom: Arnd Bergmann <[email protected]>
The s3c24xx platform is gone, so the clk driver can be removed as well.
--- MAINTAINERS | 1 - drivers/clk/samsung/Kconfig | 32 -- drivers/clk/samsung/Makefile | 4 - drivers/clk/samsung/clk-s3c2410-dclk.c | 440 --------------------- drivers/clk/samsung/clk-s3c2410.c | 446 ---------------------- drivers/clk/samsung/clk-s3c2412.c | 254 ------------ drivers/clk/samsung/clk-s3c2443.c | 438 --------------------- include/linux/platform_data/clk-s3c2410.h | 19 - 8 files changed, 1634 deletions(-) delete mode 100644 drivers/clk/samsung/clk-s3c2410-dclk.c delete mode 100644 drivers/clk/samsung/clk-s3c2410.c delete mode 100644 drivers/clk/samsung/clk-s3c2412.c delete mode 100644 drivers/clk/samsung/clk-s3c2443.c delete mode 100644 include/linux/platform_data/clk-s3c2410.h
MAINTAINERS +0 -1
@@ -18078,7 +18078,6 @@ F: include/dt-bindings/clock/s3c*.h F: include/dt-bindings/clock/s5p*.h F: include/dt-bindings/clock/samsung,*.h F: include/linux/clk/samsung.h -F: include/linux/platform_data/clk-s3c2410.h SAMSUNG SPI DRIVERS M: Krzysztof Kozlowski <[email protected]>
drivers/clk/samsung/Kconfig +0 -32
@@ -94,38 +94,6 @@ config EXYNOS_CLKOUT status of the certains clocks from SoC, but it could also be tied to other devices as an input clock. -# For S3C24XX platforms, select following symbols: -config S3C2410_COMMON_CLK - bool "Samsung S3C2410 clock controller support" if COMPILE_TEST - select COMMON_CLK_SAMSUNG - help - Support for the clock controller present on the Samsung - S3C2410/S3C2440/S3C2442 SoCs. Choose Y here only if you build for - this SoC. - -config S3C2410_COMMON_DCLK - bool - select COMMON_CLK_SAMSUNG - select REGMAP_MMIO - help - Support for the dclk clock controller present on the Samsung - S3C2410/S3C2412/S3C2440/S3C2443 SoCs. Choose Y here only if you build - for this SoC. - -config S3C2412_COMMON_CLK - bool "Samsung S3C2412 clock controller support" if COMPILE_TEST - select COMMON_CLK_SAMSUNG - help - Support for the clock controller present on the Samsung S3C2412 SoCs. - Choose Y here only if you build for this SoC. - -config S3C2443_COMMON_CLK - bool "Samsung S3C2443 clock controller support" if COMPILE_TEST - select COMMON_CLK_SAMSUNG - help - Support for the clock controller present on the Samsung - S3C2416/S3C2443 SoCs. Choose Y here only if you build for this SoC. - config TESLA_FSD_COMMON_CLK bool "Tesla FSD clock controller support" if COMPILE_TEST depends on COMMON_CLK_SAMSUNG
drivers/clk/samsung/Makefile +0 -4
@@ -21,10 +21,6 @@ obj-$(CONFIG_EXYNOS_ARM64_COMMON_CLK) += clk-exynos7.o obj-$(CONFIG_EXYNOS_ARM64_COMMON_CLK) += clk-exynos7885.o obj-$(CONFIG_EXYNOS_ARM64_COMMON_CLK) += clk-exynos850.o obj-$(CONFIG_EXYNOS_ARM64_COMMON_CLK) += clk-exynosautov9.o -obj-$(CONFIG_S3C2410_COMMON_CLK)+= clk-s3c2410.o -obj-$(CONFIG_S3C2410_COMMON_DCLK)+= clk-s3c2410-dclk.o -obj-$(CONFIG_S3C2412_COMMON_CLK)+= clk-s3c2412.o -obj-$(CONFIG_S3C2443_COMMON_CLK)+= clk-s3c2443.o obj-$(CONFIG_S3C64XX_COMMON_CLK) += clk-s3c64xx.o obj-$(CONFIG_S5PV210_COMMON_CLK) += clk-s5pv210.o clk-s5pv210-audss.o obj-$(CONFIG_TESLA_FSD_COMMON_CLK) += clk-fsd.o
drivers/clk/samsung/clk-s3c2410-dclk.c deleted +0 -0
drivers/clk/samsung/clk-s3c2410.c deleted +0 -0
drivers/clk/samsung/clk-s3c2412.c deleted +0 -0
drivers/clk/samsung/clk-s3c2443.c deleted +0 -0
include/linux/platform_data/clk-s3c2410.h deleted +0 -0
Signature · 7 lines
2.29.2 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Re: [PATCH 11/21] clk: remove s3c24xx driver
Hi Arnd,
Quoted 6 lines · Arnd Bergmann
From: Arnd Bergmann <[email protected]>
The s3c24xx platform is gone, so the clk driver can be removed as well.
Signed-off-by Arnd Bergmann <[email protected]>
Quoted 15 lines
--- MAINTAINERS | 1 - drivers/clk/samsung/Kconfig | 32 -- drivers/clk/samsung/Makefile | 4 - drivers/clk/samsung/clk-s3c2410-dclk.c | 440 --------------------- drivers/clk/samsung/clk-s3c2410.c | 446 ---------------------- drivers/clk/samsung/clk-s3c2412.c | 254 ------------ drivers/clk/samsung/clk-s3c2443.c | 438 --------------------- include/linux/platform_data/clk-s3c2410.h | 19 - 8 files changed, 1634 deletions(-) delete mode 100644 drivers/clk/samsung/clk-s3c2410-dclk.c delete mode 100644 drivers/clk/samsung/clk-s3c2410.c delete mode 100644 drivers/clk/samsung/clk-s3c2412.c delete mode 100644 drivers/clk/samsung/clk-s3c2443.c delete mode 100644 include/linux/platform_data/clk-s3c2410.h
(snip)
I think that it should remove the pll code related to s3c24xx as following:
drivers/clk/samsung/clk-pll.c +0 -60
@@ -1061,48 +1061,6 @@ static void samsung_s3c2410_upll_disable(struct clk_hw *hw)samsung_s3c2410_pll_enable (hw,7 , false); } -static const struct clk_ops samsung_s3c2410_mpll_clk_min_ops = { - .recalc_rate = samsung_s3c2410_pll_recalc_rate, - .enable = samsung_s3c2410_mpll_enable, - .disable = samsung_s3c2410_mpll_disable, -}; - -static const struct clk_ops samsung_s3c2410_upll_clk_min_ops = { - .recalc_rate = samsung_s3c2410_pll_recalc_rate, - .enable = samsung_s3c2410_upll_enable, - .disable = samsung_s3c2410_upll_disable, -}; - -static const struct clk_ops samsung_s3c2440_mpll_clk_min_ops = { - .recalc_rate = samsung_s3c2440_mpll_recalc_rate, - .enable = samsung_s3c2410_mpll_enable, - .disable = samsung_s3c2410_mpll_disable, -}; - -static const struct clk_ops samsung_s3c2410_mpll_clk_ops = { - .recalc_rate = samsung_s3c2410_pll_recalc_rate, - .enable = samsung_s3c2410_mpll_enable, - .disable = samsung_s3c2410_mpll_disable, - .round_rate = samsung_pll_round_rate, - .set_rate = samsung_s3c2410_pll_set_rate, -}; - -static const struct clk_ops samsung_s3c2410_upll_clk_ops = { - .recalc_rate = samsung_s3c2410_pll_recalc_rate, - .enable = samsung_s3c2410_upll_enable, - .disable = samsung_s3c2410_upll_disable, - .round_rate = samsung_pll_round_rate, - .set_rate = samsung_s3c2410_pll_set_rate, -}; - -static const struct clk_ops samsung_s3c2440_mpll_clk_ops = { - .recalc_rate = samsung_s3c2440_mpll_recalc_rate, - .enable = samsung_s3c2410_mpll_enable, - .disable = samsung_s3c2410_mpll_disable, - .round_rate = samsung_pll_round_rate, - .set_rate = samsung_s3c2410_pll_set_rate, -}; -/* * PLL2550x Clock Type */
@@ -1530,24 +1488,6 @@ static void __init _samsung_clk_register_pll(struct samsung_clk_provider *ctx,else init.ops = &samsung_pll46xx_clk_ops;break ; -case pll_s3c2410_mpll: -if (!pll->rate_table) - init.ops = &samsung_s3c2410_mpll_clk_min_ops; -else - init.ops = &samsung_s3c2410_mpll_clk_ops; -break ; -case pll_s3c2410_upll: -if (!pll->rate_table) - init.ops = &samsung_s3c2410_upll_clk_min_ops; -else - init.ops = &samsung_s3c2410_upll_clk_ops; -break ; -case pll_s3c2440_mpll: -if (!pll->rate_table) - init.ops = &samsung_s3c2440_mpll_clk_min_ops; -else - init.ops = &samsung_s3c2440_mpll_clk_ops; -break ;case pll_2550x: init.ops = &samsung_pll2550x_clk_ops;break ;
drivers/clk/samsung/clk-pll.h +0 -21
@@ -25,9 +25,6 @@ enum samsung_pll_type { pll_6552, pll_6552_s3c2416, pll_6553, - pll_s3c2410_mpll, - pll_s3c2410_upll, - pll_s3c2440_mpll, pll_2550x, pll_2550xx, pll_2650x,
@@ -56,24 +53,6 @@ enum samsung_pll_type { .sdiv = (_s), \ } -#define PLL_S3C2410_MPLL_RATE (_fin, _rate, _m, _p, _s) \ - { \ - .rate = PLL_VALID_RATE(_fin, _rate, \ - _m + 8, _p + 2, _s, 0, 16), \ - .mdiv = (_m), \ - .pdiv = (_p), \ - .sdiv = (_s), \ - } - -#define PLL_S3C2440_MPLL_RATE (_fin, _rate, _m, _p, _s) \ - { \ - .rate = PLL_VALID_RATE(_fin, _rate, \ - 2 * (_m + 8), _p + 2, _s, 0, 16), \ - .mdiv = (_m), \ - .pdiv = (_p), \ - .sdiv = (_s), \ - } -#define PLL_36XX_RATE (_fin, _rate, _m, _p, _s, _k) \ { \ .rate = PLL_VALID_RATE(_fin, _rate, \
Signature · 9 lines
Best Regards, Samsung Electronics Chanwoo Choi _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Re: [PATCH 11/21] clk: remove s3c24xx driver
In reply to Arnd BergmannQuoted 4 lines · Arnd Bergmann
From: Arnd Bergmann <[email protected]>
The s3c24xx platform is gone, so the clk driver can be removed as well.
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Re: [PATCH 11/21] clk: remove s3c24xx driver
In reply to Arnd BergmannQuoting Arnd Bergmann (2022-10-21 13:27:44)
Quoted 7 lines
From: Arnd Bergmann <[email protected]>
The s3c24xx platform is gone, so the clk driver can be removed as well.
Signed-off-by Arnd Bergmann <[email protected]>---
PATCH 12/21 leds: remove s3c24xx driver
In reply to Arnd BergmannFrom: Arnd Bergmann <[email protected]>
The s3c24xx platform is gone, so the led driver can be removed as well.
--- drivers/leds/Kconfig | 8 --- drivers/leds/Makefile | 1 - drivers/leds/leds-s3c24xx.c | 83 ---------------------- include/linux/platform_data/leds-s3c24xx.h | 18 ----- 4 files changed, 110 deletions(-) delete mode 100644 drivers/leds/leds-s3c24xx.c delete mode 100644 include/linux/platform_data/leds-s3c24xx.h
drivers/leds/Kconfig +0 -8
@@ -244,14 +244,6 @@ config LEDS_MT6323 This option enables support for on-chip LED drivers found on Mediatek MT6323 PMIC. -config LEDS_S3C24XX - tristate "LED Support for Samsung S3C24XX GPIO LEDs" - depends on LEDS_CLASS - depends on ARCH_S3C24XX || COMPILE_TEST - help - This option enables support for LEDs connected to GPIO lines - on Samsung S3C24XX series CPUs, such as the S3C2410 and S3C2440. - config LEDS_NET48XX tristate "LED Support for Soekris net48xx series Error LED" depends on LEDS_CLASS
drivers/leds/Makefile +0 -1
@@ -73,7 +73,6 @@ obj-$(CONFIG_LEDS_PM8058) += leds-pm8058.o obj-$(CONFIG_LEDS_POWERNV) += leds-powernv.o obj-$(CONFIG_LEDS_PWM) += leds-pwm.o obj-$(CONFIG_LEDS_REGULATOR) += leds-regulator.o -obj-$(CONFIG_LEDS_S3C24XX) += leds-s3c24xx.o obj-$(CONFIG_LEDS_SC27XX_BLTC) += leds-sc27xx-bltc.o obj-$(CONFIG_LEDS_SUNFIRE) += leds-sunfire.o obj-$(CONFIG_LEDS_SYSCON) += leds-syscon.o
drivers/leds/leds-s3c24xx.c deleted +0 -0
include/linux/platform_data/leds-s3c24xx.h deleted +0 -0
Signature · 1 line
2.29.2
Re: [PATCH 12/21] leds: remove s3c24xx driver
Hi!
Quoted 6 lines
From: Arnd Bergmann <[email protected]>
The s3c24xx platform is gone, so the led driver can be removed as well.
Signed-off-by Arnd Bergmann <[email protected]>
git am failed, but I guess this is not critical...
Best regards,
Pavel
Signature · 1 line
People of Russia, stop Putin before his war on Ukraine escalates.
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Re: [PATCH 12/21] leds: remove s3c24xx driver
In reply to Arnd BergmannQuoted 7 lines · Arnd Bergmann
From: Arnd Bergmann <[email protected]>
The s3c24xx platform is gone, so the led driver can be removed as well.
Signed-off-by Arnd Bergmann <[email protected]>---
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
PATCH 13/21 usb: gadget: remove s3c24xx drivers
In reply to Arnd BergmannFrom: Arnd Bergmann <[email protected]>
The s3c24xx platform is gone, so both the udc and hsudc drivers can be removed as well.
--- drivers/usb/gadget/udc/Kconfig | 25 - drivers/usb/gadget/udc/Makefile | 2 - drivers/usb/gadget/udc/s3c-hsudc.c | 1319 ----------- drivers/usb/gadget/udc/s3c2410_udc.c | 1980 ----------------- drivers/usb/gadget/udc/s3c2410_udc.h | 99 - drivers/usb/gadget/udc/s3c2410_udc_regs.h | 146 -- include/linux/platform_data/s3c-hsudc.h | 33 - include/linux/platform_data/usb-s3c2410_udc.h | 33 - 8 files changed, 3637 deletions(-) delete mode 100644 drivers/usb/gadget/udc/s3c-hsudc.c delete mode 100644 drivers/usb/gadget/udc/s3c2410_udc.c delete mode 100644 drivers/usb/gadget/udc/s3c2410_udc.h delete mode 100644 drivers/usb/gadget/udc/s3c2410_udc_regs.h delete mode 100644 include/linux/platform_data/s3c-hsudc.h delete mode 100644 include/linux/platform_data/usb-s3c2410_udc.h
drivers/usb/gadget/udc/Kconfig +0 -25
@@ -218,31 +218,6 @@ config USB_PXA27X dynamically linked module called "pxa27x_udc" and force all gadget drivers to also be dynamically linked. -config USB_S3C2410 - tristate "S3C2410 USB Device Controller" - depends on ARCH_S3C24XX - help - Samsung's S3C2410 is an ARM-4 processor with an integrated - full speed USB 1.1 device controller. It has 4 configurable - endpoints, as well as endpoint zero (for control transfers). - - This driver has been tested on the S3C2410, S3C2412, and - S3C2440 processors. - -config USB_S3C2410_DEBUG - bool "S3C2410 udc debug messages" - depends on USB_S3C2410 - -config USB_S3C_HSUDC - tristate "S3C2416, S3C2443 and S3C2450 USB Device Controller" - depends on ARCH_S3C24XX - help - Samsung's S3C2416, S3C2443 and S3C2450 is an ARM9 based SoC - integrated with dual speed USB 2.0 device controller. It has - 8 endpoints, as well as endpoint zero. - - This driver has been tested on S3C2416 and S3C2450 processors. - config USB_MV_UDC tristate "Marvell USB2.0 Device Controller" depends on HAS_DMA
drivers/usb/gadget/udc/Makefile +0 -2
@@ -17,7 +17,6 @@ obj-$(CONFIG_USB_PXA25X) += pxa25x_udc.o obj-$(CONFIG_USB_PXA27X) += pxa27x_udc.o obj-$(CONFIG_USB_GOKU) += goku_udc.o obj-$(CONFIG_USB_OMAP) += omap_udc.o -obj-$(CONFIG_USB_S3C2410) += s3c2410_udc.o obj-$(CONFIG_USB_AT91) += at91_udc.o obj-$(CONFIG_USB_ATMEL_USBA) += atmel_usba_udc.o obj-$(CONFIG_USB_BCM63XX_UDC) += bcm63xx_udc.o
@@ -28,7 +27,6 @@ obj-$(CONFIG_USB_M66592) += m66592-udc.o obj-$(CONFIG_USB_R8A66597) += r8a66597-udc.o obj-$(CONFIG_USB_RENESAS_USB3) += renesas_usb3.o obj-$(CONFIG_USB_FSL_QE) += fsl_qe_udc.o -obj-$(CONFIG_USB_S3C_HSUDC) += s3c-hsudc.o obj-$(CONFIG_USB_LPC32XX) += lpc32xx_udc.o obj-$(CONFIG_USB_EG20T) += pch_udc.o obj-$(CONFIG_USB_MV_UDC) += mv_udc.o
drivers/usb/gadget/udc/s3c-hsudc.c deleted +0 -0
drivers/usb/gadget/udc/s3c2410_udc.c deleted +0 -0
drivers/usb/gadget/udc/s3c2410_udc.h deleted +0 -0
drivers/usb/gadget/udc/s3c2410_udc_regs.h deleted +0 -0
include/linux/platform_data/s3c-hsudc.h deleted +0 -0
include/linux/platform_data/usb-s3c2410_udc.h deleted +0 -0
Signature · 1 line
2.29.2
Re: [PATCH 13/21] usb: gadget: remove s3c24xx drivers
Quoted 6 lines · Arnd Bergmann
From: Arnd Bergmann <[email protected]>
The s3c24xx platform is gone, so both the udc and hsudc drivers can be removed as well.
Signed-off-by Arnd Bergmann <[email protected]>
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
PATCH 14/21 dmaengine: remove s3c24xx driver
In reply to Arnd BergmannFrom: Arnd Bergmann <[email protected]>
The s3c24xx platform was removed and this driver is no longer needed.
--- drivers/dma/Kconfig | 12 - drivers/dma/Makefile | 1 - drivers/dma/s3c24xx-dma.c | 1428 --------------------- include/linux/platform_data/dma-s3c24xx.h | 48 - 4 files changed, 1489 deletions(-) delete mode 100644 drivers/dma/s3c24xx-dma.c delete mode 100644 include/linux/platform_data/dma-s3c24xx.h
drivers/dma/Kconfig +0 -12
@@ -609,18 +609,6 @@ config SPRD_DMA help Enable support for the on-chip DMA controller on Spreadtrum platform. -config S3C24XX_DMAC - bool "Samsung S3C24XX DMA support" - depends on ARCH_S3C24XX || COMPILE_TEST - select DMA_ENGINE - select DMA_VIRTUAL_CHANNELS - help - Support for the Samsung S3C24XX DMA controller driver. The - DMA controller is having multiple DMA channels which can be - configured for different peripherals like audio, UART, SPI. - The DMA controller can transfer data from memory to peripheral, - periphal to memory, periphal to periphal and memory to memory. - config TXX9_DMAC tristate "Toshiba TXx9 SoC DMA support" depends on MACH_TX49XX
drivers/dma/Makefile +0 -1
@@ -70,7 +70,6 @@ obj-$(CONFIG_STM32_DMA) += stm32-dma.o obj-$(CONFIG_STM32_DMAMUX) += stm32-dmamux.o obj-$(CONFIG_STM32_MDMA) += stm32-mdma.o obj-$(CONFIG_SPRD_DMA) += sprd-dma.o -obj-$(CONFIG_S3C24XX_DMAC) += s3c24xx-dma.o obj-$(CONFIG_TXX9_DMAC) += txx9dmac.o obj-$(CONFIG_TEGRA186_GPC_DMA) += tegra186-gpc-dma.o obj-$(CONFIG_TEGRA20_APB_DMA) += tegra20-apb-dma.o
drivers/dma/s3c24xx-dma.c deleted +0 -0
include/linux/platform_data/dma-s3c24xx.h deleted +0 -0
Signature · 1 line
2.29.2
Re: [PATCH 14/21] dmaengine: remove s3c24xx driver
Quoted 6 lines · Arnd Bergmann
From: Arnd Bergmann <[email protected]>
The s3c24xx platform was removed and this driver is no longer needed.
Signed-off-by Arnd Bergmann <[email protected]>
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Re: [PATCH 14/21] dmaengine: remove s3c24xx driver
In reply to Arnd BergmannQuoted 4 lines · Arnd Bergmann
From: Arnd Bergmann <[email protected]>
The s3c24xx platform was removed and this driver is no longer needed.
Applied, thanks
Signature · 1 line
~Vinod
PATCH 1/1 ARM: s3c: Fix a build error after the s3c24xx dma driver was removed
In reply to Arnd BergmannThe linux/platform_data/dma-s3c24xx.h header file was removed. It didn't declare or define any symbol needed in devs.c though, so the #include can just be dropped.
--- arch/arm/mach-s3c/devs.c | 1 - 1 file changed, 1 deletion(-)
arch/arm/mach-s3c/devs.c +0 -1
@@ -29,7 +29,6 @@#include <linux/sizes.h> #include <linux/platform_data/s3c-hsudc.h> #include <linux/platform_data/s3c-hsotg.h> -#include <linux/platform_data/dma-s3c24xx.h> #include <linux/platform_data/media/s5p_hdmi.h>
Signature · 1 line
2.38.1
Re: [PATCH] ARM: s3c: Fix a build error after the s3c24xx dma driver was removed
Quoted 7 lines · Uwe Kleine-König
The
linux/platform_data/dma-s3c24xx.hheader file was removed. It didn't declare or define any symbol needed indevs.cthough, so the #include can just be dropped.Fixes cccc46ae3623 ("dmaengine: remove s3c24xx driver")Signed-off-by Uwe Kleine-König <[email protected]>---
The file was not removed... or it should not have been yet. The s3c24xx dma driver removal should be part of Arnd series taken via SoC ARM.
Best regards,
Krzysztof
Re: [PATCH] ARM: s3c: Fix a build error after the s3c24xx dma driver was removed
Quoted 11 lines · Krzysztof Kozlowski
Quoted 7 lines · Uwe Kleine-König
The
linux/platform_data/dma-s3c24xx.hheader file was removed. It didn't declare or define any symbol needed indevs.cthough, so the #include can just be dropped.Fixes cccc46ae3623 ("dmaengine: remove s3c24xx driver")Signed-off-by Uwe Kleine-König <[email protected]>---
The file was not removed... or it should not have been yet. The s3c24xx dma driver removal should be part of Arnd series taken via SoC ARM.
Also: I don't think the fix is correct. The header was used in mach-s3c, so removing the header should still cause broken build.
It also fails in other places:
arch/arm/mach-s3c/s3c24xx.c:21:10: fatal error:linux/platform_data/dma-s3c24xx.h: No such file or directory
21 | #include <linux/platform_data/dma-s3c24xx.h>
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
I think that commit should be just dropped instead.
Best regards,
Krzysztof
Re: [PATCH] ARM: s3c: Fix a build error after the s3c24xx dma driver was removed
Hello,
Quoted 6 lines · Krzysztof Kozlowski
Quoted 5 lines · Krzysztof Kozlowski
Quoted 4 lines · Uwe Kleine-König
The
linux/platform_data/dma-s3c24xx.hheader file was removed. It didn't declare or define any symbol needed indevs.cthough, so the #include can just be dropped.
Quoted 6 lines
Quoted 6 lines
Quoted 3 lines
Fixes cccc46ae3623 ("dmaengine: remove s3c24xx driver")Signed-off-by Uwe Kleine-König <[email protected]>---
The file was not removed... or it should not have been yet. The s3c24xx dma driver removal should be part of Arnd series taken via SoC ARM.
The patch enters next with the merge of
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine.git next
Ah, the patch that became cccc46ae3623 (i.e. patch #14) is part of a bigger series. Its patch #1 removes s3c24xx.c (which you pointed out to be still broken) and patch #2 includes the change I suggested here.
Quoted 1 line
I think that commit should be just dropped instead.
+1
BTW, cccc46ae3623 is included in next since next-20221107 and breaks (at least) arm/s3c2410_defconfig. So I would consider reverting cccc46ae3623 a fix. (Added linux-next to Cc:)
Best regards
Uwe
Signature · 2 lines
Pengutronix e.K. | Uwe Kleine-König | Industrial Linux Solutions | https://www.pengutronix.de/ |
Re: [PATCH] ARM: s3c: Fix a build error after the s3c24xx dma driver was removed
Quoted 24 lines · Uwe Kleine-König
Hello,
Quoted 6 lines · Krzysztof Kozlowski
Quoted 5 lines · Krzysztof Kozlowski
Quoted 4 lines · Uwe Kleine-König
The
linux/platform_data/dma-s3c24xx.hheader file was removed. It didn't declare or define any symbol needed indevs.cthough, so the #include can just be dropped.Quoted 6 lines
Quoted 6 lines
Quoted 3 lines
Fixes cccc46ae3623 ("dmaengine: remove s3c24xx driver")Signed-off-by Uwe Kleine-König <[email protected]>---
The file was not removed... or it should not have been yet. The s3c24xx dma driver removal should be part of Arnd series taken via SoC ARM.
The patch enters next with the merge of
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine.gitnextAh, the patch that became
cccc46ae3623(i.e. patch #14) is part of a bigger series. Its patch #1 removess3c24xx.c(which you pointed out to be still broken) and patch #2 includes the change I suggested here.
Quoted 7 lines
Quoted 1 line
I think that commit should be just dropped instead.
+1
BTW,
cccc46ae3623is included in next since next-20221107 and breaks (at least) arm/s3c2410_defconfig. So I would consider revertingcccc46ae3623a fix. (Added linux-next to Cc:)
Yes. The build failure of next was reported already by kernel test robot.
Vinod, can we drop this patch?
Best regards,
Krzysztof
Regression in dmaengine/next was removed
Hello,
I made the subject a bit more expressive.
Quoted 27 lines · Krzysztof Kozlowski
Quoted 26 lines · Uwe Kleine-König
Quoted 6 lines · Krzysztof Kozlowski
Quoted 5 lines · Krzysztof Kozlowski
Quoted 4 lines · Uwe Kleine-König
The
linux/platform_data/dma-s3c24xx.hheader file was removed. It didn't declare or define any symbol needed indevs.cthough, so the #include can just be dropped.Quoted 6 lines
Quoted 6 lines
Quoted 3 lines
Fixes cccc46ae3623 ("dmaengine: remove s3c24xx driver")Signed-off-by Uwe Kleine-König <[email protected]>---
The file was not removed... or it should not have been yet. The s3c24xx dma driver removal should be part of Arnd series taken via SoC ARM.
The patch enters next with the merge of
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine.gitnextAh, the patch that became
cccc46ae3623(i.e. patch #14) is part of a bigger series. Its patch #1 removess3c24xx.c(which you pointed out to be still broken) and patch #2 includes the change I suggested here.Quoted 1 line
I think that commit should be just dropped instead.
+1
Quoted 7 lines
Quoted 3 lines
BTW,
cccc46ae3623is included in next since next-20221107 and breaks (at least) arm/s3c2410_defconfig. So I would consider revertingcccc46ae3623a fix. (Added linux-next to Cc:)Yes. The build failure of next was reported already by kernel test robot.
Vinod, can we drop this patch?
That patch is still contained in the next tags of this week. :-(
Best regards
Uwe
Signature · 2 lines
Pengutronix e.K. | Uwe Kleine-König | Industrial Linux Solutions | https://www.pengutronix.de/ |
Vinod Koul
maintainerRe: Regression in dmaengine/next was removed
Quoted 36 lines · Uwe Kleine-König
Hello,
I made the subject a bit more expressive.
Quoted 31 lines · Krzysztof Kozlowski
Quoted 29 lines · Uwe Kleine-König
Quoted 6 lines · Krzysztof Kozlowski
Quoted 5 lines · Krzysztof Kozlowski
Quoted 4 lines · Uwe Kleine-König
The
linux/platform_data/dma-s3c24xx.hheader file was removed. It didn't declare or define any symbol needed indevs.cthough, so the #include can just be dropped.Quoted 6 lines
Quoted 6 lines
Quoted 3 lines
Fixes cccc46ae3623 ("dmaengine: remove s3c24xx driver")Signed-off-by Uwe Kleine-König <[email protected]>---
The file was not removed... or it should not have been yet. The s3c24xx dma driver removal should be part of Arnd series taken via SoC ARM.
The patch enters next with the merge of
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine.gitnextAh, the patch that became
cccc46ae3623(i.e. patch #14) is part of a bigger series. Its patch #1 removess3c24xx.c(which you pointed out to be still broken) and patch #2 includes the change I suggested here.Quoted 1 line
I think that commit should be just dropped instead.
+1
BTW,
cccc46ae3623is included in next since next-20221107 and breaks (at least) arm/s3c2410_defconfig. So I would consider revertingcccc46ae3623a fix. (Added linux-next to Cc:)
Quoted 5 lines
Quoted 3 lines
Yes. The build failure of next was reported already by kernel test robot.
Vinod, can we drop this patch?
That patch is still contained in the next tags of this week. :-(
Apologies for delay, I was moving...
I have reverted and pushed now
Thanks for following up!
Signature · 1 line
~Vinod
Re: Regression in dmaengine/next was removed
Hello Vinod,
Quoted 2 lines · Vinod Koul
Quoted 1 line · Uwe Kleine-König
I made the subject a bit more expressive.
I wonder what I intended to write there, something like "Regression in dmaengine/next in arm/s3c2410_defconfig", sorry to make it look as if you already fixed the regression :-)
Quoted 34 lines
Quoted 34 lines · Krzysztof Kozlowski
Quoted 33 lines · Uwe Kleine-König
Quoted 22 lines · Krzysztof Kozlowski
Quoted 6 lines · Krzysztof Kozlowski
Quoted 5 lines · Uwe Kleine-König
Quoted 4 lines
The
linux/platform_data/dma-s3c24xx.hheader file was removed. It didn't declare or define any symbol needed indevs.cthough, so the #include can just be dropped.Quoted 6 lines
Quoted 6 lines
Quoted 3 lines
Fixes cccc46ae3623 ("dmaengine: remove s3c24xx driver")Signed-off-by Uwe Kleine-König <[email protected]>---
The file was not removed... or it should not have been yet. The s3c24xx dma driver removal should be part of Arnd series taken via SoC ARM.
The patch enters next with the merge of
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine.gitnextAh, the patch that became
cccc46ae3623(i.e. patch #14) is part of a bigger series. Its patch #1 removess3c24xx.c(which you pointed out to be still broken) and patch #2 includes the change I suggested here.Quoted 7 lines
Quoted 1 line
I think that commit should be just dropped instead.
+1
BTW,
cccc46ae3623is included in next since next-20221107 and breaks (at least) arm/s3c2410_defconfig. So I would consider revertingcccc46ae3623a fix. (Added linux-next to Cc:)Yes. The build failure of next was reported already by kernel test robot.
Quoted 7 lines
Quoted 3 lines
Quoted 1 line
Vinod, can we drop this patch?
That patch is still contained in the next tags of this week. :-(
Apologies for delay, I was moving...
I have reverted and pushed now
Thanks!
Best regards
Uwe
Signature · 2 lines
Pengutronix e.K. | Uwe Kleine-König | Industrial Linux Solutions | https://www.pengutronix.de/ |
PATCH 15/21 cpufreq: remove s3c24xx drivers
In reply to Arnd BergmannFrom: Arnd Bergmann <[email protected]>
All s3c24xx platforms were removed, so these five drivers are all obsolete now.
--- drivers/cpufreq/Kconfig.arm | 78 --- drivers/cpufreq/Makefile | 6 - drivers/cpufreq/s3c2410-cpufreq.c | 155 ----- drivers/cpufreq/s3c2412-cpufreq.c | 240 ------- drivers/cpufreq/s3c2416-cpufreq.c | 492 -------------- drivers/cpufreq/s3c2440-cpufreq.c | 321 --------- drivers/cpufreq/s3c24xx-cpufreq-debugfs.c | 163 ----- drivers/cpufreq/s3c24xx-cpufreq.c | 648 ------------------- include/linux/soc/samsung/s3c-cpufreq-core.h | 299 --------- 9 files changed, 2402 deletions(-) delete mode 100644 drivers/cpufreq/s3c2410-cpufreq.c delete mode 100644 drivers/cpufreq/s3c2412-cpufreq.c delete mode 100644 drivers/cpufreq/s3c2416-cpufreq.c delete mode 100644 drivers/cpufreq/s3c2440-cpufreq.c delete mode 100644 drivers/cpufreq/s3c24xx-cpufreq-debugfs.c delete mode 100644 drivers/cpufreq/s3c24xx-cpufreq.c delete mode 100644 include/linux/soc/samsung/s3c-cpufreq-core.h
drivers/cpufreq/Kconfig.arm +0 -78
@@ -180,84 +180,6 @@ config ARM_RASPBERRYPI_CPUFREQ If in doubt, say N. -config ARM_S3C_CPUFREQ - bool - help - Internal configuration node for common cpufreq on Samsung SoC - -config ARM_S3C24XX_CPUFREQ - bool "CPUfreq driver for Samsung S3C24XX series CPUs (EXPERIMENTAL)" - depends on ARCH_S3C24XX - select ARM_S3C_CPUFREQ - help - This enables the CPUfreq driver for the Samsung S3C24XX family - of CPUs. - - For details, take a look at <file:Documentation/cpu-freq>. - - If in doubt, say N. - -config ARM_S3C24XX_CPUFREQ_DEBUG - bool "Debug CPUfreq Samsung driver core" - depends on ARM_S3C24XX_CPUFREQ - help - Enable s3c_freq_dbg for the Samsung S3C CPUfreq core - -config ARM_S3C24XX_CPUFREQ_IODEBUG - bool "Debug CPUfreq Samsung driver IO timing" - depends on ARM_S3C24XX_CPUFREQ - help - Enable s3c_freq_iodbg for the Samsung S3C CPUfreq core - -config ARM_S3C24XX_CPUFREQ_DEBUGFS - bool "Export debugfs for CPUFreq" - depends on ARM_S3C24XX_CPUFREQ && DEBUG_FS - help - Export status information via debugfs. - -config ARM_S3C2410_CPUFREQ - bool - depends on ARM_S3C24XX_CPUFREQ && CPU_S3C2410 - help - CPU Frequency scaling support for S3C2410 - -config ARM_S3C2412_CPUFREQ - bool - depends on ARM_S3C24XX_CPUFREQ && CPU_S3C2412 - default y - select S3C2412_IOTIMING - help - CPU Frequency scaling support for S3C2412 and S3C2413 SoC CPUs. - -config ARM_S3C2416_CPUFREQ - bool "S3C2416 CPU Frequency scaling support" - depends on CPU_S3C2416 - help - This adds the CPUFreq driver for the Samsung S3C2416 and - S3C2450 SoC. The S3C2416 supports changing the rate of the - armdiv clock source and also entering a so called dynamic - voltage scaling mode in which it is possible to reduce the - core voltage of the CPU. - - If in doubt, say N. - -config ARM_S3C2416_CPUFREQ_VCORESCALE - bool "Allow voltage scaling for S3C2416 arm core" - depends on ARM_S3C2416_CPUFREQ && REGULATOR - help - Enable CPU voltage scaling when entering the dvs mode. - It uses information gathered through existing hardware and - tests but not documented in any datasheet. - - If in doubt, say N. - -config ARM_S3C2440_CPUFREQ - bool "S3C2440/S3C2442 CPU Frequency scaling support" - depends on ARM_S3C24XX_CPUFREQ && (CPU_S3C2440 || CPU_S3C2442) - default y - help - CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs. - config ARM_S3C64XX_CPUFREQ bool "Samsung S3C64XX" depends on CPU_S3C6410
drivers/cpufreq/Makefile +0 -6
@@ -70,13 +70,7 @@ obj-$(CONFIG_PXA3xx) += pxa3xx-cpufreq.o obj-$(CONFIG_ARM_QCOM_CPUFREQ_HW) += qcom-cpufreq-hw.o obj-$(CONFIG_ARM_QCOM_CPUFREQ_NVMEM) += qcom-cpufreq-nvmem.o obj-$(CONFIG_ARM_RASPBERRYPI_CPUFREQ) += raspberrypi-cpufreq.o -obj-$(CONFIG_ARM_S3C2410_CPUFREQ) += s3c2410-cpufreq.o -obj-$(CONFIG_ARM_S3C2412_CPUFREQ) += s3c2412-cpufreq.o -obj-$(CONFIG_ARM_S3C2416_CPUFREQ) += s3c2416-cpufreq.o -obj-$(CONFIG_ARM_S3C2440_CPUFREQ) += s3c2440-cpufreq.o obj-$(CONFIG_ARM_S3C64XX_CPUFREQ) += s3c64xx-cpufreq.o -obj-$(CONFIG_ARM_S3C24XX_CPUFREQ) += s3c24xx-cpufreq.o -obj-$(CONFIG_ARM_S3C24XX_CPUFREQ_DEBUGFS) += s3c24xx-cpufreq-debugfs.o obj-$(CONFIG_ARM_S5PV210_CPUFREQ) += s5pv210-cpufreq.o obj-$(CONFIG_ARM_SA1110_CPUFREQ) += sa1110-cpufreq.o obj-$(CONFIG_ARM_SCMI_CPUFREQ) += scmi-cpufreq.o
drivers/cpufreq/s3c2410-cpufreq.c deleted +0 -0
drivers/cpufreq/s3c2412-cpufreq.c deleted +0 -0
drivers/cpufreq/s3c2416-cpufreq.c deleted +0 -0
drivers/cpufreq/s3c2440-cpufreq.c deleted +0 -0
drivers/cpufreq/s3c24xx-cpufreq-debugfs.c deleted +0 -0
drivers/cpufreq/s3c24xx-cpufreq.c deleted +0 -0
include/linux/soc/samsung/s3c-cpufreq-core.h deleted +0 -0
Signature · 1 line
2.29.2
Re: [PATCH 15/21] cpufreq: remove s3c24xx drivers
Quoted 6 lines · Arnd Bergmann
From: Arnd Bergmann <[email protected]>
All s3c24xx platforms were removed, so these five drivers are all obsolete now.
Signed-off-by Arnd Bergmann <[email protected]>
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Re: [PATCH 15/21] cpufreq: remove s3c24xx drivers
In reply to Arnd Bergmanninclude/linux/soc/samsung/s3c-cpufreq-core.h
Quoted 153 lines · Arnd Bergmann
From: Arnd Bergmann <[email protected]>
All s3c24xx platforms were removed, so these five drivers are all obsolete now.
Signed-off-by Arnd Bergmann <[email protected]>--- drivers/cpufreq/Kconfig.arm | 78 --- drivers/cpufreq/Makefile | 6 - drivers/cpufreq/s3c2410-cpufreq.c | 155 ----- drivers/cpufreq/s3c2412-cpufreq.c | 240 ------- drivers/cpufreq/s3c2416-cpufreq.c | 492 -------------- drivers/cpufreq/s3c2440-cpufreq.c | 321 --------- drivers/cpufreq/s3c24xx-cpufreq-debugfs.c | 163 ----- drivers/cpufreq/s3c24xx-cpufreq.c | 648 ------------------- include/linux/soc/samsung/s3c-cpufreq-core.h | 299 --------- 9 files changed, 2402 deletions(-) delete mode 100644 drivers/cpufreq/s3c2410-cpufreq.c delete mode 100644 drivers/cpufreq/s3c2412-cpufreq.c delete mode 100644 drivers/cpufreq/s3c2416-cpufreq.c delete mode 100644 drivers/cpufreq/s3c2440-cpufreq.c delete mode 100644 drivers/cpufreq/s3c24xx-cpufreq-debugfs.c delete mode 100644 drivers/cpufreq/s3c24xx-cpufreq.c delete mode 100644 include/linux/soc/samsung/s3c-cpufreq-core.hdrivers/cpufreq/Kconfig.arm +0
-78@@ -180,84 +180,6 @@ config ARM_RASPBERRYPI_CPUFREQ If in doubt, say N. -config ARM_S3C_CPUFREQ - bool - help - Internal configuration node for common cpufreq on Samsung SoC - -config ARM_S3C24XX_CPUFREQ - bool "CPUfreq driver for Samsung S3C24XX series CPUs (EXPERIMENTAL)" - depends on ARCH_S3C24XX - select ARM_S3C_CPUFREQ - help - This enables the CPUfreq driver for the Samsung S3C24XX family - of CPUs. - - For details, take a look at <file:Documentation/cpu-freq>. - - If in doubt, say N. - -config ARM_S3C24XX_CPUFREQ_DEBUG - bool "Debug CPUfreq Samsung driver core" - depends on ARM_S3C24XX_CPUFREQ - help - Enable s3c_freq_dbg for the Samsung S3C CPUfreq core - -config ARM_S3C24XX_CPUFREQ_IODEBUG - bool "Debug CPUfreq Samsung driver IO timing" - depends on ARM_S3C24XX_CPUFREQ - help - Enable s3c_freq_iodbg for the Samsung S3C CPUfreq core - -config ARM_S3C24XX_CPUFREQ_DEBUGFS - bool "Export debugfs for CPUFreq" - depends on ARM_S3C24XX_CPUFREQ && DEBUG_FS - help - Export status information via debugfs. - -config ARM_S3C2410_CPUFREQ - bool - depends on ARM_S3C24XX_CPUFREQ && CPU_S3C2410 - help - CPU Frequency scaling support for S3C2410 - -config ARM_S3C2412_CPUFREQ - bool - depends on ARM_S3C24XX_CPUFREQ && CPU_S3C2412 - default y - select S3C2412_IOTIMING - help - CPU Frequency scaling support for S3C2412 and S3C2413 SoC CPUs. - -config ARM_S3C2416_CPUFREQ - bool "S3C2416 CPU Frequency scaling support" - depends on CPU_S3C2416 - help - This adds the CPUFreq driver for the Samsung S3C2416 and - S3C2450 SoC. The S3C2416 supports changing the rate of the - armdiv clock source and also entering a so called dynamic - voltage scaling mode in which it is possible to reduce the - core voltage of the CPU. - - If in doubt, say N. - -config ARM_S3C2416_CPUFREQ_VCORESCALE - bool "Allow voltage scaling for S3C2416 arm core" - depends on ARM_S3C2416_CPUFREQ && REGULATOR - help - Enable CPU voltage scaling when entering the dvs mode. - It uses information gathered through existing hardware and - tests but not documented in any datasheet. - - If in doubt, say N. - -config ARM_S3C2440_CPUFREQ - bool "S3C2440/S3C2442 CPU Frequency scaling support" - depends on ARM_S3C24XX_CPUFREQ && (CPU_S3C2440 || CPU_S3C2442) - default y - help - CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs. - config ARM_S3C64XX_CPUFREQ bool "Samsung S3C64XX" depends on CPU_S3C6410drivers/cpufreq/Makefile +0
-6@@ -70,13 +70,7 @@ obj-$(CONFIG_PXA3xx) += pxa3xx-cpufreq.o obj-$(CONFIG_ARM_QCOM_CPUFREQ_HW) += qcom-cpufreq-hw.o obj-$(CONFIG_ARM_QCOM_CPUFREQ_NVMEM) += qcom-cpufreq-nvmem.o obj-$(CONFIG_ARM_RASPBERRYPI_CPUFREQ) += raspberrypi-cpufreq.o -obj-$(CONFIG_ARM_S3C2410_CPUFREQ) += s3c2410-cpufreq.o -obj-$(CONFIG_ARM_S3C2412_CPUFREQ) += s3c2412-cpufreq.o -obj-$(CONFIG_ARM_S3C2416_CPUFREQ) += s3c2416-cpufreq.o -obj-$(CONFIG_ARM_S3C2440_CPUFREQ) += s3c2440-cpufreq.o obj-$(CONFIG_ARM_S3C64XX_CPUFREQ) += s3c64xx-cpufreq.o -obj-$(CONFIG_ARM_S3C24XX_CPUFREQ) += s3c24xx-cpufreq.o -obj-$(CONFIG_ARM_S3C24XX_CPUFREQ_DEBUGFS) += s3c24xx-cpufreq-debugfs.o obj-$(CONFIG_ARM_S5PV210_CPUFREQ) += s5pv210-cpufreq.o obj-$(CONFIG_ARM_SA1110_CPUFREQ) += sa1110-cpufreq.o obj-$(CONFIG_ARM_SCMI_CPUFREQ) += scmi-cpufreq.odrivers/cpufreq/s3c2410-cpufreq.c deleted +0
-0drivers/cpufreq/s3c2412-cpufreq.c deleted +0
-0drivers/cpufreq/s3c2416-cpufreq.c deleted +0
-0drivers/cpufreq/s3c2440-cpufreq.c deleted +0
-0drivers/cpufreq/s3c24xx-cpufreq-debugfs.c deleted +0
-0drivers/cpufreq/s3c24xx-cpufreq.c deleted +0
-0include/linux/soc/samsung/s3c-cpufreq-core.h deleted +0
-0
Signature · 1 line
viresh
PATCH 16/21 fbdev: remove s3c2410 framebuffer
In reply to Arnd BergmannFrom: Arnd Bergmann <[email protected]>
The s3c24xx platform was removed, so the framebuffer driver is no longer needed.
--- drivers/video/fbdev/Kconfig | 33 +- drivers/video/fbdev/Makefile | 1 - drivers/video/fbdev/s3c2410fb-regs-lcd.h | 143 --- drivers/video/fbdev/s3c2410fb.c | 1142 ---------------------- drivers/video/fbdev/s3c2410fb.h | 48 - include/linux/platform_data/fb-s3c2410.h | 99 -- 6 files changed, 4 insertions(+), 1462 deletions(-) delete mode 100644 drivers/video/fbdev/s3c2410fb-regs-lcd.h delete mode 100644 drivers/video/fbdev/s3c2410fb.c delete mode 100644 drivers/video/fbdev/s3c2410fb.h delete mode 100644 include/linux/platform_data/fb-s3c2410.h
drivers/video/fbdev/Kconfig +4 -29
@@ -1822,19 +1822,17 @@ config FB_SH_MOBILE_LCDC config FB_S3C tristate "Samsung S3C framebuffer support" depends on FB && HAVE_CLK && HAS_IOMEM - depends on (CPU_S3C2416 || ARCH_S3C64XX) || COMPILE_TEST + depends on ARCH_S3C64XX || COMPILE_TEST select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT help Frame buffer driver for the built-in FB controller in the Samsung - SoC line from the S3C2443 onwards, including the S3C2416, S3C2450, - and the S3C64XX series such as the S3C6400 and S3C6410. + SoC line such as the S3C6400 and S3C6410. These chips all have the same basic framebuffer design with the - actual capabilities depending on the chip. For instance the S3C6400 - and S3C6410 support 4 hardware windows whereas the S3C24XX series - currently only have two. + actual capabilities depending on the chip. The S3C6400 + and S3C6410 support 4 hardware windows. Currently the support is only for the S3C6400 and S3C6410 SoCs.
@@ -1844,29 +1842,6 @@ config FB_S3C_DEBUG_REGWRITE help Show all register writes via pr_debug() -config FB_S3C2410 - tristate "S3C2410 LCD framebuffer support" - depends on FB && ARCH_S3C24XX - select FB_CFB_FILLRECT - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT - help - Frame buffer driver for the built-in LCD controller in the Samsung - S3C2410 processor. - - This driver is also available as a module ( = code which can be - inserted and removed from the running kernel whenever you want). The - module will be called s3c2410fb. If you want to compile it as a module, - say M here and read <file:Documentation/kbuild/modules.rst>. - - If unsure, say N. -config FB_S3C2410_DEBUG - bool "S3C2410 lcd debug messages" - depends on FB_S3C2410 - help - Turn on debugging messages. Note that you can set/unset at run time - through sysfs - config FB_SM501 tristate "Silicon Motion SM501 framebuffer support" depends on FB && MFD_SM501
drivers/video/fbdev/Makefile +0 -1
@@ -98,7 +98,6 @@ obj-$(CONFIG_FB_S1D13XXX) += s1d13xxxfb.o obj-$(CONFIG_FB_SH7760) += sh7760fb.o obj-$(CONFIG_FB_IMX) += imxfb.o obj-$(CONFIG_FB_S3C) += s3c-fb.o -obj-$(CONFIG_FB_S3C2410) += s3c2410fb.o obj-$(CONFIG_FB_FSL_DIU) += fsl-diu-fb.o obj-$(CONFIG_FB_COBALT) += cobalt_lcdfb.o obj-$(CONFIG_FB_IBM_GXT4500) += gxt4500.o
drivers/video/fbdev/s3c2410fb-regs-lcd.h deleted +0 -0
drivers/video/fbdev/s3c2410fb.c deleted +0 -0
drivers/video/fbdev/s3c2410fb.h deleted +0 -0
include/linux/platform_data/fb-s3c2410.h deleted +0 -0
Signature · 1 line
2.29.2
Re: [PATCH 16/21] fbdev: remove s3c2410 framebuffer
Quoted 7 lines · Arnd Bergmann
From: Arnd Bergmann <[email protected]>
The s3c24xx platform was removed, so the framebuffer driver is no longer needed.
Signed-off-by Arnd Bergmann <[email protected]>---
Best regards,
Krzysztof
PATCH 17/21 input: remove s3c24xx touchscreen driver
In reply to Arnd BergmannFrom: Arnd Bergmann <[email protected]>
The s3c24xx SoC support and its adc driver was removed, so this driver has no remaining users.
--- drivers/input/touchscreen/Kconfig | 12 - drivers/input/touchscreen/Makefile | 1 - drivers/input/touchscreen/s3c2410_ts.c | 464 ------------------------- 3 files changed, 477 deletions(-) delete mode 100644 drivers/input/touchscreen/s3c2410_ts.c
drivers/input/touchscreen/Kconfig +0 -12
@@ -462,18 +462,6 @@ config TOUCHSCREEN_IPROC To compile this driver as a module, choose M here: the module will be called bcm_iproc_tsc. -config TOUCHSCREEN_S3C2410 - tristate "Samsung S3C2410/generic touchscreen input driver" - depends on ARCH_S3C24XX || SAMSUNG_DEV_TS - depends on S3C_ADC - help - Say Y here if you have the s3c2410 touchscreen. - - If unsure, say N. - - To compile this driver as a module, choose M here: the - module will be called s3c2410_ts. - config TOUCHSCREEN_S6SY761 tristate "Samsung S6SY761 Touchscreen driver" depends on I2C
drivers/input/touchscreen/Makefile +0 -1
@@ -73,7 +73,6 @@ obj-$(CONFIG_TOUCHSCREEN_PCAP) += pcap_ts.o obj-$(CONFIG_TOUCHSCREEN_PENMOUNT) += penmount.o obj-$(CONFIG_TOUCHSCREEN_PIXCIR) += pixcir_i2c_ts.o obj-$(CONFIG_TOUCHSCREEN_RM_TS) += raydium_i2c_ts.o -obj-$(CONFIG_TOUCHSCREEN_S3C2410) += s3c2410_ts.o obj-$(CONFIG_TOUCHSCREEN_S6SY761) += s6sy761.o obj-$(CONFIG_TOUCHSCREEN_SILEAD) += silead.o obj-$(CONFIG_TOUCHSCREEN_SIS_I2C) += sis_i2c.o
drivers/input/touchscreen/s3c2410_ts.c deleted +0 -0
Signature · 1 line
2.29.2
Re: [PATCH 17/21] input: remove s3c24xx touchscreen driver
Quoted 6 lines · Arnd Bergmann
From: Arnd Bergmann <[email protected]>
The s3c24xx SoC support and its adc driver was removed, so this driver has no remaining users.
Signed-off-by Arnd Bergmann <[email protected]>
Thanks.
Signature · 6 lines
Dmitry _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Re: [PATCH 17/21] input: remove s3c24xx touchscreen driver
In reply to Arnd BergmannQuoted 11 lines · Arnd Bergmann
From: Arnd Bergmann <[email protected]>
The s3c24xx SoC support and its adc driver was removed, so this driver has no remaining users.
Signed-off-by Arnd Bergmann <[email protected]>--- drivers/input/touchscreen/Kconfig | 12 - drivers/input/touchscreen/Makefile | 1 - drivers/input/touchscreen/s3c2410_ts.c | 464 ------------------------- 3 files changed, 477 deletions(-)
This also could be usable on S3C64xx, but it seems no one added any DT nodes, so:
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Arnd Bergmann
maintainerRe: [PATCH 17/21] input: remove s3c24xx touchscreen driver
Quoted 13 lines · Krzysztof Kozlowski
Quoted 11 lines · Arnd Bergmann
From: Arnd Bergmann <[email protected]>
The s3c24xx SoC support and its adc driver was removed, so this driver has no remaining users.
Signed-off-by Arnd Bergmann <[email protected]>--- drivers/input/touchscreen/Kconfig | 12 - drivers/input/touchscreen/Makefile | 1 - drivers/input/touchscreen/s3c2410_ts.c | 464 ------------------------- 3 files changed, 477 deletions(-)
Quoted 4 lines
This also could be usable on S3C64xx, but it seems no one added any DT nodes, so:
Reviewed-by Krzysztof Kozlowski <[email protected]>
Thanks. To clarify, the key bit here is the 'depends on S3C_ADC', and that driver in turn 'depends on !ARCH_MULTIPLATFORM' since 2014. So even for the boardfile variant of s3c64xx, it was already impossible to use for a long time without anyone complaining or trying to fix it.
Arnd
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
PATCH 18/21 pinctrl: remove s3c24xx driver
In reply to Arnd BergmannFrom: Arnd Bergmann <[email protected]>
The s3c24xx platform was removed, so this driver has no remaining users.
--- drivers/pinctrl/samsung/Kconfig | 5 - drivers/pinctrl/samsung/Makefile | 1 - drivers/pinctrl/samsung/pinctrl-s3c24xx.c | 653 ---------------------- 3 files changed, 659 deletions(-) delete mode 100644 drivers/pinctrl/samsung/pinctrl-s3c24xx.c
drivers/pinctrl/samsung/Kconfig +0 -5
@@ -23,11 +23,6 @@ config PINCTRL_EXYNOS_ARM64 bool "ARMv8-specific pinctrl driver for Samsung Exynos SoCs" if COMPILE_TEST depends on PINCTRL_EXYNOS -config PINCTRL_S3C24XX - bool "Samsung S3C24XX SoC pinctrl driver" - depends on ARCH_S3C24XX || (COMPILE_TEST && OF) - select PINCTRL_SAMSUNG - config PINCTRL_S3C64XX bool "Samsung S3C64XX SoC pinctrl driver" depends on ARCH_S3C64XX || (COMPILE_TEST && OF)
drivers/pinctrl/samsung/Makefile +0 -1
@@ -5,5 +5,4 @@ obj-$(CONFIG_PINCTRL_SAMSUNG) += pinctrl-samsung.o obj-$(CONFIG_PINCTRL_EXYNOS) += pinctrl-exynos.o obj-$(CONFIG_PINCTRL_EXYNOS_ARM) += pinctrl-exynos-arm.o obj-$(CONFIG_PINCTRL_EXYNOS_ARM64) += pinctrl-exynos-arm64.o -obj-$(CONFIG_PINCTRL_S3C24XX) += pinctrl-s3c24xx.o obj-$(CONFIG_PINCTRL_S3C64XX) += pinctrl-s3c64xx.o
drivers/pinctrl/samsung/pinctrl-s3c24xx.c deleted +0 -0
Signature · 1 line
2.29.2
Re: [PATCH 18/21] pinctrl: remove s3c24xx driver
Quoted 6 lines · Arnd Bergmann
From: Arnd Bergmann <[email protected]>
The s3c24xx platform was removed, so this driver has no remaining users.
Signed-off-by Arnd Bergmann <[email protected]>
Yours,
Linus Walleij
Re: [PATCH 18/21] pinctrl: remove s3c24xx driver
In reply to Arnd BergmannQuoted 6 lines · Arnd Bergmann
From: Arnd Bergmann <[email protected]>
The s3c24xx platform was removed, so this driver has no remaining users.
Signed-off-by Arnd Bergmann <[email protected]>
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
PATCH 19/21 spi: remove s3c24xx driver
In reply to Arnd BergmannFrom: Arnd Bergmann <[email protected]>
The s3c24xx platform was removed,s o there are no remaining users for its spi driver.
--- MAINTAINERS | 1 - drivers/spi/Kconfig | 18 - drivers/spi/Makefile | 2 - drivers/spi/spi-s3c24xx-regs.h | 41 --- drivers/spi/spi-s3c24xx.c | 596 -------------------------------- include/linux/spi/s3c24xx-fiq.h | 33 -- include/linux/spi/s3c24xx.h | 20 -- 7 files changed, 711 deletions(-) delete mode 100644 drivers/spi/spi-s3c24xx-regs.h delete mode 100644 drivers/spi/spi-s3c24xx.c delete mode 100644 include/linux/spi/s3c24xx-fiq.h delete mode 100644 include/linux/spi/s3c24xx.h
MAINTAINERS +0 -1
@@ -18088,7 +18088,6 @@ S: Maintained F: Documentation/devicetree/bindings/spi/samsung,spi*.yaml F: drivers/spi/spi-s3c* F: include/linux/platform_data/spi-s3c64xx.h -F: include/linux/spi/s3c24xx-fiq.h SAMSUNG SXGBE DRIVERS M: Byungho An <[email protected]>
drivers/spi/Kconfig +0 -18
@@ -818,24 +818,6 @@ config SPI_QCOM_GENI This driver can also be built as a module. If so, the module will be called spi-geni-qcom. -config SPI_S3C24XX - tristate "Samsung S3C24XX series SPI" - depends on ARCH_S3C24XX - select SPI_BITBANG - help - SPI driver for Samsung S3C24XX series ARM SoCs - -config SPI_S3C24XX_FIQ - bool "S3C24XX driver with FIQ pseudo-DMA" - depends on SPI_S3C24XX - select FIQ - help - Enable FIQ support for the S3C24XX SPI driver to provide pseudo - DMA by using the fast-interrupt request framework, This allows - the driver to get DMA-like performance when there are either - no free DMA channels, or when doing transfers that required both - TX and RX data paths. - config SPI_S3C64XX tristate "Samsung S3C64XX/Exynos SoC series type SPI" depends on (PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST)
drivers/spi/Makefile +0 -2
@@ -109,8 +109,6 @@ obj-$(CONFIG_SPI_RB4XX) += spi-rb4xx.o obj-$(CONFIG_MACH_REALTEK_RTL) += spi-realtek-rtl.o obj-$(CONFIG_SPI_RPCIF) += spi-rpc-if.o obj-$(CONFIG_SPI_RSPI) += spi-rspi.o -obj-$(CONFIG_SPI_S3C24XX) += spi-s3c24xx-hw.o -spi-s3c24xx-hw-y := spi-s3c24xx.o obj-$(CONFIG_SPI_S3C64XX) += spi-s3c64xx.o obj-$(CONFIG_SPI_SC18IS602) += spi-sc18is602.o obj-$(CONFIG_SPI_SH) += spi-sh.o
drivers/spi/spi-s3c24xx-regs.h deleted +0 -0
drivers/spi/spi-s3c24xx.c deleted +0 -0
include/linux/spi/s3c24xx-fiq.h deleted +0 -0
include/linux/spi/s3c24xx.h deleted +0 -0
Signature · 1 line
2.29.2
Re: [PATCH 19/21] spi: remove s3c24xx driver
Quoted 6 lines · Arnd Bergmann
From: Arnd Bergmann <[email protected]>
The s3c24xx platform was removed,s o there are no remaining users for its spi driver.
Signed-off-by Arnd Bergmann <[email protected]>
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
PATCH 20/21 soc: s3c: remove pm-debug hack
In reply to Arnd BergmannFrom: Arnd Bergmann <[email protected]>
CONFIG_SAMSUNG_PM_DEBUG was only used on s3c24xx because of the DEBUG_S3C24XX_UART dependency. Since s3c24xx is now gone, and nobody ever noticed this option being missing from s3c64xx, it can be safely removed as well.
--- drivers/soc/samsung/Kconfig | 22 +-------- drivers/soc/samsung/Makefile | 1 - drivers/soc/samsung/s3c-pm-debug.c | 79 ------------------------------ 3 files changed, 1 insertion(+), 101 deletions(-) delete mode 100644 drivers/soc/samsung/s3c-pm-debug.c
drivers/soc/samsung/Kconfig +1 -21
@@ -52,29 +52,9 @@ config EXYNOS_PM_DOMAINS bool "Exynos PM domains" if COMPILE_TEST depends on (ARCH_EXYNOS && PM_GENERIC_DOMAINS) || COMPILE_TEST -config SAMSUNG_PM_DEBUG - bool "Samsung PM Suspend debug" - depends on PM && DEBUG_KERNEL - depends on PLAT_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210 - depends on DEBUG_S3C24XX_UART || DEBUG_S3C2410_UART - depends on DEBUG_LL && MMU - help - Say Y here if you want verbose debugging from the PM Suspend and - Resume code. See <file:Documentation/arm/samsung-s3c24xx/suspend.rst> - for more information. - -config S3C_PM_DEBUG_LED_SMDK - bool "SMDK LED suspend/resume debugging" - depends on PM && (MACH_SMDK6410) - help - Say Y here to enable the use of the SMDK LEDs on the baseboard - for debugging of the state of the suspend and resume process. - - Note, this currently only works for S3C64XX based SMDK boards. - config SAMSUNG_PM_CHECK bool "S3C2410 PM Suspend Memory CRC" - depends on PM && (PLAT_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210) + depends on PM && (ARCH_S3C64XX || ARCH_S5PV210) select CRC32 help Enable the PM code's memory area checksum over sleep. This option
drivers/soc/samsung/Makefile +0 -1
@@ -14,4 +14,3 @@ obj-$(CONFIG_EXYNOS_PM_DOMAINS) += pm_domains.o obj-$(CONFIG_EXYNOS_REGULATOR_COUPLER) += exynos-regulator-coupler.o obj-$(CONFIG_SAMSUNG_PM_CHECK) += s3c-pm-check.o -obj-$(CONFIG_SAMSUNG_PM_DEBUG) += s3c-pm-debug.o
drivers/soc/samsung/s3c-pm-debug.c deleted +0 -0
Signature · 1 line
2.29.2
Re: [PATCH 20/21] soc: s3c: remove pm-debug hack
Quoted 6 lines · Arnd Bergmann
From: Arnd Bergmann <[email protected]>
CONFIG_SAMSUNG_PM_DEBUGwas only used on s3c24xx because of theDEBUG_S3C24XX_UARTdependency. Since s3c24xx is now gone, and nobody ever noticed this option being missing from s3c64xx, it can be safely removed as well.
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
PATCH 21/21 ASoC: samsung: remove unused drivers
In reply to Arnd BergmannFrom: Arnd Bergmann <[email protected]>
The s3c24xx SoC platform was completely removed, as were most of the s3c64xx based board files, leaving only the DT based machines as well as the MACH_WLF_CRAGG_6410 machine. All other board specific ASoC driver can can now be recycled.
--- .../linux/platform_data/asoc-s3c24xx_simtec.h | 30 - include/sound/s3c24xx_uda134x.h | 14 - sound/soc/samsung/Kconfig | 93 --- sound/soc/samsung/Makefile | 26 - sound/soc/samsung/h1940_uda1380.c | 224 ------ sound/soc/samsung/jive_wm8750.c | 143 ---- sound/soc/samsung/neo1973_wm8753.c | 360 ---------- sound/soc/samsung/regs-i2s-v2.h | 111 --- sound/soc/samsung/regs-iis.h | 66 -- sound/soc/samsung/rx1950_uda1380.c | 245 ------- sound/soc/samsung/s3c-i2s-v2.c | 670 ------------------ sound/soc/samsung/s3c-i2s-v2.h | 108 --- sound/soc/samsung/s3c2412-i2s.c | 251 ------- sound/soc/samsung/s3c2412-i2s.h | 22 - sound/soc/samsung/s3c24xx-i2s.c | 463 ------------ sound/soc/samsung/s3c24xx-i2s.h | 31 - sound/soc/samsung/s3c24xx_simtec.c | 372 ---------- sound/soc/samsung/s3c24xx_simtec.h | 18 - sound/soc/samsung/s3c24xx_simtec_hermes.c | 112 --- .../soc/samsung/s3c24xx_simtec_tlv320aic23.c | 100 --- sound/soc/samsung/s3c24xx_uda134x.c | 257 ------- sound/soc/samsung/smartq_wm8987.c | 224 ------ sound/soc/samsung/smdk_wm8580.c | 211 ------ 23 files changed, 4151 deletions(-) delete mode 100644 include/linux/platform_data/asoc-s3c24xx_simtec.h delete mode 100644 include/sound/s3c24xx_uda134x.h delete mode 100644 sound/soc/samsung/h1940_uda1380.c delete mode 100644 sound/soc/samsung/jive_wm8750.c delete mode 100644 sound/soc/samsung/neo1973_wm8753.c delete mode 100644 sound/soc/samsung/regs-i2s-v2.h delete mode 100644 sound/soc/samsung/regs-iis.h delete mode 100644 sound/soc/samsung/rx1950_uda1380.c delete mode 100644 sound/soc/samsung/s3c-i2s-v2.c delete mode 100644 sound/soc/samsung/s3c-i2s-v2.h delete mode 100644 sound/soc/samsung/s3c2412-i2s.c delete mode 100644 sound/soc/samsung/s3c2412-i2s.h delete mode 100644 sound/soc/samsung/s3c24xx-i2s.c delete mode 100644 sound/soc/samsung/s3c24xx-i2s.h delete mode 100644 sound/soc/samsung/s3c24xx_simtec.c delete mode 100644 sound/soc/samsung/s3c24xx_simtec.h delete mode 100644 sound/soc/samsung/s3c24xx_simtec_hermes.c delete mode 100644 sound/soc/samsung/s3c24xx_simtec_tlv320aic23.c delete mode 100644 sound/soc/samsung/s3c24xx_uda134x.c delete mode 100644 sound/soc/samsung/smartq_wm8987.c delete mode 100644 sound/soc/samsung/smdk_wm8580.c
include/linux/platform_data/asoc-s3c24xx_simtec.h deleted +0 -0
include/sound/s3c24xx_uda134x.h deleted +0 -0
sound/soc/samsung/Kconfig +0 -93
111 lines not on this page · raw message
sound/soc/samsung/Makefile +0 -26
@@ -2,35 +2,19 @@ # S3c24XX Platform Support snd-soc-s3c-dma-objs := dmaengine.o snd-soc-idma-objs := idma.o -snd-soc-s3c24xx-i2s-objs := s3c24xx-i2s.o -snd-soc-s3c2412-i2s-objs := s3c2412-i2s.o -snd-soc-s3c-i2s-v2-objs := s3c-i2s-v2.o snd-soc-samsung-spdif-objs := spdif.o snd-soc-pcm-objs := pcm.o snd-soc-i2s-objs := i2s.o obj-$(CONFIG_SND_SOC_SAMSUNG) += snd-soc-s3c-dma.o -obj-$(CONFIG_SND_S3C24XX_I2S) += snd-soc-s3c24xx-i2s.o -obj-$(CONFIG_SND_S3C2412_SOC_I2S) += snd-soc-s3c2412-i2s.o -obj-$(CONFIG_SND_S3C_I2SV2_SOC) += snd-soc-s3c-i2s-v2.o obj-$(CONFIG_SND_SAMSUNG_SPDIF) += snd-soc-samsung-spdif.o obj-$(CONFIG_SND_SAMSUNG_PCM) += snd-soc-pcm.o obj-$(CONFIG_SND_SAMSUNG_I2S) += snd-soc-i2s.o obj-$(CONFIG_SND_SAMSUNG_I2S) += snd-soc-idma.o # S3C24XX Machine Support -snd-soc-jive-wm8750-objs := jive_wm8750.o -snd-soc-neo1973-wm8753-objs := neo1973_wm8753.o -snd-soc-s3c24xx-uda134x-objs := s3c24xx_uda134x.o -snd-soc-s3c24xx-simtec-objs := s3c24xx_simtec.o -snd-soc-s3c24xx-simtec-hermes-objs := s3c24xx_simtec_hermes.o -snd-soc-s3c24xx-simtec-tlv320aic23-objs := s3c24xx_simtec_tlv320aic23.o -snd-soc-h1940-uda1380-objs := h1940_uda1380.o -snd-soc-rx1950-uda1380-objs := rx1950_uda1380.o -snd-soc-smdk-wm8580-objs := smdk_wm8580.o snd-soc-smdk-wm8994-objs := smdk_wm8994.o snd-soc-snow-objs := snow.o -snd-soc-s3c64xx-smartq-wm8987-objs := smartq_wm8987.o snd-soc-smdk-spdif-objs := smdk_spdif.o snd-soc-smdk-wm8994pcm-objs := smdk_wm8994pcm.o snd-soc-speyside-objs := speyside.o
@@ -44,18 +28,8 @@ snd-soc-tm2-wm5110-objs := tm2_wm5110.o snd-soc-aries-wm8994-objs := aries_wm8994.o snd-soc-midas-wm1811-objs := midas_wm1811.o -obj-$(CONFIG_SND_SOC_SAMSUNG_JIVE_WM8750) += snd-soc-jive-wm8750.o -obj-$(CONFIG_SND_SOC_SAMSUNG_NEO1973_WM8753) += snd-soc-neo1973-wm8753.o -obj-$(CONFIG_SND_SOC_SAMSUNG_S3C24XX_UDA134X) += snd-soc-s3c24xx-uda134x.o -obj-$(CONFIG_SND_SOC_SAMSUNG_SIMTEC) += snd-soc-s3c24xx-simtec.o -obj-$(CONFIG_SND_SOC_SAMSUNG_SIMTEC_HERMES) += snd-soc-s3c24xx-simtec-hermes.o -obj-$(CONFIG_SND_SOC_SAMSUNG_SIMTEC_TLV320AIC23) += snd-soc-s3c24xx-simtec-tlv320aic23.o -obj-$(CONFIG_SND_SOC_SAMSUNG_H1940_UDA1380) += snd-soc-h1940-uda1380.o -obj-$(CONFIG_SND_SOC_SAMSUNG_RX1950_UDA1380) += snd-soc-rx1950-uda1380.o -obj-$(CONFIG_SND_SOC_SAMSUNG_SMDK_WM8580) += snd-soc-smdk-wm8580.o obj-$(CONFIG_SND_SOC_SAMSUNG_SMDK_WM8994) += snd-soc-smdk-wm8994.o obj-$(CONFIG_SND_SOC_SNOW) += snd-soc-snow.o -obj-$(CONFIG_SND_SOC_SMARTQ) += snd-soc-s3c64xx-smartq-wm8987.o obj-$(CONFIG_SND_SOC_SAMSUNG_SMDK_SPDIF) += snd-soc-smdk-spdif.o obj-$(CONFIG_SND_SOC_SMDK_WM8994_PCM) += snd-soc-smdk-wm8994pcm.o obj-$(CONFIG_SND_SOC_SPEYSIDE) += snd-soc-speyside.o
sound/soc/samsung/h1940_uda1380.c deleted +0 -0
sound/soc/samsung/jive_wm8750.c deleted +0 -0
sound/soc/samsung/neo1973_wm8753.c deleted +0 -0
sound/soc/samsung/regs-i2s-v2.h deleted +0 -0
sound/soc/samsung/regs-iis.h deleted +0 -0
sound/soc/samsung/rx1950_uda1380.c deleted +0 -0
sound/soc/samsung/s3c-i2s-v2.c deleted +0 -0
sound/soc/samsung/s3c-i2s-v2.h deleted +0 -0
sound/soc/samsung/s3c2412-i2s.c deleted +0 -0
sound/soc/samsung/s3c2412-i2s.h deleted +0 -0
sound/soc/samsung/s3c24xx-i2s.c deleted +0 -0
sound/soc/samsung/s3c24xx-i2s.h deleted +0 -0
sound/soc/samsung/s3c24xx_simtec.c deleted +0 -0
sound/soc/samsung/s3c24xx_simtec.h deleted +0 -0
sound/soc/samsung/s3c24xx_simtec_hermes.c deleted +0 -0
sound/soc/samsung/s3c24xx_simtec_tlv320aic23.c deleted +0 -0
sound/soc/samsung/s3c24xx_uda134x.c deleted +0 -0
sound/soc/samsung/smartq_wm8987.c deleted +0 -0
sound/soc/samsung/smdk_wm8580.c deleted +0 -0
Signature · 1 line
2.29.2
Re: [PATCH 21/21] ASoC: samsung: remove unused drivers
Quoted 9 lines · Arnd Bergmann
From: Arnd Bergmann <[email protected]>
The s3c24xx SoC platform was completely removed, as were most of the s3c64xx based board files, leaving only the DT based machines as well as the
MACH_WLF_CRAGG_6410machine. All other board specific ASoC driver can can now be recycled.Signed-off-by Arnd Bergmann <[email protected]>---
Best regards,
Krzysztof
Quoted 9 lines · Arnd Bergmann
From: Arnd Bergmann <[email protected]>
The s3c24xx platform was marked as deprecated a while ago, and for the s3c64xx platform, we marked all except one legacy board file as unused.
This series removes all of those, leaving only s3c64xx support for DT based boots as well as the cragg6410 board file.
Quoted 6 lines
About half of the s3c specific drivers were only used on the now removed machines, so these drivers can be retired as well. I can either merge the driver removal patches through the soc tree along with the board file patches, or subsystem maintainers can pick them up into their own trees, whichever they prefer.
Just to be sure - do you expect me to ack the series, or rather as usual pick them up?
Best regards,
Krzysztof
Arnd Bergmann
maintainerQuoted 17 lines · Krzysztof Kozlowski
Quoted 9 lines · Arnd Bergmann
From: Arnd Bergmann <[email protected]>
The s3c24xx platform was marked as deprecated a while ago, and for the s3c64xx platform, we marked all except one legacy board file as unused.
This series removes all of those, leaving only s3c64xx support for DT based boots as well as the cragg6410 board file.
Quoted 6 lines
About half of the s3c specific drivers were only used on the now removed machines, so these drivers can be retired as well. I can either merge the driver removal patches through the soc tree along with the board file patches, or subsystem maintainers can pick them up into their own trees, whichever they prefer.
Quoted 2 lines
Just to be sure - do you expect me to ack the series, or rather as usual pick them up?
I think in this case it is easier if I pick them up with your Ack along with the other platforms I posted, as there are some minor conflicts between Makefile/Kconfig changes where I remove adjacent lines.
Arnd
Rob Herring
maintainerQuoted 15 lines · Arnd Bergmann
From: Arnd Bergmann <[email protected]>
The s3c24xx platform was marked as deprecated a while ago, and for the s3c64xx platform, we marked all except one legacy board file as unused.
This series removes all of those, leaving only s3c64xx support for DT based boots as well as the cragg6410 board file.
About half of the s3c specific drivers were only used on the now removed machines, so these drivers can be retired as well. I can either merge the driver removal patches through the soc tree along with the board file patches, or subsystem maintainers can pick them up into their own trees, whichever they prefer.
[...]
Quoted 6 lines
Documentation/arm/index.rst | 1 - Documentation/arm/samsung-s3c24xx/cpufreq.rst | 77 - .../arm/samsung-s3c24xx/eb2410itx.rst | 59 - Documentation/arm/samsung-s3c24xx/gpio.rst | 172 -- Documentation/arm/samsung-s3c24xx/h1940.rst | 41 - Documentation/arm/samsung-s3c24xx/index.rst | 20 -
Quoted 8 lines
Documentation/arm/samsung-s3c24xx/nand.rst | 30 - .../arm/samsung-s3c24xx/overview.rst | 311 --- Documentation/arm/samsung-s3c24xx/s3c2412.rst | 121 - Documentation/arm/samsung-s3c24xx/s3c2413.rst | 22 - .../arm/samsung-s3c24xx/smdk2440.rst | 57 - Documentation/arm/samsung-s3c24xx/suspend.rst | 137 -- .../arm/samsung-s3c24xx/usb-host.rst | 91 - Documentation/arm/samsung/overview.rst | 13 -
What about?:
Documentation/devicetree/bindings/clock/samsung,s3c2410-clock.txt Documentation/devicetree/bindings/interrupt-controller/samsung,s3c24xx-irq.txt Documentation/devicetree/bindings/mmc/samsung,s3cmci.txt Documentation/devicetree/bindings/mtd/samsung-s3c2410.txt Documentation/devicetree/bindings/usb/s3c2410-usb.txt
Rob
Arnd Bergmann
maintainerQuoted 34 lines · Rob Herring
Quoted 15 lines · Arnd Bergmann
From: Arnd Bergmann <[email protected]>
The s3c24xx platform was marked as deprecated a while ago, and for the s3c64xx platform, we marked all except one legacy board file as unused.
This series removes all of those, leaving only s3c64xx support for DT based boots as well as the cragg6410 board file.
About half of the s3c specific drivers were only used on the now removed machines, so these drivers can be retired as well. I can either merge the driver removal patches through the soc tree along with the board file patches, or subsystem maintainers can pick them up into their own trees, whichever they prefer.
[...]
Quoted 6 lines
Documentation/arm/index.rst | 1 - Documentation/arm/samsung-s3c24xx/cpufreq.rst | 77 - .../arm/samsung-s3c24xx/eb2410itx.rst | 59 - Documentation/arm/samsung-s3c24xx/gpio.rst | 172 -- Documentation/arm/samsung-s3c24xx/h1940.rst | 41 - Documentation/arm/samsung-s3c24xx/index.rst | 20 -Quoted 8 lines
Documentation/arm/samsung-s3c24xx/nand.rst | 30 - .../arm/samsung-s3c24xx/overview.rst | 311 --- Documentation/arm/samsung-s3c24xx/s3c2412.rst | 121 - Documentation/arm/samsung-s3c24xx/s3c2413.rst | 22 - .../arm/samsung-s3c24xx/smdk2440.rst | 57 - Documentation/arm/samsung-s3c24xx/suspend.rst | 137 -- .../arm/samsung-s3c24xx/usb-host.rst | 91 - Documentation/arm/samsung/overview.rst | 13 -
Quoted 5 lines
What about?:
Documentation/devicetree/bindings/clock/samsung,s3c2410-clock.txtDocumentation/devicetree/bindings/interrupt-controller/samsung,s3c24xx-irq.txtDocumentation/devicetree/bindings/mmc/samsung,s3cmci.txt
Good catch!
I've removed these three now and and will add the removal to the same patch, also the related samsung,s3c2412-clock.txt and samsung,s3c2443-clock.txt files.
Quoted 1 line
Documentation/devicetree/bindings/mtd/samsung-s3c2410.txt
samsung,s3c2412-nand is apparently still used on s3c6400, and the driver is selectable on that platform, so I think that should remain in there until we remove s3c64xx in 2024, even if it is not referenced by the dts files in the kernel.
Quoted 1 line
Documentation/devicetree/bindings/usb/s3c2410-usb.txt
Similarly, the driver is used on the crag6410 board (without DT), and probably just works with the DT based boards if one adds a node to s3c64xx.dtsi.
I've also checked if any of the other removed drivers matches of_device_id[] strings to see if there are more bindings to kill off, but I don't see any that have now become obsolete. It did point me to pxa2xx_ac97_dt_ids, which Robert already complained about, this apparently is still used with dts files outside of mainline.
Arnd
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/