4.14.296-rc1 review

From: Alexander Coffin <[email protected]>

[ Upstream commit 3f42faf6db431e04bf942d2ebe3ae88975723478 ]

may be schedule, and then complete before the line

[   46.912801] ==================================================================
[   46.920552] BUG: KASAN: use-after-free in brcmf_netdev_start_xmit+0x718/0x8c8 [brcmfmac]
[   46.928673] Read of size 4 at addr ffffff803f5882e8 by task systemd-resolve/328
[   46.935991]
[   46.937514] CPU: 1 PID: 328 Comm: systemd-resolve Tainted: G           O      5.4.199-[REDACTED] #1
[   46.947255] Hardware name: [REDACTED]
[   46.954568] Call trace:
[   46.957037]  dump_backtrace+0x0/0x2b8
[   46.960719]  show_stack+0x24/0x30
[   46.964052]  dump_stack+0x128/0x194
[   46.967557]  print_address_description.isra.0+0x64/0x380
[   46.972877]  __kasan_report+0x1d4/0x240
[   46.976723]  kasan_report+0xc/0x18
[   46.980138]  __asan_report_load4_noabort+0x18/0x20
[   46.985027]  brcmf_netdev_start_xmit+0x718/0x8c8 [brcmfmac]
[   46.990613]  dev_hard_start_xmit+0x1bc/0xda0
[   46.994894]  sch_direct_xmit+0x198/0xd08
[   46.998827]  __qdisc_run+0x37c/0x1dc0
[   47.002500]  __dev_queue_xmit+0x1528/0x21f8
[   47.006692]  dev_queue_xmit+0x24/0x30
[   47.010366]  neigh_resolve_output+0x37c/0x678
[   47.014734]  ip_finish_output2+0x598/0x2458
[   47.018927]  __ip_finish_output+0x300/0x730
[   47.023118]  ip_output+0x2e0/0x430
[   47.026530]  ip_local_out+0x90/0x140
[   47.030117]  igmpv3_sendpack+0x14c/0x228
[   47.034049]  igmpv3_send_cr+0x384/0x6b8
[   47.037895]  igmp_ifc_timer_expire+0x4c/0x118
[   47.042262]  call_timer_fn+0x1cc/0xbe8
[   47.046021]  __run_timers+0x4d8/0xb28
[   47.049693]  run_timer_softirq+0x24/0x40
[   47.053626]  __do_softirq+0x2c0/0x117c
[   47.057387]  irq_exit+0x2dc/0x388
[   47.060715]  __handle_domain_irq+0xb4/0x158
[   47.064908]  gic_handle_irq+0x58/0xb0
[   47.068581]  el0_irq_naked+0x50/0x5c
[   47.072162]
[   47.073665] Allocated by task 328:
[   47.077083]  save_stack+0x24/0xb0
[   47.080410]  __kasan_kmalloc.isra.0+0xc0/0xe0
[   47.084776]  kasan_slab_alloc+0x14/0x20
[   47.088622]  kmem_cache_alloc+0x15c/0x468
[   47.092643]  __alloc_skb+0xa4/0x498
[   47.096142]  igmpv3_newpack+0x158/0xd78
[   47.099987]  add_grhead+0x210/0x288
[   47.103485]  add_grec+0x6b0/0xb70
[   47.106811]  igmpv3_send_cr+0x2e0/0x6b8
[   47.110657]  igmp_ifc_timer_expire+0x4c/0x118
[   47.115027]  call_timer_fn+0x1cc/0xbe8
[   47.118785]  __run_timers+0x4d8/0xb28
[   47.122457]  run_timer_softirq+0x24/0x40
[   47.126389]  __do_softirq+0x2c0/0x117c
[   47.130142]
[   47.131643] Freed by task 180:
[   47.134712]  save_stack+0x24/0xb0
[   47.138041]  __kasan_slab_free+0x108/0x180
[   47.142146]  kasan_slab_free+0x10/0x18
[   47.145904]  slab_free_freelist_hook+0xa4/0x1b0
[   47.150444]  kmem_cache_free+0x8c/0x528
[   47.154292]  kfree_skbmem+0x94/0x108
[   47.157880]  consume_skb+0x10c/0x5a8
[   47.161466]  __dev_kfree_skb_any+0x88/0xa0
[   47.165598]  brcmu_pkt_buf_free_skb+0x44/0x68 [brcmutil]
[   47.171023]  brcmf_txfinalize+0xec/0x190 [brcmfmac]
[   47.176016]  brcmf_proto_bcdc_txcomplete+0x1c0/0x210 [brcmfmac]
[   47.182056]  brcmf_sdio_sendfromq+0x8dc/0x1e80 [brcmfmac]
[   47.187568]  brcmf_sdio_dpc+0xb48/0x2108 [brcmfmac]
[   47.192529]  brcmf_sdio_dataworker+0xc8/0x238 [brcmfmac]
[   47.197859]  process_one_work+0x7fc/0x1a80
[   47.201965]  worker_thread+0x31c/0xc40
[   47.205726]  kthread+0x2d8/0x370
[   47.208967]  ret_from_fork+0x10/0x18
[   47.212546]
[   47.214051] The buggy address belongs to the object at ffffff803f588280
[   47.214051]  which belongs to the cache skbuff_head_cache of size 208
[   47.227086] The buggy address is located 104 bytes inside of
[   47.227086]  208-byte region [ffffff803f588280, ffffff803f588350)
[   47.238814] The buggy address belongs to the page:
[   47.243618] page:ffffffff00dd6200 refcount:1 mapcount:0 mapping:ffffff804b6bf800 index:0xffffff803f589900 compound_mapcount: 0
[   47.255007] flags: 0x10200(slab|head)
[   47.258689] raw: 0000000000010200 ffffffff00dfa980 0000000200000002 ffffff804b6bf800
[   47.266439] raw: ffffff803f589900 0000000080190018 00000001ffffffff 0000000000000000
[   47.274180] page dumped because: kasan: bad access detected
[   47.279752]
[   47.281251] Memory state around the buggy address:
[   47.286051]  ffffff803f588180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[   47.293277]  ffffff803f588200: fb fb fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[   47.300502] >ffffff803f588280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[   47.307723]                                                           ^
[   47.314343]  ffffff803f588300: fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc fc
[   47.321569]  ffffff803f588380: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb
[   47.328789] ==================================================================

---
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

index 590bef2defb9..9c8102be1d0b 100644
@@ -200,6 +200,7 @@ static netdev_tx_t brcmf_netdev_start_xmit(struct sk_buff *skb,
 	struct brcmf_pub *drvr = ifp->drvr;
 	struct ethhdr *eh;
 	int head_delta;
+	unsigned int tx_bytes = skb->len;
 
 	brcmf_dbg(DATA, "Enter, bsscfgidx=%d\n", ifp->bsscfgidx);
 

@@ -254,7 +255,7 @@ static netdev_tx_t brcmf_netdev_start_xmit(struct sk_buff *skb,
 		ndev->stats.tx_dropped++;
 	} else {
 		ndev->stats.tx_packets++;
-		ndev->stats.tx_bytes += skb->len;
+		ndev->stats.tx_bytes += tx_bytes;
 	}
 
 	/* Return ok: we always eat the packet */

2.35.1

From: Tetsuo Handa <[email protected]>

[ Upstream commit 2d2cb3066f2c90cd8ca540b36ba7a55e7f2406e0 ]

syzbot is reporting cancel_delayed_work() without INIT_DELAYED_WORK() at l2cap_chan_del() [1], for CONF_NOT_COMPLETE flag (which meant to prevent l2cap_chan_del() from calling cancel_delayed_work()) is cleared by timer which fires before l2cap_chan_del() is called by closing file descriptor created by socket(AF_BLUETOOTH, SOCK_STREAM, BTPROTO_L2CAP).

l2cap_bredr_sig_cmd(L2CAP_CONF_REQ) and l2cap_bredr_sig_cmd(L2CAP_CONF_RSP) are calling l2cap_ertm_init(chan), and they call l2cap_chan_ready() (which clears CONF_NOT_COMPLETE flag) only when l2cap_ertm_init(chan) succeeded.

l2cap_sock_init() does not call l2cap_ertm_init(chan), and it instead sets CONF_NOT_COMPLETE flag by calling l2cap_chan_set_defaults(). However, when connect() is requested, "command 0x0409 tx timeout" happens after 2 seconds
from connect() request, and CONF_NOT_COMPLETE flag is cleared after 4
seconds from connect() request, for l2cap_conn_start() from l2cap_info_timeout() callback scheduled by

  schedule_delayed_work(&conn->info_timer, L2CAP_INFO_TIMEOUT);

in l2cap_connect() is calling l2cap_chan_ready().

Fix this problem by initializing delayed works used by L2CAP_MODE_ERTM mode as soon as l2cap_chan_create() allocates a channel, like I did in commit be8597239379f0f5 ("Bluetooth: initialize skb_queue_head at l2cap_chan_create()").

---
 net/bluetooth/l2cap_core.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

index e45a12378bd1..75a76353525c 100644
@@ -63,6 +63,9 @@ static void l2cap_send_disconn_req(struct l2cap_chan *chan, int err);
 
 static void l2cap_tx(struct l2cap_chan *chan, struct l2cap_ctrl *control,
 		     struct sk_buff_head *skbs, u8 event);
+static void l2cap_retrans_timeout(struct work_struct *work);
+static void l2cap_monitor_timeout(struct work_struct *work);
+static void l2cap_ack_timeout(struct work_struct *work);
 
 static inline u8 bdaddr_type(u8 link_type, u8 bdaddr_type)
 {

@@ -470,6 +473,9 @@ struct l2cap_chan *l2cap_chan_create(void)
 	write_unlock(&chan_list_lock);
 
 	INIT_DELAYED_WORK(&chan->chan_timer, l2cap_chan_timeout);
+	INIT_DELAYED_WORK(&chan->retrans_timer, l2cap_retrans_timeout);
+	INIT_DELAYED_WORK(&chan->monitor_timer, l2cap_monitor_timeout);
+	INIT_DELAYED_WORK(&chan->ack_timer, l2cap_ack_timeout);
 
 	chan->state = BT_OPEN;
 

@@ -3154,10 +3160,6 @@ int l2cap_ertm_init(struct l2cap_chan *chan)
 	chan->rx_state = L2CAP_RX_STATE_RECV;
 	chan->tx_state = L2CAP_TX_STATE_XMIT;
 
-	INIT_DELAYED_WORK(&chan->retrans_timer, l2cap_retrans_timeout);
-	INIT_DELAYED_WORK(&chan->monitor_timer, l2cap_monitor_timeout);
-	INIT_DELAYED_WORK(&chan->ack_timer, l2cap_ack_timeout);
-
 	skb_queue_head_init(&chan->srej_q);
 
 	err = l2cap_seq_list_init(&chan->srej_list, chan->tx_win);

2.35.1

From: Luiz Augusto von Dentz <[email protected]>

[ Upstream commit 448a496f760664d3e2e79466aa1787e6abc922b5 ]

device_add shall not be called multiple times as stated in its documentation:

'Do not call this routine or device_register() more than once for any device structure'

Syzkaller reports a bug as follows [1]:

------------[ cut here ]------------
kernel BUG at lib/list_debug.c:33!
invalid opcode: 0000 [#1] PREEMPT SMP KASAN
[...]
Call Trace:
 <TASK>
 __list_add include/linux/list.h:69 [inline]
 list_add_tail include/linux/list.h:102 [inline]
 kobj_kset_join lib/kobject.c:164 [inline]
 kobject_add_internal+0x18f/0x8f0 lib/kobject.c:214
 kobject_add_varg lib/kobject.c:358 [inline]
 kobject_add+0x150/0x1c0 lib/kobject.c:410
 device_add+0x368/0x1e90 drivers/base/core.c:3452
 hci_conn_add_sysfs+0x9b/0x1b0 net/bluetooth/hci_sysfs.c:53
 hci_le_cis_estabilished_evt+0x57c/0xae0 net/bluetooth/hci_event.c:6799
 hci_le_meta_evt+0x2b8/0x510 net/bluetooth/hci_event.c:7110
 hci_event_func net/bluetooth/hci_event.c:7440 [inline]
 hci_event_packet+0x63d/0xfd0 net/bluetooth/hci_event.c:7495
 hci_rx_work+0xae7/0x1230 net/bluetooth/hci_core.c:4007
 process_one_work+0x991/0x1610 kernel/workqueue.c:2289
 worker_thread+0x665/0x1080 kernel/workqueue.c:2436
 kthread+0x2e4/0x3a0 kernel/kthread.c:376
 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306
 </TASK>

---
 net/bluetooth/hci_sysfs.c | 3 +++
 1 file changed, 3 insertions(+)

index b568f7c21b30..0c9249339790 100644
@@ -48,6 +48,9 @@ void hci_conn_add_sysfs(struct hci_conn *conn)
 
 	BT_DBG("conn %p", conn);
 
+	if (device_is_registered(&conn->dev))
+		return;
+
 	dev_set_name(&conn->dev, "%s:%d", hdev->name, conn->handle);
 
 	if (device_add(&conn->dev) < 0) {

2.35.1

From: Ziyang Xuan <[email protected]>

[ Upstream commit 3fd7bfd28cfd68ae80a2fe92ea1615722cc2ee6e ]

If can_send() fail, it should not update frames_abs counter in bcm_can_tx(). Add the result check for can_send() in bcm_can_tx().

---
 net/can/bcm.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

index b3f3b02ffd42..89b955ef75d1 100644
@@ -286,6 +286,7 @@ static void bcm_can_tx(struct bcm_op *op)
 	struct sk_buff *skb;
 	struct net_device *dev;
 	struct canfd_frame *cf = op->frames + op->cfsiz * op->currframe;
+	int err;
 
 	/* no target device? => exit */
 	if (!op->ifindex)

@@ -310,11 +311,11 @@ static void bcm_can_tx(struct bcm_op *op)
 	/* send with loopback */
 	skb->dev = dev;
 	can_skb_set_owner(skb, op->sk);
-	can_send(skb, 1);
+	err = can_send(skb, 1);
+	if (!err)
+		op->frames_abs++;
 
-	/* update statistics */
 	op->currframe++;
-	op->frames_abs++;
 
 	/* reached last frame? */
 	if (op->currframe >= op->nframes)

2.35.1

From: Daniel Golle <[email protected]>

[ Upstream commit d3aad83d05aec0cfd7670cf0028f2ad4b81de92e ]

The function rt2800_iq_calibrate is intended for Rt5592 only. Don't call it for MT7620 which has it's own calibration functions.

---
 drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

index d2c289446c00..1309c136f7f3 100644
@@ -3835,7 +3835,8 @@ static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev,
 		reg += 2 * rt2x00dev->lna_gain;
 		rt2800_bbp_write_with_rx_chain(rt2x00dev, 66, reg);
 
-		rt2800_iq_calibrate(rt2x00dev, rf->channel);
+		if (rt2x00_rt(rt2x00dev, RT5592))
+			rt2800_iq_calibrate(rt2x00dev, rf->channel);
 	}
 
 	bbp = rt2800_bbp_read(rt2x00dev, 4);

2.35.1

All tests passing for Tegra ...

Test results for stable-v4.14:

    8 builds:	8 pass, 0 fail
    16 boots:	16 pass, 0 fail
    32 tests:	32 pass, 0 fail

Linux version: 4.14.296-rc1-ga6ecd3a0366a
Boards tested: tegra124-jetson-tk1, tegra20-ventana,

                tegra210-p2371-2180, tegra30-cardhu-a04

Jon

From: Daniel Golle <[email protected]>

[ Upstream commit eeb50acf15762b61921f9df18663f839f387c054 ]

Set correct TX_SW_CFG1 MAC register as it is done also in v3 of the vendor driver[1].

[1]: https://gitlab.com/dm38/padavan-ng/-/blob/master/trunk/proprietary/rt_wifi/rtpci/3.0.X.X/mt76x2/chips/rt6352.c#L531

---
 drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index 1309c136f7f3..0c90bf0540b9 100644
@@ -5315,7 +5315,7 @@ static int rt2800_init_registers(struct rt2x00_dev *rt2x00dev)
 		rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000404);
 	} else if (rt2x00_rt(rt2x00dev, RT6352)) {
 		rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000401);
-		rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x000C0000);
+		rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x000C0001);
 		rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00000000);
 		rt2800_register_write(rt2x00dev, MIMO_PS_CFG, 0x00000002);
 		rt2800_register_write(rt2x00dev, TX_PIN_CFG, 0x00150F0F);

2.35.1

From: Daniel Golle <[email protected]>

[ Upstream commit cbde6ed406a51092d9e8a2df058f5f8490f27443 ]

Instead of using the default value 33 (pci), set US_CYC_CNT init based on Programming guide:
If available, set chipset bus clock with fallback to cpu clock/3.

---
 .../net/wireless/ralink/rt2x00/rt2800lib.c    | 21 +++++++++++++++++++
 1 file changed, 21 insertions(+)

index 0c90bf0540b9..57fa472b5c4e 100644
@@ -5567,6 +5567,27 @@ static int rt2800_init_registers(struct rt2x00_dev *rt2x00dev)
 		reg = rt2800_register_read(rt2x00dev, US_CYC_CNT);
 		rt2x00_set_field32(&reg, US_CYC_CNT_CLOCK_CYCLE, 125);
 		rt2800_register_write(rt2x00dev, US_CYC_CNT, reg);
+	} else if (rt2x00_is_soc(rt2x00dev)) {
+		struct clk *clk = clk_get_sys("bus", NULL);
+		int rate;
+
+		if (IS_ERR(clk)) {
+			clk = clk_get_sys("cpu", NULL);
+
+			if (IS_ERR(clk)) {
+				rate = 125;
+			} else {
+				rate = clk_get_rate(clk) / 3000000;
+				clk_put(clk);
+			}
+		} else {
+			rate = clk_get_rate(clk) / 1000000;
+			clk_put(clk);
+		}
+
+		reg = rt2800_register_read(rt2x00dev, US_CYC_CNT);
+		rt2x00_set_field32(&reg, US_CYC_CNT_CLOCK_CYCLE, rate);
+		rt2800_register_write(rt2x00dev, US_CYC_CNT, reg);
 	}
 
 	reg = rt2800_register_read(rt2x00dev, HT_FBK_CFG0);

2.35.1

From: Daniel Golle <[email protected]>

[ Upstream commit c9aada64fe6493461127f1522d7e2f01792d2424 ]

Instead of 0 set the correct value for BBP register 86 for MT7620.

---
 drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

index 57fa472b5c4e..155c08dc2e0e 100644
@@ -3655,7 +3655,10 @@ static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev,
 		rt2800_bbp_write(rt2x00dev, 62, 0x37 - rt2x00dev->lna_gain);
 		rt2800_bbp_write(rt2x00dev, 63, 0x37 - rt2x00dev->lna_gain);
 		rt2800_bbp_write(rt2x00dev, 64, 0x37 - rt2x00dev->lna_gain);
-		rt2800_bbp_write(rt2x00dev, 86, 0);
+		if (rt2x00_rt(rt2x00dev, RT6352))
+			rt2800_bbp_write(rt2x00dev, 86, 0x38);
+		else
+			rt2800_bbp_write(rt2x00dev, 86, 0);
 	}
 
 	if (rf->channel <= 14) {

2.35.1

From: Liu Jian <[email protected]>

[ Upstream commit 3f8ef65af927db247418d4e1db49164d7a158fc5 ]

Fixes the below NULL pointer dereference:

[...]

  [   14.471200] Call Trace:
  [   14.471562]  <TASK>
  [   14.471882]  lock_acquire+0x245/0x2e0
  [   14.472416]  ? remove_wait_queue+0x12/0x50
  [   14.473014]  ? _raw_spin_lock_irqsave+0x17/0x50
  [   14.473681]  _raw_spin_lock_irqsave+0x3d/0x50
  [   14.474318]  ? remove_wait_queue+0x12/0x50
  [   14.474907]  remove_wait_queue+0x12/0x50
  [   14.475480]  sk_stream_wait_memory+0x20d/0x340
  [   14.476127]  ? do_wait_intr_irq+0x80/0x80
  [   14.476704]  do_tcp_sendpages+0x287/0x600
  [   14.477283]  tcp_bpf_push+0xab/0x260
  [   14.477817]  tcp_bpf_sendmsg_redir+0x297/0x500
  [   14.478461]  ? __local_bh_enable_ip+0x77/0xe0
  [   14.479096]  tcp_bpf_send_verdict+0x105/0x470
  [   14.479729]  tcp_bpf_sendmsg+0x318/0x4f0
  [   14.480311]  sock_sendmsg+0x2d/0x40
  [   14.480822]  ____sys_sendmsg+0x1b4/0x1c0
  [   14.481390]  ? copy_msghdr_from_user+0x62/0x80
  [   14.482048]  ___sys_sendmsg+0x78/0xb0
  [   14.482580]  ? vmf_insert_pfn_prot+0x91/0x150
  [   14.483215]  ? __do_fault+0x2a/0x1a0
  [   14.483738]  ? do_fault+0x15e/0x5d0
  [   14.484246]  ? __handle_mm_fault+0x56b/0x1040
  [   14.484874]  ? lock_is_held_type+0xdf/0x130
  [   14.485474]  ? find_held_lock+0x2d/0x90
  [   14.486046]  ? __sys_sendmsg+0x41/0x70
  [   14.486587]  __sys_sendmsg+0x41/0x70
  [   14.487105]  ? intel_pmu_drain_pebs_core+0x350/0x350
  [   14.487822]  do_syscall_64+0x34/0x80
  [   14.488345]  entry_SYSCALL_64_after_hwframe+0x63/0xcd
  [...]

The test scenario has the following flow:

thread1 thread2
----------- ---------------
tcp_bpf_sendmsg
tcp_bpf_send_verdict
tcp_bpf_sendmsg_redir sock_close

    tcp_bpf_push_locked                 __sock_release
     tcp_bpf_push                         //inet_release
      do_tcp_sendpages                    sock->ops->release
       sk_stream_wait_memory          	   // tcp_close
          sk_wait_event                      sk->sk_prot->close
           release_sock(__sk);
            ***
                                                lock_sock(sk);
                                                  __tcp_close
                                                    sock_orphan(sk)
                                                      sk->sk_wq  = NULL
                                                release_sock
            ****
           lock_sock(__sk);
          remove_wait_queue(sk_sleep(sk), &wait);
             sk_sleep(sk)
             //NULL pointer dereference
             &rcu_dereference_raw(sk->sk_wq)->wait

While waiting for memory in thread1, the socket is released with its wait queue because thread2 has closed it. This caused by tcp_bpf_send_verdict didn't increase the f_count of psock->sk_redir->sk_socket->file in thread1.

We should check if SOCK_DEAD flag is set on wakeup in sk_stream_wait_memory before accessing the wait queue.

---
 net/core/stream.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

index cbe52b169070..e5c6c9e5e0aa 100644
@@ -159,7 +159,8 @@ int sk_stream_wait_memory(struct sock *sk, long *timeo_p)
 		*timeo_p = current_timeo;
 	}
 out:
-	remove_wait_queue(sk_sleep(sk), &wait);
+	if (!sock_flag(sk, SOCK_DEAD))
+		remove_wait_queue(sk_sleep(sk), &wait);
 	return err;
 
 do_error:

2.35.1

From: Luiz Augusto von Dentz <[email protected]>

[ Upstream commit 35fcbc4243aad7e7d020b7c1dfb14bb888b20a4f ]

This uses l2cap_chan_hold_unless_zero() after calling __l2cap_get_chan_blah() to prevent the following trace:

Bluetooth: l2cap_core.c:static void l2cap_chan_destroy(struct kref *kref)
Bluetooth: chan 0000000023c4974d
Bluetooth: parent 00000000ae861c08
==================================================================

BUG: KASAN: use-after-free in __mutex_waiter_is_first
kernel/locking/mutex.c:191 [inline]
BUG: KASAN: use-after-free in __mutex_lock_common
kernel/locking/mutex.c:671 [inline]
BUG: KASAN: use-after-free in __mutex_lock+0x278/0x400
kernel/locking/mutex.c:729
Read of size 8 at addr ffff888006a49b08 by task kworker/u3:2/389

---
 net/bluetooth/l2cap_core.c | 7 +++++++
 1 file changed, 7 insertions(+)

index 75a76353525c..652c0723051b 100644
@@ -4049,6 +4049,12 @@ static int l2cap_connect_create_rsp(struct l2cap_conn *conn,
 		}
 	}
 
+	chan = l2cap_chan_hold_unless_zero(chan);
+	if (!chan) {
+		err = -EBADSLT;
+		goto unlock;
+	}
+
 	err = 0;
 
 	l2cap_chan_lock(chan);

@@ -4078,6 +4084,7 @@ static int l2cap_connect_create_rsp(struct l2cap_conn *conn,
 	}
 
 	l2cap_chan_unlock(chan);
+	l2cap_chan_put(chan);
 
 unlock:
 	mutex_unlock(&conn->chan_lock);

2.35.1

From: Andrew Gaul <[email protected]>

[ Upstream commit 93e2be344a7db169b7119de21ac1bf253b8c6907 ]

My system shows almost 10 million of these messages over a 24-hour period which pollutes my logs.

---
 drivers/net/usb/r8152.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

index a5a4fef09b93..1ed358d0da84 100644
@@ -1382,7 +1382,9 @@ static void intr_callback(struct urb *urb)
 			   "Stop submitting intr, status %d\n", status);
 		return;
 	case -EOVERFLOW:
-		netif_info(tp, intr, tp->netdev, "intr status -EOVERFLOW\n");
+		if (net_ratelimit())
+			netif_info(tp, intr, tp->netdev,
+				   "intr status -EOVERFLOW\n");
 		goto resubmit;
 	/* -EPIPE:  should clear the halt */
 	default:

2.35.1

From: Javier Martinez Canillas <[email protected]>

[ Upstream commit 94dc3471d1b2b58b3728558d0e3f264e9ce6ff59 ]

The strlen() function returns a size_t which is an unsigned int on 32-bit arches and an unsigned long on 64-bit arches. But in the drm_copy_field() function, the strlen() return value is assigned to an 'int len' variable.

Later, the len variable is passed as copy_from_user() third argument that is an unsigned long parameter as well.

In theory, this can lead to an integer overflow via type conversion. Since the assignment happens to a signed int lvalue instead of a size_t lvalue.

In practice though, that's unlikely since the values copied are set by DRM drivers and not controlled by userspace. But using a size_t for len is the correct thing to do anyways.

---
 drivers/gpu/drm/drm_ioctl.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index ce26e8fea9c2..335fad8b209a 100644
@@ -437,7 +437,7 @@ EXPORT_SYMBOL(drm_invalid_op);
  */
 static int drm_copy_field(char __user *buf, size_t *buf_len, const char *value)
 {
-	int len;
+	size_t len;
 
 	/* don't overflow userbuf */
 	len = strlen(value);

2.35.1

From: Javier Martinez Canillas <[email protected]>

[ Upstream commit f6ee30407e883042482ad4ad30da5eaba47872ee ]

There are some struct drm_driver fields that are required by drivers since drm_copy_field() attempts to copy them to user-space via DRM_IOCTL_VERSION.

But it can be possible that a driver has a bug and did not set some of the fields, which leads to drm_copy_field() attempting to copy a NULL pointer:

[ +10.395966] Unable to handle kernel access to user memory outside uaccess routines at virtual address 0000000000000000

[  +0.010955] Mem abort info:
[  +0.002835]   ESR = 0x0000000096000004
[  +0.003872]   EC = 0x25: DABT (current EL), IL = 32 bits
[  +0.005395]   SET = 0, FnV = 0
[  +0.003113]   EA = 0, S1PTW = 0
[  +0.003182]   FSC = 0x04: level 0 translation fault
[  +0.004964] Data abort info:
[  +0.002919]   ISV = 0, ISS = 0x00000004
[  +0.003886]   CM = 0, WnR = 0
[  +0.003040] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000115dad000
[  +0.006536] [0000000000000000] pgd=0000000000000000, p4d=0000000000000000
[  +0.006925] Internal error: Oops: 96000004 [#1] SMP
...
[  +0.011113] pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[  +0.007061] pc : __pi_strlen+0x14/0x150
[  +0.003895] lr : drm_copy_field+0x30/0x1a4
[  +0.004156] sp : ffff8000094b3a50
[  +0.003355] x29: ffff8000094b3a50 x28: ffff8000094b3b70 x27: 0000000000000040
[  +0.007242] x26: ffff443743c2ba00 x25: 0000000000000000 x24: 0000000000000040
[  +0.007243] x23: ffff443743c2ba00 x22: ffff8000094b3b70 x21: 0000000000000000
[  +0.007241] x20: 0000000000000000 x19: ffff8000094b3b90 x18: 0000000000000000
[  +0.007241] x17: 0000000000000000 x16: 0000000000000000 x15: 0000aaab14b9af40
[  +0.007241] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
[  +0.007239] x11: 0000000000000000 x10: 0000000000000000 x9 : ffffa524ad67d4d8
[  +0.007242] x8 : 0101010101010101 x7 : 7f7f7f7f7f7f7f7f x6 : 6c6e6263606e7141
[  +0.007239] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000
[  +0.007241] x2 : 0000000000000000 x1 : ffff8000094b3b90 x0 : 0000000000000000
[  +0.007240] Call trace:
[  +0.002475]  __pi_strlen+0x14/0x150
[  +0.003537]  drm_version+0x84/0xac
[  +0.003448]  drm_ioctl_kernel+0xa8/0x16c
[  +0.003975]  drm_ioctl+0x270/0x580
[  +0.003448]  __arm64_sys_ioctl+0xb8/0xfc
[  +0.003978]  invoke_syscall+0x78/0x100
[  +0.003799]  el0_svc_common.constprop.0+0x4c/0xf4
[  +0.004767]  do_el0_svc+0x38/0x4c
[  +0.003357]  el0_svc+0x34/0x100
[  +0.003185]  el0t_64_sync_handler+0x11c/0x150
[  +0.004418]  el0t_64_sync+0x190/0x194
[  +0.003716] Code: 92402c04 b200c3e8 f13fc09f 5400088c (a9400c02)
[  +0.006180] ---[ end trace 0000000000000000 ]---

---
 drivers/gpu/drm/drm_ioctl.c | 6 ++++++
 1 file changed, 6 insertions(+)

index 335fad8b209a..73dcf03e7e8c 100644
@@ -439,6 +439,12 @@ static int drm_copy_field(char __user *buf, size_t *buf_len, const char *value)
 {
 	size_t len;
 
+	/* don't attempt to copy a NULL pointer */
+	if (WARN_ONCE(!value, "BUG: the value to copy was not set!")) {
+		*buf_len = 0;
+		return 0;
+	}
+
 	/* don't overflow userbuf */
 	len = strlen(value);
 	if (len > *buf_len)

2.35.1

From: Mateusz Kwiatkowski <[email protected]>

[ Upstream commit 30d7565be96b3946c18a1ce3fd538f7946839092 ]

This commit fixes vertical timings of the VEC (composite output) modes to accurately represent the 525-line ("NTSC") and 625-line ("PAL") ITU-R standards.

Previous timings were actually defined as 502 and 601 lines, resulting in non-standard 62.69 Hz and 52 Hz signals being generated, respectively.

---
 drivers/gpu/drm/vc4/vc4_vec.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

index 3a9a302247a2..bcf7880f84a8 100644
@@ -291,7 +291,7 @@ static void vc4_vec_ntsc_j_mode_set(struct vc4_vec *vec)
 static const struct drm_display_mode ntsc_mode = {
 	DRM_MODE("720x480", DRM_MODE_TYPE_DRIVER, 13500,
 		 720, 720 + 14, 720 + 14 + 64, 720 + 14 + 64 + 60, 0,
-		 480, 480 + 3, 480 + 3 + 3, 480 + 3 + 3 + 16, 0,
+		 480, 480 + 7, 480 + 7 + 6, 525, 0,
 		 DRM_MODE_FLAG_INTERLACE)
 };
 

@@ -313,7 +313,7 @@ static void vc4_vec_pal_m_mode_set(struct vc4_vec *vec)
 static const struct drm_display_mode pal_mode = {
 	DRM_MODE("720x576", DRM_MODE_TYPE_DRIVER, 13500,
 		 720, 720 + 20, 720 + 20 + 64, 720 + 20 + 64 + 60, 0,
-		 576, 576 + 2, 576 + 2 + 3, 576 + 2 + 3 + 20, 0,
+		 576, 576 + 4, 576 + 4 + 6, 625, 0,
 		 DRM_MODE_FLAG_INTERLACE)
 };
 

2.35.1

From: Hans de Goede <[email protected]>

[ Upstream commit 2a2565272a3628e45d61625e36ef17af7af4e3de ]

On a MSI S270 with Fedora 37 x86_64 / systemd-251.4 the module does not properly autoload.

This is likely caused by issues with how systemd-udevd handles the single quote char (') which is part of the sys_vendor / chassis_vendor strings on this laptop. As a workaround remove the single quote char + everything behind it from the sys_vendor + chassis_vendor matches. This fixes the module not autoloading.

---
 drivers/platform/x86/msi-laptop.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

index 1ba5f4689df4..42b31c549db0 100644
@@ -609,11 +609,10 @@ static const struct dmi_system_id msi_dmi_table[] __initconst = {
 	{
 		.ident = "MSI S270",
 		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "MICRO-STAR INT'L CO.,LTD"),
+			DMI_MATCH(DMI_SYS_VENDOR, "MICRO-STAR INT"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "MS-1013"),
 			DMI_MATCH(DMI_PRODUCT_VERSION, "0131"),
-			DMI_MATCH(DMI_CHASSIS_VENDOR,
-				  "MICRO-STAR INT'L CO.,LTD")
+			DMI_MATCH(DMI_CHASSIS_VENDOR, "MICRO-STAR INT")
 		},
 		.driver_data = &quirk_old_ec_model,
 		.callback = dmi_check_cb

@@ -646,8 +645,7 @@ static const struct dmi_system_id msi_dmi_table[] __initconst = {
 			DMI_MATCH(DMI_SYS_VENDOR, "NOTEBOOK"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "SAM2000"),
 			DMI_MATCH(DMI_PRODUCT_VERSION, "0131"),
-			DMI_MATCH(DMI_CHASSIS_VENDOR,
-				  "MICRO-STAR INT'L CO.,LTD")
+			DMI_MATCH(DMI_CHASSIS_VENDOR, "MICRO-STAR INT")
 		},
 		.driver_data = &quirk_old_ec_model,
 		.callback = dmi_check_cb

2.35.1

From: hongao <[email protected]>

[ Upstream commit 4bb71fce58f30df3f251118291d6b0187ce531e6 ]

This got lost somewhere along the way, This fixes
audio not working until set_property was called.

---
 drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

index 0894bb98dc51..be3a384cc1cf 100644
@@ -1678,10 +1678,12 @@ amdgpu_connector_add(struct amdgpu_device *adev,
 						   adev->mode_info.dither_property,
 						   AMDGPU_FMT_DITHER_DISABLE);
 
-			if (amdgpu_audio != 0)
+			if (amdgpu_audio != 0) {
 				drm_object_attach_property(&amdgpu_connector->base.base,
 							   adev->mode_info.audio_property,
 							   AMDGPU_AUDIO_AUTO);
+				amdgpu_connector->audio = AMDGPU_AUDIO_AUTO;
+			}
 
 			subpixel_order = SubPixelHorizontalRGB;
 			connector->interlace_allowed = true;

@@ -1786,6 +1788,7 @@ amdgpu_connector_add(struct amdgpu_device *adev,
 				drm_object_attach_property(&amdgpu_connector->base.base,
 							   adev->mode_info.audio_property,
 							   AMDGPU_AUDIO_AUTO);
+				amdgpu_connector->audio = AMDGPU_AUDIO_AUTO;
 			}
 			drm_object_attach_property(&amdgpu_connector->base.base,
 						   adev->mode_info.dither_property,

@@ -1834,6 +1837,7 @@ amdgpu_connector_add(struct amdgpu_device *adev,
 				drm_object_attach_property(&amdgpu_connector->base.base,
 							   adev->mode_info.audio_property,
 							   AMDGPU_AUDIO_AUTO);
+				amdgpu_connector->audio = AMDGPU_AUDIO_AUTO;
 			}
 			drm_object_attach_property(&amdgpu_connector->base.base,
 						   adev->mode_info.dither_property,

@@ -1879,6 +1883,7 @@ amdgpu_connector_add(struct amdgpu_device *adev,
 				drm_object_attach_property(&amdgpu_connector->base.base,
 							   adev->mode_info.audio_property,
 							   AMDGPU_AUDIO_AUTO);
+				amdgpu_connector->audio = AMDGPU_AUDIO_AUTO;
 			}
 			drm_object_attach_property(&amdgpu_connector->base.base,
 						   adev->mode_info.dither_property,

2.35.1

From: Haibo Chen <[email protected]>

[ Upstream commit e7c4ebe2f9cd68588eb24ba4ed122e696e2d5272 ]

Use the general touchscreen method to config the max pressure for touch tsc2046(data sheet suggest 8 bit pressure), otherwise, for ABS_PRESSURE, when config the same max and min value, weston will meet the following issue,

[17:19:39.183] event1  - ADS7846 Touchscreen: is tagged by udev as: Touchscreen
[17:19:39.183] event1  - ADS7846 Touchscreen: kernel bug: device has min == max on ABS_PRESSURE
[17:19:39.183] event1  - ADS7846 Touchscreen: was rejected
[17:19:39.183] event1  - not using input device '/dev/input/event1'

This will then cause the APP weston-touch-calibrator can't list touch devices.

root@imx6ul7d:~# weston-touch-calibrator
could not load cursor 'dnd-move'
could not load cursor 'dnd-copy'
could not load cursor 'dnd-none'
No devices listed.

And accroding to binding Doc, "ti,x-max", "ti,y-max", "ti,pressure-max" belong to the deprecated properties, so remove them. Also for "ti,x-min", "ti,y-min", "ti,x-plate-ohms", the value set in dts equal to the default value in driver, so are redundant, also remove here.

---
 arch/arm/boot/dts/imx7d-sdb.dts | 7 +------
 1 file changed, 1 insertion(+), 6 deletions(-)

index 255e64ba32e2..7cf6557f4afc 100644
@@ -179,12 +179,7 @@
 		interrupt-parent = <&gpio2>;
 		interrupts = <29 0>;
 		pendown-gpio = <&gpio2 29 GPIO_ACTIVE_HIGH>;
-		ti,x-min = /bits/ 16 <0>;
-		ti,x-max = /bits/ 16 <0>;
-		ti,y-min = /bits/ 16 <0>;
-		ti,y-max = /bits/ 16 <0>;
-		ti,pressure-max = /bits/ 16 <0>;
-		ti,x-plate-ohms = /bits/ 16 <400>;
+		touchscreen-max-pressure = <255>;
 		wakeup-source;
 	};
 };

2.35.1

From: Alexander Stein <[email protected]>

[ Upstream commit b11d083c5dcec7c42fe982c854706d404ddd3a5f ]

All 3 properties are required by sram.yaml. Fixes the dtbs_check warning:
sram@900000: '#address-cells' is a required property sram@900000: '#size-cells' is a required property sram@900000: 'ranges' is a required property

---
 arch/arm/boot/dts/imx6q.dtsi | 3 +++
 1 file changed, 3 insertions(+)

index 4747ede61acd..7b335e8050d3 100644
@@ -82,6 +82,9 @@
 		ocram: sram@00900000 {
 			compatible = "mmio-sram";
 			reg = <0x00900000 0x40000>;
+			ranges = <0 0x00900000 0x40000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			clocks = <&clks IMX6QDL_CLK_OCRAM>;
 		};
 

2.35.1

From: Alexander Stein <[email protected]>

[ Upstream commit f5848b95633d598bacf0500e0108dc5961af88c0 ]

All 3 properties are required by sram.yaml. Fixes the dtbs_check warning:
sram@900000: '#address-cells' is a required property sram@900000: '#size-cells' is a required property sram@900000: 'ranges' is a required property

---
 arch/arm/boot/dts/imx6dl.dtsi | 3 +++
 1 file changed, 3 insertions(+)

index 8475e6cc59ac..71e7c87c7497 100644
@@ -63,6 +63,9 @@
 		ocram: sram@00900000 {
 			compatible = "mmio-sram";
 			reg = <0x00900000 0x20000>;
+			ranges = <0 0x00900000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			clocks = <&clks IMX6QDL_CLK_OCRAM>;
 		};
 

2.35.1

From: Alexander Stein <[email protected]>

[ Upstream commit 088fe5237435ee2f7ed4450519b2ef58b94c832f ]

All 3 properties are required by sram.yaml. Fixes the dtbs_check warning:
sram@940000: '#address-cells' is a required property sram@940000: '#size-cells' is a required property sram@940000: 'ranges' is a required property

---
 arch/arm/boot/dts/imx6qp.dtsi | 6 ++++++
 1 file changed, 6 insertions(+)

index 299d863690c5..6cf0f9e18b70 100644
@@ -47,12 +47,18 @@
 		ocram2: sram@00940000 {
 			compatible = "mmio-sram";
 			reg = <0x00940000 0x20000>;
+			ranges = <0 0x00940000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			clocks = <&clks IMX6QDL_CLK_OCRAM>;
 		};
 
 		ocram3: sram@00960000 {
 			compatible = "mmio-sram";
 			reg = <0x00960000 0x20000>;
+			ranges = <0 0x00960000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			clocks = <&clks IMX6QDL_CLK_OCRAM>;
 		};
 

2.35.1

From: Alexander Stein <[email protected]>

[ Upstream commit 60c9213a1d9941a8b33db570796c3f9be8984974 ]

All 3 properties are required by sram.yaml. Fixes the dtbs_check warning:
sram@900000: '#address-cells' is a required property sram@900000: '#size-cells' is a required property sram@900000: 'ranges' is a required property

---
 arch/arm/boot/dts/imx6sl.dtsi | 3 +++
 1 file changed, 3 insertions(+)

index bd9308b222ba..c8613ccd0944 100644
@@ -112,6 +112,9 @@
 		ocram: sram@00900000 {
 			compatible = "mmio-sram";
 			reg = <0x00900000 0x20000>;
+			ranges = <0 0x00900000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			clocks = <&clks IMX6SL_CLK_OCRAM>;
 		};
 

2.35.1

From: Zheyu Ma <[email protected]>

[ Upstream commit 2b064d91440b33fba5b452f2d1b31f13ae911d71 ]

When the driver calls cx88_risc_buffer() to prepare the buffer, the function call may fail, resulting in a empty buffer and null-ptr-deref later in buffer_queue().

The following log can reveal it:

[   41.822762] general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN PTI
[   41.824488] KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
[   41.828027] RIP: 0010:buffer_queue+0xc2/0x500
[   41.836311] Call Trace:
[   41.836945]  __enqueue_in_driver+0x141/0x360
[   41.837262]  vb2_start_streaming+0x62/0x4a0
[   41.838216]  vb2_core_streamon+0x1da/0x2c0
[   41.838516]  __vb2_init_fileio+0x981/0xbc0
[   41.839141]  __vb2_perform_fileio+0xbf9/0x1120
[   41.840072]  vb2_fop_read+0x20e/0x400
[   41.840346]  v4l2_read+0x215/0x290
[   41.840603]  vfs_read+0x162/0x4c0

Fix this by checking the return value of cx88_risc_buffer()

[hverkuil: fix coding style issues]

---
 drivers/media/pci/cx88/cx88-vbi.c   |  9 +++---
 drivers/media/pci/cx88/cx88-video.c | 43 +++++++++++++++--------------
 2 files changed, 26 insertions(+), 26 deletions(-)

index c637679b01b2..2649f87c070f 100644
@@ -144,11 +144,10 @@ static int buffer_prepare(struct vb2_buffer *vb)
 		return -EINVAL;
 	vb2_set_plane_payload(vb, 0, size);
 
-	cx88_risc_buffer(dev->pci, &buf->risc, sgt->sgl,
-			 0, VBI_LINE_LENGTH * lines,
-			 VBI_LINE_LENGTH, 0,
-			 lines);
-	return 0;
+	return cx88_risc_buffer(dev->pci, &buf->risc, sgt->sgl,
+				0, VBI_LINE_LENGTH * lines,
+				VBI_LINE_LENGTH, 0,
+				lines);
 }
 
 static void buffer_finish(struct vb2_buffer *vb)

2.35.1

From: Letu Ren <[email protected]>

[ Upstream commit 7eff437b5ee1309b34667844361c6bbb5c97df05 ]

The original code will "goto out_disable_device" and call pci_disable_device() if pci_enable_device() fails. The kernel will generate a warning message like "3w-9xxx 0000:00:05.0: disabling already-disabled device".

We shouldn't disable a device that failed to be enabled. A simple return is fine.

---
 drivers/scsi/3w-9xxx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index dd342207095a..0baeed1793aa 100644
@@ -2013,7 +2013,7 @@ static int twa_probe(struct pci_dev *pdev, const struct pci_device_id *dev_id)
 	retval = pci_enable_device(pdev);
 	if (retval) {
 		TW_PRINTK(host, TW_DRIVER, 0x34, "Failed to enable pci device");
-		goto out_disable_device;
+		return -ENODEV;
 	}
 
 	pci_set_master(pdev);

2.35.1

From: Shigeru Yoshida <[email protected]>

[ Upstream commit 1de7c3cf48fc41cd95adb12bd1ea9033a917798a ]

syzbot reported hung task [1]. The following program is a simplified version of the reproducer:

int main(void)

{
	int sv[2], fd;

	if (socketpair(AF_UNIX, SOCK_STREAM, 0, sv) < 0)
		return 1;
	if ((fd = open("/dev/nbd0", 0)) < 0)
		return 1;
	if (ioctl(fd, NBD_SET_SIZE_BLOCKS, 0x81) < 0)
		return 1;
	if (ioctl(fd, NBD_SET_SOCK, sv[0]) < 0)
		return 1;
	if (ioctl(fd, NBD_DO_IT) < 0)
		return 1;
	return 0;
}

When signal interrupt nbd_start_device_ioctl() waiting the condition atomic_read(&config->recv_threads) == 0, the task can hung because it waits the completion of the inflight IOs.

This patch fixes the issue by clearing queue, not just shutdown, when signal interrupt nbd_start_device_ioctl().

---
 drivers/block/nbd.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

index 338d02a67afb..f01b8860ba14 100644
@@ -1258,10 +1258,12 @@ static int nbd_start_device_ioctl(struct nbd_device *nbd, struct block_device *b
 	mutex_unlock(&nbd->config_lock);
 	ret = wait_event_interruptible(config->recv_wq,
 					 atomic_read(&config->recv_threads) == 0);
-	if (ret)
+	if (ret) {
 		sock_shutdown(nbd);
-	flush_workqueue(nbd->recv_workq);
+		nbd_clear_que(nbd);
+	}
 
+	flush_workqueue(nbd->recv_workq);
 	mutex_lock(&nbd->config_lock);
 	bd_set_size(bdev, 0);
 	/* user requested, ignore socket errors */

2.35.1

From: Hyunwoo Kim <[email protected]>

[ Upstream commit cacdb14b1c8d3804a3a7d31773bc7569837b71a4 ]

roccat_report_event() is responsible for registering roccat-related reports in struct roccat_device.

int roccat_report_event(int minor, u8 const *data)

{
	struct roccat_device *device;
	struct roccat_reader *reader;
	struct roccat_report *report;
	uint8_t *new_value;

	device = devices[minor];

	new_value = kmemdup(data, device->report_size, GFP_ATOMIC);
	if (!new_value)
		return -ENOMEM;

	report = &device->cbuf[device->cbuf_end];

	/* passing NULL is safe */
	kfree(report->value);
	...

The registered report is stored in the struct roccat_device member "struct roccat_report cbuf[ROCCAT_CBUF_SIZE];".
If more reports are received than the "ROCCAT_CBUF_SIZE" value, kfree() the saved report from cbuf[0] and allocates a new reprot. Since there is no lock when this kfree() is performed, kfree() can be performed even while reading the saved report.

static ssize_t roccat_read(struct file *file, char __user *buffer,
size_t count, loff_t *ppos)

{
	struct roccat_reader *reader = file->private_data;
	struct roccat_device *device = reader->device;
	struct roccat_report *report;
	ssize_t retval = 0, len;
	DECLARE_WAITQUEUE(wait, current);

	mutex_lock(&device->cbuf_lock);

	...

	report = &device->cbuf[reader->cbuf_start];
	/*
	 * If report is larger than requested amount of data, rest of report
	 * is lost!
	 */
	len = device->report_size > count ? count : device->report_size;

	if (copy_to_user(buffer, report->value, len)) {
		retval = -EFAULT;
		goto exit_unlock;
	}
	...

The roccat_read() function receives the device->cbuf report and delivers it to the user through copy_to_user().
If the N+ROCCAT_CBUF_SIZE th report is received while copying of the Nth report->value is in progress, the pointer that copy_to_user() is working on is kfree()ed and UAF read may occur. (race condition)

Since the device node of this driver does not set separate permissions, this is not a security vulnerability, but because it is used for requesting screen display of profile or dpi settings,
a user using the roccat device can apply udev to this device node or There is a possibility to use it by giving.

---
 drivers/hid/hid-roccat.c | 4 ++++
 1 file changed, 4 insertions(+)

index fb77dec720a4..edfaf2cd0f26 100644
@@ -260,6 +260,8 @@ int roccat_report_event(int minor, u8 const *data)
 	if (!new_value)
 		return -ENOMEM;
 
+	mutex_lock(&device->cbuf_lock);
+
 	report = &device->cbuf[device->cbuf_end];
 
 	/* passing NULL is safe */

@@ -279,6 +281,8 @@ int roccat_report_event(int minor, u8 const *data)
 			reader->cbuf_start = (reader->cbuf_start + 1) % ROCCAT_CBUF_SIZE;
 	}
 
+	mutex_unlock(&device->cbuf_lock);
+
 	wake_up_interruptible(&device->wait);
 	return 0;
 }

2.35.1

From: Logan Gunthorpe <[email protected]>

[ Upstream commit 5e2cf333b7bd5d3e62595a44d598a254c697cd74 ]

A complicated deadlock exists when using the journal and an elevated group_thrtead_cnt. It was found with loop devices, but its not clear whether it can be seen with real disks. The deadlock can occur simply by writing data with an fio script.

When the deadlock occurs, multiple threads will hang in different ways:

1) The group threads will hang in the blk-wbt code with bios waiting to

    be submitted to the block layer:

        io_schedule+0x70/0xb0
        rq_qos_wait+0x153/0x210
        wbt_wait+0x115/0x1b0
        io_schedule+0x70/0xb0
        rq_qos_wait+0x153/0x210
        wbt_wait+0x115/0x1b0
        __rq_qos_throttle+0x38/0x60
        blk_mq_submit_bio+0x589/0xcd0
        wbt_wait+0x115/0x1b0
        __rq_qos_throttle+0x38/0x60
        blk_mq_submit_bio+0x589/0xcd0
        __submit_bio+0xe6/0x100
        submit_bio_noacct_nocheck+0x42e/0x470
        submit_bio_noacct+0x4c2/0xbb0
        ops_run_io+0x46b/0x1a30
        handle_stripe+0xcd3/0x36b0
        handle_active_stripes.constprop.0+0x6f6/0xa60
        raid5_do_work+0x177/0x330

    Or:
        io_schedule+0x70/0xb0
        rq_qos_wait+0x153/0x210
        wbt_wait+0x115/0x1b0
        __rq_qos_throttle+0x38/0x60
        blk_mq_submit_bio+0x589/0xcd0
        __submit_bio+0xe6/0x100
        submit_bio_noacct_nocheck+0x42e/0x470
        submit_bio_noacct+0x4c2/0xbb0
        flush_deferred_bios+0x136/0x170
        raid5_do_work+0x262/0x330

2) The r5l_reclaim thread will hang in the same way, submitting a

    bio to the block layer:

        io_schedule+0x70/0xb0
        rq_qos_wait+0x153/0x210
        wbt_wait+0x115/0x1b0
        __rq_qos_throttle+0x38/0x60
        blk_mq_submit_bio+0x589/0xcd0
        __submit_bio+0xe6/0x100
        submit_bio_noacct_nocheck+0x42e/0x470
        submit_bio_noacct+0x4c2/0xbb0
        submit_bio+0x3f/0xf0
        md_super_write+0x12f/0x1b0
        md_update_sb.part.0+0x7c6/0xff0
        md_update_sb+0x30/0x60
        r5l_do_reclaim+0x4f9/0x5e0
        r5l_reclaim_thread+0x69/0x30b

    However, before hanging, the MD_SB_CHANGE_PENDING flag will be
    set for sb_flags in r5l_write_super_and_discard_space(). This
    flag will never be cleared because the submit_bio() call never
    returns.

3) Due to the MD_SB_CHANGE_PENDING flag being set, handle_stripe() will do no processing on any pending stripes and re-set STRIPE_HANDLE. This will cause the raid5d thread to enter an infinite loop, constantly trying to handle the same stripes stuck in the queue.

The raid5d thread has a blk_plug that holds a number of bios that are also stuck waiting seeing the thread is in a loop that never schedules. These bios have been accounted for by blk-wbt thus preventing the other threads above from continuing when they try to submit bios. --Deadlock.

To fix this, add the same wait_event() that is used in raid5_do_work() to raid5d() such that if MD_SB_CHANGE_PENDING is set, the thread will schedule and wait until the flag is cleared. The schedule action will flush the plug which will allow the r5l_reclaim thread to continue, thus preventing the deadlock.

However, md_check_recovery() calls can also clear MD_SB_CHANGE_PENDING from the same thread and can thus deadlock if the thread is put to sleep. So avoid waiting if md_check_recovery() is being called in the loop.

It's not clear when the deadlock was introduced, but the similar wait_event() call in raid5_do_work() was added in 2017 by this commit:

16d997b78b15 ("md/raid5: simplfy delaying of writes while metadata
is updated.")

---
 drivers/md/raid5.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

index 78b48dca3fda..dc053a43a3dc 100644
@@ -44,6 +44,7 @@
  */
 
 #include <linux/blkdev.h>
+#include <linux/delay.h>
 #include <linux/kthread.h>
 #include <linux/raid/pq.h>
 #include <linux/async_tx.h>

@@ -6308,7 +6309,18 @@ static void raid5d(struct md_thread *thread)
 			spin_unlock_irq(&conf->device_lock);
 			md_check_recovery(mddev);
 			spin_lock_irq(&conf->device_lock);
+
+			/*
+			 * Waiting on MD_SB_CHANGE_PENDING below may deadlock
+			 * seeing md_check_recovery() is needed to clear
+			 * the flag when using mdmon.
+			 */
+			continue;
 		}
+
+		wait_event_lock_irq(mddev->sb_wait,
+			!test_bit(MD_SB_CHANGE_PENDING, &mddev->sb_flags),
+			conf->device_lock);
 	}
 	pr_debug("%d stripes handled\n", handled);
 

2.35.1

From: Jianglei Nie <[email protected]>

[ Upstream commit 7e271f42a5cc3768cd2622b929ba66859ae21f97 ]

xhci_alloc_stream_info() allocates stream context array for stream_info ->stream_ctx_array with xhci_alloc_stream_ctx(). When some error occurs, stream_info->stream_ctx_array is not released, which will lead to a memory leak.

We can fix it by releasing the stream_info->stream_ctx_array with xhci_free_stream_ctx() on the error path to avoid the potential memory leak.

---
 drivers/usb/host/xhci-mem.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

index e930e2777c87..ae724460c8f2 100644
@@ -657,7 +657,7 @@ struct xhci_stream_info *xhci_alloc_stream_info(struct xhci_hcd *xhci,
 			num_stream_ctxs, &stream_info->ctx_array_dma,
 			mem_flags);
 	if (!stream_info->stream_ctx_array)
-		goto cleanup_ctx;
+		goto cleanup_ring_array;
 	memset(stream_info->stream_ctx_array, 0,
 			sizeof(struct xhci_stream_ctx)*num_stream_ctxs);
 

@@ -718,6 +718,11 @@ struct xhci_stream_info *xhci_alloc_stream_info(struct xhci_hcd *xhci,
 	}
 	xhci_free_command(xhci, stream_info->free_streams_command);
 cleanup_ctx:
+	xhci_free_stream_ctx(xhci,
+		stream_info->num_stream_ctxs,
+		stream_info->stream_ctx_array,
+		stream_info->ctx_array_dma);
+cleanup_ring_array:
 	kfree(stream_info->stream_rings);
 cleanup_info:
 	kfree(stream_info);

2.35.1

From: Robin Guo <[email protected]>

[ Upstream commit eea4c860c3b366369eff0489d94ee4f0571d467d ]

The usb function device call musb_gadget_queue() adds the passed request to musb_ep::req_list,If the (request->length > musb_ep->packet_sz) and (is_buffer_mapped(req) return false),the rxstate() will copy all data in fifo to request->buf which may cause request->buf out of bounds.

Fix it by add the length check :
fifocnt = min_t(unsigned, request->length - request->actual, fifocnt);

---
 drivers/usb/musb/musb_gadget.c | 3 +++
 1 file changed, 3 insertions(+)

index 319c5a1b4a6a..8fd68f45a8df 100644
@@ -785,6 +785,9 @@ static void rxstate(struct musb *musb, struct musb_request *req)
 			musb_writew(epio, MUSB_RXCSR, csr);
 
 buffer_aint_mapped:
+			fifo_count = min_t(unsigned int,
+					request->length - request->actual,
+					(unsigned int)fifo_count);
 			musb_read_fifo(musb_ep->hw_ep, fifo_count, (u8 *)
 					(request->buf + request->actual));
 			request->actual += fifo_count;

2.35.1

From: sunghwan jung <[email protected]>

[ Upstream commit ad5dbfc123e6ffbbde194e2a4603323e09f741ee ]

This reverts commit 86d92f5465958752481269348d474414dccb1552, which fix the timeout issue for "Samsung Fit Flash".

But the commit affects not only "Samsung Fit Flash" but also other usb storages that use the same controller and causes severe performance regression.

 # hdparm -t /dev/sda (without the quirk)
 Timing buffered disk reads: 622 MB in  3.01 seconds = 206.66 MB/sec

 # hdparm -t /dev/sda (with the quirk)
 Timing buffered disk reads: 220 MB in  3.00 seconds =  73.32 MB/sec

The commit author mentioned that "Issue was reproduced after device has bad block", so this quirk should be applied when we have the timeout issue with a device that has bad blocks.

We revert the commit so that we apply this quirk by adding kernel paramters using a bootloader or other ways when we really need it, without the performance regression with devices that don't have the issue.

---
 drivers/usb/storage/unusual_devs.h | 6 ------
 1 file changed, 6 deletions(-)

index 8c186ab5b5f7..8b38dd7d89b7 100644
@@ -1294,12 +1294,6 @@ UNUSUAL_DEV( 0x090a, 0x1200, 0x0000, 0x9999,
 		USB_SC_RBC, USB_PR_BULK, NULL,
 		0 ),
 
-UNUSUAL_DEV(0x090c, 0x1000, 0x1100, 0x1100,
-		"Samsung",
-		"Flash Drive FIT",
-		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
-		US_FL_MAX_SECTORS_64),
-
 /* aeb */
 UNUSUAL_DEV( 0x090c, 0x1132, 0x0000, 0xffff,
 		"Feiya",

2.35.1

From: Dongliang Mu <[email protected]>

[ Upstream commit bce2b0539933e485d22d6f6f076c0fcd6f185c4c ]

In idmouse_create_image, if any ftip_command fails, it will go to the reset label. However, this leads to the data in bulk_in_buffer[HEADER..IMGSIZE] uninitialized. And the check for valid image incurs an uninitialized dereference.

Fix this by moving the check before reset label since this check only be valid if the data after bulk_in_buffer[HEADER] has concrete data.

Note that this is found by KMSAN, so only kernel compilation is tested.

---
 drivers/usb/misc/idmouse.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

index 01ef2551be46..974b8d0621bd 100644
@@ -182,10 +182,6 @@ static int idmouse_create_image(struct usb_idmouse *dev)
 		bytes_read += bulk_read;
 	}
 
-	/* reset the device */
-reset:
-	ftip_command(dev, FTIP_RELEASE, 0, 0);
-
 	/* check for valid image */
 	/* right border should be black (0x00) */
 	for (bytes_read = sizeof(HEADER)-1 + WIDTH-1; bytes_read < IMGSIZE; bytes_read += WIDTH)

@@ -197,6 +193,10 @@ static int idmouse_create_image(struct usb_idmouse *dev)
 		if (dev->bulk_in_buffer[bytes_read] != 0xFF)
 			return -EAGAIN;
 
+	/* reset the device */
+reset:
+	ftip_command(dev, FTIP_RELEASE, 0, 0);
+
 	/* should be IMGSIZE == 65040 */
 	dev_dbg(&dev->interface->dev, "read %d bytes fingerprint data\n",
 		bytes_read);

2.35.1

From: Adrian Hunter <[email protected]>

commit 5a3d47071f0ced0431ef82a5fb6bd077ed9493db upstream.

uClibc segfaulted because NULL was passed as the format to fprintf().

That happened because one of the format strings was missing and intel_pt_print_info() didn't check that before calling fprintf().

Add the missing format string, and check format is not NULL before calling fprintf().

---
 tools/perf/util/intel-pt.c |    9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

@@ -2411,6 +2411,7 @@ static const char * const intel_pt_info_
 	[INTEL_PT_SNAPSHOT_MODE]	= "  Snapshot mode       %"PRId64"\n",
 	[INTEL_PT_PER_CPU_MMAPS]	= "  Per-cpu maps        %"PRId64"\n",
 	[INTEL_PT_MTC_BIT]		= "  MTC bit             %#"PRIx64"\n",
+	[INTEL_PT_MTC_FREQ_BITS]	= "  MTC freq bits       %#"PRIx64"\n",
 	[INTEL_PT_TSC_CTC_N]		= "  TSC:CTC numerator   %"PRIu64"\n",
 	[INTEL_PT_TSC_CTC_D]		= "  TSC:CTC denominator %"PRIu64"\n",
 	[INTEL_PT_CYC_BIT]		= "  CYC bit             %#"PRIx64"\n",

@@ -2425,8 +2426,12 @@ static void intel_pt_print_info(u64 *arr
 	if (!dump_trace)
 		return;
 
-	for (i = start; i <= finish; i++)
-		fprintf(stdout, intel_pt_info_fmts[i], arr[i]);
+	for (i = start; i <= finish; i++) {
+		const char *fmt = intel_pt_info_fmts[i];
+
+		if (fmt)
+			fprintf(stdout, fmt, arr[i]);
+	}
 }
 
 static void intel_pt_print_info_str(const char *name, const char *str)

From: Alexander Aring <[email protected]>

commit 30393181fdbc1608cc683b4ee99dcce05ffcc8c7 upstream.

This patch adds handling to return -EINVAL for an unknown addr type. The current behaviour is to return 0 as successful but the size of an unknown addr type is not defined and should return an error like -EINVAL.

---
 include/net/ieee802154_netdev.h |   12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

@@ -193,21 +193,27 @@ static inline int
 ieee802154_sockaddr_check_size(struct sockaddr_ieee802154 *daddr, int len)
 {
 	struct ieee802154_addr_sa *sa;
+	int ret = 0;
 
 	sa = &daddr->addr;
 	if (len < IEEE802154_MIN_NAMELEN)
 		return -EINVAL;
 	switch (sa->addr_type) {
+	case IEEE802154_ADDR_NONE:
+		break;
 	case IEEE802154_ADDR_SHORT:
 		if (len < IEEE802154_NAMELEN_SHORT)
-			return -EINVAL;
+			ret = -EINVAL;
 		break;
 	case IEEE802154_ADDR_LONG:
 		if (len < IEEE802154_NAMELEN_LONG)
-			return -EINVAL;
+			ret = -EINVAL;
+		break;
+	default:
+		ret = -EINVAL;
 		break;
 	}
-	return 0;
+	return ret;
 }
 
 static inline void ieee802154_addr_from_sa(struct ieee802154_addr *a,

From: Tetsuo Handa <[email protected]>

[ Upstream commit b12e924a2f5b960373459c8f8a514f887adf5cac ]

syzbot is hitting skb_assert_len() warning at __dev_queue_xmit() [1], for PF_IEEE802154 socket's zero-sized raw_sendmsg() request is hitting __dev_queue_xmit() with skb->len == 0.

Since PF_IEEE802154 socket's zero-sized raw_sendmsg() request was able to return 0, don't call __dev_queue_xmit() if packet length is 0.

  ----------
  #include <sys/socket.h>
  #include <netinet/in.h>

  int main(int argc, char *argv[])
  {
    struct sockaddr_in addr = { .sin_family = AF_INET, .sin_addr.s_addr = htonl(INADDR_LOOPBACK) };
    struct iovec iov = { };
    struct msghdr hdr = { .msg_name = &addr, .msg_namelen = sizeof(addr), .msg_iov = &iov, .msg_iovlen = 1 };
    sendmsg(socket(PF_IEEE802154, SOCK_RAW, 0), &hdr, 0);
    return 0;
  }
  ----------

Note that this might be a sign that commit fd1894224407c484 ("bpf: Don't redirect packets with invalid pkt_len") should be reverted, for skb->len == 0 was acceptable for at least PF_IEEE802154 socket.

---
 net/ieee802154/socket.c | 4 ++++
 1 file changed, 4 insertions(+)

index 16bf114118c3..a8929675b5ab 100644
@@ -284,6 +284,10 @@ static int raw_sendmsg(struct sock *sk, struct msghdr *msg, size_t size)
 		err = -EMSGSIZE;
 		goto out_dev;
 	}
+	if (!size) {
+		err = 0;
+		goto out_dev;
+	}
 
 	hlen = LL_RESERVED_SPACE(dev);
 	tlen = dev->needed_tailroom;

2.35.1

From: Jerry Lee 李修賢 <[email protected]>

commit df3cb754d13d2cd5490db9b8d536311f8413a92e upstream.

When expanding a file system from (16TiB-2MiB) to 18TiB, the operation exits early which leads to result inconsistency between resize2fs and Ext4 kernel driver.

=== before ===
○ → resize2fs /dev/mapper/thin
resize2fs 1.45.5 (07-Jan-2020)
Filesystem at /dev/mapper/thin is mounted on /mnt/test; on-line resizing required old_desc_blocks = 2048, new_desc_blocks = 2304
The filesystem on /dev/mapper/thin is now 4831837696 (4k) blocks long.

[  865.186308] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[  912.091502] dm-4: detected capacity change from 34359738368 to 38654705664
[  970.030550] dm-5: detected capacity change from 34359734272 to 38654701568
[ 1000.012751] EXT4-fs (dm-5): resizing filesystem from 4294966784 to 4831837696 blocks
[ 1000.012878] EXT4-fs (dm-5): resized filesystem to 4294967296

=== after ===

[  129.104898] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[  143.773630] dm-4: detected capacity change from 34359738368 to 38654705664
[  198.203246] dm-5: detected capacity change from 34359734272 to 38654701568
[  207.918603] EXT4-fs (dm-5): resizing filesystem from 4294966784 to 4831837696 blocks
[  207.918754] EXT4-fs (dm-5): resizing filesystem from 4294967296 to 4831837696 blocks
[  207.918758] EXT4-fs (dm-5): Converting file system to meta_bg
[  207.918790] EXT4-fs (dm-5): resizing filesystem from 4294967296 to 4831837696 blocks
[  221.454050] EXT4-fs (dm-5): resized to 4658298880 blocks
[  227.634613] EXT4-fs (dm-5): resized filesystem to 4831837696

---
 fs/ext4/resize.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -2062,7 +2062,7 @@ retry:
 			goto out;
 	}
 
-	if (ext4_blocks_count(es) == n_blocks_count)
+	if (ext4_blocks_count(es) == n_blocks_count && n_blocks_count_retry == 0)
 		goto out;
 
 	err = ext4_alloc_flex_bg_array(sb, n_group + 1);

From: Saurabh Sengar <[email protected]>

commit 1727fd5015d8f93474148f94e34cda5aa6ad4a43 upstream.

Current code produces a warning as shown below when total characters in the constituent block device names plus the slashes exceeds 200. snprintf() returns the number of characters generated from the given input, which could cause the expression “200 – len” to wrap around to a large positive number. Fix this by using scnprintf() instead, which returns the actual number of characters written into the buffer.

[ 1513.267938] ------------[ cut here ]------------
[ 1513.267943] WARNING: CPU: 15 PID: 37247 at <snip>/lib/vsprintf.c:2509 vsnprintf+0x2c8/0x510
[ 1513.267944] Modules linked in:  <snip>
[ 1513.267969] CPU: 15 PID: 37247 Comm: mdadm Not tainted 5.4.0-1085-azure #90~18.04.1-Ubuntu
[ 1513.267969] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.1 05/09/2022
[ 1513.267971] RIP: 0010:vsnprintf+0x2c8/0x510
<-snip->
[ 1513.267982] Call Trace:
[ 1513.267986]  snprintf+0x45/0x70
[ 1513.267990]  ? disk_name+0x71/0xa0
[ 1513.267993]  dump_zones+0x114/0x240 [raid0]
[ 1513.267996]  ? _cond_resched+0x19/0x40
[ 1513.267998]  raid0_run+0x19e/0x270 [raid0]
[ 1513.268000]  md_run+0x5e0/0xc50
[ 1513.268003]  ? security_capable+0x3f/0x60
[ 1513.268005]  do_md_run+0x19/0x110
[ 1513.268006]  md_ioctl+0x195e/0x1f90
[ 1513.268007]  blkdev_ioctl+0x91f/0x9f0
[ 1513.268010]  block_ioctl+0x3d/0x50
[ 1513.268012]  do_vfs_ioctl+0xa9/0x640
[ 1513.268014]  ? __fput+0x162/0x260
[ 1513.268016]  ksys_ioctl+0x75/0x80
[ 1513.268017]  __x64_sys_ioctl+0x1a/0x20
[ 1513.268019]  do_syscall_64+0x5e/0x200
[ 1513.268021]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

---
 drivers/md/raid0.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

@@ -70,8 +70,8 @@ static void dump_zones(struct mddev *mdd
 		int len = 0;
 
 		for (k = 0; k < conf->strip_zone[j].nb_dev; k++)
-			len += snprintf(line+len, 200-len, "%s%s", k?"/":"",
-					bdevname(conf->devlist[j*raid_disks
+			len += scnprintf(line+len, 200-len, "%s%s", k?"/":"",
+					 bdevname(conf->devlist[j*raid_disks
 							       + k]->bdev, b));
 		pr_debug("md: zone%d=[%s]\n", j, line);
 

From: Ard Biesheuvel <[email protected]>

commit d80ca810f096ff66f451e7a3ed2f0cd9ef1ff519 upstream.

Currently, the non-x86 stub code calls get_memory_map() redundantly, given that the data it returns is never used anywhere. So drop the call.

---
 drivers/firmware/efi/libstub/fdt.c |    8 --------
 1 file changed, 8 deletions(-)

@@ -301,14 +301,6 @@ efi_status_t allocate_new_fdt_and_exit_b
 		goto fail;
 	}
 
-	/*
-	 * Now that we have done our final memory allocation (and free)
-	 * we can get the memory map key needed for exit_boot_services().
-	 */
-	status = efi_get_memory_map(sys_table, &map);
-	if (status != EFI_SUCCESS)
-		goto fail_free_new_fdt;
-
 	status = update_fdt(sys_table, (void *)fdt_addr, fdt_size,
 			    (void *)*new_fdt_addr, MAX_FDT_SIZE, cmdline_ptr,
 			    initrd_addr, initrd_size);

From: Eric Dumazet <[email protected]>

commit 8f905c0e7354ef261360fb7535ea079b1082c105 upstream.

syzbot reported various issues around early demux, one being included in this changelog [1]

sk->sk_rx_dst is using RCU protection without clearly documenting it.

And following sequences in tcp_v4_do_rcv()/tcp_v6_do_rcv() are not following standard RCU rules.

[a] dst_release(dst);
[b] sk->sk_rx_dst = NULL;

They look wrong because a delete operation of RCU protected pointer is supposed to clear the pointer before
the call_rcu()/synchronize_rcu() guarding actual memory freeing.

In some cases indeed, dst could be freed before [b] is done.

We could cheat by clearing sk_rx_dst before calling dst_release(), but this seems the right time to stick to standard RCU annotations and debugging facilities.

[1]

BUG: KASAN: use-after-free in dst_check include/net/dst.h:470 [inline]
BUG: KASAN: use-after-free in tcp_v4_early_demux+0x95b/0x960 net/ipv4/tcp_ipv4.c:1792
Read of size 2 at addr ffff88807f1cb73a by task syz-executor.5/9204

CPU: 0 PID: 9204 Comm: syz-executor.5 Not tainted 5.16.0-rc5-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 <TASK>
 __dump_stack lib/dump_stack.c:88 [inline]
 dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
 print_address_description.constprop.0.cold+0x8d/0x320 mm/kasan/report.c:247
 __kasan_report mm/kasan/report.c:433 [inline]
 kasan_report.cold+0x83/0xdf mm/kasan/report.c:450
 dst_check include/net/dst.h:470 [inline]
 tcp_v4_early_demux+0x95b/0x960 net/ipv4/tcp_ipv4.c:1792
 ip_rcv_finish_core.constprop.0+0x15de/0x1e80 net/ipv4/ip_input.c:340
 ip_list_rcv_finish.constprop.0+0x1b2/0x6e0 net/ipv4/ip_input.c:583
 ip_sublist_rcv net/ipv4/ip_input.c:609 [inline]
 ip_list_rcv+0x34e/0x490 net/ipv4/ip_input.c:644
 __netif_receive_skb_list_ptype net/core/dev.c:5508 [inline]
 __netif_receive_skb_list_core+0x549/0x8e0 net/core/dev.c:5556
 __netif_receive_skb_list net/core/dev.c:5608 [inline]
 netif_receive_skb_list_internal+0x75e/0xd80 net/core/dev.c:5699
 gro_normal_list net/core/dev.c:5853 [inline]
 gro_normal_list net/core/dev.c:5849 [inline]
 napi_complete_done+0x1f1/0x880 net/core/dev.c:6590
 virtqueue_napi_complete drivers/net/virtio_net.c:339 [inline]
 virtnet_poll+0xca2/0x11b0 drivers/net/virtio_net.c:1557
 __napi_poll+0xaf/0x440 net/core/dev.c:7023
 napi_poll net/core/dev.c:7090 [inline]
 net_rx_action+0x801/0xb40 net/core/dev.c:7177
 __do_softirq+0x29b/0x9c2 kernel/softirq.c:558
 invoke_softirq kernel/softirq.c:432 [inline]
 __irq_exit_rcu+0x123/0x180 kernel/softirq.c:637
 irq_exit_rcu+0x5/0x20 kernel/softirq.c:649
 common_interrupt+0x52/0xc0 arch/x86/kernel/irq.c:240
 asm_common_interrupt+0x1e/0x40 arch/x86/include/asm/idtentry.h:629
RIP: 0033:0x7f5e972bfd57
Code: 39 d1 73 14 0f 1f 80 00 00 00 00 48 8b 50 f8 48 83 e8 08 48 39 ca 77 f3 48 39 c3 73 3e 48 89 13 48 8b 50 f8 48 89 38 49 8b 0e <48> 8b 3e 48 83 c3 08 48 83 c6 08 eb bc 48 39 d1 72 9e 48 39 d0 73
RSP: 002b:00007fff8a413210 EFLAGS: 00000283
RAX: 00007f5e97108990 RBX: 00007f5e97108338 RCX: ffffffff81d3aa45
RDX: ffffffff81d3aa45 RSI: 00007f5e97108340 RDI: ffffffff81d3aa45
RBP: 00007f5e97107eb8 R08: 00007f5e97108d88 R09: 0000000093c2e8d9
R10: 0000000000000000 R11: 0000000000000000 R12: 00007f5e97107eb0
R13: 00007f5e97108338 R14: 00007f5e97107ea8 R15: 0000000000000019
 </TASK>

Allocated by task 13:
 kasan_save_stack+0x1e/0x50 mm/kasan/common.c:38
 kasan_set_track mm/kasan/common.c:46 [inline]
 set_alloc_info mm/kasan/common.c:434 [inline]
 __kasan_slab_alloc+0x90/0xc0 mm/kasan/common.c:467
 kasan_slab_alloc include/linux/kasan.h:259 [inline]
 slab_post_alloc_hook mm/slab.h:519 [inline]
 slab_alloc_node mm/slub.c:3234 [inline]
 slab_alloc mm/slub.c:3242 [inline]
 kmem_cache_alloc+0x202/0x3a0 mm/slub.c:3247
 dst_alloc+0x146/0x1f0 net/core/dst.c:92
 rt_dst_alloc+0x73/0x430 net/ipv4/route.c:1613
 ip_route_input_slow+0x1817/0x3a20 net/ipv4/route.c:2340
 ip_route_input_rcu net/ipv4/route.c:2470 [inline]
 ip_route_input_noref+0x116/0x2a0 net/ipv4/route.c:2415
 ip_rcv_finish_core.constprop.0+0x288/0x1e80 net/ipv4/ip_input.c:354
 ip_list_rcv_finish.constprop.0+0x1b2/0x6e0 net/ipv4/ip_input.c:583
 ip_sublist_rcv net/ipv4/ip_input.c:609 [inline]
 ip_list_rcv+0x34e/0x490 net/ipv4/ip_input.c:644
 __netif_receive_skb_list_ptype net/core/dev.c:5508 [inline]
 __netif_receive_skb_list_core+0x549/0x8e0 net/core/dev.c:5556
 __netif_receive_skb_list net/core/dev.c:5608 [inline]
 netif_receive_skb_list_internal+0x75e/0xd80 net/core/dev.c:5699
 gro_normal_list net/core/dev.c:5853 [inline]
 gro_normal_list net/core/dev.c:5849 [inline]
 napi_complete_done+0x1f1/0x880 net/core/dev.c:6590
 virtqueue_napi_complete drivers/net/virtio_net.c:339 [inline]
 virtnet_poll+0xca2/0x11b0 drivers/net/virtio_net.c:1557
 __napi_poll+0xaf/0x440 net/core/dev.c:7023
 napi_poll net/core/dev.c:7090 [inline]
 net_rx_action+0x801/0xb40 net/core/dev.c:7177
 __do_softirq+0x29b/0x9c2 kernel/softirq.c:558

Freed by task 13:
 kasan_save_stack+0x1e/0x50 mm/kasan/common.c:38
 kasan_set_track+0x21/0x30 mm/kasan/common.c:46
 kasan_set_free_info+0x20/0x30 mm/kasan/generic.c:370
 ____kasan_slab_free mm/kasan/common.c:366 [inline]
 ____kasan_slab_free mm/kasan/common.c:328 [inline]
 __kasan_slab_free+0xff/0x130 mm/kasan/common.c:374
 kasan_slab_free include/linux/kasan.h:235 [inline]
 slab_free_hook mm/slub.c:1723 [inline]
 slab_free_freelist_hook+0x8b/0x1c0 mm/slub.c:1749
 slab_free mm/slub.c:3513 [inline]
 kmem_cache_free+0xbd/0x5d0 mm/slub.c:3530
 dst_destroy+0x2d6/0x3f0 net/core/dst.c:127
 rcu_do_batch kernel/rcu/tree.c:2506 [inline]
 rcu_core+0x7ab/0x1470 kernel/rcu/tree.c:2741
 __do_softirq+0x29b/0x9c2 kernel/softirq.c:558

Last potentially related work creation:
 kasan_save_stack+0x1e/0x50 mm/kasan/common.c:38
 __kasan_record_aux_stack+0xf5/0x120 mm/kasan/generic.c:348
 __call_rcu kernel/rcu/tree.c:2985 [inline]
 call_rcu+0xb1/0x740 kernel/rcu/tree.c:3065
 dst_release net/core/dst.c:177 [inline]
 dst_release+0x79/0xe0 net/core/dst.c:167
 tcp_v4_do_rcv+0x612/0x8d0 net/ipv4/tcp_ipv4.c:1712
 sk_backlog_rcv include/net/sock.h:1030 [inline]
 __release_sock+0x134/0x3b0 net/core/sock.c:2768
 release_sock+0x54/0x1b0 net/core/sock.c:3300
 tcp_sendmsg+0x36/0x40 net/ipv4/tcp.c:1441
 inet_sendmsg+0x99/0xe0 net/ipv4/af_inet.c:819
 sock_sendmsg_nosec net/socket.c:704 [inline]
 sock_sendmsg+0xcf/0x120 net/socket.c:724
 sock_write_iter+0x289/0x3c0 net/socket.c:1057
 call_write_iter include/linux/fs.h:2162 [inline]
 new_sync_write+0x429/0x660 fs/read_write.c:503
 vfs_write+0x7cd/0xae0 fs/read_write.c:590
 ksys_write+0x1ee/0x250 fs/read_write.c:643
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

The buggy address belongs to the object at ffff88807f1cb700
 which belongs to the cache ip_dst_cache of size 176
The buggy address is located 58 bytes inside of
 176-byte region [ffff88807f1cb700, ffff88807f1cb7b0)
The buggy address belongs to the page:
page:ffffea0001fc72c0 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x7f1cb
flags: 0xfff00000000200(slab|node=0|zone=1|lastcpupid=0x7ff)
raw: 00fff00000000200 dead000000000100 dead000000000122 ffff8881413bb780
raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
page_owner tracks the page as allocated
page last allocated via order 0, migratetype Unmovable, gfp_mask 0x112a20(GFP_ATOMIC|__GFP_NOWARN|__GFP_NORETRY|__GFP_HARDWALL), pid 5, ts 108466983062, free_ts 108048976062
 prep_new_page mm/page_alloc.c:2418 [inline]
 get_page_from_freelist+0xa72/0x2f50 mm/page_alloc.c:4149
 __alloc_pages+0x1b2/0x500 mm/page_alloc.c:5369
 alloc_pages+0x1a7/0x300 mm/mempolicy.c:2191
 alloc_slab_page mm/slub.c:1793 [inline]
 allocate_slab mm/slub.c:1930 [inline]
 new_slab+0x32d/0x4a0 mm/slub.c:1993
 ___slab_alloc+0x918/0xfe0 mm/slub.c:3022
 __slab_alloc.constprop.0+0x4d/0xa0 mm/slub.c:3109
 slab_alloc_node mm/slub.c:3200 [inline]
 slab_alloc mm/slub.c:3242 [inline]
 kmem_cache_alloc+0x35c/0x3a0 mm/slub.c:3247
 dst_alloc+0x146/0x1f0 net/core/dst.c:92
 rt_dst_alloc+0x73/0x430 net/ipv4/route.c:1613
 __mkroute_output net/ipv4/route.c:2564 [inline]
 ip_route_output_key_hash_rcu+0x921/0x2d00 net/ipv4/route.c:2791
 ip_route_output_key_hash+0x18b/0x300 net/ipv4/route.c:2619
 __ip_route_output_key include/net/route.h:126 [inline]
 ip_route_output_flow+0x23/0x150 net/ipv4/route.c:2850
 ip_route_output_key include/net/route.h:142 [inline]
 geneve_get_v4_rt+0x3a6/0x830 drivers/net/geneve.c:809
 geneve_xmit_skb drivers/net/geneve.c:899 [inline]
 geneve_xmit+0xc4a/0x3540 drivers/net/geneve.c:1082
 __netdev_start_xmit include/linux/netdevice.h:4994 [inline]
 netdev_start_xmit include/linux/netdevice.h:5008 [inline]
 xmit_one net/core/dev.c:3590 [inline]
 dev_hard_start_xmit+0x1eb/0x920 net/core/dev.c:3606
 __dev_queue_xmit+0x299a/0x3650 net/core/dev.c:4229
page last free stack trace:
 reset_page_owner include/linux/page_owner.h:24 [inline]
 free_pages_prepare mm/page_alloc.c:1338 [inline]
 free_pcp_prepare+0x374/0x870 mm/page_alloc.c:1389
 free_unref_page_prepare mm/page_alloc.c:3309 [inline]
 free_unref_page+0x19/0x690 mm/page_alloc.c:3388
 qlink_free mm/kasan/quarantine.c:146 [inline]
 qlist_free_all+0x5a/0xc0 mm/kasan/quarantine.c:165
 kasan_quarantine_reduce+0x180/0x200 mm/kasan/quarantine.c:272
 __kasan_slab_alloc+0xa2/0xc0 mm/kasan/common.c:444
 kasan_slab_alloc include/linux/kasan.h:259 [inline]
 slab_post_alloc_hook mm/slab.h:519 [inline]
 slab_alloc_node mm/slub.c:3234 [inline]
 kmem_cache_alloc_node+0x255/0x3f0 mm/slub.c:3270
 __alloc_skb+0x215/0x340 net/core/skbuff.c:414
 alloc_skb include/linux/skbuff.h:1126 [inline]
 alloc_skb_with_frags+0x93/0x620 net/core/skbuff.c:6078
 sock_alloc_send_pskb+0x783/0x910 net/core/sock.c:2575
 mld_newpack+0x1df/0x770 net/ipv6/mcast.c:1754
 add_grhead+0x265/0x330 net/ipv6/mcast.c:1857
 add_grec+0x1053/0x14e0 net/ipv6/mcast.c:1995
 mld_send_initial_cr.part.0+0xf6/0x230 net/ipv6/mcast.c:2242
 mld_send_initial_cr net/ipv6/mcast.c:1232 [inline]
 mld_dad_work+0x1d3/0x690 net/ipv6/mcast.c:2268
 process_one_work+0x9b2/0x1690 kernel/workqueue.c:2298
 worker_thread+0x658/0x11f0 kernel/workqueue.c:2445

Memory state around the buggy address:
 ffff88807f1cb600: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff88807f1cb680: fb fb fb fb fb fb fc fc fc fc fc fc fc fc fc fc
>ffff88807f1cb700: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                                        ^
 ffff88807f1cb780: fb fb fb fb fb fb fc fc fc fc fc fc fc fc fc fc
 ffff88807f1cb800: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb

---
 include/net/sock.h   |    2 +-
 net/ipv4/af_inet.c   |    2 +-
 net/ipv4/tcp.c       |    3 +--
 net/ipv4/tcp_input.c |    2 +-
 net/ipv4/tcp_ipv4.c  |   11 +++++++----
 net/ipv4/udp.c       |    6 +++---
 net/ipv6/tcp_ipv6.c  |   11 +++++++----
 net/ipv6/udp.c       |    4 ++--
 8 files changed, 23 insertions(+), 18 deletions(-)

@@ -389,7 +389,7 @@ struct sock {
 #ifdef CONFIG_XFRM
 	struct xfrm_policy __rcu *sk_policy[2];
 #endif
-	struct dst_entry	*sk_rx_dst;
+	struct dst_entry __rcu	*sk_rx_dst;
 	struct dst_entry __rcu	*sk_dst_cache;
 	atomic_t		sk_omem_alloc;
 	int			sk_sndbuf;

@@ -156,7 +156,7 @@ void inet_sock_destruct(struct sock *sk)
 
 	kfree(rcu_dereference_protected(inet->inet_opt, 1));
 	dst_release(rcu_dereference_check(sk->sk_dst_cache, 1));
-	dst_release(sk->sk_rx_dst);
+	dst_release(rcu_dereference_protected(sk->sk_rx_dst, 1));
 	sk_refcnt_debug_dec(sk);
 }
 EXPORT_SYMBOL(inet_sock_destruct);

@@ -2385,8 +2385,7 @@ int tcp_disconnect(struct sock *sk, int
 	tcp_init_send_head(sk);
 	memset(&tp->rx_opt, 0, sizeof(tp->rx_opt));
 	__sk_dst_reset(sk);
-	dst_release(sk->sk_rx_dst);
-	sk->sk_rx_dst = NULL;
+	dst_release(xchg((__force struct dst_entry **)&sk->sk_rx_dst, NULL));
 	tcp_saved_syn_free(tp);
 	tp->segs_in = 0;
 	tp->segs_out = 0;

@@ -5452,7 +5452,7 @@ void tcp_rcv_established(struct sock *sk
 	struct tcp_sock *tp = tcp_sk(sk);
 
 	tcp_mstamp_refresh(tp);
-	if (unlikely(!sk->sk_rx_dst))
+	if (unlikely(!rcu_access_pointer(sk->sk_rx_dst)))
 		inet_csk(sk)->icsk_af_ops->sk_rx_dst_set(sk, skb);
 	/*
 	 *	Header prediction.

@@ -1473,15 +1473,18 @@ int tcp_v4_do_rcv(struct sock *sk, struc
 	struct sock *rsk;
 
 	if (sk->sk_state == TCP_ESTABLISHED) { /* Fast path */
-		struct dst_entry *dst = sk->sk_rx_dst;
+		struct dst_entry *dst;
+
+		dst = rcu_dereference_protected(sk->sk_rx_dst,
+						lockdep_sock_is_held(sk));
 
 		sock_rps_save_rxhash(sk, skb);
 		sk_mark_napi_id(sk, skb);
 		if (dst) {
 			if (inet_sk(sk)->rx_dst_ifindex != skb->skb_iif ||
 			    !dst->ops->check(dst, 0)) {
+				RCU_INIT_POINTER(sk->sk_rx_dst, NULL);
 				dst_release(dst);
-				sk->sk_rx_dst = NULL;
 			}
 		}
 		tcp_rcv_established(sk, skb, tcp_hdr(skb));

@@ -1556,7 +1559,7 @@ int tcp_v4_early_demux(struct sk_buff *s
 		skb->sk = sk;
 		skb->destructor = sock_edemux;
 		if (sk_fullsock(sk)) {
-			struct dst_entry *dst = READ_ONCE(sk->sk_rx_dst);
+			struct dst_entry *dst = rcu_dereference(sk->sk_rx_dst);
 
 			if (dst)
 				dst = dst_check(dst, 0);

@@ -1849,7 +1852,7 @@ void inet_sk_rx_dst_set(struct sock *sk,
 	struct dst_entry *dst = skb_dst(skb);
 
 	if (dst && dst_hold_safe(dst)) {
-		sk->sk_rx_dst = dst;
+		rcu_assign_pointer(sk->sk_rx_dst, dst);
 		inet_sk(sk)->rx_dst_ifindex = skb->skb_iif;
 	}
 }

@@ -1955,7 +1955,7 @@ bool udp_sk_rx_dst_set(struct sock *sk,
 	struct dst_entry *old;
 
 	if (dst_hold_safe(dst)) {
-		old = xchg(&sk->sk_rx_dst, dst);
+		old = xchg((__force struct dst_entry **)&sk->sk_rx_dst, dst);
 		dst_release(old);
 		return old != dst;
 	}

@@ -2145,7 +2145,7 @@ int __udp4_lib_rcv(struct sk_buff *skb,
 		struct dst_entry *dst = skb_dst(skb);
 		int ret;
 
-		if (unlikely(sk->sk_rx_dst != dst))
+		if (unlikely(rcu_dereference(sk->sk_rx_dst) != dst))
 			udp_sk_rx_dst_set(sk, dst);
 
 		ret = udp_unicast_rcv_skb(sk, skb, uh);

@@ -2303,7 +2303,7 @@ int udp_v4_early_demux(struct sk_buff *s
 
 	skb->sk = sk;
 	skb->destructor = sock_efree;
-	dst = READ_ONCE(sk->sk_rx_dst);
+	dst = rcu_dereference(sk->sk_rx_dst);
 
 	if (dst)
 		dst = dst_check(dst, 0);

@@ -95,7 +95,7 @@ static void inet6_sk_rx_dst_set(struct s
 	if (dst && dst_hold_safe(dst)) {
 		const struct rt6_info *rt = (const struct rt6_info *)dst;
 
-		sk->sk_rx_dst = dst;
+		rcu_assign_pointer(sk->sk_rx_dst, dst);
 		inet_sk(sk)->rx_dst_ifindex = skb->skb_iif;
 		inet6_sk(sk)->rx_dst_cookie = rt6_get_cookie(rt);
 	}

@@ -1318,15 +1318,18 @@ static int tcp_v6_do_rcv(struct sock *sk
 		opt_skb = skb_clone(skb, sk_gfp_mask(sk, GFP_ATOMIC));
 
 	if (sk->sk_state == TCP_ESTABLISHED) { /* Fast path */
-		struct dst_entry *dst = sk->sk_rx_dst;
+		struct dst_entry *dst;
+
+		dst = rcu_dereference_protected(sk->sk_rx_dst,
+						lockdep_sock_is_held(sk));
 
 		sock_rps_save_rxhash(sk, skb);
 		sk_mark_napi_id(sk, skb);
 		if (dst) {
 			if (inet_sk(sk)->rx_dst_ifindex != skb->skb_iif ||
 			    dst->ops->check(dst, np->rx_dst_cookie) == NULL) {
+				RCU_INIT_POINTER(sk->sk_rx_dst, NULL);
 				dst_release(dst);
-				sk->sk_rx_dst = NULL;
 			}
 		}
 

@@ -1659,7 +1662,7 @@ static void tcp_v6_early_demux(struct sk
 		skb->sk = sk;
 		skb->destructor = sock_edemux;
 		if (sk_fullsock(sk)) {
-			struct dst_entry *dst = READ_ONCE(sk->sk_rx_dst);
+			struct dst_entry *dst = rcu_dereference(sk->sk_rx_dst);
 
 			if (dst)
 				dst = dst_check(dst, inet6_sk(sk)->rx_dst_cookie);

@@ -848,7 +848,7 @@ int __udp6_lib_rcv(struct sk_buff *skb,
 		struct dst_entry *dst = skb_dst(skb);
 		int ret;
 
-		if (unlikely(sk->sk_rx_dst != dst))
+		if (unlikely(rcu_dereference(sk->sk_rx_dst) != dst))
 			udp6_sk_rx_dst_set(sk, dst);
 
 		if (!uh->check && !udp_sk(sk)->no_check6_rx) {

@@ -960,7 +960,7 @@ static void udp_v6_early_demux(struct sk
 
 	skb->sk = sk;
 	skb->destructor = sock_efree;
-	dst = READ_ONCE(sk->sk_rx_dst);
+	dst = rcu_dereference(sk->sk_rx_dst);
 
 	if (dst)
 		dst = dst_check(dst, inet6_sk(sk)->rx_dst_cookie);

From: Rafael J. Wysocki <[email protected]>

commit 4bb7f6c2781e46fc5bd00475a66df2ea30ef330d upstream.

Commit 68b99e94a4a2 ("thermal: intel_powerclamp: Use get_cpu() instead of smp_processor_id() to avoid crash") fixed an issue related to using smp_processor_id() in preemptible context by replacing it with a pair of get_cpu()/put_cpu(), but what is needed there really is any online CPU and not necessarily the one currently running the code. Arguably, getting the one that's running the code in there is confusing.

For this reason, simply give the control CPU role to the first online one which automatically will be CPU0 if it is online, so one check can be dropped from the code for an added benefit.

---
 drivers/thermal/intel_powerclamp.c |    6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)

@@ -549,11 +549,7 @@ static int start_power_clamp(void)
 	get_online_cpus();
 
 	/* prefer BSP */
-	control_cpu = 0;
-	if (!cpu_online(control_cpu)) {
-		control_cpu = get_cpu();
-		put_cpu();
-	}
+	control_cpu = cpumask_first(cpu_online_mask);
 
 	clamping = true;
 	schedule_delayed_work(&poll_pkg_cstate_work, 0);

Build results:

	total: 170 pass: 170 fail: 0
Qemu test results:
	total: 422 pass: 422 fail: 0

Guenter

Results from Linaro's test farm.
No regressions on arm64, arm, x86_64, and i386.

## Build
* kernel: 4.14.296-rc1
* git: https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc
* git branch: linux-4.14.y
* git commit: a6ecd3a0366ab2989ed6efc0f00a9af63cd46086
* git describe: v4.14.295-211-ga6ecd3a0366a
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-4.14.y/build/v4.14.295-211-ga6ecd3a0366a

## No Test Regressions (compared to v4.14.295)

## No Metric Regressions (compared to v4.14.295)

## No Test Fixes (compared to v4.14.295)

## No Metric Fixes (compared to v4.14.295)

## Test result summary
total: 103404, pass: 86901, fail: 1381, skip: 14220, xfail: 902

## Build Summary
* arc: 10 total, 10 passed, 0 failed
* arm: 313 total, 308 passed, 5 failed
* arm64: 53 total, 50 passed, 3 failed
* i386: 29 total, 28 passed, 1 failed
* mips: 41 total, 41 passed, 0 failed
* parisc: 12 total, 12 passed, 0 failed
* powerpc: 20 total, 19 passed, 1 failed
* s390: 15 total, 11 passed, 4 failed
* sh: 24 total, 24 passed, 0 failed
* sparc: 12 total, 12 passed, 0 failed
* x86_64: 50 total, 49 passed, 1 failed

## Test suites summary
* fwts
* igt-gpu-tools
* kselftest-android
* kselftest-arm64
* kselftest-arm64/arm64.btitest.bti_c_func
* kselftest-arm64/arm64.btitest.bti_j_func
* kselftest-arm64/arm64.btitest.bti_jc_func
* kselftest-arm64/arm64.btitest.bti_none_func
* kselftest-arm64/arm64.btitest.nohint_func
* kselftest-arm64/arm64.btitest.paciasp_func
* kselftest-arm64/arm64.nobtitest.bti_c_func
* kselftest-arm64/arm64.nobtitest.bti_j_func
* kselftest-arm64/arm64.nobtitest.bti_jc_func
* kselftest-arm64/arm64.nobtitest.bti_none_func
* kselftest-arm64/arm64.nobtitest.nohint_func
* kselftest-arm64/arm64.nobtitest.paciasp_func
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-drivers-dma-buf
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-filesystems-binderfs
* kselftest-firmware
* kselftest-fpu
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-livepatch
* kselftest-membarrier
* kselftest-net
* kselftest-net-forwarding
* kselftest-netfilter
* kselftest-nsfs
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-ptrace
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-tc-testing
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-vm
* kselftest-x86
* kselftest-zram
* kunit
* kvm-unit-tests
* libhugetlbfs
* log-parser-boot
* log-parser-test
* ltp-cap_bounds
* ltp-commands
* ltp-containers
* ltp-controllers
* ltp-cpuhotplug
* ltp-crypto
* ltp-cve
* ltp-dio
* ltp-fcntl-locktests
* ltp-filecaps
* ltp-fs
* ltp-fs_bind
* ltp-fs_perms_simple
* ltp-fsx
* ltp-hugetlb
* ltp-io
* ltp-ipc
* ltp-math
* ltp-mm
* ltp-nptl
* ltp-open-posix-tests
* ltp-pty
* ltp-sched
* ltp-securebits
* ltp-smoke
* ltp-syscalls
* ltp-tracing
* network-basic-tests
* packetdrill
* rcutorture
* v4l2-compliance
* vdso

--
Linaro LKFT
https://lkft.linaro.org