Arm: Enable GICv3 for AArch32
cover Arm: Enable GICv3 for AArch32
Hi All,
Please find the following patches to enable GICv3 for AArch32. This is a pre-requisite to support Xen on Cortex-R52 (AArch32-v8R system)
Let me know your thoughts.
Ayan Kumar Halder (12):
Arm: GICv3: Sysreg emulation is applicable for Aarch64 only
Arm: GICv3: Move the macros to compute the affnity level to
arm64/arm32
Arm: GICv3: Enable vreg_reg64_* macros for AArch32
Arm: GICv3: Emulate GICR_TYPER on AArch32
Arm: GICv3: Emulate GICR_PENDBASER and GICR_PROPBASER on AArch32
Arm: GICv3: Emulate of ICC_SGI1R on AArch32
Arm: GICv3: Emulate ICH_LR<n>_EL2 on AArch32
Arm: GICv3: Define ICH_AP0R<n> and ICH_AP1R<n> for AArch32
Arm: GICv3: Define GIC registers for AArch32
Arm: GICv3: Use ULL instead of UL for 64bits
Arm: GICv3: Define macros to read/write 64 bit
Arm: GICv3: Enable GICv3 for AArch32
xen/arch/arm/Kconfig | 2 +- xen/arch/arm/gic-v3-its.c | 20 ++-- xen/arch/arm/gic-v3-lpi.c | 8 +- xen/arch/arm/gic-v3.c | 132 ++++++++++----------- xen/arch/arm/include/asm/arm32/io.h | 4 + xen/arch/arm/include/asm/arm32/processor.h | 10 ++ xen/arch/arm/include/asm/arm32/sysregs.h | 80 +++++++++++++ xen/arch/arm/include/asm/arm64/processor.h | 13 ++ xen/arch/arm/include/asm/arm64/sysregs.h | 7 +- xen/arch/arm/include/asm/cpufeature.h | 1 + xen/arch/arm/include/asm/gic_v3_defs.h | 24 ++-- xen/arch/arm/include/asm/gic_v3_its.h | 2 +- xen/arch/arm/include/asm/processor.h | 14 --- xen/arch/arm/include/asm/vreg.h | 23 ++-- xen/arch/arm/vgic-v3-its.c | 17 +-- xen/arch/arm/vgic-v3.c | 26 ++-- 16 files changed, 242 insertions(+), 141 deletions(-)
Signature · 1 line
2.17.1
RFC PATCH 1/12 Arm: GICv3: Sysreg emulation is applicable for Aarch64 only
Refer ARM DDI 0487G.b ID072021, EC==0b011000 is supported for Aarch64 state only. This is when MSR, MRS, System instruction execution in AArch64 state is trapped, that is not reported using EC 0b000000, 0b000001 or 0b000111.
--- xen/arch/arm/vgic-v3.c | 4 ++++ 1 file changed, 4 insertions(+)
xen/arch/arm/vgic-v3.c +4 -0
@@ -1520,6 +1520,7 @@ static bool vgic_v3_emulate_sgi1r(struct cpu_user_regs *regs, uint64_t *r, } } +#ifdef CONFIG_ARM_64 static bool vgic_v3_emulate_sysreg (struct cpu_user_regs *regs,union hsr hsr) {struct hsr_sysreg sysreg = hsr.sysreg;
@@ -1540,6 +1541,7 @@ static bool vgic_v3_emulate_sysreg(struct cpu_user_regs *regs, union hsr hsr) return false; } } +#endif static bool vgic_v3_emulate_cp64 (struct cpu_user_regs *regs,union hsr hsr) {
@@ -1563,8 +1565,10 @@ static bool vgic_v3_emulate_reg(struct cpu_user_regs *regs, union hsr hsr) {switch (hsr.ec) { +#ifdef CONFIG_ARM_64 case HSR_EC_SYSREG :return vgic_v3_emulate_sysreg (regs, hsr); +#endif case HSR_EC_CP15_64 :return vgic_v3_emulate_cp64 (regs, hsr);default :
Signature · 1 line
2.17.1
Re: [RFC PATCH v1 01/12] Arm: GICv3: Sysreg emulation is applicable for Aarch64 only
NACK, Please ignore this. I have sent by mistake.
Quoted 40 lines · Ayan Kumar Halder
Refer ARM DDI 0487G.b ID072021, EC==0b011000 is supported for Aarch64 state only. This is when MSR, MRS, System instruction execution in AArch64 state is trapped, that is not reported using EC
0b000000,0b000001or0b000111.Signed-off-by Ayan Kumar Halder <[email protected]>--- xen/arch/arm/vgic-v3.c | 4 ++++ 1 file changed, 4 insertions(+)xen/arch/arm/vgic-v3.c +4
-0@@ -1520,6 +1520,7 @@ static bool vgic_v3_emulate_sgi1r(struct cpu_user_regs *regs, uint64_t *r, } } +#ifdef CONFIG_ARM_64 static bool vgic_v3_emulate_sysreg (struct cpu_user_regs *regs,union hsr hsr) {struct hsr_sysreg sysreg = hsr.sysreg;@@ -1540,6 +1541,7 @@ static bool vgic_v3_emulate_sysreg(struct cpu_user_regs *regs, union hsr hsr) return false; } } +#endif static bool vgic_v3_emulate_cp64 (struct cpu_user_regs *regs,union hsr hsr) {@@ -1563,8 +1565,10 @@ static bool vgic_v3_emulate_reg(struct cpu_user_regs *regs, union hsr hsr) {switch (hsr.ec) { +#ifdef CONFIG_ARM_64 case HSR_EC_SYSREG :return vgic_v3_emulate_sysreg (regs, hsr); +#endif case HSR_EC_CP15_64 :return vgic_v3_emulate_cp64 (regs, hsr);default :
Quoted 6 lines · Ayan Kumar Halder
Hi All,
Please find the following patches to enable GICv3 for AArch32. This is a pre-requisite to support Xen on Cortex-R52 (AArch32-v8R system)
Let me know your thoughts.
NACK. Please ignore this. I have sent by mistake.
Quoted 34 lines
Ayan Kumar Halder (12):
Arm: GICv3: Sysreg emulation is applicable for Aarch64 only
Arm: GICv3: Move the macros to compute the affnity level toarm64/arm32Arm: GICv3: Enable vreg_reg64_* macros for AArch32
Arm: GICv3: EmulateGICR_TYPERon AArch32
Arm: GICv3: EmulateGICR_PENDBASERandGICR_PROPBASERon AArch32
Arm: GICv3: Emulate ofICC_SGI1Ron AArch32
Arm: GICv3: Emulate ICH_LR<n>_EL2 on AArch32
Arm: GICv3: Define ICH_AP0R<n> and ICH_AP1R<n> for AArch32
Arm: GICv3: Define GIC registers for AArch32
Arm: GICv3: Use ULL instead of UL for 64bits
Arm: GICv3: Define macros to read/write 64 bit
Arm: GICv3: Enable GICv3 for AArch32xen/arch/arm/Kconfig | 2 +- xen/arch/arm/gic-v3-its.c | 20 ++-- xen/arch/arm/gic-v3-lpi.c | 8 +- xen/arch/arm/gic-v3.c | 132 ++++++++++----------- xen/arch/arm/include/asm/arm32/io.h | 4 + xen/arch/arm/include/asm/arm32/processor.h | 10 ++ xen/arch/arm/include/asm/arm32/sysregs.h | 80 +++++++++++++ xen/arch/arm/include/asm/arm64/processor.h | 13 ++ xen/arch/arm/include/asm/arm64/sysregs.h | 7 +- xen/arch/arm/include/asm/cpufeature.h | 1 + xen/arch/arm/include/asm/gic_v3_defs.h | 24 ++-- xen/arch/arm/include/asm/gic_v3_its.h | 2 +- xen/arch/arm/include/asm/processor.h | 14 --- xen/arch/arm/include/asm/vreg.h | 23 ++-- xen/arch/arm/vgic-v3-its.c | 17 +-- xen/arch/arm/vgic-v3.c | 26 ++-- 16 files changed, 242 insertions(+), 141 deletions(-)