docs: fix some typos
PATCH 1/1 docs: fix some typos
From: zhangdongdong <[email protected]>
Corrected the typos of some documents in the 'docs' folder.
Signed-off-by zhangdongdong <[email protected]>
--- docs/contributing.md | 2 +- docs/firmware/fw_dynamic.md | 2 +- docs/platform/fpga-ariane.md | 2 +- docs/platform/sifive_fu540.md | 2 +- docs/platform/thead-c9xx.md | 2 +- 5 files changed, 5 insertions(+), 5 deletions(-)
docs/contributing.md +1 -1
@@ -29,7 +29,7 @@ and "top:". 5. Maintainers should use "Rebase and Merge" when using GitHub to merge pull requests to avoid creating unnecessary merge commits. 6. Maintainers should avoid creating branches directly in the main -riscv/opensbi repository. Instead prefer using a fork of the riscv/opensbi main +riscv/opensbi repository. Instead, prefer using a fork of the riscv/opensbi main repository and branches within that fork to create pull requests. 7. A maintainer cannot merge his own pull requests in the riscv/opensbi main repository.
docs/firmware/fw_dynamic.md +1 -1
@@ -31,6 +31,6 @@ directory. *FW_DYNAMIC* Firmware Configuration Options ------------------------------------------- -The *FW_DYNAMIC* firmware does not requires any platform specific configuration +The *FW_DYNAMIC* firmware does not require any platform specific configuration parameters because all required information is passed by previous booting stage at runtime via *struct fw_dynamic_info*.
docs/platform/fpga-ariane.md +1 -1
@@ -7,7 +7,7 @@ Linux. The FPGA SoC currently contains the following peripherals: - DDR3 memory controller -- SPI controller to conncet to an SDCard +- SPI controller to connect to an SDCard - Ethernet controller - JTAG port (see debugging section below) - Bootrom containing zero stage bootloader and device tree.
docs/platform/sifive_fu540.md +1 -1
@@ -150,7 +150,7 @@ If you want to test OpenSBI with QEMU 'sifive_u' machine, please follow the same instructions above, with the exception of not passing FW_FDT_PATH. This is because QEMU generates a device tree blob on the fly based on the -command line parameters and it's compatible with the one used in the upstream +command line parameters, and it's compatible with the one used in the upstream Linux kernel. When U-Boot v2021.07 (or higher) is used as the payload, as the SiFive FU540
docs/platform/thead-c9xx.md +1 -1
@@ -13,7 +13,7 @@ Platform Options ---------------- The *T-HEAD C9xx* does not have any platform-specific compile options -because it use generic platform. +because it uses generic platform. ``` CROSS_COMPILE=riscv64-linux-gnu- PLATFORM=generic /usr/bin/make
Signature · 1 line
2.17.1
Anup Patel
AppliedPATCH 1/1 docs: fix some typos
Quoted 6 lines · On Tue, Oct 25, 2022 at 6:28 AM <[email protected]> wrote:
From: zhangdongdong <[email protected]>
Corrected the typos of some documents in the 'docs' folder.
Signed-off-by zhangdongdong <[email protected]>
Looks good to me.
Reviewed-by Anup Patel <[email protected]>
Applied this patch to the riscv/opensbi repo.
Thanks,
Anup
Quoted 80 lines
--- docs/contributing.md | 2 +- docs/firmware/fw_dynamic.md | 2 +- docs/platform/fpga-ariane.md | 2 +- docs/platform/sifive_fu540.md | 2 +- docs/platform/thead-c9xx.md | 2 +- 5 files changed, 5 insertions(+), 5 deletions(-)docs/contributing.md +1
-1@@ -29,7 +29,7 @@ and "top:". 5. Maintainers should use "Rebase and Merge" when using GitHub to merge pull requests to avoid creating unnecessary merge commits. 6. Maintainers should avoid creating branches directly in the main -riscv/opensbi repository. Instead prefer using a fork of the riscv/opensbi main +riscv/opensbi repository. Instead, prefer using a fork of the riscv/opensbi main repository and branches within that fork to create pull requests. 7. A maintainer cannot merge his own pull requests in the riscv/opensbi main repository.docs/firmware/fw_dynamic.md +1
-1@@ -31,6 +31,6 @@ directory. *FW_DYNAMIC* Firmware Configuration Options ------------------------------------------- -The *FW_DYNAMIC* firmware does not requires any platform specific configuration +The *FW_DYNAMIC* firmware does not require any platform specific configuration parameters because all required information is passed by previous booting stage at runtime via *struct fw_dynamic_info*.docs/platform/fpga-ariane.md +1
-1@@ -7,7 +7,7 @@ Linux. The FPGA SoC currently contains the following peripherals: - DDR3 memory controller -- SPI controller to conncet to an SDCard +- SPI controller to connect to an SDCard - Ethernet controller - JTAG port (see debugging section below) - Bootrom containing zero stage bootloader and device tree.docs/platform/sifive_fu540.md +1
-1@@ -150,7 +150,7 @@ If you want to test OpenSBI with QEMU 'sifive_u' machine, please follow the same instructions above, with the exception of not passing FW_FDT_PATH. This is because QEMU generates a device tree blob on the fly based on the -command line parameters and it's compatible with the one used in the upstream +command line parameters, and it's compatible with the one used in the upstream Linux kernel. When U-Boot v2021.07 (or higher) is used as the payload, as the SiFive FU540docs/platform/thead-c9xx.md +1
-2@@ -13,7 +13,7 @@ Platform Options ---------------- The *T-HEAD C9xx* does not have any platform-specific compile options -because it use generic platform. +because it uses generic platform. ``` CROSS_COMPILE=riscv64-linux-gnu- PLATFORM=generic /usr/bin/make --2.17.1
--
opensbi mailing list
opensbi at lists.infradead.org
http://lists.infradead.org/mailman/listinfo/opensbi