imx: imx8qxp: giedi switch to binman
Subsystems (3)
PATCH 1/1 imx: imx8qxp: giedi switch to binman
Signed-off-by Oliver Graute <[email protected]>
--- arch/arm/dts/imx8qxp-capricorn-u-boot.dtsi | 127 +++++++++++++++++++++ arch/arm/mach-imx/imx8/Kconfig | 1 + board/siemens/capricorn/imximage.cfg | 2 +- configs/giedi_defconfig | 2 + 4 files changed, 131 insertions(+), 1 deletion(-)
arch/arm/dts/imx8qxp-capricorn-u-boot.dtsi +127 -0
@@ -3,6 +3,133 @@ * Copyright 2019 Siemens AG */ +/ { + binman: binman { + multiple-images; + }; +}; + +&binman { + u-boot-spl-ddr { + align = <4>; + align-size = <4>; + filename = "u-boot-spl-ddr.bin"; + pad-byte = <0xff>; + + u-boot-spl { + align-end = <4>; + filename = "u-boot-spl.bin"; + }; + }; + + spl { + filename = "spl.bin"; + + mkimage { + args = "-n spl/u-boot-spl.cfgout -T imx8image -e 0x100000"; + + blob { + filename = "u-boot-spl-ddr.bin"; + }; + }; + }; + + itb { + filename = "u-boot.itb"; + + fit { + description = "Configuration to load ATF before U-Boot"; + fit,external-offset = <CONFIG_FIT_EXTERNAL_OFFSET>; + fit,fdt-list = "of-list"; + #address-cells = <1>; + + images { + uboot { + arch = "arm64"; + compression = "none"; + description = "U-Boot (64-bit)"; + load = <CONFIG_SYS_TEXT_BASE>; + type = "standalone"; + + uboot-blob { + filename = "u-boot-nodtb.bin"; + type = "blob-ext"; + }; + }; + + atf { + arch = "arm64"; + compression = "none"; + description = "ARM Trusted Firmware"; + entry = <0x00910000>; + load = <0x00091000>; + type = "firmware"; + + atf-blob { + filename = "bl31.bin"; + type = "atf-bl31"; + }; + }; + + scfw { + arch = "arm64"; + compression = "none"; + description = "System Controler Firmware"; + type = "firmware"; + + scfw_blob { + filename = "mx8qx-mek-scfw-tcm.bin"; + type = "blob-ext"; + }; + }; + + seco { + arch = "arm64"; + compression = "none"; + description = "Seco Firmware"; + type = "firmware"; + + seco_blob { + filename = "mx8qxc0-ahab-container.img"; + type = "blob-ext"; + }; + }; + + fdt { + type = "flat_dt"; + compression = "none"; + + uboot-fdt-blob { + filename = "u-boot.dtb"; + type = "blob-ext"; + }; + }; + }; + + configurations { + default = "conf"; + + conf { + fdt = "fdt"; + firmware = "uboot"; + loadables = "atf"; + }; + }; + }; + }; + + imx-boot { + filename = "flash.bin"; + pad-byte = <0x00>; + + spl { + filename = "spl.bin"; + offset = <0x0>; + type = "blob-ext"; + }; + }; +}; + &{/imx8qx-pm} { u-boot,dm-spl;
arch/arm/mach-imx/imx8/Kconfig +1 -0
@@ -62,6 +62,7 @@ config TARGET_DENEB config TARGET_GIEDI bool "Support i.MX8QXP Capricorn Giedi board" + select BINMAN select BOARD_LATE_INIT select FACTORYSET select IMX8QXP
board/siemens/capricorn/imximage.cfg +1 -1
@@ -8,7 +8,7 @@ /* Boot from SD, sector size 0x400 */ -BOOT_FROM SD 0x400 +BOOT_FROM sd /* SoC type IMX8QX */ SOC_TYPE IMX8QX /* Append seco container image */
configs/giedi_defconfig +2 -0
@@ -26,6 +26,8 @@ CONFIG_SYS_LOAD_ADDR=0x80280000 CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80200000 CONFIG_REMAKE_ELF=y +CONFIG_FIT=y +CONFIG_FIT_EXTERNAL_OFFSET=0x3000 CONFIG_OF_BOARD_SETUP=y CONFIG_OF_SYSTEM_SETUP=y CONFIG_BOOTDELAY=3
Signature · 1 line
2.17.1
PATCH 1/1 imx: imx8qxp: deneb switch to binman
Signed-off-by Oliver Graute <[email protected]>
--- arch/arm/mach-imx/imx8/Kconfig | 1 + configs/deneb_defconfig | 2 ++ 2 files changed, 3 insertions(+)
arch/arm/mach-imx/imx8/Kconfig +1 -0
@@ -56,6 +56,7 @@ config TARGET_COLIBRI_IMX8X config TARGET_DENEB bool "Support i.MX8QXP Capricorn Deneb board" + select BINMAN select BOARD_LATE_INIT select FACTORYSET select IMX8QXP
configs/deneb_defconfig +2 -0
@@ -26,6 +26,8 @@ CONFIG_SYS_LOAD_ADDR=0x80280000 CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80200000 CONFIG_REMAKE_ELF=y +CONFIG_FIT=y +CONFIG_FIT_EXTERNAL_OFFSET=0x3000 CONFIG_OF_BOARD_SETUP=y CONFIG_OF_SYSTEM_SETUP=y CONFIG_BOOTDELAY=3
Signature · 1 line
2.17.1
Re: [PATCH v1] imx: imx8qxp: deneb switch to binman
Quoted 23 lines · Oliver Graute
Signed-off-by Oliver Graute <[email protected]>--- arch/arm/mach-imx/imx8/Kconfig | 1 + configs/deneb_defconfig | 2 ++ 2 files changed, 3 insertions(+)arch/arm/mach-imx/imx8/Kconfig +1
-0@@ -56,6 +56,7 @@ config TARGET_COLIBRI_IMX8X config TARGET_DENEB bool "Support i.MX8QXP Capricorn Deneb board" + select BINMAN select BOARD_LATE_INIT select FACTORYSET select IMX8QXPconfigs/deneb_defconfig +0
-0
configs/deneb_defconfig CONFIG_SYS_LOAD_ADDR=0x80280000 · line 33
Quoted 8 lines
configs/deneb_defconfig +2
-0@@ -26,6 +26,8 @@ CONFIG_SYS_LOAD_ADDR=0x80280000 CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80200000 CONFIG_REMAKE_ELF=y +CONFIG_FIT=y +CONFIG_FIT_EXTERNAL_OFFSET=0x3000 CONFIG_OF_BOARD_SETUP=y CONFIG_OF_SYSTEM_SETUP=y CONFIG_BOOTDELAY=3
Reviewed-by Peng Fan <[email protected]>