Skip to contentSkip to conversation

mmapstress01: refactor to ltp framework

PATCH Applied Edward Liaw via ltp 4 participants 10 messages Oct 27, 2022 – Nov 14, 2022

lore
Share & tools
lore
#0 lore raw

v7 cover mmapstress01: refactor to ltp framework

v6->v7:
* clean up pattern option
* always print configuration info message

v5->v6:
* revert pidarray removal because children use the array index to determine read/write locations
* add option to specify pattern for reproducibility
* set default nprocs to ncpus with range between 1-20
* remove more comments

v4->v5:
* reformat top level comment to docparse format
* reduce amount of verbose comments
* clean up file size bounds definitions
* make finished variable volatile for >1 retries
* remove unnecessary pidarray because offloaded to test harness
* remove unnecessary sig blocks

v3->v4:
* squash previous changes
* set defaults of nprocs=20 and max_runtime=12
* clean up comments
* return TBROK instead of TFAIL for unexpected failures

v2->v3:
* apply make check lint suggestions
* refactor cleanup
* use SAFE_FORK
* update license

v1->v2:
* clean up formatting
* remove accidental change to header comment
* use SAFE_MMAP

v0->v1:
* use tst_test framework
* use FILE_OFFSET_BITS=64 instead of LARGE_FILE
* use safe macros

Edward Liaw (1):
mmapstress01: refactor to tst_test framework

 testcases/kernel/mem/mmapstress/Makefile      |   2 +
 .../kernel/mem/mmapstress/mmapstress01.c      | 886 +++++-------------
 2 files changed, 261 insertions(+), 627 deletions(-)
Signature · 5 lines
2.38.1.273.g43a17bfeac-goog


-- 
Mailing list info: https://lists.linux.it/listinfo/ltp
#1 lore raw

PATCH v7 1/1 mmapstress01: refactor to tst_test framework

Use ltp framework and apply make check corrections. Reorder functions and variables. Use safe macros.
Drop leavefile option.
Build tests with FILE_OFFSET_BITS=64 instead of doing LARGE_FILE checks to switch between 32 and 64 bit types and syscalls.
Define fsize bounds by file offset bits.
Move sighandler to setup and remove sig blocks.
Add option to specify pattern.
Set default nprocs to ncpus with min of 1 and max of 20.

---
 testcases/kernel/mem/mmapstress/Makefile      |   2 +
 .../kernel/mem/mmapstress/mmapstress01.c      | 886 +++++-------------
 2 files changed, 261 insertions(+), 627 deletions(-)
testcases/kernel/mem/mmapstress/Makefile +2 -0
index 744f099d8..b30bd34b8 100644
@@ -5,3 +5,5 @@ top_srcdir              ?= ../../../..
 
 include $(top_srcdir)/include/mk/testcases.mk
 include $(top_srcdir)/include/mk/generic_leaf_target.mk
+
+mmapstress01: CFLAGS += -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE
testcases/kernel/mem/mmapstress/mmapstress01.c +259 -627

984 lines not on this page · raw message

Signature · 5 lines
2.38.1.273.g43a17bfeac-goog


-- 
Mailing list info: https://lists.linux.it/listinfo/ltp
Reviewed-by on v7 1/1
#2 lore raw

Re: [LTP] [PATCH v7 1/1] mmapstress01: refactor to tst_test framework

Hello,

Quoted 11 lines · Edward Liaw via ltp

Use ltp framework and apply make check corrections. Reorder functions and variables. Use safe macros.
Drop leavefile option.
Build tests with FILE_OFFSET_BITS=64 instead of doing LARGE_FILE checks to switch between 32 and 64 bit types and syscalls.
Define fsize bounds by file offset bits.
Move sighandler to setup and remove sig blocks.
Add option to specify pattern.
Set default nprocs to ncpus with min of 1 and max of 20.

Will merge this today if the CI is happy and nobody comments.

Quoted 1,008 lines
---
 testcases/kernel/mem/mmapstress/Makefile      |   2 +
 .../kernel/mem/mmapstress/mmapstress01.c      | 886 +++++-------------
 2 files changed, 261 insertions(+), 627 deletions(-)
testcases/kernel/mem/mmapstress/Makefile +2 -0
index 744f099d8..b30bd34b8 100644
@@ -5,3 +5,5 @@ top_srcdir              ?= ../../../..
 
 include $(top_srcdir)/include/mk/testcases.mk
 include $(top_srcdir)/include/mk/generic_leaf_target.mk
+
+mmapstress01: CFLAGS += -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE
testcases/kernel/mem/mmapstress/mmapstress01.c +259 -627
index f425c223d..ac1b77387 100644
@@ -1,23 +1,24 @@
-/* IBM Corporation */
-/* 01/02/2003	Port to LTP [email protected] */
-/* 06/30/2001	Port to Linux	[email protected] */
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
- *   Copyright (c) International Business Machines  Corp., 2003
- *
- *
- *   This program is free software;  you can redistribute it and/or modify
- *   it under the terms of the GNU General Public License as published by
- *   the Free Software Foundation; either version 2 of the License, or
- *   (at your option) any later version.
- *
- *   This program is distributed in the hope that it will be useful,
- *   but WITHOUT ANY WARRANTY;  without even the implied warranty of
- *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
- *   the GNU General Public License for more details.
+ * Copyright (c) International Business Machines  Corp., 2003
+ * 01/02/2003	Port to LTP [email protected]
+ * 06/30/2001	Port to Linux	[email protected]
+ * 10/03/2022	Refactor to LTP framework	[email protected]
+ */
+/*\
+ * [Description]
+ * This test stresses mmaps, without dealing with fragments or anything!
+ * It forks a specified number of children,
+ * all of whom mmap the same file, make a given number of accesses
+ * to random pages in the map (reading & writing and comparing data).
+ * Then the child exits and the parent forks another to take its place.
+ * Each time a child is forked, it stats the file and maps the full
+ * length of the file.
  *
- *   You should have received a copy of the GNU General Public License
- *   along with this program;  if not, write to the Free Software
- *   Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ * This program continues to run until it either receives a SIGINT,
+ * or times out (if a timeout value is specified).  When either of
+ * these things happens, it cleans up its kids, then checks the
+ * file to make sure it has the correct data.
  */
 
 #define _GNU_SOURCE 1
@@ -32,517 +33,159 @@
 #include <errno.h>
 #include <sys/types.h>
 #include <limits.h>
-/*****  LTP Port        *****/
-#include "test.h"
-#define FAILED 0
-#define PASSED 1
-
-int local_flag = PASSED;
-char *TCID = "mmapstress01";	//tmnoextend
-FILE *temp;
-int TST_TOTAL = 1;
-
-int anyfail();
-void ok_exit();
-/*****  **      **      *****/
-
-/*
- *  This test stresses mmaps, without dealing with fragments or anything!
- *  It forks a specified number of children,
- *  all of whom mmap the same file, make a given number of accesses
- *  to random pages in the map (reading & writing and comparing data).
- *  Then the child exits and the parent forks another to take its place.
- *  Each time a child is forked, it stats the file and maps the full
- *  length of the file.
- *
- *  This program continues to run until it either receives a SIGINT,
- *  or times out (if a timeout value is specified).  When either of
- *  these things happens, it cleans up its kids, then checks the
- *  file to make sure it has the correct data.
- *
- *  usage:
- *	tmnoextend -p nprocs [-t minutes -f filesize -S sparseoffset
- *			      -r -o -m -l -d]
- *  where:
- *	-p nprocs	- specifies the number of mapping children
- *			  to create.  (nprocs + 1 children actually
- *			  get created, since one is the writer child)
- *	-t minutes	- specifies minutes to run.  If not specified,
- *			  default is to run forever until a SIGINT
- *			  is received.
- *	-f filesize	- initial filesize (defaults to FILESIZE)
- *	-S sparseoffset - when non-zero, causes a sparse area to
- *			  be left before the data, meaning that the
- *			  actual initial file size is sparseoffset +
- *			  filesize.  Useful for testing large files.
- *			  (default is 0).
- *	-r		- randomize number of pages map children check.
- *			  (random % MAXLOOPS).  If not specified, each
- *			  child checks MAXLOOPS pages.
- *	-o		- randomize offset of file to map. (default is 0)
- *	-m		- do random msync/fsyncs as well
- *	-l		- if set, the output file is not removed on
- *			  program exit.
- *	-d		- enable debug output
- *
- *  Compile with -DLARGE_FILE to enable file sizes > 2 GB.
- */
-
+#include <float.h>
+#include "tst_test.h"
+
+#if _FILE_OFFSET_BITS == 64
+# define FSIZE_MIN LONG_MIN
+# define FSIZE_MAX LONG_MAX
+#else
+# define FSIZE_MIN INT_MIN
+# define FSIZE_MAX INT_MAX
+#endif
 #define MAXLOOPS	500	/* max pages for map children to write */
-#define	FILESIZE	4096	/* initial filesize set up by parent */
+#define TEST_FILE	"mmapstress01.out"
 
 #ifdef roundup
 #undef roundup
 #endif
 #define roundup(x, y)	((((x)+((y)-1))/(y))*(y))
 
-extern time_t time(time_t *);
-extern char *ctime(const time_t *);
-extern void *malloc(size_t);
-extern long lrand48(void);
-extern void srand(unsigned);
-extern void srand48(long);
-extern int rand(void);
-extern int atoi(const char *);
-
-char *usage =
-    "-p nprocs [-t minutes -f filesize -S sparseoffset -r -o -m -l -d]";
-
-typedef unsigned char uchar_t;
-#define SIZE_MAX UINT_MAX
-
-unsigned int initrand(void);
-void finish(int sig);
-void child_mapper(char *file, unsigned procno, unsigned nprocs);
-int fileokay(char *file, uchar_t * expbuf);
-int finished = 0;
-int leavefile = 0;
-
-int debug = 0;
-#ifdef LARGE_FILE
-off64_t filesize = FILESIZE;
-off64_t sparseoffset = 0;
-#else /* LARGE_FILE */
-off_t filesize = FILESIZE;
-off_t sparseoffset = 0;
-#endif /* LARGE_FILE */
-unsigned randloops = 0;
-unsigned dosync = 0;
-unsigned do_offset = 0;
-unsigned pattern = 0;
-
-int main(int argc, char *argv[])
+static unsigned int initrand(void);
+static void sighandler(int);
+
+static char *debug;
+static char *do_sync;
+static char *do_offset;
+static char *opt_filesize;
+static char *opt_nprocs;
+static char *opt_pattern;
+static char *opt_sparseoffset;
+static char *randloops;
+
+static int fd;
+static volatile int finished;
+static int nprocs;
+static long long filesize = 4096;
+static long long sparseoffset;
+static size_t pagesize;
+static int pattern;
+
+static struct tst_option options[] = {
+	{"d", &debug, "Enable debug output"},
+	{"f:", &opt_filesize, "Initial filesize (default 4096)"},
+	{"m", &do_sync, "Do random msync/fsyncs as well"},
+	{"o", &do_offset, "Randomize the offset of file to map"},
+	{"p:", &opt_nprocs,
+	 "Number of mapping children to create (default 1 < ncpus < 20)"},
+	{"P:", &opt_pattern,
+	 "Use a fixed pattern (default random)"},
+	{"r", &randloops,
+	 "Randomize number of pages map children check (random % 500), "
+	 "otherwise each child checks 500 pages"},
+	{"S:", &opt_sparseoffset,
+	 "When non-zero, causes the sparse area to be left before the data, "
+	 "so that the actual initial filesize is sparseoffset + filesize "
+	 "(default 0)"},
+	{},
+};
+
+static void setup(void)
 {
-	char *progname;
-	int fd;
-	int c;
-	extern char *optarg;
-	unsigned nprocs = 0;
-	unsigned procno;
-	pid_t *pidarray = NULL;
-	pid_t pid;
-	uchar_t *buf = NULL;
-	unsigned int seed;
-	int pagesize = sysconf(_SC_PAGE_SIZE);
-	float alarmtime = 0;
 	struct sigaction sa;
-	unsigned i;
-	int write_cnt;
-	uchar_t data;
-	int no_prob = 0;
-	int wait_stat;
-	time_t t;
-#ifdef LARGE_FILE
-	off64_t bytes_left;
-#else /* LARGE_FILE */
-	off_t bytes_left;
-#endif /* LARGE_FILE */
-	const char *filename = "mmapstress01.out";
-
-	progname = *argv;
-	tst_tmpdir();
-	if (argc < 2) {
-		tst_brkm(TBROK, NULL, "usage: %s %s", progname, usage);
-	}
-
-	while ((c = getopt(argc, argv, "S:omdlrf:p:t:")) != -1) {
-		switch (c) {
-		case 'd':
-			debug = 1;
-			break;
-		case 't':
-			alarmtime = atof(optarg) * 60;
-			break;
-		case 'p':
-			nprocs = atoi(optarg);
-			break;
-		case 'l':
-			leavefile = 1;
-			break;
-		case 'f':
-#ifdef LARGE_FILE
-			filesize = atoll(optarg);
-#else /* LARGE_FILE */
-			filesize = atoi(optarg);
-#endif /* LARGE_FILE */
-			if (filesize < 0) {
-				(void)fprintf(stderr, "error: negative "
-					      "filesize\n");
-				anyfail();
-			}
-			break;
-		case 'r':
-			randloops = 1;
-			break;
-		case 'm':
-			dosync = 1;
-			break;
-		case 'o':
-			do_offset = 1;
-			break;
-		case 'S':
-#ifdef LARGE_FILE
-			sparseoffset = atoll(optarg);
-#else /* LARGE_FILE */
-			sparseoffset = atoi(optarg);
-#endif /* LARGE_FILE */
-			if (sparseoffset % pagesize != 0) {
-				fprintf(stderr,
-					"sparseoffset must be pagesize multiple\n");
-				anyfail();
-			}
-			break;
-		default:
-			(void)fprintf(stderr, "usage: %s %s\n", progname,
-				      usage);
-			tst_exit();
-		}
-	}
-
-	/* nprocs is >= 0 since it's unsigned */
-	if (nprocs > 255) {
-		(void)fprintf(stderr, "invalid nprocs %d - (range 0-255)\n",
-			      nprocs);
-		anyfail();
-	}
-
-	(void)time(&t);
-
-	seed = initrand();
-	pattern = seed & 0xff;
-
-	if (debug) {
-#ifdef LARGE_FILE
-		(void)printf("creating file <%s> with %Ld bytes, pattern %d\n",
-			     filename, filesize, pattern);
-#else /* LARGE_FILE */
-		(void)printf("creating file <%s> with %ld bytes, pattern %d\n",
-			     filename, filesize, pattern);
-#endif /* LARGE_FILE */
-		if (alarmtime)
-			(void)printf("running for %f minutes\n",
-				     alarmtime / 60);
-		else
-			(void)printf("running with no time limit\n");
-	}
 
-	/*
-	 *  Plan for death by signal.  User may have specified
-	 *  a time limit, in which set an alarm and catch SIGALRM.
-	 *  Also catch and cleanup with SIGINT.
-	 */
-	sa.sa_handler = finish;
+	sa.sa_handler = sighandler;
 	sa.sa_flags = 0;
-	if (sigemptyset(&sa.sa_mask)) {
-		perror("sigemptyset error");
-		goto cleanup;
-	}
-
-	if (sigaction(SIGINT, &sa, 0) == -1) {
-		perror("sigaction error SIGINT");
-		goto cleanup;
-	}
-	if (sigaction(SIGQUIT, &sa, 0) == -1) {
-		perror("sigaction error SIGQUIT");
-		goto cleanup;
-	}
-	if (sigaction(SIGTERM, &sa, 0) == -1) {
-		perror("sigaction error SIGTERM");
-		goto cleanup;
-	}
-
-	if (alarmtime) {
-		if (sigaction(SIGALRM, &sa, 0) == -1) {
-			perror("sigaction error");
-			goto cleanup;
-		}
-		(void)alarm(alarmtime);
-	}
-#ifdef LARGE_FILE
-	if ((fd = open64(filename, O_CREAT | O_TRUNC | O_RDWR, 0664)) == -1) {
-#else /* LARGE_FILE */
-	if ((fd = open(filename, O_CREAT | O_TRUNC | O_RDWR, 0664)) == -1) {
-#endif /* LARGE_FILE */
-		perror("open error");
-		anyfail();
-	}
-
-	if ((buf = malloc(pagesize)) == NULL
-	    || (pidarray = malloc(nprocs * sizeof(pid_t))) == NULL) {
-		perror("malloc error");
-		anyfail();
-	}
-
-	for (i = 0; i < nprocs; i++)
-		*(pidarray + i) = 0;
-
-	for (i = 0, data = 0; i < pagesize; i++) {
-		*(buf + i) = (data + pattern) & 0xff;
-		if (++data == nprocs)
-			data = 0;
-	}
-#ifdef LARGE_FILE
-	if (lseek64(fd, sparseoffset, SEEK_SET) < 0) {
-#else /* LARGE_FILE */
-	if (lseek(fd, sparseoffset, SEEK_SET) < 0) {
-#endif /* LARGE_FILE */
-		perror("lseek");
-		anyfail();
-	}
-	for (bytes_left = filesize; bytes_left; bytes_left -= c) {
-		write_cnt = MIN(pagesize, (int)bytes_left);
-		if ((c = write(fd, buf, write_cnt)) != write_cnt) {
-			if (c == -1) {
-				perror("write error");
-			} else {
-				(void)fprintf(stderr, "write: wrote %d of %d "
-					      "bytes\n", c, write_cnt);
-			}
-			(void)close(fd);
-			(void)unlink(filename);
-			anyfail();
-		}
-	}
-
-	(void)close(fd);
-
-	/*
-	 *  Fork off mmap children.
-	 */
-	for (procno = 0; procno < nprocs; procno++) {
-		switch (pid = fork()) {
-
-		case -1:
-			perror("fork error");
-			goto cleanup;
-
-		case 0:
-			child_mapper(filename, procno, nprocs);
-			exit(0);
-
-		default:
-			pidarray[procno] = pid;
-		}
-	}
-
-	/*
-	 *  Now wait for children and refork them as needed.
-	 */
-
-	while (!finished) {
-		pid = wait(&wait_stat);
-		/*
-		 *  Block signals while processing child exit.
-		 */
-
-		if (sighold(SIGALRM) || sighold(SIGINT)) {
-			perror("sighold error");
-			goto cleanup;
-		}
-
-		if (pid != -1) {
-			/*
-			 *  Check exit status, then refork with the
-			 *  appropriate procno.
-			 */
-			if (!WIFEXITED(wait_stat)
-			    || WEXITSTATUS(wait_stat) != 0) {
-				(void)fprintf(stderr, "child exit with err "
-					      "<x%x>\n", wait_stat);
-				goto cleanup;
-			}
-			for (i = 0; i < nprocs; i++)
-				if (pid == pidarray[i])
-					break;
-			if (i == nprocs) {
-				(void)fprintf(stderr, "unknown child pid %d, "
-					      "<x%x>\n", pid, wait_stat);
-				goto cleanup;
-			}
-
-			if ((pid = fork()) == -1) {
-				perror("fork error");
-				pidarray[i] = 0;
-				goto cleanup;
-			} else if (pid == 0) {	/* child */
-				child_mapper(filename, i, nprocs);
-				exit(0);
-			} else
-				pidarray[i] = pid;
-		} else {
-			/*
-			 *  wait returned an error.  If EINTR, then
-			 *  normal finish, else it's an unexpected
-			 *  error...
-			 */
-			if (errno != EINTR || !finished) {
-				perror("unexpected wait error");
-				goto cleanup;
-			}
-		}
-		if (sigrelse(SIGALRM) || sigrelse(SIGINT)) {
-			perror("sigrelse error");
-			goto cleanup;
-		}
-	}
-
-	/*
-	 *  Finished!  Check the file for sanity, then kill all
-	 *  the children and done!.
-	 */
-
-	if (sighold(SIGALRM)) {
-		perror("sighold error");
-		goto cleanup;
-	}
-	(void)alarm(0);
-	no_prob = 1;
-
-cleanup:
-	for (i = 0; i < nprocs; i++)
-		(void)kill(pidarray[i], SIGKILL);
-
-	while (wait(&wait_stat) != -1 || errno != ECHILD)
-		continue;
-
-	if (no_prob) {		/* only check file if no errors */
-		if (!fileokay(filename, buf)) {
-			(void)fprintf(stderr, "file data incorrect!\n");
-			(void)printf("  leaving file <%s>\n", filename);
-			/***** LTP Port *****/
-			local_flag = FAILED;
-			anyfail();
-			/*****	**	*****/
-		} else {
-			(void)printf("file data okay\n");
-			if (!leavefile)
-				(void)unlink(filename);
-		}
-	} else
-		(void)printf("  leaving file <%s>\n", filename);
+	SAFE_SIGEMPTYSET(&sa.sa_mask);
+	SAFE_SIGACTION(SIGINT, &sa, 0);
+	SAFE_SIGACTION(SIGQUIT, &sa, 0);
+	SAFE_SIGACTION(SIGTERM, &sa, 0);
+	SAFE_SIGACTION(SIGALRM, &sa, 0);
+
+	pagesize = sysconf(_SC_PAGE_SIZE);
+
+	if (tst_parse_filesize(opt_filesize, &filesize, 0, FSIZE_MAX))
+		tst_brk(TBROK, "invalid initial filesize '%s'", opt_filesize);
+
+	if (tst_parse_filesize(opt_sparseoffset, &sparseoffset, FSIZE_MIN, FSIZE_MAX))
+		tst_brk(TBROK, "invalid sparse offset '%s'", opt_sparseoffset);
+	if (sparseoffset % pagesize != 0)
+		tst_brk(TBROK, "sparseoffset must be pagesize multiple");
+
+	if (tst_parse_int(opt_nprocs, &nprocs, 0, 255))
+		tst_brk(TBROK, "invalid number of mapping children '%s'",
+			opt_nprocs);
+	if (!opt_nprocs)
+		nprocs = MAX(MIN(tst_ncpus() - 1L, 20L), 1L);
+
+	if (tst_parse_int(opt_pattern, &pattern, 0, 255))
+		tst_brk(TBROK, "invalid pattern '%s'", opt_pattern);
+	if (!opt_pattern)
+		pattern = initrand() & 0xff;
+
+	tst_res(TINFO, "creating file <%s> with %lld bytes, pattern %d",
+		TEST_FILE, filesize, pattern);
+}
 
-	(void)time(&t);
-	//(void)printf("%s: Finished %s", argv[0], ctime(&t)); LTP Port
-	ok_exit();
-	tst_exit();
+static void cleanup(void)
+{
+	if (fd > 0)
+		SAFE_CLOSE(fd);
 }
 
 /*
- *  Child process that reads/writes map.  The child stats the file
- *  to determine the size, maps the size of the file, then reads/writes
- *  its own locations on random pages of the map (its locations being
- *  determined based on nprocs & procno).  After a specific number of
- *  iterations, it exits.
+ * Child process that reads/writes map.  The child stats the file
+ * to determine the size, maps the size of the file, then reads/writes
+ * its own locations on random pages of the map (its locations being
+ * determined based on nprocs & procno).  After a specific number of
+ * iterations, it exits.
  */
-void child_mapper(char *file, unsigned procno, unsigned nprocs)
+static void child_mapper(char *file, unsigned int procno, unsigned int nprocs)
 {
-#ifdef LARGE_FILE
-	struct stat64 statbuf;
-	off64_t filesize;
-	off64_t offset;
-#else /* LARGE_FILE */
 	struct stat statbuf;
 	off_t filesize;
 	off_t offset;
-#endif /* LARGE_FILE */
 	size_t validsize;
 	size_t mapsize;
 	char *maddr = NULL, *paddr;
-	int fd;
-	size_t pagesize = sysconf(_SC_PAGE_SIZE);
-	unsigned randpage;
+	unsigned int randpage;
 	unsigned int seed;
-	unsigned loopcnt;
-	unsigned nloops;
-	unsigned mappages;
-	unsigned i;
-
-	seed = initrand();	/* initialize random seed */
-
-#ifdef LARGE_FILE
-	if (stat64(file, &statbuf) == -1) {
-#else /* LARGE_FILE */
-	if (stat(file, &statbuf) == -1) {
-#endif /* LARGE_FILE */
-		perror("stat error");
-		anyfail();
-	}
+	unsigned int loopcnt;
+	unsigned int nloops;
+	unsigned int mappages;
+	unsigned int i;
+
+	seed = initrand();
+
+	SAFE_STAT(file, &statbuf);
 	filesize = statbuf.st_size;
 
-#ifdef LARGE_FILE
-	if ((fd = open64(file, O_RDWR)) == -1) {
-#else /* LARGE_FILE */
-	if ((fd = open(file, O_RDWR)) == -1) {
-#endif /* LARGE_FILE */
-		perror("open error");
-		anyfail();
-	}
+	fd = SAFE_OPEN(file, O_RDWR);
 
-	if (statbuf.st_size - sparseoffset > SIZE_MAX) {
-		fprintf(stderr, "size_t overflow when setting up map\n");
-		anyfail();
-	}
+	if (statbuf.st_size - sparseoffset > UINT_MAX)
+		tst_brk(TBROK, "size_t overflow when setting up map");
 	mapsize = (size_t) (statbuf.st_size - sparseoffset);
 	mappages = roundup(mapsize, pagesize) / pagesize;
 	offset = sparseoffset;
 	if (do_offset) {
 		int pageoffset = lrand48() % mappages;
 		int byteoffset = pageoffset * pagesize;
+
 		offset += byteoffset;
 		mapsize -= byteoffset;
 		mappages -= pageoffset;
 	}
 	nloops = (randloops) ? (lrand48() % MAXLOOPS) : MAXLOOPS;
 
-	if (debug) {
-#ifdef LARGE_FILE
-		(void)printf("child %d (pid %ld): seed %d, fsize %Ld, "
-			     "mapsize %d, off %Ld, loop %d\n",
-			     procno, getpid(), seed, filesize, mapsize,
-			     offset / pagesize, nloops);
-#else /* LARGE_FILE */
-		(void)printf("child %d (pid %d): seed %d, fsize %ld, "
-			     "mapsize %ld, off %ld, loop %d\n",
-			     procno, getpid(), seed, filesize, (long)mapsize,
-			     offset / pagesize, nloops);
-#endif /* LARGE_FILE */
-	}
-#ifdef LARGE_FILE
-	if ((maddr = mmap64(0, mapsize, PROT_READ | PROT_WRITE, MAP_SHARED,
-			    fd, offset)) == (caddr_t) - 1) {
-#else /* LARGE_FILE */
-	if ((maddr = mmap(0, mapsize, PROT_READ | PROT_WRITE, MAP_SHARED,
-			  fd, offset)) == (caddr_t) - 1) {
-#endif /* LARGE_FILE */
-		perror("mmap error");
-		anyfail();
-	}
+	if (debug)
+		tst_res(TINFO, "child %d (pid %d): seed %d, fsize %lld, mapsize %ld, off %lld, loop %d",
+			procno, getpid(), seed, (long long)filesize,
+			(long)mapsize, (long long)offset / pagesize, nloops);
 
-	(void)close(fd);
+	maddr = SAFE_MMAP(0, mapsize, PROT_READ | PROT_WRITE, MAP_SHARED, fd,
+			  offset);
+	SAFE_CLOSE(fd);
 
-	/*
-	 *  Now loop read/writing random pages.
-	 */
 	for (loopcnt = 0; loopcnt < nloops; loopcnt++) {
 		randpage = lrand48() % mappages;
 		paddr = maddr + (randpage * pagesize);	/* page address */
@@ -554,185 +197,174 @@ void child_mapper(char *file, unsigned procno, unsigned nprocs)
 
 		for (i = procno; i < validsize; i += nprocs) {
 			if (*((unsigned char *)(paddr + i))
-			    != ((procno + pattern) & 0xff)) {
-				(void)fprintf(stderr, "child %d: invalid data "
-					      "<x%x>", procno,
-					      *((unsigned char *)(paddr + i)));
-				(void)fprintf(stderr, " at pg %d off %d, exp "
-					      "<x%x>\n", randpage, i,
-					      (procno + pattern) & 0xff);
-				anyfail();
-			}
+			    != ((procno + pattern) & 0xff))
+				tst_brk(TFAIL, "child %d: invalid data <x%x>\n"
+					" at pg %d off %d, exp <x%x>", procno,
+					*((unsigned char *)(paddr + i)),
+					randpage, i, (procno + pattern) & 0xff);
 
-			/*
-			 *  Now write it.
-			 */
 			*(paddr + i) = (procno + pattern) & 0xff;
 		}
 	}
-	if (dosync) {
-		/*
-		 * Exercise msync() as well!
-		 */
+	if (do_sync) {
 		randpage = lrand48() % mappages;
 		paddr = maddr + (randpage * pagesize);	/* page address */
 		if (msync(paddr, (mappages - randpage) * pagesize,
-			  MS_SYNC) == -1) {
-			anyfail();
-		}
-	}
-	if (munmap(maddr, mapsize) == -1) {
-		perror("munmap failed");
-		local_flag = FAILED;
-		anyfail();
+			  MS_SYNC) == -1)
+			tst_brk(TBROK | TERRNO, "msync failed");
 	}
+	SAFE_MUNMAP(maddr, mapsize);
 	exit(0);
 }
 
-/*
- *  Make sure file has all the correct data.
- */
-int fileokay(char *file, uchar_t * expbuf)
+/* Make sure file has all the correct data. */
+static void fileokay(char *file, unsigned char *expbuf)
 {
-#ifdef LARGE_FILE
-	struct stat64 statbuf;
-#else /* LARGE_FILE */
-	struct stat statbuf;
-#endif /* LARGE_FILE */
-	size_t mapsize;
-	unsigned mappages;
-	unsigned pagesize = sysconf(_SC_PAGE_SIZE);
-	uchar_t readbuf[pagesize];
-	int fd;
 	int cnt;
-	unsigned i, j;
-
-#ifdef LARGE_FILE
-	if ((fd = open64(file, O_RDONLY)) == -1) {
-#else /* LARGE_FILE */
-	if ((fd = open(file, O_RDONLY)) == -1) {
-#endif /* LARGE_FILE */
-		perror("open error");
-		/***** LTP Port *****/
-		local_flag = FAILED;
-		anyfail();
-		/*****	**	*****/
-		return 0;
-	}
-#ifdef LARGE_FILE
-	if (fstat64(fd, &statbuf) == -1) {
-#else /* LARGE_FILE */
-	if (fstat(fd, &statbuf) == -1) {
-#endif /* LARGE_FILE */
-		perror("stat error");
-		/***** LTP Port *****/
-		local_flag = FAILED;
-		anyfail();
-		/*****	**	*****/
-		return 0;
-	}
-#ifdef LARGE_FILE
-	if (lseek64(fd, sparseoffset, SEEK_SET) < 0) {
-#else /* LARGE_FILE */
-	if (lseek(fd, sparseoffset, SEEK_SET) < 0) {
-#endif /* LARGE_FILE */
-		perror("lseek");
-		anyfail();
-	}
+	size_t mapsize;
+	struct stat statbuf;
+	unsigned char readbuf[pagesize];
+	unsigned int i, j;
+	unsigned int mappages;
 
-	if (statbuf.st_size - sparseoffset > SIZE_MAX) {
-		fprintf(stderr, "size_t overflow when setting up map\n");
-		anyfail();
-	}
+	fd = SAFE_OPEN(file, O_RDONLY);
+
+	SAFE_FSTAT(fd, &statbuf);
+	SAFE_LSEEK(fd, sparseoffset, SEEK_SET);
+
+	if (statbuf.st_size - sparseoffset > UINT_MAX)
+		tst_brk(TBROK, "size_t overflow when setting up map");
 	mapsize = (size_t) (statbuf.st_size - sparseoffset);
 
 	mappages = roundup(mapsize, pagesize) / pagesize;
 
 	for (i = 0; i < mappages; i++) {
-		cnt = read(fd, readbuf, pagesize);
-		if (cnt == -1) {
-			perror("read error");
-			/***** LTP Port *****/
-			local_flag = FAILED;
-			anyfail();
-			/*****	**	*****/
-			return 0;
-		} else if (cnt != pagesize) {
-			/*
-			 *  Okay if at last page in file...
-			 */
-			if ((i * pagesize) + cnt != mapsize) {
-				(void)fprintf(stderr, "read %d of %ld bytes\n",
-					      (i * pagesize) + cnt,
-					      (long)mapsize);
-				close(fd);
-				return 0;
-			}
+		cnt = SAFE_READ(0, fd, readbuf, pagesize);
+		if ((unsigned int)cnt != pagesize) {
+			/* Okay if at last page in file... */
+			if ((i * pagesize) + cnt != mapsize)
+				tst_brk(TFAIL, "missing data: read %lu of %ld bytes",
+					(i * pagesize) + cnt, (long)mapsize);
 		}
-		/*
-		 *  Compare read bytes of data.
-		 */
-		for (j = 0; j < cnt; j++) {
-			if (expbuf[j] != readbuf[j]) {
-				(void)fprintf(stderr,
-					      "read bad data: exp %c got %c)",
-					      expbuf[j], readbuf[j]);
-#ifdef LARGE_FILE
-				(void)fprintf(stderr, ", pg %d off %d, "
-					      "(fsize %Ld)\n", i, j,
-					      statbuf.st_size);
-#else /* LARGE_FILE */
-				(void)fprintf(stderr, ", pg %d off %d, "
-					      "(fsize %ld)\n", i, j,
-					      statbuf.st_size);
-#endif /* LARGE_FILE */
-				close(fd);
-				return 0;
-			}
+		/* Compare read bytes of data. */
+		for (j = 0; j < (unsigned int)cnt; j++) {
+			if (expbuf[j] != readbuf[j])
+				tst_brk(TFAIL,
+					"read bad data: exp %c got %c, pg %d off %d, (fsize %lld)",
+					expbuf[j], readbuf[j], i, j,
+					(long long)statbuf.st_size);
 		}
 	}
-	close(fd);
-
-	return 1;
+	SAFE_CLOSE(fd);
 }
 
- /*ARGSUSED*/ void finish(int sig)
+static void sighandler(int sig LTP_ATTRIBUTE_UNUSED)
 {
 	finished++;
-	return;
 }
 
-unsigned int initrand(void)
+static unsigned int initrand(void)
 {
 	unsigned int seed;
 
 	/*
-	 *  Initialize random seed...  Got this from a test written
-	 *  by scooter:
-	 *      Use srand/rand to diffuse the information from the
-	 *      time and pid.  If you start several processes, then
-	 *      the time and pid information don't provide much
-	 *      variation.
+	 * Use srand/rand to diffuse the information from the
+	 * time and pid.  If you start several processes, then
+	 * the time and pid information don't provide much
+	 * variation.
 	 */
 	srand((unsigned int)getpid());
 	seed = rand();
 	srand((unsigned int)time(NULL));
 	seed = (seed ^ rand()) % 100000;
-	srand48((long int)seed);
-	return (seed);
+	srand48((long)seed);
+	return seed;
 }
 
-/*****  LTP Port        *****/
-void ok_exit(void)
+static void run(void)
 {
-	tst_resm(TPASS, "Test passed");
-	tst_rmdir();
-	tst_exit();
-}
+	int c;
+	int i;
+	int wait_stat;
+	off_t bytes_left;
+	pid_t pid;
+	pid_t *pidarray;
+	size_t write_cnt;
+	unsigned char data;
+	unsigned char *buf;
 
-int anyfail(void)
-{
-	tst_brkm(TFAIL, tst_rmdir, "Test failed");
+	alarm(tst_remaining_runtime());
+
+	finished = 0;
+	fd = SAFE_OPEN(TEST_FILE, O_CREAT | O_TRUNC | O_RDWR, 0664);
+	buf = SAFE_MALLOC(pagesize);
+	pidarray = SAFE_MALLOC(nprocs * sizeof(pid_t));
+
+	for (i = 0; i < nprocs; i++)
+		*(pidarray + i) = 0;
+
+	for (i = 0, data = 0; i < (int)pagesize; i++) {
+		*(buf + i) = (data + pattern) & 0xff;
+		if (++data == nprocs)
+			data = 0;
+	}
+	SAFE_LSEEK(fd, (off_t)sparseoffset, SEEK_SET);
+	for (bytes_left = filesize; bytes_left; bytes_left -= c) {
+		write_cnt = MIN((long long)pagesize, (long long)bytes_left);
+		c = SAFE_WRITE(1, fd, buf, write_cnt);
+	}
+	SAFE_CLOSE(fd);
+
+	for (i = 0; i < nprocs; i++) {
+		pid = SAFE_FORK();
+
+		if (pid == 0) {
+			child_mapper(TEST_FILE, (unsigned int)i, (unsigned int)nprocs);
+			exit(0);
+		} else {
+			pidarray[i] = pid;
+		}
+	}
+
+	while (!finished) {
+		pid = wait(&wait_stat);
+		if (pid != -1) {
+			if (!WIFEXITED(wait_stat)
+			    || WEXITSTATUS(wait_stat) != 0)
+				tst_brk(TBROK, "child exit with err <x%x>",
+					wait_stat);
+			for (i = 0; i < nprocs; i++)
+				if (pid == pidarray[i])
+					break;
+			if (i == nprocs)
+				tst_brk(TBROK, "unknown child pid %d, <x%x>",
+					pid, wait_stat);
+
+			pid = SAFE_FORK();
+			if (pid == 0) {
+				child_mapper(TEST_FILE, (unsigned int)i, (unsigned int)nprocs);
+				exit(0);
+			} else {
+				pidarray[i] = pid;
+			}
+		} else {
+			if (errno != EINTR || !finished)
+				tst_brk(TBROK | TERRNO,
+					"unexpected wait error");
+		}
+	}
+	alarm(0);
+
+	fileokay(TEST_FILE, buf);
+	tst_res(TPASS, "file has expected data");
 }
 
-/*****  **      **      *****/
+static struct tst_test test = {
+	.test_all = run,
+	.setup = setup,
+	.options = options,
+	.cleanup = cleanup,
+	.max_runtime = 12,
+	.needs_tmpdir = 1,
+	.forks_child = 1,
+};
Signature · 1 line
2.38.1.273.g43a17bfeac-goog
Signature · 5 lines
Thank you,
Richard.

-- 
Mailing list info: https://lists.linux.it/listinfo/ltp
#3 lore raw

Re: [LTP] [PATCH v7 1/1] mmapstress01: refactor to tst_test framework

Hello,

Quoted 14 lines · Richard Palethorpe

Hello,

Quoted 10 lines · Edward Liaw via ltp

Use ltp framework and apply make check corrections. Reorder functions and variables. Use safe macros.
Drop leavefile option.
Build tests with FILE_OFFSET_BITS=64 instead of doing LARGE_FILE checks to switch between 32 and 64 bit types and syscalls.
Define fsize bounds by file offset bits.
Move sighandler to setup and remove sig blocks.
Add option to specify pattern.
Set default nprocs to ncpus with min of 1 and max of 20.

Quoted 5 lines
Quoted 1 line

Will merge this today if the CI is happy and nobody comments.

Merged, thanks!

Quoted 1,009 lines
Quoted 1,009 lines
---
 testcases/kernel/mem/mmapstress/Makefile      |   2 +
 .../kernel/mem/mmapstress/mmapstress01.c      | 886 +++++-------------
 2 files changed, 261 insertions(+), 627 deletions(-)
testcases/kernel/mem/mmapstress/Makefile +2 -0
index 744f099d8..b30bd34b8 100644
@@ -5,3 +5,5 @@ top_srcdir              ?= ../../../..
 
 include $(top_srcdir)/include/mk/testcases.mk
 include $(top_srcdir)/include/mk/generic_leaf_target.mk
+
+mmapstress01: CFLAGS += -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE
testcases/kernel/mem/mmapstress/mmapstress01.c +259 -627
index f425c223d..ac1b77387 100644
@@ -1,23 +1,24 @@
-/* IBM Corporation */
-/* 01/02/2003	Port to LTP [email protected] */
-/* 06/30/2001	Port to Linux	[email protected] */
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
- *   Copyright (c) International Business Machines  Corp., 2003
- *
- *
- *   This program is free software;  you can redistribute it and/or modify
- *   it under the terms of the GNU General Public License as published by
- *   the Free Software Foundation; either version 2 of the License, or
- *   (at your option) any later version.
- *
- *   This program is distributed in the hope that it will be useful,
- *   but WITHOUT ANY WARRANTY;  without even the implied warranty of
- *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
- *   the GNU General Public License for more details.
+ * Copyright (c) International Business Machines  Corp., 2003
+ * 01/02/2003	Port to LTP [email protected]
+ * 06/30/2001	Port to Linux	[email protected]
+ * 10/03/2022	Refactor to LTP framework	[email protected]
+ */
+/*\
+ * [Description]
+ * This test stresses mmaps, without dealing with fragments or anything!
+ * It forks a specified number of children,
+ * all of whom mmap the same file, make a given number of accesses
+ * to random pages in the map (reading & writing and comparing data).
+ * Then the child exits and the parent forks another to take its place.
+ * Each time a child is forked, it stats the file and maps the full
+ * length of the file.
  *
- *   You should have received a copy of the GNU General Public License
- *   along with this program;  if not, write to the Free Software
- *   Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ * This program continues to run until it either receives a SIGINT,
+ * or times out (if a timeout value is specified).  When either of
+ * these things happens, it cleans up its kids, then checks the
+ * file to make sure it has the correct data.
  */
 
 #define _GNU_SOURCE 1
@@ -32,517 +33,159 @@
 #include <errno.h>
 #include <sys/types.h>
 #include <limits.h>
-/*****  LTP Port        *****/
-#include "test.h"
-#define FAILED 0
-#define PASSED 1
-
-int local_flag = PASSED;
-char *TCID = "mmapstress01";	//tmnoextend
-FILE *temp;
-int TST_TOTAL = 1;
-
-int anyfail();
-void ok_exit();
-/*****  **      **      *****/
-
-/*
- *  This test stresses mmaps, without dealing with fragments or anything!
- *  It forks a specified number of children,
- *  all of whom mmap the same file, make a given number of accesses
- *  to random pages in the map (reading & writing and comparing data).
- *  Then the child exits and the parent forks another to take its place.
- *  Each time a child is forked, it stats the file and maps the full
- *  length of the file.
- *
- *  This program continues to run until it either receives a SIGINT,
- *  or times out (if a timeout value is specified).  When either of
- *  these things happens, it cleans up its kids, then checks the
- *  file to make sure it has the correct data.
- *
- *  usage:
- *	tmnoextend -p nprocs [-t minutes -f filesize -S sparseoffset
- *			      -r -o -m -l -d]
- *  where:
- *	-p nprocs	- specifies the number of mapping children
- *			  to create.  (nprocs + 1 children actually
- *			  get created, since one is the writer child)
- *	-t minutes	- specifies minutes to run.  If not specified,
- *			  default is to run forever until a SIGINT
- *			  is received.
- *	-f filesize	- initial filesize (defaults to FILESIZE)
- *	-S sparseoffset - when non-zero, causes a sparse area to
- *			  be left before the data, meaning that the
- *			  actual initial file size is sparseoffset +
- *			  filesize.  Useful for testing large files.
- *			  (default is 0).
- *	-r		- randomize number of pages map children check.
- *			  (random % MAXLOOPS).  If not specified, each
- *			  child checks MAXLOOPS pages.
- *	-o		- randomize offset of file to map. (default is 0)
- *	-m		- do random msync/fsyncs as well
- *	-l		- if set, the output file is not removed on
- *			  program exit.
- *	-d		- enable debug output
- *
- *  Compile with -DLARGE_FILE to enable file sizes > 2 GB.
- */
-
+#include <float.h>
+#include "tst_test.h"
+
+#if _FILE_OFFSET_BITS == 64
+# define FSIZE_MIN LONG_MIN
+# define FSIZE_MAX LONG_MAX
+#else
+# define FSIZE_MIN INT_MIN
+# define FSIZE_MAX INT_MAX
+#endif
 #define MAXLOOPS	500	/* max pages for map children to write */
-#define	FILESIZE	4096	/* initial filesize set up by parent */
+#define TEST_FILE	"mmapstress01.out"
 
 #ifdef roundup
 #undef roundup
 #endif
 #define roundup(x, y)	((((x)+((y)-1))/(y))*(y))
 
-extern time_t time(time_t *);
-extern char *ctime(const time_t *);
-extern void *malloc(size_t);
-extern long lrand48(void);
-extern void srand(unsigned);
-extern void srand48(long);
-extern int rand(void);
-extern int atoi(const char *);
-
-char *usage =
-    "-p nprocs [-t minutes -f filesize -S sparseoffset -r -o -m -l -d]";
-
-typedef unsigned char uchar_t;
-#define SIZE_MAX UINT_MAX
-
-unsigned int initrand(void);
-void finish(int sig);
-void child_mapper(char *file, unsigned procno, unsigned nprocs);
-int fileokay(char *file, uchar_t * expbuf);
-int finished = 0;
-int leavefile = 0;
-
-int debug = 0;
-#ifdef LARGE_FILE
-off64_t filesize = FILESIZE;
-off64_t sparseoffset = 0;
-#else /* LARGE_FILE */
-off_t filesize = FILESIZE;
-off_t sparseoffset = 0;
-#endif /* LARGE_FILE */
-unsigned randloops = 0;
-unsigned dosync = 0;
-unsigned do_offset = 0;
-unsigned pattern = 0;
-
-int main(int argc, char *argv[])
+static unsigned int initrand(void);
+static void sighandler(int);
+
+static char *debug;
+static char *do_sync;
+static char *do_offset;
+static char *opt_filesize;
+static char *opt_nprocs;
+static char *opt_pattern;
+static char *opt_sparseoffset;
+static char *randloops;
+
+static int fd;
+static volatile int finished;
+static int nprocs;
+static long long filesize = 4096;
+static long long sparseoffset;
+static size_t pagesize;
+static int pattern;
+
+static struct tst_option options[] = {
+	{"d", &debug, "Enable debug output"},
+	{"f:", &opt_filesize, "Initial filesize (default 4096)"},
+	{"m", &do_sync, "Do random msync/fsyncs as well"},
+	{"o", &do_offset, "Randomize the offset of file to map"},
+	{"p:", &opt_nprocs,
+	 "Number of mapping children to create (default 1 < ncpus < 20)"},
+	{"P:", &opt_pattern,
+	 "Use a fixed pattern (default random)"},
+	{"r", &randloops,
+	 "Randomize number of pages map children check (random % 500), "
+	 "otherwise each child checks 500 pages"},
+	{"S:", &opt_sparseoffset,
+	 "When non-zero, causes the sparse area to be left before the data, "
+	 "so that the actual initial filesize is sparseoffset + filesize "
+	 "(default 0)"},
+	{},
+};
+
+static void setup(void)
 {
-	char *progname;
-	int fd;
-	int c;
-	extern char *optarg;
-	unsigned nprocs = 0;
-	unsigned procno;
-	pid_t *pidarray = NULL;
-	pid_t pid;
-	uchar_t *buf = NULL;
-	unsigned int seed;
-	int pagesize = sysconf(_SC_PAGE_SIZE);
-	float alarmtime = 0;
 	struct sigaction sa;
-	unsigned i;
-	int write_cnt;
-	uchar_t data;
-	int no_prob = 0;
-	int wait_stat;
-	time_t t;
-#ifdef LARGE_FILE
-	off64_t bytes_left;
-#else /* LARGE_FILE */
-	off_t bytes_left;
-#endif /* LARGE_FILE */
-	const char *filename = "mmapstress01.out";
-
-	progname = *argv;
-	tst_tmpdir();
-	if (argc < 2) {
-		tst_brkm(TBROK, NULL, "usage: %s %s", progname, usage);
-	}
-
-	while ((c = getopt(argc, argv, "S:omdlrf:p:t:")) != -1) {
-		switch (c) {
-		case 'd':
-			debug = 1;
-			break;
-		case 't':
-			alarmtime = atof(optarg) * 60;
-			break;
-		case 'p':
-			nprocs = atoi(optarg);
-			break;
-		case 'l':
-			leavefile = 1;
-			break;
-		case 'f':
-#ifdef LARGE_FILE
-			filesize = atoll(optarg);
-#else /* LARGE_FILE */
-			filesize = atoi(optarg);
-#endif /* LARGE_FILE */
-			if (filesize < 0) {
-				(void)fprintf(stderr, "error: negative "
-					      "filesize\n");
-				anyfail();
-			}
-			break;
-		case 'r':
-			randloops = 1;
-			break;
-		case 'm':
-			dosync = 1;
-			break;
-		case 'o':
-			do_offset = 1;
-			break;
-		case 'S':
-#ifdef LARGE_FILE
-			sparseoffset = atoll(optarg);
-#else /* LARGE_FILE */
-			sparseoffset = atoi(optarg);
-#endif /* LARGE_FILE */
-			if (sparseoffset % pagesize != 0) {
-				fprintf(stderr,
-					"sparseoffset must be pagesize multiple\n");
-				anyfail();
-			}
-			break;
-		default:
-			(void)fprintf(stderr, "usage: %s %s\n", progname,
-				      usage);
-			tst_exit();
-		}
-	}
-
-	/* nprocs is >= 0 since it's unsigned */
-	if (nprocs > 255) {
-		(void)fprintf(stderr, "invalid nprocs %d - (range 0-255)\n",
-			      nprocs);
-		anyfail();
-	}
-
-	(void)time(&t);
-
-	seed = initrand();
-	pattern = seed & 0xff;
-
-	if (debug) {
-#ifdef LARGE_FILE
-		(void)printf("creating file <%s> with %Ld bytes, pattern %d\n",
-			     filename, filesize, pattern);
-#else /* LARGE_FILE */
-		(void)printf("creating file <%s> with %ld bytes, pattern %d\n",
-			     filename, filesize, pattern);
-#endif /* LARGE_FILE */
-		if (alarmtime)
-			(void)printf("running for %f minutes\n",
-				     alarmtime / 60);
-		else
-			(void)printf("running with no time limit\n");
-	}
 
-	/*
-	 *  Plan for death by signal.  User may have specified
-	 *  a time limit, in which set an alarm and catch SIGALRM.
-	 *  Also catch and cleanup with SIGINT.
-	 */
-	sa.sa_handler = finish;
+	sa.sa_handler = sighandler;
 	sa.sa_flags = 0;
-	if (sigemptyset(&sa.sa_mask)) {
-		perror("sigemptyset error");
-		goto cleanup;
-	}
-
-	if (sigaction(SIGINT, &sa, 0) == -1) {
-		perror("sigaction error SIGINT");
-		goto cleanup;
-	}
-	if (sigaction(SIGQUIT, &sa, 0) == -1) {
-		perror("sigaction error SIGQUIT");
-		goto cleanup;
-	}
-	if (sigaction(SIGTERM, &sa, 0) == -1) {
-		perror("sigaction error SIGTERM");
-		goto cleanup;
-	}
-
-	if (alarmtime) {
-		if (sigaction(SIGALRM, &sa, 0) == -1) {
-			perror("sigaction error");
-			goto cleanup;
-		}
-		(void)alarm(alarmtime);
-	}
-#ifdef LARGE_FILE
-	if ((fd = open64(filename, O_CREAT | O_TRUNC | O_RDWR, 0664)) == -1) {
-#else /* LARGE_FILE */
-	if ((fd = open(filename, O_CREAT | O_TRUNC | O_RDWR, 0664)) == -1) {
-#endif /* LARGE_FILE */
-		perror("open error");
-		anyfail();
-	}
-
-	if ((buf = malloc(pagesize)) == NULL
-	    || (pidarray = malloc(nprocs * sizeof(pid_t))) == NULL) {
-		perror("malloc error");
-		anyfail();
-	}
-
-	for (i = 0; i < nprocs; i++)
-		*(pidarray + i) = 0;
-
-	for (i = 0, data = 0; i < pagesize; i++) {
-		*(buf + i) = (data + pattern) & 0xff;
-		if (++data == nprocs)
-			data = 0;
-	}
-#ifdef LARGE_FILE
-	if (lseek64(fd, sparseoffset, SEEK_SET) < 0) {
-#else /* LARGE_FILE */
-	if (lseek(fd, sparseoffset, SEEK_SET) < 0) {
-#endif /* LARGE_FILE */
-		perror("lseek");
-		anyfail();
-	}
-	for (bytes_left = filesize; bytes_left; bytes_left -= c) {
-		write_cnt = MIN(pagesize, (int)bytes_left);
-		if ((c = write(fd, buf, write_cnt)) != write_cnt) {
-			if (c == -1) {
-				perror("write error");
-			} else {
-				(void)fprintf(stderr, "write: wrote %d of %d "
-					      "bytes\n", c, write_cnt);
-			}
-			(void)close(fd);
-			(void)unlink(filename);
-			anyfail();
-		}
-	}
-
-	(void)close(fd);
-
-	/*
-	 *  Fork off mmap children.
-	 */
-	for (procno = 0; procno < nprocs; procno++) {
-		switch (pid = fork()) {
-
-		case -1:
-			perror("fork error");
-			goto cleanup;
-
-		case 0:
-			child_mapper(filename, procno, nprocs);
-			exit(0);
-
-		default:
-			pidarray[procno] = pid;
-		}
-	}
-
-	/*
-	 *  Now wait for children and refork them as needed.
-	 */
-
-	while (!finished) {
-		pid = wait(&wait_stat);
-		/*
-		 *  Block signals while processing child exit.
-		 */
-
-		if (sighold(SIGALRM) || sighold(SIGINT)) {
-			perror("sighold error");
-			goto cleanup;
-		}
-
-		if (pid != -1) {
-			/*
-			 *  Check exit status, then refork with the
-			 *  appropriate procno.
-			 */
-			if (!WIFEXITED(wait_stat)
-			    || WEXITSTATUS(wait_stat) != 0) {
-				(void)fprintf(stderr, "child exit with err "
-					      "<x%x>\n", wait_stat);
-				goto cleanup;
-			}
-			for (i = 0; i < nprocs; i++)
-				if (pid == pidarray[i])
-					break;
-			if (i == nprocs) {
-				(void)fprintf(stderr, "unknown child pid %d, "
-					      "<x%x>\n", pid, wait_stat);
-				goto cleanup;
-			}
-
-			if ((pid = fork()) == -1) {
-				perror("fork error");
-				pidarray[i] = 0;
-				goto cleanup;
-			} else if (pid == 0) {	/* child */
-				child_mapper(filename, i, nprocs);
-				exit(0);
-			} else
-				pidarray[i] = pid;
-		} else {
-			/*
-			 *  wait returned an error.  If EINTR, then
-			 *  normal finish, else it's an unexpected
-			 *  error...
-			 */
-			if (errno != EINTR || !finished) {
-				perror("unexpected wait error");
-				goto cleanup;
-			}
-		}
-		if (sigrelse(SIGALRM) || sigrelse(SIGINT)) {
-			perror("sigrelse error");
-			goto cleanup;
-		}
-	}
-
-	/*
-	 *  Finished!  Check the file for sanity, then kill all
-	 *  the children and done!.
-	 */
-
-	if (sighold(SIGALRM)) {
-		perror("sighold error");
-		goto cleanup;
-	}
-	(void)alarm(0);
-	no_prob = 1;
-
-cleanup:
-	for (i = 0; i < nprocs; i++)
-		(void)kill(pidarray[i], SIGKILL);
-
-	while (wait(&wait_stat) != -1 || errno != ECHILD)
-		continue;
-
-	if (no_prob) {		/* only check file if no errors */
-		if (!fileokay(filename, buf)) {
-			(void)fprintf(stderr, "file data incorrect!\n");
-			(void)printf("  leaving file <%s>\n", filename);
-			/***** LTP Port *****/
-			local_flag = FAILED;
-			anyfail();
-			/*****	**	*****/
-		} else {
-			(void)printf("file data okay\n");
-			if (!leavefile)
-				(void)unlink(filename);
-		}
-	} else
-		(void)printf("  leaving file <%s>\n", filename);
+	SAFE_SIGEMPTYSET(&sa.sa_mask);
+	SAFE_SIGACTION(SIGINT, &sa, 0);
+	SAFE_SIGACTION(SIGQUIT, &sa, 0);
+	SAFE_SIGACTION(SIGTERM, &sa, 0);
+	SAFE_SIGACTION(SIGALRM, &sa, 0);
+
+	pagesize = sysconf(_SC_PAGE_SIZE);
+
+	if (tst_parse_filesize(opt_filesize, &filesize, 0, FSIZE_MAX))
+		tst_brk(TBROK, "invalid initial filesize '%s'", opt_filesize);
+
+	if (tst_parse_filesize(opt_sparseoffset, &sparseoffset, FSIZE_MIN, FSIZE_MAX))
+		tst_brk(TBROK, "invalid sparse offset '%s'", opt_sparseoffset);
+	if (sparseoffset % pagesize != 0)
+		tst_brk(TBROK, "sparseoffset must be pagesize multiple");
+
+	if (tst_parse_int(opt_nprocs, &nprocs, 0, 255))
+		tst_brk(TBROK, "invalid number of mapping children '%s'",
+			opt_nprocs);
+	if (!opt_nprocs)
+		nprocs = MAX(MIN(tst_ncpus() - 1L, 20L), 1L);
+
+	if (tst_parse_int(opt_pattern, &pattern, 0, 255))
+		tst_brk(TBROK, "invalid pattern '%s'", opt_pattern);
+	if (!opt_pattern)
+		pattern = initrand() & 0xff;
+
+	tst_res(TINFO, "creating file <%s> with %lld bytes, pattern %d",
+		TEST_FILE, filesize, pattern);
+}
 
-	(void)time(&t);
-	//(void)printf("%s: Finished %s", argv[0], ctime(&t)); LTP Port
-	ok_exit();
-	tst_exit();
+static void cleanup(void)
+{
+	if (fd > 0)
+		SAFE_CLOSE(fd);
 }
 
 /*
- *  Child process that reads/writes map.  The child stats the file
- *  to determine the size, maps the size of the file, then reads/writes
- *  its own locations on random pages of the map (its locations being
- *  determined based on nprocs & procno).  After a specific number of
- *  iterations, it exits.
+ * Child process that reads/writes map.  The child stats the file
+ * to determine the size, maps the size of the file, then reads/writes
+ * its own locations on random pages of the map (its locations being
+ * determined based on nprocs & procno).  After a specific number of
+ * iterations, it exits.
  */
-void child_mapper(char *file, unsigned procno, unsigned nprocs)
+static void child_mapper(char *file, unsigned int procno, unsigned int nprocs)
 {
-#ifdef LARGE_FILE
-	struct stat64 statbuf;
-	off64_t filesize;
-	off64_t offset;
-#else /* LARGE_FILE */
 	struct stat statbuf;
 	off_t filesize;
 	off_t offset;
-#endif /* LARGE_FILE */
 	size_t validsize;
 	size_t mapsize;
 	char *maddr = NULL, *paddr;
-	int fd;
-	size_t pagesize = sysconf(_SC_PAGE_SIZE);
-	unsigned randpage;
+	unsigned int randpage;
 	unsigned int seed;
-	unsigned loopcnt;
-	unsigned nloops;
-	unsigned mappages;
-	unsigned i;
-
-	seed = initrand();	/* initialize random seed */
-
-#ifdef LARGE_FILE
-	if (stat64(file, &statbuf) == -1) {
-#else /* LARGE_FILE */
-	if (stat(file, &statbuf) == -1) {
-#endif /* LARGE_FILE */
-		perror("stat error");
-		anyfail();
-	}
+	unsigned int loopcnt;
+	unsigned int nloops;
+	unsigned int mappages;
+	unsigned int i;
+
+	seed = initrand();
+
+	SAFE_STAT(file, &statbuf);
 	filesize = statbuf.st_size;
 
-#ifdef LARGE_FILE
-	if ((fd = open64(file, O_RDWR)) == -1) {
-#else /* LARGE_FILE */
-	if ((fd = open(file, O_RDWR)) == -1) {
-#endif /* LARGE_FILE */
-		perror("open error");
-		anyfail();
-	}
+	fd = SAFE_OPEN(file, O_RDWR);
 
-	if (statbuf.st_size - sparseoffset > SIZE_MAX) {
-		fprintf(stderr, "size_t overflow when setting up map\n");
-		anyfail();
-	}
+	if (statbuf.st_size - sparseoffset > UINT_MAX)
+		tst_brk(TBROK, "size_t overflow when setting up map");
 	mapsize = (size_t) (statbuf.st_size - sparseoffset);
 	mappages = roundup(mapsize, pagesize) / pagesize;
 	offset = sparseoffset;
 	if (do_offset) {
 		int pageoffset = lrand48() % mappages;
 		int byteoffset = pageoffset * pagesize;
+
 		offset += byteoffset;
 		mapsize -= byteoffset;
 		mappages -= pageoffset;
 	}
 	nloops = (randloops) ? (lrand48() % MAXLOOPS) : MAXLOOPS;
 
-	if (debug) {
-#ifdef LARGE_FILE
-		(void)printf("child %d (pid %ld): seed %d, fsize %Ld, "
-			     "mapsize %d, off %Ld, loop %d\n",
-			     procno, getpid(), seed, filesize, mapsize,
-			     offset / pagesize, nloops);
-#else /* LARGE_FILE */
-		(void)printf("child %d (pid %d): seed %d, fsize %ld, "
-			     "mapsize %ld, off %ld, loop %d\n",
-			     procno, getpid(), seed, filesize, (long)mapsize,
-			     offset / pagesize, nloops);
-#endif /* LARGE_FILE */
-	}
-#ifdef LARGE_FILE
-	if ((maddr = mmap64(0, mapsize, PROT_READ | PROT_WRITE, MAP_SHARED,
-			    fd, offset)) == (caddr_t) - 1) {
-#else /* LARGE_FILE */
-	if ((maddr = mmap(0, mapsize, PROT_READ | PROT_WRITE, MAP_SHARED,
-			  fd, offset)) == (caddr_t) - 1) {
-#endif /* LARGE_FILE */
-		perror("mmap error");
-		anyfail();
-	}
+	if (debug)
+		tst_res(TINFO, "child %d (pid %d): seed %d, fsize %lld, mapsize %ld, off %lld, loop %d",
+			procno, getpid(), seed, (long long)filesize,
+			(long)mapsize, (long long)offset / pagesize, nloops);
 
-	(void)close(fd);
+	maddr = SAFE_MMAP(0, mapsize, PROT_READ | PROT_WRITE, MAP_SHARED, fd,
+			  offset);
+	SAFE_CLOSE(fd);
 
-	/*
-	 *  Now loop read/writing random pages.
-	 */
 	for (loopcnt = 0; loopcnt < nloops; loopcnt++) {
 		randpage = lrand48() % mappages;
 		paddr = maddr + (randpage * pagesize);	/* page address */
@@ -554,185 +197,174 @@ void child_mapper(char *file, unsigned procno, unsigned nprocs)
 
 		for (i = procno; i < validsize; i += nprocs) {
 			if (*((unsigned char *)(paddr + i))
-			    != ((procno + pattern) & 0xff)) {
-				(void)fprintf(stderr, "child %d: invalid data "
-					      "<x%x>", procno,
-					      *((unsigned char *)(paddr + i)));
-				(void)fprintf(stderr, " at pg %d off %d, exp "
-					      "<x%x>\n", randpage, i,
-					      (procno + pattern) & 0xff);
-				anyfail();
-			}
+			    != ((procno + pattern) & 0xff))
+				tst_brk(TFAIL, "child %d: invalid data <x%x>\n"
+					" at pg %d off %d, exp <x%x>", procno,
+					*((unsigned char *)(paddr + i)),
+					randpage, i, (procno + pattern) & 0xff);
 
-			/*
-			 *  Now write it.
-			 */
 			*(paddr + i) = (procno + pattern) & 0xff;
 		}
 	}
-	if (dosync) {
-		/*
-		 * Exercise msync() as well!
-		 */
+	if (do_sync) {
 		randpage = lrand48() % mappages;
 		paddr = maddr + (randpage * pagesize);	/* page address */
 		if (msync(paddr, (mappages - randpage) * pagesize,
-			  MS_SYNC) == -1) {
-			anyfail();
-		}
-	}
-	if (munmap(maddr, mapsize) == -1) {
-		perror("munmap failed");
-		local_flag = FAILED;
-		anyfail();
+			  MS_SYNC) == -1)
+			tst_brk(TBROK | TERRNO, "msync failed");
 	}
+	SAFE_MUNMAP(maddr, mapsize);
 	exit(0);
 }
 
-/*
- *  Make sure file has all the correct data.
- */
-int fileokay(char *file, uchar_t * expbuf)
+/* Make sure file has all the correct data. */
+static void fileokay(char *file, unsigned char *expbuf)
 {
-#ifdef LARGE_FILE
-	struct stat64 statbuf;
-#else /* LARGE_FILE */
-	struct stat statbuf;
-#endif /* LARGE_FILE */
-	size_t mapsize;
-	unsigned mappages;
-	unsigned pagesize = sysconf(_SC_PAGE_SIZE);
-	uchar_t readbuf[pagesize];
-	int fd;
 	int cnt;
-	unsigned i, j;
-
-#ifdef LARGE_FILE
-	if ((fd = open64(file, O_RDONLY)) == -1) {
-#else /* LARGE_FILE */
-	if ((fd = open(file, O_RDONLY)) == -1) {
-#endif /* LARGE_FILE */
-		perror("open error");
-		/***** LTP Port *****/
-		local_flag = FAILED;
-		anyfail();
-		/*****	**	*****/
-		return 0;
-	}
-#ifdef LARGE_FILE
-	if (fstat64(fd, &statbuf) == -1) {
-#else /* LARGE_FILE */
-	if (fstat(fd, &statbuf) == -1) {
-#endif /* LARGE_FILE */
-		perror("stat error");
-		/***** LTP Port *****/
-		local_flag = FAILED;
-		anyfail();
-		/*****	**	*****/
-		return 0;
-	}
-#ifdef LARGE_FILE
-	if (lseek64(fd, sparseoffset, SEEK_SET) < 0) {
-#else /* LARGE_FILE */
-	if (lseek(fd, sparseoffset, SEEK_SET) < 0) {
-#endif /* LARGE_FILE */
-		perror("lseek");
-		anyfail();
-	}
+	size_t mapsize;
+	struct stat statbuf;
+	unsigned char readbuf[pagesize];
+	unsigned int i, j;
+	unsigned int mappages;
 
-	if (statbuf.st_size - sparseoffset > SIZE_MAX) {
-		fprintf(stderr, "size_t overflow when setting up map\n");
-		anyfail();
-	}
+	fd = SAFE_OPEN(file, O_RDONLY);
+
+	SAFE_FSTAT(fd, &statbuf);
+	SAFE_LSEEK(fd, sparseoffset, SEEK_SET);
+
+	if (statbuf.st_size - sparseoffset > UINT_MAX)
+		tst_brk(TBROK, "size_t overflow when setting up map");
 	mapsize = (size_t) (statbuf.st_size - sparseoffset);
 
 	mappages = roundup(mapsize, pagesize) / pagesize;
 
 	for (i = 0; i < mappages; i++) {
-		cnt = read(fd, readbuf, pagesize);
-		if (cnt == -1) {
-			perror("read error");
-			/***** LTP Port *****/
-			local_flag = FAILED;
-			anyfail();
-			/*****	**	*****/
-			return 0;
-		} else if (cnt != pagesize) {
-			/*
-			 *  Okay if at last page in file...
-			 */
-			if ((i * pagesize) + cnt != mapsize) {
-				(void)fprintf(stderr, "read %d of %ld bytes\n",
-					      (i * pagesize) + cnt,
-					      (long)mapsize);
-				close(fd);
-				return 0;
-			}
+		cnt = SAFE_READ(0, fd, readbuf, pagesize);
+		if ((unsigned int)cnt != pagesize) {
+			/* Okay if at last page in file... */
+			if ((i * pagesize) + cnt != mapsize)
+				tst_brk(TFAIL, "missing data: read %lu of %ld bytes",
+					(i * pagesize) + cnt, (long)mapsize);
 		}
-		/*
-		 *  Compare read bytes of data.
-		 */
-		for (j = 0; j < cnt; j++) {
-			if (expbuf[j] != readbuf[j]) {
-				(void)fprintf(stderr,
-					      "read bad data: exp %c got %c)",
-					      expbuf[j], readbuf[j]);
-#ifdef LARGE_FILE
-				(void)fprintf(stderr, ", pg %d off %d, "
-					      "(fsize %Ld)\n", i, j,
-					      statbuf.st_size);
-#else /* LARGE_FILE */
-				(void)fprintf(stderr, ", pg %d off %d, "
-					      "(fsize %ld)\n", i, j,
-					      statbuf.st_size);
-#endif /* LARGE_FILE */
-				close(fd);
-				return 0;
-			}
+		/* Compare read bytes of data. */
+		for (j = 0; j < (unsigned int)cnt; j++) {
+			if (expbuf[j] != readbuf[j])
+				tst_brk(TFAIL,
+					"read bad data: exp %c got %c, pg %d off %d, (fsize %lld)",
+					expbuf[j], readbuf[j], i, j,
+					(long long)statbuf.st_size);
 		}
 	}
-	close(fd);
-
-	return 1;
+	SAFE_CLOSE(fd);
 }
 
- /*ARGSUSED*/ void finish(int sig)
+static void sighandler(int sig LTP_ATTRIBUTE_UNUSED)
 {
 	finished++;
-	return;
 }
 
-unsigned int initrand(void)
+static unsigned int initrand(void)
 {
 	unsigned int seed;
 
 	/*
-	 *  Initialize random seed...  Got this from a test written
-	 *  by scooter:
-	 *      Use srand/rand to diffuse the information from the
-	 *      time and pid.  If you start several processes, then
-	 *      the time and pid information don't provide much
-	 *      variation.
+	 * Use srand/rand to diffuse the information from the
+	 * time and pid.  If you start several processes, then
+	 * the time and pid information don't provide much
+	 * variation.
 	 */
 	srand((unsigned int)getpid());
 	seed = rand();
 	srand((unsigned int)time(NULL));
 	seed = (seed ^ rand()) % 100000;
-	srand48((long int)seed);
-	return (seed);
+	srand48((long)seed);
+	return seed;
 }
 
-/*****  LTP Port        *****/
-void ok_exit(void)
+static void run(void)
 {
-	tst_resm(TPASS, "Test passed");
-	tst_rmdir();
-	tst_exit();
-}
+	int c;
+	int i;
+	int wait_stat;
+	off_t bytes_left;
+	pid_t pid;
+	pid_t *pidarray;
+	size_t write_cnt;
+	unsigned char data;
+	unsigned char *buf;
 
-int anyfail(void)
-{
-	tst_brkm(TFAIL, tst_rmdir, "Test failed");
+	alarm(tst_remaining_runtime());
+
+	finished = 0;
+	fd = SAFE_OPEN(TEST_FILE, O_CREAT | O_TRUNC | O_RDWR, 0664);
+	buf = SAFE_MALLOC(pagesize);
+	pidarray = SAFE_MALLOC(nprocs * sizeof(pid_t));
+
+	for (i = 0; i < nprocs; i++)
+		*(pidarray + i) = 0;
+
+	for (i = 0, data = 0; i < (int)pagesize; i++) {
+		*(buf + i) = (data + pattern) & 0xff;
+		if (++data == nprocs)
+			data = 0;
+	}
+	SAFE_LSEEK(fd, (off_t)sparseoffset, SEEK_SET);
+	for (bytes_left = filesize; bytes_left; bytes_left -= c) {
+		write_cnt = MIN((long long)pagesize, (long long)bytes_left);
+		c = SAFE_WRITE(1, fd, buf, write_cnt);
+	}
+	SAFE_CLOSE(fd);
+
+	for (i = 0; i < nprocs; i++) {
+		pid = SAFE_FORK();
+
+		if (pid == 0) {
+			child_mapper(TEST_FILE, (unsigned int)i, (unsigned int)nprocs);
+			exit(0);
+		} else {
+			pidarray[i] = pid;
+		}
+	}
+
+	while (!finished) {
+		pid = wait(&wait_stat);
+		if (pid != -1) {
+			if (!WIFEXITED(wait_stat)
+			    || WEXITSTATUS(wait_stat) != 0)
+				tst_brk(TBROK, "child exit with err <x%x>",
+					wait_stat);
+			for (i = 0; i < nprocs; i++)
+				if (pid == pidarray[i])
+					break;
+			if (i == nprocs)
+				tst_brk(TBROK, "unknown child pid %d, <x%x>",
+					pid, wait_stat);
+
+			pid = SAFE_FORK();
+			if (pid == 0) {
+				child_mapper(TEST_FILE, (unsigned int)i, (unsigned int)nprocs);
+				exit(0);
+			} else {
+				pidarray[i] = pid;
+			}
+		} else {
+			if (errno != EINTR || !finished)
+				tst_brk(TBROK | TERRNO,
+					"unexpected wait error");
+		}
+	}
+	alarm(0);
+
+	fileokay(TEST_FILE, buf);
+	tst_res(TPASS, "file has expected data");
 }
 
-/*****  **      **      *****/
+static struct tst_test test = {
+	.test_all = run,
+	.setup = setup,
+	.options = options,
+	.cleanup = cleanup,
+	.max_runtime = 12,
+	.needs_tmpdir = 1,
+	.forks_child = 1,
+};
Signature · 1 line
2.38.1.273.g43a17bfeac-goog
Signature · 5 lines
Thank you,
Richard.

-- 
Mailing list info: https://lists.linux.it/listinfo/ltp
#4 lore raw

Re: [LTP] [PATCH v7 1/1] mmapstress01: refactor to tst_test framework

Hi Edward, Richard, all,

Quoted 18 lines

Hello,

Quoted 13 lines · Richard Palethorpe

Hello,

Quoted 9 lines · Edward Liaw via ltp

Use ltp framework and apply make check corrections. Reorder functions and variables. Use safe macros.
Drop leavefile option.
Build tests with FILE_OFFSET_BITS=64 instead of doing LARGE_FILE checks to switch between 32 and 64 bit types and syscalls.
Define fsize bounds by file offset bits.
Move sighandler to setup and remove sig blocks.
Add option to specify pattern.
Set default nprocs to ncpus with min of 1 and max of 20.

Quoted 7 lines
Quoted 5 lines
Quoted 1 line

Will merge this today if the CI is happy and nobody comments.

Merged, thanks!

Thanks for your work! FYI 2 tiny problems sneaked in, see below.

runtest/mm contained -t 0.20 option, which caused failure. Fixed in:
https://github.com/linux-test-project/ltp/commit/36321277a294c0467219f650fd76aa1a8d310c1d

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
---
 testcases/kernel/mem/mmapstress/Makefile      |   2 +

...

Quoted 10 lines
Quoted 10 lines
Quoted 10 lines
testcases/kernel/mem/mmapstress/mmapstress01.c +10 -0
+static struct tst_option options[] = {
+	{"d", &debug, "Enable debug output"},
+	{"f:", &opt_filesize, "Initial filesize (default 4096)"},
+	{"m", &do_sync, "Do random msync/fsyncs as well"},
+	{"o", &do_offset, "Randomize the offset of file to map"},
+	{"p:", &opt_nprocs,
+	 "Number of mapping children to create (default 1 < ncpus < 20)"},
+	{"P:", &opt_pattern,
+	 "Use a fixed pattern (default random)"},
+	{"r", &randloops,
Quoted 8 lines
Quoted 8 lines

testcases/kernel/mem/mmapstress/mmapstress01.c line 91

Quoted 8 lines
testcases/kernel/mem/mmapstress/mmapstress01.c +8 -0
+	 "Randomize number of pages map children check (random % 500), "
+	 "otherwise each child checks 500 pages"},
+	{"S:", &opt_sparseoffset,
+	 "When non-zero, causes the sparse area to be left before the data, "
+	 "so that the actual initial filesize is sparseoffset + filesize "
+	 "(default 0)"},
+	{},
+};

Using options as non-inline leads to our docparse documentation having the name of the variable (options) i this case instead of listing options. Fixed in
https://github.com/linux-test-project/ltp/commit/72de038ff54496c5ced6ddc2d76713376aababb1

@Metan: I wonder if this can be fixed in docparser.
@Richie: If not, it would be nice to have check for it (I'll add issue with "check" label).

@Edward FYI to build doc:
cd metadata && make # open ../docparse/metadata.html

Here is stable version:
http://linux-test-project.github.io/metadata/metadata.stable.html

I plan to write hook to put version for master branch, being updated after each commit.

Kind regards,
Petr

Signature · 1 line
Mailing list info: https://lists.linux.it/listinfo/ltp
#5 lore raw

Re: [LTP] [PATCH v7 1/1] mmapstress01: refactor to tst_test framework

Hi all,

Quoted 4 lines

Thanks for your work! FYI 2 tiny problems sneaked in, see below.

runtest/mm contained -t 0.20 option, which caused failure. Fixed in:
https://github.com/linux-test-project/ltp/commit/36321277a294c0467219f650fd76aa1a8d310c1d

@Richie This would be even more important to check automatically. If you're able to in sparse list test parameters and whether they expect value or are standalone, adding process to grep in runtest files should not be hard. WDYT?

Kind regards,
Petr

Signature · 1 line
Mailing list info: https://lists.linux.it/listinfo/ltp
#6 lore raw

Re: [LTP] [PATCH v7 1/1] mmapstress01: refactor to tst_test framework

Hello,

Quoted 10 lines · Petr Vorel

Hi all,

Quoted 4 lines

Thanks for your work! FYI 2 tiny problems sneaked in, see below.

runtest/mm contained -t 0.20 option, which caused failure. Fixed in:
https://github.com/linux-test-project/ltp/commit/36321277a294c0467219f650fd76aa1a8d310c1d

@Richie This would be even more important to check automatically. If you're able to in sparse list test parameters and whether they expect value or are standalone, adding process to grep in runtest files should not be hard. WDYT?

Again this is producing meta data with Sparse. I guess it would also be AST level (i.e. not linearized IR byte code) which Sparse is not that great at.

Probably this would not be hard to do with a reasonable SA framework.

It is a good idea though, I'm just grumpy about the implementation.

Quoted 3 lines

Kind regards,
Petr

Signature · 5 lines
Thank you,
Richard.

-- 
Mailing list info: https://lists.linux.it/listinfo/ltp
#7 lore raw

Re: [LTP] [PATCH v7 1/1] mmapstress01: refactor to tst_test framework

In reply to Petr Vorel

Hello,

Quoted 59 lines · Petr Vorel

Hi Edward, Richard, all,

Quoted 18 lines

Hello,

Quoted 13 lines · Richard Palethorpe

Hello,

Quoted 9 lines · Edward Liaw via ltp

Use ltp framework and apply make check corrections. Reorder functions and variables. Use safe macros.
Drop leavefile option.
Build tests with FILE_OFFSET_BITS=64 instead of doing LARGE_FILE checks to switch between 32 and 64 bit types and syscalls.
Define fsize bounds by file offset bits.
Move sighandler to setup and remove sig blocks.
Add option to specify pattern.
Set default nprocs to ncpus with min of 1 and max of 20.

Quoted 7 lines
Quoted 5 lines
Quoted 1 line

Will merge this today if the CI is happy and nobody comments.

Merged, thanks!

Thanks for your work! FYI 2 tiny problems sneaked in, see below.

runtest/mm contained -t 0.20 option, which caused failure. Fixed in:
https://github.com/linux-test-project/ltp/commit/36321277a294c0467219f650fd76aa1a8d310c1d

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
---
 testcases/kernel/mem/mmapstress/Makefile      |   2 +

...

Quoted 10 lines
Quoted 10 lines
Quoted 10 lines
testcases/kernel/mem/mmapstress/mmapstress01.c +10 -0
+static struct tst_option options[] = {
+	{"d", &debug, "Enable debug output"},
+	{"f:", &opt_filesize, "Initial filesize (default 4096)"},
+	{"m", &do_sync, "Do random msync/fsyncs as well"},
+	{"o", &do_offset, "Randomize the offset of file to map"},
+	{"p:", &opt_nprocs,
+	 "Number of mapping children to create (default 1 < ncpus < 20)"},
+	{"P:", &opt_pattern,
+	 "Use a fixed pattern (default random)"},
+	{"r", &randloops,
Quoted 8 lines
Quoted 8 lines

testcases/kernel/mem/mmapstress/mmapstress01.c line 91

Quoted 8 lines
testcases/kernel/mem/mmapstress/mmapstress01.c +8 -0
+	 "Randomize number of pages map children check (random % 500), "
+	 "otherwise each child checks 500 pages"},
+	{"S:", &opt_sparseoffset,
+	 "When non-zero, causes the sparse area to be left before the data, "
+	 "so that the actual initial filesize is sparseoffset + filesize "
+	 "(default 0)"},
+	{},
+};

Using options as non-inline leads to our docparse documentation having the name of the variable (options) i this case instead of listing options. Fixed in
https://github.com/linux-test-project/ltp/commit/72de038ff54496c5ced6ddc2d76713376aababb1

Quoted 3 lines

@Metan: I wonder if this can be fixed in docparser.
@Richie: If not, it would be nice to have check for it (I'll add issue with "check" label).

Yeah, the checker could also produce the metadata. I'm not sure I want to start down that path though. This is an AST level operation which Sparse is pretty bad at.

I think both tools have serious issues. Perhaps using tree-sitter or even Arocc would be far more profitable.

Quoted 12 lines

@Edward FYI to build doc:
cd metadata && make # open ../docparse/metadata.html

Here is stable version:
http://linux-test-project.github.io/metadata/metadata.stable.html

I plan to write hook to put version for master branch, being updated after each commit.

Kind regards,
Petr

Signature · 5 lines
Thank you,
Richard.

-- 
Mailing list info: https://lists.linux.it/listinfo/ltp
#8 lore raw

Re: [LTP] [PATCH v7 1/1] mmapstress01: refactor to tst_test framework

In reply to Petr Vorel

Hi!

Quoted 1 line

@Metan: I wonder if this can be fixed in docparser.

For the time being I would rather keep the structures inline in the tst_test.

Fixing this in the dumb parser would be doable, but quite an effort. We would have to start tracking global variables the same way we track macros.

Quoted 2 lines

@Richie: If not, it would be nice to have check for it (I'll add issue with "check" label).

And rewrite to any other system would be even bigger effort. Sounds like a hackweek project if anyone is interested.

Signature · 5 lines
Cyril Hrubis
[email protected]

-- 
Mailing list info: https://lists.linux.it/listinfo/ltp
#9 lore raw

Re: [LTP] [PATCH v7 1/1] mmapstress01: refactor to tst_test framework

Hi Cyril, all,

Quoted 5 lines

Hi!

Quoted 1 line

@Metan: I wonder if this can be fixed in docparser.

For the time being I would rather keep the structures inline in the tst_test.

Good to know.

Quoted 9 lines

Fixing this in the dumb parser would be doable, but quite an effort. We would have to start tracking global variables the same way we track macros.

Quoted 2 lines

@Richie: If not, it would be nice to have check for it (I'll add issue with "check" label).

And rewrite to any other system would be even bigger effort. Sounds like a hackweek project if anyone is interested.

Understand if nobody (even Richie) wants to put any effort into automatic check. I certainly don't. I'll send a patch where I document the need to put inline in the tst_test (sending patch mainly due my bad English).

Kind regards,
Petr

Signature · 1 line
Mailing list info: https://lists.linux.it/listinfo/ltp