meta-arago-distro: drop support for handling source IPKs in SDK
PATCH 1/1 meta-arago-distro: drop support for handling source IPKs in SDK
From: Denys Dmytriyenko <[email protected]>
As support for top-level Makefile in SDK is being dropped, there's no need to generate source IPK packages to include sources in the SDK for cross-compiling. Generation of source IPKs is a bit kludgy as it's not supported upstream or by opkg, hence it often gets in the way of migrating the layer to the new release. Therefore, remove sourceipk.bbclass, arago-source-ipk.inc package configs and corresponding packagegroup-*-sdk-host.bb that pulled src packages to the SDK.
Signed-off-by Denys Dmytriyenko <[email protected]>
--- meta-arago-distro/classes/sourceipk.bbclass | 305 --------------- meta-arago-distro/conf/distro/arago.conf | 3 - .../conf/distro/include/arago-source-ipk.inc | 368 ------------------ .../recipes-core/images/tisdk-core-bundle.inc | 10 +- ...ackagegroup-arago-tisdk-addons-sdk-host.bb | 104 ----- ...packagegroup-arago-tisdk-amsdk-sdk-host.bb | 14 +- ...ackagegroup-arago-tisdk-crypto-sdk-host.bb | 18 - ...kagegroup-arago-tisdk-graphics-sdk-host.bb | 14 - .../packagegroup-arago-tisdk-hmi-sdk-host.bb | 37 -- ...ackagegroup-arago-tisdk-matrix-sdk-host.bb | 17 - ...gegroup-arago-tisdk-multimedia-sdk-host.bb | 41 -- ...ackagegroup-arago-tisdk-opencl-sdk-host.bb | 22 -- .../packagegroup-arago-tisdk-qte-sdk-host.bb | 11 - .../recipes-kernel/linux/copy-defconfig.inc | 22 -- .../linux/linux-ti-staging-rt_%.bbappend | 1 - .../linux/linux-ti-staging-systest_%.bbappend | 1 - .../linux/linux-ti-staging_%.bbappend | 1 - 17 files changed, 2 insertions(+), 987 deletions(-) delete mode 100644 meta-arago-distro/classes/sourceipk.bbclass delete mode 100644 meta-arago-distro/conf/distro/include/arago-source-ipk.inc delete mode 100644 meta-arago-distro/recipes-core/packagegroups/packagegroup-arago-tisdk-addons-sdk-host.bb delete mode 100644 meta-arago-distro/recipes-core/packagegroups/packagegroup-arago-tisdk-crypto-sdk-host.bb delete mode 100644 meta-arago-distro/recipes-core/packagegroups/packagegroup-arago-tisdk-graphics-sdk-host.bb delete mode 100644 meta-arago-distro/recipes-core/packagegroups/packagegroup-arago-tisdk-hmi-sdk-host.bb delete mode 100644 meta-arago-distro/recipes-core/packagegroups/packagegroup-arago-tisdk-matrix-sdk-host.bb delete mode 100644 meta-arago-distro/recipes-core/packagegroups/packagegroup-arago-tisdk-multimedia-sdk-host.bb delete mode 100644 meta-arago-distro/recipes-core/packagegroups/packagegroup-arago-tisdk-opencl-sdk-host.bb delete mode 100644 meta-arago-distro/recipes-core/packagegroups/packagegroup-arago-tisdk-qte-sdk-host.bb delete mode 100644 meta-arago-distro/recipes-kernel/linux/copy-defconfig.inc
meta-arago-distro/classes/sourceipk.bbclass deleted +0 -305
@@ -1,305 +0,0 @@ -# sourceipk.bbclass enables the creation of an ipk file that contains the -# sources used during the build. The sources contained in the ipk are the -# patched sources before configuration has been done. -# -# This class is used to provide an easy method to ship the corresponding -# sources for a package to end users so that they can install them on their -# host or target systems. -# -# This package uses the following variables to control its operations: -# - CREATE_SRCIPK = When set to 1 this variable indicates that -# a source ipk should be generated for the package. -# - SRCIPK_INSTALL_DIR = This variable indicates the directory to install -# the sources into. -# - SRCIPK_PACKAGE_ARCH = This variable allows specific recipies to -# specify an architecture for the sourcetree -# package, defaults to the same as binary pkg -# - SRCIPK_INC_EXTRAFILES = When set to 1 this variable indicates that -# the source ipk should contain extra files -# such as the README file and recipe. -# -# The default installation directory for the sources is: -# /usr/src/${PN}-source -# -# By setting the SRCIPK_INSTALL_DIR this default can be changed to any -# location desired. When combined with the opkg -o option this allows for the -# system building to specify a relative package install location to the -# install root given to opkg. Each source ipk can have a different directory. -# -# Creation of the source ipk can be controlled per package by setting -# CREATE_SRCIPK = "1" in the package recipe or by setting -# CREATE_SRCIPK:pn-<package name> = "1" in your local.conf -# -#TODO: -# Need to figure out how to use opkg-build in this class. -# I tried adding it as a dependency for the do_create_srcipk -# task using: -# do_create_srcipk[depends] += "opkg-utils-native:do_populate_sysroot" -# But then there is a circular dependency between sourcipk.bbclass and -# opkg-utils-native. Until I can figure out how to resolve this -# circular dependency I am extracting the needed pieces from opkg-build -# into this class and building the source ipk myself. - - -# Default is to not create the source ipk -CREATE_SRCIPK ?= "0" - -# Default installation prefix -SRCIPK_INSTALL_DIR ?= "/usr/src/${PN}-source" - -# Directory to preserve sources until they can be installed for packaging -SRCIPK_STAGING_DIR = "${WORKDIR}/srcipk-staging" - -# Specify the directory of the sources -SRCIPK_SRC_DIR ?= "${S}" - -# Default PACKAGE_ARCH for sources is "all" -SRCIPK_PACKAGE_ARCH ?= "${PACKAGE_ARCH}" - -# Default section matches the recipe section -SRCIPK_SECTION ?= "${SECTION}" - -# Default SRCIPK_INCLUDE_EXTRAFILES is to include the extra files -SRCIPK_INCLUDE_EXTRAFILES ?= "1" - -SRCIPK_PRESERVE_GIT ?= "false" - -# Git commit message that explains the purpose of the custom git branch -SRCIPK_CUSTOM_GIT_MESSAGE ?= "" - -# File that will store the same information as the commit message but is also -# used to add something to insure a commit can be committed. -SRCIPK_SDK_README ?= "TISDK-README" - -# Name used when creating the custom branch -SRCIPK_CUSTOM_GIT_BRANCH ?= "" - -# Create a shallow clone of the git repository to reduce the size of -# the sourceipk -SRCIPK_SHALLOW_CLONE ?= "false" - -# By default limit the history to 1 commit since the user can always -# use git pull --unshallow to fetch the rest of history. The depth -# level of 1 is set to keep from tracking through all merges and -# pulling excess history -SRCIPK_SHALLOW_DEPTH ?= "1" - -# This function will return the fetch URL for a git repository passed as -# the first parameter. -get_remote() { - git_repo="$1" - - if [ "$git_repo" = "" ] - then - echo "git_repo not passed to get_remote" - exit 1 - fi - - cd $git_repo - - # Get the remote repository fetch URL - remote=`git remote -v | grep "(fetch)" | cut -d ' ' -f 1 | cut -c 7- | tr -d ' '` - - # Since the echo'ed value of this statment is the returned value redirect - # the output of this command to /dev/null - cd - > /dev/null - - # echo back the remote repository URL as the output of this function - echo $remote - - return 0 -} - -# Some git repositories are very large and we do not want to ship the -# full history. Instead we want to limit history to reduce the size while -# still keeping the git repository in place. The full history can be -# fetched using git pull --unshallow or just git pull -# NOTE: This function depends on a git version >= 1.7.10. It will work -# with older versions but the size will be larger because rather -# than just a single branch the limited history will be a depth of -# 1 for all branches and tags. -limit_git_history() { - - # Temporary directory to make shallow clones in - gitshallowclone="${WORKDIR}/temp-git-shallow-clone" - - # Change directory to the git repository to be safe - cd ${SRCIPK_STAGING_DIR}/${SRCIPK_INSTALL_DIR} - - # Create a temporary directory to hold the shallow git clone - mkdir -p $gitshallowclone - - remote=`get_remote $PWD` - - # Clone a shallow version of the workdir repo so that the preserved git - # points to the commit used in the build. - git clone --depth ${SRCIPK_SHALLOW_DEPTH} --branch ${BRANCH} file://$PWD/.git $gitshallowclone - - # remove original kernel clone since we will replace it with the shallow - # clone - rm -rf ${SRCIPK_STAGING_DIR}/${SRCIPK_INSTALL_DIR}/.git - - # replace the original kernel git data with the shallow clone git data - mv $gitshallowclone/.git ${SRCIPK_STAGING_DIR}/${SRCIPK_INSTALL_DIR}/ - rm -rf $gitshallowclone - - # Remove the local remote - git remote rm origin - - # This is forceful, but unfortuantely, removing the origin remote does not - # remove all origin refs, and that causes problems. - rm -rf ./.git/refs/remotes/origin - - # Point remote back to upstream - git remote add origin $remote - - cd - -} - -adjust_git() { - orig_dir="$PWD" - - cd ${SRCIPK_STAGING_DIR}/${SRCIPK_INSTALL_DIR} - - if [ -d ".git" ] - then - if [ "${SRCIPK_PRESERVE_GIT}" = "true" ] - then - # If SRCIPK_SHALLOW_CLONE is true then make a shallow copy of the - # git repository and then fix up the git URLs - if [ "${SRCIPK_SHALLOW_CLONE}" = "true" ] - then - limit_git_history - fi - - # Repackage the repository so its a proper clone of the original - # (remote) git repository - git repack -a -d - - if [ "${SRCIPK_CUSTOM_GIT_BRANCH}" != "" -a "${SRCIPK_CUSTOM_GIT_MESSAGE}" != "" ] - then - # Create local git config settings to create commit - git config user.email "<>" - git config user.name "Texas Instruments SDK Builder" - - # For recipes like the kernel which may end up running - # sourceipk more than once. - branch_exist=`git branch | grep ${SRCIPK_CUSTOM_GIT_BRANCH}` || echo "" - if [ "$branch_exist" != "" -a -f ${SRCIPK_SDK_README} ] - then - git add -A - git commit --amend - else - echo -e ${SRCIPK_CUSTOM_GIT_MESSAGE} > ${SRCIPK_SDK_README} - git add -A - git commit -F ${SRCIPK_SDK_README} - git checkout -b "${SRCIPK_CUSTOM_GIT_BRANCH}" - fi - - # Delete local git config settings previously set - git config --unset user.email - git config --unset user.name - - fi - - rm -f .git/objects/info/alternates - - else - rm -rf .git - fi - - fi - - cd $orig_dir -} - -# Create a README file that describes the contents of the source ipk -sourceipk_create_readme() { - readme="$1/README.${PN}-source" - touch $readme - echo 'This package contains the patched sources for ${PN} that' >> $readme - echo 'were used to generate the ${PN} binary ipk package(s).' >> $readme - echo 'This package does not build or generate the binaries' >> $readme - echo 'directly. To build the binaries you must either' >> $readme - echo 'configure and build the sources yourself or use:' >> $readme - echo ' bitbake ${PN}' >> $readme - echo '' >> $readme - echo 'NOTE: The patches applied to the sources can be found in' >> $readme - echo " the \"patches\" directory" >> $readme -} - -do_create_srcipk[dirs] = "${SRCIPK_SRC_DIR} ${SRCIPK_STAGING_DIR}" -do_create_srcipk[cleandirs] = "${SRCIPK_STAGING_DIR}" -do_create_srcipk[umask] = "022" - -# Create the source ipk file. The ipk is manually created here instead -# of using the normal ipk system because some recipes will over write -# the PACKAGES variable. Thus if this class added a -source package -# to the list of packages to be created that package would be lost. -# See the linux kernel recipe for an example of this issue. -sourceipk_do_create_srcipk() { - if [ ${CREATE_SRCIPK} != "0" ] - then - # Copy sources for packaging - mkdir -p ${SRCIPK_STAGING_DIR}/${SRCIPK_INSTALL_DIR} - if [ -e ${SRCIPK_SRC_DIR} ]; then - if [ "${SRCIPK_SRC_DIR}" = "${WORKDIR}" ]; then - excludes='--exclude ./temp --exclude ${SRCIPK_STAGING_DIR}' - fi - tar -C ${SRCIPK_SRC_DIR} -cO $excludes . | tar -C ${SRCIPK_STAGING_DIR}/${SRCIPK_INSTALL_DIR} -xpf - - fi - - # Fix up patches/ directory to contain actual patches instead of symlinks - if [ -e ${SRCIPK_STAGING_DIR}/${SRCIPK_INSTALL_DIR}/patches ] - then - mv ${SRCIPK_STAGING_DIR}/${SRCIPK_INSTALL_DIR}/patches ${SRCIPK_STAGING_DIR}/${SRCIPK_INSTALL_DIR}/patches-links - cp -rL ${SRCIPK_STAGING_DIR}/${SRCIPK_INSTALL_DIR}/patches-links ${SRCIPK_STAGING_DIR}/${SRCIPK_INSTALL_DIR}/patches - rm -rf ${SRCIPK_STAGING_DIR}/${SRCIPK_INSTALL_DIR}/patches-links - fi - - if [ ${SRCIPK_INCLUDE_EXTRAFILES} != "0" ] - then - sourceipk_create_readme ${SRCIPK_STAGING_DIR}/${SRCIPK_INSTALL_DIR}/ - cp ${FILE} ${SRCIPK_STAGING_DIR}/${SRCIPK_INSTALL_DIR}/ - fi - - # Adjust the git repository if there is one. Do this adjustment - # here so we don't have to modify the original sources. - adjust_git - fi -} - -EXPORT_FUNCTIONS do_create_srcipk - -do_create_srcipk[deptask] = "do_patch" - -addtask create_srcipk after do_patch before do_configure - -python () { - if d.getVar('do_compileconfigs', False): - deps = d.getVarFlag('do_compileconfigs', 'deps') or [] - deps.append('do_create_srcipk') - d.setVarFlag('do_compileconfigs', 'deps', deps) -} - -#Add source packages to list of packages OE knows about -PACKAGES_DYNAMIC += "${PN}-source" - -# Do not perform any QA checks on sourceipk packages -INSANE_SKIP:${PN}-source += "${@oe.utils.conditional("${CREATE_SRCIPK}", "0", "", "${ALL_QA}", d)}" - -python __anonymous () { - if d.getVar("CREATE_SRCIPK") != "0": - if '${PN}-source' not in d.getVar("PACKAGES", False): - d.appendVar('PACKAGES', ' ${PN}-source') - pn = d.getVar("PN") - d.setVar('FILES:%s-source' % (pn), '${SRCIPK_INSTALL_DIR}') -} - -PACKAGESPLITFUNCS:append = " ${@oe.utils.conditional('CREATE_SRCIPK','0','','populate_srcipk_package',d)}" -populate_srcipk_package() { - install -d ${PKGDEST}/${PN}-source/${SRCIPK_INSTALL_DIR} - cp -Prf --preserve=mode,timestamps --no-preserve=ownership \ - ${SRCIPK_STAGING_DIR}/${SRCIPK_INSTALL_DIR}/. \ - ${PKGDEST}/${PN}-source/${SRCIPK_INSTALL_DIR} -}
meta-arago-distro/conf/distro/arago.conf +0 -3
@@ -189,9 +189,6 @@ INHERIT += "recipe-data" # Load default preferences require conf/distro/include/arago-prefs.inc -# Enable generation of source packages for SDKs -require conf/distro/include/arago-source-ipk.inc - # Allow branding on top of Arago Distro and Core TI-SDK # If ARAGO_BRAND is not set in local.conf, default to core ARAGO_BRAND ??= "core"
meta-arago-distro/conf/distro/include/arago-source-ipk.inc deleted +0 -368
368 lines not on this page · raw message
meta-arago-distro/recipes-core/images/tisdk-core-bundle.inc +1 -9
@@ -33,13 +33,5 @@ TISDK_TOOLCHAIN = "${@bb.utils.contains('MACHINE_FEATURES','gpu','meta-toolchain TOOLCHAIN_SUFFIX = "${@bb.utils.contains('MACHINE_FEATURES','gpu','-tisdk','-tisdk-server',d)}" IMAGE_INSTALL = "\ - packagegroup-arago-tisdk-addons-sdk-host \ - ${@['','packagegroup-arago-tisdk-opencl-sdk-host'][oe.utils.all_distro_features(d, 'opencl', True, False) and bb.utils.contains('MACHINE_FEATURES', 'dsp', True, False, d)]} \ - packagegroup-arago-tisdk-crypto-sdk-host \ - ${@bb.utils.contains('MACHINE_FEATURES','gpu','packagegroup-arago-tisdk-graphics-sdk-host','',d)} \ - packagegroup-arago-tisdk-matrix-sdk-host \ - packagegroup-arago-tisdk-multimedia-sdk-host \ - ${@bb.utils.contains('MACHINE_FEATURES','gpu','packagegroup-arago-tisdk-hmi-sdk-host','',d)} \ - packagegroup-arago-tisdk-amsdk-sdk-host${ARAGO_KERNEL_SUFFIX} \ - ${@bb.utils.contains('MACHINE_FEATURES','gpu','packagegroup-arago-tisdk-qte-sdk-host','',d)} \ + packagegroup-arago-tisdk-amsdk-sdk-host \ "
meta-arago-distro/recipes-core/packagegroups/packagegroup-arago-tisdk-addons-sdk-host.bb deleted +0 -104
104 lines not on this page · raw message
meta-arago-distro/recipes-core/packagegroups/packagegroup-arago-tisdk-amsdk-sdk-host.bb +1 -13
@@ -1,20 +1,11 @@ DESCRIPTION = "Task to install additional scripts and applications into the SDK" LICENSE = "MIT" -PR = "r29" - -PN = "packagegroup-arago-tisdk-amsdk-sdk-host${ARAGO_KERNEL_SUFFIX}" +PR = "r30" PACKAGE_ARCH = "${MACHINE_ARCH}" inherit packagegroup -# Choose the kernel and u-boot recipe sources to use -UBOOT_SRC = "${PREFERRED_PROVIDER_virtual/bootloader}-source" -KERNEL_SRC = "${PREFERRED_PROVIDER_virtual/kernel}-source" - -KERNEL_SHADOW_CLONE := "${PREFERRED_PROVIDER_virtual/kernel}" -KERNEL_SHADOW_CLONE_ENABLED := "${SRCIPK_SHALLOW_CLONE:pn-${KERNEL_SHADOW_CLONE}}" - EXTRA_FILES = "" EXTRA_FILES:ti43x = "tisdk-uenv" EXTRA_FILES:omap-a15 = "tisdk-readme tisdk-uenv"
@@ -23,8 +14,5 @@ EXTRA_FILES:k3 = "tisdk-readme tisdk-uenv" RDEPENDS:${PN} = "\ ti-tisdk-setup \ ${EXTRA_FILES} \ - ${UBOOT_SRC} \ - ${KERNEL_SRC} \ - ${@oe.utils.conditional('KERNEL_SHADOW_CLONE_ENABLED','true','unshallow-repositories','',d)} \ tisdk-install \ "
meta-arago-distro/recipes-core/packagegroups/packagegroup-arago-tisdk-crypto-sdk-host.bb deleted +0 -18
@@ -1,18 +0,0 @@ -DESCRIPTION = "Task to install crypto sources in SDK" -LICENSE = "MIT" -PR = "r11" - -PACKAGE_ARCH = "${MACHINE_ARCH}" - -inherit packagegroup - -CRYPTO_RDEPENDS = "" - -CRYPTO_RDEPENDS:append:ti33x = " cryptodev-module-source" -CRYPTO_RDEPENDS:append:ti43x = " cryptodev-module-source" -CRYPTO_RDEPENDS:append:dra7xx = " cryptodev-module-source" -CRYPTO_RDEPENDS:append:k3 = " cryptodev-module-source" - -RDEPENDS:${PN} = "\ - ${CRYPTO_RDEPENDS} \ -"
meta-arago-distro/recipes-core/packagegroups/packagegroup-arago-tisdk-graphics-sdk-host.bb deleted +0 -14
@@ -1,14 +0,0 @@ -SUMMARY = "Task to install graphics sources in SDK" -LICENSE = "MIT" -PR = "r8" - -PACKAGE_ARCH = "${MACHINE_ARCH}" - -inherit packagegroup features_check - -REQUIRED_MACHINE_FEATURES = "gpu" - -RDEPENDS:${PN} = "\ - ${PREFERRED_PROVIDER_virtual/gpudriver}-source \ - ${@bb.utils.contains('MACHINE_FEATURES', 'gc320', 'ti-gc320-driver-source', '', d)} \ -"
meta-arago-distro/recipes-core/packagegroups/packagegroup-arago-tisdk-hmi-sdk-host.bb deleted +0 -37
@@ -1,37 +0,0 @@ -SUMMARY = "Task to add HMI related sources into the SDK" -LICENSE = "MIT" -PR = "r1" - -PACKAGE_ARCH = "${MACHINE_ARCH}" - -inherit packagegroup features_check - -REQUIRED_MACHINE_FEATURES = "gpu" - -HMI = "" - -HMI:append:ti43x = " \ - evse-hmi-source \ - mmwavegesture-hmi-source \ -" - -HMI:append:ti33x = " \ - evse-hmi-source \ - protection-relays-hmi-source \ - mmwavegesture-hmi-source \ -" - - -HMI:append:omap-a15 = " \ - evse-hmi-source \ - mmwavegesture-hmi-source \ -" - -HMI:append:am65xx = " \ - evse-hmi-source \ - mmwavegesture-hmi-source \ -" - -RDEPENDS:${PN} = "\ - ${HMI} \ -"
meta-arago-distro/recipes-core/packagegroups/packagegroup-arago-tisdk-matrix-sdk-host.bb deleted +0 -17
@@ -1,17 +0,0 @@ -DESCRIPTION = "Task to install Matrix v2 and associated applications sources in the SDK" -LICENSE = "MIT" -PR = "r7" - -PACKAGE_ARCH = "${MACHINE_ARCH}" - -inherit packagegroup - -MATRIX_GUI = " \ - matrix-gui-browser-source \ - refresh-screen-source \ -" - -RDEPENDS:${PN} = "\ - matrix-gui-source \ - ${@bb.utils.contains('MACHINE_FEATURES','gpu',"${MATRIX_GUI}",'',d)} \ -"
meta-arago-distro/recipes-core/packagegroups/packagegroup-arago-tisdk-multimedia-sdk-host.bb deleted +0 -41
41 lines not on this page · raw message
meta-arago-distro/recipes-core/packagegroups/packagegroup-arago-tisdk-opencl-sdk-host.bb deleted +0 -22
@@ -1,22 +0,0 @@ -DESCRIPTION = "Task to install sources for OpenCL/MP apps and demos" -LICENSE = "MIT" -PR = "r1" - -PACKAGE_ARCH = "${MACHINE_ARCH}" - -inherit packagegroup features_check - -REQUIRED_DISTRO_FEATURES = "opencl" - -UTILS = " \ - opencl-examples-source \ - ${@oe.utils.all_distro_features(d, 'openmp', 'openmpacc-examples-source')} \ -" - -UTILS:append:dra7xx = " \ - ${@oe.utils.all_distro_features(d, 'openmp', 'linalg-examples-source')} \ -" - -RDEPENDS:${PN} = "\ - ${UTILS} \ -"
meta-arago-distro/recipes-core/packagegroups/packagegroup-arago-tisdk-qte-sdk-host.bb deleted +0 -11
@@ -1,11 +0,0 @@ -DESCRIPTION = "Task to add Qt embedded related sources into the sdk" -LICENSE = "MIT" -PR = "r8" - -PACKAGE_ARCH = "${MACHINE_ARCH}" - -inherit packagegroup - -RDEPENDS:${PN} = "\ - qt-tstat-source \ -"
meta-arago-distro/recipes-kernel/linux/copy-defconfig.inc deleted +0 -22
@@ -1,22 +0,0 @@ -CONFIG_NAME ?= "tisdk_${MACHINE}${ARAGO_KERNEL_SUFFIX}_defconfig" - -# Copy the configuration file used during the SDK build in Arago to -# the kernel sources to be packaged into the sourceipk. Then call -# the function to build the sourceipk again. This is done as a -# do_compile:prepend so that we can pick up any changes to the -# defconfig thay may have been done by the sanitizer code. -do_configure:append() { - cp ${B}/.config ${S}/arch/${ARCH}/configs/${CONFIG_NAME} - - # Remove defconfig generated by defconfig_builder to avoid confusion. This - # may not match the config used in the build due to KERNEL_CONFIG_FRAGMENTS. - config=`cat ${WORKDIR}/defconfig | grep use-tisdk-config | cut -d= -f2` - if [ -n "$config" ] - then - rm ${S}/arch/${ARCH}/configs/${config}_defconfig - fi -} - -# Move create_srcipk task so that the release defconfig is included. -deltask do_create_srcipk -addtask create_srcipk after do_configure before do_compile
meta-arago-distro/recipes-kernel/linux/linux-ti-staging-rt_%.bbappend +0 -1
@@ -2,7 +2,6 @@ MACHINE_KERNEL_PR:append = ".arago1" FILESEXTRAPATHS:prepend := "${THISDIR}/${PN}:" -require copy-defconfig.inc require docker.inc ALLOW_EMPTY:kernel-devicetree = "1"
meta-arago-distro/recipes-kernel/linux/linux-ti-staging-systest_%.bbappend +0 -1
@@ -2,7 +2,6 @@ MACHINE_KERNEL_PR:append = ".arago1" FILESEXTRAPATHS:prepend := "${THISDIR}/${PN}:" -require copy-defconfig.inc require docker.inc ALLOW_EMPTY:kernel-devicetree = "1"
meta-arago-distro/recipes-kernel/linux/linux-ti-staging_%.bbappend +0 -1
@@ -2,7 +2,6 @@ MACHINE_KERNEL_PR:append = ".arago5" FILESEXTRAPATHS:prepend := "${THISDIR}/${PN}:" -require copy-defconfig.inc require docker.inc ALLOW_EMPTY:kernel-devicetree = "1"
Signature · 1 line
2.25.1