dt-bindings: timer: add Broadcom's BCMBCA timers
Subsystems (4)
PATCH v2 1/1 dt-bindings: timer: add Broadcom's BCMBCA timers
From: Rafał Miłecki <[email protected]>
BCA is a big set / family of Broadcom devices sharing multiple hardware blocks. One of them is timer that actually exists in two versions. It's a part of TWD MFD block.
Add binding for it so SoCs can be properly described. Linux (and probably any other OS) doesn't really seem to need a driver for it. it may be needed for bootloaders (e.g. U-Boot) though. Especially for SoCs with CPUs other than Cortex-A9 (which contains arch timers).
---
V2: Limit to 1 example (they were almost the same)
Drop "," in "e.g.," --- .../devicetree/bindings/mfd/brcm,twd.yaml | 8 ++++ .../bindings/timer/brcm,bcmbca-timer.yaml | 40 +++++++++++++++++++ 2 files changed, 48 insertions(+) create mode 100644 Documentation/devicetree/bindings/timer/brcm,bcmbca-timer.yaml
Documentation/devicetree/bindings/mfd/brcm,twd.yaml +8 -0
@@ -36,6 +36,9 @@ properties: const: 1 patternProperties: + '^timer@[a-f0-9]+$': + $ref: /schemas/timer/brcm,bcmbca-timer.yaml + '^watchdog@[a-f0-9]+$': $ref: /schemas/watchdog/brcm,bcm7038-wdt.yaml
@@ -54,6 +57,11 @@ examples: #address-cells = <1>; #size-cells = <1>; + timer@0 { + compatible = "brcm,bcm63138-timer"; + reg = <0x0 0x28>; + }; + watchdog@28 { compatible = "brcm,bcm7038-wdt"; reg = <0x28 0x8>;
Documentation/devicetree/bindings/timer/brcm,bcmbca-timer.yaml new file +40 -0
@@ -0,0 +1,40 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/timer/brcm,bcmbca-timer.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom Broadband SoC timer + +maintainers: + - Rafał Miłecki <[email protected]> + +properties: + compatible: + oneOf: + - const: brcm,bcm6345-timer + description: > + An old block with 3 timers. + + It can be found in BCM6345, BCM6838 and BCM63268. + - const: brcm,bcm63138-timer + description: > + Updated block with 4 timers and control regs at the beginning. + + It can be found in newer SoCs, e.g. BCM63138, BCM63148, BCM63381, + BCM68360, BCM6848, BCM6858, BCM4908. + + reg: + maxItems: 1 + +additionalProperties: false + +required: + - reg + +examples: + - | + timer@fffe0200 { + compatible = "brcm,bcm6345-timer"; + reg = <0xfffe0200 0x1c>; + };
Signature · 1 line
2.34.1
Quoted 10 lines · Rafał Miłecki
From: Rafał Miłecki <[email protected]>
BCA is a big set / family of Broadcom devices sharing multiple hardware blocks. One of them is timer that actually exists in two versions. It's a part of TWD MFD block.
Add binding for it so SoCs can be properly described. Linux (and probably any other OS) doesn't really seem to need a driver for it. it may be needed for bootloaders (e.g. U-Boot) though. Especially for SoCs with CPUs other than Cortex-A9 (which contains arch timers).
Best regards,
Krzysztof
Quoted 12 lines · Rafał Miłecki
From: Rafał Miłecki <[email protected]>
BCA is a big set / family of Broadcom devices sharing multiple hardware blocks. One of them is timer that actually exists in two versions. It's a part of TWD MFD block.
Add binding for it so SoCs can be properly described. Linux (and probably any other OS) doesn't really seem to need a driver for it. it may be needed for bootloaders (e.g. U-Boot) though. Especially for SoCs with CPUs other than Cortex-A9 (which contains arch timers).
Signed-off-by Rafał Miłecki <[email protected]>
Quoted 8 lines
---
V2: Limit to 1 example (they were almost the same)Drop "," in "e.g.," --- .../devicetree/bindings/mfd/brcm,twd.yaml | 8 ++++ .../bindings/timer/brcm,bcmbca-timer.yaml | 40 +++++++++++++++++++ 2 files changed, 48 insertions(+) create mode 100644 Documentation/devicetree/bindings/timer/brcm,bcmbca-timer.yaml
Applied, thanks.
Signature · 1 line
Lee Jones [李琼斯]