MIPS: pic32: treat port as signed integer
PATCH 1/1 MIPS: pic32: treat port as signed integer
get_port_from_cmdline() returns an int, yet is assigned to a char, which is wrong in its own right, but also, with char becoming unsigned, this poses problems, because -1 is used as an error value. Further complicating things, fw_init_early_console() is only ever called with a -1 argument. Fix this up by removing the unused argument from fw_init_early_console() and treating port as a proper signed integer.
---
Thomas - this is part of the -funsigned-char work I've been accumulating in my unsigned-char branch. If you want to take this as a fix for 6.1, go ahead. Otherwise, Linus asked me to keep the 6.2 unsigned-char patches together in my branch, so I'll take this, pending your Ack. -Jason
arch/mips/include/asm/fw/fw.h | 2 +- arch/mips/pic32/pic32mzda/early_console.c | 13 ++++++------- arch/mips/pic32/pic32mzda/init.c | 2 +- 3 files changed, 8 insertions(+), 9 deletions(-)
arch/mips/include/asm/fw/fw.h +1 -1
@@ -26,6 +26,6 @@ extern char *fw_getcmdline(void);extern void fw_meminit (void );extern char *fw_getenv (char *name);extern unsigned long fw_getenvl (char *name); -extern void fw_init_early_console (char port); +extern void fw_init_early_console (void );#endif /* __ASM_FW_H_ */
arch/mips/pic32/pic32mzda/early_console.c +6 -7
@@ -27,7 +27,7 @@#define U_BRG (x) (UART_BASE(x) + 0x40)static void __iomem *uart_base; -static char console_port =-1 ; +static int console_port =-1 ;static int __init configure_uart_pins (int port) {
@@ -47,7 +47,7 @@ static int __init configure_uart_pins(int port)return 0 ; } -static void __init configure_uart (char port,int baud) +static void __init configure_uart (int port,int baud) {u32 pbclk;
@@ -60,7 +60,7 @@ static void __init configure_uart(char port, int baud) uart_base + PIC32_SET(U_STA(port))); } -static void __init setup_early_console (char port,int baud) +static void __init setup_early_console (int port,int baud) {if (configure_uart_pins (port))return ;
@@ -130,16 +130,15 @@ static int __init get_baud_from_cmdline(char *arch_cmdline)return baud; } -void __init fw_init_early_console (char port) +void __init fw_init_early_console (void ) {char *arch_cmdline =pic32_getcmdline (); -int baud =-1 ; +int baud, port; uart_base =ioremap (PIC32_BASE_UART ,0xc00 ); baud =get_baud_from_cmdline (arch_cmdline); -if (port ==-1 ) - port =get_port_from_cmdline (arch_cmdline); + port =get_port_from_cmdline (arch_cmdline);if (port ==-1 ) port =EARLY_CONSOLE_PORT ;
arch/mips/pic32/pic32mzda/init.c +1 -1
@@ -47,7 +47,7 @@ void __init plat_mem_setup(void)strscpy (arcs_cmdline, boot_command_line,COMMAND_LINE_SIZE );#ifdef CONFIG_EARLY_PRINTK -fw_init_early_console (-1 ); +fw_init_early_console ();#endif pic32_config_init (); }
Signature · 1 line
2.38.1
Quoted 16 lines · Jason A. Donenfeld
get_port_from_cmdline()returns an int, yet is assigned to a char, which is wrong in its own right, but also, with char becoming unsigned, this poses problems, because -1 is used as an error value. Further complicating things,fw_init_early_console()is only ever called with a -1 argument. Fix this up by removing the unused argument fromfw_init_early_console()and treating port as a proper signed integer.Cc Thomas Bogendoerfer <[email protected]>Signed-off-by Jason A. Donenfeld <[email protected]>---
Thomas - this is part of the -funsigned-char work I've been accumulating in my unsigned-char branch. If you want to take this as a fix for 6.1, go ahead. Otherwise, Linus asked me to keep the 6.2 unsigned-char patches together in my branch, so I'll take this, pending your Ack. -Jason
Quoted 4 lines
arch/mips/include/asm/fw/fw.h | 2 +- arch/mips/pic32/pic32mzda/early_console.c | 13 ++++++------- arch/mips/pic32/pic32mzda/init.c | 2 +- 3 files changed, 8 insertions(+), 9 deletions(-)
applied to mips-fixes.
Thomas.
Signature · 2 lines
Crap can work. Given enough thrust pigs will fly, but it's not necessarily a good idea. [ RFC1925, 2.3 ]