Endianess and coding style fixes for SVQ event idx support
cover Endianess and coding style fixes for SVQ event idx support
Some fixes that did not get in time for the last net pull request.
Eugenio Pérez (4):
vhost: Delete useless casting
vhost: convert byte order on SVQ used event write
vhost: Fix lines over 80 characters
vhost: convert byte order on avail_event read
hw/virtio/vhost-shadow-virtqueue.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-)
Signature · 1 line
2.31.1
PATCH 1/4 vhost: Delete useless casting
The used event is already an uint16_t pointer
--- hw/virtio/vhost-shadow-virtqueue.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
hw/virtio/vhost-shadow-virtqueue.c +1 -1
@@ -381,7 +381,7 @@ static bool vhost_svq_more_used(VhostShadowVirtqueue *svq)static bool vhost_svq_enable_notification (VhostShadowVirtqueue *svq) {if (virtio_vdev_has_feature (svq->vdev,VIRTIO_RING_F_EVENT_IDX )) { -uint16_t *used_event = (uint16_t *)&svq->vring.avail->ring[svq->vring.num]; +uint16_t *used_event = &svq->vring.avail->ring[svq->vring.num]; *used_event = svq->shadow_used_idx; }else { svq->vring.avail->flags &= ~cpu_to_le16 (VRING_AVAIL_F_NO_INTERRUPT );
Signature · 1 line
2.31.1
Re: [PATCH 1/4] vhost: Delete useless casting
Quoted 6 lines · Eugenio Pérez
The used event is already an
uint16_tpointerSigned-off-by Eugenio Pérez <[email protected]>--- hw/virtio/vhost-shadow-virtqueue.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
PATCH 2/4 vhost: convert byte order on SVQ used event write
In reply to Eugenio PérezThis causes errors on virtio modern devices on big endian hosts
--- hw/virtio/vhost-shadow-virtqueue.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
hw/virtio/vhost-shadow-virtqueue.c +1 -1
@@ -382,7 +382,7 @@ static bool vhost_svq_enable_notification(VhostShadowVirtqueue *svq) {if (virtio_vdev_has_feature (svq->vdev,VIRTIO_RING_F_EVENT_IDX )) {uint16_t *used_event = &svq->vring.avail->ring[svq->vring.num]; - *used_event = svq->shadow_used_idx; + *used_event =cpu_to_le16 (svq->shadow_used_idx); }else { svq->vring.avail->flags &= ~cpu_to_le16 (VRING_AVAIL_F_NO_INTERRUPT ); }
Signature · 1 line
2.31.1
Re: [PATCH 2/4] vhost: convert byte order on SVQ used event write
Quoted 13 lines · Eugenio Pérez
This causes errors on virtio modern devices on big endian hosts
Fixes 01f8beacea2a ("vhost: toggle device callbacks using used event idx")Signed-off-by Eugenio Pérez <[email protected]>--- hw/virtio/vhost-shadow-virtqueue.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)hw/virtio/vhost-shadow-virtqueue.c +0
-0
hw/virtio/vhost-shadow-virtqueue.c static bool vhost_svq_enable_notification(VhostShadowVirtqueue *svq) · line 385
Quoted 5 lines
hw/virtio/vhost-shadow-virtqueue.c +1
-1@@ -382,7 +382,7 @@ static bool vhost_svq_enable_notification(VhostShadowVirtqueue *svq) {if (virtio_vdev_has_feature (svq->vdev,VIRTIO_RING_F_EVENT_IDX )) {uint16_t *used_event = &svq->vring.avail->ring[svq->vring.num]; - *used_event = svq->shadow_used_idx; + *used_event =cpu_to_le16 (svq->shadow_used_idx);
This looks correct, but what about:
virtio_stw_p(svq->vdev, used_event, svq->shadow_used_idx);
Quoted 3 lines
hw/virtio/vhost-shadow-virtqueue.c +0
-0}else { svq->vring.avail->flags &= ~cpu_to_le16 (VRING_AVAIL_F_NO_INTERRUPT ); }
Re: [PATCH 2/4] vhost: convert byte order on SVQ used event write
Quoted 22 lines · Philippe Mathieu-Daudé
Quoted 13 lines · Eugenio Pérez
This causes errors on virtio modern devices on big endian hosts
Fixes 01f8beacea2a ("vhost: toggle device callbacks using used event idx")Signed-off-by Eugenio Pérez <[email protected]>--- hw/virtio/vhost-shadow-virtqueue.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)hw/virtio/vhost-shadow-virtqueue.c +0
-0hw/virtio/vhost-shadow-virtqueue.c static bool vhost_svq_enable_notification(VhostShadowVirtqueue *svq) · line 385
Quoted 5 lines
hw/virtio/vhost-shadow-virtqueue.c +1
-1@@ -382,7 +382,7 @@ static bool vhost_svq_enable_notification(VhostShadowVirtqueue *svq) {if (virtio_vdev_has_feature (svq->vdev,VIRTIO_RING_F_EVENT_IDX )) {uint16_t *used_event = &svq->vring.avail->ring[svq->vring.num]; - *used_event = svq->shadow_used_idx; + *used_event =cpu_to_le16 (svq->shadow_used_idx);This looks correct, but what about:
Quoted 1 line
virtio_stw_p(svq->vdev, used_event, svq->shadow_used_idx);
Philippe thanks for review but this comment isn't all that clear. I think you meant something like:
this won't handle endian-ness for legacy virtio devices on BE correctly. I think virtio_stw_p would be better.
which would make sense.
Yes contributors should document motivation for changes but so should reviewers.
Quoted 3 lines
Quoted 3 lines
hw/virtio/vhost-shadow-virtqueue.c +0
-0}else { svq->vring.avail->flags &= ~cpu_to_le16 (VRING_AVAIL_F_NO_INTERRUPT ); }
Re: [PATCH 2/4] vhost: convert byte order on SVQ used event write
Quoted 31 lines · Michael S. Tsirkin
Quoted 22 lines · Philippe Mathieu-Daudé
Quoted 13 lines · Eugenio Pérez
This causes errors on virtio modern devices on big endian hosts
Fixes 01f8beacea2a ("vhost: toggle device callbacks using used event idx")Signed-off-by Eugenio Pérez <[email protected]>--- hw/virtio/vhost-shadow-virtqueue.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)hw/virtio/vhost-shadow-virtqueue.c +0
-0hw/virtio/vhost-shadow-virtqueue.c static bool vhost_svq_enable_notification(VhostShadowVirtqueue *svq) · line 385
Quoted 5 lines
hw/virtio/vhost-shadow-virtqueue.c +1
-1@@ -382,7 +382,7 @@ static bool vhost_svq_enable_notification(VhostShadowVirtqueue *svq) {if (virtio_vdev_has_feature (svq->vdev,VIRTIO_RING_F_EVENT_IDX )) {uint16_t *used_event = &svq->vring.avail->ring[svq->vring.num]; - *used_event = svq->shadow_used_idx; + *used_event =cpu_to_le16 (svq->shadow_used_idx);This looks correct, but what about:
Quoted 1 line
virtio_stw_p(svq->vdev, used_event, svq->shadow_used_idx);Philippe thanks for review but this comment isn't all that clear. I think you meant something like:
this won't handle endian-ness for legacy virtio devices on BE correctly. I thinkvirtio_stw_pwould be better.
Quoted 4 lines
which would make sense.
Yes contributors should document motivation for changes but so should reviewers.
Yes, fair enough :)
Re: [PATCH 2/4] vhost: convert byte order on SVQ used event write
In reply to Philippe Mathieu-DaudéQuoted 23 lines · Philippe Mathieu-Daudé
Quoted 13 lines · Eugenio Pérez
This causes errors on virtio modern devices on big endian hosts
Fixes 01f8beacea2a ("vhost: toggle device callbacks using used event idx")Signed-off-by Eugenio Pérez <[email protected]>--- hw/virtio/vhost-shadow-virtqueue.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)hw/virtio/vhost-shadow-virtqueue.c +0
-0hw/virtio/vhost-shadow-virtqueue.c static bool vhost_svq_enable_notification(VhostShadowVirtqueue *svq) · line 385
Quoted 5 lines
hw/virtio/vhost-shadow-virtqueue.c +1
-1@@ -382,7 +382,7 @@ static bool vhost_svq_enable_notification(VhostShadowVirtqueue *svq) {if (virtio_vdev_has_feature (svq->vdev,VIRTIO_RING_F_EVENT_IDX )) {uint16_t *used_event = &svq->vring.avail->ring[svq->vring.num]; - *used_event = svq->shadow_used_idx; + *used_event =cpu_to_le16 (svq->shadow_used_idx);This looks correct, but what about:
Quoted 2 lines
virtio_stw_p(svq->vdev, used_event, svq->shadow_used_idx);
Hi Philippe,
I think this has the same answer as [1], the endianness conversion from the guest to the host may not be the same as the one needed from qemu SVQ to the vdpa device. Please let me know if it is not the case.
Thanks!
[1] https://lists.nongnu.org/archive/html/qemu-devel/2022-10/msg06081.html
Quoted 4 lines
Quoted 3 lines
hw/virtio/vhost-shadow-virtqueue.c +0
-0}else { svq->vring.avail->flags &= ~cpu_to_le16 (VRING_AVAIL_F_NO_INTERRUPT ); }
Re: [PATCH 2/4] vhost: convert byte order on SVQ used event write
Quoted 30 lines · Eugenio Perez Martin
Quoted 23 lines · Philippe Mathieu-Daudé
Quoted 13 lines · Eugenio Pérez
This causes errors on virtio modern devices on big endian hosts
Fixes 01f8beacea2a ("vhost: toggle device callbacks using used event idx")Signed-off-by Eugenio Pérez <[email protected]>--- hw/virtio/vhost-shadow-virtqueue.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)hw/virtio/vhost-shadow-virtqueue.c +0
-0hw/virtio/vhost-shadow-virtqueue.c static bool vhost_svq_enable_notification(VhostShadowVirtqueue *svq) · line 385
Quoted 5 lines
hw/virtio/vhost-shadow-virtqueue.c +1
-1@@ -382,7 +382,7 @@ static bool vhost_svq_enable_notification(VhostShadowVirtqueue *svq) {if (virtio_vdev_has_feature (svq->vdev,VIRTIO_RING_F_EVENT_IDX )) {uint16_t *used_event = &svq->vring.avail->ring[svq->vring.num]; - *used_event = svq->shadow_used_idx; + *used_event =cpu_to_le16 (svq->shadow_used_idx);This looks correct, but what about:
Quoted 2 lines
virtio_stw_p(svq->vdev, used_event, svq->shadow_used_idx);Hi Philippe,
Quoted 7 lines
I think this has the same answer as [1], the endianness conversion from the guest to the host may not be the same as the one needed from qemu SVQ to the vdpa device. Please let me know if it is not the case.
Thanks!
[1] https://lists.nongnu.org/archive/html/qemu-devel/2022-10/msg06081.html
So considering legacy, i do not belive you can make a legacy device on top of modern one using SVQ alone.
So I'd say SVQ should follow virtio endian-ness, not LE.
Quoted 4 lines
Quoted 4 lines
Quoted 3 lines
hw/virtio/vhost-shadow-virtqueue.c +0
-0}else { svq->vring.avail->flags &= ~cpu_to_le16 (VRING_AVAIL_F_NO_INTERRUPT ); }
Re: [PATCH 2/4] vhost: convert byte order on SVQ used event write
Quoted 36 lines · Michael S. Tsirkin
Quoted 34 lines · Eugenio Perez Martin
Quoted 23 lines · Philippe Mathieu-Daudé
Quoted 13 lines · Eugenio Pérez
This causes errors on virtio modern devices on big endian hosts
Fixes 01f8beacea2a ("vhost: toggle device callbacks using used event idx")Signed-off-by Eugenio Pérez <[email protected]>--- hw/virtio/vhost-shadow-virtqueue.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)hw/virtio/vhost-shadow-virtqueue.c +0
-0hw/virtio/vhost-shadow-virtqueue.c static bool vhost_svq_enable_notification(VhostShadowVirtqueue *svq) · line 385
Quoted 5 lines
hw/virtio/vhost-shadow-virtqueue.c +1
-1@@ -382,7 +382,7 @@ static bool vhost_svq_enable_notification(VhostShadowVirtqueue *svq) {if (virtio_vdev_has_feature (svq->vdev,VIRTIO_RING_F_EVENT_IDX )) {uint16_t *used_event = &svq->vring.avail->ring[svq->vring.num]; - *used_event = svq->shadow_used_idx; + *used_event =cpu_to_le16 (svq->shadow_used_idx);This looks correct, but what about:
Quoted 2 lines
virtio_stw_p(svq->vdev, used_event, svq->shadow_used_idx);Hi Philippe,
I think this has the same answer as [1], the endianness conversion from the guest to the host may not be the same as the one needed from qemu SVQ to the vdpa device. Please let me know if it is not the case.
Quoted 7 lines
Quoted 3 lines
Thanks!
[1] https://lists.nongnu.org/archive/html/qemu-devel/2022-10/msg06081.html
So considering legacy, i do not belive you can make a legacy device on top of modern one using SVQ alone.
Right, more work is needed. For example, config r/w conversions. But it's a valid use case where SVQ helps too.
Quoted 1 line
So I'd say SVQ should follow virtio endian-ness, not LE.
At this moment both the device that the guest sees and the vdpa device must be modern ones to enable SVQ. So the event idx must be stored in the vring in LE. Similar access functions as virtio_ld* and virtio_st* are needed if SVQ supports legacy vdpa devices in the future.
The point is that svq->shadow_avail_idx is decoupled from the guest's avail ring, event idx, etc. It will always be in the host's CPU endianness, regardless of the guest's one. And, for the moment, the event idx write must be in LE.
There is a more fundamental problem about using virtio_{st,ld}* here:
These read from and write to guest's memory, but neither svq->shadow_used_idx or shadow vring are in guest's memory but only in qemu's VA. To start the support of legacy vdpa devices would involve a deeper change here, since all shadow vring writes and reads are written this way.
Thanks!
Quoted 7 lines
Quoted 6 lines
Quoted 6 lines
Quoted 5 lines
hw/virtio/vhost-shadow-virtqueue.c +0
-0}else { svq->vring.avail->flags &= ~cpu_to_le16 (VRING_AVAIL_F_NO_INTERRUPT ); }
Re: [PATCH 2/4] vhost: convert byte order on SVQ used event write
Quoted 39 lines · Eugenio Perez Martin
Quoted 38 lines · Michael S. Tsirkin
Quoted 36 lines · Eugenio Perez Martin
Quoted 23 lines · Philippe Mathieu-Daudé
Quoted 13 lines · Eugenio Pérez
This causes errors on virtio modern devices on big endian hosts
Fixes 01f8beacea2a ("vhost: toggle device callbacks using used event idx")Signed-off-by Eugenio Pérez <[email protected]>--- hw/virtio/vhost-shadow-virtqueue.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)hw/virtio/vhost-shadow-virtqueue.c +0
-0hw/virtio/vhost-shadow-virtqueue.c static bool vhost_svq_enable_notification(VhostShadowVirtqueue *svq) · line 385
Quoted 5 lines
hw/virtio/vhost-shadow-virtqueue.c +1
-1@@ -382,7 +382,7 @@ static bool vhost_svq_enable_notification(VhostShadowVirtqueue *svq) {if (virtio_vdev_has_feature (svq->vdev,VIRTIO_RING_F_EVENT_IDX )) {uint16_t *used_event = &svq->vring.avail->ring[svq->vring.num]; - *used_event = svq->shadow_used_idx; + *used_event =cpu_to_le16 (svq->shadow_used_idx);This looks correct, but what about:
Quoted 2 lines
virtio_stw_p(svq->vdev, used_event, svq->shadow_used_idx);Hi Philippe,
I think this has the same answer as [1], the endianness conversion from the guest to the host may not be the same as the one needed from qemu SVQ to the vdpa device. Please let me know if it is not the case.
Thanks!
Quoted 8 lines
Quoted 5 lines
So considering legacy, i do not belive you can make a legacy device on top of modern one using SVQ alone.
Right, more work is needed. For example, config r/w conversions. But it's a valid use case where SVQ helps too.
I am not sure why it's valid frankly.
Quoted 12 lines
Quoted 1 line
So I'd say SVQ should follow virtio endian-ness, not LE.
At this moment both the device that the guest sees and the vdpa device must be modern ones to enable SVQ. So the event idx must be stored in the vring in LE. Similar access functions as virtio_ld* and virtio_st* are needed if SVQ supports legacy vdpa devices in the future.
The point is that
svq->shadow_avail_idxis decoupled from the guest's avail ring, event idx, etc. It will always be in the host's CPU endianness, regardless of the guest's one. And, for the moment, the event idx write must be in LE.
Quoted 8 lines
There is a more fundamental problem about using virtio_{st,ld}* here:
These read from and write to guest's memory, but neithersvq->shadow_used_idxor shadow vring are in guest's memory but only in qemu's VA. To start the support of legacy vdpa devices would involve a deeper change here, since all shadow vring writes and reads are written this way.Thanks!
Yea generally, I don't know how it can work given legacy will never attach a PASID to a VQ.
But maybe given we add yet another variant of endian-ness it is time to actually use sparse tags for this stuff.
Quoted 7 lines
Quoted 7 lines
Quoted 6 lines
Quoted 6 lines
Quoted 5 lines
hw/virtio/vhost-shadow-virtqueue.c +0
-0}else { svq->vring.avail->flags &= ~cpu_to_le16 (VRING_AVAIL_F_NO_INTERRUPT ); }
Re: [PATCH 2/4] vhost: convert byte order on SVQ used event write
Quoted 71 lines · Michael S. Tsirkin
Quoted 39 lines · Eugenio Perez Martin
Quoted 38 lines · Michael S. Tsirkin
Quoted 36 lines · Eugenio Perez Martin
Quoted 23 lines · Philippe Mathieu-Daudé
Quoted 13 lines · Eugenio Pérez
This causes errors on virtio modern devices on big endian hosts
Fixes 01f8beacea2a ("vhost: toggle device callbacks using used event idx")Signed-off-by Eugenio Pérez <[email protected]>--- hw/virtio/vhost-shadow-virtqueue.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)hw/virtio/vhost-shadow-virtqueue.c +0
-0hw/virtio/vhost-shadow-virtqueue.c static bool vhost_svq_enable_notification(VhostShadowVirtqueue *svq) · line 385
Quoted 5 lines
hw/virtio/vhost-shadow-virtqueue.c +1
-1@@ -382,7 +382,7 @@ static bool vhost_svq_enable_notification(VhostShadowVirtqueue *svq) {if (virtio_vdev_has_feature (svq->vdev,VIRTIO_RING_F_EVENT_IDX )) {uint16_t *used_event = &svq->vring.avail->ring[svq->vring.num]; - *used_event = svq->shadow_used_idx; + *used_event =cpu_to_le16 (svq->shadow_used_idx);This looks correct, but what about:
Quoted 2 lines
virtio_stw_p(svq->vdev, used_event, svq->shadow_used_idx);Hi Philippe,
I think this has the same answer as [1], the endianness conversion from the guest to the host may not be the same as the one needed from qemu SVQ to the vdpa device. Please let me know if it is not the case.
Thanks!
Quoted 8 lines
Quoted 5 lines
So considering legacy, i do not belive you can make a legacy device on top of modern one using SVQ alone.
Right, more work is needed. For example, config r/w conversions. But it's a valid use case where SVQ helps too.
I am not sure why it's valid frankly.
Quoted 19 lines
Quoted 1 line
So I'd say SVQ should follow virtio endian-ness, not LE.
At this moment both the device that the guest sees and the vdpa device must be modern ones to enable SVQ. So the event idx must be stored in the vring in LE. Similar access functions as virtio_ld* and virtio_st* are needed if SVQ supports legacy vdpa devices in the future.
The point is that
svq->shadow_avail_idxis decoupled from the guest's avail ring, event idx, etc. It will always be in the host's CPU endianness, regardless of the guest's one. And, for the moment, the event idx write must be in LE.There is a more fundamental problem about using virtio_{st,ld}* here:
These read from and write to guest's memory, but neithersvq->shadow_used_idxor shadow vring are in guest's memory but only in qemu's VA. To start the support of legacy vdpa devices would involve a deeper change here, since all shadow vring writes and reads are written this way.
Quoted 5 lines
Quoted 1 line
Thanks!
Yea generally, I don't know how it can work given legacy will never attach a PASID to a VQ.
The conversion I tried to put here was legacy guests communicating in big endian with qemu, and then qemu communicating in little endian with modern devices. For this to work SVQ should be enabled for all the queues all the time.
Then the simplest conversion function here should be cpu_to_leNN, isn't it? The only device we support here is a modern, little endian,
But maybe my example just added more noise. My point is that this write and all the writes and loads added on these patches, have nothing to do with the guest's endianness. They are only from the SVQ vring to the device. And they are not forwarding the used_event of the guest, but another decoupled one that may or may not match. That's why the endianness we should take into account is not the vdev one, but only the CPU and little endian.
Quoted 3 lines
But maybe given we add yet another variant of endian-ness it is time to actually use sparse tags for this stuff.
I agree with this. I can try to do a fast POC.
Thanks!
Quoted 8 lines
Quoted 7 lines
Quoted 7 lines
Quoted 6 lines
Quoted 6 lines
Quoted 5 lines
hw/virtio/vhost-shadow-virtqueue.c +0
-0}else { svq->vring.avail->flags &= ~cpu_to_le16 (VRING_AVAIL_F_NO_INTERRUPT ); }
Re: [PATCH 2/4] vhost: convert byte order on SVQ used event write
Quoted 74 lines · Eugenio Perez Martin
Quoted 73 lines · Michael S. Tsirkin
Quoted 39 lines · Eugenio Perez Martin
Quoted 38 lines · Michael S. Tsirkin
Quoted 36 lines · Eugenio Perez Martin
Quoted 23 lines · Philippe Mathieu-Daudé
Quoted 13 lines · Eugenio Pérez
This causes errors on virtio modern devices on big endian hosts
Fixes 01f8beacea2a ("vhost: toggle device callbacks using used event idx")Signed-off-by Eugenio Pérez <[email protected]>--- hw/virtio/vhost-shadow-virtqueue.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)hw/virtio/vhost-shadow-virtqueue.c +0
-0hw/virtio/vhost-shadow-virtqueue.c static bool vhost_svq_enable_notification(VhostShadowVirtqueue *svq) · line 385
Quoted 5 lines
hw/virtio/vhost-shadow-virtqueue.c +1
-1@@ -382,7 +382,7 @@ static bool vhost_svq_enable_notification(VhostShadowVirtqueue *svq) {if (virtio_vdev_has_feature (svq->vdev,VIRTIO_RING_F_EVENT_IDX )) {uint16_t *used_event = &svq->vring.avail->ring[svq->vring.num]; - *used_event = svq->shadow_used_idx; + *used_event =cpu_to_le16 (svq->shadow_used_idx);This looks correct, but what about:
Quoted 2 lines
virtio_stw_p(svq->vdev, used_event, svq->shadow_used_idx);Hi Philippe,
I think this has the same answer as [1], the endianness conversion from the guest to the host may not be the same as the one needed from qemu SVQ to the vdpa device. Please let me know if it is not the case.
Thanks!
Quoted 8 lines
Quoted 5 lines
So considering legacy, i do not belive you can make a legacy device on top of modern one using SVQ alone.
Right, more work is needed. For example, config r/w conversions. But it's a valid use case where SVQ helps too.
I am not sure why it's valid frankly.
Quoted 20 lines
Quoted 1 line
So I'd say SVQ should follow virtio endian-ness, not LE.
At this moment both the device that the guest sees and the vdpa device must be modern ones to enable SVQ. So the event idx must be stored in the vring in LE. Similar access functions as virtio_ld* and virtio_st* are needed if SVQ supports legacy vdpa devices in the future.
The point is that
svq->shadow_avail_idxis decoupled from the guest's avail ring, event idx, etc. It will always be in the host's CPU endianness, regardless of the guest's one. And, for the moment, the event idx write must be in LE.There is a more fundamental problem about using virtio_{st,ld}* here:
These read from and write to guest's memory, but neithersvq->shadow_used_idxor shadow vring are in guest's memory but only in qemu's VA. To start the support of legacy vdpa devices would involve a deeper change here, since all shadow vring writes and reads are written this way.Thanks!
Quoted 8 lines
Quoted 3 lines
Yea generally, I don't know how it can work given legacy will never attach a PASID to a VQ.
The conversion I tried to put here was legacy guests communicating in big endian with qemu, and then qemu communicating in little endian with modern devices. For this to work SVQ should be enabled for all the queues all the time.
Yes I got that. This won't work so easily just because e.g. network header is slightly different, so it's more than just descriptor translations even just on data path.
Quoted 2 lines
Then the simplest conversion function here should be
cpu_to_leNN, isn't it? The only device we support here is a modern, little endian,
At the moment vdpa only properly works with modern. But really another way to support legacy is if a device has support, and to fix vdpa to support legacy.
Will we ever do that? Will anyone bother? I don't know.
Quoted 3 lines
But maybe my example just added more noise. My point is that this write and all the writes and loads added on these patches, have nothing to do with the guest's endianness.
Device might support programmable endian-ness. If it does, then yes we could thinkably have yet another type of endian-ness "device endian" but practically setting it to anything except guest endian is just inviting pain.
Quoted 23 lines
They are only from the SVQ
vring to the device. And they are not forwarding theused_eventof the guest, but another decoupled one that may or may not match. That's why the endianness we should take into account is not the vdev one, but only the CPU and little endian.Quoted 3 lines
But maybe given we add yet another variant of endian-ness it is time to actually use sparse tags for this stuff.
I agree with this. I can try to do a fast POC.
Thanks!
Quoted 8 lines
Quoted 7 lines
Quoted 7 lines
Quoted 6 lines
Quoted 6 lines
Quoted 5 lines
hw/virtio/vhost-shadow-virtqueue.c +0
-0}else { svq->vring.avail->flags &= ~cpu_to_le16 (VRING_AVAIL_F_NO_INTERRUPT ); }
PATCH 3/4 vhost: Fix lines over 80 characters
In reply to Eugenio PérezBy qemu coding style.
--- hw/virtio/vhost-shadow-virtqueue.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)
hw/virtio/vhost-shadow-virtqueue.c +5 -2
@@ -228,8 +228,11 @@ static void vhost_svq_kick(VhostShadowVirtqueue *svq)smp_mb ();if (virtio_vdev_has_feature (svq->vdev,VIRTIO_RING_F_EVENT_IDX )) { -uint16_t avail_event = *(uint16_t *)(&svq->vring.used->ring[svq->vring.num]); - needs_kick =vring_need_event (avail_event, svq->shadow_avail_idx, svq->shadow_avail_idx -1 ); +size_t num = svq->vring.num; +uint16_t *avail_event = (uint16_t *)&svq->vring.used->ring[num]; + + needs_kick =vring_need_event (*avail_event, svq->shadow_avail_idx, + svq->shadow_avail_idx -1 ); }else { needs_kick = !(svq->vring.used->flags &VRING_USED_F_NO_NOTIFY ); }
Signature · 1 line
2.31.1
Re: [PATCH 3/4] vhost: Fix lines over 80 characters
Quoted 3 lines · Eugenio Pérez
By qemu coding style.
Signed-off-by Eugenio Pérez <[email protected]>
You wrote this code originally so I don't mind but just to note I don't want a flurry of patches "fixing" lines over 80 chars.
Quoted 24 lines
--- hw/virtio/vhost-shadow-virtqueue.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)hw/virtio/vhost-shadow-virtqueue.c +5
-2@@ -228,8 +228,11 @@ static void vhost_svq_kick(VhostShadowVirtqueue *svq)smp_mb ();if (virtio_vdev_has_feature (svq->vdev,VIRTIO_RING_F_EVENT_IDX )) { -uint16_t avail_event = *(uint16_t *)(&svq->vring.used->ring[svq->vring.num]); - needs_kick =vring_need_event (avail_event, svq->shadow_avail_idx, svq->shadow_avail_idx -1 ); +size_t num = svq->vring.num; +uint16_t *avail_event = (uint16_t *)&svq->vring.used->ring[num]; + + needs_kick =vring_need_event (*avail_event, svq->shadow_avail_idx, + svq->shadow_avail_idx -1 ); }else { needs_kick = !(svq->vring.used->flags &VRING_USED_F_NO_NOTIFY ); }Signature · 1 line
2.31.1
Re: [PATCH 3/4] vhost: Fix lines over 80 characters
Quoted 9 lines · Michael S. Tsirkin
Quoted 3 lines · Eugenio Pérez
By qemu coding style.
Signed-off-by Eugenio Pérez <[email protected]>You wrote this code originally so I don't mind but just to note I don't want a flurry of patches "fixing" lines over 80 chars.
My bad, I didn't realize it the first time I sent it. I probably missed to run checkpatch.
This patch can be merged with the next one if it is more convenient.
Quoted 25 lines
Quoted 24 lines
--- hw/virtio/vhost-shadow-virtqueue.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)hw/virtio/vhost-shadow-virtqueue.c +5
-3@@ -228,8 +228,11 @@ static void vhost_svq_kick(VhostShadowVirtqueue *svq)smp_mb ();if (virtio_vdev_has_feature (svq->vdev,VIRTIO_RING_F_EVENT_IDX )) { -uint16_t avail_event = *(uint16_t *)(&svq->vring.used->ring[svq->vring.num]); - needs_kick =vring_need_event (avail_event, svq->shadow_avail_idx, svq->shadow_avail_idx -1 ); +size_t num = svq->vring.num; +uint16_t *avail_event = (uint16_t *)&svq->vring.used->ring[num]; + + needs_kick =vring_need_event (*avail_event, svq->shadow_avail_idx, + svq->shadow_avail_idx -1 ); }else { needs_kick = !(svq->vring.used->flags &VRING_USED_F_NO_NOTIFY ); } --2.31.1
PATCH 4/4 vhost: convert byte order on avail_event read
In reply to Eugenio PérezThis causes errors on virtio modern devices on big endian hosts
--- hw/virtio/vhost-shadow-virtqueue.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
hw/virtio/vhost-shadow-virtqueue.c +2 -1
@@ -231,7 +231,8 @@ static void vhost_svq_kick(VhostShadowVirtqueue *svq)size_t num = svq->vring.num;uint16_t *avail_event = (uint16_t *)&svq->vring.used->ring[num]; - needs_kick =vring_need_event (*avail_event, svq->shadow_avail_idx, + needs_kick =vring_need_event (le16_to_cpu (*avail_event), + svq->shadow_avail_idx, svq->shadow_avail_idx -1 ); }else { needs_kick = !(svq->vring.used->flags &VRING_USED_F_NO_NOTIFY );
Signature · 1 line
2.31.1
Re: [PATCH 4/4] vhost: convert byte order on avail_event read
Quoted 12 lines · Eugenio Pérez
This causes errors on virtio modern devices on big endian hosts
Signed-off-by Eugenio Pérez <[email protected]>--- hw/virtio/vhost-shadow-virtqueue.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)hw/virtio/vhost-shadow-virtqueue.c +0
-0
hw/virtio/vhost-shadow-virtqueue.c static void vhost_svq_kick(VhostShadowVirtqueue *svq) · line 233
Quoted 3 lines
hw/virtio/vhost-shadow-virtqueue.c +0
-0@@ -231,7 +231,8 @@ static void vhost_svq_kick(VhostShadowVirtqueue *svq)size_t num = svq->vring.num;uint16_t *avail_event = (uint16_t *)&svq->vring.used->ring[num];
uint16_t avail_event = virtio_lduw_p(svq->vdev,
&svq->vring.used->ring[num]);
needs_kick = vring_need_event(avail_event,
svq->shadow_avail_idx,
svq->shadow_avail_idx - 1);Quoted 6 lines
hw/virtio/vhost-shadow-virtqueue.c +2
-1- needs_kick =vring_need_event (*avail_event, svq->shadow_avail_idx, + needs_kick =vring_need_event (le16_to_cpu (*avail_event), + svq->shadow_avail_idx, svq->shadow_avail_idx -1 ); }else { needs_kick = !(svq->vring.used->flags &VRING_USED_F_NO_NOTIFY );
Re: [PATCH 4/4] vhost: convert byte order on avail_event read
Quoted 9 lines · Philippe Mathieu-Daudé
Quoted 7 lines · Eugenio Pérez
This causes errors on virtio modern devices on big endian hosts
Signed-off-by Eugenio Pérez <[email protected]>--- hw/virtio/vhost-shadow-virtqueue.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
Quoted 15 lines
hw/virtio/vhost-shadow-virtqueue.c static void vhost_svq_kick(VhostShadowVirtqueue *svq) · line 233
Quoted 8 lines
hw/virtio/vhost-shadow-virtqueue.c +0
-0@@ -231,7 +231,8 @@ static void vhost_svq_kick(VhostShadowVirtqueue *svq)size_t num = svq->vring.num;uint16_t *avail_event = (uint16_t *)&svq->vring.used->ring[num];uint16_t avail_event = virtio_lduw_p(svq->vdev, &svq->vring.used->ring[num]); needs_kick = vring_need_event(avail_event, svq->shadow_avail_idx, svq->shadow_avail_idx - 1);
It would work, but just because all vrings must be little endian for the moment. If we support legacy drivers on a big endian host and guest in the future, it would not work.
virtio_ld and virtio_st handle the conversions between the guest and the emulated device in qemu, but this conversion is between qemu shadow vring and the vdpa device (assuming modern, little endian for the moment).
Right now the feature set must be the same, but it could not be that way in the future.
Thanks!
Quoted 7 lines
Quoted 6 lines
hw/virtio/vhost-shadow-virtqueue.c +2
-1- needs_kick =vring_need_event (*avail_event, svq->shadow_avail_idx, + needs_kick =vring_need_event (le16_to_cpu (*avail_event), + svq->shadow_avail_idx, svq->shadow_avail_idx -1 ); }else { needs_kick = !(svq->vring.used->flags &VRING_USED_F_NO_NOTIFY );
Re: [PATCH 4/4] vhost: convert byte order on avail_event read
Quoted 36 lines · Eugenio Perez Martin
Quoted 9 lines · Philippe Mathieu-Daudé
Quoted 7 lines · Eugenio Pérez
This causes errors on virtio modern devices on big endian hosts
Signed-off-by Eugenio Pérez <[email protected]>--- hw/virtio/vhost-shadow-virtqueue.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)Quoted 15 lines
hw/virtio/vhost-shadow-virtqueue.c static void vhost_svq_kick(VhostShadowVirtqueue *svq) · line 233
Quoted 8 lines
hw/virtio/vhost-shadow-virtqueue.c +0
-0@@ -231,7 +231,8 @@ static void vhost_svq_kick(VhostShadowVirtqueue *svq)size_t num = svq->vring.num;uint16_t *avail_event = (uint16_t *)&svq->vring.used->ring[num];uint16_t avail_event = virtio_lduw_p(svq->vdev, &svq->vring.used->ring[num]); needs_kick = vring_need_event(avail_event, svq->shadow_avail_idx, svq->shadow_avail_idx - 1);It would work, but just because all vrings must be little endian for the moment. If we support legacy drivers on a big endian host and guest in the future, it would not work.
virtio_ldandvirtio_sthandle the conversions between the guest and the emulated device in qemu, but this conversion is between qemu shadow vring and the vdpa device (assuming modern, little endian for the moment).
Quoted 4 lines
Right now the feature set must be the same, but it could not be that way in the future.
Thanks!
I don't think this works legacy and virtio data path are similar but not similar enough to allow switches through svq alone.
Quoted 7 lines
Quoted 7 lines
Quoted 6 lines
hw/virtio/vhost-shadow-virtqueue.c +2
-1- needs_kick =vring_need_event (*avail_event, svq->shadow_avail_idx, + needs_kick =vring_need_event (le16_to_cpu (*avail_event), + svq->shadow_avail_idx, svq->shadow_avail_idx -1 ); }else { needs_kick = !(svq->vring.used->flags &VRING_USED_F_NO_NOTIFY );
Re: [PATCH 4/4] vhost: convert byte order on avail_event read
Quoted 34 lines · Michael S. Tsirkin
Quoted 33 lines · Eugenio Perez Martin
Quoted 8 lines · Philippe Mathieu-Daudé
Quoted 7 lines · Eugenio Pérez
This causes errors on virtio modern devices on big endian hosts
Signed-off-by Eugenio Pérez <[email protected]>--- hw/virtio/vhost-shadow-virtqueue.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)Quoted 14 lines
hw/virtio/vhost-shadow-virtqueue.c static void vhost_svq_kick(VhostShadowVirtqueue *svq) · line 233
Quoted 8 lines
hw/virtio/vhost-shadow-virtqueue.c +0
-0@@ -231,7 +231,8 @@ static void vhost_svq_kick(VhostShadowVirtqueue *svq)size_t num = svq->vring.num;uint16_t *avail_event = (uint16_t *)&svq->vring.used->ring[num];uint16_t avail_event = virtio_lduw_p(svq->vdev, &svq->vring.used->ring[num]); needs_kick = vring_need_event(avail_event, svq->shadow_avail_idx, svq->shadow_avail_idx - 1);It would work, but just because all vrings must be little endian for the moment. If we support legacy drivers on a big endian host and guest in the future, it would not work.
virtio_ldandvirtio_sthandle the conversions between the guest and the emulated device in qemu, but this conversion is between qemu shadow vring and the vdpa device (assuming modern, little endian for the moment).
Quoted 7 lines
Quoted 4 lines
Right now the feature set must be the same, but it could not be that way in the future.
Thanks!
I don't think this works legacy and virtio data path are similar but not similar enough to allow switches through svq alone.
Then we need full copy in that case, looks more like a normal network backend instead of registering it to as vhost backend.
Thanks
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
hw/virtio/vhost-shadow-virtqueue.c +2
-1- needs_kick =vring_need_event (*avail_event, svq->shadow_avail_idx, + needs_kick =vring_need_event (le16_to_cpu (*avail_event), + svq->shadow_avail_idx, svq->shadow_avail_idx -1 ); }else { needs_kick = !(svq->vring.used->flags &VRING_USED_F_NO_NOTIFY );
Quoted 1 line · Eugenio Pérez
Some fixes that did not get in time for the last net pull request.
Jason's tree since he has some bits this depends on.
Quoted 12 lines
Eugenio Pérez (4):
vhost: Delete useless casting
vhost: convert byte order on SVQ used event write
vhost: Fix lines over 80 characters
vhost: convert byte order onavail_eventreadhw/virtio/vhost-shadow-virtqueue.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-)Signature · 1 line
2.31.1
Quoted 7 lines · Michael S. Tsirkin
Quoted 1 line · Eugenio Pérez
Some fixes that did not get in time for the last net pull request.
Reviewed-by Michael S. Tsirkin <[email protected]>Jason's tree since he has some bits this depends on.
FYI I made 2 comments/questions whether using the virtio LD/ST API isn't more appropriate here.
Quoted 8 lines · Eugenio Pérez
Some fixes that did not get in time for the last net pull request.
Eugenio Pérez (4):
vhost: Delete useless casting
vhost: convert byte order on SVQ used event write
vhost: Fix lines over 80 characters
vhost: convert byte order onavail_eventread
I've queued this for rc1.
Thanks
Quoted 8 lines
hw/virtio/vhost-shadow-virtqueue.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-)--
2.31.1
A message that is not in the archive (sent off-list or not yet received): CAJFLiB+kQ9mjy6V7uKXwoONhJ9-uiw2O3v-7WoM-B5Zaiv-jXg@mail.gmail.com
Lei Yang
Tested-byQE tries to test the parameter "event_idx=on". In both environments "virtio-vdpa + vp_vdpa" and "vhost_vdpa + vp_vdpa", there is no network connectivity issue after the guest boot up.
Quoted 32 lines
From: Jason Wang <[email protected]>
Date: Tue, Nov 1, 2022 at 10:42 AM
Subject: Re: [PATCH 0/4] Endianess and coding style fixes for SVQ event idx support
To: Eugenio Pérez <[email protected]>
Cc: <[email protected]>, Stefan Hajnoczi <[email protected]>, Michael S. Tsirkin <[email protected]>Quoted 8 lines · Eugenio Pérez
Some fixes that did not get in time for the last net pull request.
Eugenio Pérez (4):
vhost: Delete useless casting
vhost: convert byte order on SVQ used event write
vhost: Fix lines over 80 characters
vhost: convert byte order onavail_eventreadI've queued this for rc1.
Thanks
Quoted 8 lines
hw/virtio/vhost-shadow-virtqueue.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-)--
2.31.1