Add Ampere's Altra SMPro child drivers
v10 cover Add Ampere's Altra SMPro child drivers
The SMpro co-processor on Ampere Altra processor family is to monitor and report various data included hwmon-related info, RAS errors, and other miscellaneous information. The SMPro MFD driver initializes the register map and instantiates all sub-devices. All the specifics will be handled in the child drivers.
As some patches in previous version were picked, this patchset includes the remain patches which are Ampere SMpro errmon, SMPRO misc and dt bindings document for SMPro MFD driver. The errmon driver supports monitoring and reporting RAS-related errors. The misc driver supports reporting boot progress and other miscellaneous information.
Discussion for v9:
https://lore.kernel.org/lkml/[email protected]/T/
v10:
+ Revise and fix document format [Bagas]
+ Update commit message: s/This commit adds/Add/ [Bagas]
+ Use
Documentation/ABI/testing/sysfs-bus-platform-devices-ampere-smpro
[Greg]+ Drop Documentation/misc-devices/smpro-[errmon|misc].rst [Greg]
v9:
+ Fix issue when building htmldocs [Bagas]
+ Insert 'break;' to avoid fall-through [kernel test robot]
+ Update SPDX license [Greg] + Fix messy goto [Greg] + Use ATTRIBUTE_GROUPS() [Greg] + Use dev_groups instead of sysfs_create_group() to avoid user space racing issue [Greg] + Fix ugly static struct define [Greg] + Rename smpro-mfd.c to smpro-core.c [Lee Jones] + Fix include files in alphabetical order [Lee Jones] + Add defines to avoid using magic numbers [Lee Jones] + Return -EINVAL if device does not match [Lee Jones] + Remove unnecessary comment [Lee Jones] + Remove unnecessary channel info for VRD and DIMM event [Quan] + Separate error_[smpro|pmpro] to error_* and warn_* [Quan] + Add minor refactor code [Quan]
v8:
+ Insert 'break;' to avoid fall-through [kernel test robot]
+ Avoid uninitialized variable use [kernel test robot]
+ Remove unused #*_cells [Krzysztof]
+ Switch to use sysfs_emit() [Greg] + Sysfs to return single value only [Greg] + Fix KernelVerion field in Documentation/ABI/testing doc [Greg] + Change errors_* sysfs to error_* [Quan] + Add overflow_[core|mem|pcie|other]_[ce|ue] sysfs to report overflow status of each type of HW errors [Quan] + Update wording in Kconfig for smpro-errmon and smpro-misc [Quan] + Masks reserved bit when read 10-bit power value [Quan] + Add some minor refactor [Quan]
v7:
+ Add docs to Documentation/ABI/testing [Greg]
+ Re-order patches to avoid compile dependency [Lee Jones]
+ Remove regmap_acquire/release_lock() [Quan]
+ Install regmap bus->read/write() to handle multiple types of bus
access [Quan]
+ Replace i2c block read by regmap_noinc_read() [Quan]
+ Fix wrong return type of *show/store() [kernel test robot]
+ Update GPL version [Quan]
+ Add some others minor code refactor [Quan]
v6:
+ Introduced smpro-errmon, smpro-misc as smpro-mfd sub-device [Quan]
v5:
+ Introduced the smpro-mfd driver and drop the use of simple-mfd-i2c driver to avoid DT node with no resource in child device DT nodes [Rob]
+ Removed the use of reg DT property in child driver [Quan]
+ Validated ManufactureID when probing smpro-mfd drivers [Quan]
+ As child devices are instantiated by SMPro MFD driver, drop the ManufacturerID checking in child driver, ie: smpro-hwmon [Quan]
+ Revised commit messages [Quan]
v4:
+ Revised commit message [Quan]
+ Fixed build issue found by kernel test robot [Guenter]
+ Returned regmap_read() error code [Guenter]
v3:
+ Supported list of compatible string [Rob]
+ Introduced reg property in DT to specify reg offset [Rob]
+ Updated description and other minor changes in yaml file [Rob]
+ Handled negative temperature value [Guenter]
+ Returned -ENODEV if Manufacturer ID is wrong [Guenter]
+ Refactored smpro_read_string() and smpro_temp_read() [Guenter]
+ Removed smpro_write() function [Guenter]
+ Added minor refactor changes [Quan]
v2:
+ Used 'struct of_device_id's .data attribute [Lee Jones]
+ Removed "virtual" sensors [Guenter]
+ Fixed typo "mili" to "milli", "nanoWatt" to "microWatt" [Guenter]
+ Reported SOC_TDP as "Socket TDP" using max attributes [Guenter]
+ Clarified "highest" meaning in documentation [Guenter]
+ Corrected return error code when host is turn off [Guenter]
+ Reported MEM HOT Threshold for all DIMMs as temp*_crit [Guenter]
+ Removed license info as SPDX-License-Identifier existed [Guenter]
+ Added is_visible() support [Guenter]
+ Used HWMON_CHANNEL_INFO() macro and LABEL attributes [Guenter]
+ Made is_valid_id() return boolean [Guenter]
+ Returned -EPROBE_DEFER when smpro reg inaccessible [Guenter]
+ Removed unnecessary error message when dev register fail [Guenter]
+ Removed Socket TDP sensor [Quan]
+ Changed "ampere,ac01-smpro" to "ampere,smpro" [Quan]
+ Included sensor type and channel in labels [Quan]
+ Refactorized code to fix checkpatch.pl --strict complaint [Quan]
Quan Nguyen (3):
dt-bindings: mfd: Add bindings for Ampere Altra SMPro MFD driver
misc: smpro-errmon: Add Ampere's SMpro error monitor driver
misc: smpro-misc: Add Ampere's Altra SMpro misc driver
.../sysfs-bus-platform-devices-ampere-smpro | 312 +++++++++++ .../devicetree/bindings/mfd/ampere,smpro.yaml | 42 ++ drivers/misc/Kconfig | 22 + drivers/misc/Makefile | 2 + drivers/misc/smpro-errmon.c | 529 ++++++++++++++++++ drivers/misc/smpro-misc.c | 145 +++++ 6 files changed, 1052 insertions(+) create mode 100644 Documentation/ABI/testing/sysfs-bus-platform-devices-ampere-smpro create mode 100644 Documentation/devicetree/bindings/mfd/ampere,smpro.yaml create mode 100644 drivers/misc/smpro-errmon.c create mode 100644 drivers/misc/smpro-misc.c
Signature · 1 line
2.35.1
PATCH v10 1/3 dt-bindings: mfd: Add bindings for Ampere Altra SMPro MFD driver
Adds device tree bindings for SMPro MFD driver found on the Mt.Jade hardware reference platform with Ampere's Altra Processor family.
The SMpro co-processor on Ampere Altra processor family is to monitor and report various data included hwmon-related info, RAS errors, and other miscellaneous information.
---
Changes in v10:
+ None
Changes in v9:
+ Update SPDX license [Greg]
Changes in v8:
+ Removed unused #*_cells [Krzysztof]
Changes in v7:
+ None
Changes in v6:
+ None
--- .../devicetree/bindings/mfd/ampere,smpro.yaml | 42 +++++++++++++++++++ 1 file changed, 42 insertions(+) create mode 100644 Documentation/devicetree/bindings/mfd/ampere,smpro.yaml
Documentation/devicetree/bindings/mfd/ampere,smpro.yaml new file +42 -0
@@ -0,0 +1,42 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/ampere,smpro.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ampere Altra SMPro firmware driver + +maintainers: + - Quan Nguyen <[email protected]> + +description: | + Ampere Altra SMPro firmware may contain different blocks like hardware + monitoring, error monitoring and other miscellaneous features. + +properties: + compatible: + enum: + - ampere,smpro + + reg: + description: + I2C device address. + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + smpro@4f { + compatible = "ampere,smpro"; + reg = <0x4f>; + }; + };
Signature · 1 line
2.35.1
Re: [PATCH v10 1/3] dt-bindings: mfd: Add bindings for Ampere Altra SMPro MFD driver
Quoted 22 lines · Quan Nguyen
Adds device tree bindings for SMPro MFD driver found on the Mt.Jade hardware reference platform with Ampere's Altra Processor family.
The SMpro co-processor on Ampere Altra processor family is to monitor and report various data included hwmon-related info, RAS errors, and other miscellaneous information.
Signed-off-by Quan Nguyen <[email protected]>Reviewed-by Rob Herring <[email protected]>---
Changes in v10:
+ NoneChanges in v9:
+ Update SPDX license [Greg]Changes in v8:
+ Removed unused #*_cells [Krzysztof]Changes in v7:
+ None
Quoted 6 lines
Changes in v6:
+ None--- .../devicetree/bindings/mfd/ampere,smpro.yaml | 42 +++++++++++++++++++ 1 file changed, 42 insertions(+) create mode 100644 Documentation/devicetree/bindings/mfd/ampere,smpro.yaml
Applied, thanks.
Signature · 1 line
Lee Jones [李琼斯]
PATCH v10 2/3 misc: smpro-errmon: Add Ampere's SMpro error monitor driver
In reply to Quan NguyenAdd Ampere's SMpro error monitor driver for monitoring and reporting RAS-related errors as reported by SMpro co-processor found on Ampere's Altra processor family.
---
Changes in v10:
+ Fix document format [Bagas]
+ Update commit message: s/This commit adds/Add/ [Bagas]
+ Only use Documentation/ABI/ [Greg]
+ Drop Documentation/misc-devices/smpro-errmon.rst [Greg]
Changes in v9:
+ Fix ugly static struct define [Greg] + Remove unused defines and update documentation [Quan] + Add minor refactor code [Quan] + Fix messy goto [Greg] + Update SPDX licence [Greg] + Use ATTRIBUTE_GROUPS() [Greg] + Use dev_groups instead of sysfs_create_group() to avoid racing issue with user space [Greg] + Refactor code to fix unnecessary initialization issue [Quan] + Refactor code to avoid clever encoding issue [Quan] + Separate error_[smpro|pmpro] to error_* and warn_* [Quan] + Add minor code refactor [Quan]
Changes in v8:
+ Update wording for SMPRO_ERRMON on Kconfig file [Quan]
+ Avoid uninitialized variable use [kernel test robot]
+ Switch to use sysfs_emit() [Greg] + Make sysfs to return single value [Greg] + Change errors_* sysfs to error_* [Quan]
+ Add overflow_[core|mem|pcie|other]_[ce|ue] sysfs to report
overflow status of each type of HW errors [Quan]
+ Add some minor refactor [Quan]
Changes in v7:
+ Remove regmap_acquire/release_lock(), read_i2c_block_data() [Quan]
+ Use regmap_noinc_read() instead of errmon_read_block() [Quan]
+ Validate number of errors before read [Quan]
+ Fix wrong return type of *_show() function [kernel test robot]
+ Adjust patch order to avoid dependence with smpro-mfd [Lee Jones]
+ Use pointer instead of stack memory [Quan]
Changes in v6:
+ First introduced in v6 [Quan]
--- .../sysfs-bus-platform-devices-ampere-smpro | 264 +++++++++ drivers/misc/Kconfig | 12 + drivers/misc/Makefile | 1 + drivers/misc/smpro-errmon.c | 529 ++++++++++++++++++ 4 files changed, 806 insertions(+) create mode 100644 Documentation/ABI/testing/sysfs-bus-platform-devices-ampere-smpro create mode 100644 drivers/misc/smpro-errmon.c
Documentation/ABI/testing/sysfs-bus-platform-devices-ampere-smpro new file +264 -0
@@ -0,0 +1,264 @@ +What: /sys/bus/platform/devices/smpro-errmon.*/error_[core|mem|pcie|other]_[ce|ue] +KernelVersion: 6.1 +Contact: Quan Nguyen <[email protected]> +Description: + (RO) Contains the 48-byte Ampere (Vendor-Specific) Error Record printed + in hex format according to the table below: + + +--------+---------------+-------------+------------------------------------------------------------+ + | Offset | Field | Size (byte) | Description | + +--------+---------------+-------------+------------------------------------------------------------+ + | 00 | Error Type | 1 | See :ref:`the table below <smpro-error-types>` for details | + +--------+---------------+-------------+------------------------------------------------------------+ + | 01 | Subtype | 1 | See :ref:`the table below <smpro-error-types>` for details | + +--------+---------------+-------------+------------------------------------------------------------+ + | 02 | Instance | 2 | See :ref:`the table below <smpro-error-types>` for details | + +--------+---------------+-------------+------------------------------------------------------------+ + | 04 | Error status | 4 | See ARM RAS specification for details | + +--------+---------------+-------------+------------------------------------------------------------+ + | 08 | Error Address | 8 | See ARM RAS specification for details | + +--------+---------------+-------------+------------------------------------------------------------+ + | 16 | Error Misc 0 | 8 | See ARM RAS specification for details | + +--------+---------------+-------------+------------------------------------------------------------+ + | 24 | Error Misc 1 | 8 | See ARM RAS specification for details | + +--------+---------------+-------------+------------------------------------------------------------+ + | 32 | Error Misc 2 | 8 | See ARM RAS specification for details | + +--------+---------------+-------------+------------------------------------------------------------+ + | 40 | Error Misc 3 | 8 | See ARM RAS specification for details | + +--------+---------------+-------------+------------------------------------------------------------+ + + The table below defines the value of error types, their subtype, subcomponent and instance: + + .. _smpro-error-types: + + +-----------------+------------+----------+----------------+----------------------------------------+ + | Error Group | Error Type | Sub type | Sub component | Instance | + +-----------------+------------+----------+----------------+----------------------------------------+ + | CPM (core) | 0 | 0 | Snoop-Logic | CPM # | + +-----------------+------------+----------+----------------+----------------------------------------+ + | CPM (core) | 0 | 2 | Armv8 Core 1 | CPM # | + +-----------------+------------+----------+----------------+----------------------------------------+ + | MCU (mem) | 1 | 1 | ERR1 | MCU # \| SLOT << 11 | + +-----------------+------------+----------+----------------+----------------------------------------+ + | MCU (mem) | 1 | 2 | ERR2 | MCU # \| SLOT << 11 | + +-----------------+------------+----------+----------------+----------------------------------------+ + | MCU (mem) | 1 | 3 | ERR3 | MCU # | + +-----------------+------------+----------+----------------+----------------------------------------+ + | MCU (mem) | 1 | 4 | ERR4 | MCU # | + +-----------------+------------+----------+----------------+----------------------------------------+ + | MCU (mem) | 1 | 5 | ERR5 | MCU # | + +-----------------+------------+----------+----------------+----------------------------------------+ + | MCU (mem) | 1 | 6 | ERR6 | MCU # | + +-----------------+------------+----------+----------------+----------------------------------------+ + | MCU (mem) | 1 | 7 | Link Error | MCU # | + +-----------------+------------+----------+----------------+----------------------------------------+ + | Mesh (other) | 2 | 0 | Cross Point | X \| (Y << 5) \| NS <<11 | + +-----------------+------------+----------+----------------+----------------------------------------+ + | Mesh (other) | 2 | 1 | Home Node(IO) | X \| (Y << 5) \| NS <<11 | + +-----------------+------------+----------+----------------+----------------------------------------+ + | Mesh (other) | 2 | 2 | Home Node(Mem) | X \| (Y << 5) \| NS <<11 \| device<<12 | + +-----------------+------------+----------+----------------+----------------------------------------+ + | Mesh (other) | 2 | 4 | CCIX Node | X \| (Y << 5) \| NS <<11 | + +-----------------+------------+----------+----------------+----------------------------------------+ + | 2P Link (other) | 3 | 0 | N/A | Altra 2P Link # | + +-----------------+------------+----------+----------------+----------------------------------------+ + | GIC (other) | 5 | 0 | ERR0 | 0 | + +-----------------+------------+----------+----------------+----------------------------------------+ + | GIC (other) | 5 | 1 | ERR1 | 0 | + +-----------------+------------+----------+----------------+----------------------------------------+ + | GIC (other) | 5 | 2 | ERR2 | 0 | + +-----------------+------------+----------+----------------+----------------------------------------+ + | GIC (other) | 5 | 3 | ERR3 | 0 | + +-----------------+------------+----------+----------------+----------------------------------------+ + | GIC (other) | 5 | 4 | ERR4 | 0 | + +-----------------+------------+----------+----------------+----------------------------------------+ + | GIC (other) | 5 | 5 | ERR5 | 0 | + +-----------------+------------+----------+----------------+----------------------------------------+ + | GIC (other) | 5 | 6 | ERR6 | 0 | + +-----------------+------------+----------+----------------+----------------------------------------+ + | GIC (other) | 5 | 7 | ERR7 | 0 | + +-----------------+------------+----------+----------------+----------------------------------------+ + | GIC (other) | 5 | 8 | ERR8 | 0 | + +-----------------+------------+----------+----------------+----------------------------------------+ + | GIC (other) | 5 | 9 | ERR9 | 0 | + +-----------------+------------+----------+----------------+----------------------------------------+ + | GIC (other) | 5 | 10 | ERR10 | 0 | + +-----------------+------------+----------+----------------+----------------------------------------+ + | GIC (other) | 5 | 11 | ERR11 | 0 | + +-----------------+------------+----------+----------------+----------------------------------------+ + | GIC (other) | 5 | 12 | ERR12 | 0 | + +-----------------+------------+----------+----------------+----------------------------------------+ + | GIC (other) | 5 | 13-21 | ERR13 | RC # + 1 | + +-----------------+------------+----------+----------------+----------------------------------------+ + | SMMU (other) | 6 | TCU | 100 | RC # | + +-----------------+------------+----------+----------------+----------------------------------------+ + | SMMU (other) | 6 | TBU0 | 0 | RC # | + +-----------------+------------+----------+----------------+----------------------------------------+ + | SMMU (other) | 6 | TBU1 | 1 | RC # | + +-----------------+------------+----------+----------------+----------------------------------------+ + | SMMU (other) | 6 | TBU2 | 2 | RC # | + +-----------------+------------+----------+----------------+----------------------------------------+ + | SMMU (other) | 6 | TBU3 | 3 | RC # | + +-----------------+------------+----------+----------------+----------------------------------------+ + | SMMU (other) | 6 | TBU4 | 4 | RC # | + +-----------------+------------+----------+----------------+----------------------------------------+ + | SMMU (other) | 6 | TBU5 | 5 | RC # | + +-----------------+------------+----------+----------------+----------------------------------------+ + | SMMU (other) | 6 | TBU6 | 6 | RC # | + +-----------------+------------+----------+----------------+----------------------------------------+ + | SMMU (other) | 6 | TBU7 | 7 | RC # | + +-----------------+------------+----------+----------------+----------------------------------------+ + | SMMU (other) | 6 | TBU8 | 8 | RC # | + +-----------------+------------+----------+----------------+----------------------------------------+ + | SMMU (other) | 6 | TBU9 | 9 | RC # | + +-----------------+------------+----------+----------------+----------------------------------------+ + | PCIe AER (pcie) | 7 | Root | 0 | RC # | + +-----------------+------------+----------+----------------+----------------------------------------+ + | PCIe AER (pcie) | 7 | Device | 1 | RC # | + +-----------------+------------+----------+----------------+----------------------------------------+ + | PCIe RC (pcie) | 8 | RCA HB | 0 | RC # | + +-----------------+------------+----------+----------------+----------------------------------------+ + | PCIe RC (pcie) | 8 | RCB HB | 1 | RC # | + +-----------------+------------+----------+----------------+----------------------------------------+ + | PCIe RC (pcie) | 8 | RASDP | 8 | RC # | + +-----------------+------------+----------+----------------+----------------------------------------+ + | OCM (other) | 9 | ERR0 | 0 | 0 | + +-----------------+------------+----------+----------------+----------------------------------------+ + | OCM (other) | 9 | ERR1 | 1 | 0 | + +-----------------+------------+----------+----------------+----------------------------------------+ + | OCM (other) | 9 | ERR2 | 2 | 0 | + +-----------------+------------+----------+----------------+----------------------------------------+ + | SMpro (other) | 10 | ERR0 | 0 | 0 | + +-----------------+------------+----------+----------------+----------------------------------------+ + | SMpro (other) | 10 | ERR1 | 1 | 0 | + +-----------------+------------+----------+----------------+----------------------------------------+ + | SMpro (other) | 10 | MPA_ERR | 2 | 0 | + +-----------------+------------+----------+----------------+----------------------------------------+ + | PMpro (other) | 11 | ERR0 | 0 | 0 | + +-----------------+------------+----------+----------------+----------------------------------------+ + | PMpro (other) | 11 | ERR1 | 1 | 0 | + +-----------------+------------+----------+----------------+----------------------------------------+ + | PMpro (other) | 11 | MPA_ERR | 2 | 0 | + +-----------------+------------+----------+----------------+----------------------------------------+ + + Example:: + + # cat error_other_ue + 880807001e004010401040101500000001004010401040100c0000000000000000000000000000000000000000000000 + + The detail of each sysfs entries is as below: + + +-------------+---------------------------------------------------------+----------------------------------+ + | Error | Sysfs entry | Description (when triggered) | + +-------------+---------------------------------------------------------+----------------------------------+ + | Core's CE | /sys/bus/platform/devices/smpro-errmon.*/error_core_ce | Core has CE error | + +-------------+---------------------------------------------------------+----------------------------------+ + | Core's UE | /sys/bus/platform/devices/smpro-errmon.*/error_core_ue | Core has UE error | + +-------------+---------------------------------------------------------+----------------------------------+ + | Memory's CE | /sys/bus/platform/devices/smpro-errmon.*/error_mem_ce | Memory has CE error | + +-------------+---------------------------------------------------------+----------------------------------+ + | Memory's UE | /sys/bus/platform/devices/smpro-errmon.*/error_mem_ue | Memory has UE error | + +-------------+---------------------------------------------------------+----------------------------------+ + | PCIe's CE | /sys/bus/platform/devices/smpro-errmon.*/error_pcie_ce | any PCIe controller has CE error | + +-------------+---------------------------------------------------------+----------------------------------+ + | PCIe's UE | /sys/bus/platform/devices/smpro-errmon.*/error_pcie_ue | any PCIe controller has UE error | + +-------------+---------------------------------------------------------+----------------------------------+ + | Other's CE | /sys/bus/platform/devices/smpro-errmon.*/error_other_ce | any other CE error | + +-------------+---------------------------------------------------------+----------------------------------+ + | Other's UE | /sys/bus/platform/devices/smpro-errmon.*/error_other_ue | any other UE error | + +-------------+---------------------------------------------------------+----------------------------------+ + + UE: Uncorrect-able Error + CE: Correct-able Error + + For details, see section `3.3 Ampere (Vendor-Specific) Error Record Formats, + Altra Family RAS Supplement`. + + +What: /sys/bus/platform/devices/smpro-errmon.*/overflow_[core|mem|pcie|other]_[ce|ue] +KernelVersion: 6.1 +Contact: Quan Nguyen <[email protected]> +Description: + (RO) Return the overflow status of each type HW error reported: + + - 0 : No overflow + - 1 : There is an overflow and the oldest HW errors are dropped + + The detail of each sysfs entries is as below: + + +-------------+-----------------------------------------------------------+---------------------------------------+ + | Overflow | Sysfs entry | Description | + +-------------+-----------------------------------------------------------+---------------------------------------+ + | Core's CE | /sys/bus/platform/devices/smpro-errmon.*/overflow_core_ce | Core CE error overflow | + +-------------+-----------------------------------------------------------+---------------------------------------+ + | Core's UE | /sys/bus/platform/devices/smpro-errmon.*/overflow_core_ue | Core UE error overflow | + +-------------+-----------------------------------------------------------+---------------------------------------+ + | Memory's CE | /sys/bus/platform/devices/smpro-errmon.*/overflow_mem_ce | Memory CE error overflow | + +-------------+-----------------------------------------------------------+---------------------------------------+ + | Memory's UE | /sys/bus/platform/devices/smpro-errmon.*/overflow_mem_ue | Memory UE error overflow | + +-------------+-----------------------------------------------------------+---------------------------------------+ + | PCIe's CE | /sys/bus/platform/devices/smpro-errmon.*/overflow_pcie_ce | any PCIe controller CE error overflow | + +-------------+-----------------------------------------------------------+---------------------------------------+ + | PCIe's UE | /sys/bus/platform/devices/smpro-errmon.*/overflow_pcie_ue | any PCIe controller UE error overflow | + +-------------+-----------------------------------------------------------+---------------------------------------+ + | Other's CE | /sys/bus/platform/devices/smpro-errmon.*/overflow_other_ce| any other CE error overflow | + +-------------+-----------------------------------------------------------+---------------------------------------+ + | Other's UE | /sys/bus/platform/devices/smpro-errmon.*/overflow_other_ue| other UE error overflow | + +-------------+-----------------------------------------------------------+---------------------------------------+ + + where: + + - UE: Uncorrect-able Error + - CE: Correct-able Error + +What: /sys/bus/platform/devices/smpro-errmon.*/[error|warn]_[smpro|pmpro] +KernelVersion: 6.1 +Contact: Quan Nguyen <[email protected]> +Description: + (RO) Contains the internal firmware error/warning printed as hex format. + + The detail of each sysfs entries is as below: + + +---------------+------------------------------------------------------+--------------------------+ + | Error | Sysfs entry | Description | + +---------------+------------------------------------------------------+--------------------------+ + | SMpro error | /sys/bus/platform/devices/smpro-errmon.*/error_smpro | system has SMpro error | + +---------------+------------------------------------------------------+--------------------------+ + | SMpro warning | /sys/bus/platform/devices/smpro-errmon.*/warn_smpro | system has SMpro warning | + +---------------+------------------------------------------------------+--------------------------+ + | PMpro error | /sys/bus/platform/devices/smpro-errmon.*/error_pmpro | system has PMpro error | + +---------------+------------------------------------------------------+--------------------------+ + | PMpro warning | /sys/bus/platform/devices/smpro-errmon.*/warn_pmpro | system has PMpro warning | + +---------------+------------------------------------------------------+--------------------------+ + + For details, see section `5.10 RAS Internal Error Register Definitions, + Altra Family Soc BMC Interface Specification`. + +What: /sys/bus/platform/devices/smpro-errmon.*/event_[vrd_warn_fault|vrd_hot|dimm_hot] +KernelVersion: 6.1 +Contact: Quan Nguyen <[email protected]> +Description: + (RO) Contains the detail information in case of VRD/DIMM warning/hot events + in hex format as below:: + + AAAA + + where: + + - ``AAAA``: The event detail information data + + The detail of each sysfs entries is as below: + + +---------------+---------------------------------------------------------------+---------------------+ + | Event | Sysfs entry | Description | + +---------------+---------------------------------------------------------------+---------------------+ + | VRD HOT | /sys/bus/platform/devices/smpro-errmon.*/event_vrd_hot | VRD Hot | + +---------------+---------------------------------------------------------------+---------------------+ + | VR Warn/Fault | /sys/bus/platform/devices/smpro-errmon.*/event_vrd_warn_fault | VR Warning or Fault | + +---------------+---------------------------------------------------------------+---------------------+ + | DIMM HOT | /sys/bus/platform/devices/smpro-errmon.*/event_dimm_hot | DIMM Hot | + +---------------+---------------------------------------------------------------+---------------------+ + + For more details, see section `5.7 GPI Status Registers, + Altra Family Soc BMC Interface Specification`. +
drivers/misc/Kconfig +12 -0
@@ -176,6 +176,18 @@ config SGI_XP this feature will allow for direct communication between SSIs based on a network adapter and DMA messaging. +config SMPRO_ERRMON + tristate "Ampere Computing SMPro error monitor driver" + depends on MFD_SMPRO || COMPILE_TEST + help + Say Y here to get support for the SMpro error monitor function + provided by Ampere Computing's Altra and Altra Max SoCs. Upon + loading, the driver creates sysfs files which can be use to gather + multiple HW error data reported via read and write system calls. + + To compile this driver as a module, say M here. The driver will be + called smpro-errmon. + config CS5535_MFGPT tristate "CS5535/CS5536 Geode Multi-Function General Purpose Timer (MFGPT) support" depends on MFD_CS5535
drivers/misc/Makefile +1 -0
@@ -23,6 +23,7 @@ obj-$(CONFIG_ENCLOSURE_SERVICES) += enclosure.o obj-$(CONFIG_KGDB_TESTS) += kgdbts.o obj-$(CONFIG_SGI_XP) += sgi-xp/ obj-$(CONFIG_SGI_GRU) += sgi-gru/ +obj-$(CONFIG_SMPRO_ERRMON) += smpro-errmon.o obj-$(CONFIG_CS5535_MFGPT) += cs5535-mfgpt.o obj-$(CONFIG_GEHC_ACHC) += gehc-achc.o obj-$(CONFIG_HP_ILO) += hpilo.o
drivers/misc/smpro-errmon.c new file +529 -0
529 lines not on this page · raw message
Signature · 1 line
2.35.1
PATCH v10 3/3 misc: smpro-misc: Add Ampere's Altra SMpro misc driver
In reply to Quan NguyenAdd driver support for accessing various information reported by Ampere's SMpro co-processor such as Boot Progress and other miscellaneous data.
---
Changes in v10:
+ Fix document format [Bagas]
+ Update commit message: s/This commit adds/Add/ [Bagas]
+ Only use Documentation/ABI/ [Greg]
+ Drop Documentation/misc-devices/smpro-misc.rst [Greg]
Changes in v9:
+ Update SPDX licence [Greg]
+ Use ATTRIBUTE_GROUPS() [Greg]
+ Use dev_groups instead of sysfs_create_group() to avoid
racing issue with user space [Greg]
+ Refactor code to avoid clever encoding issue [Quan]
Changes in v8:
+ Update wording for SMPRO_MISC in Kconfig file [Quan]
+ Switch to use sysfs_emit() [Quan]
Changes in v7:
+ Fix wrong return type of *_show/store()
functions [kernel robot test]
+ Adjust patch order to remove dependence with
smpro-mfd [Lee Jones]
Changes in v6:
+ First introduced in v6 [Quan]
--- .../sysfs-bus-platform-devices-ampere-smpro | 48 ++++++ drivers/misc/Kconfig | 10 ++ drivers/misc/Makefile | 1 + drivers/misc/smpro-misc.c | 145 ++++++++++++++++++ 4 files changed, 204 insertions(+) create mode 100644 drivers/misc/smpro-misc.c
Documentation/ABI/testing/sysfs-bus-platform-devices-ampere-smpro +48 -0
@@ -262,3 +262,51 @@ Description: For more details, see section `5.7 GPI Status Registers, Altra Family Soc BMC Interface Specification`. +What: /sys/bus/platform/devices/smpro-misc.*/boot_progress +KernelVersion: 6.1 +Contact: Quan Nguyen <[email protected]> +Description: + (RO) Contains the boot stages information in hex as format below:: + + AABBCCCCCCCC + + where: + + - ``AA`` : The boot stages + + - 00: SMpro firmware booting + - 01: PMpro firmware booting + - 02: ATF BL1 firmware booting + - 03: DDR initialization + - 04: DDR training report status + - 05: ATF BL2 firmware booting + - 06: ATF BL31 firmware booting + - 07: ATF BL32 firmware booting + - 08: UEFI firmware booting + - 09: OS booting + + - ``BB`` : Boot status + + - 00: Not started + - 01: Started + - 02: Completed without error + - 03: Failed. + + - ``CCCCCCCC``: Boot status information defined for each boot stages + + For details, see section `5.11 Boot Stage Register Definitions` + and section `6. Processor Boot Progress Codes, Altra Family Soc BMC + Interface Specification`. + + +What: /sys/bus/platform/devices/smpro-misc*/soc_power_limit +KernelVersion: 6.1 +Contact: Quan Nguyen <[email protected]> +Description: + (RW) Contains the desired SoC power limit in Watt. + Writes to this sysfs set the desired SoC power limit (W). + Reads from this register return the current SoC power limit (W). + The value ranges: + + - Minimum: 120 W + - Maximum: Socket TDP power
drivers/misc/Kconfig +10 -0
@@ -188,6 +188,16 @@ config SMPRO_ERRMON To compile this driver as a module, say M here. The driver will be called smpro-errmon. +config SMPRO_MISC + tristate "Ampere Computing SMPro miscellaneous driver" + depends on MFD_SMPRO || COMPILE_TEST + help + Say Y here to get support for the SMpro error miscellalenous function + provided by Ampere Computing's Altra and Altra Max SoCs. + + To compile this driver as a module, say M here. The driver will be + called smpro-misc. + config CS5535_MFGPT tristate "CS5535/CS5536 Geode Multi-Function General Purpose Timer (MFGPT) support" depends on MFD_CS5535
drivers/misc/Makefile +1 -0
@@ -24,6 +24,7 @@ obj-$(CONFIG_KGDB_TESTS) += kgdbts.o obj-$(CONFIG_SGI_XP) += sgi-xp/ obj-$(CONFIG_SGI_GRU) += sgi-gru/ obj-$(CONFIG_SMPRO_ERRMON) += smpro-errmon.o +obj-$(CONFIG_SMPRO_MISC) += smpro-misc.o obj-$(CONFIG_CS5535_MFGPT) += cs5535-mfgpt.o obj-$(CONFIG_GEHC_ACHC) += gehc-achc.o obj-$(CONFIG_HP_ILO) += hpilo.o
drivers/misc/smpro-misc.c new file +145 -0
145 lines not on this page · raw message
Signature · 1 line
2.35.1
Dear Joel,
As this patch set was all accepted in linux-next tree, May you help to pick them to your openbmc/linux dev-6.0 branch?
The list of commits is as below (as some was picked in v9 and the remain was picked in v10):
+ https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?h=next-20221115&id=072b9545e5cf470eea01f8e59c3dbd4b81181a2e
+ https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?h=next-20221115&id=026d99699101db523f444d0fc3dddb75fef42594
+ https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?h=next-20221115&id=4a4a4e9ebaa3ce903a3cdf8bb173eeaf87828cea
+ https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?h=next-20221115&id=763dc90e9a4332f82ad43c866c6878742b15d4ab
+ https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?h=next-20221115&id=2202e8df80936fa0d92d49cc7db1562e7772308e
+ https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?h=next-20221115&id=c157f6e8ea2e61ab72f85567f37faa4711c291d7
+ https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?h=next-20221115&id=37618918f6c7219e1bfb86e4c3fe7834092643d0
Thank you for the help.
- Quan
Quoted 130 lines · Quan Nguyen
The SMpro co-processor on Ampere Altra processor family is to monitor and report various data included hwmon-related info, RAS errors, and other miscellaneous information. The SMPro MFD driver initializes the register map and instantiates all sub-devices. All the specifics will be handled in the child drivers.
As some patches in previous version were picked, this patchset includes the remain patches which are Ampere SMpro errmon, SMPRO misc and dt bindings document for SMPro MFD driver. The errmon driver supports monitoring and reporting RAS-related errors. The misc driver supports reporting boot progress and other miscellaneous information.
Discussion for v9:
https://lore.kernel.org/lkml/[email protected]/T/v10:
+ Revise and fix document format [Bagas]
+ Update commit message: s/This commit adds/Add/ [Bagas]
+ UseDocumentation/ABI/testing/sysfs-bus-platform-devices-ampere-smpro [Greg]+ Drop Documentation/misc-devices/smpro-[errmon|misc].rst [Greg]
v9:
+ Fix issue when building htmldocs [Bagas]
+ Insert 'break;' to avoid fall-through [kernel test robot]+ Update SPDX license [Greg] + Fix messy goto [Greg] + Use ATTRIBUTE_GROUPS() [Greg] + Use dev_groups instead of sysfs_create_group() to avoid user space racing issue [Greg] + Fix ugly static struct define [Greg] + Rename smpro-mfd.c to smpro-core.c [Lee Jones] + Fix include files in alphabetical order [Lee Jones] + Add defines to avoid using magic numbers [Lee Jones] + Return -EINVAL if device does not match [Lee Jones] + Remove unnecessary comment [Lee Jones] + Remove unnecessary channel info for VRD and DIMM event [Quan] + Separate error_[smpro|pmpro] to error_* and warn_* [Quan] + Add minor refactor code [Quan]v8:
+ Insert 'break;' to avoid fall-through [kernel test robot]
+ Avoid uninitialized variable use [kernel test robot]
+ Remove unused #*_cells [Krzysztof]+ Switch to use sysfs_emit() [Greg] + Sysfs to return single value only [Greg] + Fix KernelVerion field in Documentation/ABI/testing doc [Greg] + Change errors_* sysfs to error_* [Quan] + Add overflow_[core|mem|pcie|other]_[ce|ue] sysfs to report overflow status of each type of HW errors [Quan] + Update wording in Kconfig for smpro-errmon and smpro-misc [Quan] + Masks reserved bit when read 10-bit power value [Quan] + Add some minor refactor [Quan]v7:
+ Add docs toDocumentation/ABI/testing[Greg]
+ Re-order patches to avoid compile dependency [Lee Jones]
+ Remove regmap_acquire/release_lock() [Quan]
+ Install regmap bus->read/write() to handle multiple types of bus
access [Quan]
+ Replace i2c block read byregmap_noinc_read()[Quan]
+ Fix wrong return type of *show/store() [kernel test robot]
+ Update GPL version [Quan]
+ Add some others minor code refactor [Quan]v6:
+ Introduced smpro-errmon, smpro-misc as smpro-mfd sub-device [Quan]v5:
+ Introduced the smpro-mfd driver and drop the use of simple-mfd-i2c driver to avoid DT node with no resource in child device DT nodes [Rob]
+ Removed the use of reg DT property in child driver [Quan]
+ Validated ManufactureID when probing smpro-mfd drivers [Quan]
+ As child devices are instantiated by SMPro MFD driver, drop the ManufacturerID checking in child driver, ie: smpro-hwmon [Quan]
+ Revised commit messages [Quan]v4:
+ Revised commit message [Quan]
+ Fixed build issue found by kernel test robot [Guenter]
+ Returnedregmap_read()error code [Guenter]v3:
+ Supported list of compatible string [Rob]
+ Introduced reg property in DT to specify reg offset [Rob]
+ Updated description and other minor changes in yaml file [Rob]
+ Handled negative temperature value [Guenter]
+ Returned-ENODEVif Manufacturer ID is wrong [Guenter]
+ Refactoredsmpro_read_string()andsmpro_temp_read()[Guenter]
+ Removedsmpro_write()function [Guenter]
+ Added minor refactor changes [Quan]v2:
+ Used 'struct of_device_id's .data attribute [Lee Jones]
+ Removed "virtual" sensors [Guenter]
+ Fixed typo "mili" to "milli", "nanoWatt" to "microWatt" [Guenter]
+ ReportedSOC_TDPas "Socket TDP" using max attributes [Guenter]
+ Clarified "highest" meaning in documentation [Guenter]
+ Corrected return error code when host is turn off [Guenter]
+ Reported MEM HOT Threshold for all DIMMs as temp*_crit [Guenter]
+ Removed license info as SPDX-License-Identifier existed [Guenter]
+ Addedis_visible()support [Guenter]
+ UsedHWMON_CHANNEL_INFO()macro and LABEL attributes [Guenter]
+ Madeis_valid_id()return boolean [Guenter]
+ Returned -EPROBE_DEFER when smpro reg inaccessible [Guenter]
+ Removed unnecessary error message when dev register fail [Guenter]
+ Removed Socket TDP sensor [Quan]
+ Changed "ampere,ac01-smpro" to "ampere,smpro" [Quan]
+ Included sensor type and channel in labels [Quan]
+ Refactorized code to fix checkpatch.pl --strict complaint [Quan]Quan Nguyen (3):
dt-bindings: mfd: Add bindings for Ampere Altra SMPro MFD driver
misc: smpro-errmon: Add Ampere's SMpro error monitor driver
misc: smpro-misc: Add Ampere's Altra SMpro misc driver.../sysfs-bus-platform-devices-ampere-smpro | 312 +++++++++++ .../devicetree/bindings/mfd/ampere,smpro.yaml | 42 ++ drivers/misc/Kconfig | 22 + drivers/misc/Makefile | 2 + drivers/misc/smpro-errmon.c | 529 ++++++++++++++++++ drivers/misc/smpro-misc.c | 145 +++++ 6 files changed, 1052 insertions(+)create mode 100644
Documentation/ABI/testing/sysfs-bus-platform-devices-ampere-smprocreate mode 100644Documentation/devicetree/bindings/mfd/ampere,smpro.yamlcreate mode 100644drivers/misc/smpro-errmon.c
create mode 100644drivers/misc/smpro-misc.c
Quoted 5 lines · Quan Nguyen
Dear Joel,
As this patch set was all accepted in linux-next tree, May you help to pick them to your openbmc/linux dev-6.0 branch?
Done. Great work, well done.
Cheers,
Joel
Quoted 154 lines
The list of commits is as below (as some was picked in v9 and the remain was picked in v10):
+
https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?h=next-20221115&id=072b9545e5cf470eea01f8e59c3dbd4b81181a2e
+
https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?h=next-20221115&id=026d99699101db523f444d0fc3dddb75fef42594
+
https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?h=next-20221115&id=4a4a4e9ebaa3ce903a3cdf8bb173eeaf87828cea
+
https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?h=next-20221115&id=763dc90e9a4332f82ad43c866c6878742b15d4ab
+
https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?h=next-20221115&id=2202e8df80936fa0d92d49cc7db1562e7772308e
+
https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?h=next-20221115&id=c157f6e8ea2e61ab72f85567f37faa4711c291d7
+
https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?h=next-20221115&id=37618918f6c7219e1bfb86e4c3fe7834092643d0Thank you for the help.
- QuanQuoted 130 lines · Quan Nguyen
The SMpro co-processor on Ampere Altra processor family is to monitor and report various data included hwmon-related info, RAS errors, and other miscellaneous information. The SMPro MFD driver initializes the register map and instantiates all sub-devices. All the specifics will be handled in the child drivers.
As some patches in previous version were picked, this patchset includes the remain patches which are Ampere SMpro errmon, SMPRO misc and dt bindings document for SMPro MFD driver. The errmon driver supports monitoring and reporting RAS-related errors. The misc driver supports reporting boot progress and other miscellaneous information.
Discussion for v9:
https://lore.kernel.org/lkml/[email protected]/T/v10:
+ Revise and fix document format [Bagas]
+ Update commit message: s/This commit adds/Add/ [Bagas]
+ UseDocumentation/ABI/testing/sysfs-bus-platform-devices-ampere-smpro [Greg]+ Drop Documentation/misc-devices/smpro-[errmon|misc].rst [Greg]
v9:
+ Fix issue when building htmldocs [Bagas]
+ Insert 'break;' to avoid fall-through [kernel test robot]+ Update SPDX license [Greg] + Fix messy goto [Greg] + Use ATTRIBUTE_GROUPS() [Greg] + Use dev_groups instead of sysfs_create_group() to avoid user space racing issue [Greg] + Fix ugly static struct define [Greg] + Rename smpro-mfd.c to smpro-core.c [Lee Jones] + Fix include files in alphabetical order [Lee Jones] + Add defines to avoid using magic numbers [Lee Jones] + Return -EINVAL if device does not match [Lee Jones] + Remove unnecessary comment [Lee Jones] + Remove unnecessary channel info for VRD and DIMM event [Quan] + Separate error_[smpro|pmpro] to error_* and warn_* [Quan] + Add minor refactor code [Quan]v8:
+ Insert 'break;' to avoid fall-through [kernel test robot]
+ Avoid uninitialized variable use [kernel test robot]
+ Remove unused #*_cells [Krzysztof]+ Switch to use sysfs_emit() [Greg] + Sysfs to return single value only [Greg] + Fix KernelVerion field in Documentation/ABI/testing doc [Greg] + Change errors_* sysfs to error_* [Quan] + Add overflow_[core|mem|pcie|other]_[ce|ue] sysfs to report overflow status of each type of HW errors [Quan] + Update wording in Kconfig for smpro-errmon and smpro-misc [Quan] + Masks reserved bit when read 10-bit power value [Quan] + Add some minor refactor [Quan]v7:
+ Add docs toDocumentation/ABI/testing[Greg]
+ Re-order patches to avoid compile dependency [Lee Jones]
+ Remove regmap_acquire/release_lock() [Quan]
+ Install regmap bus->read/write() to handle multiple types of bus
access [Quan]
+ Replace i2c block read byregmap_noinc_read()[Quan]
+ Fix wrong return type of *show/store() [kernel test robot]
+ Update GPL version [Quan]
+ Add some others minor code refactor [Quan]v6:
+ Introduced smpro-errmon, smpro-misc as smpro-mfd sub-device [Quan]v5:
+ Introduced the smpro-mfd driver and drop the use of simple-mfd-i2c driver to avoid DT node with no resource in child device DT nodes [Rob]
+ Removed the use of reg DT property in child driver [Quan]
+ Validated ManufactureID when probing smpro-mfd drivers [Quan]
+ As child devices are instantiated by SMPro MFD driver, drop the ManufacturerID checking in child driver, ie: smpro-hwmon [Quan]
+ Revised commit messages [Quan]v4:
+ Revised commit message [Quan]
+ Fixed build issue found by kernel test robot [Guenter]
+ Returnedregmap_read()error code [Guenter]v3:
+ Supported list of compatible string [Rob]
+ Introduced reg property in DT to specify reg offset [Rob]
+ Updated description and other minor changes in yaml file [Rob]
+ Handled negative temperature value [Guenter]
+ Returned-ENODEVif Manufacturer ID is wrong [Guenter]
+ Refactoredsmpro_read_string()andsmpro_temp_read()[Guenter]
+ Removedsmpro_write()function [Guenter]
+ Added minor refactor changes [Quan]v2:
+ Used 'struct of_device_id's .data attribute [Lee Jones]
+ Removed "virtual" sensors [Guenter]
+ Fixed typo "mili" to "milli", "nanoWatt" to "microWatt" [Guenter]
+ ReportedSOC_TDPas "Socket TDP" using max attributes [Guenter]
+ Clarified "highest" meaning in documentation [Guenter]
+ Corrected return error code when host is turn off [Guenter]
+ Reported MEM HOT Threshold for all DIMMs as temp*_crit [Guenter]
+ Removed license info as SPDX-License-Identifier existed [Guenter]
+ Addedis_visible()support [Guenter]
+ UsedHWMON_CHANNEL_INFO()macro and LABEL attributes [Guenter]
+ Madeis_valid_id()return boolean [Guenter]
+ Returned -EPROBE_DEFER when smpro reg inaccessible [Guenter]
+ Removed unnecessary error message when dev register fail [Guenter]
+ Removed Socket TDP sensor [Quan]
+ Changed "ampere,ac01-smpro" to "ampere,smpro" [Quan]
+ Included sensor type and channel in labels [Quan]
+ Refactorized code to fix checkpatch.pl --strict complaint [Quan]Quan Nguyen (3):
dt-bindings: mfd: Add bindings for Ampere Altra SMPro MFD driver
misc: smpro-errmon: Add Ampere's SMpro error monitor driver
misc: smpro-misc: Add Ampere's Altra SMpro misc driver.../sysfs-bus-platform-devices-ampere-smpro | 312 +++++++++++ .../devicetree/bindings/mfd/ampere,smpro.yaml | 42 ++ drivers/misc/Kconfig | 22 + drivers/misc/Makefile | 2 + drivers/misc/smpro-errmon.c | 529 ++++++++++++++++++ drivers/misc/smpro-misc.c | 145 +++++ 6 files changed, 1052 insertions(+)create mode 100644
Documentation/ABI/testing/sysfs-bus-platform-devices-ampere-smprocreate mode 100644Documentation/devicetree/bindings/mfd/ampere,smpro.yamlcreate mode 100644drivers/misc/smpro-errmon.c
create mode 100644drivers/misc/smpro-misc.c
Quoted 12 lines · Joel Stanley
Quoted 5 lines · Quan Nguyen
Dear Joel,
As this patch set was all accepted in linux-next tree, May you help to pick them to your openbmc/linux dev-6.0 branch?
Done. Great work, well done.
Cheers,
Thanks a lot for the help.
- Quan
Quoted 155 lines
Quoted 155 lines
The list of commits is as below (as some was picked in v9 and the remain was picked in v10):
+
https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?h=next-20221115&id=072b9545e5cf470eea01f8e59c3dbd4b81181a2e
+
https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?h=next-20221115&id=026d99699101db523f444d0fc3dddb75fef42594
+
https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?h=next-20221115&id=4a4a4e9ebaa3ce903a3cdf8bb173eeaf87828cea
+
https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?h=next-20221115&id=763dc90e9a4332f82ad43c866c6878742b15d4ab
+
https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?h=next-20221115&id=2202e8df80936fa0d92d49cc7db1562e7772308e
+
https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?h=next-20221115&id=c157f6e8ea2e61ab72f85567f37faa4711c291d7
+
https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?h=next-20221115&id=37618918f6c7219e1bfb86e4c3fe7834092643d0Thank you for the help.
- QuanQuoted 130 lines · Quan Nguyen
The SMpro co-processor on Ampere Altra processor family is to monitor and report various data included hwmon-related info, RAS errors, and other miscellaneous information. The SMPro MFD driver initializes the register map and instantiates all sub-devices. All the specifics will be handled in the child drivers.
As some patches in previous version were picked, this patchset includes the remain patches which are Ampere SMpro errmon, SMPRO misc and dt bindings document for SMPro MFD driver. The errmon driver supports monitoring and reporting RAS-related errors. The misc driver supports reporting boot progress and other miscellaneous information.
Discussion for v9:
https://lore.kernel.org/lkml/[email protected]/T/v10:
+ Revise and fix document format [Bagas]
+ Update commit message: s/This commit adds/Add/ [Bagas]
+ UseDocumentation/ABI/testing/sysfs-bus-platform-devices-ampere-smpro[Greg]
+ Drop Documentation/misc-devices/smpro-[errmon|misc].rst [Greg]v9:
+ Fix issue when building htmldocs [Bagas]
+ Insert 'break;' to avoid fall-through [kernel test robot]
+ Update SPDX license [Greg]
+ Fix messy goto [Greg]
+ UseATTRIBUTE_GROUPS()[Greg]
+ Usedev_groupsinstead ofsysfs_create_group()to avoid
user space racing issue [Greg]
+ Fix ugly static struct define [Greg]
+ Renamesmpro-mfd.ctosmpro-core.c[Lee Jones]
+ Fix include files in alphabetical order [Lee Jones]
+ Add defines to avoid using magic numbers [Lee Jones]
+ Return-EINVALif device does not match [Lee Jones]
+ Remove unnecessary comment [Lee Jones]
+ Remove unnecessary channel info for VRD and DIMM event [Quan]
+ Separate error_[smpro|pmpro] to error_* and warn_* [Quan]
+ Add minor refactor code [Quan]v8:
+ Insert 'break;' to avoid fall-through [kernel test robot]
+ Avoid uninitialized variable use [kernel test robot]
+ Remove unused #*_cells [Krzysztof]
+ Switch to usesysfs_emit()[Greg]
+ Sysfs to return single value only [Greg]
+ Fix KernelVerion field inDocumentation/ABI/testingdoc [Greg]
+ Change errors_* sysfs to error_* [Quan]
+ Add overflow_[core|mem|pcie|other]_[ce|ue] sysfs to report
overflow status of each type of HW errors [Quan]
+ Update wording inKconfigfor smpro-errmon and smpro-misc [Quan]
+ Masks reserved bit when read 10-bit power value [Quan]
+ Add some minor refactor [Quan]v7:
+ Add docs toDocumentation/ABI/testing[Greg]
+ Re-order patches to avoid compile dependency [Lee Jones]
+ Remove regmap_acquire/release_lock() [Quan]
+ Install regmap bus->read/write() to handle multiple types of bus
access [Quan]
+ Replace i2c block read byregmap_noinc_read()[Quan]
+ Fix wrong return type of *show/store() [kernel test robot]
+ Update GPL version [Quan]
+ Add some others minor code refactor [Quan]v6:
+ Introduced smpro-errmon, smpro-misc as smpro-mfd sub-device [Quan]v5:
+ Introduced the smpro-mfd driver and drop the use of simple-mfd-i2c driver to avoid DT node with no resource in child device DT nodes [Rob]
+ Removed the use of reg DT property in child driver [Quan]
+ Validated ManufactureID when probing smpro-mfd drivers [Quan]
+ As child devices are instantiated by SMPro MFD driver, drop the ManufacturerID checking in child driver, ie: smpro-hwmon [Quan]
+ Revised commit messages [Quan]v4:
+ Revised commit message [Quan]
+ Fixed build issue found by kernel test robot [Guenter]
+ Returnedregmap_read()error code [Guenter]v3:
+ Supported list of compatible string [Rob]
+ Introduced reg property in DT to specify reg offset [Rob]
+ Updated description and other minor changes in yaml file [Rob]
+ Handled negative temperature value [Guenter]
+ Returned-ENODEVif Manufacturer ID is wrong [Guenter]
+ Refactoredsmpro_read_string()andsmpro_temp_read()[Guenter]
+ Removedsmpro_write()function [Guenter]
+ Added minor refactor changes [Quan]v2:
+ Used 'struct of_device_id's .data attribute [Lee Jones]
+ Removed "virtual" sensors [Guenter]
+ Fixed typo "mili" to "milli", "nanoWatt" to "microWatt" [Guenter]
+ ReportedSOC_TDPas "Socket TDP" using max attributes [Guenter]
+ Clarified "highest" meaning in documentation [Guenter]
+ Corrected return error code when host is turn off [Guenter]
+ Reported MEM HOT Threshold for all DIMMs as temp*_crit [Guenter]
+ Removed license info as SPDX-License-Identifier existed [Guenter]
+ Addedis_visible()support [Guenter]
+ UsedHWMON_CHANNEL_INFO()macro and LABEL attributes [Guenter]
+ Madeis_valid_id()return boolean [Guenter]
+ Returned -EPROBE_DEFER when smpro reg inaccessible [Guenter]
+ Removed unnecessary error message when dev register fail [Guenter]
+ Removed Socket TDP sensor [Quan]
+ Changed "ampere,ac01-smpro" to "ampere,smpro" [Quan]
+ Included sensor type and channel in labels [Quan]
+ Refactorized code to fix checkpatch.pl --strict complaint [Quan]Quan Nguyen (3):
dt-bindings: mfd: Add bindings for Ampere Altra SMPro MFD driver
misc: smpro-errmon: Add Ampere's SMpro error monitor driver
misc: smpro-misc: Add Ampere's Altra SMpro misc driver.../sysfs-bus-platform-devices-ampere-smpro | 312 +++++++++++ .../devicetree/bindings/mfd/ampere,smpro.yaml | 42 ++ drivers/misc/Kconfig | 22 + drivers/misc/Makefile | 2 + drivers/misc/smpro-errmon.c | 529 ++++++++++++++++++ drivers/misc/smpro-misc.c | 145 +++++ 6 files changed, 1052 insertions(+)create mode 100644
Documentation/ABI/testing/sysfs-bus-platform-devices-ampere-smprocreate mode 100644Documentation/devicetree/bindings/mfd/ampere,smpro.yamlcreate mode 100644drivers/misc/smpro-errmon.c
create mode 100644drivers/misc/smpro-misc.c