Skip to contentSkip to conversation

swiotlb: Half the size if allocation failed

PATCH In review Alexey Kardashevskiy 3 participants 3 messages Oct 31, 2022 – Nov 1, 2022

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 swiotlb: Half the size if allocation failed

At the moment the AMD encrypted platform reserves 6% of RAM for SWIOTLB or 1GB, whichever is less. However it is possible that there is no block big enough in the low memory which make SWIOTLB allocation fail and the kernel continues without DMA. In such case a VM hangs on DMA.

This moves alloc+remap to a helper and calls it from a loop where the size is halved on each iteration.

This updates default_nslabs on successful allocation which looks like an oversight as not doing so should have broken callers of swiotlb_size_or_default().

--
Changes:
v2:
* moved alloc+remap to a helper as suggested
* removed "x86" and "amd" from subj

--
I hit the problem with
QEMU's "-m 16819M" where SWIOTLB was adjusted to 0x7e200 == 1,058,013,184 (slightly less than 1GB) while 0x7e180 still worked.

With guest errors enabled, there are many unassigned accesses from virtio.

---
 kernel/dma/swiotlb.c | 66 +++++++++++++++++++++++++++-----------------
 1 file changed, 41 insertions(+), 25 deletions(-)
kernel/dma/swiotlb.c +41 -25
index 339a990554e7..53fc6e7d3aa5 100644
@@ -300,6 +300,36 @@ static void swiotlb_init_io_tlb_mem(struct io_tlb_mem *mem, phys_addr_t start,
 	return;
 }
 
+static void *swiotlb_memblock_alloc(unsigned long nslabs, unsigned int flags,
+				    int (*remap)(void *tlb, unsigned long nslabs))
+{
+	size_t bytes = PAGE_ALIGN(nslabs << IO_TLB_SHIFT);
+	void *tlb;
+
+	/*
+	 * By default allocate the bounce buffer memory from low memory, but
+	 * allow to pick a location everywhere for hypervisors with guest
+	 * memory encryption.
+	 */
+	if (flags & SWIOTLB_ANY)
+		tlb = memblock_alloc(bytes, PAGE_SIZE);
+	else
+		tlb = memblock_alloc_low(bytes, PAGE_SIZE);
+
+	if (!tlb) {
+		pr_warn("%s: Failed to allocate %zu bytes tlb structure\n", __func__, bytes);
+		return NULL;
+	}
+
+	if (remap && remap(tlb, nslabs) < 0) {
+		memblock_free(tlb, PAGE_ALIGN(bytes));
+		pr_warn("%s: Failed to remap %zu bytes\n", __func__, bytes);
+		return NULL;
+	}
+
+	return tlb;
+}
+
 /*
  * Statically reserve bounce buffer space and initialize bounce buffer data
  * structures for the software IO TLB used to implement the DMA API.
@@ -310,7 +340,6 @@ void __init swiotlb_init_remap(bool addressing_limit, unsigned int flags,
 	struct io_tlb_mem *mem = &io_tlb_default_mem;
 	unsigned long nslabs;
 	size_t alloc_size;
-	size_t bytes;
 	void *tlb;
 
 	if (!addressing_limit && !swiotlb_force_bounce)
@@ -325,32 +354,19 @@ void __init swiotlb_init_remap(bool addressing_limit, unsigned int flags,
 	if (!default_nareas)
 		swiotlb_adjust_nareas(num_possible_cpus());
 
-	nslabs = default_nslabs;
-	/*
-	 * By default allocate the bounce buffer memory from low memory, but
-	 * allow to pick a location everywhere for hypervisors with guest
-	 * memory encryption.
-	 */
-retry:
-	bytes = PAGE_ALIGN(nslabs << IO_TLB_SHIFT);
-	if (flags & SWIOTLB_ANY)
-		tlb = memblock_alloc(bytes, PAGE_SIZE);
-	else
-		tlb = memblock_alloc_low(bytes, PAGE_SIZE);
-	if (!tlb) {
-		pr_warn("%s: failed to allocate tlb structure\n", __func__);
-		return;
-	}
-
-	if (remap && remap(tlb, nslabs) < 0) {
-		memblock_free(tlb, PAGE_ALIGN(bytes));
-
+	for (nslabs = default_nslabs;; ) {
+		tlb = swiotlb_memblock_alloc(nslabs, flags, remap);
+		if (tlb)
+			break;
+		if (nslabs <= IO_TLB_MIN_SLABS)
+			return;
 		nslabs = ALIGN(nslabs >> 1, IO_TLB_SEGSIZE);
-		if (nslabs >= IO_TLB_MIN_SLABS)
-			goto retry;
+	}
 
-		pr_warn("%s: Failed to remap %zu bytes\n", __func__, bytes);
-		return;
+	if (default_nslabs != nslabs) {
+		pr_info("SWIOTLB bounce buffer size adjusted %lu -> %lu slabs",
+			default_nslabs, nslabs);
+		default_nslabs = nslabs;
 	}
 
 	alloc_size = PAGE_ALIGN(array_size(sizeof(*mem->slots), nslabs));
Signature · 1 line
2.38.1
Reviewed-by on v2 1/1
#1 lore raw
Quoted 114 lines · Alexey Kardashevskiy

At the moment the AMD encrypted platform reserves 6% of RAM for SWIOTLB or 1GB, whichever is less. However it is possible that there is no block big enough in the low memory which make SWIOTLB allocation fail and the kernel continues without DMA. In such case a VM hangs on DMA.

This moves alloc+remap to a helper and calls it from a loop where the size is halved on each iteration.

This updates default_nslabs on successful allocation which looks like an oversight as not doing so should have broken callers of swiotlb_size_or_default().

--
Changes:
v2:
* moved alloc+remap to a helper as suggested
* removed "x86" and "amd" from subj

--
I hit the problem with
QEMU's "-m 16819M" where SWIOTLB was adjusted to 0x7e200 == 1,058,013,184 (slightly less than 1GB) while 0x7e180 still worked.

With guest errors enabled, there are many unassigned accesses from virtio.

---
  kernel/dma/swiotlb.c | 66 +++++++++++++++++++++++++++-----------------
  1 file changed, 41 insertions(+), 25 deletions(-)
kernel/dma/swiotlb.c +37 -23
index 339a990554e7..53fc6e7d3aa5 100644
@@ -300,6 +300,36 @@ static void swiotlb_init_io_tlb_mem(struct io_tlb_mem *mem, phys_addr_t start,
  	return;
  }
 
+static void *swiotlb_memblock_alloc(unsigned long nslabs, unsigned int flags,
+				    int (*remap)(void *tlb, unsigned long nslabs))
+{
+	size_t bytes = PAGE_ALIGN(nslabs << IO_TLB_SHIFT);
+	void *tlb;
+
+	/*
+	 * By default allocate the bounce buffer memory from low memory, but
+	 * allow to pick a location everywhere for hypervisors with guest
+	 * memory encryption.
+	 */
+	if (flags & SWIOTLB_ANY)
+		tlb = memblock_alloc(bytes, PAGE_SIZE);
+	else
+		tlb = memblock_alloc_low(bytes, PAGE_SIZE);
+
+	if (!tlb) {
+		pr_warn("%s: Failed to allocate %zu bytes tlb structure\n", __func__, bytes);
+		return NULL;
+	}
+
+	if (remap && remap(tlb, nslabs) < 0) {
+		memblock_free(tlb, PAGE_ALIGN(bytes));
+		pr_warn("%s: Failed to remap %zu bytes\n", __func__, bytes);
+		return NULL;
+	}
+
+	return tlb;
+}
+
  /*
   * Statically reserve bounce buffer space and initialize bounce buffer data
   * structures for the software IO TLB used to implement the DMA API.
@@ -310,7 +340,6 @@ void __init swiotlb_init_remap(bool addressing_limit, unsigned int flags,
  	struct io_tlb_mem *mem = &io_tlb_default_mem;
  	unsigned long nslabs;
  	size_t alloc_size;
-	size_t bytes;
  	void *tlb;
 
  	if (!addressing_limit && !swiotlb_force_bounce)
@@ -325,32 +354,19 @@ void __init swiotlb_init_remap(bool addressing_limit, unsigned int flags,
  	if (!default_nareas)
  		swiotlb_adjust_nareas(num_possible_cpus());
 
-	nslabs = default_nslabs;
-	/*
-	 * By default allocate the bounce buffer memory from low memory, but
-	 * allow to pick a location everywhere for hypervisors with guest
-	 * memory encryption.
-	 */
-retry:
-	bytes = PAGE_ALIGN(nslabs << IO_TLB_SHIFT);
-	if (flags & SWIOTLB_ANY)
-		tlb = memblock_alloc(bytes, PAGE_SIZE);
-	else
-		tlb = memblock_alloc_low(bytes, PAGE_SIZE);
-	if (!tlb) {
-		pr_warn("%s: failed to allocate tlb structure\n", __func__);
-		return;
-	}
-
-	if (remap && remap(tlb, nslabs) < 0) {
-		memblock_free(tlb, PAGE_ALIGN(bytes));
-
+	for (nslabs = default_nslabs;; ) {
+		tlb = swiotlb_memblock_alloc(nslabs, flags, remap);
+		if (tlb)
+			break;
+		if (nslabs <= IO_TLB_MIN_SLABS)
+			return;
  		nslabs = ALIGN(nslabs >> 1, IO_TLB_SEGSIZE);
-		if (nslabs >= IO_TLB_MIN_SLABS)
-			goto retry;
+	}

kernel/dma/swiotlb.c void __init swiotlb_init_remap(bool addressing_limit, unsigned int flags, · line 372

Quoted 10 lines
kernel/dma/swiotlb.c +4 -2
 
-		pr_warn("%s: Failed to remap %zu bytes\n", __func__, bytes);
-		return;
+	if (default_nslabs != nslabs) {
+		pr_info("SWIOTLB bounce buffer size adjusted %lu -> %lu slabs",
+			default_nslabs, nslabs);
+		default_nslabs = nslabs;
  	}
 
  	alloc_size = PAGE_ALIGN(array_size(sizeof(*mem->slots), nslabs));

With memblock contiguous allocation under 4G memory fallback to lower order allocation, seems to fix the inconsistent state issue if the buffer is not at all allocated.

Feel free to add:

Reviewed-by Pankaj Gupta on v2 1/1
#2 lore raw
In reply to Alexey Kardashevskiy

Thanks. I've applied this with minor edits (see below).

---
From 8d58aa484920c4f9be4834a7aeb446cdced21a37 Mon Sep 17 00:00:00 2001
From: Alexey Kardashevskiy <[email protected]>
Date: Mon, 31 Oct 2022 19:13:27 +1100
Subject: swiotlb: reduce the swiotlb buffer size on allocation failure

At the moment the AMD encrypted platform reserves 6% of RAM for SWIOTLB or 1GB, whichever is less. However it is possible that there is no block big enough in the low memory which make SWIOTLB allocation fail and the kernel continues without DMA. In such case a VM hangs on DMA.

This moves alloc+remap to a helper and calls it from a loop where the size is halved on each iteration.

This updates default_nslabs on successful allocation which looks like an oversight as not doing so should have broken callers of swiotlb_size_or_default().

---
 kernel/dma/swiotlb.c | 63 +++++++++++++++++++++++++++-----------------
 1 file changed, 39 insertions(+), 24 deletions(-)
kernel/dma/swiotlb.c +39 -24
index 339a990554e7f..a34c38bbe28f1 100644
@@ -300,6 +300,37 @@ static void swiotlb_init_io_tlb_mem(struct io_tlb_mem *mem, phys_addr_t start,
 	return;
 }
 
+static void *swiotlb_memblock_alloc(unsigned long nslabs, unsigned int flags,
+		int (*remap)(void *tlb, unsigned long nslabs))
+{
+	size_t bytes = PAGE_ALIGN(nslabs << IO_TLB_SHIFT);
+	void *tlb;
+
+	/*
+	 * By default allocate the bounce buffer memory from low memory, but
+	 * allow to pick a location everywhere for hypervisors with guest
+	 * memory encryption.
+	 */
+	if (flags & SWIOTLB_ANY)
+		tlb = memblock_alloc(bytes, PAGE_SIZE);
+	else
+		tlb = memblock_alloc_low(bytes, PAGE_SIZE);
+
+	if (!tlb) {
+		pr_warn("%s: Failed to allocate %zu bytes tlb structure\n",
+			__func__, bytes);
+		return NULL;
+	}
+
+	if (remap && remap(tlb, nslabs) < 0) {
+		memblock_free(tlb, PAGE_ALIGN(bytes));
+		pr_warn("%s: Failed to remap %zu bytes\n", __func__, bytes);
+		return NULL;
+	}
+
+	return tlb;
+}
+
 /*
  * Statically reserve bounce buffer space and initialize bounce buffer data
  * structures for the software IO TLB used to implement the DMA API.
@@ -310,7 +341,6 @@ void __init swiotlb_init_remap(bool addressing_limit, unsigned int flags,
 	struct io_tlb_mem *mem = &io_tlb_default_mem;
 	unsigned long nslabs;
 	size_t alloc_size;
-	size_t bytes;
 	void *tlb;
 
 	if (!addressing_limit && !swiotlb_force_bounce)
@@ -326,31 +356,16 @@ void __init swiotlb_init_remap(bool addressing_limit, unsigned int flags,
 		swiotlb_adjust_nareas(num_possible_cpus());
 
 	nslabs = default_nslabs;
-	/*
-	 * By default allocate the bounce buffer memory from low memory, but
-	 * allow to pick a location everywhere for hypervisors with guest
-	 * memory encryption.
-	 */
-retry:
-	bytes = PAGE_ALIGN(nslabs << IO_TLB_SHIFT);
-	if (flags & SWIOTLB_ANY)
-		tlb = memblock_alloc(bytes, PAGE_SIZE);
-	else
-		tlb = memblock_alloc_low(bytes, PAGE_SIZE);
-	if (!tlb) {
-		pr_warn("%s: failed to allocate tlb structure\n", __func__);
-		return;
-	}
-
-	if (remap && remap(tlb, nslabs) < 0) {
-		memblock_free(tlb, PAGE_ALIGN(bytes));
-
+	while ((tlb = swiotlb_memblock_alloc(nslabs, flags, remap)) == NULL) {
+		if (nslabs <= IO_TLB_MIN_SLABS)
+			return;
 		nslabs = ALIGN(nslabs >> 1, IO_TLB_SEGSIZE);
-		if (nslabs >= IO_TLB_MIN_SLABS)
-			goto retry;
+	}
 
-		pr_warn("%s: Failed to remap %zu bytes\n", __func__, bytes);
-		return;
+	if (default_nslabs != nslabs) {
+		pr_info("SWIOTLB bounce buffer size adjusted %lu -> %lu slabs",
+			default_nslabs, nslabs);
+		default_nslabs = nslabs;
 	}
 
 	alloc_size = PAGE_ALIGN(array_size(sizeof(*mem->slots), nslabs));
Signature · 1 line
2.30.2