octeontx2-af: Allow mkex profile without DMAC and add L2M/L2B header extraction support
PATCH 1/1 octeontx2-af: Allow mkex profile without DMAC and add L2M/L2B header extraction support
1. It is possible to have custom mkex profiles which do not extract DMAC at all into the key. Hence allow mkex profiles which do not have DMAC to be loaded into MCAM hardware. This patch also adds debugging prints needed to identify profiles with wrong configuration.
2. If a mkex profile set "l2l3mb" field for Rx interface, then Rx multicast and broadcast entry should be configured.
--- .../net/ethernet/marvell/octeontx2/af/npc.h | 1 + .../marvell/octeontx2/af/rvu_debugfs.c | 6 ++ .../marvell/octeontx2/af/rvu_npc_fs.c | 81 ++++++++++++++----- 3 files changed, 70 insertions(+), 18 deletions(-)
drivers/net/ethernet/marvell/octeontx2/af/npc.h +1 -0
@@ -620,6 +620,7 @@ struct rvu_npc_mcam_rule {bool vfvlan_cfg;u16 chan;u16 chan_mask; + u8 lxmb; };#endif /* NPC_H */
drivers/net/ethernet/marvell/octeontx2/af/rvu_debugfs.c +6 -0
@@ -2756,6 +2756,12 @@ static void rvu_dbg_npc_mcam_show_flows(struct seq_file *s,for_each_set_bit (bit, (unsigned long *)&rule->features,64 ) {seq_printf (s,"\t%s " ,npc_get_field_name (bit));switch (bit) { +case NPC_LXMB : +if (rule->lxmb ==1 ) +seq_puts (s,"\tL2M nibble is set\n" ); +else +seq_puts (s,"\tL2B nibble is set\n" ); +break ;case NPC_DMAC :seq_printf (s,"%pM " , rule->packet.dmac);seq_printf (s,"mask %pM\n" , rule->mask.dmac);
drivers/net/ethernet/marvell/octeontx2/af/rvu_npc_fs.c +63 -18
167 lines not on this page · raw message
Signature · 1 line
2.25.1
This patch was applied to netdev/net-next.git (master) by Jakub Kicinski <[email protected]>:
Hello:
This patch was applied to netdev/net-next.git (master) by Jakub Kicinski <[email protected]>:
Quoted 10 lines · On Mon, 31 Oct 2022 14:38:56 +0530 you wrote:
1. It is possible to have custom mkex profiles which do not extract DMAC at all into the key. Hence allow mkex profiles which do not have DMAC to be loaded into MCAM hardware. This patch also adds debugging prints needed to identify profiles with wrong configuration.
2. If a mkex profile set "l2l3mb" field for Rx interface, then Rx multicast and broadcast entry should be configured.
[...]
Here is the summary with links:
- [net-next] octeontx2-af: Allow mkex profile without DMAC and add L2M/L2B header extraction support
https://git.kernel.org/netdev/net-next/c/2cee6401c4ea
You are awesome, thank you!
Signature · 2 lines
Deet-doot-dot, I am a bot. https://korg.docs.kernel.org/patchwork/pwbot.html