arm: bcmbca: move bcm6858 support under CONFIG_ARCH_BCMBCA
Subsystems (8)
William Zhang
maintainerv2 cover arm: bcmbca: move bcm6858 support under CONFIG_ARCH_BCMBCA
Sorry for another version of patch series with some minor updates. Please see the change log and specific patch for details.
BCM6858 is part of the Broadcom BCA (Broadband Carrier Access origin) chipset family. BCM6858 was originally added by Philippe before Broadcom started to upstream the support for BCMBCA SoCs. The ARM based Broadband SoC family is now supported under the unified ARCH_BCMBCA config. This patch series migrate the BCM6858 support under the config of ARCH_BCMBCA and BCM6858.
This patch series need to apply on top of my previous patch series [1].
[1]: https://lists.denx.de/pipermail/u-boot/2022-August/492470.html
Changes in v2:
-Add help in BCM6858 Kconfig option to include the list of the supported chips.
-Update subject line to be more clear for patch 3
William Zhang (3):
arm: bcmbca: add bcm6858 SoC support under CONFIG_ARCH_BCMBCA
arm: bcmbca: remove bcm6858 support under CONFIG_ARCH_BCM6858
arm: bcmbca: replace ARCH_BCM6858 symbols in Kconfig with BCM6858
MAINTAINERS | 1 + arch/arm/Kconfig | 7 - arch/arm/dts/Makefile | 6 +- arch/arm/dts/bcm6858.dtsi | 197 +++++++++++-------- arch/arm/dts/bcm96858.dts | 30 +++ arch/arm/dts/bcm968580xref.dts | 4 +- arch/arm/mach-bcmbca/Kconfig | 11 ++ arch/arm/mach-bcmbca/Makefile | 1 + arch/arm/mach-bcmbca/bcm6858/Kconfig | 17 ++ arch/arm/mach-bcmbca/bcm6858/Makefile | 5 + arch/arm/mach-bcmbca/bcm6858/mmu_table.c | 32 +++ board/broadcom/bcm968580xref/Kconfig | 17 -- board/broadcom/bcm968580xref/MAINTAINERS | 6 - board/broadcom/bcm968580xref/Makefile | 3 - board/broadcom/bcm968580xref/bcm968580xref.c | 62 ------ board/broadcom/bcmbca/Kconfig | 7 + configs/bcm968580xref_ram_defconfig | 64 ------ configs/bcm96858_defconfig | 23 +++ drivers/gpio/Kconfig | 3 +- drivers/led/Kconfig | 2 +- drivers/mtd/nand/raw/Kconfig | 2 +- drivers/spi/Kconfig | 3 +- drivers/watchdog/Kconfig | 3 +- include/configs/bcm96858.h | 15 ++ include/configs/broadcom_bcm968580xref.h | 32 --- 25 files changed, 270 insertions(+), 283 deletions(-) create mode 100644 arch/arm/dts/bcm96858.dts create mode 100644 arch/arm/mach-bcmbca/bcm6858/Kconfig create mode 100644 arch/arm/mach-bcmbca/bcm6858/Makefile create mode 100644 arch/arm/mach-bcmbca/bcm6858/mmu_table.c delete mode 100644 board/broadcom/bcm968580xref/Kconfig delete mode 100644 board/broadcom/bcm968580xref/MAINTAINERS delete mode 100644 board/broadcom/bcm968580xref/Makefile delete mode 100644 board/broadcom/bcm968580xref/bcm968580xref.c delete mode 100644 configs/bcm968580xref_ram_defconfig create mode 100644 configs/bcm96858_defconfig create mode 100644 include/configs/bcm96858.h delete mode 100644 include/configs/broadcom_bcm968580xref.h
Signature · 1 line
2.37.1
William Zhang
maintainerPATCH v2 1/3 arm: bcmbca: add bcm6858 SoC support under CONFIG_ARCH_BCMBCA
BCM6858 is a Broadcom B53 based PON Gateway SoC. It is part of the BCA (Broadband Carrier Access origin) chipset family. Like other broadband SoC, this patch adds it under CONFIG_BCM6858 chip config and CONFIG_ARCH_BCMBCA platform config.
This initial support includes a bare-bone implementation and the original dts is updated with the one from linux next git repository.
The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there to the console.
---
Changes in v2:
-Add help in BCM6858 Kconfig option to include the list of the supported chips.
MAINTAINERS | 1 + arch/arm/dts/Makefile | 2 + arch/arm/dts/bcm6858.dtsi | 197 ++++++++++++++--------- arch/arm/dts/bcm96858.dts | 30 ++++ arch/arm/mach-bcmbca/Kconfig | 11 ++ arch/arm/mach-bcmbca/Makefile | 1 + arch/arm/mach-bcmbca/bcm6858/Kconfig | 17 ++ arch/arm/mach-bcmbca/bcm6858/Makefile | 5 + arch/arm/mach-bcmbca/bcm6858/mmu_table.c | 32 ++++ board/broadcom/bcmbca/Kconfig | 7 + configs/bcm96858_defconfig | 23 +++ include/configs/bcm96858.h | 11 ++ 12 files changed, 258 insertions(+), 79 deletions(-) create mode 100644 arch/arm/dts/bcm96858.dts create mode 100644 arch/arm/mach-bcmbca/bcm6858/Kconfig create mode 100644 arch/arm/mach-bcmbca/bcm6858/Makefile create mode 100644 arch/arm/mach-bcmbca/bcm6858/mmu_table.c create mode 100644 configs/bcm96858_defconfig create mode 100644 include/configs/bcm96858.h
MAINTAINERS +1 -0
@@ -231,6 +231,7 @@ N: bcm[9]?6756 N: bcm[9]?6813 N: bcm[9]?6846 N: bcm[9]?6856 +N: bcm[9]?6858 N: bcm[9]?6878 ARM BROADCOM BCMSTB
arch/arm/dts/Makefile +2 -0
@@ -1182,6 +1182,8 @@ dtb-$(CONFIG_BCM6846) += \ dtb-$(CONFIG_BCM6856) += \ bcm96856.dtb \ bcm968360bg.dtb +dtb-$(CONFIG_BCM6858) += \ + bcm96858.dtb dtb-$(CONFIG_BCM6878) += \ bcm96878.dtb
arch/arm/dts/bcm6858.dtsi +118 -79
345 lines not on this page · raw message
arch/arm/dts/bcm96858.dts new file +30 -0
@@ -0,0 +1,30 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Broadcom Ltd. + */ + +/dts-v1/; + +#include "bcm6858.dtsi" + +/ { + model = "Broadcom BCM96858 Reference Board"; + compatible = "brcm,bcm96858", "brcm,bcm6858", "brcm,bcmbca"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x08000000>; + }; +}; + +&uart0 { + status = "okay"; +};
arch/arm/mach-bcmbca/Kconfig +11 -0
@@ -93,6 +93,16 @@ config BCM6856 Broadcom BCM6856 is a dual core Brahma-B53 ARMv8 based xPON Gateway SoC. This SoC family includes BCM6856, BCM6836 and BCM4910. +config BCM6858 + bool "Support for Broadcom 6858 Family" + select ARM64 + select SYS_ARCH_TIMER + select DM_SERIAL + select BCM6345_SERIAL + help + Broadcom BCM6858 is a quad core Brahma-B53 ARMv8 based xPON Gateway + SoC. This SoC family includes BCM6858, BCM49508, BCM5504X and BCM6545. + config BCM6878 bool "Support for Broadcom 6878 Family" select SYS_ARCH_TIMER
@@ -112,6 +122,7 @@ source "arch/arm/mach-bcmbca/bcm6756/Kconfig" source "arch/arm/mach-bcmbca/bcm6813/Kconfig" source "arch/arm/mach-bcmbca/bcm6846/Kconfig" source "arch/arm/mach-bcmbca/bcm6856/Kconfig" +source "arch/arm/mach-bcmbca/bcm6858/Kconfig" source "arch/arm/mach-bcmbca/bcm6878/Kconfig" endif
arch/arm/mach-bcmbca/Makefile +1 -0
@@ -15,4 +15,5 @@ obj-$(CONFIG_BCM6756) += bcm6756/ obj-$(CONFIG_BCM6813) += bcm6813/ obj-$(CONFIG_BCM6846) += bcm6846/ obj-$(CONFIG_BCM6856) += bcm6856/ +obj-$(CONFIG_BCM6858) += bcm6858/ obj-$(CONFIG_BCM6878) += bcm6878/
arch/arm/mach-bcmbca/bcm6858/Kconfig new file +17 -0
@@ -0,0 +1,17 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# (C) Copyright 2022 Broadcom Ltd +# + +if BCM6858 + +config TARGET_BCM96858 + bool "Broadcom 6858 Reference Board" + depends on ARCH_BCMBCA + +config SYS_SOC + default "bcm6858" + +source "board/broadcom/bcmbca/Kconfig" + +endif
arch/arm/mach-bcmbca/bcm6858/Makefile new file +5 -0
@@ -0,0 +1,5 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# (C) Copyright 2022 Broadcom Ltd +# +obj-y += mmu_table.o
arch/arm/mach-bcmbca/bcm6858/mmu_table.c new file +32 -0
@@ -0,0 +1,32 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* +* Copyright 2022 Broadcom Ltd. +*/ +#include <common.h> +#include <asm/armv8/mmu.h> +#include <linux/sizes.h> + +static struct mm_region bcm96858_mem_map[] = { + { + .virt =0x00000000UL , + .phys =0x00000000UL , + .size =1UL *SZ_1G , + .attrs =PTE_BLOCK_MEMTYPE (MT_NORMAL ) | +PTE_BLOCK_INNER_SHARE + }, + { +/* SoC peripheral */ + .virt =0xff800000UL , + .phys =0xff800000UL , + .size =0x100000 , + .attrs =PTE_BLOCK_MEMTYPE (MT_DEVICE_NGNRNE ) | +PTE_BLOCK_NON_SHARE | +PTE_BLOCK_PXN |PTE_BLOCK_UXN + }, + { +/* List terminator */ +0 , + } +}; + +struct mm_region *mem_map = bcm96858_mem_map;
board/broadcom/bcmbca/Kconfig +7 -0
@@ -93,6 +93,13 @@ config SYS_CONFIG_NAME endif +if TARGET_BCM96858 + +config SYS_CONFIG_NAME + default "bcm96858" + +endif + if TARGET_BCM96878 config SYS_CONFIG_NAME
configs/bcm96858_defconfig new file +23 -0
@@ -0,0 +1,23 @@ +CONFIG_ARM=y +CONFIG_COUNTER_FREQUENCY=50000000 +CONFIG_ARCH_BCMBCA=y +CONFIG_SYS_TEXT_BASE=0x01000000 +CONFIG_SYS_MALLOC_LEN=0x2000000 +CONFIG_SYS_MALLOC_F_LEN=0x8000 +CONFIG_BCM6858=y +CONFIG_TARGET_BCM96858=y +CONFIG_NR_DRAM_BANKS=2 +CONFIG_DEFAULT_DEVICE_TREE="bcm96858" +CONFIG_IDENT_STRING=" Broadcom BCM6858" +CONFIG_SYS_LOAD_ADDR=0x01000000 +CONFIG_ENV_VARS_UBOOT_CONFIG=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x2000000 +CONFIG_OF_STDOUT_VIA_ALIAS=y +CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_BOOTM_LEN=0x4000000 +CONFIG_CMD_CACHE=y +CONFIG_OF_EMBED=y +CONFIG_CLK=y
include/configs/bcm96858.h new file +11 -0
@@ -0,0 +1,11 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* +* (C) Copyright 2022 Broadcom Ltd. +*/ + +#ifndef __BCM96858_H +#define __BCM96858_H + +#define CONFIG_SYS_SDRAM_BASE 0x00000000 + +#endif
Signature · 1 line
2.37.1
Re: [PATCH v2 1/3] arm: bcmbca: add bcm6858 SoC support under CONFIG_ARCH_BCMBCA
Hi William,
Le 22/08/2022 à 20:39, William Zhang a écrit :
Quoted 5 lines
BCM6858 is a Broadcom B53 based PON Gateway SoC. It is part of the BCA (Broadband Carrier Access origin) chipset family. Like other broadband SoC, this patch adds it under
CONFIG_BCM6858chip config andCONFIG_ARCH_BCMBCAplatform config.
Quoted 7 lines
This initial support includes a bare-bone implementation and the original dts is updated with the one from linux next git repository.
The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there to the console.
Signed-off-by William Zhang <[email protected]>
Quoted 615 lines
---
Changes in v2:
-Add help in BCM6858Kconfigoption to include the list of the supported chips.MAINTAINERS | 1 + arch/arm/dts/Makefile | 2 + arch/arm/dts/bcm6858.dtsi | 197 ++++++++++++++--------- arch/arm/dts/bcm96858.dts | 30 ++++ arch/arm/mach-bcmbca/Kconfig | 11 ++ arch/arm/mach-bcmbca/Makefile | 1 + arch/arm/mach-bcmbca/bcm6858/Kconfig | 17 ++ arch/arm/mach-bcmbca/bcm6858/Makefile | 5 + arch/arm/mach-bcmbca/bcm6858/mmu_table.c | 32 ++++ board/broadcom/bcmbca/Kconfig | 7 + configs/bcm96858_defconfig | 23 +++ include/configs/bcm96858.h | 11 ++ 12 files changed, 258 insertions(+), 79 deletions(-)create mode 100644
arch/arm/dts/bcm96858.dtscreate mode 100644arch/arm/mach-bcmbca/bcm6858/Kconfigcreate mode 100644arch/arm/mach-bcmbca/bcm6858/Makefilecreate mode 100644arch/arm/mach-bcmbca/bcm6858/mmu_table.ccreate mode 100644 configs/bcm96858_defconfig create mode 100644include/configs/bcm96858.hMAINTAINERS +1
-0@@ -231,6 +231,7 @@ N: bcm[9]?6756 N: bcm[9]?6813 N: bcm[9]?6846 N: bcm[9]?6856 +N: bcm[9]?6858 N: bcm[9]?6878 ARM BROADCOM BCMSTBarch/arm/dts/Makefile +2
-0@@ -1182,6 +1182,8 @@ dtb-$(CONFIG_BCM6846) += \ dtb-$(CONFIG_BCM6856) += \ bcm96856.dtb \ bcm968360bg.dtb +dtb-$(CONFIG_BCM6858) += \ + bcm96858.dtb dtb-$(CONFIG_BCM6878) += \ bcm96878.dtbarch/arm/dts/bcm6858.dtsi +118
-79@@ -1,122 +1,161 @@ // SPDX-License-Identifier: GPL-2.0+ /* * Copyright (C) 2018 Philippe Reynes <[email protected]> + * Copyright 2022 Broadcom Ltd. */ -#include "skeleton64.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> / { - compatible = "brcm,bcm6858"; + compatible = "brcm,bcm6858", "brcm,bcmbca"; #address-cells = <2>; #size-cells = <2>; - aliases { - spi0 = &hsspi; - }; + interrupt-parent = <&gic>; cpus { #address-cells = <2>; #size-cells = <0>; - u-boot,dm-pre-reloc; - cpu0: cpu@0 { - compatible = "arm,cortex-a53", "arm,armv8"; + B53_0: cpu@0 { + compatible = "brcm,brahma-b53"; device_type = "cpu"; reg = <0x0 0x0>; - next-level-cache = <&l2>; - u-boot,dm-pre-reloc; + next-level-cache = <&L2_0>; + enable-method = "psci"; }; - cpu1: cpu@1 { - compatible = "arm,cortex-a53", "arm,armv8"; + B53_1: cpu@1 { + compatible = "brcm,brahma-b53"; device_type = "cpu"; reg = <0x0 0x1>; - next-level-cache = <&l2>; - u-boot,dm-pre-reloc; + next-level-cache = <&L2_0>; + enable-method = "psci"; }; - cpu2: cpu@2 { - compatible = "arm,cortex-a53", "arm,armv8"; + B53_2: cpu@2 { + compatible = "brcm,brahma-b53"; device_type = "cpu"; reg = <0x0 0x2>; - next-level-cache = <&l2>; - u-boot,dm-pre-reloc; + next-level-cache = <&L2_0>; + enable-method = "psci"; }; - cpu3: cpu@3 { - compatible = "arm,cortex-a53", "arm,armv8"; + B53_3: cpu@3 { + compatible = "brcm,brahma-b53"; device_type = "cpu"; reg = <0x0 0x3>; - next-level-cache = <&l2>; - u-boot,dm-pre-reloc; + next-level-cache = <&L2_0>; + enable-method = "psci"; }; - l2: l2-cache0 { + L2_0: l2-cache0 { compatible = "cache"; - u-boot,dm-pre-reloc; }; }; + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; + + pmu: pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&B53_0>, <&B53_1>, + <&B53_2>, <&B53_3>; + }; + clocks { - compatible = "simple-bus"; - #address-cells = <2>; - #size-cells = <2>; - ranges; u-boot,dm-pre-reloc; - periph_osc: periph-osc { + periph_clk: periph_clk { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <200000000>; - u-boot,dm-pre-reloc; }; hsspi_pll: hsspi-pll { compatible = "fixed-factor-clock"; #clock-cells = <0>; - clocks = <&periph_osc>; + clocks = <&periph_clk>; clock-mult = <2>; clock-div = <1>; }; - refclk50mhz: refclk50mhz { - compatible = "fixed-clock"; + wdt_clk: wdt-clk { + compatible = "fixed-factor-clock"; #clock-cells = <0>; - clock-frequency = <50000000>; + clocks = <&periph_clk>; + clock-div = <4>; + clock-mult = <1>; }; }; - ubus { + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + axi@81000000 { compatible = "simple-bus"; - #address-cells = <2>; - #size-cells = <2>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x81000000 0x8000>; + + gic: interrupt-controller@1000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x1000 0x1000>, /* GICD */ + <0x2000 0x2000>, /* GICC */ + <0x4000 0x2000>, /* GICH */ + <0x6000 0x2000>; /* GICV */ + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | + IRQ_TYPE_LEVEL_HIGH)>; + }; + }; + + bus@ff800000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0xff800000 0x800000>; u-boot,dm-pre-reloc; - uart0: serial@ff800640 { + uart0: serial@640 { compatible = "brcm,bcm6345-uart"; - reg = <0x0 0xff800640 0x0 0x18>; - clocks = <&periph_osc>; - + reg = <0x640 0x18>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&periph_clk>; + clock-names = "refclk"; status = "disabled"; }; - leds: led-controller@ff800800 { + leds: led-controller@800 { compatible = "brcm,bcm6858-leds"; - reg = <0x0 0xff800800 0x0 0xe4>; + reg = <0x800 0xe4>; status = "disabled"; }; - wdt1: watchdog@ff802780 { + wdt1: watchdog@2780 { compatible = "brcm,bcm6345-wdt"; - reg = <0x0 0xff802780 0x0 0x14>; - clocks = <&refclk50mhz>; + reg = <0x2780 0x14>; + clocks = <&wdt_clk>; }; - wdt2: watchdog@ff8027c0 { + wdt2: watchdog@27c0 { compatible = "brcm,bcm6345-wdt"; - reg = <0x0 0xff8027c0 0x0 0x14>; - clocks = <&refclk50mhz>; + reg = <0x27c0 0x14>; + clocks = <&wdt_clk>; }; wdt-reboot {@@ -124,91 +163,91 @@ wdt = <&wdt1>; }; - gpio0: gpio-controller@0xff800500 { + gpio0: gpio-controller@500 { compatible = "brcm,bcm6345-gpio"; - reg = <0x0 0xff800500 0x0 0x4>, - <0x0 0xff800520 0x0 0x4>; + reg = <0x500 0x4>, + <0x520 0x4>; gpio-controller; #gpio-cells = <2>; status = "disabled"; }; - gpio1: gpio-controller@0xff800504 { + gpio1: gpio-controller@504 { compatible = "brcm,bcm6345-gpio"; - reg = <0x0 0xff800504 0x0 0x4>, - <0x0 0xff800524 0x0 0x4>; + reg = <0x504 0x4>, + <0x524 0x4>; gpio-controller; #gpio-cells = <2>; status = "disabled"; }; - gpio2: gpio-controller@0xff800508 { + gpio2: gpio-controller@508 { compatible = "brcm,bcm6345-gpio"; - reg = <0x0 0xff800508 0x0 0x4>, - <0x0 0xff800528 0x0 0x4>; + reg = <0x508 0x4>, + <0x528 0x4>; gpio-controller; #gpio-cells = <2>; status = "disabled"; }; - gpio3: gpio-controller@0xff80050c { + gpio3: gpio-controller@50c { compatible = "brcm,bcm6345-gpio"; - reg = <0x0 0xff80050c 0x0 0x4>, - <0x0 0xff80052c 0x0 0x4>; + reg = <0x50c 0x4>, + <0x52c 0x4>; gpio-controller; #gpio-cells = <2>; status = "disabled"; }; - gpio4: gpio-controller@0xff800510 { + gpio4: gpio-controller@510 { compatible = "brcm,bcm6345-gpio"; - reg = <0x0 0xff800510 0x0 0x4>, - <0x0 0xff800530 0x0 0x4>; + reg = <0x510 0x4>, + <0x530 0x4>; gpio-controller; #gpio-cells = <2>; status = "disabled"; }; - gpio5: gpio-controller@0xff800514 { + gpio5: gpio-controller@514 { compatible = "brcm,bcm6345-gpio"; - reg = <0x0 0xff800514 0x0 0x4>, - <0x0 0xff800534 0x0 0x4>; + reg = <0x514 0x4>, + <0x534 0x4>; gpio-controller; #gpio-cells = <2>; status = "disabled"; }; - gpio6: gpio-controller@0xff800518 { + gpio6: gpio-controller@518 { compatible = "brcm,bcm6345-gpio"; - reg = <0x0 0xff800518 0x0 0x4>, - <0x0 0xff800538 0x0 0x4>; + reg = <0x518 0x4>, + <0x538 0x4>; gpio-controller; #gpio-cells = <2>; status = "disabled"; }; - gpio7: gpio-controller@0xff80051c { + gpio7: gpio-controller@51c { compatible = "brcm,bcm6345-gpio"; - reg = <0x0 0xff80051c 0x0 0x4>, - <0x0 0xff80053c 0x0 0x4>; + reg = <0x51c 0x4>, + <0x53c 0x4>; gpio-controller; #gpio-cells = <2>; status = "disabled"; }; - hsspi: spi-controller@ff801000 { + hsspi: spi-controller@1000 { compatible = "brcm,bcm6328-hsspi"; #address-cells = <1>; #size-cells = <0>; - reg = <0x0 0xff801000 0x0 0x600>; + reg = <0x1000 0x600>; clocks = <&hsspi_pll>, <&hsspi_pll>; clock-names = "hsspi", "pll"; spi-max-frequency = <100000000>;@@ -217,14 +256,14 @@ status = "disabled"; }; - nand: nand-controller@ff801800 { + nand: nand-controller@1800 { compatible = "brcm,nand-bcm6858", "brcm,brcmnand-v5.0", "brcm,brcmnand"; reg-names = "nand", "nand-int-base", "nand-cache"; - reg = <0x0 0xff801800 0x0 0x180>, - <0x0 0xff802000 0x0 0x10>, - <0x0 0xff801c00 0x0 0x200>; + reg = <0x1800 0x180>, + <0x2000 0x10>, + <0x1c00 0x200>; parameter-page-big-endian = <0>; status = "disabled";arch/arm/dts/bcm96858.dts new file +30
-0@@ -0,0 +1,30 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Broadcom Ltd. + */ + +/dts-v1/; + +#include "bcm6858.dtsi" + +/ { + model = "Broadcom BCM96858 Reference Board"; + compatible = "brcm,bcm96858", "brcm,bcm6858", "brcm,bcmbca"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x08000000>; + }; +}; + +&uart0 { + status = "okay"; +};arch/arm/mach-bcmbca/Kconfig +11
-0@@ -93,6 +93,16 @@ config BCM6856 Broadcom BCM6856 is a dual core Brahma-B53 ARMv8 based xPON Gateway SoC. This SoC family includes BCM6856, BCM6836 and BCM4910. +config BCM6858 + bool "Support for Broadcom 6858 Family" + select ARM64 + select SYS_ARCH_TIMER + select DM_SERIAL + select BCM6345_SERIAL + help + Broadcom BCM6858 is a quad core Brahma-B53 ARMv8 based xPON Gateway + SoC. This SoC family includes BCM6858, BCM49508, BCM5504X and BCM6545. + config BCM6878 bool "Support for Broadcom 6878 Family" select SYS_ARCH_TIMER@@ -112,6 +122,7 @@ source "arch/arm/mach-bcmbca/bcm6756/Kconfig" source "arch/arm/mach-bcmbca/bcm6813/Kconfig" source "arch/arm/mach-bcmbca/bcm6846/Kconfig" source "arch/arm/mach-bcmbca/bcm6856/Kconfig" +source "arch/arm/mach-bcmbca/bcm6858/Kconfig" source "arch/arm/mach-bcmbca/bcm6878/Kconfig" endifarch/arm/mach-bcmbca/Makefile +1
-0@@ -15,4 +15,5 @@ obj-$(CONFIG_BCM6756) += bcm6756/ obj-$(CONFIG_BCM6813) += bcm6813/ obj-$(CONFIG_BCM6846) += bcm6846/ obj-$(CONFIG_BCM6856) += bcm6856/ +obj-$(CONFIG_BCM6858) += bcm6858/ obj-$(CONFIG_BCM6878) += bcm6878/arch/arm/mach-bcmbca/bcm6858/Kconfig new file +17
-0@@ -0,0 +1,17 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# (C) Copyright 2022 Broadcom Ltd +# + +if BCM6858 + +config TARGET_BCM96858 + bool "Broadcom 6858 Reference Board" + depends on ARCH_BCMBCA + +config SYS_SOC + default "bcm6858" + +source "board/broadcom/bcmbca/Kconfig" + +endifarch/arm/mach-bcmbca/bcm6858/Makefile new file +5
-0@@ -0,0 +1,5 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# (C) Copyright 2022 Broadcom Ltd +# +obj-y += mmu_table.oarch/arm/mach-bcmbca/bcm6858/mmu_table.c new file +32
-0@@ -0,0 +1,32 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* +* Copyright 2022 Broadcom Ltd. +*/ +#include <common.h> +#include <asm/armv8/mmu.h> +#include <linux/sizes.h> + +static struct mm_region bcm96858_mem_map[] = { + { + .virt =0x00000000UL , + .phys =0x00000000UL , + .size =1UL *SZ_1G , + .attrs =PTE_BLOCK_MEMTYPE (MT_NORMAL ) | +PTE_BLOCK_INNER_SHARE + }, + { +/* SoC peripheral */ + .virt =0xff800000UL , + .phys =0xff800000UL , + .size =0x100000 , + .attrs =PTE_BLOCK_MEMTYPE (MT_DEVICE_NGNRNE ) | +PTE_BLOCK_NON_SHARE | +PTE_BLOCK_PXN |PTE_BLOCK_UXN + }, + { +/* List terminator */ +0 , + } +}; + +struct mm_region *mem_map = bcm96858_mem_map;board/broadcom/bcmbca/Kconfig +7
-0@@ -93,6 +93,13 @@ config SYS_CONFIG_NAME endif +if TARGET_BCM96858 + +config SYS_CONFIG_NAME + default "bcm96858" + +endif + if TARGET_BCM96878 config SYS_CONFIG_NAMEconfigs/bcm96858_defconfig new file +23
-0@@ -0,0 +1,23 @@ +CONFIG_ARM=y +CONFIG_COUNTER_FREQUENCY=50000000 +CONFIG_ARCH_BCMBCA=y +CONFIG_SYS_TEXT_BASE=0x01000000 +CONFIG_SYS_MALLOC_LEN=0x2000000 +CONFIG_SYS_MALLOC_F_LEN=0x8000 +CONFIG_BCM6858=y +CONFIG_TARGET_BCM96858=y +CONFIG_NR_DRAM_BANKS=2 +CONFIG_DEFAULT_DEVICE_TREE="bcm96858" +CONFIG_IDENT_STRING=" Broadcom BCM6858" +CONFIG_SYS_LOAD_ADDR=0x01000000 +CONFIG_ENV_VARS_UBOOT_CONFIG=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x2000000 +CONFIG_OF_STDOUT_VIA_ALIAS=y +CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_BOOTM_LEN=0x4000000 +CONFIG_CMD_CACHE=y +CONFIG_OF_EMBED=y +CONFIG_CLK=yinclude/configs/bcm96858.h new file +11
-0@@ -0,0 +1,11 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* +* (C) Copyright 2022 Broadcom Ltd. +*/ + +#ifndef __BCM96858_H +#define __BCM96858_H + +#define CONFIG_SYS_SDRAM_BASE 0x00000000 + +#endif
Re: [PATCH v2 1/3] arm: bcmbca: add bcm6858 SoC support under CONFIG_ARCH_BCMBCA
In reply to William ZhangQuoted 5 lines · William Zhang
BCM6858 is a Broadcom B53 based PON Gateway SoC. It is part of the BCA (Broadband Carrier Access origin) chipset family. Like other broadband SoC, this patch adds it under
CONFIG_BCM6858chip config andCONFIG_ARCH_BCMBCAplatform config.
Quoted 8 lines
This initial support includes a bare-bone implementation and the original dts is updated with the one from linux next git repository.
The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there to the console.
Signed-off-by William Zhang <[email protected]>Reviewed-by Philippe Reynes <[email protected]>
For the series, applied to u-boot/master, thanks!
Signature · 1 line
Tom
William Zhang
maintainerPATCH v2 2/3 arm: bcmbca: remove bcm6858 support under CONFIG_ARCH_BCM6858
In reply to William ZhangNow that BCM6858 is supported under CONFIG_ARCH_BCMBCA and CONFIG_BCM6858, remove the original ARCH_BCM6858 support and migrate its configuration and dts settings. This includes:
- Remove the bcm968580xref board folder. It is replaced by the generic bcmbca board folder.
- Update bcm968580xref board dts with the new compatible string.
- Delete broadcom_bcm968580xref.h and merge its setting to the new bcm96858.h file.
- Remove bcm968580xref_ram_defconfig as a basic config version of bcm96858_defconfig is now added.
---
(no changes since v1)
arch/arm/Kconfig | 7 --- arch/arm/dts/Makefile | 6 +- arch/arm/dts/bcm968580xref.dts | 4 +- board/broadcom/bcm968580xref/Kconfig | 17 ------ board/broadcom/bcm968580xref/MAINTAINERS | 6 -- board/broadcom/bcm968580xref/Makefile | 3 - board/broadcom/bcm968580xref/bcm968580xref.c | 62 ------------------- configs/bcm968580xref_ram_defconfig | 64 -------------------- include/configs/bcm96858.h | 4 ++ include/configs/broadcom_bcm968580xref.h | 32 ---------- 10 files changed, 8 insertions(+), 197 deletions(-) delete mode 100644 board/broadcom/bcm968580xref/Kconfig delete mode 100644 board/broadcom/bcm968580xref/MAINTAINERS delete mode 100644 board/broadcom/bcm968580xref/Makefile delete mode 100644 board/broadcom/bcm968580xref/bcm968580xref.c delete mode 100644 configs/bcm968580xref_ram_defconfig delete mode 100644 include/configs/broadcom_bcm968580xref.h
arch/arm/Kconfig +0 -7
@@ -672,12 +672,6 @@ config ARCH_BCM6753 select OF_CONTROL imply CMD_DM -config ARCH_BCM6858 - bool "Broadcom BCM6858 family" - select DM - select OF_CONTROL - imply CMD_DM - config ARCH_BCMSTB bool "Broadcom BCM7XXX family" select CPU_V7A
@@ -2274,7 +2268,6 @@ source "board/armltd/vexpress/Kconfig" source "board/armltd/vexpress64/Kconfig" source "board/cortina/presidio-asic/Kconfig" source "board/broadcom/bcm96753ref/Kconfig" -source "board/broadcom/bcm968580xref/Kconfig" source "board/broadcom/bcmns3/Kconfig" source "board/cavium/thunderx/Kconfig" source "board/eets/pdu001/Kconfig"
arch/arm/dts/Makefile +2 -4
@@ -1150,9 +1150,6 @@ dtb-$(CONFIG_ARCH_BCM283X) += \ dtb-$(CONFIG_ARCH_BCM6753) += \ bcm96753ref.dtb -dtb-$(CONFIG_ARCH_BCM6858) += \ - bcm968580xref.dtb - dtb-$(CONFIG_TARGET_BCMNS3) += ns3-board.dtb dtb-$(CONFIG_ARCH_BCMSTB) += bcm7xxx.dtb
@@ -1183,7 +1180,8 @@ dtb-$(CONFIG_BCM6856) += \ bcm96856.dtb \ bcm968360bg.dtb dtb-$(CONFIG_BCM6858) += \ - bcm96858.dtb + bcm96858.dtb \ + bcm968580xref.dtb dtb-$(CONFIG_BCM6878) += \ bcm96878.dtb
arch/arm/dts/bcm968580xref.dts +2 -2
@@ -8,8 +8,8 @@ #include "bcm6858.dtsi" / { - model = "Broadcom bcm68580xref"; - compatible = "broadcom,bcm68580xref", "brcm,bcm6858"; + model = "Broadcom BCM968580xref Reference Board"; + compatible = "brcm,bcm968580xref", "brcm,bcm6858", "brcm,bcmbca"; aliases { serial0 = &uart0;
board/broadcom/bcm968580xref/Kconfig deleted +0 -17
@@ -1,17 +0,0 @@ -if ARCH_BCM6858 - -config SYS_VENDOR - default "broadcom" - -config SYS_BOARD - default "bcm968580xref" - -config SYS_CONFIG_NAME - default "broadcom_bcm968580xref" - -endif - -config TARGET_BCM968580XREF - bool "Support Broadcom bcm968580xref" - depends on ARCH_BCM6858 - select ARM64
board/broadcom/bcm968580xref/MAINTAINERS deleted +0 -6
@@ -1,6 +0,0 @@ -BCM968580XREF BOARD -M: Philippe Reynes <[email protected]> -S: Maintained -F: board/broadcom/bcm968580xref/ -F: include/configs/broadcom_bcm968580xref.h -F: configs/bcm968580xref_ram_defconfig
board/broadcom/bcm968580xref/Makefile deleted +0 -3
@@ -1,3 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ - -obj-y += bcm968580xref.o
board/broadcom/bcm968580xref/bcm968580xref.c deleted +0 -62
62 lines not on this page · raw message
configs/bcm968580xref_ram_defconfig deleted +0 -64
64 lines not on this page · raw message
include/configs/bcm96858.h +4 -0
@@ -8,4 +8,8 @@#define CONFIG_SYS_SDRAM_BASE 0x00000000 +#ifdef CONFIG_MTD_RAW_NAND +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#endif /* CONFIG_MTD_RAW_NAND */ +#endif
include/configs/broadcom_bcm968580xref.h deleted +0 -32
@@ -1,32 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* -* Copyright (C) 2018 Philippe Reynes <[email protected]> -*/ - -#include <linux/sizes.h> - -/* -* common -*/ - -/* UART */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, \ - 230400, 500000, 1500000 } -/* Memory usage */ - -/* -* 6858 -*/ - -/* RAM */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 - -/* U-Boot */ - -#ifdef CONFIG_MTD_RAW_NAND -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#endif /* CONFIG_MTD_RAW_NAND */ - -/* -* 968580xref -*/
Signature · 1 line
2.37.1
Re: [PATCH v2 2/3] arm: bcmbca: remove bcm6858 support under CONFIG_ARCH_BCM6858
Hi William,
Le 22/08/2022 à 20:39, William Zhang a écrit :
Quoted 11 lines
Now that BCM6858 is supported under
CONFIG_ARCH_BCMBCAandCONFIG_BCM6858, remove the originalARCH_BCM6858support and migrate its configuration and dts settings. This includes:
- Remove the bcm968580xref board folder. It is replaced by the generic bcmbca board folder.
- Update bcm968580xref board dts with the new compatible string.
- Deletebroadcom_bcm968580xref.hand merge its setting to the newbcm96858.hfile.
- Removebcm968580xref_ram_defconfigas a basic config version ofbcm96858_defconfigis now added.
Quoted 1 line
Signed-off-by William Zhang <[email protected]>
Quoted 319 lines
---
(no changes since v1)
arch/arm/Kconfig | 7 --- arch/arm/dts/Makefile | 6 +- arch/arm/dts/bcm968580xref.dts | 4 +- board/broadcom/bcm968580xref/Kconfig | 17 ------ board/broadcom/bcm968580xref/MAINTAINERS | 6 -- board/broadcom/bcm968580xref/Makefile | 3 - board/broadcom/bcm968580xref/bcm968580xref.c | 62 ------------------- configs/bcm968580xref_ram_defconfig | 64 -------------------- include/configs/bcm96858.h | 4 ++ include/configs/broadcom_bcm968580xref.h | 32 ---------- 10 files changed, 8 insertions(+), 197 deletions(-)delete mode 100644 board/broadcom/bcm968580xref/Kconfig delete mode 100644 board/broadcom/bcm968580xref/MAINTAINERS delete mode 100644 board/broadcom/bcm968580xref/Makefile delete mode 100644
board/broadcom/bcm968580xref/bcm968580xref.cdelete mode 100644 configs/bcm968580xref_ram_defconfig delete mode 100644include/configs/broadcom_bcm968580xref.harch/arm/Kconfig +0
-7@@ -672,12 +672,6 @@ config ARCH_BCM6753 select OF_CONTROL imply CMD_DM -config ARCH_BCM6858 - bool "Broadcom BCM6858 family" - select DM - select OF_CONTROL - imply CMD_DM - config ARCH_BCMSTB bool "Broadcom BCM7XXX family" select CPU_V7A@@ -2274,7 +2268,6 @@ source "board/armltd/vexpress/Kconfig" source "board/armltd/vexpress64/Kconfig" source "board/cortina/presidio-asic/Kconfig" source "board/broadcom/bcm96753ref/Kconfig" -source "board/broadcom/bcm968580xref/Kconfig" source "board/broadcom/bcmns3/Kconfig" source "board/cavium/thunderx/Kconfig" source "board/eets/pdu001/Kconfig"arch/arm/dts/Makefile +2
-4@@ -1150,9 +1150,6 @@ dtb-$(CONFIG_ARCH_BCM283X) += \ dtb-$(CONFIG_ARCH_BCM6753) += \ bcm96753ref.dtb -dtb-$(CONFIG_ARCH_BCM6858) += \ - bcm968580xref.dtb - dtb-$(CONFIG_TARGET_BCMNS3) += ns3-board.dtb dtb-$(CONFIG_ARCH_BCMSTB) += bcm7xxx.dtb@@ -1183,7 +1180,8 @@ dtb-$(CONFIG_BCM6856) += \ bcm96856.dtb \ bcm968360bg.dtb dtb-$(CONFIG_BCM6858) += \ - bcm96858.dtb + bcm96858.dtb \ + bcm968580xref.dtb dtb-$(CONFIG_BCM6878) += \ bcm96878.dtbarch/arm/dts/bcm968580xref.dts +2
-2@@ -8,8 +8,8 @@ #include "bcm6858.dtsi" / { - model = "Broadcom bcm68580xref"; - compatible = "broadcom,bcm68580xref", "brcm,bcm6858"; + model = "Broadcom BCM968580xref Reference Board"; + compatible = "brcm,bcm968580xref", "brcm,bcm6858", "brcm,bcmbca"; aliases { serial0 = &uart0;board/broadcom/bcm968580xref/Kconfig deleted +0
-17@@ -1,17 +0,0 @@ -if ARCH_BCM6858 - -config SYS_VENDOR - default "broadcom" - -config SYS_BOARD - default "bcm968580xref" - -config SYS_CONFIG_NAME - default "broadcom_bcm968580xref" - -endif - -config TARGET_BCM968580XREF - bool "Support Broadcom bcm968580xref" - depends on ARCH_BCM6858 - select ARM64board/broadcom/bcm968580xref/MAINTAINERS deleted +0
-6@@ -1,6 +0,0 @@ -BCM968580XREF BOARD -M: Philippe Reynes <[email protected]> -S: Maintained -F: board/broadcom/bcm968580xref/ -F: include/configs/broadcom_bcm968580xref.h -F: configs/bcm968580xref_ram_defconfigboard/broadcom/bcm968580xref/Makefile deleted +0
-3@@ -1,3 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ - -obj-y += bcm968580xref.oboard/broadcom/bcm968580xref/bcm968580xref.c deleted +0
-62@@ -1,62 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* -* Copyright (C) 2018 Philippe Reynes <[email protected]> -*/ - -#include <common.h> -#include <fdtdec.h> -#include <init.h> -#include <linux/io.h> - -#ifdef CONFIG_ARM64 -#include <asm/armv8/mmu.h> - -static struct mm_region broadcom_bcm968580xref_mem_map[] = { - { -/* RAM */ - .virt =0x00000000UL , - .phys =0x00000000UL , - .size =8UL *SZ_1G , - .attrs =PTE_BLOCK_MEMTYPE (MT_NORMAL ) | -PTE_BLOCK_INNER_SHARE - }, { -/* SoC */ - .virt =0x80000000UL , - .phys =0x80000000UL , - .size =0xff80000000UL , - .attrs =PTE_BLOCK_MEMTYPE (MT_DEVICE_NGNRNE ) | -PTE_BLOCK_NON_SHARE | -PTE_BLOCK_PXN |PTE_BLOCK_UXN - }, { -/* List terminator */ -0 , - } -}; - -struct mm_region *mem_map = broadcom_bcm968580xref_mem_map; -#endif - -int board_init (void ) -{ -return 0 ; -} - -int dram_init (void ) -{ -if (fdtdec_setup_mem_size_base () !=0 ) -printf ("fdtdec_setup_mem_size_base() has failed\n" ); - -return 0 ; -} - -int dram_init_banksize (void ) -{ -fdtdec_setup_memory_banksize (); - -return 0 ; -} - -int print_cpuinfo (void ) -{ -return 0 ; -}configs/bcm968580xref_ram_defconfig deleted +0
-64@@ -1,64 +0,0 @@ -CONFIG_ARM=y -CONFIG_SKIP_LOWLEVEL_INIT=y -CONFIG_ARCH_BCM6858=y -CONFIG_SYS_TEXT_BASE=0x10000000 -CONFIG_SYS_MALLOC_LEN=0x100000 -CONFIG_SYS_MALLOC_F_LEN=0x8000 -CONFIG_NR_DRAM_BANKS=1 -CONFIG_ENV_SIZE=0x2000 -CONFIG_DM_GPIO=y -CONFIG_DEFAULT_DEVICE_TREE="bcm968580xref" -CONFIG_SYS_LOAD_ADDR=0x10000000 -CONFIG_TARGET_BCM968580XREF=y -CONFIG_ENV_VARS_UBOOT_CONFIG=y -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x11000000 -CONFIG_FIT=y -CONFIG_FIT_SIGNATURE=y -CONFIG_FIT_VERBOSE=y -CONFIG_LEGACY_IMAGE_FORMAT=y -CONFIG_SUPPORT_RAW_INITRD=y -CONFIG_DISPLAY_BOARDINFO_LATE=y -CONFIG_HUSH_PARSER=y -CONFIG_SYS_MAXARGS=24 -CONFIG_SYS_CBSIZE=256 -CONFIG_SYS_PBSIZE=276 -CONFIG_SYS_BOOTM_LEN=0x800000 -CONFIG_CMD_GPIO=y -CONFIG_CMD_MTD=y -CONFIG_CMD_NAND=y -CONFIG_CMD_PART=y -CONFIG_CMD_SPI=y -CONFIG_DOS_PARTITION=y -CONFIG_ISO_PARTITION=y -CONFIG_EFI_PARTITION=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -# CONFIG_NET is not set -CONFIG_BLK=y -CONFIG_CLK=y -CONFIG_BCM6345_GPIO=y -CONFIG_LED=y -CONFIG_LED_BCM6858=y -CONFIG_LED_BLINK=y -# CONFIG_MMC is not set -CONFIG_MTD=y -CONFIG_DM_MTD=y -CONFIG_MTD_RAW_NAND=y -CONFIG_NAND_BRCMNAND=y -CONFIG_NAND_BRCMNAND_6858=y -CONFIG_SYS_NAND_ONFI_DETECTION=y -CONFIG_DM_SPI_FLASH=y -CONFIG_SPI_FLASH_SFDP_SUPPORT=y -CONFIG_SPI_FLASH_MACRONIX=y -CONFIG_SPECIFY_CONSOLE_INDEX=y -CONFIG_CONS_INDEX=0 -CONFIG_DM_SERIAL=y -CONFIG_SERIAL_SEARCH_ALL=y -CONFIG_BCM6345_SERIAL=y -CONFIG_SPI=y -CONFIG_DM_SPI=y -CONFIG_BCM63XX_HSSPI=y -CONFIG_SYSRESET=y -CONFIG_SYSRESET_WATCHDOG=y -CONFIG_WDT_BCM6345=y -# CONFIG_GENERATE_SMBIOS_TABLE is not setinclude/configs/bcm96858.h +4
-0@@ -8,4 +8,8 @@#define CONFIG_SYS_SDRAM_BASE 0x00000000 +#ifdef CONFIG_MTD_RAW_NAND +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#endif /* CONFIG_MTD_RAW_NAND */ +#endif include/configs/broadcom_bcm968580xref.h deleted +0
-32@@ -1,32 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* -* Copyright (C) 2018 Philippe Reynes <[email protected]> -*/ - -#include <linux/sizes.h> - -/* -* common -*/ - -/* UART */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, \ - 230400, 500000, 1500000 } -/* Memory usage */ - -/* -* 6858 -*/ - -/* RAM */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 - -/* U-Boot */ - -#ifdef CONFIG_MTD_RAW_NAND -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#endif /* CONFIG_MTD_RAW_NAND */ - -/* -* 968580xref -*/
William Zhang
maintainerPATCH v2 3/3 arm: bcmbca: replace ARCH_BCM6858 symbols in Kconfig with BCM6858
In reply to William ZhangAs CONFIG_ARCH_BCM6858 is replaced with CONFIG_BCM6858, update the driver Kconfig to use the new config symbol.
---
Changes in v2:
-Update subject line to be more clear for patch 3
drivers/gpio/Kconfig | 3 +-- drivers/led/Kconfig | 2 +- drivers/mtd/nand/raw/Kconfig | 2 +- drivers/spi/Kconfig | 3 +-- drivers/watchdog/Kconfig | 3 +-- 5 files changed, 5 insertions(+), 8 deletions(-)
drivers/gpio/Kconfig +1 -2
@@ -111,8 +111,7 @@ config BCM2835_GPIO config BCM6345_GPIO bool "BCM6345 GPIO driver" depends on DM_GPIO && (ARCH_BMIPS || BCM6856 || \ - ARCH_BCM6858 || BCM63158 || \ - ARCH_BCM6753) + BCM6858 || BCM63158 || ARCH_BCM6753) help This driver supports the GPIO banks on BCM6345 SoCs.
drivers/led/Kconfig +1 -1
@@ -37,7 +37,7 @@ config LED_BCM6753 config LED_BCM6858 bool "LED Support for BCM6858" - depends on LED && (BCM6856 || ARCH_BCM6858 || BCM63158) + depends on LED && (BCM6856 || BCM6858 || BCM63158) help This option enables support for LEDs connected to the BCM6858 HW has blinking capabilities and up to 32 LEDs can be controlled.
drivers/mtd/nand/raw/Kconfig +1 -1
@@ -115,7 +115,7 @@ config NAND_BRCMNAND_6838 config NAND_BRCMNAND_6858 bool "Support Broadcom NAND controller on bcm6858" - depends on NAND_BRCMNAND && ARCH_BCM6858 + depends on NAND_BRCMNAND && BCM6858 help Enable support for broadcom nand driver on bcm6858.
drivers/spi/Kconfig +1 -2
@@ -91,8 +91,7 @@ config ATMEL_SPI config BCM63XX_HSSPI bool "BCM63XX HSSPI driver" - depends on (ARCH_BMIPS || BCM6856 || \ - ARCH_BCM6858 || BCM63158) + depends on (ARCH_BMIPS || BCM6856 || BCM6858 || BCM63158) help Enable the BCM6328 HSSPI driver. This driver can be used to access the SPI NOR flash on platforms embedding this Broadcom
drivers/watchdog/Kconfig +1 -2
@@ -129,8 +129,7 @@ config WDT_AT91 config WDT_BCM6345 bool "BCM6345 watchdog timer support" depends on WDT && (ARCH_BMIPS || BCM6856 || \ - ARCH_BCM6858 || BCM63158 || \ - ARCH_BCM6753) + BCM6858 || BCM63158 || ARCH_BCM6753) help Select this to enable watchdog timer for BCM6345 SoCs. The watchdog timer is stopped when initialized.
Signature · 1 line
2.37.1
Re: [PATCH v2 3/3] arm: bcmbca: replace ARCH_BCM6858 symbols in Kconfig with BCM6858
Hi William,
Le 22/08/2022 à 20:39, William Zhang a écrit :
Quoted 4 lines
As
CONFIG_ARCH_BCM6858is replaced withCONFIG_BCM6858, update the driverKconfigto use the new config symbol.Signed-off-by William Zhang <[email protected]>
Quoted 81 lines
---
Changes in v2:
(quoted diff) +0
-1-Update subject line to be more clear for patch 3 drivers/gpio/Kconfig | 3 +-- drivers/led/Kconfig | 2 +- drivers/mtd/nand/raw/Kconfig | 2 +- drivers/spi/Kconfig | 3 +-- drivers/watchdog/Kconfig | 3 +-- 5 files changed, 5 insertions(+), 8 deletions(-)drivers/gpio/Kconfig +1
-2@@ -111,8 +111,7 @@ config BCM2835_GPIO config BCM6345_GPIO bool "BCM6345 GPIO driver" depends on DM_GPIO && (ARCH_BMIPS || BCM6856 || \ - ARCH_BCM6858 || BCM63158 || \ - ARCH_BCM6753) + BCM6858 || BCM63158 || ARCH_BCM6753) help This driver supports the GPIO banks on BCM6345 SoCs.drivers/led/Kconfig +1
-1@@ -37,7 +37,7 @@ config LED_BCM6753 config LED_BCM6858 bool "LED Support for BCM6858" - depends on LED && (BCM6856 || ARCH_BCM6858 || BCM63158) + depends on LED && (BCM6856 || BCM6858 || BCM63158) help This option enables support for LEDs connected to the BCM6858 HW has blinking capabilities and up to 32 LEDs can be controlled.drivers/mtd/nand/raw/Kconfig +1
-1@@ -115,7 +115,7 @@ config NAND_BRCMNAND_6838 config NAND_BRCMNAND_6858 bool "Support Broadcom NAND controller on bcm6858" - depends on NAND_BRCMNAND && ARCH_BCM6858 + depends on NAND_BRCMNAND && BCM6858 help Enable support for broadcom nand driver on bcm6858.drivers/spi/Kconfig +1
-2@@ -91,8 +91,7 @@ config ATMEL_SPI config BCM63XX_HSSPI bool "BCM63XX HSSPI driver" - depends on (ARCH_BMIPS || BCM6856 || \ - ARCH_BCM6858 || BCM63158) + depends on (ARCH_BMIPS || BCM6856 || BCM6858 || BCM63158) help Enable the BCM6328 HSSPI driver. This driver can be used to access the SPI NOR flash on platforms embedding this Broadcomdrivers/watchdog/Kconfig +1
-2@@ -129,8 +129,7 @@ config WDT_AT91 config WDT_BCM6345 bool "BCM6345 watchdog timer support" depends on WDT && (ARCH_BMIPS || BCM6856 || \ - ARCH_BCM6858 || BCM63158 || \ - ARCH_BCM6753) + BCM6858 || BCM63158 || ARCH_BCM6753) help Select this to enable watchdog timer for BCM6345 SoCs. The watchdog timer is stopped when initialized.