net: wwan: iosm: fix invalid mux header type
Subsystems (4)
PATCH 3/3 net: wwan: iosm: fix invalid mux header type
From: M Chetan Kumar <[email protected]>
Data stall seen during peak DL throughput test & packets are dropped by mux layer due to invalid header type in datagram.
During initlization Mux aggregration protocol is set to default UL/DL size and TD count of Mux lite protocol. This configuration mismatch between device and driver is resulting in data stall/packet drops.
Override the UL/DL size and TD count for Mux aggregation protocol.
Fixes 1f52d7b62285 ("net: wwan: iosm: Enable M.2 7360 WWAN card support")
Signed-off-by M Chetan Kumar <[email protected]>
--- drivers/net/wwan/iosm/iosm_ipc_imem_ops.c | 8 ++++++++ drivers/net/wwan/iosm/iosm_ipc_mux.h | 1 + 2 files changed, 9 insertions(+)
drivers/net/wwan/iosm/iosm_ipc_imem_ops.c +8 -0
@@ -91,6 +91,14 @@ void ipc_imem_wwan_channel_init(struct iosm_imem *ipc_imem, }ipc_chnl_cfg_get (&chnl_cfg, ipc_imem->nr_of_channels); + +if (ipc_imem->mmio->mux_protocol ==MUX_AGGREGATION && + ipc_imem->nr_of_channels ==IPC_MEM_IP_CHL_ID_0 ) { + chnl_cfg.ul_nr_of_entries =IPC_MEM_MAX_TDS_MUX_AGGR_UL ; + chnl_cfg.dl_nr_of_entries =IPC_MEM_MAX_TDS_MUX_AGGR_DL ; + chnl_cfg.dl_buf_size =IPC_MEM_MAX_ADB_BUF_SIZE ; + } +ipc_imem_channel_init (ipc_imem,IPC_CTYPE_WWAN , chnl_cfg,IRQ_MOD_OFF );
drivers/net/wwan/iosm/iosm_ipc_mux.h +1 -0
@@ -10,6 +10,7 @@#define IPC_MEM_MAX_UL_DG_ENTRIES 100#define IPC_MEM_MAX_TDS_MUX_AGGR_UL 60 +#define IPC_MEM_MAX_TDS_MUX_AGGR_DL 60#define IPC_MEM_MAX_ADB_BUF_SIZE (16 * 1024)#define IPC_MEM_MAX_UL_ADB_BUF_SIZE IPC_MEM_MAX_ADB_BUF_SIZE
Signature · 1 line
2.34.1