Skip to contentSkip to conversation

rng-tools: Add Arm aarch64 CPU specific configuration to address excessive CPU usage on startup

PATCH New Xiangyu Chen 1 participant 1 message Nov 1, 2022

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 rng-tools: Add Arm aarch64 CPU specific configuration to address excessive CPU usage on startup

With the default jitter options aarch64 CPU-based devices typically experience continuous high CPU utilisation for several minutes after rngd starts.

Accoring to the rng-tools issue #150[1] and comments[2],in order to address this, the following configuration changes have been made, those configurations also can be found on Alpine Linux[3]:

- reduce the number of threads used to 1 in total, rather than 1 per core.
- reduce the buffer size from 16535 to 4133 which reduces the time taken to fill the buffer (and so reduces the duration of CPU load).

[1] https://github.com/nhorman/rng-tools/issues/150
[2] https://github.com/nhorman/rng-tools/issues/150#issuecomment-953079212
[3] https://git.alpinelinux.org/aports/tree/main/rng-tools/rngd.confd-arm

---
Changes in V2:
*put the aarch64 specific default file in meta/recipes-support/rng-tools/rng-tools/aarch64

---
 .../rng-tools/rng-tools/aarch64/default               | 11 +++++++++++
 1 file changed, 11 insertions(+)
 create mode 100644 meta/recipes-support/rng-tools/rng-tools/aarch64/default
meta/recipes-support/rng-tools/rng-tools/aarch64/default new file +11 -0
new file mode 100644
index 0000000000..5a2fbcc9ef
@@ -0,0 +1,11 @@
+# With the default jitter options Arm CPU-based devices typically experience
+# continuous high CPU utilisation for several minutes after rngd starts.
+# See https://gitlab.alpinelinux.org/alpine/aports/-/issues/13035 and
+# https://github.com/nhorman/rng-tools/issues/150
+# In order to address this the following configuration changes have been made:
+#
+#   - reduce the number of threads used to 1 in total, rather than 1 per core.
+#   - reduce the buffer size from 16535 to 4133 which reduces the time taken
+#     to fill the buffer (and so reduces the duration of CPU load).
+#
+EXTRA_ARGS="-r /dev/hwrng -O jitter:buffer_size:4133 -O jitter:refill_thresh:4133 -O jitter:thread_count:1"
Signature · 1 line
2.34.1