address deprecated warnings
Mimi Zohar
maintainerv4 cover address deprecated warnings
Between travis/ci and OpenSSL v3 a large number of deprecated warnings are being emitted when compiling ima-evm-utils. Start addressing these deprecated warnings by replacing the low level SHA1 and HMAC calls with the EVP_ functions. IMA signature version 1 also uses low level calls, but instead of fixing it, deprecate it as nobody should be using it anyway.
OpenSSL v3 "engine" support is deprecated and replaced with "providers". Engine support will continue to work for a while, but results in deprecated declaration and other messages. Define a "--disable-engine" and the equivalent "--enable-engine=no" configuration option.
Changelog v4:
Based on Vitaly's comments:
- instead of setting errno to zero, define a macro to log a message with the errno and reset errno.
- verify ENGINE_init symbol is defined in libcrypto.
- disable engine support if either OPENSSL_NO_DYNAMIC_ENGINE or OPENSSL_NO_ENGINE variables are defined.
- Rename CONFIG_ENGINE to CONFIG_IMA_EVM_ENGINE
Changelog v3:
- Make the SM2/SM3 tests dependent on the OpenSSL v3, rather than compiling OpenSSL v3, based on Vitaly's suggestion.
- Re-use the existing infrastructure for compiling OpenSSL to compile OpenSSL without engine support. ima-evm-utils compiles cleanly without any deprecated messages.
- Instead of using the distro OpenSSL version on jammy, compile OpenSSL to test building ima-evm-utils without OpenSSL engine support.
- Make sure the keyfile is a regular file before using it.
- Based on Vitaly's suggestion: undefine CONFIG_ENGINE when OpenSSL engine support is not configured, run the tests normally without checking whether engine support is configured.
- Add Stefan's Reviewed-by tags.
Changelog v2:
- Based on Vitaly's comments, base enabling engine support on OPENSSL_NO_ENGINE/OPENSSL_NO_DYNAMIC_ENGINE support. Also don't limit disabling ima-evm-utils engine support to v3, make it generic.
- Added Stefan's Reviewed-by tags.
Changelog v1:
- Based on Stefan's comments, removed deprecated functions when not used and added missing word. Updated the usage and options accordingly.
- Based on Vitaly's comments, explicitly require "--disable-engine" configuration to compile ima-evm-utils without OpenSSL v3 engine support and typo.
- Based on Petr's comments, addressed the "return 77" by removing it, updated the travis patch description, and added his Reviewed-by tags.
Mimi Zohar (17):
Revert "Reset 'errno' after failure to open or access a file" log and reset 'errno' after failure to open non-critical files Log and reset 'errno' on lsetxattr failure
travis: update dist=focal
Update configure.ac to address a couple of obsolete warnings Deprecate IMA signature version 1
Replace the low level SHA1 calls when calculating the TPM 1.2 PCRs Replace the low level HMAC calls when calculating the EVM HMAC Add missing EVP_MD_CTX_free() call in calc_evm_hash() Disable use of OpenSSL "engine" support
Fix potential use after free in read_tpm_banks()
Limit the file hash algorithm name length
Missing template data size lower bounds checking
Base sm2/sm3 test on openssl version installed
Compile a newer version of OpenSSL
Build OpenSSL without engine support
Fix d2i_x509_fp failure
.github/workflows/ci.yml | 10 +- .travis.yml | 10 +- acinclude.m4 | 2 +- build.sh | 8 ++ configure.ac | 16 ++- m4/manpage-docbook-xsl.m4 | 2 +- src/Makefile.am | 18 +++ src/evmctl.c | 282 ++++++++++++++++++++++++++------------ src/imaevm.h | 6 + src/libimaevm.c | 44 ++++-- tests/install-openssl3.sh | 9 +- tests/sign_verify.test | 25 ++-- 12 files changed, 311 insertions(+), 121 deletions(-)
Signature · 1 line
2.31.1
Mimi Zohar
maintainerPATCH v4 1/17 Revert "Reset 'errno' after failure to open or access a file"
This reverts commit acb19d1894a4a95471b8d2346cd6c3ecf3385110.
--- src/evmctl.c | 18 ++---------------- src/libimaevm.c | 4 ---- 2 files changed, 2 insertions(+), 20 deletions(-)
src/evmctl.c +2 -16
@@ -182,7 +182,6 @@ static int bin2file(const char *file, const char *ext, const unsigned char *data fp =fopen (name,"w" );if (!fp) {log_err ("Failed to open: %s\n" , name); - errno =0 ;return -1 ; } err =fwrite (data, len,1 , fp);
@@ -208,7 +207,6 @@ static unsigned char *file2bin(const char *file, const char *ext, int *size) fp =fopen (name,"r" );if (!fp) {log_err ("Failed to open: %s\n" , name); - errno =0 ;return NULL ; }if (fstat (fileno (fp), &stats) ==-1 ) {
@@ -315,10 +313,8 @@ static int get_uuid(struct stat *st, char *uuid)sprintf (path,"blkid -s UUID -o value /dev/block/%u:%u" , major, minor); fp =popen (path,"r" ); -if (!fp) { - errno =0 ; +if (!fp) goto err; - } len =fread (_uuid,1 ,sizeof (_uuid), fp);pclose (fp);
@@ -375,7 +371,6 @@ static int calc_evm_hash(const char *file, unsigned char *hash)if (fd <0 ) {log_err ("Failed to open: %s\n" , file); - errno =0 ;return -1 ; }if (ioctl (fd,FS_IOC_GETVERSION , &generation)) {
@@ -1201,7 +1196,6 @@ static int calc_evm_hmac(const char *file, const char *keyfile, unsigned char *hif (fd <0 ) {log_err ("Failed to open %s\n" , file); - errno =0 ; goto out; }if (ioctl (fd,FS_IOC_GETVERSION , &generation)) {
@@ -1392,7 +1386,6 @@ static int ima_fix(const char *path) fd =open (path,O_RDONLY );if (fd <0 ) {log_errno ("Failed to open file: %s" , path); - errno =0 ;return -1 ; }
@@ -1916,10 +1909,8 @@ static int read_sysfs_pcrs(int num_banks, struct tpm_bank_info *tpm_banks)int i, result; fp =fopen (pcrs,"r" ); -if (!fp) { +if (!fp) fp =fopen (misc_pcrs,"r" ); - errno =0 ; - }if (!fp)return -1 ;
@@ -1982,7 +1973,6 @@ static int read_file_pcrs(int num_banks, struct tpm_bank_info *tpm_banks) fp =fopen (path,"r" );if (!fp) {log_err ("Could not open '%s'\n" , path); - errno =0 ;return -1 ; }
@@ -2075,7 +2065,6 @@ static int ima_measurement(const char *file) fp =fopen (file,"rb" );if (!fp) {log_err ("Failed to open measurement file: %s\n" , file); - errno =0 ;return -1 ; }
@@ -2321,7 +2310,6 @@ static int read_binary_bios_measurements(char *file, struct tpm_bank_info *bank) fp =fopen (file,"r" );if (!fp) {log_errno ("Failed to open TPM 1.2 event log.\n" ); - errno =0 ;return 1 ; }
@@ -2758,8 +2746,6 @@ int main(int argc, char *argv[])unsigned long keyid;char *eptr; - errno =0 ;/* initialize errno */ -#if !(OPENSSL_VERSION_NUMBER <0x10100000 ) OPENSSL_init_crypto(#ifndef DISABLE_OPENSSL_CONF
src/libimaevm.c +0 -4
@@ -144,7 +144,6 @@ static int add_file_hash(const char *file, EVP_MD_CTX *ctx) fp =fopen (file,"r" );if (!fp) {log_err ("Failed to open: %s\n" , file); - errno =0 ;return -1 ; }
@@ -259,7 +258,6 @@ EVP_PKEY *read_pub_pkey(const char *keyfile, int x509)if (!fp) {if (imaevm_params.verbose >LOG_INFO )log_info ("Failed to open keyfile: %s\n" , keyfile); - errno =0 ;return NULL ; }
@@ -878,7 +876,6 @@ static int read_keyid_from_cert(uint32_t *keyid_be, const char *certfile, int trif (!(fp =fopen (certfile,"r" ))) {log_err ("Cannot open %s: %s\n" , certfile,strerror (errno)); - errno =0 ;return -1 ; }if (!PEM_read_X509 (fp, &x,NULL ,NULL )) {
@@ -970,7 +967,6 @@ static EVP_PKEY *read_priv_pkey(const char *keyfile, const char *keypass) fp =fopen (keyfile,"r" );if (!fp) {log_err ("Failed to open keyfile: %s\n" , keyfile); - errno =0 ;return NULL ; } pkey =PEM_read_PrivateKey (fp,NULL ,NULL , (void *)keypass);
Signature · 1 line
2.31.1
Re: [PATCH ima-evm-utils v4 01/17] Revert "Reset 'errno' after failure to open or access a file"
Quoted 1 line · Mimi Zohar
This reverts commit
acb19d1894a4a95471b8d2346cd6c3ecf3385110.
$ git show acb19d1 fatal: ambiguous argument 'acb19d1': unknown revision or path not in the working tree.
Are you reverting this from a public tree? or could you just drop this patch from your series?
Also after removing this patch from the mbox file I cannot apply these patches to my sourceforge checkout -- presumably next-testing branch:
$ git am ./v4_20221101_zohar_address_deprecated_warnings.mbx Applying: log and reset 'errno' after failure to open non-critical files Applying: Log and reset 'errno' on lsetxattr failure Applying: travis: update dist=focal Applying: Update configure.ac to address a couple of obsolete warnings Applying: Deprecate IMA signature version 1 error: patch failed: src/libimaevm.c:684 error: src/libimaevm.c: patch does not apply Patch failed at 0005 Deprecate IMA signature version 1 hint: Use 'git am --show-current-patch=diff' to see the failed patch When you have resolved this problem, run "git am --continue". If you prefer to skip this patch, run "git am --skip" instead. To restore the original branch and stop patching, run "git am --abort".
Stefan
Mimi Zohar
maintainerRe: [PATCH ima-evm-utils v4 01/17] Revert "Reset 'errno' after failure to open or access a file"
Hi Stefan,
Quoted 11 lines · Stefan Berger
Quoted 1 line · Mimi Zohar
This reverts commit
acb19d1894a4a95471b8d2346cd6c3ecf3385110.$ git show acb19d1 fatal: ambiguous argument 'acb19d1': unknown revision or path not in the working tree.Are you reverting this from a public tree? or could you just drop this patch from your series?
Also after removing this patch from the mbox file I cannot apply these patches to my sourceforge checkout -- presumably next-testing branch:
Quoted 13 lines
$ git am ./v4_20221101_zohar_address_deprecated_warnings.mbx Applying: log and reset 'errno' after failure to open non-critical files Applying: Log and reset 'errno' on lsetxattr failure Applying: travis: update dist=focal Applying: Update configure.ac to address a couple of obsolete warnings Applying: Deprecate IMA signature version 1 error: patch failed: src/libimaevm.c:684 error: src/libimaevm.c: patch does not apply Patch failed at 0005 Deprecate IMA signature version 1 hint: Use 'git am --show-current-patch=diff' to see the failed patch When you have resolved this problem, run "git am --continue". If you prefer to skip this patch, run "git am --skip" instead. To restore the original branch and stop patching, run "git am --abort".
Sorry, I should have used "--base=auto" when generating the patch set. Yes, the patch set is based on the github next-testing branch.
thanks,
Mimi
Re: [PATCH ima-evm-utils v4 01/17] Revert "Reset 'errno' after failure to open or access a file"
Quoted 28 lines · Mimi Zohar
Hi Stefan,
Quoted 11 lines · Stefan Berger
Quoted 1 line · Mimi Zohar
This reverts commit
acb19d1894a4a95471b8d2346cd6c3ecf3385110.$ git show acb19d1 fatal: ambiguous argument 'acb19d1': unknown revision or path not in the working tree.Are you reverting this from a public tree? or could you just drop this patch from your series?
Also after removing this patch from the mbox file I cannot apply these patches to my sourceforge checkout -- presumably next-testing branch:
Quoted 13 lines
$ git am ./v4_20221101_zohar_address_deprecated_warnings.mbx Applying: log and reset 'errno' after failure to open non-critical files Applying: Log and reset 'errno' on lsetxattr failure Applying: travis: update dist=focal Applying: Update configure.ac to address a couple of obsolete warnings Applying: Deprecate IMA signature version 1 error: patch failed: src/libimaevm.c:684 error: src/libimaevm.c: patch does not apply Patch failed at 0005 Deprecate IMA signature version 1 hint: Use 'git am --show-current-patch=diff' to see the failed patch When you have resolved this problem, run "git am --continue". If you prefer to skip this patch, run "git am --skip" instead. To restore the original branch and stop patching, run "git am --abort".
Quoted 3 lines
Sorry, I should have used "--base=auto" when generating the patch set. Yes, the patch set is based on the github next-testing branch.
Is the github repo now the main repo and sourceforge repo is dead?
Quoted 4 lines
thanks,
Mimi
Mimi Zohar
maintainerRe: [PATCH ima-evm-utils v4 01/17] Revert "Reset 'errno' after failure to open or access a file"
Quoted 30 lines · Stefan Berger
Quoted 28 lines · Mimi Zohar
Hi Stefan,
Quoted 24 lines · Stefan Berger
Quoted 1 line · Mimi Zohar
This reverts commit
acb19d1894a4a95471b8d2346cd6c3ecf3385110.$ git show acb19d1 fatal: ambiguous argument 'acb19d1': unknown revision or path not in the working tree.Are you reverting this from a public tree? or could you just drop this patch from your series?
Also after removing this patch from the mbox file I cannot apply these patches to my sourceforge checkout -- presumably next-testing branch:
$ git am ./v4_20221101_zohar_address_deprecated_warnings.mbx Applying: log and reset 'errno' after failure to open non-critical files Applying: Log and reset 'errno' on lsetxattr failure Applying: travis: update dist=focal Applying: Update configure.ac to address a couple of obsolete warnings Applying: Deprecate IMA signature version 1 error: patch failed: src/libimaevm.c:684 error: src/libimaevm.c: patch does not apply Patch failed at 0005 Deprecate IMA signature version 1 hint: Use 'git am --show-current-patch=diff' to see the failed patch When you have resolved this problem, run "git am --continue". If you prefer to skip this patch, run "git am --skip" instead. To restore the original branch and stop patching, run "git am --abort".
Quoted 5 lines
Quoted 3 lines
Sorry, I should have used "--base=auto" when generating the patch set. Yes, the patch set is based on the github next-testing branch.
Is the github repo now the main repo and sourceforge repo is dead?
The "next" branch in both repo's are the same. Before posting patches,
I verify that github Actions works. As a result, the next-testing
branch on github is rebased frequently. Once a patch set is ready, the "next" branch in both repo's is updated.
To answer your question the github repo is primary.
Mimi
Re: [PATCH ima-evm-utils v4 01/17] Revert "Reset 'errno' after failure to open or access a file"
Quoted 35 lines · Stefan Berger
Quoted 32 lines · Mimi Zohar
Quoted 30 lines
Hi Stefan,
Quoted 10 lines · Stefan Berger
Quoted 1 line · Mimi Zohar
This reverts commit
acb19d1894a4a95471b8d2346cd6c3ecf3385110.$ git show acb19d1 fatal: ambiguous argument 'acb19d1': unknown revision or path not in the working tree.Are you reverting this from a public tree? or could you just drop this patch from your series?
Also after removing this patch from the mbox file I cannot apply these patches to my sourceforge checkout -- presumably next-testing branch:
Quoted 13 lines
$ git am ./v4_20221101_zohar_address_deprecated_warnings.mbx Applying: log and reset 'errno' after failure to open non-critical files Applying: Log and reset 'errno' on lsetxattr failure Applying: travis: update dist=focal Applying: Update configure.ac to address a couple of obsolete warnings Applying: Deprecate IMA signature version 1 error: patch failed: src/libimaevm.c:684 error: src/libimaevm.c: patch does not apply Patch failed at 0005 Deprecate IMA signature version 1 hint: Use 'git am --show-current-patch=diff' to see the failed patch When you have resolved this problem, run "git am --continue". If you prefer to skip this patch, run "git am --skip" instead. To restore the original branch and stop patching, run "git am --abort".Sorry, I should have used "--base=auto" when generating the patch set. Yes, the patch set is based on the github next-testing branch.
Quoted 8 lines
Quoted 1 line
Is the github repo now the main repo and sourceforge repo is dead?
The "next" branch in both repo's are the same. Before posting patches,
I verify that github Actions works. As a result, the next-testing
branch on github is rebased frequently. Once a patch set is ready, the "next" branch in both repo's is updated.To answer your question the github repo is primary.
Maybe deleting everything in sourceforge and ad put single file with link to github.com would save you work (having master, next and next-testing branches with this file).
Kind regards,
Petr
Quoted 1 line
Mimi
Mimi Zohar
maintainerRe: [PATCH ima-evm-utils v4 01/17] Revert "Reset 'errno' after failure to open or access a file"
Hi Petr,
Quoted 11 lines
Quoted 8 lines
Quoted 1 line
Is the github repo now the main repo and sourceforge repo is dead?
The "next" branch in both repo's are the same. Before posting patches,
I verify that github Actions works. As a result, the next-testing
branch on github is rebased frequently. Once a patch set is ready, the "next" branch in both repo's is updated.To answer your question the github repo is primary.
Maybe deleting everything in sourceforge and ad put single file with link to github.com would save you work (having master, next and next-testing branches with this file).
Thanks, definitely appreciate time saving tips! Vitaly suggested saving the sourceforge wiki info in ima-evm-utils and updating the file(s) like any other file. Before removing "everything"h from sourceforge, that still needs to be done.
Signature · 3 lines
thanks, Mimi
Re: [PATCH ima-evm-utils v4 01/17] Revert "Reset 'errno' after failure to open or access a file"
Quoted 10 lines · Mimi Zohar
Hi Petr,
Quoted 8 lines
Quoted 8 lines
Quoted 1 line
Is the github repo now the main repo and sourceforge repo is dead?
The "next" branch in both repo's are the same. Before posting patches,
I verify that github Actions works. As a result, the next-testing
branch on github is rebased frequently. Once a patch set is ready, the "next" branch in both repo's is updated.To answer your question the github repo is primary.
Quoted 8 lines
Quoted 3 lines
Maybe deleting everything in sourceforge and ad put single file with link to github.com would save you work (having master, next and next-testing branches with this file).
Thanks, definitely appreciate time saving tips! Vitaly suggested saving the sourceforge wiki info in ima-evm-utils and updating the file(s) like any other file. Before removing "everything"h from sourceforge, that still needs to be done.
I thought markdown should be downloaded from Edit interface, which is not available on SF for non-admins. But I found recently how to download it in Json format via Allura API:
curl -s https://sourceforge.net/rest/p/linux-ima/wiki/Home | jq -r .text
Then only end-of-lines need to be fixed.
Thanks,
Quoted 5 lines
Signature · 4 lines
-- thanks, Mimi
Mimi Zohar
maintainerRe: [PATCH ima-evm-utils v4 01/17] Revert "Reset 'errno' after failure to open or access a file"
Quoted 20 lines · Vitaly Chikunov
Quoted 10 lines · Mimi Zohar
Hi Petr,
Quoted 8 lines
Quoted 8 lines
Quoted 1 line
Is the github repo now the main repo and sourceforge repo is dead?
The "next" branch in both repo's are the same. Before posting patches,
I verify that github Actions works. As a result, the next-testing
branch on github is rebased frequently. Once a patch set is ready, the "next" branch in both repo's is updated.To answer your question the github repo is primary.
Quoted 8 lines
Quoted 3 lines
Maybe deleting everything in sourceforge and ad put single file with link to github.com would save you work (having master, next and next-testing branches with this file).
Thanks, definitely appreciate time saving tips! Vitaly suggested saving the sourceforge wiki info in ima-evm-utils and updating the file(s) like any other file. Before removing "everything"h from sourceforge, that still needs to be done.
Quoted 7 lines
I thought markdown should be downloaded from Edit interface, which is not available on SF for non-admins. But I found recently hbow to download it in Json format via Allura API:
curl -s https://sourceforge.net/rest/p/linux-ima/wiki/Home | jq -r .text
Then only end-of-lines need to be fixed.
There's an admin option to export the wiki, but this is much better.
Signature · 3 lines
thanks, Mimi
Mimi Zohar
maintainerPATCH v4 2/17 log and reset 'errno' after failure to open non-critical files
In reply to Mimi ZoharDefine a log_errno_reset macro to emit the errno string at or near the time of error, similar to the existing log_errno macro, but also reset errno to avoid dangling or duplicate errno messages on exit.
The initial usage is for non-critical file open failures.
--- src/evmctl.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-)
src/evmctl.c +10 -2
@@ -166,6 +166,9 @@ struct tpm_bank_info {static char *pcrfile[MAX_PCRFILE ];static unsigned npcrfile; +#define log_errno_reset(level, fmt, args...) \ + {do_log(level, fmt " (errno: %s)\n", ##args, strerror(errno)); errno = 0; } +static int bin2file (const char *file,const char *ext,const unsigned char *data,int len) {FILE *fp;
@@ -1911,8 +1914,10 @@ static int read_sysfs_pcrs(int num_banks, struct tpm_bank_info *tpm_banks) fp =fopen (pcrs,"r" );if (!fp) fp =fopen (misc_pcrs,"r" ); -if (!fp) +if (!fp) { +log_errno_reset (LOG_DEBUG ,"Failed to read TPM 1.2 PCRs" );return -1 ; + } result =read_one_bank (&tpm_banks[0 ], fp);fclose (fp);
@@ -2055,7 +2060,6 @@ static int ima_measurement(const char *file)int err_padded =-1 ;int err =-1 ; - errno =0 ;memset (zero,0 ,MAX_DIGEST_SIZE ); pseudo_padded_banks =init_tpm_banks (&num_banks);
@@ -2072,6 +2076,8 @@ static int ima_measurement(const char *file)init_public_keys (imaevm_params.keyfile); else /* assume read pubkey from x509 cert */ init_public_keys("/etc/keys/x509_evm.der"); +if (errno) +log_errno_reset (LOG_DEBUG ,"Failed to initialize public keys" );/* * Reading the PCRs before walking the IMA measurement list
@@ -2746,6 +2752,8 @@ int main(int argc, char *argv[])unsigned long keyid;char *eptr; + errno =0 ;/* initialize global errno */ +#if !(OPENSSL_VERSION_NUMBER <0x10100000 ) OPENSSL_init_crypto(#ifndef DISABLE_OPENSSL_CONF
Signature · 1 line
2.31.1
Re: [PATCH ima-evm-utils v4 02/17] log and reset 'errno' after failure to open non-critical files
Quoted 5 lines · Mimi Zohar
Define a
log_errno_resetmacro to emit the errno string at or near the time of error, similar to the existinglog_errnomacro, but also reset errno to avoid dangling or duplicate errno messages on exit.The initial usage is for non-critical file open failures.
After looking just at the fopen() in evmctl.c at the end of this series there are some that are left over that show no error message (read_binary_bios_measurements) others that still use log_err() then. Should they not all be converted/extended and use log_errno_reset()?
Quoted 59 lines
Suggested-by Vitaly Chikunov <[email protected]>Signed-off-by Mimi Zohar <[email protected]>--- src/evmctl.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-)src/evmctl.c +10
-2@@ -166,6 +166,9 @@ struct tpm_bank_info {static char *pcrfile[MAX_PCRFILE ];static unsigned npcrfile; +#define log_errno_reset(level, fmt, args...) \ + {do_log(level, fmt " (errno: %s)\n", ##args, strerror(errno)); errno = 0; } +static int bin2file (const char *file,const char *ext,const unsigned char *data,int len) {FILE *fp;@@ -1911,8 +1914,10 @@ static int read_sysfs_pcrs(int num_banks, struct tpm_bank_info *tpm_banks) fp =fopen (pcrs,"r" );if (!fp) fp =fopen (misc_pcrs,"r" ); -if (!fp) +if (!fp) { +log_errno_reset (LOG_DEBUG ,"Failed to read TPM 1.2 PCRs" );return -1 ; + } result =read_one_bank (&tpm_banks[0 ], fp);fclose (fp);@@ -2055,7 +2060,6 @@ static int ima_measurement(const char *file)int err_padded =-1 ;int err =-1 ; - errno =0 ;memset (zero,0 ,MAX_DIGEST_SIZE ); pseudo_padded_banks =init_tpm_banks (&num_banks);@@ -2072,6 +2076,8 @@ static int ima_measurement(const char *file)init_public_keys (imaevm_params.keyfile); else /* assume read pubkey from x509 cert */ init_public_keys("/etc/keys/x509_evm.der"); +if (errno) +log_errno_reset (LOG_DEBUG ,"Failed to initialize public keys" );/* * Reading the PCRs before walking the IMA measurement list @@ -2746,6 +2752,8 @@ int main(int argc, char *argv[])unsigned long keyid;char *eptr; + errno =0 ;/* initialize global errno */ +#if !(OPENSSL_VERSION_NUMBER <0x10100000 ) OPENSSL_init_crypto(#ifndef DISABLE_OPENSSL_CONF
Mimi Zohar
maintainerRe: [PATCH ima-evm-utils v4 02/17] log and reset 'errno' after failure to open non-critical files
Quoted 6 lines · Stefan Berger
Quoted 4 lines · Mimi Zohar
Define a
log_errno_resetmacro to emit the errno string at or near the time of error, similar to the existinglog_errnomacro, but also reset errno to avoid dangling or duplicate errno messages on exit.
Quoted 7 lines
Quoted 1 line
The initial usage is for non-critical file open failures.
After looking just at the
fopen()inevmctl.cat the end of this series there are some that are left over that show no error message (read_binary_bios_measurements) others that still uselog_err()then. Should they not all be converted/extended and uselog_errno_reset()?
No, log_errno_reset() is meant for the specific case where the program continues to execute, but the errno message is delayed and emitted on program exit. In the case of read_binary_bios_measurements(), the caller emits an error message and immediately exits. There's no delay between the error and the errno message.
Calling log_err() to emit an error mesage and then exiting seems to be fine.
Signature · 3 lines
thanks, Mimi
Mimi Zohar
maintainerPATCH v4 3/17 Log and reset 'errno' on lsetxattr failure
In reply to Mimi ZoharWriting either security.ima hashes or security.evm hmacs from userspace will fail regardless of the IMA or EVM fix mode. In fix mode, 'touch' will force security.ima and security.evm to be updated.
Make the setxattr error messages more explicit and clear errno.
--- src/evmctl.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-)
src/evmctl.c +8 -5
@@ -572,7 +572,7 @@ static int sign_evm(const char *file, const char *key)if (xattr) { err =lsetxattr (file, xattr_evm, sig, len,0 );if (err <0 ) { -log_err ("setxattr failed: %s\n" , file); +log_errno_reset (LOG_ERR ,"Set EVM xattr failed: %s" , file);return err; } }
@@ -615,7 +615,8 @@ static int hash_ima(const char *file)if (xattr) { err =lsetxattr (file, xattr_ima, hash, len,0 );if (err <0 ) { -log_err ("setxattr failed: %s\n" , file); +log_errno_reset (LOG_ERR ,"Set IMA hash xattr failed: %s" , + file);return err; } }
@@ -652,7 +653,8 @@ static int sign_ima(const char *file, const char *key)if (xattr) { err =lsetxattr (file, xattr_ima, sig, len,0 );if (err <0 ) { -log_err ("setxattr failed: %s\n" , file); +log_errno_reset (LOG_ERR ,"Set IMA sig xattr failed: %s" , + file);return err; } }
@@ -1125,7 +1127,7 @@ static int setxattr_ima(const char *file, char *sig_file) err =lsetxattr (file, xattr_ima, sig, len,0 );if (err <0 ) -log_err ("setxattr failed: %s\n" , file); +log_errno_reset (LOG_ERR ,"Set IMA sig xattr failed: %s" , file);free (sig);return err; }
@@ -1323,7 +1325,8 @@ static int hmac_evm(const char *file, const char *key) sig[0 ] =EVM_XATTR_HMAC ; err =lsetxattr (file, xattr_evm, sig, len +1 ,0 );if (err <0 ) { -log_err ("setxattr failed: %s\n" , file); +log_errno_reset (LOG_ERR ,"Set EVM hmac xattr failed: %s" , + file);return err; } }
Signature · 1 line
2.31.1
Re: [PATCH ima-evm-utils v4 03/17] Log and reset 'errno' on lsetxattr failure
Quoted 16 lines · Mimi Zohar
Writing either security.ima hashes or security.evm hmacs from userspace will fail regardless of the IMA or EVM fix mode. In fix mode, 'touch' will force security.ima and security.evm to be updated.
Make the setxattr error messages more explicit and clear errno.
Signed-off-by Mimi Zohar <[email protected]>--- src/evmctl.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-)src/evmctl.c +0
-0
src/evmctl.c static int sign_evm(const char *file, const char *key) · line 575
Quoted 5 lines
src/evmctl.c +1
-1@@ -572,7 +572,7 @@ static int sign_evm(const char *file, const char *key)if (xattr) { err =lsetxattr (file, xattr_evm, sig, len,0 );if (err <0 ) { -log_err ("setxattr failed: %s\n" , file); +log_errno_reset (LOG_ERR ,"Set EVM xattr failed: %s" , file);
Change 'Set' to 'Setting' (in other cases as well)?
Quoted 33 lines
src/evmctl.c +5
-3return err; } }@@ -615,7 +615,8 @@ static int hash_ima(const char *file)if (xattr) { err =lsetxattr (file, xattr_ima, hash, len,0 );if (err <0 ) { -log_err ("setxattr failed: %s\n" , file); +log_errno_reset (LOG_ERR ,"Set IMA hash xattr failed: %s" , + file);return err; } }@@ -652,7 +653,8 @@ static int sign_ima(const char *file, const char *key)if (xattr) { err =lsetxattr (file, xattr_ima, sig, len,0 );if (err <0 ) { -log_err ("setxattr failed: %s\n" , file); +log_errno_reset (LOG_ERR ,"Set IMA sig xattr failed: %s" , + file);return err; } }@@ -1125,7 +1127,7 @@ static int setxattr_ima(const char *file, char *sig_file) err =lsetxattr (file, xattr_ima, sig, len,0 );if (err <0 ) -log_err ("setxattr failed: %s\n" , file); +log_errno_reset (LOG_ERR ,"Set IMA sig xattr failed: %s" , file);free (sig);return err; }
src/evmctl.c static int hmac_evm(const char *file, const char *key) · line 1332
Quoted 9 lines
src/evmctl.c +2
-1@@ -1323,7 +1325,8 @@ static int hmac_evm(const char *file, const char *key) sig[0 ] =EVM_XATTR_HMAC ; err =lsetxattr (file, xattr_evm, sig, len +1 ,0 );if (err <0 ) { -log_err ("setxattr failed: %s\n" , file); +log_errno_reset (LOG_ERR ,"Set EVM hmac xattr failed: %s" , + file);return err; } }
Mimi Zohar
maintainerPATCH v4 4/17 travis: update dist=focal
In reply to Mimi ZoharAlthough Github Actions is available on Github Enterprise Server 3.x single server edition, as well as the unpaid version, it is not available in Github Enterprise Server 3.x cluster edition[1].
Continue updating travis.yml.
[1] https://docs.github.com/en/[email protected]/admin/release-notes#github-packages
--- .travis.yml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
.travis.yml +1 -1
@@ -1,6 +1,6 @@ # Copyright (c) 2017-2021 Petr Vorel <[email protected]> -dist: bionic +dist: focal language: C services: - docker
Signature · 1 line
2.31.1
Mimi Zohar
maintainerPATCH v4 5/17 Update configure.ac to address a couple of obsolete warnings
In reply to Mimi ZoharRemove AC_PROG_LIBTOOL and AC_HEAD_STDC. Replace AC_HELP_STRING with AS_HELP_STRING.
--- acinclude.m4 | 2 +- configure.ac | 4 ---- m4/manpage-docbook-xsl.m4 | 2 +- 3 files changed, 2 insertions(+), 6 deletions(-)
acinclude.m4 +1 -1
@@ -2,7 +2,7 @@ AC_DEFUN([PKG_ARG_ENABLE], [ AC_MSG_CHECKING(whether to enable $1) - AC_ARG_ENABLE([$1], AC_HELP_STRING([--enable-$1], [enable $1 (default is $2)]), + AC_ARG_ENABLE([$1], AS_HELP_STRING([--enable-$1], [enable $1 (default is $2)]), [pkg_cv_enable_$1=$enableval], [AC_CACHE_VAL([pkg_cv_enable_$1], [pkg_cv_enable_$1=$2])]) if test $pkg_cv_enable_$1 = yes; then
configure.ac +0 -4
@@ -15,16 +15,12 @@ AM_PROG_CC_C_O #AC_PROG_CXX #AC_PROG_CPP AC_PROG_INSTALL -AC_PROG_LIBTOOL #AC_PROG_LN_S LT_INIT # FIXME: Replace `main' with a function in `-lpthread': #AC_CHECK_LIB([pthread], [main]) -# Checks for header files. -AC_HEADER_STDC - PKG_CHECK_MODULES(LIBCRYPTO, [libcrypto >= 0.9.8 ]) AC_SUBST(KERNEL_HEADERS) AC_CHECK_HEADER(unistd.h)
m4/manpage-docbook-xsl.m4 +1 -1
@@ -7,7 +7,7 @@ AC_DEFUN([EVMCTL_MANPAGE_DOCBOOK_XSL], [ AC_PATH_PROGS(XMLCATALOG, xmlcatalog) AC_ARG_WITH([xml-catalog], - AC_HELP_STRING([--with-xml-catalog=CATALOG], + AS_HELP_STRING([--with-xml-catalog=CATALOG], [path to xml catalog to use]),, [with_xml_catalog=/etc/xml/catalog]) XML_CATALOG_FILE="$with_xml_catalog"
Signature · 1 line
2.31.1
Mimi Zohar
maintainerPATCH v4 6/17 Deprecate IMA signature version 1
In reply to Mimi ZoharThe original IMA file signatures were based on a SHA1 hash. Kernel support for other hash algorithms was subsequently upstreamed. Deprecate "--rsa" support.
Define "--enable-sigv1" option to configure signature v1 support.
--- configure.ac | 6 ++++++ src/Makefile.am | 10 ++++++++++ src/evmctl.c | 20 ++++++++++++++++---- src/libimaevm.c | 22 +++++++++++++++++++--- tests/sign_verify.test | 21 +++++++++++++++------ 5 files changed, 66 insertions(+), 13 deletions(-)
configure.ac +6 -0
@@ -49,6 +49,11 @@ AC_ARG_ENABLE([openssl_conf], AC_DEFINE(DISABLE_OPENSSL_CONF, 1, [Define to disable loading of openssl config by evmctl.]) fi], [enable_openssl_conf=yes]) +AC_ARG_ENABLE(sigv1, + AS_HELP_STRING([--enable-sigv1], [Build ima-evm-utils with signature v1 support])) + AM_CONDITIONAL([CONFIG_SIGV1], [test "x$enable_sigv1" = "xyes"]) + AS_IF([test "$enable_sigv1" != "yes"], [enable_sigv1="no"]) + #debug support - yes for a while PKG_ARG_ENABLE(debug, "yes", DEBUG, [Enable Debug support]) if test $pkg_cv_enable_debug = yes; then
@@ -83,5 +88,6 @@ echo " openssl-conf: $enable_openssl_conf" echo " tss2-esys: $ac_cv_lib_tss2_esys_Esys_Free" echo " tss2-rc-decode: $ac_cv_lib_tss2_rc_Tss2_RC_Decode" echo " ibmtss: $ac_cv_header_ibmtss_tss_h" +echo " sigv1: $enable_sigv1" echo " doc: $have_doc" echo
src/Makefile.am +10 -0
@@ -7,6 +7,10 @@ libimaevm_la_CPPFLAGS = $(AM_CPPFLAGS) $(LIBCRYPTO_CFLAGS) libimaevm_la_LDFLAGS = -version-info 3:0:0 libimaevm_la_LIBADD = $(LIBCRYPTO_LIBS) +if CONFIG_SIGV1 +libimaevm_la_CFLAGS = -DCONFIG_SIGV1 +endif + include_HEADERS = imaevm.h nodist_libimaevm_la_SOURCES = hash_info.h
@@ -22,6 +26,12 @@ evmctl_CPPFLAGS = $(AM_CPPFLAGS) $(LIBCRYPTO_CFLAGS) evmctl_LDFLAGS = $(LDFLAGS_READLINE) evmctl_LDADD = $(LIBCRYPTO_LIBS) -lkeyutils libimaevm.la +# Enable IMA signature version 1 +if CONFIG_SIGV1 +evmctl_CFLAGS = -DCONFIG_SIGV1 +endif + + # USE_PCRTSS uses the Intel TSS if USE_PCRTSS evmctl_SOURCES += pcr_tss.c
src/evmctl.c +16 -4
@@ -987,7 +987,6 @@ static int cmd_verify_ima(struct command *cmd)init_public_keys ("/etc/keys/x509_evm.der" ); } - errno =0 ;if (!file) {log_err ("Parameters missing\n" );print_usage (cmd);
@@ -1004,6 +1003,7 @@ static int cmd_verify_ima(struct command *cmd)return fails >0 ; } +#if CONFIG_SIGV1 static int cmd_convert (struct command *cmd) {char *inkey;
@@ -1034,6 +1034,7 @@ static int cmd_convert(struct command *cmd)RSA_free (key); return err; } +#endif static int cmd_import (struct command *cmd) {
@@ -1088,6 +1089,7 @@ static int cmd_import(struct command *cmd)calc_keyid_v2 ((uint32_t *)keyid, name, pkey);EVP_PKEY_free (pkey); }else { +#if CONFIG_SIGV1 RSA *key =read_pub_key (inkey, imaevm_params.x509);if (!key)
@@ -1095,6 +1097,10 @@ static int cmd_import(struct command *cmd) len =key2bin (key, pub);calc_keyid_v1 (keyid, name, pub, len);RSA_free (key); +#else +log_info ("Importing public RSA key is not supported\n" ); +return 1 ; +#endif }log_info ("Importing public key %s from file %s into keyring %d\n" , name, inkey, id);
@@ -2595,7 +2601,9 @@ static void usage(void) " -d, --imahash make IMA hash\n" " -f, --sigfile store IMA signature in .sig file instead of xattr\n" " --xattr-user store xattrs in user namespace (for testing purposes)\n" -" --rsa use RSA key type and signing scheme v1\n" +#if CONFIG_SIGV1 + " --rsa use RSA key type and signing scheme v1 (deprecated)\n" +#endif" -k, --key path to signing key (default: /etc/keys/{privkey,pubkey}_evm.pem)\n" " or a pkcs11 URI\n" " --keyid n overwrite signature keyid with a 32-bit value in hex (for signing)\n"
@@ -2634,8 +2642,12 @@ static void usage(void)struct command cmds[] = { {"--version" ,NULL ,0 ,"" }, {"help" , cmd_help,0 ,"<command>" }, - {"import" , cmd_import,0 ,"[--rsa] pubkey keyring" ,"Import public key into the keyring.\n" }, - {"convert" , cmd_convert,0 ,"key" ,"convert public key into the keyring.\n" }, +#if CONFIG_SIGV1 + {"import" , cmd_import,0 ,"[--rsa] pubkey keyring" ,"Import public key into the keyring. ([--rsa] deprecated)\n" }, + {"convert" , cmd_convert,0 ,"key" ,"convert public key into the keyring. (deprecated)\n" }, +#else + {"import" , cmd_import,0 ,"pubkey keyring" ,"Import public key into the keyring.\n" }, +#endif {"sign" , cmd_sign_evm,0 ,"[-r] [--imahash | --imasig ] [--key key] [--pass [password] file" ,"Sign file metadata.\n" }, {"verify" , cmd_verify_evm,0 ,"file" ,"Verify EVM signature (for debugging).\n" }, {"ima_sign" , cmd_sign_ima,0 ,"[--sigfile] [--key key] [--pass [password] file" ,"Make file content signature.\n" },
src/libimaevm.c +19 -3
@@ -290,6 +290,7 @@ out:return pkey; } +#if CONFIG_SIGV1 RSA *read_pub_key (const char *keyfile,int x509) {EVP_PKEY *pkey;
@@ -349,6 +350,7 @@ static int verify_hash_v1(const char *file, const unsigned char *hash, int size,return 0 ; } +#endif /* CONFIG_SIGV1 */ struct public_key_entry {struct public_key_entry *next;
@@ -684,6 +686,7 @@ int verify_hash(const char *file, const unsigned char *hash, int size, {/* Get signature type from sig header */ if (sig[1 ] ==DIGSIG_VERSION_1 ) { +#if CONFIG_SIGV1 const char *key =NULL ;/* Read pubkey from RSA key */
@@ -693,6 +696,10 @@ int verify_hash(const char *file, const unsigned char *hash, int size, key = imaevm_params.keyfile;return verify_hash_v1 (file, hash, size, sig +1 , siglen -1 , key); +#else +log_info ("Signature version 1 deprecated." ); +return -1 ; +#endif }else if (sig[1 ] ==DIGSIG_VERSION_2 ) {return verify_hash_v2 (file, hash, size, sig, siglen); }else if (sig[1 ] ==DIGSIG_VERSION_3 ) {
@@ -740,6 +747,7 @@ int ima_verify_signature(const char *file, unsigned char *sig, int siglen,return verify_hash (file, hash, hashlen, sig, siglen); } +#if CONFIG_SIGV1 /* * Create binary key representation suitable for kernel */
@@ -798,6 +806,7 @@ void calc_keyid_v1(uint8_t *keyid, char *str, const unsigned char *pkey, int lenif (imaevm_params.verbose >LOG_INFO ) log_info("keyid-v1: %s\n", str); } +#endif /* CONFIG_SIGV1 */ /* * Calculate keyid of the public_key part of EVP_PKEY
@@ -986,6 +995,7 @@ err_engine:return NULL ; } +#if CONFIG_SIGV1 static RSA *read_priv_key (const char *keyfile,const char *keypass) {EVP_PKEY *pkey;
@@ -1096,6 +1106,7 @@ out:RSA_free (key); return len; } +#endif /* CONFIG_SIGV1 */ /* * @sig is assumed to be of (MAX_SIGNATURE_SIZE - 1) size
@@ -1210,9 +1221,14 @@ int sign_hash(const char *hashalgo, const unsigned char *hash, int size, const cif (keypass) imaevm_params.keypass = keypass; -return imaevm_params.x509 ? -sign_hash_v2 (hashalgo, hash, size, keyfile, sig) : -sign_hash_v1 (hashalgo, hash, size, keyfile, sig); +if (imaevm_params.x509) +return sign_hash_v2 (hashalgo, hash, size, keyfile, sig); +#if CONFIG_SIGV1 + else + return sign_hash_v1(hashalgo, hash, size, keyfile, sig); +#endif +log_info ("Signature version 1 deprecated." ); +return -1 ; }static void libinit ()
tests/sign_verify.test +15 -6
@@ -17,6 +17,10 @@ cd "$(dirname "$0")" || exit 1 PATH=../src:$PATH + +# set the env SIGV1=1 to execute the signature v1 tests +SIGV1=${SIGV1:-0} + source ./functions.sh _require cmp evmctl getfattr openssl xxd
@@ -368,13 +372,18 @@ try_different_sigs() { ## Test v1 signatures # Signature v1 only supports sha1 and sha256 so any other should fail -expect_fail \ - check_sign TYPE=ima KEY=rsa1024 ALG=md5 PREFIX=0x0301 OPTS=--rsa +if [ $SIGV1 -eq 0 ]; then + __skip() { echo "IMA signature v1 tests are skipped: not supported"; return $SKIP; } + expect_pass __skip +else + expect_fail \ + check_sign TYPE=ima KEY=rsa1024 ALG=md5 PREFIX=0x0301 OPTS=--rsa -sign_verify rsa1024 sha1 0x0301 --rsa -sign_verify rsa1024 sha256 0x0301 --rsa - try_different_keys - try_different_sigs + sign_verify rsa1024 sha1 0x0301 --rsa + sign_verify rsa1024 sha256 0x0301 --rsa + try_different_keys + try_different_sigs +fi ## Test v2 signatures with RSA PKCS#1 # List of allowed hashes much greater but not all are supported.
Signature · 1 line
2.31.1
Mimi Zohar
maintainerPATCH v4 7/17 Replace the low level SHA1 calls when calculating the TPM 1.2 PCRs
In reply to Mimi ZoharOpenSSL v3 emits deprecated warnings for SHA1 functions. Use the EVP_ functions when walking the TPM 1.2 binary bios measurements to calculate the TPM 1.2 PCRs.
--- src/evmctl.c | 78 ++++++++++++++++++++++++++++++++++++++++++---------- 1 file changed, 63 insertions(+), 15 deletions(-)
src/evmctl.c +63 -15
@@ -2293,6 +2293,11 @@ static int cmd_ima_measurement(struct command *cmd)return ima_measurement (file); } +/* +* read_binary_bios_measurements - read the TPM 1.2 event log +* +* Returns 0 on success, 1 on failure. +*/ #define MAX_EVENT_DATA_SIZE 200000static int read_binary_bios_measurements (char *file,struct tpm_bank_info *bank) {
@@ -2305,17 +2310,22 @@ static int read_binary_bios_measurements(char *file, struct tpm_bank_info *bank) } header;unsigned char data[MAX_EVENT_DATA_SIZE ]; } event; +EVP_MD_CTX *mdctx; +const EVP_MD *md; +unsigned int mdlen; +int evp_err =1 ;/* success */ struct stat s;FILE *fp; -SHA_CTX c;int err =0 ;int len;int i; +#if OPENSSL_VERSION_NUMBER <0x10100000 +EVP_MD_CTX ctx; + mdctx = &ctx; +#endif -if (stat (file, &s) ==-1 ) { - errno =0 ; +if (stat (file, &s) ==-1 )return 1 ; - }if (!S_ISREG (s.st_mode)) {log_info ("Bios event log: not a regular file or link to regular file\n" );
@@ -2323,13 +2333,27 @@ static int read_binary_bios_measurements(char *file, struct tpm_bank_info *bank) } fp =fopen (file,"r" ); -if (!fp) { -log_errno ("Failed to open TPM 1.2 event log.\n" ); +if (!fp)return 1 ; - }if (imaevm_params.verbose >LOG_INFO ) -log_info ("Reading the TPM 1.2 event log %s.\n" , file); +log_info ("Reading the TPM 1.2 event log (%s)\n" , file); + + md =EVP_get_digestbyname (bank->algo_name); +if (!md) { +log_err ("Unknown message digest %s\n" , bank->algo_name); +fclose (fp); +return 1 ; + } + +#if OPENSSL_VERSION_NUMBER >=0x10100000 + mdctx =EVP_MD_CTX_new (); +if (!mdctx) { +log_err ("EVP_MD_CTX_new failed\n" ); +fclose (fp); +return 1 ; + } +#endif /* Extend the pseudo TPM PCRs with the event digest */ while (fread (&event,sizeof (event.header),1 , fp) ==1 ) {
@@ -2339,13 +2363,30 @@ static int read_binary_bios_measurements(char *file, struct tpm_bank_info *bank) }if (event.header.pcr >=NUM_PCRS ) {log_err ("Invalid PCR %d.\n" , event.header.pcr); - err =1 ;break ; } -SHA1_Init (&c); -SHA1_Update (&c, bank->pcr[event.header.pcr],20 ); -SHA1_Update (&c, event.header.digest,20 ); -SHA1_Final (bank->pcr[event.header.pcr], &c); + + evp_err =EVP_DigestInit (mdctx, md); +if (evp_err ==0 ) { +log_err ("EVP_DigestInit() failed\n" ); +break ; + } + + evp_err =EVP_DigestUpdate (mdctx, bank->pcr[event.header.pcr],20 ); +if (evp_err ==0 ) { +log_err ("EVP_DigestUpdate() failed\n" ); +break ; + } + evp_err =EVP_DigestUpdate (mdctx, event.header.digest,20 ); +if (evp_err ==0 ) { +log_err ("EVP_DigestUpdate() failed\n" ); +break ; + } + evp_err =EVP_DigestFinal (mdctx, bank->pcr[event.header.pcr], &mdlen); +if (evp_err ==0 ) { +log_err ("EVP_DigestFinal() failed\n" ); +break ; + }if (event.header.len >MAX_EVENT_DATA_SIZE ) {log_err ("Event data event too long.\n" ); err =1 ;
@@ -2354,10 +2395,17 @@ static int read_binary_bios_measurements(char *file, struct tpm_bank_info *bank) len =fread (event.data, event.header.len,1 , fp);if (len !=1 ) {log_errno ("Failed reading event data (short read)\n" ); + err =1 ;break ; } } + +if (evp_err ==0 )/* EVP_ functions return 1 on success, 0 on failure */ + err =1 ;fclose (fp); +#if OPENSSL_VERSION_NUMBER >=0x10100000 +EVP_MD_CTX_free (mdctx); +#endif if (imaevm_params.verbose <=LOG_INFO )return err;
@@ -2481,8 +2529,8 @@ static int cmd_ima_bootaggr(struct command *cmd) err =read_binary_bios_measurements (file, tpm_banks);if (err) { -log_info ("Failed reading the TPM 1.2 event log %s.\n" , - file); +log_err ("Failed reading the TPM 1.2 event log (%s)\n" , + file);return -1 ; } }else {
Signature · 1 line
2.31.1
Mimi Zohar
maintainerPATCH v4 8/17 Replace the low level HMAC calls when calculating the EVM HMAC
In reply to Mimi ZoharCalculating the EVM HMAC and labeling the filesystem was originally included in ima-evm-utils for debugging purposes only. For now, instead of removing EVM HMAC support just replace the low level HMAC_ calls with EVP_ calls.
The '-a, --hashalgo' specifies the IMA hash or signature algorithm. The kernel EVM HMAC is limited to SHA1. Fix ima-evm-utils by hard coding the EVM HMAC algorithm to SHA1.
--- src/evmctl.c | 57 +++++++++++++++++++++++++++++----------------------- 1 file changed, 32 insertions(+), 25 deletions(-)
src/evmctl.c +32 -25
@@ -61,6 +61,7 @@#include <openssl/asn1.h> #include <openssl/sha.h> #include <openssl/pem.h> +#include <openssl/evp.h> #include <openssl/hmac.h> #include <openssl/err.h> #include <openssl/rsa.h>
@@ -1159,12 +1160,12 @@ static int cmd_setxattr_ima(struct command *cmd)static int calc_evm_hmac (const char *file,const char *keyfile,unsigned char *hash) { -const EVP_MD *md; +size_t mdlen; +EVP_MD_CTX *pctx; +EVP_PKEY *pkey =NULL ;struct stat st;int err =-1 ;uint32_t generation =0 ; -HMAC_CTX *pctx; -unsigned int mdlen;char **xattrname;unsigned char xattr_value[1024 ];unsigned char *key;
@@ -1175,10 +1176,8 @@ static int calc_evm_hmac(const char *file, const char *keyfile, unsigned char *hstruct h_misc_64 hmac_misc;int hmac_size;#if OPENSSL_VERSION_NUMBER <0x10100000 -HMAC_CTX ctx; +EVP_MD_CTX ctx; pctx = &ctx; -#else - pctx =HMAC_CTX_new ();#endif key =file2bin (keyfile,NULL , &keylen);
@@ -1225,19 +1224,26 @@ static int calc_evm_hmac(const char *file, const char *keyfile, unsigned char *h goto out; } - md =EVP_get_digestbyname (imaevm_params.hash_algo); -if (!md) { -log_err ("EVP_get_digestbyname(%s) failed\n" , - imaevm_params.hash_algo); +#if OPENSSL_VERSION_NUMBER >=0x10100000 + pctx =EVP_MD_CTX_new (); +if (!pctx) { +log_err ("EVP_MD_CTX_new failed\n" ); goto out; } +#endif - err = !HMAC_Init_ex (pctx, evmkey,sizeof (evmkey), md,NULL ); -if (err) { + pkey =EVP_PKEY_new_mac_key (EVP_PKEY_HMAC ,NULL , evmkey,sizeof (evmkey)); +if (!pkey) {log_err ("HMAC_Init() failed\n" ); goto out; } + err =EVP_DigestSignInit (pctx,NULL ,EVP_sha1 (),NULL , pkey); +if (err !=1 ) { +log_err ("EVP_DigestSignInit() failed\n" ); + goto out; + } +for (xattrname = evm_config_xattrnames; *xattrname !=NULL ; xattrname++) { err =lgetxattr (file, *xattrname, xattr_value,sizeof (xattr_value));if (err <0 ) {
@@ -1248,12 +1254,12 @@ static int calc_evm_hmac(const char *file, const char *keyfile, unsigned char *hlog_info ("skipping xattr: %s\n" , *xattrname);continue ; } -/*log_debug("name: %s, value: %s, size: %d\n", *xattrname, xattr_value, err);*/ log_info ("name: %s, size: %d\n" , *xattrname, err);log_debug_dump (xattr_value, err); - err = !HMAC_Update (pctx, xattr_value, err); -if (err) { -log_err ("HMAC_Update() failed\n" ); + + err =EVP_DigestSignUpdate (pctx, xattr_value, err); +if (err !=1 ) { +log_err ("EVP_DigestSignUpdate() failed\n" ); goto out_ctx_cleanup; } }
@@ -1292,23 +1298,24 @@ static int calc_evm_hmac(const char *file, const char *keyfile, unsigned char *hlog_debug ("hmac_misc (%d): " , hmac_size);log_debug_dump (&hmac_misc, hmac_size); - err = !HMAC_Update (pctx, (const unsigned char *)&hmac_misc, hmac_size); -if (err) { + err =EVP_DigestSignUpdate (pctx, &hmac_misc, hmac_size); +if (err !=1 ) {log_err ("HMAC_Update() failed\n" ); goto out_ctx_cleanup; } - err = !HMAC_Final (pctx, hash, &mdlen); -if (err) + err =EVP_DigestSignFinal (pctx, hash, &mdlen); +if (err !=1 )log_err ("HMAC_Final() failed\n" ); out_ctx_cleanup: -#if OPENSSL_VERSION_NUMBER <0x10100000 -HMAC_CTX_cleanup (pctx); -#else -HMAC_CTX_free (pctx); +EVP_PKEY_free (pkey); +#if OPENSSL_VERSION_NUMBER >=0x10100000 +EVP_MD_CTX_free (pctx);#endif out:free (key); -return err ?: mdlen; +if (err ==1 ) +return mdlen; +return err; }static int hmac_evm (const char *file,const char *key)
Signature · 1 line
2.31.1
Mimi Zohar
maintainerPATCH v4 9/17 Add missing EVP_MD_CTX_free() call in calc_evm_hash()
In reply to Mimi ZoharWhen EVP_MD_CTX_new() call was added, the corresponding EVP_MD_CTX_free() was never called. Properly free it.
--- src/evmctl.c | 58 +++++++++++++++++++++++++++++++++++----------------- 1 file changed, 39 insertions(+), 19 deletions(-)
src/evmctl.c +39 -19
@@ -331,11 +331,17 @@ err:return -1 ; } +/* +* calc_evm_hash - calculate the file metadata hash +* +* Returns 0 for EVP_ function failures. Return -1 for other failures. +* Return hash algorithm size on success. +*/ static int calc_evm_hash (const char *file,unsigned char *hash) {const EVP_MD *md;struct stat st; -int err; +int err =-1 ;uint32_t generation =0 ;EVP_MD_CTX *pctx;unsigned int mdlen;
@@ -349,12 +355,10 @@ static int calc_evm_hash(const char *file, unsigned char *hash)#if OPENSSL_VERSION_NUMBER <0x10100000 EVP_MD_CTX ctx; pctx = &ctx; -#else - pctx =EVP_MD_CTX_new ();#endif if (lstat (file, &st)) { -log_err ("Failed to stat: %s\n" , file); +log_errno_reset (LOG_ERR ,"Failed to stat: %s" , file);return -1 ; }
@@ -389,21 +393,30 @@ static int calc_evm_hash(const char *file, unsigned char *hash) list_size =llistxattr (file, list,sizeof (list));if (list_size <0 ) { -log_err ("llistxattr() failed\n" ); +log_errno_reset (LOG_ERR ,"llistxattr() failed" );return -1 ; } +#if OPENSSL_VERSION_NUMBER >=0x10100000 + pctx =EVP_MD_CTX_new (); +if (!pctx) { +log_err ("EVP_MD_CTX_new() failed\n" ); +return 0 ; + } +#endif + md =EVP_get_digestbyname (imaevm_params.hash_algo);if (!md) {log_err ("EVP_get_digestbyname(%s) failed\n" , imaevm_params.hash_algo); -return 1 ; + err =0 ; + goto out; } err =EVP_DigestInit (pctx, md);if (!err) {log_err ("EVP_DigestInit() failed\n" ); -return 1 ; + goto out; }for (xattrname = evm_config_xattrnames; *xattrname !=NULL ; xattrname++) {
@@ -414,7 +427,8 @@ static int calc_evm_hash(const char *file, unsigned char *hash)if (err >sizeof (xattr_value)) {log_err ("selinux[%u] value is too long to fit into xattr[%zu]\n" , err,sizeof (xattr_value)); -return -1 ; + err =-1 ; + goto out; }strcpy (xattr_value, selinux_str); }else if (!strcmp (*xattrname,XATTR_NAME_IMA ) && ima_str) {
@@ -422,7 +436,8 @@ static int calc_evm_hash(const char *file, unsigned char *hash)if (err >sizeof (xattr_value)) {log_err ("ima[%u] value is too long to fit into xattr[%zu]\n" , err,sizeof (xattr_value)); -return -1 ; + err =-1 ; + goto out; }hex2bin (xattr_value, ima_str, err); }else if (!strcmp (*xattrname,XATTR_NAME_IMA ) && evm_portable){
@@ -431,7 +446,7 @@ static int calc_evm_hash(const char *file, unsigned char *hash)if (err <0 ) {log_err ("EVM portable sig: %s required\n" , xattr_ima); -return -1 ; + goto out; } use_xattr_ima =1 ; }else if (!strcmp (*xattrname,XATTR_NAME_CAPS ) && (hmac_flags &HMAC_FLAG_CAPS_SET )) {
@@ -441,7 +456,8 @@ static int calc_evm_hash(const char *file, unsigned char *hash)if (err >=sizeof (xattr_value)) {log_err ("caps[%u] value is too long to fit into xattr[%zu]\n" , err +1 ,sizeof (xattr_value)); -return -1 ; + err =-1 ; + goto out; }strcpy (xattr_value, caps_str); }else {
@@ -462,7 +478,7 @@ static int calc_evm_hash(const char *file, unsigned char *hash) err =EVP_DigestUpdate (pctx, xattr_value, err);if (!err) {log_err ("EVP_DigestUpdate() failed\n" ); -return 1 ; + goto out; } }
@@ -516,29 +532,33 @@ static int calc_evm_hash(const char *file, unsigned char *hash) err =EVP_DigestUpdate (pctx, &hmac_misc, hmac_size);if (!err) {log_err ("EVP_DigestUpdate() failed\n" ); -return 1 ; + goto out; }if (!evm_immutable && !evm_portable && !(hmac_flags &HMAC_FLAG_NO_UUID )) { err =get_uuid (&st, uuid);if (err) -return -1 ; + goto out; err =EVP_DigestUpdate (pctx, (const unsigned char *)uuid,sizeof (uuid));if (!err) {log_err ("EVP_DigestUpdate() failed\n" ); -return 1 ; + goto out; } } err =EVP_DigestFinal (pctx, hash, &mdlen); -if (!err) { +if (!err)log_err ("EVP_DigestFinal() failed\n" ); -return 1 ; - } -return mdlen; +out: +#if OPENSSL_VERSION_NUMBER >=0x10100000 +EVP_MD_CTX_free (pctx); +#endif +if (err ==1 ) +return mdlen; +return err; }static int sign_evm (const char *file,const char *key)
Signature · 1 line
2.31.1
Mimi Zohar
maintainerPATCH v4 10/17 Disable use of OpenSSL "engine" support
In reply to Mimi ZoharOpenSSL v3 "engine" support is deprecated and replaced with "providers". Engine support will continue to work for a while, but results in deprecated declaration and other messages. One option is simply to hide them ("-Wno-deprecated-declarations"). The other alternative is to conditionally build ima-evm-utils without OpenSSL engine support and without disabling deprecated declarations.
Based on "--disable-engine" or "--enable-engine=no" configuration option, disable OpenSSL "engine" support.
As suggested by Vitaly,
- verify ENGINE_init symbol is defined in libcrypto
- disable engine support if either OPENSSL_NO_DYNAMIC_ENGINE or OPENSSL_NO_ENGINE variables are defined
--- configure.ac | 6 ++++++ src/Makefile.am | 8 ++++++++ src/evmctl.c | 17 ++++++++++++++++- src/imaevm.h | 6 ++++++ src/libimaevm.c | 7 ++++++- 5 files changed, 42 insertions(+), 2 deletions(-)
configure.ac +6 -0
@@ -54,6 +54,11 @@ AC_ARG_ENABLE(sigv1, AM_CONDITIONAL([CONFIG_SIGV1], [test "x$enable_sigv1" = "xyes"]) AS_IF([test "$enable_sigv1" != "yes"], [enable_sigv1="no"]) +AC_ARG_ENABLE(engine, + [AS_HELP_STRING([--disable-engine], [build ima-evm-utils without OpenSSL engine support])],,[enable_engine=yes]) + AC_CHECK_LIB([crypto], [ENGINE_init],, [enable_engine=no]) + AM_CONDITIONAL([CONFIG_IMA_EVM_ENGINE], [test "x$enable_engine" = "xyes"]) + #debug support - yes for a while PKG_ARG_ENABLE(debug, "yes", DEBUG, [Enable Debug support]) if test $pkg_cv_enable_debug = yes; then
@@ -89,5 +94,6 @@ echo " tss2-esys: $ac_cv_lib_tss2_esys_Esys_Free" echo " tss2-rc-decode: $ac_cv_lib_tss2_rc_Tss2_RC_Decode" echo " ibmtss: $ac_cv_header_ibmtss_tss_h" echo " sigv1: $enable_sigv1" +echo " engine: $enable_engine" echo " doc: $have_doc" echo
src/Makefile.am +8 -0
@@ -11,6 +11,10 @@ if CONFIG_SIGV1 libimaevm_la_CFLAGS = -DCONFIG_SIGV1 endif +if CONFIG_IMA_EVM_ENGINE +libimaevm_la_CFLAGS = -DCONFIG_IMA_EVM_ENGINE +endif + include_HEADERS = imaevm.h nodist_libimaevm_la_SOURCES = hash_info.h
@@ -31,6 +35,10 @@ if CONFIG_SIGV1 evmctl_CFLAGS = -DCONFIG_SIGV1 endif +# Enable "--engine" support +if CONFIG_IMA_EVM_ENGINE +evmctl_CFLAGS = -DCONFIG_IMA_EVM_ENGINE +endif # USE_PCRTSS uses the Intel TSS if USE_PCRTSS
src/evmctl.c +16 -1
@@ -65,7 +65,9 @@#include <openssl/hmac.h> #include <openssl/err.h> #include <openssl/rsa.h> +#if CONFIG_IMA_EVM_ENGINE #include <openssl/engine.h> +#endif #include <openssl/x509v3.h> #include "hash_info.h" #include "pcr.h"
@@ -2704,7 +2706,9 @@ static void usage(void) " --selinux use custom Selinux label for EVM\n" " --caps use custom Capabilities for EVM(unspecified: from FS, empty: do not use)\n" " --verify-sig verify measurement list signatures\n" -" --engine e preload OpenSSL engine e (such as: gost)\n" +#if CONFIG_IMA_EVM_ENGINE + " --engine e preload OpenSSL engine e (such as: gost) is deprecated\n" +#endif" --ignore-violations ignore ToMToU measurement violations\n" " -v increase verbosity level\n" " -h, --help display this help and exit\n"
@@ -2766,7 +2770,9 @@ static struct option opts[] = { {"selinux", 1, 0, 136}, {"caps", 2, 0, 137}, {"verify-sig", 0, 0, 138}, +#if CONFIG_IMA_EVM_ENGINE {"engine", 1, 0, 139}, +#endif {"xattr-user", 0, 0, 140}, {"ignore-violations", 0, 0, 141}, {"pcrs", 1, 0, 142},
@@ -2819,9 +2825,11 @@ static char *get_password(void)return password; } +#if CONFIG_IMA_EVM_ENGINE static ENGINE *setup_engine (const char *engine_id) {ENGINE *eng =ENGINE_by_id (engine_id); +if (!eng) {log_err ("engine %s isn't available\n" , optarg);ERR_print_errors_fp (stderr);
@@ -2835,6 +2843,7 @@ static ENGINE *setup_engine(const char *engine_id)ENGINE_set_default (eng,ENGINE_METHOD_ALL ); return eng; } +#endif int main (int argc,char *argv[]) {
@@ -2960,11 +2969,13 @@ int main(int argc, char *argv[])case 138 : verify_list_sig =1 ;break ; +#if CONFIG_IMA_EVM_ENGINE case 139 :/* --engine e */ imaevm_params.eng =setup_engine (optarg);if (!imaevm_params.eng) goto error;break ; +#endif case 140 :/* --xattr-user */ xattr_ima ="user.ima" ; xattr_evm ="user.evm" ;
@@ -3023,7 +3034,9 @@ int main(int argc, char *argv[])if (imaevm_params.keyfile !=NULL && imaevm_params.eng ==NULL && !strncmp (imaevm_params.keyfile,"pkcs11:" ,7 )) { +#if CONFIG_IMA_EVM_ENGINE imaevm_params.eng =setup_engine ("pkcs11" ); +#endif if (!imaevm_params.eng) goto error; }
@@ -3049,6 +3062,7 @@ int main(int argc, char *argv[]) } error: +#if CONFIG_IMA_EVM_ENGINE if (imaevm_params.eng) {ENGINE_finish (imaevm_params.eng);ENGINE_free (imaevm_params.eng);
@@ -3056,6 +3070,7 @@ error:ENGINE_cleanup (); #endif } +#endif ERR_free_strings ();EVP_cleanup ();BIO_free (NULL );
src/imaevm.h +6 -0
@@ -48,7 +48,13 @@#include <errno.h> #include <sys/types.h> #include <openssl/rsa.h> +#ifdef CONFIG_IMA_EVM_ENGINE #include <openssl/engine.h> +#endif + +#if defined(OPENSSL_NO_ENGINE ) || defined(OPENSSL_NO_DYNAMIC_ENGINE ) +#undef CONFIG_IMA_EVM_ENGINE +#endif #ifdef USE_FPRINTF #define do_log(level, fmt, args...) \
src/libimaevm.c +6 -1
@@ -953,9 +953,10 @@ uint32_t imaevm_read_keyid(const char *certfile)static EVP_PKEY *read_priv_pkey (const char *keyfile,const char *keypass) {FILE *fp; -EVP_PKEY *pkey; +EVP_PKEY *pkey =NULL ;if (!strncmp (keyfile,"pkcs11:" ,7 )) { +#ifdef CONFIG_IMA_EVM_ENGINE if (!imaevm_params.keyid) {log_err ("When using a pkcs11 URI you must provide the keyid with an option\n" );return NULL ;
@@ -972,6 +973,10 @@ static EVP_PKEY *read_priv_pkey(const char *keyfile, const char *keypass)log_err ("Failed to load private key %s\n" , keyfile); goto err_engine; } +#else +log_err ("OpenSSL \"engine\" support is disabled\n" ); + goto err_engine; +#endif }else { fp =fopen (keyfile,"r" );if (!fp) {
Signature · 1 line
2.31.1
Mimi Zohar
maintainerPATCH v4 11/17 Fix potential use after free in read_tpm_banks()
In reply to Mimi ZoharOn failure to read TPM 2.0 bank PCRs 'errmsg' is not properly set to NULL after being freed. Fix potential use after free.
--- src/evmctl.c | 1 + 1 file changed, 1 insertion(+)
src/evmctl.c +1 -0
@@ -2070,6 +2070,7 @@ static int read_tpm_banks(int num_banks, struct tpm_bank_info *bank)log_debug ("Failed to read %s PCRs: (%s)\n" , bank[i].algo_name, errmsg);free (errmsg); + errmsg =NULL ; bank[i].supported =0 ; } }
Signature · 1 line
2.31.1
Mimi Zohar
maintainerPATCH v4 12/17 Limit the file hash algorithm name length
In reply to Mimi ZoharInstead of assuming the file hash algorithm is a properly NULL terminated string, properly limit the "algo:<hash>" field size.
--- src/evmctl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
src/evmctl.c +1 -1
@@ -1598,7 +1598,7 @@ void ima_ng_show(struct template_entry *entry) total_len -=sizeof (field_len); algo = (char *)fieldp; - len =strlen (algo) +1 ; + len =strnlen (algo, field_len -1 ) +1 ; digest_len = field_len - len; digest = fieldp + len;
Signature · 1 line
2.31.1
Mimi Zohar
maintainerPATCH v4 13/17 Missing template data size lower bounds checking
In reply to Mimi ZoharEach record in the IMA measurement list must contain some template data. Ensure the template data is not zero length.
--- src/evmctl.c | 4 ++++ 1 file changed, 4 insertions(+)
src/evmctl.c +4 -0
@@ -2183,6 +2183,10 @@ static int ima_measurement(const char *file)log_err ("Unable to read template length\n" ); goto out; } +if (entry.template_len ==0 ) { +log_err ("Invalid template data len\n" ); + goto out; + } }else { entry.template_len =SHA_DIGEST_LENGTH +TCG_EVENT_NAME_LEN_MAX +1 ;
Signature · 1 line
2.31.1
Mimi Zohar
maintainerPATCH v4 14/17 Base sm2/sm3 test on openssl version installed
In reply to Mimi ZoharSince the distros are now shipping with OpenSSL 3, no need to build it. Limit the sm2/sm3 test to OpenSSL 3.
--- tests/sign_verify.test | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
tests/sign_verify.test +2 -2
@@ -416,8 +416,8 @@ sign_verify prime256v1 sha384 0x030205:K:004[345678] sign_verify prime256v1 sha512 0x030206:K:004[345678] # If openssl 3.0 is installed, test the SM2/3 algorithm combination -if [ -x /opt/openssl3/bin/openssl ]; then - PATH=/opt/openssl3/bin:$PATH LD_LIBRARY_PATH=/opt/openssl3/lib \ +ssl_version=$(openssl version | sed -e 's/^OpenSSL //' | sed -e 's/ .*//') +if test "${ssl_version::1}" = "3"; then sign_verify sm2 sm3 0x030211:K:004[345678] fi
Signature · 1 line
2.31.1
Re: [PATCH ima-evm-utils v4 14/17] Base sm2/sm3 test on openssl version installed
Quoted 13 lines · Mimi Zohar
Since the distros are now shipping with OpenSSL 3, no need to build it. Limit the sm2/sm3 test to OpenSSL 3.
Signed-off-by Mimi Zohar <[email protected]>--- tests/sign_verify.test | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)tests/sign_verify.test +0
-0
tests/sign_verify.test sign_verify prime256v1 sha384 0x030205:K:004[345678] · line 419
Quoted 6 lines
tests/sign_verify.test +1
-2@@ -416,8 +416,8 @@ sign_verify prime256v1 sha384 0x030205:K:004[345678] sign_verify prime256v1 sha512 0x030206:K:004[345678] # If openssl 3.0 is installed, test the SM2/3 algorithm combination -if [ -x /opt/openssl3/bin/openssl ]; then - PATH=/opt/openssl3/bin:$PATH LD_LIBRARY_PATH=/opt/openssl3/lib \ +ssl_version=$(openssl version | sed -e 's/^OpenSSL //' | sed -e 's/ .*//')
This would give you the major number in one step by selecting all all characters after 'OpenSSL ' and before the first '.':
major=$(openssl version | sed -n 's/^OpenSSL \([^\.]\).*/\1/p')
tests/sign_verify.test sign_verify prime256v1 sha384 0x030205:K:004[345678] · line 423
Quoted 4 lines
tests/sign_verify.test +1
-0+if test "${ssl_version::1}" = "3"; then sign_verify sm2 sm3 0x030211:K:004[345678] fi
Mimi Zohar
maintainerPATCH v4 15/17 Compile a newer version of OpenSSL
In reply to Mimi ZoharWith the distros shipping OpenSSL 3 with engine support, the original purpose for compiling OpenSSL 3 to test sm2/sm3 is no longer necessary and could be removed. Or, it could be re-purposed for building OpenSSL without engine support, which is needed for testing.
For both travis and github actions, update openssl-3.0.0-beta1 with openssl-3.0.5.
--- .github/workflows/ci.yml | 6 +++--- .travis.yml | 6 +++--- 2 files changed, 6 insertions(+), 6 deletions(-)
.github/workflows/ci.yml +3 -3
@@ -17,7 +17,7 @@ jobs: ARCH: i386 TSS: tpm2-tss VARIANT: i386 - COMPILE_SSL: openssl-3.0.0-beta1 + COMPILE_SSL: openssl-3.0.5 # cross compilation builds - container: "debian:stable"
@@ -52,7 +52,7 @@ jobs: env: CC: clang TSS: ibmtss - COMPILE_SSL: openssl-3.0.0-beta1 + COMPILE_SSL: openssl-3.0.5 - container: "opensuse/leap" env:
@@ -63,7 +63,7 @@ jobs: env: CC: gcc TSS: ibmtss - COMPILE_SSL: openssl-3.0.0-beta1 + COMPILE_SSL: openssl-3.0.5 - container: "ubuntu:xenial" env:
.travis.yml +3 -3
@@ -9,7 +9,7 @@ matrix: include: # 32 bit build - os: linux - env: DISTRO=debian:stable VARIANT=i386 ARCH=i386 TSS=tpm2-tss COMPILE_SSL=openssl-3.0.0-beta1 + env: DISTRO=debian:stable VARIANT=i386 ARCH=i386 TSS=tpm2-tss COMPILE_SSL=openssl-3.0.5 compiler: gcc # cross compilation builds
@@ -32,7 +32,7 @@ matrix: # glibc (gcc/clang) - os: linux - env: DISTRO=opensuse/tumbleweed TSS=ibmtss CONTAINER=podman CONTAINER_ARGS="--runtime=/usr/bin/crun --network=host" COMPILE_SSL=openssl-3.0.0-beta1 + env: DISTRO=opensuse/tumbleweed TSS=ibmtss CONTAINER=podman CONTAINER_ARGS="--runtime=/usr/bin/crun --network=host" COMPILE_SSL=openssl-3.0.5 compiler: clang - os: linux
@@ -40,7 +40,7 @@ matrix: compiler: gcc - os: linux - env: DISTRO=ubuntu:jammy TSS=ibmtss COMPILE_SSL=openssl-3.0.0-beta1 + env: DISTRO=ubuntu:jammy TSS=ibmtss COMPILE_SSL=openssl-3.0.5 compiler: gcc - os: linux
Signature · 1 line
2.31.1
Mimi Zohar
maintainerPATCH v4 16/17 Build OpenSSL without engine support
In reply to Mimi ZoharFix COMPILE_SSL to build for the proper architecture, link with the appropriate library, and set up library path for evmctl.
Compile OpenSSL with "no-engine" and "no-dynamic-engine" support.
--- .github/workflows/ci.yml | 4 ++-- .travis.yml | 2 +- build.sh | 8 ++++++++ src/evmctl.c | 4 +++- tests/install-openssl3.sh | 9 ++++++++- 5 files changed, 22 insertions(+), 5 deletions(-)
.github/workflows/ci.yml +2 -2
@@ -114,7 +114,7 @@ jobs: INSTALL="${INSTALL%%/*}" if [ "$VARIANT" ]; then ARCH="$ARCH" ./ci/$INSTALL.$VARIANT.sh; fi ARCH="$ARCH" CC="$CC" TSS="$TSS" ./ci/$INSTALL.sh - if [ "$COMPILE_SSL" ]; then COMPILE_SSL="$COMPILE_SSL" ./tests/install-openssl3.sh; fi + if [ "$COMPILE_SSL" ]; then COMPILE_SSL="$COMPILE_SSL" VARIANT="$VARIANT" ./tests/install-openssl3.sh; fi - name: Build swtpm run: |
@@ -129,4 +129,4 @@ jobs: run: $CC --version - name: Compile - run: CC="$CC" VARIANT="$VARIANT" ./build.sh + run: CC="$CC" VARIANT="$VARIANT" COMPILE_SSL="$COMPILE_SSL" ./build.sh
.travis.yml +1 -1
@@ -95,4 +95,4 @@ script: - INSTALL="${DISTRO#${REPO}}" - INSTALL="${INSTALL%%:*}" - INSTALL="${INSTALL%%/*}" - - $CONTAINER run $CONTAINER_ARGS -t ima-evm-utils /bin/sh -c "if [ \"$VARIANT\" ]; then ARCH=\"$ARCH\" ./ci/$INSTALL.$VARIANT.sh; fi && ARCH=\"$ARCH\" CC=\"$CC\" TSS=\"$TSS\" ./ci/$INSTALL.sh && if [ "$COMPILE_SSL" ]; then COMPILE_SSL="$COMPILE_SSL" ./tests/install-openssl3.sh; fi && if [ ! \"$VARIANT\" ]; then which tpm_server || which swtpm || if which tssstartup; then ./tests/install-swtpm.sh; fi; fi && CC=\"$CC\" VARIANT=\"$VARIANT\" ./build.sh" + - $CONTAINER run $CONTAINER_ARGS -t ima-evm-utils /bin/sh -c "if [ \"$VARIANT\" ]; then ARCH=\"$ARCH\" ./ci/$INSTALL.$VARIANT.sh; fi && ARCH=\"$ARCH\" CC=\"$CC\" TSS=\"$TSS\" ./ci/$INSTALL.sh && if [ \"$COMPILE_SSL\" ]; then COMPILE_SSL=\"$COMPILE_SSL\" VARIANT=\"$VARIANT\" ./tests/install-openssl3.sh; fi && if [ ! \"$VARIANT\" ]; then which tpm_server || which swtpm || if which tssstartup; then ./tests/install-swtpm.sh; fi; fi && CC=\"$CC\" VARIANT=\"$VARIANT\" COMPILE_SSL=\"$COMPILE_SSL\" ./build.sh"
build.sh +8 -0
@@ -32,6 +32,14 @@ log_exit() cd `dirname $0` +if [ "$COMPILE_SSL" ]; then + echo "COMPILE_SSL: $COMPILE_SSL" + export CFLAGS="-I/opt/openssl3/include $CFLAGS" + export LD_LIBRARY_PATH="/opt/openssl3/lib64:/opt/openssl3/lib:$HOME/src/ima-evm-utils/src/.libs:$LD_LIBRARY_PATH" + export LDFLAGS="-L/opt/openssl3/lib64 -L/opt/openssl3/lib $LDFLAGS" + export PATH="/opt/openssl3/bin:$HOME/src/ima-evm-utils/src/.libs:$PATH" +fi + case "$VARIANT" in i386) echo "32-bit compilation"
src/evmctl.c +3 -1
@@ -2977,8 +2977,10 @@ int main(int argc, char *argv[])#if CONFIG_IMA_EVM_ENGINE case 139 :/* --engine e */ imaevm_params.eng =setup_engine (optarg); -if (!imaevm_params.eng) +if (!imaevm_params.eng) { +log_info ("setup_engine failed\n" ); goto error; + }break ;#endif case 140 :/* --xattr-user */
tests/install-openssl3.sh +8 -1
@@ -13,7 +13,14 @@ wget --no-check-certificate https://github.com/openssl/openssl/archive/refs/tags tar --no-same-owner -xzf ${version}.tar.gz cd openssl-${version} -./Configure --prefix=/opt/openssl3 --openssldir=/opt/openssl3/ssl +if [ "$VARIANT" = "i386" ]; then + echo "32-bit compilation" + FLAGS="-m32 linux-generic32" +fi + +./Configure $FLAGS no-engine no-dynamic-engine --prefix=/opt/openssl3 --openssldir=/opt/openssl3 +# Uncomment for debugging +# perl configdata.pm --dump | grep engine make -j$(nproc) # only install apps and library sudo make install_sw
Signature · 1 line
2.31.1
Mimi Zohar
maintainerPATCH v4 17/17 Fix d2i_x509_fp failure
In reply to Mimi ZoharBefore calling d2i_x509_fp(), make sure the keyfile is a regular file.
--- src/libimaevm.c | 11 +++++++++++ 1 file changed, 11 insertions(+)
src/libimaevm.c +11 -0
@@ -250,6 +250,7 @@ EVP_PKEY *read_pub_pkey(const char *keyfile, int x509) {FILE *fp;EVP_PKEY *pkey =NULL ; +struct stat st;if (!keyfile)return NULL ;
@@ -262,6 +263,16 @@ EVP_PKEY *read_pub_pkey(const char *keyfile, int x509) }if (x509) { +if (fstat (fileno (fp), &st) ==-1 ) + goto out; + +if ((st.st_mode &S_IFMT ) !=S_IFREG ) { +if (imaevm_params.verbose >LOG_INFO ) +log_err ("Keyfile is not regular file: %s\n" , + keyfile); + goto out; + } +X509 *crt =d2i_X509_fp (fp,NULL );if (!crt) {
Signature · 1 line
2.31.1
Re: [PATCH ima-evm-utils v4 17/17] Fix d2i_x509_fp failure
Quoted 20 lines · Mimi Zohar
Before calling
d2i_x509_fp(), make sure the keyfile is a regular file.Signed-off-by Mimi Zohar <[email protected]>--- src/libimaevm.c | 11 +++++++++++ 1 file changed, 11 insertions(+)src/libimaevm.c +1
-0@@ -250,6 +250,7 @@ EVP_PKEY *read_pub_pkey(const char *keyfile, int x509) {FILE *fp;EVP_PKEY *pkey =NULL ; +struct stat st;if (!keyfile)return NULL ;
src/libimaevm.c EVP_PKEY *read_pub_pkey(const char *keyfile, int x509) · line 268
Quoted 6 lines
src/libimaevm.c +3
-0@@ -262,6 +263,16 @@ EVP_PKEY *read_pub_pkey(const char *keyfile, int x509) }if (x509) { +if (fstat (fileno (fp), &st) ==-1 ) + goto out; +
If this was to ever happen evmctl may just terminate without an error message.
src/libimaevm.c EVP_PKEY *read_pub_pkey(const char *keyfile, int x509) · line 269
Quoted 1 line
src/libimaevm.c +1
-0+if ((st.st_mode &S_IFMT ) !=S_IFREG ) {
This function can also read plain public keys in the else branch. Should this test cover both cases?
Quoted 9 lines
src/libimaevm.c +6
-0+if (imaevm_params.verbose >LOG_INFO ) +log_err ("Keyfile is not regular file: %s\n" , + keyfile); + goto out; + } +X509 *crt =d2i_X509_fp (fp,NULL );if (!crt) {