Skip to contentSkip to conversation

First batch of defconfig removals

PATCH In review Thomas Petazzoni via buildroot 2 participants 24 messages Nov 1, 2022 – Nov 7, 2022 Arm/Allwinner sunXi SoC support

lore
Share & tools
lore
#0 lore raw

cover First batch of defconfig removals

Hello,

This patch series proposes to remove 21 defconfigs which have been failing to build for month. All of these defconfigs have already been listed in an e-mail sent on August 6, 2022 [0] to the relevant defconfig maintainers, and they still haven't been fixed. Close to 3 months later, it's time to remove them, with the goal of having all defconfigs building for the upcoming 2022.11 release.

I'm proposing to give one extra week (until November 7) before applying these patches, to see if some of the defconfig maintainers send patches to fix the defconfigs they are in charge of, or if anybody else steps up.

[0] https://lore.kernel.org/buildroot/20220806224338.0159e15c@windsurf/

Thanks,

Thomas Petazzoni

Thomas Petazzoni (21):
configs/amarula_a64_relic: remove defconfig configs/arm_juno: remove defconfig configs/bananapi_m1: remove defconfig configs/bananapi_m1_plus: remove defconfig configs/bananapi_m2_plus: remove defconfig configs/bananapi_m64: remove defconfig configs/friendlyarm_nanopc_t4: remove defconfig configs/friendlyarm_nanopi_a64: remove defconfig configs/friendlyarm_nanopi_m1: remove defconfig configs/friendlyarm_nanopi_m1: remove defconfig configs/friendlyarm_nanopi_m4: remove defconfig configs/friendlyarm_nanopi_neo2: remove defconfig configs/friendlyarm_nanopi_neo4: remove defconfig configs/friendlyarm_nanopi_neo_plus2: remove defconfig configs/friendlyarm_nanopi_r1: remove defconfig configs/orangepi_pc2: remove defconfig configs/orangepi_plus: remove defconfig configs/orangepi_prime: remove defconfig configs/orangepi_rk3399: remove defconfig configs/orangepi_win: remove defconfig configs/pine64: remove defconfig

 DEVELOPERS                                    |  38 ----
 board/amarula/a64-relic/extlinux.conf         |   4 -
 board/amarula/a64-relic/genimage.cfg          |  11 --
 board/amarula/a64-relic/post-build.sh         |   4 -
 board/amarula/a64-relic/readme.txt            |  90 ----------
 .../lib/firmware/brcm/brcmfmac4330-sdio.txt   |  83 ---------
 board/arm/juno/linux-juno-defconfig           | 169 -----------------
 board/arm/juno/readme.txt                     | 134 --------------
 board/bananapi/bananapi-m1/boot.cmd           |   7 -
 board/bananapi/bananapi-m1/genimage.cfg       |  34 ----
 board/bananapi/bananapi-m1/readme.txt         |  37 ----
 board/bananapi/bananapi-m64/boot.cmd          |   6 -
 board/bananapi/bananapi-m64/genimage.cfg      |  40 -----
 board/bananapi/bananapi-m64/readme.txt        |  37 ----
 board/friendlyarm/nanopc-t4/extlinux.conf     |   4 -
 board/friendlyarm/nanopc-t4/genimage.cfg      |  39 ----
 board/friendlyarm/nanopc-t4/post-build.sh     |   5 -
 board/friendlyarm/nanopc-t4/readme.txt        |  45 -----
 board/friendlyarm/nanopi-a64/boot.cmd         |   6 -
 board/friendlyarm/nanopi-a64/genimage.cfg     |  40 -----
 board/friendlyarm/nanopi-a64/readme.txt       |  37 ----
 board/friendlyarm/nanopi-m1-plus/boot.cmd     |   8 -
 board/friendlyarm/nanopi-m1-plus/genimage.cfg |  36 ----
 board/friendlyarm/nanopi-m1-plus/readme.txt   |  29 ---
 board/friendlyarm/nanopi-m1/boot.cmd          |   8 -
 board/friendlyarm/nanopi-m1/genimage.cfg      |  37 ----
 board/friendlyarm/nanopi-m1/readme.txt        |  29 ---
 board/friendlyarm/nanopi-m4/extlinux.conf     |   4 -
 board/friendlyarm/nanopi-m4/genimage.cfg      |  39 ----
 board/friendlyarm/nanopi-m4/post-build.sh     |   5 -
 board/friendlyarm/nanopi-m4/readme.txt        |  45 -----
 .../nanopi-neo-plus2/extlinux.conf            |   4 -
 .../friendlyarm/nanopi-neo-plus2/genimage.cfg |  40 -----
 .../nanopi-neo-plus2/linux-extras.config      |  10 --
 .../nanopi-neo-plus2/post-build.sh            |   4 -
 board/friendlyarm/nanopi-neo-plus2/readme.txt |  37 ----
 ...3430-sdio.friendlyarm,nanopi-neo-plus2.txt |  53 ------
 board/friendlyarm/nanopi-neo2/boot.cmd        |   6 -
 board/friendlyarm/nanopi-neo2/genimage.cfg    |  40 -----
 board/friendlyarm/nanopi-neo2/readme.txt      |  37 ----
 board/friendlyarm/nanopi-neo4/extlinux.conf   |   4 -
 board/friendlyarm/nanopi-neo4/genimage.cfg    |  22 ---
 board/friendlyarm/nanopi-neo4/post-build.sh   |   5 -
 board/friendlyarm/nanopi-neo4/readme.txt      |  53 ------
 board/friendlyarm/nanopi-r1/boot.cmd          |   8 -
 board/friendlyarm/nanopi-r1/genimage.cfg      |  37 ----
 .../nanopi-r1/kernel/linux-extras.config      |   2 -
 .../nanopi-r1/kernel/sun8i-h3-nanopi-r1.dts   | 170 ------------------
 board/friendlyarm/nanopi-r1/readme.txt        |  29 ---
 .../nanopi-r1/uboot/nanopi_r1_defconfig       |  22 ---
 .../nanopi-r1/uboot/sun8i-h3-nanopi-r1.dts    | 102 -----------
 board/orangepi/orangepi-pc2/boot.cmd          |   6 -
 board/orangepi/orangepi-pc2/genimage.cfg      |  40 -----
 board/orangepi/orangepi-pc2/readme.txt        |  37 ----
 board/orangepi/orangepi-plus/boot.cmd         |   8 -
 board/orangepi/orangepi-plus/genimage.cfg     |  36 ----
 board/orangepi/orangepi-plus/readme.txt       |  29 ---
 board/orangepi/orangepi-prime/boot.cmd        |   6 -
 board/orangepi/orangepi-prime/genimage.cfg    |  40 -----
 board/orangepi/orangepi-prime/readme.txt      |  37 ----
 board/orangepi/orangepi-rk3399/extlinux.conf  |   4 -
 board/orangepi/orangepi-rk3399/genimage.cfg   |  38 ----
 board/orangepi/orangepi-rk3399/post-build.sh  |   5 -
 board/orangepi/orangepi-rk3399/readme.txt     |  56 ------
 board/orangepi/orangepi-win/boot.cmd          |   6 -
 board/orangepi/orangepi-win/genimage.cfg      |  40 -----
 board/orangepi/orangepi-win/readme.txt        |  37 ----
 board/pine64/pine64/boot.cmd                  |   6 -
 board/pine64/pine64/genimage.cfg              |  40 -----
 board/pine64/pine64/readme.txt                |  38 ----
 board/sinovoip/m1-plus/boot.cmd               |   5 -
 board/sinovoip/m1-plus/genimage.cfg           |  38 ----
 board/sinovoip/m1-plus/linux-wifi.fragment    |  10 --
 ...nanapi-m1-plus-Disable-OOB-IRQ-for-b.patch |  39 ----
 board/sinovoip/m1-plus/post-build.sh          |   4 -
 board/sinovoip/m1-plus/readme.txt             |  64 -------
 ...rcmfmac43362-sdio.sinovoip,bpi-m1-plus.txt |   1 -
 .../lib/firmware/brcm/brcmfmac43362-sdio.txt  |  56 ------
 board/sinovoip/m2-plus/boot.cmd               |   7 -
 board/sinovoip/m2-plus/genimage.cfg           |  34 ----
 configs/amarula_a64_relic_defconfig           |  63 -------
 configs/arm_juno_defconfig                    |  23 ---
 configs/bananapi_m1_defconfig                 |  29 ---
 configs/bananapi_m1_plus_defconfig            |  45 -----
 configs/bananapi_m2_plus_defconfig            |  30 ----
 configs/bananapi_m64_defconfig                |  50 ------
 configs/friendlyarm_nanopc_t4_defconfig       |  53 ------
 configs/friendlyarm_nanopi_a64_defconfig      |  50 ------
 configs/friendlyarm_nanopi_m1_defconfig       |  45 -----
 configs/friendlyarm_nanopi_m1_plus_defconfig  |  45 -----
 configs/friendlyarm_nanopi_m4_defconfig       |  53 ------
 configs/friendlyarm_nanopi_neo2_defconfig     |  50 ------
 configs/friendlyarm_nanopi_neo4_defconfig     |  55 ------
 .../friendlyarm_nanopi_neo_plus2_defconfig    |  62 -------
 configs/friendlyarm_nanopi_r1_defconfig       |  49 -----
 configs/orangepi_pc2_defconfig                |  50 ------
 configs/orangepi_plus_defconfig               |  44 -----
 configs/orangepi_prime_defconfig              |  50 ------
 configs/orangepi_rk3399_defconfig             |  53 ------
 configs/orangepi_win_defconfig                |  48 -----
 configs/pine64_defconfig                      |  50 ------
 101 files changed, 3559 deletions(-)
 delete mode 100644 board/amarula/a64-relic/extlinux.conf
 delete mode 100644 board/amarula/a64-relic/genimage.cfg
 delete mode 100755 board/amarula/a64-relic/post-build.sh
 delete mode 100644 board/amarula/a64-relic/readme.txt
 delete mode 100644 board/amarula/a64-relic/rootfs_overlay/lib/firmware/brcm/brcmfmac4330-sdio.txt
 delete mode 100644 board/arm/juno/linux-juno-defconfig
 delete mode 100644 board/arm/juno/readme.txt
 delete mode 100644 board/bananapi/bananapi-m1/boot.cmd
 delete mode 100644 board/bananapi/bananapi-m1/genimage.cfg
 delete mode 100644 board/bananapi/bananapi-m1/readme.txt
 delete mode 100644 board/bananapi/bananapi-m64/boot.cmd
 delete mode 100644 board/bananapi/bananapi-m64/genimage.cfg
 delete mode 100644 board/bananapi/bananapi-m64/readme.txt
 delete mode 100644 board/friendlyarm/nanopc-t4/extlinux.conf
 delete mode 100644 board/friendlyarm/nanopc-t4/genimage.cfg
 delete mode 100755 board/friendlyarm/nanopc-t4/post-build.sh
 delete mode 100644 board/friendlyarm/nanopc-t4/readme.txt
 delete mode 100644 board/friendlyarm/nanopi-a64/boot.cmd
 delete mode 100644 board/friendlyarm/nanopi-a64/genimage.cfg
 delete mode 100644 board/friendlyarm/nanopi-a64/readme.txt
 delete mode 100644 board/friendlyarm/nanopi-m1-plus/boot.cmd
 delete mode 100644 board/friendlyarm/nanopi-m1-plus/genimage.cfg
 delete mode 100644 board/friendlyarm/nanopi-m1-plus/readme.txt
 delete mode 100644 board/friendlyarm/nanopi-m1/boot.cmd
 delete mode 100644 board/friendlyarm/nanopi-m1/genimage.cfg
 delete mode 100644 board/friendlyarm/nanopi-m1/readme.txt
 delete mode 100644 board/friendlyarm/nanopi-m4/extlinux.conf
 delete mode 100644 board/friendlyarm/nanopi-m4/genimage.cfg
 delete mode 100755 board/friendlyarm/nanopi-m4/post-build.sh
 delete mode 100644 board/friendlyarm/nanopi-m4/readme.txt
 delete mode 100644 board/friendlyarm/nanopi-neo-plus2/extlinux.conf
 delete mode 100644 board/friendlyarm/nanopi-neo-plus2/genimage.cfg
 delete mode 100644 board/friendlyarm/nanopi-neo-plus2/linux-extras.config
 delete mode 100755 board/friendlyarm/nanopi-neo-plus2/post-build.sh
 delete mode 100644 board/friendlyarm/nanopi-neo-plus2/readme.txt
 delete mode 100644 board/friendlyarm/nanopi-neo-plus2/rootfs_overlay/lib/firmware/brcm/brcmfmac43430-sdio.friendlyarm,nanopi-neo-plus2.txt
 delete mode 100644 board/friendlyarm/nanopi-neo2/boot.cmd
 delete mode 100644 board/friendlyarm/nanopi-neo2/genimage.cfg
 delete mode 100644 board/friendlyarm/nanopi-neo2/readme.txt
 delete mode 100644 board/friendlyarm/nanopi-neo4/extlinux.conf
 delete mode 100644 board/friendlyarm/nanopi-neo4/genimage.cfg
 delete mode 100755 board/friendlyarm/nanopi-neo4/post-build.sh
 delete mode 100644 board/friendlyarm/nanopi-neo4/readme.txt
 delete mode 100644 board/friendlyarm/nanopi-r1/boot.cmd
 delete mode 100644 board/friendlyarm/nanopi-r1/genimage.cfg
 delete mode 100644 board/friendlyarm/nanopi-r1/kernel/linux-extras.config
 delete mode 100644 board/friendlyarm/nanopi-r1/kernel/sun8i-h3-nanopi-r1.dts
 delete mode 100644 board/friendlyarm/nanopi-r1/readme.txt
 delete mode 100644 board/friendlyarm/nanopi-r1/uboot/nanopi_r1_defconfig
 delete mode 100644 board/friendlyarm/nanopi-r1/uboot/sun8i-h3-nanopi-r1.dts
 delete mode 100644 board/orangepi/orangepi-pc2/boot.cmd
 delete mode 100644 board/orangepi/orangepi-pc2/genimage.cfg
 delete mode 100644 board/orangepi/orangepi-pc2/readme.txt
 delete mode 100644 board/orangepi/orangepi-plus/boot.cmd
 delete mode 100644 board/orangepi/orangepi-plus/genimage.cfg
 delete mode 100644 board/orangepi/orangepi-plus/readme.txt
 delete mode 100644 board/orangepi/orangepi-prime/boot.cmd
 delete mode 100644 board/orangepi/orangepi-prime/genimage.cfg
 delete mode 100644 board/orangepi/orangepi-prime/readme.txt
 delete mode 100644 board/orangepi/orangepi-rk3399/extlinux.conf
 delete mode 100644 board/orangepi/orangepi-rk3399/genimage.cfg
 delete mode 100755 board/orangepi/orangepi-rk3399/post-build.sh
 delete mode 100644 board/orangepi/orangepi-rk3399/readme.txt
 delete mode 100644 board/orangepi/orangepi-win/boot.cmd
 delete mode 100644 board/orangepi/orangepi-win/genimage.cfg
 delete mode 100644 board/orangepi/orangepi-win/readme.txt
 delete mode 100644 board/pine64/pine64/boot.cmd
 delete mode 100644 board/pine64/pine64/genimage.cfg
 delete mode 100644 board/pine64/pine64/readme.txt
 delete mode 100644 board/sinovoip/m1-plus/boot.cmd
 delete mode 100644 board/sinovoip/m1-plus/genimage.cfg
 delete mode 100644 board/sinovoip/m1-plus/linux-wifi.fragment
 delete mode 100644 board/sinovoip/m1-plus/patches/linux/0001-ARM-dts-sun7i-bananapi-m1-plus-Disable-OOB-IRQ-for-b.patch
 delete mode 100755 board/sinovoip/m1-plus/post-build.sh
 delete mode 100644 board/sinovoip/m1-plus/readme.txt
 delete mode 120000 board/sinovoip/m1-plus/rootfs_overlay/lib/firmware/brcm/brcmfmac43362-sdio.sinovoip,bpi-m1-plus.txt
 delete mode 100644 board/sinovoip/m1-plus/rootfs_overlay/lib/firmware/brcm/brcmfmac43362-sdio.txt
 delete mode 100644 board/sinovoip/m2-plus/boot.cmd
 delete mode 100644 board/sinovoip/m2-plus/genimage.cfg
 delete mode 100644 configs/amarula_a64_relic_defconfig
 delete mode 100644 configs/arm_juno_defconfig
 delete mode 100644 configs/bananapi_m1_defconfig
 delete mode 100644 configs/bananapi_m1_plus_defconfig
 delete mode 100644 configs/bananapi_m2_plus_defconfig
 delete mode 100644 configs/bananapi_m64_defconfig
 delete mode 100644 configs/friendlyarm_nanopc_t4_defconfig
 delete mode 100644 configs/friendlyarm_nanopi_a64_defconfig
 delete mode 100644 configs/friendlyarm_nanopi_m1_defconfig
 delete mode 100644 configs/friendlyarm_nanopi_m1_plus_defconfig
 delete mode 100644 configs/friendlyarm_nanopi_m4_defconfig
 delete mode 100644 configs/friendlyarm_nanopi_neo2_defconfig
 delete mode 100644 configs/friendlyarm_nanopi_neo4_defconfig
 delete mode 100644 configs/friendlyarm_nanopi_neo_plus2_defconfig
 delete mode 100644 configs/friendlyarm_nanopi_r1_defconfig
 delete mode 100644 configs/orangepi_pc2_defconfig
 delete mode 100644 configs/orangepi_plus_defconfig
 delete mode 100644 configs/orangepi_prime_defconfig
 delete mode 100644 configs/orangepi_rk3399_defconfig
 delete mode 100644 configs/orangepi_win_defconfig
 delete mode 100644 configs/pine64_defconfig
Signature · 6 lines
2.37.3

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
#1 lore raw

PATCH 1/21 configs/amarula_a64_relic: remove defconfig

This defconfig has been failing to build for several months, with nobody stepping up to fix it. It's time to drop it.

See
https://lore.kernel.org/buildroot/20220806224338.0159e15c@windsurf/
for a notification on August 6, 2022 about the issues with this defconfig.

Fixes:

https://gitlab.com/buildroot.org/buildroot/-/jobs/3234498966

---
 DEVELOPERS                                    |  1 -
 board/amarula/a64-relic/extlinux.conf         |  4 -
 board/amarula/a64-relic/genimage.cfg          | 11 ---
 board/amarula/a64-relic/post-build.sh         |  4 -
 board/amarula/a64-relic/readme.txt            | 90 -------------------
 .../lib/firmware/brcm/brcmfmac4330-sdio.txt   | 83 -----------------
 configs/amarula_a64_relic_defconfig           | 63 -------------
 7 files changed, 256 deletions(-)
 delete mode 100644 board/amarula/a64-relic/extlinux.conf
 delete mode 100644 board/amarula/a64-relic/genimage.cfg
 delete mode 100755 board/amarula/a64-relic/post-build.sh
 delete mode 100644 board/amarula/a64-relic/readme.txt
 delete mode 100644 board/amarula/a64-relic/rootfs_overlay/lib/firmware/brcm/brcmfmac4330-sdio.txt
 delete mode 100644 configs/amarula_a64_relic_defconfig
DEVELOPERS +0 -1
index e1e919ce4f..15aa440c72 100644
@@ -1323,7 +1323,6 @@ F:	board/orangepi/orangepi-prime/
 F:	board/orangepi/orangepi-win/
 F:	board/orangepi/orangepi-zero-plus2/
 F:	board/pine64/
-F:	configs/amarula_a64_relic_defconfig
 F:	configs/amarula_vyasa_rk3288_defconfig
 F:	configs/asus_tinker_rk3288_defconfig
 F:	configs/bananapi_m1_defconfig
board/amarula/a64-relic/extlinux.conf deleted +0 -4
deleted file mode 100644
index 9f469846bc..0000000000
@@ -1,4 +0,0 @@
-label linux-4.17.0-rc3
-  kernel /Image
-  devicetree /sun50i-a64-amarula-relic.dtb
-  append console=ttyS0,115200 earlyprintk root=/dev/mmcblk1p4 rootwait
board/amarula/a64-relic/genimage.cfg deleted +0 -11
deleted file mode 100644
index 58b607f5fb..0000000000
@@ -1,11 +0,0 @@
-image boot.vfat {
-	vfat {
-		files = {
-			"Image",
-			"sun50i-a64-amarula-relic.dtb",
-			"extlinux"
-		}
-	}
-
-	size = 64M
-}
board/amarula/a64-relic/post-build.sh deleted +0 -4
deleted file mode 100755
index ec20fca7d9..0000000000
@@ -1,4 +0,0 @@
-#!/bin/sh
-BOARD_DIR="$(dirname $0)"
-
-install -m 0644 -D $BOARD_DIR/extlinux.conf $BINARIES_DIR/extlinux/extlinux.conf
board/amarula/a64-relic/readme.txt deleted +0 -90

90 lines not on this page · raw message

board/amarula/a64-relic/rootfs_overlay/lib/firmware/brcm/brcmfmac4330-sdio.txt deleted +0 -83

83 lines not on this page · raw message

configs/amarula_a64_relic_defconfig deleted +0 -63

63 lines not on this page · raw message

Signature · 6 lines
2.37.3

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
#2 lore raw

PATCH 2/21 configs/arm_juno: remove defconfig

In reply to Thomas Petazzoni via buildroot

This defconfig has been failing to build for several months, with nobody stepping up to fix it. It's time to drop it.

See
https://lore.kernel.org/buildroot/20220806224338.0159e15c@windsurf/
for a notification on August 6, 2022 about the issues with this defconfig.

Fixes:

https://gitlab.com/buildroot.org/buildroot/-/jobs/3234498972

---
 DEVELOPERS                          |   4 -
 board/arm/juno/linux-juno-defconfig | 169 ----------------------------
 board/arm/juno/readme.txt           | 134 ----------------------
 configs/arm_juno_defconfig          |  23 ----
 4 files changed, 330 deletions(-)
 delete mode 100644 board/arm/juno/linux-juno-defconfig
 delete mode 100644 board/arm/juno/readme.txt
 delete mode 100644 configs/arm_juno_defconfig
DEVELOPERS +0 -4
index 15aa440c72..3e03dd51f5 100644
@@ -1226,10 +1226,6 @@ F:	support/testing/tests/package/test_python_scipy.py
 N:	Gustavo Heinz <[email protected]>
 F:	package/python-m2crypto/
 
-N:	Gustavo Pimentel <[email protected]>
-F:	configs/arm_juno_defconfig
-F:	board/arm/juno/
-
 N:	Gwenhael Goavec-Merou <[email protected]>
 F:	board/terasic/de10nano_cyclone5/
 F:	configs/terasic_de10nano_cyclone5_defconfig
board/arm/juno/linux-juno-defconfig deleted +0 -169

169 lines not on this page · raw message

board/arm/juno/readme.txt deleted +0 -134

134 lines not on this page · raw message

configs/arm_juno_defconfig deleted +0 -23
deleted file mode 100644
index 5832986779..0000000000
@@ -1,23 +0,0 @@
-BR2_aarch64=y
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_6=y
-BR2_TARGET_GENERIC_HOSTNAME="juno-buildroot"
-BR2_TARGET_GENERIC_ISSUE="Welcome to SNPS Juno by Buildroot"
-BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.6"
-BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/arm/juno/linux-juno-defconfig"
-BR2_LINUX_KERNEL_DTS_SUPPORT=y
-BR2_LINUX_KERNEL_INTREE_DTS_NAME="arm/juno arm/juno-r1 arm/juno-r2"
-BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://github.com/ARM-software/arm-trusted-firmware.git"
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="v1.4"
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="juno"
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_FIP=y
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_UBOOT_AS_BL33=y
-BR2_TARGET_UBOOT=y
-BR2_TARGET_UBOOT_BOARDNAME="vexpress_aemv8a_juno"
-BR2_TARGET_UBOOT_CUSTOM_VERSION=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2016.03"
-BR2_TARGET_VEXPRESS_FIRMWARE=y
Signature · 6 lines
2.37.3

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
#3 lore raw

PATCH 3/21 configs/bananapi_m1: remove defconfig

In reply to Thomas Petazzoni via buildroot

This defconfig has been failing to build for several months, with nobody stepping up to fix it. It's time to drop it.

See
https://lore.kernel.org/buildroot/20220806224338.0159e15c@windsurf/
for a notification on August 6, 2022 about the issues with this defconfig.

Fixes:

https://gitlab.com/buildroot.org/buildroot/-/jobs/3234499003

---
 DEVELOPERS                              |  1 -
 board/bananapi/bananapi-m1/boot.cmd     |  7 -----
 board/bananapi/bananapi-m1/genimage.cfg | 34 -----------------------
 board/bananapi/bananapi-m1/readme.txt   | 37 -------------------------
 configs/bananapi_m1_defconfig           | 29 -------------------
 5 files changed, 108 deletions(-)
 delete mode 100644 board/bananapi/bananapi-m1/boot.cmd
 delete mode 100644 board/bananapi/bananapi-m1/genimage.cfg
 delete mode 100644 board/bananapi/bananapi-m1/readme.txt
 delete mode 100644 configs/bananapi_m1_defconfig
DEVELOPERS +0 -1
index 3e03dd51f5..9b1932ac61 100644
@@ -1321,7 +1321,6 @@ F:	board/orangepi/orangepi-zero-plus2/
 F:	board/pine64/
 F:	configs/amarula_vyasa_rk3288_defconfig
 F:	configs/asus_tinker_rk3288_defconfig
-F:	configs/bananapi_m1_defconfig
 F:	configs/bananapi_m64_defconfig
 F:	configs/engicam_imx6qdl_icore_defconfig
 F:	configs/engicam_imx6qdl_icore_qt5_defconfig
board/bananapi/bananapi-m1/boot.cmd deleted +0 -7
deleted file mode 100644
index 0cf6f4d63e..0000000000
@@ -1,7 +0,0 @@
-setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
-
-mmc dev 0
-fatload mmc 0 $kernel_addr_r zImage
-fatload mmc 0 $fdt_addr_r sun7i-a20-bananapi.dtb
-
-bootz $kernel_addr_r - $fdt_addr_r
board/bananapi/bananapi-m1/genimage.cfg deleted +0 -34
deleted file mode 100644
index ce62fbf712..0000000000
@@ -1,34 +0,0 @@
-image boot.vfat {
-	vfat {
-		files = {
-			"zImage",
-			"sun7i-a20-bananapi.dtb",
-			"boot.scr"
-		}
-	}
-
-	size = 64M
-}
-
-image sdcard.img {
-	hdimage {
-	}
-
-	partition u-boot {
-		in-partition-table = "no"
-		image = "u-boot-sunxi-with-spl.bin"
-		offset = 8K
-		size = 1016K # 1MB - 8KB
-	}
-
-	partition boot {
-		partition-type = 0xC
-		bootable = "true"
-		image = "boot.vfat"
-	}
-
-	partition rootfs {
-		partition-type = 0x83
-		image = "rootfs.ext4"
-	}
-}
board/bananapi/bananapi-m1/readme.txt deleted +0 -37
deleted file mode 100644
index 382ba63c49..0000000000
@@ -1,37 +0,0 @@
-Intro
-=====
-
-This default configuration will allow you to start experimenting with the
-buildroot environment for the Bananapi M1. With the current configuration
-it will bring-up the board, and allow access through the serial console.
-
-Bananapi M1 link:
-http://www.banana-pi.org/m1.html
-
-Wiki link:
-https://openedev.amarulasolutions.com/display/ODWIKI/Bananapi+M1
-
-This configuration uses U-Boot mainline and kernel mainline.
-
-How to build
-============
-
-    $ make bananapi_m1_defconfig
-    $ make
-
-Note: you will need access to the internet to download the required
-sources.
-
-How to write the SD card
-========================
-
-Once the build process is finished you will have an image called "sdcard.img"
-in the output/images/ directory.
-
-Copy the bootable "sdcard.img" onto an SD card with "dd":
-
-  $ sudo dd if=output/images/sdcard.img of=/dev/sdX
-  $ sudo sync
-
-Insert the micro SDcard in your Bananapi M1 and power it up. The console
-is on the serial line, 115200 8N1.
configs/bananapi_m1_defconfig deleted +0 -29
deleted file mode 100644
index 23da363345..0000000000
@@ -1,29 +0,0 @@
-BR2_arm=y
-BR2_cortex_a7=y
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_18=y
-BR2_TARGET_GENERIC_ISSUE="Welcome to Bananapi M1"
-BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
-BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/bananapi/bananapi-m1/genimage.cfg"
-BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.18.12"
-BR2_LINUX_KERNEL_DEFCONFIG="sunxi"
-BR2_LINUX_KERNEL_DTS_SUPPORT=y
-BR2_LINUX_KERNEL_INTREE_DTS_NAME="sun7i-a20-bananapi"
-BR2_TARGET_ROOTFS_EXT2=y
-BR2_TARGET_ROOTFS_EXT2_4=y
-BR2_TARGET_UBOOT=y
-BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2018.07"
-BR2_TARGET_UBOOT_BOARD_DEFCONFIG="Bananapi"
-BR2_TARGET_UBOOT_NEEDS_DTC=y
-BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
-BR2_TARGET_UBOOT_SPL=y
-BR2_TARGET_UBOOT_SPL_NAME="u-boot-sunxi-with-spl.bin"
-BR2_PACKAGE_HOST_UBOOT_TOOLS=y
-BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT=y
-BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT_SOURCE="board/bananapi/bananapi-m1/boot.cmd"
-BR2_PACKAGE_HOST_DOSFSTOOLS=y
-BR2_PACKAGE_HOST_GENIMAGE=y
-BR2_PACKAGE_HOST_MTOOLS=y
Signature · 6 lines
2.37.3

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
#4 lore raw

PATCH 4/21 configs/bananapi_m1_plus: remove defconfig

In reply to Thomas Petazzoni via buildroot

This defconfig has been failing to build for several months, with nobody stepping up to fix it. It's time to drop it.

See
https://lore.kernel.org/buildroot/20220806224338.0159e15c@windsurf/
for a notification on August 6, 2022 about the issues with this defconfig.

Fixes:

https://gitlab.com/buildroot.org/buildroot/-/jobs/3234499004

---
 DEVELOPERS                                    |  4 --
 board/sinovoip/m1-plus/boot.cmd               |  5 --
 board/sinovoip/m1-plus/genimage.cfg           | 38 -----------
 board/sinovoip/m1-plus/linux-wifi.fragment    | 10 ---
 ...nanapi-m1-plus-Disable-OOB-IRQ-for-b.patch | 39 -----------
 board/sinovoip/m1-plus/post-build.sh          |  4 --
 board/sinovoip/m1-plus/readme.txt             | 64 -------------------
 ...rcmfmac43362-sdio.sinovoip,bpi-m1-plus.txt |  1 -
 .../lib/firmware/brcm/brcmfmac43362-sdio.txt  | 56 ----------------
 configs/bananapi_m1_plus_defconfig            | 45 -------------
 10 files changed, 266 deletions(-)
 delete mode 100644 board/sinovoip/m1-plus/boot.cmd
 delete mode 100644 board/sinovoip/m1-plus/genimage.cfg
 delete mode 100644 board/sinovoip/m1-plus/linux-wifi.fragment
 delete mode 100644 board/sinovoip/m1-plus/patches/linux/0001-ARM-dts-sun7i-bananapi-m1-plus-Disable-OOB-IRQ-for-b.patch
 delete mode 100755 board/sinovoip/m1-plus/post-build.sh
 delete mode 100644 board/sinovoip/m1-plus/readme.txt
 delete mode 120000 board/sinovoip/m1-plus/rootfs_overlay/lib/firmware/brcm/brcmfmac43362-sdio.sinovoip,bpi-m1-plus.txt
 delete mode 100644 board/sinovoip/m1-plus/rootfs_overlay/lib/firmware/brcm/brcmfmac43362-sdio.txt
 delete mode 100644 configs/bananapi_m1_plus_defconfig
DEVELOPERS +0 -4
index 9b1932ac61..dc968f9c4f 100644
@@ -1009,10 +1009,6 @@ F:	configs/freescale_imx6ullevk_defconfig
 N:	Falco Hyfing <[email protected]>
 F:	package/python-pymodbus/
 
-N:	Filip Skoneczny <[email protected]>
-F:	board/sinovoip/m1-plus
-F:	configs/bananapi_m1_plus_defconfig
-
 N:	Florian Fainelli <[email protected]>
 F:	package/cpulimit/
 
board/sinovoip/m1-plus/boot.cmd deleted +0 -5
deleted file mode 100644
index 4829996474..0000000000
@@ -1,5 +0,0 @@
-setenv fdt_high ffffffff
-setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
-fatload mmc 0 $kernel_addr_r zImage
-fatload mmc 0 $fdt_addr_r sun7i-a20-bananapi-m1-plus.dtb
-bootz $kernel_addr_r - $fdt_addr_r
board/sinovoip/m1-plus/genimage.cfg deleted +0 -38
deleted file mode 100644
index 18a549e631..0000000000
@@ -1,38 +0,0 @@
-# Minimal SD card image for the Banana Pi M1+
-# Based on the Banana Pro genimage.cfg
-
-image boot.vfat {
-	vfat {
-		files = {
-			"zImage",
-			"sun7i-a20-bananapi-m1-plus.dtb",
-			"boot.scr"
-		}
-	}
-
-	size = 10M
-}
-
-image sdcard.img {
-	hdimage {
-	}
-
-	partition u-boot {
-		in-partition-table = "no"
-		image = "u-boot-sunxi-with-spl.bin"
-		offset = 8K
-		size = 1016K # 1MB - 8KB
-	}
-
-	partition boot {
-		partition-type = 0xC
-		bootable = "true"
-		image = "boot.vfat"
-	}
-
-	partition rootfs {
-		partition-type = 0x83
-		image = "rootfs.ext4"
-		size = 512M
-	}
-}
board/sinovoip/m1-plus/linux-wifi.fragment deleted +0 -10
deleted file mode 100644
index 5576d738ad..0000000000
@@ -1,10 +0,0 @@
-# Networking support
-CONFIG_WIRELESS=y
-CONFIG_CFG80211=y
-CONFIG_CFG80211_WEXT=y
-CONFIG_RFKILL=y
-
-# Network device support
-CONFIG_WLAN=y
-CONFIG_WLAN_VENDOR_BROADCOM=y
-CONFIG_BRCMFMAC=m
board/sinovoip/m1-plus/patches/linux/0001-ARM-dts-sun7i-bananapi-m1-plus-Disable-OOB-IRQ-for-b.patch deleted +0 -39
deleted file mode 100644
index b01b6b2829..0000000000
@@ -1,39 +0,0 @@
-From 58bae4096a7bf8d5d3bfbddb82cb37dd0561c938 Mon Sep 17 00:00:00 2001
-From: Filip Skoneczny <[email protected]>
-Date: Sun, 10 Jan 2021 19:07:14 +0100
-Subject: [PATCH] ARM: dts: sun7i: bananapi-m1-plus: Disable OOB IRQ for brcm
- wifi module
-
-    Based on 23bc805.
-    BugLink: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=908438
-
-Signed-off-by: Filip Skoneczny <[email protected]>
----
- arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts | 11 ++++++++---
- 1 file changed, 8 insertions(+), 3 deletions(-)
-
-diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts
-index 32d5d45a35c0..97f9987f51d7 100644
---- a/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts
-+++ b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts
-@@ -193,9 +193,14 @@ &mmc3 {
- 	brcmf: wifi@1 {
- 		reg = <1>;
- 		compatible = "brcm,bcm4329-fmac";
--		interrupt-parent = <&pio>;
--		interrupts = <7 15 IRQ_TYPE_LEVEL_LOW>;
--		interrupt-names = "host-wake";
-+		/*
-+		 * OOB interrupt support is broken ATM, drv probe failing with:
-+		 * ieee80211 phy0: brcmf_attach: dongle is not responding: err=-110
-+		 *
-+		 * interrupt-parent = <&pio>;
-+		 * interrupts = <7 15 IRQ_TYPE_LEVEL_LOW>;
-+		 * interrupt-names = "host-wake";
-+		 */
- 	};
- };
- 
--- 
-2.25.1
-
board/sinovoip/m1-plus/post-build.sh deleted +0 -4
deleted file mode 100755
index 4ee6fa3bc4..0000000000
@@ -1,4 +0,0 @@
-#!/bin/sh
-
-# Remove all but the brcmfmac43362 firmware files
-find $TARGET_DIR/lib/firmware/brcm -type f -not -name "brcmfmac43362*" -delete
board/sinovoip/m1-plus/readme.txt deleted +0 -64

64 lines not on this page · raw message

board/sinovoip/m1-plus/rootfs_overlay/lib/firmware/brcm/brcmfmac43362-sdio.sinovoip,bpi-m1-plus.txt deleted +0 -1
deleted file mode 120000
index 93947975ee..0000000000
@@ -1 +0,0 @@
-brcmfmac43362-sdio.txt
\ No newline at end of file
board/sinovoip/m1-plus/rootfs_overlay/lib/firmware/brcm/brcmfmac43362-sdio.txt deleted +0 -56

56 lines not on this page · raw message

configs/bananapi_m1_plus_defconfig deleted +0 -45

45 lines not on this page · raw message

Signature · 6 lines
2.37.3

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
#5 lore raw

PATCH 5/21 configs/bananapi_m2_plus: remove defconfig

In reply to Thomas Petazzoni via buildroot

This defconfig has been failing to build for several months, with nobody stepping up to fix it. It's time to drop it.

See
https://lore.kernel.org/buildroot/20220806224338.0159e15c@windsurf/
for a notification on August 6, 2022 about the issues with this defconfig.

Fixes:

https://gitlab.com/buildroot.org/buildroot/-/jobs/3234499005

---
 DEVELOPERS                          |  4 ----
 board/sinovoip/m2-plus/boot.cmd     |  7 ------
 board/sinovoip/m2-plus/genimage.cfg | 34 -----------------------------
 configs/bananapi_m2_plus_defconfig  | 30 -------------------------
 4 files changed, 75 deletions(-)
 delete mode 100644 board/sinovoip/m2-plus/boot.cmd
 delete mode 100644 board/sinovoip/m2-plus/genimage.cfg
 delete mode 100644 configs/bananapi_m2_plus_defconfig
DEVELOPERS +0 -4
index dc968f9c4f..4eade50385 100644
@@ -2145,10 +2145,6 @@ F:	configs/licheepi_zero_defconfig
 N:	Mike Frampton <[email protected]>
 F:	package/qcom-db410c-firmware/
 
-N:	Mike Harmony <[email protected]>
-F:	board/sinovoip/m2-plus/
-F:	configs/bananapi_m2_plus_defconfig
-
 N:	Mikhail Boiko <[email protected]>
 F:	package/libfribidi/
 
board/sinovoip/m2-plus/boot.cmd deleted +0 -7
deleted file mode 100644
index d22464a1c1..0000000000
@@ -1,7 +0,0 @@
-setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
-
-mmc dev 0
-fatload mmc 0 $kernel_addr_r zImage
-fatload mmc 0 $fdt_addr_r sun8i-h3-bananapi-m2-plus.dtb
-
-bootz $kernel_addr_r - $fdt_addr_r
board/sinovoip/m2-plus/genimage.cfg deleted +0 -34
deleted file mode 100644
index 9311e026dd..0000000000
@@ -1,34 +0,0 @@
-image boot.vfat {
-	vfat {
-		files = {
-			"zImage",
-			"sun8i-h3-bananapi-m2-plus.dtb",
-			"boot.scr"
-		}
-	}
-
-	size = 64M
-}
-
-image sdcard.img {
-	hdimage {
-	}
-
-	partition u-boot {
-		in-partition-table = "no"
-		image = "u-boot-sunxi-with-spl.bin"
-		offset = 8K
-		size = 1016K # 1MB - 8KB
-	}
-
-	partition boot {
-		partition-type = 0xC
-		bootable = "true"
-		image = "boot.vfat"
-	}
-
-	partition rootfs {
-		partition-type = 0x83
-		image = "rootfs.ext4"
-	}
-}
configs/bananapi_m2_plus_defconfig deleted +0 -30
deleted file mode 100644
index 77a403ce81..0000000000
@@ -1,30 +0,0 @@
-BR2_arm=y
-BR2_cortex_a7=y
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_0=y
-BR2_TARGET_GENERIC_ISSUE="Welcome to Bananapi M2 Plus"
-BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
-BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/sinovoip/m2-plus/genimage.cfg"
-BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.0"
-BR2_LINUX_KERNEL_DEFCONFIG="sunxi"
-BR2_LINUX_KERNEL_DTS_SUPPORT=y
-BR2_LINUX_KERNEL_INTREE_DTS_NAME="sun8i-h3-bananapi-m2-plus"
-BR2_TARGET_ROOTFS_EXT2=y
-BR2_TARGET_ROOTFS_EXT2_4=y
-# BR2_TARGET_ROOTFS_TAR is not set
-BR2_TARGET_UBOOT=y
-BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2019.01"
-BR2_TARGET_UBOOT_BOARD_DEFCONFIG="Sinovoip_BPI_M2_Plus"
-BR2_TARGET_UBOOT_NEEDS_DTC=y
-BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
-BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
-BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot-sunxi-with-spl.bin"
-BR2_PACKAGE_HOST_UBOOT_TOOLS=y
-BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT=y
-BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT_SOURCE="board/sinovoip/m2-plus/boot.cmd"
-BR2_PACKAGE_HOST_DOSFSTOOLS=y
-BR2_PACKAGE_HOST_GENIMAGE=y
-BR2_PACKAGE_HOST_MTOOLS=y
Signature · 6 lines
2.37.3

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
#6 lore raw

PATCH 6/21 configs/bananapi_m64: remove defconfig

In reply to Thomas Petazzoni via buildroot

This defconfig has been failing to build for several months, with nobody stepping up to fix it. It's time to drop it.

See
https://lore.kernel.org/buildroot/20220806224338.0159e15c@windsurf/
for a notification on August 6, 2022 about the issues with this defconfig.

Fixes:

https://gitlab.com/buildroot.org/buildroot/-/jobs/3234499008

---
 DEVELOPERS                               |  1 -
 board/bananapi/bananapi-m64/boot.cmd     |  6 ---
 board/bananapi/bananapi-m64/genimage.cfg | 40 -------------------
 board/bananapi/bananapi-m64/readme.txt   | 37 ------------------
 configs/bananapi_m64_defconfig           | 50 ------------------------
 5 files changed, 134 deletions(-)
 delete mode 100644 board/bananapi/bananapi-m64/boot.cmd
 delete mode 100644 board/bananapi/bananapi-m64/genimage.cfg
 delete mode 100644 board/bananapi/bananapi-m64/readme.txt
 delete mode 100644 configs/bananapi_m64_defconfig
DEVELOPERS +0 -1
index 4eade50385..3680dbe31b 100644
@@ -1317,7 +1317,6 @@ F:	board/orangepi/orangepi-zero-plus2/
 F:	board/pine64/
 F:	configs/amarula_vyasa_rk3288_defconfig
 F:	configs/asus_tinker_rk3288_defconfig
-F:	configs/bananapi_m64_defconfig
 F:	configs/engicam_imx6qdl_icore_defconfig
 F:	configs/engicam_imx6qdl_icore_qt5_defconfig
 F:	configs/engicam_imx6qdl_icore_rqs_defconfig
board/bananapi/bananapi-m64/boot.cmd deleted +0 -6
deleted file mode 100644
index d35c9b0b2c..0000000000
@@ -1,6 +0,0 @@
-setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
-
-fatload mmc 0 $kernel_addr_r Image
-fatload mmc 0 $fdt_addr_r sun50i-a64-bananapi-m64.dtb
-
-booti $kernel_addr_r - $fdt_addr_r
board/bananapi/bananapi-m64/genimage.cfg deleted +0 -40
deleted file mode 100644
index e922c0dba2..0000000000
@@ -1,40 +0,0 @@
-image boot.vfat {
-	vfat {
-		files = {
-			"Image",
-			"sun50i-a64-bananapi-m64.dtb",
-			"boot.scr"
-		}
-	}
-
-	size = 64M
-}
-
-image sdcard.img {
-	hdimage {
-	}
-
-	partition spl {
-		in-partition-table = "no"
-		image = "sunxi-spl.bin"
-		offset = 8K
-	}
-
-	partition u-boot {
-		in-partition-table = "no"
-		image = "u-boot.itb"
-		offset = 40K
-		size = 1M # 1MB - 40KB
-	}
-
-	partition boot {
-		partition-type = 0xC
-		bootable = "true"
-		image = "boot.vfat"
-	}
-
-	partition rootfs {
-		partition-type = 0x83
-		image = "rootfs.ext4"
-	}
-}
board/bananapi/bananapi-m64/readme.txt deleted +0 -37
deleted file mode 100644
index 0dec3e52ee..0000000000
@@ -1,37 +0,0 @@
-Intro
-=====
-
-This default configuration will allow you to start experimenting with the
-buildroot environment for the Bananapi M64. With the current configuration
-it will bring-up the board, and allow access through the serial console.
-
-Bananapi M64 link:
-http://www.banana-pi.org/m64.html
-
-Wiki link:
-https://openedev.amarulasolutions.com/display/ODWIKI/Bananapi+M64
-
-This configuration uses U-Boot mainline and kernel mainline.
-
-How to build
-============
-
-    $ make bananapi_m64_defconfig
-    $ make
-
-Note: you will need access to the internet to download the required
-sources.
-
-How to write the SD card
-========================
-
-Once the build process is finished you will have an image called "sdcard.img"
-in the output/images/ directory.
-
-Copy the bootable "sdcard.img" onto an SD card with "dd":
-
-  $ sudo dd if=output/images/sdcard.img of=/dev/sdX
-  $ sudo sync
-
-Insert the micro SDcard in your Bananapi M64 and power it up. The console
-is on the serial line, 115200 8N1.
configs/bananapi_m64_defconfig deleted +0 -50

50 lines not on this page · raw message

Signature · 6 lines
2.37.3

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
#7 lore raw

PATCH 7/21 configs/friendlyarm_nanopc_t4: remove defconfig

In reply to Thomas Petazzoni via buildroot

This defconfig has been failing to build for several months, with nobody stepping up to fix it. It's time to drop it.

See
https://lore.kernel.org/buildroot/20220806224338.0159e15c@windsurf/
for a notification on August 6, 2022 about the issues with this defconfig.

Fixes:

https://gitlab.com/buildroot.org/buildroot/-/jobs/3234499048

---
 DEVELOPERS                                |  2 -
 board/friendlyarm/nanopc-t4/extlinux.conf |  4 --
 board/friendlyarm/nanopc-t4/genimage.cfg  | 39 -----------------
 board/friendlyarm/nanopc-t4/post-build.sh |  5 ---
 board/friendlyarm/nanopc-t4/readme.txt    | 45 -------------------
 configs/friendlyarm_nanopc_t4_defconfig   | 53 -----------------------
 6 files changed, 148 deletions(-)
 delete mode 100644 board/friendlyarm/nanopc-t4/extlinux.conf
 delete mode 100644 board/friendlyarm/nanopc-t4/genimage.cfg
 delete mode 100755 board/friendlyarm/nanopc-t4/post-build.sh
 delete mode 100644 board/friendlyarm/nanopc-t4/readme.txt
 delete mode 100644 configs/friendlyarm_nanopc_t4_defconfig
DEVELOPERS +0 -2
index 3680dbe31b..742f5d708a 100644
@@ -2748,14 +2748,12 @@ F:	package/powertop/
 
 N:	Suniel Mahesh <[email protected]>
 F:	board/firefly/
-F:	board/friendlyarm/nanopc-t4
 F:	board/friendlyarm/nanopi-m4
 F:	board/orangepi/orangepi-rk3399
 F:	board/pine64/rockpro64
 F:	board/radxa/rockpi-4
 F:	board/radxa/rockpi-n8
 F:	board/radxa/rockpi-n10
-F:	configs/friendlyarm_nanopc_t4_defconfig
 F:	configs/friendlyarm_nanopi_m4_defconfig
 F:	configs/orangepi_rk3399_defconfig
 F:	configs/roc_pc_rk3399_defconfig
board/friendlyarm/nanopc-t4/extlinux.conf deleted +0 -4
deleted file mode 100644
index 31c6b30d32..0000000000
@@ -1,4 +0,0 @@
-label RK3399_NanoPC_T4 linux
-  kernel /Image
-  devicetree /rk3399-nanopc-t4.dtb
-  append earlycon=uart8250,mmio32,0xff1a0000 root=/dev/mmcblk1p4 rootwait
board/friendlyarm/nanopc-t4/genimage.cfg deleted +0 -39
deleted file mode 100644
index 1787322260..0000000000
@@ -1,39 +0,0 @@
-image boot.vfat {
-	vfat {
-		files = {
-			"Image",
-			"rk3399-nanopc-t4.dtb",
-			"extlinux"
-		}
-	}
-
-	size = 64M
-}
-
-image sdcard.img {
-	hdimage {
-		partition-table-type = "gpt"
-	}
-
-	partition loader1 {
-		image = "idbloader.img"
-		offset = 32K
-	}
-
-	partition loader2 {
-		image = "u-boot.itb"
-		offset = 8M
-	}
-
-	partition boot {
-		partition-type-uuid = F
-		bootable = "true"
-		image = "boot.vfat"
-		offset = 16M
-	}
-
-	partition rootfs {
-		partition-type-uuid = b921b045-1df0-41c3-af44-4c6f280d3fae
-		image = "rootfs.ext4"
-	}
-}
board/friendlyarm/nanopc-t4/post-build.sh deleted +0 -5
deleted file mode 100755
index ba29375c05..0000000000
@@ -1,5 +0,0 @@
-#!/bin/sh
-
-BOARD_DIR="$(dirname $0)"
-
-install -m 0644 -D $BOARD_DIR/extlinux.conf $BINARIES_DIR/extlinux/extlinux.conf
board/friendlyarm/nanopc-t4/readme.txt deleted +0 -45

45 lines not on this page · raw message

configs/friendlyarm_nanopc_t4_defconfig deleted +0 -53

53 lines not on this page · raw message

Signature · 6 lines
2.37.3

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
#8 lore raw

PATCH 8/21 configs/friendlyarm_nanopi_a64: remove defconfig

In reply to Thomas Petazzoni via buildroot

This defconfig has been failing to build for several months, with nobody stepping up to fix it. It's time to drop it.

See
https://lore.kernel.org/buildroot/20220806224338.0159e15c@windsurf/
for a notification on August 6, 2022 about the issues with this defconfig.

Fixes:

https://gitlab.com/buildroot.org/buildroot/-/jobs/3234499049

---
 DEVELOPERS                                |  2 -
 board/friendlyarm/nanopi-a64/boot.cmd     |  6 ---
 board/friendlyarm/nanopi-a64/genimage.cfg | 40 ------------------
 board/friendlyarm/nanopi-a64/readme.txt   | 37 -----------------
 configs/friendlyarm_nanopi_a64_defconfig  | 50 -----------------------
 5 files changed, 135 deletions(-)
 delete mode 100644 board/friendlyarm/nanopi-a64/boot.cmd
 delete mode 100644 board/friendlyarm/nanopi-a64/genimage.cfg
 delete mode 100644 board/friendlyarm/nanopi-a64/readme.txt
 delete mode 100644 configs/friendlyarm_nanopi_a64_defconfig
DEVELOPERS +0 -2
index 742f5d708a..479189c166 100644
@@ -1304,7 +1304,6 @@ F:	board/amarula/
 F:	board/asus/
 F:	board/bananapi/
 F:	board/engicam/
-F:	board/friendlyarm/nanopi-a64/
 F:	board/friendlyarm/nanopi-neo2/
 F:	board/olimex/a33_olinuxino/
 F:	board/olimex/a64-olinuxino/
@@ -1322,7 +1321,6 @@ F:	configs/engicam_imx6qdl_icore_qt5_defconfig
 F:	configs/engicam_imx6qdl_icore_rqs_defconfig
 F:	configs/engicam_imx6ul_geam_defconfig
 F:	configs/engicam_imx6ul_isiot_defconfig
-F:	configs/friendlyarm_nanopi_a64_defconfig
 F:	configs/friendlyarm_nanopi_neo2_defconfig
 F:	configs/olimex_a33_olinuxino_defconfig
 F:	configs/olimex_a64_olinuxino_defconfig
board/friendlyarm/nanopi-a64/boot.cmd deleted +0 -6
deleted file mode 100644
index 446bd85672..0000000000
@@ -1,6 +0,0 @@
-setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
-
-fatload mmc 0 $kernel_addr_r Image
-fatload mmc 0 $fdt_addr_r sun50i-a64-nanopi-a64.dtb
-
-booti $kernel_addr_r - $fdt_addr_r
board/friendlyarm/nanopi-a64/genimage.cfg deleted +0 -40
deleted file mode 100644
index 6907314149..0000000000
@@ -1,40 +0,0 @@
-image boot.vfat {
-	vfat {
-		files = {
-			"Image",
-			"sun50i-a64-nanopi-a64.dtb",
-			"boot.scr"
-		}
-	}
-
-	size = 64M
-}
-
-image sdcard.img {
-	hdimage {
-	}
-
-	partition spl {
-		in-partition-table = "no"
-		image = "sunxi-spl.bin"
-		offset = 8K
-	}
-
-	partition u-boot {
-		in-partition-table = "no"
-		image = "u-boot.itb"
-		offset = 40K
-		size = 1M # 1MB - 40KB
-	}
-
-	partition boot {
-		partition-type = 0xC
-		bootable = "true"
-		image = "boot.vfat"
-	}
-
-	partition rootfs {
-		partition-type = 0x83
-		image = "rootfs.ext4"
-	}
-}
board/friendlyarm/nanopi-a64/readme.txt deleted +0 -37
deleted file mode 100644
index 88c4e661cb..0000000000
@@ -1,37 +0,0 @@
-Intro
-=====
-
-This default configuration will allow you to start experimenting with the
-buildroot environment for the Nanopi A64. With the current configuration
-it will bring-up the board, and allow access through the serial console.
-
-Nanopi A64 link:
-http://nanopi.io/nanopi-a64.html
-
-Wiki link:
-https://openedev.amarulasolutions.com/display/ODWIKI/FriendlyARM+Nanopi+A64
-
-This configuration uses U-Boot mainline and kernel mainline.
-
-How to build
-============
-
-    $ make friendlyarm_nanopi_a64_defconfig
-    $ make
-
-Note: you will need access to the internet to download the required
-sources.
-
-How to write the SD card
-========================
-
-Once the build process is finished you will have an image called "sdcard.img"
-in the output/images/ directory.
-
-Copy the bootable "sdcard.img" onto an SD card with "dd":
-
-  $ sudo dd if=output/images/sdcard.img of=/dev/sdX
-  $ sudo sync
-
-Insert the micro SDcard in your Nanopi A64 and power it up. The console
-is on the serial line, 115200 8N1.
configs/friendlyarm_nanopi_a64_defconfig deleted +0 -50

50 lines not on this page · raw message

Signature · 6 lines
2.37.3

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
#9 lore raw

PATCH 9/21 configs/friendlyarm_nanopi_m1: remove defconfig

In reply to Thomas Petazzoni via buildroot

This defconfig has been failing to build for several months, with nobody stepping up to fix it. It's time to drop it.

See
https://lore.kernel.org/buildroot/20220806224338.0159e15c@windsurf/
for a notification on August 6, 2022 about the issues with this defconfig.

This defconfig did not even have an entry in the DEVELOPERS file.

Fixes:

https://gitlab.com/buildroot.org/buildroot/-/jobs/3234499050

---
 board/friendlyarm/nanopi-m1/boot.cmd     |  8 -----
 board/friendlyarm/nanopi-m1/genimage.cfg | 37 -------------------
 board/friendlyarm/nanopi-m1/readme.txt   | 29 ---------------
 configs/friendlyarm_nanopi_m1_defconfig  | 45 ------------------------
 4 files changed, 119 deletions(-)
 delete mode 100644 board/friendlyarm/nanopi-m1/boot.cmd
 delete mode 100644 board/friendlyarm/nanopi-m1/genimage.cfg
 delete mode 100644 board/friendlyarm/nanopi-m1/readme.txt
 delete mode 100644 configs/friendlyarm_nanopi_m1_defconfig
board/friendlyarm/nanopi-m1/boot.cmd deleted +0 -8
deleted file mode 100644
index b4d612ede7..0000000000
@@ -1,8 +0,0 @@
-setenv fdt_high ffffffff
-
-setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
-
-fatload mmc 0 $kernel_addr_r zImage
-fatload mmc 0 $fdt_addr_r sun8i-h3-nanopi-m1.dtb
-
-bootz $kernel_addr_r - $fdt_addr_r
board/friendlyarm/nanopi-m1/genimage.cfg deleted +0 -37
deleted file mode 100644
index 3b2b82ce96..0000000000
@@ -1,37 +0,0 @@
-# Minimal SD card image for the NanoPi M1
-#
-image boot.vfat {
-	vfat {
-		files = {
-			"zImage",
-			"sun8i-h3-nanopi-m1.dtb",
-			"boot.scr"
-		}
-	}
-
-	size = 10M
-}
-
-image sdcard.img {
-	hdimage {
-	}
-
-	partition u-boot {
-		in-partition-table = "no"
-		image = "u-boot-sunxi-with-spl.bin"
-		offset = 8K
-		size = 1016K # 1MB - 8KB
-	}
-
-	partition boot {
-		partition-type = 0xC
-		bootable = "true"
-		image = "boot.vfat"
-	}
-
-	partition rootfs {
-		partition-type = 0x83
-		image = "rootfs.ext4"
-		size = 512M
-	}
-}
board/friendlyarm/nanopi-m1/readme.txt deleted +0 -29
deleted file mode 100644
index 6a34c4239d..0000000000
@@ -1,29 +0,0 @@
-NanoPi M1
-
-Intro
-=====
-
-This default configuration will allow you to start experimenting with the
-buildroot environment for the NanoPi M1. With the current configuration
-it will bring-up the board, and allow access through the serial console.
-
-How to build it
-===============
-
-Configure Buildroot:
-
-    $ make friendlyarm_nanopi_m1_defconfig
-
-Compile everything and build the SD card image:
-
-    $ make
-
-How to write the SD card
-========================
-
-Once the build process is finished you will have an image called "sdcard.img"
-in the output/images/ directory.
-
-Copy the bootable "sdcard.img" onto an SD card with "dd":
-
-  $ sudo dd if=output/images/sdcard.img of=/dev/sdX
configs/friendlyarm_nanopi_m1_defconfig deleted +0 -45

45 lines not on this page · raw message

Signature · 6 lines
2.37.3

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
#10 lore raw

PATCH 10/21 configs/friendlyarm_nanopi_m1: remove defconfig

In reply to Thomas Petazzoni via buildroot

This defconfig has been failing to build for several months, with nobody stepping up to fix it. It's time to drop it.

See
https://lore.kernel.org/buildroot/20220806224338.0159e15c@windsurf/
for a notification on August 6, 2022 about the issues with this defconfig.

This defconfig did not even have an entry in the DEVELOPERS file.

Fixes:

https://gitlab.com/buildroot.org/buildroot/-/jobs/3234499051

---
 board/friendlyarm/nanopi-m1-plus/boot.cmd     |  8 ----
 board/friendlyarm/nanopi-m1-plus/genimage.cfg | 36 ---------------
 board/friendlyarm/nanopi-m1-plus/readme.txt   | 29 ------------
 configs/friendlyarm_nanopi_m1_plus_defconfig  | 45 -------------------
 4 files changed, 118 deletions(-)
 delete mode 100644 board/friendlyarm/nanopi-m1-plus/boot.cmd
 delete mode 100644 board/friendlyarm/nanopi-m1-plus/genimage.cfg
 delete mode 100644 board/friendlyarm/nanopi-m1-plus/readme.txt
 delete mode 100644 configs/friendlyarm_nanopi_m1_plus_defconfig
board/friendlyarm/nanopi-m1-plus/boot.cmd deleted +0 -8
deleted file mode 100644
index 35a1d65d3d..0000000000
@@ -1,8 +0,0 @@
-setenv fdt_high ffffffff
-
-setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
-
-fatload mmc 0 $kernel_addr_r zImage
-fatload mmc 0 $fdt_addr_r sun8i-h3-nanopi-m1-plus.dtb
-
-bootz $kernel_addr_r - $fdt_addr_r
board/friendlyarm/nanopi-m1-plus/genimage.cfg deleted +0 -36
deleted file mode 100644
index 5257cf89c7..0000000000
@@ -1,36 +0,0 @@
-# Minimal SD card image for the NanoPi M1 Plus
-#
-image boot.vfat {
-	vfat {
-		files = {
-			"zImage",
-			"sun8i-h3-nanopi-m1-plus.dtb",
-			"boot.scr"
-		}
-	}
-
-	size = 10M
-}
-
-image sdcard.img {
-	hdimage {
-	}
-
-	partition u-boot {
-		in-partition-table = "no"
-		image = "u-boot-sunxi-with-spl.bin"
-		offset = 8K
-		size = 1016K # 1MB - 8KB
-	}
-
-	partition boot {
-		partition-type = 0xC
-		bootable = "true"
-		image = "boot.vfat"
-	}
-
-	partition rootfs {
-		partition-type = 0x83
-		image = "rootfs.ext4"
-	}
-}
board/friendlyarm/nanopi-m1-plus/readme.txt deleted +0 -29
deleted file mode 100644
index 0327dec80e..0000000000
@@ -1,29 +0,0 @@
-NanoPi M1 Plus
-
-Intro
-=====
-
-This default configuration will allow you to start experimenting with the
-buildroot environment for the NanoPi M1 Plus. With the current configuration
-it will bring-up the board, and allow access through the serial console.
-
-How to build it
-===============
-
-Configure Buildroot:
-
-    $ make friendlyarm_nanopi_m1_plus_defconfig
-
-Compile everything and build the SD card image:
-
-    $ make
-
-How to write the SD card
-========================
-
-Once the build process is finished you will have an image called "sdcard.img"
-in the output/images/ directory.
-
-Copy the bootable "sdcard.img" onto an SD card with "dd":
-
-  $ sudo dd if=output/images/sdcard.img of=/dev/sdX
configs/friendlyarm_nanopi_m1_plus_defconfig deleted +0 -45

45 lines not on this page · raw message

Signature · 6 lines
2.37.3

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
#11 lore raw

PATCH 11/21 configs/friendlyarm_nanopi_m4: remove defconfig

In reply to Thomas Petazzoni via buildroot

This defconfig has been failing to build for several months, with nobody stepping up to fix it. It's time to drop it.

See
https://lore.kernel.org/buildroot/20220806224338.0159e15c@windsurf/
for a notification on August 6, 2022 about the issues with this defconfig.

Fixes:

https://gitlab.com/buildroot.org/buildroot/-/jobs/3234499052

---
 DEVELOPERS                                |  1 -
 board/friendlyarm/nanopi-m4/extlinux.conf |  4 --
 board/friendlyarm/nanopi-m4/genimage.cfg  | 39 -----------------
 board/friendlyarm/nanopi-m4/post-build.sh |  5 ---
 board/friendlyarm/nanopi-m4/readme.txt    | 45 -------------------
 configs/friendlyarm_nanopi_m4_defconfig   | 53 -----------------------
 6 files changed, 147 deletions(-)
 delete mode 100644 board/friendlyarm/nanopi-m4/extlinux.conf
 delete mode 100644 board/friendlyarm/nanopi-m4/genimage.cfg
 delete mode 100755 board/friendlyarm/nanopi-m4/post-build.sh
 delete mode 100644 board/friendlyarm/nanopi-m4/readme.txt
 delete mode 100644 configs/friendlyarm_nanopi_m4_defconfig
DEVELOPERS +0 -1
index 479189c166..889ce3a02c 100644
@@ -2752,7 +2752,6 @@ F:	board/pine64/rockpro64
 F:	board/radxa/rockpi-4
 F:	board/radxa/rockpi-n8
 F:	board/radxa/rockpi-n10
-F:	configs/friendlyarm_nanopi_m4_defconfig
 F:	configs/orangepi_rk3399_defconfig
 F:	configs/roc_pc_rk3399_defconfig
 F:	configs/rock_pi_4_defconfig
board/friendlyarm/nanopi-m4/extlinux.conf deleted +0 -4
deleted file mode 100644
index fb24f09eb1..0000000000
@@ -1,4 +0,0 @@
-label RK3399_NANOPI_M4 linux
-  kernel /Image
-  devicetree /rk3399-nanopi-m4.dtb
-  append earlycon=uart8250,mmio32,0xff1a0000 root=/dev/mmcblk1p4 rw rootwait
board/friendlyarm/nanopi-m4/genimage.cfg deleted +0 -39
deleted file mode 100644
index 3e6818eab9..0000000000
@@ -1,39 +0,0 @@
-image boot.vfat {
-	vfat {
-		files = {
-			"Image",
-			"rk3399-nanopi-m4.dtb",
-			"extlinux"
-		}
-	}
-
-	size = 64M
-}
-
-image sdcard.img {
-	hdimage {
-		partition-table-type = "gpt"
-	}
-
-	partition loader1 {
-		image = "idbloader.img"
-		offset = 32K
-	}
-
-	partition loader2 {
-		image = "u-boot.itb"
-		offset = 8M
-	}
-
-	partition boot {
-		partition-type-uuid = F
-		bootable = "true"
-		image = "boot.vfat"
-		offset = 16M
-	}
-
-	partition rootfs {
-		partition-type-uuid = b921b045-1df0-41c3-af44-4c6f280d3fae
-		image = "rootfs.ext4"
-	}
-}
board/friendlyarm/nanopi-m4/post-build.sh deleted +0 -5
deleted file mode 100755
index ba29375c05..0000000000
@@ -1,5 +0,0 @@
-#!/bin/sh
-
-BOARD_DIR="$(dirname $0)"
-
-install -m 0644 -D $BOARD_DIR/extlinux.conf $BINARIES_DIR/extlinux/extlinux.conf
board/friendlyarm/nanopi-m4/readme.txt deleted +0 -45

45 lines not on this page · raw message

configs/friendlyarm_nanopi_m4_defconfig deleted +0 -53

53 lines not on this page · raw message

Signature · 6 lines
2.37.3

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
#12 lore raw

PATCH 12/21 configs/friendlyarm_nanopi_neo2: remove defconfig

In reply to Thomas Petazzoni via buildroot

This defconfig has been failing to build for several months, with nobody stepping up to fix it. It's time to drop it.

See
https://lore.kernel.org/buildroot/20220806224338.0159e15c@windsurf/
for a notification on August 6, 2022 about the issues with this defconfig.

Fixes:

https://gitlab.com/buildroot.org/buildroot/-/jobs/3234499053

---
 DEVELOPERS                                 |  2 -
 board/friendlyarm/nanopi-neo2/boot.cmd     |  6 ---
 board/friendlyarm/nanopi-neo2/genimage.cfg | 40 -----------------
 board/friendlyarm/nanopi-neo2/readme.txt   | 37 ----------------
 configs/friendlyarm_nanopi_neo2_defconfig  | 50 ----------------------
 5 files changed, 135 deletions(-)
 delete mode 100644 board/friendlyarm/nanopi-neo2/boot.cmd
 delete mode 100644 board/friendlyarm/nanopi-neo2/genimage.cfg
 delete mode 100644 board/friendlyarm/nanopi-neo2/readme.txt
 delete mode 100644 configs/friendlyarm_nanopi_neo2_defconfig
DEVELOPERS +0 -2
index 889ce3a02c..a4bfad30ce 100644
@@ -1304,7 +1304,6 @@ F:	board/amarula/
 F:	board/asus/
 F:	board/bananapi/
 F:	board/engicam/
-F:	board/friendlyarm/nanopi-neo2/
 F:	board/olimex/a33_olinuxino/
 F:	board/olimex/a64-olinuxino/
 F:	board/orangepi/orangepi-lite2/
@@ -1321,7 +1320,6 @@ F:	configs/engicam_imx6qdl_icore_qt5_defconfig
 F:	configs/engicam_imx6qdl_icore_rqs_defconfig
 F:	configs/engicam_imx6ul_geam_defconfig
 F:	configs/engicam_imx6ul_isiot_defconfig
-F:	configs/friendlyarm_nanopi_neo2_defconfig
 F:	configs/olimex_a33_olinuxino_defconfig
 F:	configs/olimex_a64_olinuxino_defconfig
 F:	configs/orangepi_lite2_defconfig
board/friendlyarm/nanopi-neo2/boot.cmd deleted +0 -6
deleted file mode 100644
index 9a39f4afc9..0000000000
@@ -1,6 +0,0 @@
-setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
-
-fatload mmc 0 $kernel_addr_r Image
-fatload mmc 0 $fdt_addr_r sun50i-h5-nanopi-neo2.dtb
-
-booti $kernel_addr_r - $fdt_addr_r
board/friendlyarm/nanopi-neo2/genimage.cfg deleted +0 -40
deleted file mode 100644
index 3163a06592..0000000000
@@ -1,40 +0,0 @@
-image boot.vfat {
-	vfat {
-		files = {
-			"Image",
-			"sun50i-h5-nanopi-neo2.dtb",
-			"boot.scr"
-		}
-	}
-
-	size = 64M
-}
-
-image sdcard.img {
-	hdimage {
-	}
-
-	partition spl {
-		in-partition-table = "no"
-		image = "sunxi-spl.bin"
-		offset = 8K
-	}
-
-	partition u-boot {
-		in-partition-table = "no"
-		image = "u-boot.itb"
-		offset = 40K
-		size = 1M # 1MB - 40KB
-	}
-
-	partition boot {
-		partition-type = 0xC
-		bootable = "true"
-		image = "boot.vfat"
-	}
-
-	partition rootfs {
-		partition-type = 0x83
-		image = "rootfs.ext4"
-	}
-}
board/friendlyarm/nanopi-neo2/readme.txt deleted +0 -37
deleted file mode 100644
index 0f445e2bea..0000000000
@@ -1,37 +0,0 @@
-Intro
-=====
-
-This default configuration will allow you to start experimenting with the
-buildroot environment for the Nanopi NEO2. With the current configuration
-it will bring-up the board, and allow access through the serial console.
-
-Nanopi NEO2 link:
-http://nanopi.io/nanopi-neo2.html
-
-Wiki link:
-https://openedev.amarulasolutions.com/display/ODWIKI/FriendlyARM+NanoPi+NEO2
-
-This configuration uses U-Boot mainline and kernel mainline.
-
-How to build
-============
-
-    $ make friendlyarm_nanopi_neo2_defconfig
-    $ make
-
-Note: you will need access to the internet to download the required
-sources.
-
-How to write the SD card
-========================
-
-Once the build process is finished you will have an image called "sdcard.img"
-in the output/images/ directory.
-
-Copy the bootable "sdcard.img" onto an SD card with "dd":
-
-  $ sudo dd if=output/images/sdcard.img of=/dev/sdX
-  $ sudo sync
-
-Insert the micro SDcard in your Nanopi NEO2 and power it up. The console
-is on the serial line, 115200 8N1.
configs/friendlyarm_nanopi_neo2_defconfig deleted +0 -50

50 lines not on this page · raw message

Signature · 6 lines
2.37.3

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
#13 lore raw

PATCH 13/21 configs/friendlyarm_nanopi_neo4: remove defconfig

In reply to Thomas Petazzoni via buildroot

This defconfig has been failing to build for several months, with nobody stepping up to fix it. It's time to drop it.

See
https://lore.kernel.org/buildroot/20220806224338.0159e15c@windsurf/
for a notification on August 6, 2022 about the issues with this defconfig.

Fixes:

https://gitlab.com/buildroot.org/buildroot/-/jobs/3234499054

---
 DEVELOPERS                                  |  2 -
 board/friendlyarm/nanopi-neo4/extlinux.conf |  4 --
 board/friendlyarm/nanopi-neo4/genimage.cfg  | 22 ---------
 board/friendlyarm/nanopi-neo4/post-build.sh |  5 --
 board/friendlyarm/nanopi-neo4/readme.txt    | 53 --------------------
 configs/friendlyarm_nanopi_neo4_defconfig   | 55 ---------------------
 6 files changed, 141 deletions(-)
 delete mode 100644 board/friendlyarm/nanopi-neo4/extlinux.conf
 delete mode 100644 board/friendlyarm/nanopi-neo4/genimage.cfg
 delete mode 100755 board/friendlyarm/nanopi-neo4/post-build.sh
 delete mode 100644 board/friendlyarm/nanopi-neo4/readme.txt
 delete mode 100644 configs/friendlyarm_nanopi_neo4_defconfig
DEVELOPERS +0 -2
index a4bfad30ce..18355a444e 100644
@@ -1899,8 +1899,6 @@ F:	utils/config
 F:	utils/diffconfig
 
 N:	Marek Belisko <[email protected]>
-F:	board/friendlyarm/nanopi-neo4/
-F:	configs/friendlyarm_nanopi_neo4_defconfig
 F:	package/libatasmart/
 F:	package/polkit/
 F:	package/sg3_utils/
board/friendlyarm/nanopi-neo4/extlinux.conf deleted +0 -4
deleted file mode 100644
index 91eef67fb9..0000000000
@@ -1,4 +0,0 @@
-label NanoPi Neo4 linux
-  kernel /boot/Image
-  devicetree /boot/rk3399-nanopi-neo4.dtb
-  append earlycon=uart8250,mmio32,0xff1a0000 root=/dev/mmcblk1p1 rootwait
board/friendlyarm/nanopi-neo4/genimage.cfg deleted +0 -22
deleted file mode 100644
index 966c869273..0000000000
@@ -1,22 +0,0 @@
-image sdcard.img {
-	hdimage {
-	}
-
-	partition u-boot-tpl-spl-dtb {
-		in-partition-table = "no"
-		image = "idbloader.img"
-		offset = 32K
-	}
-
-	partition u-boot-dtb {
-		in-partition-table = "no"
-		image = "u-boot.itb"
-		offset = 8M
-		size = 30M
-	}
-
-	partition rootfs {
-		partition-type = 0x83
-		image = "rootfs.ext4"
-	}
-}
board/friendlyarm/nanopi-neo4/post-build.sh deleted +0 -5
deleted file mode 100755
index 1f5ff6a611..0000000000
@@ -1,5 +0,0 @@
-#!/bin/sh
-
-BOARD_DIR="$(dirname $0)"
-
-install -m 0644 -D $BOARD_DIR/extlinux.conf $TARGET_DIR/boot/extlinux/extlinux.conf
board/friendlyarm/nanopi-neo4/readme.txt deleted +0 -53

53 lines not on this page · raw message

configs/friendlyarm_nanopi_neo4_defconfig deleted +0 -55

55 lines not on this page · raw message

Signature · 6 lines
2.37.3

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
#14 lore raw

PATCH 14/21 configs/friendlyarm_nanopi_neo_plus2: remove defconfig

In reply to Thomas Petazzoni via buildroot

This defconfig has been failing to build for several months, with nobody stepping up to fix it. It's time to drop it.

See
https://lore.kernel.org/buildroot/20220806224338.0159e15c@windsurf/
for a notification on August 6, 2022 about the issues with this defconfig.

Fixes:

https://gitlab.com/buildroot.org/buildroot/-/jobs/3234499055

---
 DEVELOPERS                                    |  2 -
 .../nanopi-neo-plus2/extlinux.conf            |  4 --
 .../friendlyarm/nanopi-neo-plus2/genimage.cfg | 40 ------------
 .../nanopi-neo-plus2/linux-extras.config      | 10 ---
 .../nanopi-neo-plus2/post-build.sh            |  4 --
 board/friendlyarm/nanopi-neo-plus2/readme.txt | 37 -----------
 ...3430-sdio.friendlyarm,nanopi-neo-plus2.txt | 53 ----------------
 .../friendlyarm_nanopi_neo_plus2_defconfig    | 62 -------------------
 8 files changed, 212 deletions(-)
 delete mode 100644 board/friendlyarm/nanopi-neo-plus2/extlinux.conf
 delete mode 100644 board/friendlyarm/nanopi-neo-plus2/genimage.cfg
 delete mode 100644 board/friendlyarm/nanopi-neo-plus2/linux-extras.config
 delete mode 100755 board/friendlyarm/nanopi-neo-plus2/post-build.sh
 delete mode 100644 board/friendlyarm/nanopi-neo-plus2/readme.txt
 delete mode 100644 board/friendlyarm/nanopi-neo-plus2/rootfs_overlay/lib/firmware/brcm/brcmfmac43430-sdio.friendlyarm,nanopi-neo-plus2.txt
 delete mode 100644 configs/friendlyarm_nanopi_neo_plus2_defconfig
DEVELOPERS +0 -2
index 18355a444e..2050268173 100644
@@ -1783,8 +1783,6 @@ F:	package/ti-sgx-km/
 F:	package/ti-sgx-um/
 
 N:	Louis Aussedat <[email protected]>
-F:	board/friendlyarm/nanopi-neo-plus2/
-F:	configs/friendlyarm_nanopi_neo_plus2_defconfig
 F:	package/mfoc
 F:	package/libpam-nfc
 F:	package/python-dnspython/
board/friendlyarm/nanopi-neo-plus2/extlinux.conf deleted +0 -4
deleted file mode 100644
index fcb6f632c1..0000000000
@@ -1,4 +0,0 @@
-label linux
-  kernel /Image
-  devicetree /sun50i-h5-nanopi-neo-plus2.dtb
-  append console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
board/friendlyarm/nanopi-neo-plus2/genimage.cfg deleted +0 -40
deleted file mode 100644
index 9000201399..0000000000
@@ -1,40 +0,0 @@
-image boot.vfat {
-	vfat {
-		files = {
-			"Image",
-			"sun50i-h5-nanopi-neo-plus2.dtb",
-			"extlinux"
-		}
-	}
-
-	size = 64M
-}
-
-image sdcard.img {
-	hdimage {
-	}
-
-	partition spl {
-		in-partition-table = "no"
-		image = "sunxi-spl.bin"
-		offset = 8K
-	}
-
-	partition u-boot {
-		in-partition-table = "no"
-		image = "u-boot.itb"
-		offset = 40K
-		size = 1M # 1MB - 40KB
-	}
-
-	partition boot {
-		partition-type = 0xC
-		bootable = "true"
-		image = "boot.vfat"
-	}
-
-	partition rootfs {
-		partition-type = 0x83
-		image = "rootfs.ext4"
-	}
-}
board/friendlyarm/nanopi-neo-plus2/linux-extras.config deleted +0 -10
deleted file mode 100644
index 52b4b4b29e..0000000000
@@ -1,10 +0,0 @@
-# wireless core
-CONFIG_WIRELESS=y
-CONFIG_CFG80211=y
-CONFIG_MAC80211=y
-CONFIG_CFG80211_WEXT=y
-
-# wireless drivers
-CONFIG_WLAN=y
-CONFIG_WLAN_VENDOR_BROADCOM=y
-CONFIG_BRCMFMAC=m
board/friendlyarm/nanopi-neo-plus2/post-build.sh deleted +0 -4
deleted file mode 100755
index ec20fca7d9..0000000000
@@ -1,4 +0,0 @@
-#!/bin/sh
-BOARD_DIR="$(dirname $0)"
-
-install -m 0644 -D $BOARD_DIR/extlinux.conf $BINARIES_DIR/extlinux/extlinux.conf
board/friendlyarm/nanopi-neo-plus2/readme.txt deleted +0 -37
deleted file mode 100644
index ae59952029..0000000000
@@ -1,37 +0,0 @@
-Intro
-=====
-
-This default configuration will allow you to start experimenting with the
-buildroot environment for the Nanopi NEO Plus2. With the current configuration
-it will bring-up the board, and allow access through the serial console.
-
-Nanopi NEO2 link:
-http://nanopi.io/nanopi-neo-plus2.html
-
-Wiki link:
-http://wiki.friendlyarm.com/wiki/index.php/NanoPi_NEO_Plus2
-
-This configuration uses U-Boot mainline and kernel mainline.
-
-How to build
-============
-
-    $ make friendlyarm_nanopi_neo_plus2_defconfig
-    $ make
-
-Note: you will need access to the internet to download the required
-sources.
-
-How to write the SD card
-========================
-
-Once the build process is finished you will have an image called "sdcard.img"
-in the output/images/ directory.
-
-Copy the bootable "sdcard.img" onto an SD card with "dd":
-
-  $ sudo dd if=output/images/sdcard.img of=/dev/sdX
-  $ sudo sync
-
-Insert the micro SDcard in your Nanopi NEO Plus2 and power it up. The console
-is on the serial line, 115200 8N1.
board/friendlyarm/nanopi-neo-plus2/rootfs_overlay/lib/firmware/brcm/brcmfmac43430-sdio.friendlyarm,nanopi-neo-plus2.txt deleted +0 -53

53 lines not on this page · raw message

configs/friendlyarm_nanopi_neo_plus2_defconfig deleted +0 -62

62 lines not on this page · raw message

Signature · 6 lines
2.37.3

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
#15 lore raw

PATCH 15/21 configs/friendlyarm_nanopi_r1: remove defconfig

In reply to Thomas Petazzoni via buildroot

This defconfig has been failing to build for several months, with nobody stepping up to fix it. It's time to drop it.

See
https://lore.kernel.org/buildroot/20220806224338.0159e15c@windsurf/
for a notification on August 6, 2022 about the issues with this defconfig.

Fixes:

https://gitlab.com/buildroot.org/buildroot/-/jobs/3234499056

---
 DEVELOPERS                                    |   2 -
 board/friendlyarm/nanopi-r1/boot.cmd          |   8 -
 board/friendlyarm/nanopi-r1/genimage.cfg      |  37 ----
 .../nanopi-r1/kernel/linux-extras.config      |   2 -
 .../nanopi-r1/kernel/sun8i-h3-nanopi-r1.dts   | 170 ------------------
 board/friendlyarm/nanopi-r1/readme.txt        |  29 ---
 .../nanopi-r1/uboot/nanopi_r1_defconfig       |  22 ---
 .../nanopi-r1/uboot/sun8i-h3-nanopi-r1.dts    | 102 -----------
 configs/friendlyarm_nanopi_r1_defconfig       |  49 -----
 9 files changed, 421 deletions(-)
 delete mode 100644 board/friendlyarm/nanopi-r1/boot.cmd
 delete mode 100644 board/friendlyarm/nanopi-r1/genimage.cfg
 delete mode 100644 board/friendlyarm/nanopi-r1/kernel/linux-extras.config
 delete mode 100644 board/friendlyarm/nanopi-r1/kernel/sun8i-h3-nanopi-r1.dts
 delete mode 100644 board/friendlyarm/nanopi-r1/readme.txt
 delete mode 100644 board/friendlyarm/nanopi-r1/uboot/nanopi_r1_defconfig
 delete mode 100644 board/friendlyarm/nanopi-r1/uboot/sun8i-h3-nanopi-r1.dts
 delete mode 100644 configs/friendlyarm_nanopi_r1_defconfig
DEVELOPERS +0 -2
index 2050268173..a24fc168bc 100644
@@ -722,8 +722,6 @@ N:	David Pierret <[email protected]>
 F:	package/bat/
 
 N:	Davide Viti <[email protected]>
-F:	board/friendlyarm/nanopi-r1/
-F:	configs/friendlyarm_nanopi_r1_defconfig
 F:	package/flann/
 F:	package/python-paho-mqtt/
 F:	package/qhull/
board/friendlyarm/nanopi-r1/boot.cmd deleted +0 -8
deleted file mode 100644
index 9f0cdbfe51..0000000000
@@ -1,8 +0,0 @@
-setenv fdt_high ffffffff
-
-setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
-
-fatload mmc 0 $kernel_addr_r zImage
-fatload mmc 0 $fdt_addr_r sun8i-h3-nanopi-r1.dtb
-
-bootz $kernel_addr_r - $fdt_addr_r
board/friendlyarm/nanopi-r1/genimage.cfg deleted +0 -37
deleted file mode 100644
index a180311cae..0000000000
@@ -1,37 +0,0 @@
-# Minimal SD card image for the NanoPi M1
-#
-image boot.vfat {
-	vfat {
-		files = {
-			"zImage",
-			"sun8i-h3-nanopi-r1.dtb",
-			"boot.scr"
-		}
-	}
-
-	size = 10M
-}
-
-image sdcard.img {
-	hdimage {
-	}
-
-	partition u-boot {
-		in-partition-table = "no"
-		image = "u-boot-sunxi-with-spl.bin"
-		offset = 8K
-		size = 1016K # 1MB - 8KB
-	}
-
-	partition boot {
-		partition-type = 0xC
-		bootable = "true"
-		image = "boot.vfat"
-	}
-
-	partition rootfs {
-		partition-type = 0x83
-		image = "rootfs.ext4"
-		size = 512M
-	}
-}
board/friendlyarm/nanopi-r1/kernel/linux-extras.config deleted +0 -2
deleted file mode 100644
index 206b3810a7..0000000000
@@ -1,2 +0,0 @@
-# USB ethernet
-CONFIG_USB_RTL8152=y
board/friendlyarm/nanopi-r1/kernel/sun8i-h3-nanopi-r1.dts deleted +0 -170

170 lines not on this page · raw message

board/friendlyarm/nanopi-r1/readme.txt deleted +0 -29
deleted file mode 100644
index fa3114fc83..0000000000
@@ -1,29 +0,0 @@
-NanoPi R1
-
-Intro
-=====
-
-This default configuration will allow you to start experimenting with the
-buildroot environment for the NanoPi R1. With the current configuration
-it will bring-up the board, and allow access through the serial console.
-
-How to build it
-===============
-
-Configure Buildroot:
-
-    $ make friendlyarm_nanopi_r1_defconfig
-
-Compile everything and build the SD card image:
-
-    $ make
-
-How to write the SD card
-========================
-
-Once the build process is finished you will have an image called "sdcard.img"
-in the output/images/ directory.
-
-Copy the bootable "sdcard.img" onto an SD card with "dd":
-
-  $ sudo dd if=output/images/sdcard.img of=/dev/sdX
board/friendlyarm/nanopi-r1/uboot/nanopi_r1_defconfig deleted +0 -22
deleted file mode 100644
index e028b41a46..0000000000
@@ -1,22 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_SUNXI=y
-CONFIG_SPL=y
-CONFIG_MACH_SUN8I_H3=y
-CONFIG_DRAM_CLK=408
-CONFIG_DRAM_ZQ=3881979
-CONFIG_DRAM_ODT_EN=y
-CONFIG_MACPWR="PD6"
-# CONFIG_VIDEO_DE2 is not set
-CONFIG_NR_DRAM_BANKS=1
-# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_CONSOLE_MUX=y
-CONFIG_SYS_CLK_FREQ=480000000
-# CONFIG_CMD_FLASH is not set
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
-CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-nanopi-r1"
-CONFIG_SUN8I_EMAC=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
-CONFIG_MMC_SUNXI_SLOT_EXTRA=2
board/friendlyarm/nanopi-r1/uboot/sun8i-h3-nanopi-r1.dts deleted +0 -102

102 lines not on this page · raw message

configs/friendlyarm_nanopi_r1_defconfig deleted +0 -49

49 lines not on this page · raw message

Signature · 6 lines
2.37.3

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
#16 lore raw

PATCH 16/21 configs/orangepi_pc2: remove defconfig

In reply to Thomas Petazzoni via buildroot

This defconfig has been failing to build for several months, with nobody stepping up to fix it. It's time to drop it.

See
https://lore.kernel.org/buildroot/20220806224338.0159e15c@windsurf/
for a notification on August 6, 2022 about the issues with this defconfig.

Fixes:

https://gitlab.com/buildroot.org/buildroot/-/jobs/3234499136

---
 DEVELOPERS                               |  2 -
 board/orangepi/orangepi-pc2/boot.cmd     |  6 ---
 board/orangepi/orangepi-pc2/genimage.cfg | 40 -------------------
 board/orangepi/orangepi-pc2/readme.txt   | 37 ------------------
 configs/orangepi_pc2_defconfig           | 50 ------------------------
 5 files changed, 135 deletions(-)
 delete mode 100644 board/orangepi/orangepi-pc2/boot.cmd
 delete mode 100644 board/orangepi/orangepi-pc2/genimage.cfg
 delete mode 100644 board/orangepi/orangepi-pc2/readme.txt
 delete mode 100644 configs/orangepi_pc2_defconfig
DEVELOPERS +0 -2
index a24fc168bc..d040389eea 100644
@@ -1306,7 +1306,6 @@ F:	board/olimex/a33_olinuxino/
 F:	board/olimex/a64-olinuxino/
 F:	board/orangepi/orangepi-lite2/
 F:	board/orangepi/orangepi-one-plus
-F:	board/orangepi/orangepi-pc2/
 F:	board/orangepi/orangepi-prime/
 F:	board/orangepi/orangepi-win/
 F:	board/orangepi/orangepi-zero-plus2/
@@ -1322,7 +1321,6 @@ F:	configs/olimex_a33_olinuxino_defconfig
 F:	configs/olimex_a64_olinuxino_defconfig
 F:	configs/orangepi_lite2_defconfig
 F:	configs/orangepi_one_plus_defconfig
-F:	configs/orangepi_pc2_defconfig
 F:	configs/orangepi_prime_defconfig
 F:	configs/orangepi_win_defconfig
 F:	configs/orangepi_zero_plus2_defconfig
board/orangepi/orangepi-pc2/boot.cmd deleted +0 -6
deleted file mode 100644
index 4d4fc7bf67..0000000000
@@ -1,6 +0,0 @@
-setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
-
-fatload mmc 0 $kernel_addr_r Image
-fatload mmc 0 $fdt_addr_r sun50i-h5-orangepi-pc2.dtb
-
-booti $kernel_addr_r - $fdt_addr_r
board/orangepi/orangepi-pc2/genimage.cfg deleted +0 -40
deleted file mode 100644
index cc8695c9f1..0000000000
@@ -1,40 +0,0 @@
-image boot.vfat {
-	vfat {
-		files = {
-			"Image",
-			"sun50i-h5-orangepi-pc2.dtb",
-			"boot.scr"
-		}
-	}
-
-	size = 64M
-}
-
-image sdcard.img {
-	hdimage {
-	}
-
-	partition spl {
-		in-partition-table = "no"
-		image = "sunxi-spl.bin"
-		offset = 8K
-	}
-
-	partition u-boot {
-		in-partition-table = "no"
-		image = "u-boot.itb"
-		offset = 40K
-		size = 1M # 1MB - 40KB
-	}
-
-	partition boot {
-		partition-type = 0xC
-		bootable = "true"
-		image = "boot.vfat"
-	}
-
-	partition rootfs {
-		partition-type = 0x83
-		image = "rootfs.ext4"
-	}
-}
board/orangepi/orangepi-pc2/readme.txt deleted +0 -37
deleted file mode 100644
index 1200481952..0000000000
@@ -1,37 +0,0 @@
-Intro
-=====
-
-This default configuration will allow you to start experimenting with the
-buildroot environment for the Orangepi PC2. With the current configuration
-it will bring-up the board, and allow access through the serial console.
-
-Orangepi PC2 link:
-http://www.orangepi.org/orangepipc2/
-
-Wiki link:
-https://openedev.amarulasolutions.com/display/ODWIKI/Orangepi+PC2
-
-This configuration uses U-Boot mainline and kernel mainline.
-
-How to build
-============
-
-    $ make orangepi_pc2_defconfig
-    $ make
-
-Note: you will need access to the internet to download the required
-sources.
-
-How to write the SD card
-========================
-
-Once the build process is finished you will have an image called "sdcard.img"
-in the output/images/ directory.
-
-Copy the bootable "sdcard.img" onto an SD card with "dd":
-
-  $ sudo dd if=output/images/sdcard.img of=/dev/sdX
-  $ sudo sync
-
-Insert the micro SDcard in your Orangepi PC2 and power it up. The console
-is on the serial line, 115200 8N1.
configs/orangepi_pc2_defconfig deleted +0 -50

50 lines not on this page · raw message

Signature · 6 lines
2.37.3

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
#17 lore raw

PATCH 17/21 configs/orangepi_plus: remove defconfig

In reply to Thomas Petazzoni via buildroot

This defconfig has been failing to build for several months, with nobody stepping up to fix it. It's time to drop it.

See
https://lore.kernel.org/buildroot/20220806224338.0159e15c@windsurf/
for a notification on August 6, 2022 about the issues with this defconfig.

This defconfig did not even have an entry in the DEVELOPERS file.

Fixes:

https://gitlab.com/buildroot.org/buildroot/-/jobs/3234499140

---
 board/orangepi/orangepi-plus/boot.cmd     |  8 -----
 board/orangepi/orangepi-plus/genimage.cfg | 36 -------------------
 board/orangepi/orangepi-plus/readme.txt   | 29 ---------------
 configs/orangepi_plus_defconfig           | 44 -----------------------
 4 files changed, 117 deletions(-)
 delete mode 100644 board/orangepi/orangepi-plus/boot.cmd
 delete mode 100644 board/orangepi/orangepi-plus/genimage.cfg
 delete mode 100644 board/orangepi/orangepi-plus/readme.txt
 delete mode 100644 configs/orangepi_plus_defconfig
board/orangepi/orangepi-plus/boot.cmd deleted +0 -8
deleted file mode 100644
index 1a378cb918..0000000000
@@ -1,8 +0,0 @@
-setenv fdt_high ffffffff
-
-setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
-
-fatload mmc 0 $kernel_addr_r zImage
-fatload mmc 0 $fdt_addr_r sun8i-h3-orangepi-plus.dtb
-
-bootz $kernel_addr_r - $fdt_addr_r
board/orangepi/orangepi-plus/genimage.cfg deleted +0 -36
deleted file mode 100644
index 1ca30258dc..0000000000
@@ -1,36 +0,0 @@
-# Minimal SD card image for the OrangePi Plus\Plus2
-#
-image boot.vfat {
-	vfat {
-		files = {
-			"zImage",
-			"sun8i-h3-orangepi-plus.dtb",
-			"boot.scr"
-		}
-	}
-
-	size = 10M
-}
-
-image sdcard.img {
-	hdimage {
-	}
-
-	partition u-boot {
-		in-partition-table = "no"
-		image = "u-boot-sunxi-with-spl.bin"
-		offset = 8K
-		size = 1016K # 1MB - 8KB
-	}
-
-	partition boot {
-		partition-type = 0xC
-		bootable = "true"
-		image = "boot.vfat"
-	}
-
-	partition rootfs {
-		partition-type = 0x83
-		image = "rootfs.ext4"
-	}
-}
board/orangepi/orangepi-plus/readme.txt deleted +0 -29
deleted file mode 100644
index 7f871bcfab..0000000000
@@ -1,29 +0,0 @@
-OrangePi Plus/Plus2
-
-Intro
-=====
-
-This default configuration will allow you to start experimenting with the
-buildroot environment for the OrangePi Plus/Plus2. With the current configuration
-it will bring-up the board, and allow access through the serial console.
-
-How to build it
-===============
-
-Configure Buildroot:
-
-    $ make orangepi_plus_defconfig
-
-Compile everything and build the SD card image:
-
-    $ make
-
-How to write the SD card
-========================
-
-Once the build process is finished you will have an image called "sdcard.img"
-in the output/images/ directory.
-
-Copy the bootable "sdcard.img" onto an SD card with "dd":
-
-  $ sudo dd if=output/images/sdcard.img of=/dev/sdX
configs/orangepi_plus_defconfig deleted +0 -44

44 lines not on this page · raw message

Signature · 6 lines
2.37.3

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
#18 lore raw

PATCH 18/21 configs/orangepi_prime: remove defconfig

In reply to Thomas Petazzoni via buildroot

This defconfig has been failing to build for several months, with nobody stepping up to fix it. It's time to drop it.

See
https://lore.kernel.org/buildroot/20220806224338.0159e15c@windsurf/
for a notification on August 6, 2022 about the issues with this defconfig.

Fixes:

https://gitlab.com/buildroot.org/buildroot/-/jobs/3234499141

---
 DEVELOPERS                                 |  2 -
 board/orangepi/orangepi-prime/boot.cmd     |  6 ---
 board/orangepi/orangepi-prime/genimage.cfg | 40 -----------------
 board/orangepi/orangepi-prime/readme.txt   | 37 ----------------
 configs/orangepi_prime_defconfig           | 50 ----------------------
 5 files changed, 135 deletions(-)
 delete mode 100644 board/orangepi/orangepi-prime/boot.cmd
 delete mode 100644 board/orangepi/orangepi-prime/genimage.cfg
 delete mode 100644 board/orangepi/orangepi-prime/readme.txt
 delete mode 100644 configs/orangepi_prime_defconfig
DEVELOPERS +0 -2
index d040389eea..63bb700281 100644
@@ -1306,7 +1306,6 @@ F:	board/olimex/a33_olinuxino/
 F:	board/olimex/a64-olinuxino/
 F:	board/orangepi/orangepi-lite2/
 F:	board/orangepi/orangepi-one-plus
-F:	board/orangepi/orangepi-prime/
 F:	board/orangepi/orangepi-win/
 F:	board/orangepi/orangepi-zero-plus2/
 F:	board/pine64/
@@ -1321,7 +1320,6 @@ F:	configs/olimex_a33_olinuxino_defconfig
 F:	configs/olimex_a64_olinuxino_defconfig
 F:	configs/orangepi_lite2_defconfig
 F:	configs/orangepi_one_plus_defconfig
-F:	configs/orangepi_prime_defconfig
 F:	configs/orangepi_win_defconfig
 F:	configs/orangepi_zero_plus2_defconfig
 F:	configs/pine64_defconfig
board/orangepi/orangepi-prime/boot.cmd deleted +0 -6
deleted file mode 100644
index 34887880d8..0000000000
@@ -1,6 +0,0 @@
-setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
-
-fatload mmc 0 $kernel_addr_r Image
-fatload mmc 0 $fdt_addr_r sun50i-h5-orangepi-prime.dtb
-
-booti $kernel_addr_r - $fdt_addr_r
board/orangepi/orangepi-prime/genimage.cfg deleted +0 -40
deleted file mode 100644
index dde9a6485f..0000000000
@@ -1,40 +0,0 @@
-image boot.vfat {
-	vfat {
-		files = {
-			"Image",
-			"sun50i-h5-orangepi-prime.dtb",
-			"boot.scr"
-		}
-	}
-
-	size = 64M
-}
-
-image sdcard.img {
-	hdimage {
-	}
-
-	partition spl {
-		in-partition-table = "no"
-		image = "sunxi-spl.bin"
-		offset = 8K
-	}
-
-	partition u-boot {
-		in-partition-table = "no"
-		image = "u-boot.itb"
-		offset = 40K
-		size = 1M # 1MB - 40KB
-	}
-
-	partition boot {
-		partition-type = 0xC
-		bootable = "true"
-		image = "boot.vfat"
-	}
-
-	partition rootfs {
-		partition-type = 0x83
-		image = "rootfs.ext4"
-	}
-}
board/orangepi/orangepi-prime/readme.txt deleted +0 -37
deleted file mode 100644
index 5811884d4d..0000000000
@@ -1,37 +0,0 @@
-Intro
-=====
-
-This default configuration will allow you to start experimenting with the
-buildroot environment for the Orangepi Prime. With the current configuration
-it will bring-up the board, and allow access through the serial console.
-
-Orangepi Prime link:
-http://www.orangepi.org/OrangePiPrime/
-
-Wiki link:
-https://openedev.amarulasolutions.com/display/ODWIKI/Orangepi+Prime
-
-This configuration uses U-Boot mainline and kernel mainline.
-
-How to build
-============
-
-    $ make orangepi_prime_defconfig
-    $ make
-
-Note: you will need access to the internet to download the required
-sources.
-
-How to write the SD card
-========================
-
-Once the build process is finished you will have an image called "sdcard.img"
-in the output/images/ directory.
-
-Copy the bootable "sdcard.img" onto an SD card with "dd":
-
-  $ sudo dd if=output/images/sdcard.img of=/dev/sdX
-  $ sudo sync
-
-Insert the micro SDcard in your Orangepi Prime and power it up. The console
-is on the serial line, 115200 8N1.
configs/orangepi_prime_defconfig deleted +0 -50

50 lines not on this page · raw message

Signature · 6 lines
2.37.3

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
#19 lore raw

PATCH 19/21 configs/orangepi_rk3399: remove defconfig

In reply to Thomas Petazzoni via buildroot

This defconfig has been failing to build for several months, with nobody stepping up to fix it. It's time to drop it.

See
https://lore.kernel.org/buildroot/20220806224338.0159e15c@windsurf/
for a notification on August 6, 2022 about the issues with this defconfig.

Fixes:

https://gitlab.com/buildroot.org/buildroot/-/jobs/3234499144

---
 DEVELOPERS                                   |  2 -
 board/orangepi/orangepi-rk3399/extlinux.conf |  4 --
 board/orangepi/orangepi-rk3399/genimage.cfg  | 38 -------------
 board/orangepi/orangepi-rk3399/post-build.sh |  5 --
 board/orangepi/orangepi-rk3399/readme.txt    | 56 --------------------
 configs/orangepi_rk3399_defconfig            | 53 ------------------
 6 files changed, 158 deletions(-)
 delete mode 100644 board/orangepi/orangepi-rk3399/extlinux.conf
 delete mode 100644 board/orangepi/orangepi-rk3399/genimage.cfg
 delete mode 100755 board/orangepi/orangepi-rk3399/post-build.sh
 delete mode 100644 board/orangepi/orangepi-rk3399/readme.txt
 delete mode 100644 configs/orangepi_rk3399_defconfig
DEVELOPERS +0 -2
index 63bb700281..9ee13d5258 100644
@@ -2735,12 +2735,10 @@ F:	package/powertop/
 N:	Suniel Mahesh <[email protected]>
 F:	board/firefly/
 F:	board/friendlyarm/nanopi-m4
-F:	board/orangepi/orangepi-rk3399
 F:	board/pine64/rockpro64
 F:	board/radxa/rockpi-4
 F:	board/radxa/rockpi-n8
 F:	board/radxa/rockpi-n10
-F:	configs/orangepi_rk3399_defconfig
 F:	configs/roc_pc_rk3399_defconfig
 F:	configs/rock_pi_4_defconfig
 F:	configs/rock_pi_n8_defconfig
board/orangepi/orangepi-rk3399/extlinux.conf deleted +0 -4
deleted file mode 100644
index 157c6a715e..0000000000
@@ -1,4 +0,0 @@
-label RK3399_ORANGEPI linux
-  kernel /Image
-  devicetree /rk3399-orangepi.dtb
-  append earlycon=uart8250,mmio32,0xff1a0000 root=/dev/mmcblk1p4 rw rootwait
board/orangepi/orangepi-rk3399/genimage.cfg deleted +0 -38
deleted file mode 100644
index a02166172f..0000000000
@@ -1,38 +0,0 @@
-image boot.vfat {
-	vfat {
-		files = {
-			"Image",
-			"rk3399-orangepi.dtb",
-			"extlinux"
-		}
-	}
-
-	size = 64M
-}
-
-image sdcard.img {
-	hdimage {
-		partition-table-type = "gpt"
-	}
-
-	partition loader1 {
-		image = "idbloader.img"
-		offset = 32K
-	}
-
-	partition loader2 {
-		image = "u-boot.itb"
-		offset = 8M
-	}
-
-	partition boot {
-		partition-type-uuid = F
-		bootable = "true"
-		image = "boot.vfat"
-		offset = 16M
-	}
-
-	partition rootfs {
-		image = "rootfs.ext4"
-	}
-}
board/orangepi/orangepi-rk3399/post-build.sh deleted +0 -5
deleted file mode 100755
index ba29375c05..0000000000
@@ -1,5 +0,0 @@
-#!/bin/sh
-
-BOARD_DIR="$(dirname $0)"
-
-install -m 0644 -D $BOARD_DIR/extlinux.conf $BINARIES_DIR/extlinux/extlinux.conf
board/orangepi/orangepi-rk3399/readme.txt deleted +0 -56

56 lines not on this page · raw message

configs/orangepi_rk3399_defconfig deleted +0 -53

53 lines not on this page · raw message

Signature · 6 lines
2.37.3

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
#20 lore raw

PATCH 20/21 configs/orangepi_win: remove defconfig

In reply to Thomas Petazzoni via buildroot

This defconfig has been failing to build for several months, with nobody stepping up to fix it. It's time to drop it.

See
https://lore.kernel.org/buildroot/20220806224338.0159e15c@windsurf/
for a notification on August 6, 2022 about the issues with this defconfig.

Fixes:

https://gitlab.com/buildroot.org/buildroot/-/jobs/3234499145

---
 DEVELOPERS                               |  2 -
 board/orangepi/orangepi-win/boot.cmd     |  6 ---
 board/orangepi/orangepi-win/genimage.cfg | 40 --------------------
 board/orangepi/orangepi-win/readme.txt   | 37 ------------------
 configs/orangepi_win_defconfig           | 48 ------------------------
 5 files changed, 133 deletions(-)
 delete mode 100644 board/orangepi/orangepi-win/boot.cmd
 delete mode 100644 board/orangepi/orangepi-win/genimage.cfg
 delete mode 100644 board/orangepi/orangepi-win/readme.txt
 delete mode 100644 configs/orangepi_win_defconfig
DEVELOPERS +0 -2
index 9ee13d5258..ebfa0a6b30 100644
@@ -1306,7 +1306,6 @@ F:	board/olimex/a33_olinuxino/
 F:	board/olimex/a64-olinuxino/
 F:	board/orangepi/orangepi-lite2/
 F:	board/orangepi/orangepi-one-plus
-F:	board/orangepi/orangepi-win/
 F:	board/orangepi/orangepi-zero-plus2/
 F:	board/pine64/
 F:	configs/amarula_vyasa_rk3288_defconfig
@@ -1320,7 +1319,6 @@ F:	configs/olimex_a33_olinuxino_defconfig
 F:	configs/olimex_a64_olinuxino_defconfig
 F:	configs/orangepi_lite2_defconfig
 F:	configs/orangepi_one_plus_defconfig
-F:	configs/orangepi_win_defconfig
 F:	configs/orangepi_zero_plus2_defconfig
 F:	configs/pine64_defconfig
 F:	configs/pine64_sopine_defconfig
board/orangepi/orangepi-win/boot.cmd deleted +0 -6
deleted file mode 100644
index 2ddb769d6d..0000000000
@@ -1,6 +0,0 @@
-setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
-
-fatload mmc 0 $kernel_addr_r Image
-fatload mmc 0 $fdt_addr_r sun50i-a64-orangepi-win.dtb
-
-booti $kernel_addr_r - $fdt_addr_r
board/orangepi/orangepi-win/genimage.cfg deleted +0 -40
deleted file mode 100644
index 98fd1a033d..0000000000
@@ -1,40 +0,0 @@
-image boot.vfat {
-	vfat {
-		files = {
-			"Image",
-			"sun50i-a64-orangepi-win.dtb",
-			"boot.scr"
-		}
-	}
-
-	size = 64M
-}
-
-image sdcard.img {
-	hdimage {
-	}
-
-	partition spl {
-		in-partition-table = "no"
-		image = "sunxi-spl.bin"
-		offset = 8K
-	}
-
-	partition u-boot {
-		in-partition-table = "no"
-		image = "u-boot.itb"
-		offset = 40K
-		size = 1M # 1MB - 40KB
-	}
-
-	partition boot {
-		partition-type = 0xC
-		bootable = "true"
-		image = "boot.vfat"
-	}
-
-	partition rootfs {
-		partition-type = 0x83
-		image = "rootfs.ext4"
-	}
-}
board/orangepi/orangepi-win/readme.txt deleted +0 -37
deleted file mode 100644
index 93adddd86b..0000000000
@@ -1,37 +0,0 @@
-Intro
-=====
-
-This default configuration will allow you to start experimenting with the
-buildroot environment for the Orangepi Win/Win Plus. With the current configuration
-it will bring-up the board, and allow access through the serial console.
-
-Orangepi Win/Win Plus link:
-http://www.orangepi.org/OrangePiWin_WinPlus/
-
-Wiki link:
-https://openedev.amarulasolutions.com/display/ODWIKI/Orangepi+Win
-
-This configuration uses U-Boot mainline and kernel mainline.
-
-How to build
-============
-
-    $ make orangepi_win_defconfig
-    $ make
-
-Note: you will need access to the internet to download the required
-sources.
-
-How to write the SD card
-========================
-
-Once the build process is finished you will have an image called "sdcard.img"
-in the output/images/ directory.
-
-Copy the bootable "sdcard.img" onto an SD card with "dd":
-
-  $ sudo dd if=output/images/sdcard.img of=/dev/sdX
-  $ sudo sync
-
-Insert the micro SDcard in your Orangepi Win/Win Plus and power it up. The console
-is on the serial line, 115200 8N1.
configs/orangepi_win_defconfig deleted +0 -48

48 lines not on this page · raw message

Signature · 6 lines
2.37.3

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
#21 lore raw

PATCH 21/21 configs/pine64: remove defconfig

In reply to Thomas Petazzoni via buildroot

This defconfig has been failing to build for several months, with nobody stepping up to fix it. It's time to drop it.

See
https://lore.kernel.org/buildroot/20220806224338.0159e15c@windsurf/
for a notification on August 6, 2022 about the issues with this defconfig.

Fixes:

https://gitlab.com/buildroot.org/buildroot/-/jobs/3234499154

---
 DEVELOPERS                       |  2 --
 board/pine64/pine64/boot.cmd     |  6 ----
 board/pine64/pine64/genimage.cfg | 40 -------------------------
 board/pine64/pine64/readme.txt   | 38 ------------------------
 configs/pine64_defconfig         | 50 --------------------------------
 5 files changed, 136 deletions(-)
 delete mode 100644 board/pine64/pine64/boot.cmd
 delete mode 100644 board/pine64/pine64/genimage.cfg
 delete mode 100644 board/pine64/pine64/readme.txt
 delete mode 100644 configs/pine64_defconfig
DEVELOPERS +0 -2
index ebfa0a6b30..9569ee720b 100644
@@ -1307,7 +1307,6 @@ F:	board/olimex/a64-olinuxino/
 F:	board/orangepi/orangepi-lite2/
 F:	board/orangepi/orangepi-one-plus
 F:	board/orangepi/orangepi-zero-plus2/
-F:	board/pine64/
 F:	configs/amarula_vyasa_rk3288_defconfig
 F:	configs/asus_tinker_rk3288_defconfig
 F:	configs/engicam_imx6qdl_icore_defconfig
@@ -1320,7 +1319,6 @@ F:	configs/olimex_a64_olinuxino_defconfig
 F:	configs/orangepi_lite2_defconfig
 F:	configs/orangepi_one_plus_defconfig
 F:	configs/orangepi_zero_plus2_defconfig
-F:	configs/pine64_defconfig
 F:	configs/pine64_sopine_defconfig
 F:	package/python-scipy/
 F:	support/testing/tests/package/sample_python_scipy.py
board/pine64/pine64/boot.cmd deleted +0 -6
deleted file mode 100644
index 14f561044c..0000000000
@@ -1,6 +0,0 @@
-setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
-
-fatload mmc 0 $kernel_addr_r Image
-fatload mmc 0 $fdt_addr_r sun50i-a64-pine64.dtb
-
-booti $kernel_addr_r - $fdt_addr_r
board/pine64/pine64/genimage.cfg deleted +0 -40
deleted file mode 100644
index 06b4ed1056..0000000000
@@ -1,40 +0,0 @@
-image boot.vfat {
-	vfat {
-		files = {
-			"Image",
-			"sun50i-a64-pine64.dtb",
-			"boot.scr"
-		}
-	}
-
-	size = 64M
-}
-
-image sdcard.img {
-	hdimage {
-	}
-
-	partition spl {
-		in-partition-table = "no"
-		image = "sunxi-spl.bin"
-		offset = 8K
-	}
-
-	partition u-boot {
-		in-partition-table = "no"
-		image = "u-boot.itb"
-		offset = 40K
-		size = 1M # 1MB - 40KB
-	}
-
-	partition boot {
-		partition-type = 0xC
-		bootable = "true"
-		image = "boot.vfat"
-	}
-
-	partition rootfs {
-		partition-type = 0x83
-		image = "rootfs.ext4"
-	}
-}
board/pine64/pine64/readme.txt deleted +0 -38
deleted file mode 100644
index 85226fdd17..0000000000
@@ -1,38 +0,0 @@
-Intro
-=====
-
-This default configuration will allow you to start experimenting with the
-buildroot environment for the Pine64. With the current configuration
-it will bring-up the board, and allow access through the serial console.
-
-Pine64 link:
-https://www.pine64.org/?page_id=1194
-
-Wiki link:
-https://openedev.amarulasolutions.com/display/ODWIKI/Pine64
-
-This configuration uses U-Boot mainline and kernel mainline.
-
-How to build
-============
-
-    $ make pine64_defconfig
-
-    $ make
-
-Note: you will need access to the internet to download the required
-sources.
-
-How to write the SD card
-========================
-
-Once the build process is finished you will have an image called "sdcard.img"
-in the output/images/ directory.
-
-Copy the bootable "sdcard.img" onto an SD card with "dd":
-
-  $ sudo dd if=output/images/sdcard.img of=/dev/sdX
-  $ sudo sync
-
-Insert the micro SDcard in your Pine64 and power it up. The console
-is on the serial line, 115200 8N1.
configs/pine64_defconfig deleted +0 -50

50 lines not on this page · raw message

Signature · 6 lines
2.37.3

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
#22 lore raw

Re: [Buildroot] [PATCH 21/21] configs/pine64: remove defconfig

Hi,

Quoted 12 lines · Thomas Petazzoni via buildroot

This defconfig has been failing to build for several months, with nobody stepping up to fix it. It's time to drop it.

See
https://lore.kernel.org/buildroot/20220806224338.0159e15c@windsurf/
for a notification on August 6, 2022 about the issues with this defconfig.

Fixes:

https://gitlab.com/buildroot.org/buildroot/-/jobs/3234499154

I submitted a patch for this as it seems to be having the same issue as the pine64_sopine defconfig before..

Regards,
Michael

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot

#23 lore raw
In reply to Thomas Petazzoni via buildroot

Thomas, All,

On 2022-11-01 23:03 +0100, Thomas Petazzoni via buildroot spake thusly:

Quoted 11 lines

This patch series proposes to remove 21 defconfigs which have been failing to build for month. All of these defconfigs have already been listed in an e-mail sent on August 6, 2022 [0] to the relevant defconfig maintainers, and they still haven't been fixed. Close to 3 months later, it's time to remove them, with the goal of having all defconfigs building for the upcoming 2022.11 release.

I'm proposing to give one extra week (until November 7) before applying these patches, to see if some of the defconfig maintainers send patches to fix the defconfigs they are in charge of, or if anybody else steps up.

Exc ept for the pine64 defconfig which got fixed, there's been no other feedback. The week-long delay has now elapsed, so: applied to master, thanks.

Regards,
Yann E. MORIN.

Quoted 239 lines

[0] https://lore.kernel.org/buildroot/20220806224338.0159e15c@windsurf/

Thanks,

Thomas Petazzoni

Thomas Petazzoni (21):
configs/amarula_a64_relic: remove defconfig configs/arm_juno: remove defconfig configs/bananapi_m1: remove defconfig configs/bananapi_m1_plus: remove defconfig configs/bananapi_m2_plus: remove defconfig configs/bananapi_m64: remove defconfig configs/friendlyarm_nanopc_t4: remove defconfig configs/friendlyarm_nanopi_a64: remove defconfig configs/friendlyarm_nanopi_m1: remove defconfig configs/friendlyarm_nanopi_m1: remove defconfig configs/friendlyarm_nanopi_m4: remove defconfig configs/friendlyarm_nanopi_neo2: remove defconfig configs/friendlyarm_nanopi_neo4: remove defconfig configs/friendlyarm_nanopi_neo_plus2: remove defconfig configs/friendlyarm_nanopi_r1: remove defconfig configs/orangepi_pc2: remove defconfig configs/orangepi_plus: remove defconfig configs/orangepi_prime: remove defconfig configs/orangepi_rk3399: remove defconfig configs/orangepi_win: remove defconfig configs/pine64: remove defconfig

 DEVELOPERS                                    |  38 ----
 board/amarula/a64-relic/extlinux.conf         |   4 -
 board/amarula/a64-relic/genimage.cfg          |  11 --
 board/amarula/a64-relic/post-build.sh         |   4 -
 board/amarula/a64-relic/readme.txt            |  90 ----------
 .../lib/firmware/brcm/brcmfmac4330-sdio.txt   |  83 ---------
 board/arm/juno/linux-juno-defconfig           | 169 -----------------
 board/arm/juno/readme.txt                     | 134 --------------
 board/bananapi/bananapi-m1/boot.cmd           |   7 -
 board/bananapi/bananapi-m1/genimage.cfg       |  34 ----
 board/bananapi/bananapi-m1/readme.txt         |  37 ----
 board/bananapi/bananapi-m64/boot.cmd          |   6 -
 board/bananapi/bananapi-m64/genimage.cfg      |  40 -----
 board/bananapi/bananapi-m64/readme.txt        |  37 ----
 board/friendlyarm/nanopc-t4/extlinux.conf     |   4 -
 board/friendlyarm/nanopc-t4/genimage.cfg      |  39 ----
 board/friendlyarm/nanopc-t4/post-build.sh     |   5 -
 board/friendlyarm/nanopc-t4/readme.txt        |  45 -----
 board/friendlyarm/nanopi-a64/boot.cmd         |   6 -
 board/friendlyarm/nanopi-a64/genimage.cfg     |  40 -----
 board/friendlyarm/nanopi-a64/readme.txt       |  37 ----
 board/friendlyarm/nanopi-m1-plus/boot.cmd     |   8 -
 board/friendlyarm/nanopi-m1-plus/genimage.cfg |  36 ----
 board/friendlyarm/nanopi-m1-plus/readme.txt   |  29 ---
 board/friendlyarm/nanopi-m1/boot.cmd          |   8 -
 board/friendlyarm/nanopi-m1/genimage.cfg      |  37 ----
 board/friendlyarm/nanopi-m1/readme.txt        |  29 ---
 board/friendlyarm/nanopi-m4/extlinux.conf     |   4 -
 board/friendlyarm/nanopi-m4/genimage.cfg      |  39 ----
 board/friendlyarm/nanopi-m4/post-build.sh     |   5 -
 board/friendlyarm/nanopi-m4/readme.txt        |  45 -----
 .../nanopi-neo-plus2/extlinux.conf            |   4 -
 .../friendlyarm/nanopi-neo-plus2/genimage.cfg |  40 -----
 .../nanopi-neo-plus2/linux-extras.config      |  10 --
 .../nanopi-neo-plus2/post-build.sh            |   4 -
 board/friendlyarm/nanopi-neo-plus2/readme.txt |  37 ----
 ...3430-sdio.friendlyarm,nanopi-neo-plus2.txt |  53 ------
 board/friendlyarm/nanopi-neo2/boot.cmd        |   6 -
 board/friendlyarm/nanopi-neo2/genimage.cfg    |  40 -----
 board/friendlyarm/nanopi-neo2/readme.txt      |  37 ----
 board/friendlyarm/nanopi-neo4/extlinux.conf   |   4 -
 board/friendlyarm/nanopi-neo4/genimage.cfg    |  22 ---
 board/friendlyarm/nanopi-neo4/post-build.sh   |   5 -
 board/friendlyarm/nanopi-neo4/readme.txt      |  53 ------
 board/friendlyarm/nanopi-r1/boot.cmd          |   8 -
 board/friendlyarm/nanopi-r1/genimage.cfg      |  37 ----
 .../nanopi-r1/kernel/linux-extras.config      |   2 -
 .../nanopi-r1/kernel/sun8i-h3-nanopi-r1.dts   | 170 ------------------
 board/friendlyarm/nanopi-r1/readme.txt        |  29 ---
 .../nanopi-r1/uboot/nanopi_r1_defconfig       |  22 ---
 .../nanopi-r1/uboot/sun8i-h3-nanopi-r1.dts    | 102 -----------
 board/orangepi/orangepi-pc2/boot.cmd          |   6 -
 board/orangepi/orangepi-pc2/genimage.cfg      |  40 -----
 board/orangepi/orangepi-pc2/readme.txt        |  37 ----
 board/orangepi/orangepi-plus/boot.cmd         |   8 -
 board/orangepi/orangepi-plus/genimage.cfg     |  36 ----
 board/orangepi/orangepi-plus/readme.txt       |  29 ---
 board/orangepi/orangepi-prime/boot.cmd        |   6 -
 board/orangepi/orangepi-prime/genimage.cfg    |  40 -----
 board/orangepi/orangepi-prime/readme.txt      |  37 ----
 board/orangepi/orangepi-rk3399/extlinux.conf  |   4 -
 board/orangepi/orangepi-rk3399/genimage.cfg   |  38 ----
 board/orangepi/orangepi-rk3399/post-build.sh  |   5 -
 board/orangepi/orangepi-rk3399/readme.txt     |  56 ------
 board/orangepi/orangepi-win/boot.cmd          |   6 -
 board/orangepi/orangepi-win/genimage.cfg      |  40 -----
 board/orangepi/orangepi-win/readme.txt        |  37 ----
 board/pine64/pine64/boot.cmd                  |   6 -
 board/pine64/pine64/genimage.cfg              |  40 -----
 board/pine64/pine64/readme.txt                |  38 ----
 board/sinovoip/m1-plus/boot.cmd               |   5 -
 board/sinovoip/m1-plus/genimage.cfg           |  38 ----
 board/sinovoip/m1-plus/linux-wifi.fragment    |  10 --
 ...nanapi-m1-plus-Disable-OOB-IRQ-for-b.patch |  39 ----
 board/sinovoip/m1-plus/post-build.sh          |   4 -
 board/sinovoip/m1-plus/readme.txt             |  64 -------
 ...rcmfmac43362-sdio.sinovoip,bpi-m1-plus.txt |   1 -
 .../lib/firmware/brcm/brcmfmac43362-sdio.txt  |  56 ------
 board/sinovoip/m2-plus/boot.cmd               |   7 -
 board/sinovoip/m2-plus/genimage.cfg           |  34 ----
 configs/amarula_a64_relic_defconfig           |  63 -------
 configs/arm_juno_defconfig                    |  23 ---
 configs/bananapi_m1_defconfig                 |  29 ---
 configs/bananapi_m1_plus_defconfig            |  45 -----
 configs/bananapi_m2_plus_defconfig            |  30 ----
 configs/bananapi_m64_defconfig                |  50 ------
 configs/friendlyarm_nanopc_t4_defconfig       |  53 ------
 configs/friendlyarm_nanopi_a64_defconfig      |  50 ------
 configs/friendlyarm_nanopi_m1_defconfig       |  45 -----
 configs/friendlyarm_nanopi_m1_plus_defconfig  |  45 -----
 configs/friendlyarm_nanopi_m4_defconfig       |  53 ------
 configs/friendlyarm_nanopi_neo2_defconfig     |  50 ------
 configs/friendlyarm_nanopi_neo4_defconfig     |  55 ------
 .../friendlyarm_nanopi_neo_plus2_defconfig    |  62 -------
 configs/friendlyarm_nanopi_r1_defconfig       |  49 -----
 configs/orangepi_pc2_defconfig                |  50 ------
 configs/orangepi_plus_defconfig               |  44 -----
 configs/orangepi_prime_defconfig              |  50 ------
 configs/orangepi_rk3399_defconfig             |  53 ------
 configs/orangepi_win_defconfig                |  48 -----
 configs/pine64_defconfig                      |  50 ------
 101 files changed, 3559 deletions(-)
 delete mode 100644 board/amarula/a64-relic/extlinux.conf
 delete mode 100644 board/amarula/a64-relic/genimage.cfg
 delete mode 100755 board/amarula/a64-relic/post-build.sh
 delete mode 100644 board/amarula/a64-relic/readme.txt
 delete mode 100644 board/amarula/a64-relic/rootfs_overlay/lib/firmware/brcm/brcmfmac4330-sdio.txt
 delete mode 100644 board/arm/juno/linux-juno-defconfig
 delete mode 100644 board/arm/juno/readme.txt
 delete mode 100644 board/bananapi/bananapi-m1/boot.cmd
 delete mode 100644 board/bananapi/bananapi-m1/genimage.cfg
 delete mode 100644 board/bananapi/bananapi-m1/readme.txt
 delete mode 100644 board/bananapi/bananapi-m64/boot.cmd
 delete mode 100644 board/bananapi/bananapi-m64/genimage.cfg
 delete mode 100644 board/bananapi/bananapi-m64/readme.txt
 delete mode 100644 board/friendlyarm/nanopc-t4/extlinux.conf
 delete mode 100644 board/friendlyarm/nanopc-t4/genimage.cfg
 delete mode 100755 board/friendlyarm/nanopc-t4/post-build.sh
 delete mode 100644 board/friendlyarm/nanopc-t4/readme.txt
 delete mode 100644 board/friendlyarm/nanopi-a64/boot.cmd
 delete mode 100644 board/friendlyarm/nanopi-a64/genimage.cfg
 delete mode 100644 board/friendlyarm/nanopi-a64/readme.txt
 delete mode 100644 board/friendlyarm/nanopi-m1-plus/boot.cmd
 delete mode 100644 board/friendlyarm/nanopi-m1-plus/genimage.cfg
 delete mode 100644 board/friendlyarm/nanopi-m1-plus/readme.txt
 delete mode 100644 board/friendlyarm/nanopi-m1/boot.cmd
 delete mode 100644 board/friendlyarm/nanopi-m1/genimage.cfg
 delete mode 100644 board/friendlyarm/nanopi-m1/readme.txt
 delete mode 100644 board/friendlyarm/nanopi-m4/extlinux.conf
 delete mode 100644 board/friendlyarm/nanopi-m4/genimage.cfg
 delete mode 100755 board/friendlyarm/nanopi-m4/post-build.sh
 delete mode 100644 board/friendlyarm/nanopi-m4/readme.txt
 delete mode 100644 board/friendlyarm/nanopi-neo-plus2/extlinux.conf
 delete mode 100644 board/friendlyarm/nanopi-neo-plus2/genimage.cfg
 delete mode 100644 board/friendlyarm/nanopi-neo-plus2/linux-extras.config
 delete mode 100755 board/friendlyarm/nanopi-neo-plus2/post-build.sh
 delete mode 100644 board/friendlyarm/nanopi-neo-plus2/readme.txt
 delete mode 100644 board/friendlyarm/nanopi-neo-plus2/rootfs_overlay/lib/firmware/brcm/brcmfmac43430-sdio.friendlyarm,nanopi-neo-plus2.txt
 delete mode 100644 board/friendlyarm/nanopi-neo2/boot.cmd
 delete mode 100644 board/friendlyarm/nanopi-neo2/genimage.cfg
 delete mode 100644 board/friendlyarm/nanopi-neo2/readme.txt
 delete mode 100644 board/friendlyarm/nanopi-neo4/extlinux.conf
 delete mode 100644 board/friendlyarm/nanopi-neo4/genimage.cfg
 delete mode 100755 board/friendlyarm/nanopi-neo4/post-build.sh
 delete mode 100644 board/friendlyarm/nanopi-neo4/readme.txt
 delete mode 100644 board/friendlyarm/nanopi-r1/boot.cmd
 delete mode 100644 board/friendlyarm/nanopi-r1/genimage.cfg
 delete mode 100644 board/friendlyarm/nanopi-r1/kernel/linux-extras.config
 delete mode 100644 board/friendlyarm/nanopi-r1/kernel/sun8i-h3-nanopi-r1.dts
 delete mode 100644 board/friendlyarm/nanopi-r1/readme.txt
 delete mode 100644 board/friendlyarm/nanopi-r1/uboot/nanopi_r1_defconfig
 delete mode 100644 board/friendlyarm/nanopi-r1/uboot/sun8i-h3-nanopi-r1.dts
 delete mode 100644 board/orangepi/orangepi-pc2/boot.cmd
 delete mode 100644 board/orangepi/orangepi-pc2/genimage.cfg
 delete mode 100644 board/orangepi/orangepi-pc2/readme.txt
 delete mode 100644 board/orangepi/orangepi-plus/boot.cmd
 delete mode 100644 board/orangepi/orangepi-plus/genimage.cfg
 delete mode 100644 board/orangepi/orangepi-plus/readme.txt
 delete mode 100644 board/orangepi/orangepi-prime/boot.cmd
 delete mode 100644 board/orangepi/orangepi-prime/genimage.cfg
 delete mode 100644 board/orangepi/orangepi-prime/readme.txt
 delete mode 100644 board/orangepi/orangepi-rk3399/extlinux.conf
 delete mode 100644 board/orangepi/orangepi-rk3399/genimage.cfg
 delete mode 100755 board/orangepi/orangepi-rk3399/post-build.sh
 delete mode 100644 board/orangepi/orangepi-rk3399/readme.txt
 delete mode 100644 board/orangepi/orangepi-win/boot.cmd
 delete mode 100644 board/orangepi/orangepi-win/genimage.cfg
 delete mode 100644 board/orangepi/orangepi-win/readme.txt
 delete mode 100644 board/pine64/pine64/boot.cmd
 delete mode 100644 board/pine64/pine64/genimage.cfg
 delete mode 100644 board/pine64/pine64/readme.txt
 delete mode 100644 board/sinovoip/m1-plus/boot.cmd
 delete mode 100644 board/sinovoip/m1-plus/genimage.cfg
 delete mode 100644 board/sinovoip/m1-plus/linux-wifi.fragment
 delete mode 100644 board/sinovoip/m1-plus/patches/linux/0001-ARM-dts-sun7i-bananapi-m1-plus-Disable-OOB-IRQ-for-b.patch
 delete mode 100755 board/sinovoip/m1-plus/post-build.sh
 delete mode 100644 board/sinovoip/m1-plus/readme.txt
 delete mode 120000 board/sinovoip/m1-plus/rootfs_overlay/lib/firmware/brcm/brcmfmac43362-sdio.sinovoip,bpi-m1-plus.txt
 delete mode 100644 board/sinovoip/m1-plus/rootfs_overlay/lib/firmware/brcm/brcmfmac43362-sdio.txt
 delete mode 100644 board/sinovoip/m2-plus/boot.cmd
 delete mode 100644 board/sinovoip/m2-plus/genimage.cfg
 delete mode 100644 configs/amarula_a64_relic_defconfig
 delete mode 100644 configs/arm_juno_defconfig
 delete mode 100644 configs/bananapi_m1_defconfig
 delete mode 100644 configs/bananapi_m1_plus_defconfig
 delete mode 100644 configs/bananapi_m2_plus_defconfig
 delete mode 100644 configs/bananapi_m64_defconfig
 delete mode 100644 configs/friendlyarm_nanopc_t4_defconfig
 delete mode 100644 configs/friendlyarm_nanopi_a64_defconfig
 delete mode 100644 configs/friendlyarm_nanopi_m1_defconfig
 delete mode 100644 configs/friendlyarm_nanopi_m1_plus_defconfig
 delete mode 100644 configs/friendlyarm_nanopi_m4_defconfig
 delete mode 100644 configs/friendlyarm_nanopi_neo2_defconfig
 delete mode 100644 configs/friendlyarm_nanopi_neo4_defconfig
 delete mode 100644 configs/friendlyarm_nanopi_neo_plus2_defconfig
 delete mode 100644 configs/friendlyarm_nanopi_r1_defconfig
 delete mode 100644 configs/orangepi_pc2_defconfig
 delete mode 100644 configs/orangepi_plus_defconfig
 delete mode 100644 configs/orangepi_prime_defconfig
 delete mode 100644 configs/orangepi_rk3399_defconfig
 delete mode 100644 configs/orangepi_win_defconfig
 delete mode 100644 configs/pine64_defconfig
Signature · 6 lines
2.37.3

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
Signature · 10 lines
.-----------------.--------------------.------------------.--------------------.
|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 561 099 427 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
'------------------------------^-------^------------------^--------------------'
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot