mfd: max597x: Add support for max597x

new file mode 100644
index 000000000000..bf3db2484723
@@ -0,0 +1,163 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/maxim,max5970.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Regulator for MAX5970 smart switch from Maxim Integrated.
+
+maintainers:
+  - Patrick Rudolph <[email protected]>
+
+description: |
+  The smart switch provides no output regulation, but independent fault protection
+  and voltage and current sensing.
+  Programming is done through I2C bus.
+
+  Datasheets:
+    https://datasheets.maximintegrated.com/en/ds/MAX5970.pdf
+    https://datasheets.maximintegrated.com/en/ds/MAX5978.pdf
+
+properties:
+  compatible:
+    enum:
+      - maxim,max5970
+      - maxim,max5978
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  leds:
+    type: object
+    description:
+      Properties for single channel.
+
+    patternProperties:
+      "^led@[0-3]$":
+        $ref: /schemas/leds/common.yaml#
+        type: object
+
+    additionalProperties: true
+
+  vss1-supply:
+    description: Supply of the first channel.
+
+  vss2-supply:
+    description: Supply of the first channel.
+
+  "#io-channel-cells":
+    const: 1
+
+  regulators:
+    type: object
+    description:
+      Properties for single channel.
+
+    patternProperties:
+      "^(sw[0-1])$":
+        $ref: /schemas/regulator/regulator.yaml#
+        type: object
+
+      shunt-resistor-micro-ohms:
+        description: |
+          The value of curent sense resistor in microohms.
+          Must be specified for each channel.
+
+    additionalProperties: true
+
+required:
+  - compatible
+  - reg
+  - regulators
+  - vss1-supply
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - maxim,max5970
+    then:
+      properties:
+        io-channels:
+          items:
+            - description: voltage first channel
+            - description: current first channel
+            - description: voltage second channel
+            - description: current second channel
+          description: |
+            Voltage and current for first and second channel.
+      required:
+        - vss2-supply
+    else:
+      properties:
+        io-channels:
+          items:
+            - description: voltage first channel
+            - description: current first channel
+          description: |
+            Voltage and current for first channel.
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        regulator@3a {
+           compatible = "maxim,max5978";
+           reg = <0x3a>;
+           vss1-supply = <&p3v3>;
+
+           regulators {
+               sw0_ref_0: SW0 {
+                      regulator-compatible = "SW0";
+                      shunt-resistor-micro-ohms = <12000>;
+               };
+           };
+
+           leds {
+               #address-cells = <1>;
+               #size-cells = <0>;
+               led@0 {
+                   reg = <0>;
+                   label = "led0";
+                   default-state = "on";
+               };
+               led@1 {
+                   reg = <1>;
+                   label = "led1";
+                   default-state = "on";
+               };
+           };
+        };
+    };
+
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        regulator@3a {
+            compatible = "maxim,max5970";
+            reg = <0x3a>;
+            vss1-supply = <&p3v3>;
+            vss2-supply = <&p5v>;
+
+            regulators {
+                sw0_ref_1: SW0 {
+                    regulator-compatible = "SW0";
+                    shunt-resistor-micro-ohms = <12000>;
+                };
+                sw1_ref_1: SW1 {
+                    regulator-compatible = "SW1";
+                    shunt-resistor-micro-ohms = <10000>;
+                };
+            };
+        };
+    };
+...

index 8b93856de432..416fe7986b7b 100644
@@ -253,6 +253,18 @@ config MFD_MADERA_SPI
 	  Support for the Cirrus Logic Madera platform audio SoC
 	  core functionality controlled via SPI.
 
+config MFD_MAX597X
+	tristate "Maxim 597x Power Switch and Monitor"
+	depends on I2C
+	depends on OF
+	select MFD_CORE
+	select REGMAP_I2C
+	help
+	  This driver controls a Maxim 5970/5978 switch via I2C bus.
+	  The MAX5970/5978 is a smart switch with no output regulation, but
+	  fault protection and voltage and current monitoring capabilities.
+	  Also it supports upto 4 indication LEDs.
+
 config MFD_CS47L15
 	bool "Cirrus Logic CS47L15"
 	select PINCTRL_CS47L15

index 7ed3ef4a698c..819d711fa748 100644
@@ -161,6 +161,7 @@ obj-$(CONFIG_MFD_DA9063)	+= da9063.o
 obj-$(CONFIG_MFD_DA9150)	+= da9150-core.o
 
 obj-$(CONFIG_MFD_MAX14577)	+= max14577.o
+obj-$(CONFIG_MFD_MAX597X)	+= max597x.o
 obj-$(CONFIG_MFD_MAX77620)	+= max77620.o
 obj-$(CONFIG_MFD_MAX77650)	+= max77650.o
 obj-$(CONFIG_MFD_MAX77686)	+= max77686.o