Skip to contentSkip to conversation

package/wolfssl: bump to version 5.5.3

PATCH In review Fabrice Fontaine 3 participants 3 messages Nov 3, 2022 – Nov 14, 2022

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 package/wolfssl: bump to version 5.5.3

Fix for possible buffer zeroization overrun introduced at the end of v5.5.2 release cycle in GitHub pull request 5743 (#5743) and fixed in pull request 5757 (#5757). In the case where a specific memory allocation failed or a hardware fault happened there was the potential for an overrun of 0’s when masking the buffer used for (D)TLS 1.2 and lower operations. (D)TLS 1.3 only and crypto only users are not affected by the issue. This is not related in any way to recent issues reported in OpenSSL.

https://github.com/wolfSSL/wolfssl/releases/tag/v5.5.3-stable

---
 package/wolfssl/wolfssl.hash | 2 +-
 package/wolfssl/wolfssl.mk   | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)
package/wolfssl/wolfssl.hash +1 -1
index 65d77ca659..08262113a0 100644
@@ -1,5 +1,5 @@
 # Locally computed:
-sha256  49c6195462cae034efe6c86268824ba515682508a5f5199358d56a4168a82cf0  wolfssl-5.5.2.tar.gz
+sha256  fd3135b8657d09fb96a8aad16585da850b96ea420ae8ce5ac4d5fdfc614c2683  wolfssl-5.5.3.tar.gz
 
 # Hash for license files:
 sha256  8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643  COPYING
package/wolfssl/wolfssl.mk +1 -1
index d9fa72ccf4..cd3acd9411 100644
@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-WOLFSSL_VERSION = 5.5.2
+WOLFSSL_VERSION = 5.5.3
 WOLFSSL_SITE = $(call github,wolfSSL,wolfssl,v$(WOLFSSL_VERSION)-stable)
 WOLFSSL_INSTALL_STAGING = YES
 
Signature · 6 lines
2.35.1

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
#1 lore raw
Quoted 9 lines · On Thu, 3 Nov 2022 23:52:24 +0100 Fabrice Fontaine…

Fix for possible buffer zeroization overrun introduced at the end of v5.5.2 release cycle in GitHub pull request 5743 (#5743) and fixed in pull request 5757 (#5757). In the case where a specific memory allocation failed or a hardware fault happened there was the potential for an overrun of 0’s when masking the buffer used for (D)TLS 1.2 and lower operations. (D)TLS 1.3 only and crypto only users are not affected by the issue. This is not related in any way to recent issues reported in OpenSSL.

Quoted 7 lines

https://github.com/wolfSSL/wolfssl/releases/tag/v5.5.3-stable

---
 package/wolfssl/wolfssl.hash | 2 +-
 package/wolfssl/wolfssl.mk   | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

It's a version bump, but really a pure bug fix release, with very limited changes, so I decided to take it in master. Applied, thanks!

Thomas

Signature · 7 lines
Thomas Petazzoni, CTO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
#2 lore raw
In reply to Fabrice Fontaine
Quoted 11 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

"Fabrice" == Fabrice Fontaine <[email protected]> writes:

Fix for possible buffer zeroization overrun introduced at the end of v5.5.2 release cycle in GitHub pull request 5743 (#5743) and fixed in pull request 5757 (#5757). In the case where a specific memory allocation failed or a hardware fault happened there was the potential for an overrun of 0’s when masking the buffer used for (D)TLS 1.2 and lower operations. (D)TLS 1.3 only and crypto only users are not affected by the issue. This is not related in any way to recent issues reported in OpenSSL.

Quoted 3 lines

https://github.com/wolfSSL/wolfssl/releases/tag/v5.5.3-stable

Committed to 2022.08.x and 2022.02.x, thanks.

Signature · 5 lines
Bye, Peter Korsgaard
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot