mhi: pci_generic: add support for sc8280xp-crd SDX55 variant
Subsystems (2)
PATCH v2 1/1 mhi: pci_generic: add support for sc8280xp-crd SDX55 variant
The SC8280XP Compute Reference Design (CRD) has an on-PCB SDX55 modem which uses MBIM.
The exact channel configuration is not known but the Foxconn SDX55 configuration allows the modem to be used so reuse that one for now.
---
Changes in v2
- drop comment describing this variant (Mani)
drivers/bus/mhi/host/pci_generic.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/bus/mhi/host/pci_generic.c +2 -0
@@ -542,6 +542,8 @@ static const struct mhi_pci_dev_info mhi_telit_fn990_info = {static const struct pci_device_id mhi_pci_id_table[] = { {PCI_DEVICE (PCI_VENDOR_ID_QCOM ,0x0304 ), .driver_data = (kernel_ulong_t) &mhi_qcom_sdx24_info }, + {PCI_DEVICE_SUB (PCI_VENDOR_ID_QCOM ,0x0306 ,PCI_VENDOR_ID_QCOM ,0x010c ), + .driver_data = (kernel_ulong_t) &mhi_foxconn_sdx55_info },/* EM919x (sdx55), use the same vid:pid as qcom-sdx55m */ {PCI_DEVICE_SUB (PCI_VENDOR_ID_QCOM ,0x0306 ,0x18d7 ,0x0200 ), .driver_data = (kernel_ulong_t) &mhi_sierra_em919x_info },
Signature · 1 line
2.37.3
Quoted 7 lines · Johan Hovold
The SC8280XP Compute Reference Design (CRD) has an on-PCB SDX55 modem which uses MBIM.
The exact channel configuration is not known but the Foxconn SDX55 configuration allows the modem to be used so reuse that one for now.
Signed-off-by Johan Hovold <[email protected]>
Thanks,
Mani
Quoted 26 lines
---
Changes in v2
- drop comment describing this variant (Mani)drivers/bus/mhi/host/pci_generic.c | 2 ++ 1 file changed, 2 insertions(+)drivers/bus/mhi/host/pci_generic.c +2
-0@@ -542,6 +542,8 @@ static const struct mhi_pci_dev_info mhi_telit_fn990_info = {static const struct pci_device_id mhi_pci_id_table[] = { {PCI_DEVICE (PCI_VENDOR_ID_QCOM ,0x0304 ), .driver_data = (kernel_ulong_t) &mhi_qcom_sdx24_info }, + {PCI_DEVICE_SUB (PCI_VENDOR_ID_QCOM ,0x0306 ,PCI_VENDOR_ID_QCOM ,0x010c ), + .driver_data = (kernel_ulong_t) &mhi_foxconn_sdx55_info },/* EM919x (sdx55), use the same vid:pid as qcom-sdx55m */ {PCI_DEVICE_SUB (PCI_VENDOR_ID_QCOM ,0x0306 ,0x18d7 ,0x0200 ), .driver_data = (kernel_ulong_t) &mhi_sierra_em919x_info },Signature · 1 line
2.37.3
Signature · 1 line
மணிவண்ணன் சதாசிவம்
Manivannan Sadhasivam
maintainerQuoted 7 lines · Johan Hovold
The SC8280XP Compute Reference Design (CRD) has an on-PCB SDX55 modem which uses MBIM.
The exact channel configuration is not known but the Foxconn SDX55 configuration allows the modem to be used so reuse that one for now.
Signed-off-by Johan Hovold <[email protected]>
Modified the subject to the format "bus: mhi: host: pci_generic" and applied to mhi-next!
Thanks,
Mani
Quoted 26 lines
---
Changes in v2
- drop comment describing this variant (Mani)drivers/bus/mhi/host/pci_generic.c | 2 ++ 1 file changed, 2 insertions(+)drivers/bus/mhi/host/pci_generic.c +2
-0@@ -542,6 +542,8 @@ static const struct mhi_pci_dev_info mhi_telit_fn990_info = {static const struct pci_device_id mhi_pci_id_table[] = { {PCI_DEVICE (PCI_VENDOR_ID_QCOM ,0x0304 ), .driver_data = (kernel_ulong_t) &mhi_qcom_sdx24_info }, + {PCI_DEVICE_SUB (PCI_VENDOR_ID_QCOM ,0x0306 ,PCI_VENDOR_ID_QCOM ,0x010c ), + .driver_data = (kernel_ulong_t) &mhi_foxconn_sdx55_info },/* EM919x (sdx55), use the same vid:pid as qcom-sdx55m */ {PCI_DEVICE_SUB (PCI_VENDOR_ID_QCOM ,0x0306 ,0x18d7 ,0x0200 ), .driver_data = (kernel_ulong_t) &mhi_sierra_em919x_info },Signature · 1 line
2.37.3
Signature · 1 line
மணிவண்ணன் சதாசிவம்