wifi: rsi: Fix handling of 802.3 EAPOL frames sent via control port
Subsystems (3)
PATCH v3 1/1 wifi: rsi: Fix handling of 802.3 EAPOL frames sent via control port
When using wpa_supplicant v2.10, this driver is no longer able to associate with any AP and fails in the EAPOL 4-way handshake while sending the 2/4 message to the AP. The problem is not present in wpa_supplicant v2.9 or older. The problem stems from HostAP commit 144314eaa ("wpa_supplicant: Send EAPOL frames over nl80211 where available") which changes the way EAPOL frames are sent, from them being send at L2 frames to them being sent via nl80211 control port.
An EAPOL frame sent as L2 frame is passed to the WiFi driver with skb->protocol ETH_P_PAE, while EAPOL frame sent via nl80211 control port has skb->protocol set to ETH_P_802_3 . The later happens in ieee80211_tx_control_port(), where the EAPOL frame is encapsulated into 802.3 frame.
The rsi_91x driver handles ETH_P_PAE EAPOL frames as high-priority frames and sends them via highest-priority transmit queue, while the ETH_P_802_3 frames are sent as regular frames. The EAPOL 4-way handshake frames must be sent as highest-priority, otherwise the 4-way handshake times out.
Therefore, to fix this problem, inspect the ETH_P_802_3 frames in the rsi_91x driver, check the ethertype of the encapsulated frame, and in case it is ETH_P_PAE, transmit the frame via high-priority queue just like other ETH_P_PAE frames.
---
NOTE: I am really unsure about the method of finding out the exact
place of ethernet header in the encapsulated packet and then extracting the ethertype from it. Is there maybe some sort of helper function for that purpose ?
---
V2: - Turn the duplicated code into common function
V3: - Simplify the TX EAPOL detection (Johannes)
---
Cc: Amitkumar Karwar <[email protected]>
Cc: Angus Ainslie <[email protected]>
Cc: Jakub Kicinski <[email protected]>
Cc: Johannes Berg <[email protected]>
Cc: Kalle Valo <[email protected]>
Cc: Martin Fuzzey <[email protected]>
Cc: Martin Kepplinger <[email protected]>
Cc: Prameela Rani Garnepudi <[email protected]>
Cc: Sebastian Krzyszkowiak <[email protected]>
Cc: Siva Rebbagondla <[email protected]>
Cc: [email protected]
Cc: [email protected]
--- drivers/net/wireless/rsi/rsi_91x_core.c | 9 ++++++++- drivers/net/wireless/rsi/rsi_91x_hal.c | 5 ++++- drivers/net/wireless/rsi/rsi_common.h | 1 + 3 files changed, 13 insertions(+), 2 deletions(-)
drivers/net/wireless/rsi/rsi_91x_core.c +8 -1
@@ -364,6 +364,12 @@ struct ieee80211_vif *rsi_get_vif(struct rsi_hw *adapter, u8 *mac)return NULL ; } +bool rsi_is_tx_eapol (struct sk_buff *skb) +{ +return !!(IEEE80211_SKB_CB (skb)->control.flags & +IEEE80211_TX_CTRL_PORT_CTRL_PROTO ); +} +/** * rsi_core_xmit() - This function transmits the packets received from mac80211 * @common: Pointer to the driver private structure.
@@ -466,7 +472,8 @@ void rsi_core_xmit(struct rsi_common *common, struct sk_buff *skb) tid, 0); } } -if (skb->protocol ==cpu_to_be16 (ETH_P_PAE )) { + +if (rsi_is_tx_eapol (skb)) { q_num =MGMT_SOFT_Q ; skb->priority = q_num; }
drivers/net/wireless/rsi/rsi_91x_hal.c +4 -1
@@ -159,6 +159,7 @@ int rsi_prepare_data_desc(struct rsi_common *common, struct sk_buff *skb)struct rsi_data_desc *data_desc;struct rsi_xtended_desc *xtend_desc;u8 ieee80211_size =MIN_802_11_HDR_LEN ; +bool tx_eapol = false;u8 header_size;u8 vap_id =0 ;u8 dword_align_bytes;
@@ -168,6 +169,8 @@ int rsi_prepare_data_desc(struct rsi_common *common, struct sk_buff *skb) vif = info->control.vif; tx_params = (struct skb_info *)info->driver_data; + tx_eapol =rsi_is_tx_eapol (skb); + header_size =FRAME_DESC_SZ +sizeof (struct rsi_xtended_desc );if (header_size >skb_headroom (skb)) {rsi_dbg (ERR_ZONE ,"%s: Unable to send pkt\n" , __func__);
@@ -231,7 +234,7 @@ int rsi_prepare_data_desc(struct rsi_common *common, struct sk_buff *skb) } } -if (skb->protocol ==cpu_to_be16 (ETH_P_PAE )) { +if (tx_eapol) {rsi_dbg (INFO_ZONE ,"*** Tx EAPOL ***\n" ); data_desc->frame_info =cpu_to_le16 (RATE_INFO_ENABLE );
drivers/net/wireless/rsi/rsi_common.h +1 -0
@@ -83,6 +83,7 @@ u16 rsi_get_connected_channel(struct ieee80211_vif *vif);struct rsi_hw *rsi_91x_init (u16 oper_mode);void rsi_91x_deinit (struct rsi_hw *adapter);int rsi_read_pkt (struct rsi_common *common,u8 *rx_pkt,s32 rcv_pkt_len); +bool rsi_is_tx_eapol (struct sk_buff *skb);#ifdef CONFIG_PM int rsi_config_wowlan (struct rsi_hw *adapter,struct cfg80211_wowlan *wowlan);#endif
Signature · 1 line
2.35.1
Quoted 5 lines · Marek Vasut
Therefore, to fix this problem, inspect the
ETH_P_802_3frames in thersi_91xdriver, check the ethertype of the encapsulated frame, and in case it isETH_P_PAE, transmit the frame via high-priority queue just like otherETH_P_PAEframes.
This part seems wrong now.
drivers/net/wireless/rsi/rsi_91x_core.c struct ieee80211_vif *rsi_get_vif(struct rsi_hw *adapter, u8 *mac) · line 371
Quoted 5 lines
drivers/net/wireless/rsi/rsi_91x_core.c +5
-0+bool rsi_is_tx_eapol (struct sk_buff *skb) +{ +return !!(IEEE80211_SKB_CB (skb)->control.flags & +IEEE80211_TX_CTRL_PORT_CTRL_PROTO ); +}
For how trivial this is now, maybe make it an inline? Feels fairly pointless to have it as an out-of-line function to call in another file when it's a simple bit check.
You can also drop the !! since the return value is bool.
johannes
Quoted 8 lines · Johannes Berg
Quoted 5 lines · Marek Vasut
Therefore, to fix this problem, inspect the
ETH_P_802_3frames in thersi_91xdriver, check the ethertype of the encapsulated frame, and in case it isETH_P_PAE, transmit the frame via high-priority queue just like otherETH_P_PAEframes.This part seems wrong now.
OK
Quoted 9 lines
drivers/net/wireless/rsi/rsi_91x_core.c struct ieee80211_vif *rsi_get_vif(struct rsi_hw *adapter, u8 *mac) · line 371
Quoted 5 lines
drivers/net/wireless/rsi/rsi_91x_core.c +5
-0+bool rsi_is_tx_eapol (struct sk_buff *skb) +{ +return !!(IEEE80211_SKB_CB (skb)->control.flags & +IEEE80211_TX_CTRL_PORT_CTRL_PROTO ); +}For how trivial this is now, maybe make it an inline? Feels fairly pointless to have it as an out-of-line function to call in another file when it's a simple bit check.
In V2 it was suggested I deduplicate this into a separate function, since the test is done in multiple places. I would like to keep it deduplicated.
Quoted 1 line
You can also drop the !! since the return value is bool.
OK
Quoted 4 lines · Marek Vasut
In V2 it was suggested I deduplicate this into a separate function, since the test is done in multiple places. I would like to keep it deduplicated.
Well, it's now a lot simpler, so one might argue that it's not needed.
But anyway you're touching the hot-path of this driver, and making it an inline still keeps it de-duplicated, so not sure why you wouldn't just move the rsi_is_tx_eapol into the header file as static inline?
johannes
(removing Amitkumar Karwar <[email protected]> as that keeps bouncing)
Quoted 6 lines · Johannes Berg
Quoted 4 lines · Marek Vasut
In V2 it was suggested I deduplicate this into a separate function, since the test is done in multiple places. I would like to keep it deduplicated.
Quoted 6 lines
Well, it's now a lot simpler, so one might argue that it's not needed.
But anyway you're touching the hot-path of this driver, and making it an inline still keeps it de-duplicated, so not sure why you wouldn't just move the
rsi_is_tx_eapolinto the header file as static inline?
Though honestly, if we thought it was worth deduplicating a simple bit check like that, we could define an inline helper in mac80211.h. I'm not really convinced it is :)
But hey, that's not my driver, so ultimately I don't _really_ care so much.
johannes