Skip to contentSkip to conversation

net: wwan: iosm: fix invalid mux header type

PATCH Applied [email protected] 1 participant 1 message Nov 7, 2022

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

PATCH v2 3/4 net: wwan: iosm: fix invalid mux header type

From: M Chetan Kumar <[email protected]>

Data stall seen during peak DL throughput test & packets are dropped by mux layer due to invalid header type in datagram.

During initlization Mux aggregration protocol is set to default UL/DL size and TD count of Mux lite protocol. This configuration mismatch between device and driver is resulting in data stall/packet drops.

Override the UL/DL size and TD count for Mux aggregation protocol.

Fixes 1f52d7b62285 ("net: wwan: iosm: Enable M.2 7360 WWAN card support")

--
v2:
* No Change.

---
 drivers/net/wwan/iosm/iosm_ipc_imem_ops.c | 8 ++++++++
 drivers/net/wwan/iosm/iosm_ipc_mux.h      | 1 +
 2 files changed, 9 insertions(+)
drivers/net/wwan/iosm/iosm_ipc_imem_ops.c +8 -0
index b7f9237dedf7..66b90cc4c346 100644
@@ -91,6 +91,14 @@ void ipc_imem_wwan_channel_init(struct iosm_imem *ipc_imem,
 	}
 
 	ipc_chnl_cfg_get(&chnl_cfg, ipc_imem->nr_of_channels);
+
+	if (ipc_imem->mmio->mux_protocol == MUX_AGGREGATION &&
+	    ipc_imem->nr_of_channels == IPC_MEM_IP_CHL_ID_0) {
+		chnl_cfg.ul_nr_of_entries = IPC_MEM_MAX_TDS_MUX_AGGR_UL;
+		chnl_cfg.dl_nr_of_entries = IPC_MEM_MAX_TDS_MUX_AGGR_DL;
+		chnl_cfg.dl_buf_size = IPC_MEM_MAX_ADB_BUF_SIZE;
+	}
+
 	ipc_imem_channel_init(ipc_imem, IPC_CTYPE_WWAN, chnl_cfg,
 			      IRQ_MOD_OFF);
 
drivers/net/wwan/iosm/iosm_ipc_mux.h +1 -0
index cd9d74cc097f..9968bb885c1f 100644
@@ -10,6 +10,7 @@
 
 #define IPC_MEM_MAX_UL_DG_ENTRIES	100
 #define IPC_MEM_MAX_TDS_MUX_AGGR_UL	60
+#define IPC_MEM_MAX_TDS_MUX_AGGR_DL	60
 
 #define IPC_MEM_MAX_ADB_BUF_SIZE (16 * 1024)
 #define IPC_MEM_MAX_UL_ADB_BUF_SIZE IPC_MEM_MAX_ADB_BUF_SIZE
Signature · 1 line
2.34.1