AM68 SK: Add initial support
Subsystems (2)
v2 cover AM68 SK: Add initial support
From: Sinthu Raja <[email protected]>
Hi,
This series of patches add support for AM68 Starter kit(SK). AM68 SK is a low cost, small form factor board designed for TI’s J721S2/AM68 SoC.
Refer below link to J721S2/AM68 Technical Reference Manual for further details:
http://www.ti.com/lit/pdf/spruj28
Design files can be referrred from https://www.ti.com/lit/zip/SPRR463
Changes in V2:
Addressed all the review comments and the changes are captured in seperate patches.
- Updated the commit description.
- Updated the regulator nodes: fixedregulator to "regulator-"
- Updated the commit $subject to align with rest of the commits.
- Dropped the blank lines
- Changed the node names that are added with underscore("_") with "-"
Sinthu Raja (3):
dt-bindings: arm: ti: Add binding for AM68 SK
arm64: dts: ti: Add initial support for AM68 SK System on Module
arm64: dts: ti: k3-am68-sk: Add support for AM68 SK base board
.../devicetree/bindings/arm/ti/k3.yaml | 1 + arch/arm64/boot/dts/ti/Makefile | 2 + .../boot/dts/ti/k3-am68-sk-base-board.dts | 447 ++++++++++++++++++ arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi | 127 +++++ 4 files changed, 577 insertions(+) create mode 100644 arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts create mode 100644 arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi
Signature · 7 lines
2.36.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
PATCH v2 1/3 dt-bindings: arm: ti: Add binding for AM68 SK
From: Sinthu Raja <[email protected]>
AM68 Starter Kit is a low cost, small form factor board designed for TI's AM68 SoC which is optimized to provide best in class performance for industrial applications and add binding for the same.
---
Changes in V2:
*Addressed review comment
- added entry in alphabetical order.
V1:https://lore.kernel.org/linux-arm-kernel/[email protected]/
Documentation/devicetree/bindings/arm/ti/k3.yaml | 1 + 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/arm/ti/k3.yaml +1 -0
@@ -68,6 +68,7 @@ properties: - description: K3 J721s2 SoC items: - enum: + - ti,am68-sk - ti,j721s2-evm - const: ti,j721s2
Signature · 1 line
2.36.1
Re: [PATCH V2 1/3] dt-bindings: arm: ti: Add binding for AM68 SK
Quoted 8 lines · Sinthu Raja
From: Sinthu Raja <[email protected]>
AM68 Starter Kit is a low cost, small form factor board designed for TI's AM68 SoC which is optimized to provide best in class performance for industrial applications and add binding for the same.
Signed-off-by Sinthu Raja <[email protected]>---
Best regards,
Krzysztof
PATCH v2 2/3 arm64: dts: ti: Add initial support for AM68 SK System on Module
In reply to Sinthu RajaFrom: Sinthu Raja <[email protected]>
AM68 Starter Kit (SK)[1] is a low cost, small form factor board designed for TI’s AM68 SoC. TI’s AM68 SoC comprises of dual core A72, high performance vision accelerators, hardware accelerators, latest C71x DSP, high bandwidth real-time IPs for capture and display. The SoC is power optimized to provide best in class performance for industrial applications.
AM68 SK supports the following interfaces:
* 16 GB LPDDR4 RAM
* x1 Gigabit Ethernet interface
* x1 USB 3.1 Type-C port
* x2 USB 3.1 Type-A ports
* x1 PCIe M.2 M Key
* 512 Mbit OSPI flash
* x2 CSI2 Camera interface (RPi and TI Camera connector)
* 40-pin Raspberry Pi GPIO header
SK's System on Module (SoM) contains the SoC and DDR. Therefore, add DT node for the SOC and DDR on the SoM.
Schematics: https://www.ti.com/lit/zip/SPRR463
TRM: http://www.ti.com/lit/pdf/spruj28
---
Changes in V2:
Addressed review comments
- dropped the empty lines.
V1:https://lore.kernel.org/linux-arm-kernel/[email protected]/
arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi | 127 +++++++++++++++++++++ 1 file changed, 127 insertions(+) create mode 100644 arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi
arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi new file +127 -0
@@ -0,0 +1,127 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/ + */ + +/dts-v1/; + +#include "k3-j721s2.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + memory@80000000 { + device_type = "memory"; + /* 16 GB RAM */ + reg = <0x00 0x80000000 0x00 0x80000000>, + <0x08 0x80000000 0x03 0x80000000>; + }; + + /* Reserving memory regions still pending */ + reserved_memory: reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + secure_ddr: optee@9e800000 { + reg = <0x00 0x9e800000 0x00 0x01800000>; + alignment = <0x1000>; + no-map; + }; + }; +}; + +&mailbox0_cluster0 { + status = "disabled"; +}; + +&mailbox0_cluster1 { + status = "disabled"; +}; + +&mailbox0_cluster2 { + status = "disabled"; +}; + +&mailbox0_cluster3 { + status = "disabled"; +}; + +&mailbox0_cluster4 { + status = "disabled"; +}; + +&mailbox0_cluster5 { + status = "disabled"; +}; + +&mailbox0_cluster6 { + status = "disabled"; +}; + +&mailbox0_cluster7 { + status = "disabled"; +}; + +&mailbox0_cluster8 { + status = "disabled"; +}; + +&mailbox0_cluster9 { + status = "disabled"; +}; + +&mailbox0_cluster10 { + status = "disabled"; +}; + +&mailbox0_cluster11 { + status = "disabled"; +}; + +&mailbox1_cluster0 { + status = "disabled"; +}; + +&mailbox1_cluster1 { + status = "disabled"; +}; + +&mailbox1_cluster2 { + status = "disabled"; +}; + +&mailbox1_cluster3 { + status = "disabled"; +}; + +&mailbox1_cluster4 { + status = "disabled"; +}; + +&mailbox1_cluster5 { + status = "disabled"; +}; + +&mailbox1_cluster6 { + status = "disabled"; +}; + +&mailbox1_cluster7 { + status = "disabled"; +}; + +&mailbox1_cluster8 { + status = "disabled"; +}; + +&mailbox1_cluster9 { + status = "disabled"; +}; + +&mailbox1_cluster10 { + status = "disabled"; +}; + +&mailbox1_cluster11 { + status = "disabled"; +};
Signature · 7 lines
2.36.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
PATCH v2 3/3 arm64: dts: ti: k3-am68-sk: Add support for AM68 SK base board
In reply to Sinthu RajaFrom: Sinthu Raja <[email protected]>
The SK architecture comprises of baseboard and a SOM board. The AM68 Starter Kit's baseboard contains most of the actual connectors, power supply etc. The System on Module (SoM) is plugged on to the base board. Therefore, add support for peripherals brought out in the base board.
Schematics: https://www.ti.com/lit/zip/SPRR463
---
Changes in V2:
*Addressed the review comments:
- Updated the commit description.
- Updated the regulator nodes: fixedregulator to "regulator-"
- Updated the commit $subject to align with rest of the commits.
- Dropped the blank lines
- Changed the node names that are added with underscore("_") with "-"
V1: https://lore.kernel.org/linux-arm-kernel/[email protected]/
arch/arm64/boot/dts/ti/Makefile | 2 + .../boot/dts/ti/k3-am68-sk-base-board.dts | 447 ++++++++++++++++++ 2 files changed, 449 insertions(+) create mode 100644 arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
arch/arm64/boot/dts/ti/Makefile +2 -0
@@ -12,6 +12,8 @@ dtb-$(CONFIG_ARCH_K3) += k3-am6528-iot2050-basic-pg2.dtb dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced.dtb dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced-pg2.dtb +dtb-$(CONFIG_ARCH_K3) += k3-am68-sk-base-board.dtb + dtb-$(CONFIG_ARCH_K3) += k3-j721e-common-proc-board.dtb dtb-$(CONFIG_ARCH_K3) += k3-j721e-sk.dtb
arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts new file +447 -0
447 lines not on this page · raw message
Signature · 7 lines
2.36.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Re: [PATCH V2 3/3] arm64: dts: ti: k3-am68-sk: Add support for AM68 SK base board
Quoted 103 lines · Sinthu Raja
From: Sinthu Raja <[email protected]>
The SK architecture comprises of baseboard and a SOM board. The AM68 Starter Kit's baseboard contains most of the actual connectors, power supply etc. The System on Module (SoM) is plugged on to the base board. Therefore, add support for peripherals brought out in the base board.
Schematics: https://www.ti.com/lit/zip/SPRR463
Signed-off-by Sinthu Raja <[email protected]>---
Changes in V2:
*Addressed the review comments:
- Updated the commit description.
- Updated the regulator nodes: fixedregulator to "regulator-"
- Updated the commit $subject to align with rest of the commits.
- Dropped the blank lines
- Changed the node names that are added withunderscore("_")with "-"V1: https://lore.kernel.org/linux-arm-kernel/[email protected]/
arch/arm64/boot/dts/ti/Makefile | 2 + .../boot/dts/ti/k3-am68-sk-base-board.dts | 447 ++++++++++++++++++ 2 files changed, 449 insertions(+) create mode 100644 arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dtsarch/arm64/boot/dts/ti/Makefile +2
-0@@ -12,6 +12,8 @@ dtb-$(CONFIG_ARCH_K3) += k3-am6528-iot2050-basic-pg2.dtb dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced.dtb dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced-pg2.dtb +dtb-$(CONFIG_ARCH_K3) += k3-am68-sk-base-board.dtb + dtb-$(CONFIG_ARCH_K3) += k3-j721e-common-proc-board.dtb dtb-$(CONFIG_ARCH_K3) += k3-j721e-sk.dtbarch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts new file +56
-0@@ -0,0 +1,447 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/ + * + * Base Board: https://www.ti.com/lit/zip/SPRR463 + */ + +/dts-v1/; + +#include "k3-am68-sk-som.dtsi" +#include <dt-bindings/net/ti-dp83867.h> +#include <dt-bindings/phy/phy-cadence.h> +#include <dt-bindings/phy/phy.h> +#include <dt-bindings/mux/ti-serdes.h> + +/ { + compatible = "ti,am68-sk", "ti,j721s2"; + model = "Texas Instruments AM68 SK"; + + chosen { + stdout-path = "serial2:115200n8"; + }; + + aliases { + serial2 = &main_uart8; + mmc1 = &main_sdhci1; + can0 = &mcu_mcan0; + can1 = &mcu_mcan1; + can2 = &main_mcan6; + can3 = &main_mcan7; + }; + + vusb_main: regulator-vusb-main5v0 { + /* USB MAIN INPUT 5V DC */ + compatible = "regulator-fixed"; + regulator-name = "vusb-main5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + vsys_3v3: regulator-vsys3v3 { + /* Output of LM5141 */ + compatible = "regulator-fixed"; + regulator-name = "vsys_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vusb_main>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_mmc1: regulator-sd { + /* Output of TPS22918 */ + compatible = "regulator-fixed";
arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts line 66
Quoted 10 lines
arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts new file +10
-0+ regulator-name = "vdd_mmc1"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + enable-active-high; + vin-supply = <&vsys_3v3>; + gpio = <&exp1 10 GPIO_ACTIVE_HIGH>; + }; + + vdd_sd_dv: gpio-regulator-tlv71033 {
regulator-tlv... not gpio-regulator.
Node names should be generic.
https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation
Quoted 4 lines
arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts new file +4
-0+ /* Output of TLV71033 */ + compatible = "regulator-gpio"; + regulator-name = "tlv71033"; + pinctrl-names = "default";
arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts line 80
Quoted 10 lines
arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts new file +10
-0+ pinctrl-0 = <&vdd_sd_dv_pins_default>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + vin-supply = <&vsys_3v3>; + gpios = <&main_gpio0 49 GPIO_ACTIVE_HIGH>; + states = <1800000 0x0>, + <3300000 0x1>; + }; +
Best regards,
Krzysztof
Nishanth Menon
maintainerRe: [PATCH V2 3/3] arm64: dts: ti: k3-am68-sk: Add support for AM68 SK base board
In reply to Sinthu RajaQuoted 12 lines · Sinthu Raja
From: Sinthu Raja <[email protected]>
The SK architecture comprises of baseboard and a SOM board. The AM68 Starter Kit's baseboard contains most of the actual connectors, power supply etc. The System on Module (SoM) is plugged on to the base board. Therefore, add support for peripherals brought out in the base board.
Schematics: https://www.ti.com/lit/zip/SPRR463
Signed-off-by Sinthu Raja <[email protected]>---
[...]
Quoted 17 lines
+&main_i2c1 {
arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts new file +16
-0+ status = "disabled"; +}; + +&main_i2c2 { + status = "disabled"; +}; + +&main_i2c3 { + status = "disabled"; +}; + +&main_i2c4 { + status = "disabled"; +}; + +&main_i2c5 {
arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts line 331
Quoted 10 lines
arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts new file +10
-0+ status = "disabled"; +}; + +&main_i2c6 { + status = "disabled"; +}; + +&main_sdhci0 { + status = "disabled"; +};
Please revisit all of the nodes to ensure that the ones that are necessary are enabled? I think most of these are already disabled by default. We just finished doing a major cleanup.
[...]
Signature · 3 lines
Regards, Nishanth Menon Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D