Skip to contentSkip to conversation

Fix perf tools/lib includes

PATCH In review Ian Rogers 3 participants 21 messages Nov 9, 2022 – Nov 14, 2022

Subsystems (2)
lore
Share & tools
lore

Ian Rogers

author reviewer
#0 lore raw

v2 cover Fix perf tools/lib includes

The previous build would add -Itools/lib and get dependencies for libtraceevent, libsubcmd, libsymbol, libapi and libbpf meaning that overriding these libraries would change the link time dependency but the headers would erroneously come from tools/lib. Fix the build to install headers and then depend on these. To reduce exposing internal headers/APIs some clean up is performed. tools/lib/symbol has a Makefile added, while tools/lib/api and tools/lib/subcmd have install targets added. The pattern used for the dependencies in Makefile.perf is modelled on libbpf.

The problem and solution were motivated by this issue and discussion:
https://lore.kernel.org/lkml/CAEf4BzbbOHQZUAe6iWaehKCPQAf3VC=hq657buqe2_yRKxaK-A@mail.gmail.com/

v2. Fix a MANIFEST issue for the source tar ball. Add dependencies for
the installed header files so that the build doesn't overtake building these dependencies. Both issues reported by Arnaldo Carvalho de Melo <[email protected]>.

Ian Rogers (14):
tools lib api: Add install target
tools lib subcmd: Add install target
perf build: Install libsubcmd locally when building perf build: Install libapi locally when building perf build: Install libperf locally when building perf build: Install libtraceevent locally when building tools lib api: Add missing install headers tools lib perf: Add missing install headers tool lib symbol: Add Makefile/Build
perf build: Install libsymbol locally when building perf expr: Tidy hashmap dependency
perf thread_map: Reduce exposure of libperf internal API perf cpumap: Tidy libperf includes
perf build: Use tools/lib headers from install path

 tools/lib/api/Makefile                        |  52 +++++
 tools/lib/perf/Makefile                       |  10 +-
 tools/lib/subcmd/Makefile                     |  49 +++++
 tools/lib/symbol/Build                        |   1 +
 tools/lib/symbol/Makefile                     | 115 +++++++++++
 tools/perf/.gitignore                         |   7 +-
 tools/perf/MANIFEST                           |   3 +-
 tools/perf/Makefile.config                    |   2 -
 tools/perf/Makefile.perf                      | 192 ++++++++++++++----
 tools/perf/builtin-stat.c                     |   1 +
 tools/perf/builtin-trace.c                    |   4 +-
 tools/perf/tests/cpumap.c                     |   2 +-
 tools/perf/tests/expr.c                       |   1 +
 tools/perf/tests/openat-syscall.c             |   1 +
 tools/perf/tests/pmu-events.c                 |   1 +
 tools/perf/tests/thread-map.c                 |   1 +
 tools/perf/util/Build                         |   5 -
 tools/perf/util/auxtrace.h                    |   2 +-
 tools/perf/util/bpf-loader.c                  |   4 -
 tools/perf/util/bpf_counter.c                 |   2 +-
 tools/perf/util/cpumap.c                      |   1 +
 tools/perf/util/cpumap.h                      |   2 +-
 tools/perf/util/evsel.c                       |   5 +-
 tools/perf/util/evsel.h                       |   2 -
 tools/perf/util/expr.c                        |   1 +
 tools/perf/util/expr.h                        |   7 +-
 tools/perf/util/metricgroup.c                 |   1 +
 tools/perf/util/python.c                      |   6 +-
 .../scripting-engines/trace-event-python.c    |   2 +-
 tools/perf/util/stat-shadow.c                 |   1 +
 tools/perf/util/stat.c                        |   4 -
 tools/perf/util/thread_map.c                  |   1 +
 tools/perf/util/thread_map.h                  |   2 -
 33 files changed, 402 insertions(+), 88 deletions(-)
 create mode 100644 tools/lib/symbol/Build
 create mode 100644 tools/lib/symbol/Makefile
Signature · 1 line
2.38.1.431.g37b22c650d-goog
author reviewer
#1 lore raw

PATCH v2 1/14 tools lib api: Add install target

This allows libapi to be installed as a dependency.

---
 tools/lib/api/Makefile | 49 ++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 49 insertions(+)
tools/lib/api/Makefile +49 -0
index e21e1b40b525..6629d0fd0130 100644
@@ -15,6 +15,16 @@ LD ?= $(CROSS_COMPILE)ld
 
 MAKEFLAGS += --no-print-directory
 
+INSTALL = install
+
+
+# Use DESTDIR for installing into a different root directory.
+# This is useful for building a package. The program will be
+# installed in this directory as if it was the root directory.
+# Then the build tool can move it later.
+DESTDIR ?=
+DESTDIR_SQ = '$(subst ','\'',$(DESTDIR))'
+
 LIBFILE = $(OUTPUT)libapi.a
 
 CFLAGS := $(EXTRA_WARNINGS) $(EXTRA_CFLAGS)
@@ -45,10 +55,23 @@ RM = rm -f
 
 API_IN := $(OUTPUT)libapi-in.o
 
+ifeq ($(LP64), 1)
+  libdir_relative = lib64
+else
+  libdir_relative = lib
+endif
+
+prefix ?=
+libdir = $(prefix)/$(libdir_relative)
+
+# Shell quotes
+libdir_SQ = $(subst ','\'',$(libdir))
+
 all:
 
 export srctree OUTPUT CC LD CFLAGS V
 include $(srctree)/tools/build/Makefile.include
+include $(srctree)/tools/scripts/Makefile.include
 
 all: fixdep $(LIBFILE)
 
@@ -58,6 +81,32 @@ $(API_IN): FORCE
 $(LIBFILE): $(API_IN)
 	$(QUIET_AR)$(RM) $@ && $(AR) rcs $@ $(API_IN)
 
+define do_install_mkdir
+	if [ ! -d '$(DESTDIR_SQ)$1' ]; then             \
+		$(INSTALL) -d -m 755 '$(DESTDIR_SQ)$1'; \
+	fi
+endef
+
+define do_install
+	if [ ! -d '$(DESTDIR_SQ)$2' ]; then             \
+		$(INSTALL) -d -m 755 '$(DESTDIR_SQ)$2'; \
+	fi;                                             \
+	$(INSTALL) $1 $(if $3,-m $3,) '$(DESTDIR_SQ)$2'
+endef
+
+install_lib: $(LIBFILE)
+	$(call QUIET_INSTALL, $(LIBFILE)) \
+		$(call do_install_mkdir,$(libdir_SQ)); \
+		cp -fpR $(LIBFILE) $(DESTDIR)$(libdir_SQ)
+
+install_headers:
+	$(call QUIET_INSTALL, headers) \
+		$(call do_install,cpu.h,$(prefix)/include/api,644); \
+		$(call do_install,debug.h,$(prefix)/include/api,644); \
+		$(call do_install,io.h,$(prefix)/include/api,644);
+
+install: install_lib install_headers
+
 clean:
 	$(call QUIET_CLEAN, libapi) $(RM) $(LIBFILE); \
 	find $(or $(OUTPUT),.) -name \*.o -or -name \*.o.cmd -or -name \*.o.d | xargs $(RM)
Signature · 1 line
2.38.1.431.g37b22c650d-goog
author reviewer
#2 lore raw

PATCH v2 2/14 tools lib subcmd: Add install target

In reply to Ian Rogers

This allows libsubcmd to be installed as a dependency.

---
 tools/lib/subcmd/Makefile | 49 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 49 insertions(+)
tools/lib/subcmd/Makefile +49 -0
index 8f1a09cdfd17..e96566f8991c 100644
@@ -17,6 +17,15 @@ RM = rm -f
 
 MAKEFLAGS += --no-print-directory
 
+INSTALL = install
+
+# Use DESTDIR for installing into a different root directory.
+# This is useful for building a package. The program will be
+# installed in this directory as if it was the root directory.
+# Then the build tool can move it later.
+DESTDIR ?=
+DESTDIR_SQ = '$(subst ','\'',$(DESTDIR))'
+
 LIBFILE = $(OUTPUT)libsubcmd.a
 
 CFLAGS := -ggdb3 -Wall -Wextra -std=gnu99 -fPIC
@@ -48,6 +57,18 @@ CFLAGS += $(EXTRA_WARNINGS) $(EXTRA_CFLAGS)
 
 SUBCMD_IN := $(OUTPUT)libsubcmd-in.o
 
+ifeq ($(LP64), 1)
+  libdir_relative = lib64
+else
+  libdir_relative = lib
+endif
+
+prefix ?=
+libdir = $(prefix)/$(libdir_relative)
+
+# Shell quotes
+libdir_SQ = $(subst ','\'',$(libdir))
+
 all:
 
 export srctree OUTPUT CC LD CFLAGS V
@@ -61,6 +82,34 @@ $(SUBCMD_IN): FORCE
 $(LIBFILE): $(SUBCMD_IN)
 	$(QUIET_AR)$(RM) $@ && $(AR) rcs $@ $(SUBCMD_IN)
 
+define do_install_mkdir
+	if [ ! -d '$(DESTDIR_SQ)$1' ]; then             \
+		$(INSTALL) -d -m 755 '$(DESTDIR_SQ)$1'; \
+	fi
+endef
+
+define do_install
+	if [ ! -d '$(DESTDIR_SQ)$2' ]; then             \
+		$(INSTALL) -d -m 755 '$(DESTDIR_SQ)$2'; \
+	fi;                                             \
+	$(INSTALL) $1 $(if $3,-m $3,) '$(DESTDIR_SQ)$2'
+endef
+
+install_lib: $(LIBFILE)
+	$(call QUIET_INSTALL, $(LIBFILE)) \
+		$(call do_install_mkdir,$(libdir_SQ)); \
+		cp -fpR $(LIBFILE) $(DESTDIR)$(libdir_SQ)
+
+install_headers:
+	$(call QUIET_INSTALL, headers) \
+		$(call do_install,exec-cmd.h,$(prefix)/include/subcmd,644); \
+		$(call do_install,help.h,$(prefix)/include/subcmd,644); \
+		$(call do_install,pager.h,$(prefix)/include/subcmd,644); \
+		$(call do_install,parse-options.h,$(prefix)/include/subcmd,644); \
+		$(call do_install,run-command.h,$(prefix)/include/subcmd,644);
+
+install: install_lib install_headers
+
 clean:
 	$(call QUIET_CLEAN, libsubcmd) $(RM) $(LIBFILE); \
 	find $(or $(OUTPUT),.) -name \*.o -or -name \*.o.cmd -or -name \*.o.d | xargs $(RM)
Signature · 1 line
2.38.1.431.g37b22c650d-goog
author reviewer
#3 lore raw

PATCH v2 3/14 perf build: Install libsubcmd locally when building

In reply to Ian Rogers

The perf build currently has a '-Itools/lib' on the CC command line. This causes issues as the libapi, libsubcmd, libtraceevent, libbpf headers are all found via this path, making it impossible to override include behavior. Change the libsubcmd build mirroring the libbpf build, so that it is installed in a directory along with its headers. A later change will modify the include behavior.

---
 tools/perf/.gitignore    |  1 +
 tools/perf/Makefile.perf | 24 ++++++++++++++++--------
 2 files changed, 17 insertions(+), 8 deletions(-)
tools/perf/.gitignore +1 -0
index a653311d9693..626f5dd9a037 100644
@@ -39,6 +39,7 @@ pmu-events/pmu-events.c
 pmu-events/jevents
 feature/
 libbpf/
+libsubcmd/
 fixdep
 libtraceevent-dynamic-list
 Documentation/doc.dep
tools/perf/Makefile.perf +16 -8
index 67819f905611..4ec6b95a1c49 100644
@@ -244,7 +244,7 @@ else # force_fixdep
 LIB_DIR         = $(srctree)/tools/lib/api/
 TRACE_EVENT_DIR = $(srctree)/tools/lib/traceevent/
 LIBBPF_DIR      = $(srctree)/tools/lib/bpf/
-SUBCMD_DIR      = $(srctree)/tools/lib/subcmd/
+LIBSUBCMD_DIR   = $(srctree)/tools/lib/subcmd/
 LIBPERF_DIR     = $(srctree)/tools/lib/perf/
 DOC_DIR         = $(srctree)/tools/perf/Documentation/
 
@@ -294,7 +294,6 @@ strip-libs = $(filter-out -l%,$(1))
 ifneq ($(OUTPUT),)
   TE_PATH=$(OUTPUT)
   PLUGINS_PATH=$(OUTPUT)
-  SUBCMD_PATH=$(OUTPUT)
   LIBPERF_PATH=$(OUTPUT)
 ifneq ($(subdir),)
   API_PATH=$(OUTPUT)/../lib/api/
@@ -305,7 +304,6 @@ else
   TE_PATH=$(TRACE_EVENT_DIR)
   PLUGINS_PATH=$(TRACE_EVENT_DIR)plugins/
   API_PATH=$(LIB_DIR)
-  SUBCMD_PATH=$(SUBCMD_DIR)
   LIBPERF_PATH=$(LIBPERF_DIR)
 endif
 
@@ -332,7 +330,14 @@ LIBBPF_DESTDIR = $(LIBBPF_OUTPUT)
 LIBBPF_INCLUDE = $(LIBBPF_DESTDIR)/include
 LIBBPF = $(LIBBPF_OUTPUT)/libbpf.a
 
-LIBSUBCMD = $(SUBCMD_PATH)libsubcmd.a
+ifneq ($(OUTPUT),)
+  LIBSUBCMD_OUTPUT = $(abspath $(OUTPUT))/libsubcmd
+else
+  LIBSUBCMD_OUTPUT = $(CURDIR)/libsubcmd
+endif
+LIBSUBCMD_DESTDIR = $(LIBSUBCMD_OUTPUT)
+LIBSUBCMD_INCLUDE = $(LIBSUBCMD_DESTDIR)/include
+LIBSUBCMD = $(LIBSUBCMD_OUTPUT)/libsubcmd.a
 
 LIBPERF = $(LIBPERF_PATH)libperf.a
 export LIBPERF
@@ -849,11 +854,14 @@ $(LIBPERF)-clean:
 	$(call QUIET_CLEAN, libperf)
 	$(Q)$(MAKE) -C $(LIBPERF_DIR) O=$(OUTPUT) clean >/dev/null
 
-$(LIBSUBCMD): FORCE
-	$(Q)$(MAKE) -C $(SUBCMD_DIR) O=$(OUTPUT) $(OUTPUT)libsubcmd.a
+$(LIBSUBCMD): FORCE | $(LIBSUBCMD_OUTPUT)
+	$(Q)$(MAKE) -C $(LIBSUBCMD_DIR) O=$(LIBSUBCMD_OUTPUT) \
+		DESTDIR=$(LIBSUBCMD_DESTDIR) prefix= \
+		$@ install_headers
 
 $(LIBSUBCMD)-clean:
-	$(Q)$(MAKE) -C $(SUBCMD_DIR) O=$(OUTPUT) clean
+	$(call QUIET_CLEAN, libsubcmd)
+	$(Q)$(RM) -r -- $(LIBSUBCMD_OUTPUT)
 
 help:
 	@echo 'Perf make targets:'
@@ -1039,7 +1047,7 @@ SKELETONS += $(SKEL_OUT)/bperf_cgroup.skel.h $(SKEL_OUT)/func_latency.skel.h
 SKELETONS += $(SKEL_OUT)/off_cpu.skel.h $(SKEL_OUT)/lock_contention.skel.h
 SKELETONS += $(SKEL_OUT)/kwork_trace.skel.h
 
-$(SKEL_TMP_OUT) $(LIBBPF_OUTPUT):
+$(SKEL_TMP_OUT) $(LIBBPF_OUTPUT) $(LIBSUBCMD_OUTPUT):
 	$(Q)$(MKDIR) -p $@
 
 ifdef BUILD_BPF_SKEL
Signature · 1 line
2.38.1.431.g37b22c650d-goog
author reviewer
#4 lore raw

PATCH v2 4/14 perf build: Install libapi locally when building

In reply to Ian Rogers

The perf build currently has a '-Itools/lib' on the CC command line. This causes issues as the libapi, libsubcmd, libtraceevent, libbpf headers are all found via this path, making it impossible to override include behavior. Change the libapi build mirroring the libbpf and libsubcmd build, so that it is installed in a directory along with its headers. A later change will modify the include behavior.

---
 tools/perf/.gitignore    |  1 +
 tools/perf/Makefile.perf | 27 +++++++++++++++------------
 2 files changed, 16 insertions(+), 12 deletions(-)
tools/perf/.gitignore +1 -0
index 626f5dd9a037..1932848343f3 100644
@@ -38,6 +38,7 @@ trace/beauty/generated/
 pmu-events/pmu-events.c
 pmu-events/jevents
 feature/
+libapi/
 libbpf/
 libsubcmd/
 fixdep
tools/perf/Makefile.perf +15 -12
index 4ec6b95a1c49..f8c712e26a69 100644
@@ -241,7 +241,7 @@ sub-make: fixdep
 
 else # force_fixdep
 
-LIB_DIR         = $(srctree)/tools/lib/api/
+LIBAPI_DIR      = $(srctree)/tools/lib/api/
 TRACE_EVENT_DIR = $(srctree)/tools/lib/traceevent/
 LIBBPF_DIR      = $(srctree)/tools/lib/bpf/
 LIBSUBCMD_DIR   = $(srctree)/tools/lib/subcmd/
@@ -295,15 +295,9 @@ ifneq ($(OUTPUT),)
   TE_PATH=$(OUTPUT)
   PLUGINS_PATH=$(OUTPUT)
   LIBPERF_PATH=$(OUTPUT)
-ifneq ($(subdir),)
-  API_PATH=$(OUTPUT)/../lib/api/
-else
-  API_PATH=$(OUTPUT)
-endif
 else
   TE_PATH=$(TRACE_EVENT_DIR)
   PLUGINS_PATH=$(TRACE_EVENT_DIR)plugins/
-  API_PATH=$(LIB_DIR)
   LIBPERF_PATH=$(LIBPERF_DIR)
 endif
 
@@ -318,7 +312,14 @@ LIBTRACEEVENT_DYNAMIC_LIST = $(PLUGINS_PATH)libtraceevent-dynamic-list
 DYNAMIC_LIST_LDFLAGS               = -Xlinker --dynamic-list=$(LIBTRACEEVENT_DYNAMIC_LIST)
 LIBTRACEEVENT_DYNAMIC_LIST_LDFLAGS = $(if $(findstring -static,$(LDFLAGS)),,$(DYNAMIC_LIST_LDFLAGS))
 
-LIBAPI = $(API_PATH)libapi.a
+ifneq ($(OUTPUT),)
+  LIBAPI_OUTPUT = $(abspath $(OUTPUT))/libapi
+else
+  LIBAPI_OUTPUT = $(CURDIR)/libapi
+endif
+LIBAPI_DESTDIR = $(LIBAPI_OUTPUT)
+LIBAPI_INCLUDE = $(LIBAPI_DESTDIR)/include
+LIBAPI = $(LIBAPI_OUTPUT)/libapi.a
 export LIBAPI
 
 ifneq ($(OUTPUT),)
@@ -831,12 +832,14 @@ $(LIBTRACEEVENT)-clean:
 install-traceevent-plugins: libtraceevent_plugins
 	$(Q)$(MAKE) -C $(TRACE_EVENT_DIR) $(LIBTRACEEVENT_FLAGS) O=$(OUTPUT) install_plugins
 
-$(LIBAPI): FORCE
-	$(Q)$(MAKE) -C $(LIB_DIR) O=$(OUTPUT) $(OUTPUT)libapi.a
+$(LIBAPI): FORCE | $(LIBAPI_OUTPUT)
+	$(Q)$(MAKE) -C $(LIBAPI_DIR) O=$(LIBAPI_OUTPUT) \
+		DESTDIR=$(LIBAPI_DESTDIR) prefix= \
+		$@ install_headers
 
 $(LIBAPI)-clean:
 	$(call QUIET_CLEAN, libapi)
-	$(Q)$(MAKE) -C $(LIB_DIR) O=$(OUTPUT) clean >/dev/null
+	$(Q)$(RM) -r -- $(LIBAPI_OUTPUT)
 
 $(LIBBPF): FORCE | $(LIBBPF_OUTPUT)
 	$(Q)$(MAKE) -C $(LIBBPF_DIR) FEATURES_DUMP=$(FEATURE_DUMP_EXPORT) \
@@ -1047,7 +1050,7 @@ SKELETONS += $(SKEL_OUT)/bperf_cgroup.skel.h $(SKEL_OUT)/func_latency.skel.h
 SKELETONS += $(SKEL_OUT)/off_cpu.skel.h $(SKEL_OUT)/lock_contention.skel.h
 SKELETONS += $(SKEL_OUT)/kwork_trace.skel.h
 
-$(SKEL_TMP_OUT) $(LIBBPF_OUTPUT) $(LIBSUBCMD_OUTPUT):
+$(SKEL_TMP_OUT) $(LIBAPI_OUTPUT) $(LIBBPF_OUTPUT) $(LIBSUBCMD_OUTPUT):
 	$(Q)$(MKDIR) -p $@
 
 ifdef BUILD_BPF_SKEL
Signature · 1 line
2.38.1.431.g37b22c650d-goog
author reviewer
#5 lore raw

PATCH v2 5/14 perf build: Install libperf locally when building

In reply to Ian Rogers

The perf build currently has a '-Itools/lib' on the CC command line. This causes issues as the libapi, libsubcmd, libtraceevent, libbpf headers are all found via this path, making it impossible to override include behavior. Change the libperf build mirroring the libbpf, libsubcmd and libapi build, so that it is installed in a directory along with its headers. A later change will modify the include behavior.

---
 tools/perf/.gitignore    |  1 +
 tools/perf/Makefile.perf | 21 ++++++++++++++-------
 2 files changed, 15 insertions(+), 7 deletions(-)
tools/perf/.gitignore +1 -0
index 1932848343f3..43f6621ef05e 100644
@@ -40,6 +40,7 @@ pmu-events/jevents
 feature/
 libapi/
 libbpf/
+libperf/
 libsubcmd/
 fixdep
 libtraceevent-dynamic-list
tools/perf/Makefile.perf +14 -7
index f8c712e26a69..57aec5a97270 100644
@@ -294,11 +294,9 @@ strip-libs = $(filter-out -l%,$(1))
 ifneq ($(OUTPUT),)
   TE_PATH=$(OUTPUT)
   PLUGINS_PATH=$(OUTPUT)
-  LIBPERF_PATH=$(OUTPUT)
 else
   TE_PATH=$(TRACE_EVENT_DIR)
   PLUGINS_PATH=$(TRACE_EVENT_DIR)plugins/
-  LIBPERF_PATH=$(LIBPERF_DIR)
 endif
 
 LIBTRACEEVENT = $(TE_PATH)libtraceevent.a
@@ -340,7 +338,14 @@ LIBSUBCMD_DESTDIR = $(LIBSUBCMD_OUTPUT)
 LIBSUBCMD_INCLUDE = $(LIBSUBCMD_DESTDIR)/include
 LIBSUBCMD = $(LIBSUBCMD_OUTPUT)/libsubcmd.a
 
-LIBPERF = $(LIBPERF_PATH)libperf.a
+ifneq ($(OUTPUT),)
+  LIBPERF_OUTPUT = $(abspath $(OUTPUT))/libperf
+else
+  LIBPERF_OUTPUT = $(CURDIR)/libperf
+endif
+LIBPERF_DESTDIR = $(LIBPERF_OUTPUT)
+LIBPERF_INCLUDE = $(LIBPERF_DESTDIR)/include
+LIBPERF = $(LIBPERF_OUTPUT)/libperf.a
 export LIBPERF
 
 # python extension build directories
@@ -850,12 +855,14 @@ $(LIBBPF)-clean:
 	$(call QUIET_CLEAN, libbpf)
 	$(Q)$(RM) -r -- $(LIBBPF_OUTPUT)
 
-$(LIBPERF): FORCE
-	$(Q)$(MAKE) -C $(LIBPERF_DIR) EXTRA_CFLAGS="$(LIBPERF_CFLAGS)" O=$(OUTPUT) $(OUTPUT)libperf.a
+$(LIBPERF): FORCE | $(LIBPERF_OUTPUT)
+	$(Q)$(MAKE) -C $(LIBPERF_DIR) O=$(LIBPERF_OUTPUT) \
+		DESTDIR=$(LIBPERF_DESTDIR) prefix= \
+		$@ install_headers
 
 $(LIBPERF)-clean:
 	$(call QUIET_CLEAN, libperf)
-	$(Q)$(MAKE) -C $(LIBPERF_DIR) O=$(OUTPUT) clean >/dev/null
+	$(Q)$(RM) -r -- $(LIBPERF_OUTPUT)
 
 $(LIBSUBCMD): FORCE | $(LIBSUBCMD_OUTPUT)
 	$(Q)$(MAKE) -C $(LIBSUBCMD_DIR) O=$(LIBSUBCMD_OUTPUT) \
@@ -1050,7 +1057,7 @@ SKELETONS += $(SKEL_OUT)/bperf_cgroup.skel.h $(SKEL_OUT)/func_latency.skel.h
 SKELETONS += $(SKEL_OUT)/off_cpu.skel.h $(SKEL_OUT)/lock_contention.skel.h
 SKELETONS += $(SKEL_OUT)/kwork_trace.skel.h
 
-$(SKEL_TMP_OUT) $(LIBAPI_OUTPUT) $(LIBBPF_OUTPUT) $(LIBSUBCMD_OUTPUT):
+$(SKEL_TMP_OUT) $(LIBAPI_OUTPUT) $(LIBBPF_OUTPUT) $(LIBPERF_OUTPUT) $(LIBSUBCMD_OUTPUT):
 	$(Q)$(MKDIR) -p $@
 
 ifdef BUILD_BPF_SKEL
Signature · 1 line
2.38.1.431.g37b22c650d-goog
author reviewer
#6 lore raw

PATCH v2 6/14 perf build: Install libtraceevent locally when building

In reply to Ian Rogers

The perf build currently has a '-Itools/lib' on the CC command line. This causes issues as the libapi, libsubcmd, libtraceevent, libbpf headers are all found via this path, making it impossible to override include behavior. Change the libtraceevent build mirroring the libbpf, libsubcmd, libapi and libperf build, so that it is installed in a directory along with its headers. A later change will modify the include behavior.

Similarly, the plugins are now installed into libtraceevent_plugins except they have no header files.

---
 tools/perf/.gitignore    |  3 ++-
 tools/perf/Makefile.perf | 57 ++++++++++++++++++++++++++--------------
 2 files changed, 40 insertions(+), 20 deletions(-)
tools/perf/.gitignore +2 -1
index 43f6621ef05e..65b995159cf1 100644
@@ -42,6 +42,7 @@ libapi/
 libbpf/
 libperf/
 libsubcmd/
+libtraceevent/
+libtraceevent_plugins/
 fixdep
-libtraceevent-dynamic-list
 Documentation/doc.dep
tools/perf/Makefile.perf +38 -19

95 lines not on this page · raw message

Signature · 1 line
2.38.1.431.g37b22c650d-goog
author reviewer
#7 lore raw

PATCH v2 7/14 tools lib api: Add missing install headers

In reply to Ian Rogers

Headers necessary for the perf build.

---
 tools/lib/api/Makefile | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
tools/lib/api/Makefile +4 -1
index 6629d0fd0130..3e5ef1e0e890 100644
@@ -103,7 +103,10 @@ install_headers:
 	$(call QUIET_INSTALL, headers) \
 		$(call do_install,cpu.h,$(prefix)/include/api,644); \
 		$(call do_install,debug.h,$(prefix)/include/api,644); \
-		$(call do_install,io.h,$(prefix)/include/api,644);
+		$(call do_install,io.h,$(prefix)/include/api,644); \
+		$(call do_install,fd/array.h,$(prefix)/include/api/fd,644); \
+		$(call do_install,fs/fs.h,$(prefix)/include/api/fs,644);
+		$(call do_install,fs/tracing_path.h,$(prefix)/include/api/fs,644);
 
 install: install_lib install_headers
 
Signature · 1 line
2.38.1.431.g37b22c650d-goog
author reviewer
#8 lore raw

PATCH v2 8/14 tools lib perf: Add missing install headers

In reply to Ian Rogers

Headers necessary for the perf build. Note, internal headers are also installed as these are necessary for the build.

---
 tools/lib/perf/Makefile | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)
tools/lib/perf/Makefile +9 -1
index 21df023a2103..1badc0a04676 100644
@@ -189,13 +189,21 @@ install_lib: libs
 
 install_headers:
 	$(call QUIET_INSTALL, headers) \
+		$(call do_install,include/perf/bpf_perf.h,$(prefix)/include/perf,644); \
 		$(call do_install,include/perf/core.h,$(prefix)/include/perf,644); \
 		$(call do_install,include/perf/cpumap.h,$(prefix)/include/perf,644); \
 		$(call do_install,include/perf/threadmap.h,$(prefix)/include/perf,644); \
 		$(call do_install,include/perf/evlist.h,$(prefix)/include/perf,644); \
 		$(call do_install,include/perf/evsel.h,$(prefix)/include/perf,644); \
 		$(call do_install,include/perf/event.h,$(prefix)/include/perf,644); \
-		$(call do_install,include/perf/mmap.h,$(prefix)/include/perf,644);
+		$(call do_install,include/perf/mmap.h,$(prefix)/include/perf,644); \
+		$(call do_install,include/internal/cpumap.h,$(prefix)/include/internal,644); \
+		$(call do_install,include/internal/evlist.h,$(prefix)/include/internal,644); \
+		$(call do_install,include/internal/evsel.h,$(prefix)/include/internal,644); \
+		$(call do_install,include/internal/lib.h,$(prefix)/include/internal,644); \
+		$(call do_install,include/internal/mmap.h,$(prefix)/include/internal,644); \
+		$(call do_install,include/internal/threadmap.h,$(prefix)/include/internal,644); \
+		$(call do_install,include/internal/xyarray.h,$(prefix)/include/internal,644);
 
 install_pkgconfig: $(LIBPERF_PC)
 	$(call QUIET_INSTALL, $(LIBPERF_PC)) \
Signature · 1 line
2.38.1.431.g37b22c650d-goog
maintainer
#9 lore raw

Re: [PATCH v2 08/14] tools lib perf: Add missing install headers

Quoted 3 lines · Ian Rogers

Headers necessary for the perf build. Note, internal headers are also installed as these are necessary for the build.

Yeah, it's sad we are using those internal headers in perf. Ideally libperf provides callbacks to associate private data to each public data structure (e.g. evsel, evlist, etc). And external users just use public APIs only.

But that would be a major change.

Thanks,
Namhyung

Quoted 36 lines
---
 tools/lib/perf/Makefile | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)
tools/lib/perf/Makefile +9 -2
index 21df023a2103..1badc0a04676 100644
@@ -189,13 +189,21 @@ install_lib: libs
 
 install_headers:
        $(call QUIET_INSTALL, headers) \
+               $(call do_install,include/perf/bpf_perf.h,$(prefix)/include/perf,644); \
                $(call do_install,include/perf/core.h,$(prefix)/include/perf,644); \
                $(call do_install,include/perf/cpumap.h,$(prefix)/include/perf,644); \
                $(call do_install,include/perf/threadmap.h,$(prefix)/include/perf,644); \
                $(call do_install,include/perf/evlist.h,$(prefix)/include/perf,644); \
                $(call do_install,include/perf/evsel.h,$(prefix)/include/perf,644); \
                $(call do_install,include/perf/event.h,$(prefix)/include/perf,644); \
-               $(call do_install,include/perf/mmap.h,$(prefix)/include/perf,644);
+               $(call do_install,include/perf/mmap.h,$(prefix)/include/perf,644); \
+               $(call do_install,include/internal/cpumap.h,$(prefix)/include/internal,644); \
+               $(call do_install,include/internal/evlist.h,$(prefix)/include/internal,644); \
+               $(call do_install,include/internal/evsel.h,$(prefix)/include/internal,644); \
+               $(call do_install,include/internal/lib.h,$(prefix)/include/internal,644); \
+               $(call do_install,include/internal/mmap.h,$(prefix)/include/internal,644); \
+               $(call do_install,include/internal/threadmap.h,$(prefix)/include/internal,644); \
+               $(call do_install,include/internal/xyarray.h,$(prefix)/include/internal,644);
 
 install_pkgconfig: $(LIBPERF_PC)
        $(call QUIET_INSTALL, $(LIBPERF_PC)) \
--

2.38.1.431.g37b22c650d-goog

#10 lore raw

Re: [PATCH v2 08/14] tools lib perf: Add missing install headers

Em Wed, Nov 09, 2022 at 12:12:16PM -0800, Namhyung Kim escreveu:

Quoted 5 lines · Ian Rogers
Quoted 2 lines

Headers necessary for the perf build. Note, internal headers are also installed as these are necessary for the build.

Yeah, it's sad we are using those internal headers in perf.

The plan is for perf to eventually be a libperf tool, but what was done so far was make available classes and methods that were asked for by libperf users.

Completely untangling tools/perf/ from those internal bits will needs lots more work, so doing it the way Ian is doing now seems ok.

- Arnaldo

Quoted 5 lines

Ideally libperf provides callbacks to associate private data to each public data structure (e.g. evsel, evlist, etc). And external users just use public APIs only.

But that would be a major change.

maintainer
#11 lore raw

Re: [PATCH v2 08/14] tools lib perf: Add missing install headers

Hi Arnaldo,

Quoted 6 lines · Arnaldo Carvalho de Melo

Em Wed, Nov 09, 2022 at 12:12:16PM -0800, Namhyung Kim escreveu:

Quoted 3 lines · Ian Rogers
Quoted 2 lines

Headers necessary for the perf build. Note, internal headers are also installed as these are necessary for the build.

Quoted 8 lines
Quoted 1 line

Yeah, it's sad we are using those internal headers in perf.

The plan is for perf to eventually be a libperf tool, but what was done so far was make available classes and methods that were asked for by libperf users.

Completely untangling tools/perf/ from those internal bits will needs lots more work, so doing it the way Ian is doing now seems ok.

Agreed. I'm happy to see this work going on. :)

Thanks,
Namhyung

author reviewer
#12 lore raw

PATCH v2 9/14 tool lib symbol: Add Makefile/Build

In reply to Ian Rogers

Add sufficient Makefile for libsymbol to be built as a dependency and header files installed.

---
 tools/lib/symbol/Build    |   1 +
 tools/lib/symbol/Makefile | 115 ++++++++++++++++++++++++++++++++++++++
 2 files changed, 116 insertions(+)
 create mode 100644 tools/lib/symbol/Build
 create mode 100644 tools/lib/symbol/Makefile
tools/lib/symbol/Build new file +1 -0
new file mode 100644
index 000000000000..9b9a9c78d3c9
@@ -0,0 +1 @@
+libsymbol-y += kallsyms.o
tools/lib/symbol/Makefile new file +115 -0

115 lines not on this page · raw message

Signature · 1 line
2.38.1.431.g37b22c650d-goog
author reviewer
#13 lore raw

PATCH v2 10/14 perf build: Install libsymbol locally when building

In reply to Ian Rogers

The perf build currently has a '-Itools/lib' on the CC command line. This causes issues as the libapi, libsubcmd, libtraceevent, libbpf and libsymbol headers are all found via this path, making it impossible to override include behavior. Change the libsymbol build mirroring the libbpf, libsubcmd, libapi, libperf and libtraceevent build, so that it is installed in a directory along with its headers. A later change will modify the include behavior. Don't build kallsyms.o as part of util as this will lead to duplicate definitions. Add kallsym's directory to the MANIFEST rather than individual files, so that the Build and Makefile are added to a source tar ball.

---
 tools/perf/.gitignore    |  1 +
 tools/perf/MANIFEST      |  3 +--
 tools/perf/Makefile.perf | 25 ++++++++++++++++++++++---
 tools/perf/util/Build    |  5 -----
 4 files changed, 24 insertions(+), 10 deletions(-)
tools/perf/.gitignore +1 -0
index 65b995159cf1..675c03ec1f1c 100644
@@ -42,6 +42,7 @@ libapi/
 libbpf/
 libperf/
 libsubcmd/
+libsymbol/
 libtraceevent/
 libtraceevent_plugins/
 fixdep
tools/perf/MANIFEST +1 -2
index f5d72f936a6b..c8e8e05b4ff1 100644
@@ -13,8 +13,7 @@ tools/lib/ctype.c
 tools/lib/hweight.c
 tools/lib/rbtree.c
 tools/lib/string.c
-tools/lib/symbol/kallsyms.c
-tools/lib/symbol/kallsyms.h
+tools/lib/symbol
 tools/lib/find_bit.c
 tools/lib/bitmap.c
 tools/lib/list_sort.c
tools/perf/Makefile.perf +22 -3
index 6e5e3f7730b5..6c1a2a3ccc38 100644
@@ -246,6 +246,7 @@ LIBTRACEEVENT_DIR = $(srctree)/tools/lib/traceevent/
 LIBTRACEEVENT_PLUGINS_DIR = $(LIBTRACEEVENT_DIR)/plugins
 LIBBPF_DIR      = $(srctree)/tools/lib/bpf/
 LIBSUBCMD_DIR   = $(srctree)/tools/lib/subcmd/
+LIBSYMBOL_DIR   = $(srctree)/tools/lib/symbol/
 LIBPERF_DIR     = $(srctree)/tools/lib/perf/
 DOC_DIR         = $(srctree)/tools/perf/Documentation/
 
@@ -340,6 +341,15 @@ LIBSUBCMD_DESTDIR = $(LIBSUBCMD_OUTPUT)
 LIBSUBCMD_INCLUDE = $(LIBSUBCMD_DESTDIR)/include
 LIBSUBCMD = $(LIBSUBCMD_OUTPUT)/libsubcmd.a
 
+ifneq ($(OUTPUT),)
+  LIBSYMBOL_OUTPUT = $(abspath $(OUTPUT))/libsymbol
+else
+  LIBSYMBOL_OUTPUT = $(CURDIR)/libsymbol
+endif
+LIBSYMBOL_DESTDIR = $(LIBSYMBOL_OUTPUT)
+LIBSYMBOL_INCLUDE = $(LIBSYMBOL_DESTDIR)/include
+LIBSYMBOL = $(LIBSYMBOL_OUTPUT)/libsymbol.a
+
 ifneq ($(OUTPUT),)
   LIBPERF_OUTPUT = $(abspath $(OUTPUT))/libperf
 else
@@ -398,7 +408,7 @@ endif
 
 export PERL_PATH
 
-PERFLIBS = $(LIBAPI) $(LIBSUBCMD) $(LIBPERF)
+PERFLIBS = $(LIBAPI) $(LIBPERF) $(LIBSUBCMD) $(LIBSYMBOL)
 ifndef NO_LIBBPF
   ifndef LIBBPF_DYNAMIC
     PERFLIBS += $(LIBBPF)
@@ -887,6 +897,15 @@ $(LIBSUBCMD)-clean:
 	$(call QUIET_CLEAN, libsubcmd)
 	$(Q)$(RM) -r -- $(LIBSUBCMD_OUTPUT)
 
+$(LIBSYMBOL): FORCE | $(LIBSYMBOL_OUTPUT)
+	$(Q)$(MAKE) -C $(LIBSYMBOL_DIR) O=$(LIBSYMBOL_OUTPUT) \
+		DESTDIR=$(LIBSYMBOL_DESTDIR) prefix= \
+		$@ install_headers
+
+$(LIBSYMBOL)-clean:
+	$(call QUIET_CLEAN, libsymbol)
+	$(Q)$(RM) -r -- $(LIBSYMBOL_OUTPUT)
+
 help:
 	@echo 'Perf make targets:'
 	@echo '  doc		- make *all* documentation (see below)'
@@ -1071,7 +1090,7 @@ SKELETONS += $(SKEL_OUT)/bperf_cgroup.skel.h $(SKEL_OUT)/func_latency.skel.h
 SKELETONS += $(SKEL_OUT)/off_cpu.skel.h $(SKEL_OUT)/lock_contention.skel.h
 SKELETONS += $(SKEL_OUT)/kwork_trace.skel.h
 
-$(SKEL_TMP_OUT) $(LIBAPI_OUTPUT) $(LIBBPF_OUTPUT) $(LIBPERF_OUTPUT) $(LIBSUBCMD_OUTPUT):
+$(SKEL_TMP_OUT) $(LIBAPI_OUTPUT) $(LIBBPF_OUTPUT) $(LIBPERF_OUTPUT) $(LIBSUBCMD_OUTPUT) $(LIBSYMBOL_OUTPUT):
 	$(Q)$(MKDIR) -p $@
 
 ifndef LIBTRACEEVENT_DYNAMIC
@@ -1121,7 +1140,7 @@ endif # BUILD_BPF_SKEL
 bpf-skel-clean:
 	$(call QUIET_CLEAN, bpf-skel) $(RM) -r $(SKEL_TMP_OUT) $(SKELETONS)
 
-clean:: $(LIBTRACEEVENT)-clean $(LIBAPI)-clean $(LIBBPF)-clean $(LIBSUBCMD)-clean $(LIBPERF)-clean fixdep-clean python-clean bpf-skel-clean tests-coresight-targets-clean libtraceevent_plugins-clean
+clean:: $(LIBTRACEEVENT)-clean $(LIBAPI)-clean $(LIBBPF)-clean $(LIBSUBCMD)-clean $(LIBSYMBOL)-clean $(LIBPERF)-clean fixdep-clean python-clean bpf-skel-clean tests-coresight-targets-clean libtraceevent_plugins-clean
 	$(call QUIET_CLEAN, core-objs)  $(RM) $(LIBPERF_A) $(OUTPUT)perf-archive $(OUTPUT)perf-iostat $(LANG_BINDINGS)
 	$(Q)find $(or $(OUTPUT),.) -name '*.o' -delete -o -name '\.*.cmd' -delete -o -name '\.*.d' -delete
 	$(Q)$(RM) $(OUTPUT).config-detected
tools/perf/util/Build +0 -5
index 47a7db3ad0a1..ab37f588ee8b 100644
@@ -19,7 +19,6 @@ perf-y += perf_event_attr_fprintf.o
 perf-y += evswitch.o
 perf-y += find_bit.o
 perf-y += get_current_dir_name.o
-perf-y += kallsyms.o
 perf-y += levenshtein.o
 perf-y += llvm-utils.o
 perf-y += mmap.o
@@ -294,10 +293,6 @@ CFLAGS_expr.o          += -Wno-redundant-decls
 CFLAGS_header.o        += -include $(OUTPUT)PERF-VERSION-FILE
 CFLAGS_arm-spe.o       += -I$(srctree)/tools/arch/arm64/include/
 
-$(OUTPUT)util/kallsyms.o: ../lib/symbol/kallsyms.c FORCE
-	$(call rule_mkdir)
-	$(call if_changed_dep,cc_o_c)
-
 $(OUTPUT)util/argv_split.o: ../lib/argv_split.c FORCE
 	$(call rule_mkdir)
 	$(call if_changed_dep,cc_o_c)
Signature · 1 line
2.38.1.431.g37b22c650d-goog
author reviewer
#14 lore raw

PATCH v2 11/14 perf expr: Tidy hashmap dependency

In reply to Ian Rogers

hashmap.h comes from libbpf but isn't installed with its headers. Always use the header file of the code in util. Change the hashmap.h dependency in expr.h to a forward declaration, add the necessary header file includes in the C files.

---
 tools/perf/tests/expr.c       | 1 +
 tools/perf/tests/pmu-events.c | 1 +
 tools/perf/util/bpf-loader.c  | 4 ----
 tools/perf/util/evsel.c       | 4 ----
 tools/perf/util/expr.c        | 1 +
 tools/perf/util/expr.h        | 7 +------
 tools/perf/util/metricgroup.c | 1 +
 tools/perf/util/stat-shadow.c | 1 +
 tools/perf/util/stat.c        | 4 ----
 9 files changed, 6 insertions(+), 18 deletions(-)
tools/perf/tests/expr.c +1 -0
index 6512f5e22045..b6667501ebb4 100644
@@ -2,6 +2,7 @@
 #include "util/cputopo.h"
 #include "util/debug.h"
 #include "util/expr.h"
+#include "util/hashmap.h"
 #include "util/header.h"
 #include "util/smt.h"
 #include "tests.h"
tools/perf/tests/pmu-events.c +1 -0
index 5d0d3b239a68..f7b9dbbad97f 100644
@@ -12,6 +12,7 @@
 #include <perf/evlist.h>
 #include "util/evlist.h"
 #include "util/expr.h"
+#include "util/hashmap.h"
 #include "util/parse-events.h"
 #include "metricgroup.h"
 #include "stat.h"
tools/perf/util/bpf-loader.c +0 -4
index f4adeccdbbcb..b3c8174360bf 100644
@@ -27,11 +27,7 @@
 #include "util.h"
 #include "llvm-utils.h"
 #include "c++/clang-c.h"
-#ifdef HAVE_LIBBPF_SUPPORT
-#include <bpf/hashmap.h>
-#else
 #include "util/hashmap.h"
-#endif
 #include "asm/bug.h"
 
 #include <internal/xyarray.h>
tools/perf/util/evsel.c +0 -4
index cdde5b5f8ad2..2139e8b0e401 100644
@@ -46,11 +46,7 @@
 #include "string2.h"
 #include "memswap.h"
 #include "util.h"
-#ifdef HAVE_LIBBPF_SUPPORT
-#include <bpf/hashmap.h>
-#else
 #include "util/hashmap.h"
-#endif
 #include "pmu-hybrid.h"
 #include "off_cpu.h"
 #include "../perf-sys.h"
tools/perf/util/expr.c +1 -0
index aaacf514dc09..140f2acdb325 100644
@@ -11,6 +11,7 @@
 #include "expr.h"
 #include "expr-bison.h"
 #include "expr-flex.h"
+#include "util/hashmap.h"
 #include "smt.h"
 #include "tsc.h"
 #include <linux/err.h>
tools/perf/util/expr.h +1 -6
index d6c1668dc1a0..029271540fb0 100644
@@ -2,12 +2,7 @@
 #ifndef PARSE_CTX_H
 #define PARSE_CTX_H 1
 
-#ifdef HAVE_LIBBPF_SUPPORT
-#include <bpf/hashmap.h>
-#else
-#include "util/hashmap.h"
-#endif
-
+struct hashmap;
 struct metric_ref;
 
 struct expr_scanner_ctx {
tools/perf/util/metricgroup.c +1 -0
index 4c98ac29ee13..15441e9bfb73 100644
@@ -28,6 +28,7 @@
 #include "util.h"
 #include <asm/bug.h>
 #include "cgroup.h"
+#include "util/hashmap.h"
 
 struct metric_event *metricgroup__lookup(struct rblist *metric_events,
 					 struct evsel *evsel,
tools/perf/util/stat-shadow.c +1 -0
index 07b29fe272c7..9bde9224a97c 100644
@@ -14,6 +14,7 @@
 #include "units.h"
 #include <linux/zalloc.h>
 #include "iostat.h"
+#include "util/hashmap.h"
 
 /*
  * AGGR_GLOBAL: Use CPU 0
tools/perf/util/stat.c +0 -4
index 3a432a949d46..273a5b32e815 100644
@@ -14,11 +14,7 @@
 #include "evlist.h"
 #include "evsel.h"
 #include "thread_map.h"
-#ifdef HAVE_LIBBPF_SUPPORT
-#include <bpf/hashmap.h>
-#else
 #include "util/hashmap.h"
-#endif
 #include <linux/zalloc.h>
 
 void update_stats(struct stats *stats, u64 val)
Signature · 1 line
2.38.1.431.g37b22c650d-goog
author reviewer
#15 lore raw

PATCH v2 12/14 perf thread_map: Reduce exposure of libperf internal API

In reply to Ian Rogers

Remove unnecessary include of internal threadmap.h and refcount.h in thread_map.h. Switch to using public APIs when possible or including the internal header file in the C file. Fix a transitive dependency in openat-syscall.c broken by the clean up.

---
 tools/perf/builtin-stat.c                              | 1 +
 tools/perf/builtin-trace.c                             | 4 ++--
 tools/perf/tests/openat-syscall.c                      | 1 +
 tools/perf/tests/thread-map.c                          | 1 +
 tools/perf/util/bpf_counter.c                          | 2 +-
 tools/perf/util/evsel.c                                | 1 +
 tools/perf/util/python.c                               | 6 +++---
 tools/perf/util/scripting-engines/trace-event-python.c | 2 +-
 tools/perf/util/thread_map.c                           | 1 +
 tools/perf/util/thread_map.h                           | 2 --
 10 files changed, 12 insertions(+), 9 deletions(-)
tools/perf/builtin-stat.c +1 -0
index d5e1670bca20..fb2d13650e42 100644
@@ -93,6 +93,7 @@
 
 #include <linux/ctype.h>
 #include <perf/evlist.h>
+#include <internal/threadmap.h>
 
 #define DEFAULT_SEPARATOR	" "
 #define FREEZE_ON_SMI_PATH	"devices/cpu/freeze_on_smi"
tools/perf/builtin-trace.c +2 -2
index 5690c33c523b..c554dd9bcfee 100644
@@ -4093,8 +4093,8 @@ static int trace__run(struct trace *trace, int argc, const char **argv)
 	}
 
 	trace->multiple_threads = perf_thread_map__pid(evlist->core.threads, 0) == -1 ||
-				  evlist->core.threads->nr > 1 ||
-				  evlist__first(evlist)->core.attr.inherit;
+		perf_thread_map__nr(evlist->core.threads) > 1 ||
+		evlist__first(evlist)->core.attr.inherit;
 
 	/*
 	 * Now that we already used evsel->core.attr to ask the kernel to setup the
tools/perf/tests/openat-syscall.c +1 -0
index 7e05b8b5cc95..131b62271bfa 100644
@@ -7,6 +7,7 @@
 #include <sys/types.h>
 #include <sys/stat.h>
 #include <fcntl.h>
+#include <unistd.h>
 #include "thread_map.h"
 #include "evsel.h"
 #include "debug.h"
tools/perf/tests/thread-map.c +1 -0
index e413c1387fcb..74308c1368fe 100644
@@ -11,6 +11,7 @@
 #include "util/synthetic-events.h"
 #include <linux/zalloc.h>
 #include <perf/event.h>
+#include <internal/threadmap.h>
 
 struct perf_sample;
 struct perf_tool;
tools/perf/util/bpf_counter.c +1 -1
index ef1c15e4aeba..eeee899fcf34 100644
@@ -561,7 +561,7 @@ static int bperf__load(struct evsel *evsel, struct target *target)
 
 		if (filter_type == BPERF_FILTER_PID ||
 		    filter_type == BPERF_FILTER_TGID)
-			key = evsel->core.threads->map[i].pid;
+			key = perf_thread_map__pid(evsel->core.threads, i);
 		else if (filter_type == BPERF_FILTER_CPU)
 			key = evsel->core.cpus->map[i].cpu;
 		else
tools/perf/util/evsel.c +1 -0
index 2139e8b0e401..2e212ae73b9f 100644
@@ -53,6 +53,7 @@
 #include "util/parse-branch-options.h"
 #include <internal/xyarray.h>
 #include <internal/lib.h>
+#include <internal/threadmap.h>
 
 #include <linux/ctype.h>
 
tools/perf/util/python.c +3 -3
index 5be5fa2391de..b5941c74a0d6 100644
@@ -718,17 +718,17 @@ static Py_ssize_t pyrf_thread_map__length(PyObject *obj)
 {
 	struct pyrf_thread_map *pthreads = (void *)obj;
 
-	return pthreads->threads->nr;
+	return perf_thread_map__nr(pthreads->threads);
 }
 
 static PyObject *pyrf_thread_map__item(PyObject *obj, Py_ssize_t i)
 {
 	struct pyrf_thread_map *pthreads = (void *)obj;
 
-	if (i >= pthreads->threads->nr)
+	if (i >= perf_thread_map__nr(pthreads->threads))
 		return NULL;
 
-	return Py_BuildValue("i", pthreads->threads->map[i]);
+	return Py_BuildValue("i", perf_thread_map__pid(pthreads->threads, i));
 }
 
 static PySequenceMethods pyrf_thread_map__sequence_methods = {
tools/perf/util/scripting-engines/trace-event-python.c +1 -1
index 1985d1a42a22..1cf65db8f861 100644
@@ -1654,7 +1654,7 @@ static void python_process_stat(struct perf_stat_config *config,
 	struct perf_cpu_map *cpus = counter->core.cpus;
 	int cpu, thread;
 
-	for (thread = 0; thread < threads->nr; thread++) {
+	for (thread = 0; thread < perf_thread_map__nr(threads); thread++) {
 		for (cpu = 0; cpu < perf_cpu_map__nr(cpus); cpu++) {
 			process_stat(counter, perf_cpu_map__cpu(cpus, cpu),
 				     perf_thread_map__pid(threads, thread), tstamp,
tools/perf/util/thread_map.c +1 -0
index c9bfe4696943..e848579e61a8 100644
@@ -18,6 +18,7 @@
 #include "thread_map.h"
 #include "debug.h"
 #include "event.h"
+#include <internal/threadmap.h>
 
 /* Skip "." and ".." directories */
 static int filter(const struct dirent *dir)
tools/perf/util/thread_map.h +0 -2
index 3bb860a32b8e..00ec05fc1656 100644
@@ -4,8 +4,6 @@
 
 #include <sys/types.h>
 #include <stdio.h>
-#include <linux/refcount.h>
-#include <internal/threadmap.h>
 #include <perf/threadmap.h>
 
 struct perf_record_thread_map;
Signature · 1 line
2.38.1.431.g37b22c650d-goog
author reviewer
#16 lore raw

PATCH v2 13/14 perf cpumap: Tidy libperf includes

In reply to Ian Rogers

Use public API when possible, don't include internal API in header files in evsel.h. Fix any related breakages.

---
 tools/perf/tests/cpumap.c  | 2 +-
 tools/perf/util/auxtrace.h | 2 +-
 tools/perf/util/cpumap.c   | 1 +
 tools/perf/util/cpumap.h   | 2 +-
 tools/perf/util/evsel.h    | 2 --
 5 files changed, 4 insertions(+), 5 deletions(-)
tools/perf/tests/cpumap.c +1 -1
index 7c873c6ae3eb..3150fc1fed6f 100644
@@ -6,7 +6,7 @@
 #include "util/synthetic-events.h"
 #include <string.h>
 #include <linux/bitops.h>
-#include <perf/cpumap.h>
+#include <internal/cpumap.h>
 #include "debug.h"
 
 struct machine;
tools/perf/util/auxtrace.h +1 -1
index 6a0f9b98f059..2cf63d377831 100644
@@ -15,7 +15,7 @@
 #include <linux/list.h>
 #include <linux/perf_event.h>
 #include <linux/types.h>
-#include <internal/cpumap.h>
+#include <perf/cpumap.h>
 #include <asm/bitsperlong.h>
 #include <asm/barrier.h>
 
tools/perf/util/cpumap.c +1 -0
index 6e3fcf523de9..5e564974fba4 100644
@@ -12,6 +12,7 @@
 
 #include <linux/ctype.h>
 #include <linux/zalloc.h>
+#include <internal/cpumap.h>
 
 static struct perf_cpu max_cpu_num;
 static struct perf_cpu max_present_cpu_num;
tools/perf/util/cpumap.h +1 -1
index da28b3146ef9..c2f5824a3a22 100644
@@ -4,8 +4,8 @@
 
 #include <stdbool.h>
 #include <stdio.h>
-#include <internal/cpumap.h>
 #include <perf/cpumap.h>
+#include <linux/refcount.h>
 
 /** Identify where counts are aggregated, -1 implies not to aggregate. */
 struct aggr_cpu_id {
tools/perf/util/evsel.h +0 -2
index 989865e16aad..f5d9f6a351cd 100644
@@ -10,8 +10,6 @@
 #include <internal/evsel.h>
 #include <perf/evsel.h>
 #include "symbol_conf.h"
-#include <internal/cpumap.h>
-#include <perf/cpumap.h>
 
 struct bpf_object;
 struct cgroup;
Signature · 1 line
2.38.1.431.g37b22c650d-goog
author reviewer
#17 lore raw

PATCH v2 14/14 perf build: Use tools/lib headers from install path

In reply to Ian Rogers

Switch -I from tools/lib to the install path for the tools/lib libraries that are depended upon. List header files provided by libraries so that dependencies are built in the correct order.

---
 tools/perf/Makefile.config |  2 --
 tools/perf/Makefile.perf   | 46 ++++++++++++++++++++++++++++++++++++++
 2 files changed, 46 insertions(+), 2 deletions(-)
tools/perf/Makefile.config +0 -2
index a7f6c0669fae..9cc3c48f3288 100644
@@ -349,7 +349,6 @@ ifeq ($(DEBUG),0)
   endif
 endif
 
-INC_FLAGS += -I$(srctree)/tools/lib/perf/include
 INC_FLAGS += -I$(src-perf)/util/include
 INC_FLAGS += -I$(src-perf)/arch/$(SRCARCH)/include
 INC_FLAGS += -I$(srctree)/tools/include/
@@ -367,7 +366,6 @@ endif
 
 INC_FLAGS += -I$(src-perf)/util
 INC_FLAGS += -I$(src-perf)
-INC_FLAGS += -I$(srctree)/tools/lib/
 
 CORE_CFLAGS += -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE
 
tools/perf/Makefile.perf +46 -0

82 lines not on this page · raw message

Signature · 1 line
2.38.1.431.g37b22c650d-goog
maintainer Acked-by on the v2 series
#18 lore raw
In reply to Ian Rogers

Hi Ian,

Quoted 19 lines · Ian Rogers

The previous build would add -Itools/lib and get dependencies for libtraceevent, libsubcmd, libsymbol, libapi and libbpf meaning that overriding these libraries would change the link time dependency but the headers would erroneously come from tools/lib. Fix the build to install headers and then depend on these. To reduce exposing internal headers/APIs some clean up is performed. tools/lib/symbol has a Makefile added, while tools/lib/api and tools/lib/subcmd have install targets added. The pattern used for the dependencies in Makefile.perf is modelled on libbpf.

The problem and solution were motivated by this issue and discussion:
https://lore.kernel.org/lkml/CAEf4BzbbOHQZUAe6iWaehKCPQAf3VC=hq657buqe2_yRKxaK-A@mail.gmail.com/

v2. Fix a MANIFEST issue for the source tar ball. Add dependencies for
the installed header files so that the build doesn't overtake building these dependencies. Both issues reported by Arnaldo Carvalho de Melo <[email protected]>.

Quoted 15 lines

Ian Rogers (14):
tools lib api: Add install target
tools lib subcmd: Add install target
perf build: Install libsubcmd locally when building perf build: Install libapi locally when building perf build: Install libperf locally when building perf build: Install libtraceevent locally when building tools lib api: Add missing install headers tools lib perf: Add missing install headers tool lib symbol: Add Makefile/Build
perf build: Install libsymbol locally when building perf expr: Tidy hashmap dependency
perf thread_map: Reduce exposure of libperf internal API perf cpumap: Tidy libperf includes
perf build: Use tools/lib headers from install path

Thanks,
Namhyung

Quoted 41 lines
 tools/lib/api/Makefile                        |  52 +++++
 tools/lib/perf/Makefile                       |  10 +-
 tools/lib/subcmd/Makefile                     |  49 +++++
 tools/lib/symbol/Build                        |   1 +
 tools/lib/symbol/Makefile                     | 115 +++++++++++
 tools/perf/.gitignore                         |   7 +-
 tools/perf/MANIFEST                           |   3 +-
 tools/perf/Makefile.config                    |   2 -
 tools/perf/Makefile.perf                      | 192 ++++++++++++++----
 tools/perf/builtin-stat.c                     |   1 +
 tools/perf/builtin-trace.c                    |   4 +-
 tools/perf/tests/cpumap.c                     |   2 +-
 tools/perf/tests/expr.c                       |   1 +
 tools/perf/tests/openat-syscall.c             |   1 +
 tools/perf/tests/pmu-events.c                 |   1 +
 tools/perf/tests/thread-map.c                 |   1 +
 tools/perf/util/Build                         |   5 -
 tools/perf/util/auxtrace.h                    |   2 +-
 tools/perf/util/bpf-loader.c                  |   4 -
 tools/perf/util/bpf_counter.c                 |   2 +-
 tools/perf/util/cpumap.c                      |   1 +
 tools/perf/util/cpumap.h                      |   2 +-
 tools/perf/util/evsel.c                       |   5 +-
 tools/perf/util/evsel.h                       |   2 -
 tools/perf/util/expr.c                        |   1 +
 tools/perf/util/expr.h                        |   7 +-
 tools/perf/util/metricgroup.c                 |   1 +
 tools/perf/util/python.c                      |   6 +-
 .../scripting-engines/trace-event-python.c    |   2 +-
 tools/perf/util/stat-shadow.c                 |   1 +
 tools/perf/util/stat.c                        |   4 -
 tools/perf/util/thread_map.c                  |   1 +
 tools/perf/util/thread_map.h                  |   2 -
 33 files changed, 402 insertions(+), 88 deletions(-)
 create mode 100644 tools/lib/symbol/Build
 create mode 100644 tools/lib/symbol/Makefile

--
2.38.1.431.g37b22c650d-goog

#19 lore raw

Em Thu, Nov 10, 2022 at 10:10:18AM -0800, Namhyung Kim escreveu:

Quoted 38 lines

Hi Ian,

Quoted 19 lines · Ian Rogers

The previous build would add -Itools/lib and get dependencies for libtraceevent, libsubcmd, libsymbol, libapi and libbpf meaning that overriding these libraries would change the link time dependency but the headers would erroneously come from tools/lib. Fix the build to install headers and then depend on these. To reduce exposing internal headers/APIs some clean up is performed. tools/lib/symbol has a Makefile added, while tools/lib/api and tools/lib/subcmd have install targets added. The pattern used for the dependencies in Makefile.perf is modelled on libbpf.

The problem and solution were motivated by this issue and discussion:
https://lore.kernel.org/lkml/CAEf4BzbbOHQZUAe6iWaehKCPQAf3VC=hq657buqe2_yRKxaK-A@mail.gmail.com/

v2. Fix a MANIFEST issue for the source tar ball. Add dependencies for
the installed header files so that the build doesn't overtake building these dependencies. Both issues reported by Arnaldo Carvalho de Melo <[email protected]>.

Quoted 15 lines

Ian Rogers (14):
tools lib api: Add install target
tools lib subcmd: Add install target
perf build: Install libsubcmd locally when building perf build: Install libapi locally when building perf build: Install libperf locally when building perf build: Install libtraceevent locally when building tools lib api: Add missing install headers tools lib perf: Add missing install headers tool lib symbol: Add Makefile/Build
perf build: Install libsymbol locally when building perf expr: Tidy hashmap dependency
perf thread_map: Reduce exposure of libperf internal API perf cpumap: Tidy libperf includes
perf build: Use tools/lib headers from install path

Quoted 1 line

'make -C tools/perf build-test' is failing, looks like parallelization woes again:

⬢[acme@toolbox perf]$ getconf _NPROCESSORS_ONLN
32
⬢[acme@toolbox perf]$

⬢[acme@toolbox perf]$ git log --oneline -1 ; time make -C tools/perf build-test 9f22d36a1dd0297a (HEAD -> perf/core) perf build: Use tools/lib headers from install path
make: Entering directory '/var/home/acme/git/perf/tools/perf'
- tarpkg: ./tests/perf-targz-src-pkg .

                 make_static: cd . && make LDFLAGS=-static NO_PERF_READ_VDSO32=1 NO_PERF_READ_VDSOX32=1 NO_JVMTI=1 -j32  DESTDIR=/tmp/tmp.i0kUDsiQbV
              make_with_gtk2: cd . && make GTK2=1 -j32  DESTDIR=/tmp/tmp.MNcgfeG07c
cd . && make GTK2=1 -j32 DESTDIR=/tmp/tmp.MNcgfeG07c
  BUILD:   Doing 'make -j32' parallel build
  HOSTCC  fixdep.o
  HOSTLD  fixdep-in.o
  LINK    fixdep

Warning: Kernel ABI header at 'tools/arch/arm64/include/uapi/asm/perf_regs.h' differs from latest version at 'arch/arm64/include/uapi/asm/perf_regs.h' diff -u tools/arch/arm64/include/uapi/asm/perf_regs.h arch/arm64/include/uapi/asm/perf_regs.h
Warning: Kernel ABI header at 'tools/arch/arm64/include/asm/cputype.h' differs from latest version at 'arch/arm64/include/asm/cputype.h' diff -u tools/arch/arm64/include/asm/cputype.h arch/arm64/include/asm/cputype.h
Warning: Kernel ABI header at 'tools/perf/arch/powerpc/entry/syscalls/syscall.tbl' differs from latest version at 'arch/powerpc/kernel/syscalls/syscall.tbl' diff -u tools/perf/arch/powerpc/entry/syscalls/syscall.tbl arch/powerpc/kernel/syscalls/syscall.tbl

Auto-detecting system features:

...                                   dwarf: [ on  ]
...                      dwarf_getlocations: [ on  ]
...                                   glibc: [ on  ]
...                                  libbfd: [ on  ]
...                          libbfd-buildid: [ on  ]
...                                  libcap: [ on  ]
...                                  libelf: [ on  ]
...                                 libnuma: [ on  ]
...                  numa_num_possible_cpus: [ on  ]
...                                 libperl: [ on  ]
...                               libpython: [ on  ]
...                               libcrypto: [ on  ]
...                               libunwind: [ on  ]
...                      libdw-dwarf-unwind: [ on  ]
...                                    zlib: [ on  ]
...                                    lzma: [ on  ]
...                               get_cpuid: [ on  ]
...                                     bpf: [ on  ]
...                                  libaio: [ on  ]
...                                 libzstd: [ on  ]
  GEN     common-cmds.h
  CC      perf-read-vdso32
  CC      dlfilters/dlfilter-test-api-v0.o
  CC      dlfilters/dlfilter-show-cycles.o
  CC      jvmti/libjvmti.o
  CC      jvmti/jvmti_agent.o
  CC      jvmti/libstring.o
  CC      jvmti/libctype.o
  CC      ui/gtk/browser.o
  CC      ui/gtk/hists.o
  CC      ui/gtk/setup.o
  CC      ui/gtk/util.o
  GEN     pmu-events/pmu-events.c
  CC      ui/gtk/helpline.o
  LINK    dlfilters/dlfilter-show-cycles.so
  CC      ui/gtk/progress.o
  CC      ui/gtk/annotate.o
  CC      ui/gtk/zalloc.o
  LINK    dlfilters/dlfilter-test-api-v0.so
  INSTALL headers
  CC      /var/home/acme/git/perf/tools/perf/libsubcmd/exec-cmd.o
  CC      /var/home/acme/git/perf/tools/perf/libsubcmd/help.o
  CC      /var/home/acme/git/perf/tools/perf/libsubcmd/pager.o
  CC      /var/home/acme/git/perf/tools/perf/libsubcmd/parse-options.o
  CC      /var/home/acme/git/perf/tools/perf/libsubcmd/run-command.o
In file included from ui/gtk/hists.c:2:
/var/home/acme/git/perf/tools/perf/util/include/../evlist.h:9:10: fatal error: api/fd/array.h: No such file or directory
    9 | #include <api/fd/array.h>
      |          ^~~~~~~~~~~~~~~~

compilation terminated.
make[6]: *** [/var/home/acme/git/perf/tools/build/Makefile.build:97: ui/gtk/hists.o] Error 1
make[6]: *** Waiting for unfinished jobs....
CC /var/home/acme/git/perf/tools/perf/libsubcmd/sigchain.o
make -f /var/home/acme/git/perf/tools/build/Makefile.build dir=. obj=libsymbol V=1
In file included from ui/gtk/browser.c:2:
/var/home/acme/git/perf/tools/perf/util/include/../evsel.h:10:10: fatal error: internal/evsel.h: No such file or directory
10 | #include <internal/evsel.h>

      |          ^~~~~~~~~~~~~~~~~~

compilation terminated.
make[6]: *** [/var/home/acme/git/perf/tools/build/Makefile.build:97: ui/gtk/browser.o] Error 1
INSTALL headers
CC /var/home/acme/git/perf/tools/perf/libtraceevent/event-parse.o

#20 lore raw

Em Mon, Nov 14, 2022 at 05:16:57PM -0300, Arnaldo Carvalho de Melo escreveu:

Quoted 39 lines

Em Thu, Nov 10, 2022 at 10:10:18AM -0800, Namhyung Kim escreveu:

Quoted 38 lines

Hi Ian,

Quoted 34 lines · Ian Rogers

The previous build would add -Itools/lib and get dependencies for libtraceevent, libsubcmd, libsymbol, libapi and libbpf meaning that overriding these libraries would change the link time dependency but the headers would erroneously come from tools/lib. Fix the build to install headers and then depend on these. To reduce exposing internal headers/APIs some clean up is performed. tools/lib/symbol has a Makefile added, while tools/lib/api and tools/lib/subcmd have install targets added. The pattern used for the dependencies in Makefile.perf is modelled on libbpf.

The problem and solution were motivated by this issue and discussion:
https://lore.kernel.org/lkml/CAEf4BzbbOHQZUAe6iWaehKCPQAf3VC=hq657buqe2_yRKxaK-A@mail.gmail.com/

v2. Fix a MANIFEST issue for the source tar ball. Add dependencies for
the installed header files so that the build doesn't overtake building these dependencies. Both issues reported by Arnaldo Carvalho de Melo <[email protected]>.

Ian Rogers (14):
tools lib api: Add install target
tools lib subcmd: Add install target
perf build: Install libsubcmd locally when building perf build: Install libapi locally when building perf build: Install libperf locally when building perf build: Install libtraceevent locally when building tools lib api: Add missing install headers tools lib perf: Add missing install headers tool lib symbol: Add Makefile/Build
perf build: Install libsymbol locally when building perf expr: Tidy hashmap dependency
perf thread_map: Reduce exposure of libperf internal API perf cpumap: Tidy libperf includes
perf build: Use tools/lib headers from install path

Quoted 4 lines
Quoted 1 line

'make -C tools/perf build-test' is failing, looks like parallelization woes again:

It's all at the perf/tools-libs-includes branch in my tree.

- Arnaldo

Quoted 86 lines

⬢[acme@toolbox perf]$ getconf _NPROCESSORS_ONLN
32
⬢[acme@toolbox perf]$

⬢[acme@toolbox perf]$ git log --oneline -1 ; time make -C tools/perf build-test 9f22d36a1dd0297a (HEAD -> perf/core) perf build: Use tools/lib headers from install path
make: Entering directory '/var/home/acme/git/perf/tools/perf'
- tarpkg: ./tests/perf-targz-src-pkg .

                 make_static: cd . && make LDFLAGS=-static NO_PERF_READ_VDSO32=1 NO_PERF_READ_VDSOX32=1 NO_JVMTI=1 -j32  DESTDIR=/tmp/tmp.i0kUDsiQbV
              make_with_gtk2: cd . && make GTK2=1 -j32  DESTDIR=/tmp/tmp.MNcgfeG07c
cd . && make GTK2=1 -j32 DESTDIR=/tmp/tmp.MNcgfeG07c
  BUILD:   Doing 'make -j32' parallel build
  HOSTCC  fixdep.o
  HOSTLD  fixdep-in.o
  LINK    fixdep

Warning: Kernel ABI header at 'tools/arch/arm64/include/uapi/asm/perf_regs.h' differs from latest version at 'arch/arm64/include/uapi/asm/perf_regs.h' diff -u tools/arch/arm64/include/uapi/asm/perf_regs.h arch/arm64/include/uapi/asm/perf_regs.h
Warning: Kernel ABI header at 'tools/arch/arm64/include/asm/cputype.h' differs from latest version at 'arch/arm64/include/asm/cputype.h' diff -u tools/arch/arm64/include/asm/cputype.h arch/arm64/include/asm/cputype.h
Warning: Kernel ABI header at 'tools/perf/arch/powerpc/entry/syscalls/syscall.tbl' differs from latest version at 'arch/powerpc/kernel/syscalls/syscall.tbl' diff -u tools/perf/arch/powerpc/entry/syscalls/syscall.tbl arch/powerpc/kernel/syscalls/syscall.tbl

Auto-detecting system features:

...                                   dwarf: [ on  ]
...                      dwarf_getlocations: [ on  ]
...                                   glibc: [ on  ]
...                                  libbfd: [ on  ]
...                          libbfd-buildid: [ on  ]
...                                  libcap: [ on  ]
...                                  libelf: [ on  ]
...                                 libnuma: [ on  ]
...                  numa_num_possible_cpus: [ on  ]
...                                 libperl: [ on  ]
...                               libpython: [ on  ]
...                               libcrypto: [ on  ]
...                               libunwind: [ on  ]
...                      libdw-dwarf-unwind: [ on  ]
...                                    zlib: [ on  ]
...                                    lzma: [ on  ]
...                               get_cpuid: [ on  ]
...                                     bpf: [ on  ]
...                                  libaio: [ on  ]
...                                 libzstd: [ on  ]
  GEN     common-cmds.h
  CC      perf-read-vdso32
  CC      dlfilters/dlfilter-test-api-v0.o
  CC      dlfilters/dlfilter-show-cycles.o
  CC      jvmti/libjvmti.o
  CC      jvmti/jvmti_agent.o
  CC      jvmti/libstring.o
  CC      jvmti/libctype.o
  CC      ui/gtk/browser.o
  CC      ui/gtk/hists.o
  CC      ui/gtk/setup.o
  CC      ui/gtk/util.o
  GEN     pmu-events/pmu-events.c
  CC      ui/gtk/helpline.o
  LINK    dlfilters/dlfilter-show-cycles.so
  CC      ui/gtk/progress.o
  CC      ui/gtk/annotate.o
  CC      ui/gtk/zalloc.o
  LINK    dlfilters/dlfilter-test-api-v0.so
  INSTALL headers
  CC      /var/home/acme/git/perf/tools/perf/libsubcmd/exec-cmd.o
  CC      /var/home/acme/git/perf/tools/perf/libsubcmd/help.o
  CC      /var/home/acme/git/perf/tools/perf/libsubcmd/pager.o
  CC      /var/home/acme/git/perf/tools/perf/libsubcmd/parse-options.o
  CC      /var/home/acme/git/perf/tools/perf/libsubcmd/run-command.o
In file included from ui/gtk/hists.c:2:
/var/home/acme/git/perf/tools/perf/util/include/../evlist.h:9:10: fatal error: api/fd/array.h: No such file or directory
    9 | #include <api/fd/array.h>
      |          ^~~~~~~~~~~~~~~~

compilation terminated.
make[6]: *** [/var/home/acme/git/perf/tools/build/Makefile.build:97: ui/gtk/hists.o] Error 1
make[6]: *** Waiting for unfinished jobs....
CC /var/home/acme/git/perf/tools/perf/libsubcmd/sigchain.o
make -f /var/home/acme/git/perf/tools/build/Makefile.build dir=. obj=libsymbol V=1
In file included from ui/gtk/browser.c:2:
/var/home/acme/git/perf/tools/perf/util/include/../evsel.h:10:10: fatal error: internal/evsel.h: No such file or directory
10 | #include <internal/evsel.h>

      |          ^~~~~~~~~~~~~~~~~~

compilation terminated.
make[6]: *** [/var/home/acme/git/perf/tools/build/Makefile.build:97: ui/gtk/browser.o] Error 1
INSTALL headers
CC /var/home/acme/git/perf/tools/perf/libtraceevent/event-parse.o

Signature · 1 line
- Arnaldo