add adc0 flexspi lpspi to 8dxl evk board dts
Subsystems (2)
Frank Li
maintainerv2 cover add adc0 flexspi lpspi to 8dxl evk board dts
Add adc0 flexspi lpspi and adc to 8dxl evk board dts
Change from v1 to v2:
split SOC and board change to two patches.
Frank Li (6):
arm64: dts: imx8dxl: add adc0 support
arm64: dts: imx8dxl_evk: add adc0 support
arm64: dts: imx8dxl: add flexspi0 support
arm64: dts: imx8dxl_evk: add flexspi0 support
arm64: dts: imx8dxl: add lpspi support
arm64: dts: imx8dxl_evk: add lpspi0 support
.../arm64/boot/dts/freescale/imx8-ss-dma.dtsi | 164 ++++++++++++++++++ .../boot/dts/freescale/imx8-ss-lsio.dtsi | 17 +- arch/arm64/boot/dts/freescale/imx8dxl-evk.dts | 63 +++++++ .../boot/dts/freescale/imx8dxl-ss-adma.dtsi | 20 +++ .../boot/dts/freescale/imx8dxl-ss-lsio.dtsi | 5 + 5 files changed, 268 insertions(+), 1 deletion(-)
Signature · 1 line
2.34.1
Frank Li
maintainerPATCH v2 1/6 arm64: dts: imx8dxl: add adc0 support
Add adc0 and adc1 node at imx8 common dma subsystem. imx8dxl have only adc0. Change irq number for adc0.
--- .../arm64/boot/dts/freescale/imx8-ss-dma.dtsi | 52 +++++++++++++++++++ .../boot/dts/freescale/imx8dxl-ss-adma.dtsi | 4 ++ 2 files changed, 56 insertions(+)
arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi +52 -0
@@ -156,6 +156,34 @@ i2c3: i2c@5a830000 { status = "disabled"; }; + adc0: adc@5a880000 { + compatible = "nxp,imx8qxp-adc"; + reg = <0x5a880000 0x10000>; + interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gic>; + clocks = <&adc0_lpcg 0>, + <&adc0_lpcg 1>; + clock-names = "per", "ipg"; + assigned-clocks = <&clk IMX_SC_R_ADC_0 IMX_SC_PM_CLK_PER>; + assigned-clock-rates = <24000000>; + power-domains = <&pd IMX_SC_R_ADC_0>; + status = "disabled"; + }; + + adc1: adc@5a890000 { + compatible = "nxp,imx8qxp-adc"; + reg = <0x5a890000 0x10000>; + interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gic>; + clocks = <&adc1_lpcg 0>, + <&adc1_lpcg 1>; + clock-names = "per", "ipg"; + assigned-clocks = <&clk IMX_SC_R_ADC_1 IMX_SC_PM_CLK_PER>; + assigned-clock-rates = <24000000>; + power-domains = <&pd IMX_SC_R_ADC_1>; + status = "disabled"; + }; + i2c0_lpcg: clock-controller@5ac00000 { compatible = "fsl,imx8qxp-lpcg"; reg = <0x5ac00000 0x10000>;
@@ -203,4 +231,28 @@ i2c3_lpcg: clock-controller@5ac30000 { "i2c3_lpcg_ipg_clk"; power-domains = <&pd IMX_SC_R_I2C_3>; }; + + adc0_lpcg: clock-controller@5ac80000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5ac80000 0x10000>; + #clock-cells = <1>; + clocks = <&clk IMX_SC_R_ADC_0 IMX_SC_PM_CLK_PER>, + <&dma_ipg_clk>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>; + clock-output-names = "adc0_lpcg_clk", + "adc0_lpcg_ipg_clk"; + power-domains = <&pd IMX_SC_R_ADC_0>; + }; + + adc1_lpcg: clock-controller@5ac90000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5ac90000 0x10000>; + #clock-cells = <1>; + clocks = <&clk IMX_SC_R_ADC_1 IMX_SC_PM_CLK_PER>, + <&dma_ipg_clk>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>; + clock-output-names = "adc1_lpcg_clk", + "adc1_lpcg_ipg_clk"; + power-domains = <&pd IMX_SC_R_ADC_1>; + }; };
arch/arm64/boot/dts/freescale/imx8dxl-ss-adma.dtsi +4 -0
@@ -11,6 +11,10 @@ &dma_ipg_clk { clock-frequency = <160000000>; }; +&adc0 { + interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; +}; + &i2c0 { compatible = "fsl,imx8dxl-lpi2c", "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c"; interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
Signature · 1 line
2.34.1
Frank Li
maintainerPATCH v2 2/6 arm64: dts: imx8dxl_evk: add adc0 support
In reply to Frank LiEnable adc0 at imx8dxl_evk boards dts.
--- arch/arm64/boot/dts/freescale/imx8dxl-evk.dts | 12 ++++++++++++ 1 file changed, 12 insertions(+)
arch/arm64/boot/dts/freescale/imx8dxl-evk.dts +12 -0
@@ -91,6 +91,13 @@ reg_usdhc2_vmmc: regulator-3 { off-on-delay-us = <3480>; }; + reg_vref_1v8: regulator-adc-vref { + compatible = "regulator-fixed"; + regulator-name = "vref_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + mii_select: regulator-4 { compatible = "regulator-fixed"; regulator-name = "mii-select";
@@ -102,6 +109,11 @@ mii_select: regulator-4 { }; }; +&adc0 { + vref-supply = <®_vref_1v8>; + status = "okay"; +}; + &eqos { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_eqos>;
Signature · 1 line
2.34.1
Frank Li
maintainerPATCH v2 3/6 arm64: dts: imx8dxl: add flexspi0 support
In reply to Frank LiAdd flexspi0 node at common lsio subsystem.
Change flexspi0 irq number for imx8dxl.
--- arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi | 17 ++++++++++++++++- .../boot/dts/freescale/imx8dxl-ss-lsio.dtsi | 5 +++++ 2 files changed, 21 insertions(+), 1 deletion(-)
arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi +16 -1
@@ -11,7 +11,8 @@ lsio_subsys: bus@5d000000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; - ranges = <0x5d000000 0x0 0x5d000000 0x1000000>; + ranges = <0x5d000000 0x0 0x5d000000 0x1000000>, + <0x08000000 0x0 0x08000000 0x10000000>; lsio_mem_clk: clock-lsio-mem { compatible = "fixed-clock";
@@ -107,6 +108,20 @@ lsio_gpio7: gpio@5d0f0000 { power-domains = <&pd IMX_SC_R_GPIO_7>; }; + flexspi0: spi@5d120000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "nxp,imx8qxp-fspi"; + reg = <0x5d120000 0x10000>, <0x08000000 0x10000000>; + reg-names = "fspi_base", "fspi_mmap"; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX_SC_R_FSPI_0 IMX_SC_PM_CLK_PER>, + <&clk IMX_SC_R_FSPI_0 IMX_SC_PM_CLK_PER>; + clock-names = "fspi", "fspi_en"; + power-domains = <&pd IMX_SC_R_FSPI_0>; + status = "disabled"; + }; + lsio_mu0: mailbox@5d1b0000 { reg = <0x5d1b0000 0x10000>; interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
arch/arm64/boot/dts/freescale/imx8dxl-ss-lsio.dtsi +5 -0
@@ -3,6 +3,11 @@ * Copyright 2019~2020, 2022 NXP */ +&flexspi0 { + compatible = "nxp,imx8dxl-fspi"; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; +}; + &lsio_gpio0 { compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio"; interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
Signature · 1 line
2.34.1
Frank Li
maintainerPATCH v2 4/6 arm64: dts: imx8dxl_evk: add flexspi0 support
In reply to Frank LiEnable flexspi0 at imx8dxl_evk boards dts.
--- arch/arm64/boot/dts/freescale/imx8dxl-evk.dts | 36 +++++++++++++++++++ 1 file changed, 36 insertions(+)
arch/arm64/boot/dts/freescale/imx8dxl-evk.dts +36 -0
@@ -181,6 +181,23 @@ vddio1: vddio-regulator { }; }; +&flexspi0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexspi0>; + nxp,fspi-dll-slvdly = <4>; + status = "okay"; + + mt35xu512aba0: flash@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + spi-max-frequency = <133000000>; + spi-tx-bus-width = <8>; + spi-rx-bus-width = <8>; + }; +}; + &i2c2 { #address-cells = <1>; #size-cells = <0>;
@@ -386,6 +403,25 @@ IMX8DXL_ENET1_RGMII_TX_CTL_CONN_EQOS_RGMII_TX_CTL 0x06000020 >; }; + pinctrl_flexspi0: flexspi0grp { + fsl,pins = < + IMX8DXL_QSPI0A_DATA0_LSIO_QSPI0A_DATA0 0x06000021 + IMX8DXL_QSPI0A_DATA1_LSIO_QSPI0A_DATA1 0x06000021 + IMX8DXL_QSPI0A_DATA2_LSIO_QSPI0A_DATA2 0x06000021 + IMX8DXL_QSPI0A_DATA3_LSIO_QSPI0A_DATA3 0x06000021 + IMX8DXL_QSPI0A_DQS_LSIO_QSPI0A_DQS 0x06000021 + IMX8DXL_QSPI0A_SS0_B_LSIO_QSPI0A_SS0_B 0x06000021 + IMX8DXL_QSPI0A_SCLK_LSIO_QSPI0A_SCLK 0x06000021 + IMX8DXL_QSPI0B_SCLK_LSIO_QSPI0B_SCLK 0x06000021 + IMX8DXL_QSPI0B_DATA0_LSIO_QSPI0B_DATA0 0x06000021 + IMX8DXL_QSPI0B_DATA1_LSIO_QSPI0B_DATA1 0x06000021 + IMX8DXL_QSPI0B_DATA2_LSIO_QSPI0B_DATA2 0x06000021 + IMX8DXL_QSPI0B_DATA3_LSIO_QSPI0B_DATA3 0x06000021 + IMX8DXL_QSPI0B_DQS_LSIO_QSPI0B_DQS 0x06000021 + IMX8DXL_QSPI0B_SS0_B_LSIO_QSPI0B_SS0_B 0x06000021 + >; + }; + pinctrl_fec1: fec1grp { fsl,pins = < IMX8DXL_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB0_PAD 0x000014a0
Signature · 1 line
2.34.1
Frank Li
maintainerPATCH v2 5/6 arm64: dts: imx8dxl: add lpspi support
In reply to Frank LiAdd lpspi0 lpspi1 lpspi2 lpspi3 node at common dma subsystem. Change irq number for 8dxl.
--- .../arm64/boot/dts/freescale/imx8-ss-dma.dtsi | 112 ++++++++++++++++++ .../boot/dts/freescale/imx8dxl-ss-adma.dtsi | 16 +++ 2 files changed, 128 insertions(+)
arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi +112 -0
@@ -20,6 +20,70 @@ dma_ipg_clk: clock-dma-ipg { clock-output-names = "dma_ipg_clk"; }; + lpspi0: spi@5a000000 { + compatible = "fsl,imx7ulp-spi"; + reg = <0x5a000000 0x10000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gic>; + clocks = <&spi0_lpcg 0>, + <&spi0_lpcg 1>; + clock-names = "per", "ipg"; + assigned-clocks = <&clk IMX_SC_R_SPI_0 IMX_SC_PM_CLK_PER>; + assigned-clock-rates = <20000000>; + power-domains = <&pd IMX_SC_R_SPI_0>; + status = "disabled"; + }; + + lpspi1: spi@5a010000 { + compatible = "fsl,imx7ulp-spi"; + reg = <0x5a010000 0x10000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gic>; + clocks = <&spi1_lpcg 0>, + <&spi1_lpcg 1>; + clock-names = "per", "ipg"; + assigned-clocks = <&clk IMX_SC_R_SPI_1 IMX_SC_PM_CLK_PER>; + assigned-clock-rates = <60000000>; + power-domains = <&pd IMX_SC_R_SPI_1>; + status = "disabled"; + }; + + lpspi2: spi@5a020000 { + compatible = "fsl,imx7ulp-spi"; + reg = <0x5a020000 0x10000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gic>; + clocks = <&spi2_lpcg 0>, + <&spi2_lpcg 1>; + clock-names = "per", "ipg"; + assigned-clocks = <&clk IMX_SC_R_SPI_2 IMX_SC_PM_CLK_PER>; + assigned-clock-rates = <60000000>; + power-domains = <&pd IMX_SC_R_SPI_2>; + status = "disabled"; + }; + + lpspi3: spi@5a030000 { + compatible = "fsl,imx7ulp-spi"; + reg = <0x5a030000 0x10000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gic>; + clocks = <&spi3_lpcg 0>, + <&spi3_lpcg 1>; + clock-names = "per", "ipg"; + assigned-clocks = <&clk IMX_SC_R_SPI_3 IMX_SC_PM_CLK_PER>; + assigned-clock-rates = <60000000>; + power-domains = <&pd IMX_SC_R_SPI_3>; + status = "disabled"; + }; + lpuart0: serial@5a060000 { reg = <0x5a060000 0x1000>; interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
@@ -60,6 +124,54 @@ lpuart3: serial@5a090000 { status = "disabled"; }; + spi0_lpcg: clock-controller@5a400000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5a400000 0x10000>; + #clock-cells = <1>; + clocks = <&clk IMX_SC_R_SPI_0 IMX_SC_PM_CLK_PER>, + <&dma_ipg_clk>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>; + clock-output-names = "spi0_lpcg_clk", + "spi0_lpcg_ipg_clk"; + power-domains = <&pd IMX_SC_R_SPI_0>; + }; + + spi1_lpcg: clock-controller@5a410000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5a410000 0x10000>; + #clock-cells = <1>; + clocks = <&clk IMX_SC_R_SPI_1 IMX_SC_PM_CLK_PER>, + <&dma_ipg_clk>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>; + clock-output-names = "spi1_lpcg_clk", + "spi1_lpcg_ipg_clk"; + power-domains = <&pd IMX_SC_R_SPI_1>; + }; + + spi2_lpcg: clock-controller@5a420000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5a420000 0x10000>; + #clock-cells = <1>; + clocks = <&clk IMX_SC_R_SPI_2 IMX_SC_PM_CLK_PER>, + <&dma_ipg_clk>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>; + clock-output-names = "spi2_lpcg_clk", + "spi2_lpcg_ipg_clk"; + power-domains = <&pd IMX_SC_R_SPI_2>; + }; + + spi3_lpcg: clock-controller@5a430000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5a430000 0x10000>; + #clock-cells = <1>; + clocks = <&clk IMX_SC_R_SPI_3 IMX_SC_PM_CLK_PER>, + <&dma_ipg_clk>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>; + clock-output-names = "spi3_lpcg_clk", + "spi3_lpcg_ipg_clk"; + power-domains = <&pd IMX_SC_R_SPI_3>; + }; + uart0_lpcg: clock-controller@5a460000 { compatible = "fsl,imx8qxp-lpcg"; reg = <0x5a460000 0x10000>;
arch/arm64/boot/dts/freescale/imx8dxl-ss-adma.dtsi +16 -0
@@ -54,3 +54,19 @@ &lpuart3 { compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart"; interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>; }; + +&lpspi0 { + interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>; +}; + +&lpspi1 { + interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>; +}; + +&lpspi2 { + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>; +}; + +&lpspi3 { + interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; +};
Signature · 1 line
2.34.1
Frank Li
maintainerPATCH v2 6/6 arm64: dts: imx8dxl_evk: add lpspi0 support
In reply to Frank LiEnable lpspi0 at imx8dxl_evk boards dts.
--- arch/arm64/boot/dts/freescale/imx8dxl-evk.dts | 15 +++++++++++++++ 1 file changed, 15 insertions(+)
arch/arm64/boot/dts/freescale/imx8dxl-evk.dts +15 -0
@@ -359,6 +359,21 @@ &usdhc2 { status = "okay"; }; +&lpspi3 { + fsl,spi-num-chipselects = <1>; + fsl,spi-only-use-cs1-sel; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpspi3>; + pinctrl-assert-gpios = <&pca6416_1 7 GPIO_ACTIVE_HIGH>; + status = "okay"; + + spidev0: spi@0 { + reg = <0>; + compatible = "rohm,dh2228fv"; + spi-max-frequency = <30000000>; + }; +}; + &iomuxc { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hog>;
Signature · 1 line
2.34.1
Shawn Guo
AppliedQuoted 5 lines · Frank Li
Add adc0 flexspi lpspi and adc to 8dxl evk board dts
Change from v1 to v2:
split SOC and board change to two patches.
Quoted 7 lines
Frank Li (6):
arm64: dts: imx8dxl: add adc0 support
arm64: dts:imx8dxl_evk: add adc0 support
arm64: dts: imx8dxl: add flexspi0 support
arm64: dts:imx8dxl_evk: add flexspi0 support
arm64: dts: imx8dxl: add lpspi support
arm64: dts:imx8dxl_evk: add lpspi0 support
Applied all, thanks!