Skip to contentSkip to conversation

Add more RK3326 gaming handhelds

PATCH Superseded Maya Matuszczyk 4 participants 11 messages Nov 12, 2022 – Nov 14, 2022

Subsystems (2)

v3 of 4 Superseded Latest is v4 →

lore
Share & tools
lore
#0 lore raw

v3 cover Add more RK3326 gaming handhelds

This patch series adds Odroid Go Advance, Odroid Go Super(without display) and Anbernic RG351M.

RG351P uses almost the same motherboard, and I'm not sure how to handle it. RG351P DTS file would look exactly the same, aside name change.

Changes from V2:
- Fixed a typo
- Added "v3" tag, sorry!
- Added the cover letter in a way that shouldn't get swallowed by gmail this time

Changes from V1:
- Addressed Chris Morgan's comments
- Added RG351M
- Added RG351M and Odroid Go Super

_______________________________________________
Linux-rockchip mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-rockchip

#1 lore raw

PATCH v3 1/5 arm64: dts: rockchip: Move most of Odroid Go Advance DTS into a DTSI

To support more devices that are clones of this device or minor revisions without duplication move most of go2's dts into a dtsi file.

---
 .../boot/dts/rockchip/rk3326-odroid-go.dtsi   | 600 +++++++++++++++++
 .../boot/dts/rockchip/rk3326-odroid-go2.dts   | 620 +-----------------
 2 files changed, 609 insertions(+), 611 deletions(-)
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3326-odroid-go.dtsi
arch/arm64/boot/dts/rockchip/rk3326-odroid-go.dtsi new file +600 -0
new file mode 100644
index 000000000000..bab99b1b4299
@@ -0,0 +1,600 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Hardkernel Co., Ltd
+ * Copyright (c) 2020 Theobroma Systems Design und Consulting GmbH
+ * Copyright (c) 2022 Maya Matuszczyk <[email protected]>
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3326.dtsi"
+
+/ {
+	aliases {
+		mmc0 = &sdmmc;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		power-supply = <&vcc_bl>;
+		pwms = <&pwm1 0 25000 0>;
+	};
+
+	builtin_gamepad: gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&btn_pins>;
+
+		button-sw1 {
+			gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_LOW>;
+			label = "DPAD-UP";
+			linux,code = <BTN_DPAD_UP>;
+		};
+		button-sw2 {
+			gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_LOW>;
+			label = "DPAD-DOWN";
+			linux,code = <BTN_DPAD_DOWN>;
+		};
+		button-sw3 {
+			gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_LOW>;
+			label = "DPAD-LEFT";
+			linux,code = <BTN_DPAD_LEFT>;
+		};
+		button-sw4 {
+			gpios = <&gpio1 RK_PB7 GPIO_ACTIVE_LOW>;
+			label = "DPAD-RIGHT";
+			linux,code = <BTN_DPAD_RIGHT>;
+		};
+		button-sw5 {
+			gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_LOW>;
+			label = "BTN-A";
+			linux,code = <BTN_EAST>;
+		};
+		button-sw6 {
+			gpios = <&gpio1 RK_PA5 GPIO_ACTIVE_LOW>;
+			label = "BTN-B";
+			linux,code = <BTN_SOUTH>;
+		};
+		button-sw7 {
+			gpios = <&gpio1 RK_PA6 GPIO_ACTIVE_LOW>;
+			label = "BTN-Y";
+			linux,code = <BTN_WEST>;
+		};
+		button-sw8 {
+			gpios = <&gpio1 RK_PA7 GPIO_ACTIVE_LOW>;
+			label = "BTN-X";
+			linux,code = <BTN_NORTH>;
+		};
+		button-sw9 {
+			gpios = <&gpio2 RK_PA0 GPIO_ACTIVE_LOW>;
+			label = "F1";
+			linux,code = <BTN_TRIGGER_HAPPY1>;
+		};
+		button-sw10 {
+			gpios = <&gpio2 RK_PA1 GPIO_ACTIVE_LOW>;
+			label = "F2";
+			linux,code = <BTN_TRIGGER_HAPPY2>;
+		};
+		button-sw11 {
+			gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>;
+			label = "F3";
+			linux,code = <BTN_TRIGGER_HAPPY3>;
+		};
+		button-sw12 {
+			gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_LOW>;
+			label = "F4";
+			linux,code = <BTN_TRIGGER_HAPPY4>;
+		};
+		button-sw13 {
+			gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_LOW>;
+			label = "F5";
+			linux,code = <BTN_TRIGGER_HAPPY5>;
+		};
+		button-sw14 {
+			gpios = <&gpio2 RK_PA5 GPIO_ACTIVE_LOW>;
+			label = "F6";
+			linux,code = <BTN_TRIGGER_HAPPY6>;
+		};
+		button-sw15 {
+			gpios = <&gpio2 RK_PA6 GPIO_ACTIVE_LOW>;
+			label = "TOP-LEFT";
+			linux,code = <BTN_TL>;
+		};
+		button-sw16 {
+			gpios = <&gpio2 RK_PA7 GPIO_ACTIVE_LOW>;
+			label = "TOP-RIGHT";
+			linux,code = <BTN_TR>;
+		};
+	};
+
+	leds: gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&blue_led_pin>;
+
+		blue_led: led-0 {
+			label = "blue:heartbeat";
+			gpios = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	rk817-sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "Analog";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,hp-det-gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_HIGH>;
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Headphone", "Headphones",
+			"Speaker", "Speaker";
+		simple-audio-card,routing =
+			"MICL", "Mic Jack",
+			"Headphones", "HPOL",
+			"Headphones", "HPOR",
+			"Speaker", "SPKO";
+
+		simple-audio-card,codec {
+			sound-dai = <&rk817>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s1_2ch>;
+		};
+	};
+
+	vccsys: vccsys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v8_sys";
+		regulator-always-on;
+		regulator-min-microvolt = <3800000>;
+		regulator-max-microvolt = <3800000>;
+	};
+
+	vcc_host: vcc_host {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_host";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&usb_midu>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cru {
+	assigned-clocks = <&cru PLL_NPLL>,
+		<&cru ACLK_BUS_PRE>, <&cru ACLK_PERI_PRE>,
+		<&cru HCLK_BUS_PRE>, <&cru HCLK_PERI_PRE>,
+		<&cru PCLK_BUS_PRE>, <&cru SCLK_GPU>,
+		<&cru PLL_CPLL>;
+
+	assigned-clock-rates = <1188000000>,
+		<200000000>, <200000000>,
+		<150000000>, <150000000>,
+		<100000000>, <200000000>,
+		<17000000>;
+};
+
+&display_subsystem {
+	status = "okay";
+};
+
+&dsi {
+	status = "okay";
+
+	ports {
+		mipi_out: port@1 {
+			reg = <1>;
+
+			mipi_out_panel: endpoint {
+				remote-endpoint = <&mipi_in_panel>;
+			};
+		};
+	};
+
+	internal_display: panel@0 {
+		reg = <0>;
+		backlight = <&backlight>;
+		iovcc-supply = <&vcc_lcd>;
+		reset-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
+		rotation = <270>;
+		vdd-supply = <&vcc_lcd>;
+
+		port {
+			mipi_in_panel: endpoint {
+				remote-endpoint = <&mipi_out_panel>;
+			};
+		};
+	};
+};
+
+&dsi_dphy {
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_logic>;
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	i2c-scl-falling-time-ns = <16>;
+	i2c-scl-rising-time-ns = <280>;
+	status = "okay";
+
+	rk817: pmic@20 {
+		compatible = "rockchip,rk817";
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
+		clock-output-names = "rk808-clkout1", "xin32k";
+		clock-names = "mclk";
+		clocks = <&cru SCLK_I2S1_OUT>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int>, <&i2s1_2ch_mclk>;
+		wakeup-source;
+		#clock-cells = <1>;
+		#sound-dai-cells = <0>;
+
+		vcc1-supply = <&vccsys>;
+		vcc2-supply = <&vccsys>;
+		vcc3-supply = <&vccsys>;
+		vcc4-supply = <&vccsys>;
+		vcc5-supply = <&vccsys>;
+		vcc6-supply = <&vccsys>;
+		vcc7-supply = <&vccsys>;
+		vcc8-supply = <&vccsys>;
+
+		regulators {
+			vdd_logic: DCDC_REG1 {
+				regulator-name = "vdd_logic";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-ramp-delay = <6001>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <950000>;
+				};
+			};
+
+			vdd_arm: DCDC_REG2 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <950000>;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_3v3: DCDC_REG4 {
+				regulator-name = "vcc_3v3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_1v8: LDO_REG2 {
+				regulator-name = "vcc_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_1v0: LDO_REG3 {
+				regulator-name = "vdd_1v0";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc3v3_pmu: LDO_REG4 {
+				regulator-name = "vcc3v3_pmu";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-name = "vccio_sd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_sd: LDO_REG6 {
+				regulator-name = "vcc_sd";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_bl: LDO_REG7 {
+				regulator-name = "vcc_bl";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_lcd: LDO_REG8 {
+				regulator-name = "vcc_lcd";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <2800000>;
+				};
+			};
+
+			LDO_REG9 {
+				/* unused */
+			};
+
+			usb_midu: BOOST {
+				regulator-name = "usb_midu";
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5400000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+
+		rk817_charger: charger {
+			rockchip,resistor-sense-micro-ohms = <10000>;
+			rockchip,sleep-enter-current-microamp = <300000>;
+			rockchip,sleep-filter-current-microamp = <100000>;
+		};
+
+		rk817_codec: codec {
+			rockchip,mic-in-differential;
+		};
+	};
+};
+
+/* EXT Header(P2): 7(SCL:GPIO0.C2), 8(SDA:GPIO0.C3) */
+&i2c1 {
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+/* I2S 1 Channel Used */
+&i2s1_2ch {
+	status = "okay";
+};
+
+&io_domains {
+	vccio1-supply = <&vcc_3v3>;
+	vccio2-supply = <&vccio_sd>;
+	vccio3-supply = <&vcc_3v3>;
+	vccio4-supply = <&vcc_3v3>;
+	vccio5-supply = <&vcc_3v3>;
+	vccio6-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
+&pmu_io_domains {
+	pmuio1-supply = <&vcc3v3_pmu>;
+	pmuio2-supply = <&vcc3v3_pmu>;
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdmmc {
+	cap-sd-highspeed;
+	card-detect-delay = <200>;
+	cd-gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_LOW>; /*[> CD GPIO <]*/
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&sfc {
+	pinctrl-0 = <&sfc_clk &sfc_cs0 &sfc_bus2>;
+	pinctrl-names = "default";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <108000000>;
+		spi-rx-bus-width = <2>;
+		spi-tx-bus-width = <1>;
+	};
+};
+
+&tsadc {
+	status = "okay";
+};
+
+&u2phy {
+	status = "okay";
+
+	u2phy_host: host-port {
+		status = "okay";
+	};
+
+	u2phy_otg: otg-port {
+		status = "disabled";
+	};
+};
+
+&usb20_otg {
+	status = "okay";
+};
+
+/* EXT Header(P2): 2(RXD:GPIO1.C0),3(TXD:.C1),4(CTS:.C2),5(RTS:.C3) */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_xfer &uart1_cts>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2m1_xfer>;
+	status = "okay";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&pinctrl {
+	btns {
+		btn_pins: btn-pins {
+			rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	headphone {
+		hp_det: hp-det {
+			rockchip,pins = <2 RK_PC6 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	leds {
+		blue_led_pin: blue-led-pin {
+			rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		dc_det: dc-det {
+			rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pmic_int: pmic-int {
+			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		soc_slppin_gpio: soc_slppin_gpio {
+			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_output_low>;
+		};
+
+		soc_slppin_rst: soc_slppin_rst {
+			rockchip,pins = <0 RK_PA4 2 &pcfg_pull_none>;
+		};
+
+		soc_slppin_slp: soc_slppin_slp {
+			rockchip,pins = <0 RK_PA4 1 &pcfg_pull_none>;
+		};
+	};
+};
arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts +9 -611

657 lines not on this page · raw message

Signature · 1 line
2.38.1
maintainer
#2 lore raw

Re: [PATCH v3 1/5] arm64: dts: rockchip: Move most of Odroid Go Advance DTS into a DTSI

Hi,

Am Samstag, 12. November 2022, 15:34:07 CET schrieb Maya Matuszczyk:

Quoted 7 lines

To support more devices that are clones of this device or minor revisions without duplication move most of go2's dts into a dtsi file.

---
 .../boot/dts/rockchip/rk3326-odroid-go.dtsi   | 600 +++++++++++++++++
 .../boot/dts/rockchip/rk3326-odroid-go2.dts   | 620 +-----------------

shouldn't the dtsi be named after the go2? ... aka ...odroid-go2.dtsi?

Also, please provide a changelog for the changes done between versions. The --cover-letter option for git format-patch provides a nice space for that.

Thanks
Heiko

Quoted 1,274 lines
 2 files changed, 609 insertions(+), 611 deletions(-)
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3326-odroid-go.dtsi
arch/arm64/boot/dts/rockchip/rk3326-odroid-go.dtsi new file +600 -0
new file mode 100644
index 000000000000..bab99b1b4299
@@ -0,0 +1,600 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Hardkernel Co., Ltd
+ * Copyright (c) 2020 Theobroma Systems Design und Consulting GmbH
+ * Copyright (c) 2022 Maya Matuszczyk <[email protected]>
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3326.dtsi"
+
+/ {
+	aliases {
+		mmc0 = &sdmmc;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		power-supply = <&vcc_bl>;
+		pwms = <&pwm1 0 25000 0>;
+	};
+
+	builtin_gamepad: gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&btn_pins>;
+
+		button-sw1 {
+			gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_LOW>;
+			label = "DPAD-UP";
+			linux,code = <BTN_DPAD_UP>;
+		};
+		button-sw2 {
+			gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_LOW>;
+			label = "DPAD-DOWN";
+			linux,code = <BTN_DPAD_DOWN>;
+		};
+		button-sw3 {
+			gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_LOW>;
+			label = "DPAD-LEFT";
+			linux,code = <BTN_DPAD_LEFT>;
+		};
+		button-sw4 {
+			gpios = <&gpio1 RK_PB7 GPIO_ACTIVE_LOW>;
+			label = "DPAD-RIGHT";
+			linux,code = <BTN_DPAD_RIGHT>;
+		};
+		button-sw5 {
+			gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_LOW>;
+			label = "BTN-A";
+			linux,code = <BTN_EAST>;
+		};
+		button-sw6 {
+			gpios = <&gpio1 RK_PA5 GPIO_ACTIVE_LOW>;
+			label = "BTN-B";
+			linux,code = <BTN_SOUTH>;
+		};
+		button-sw7 {
+			gpios = <&gpio1 RK_PA6 GPIO_ACTIVE_LOW>;
+			label = "BTN-Y";
+			linux,code = <BTN_WEST>;
+		};
+		button-sw8 {
+			gpios = <&gpio1 RK_PA7 GPIO_ACTIVE_LOW>;
+			label = "BTN-X";
+			linux,code = <BTN_NORTH>;
+		};
+		button-sw9 {
+			gpios = <&gpio2 RK_PA0 GPIO_ACTIVE_LOW>;
+			label = "F1";
+			linux,code = <BTN_TRIGGER_HAPPY1>;
+		};
+		button-sw10 {
+			gpios = <&gpio2 RK_PA1 GPIO_ACTIVE_LOW>;
+			label = "F2";
+			linux,code = <BTN_TRIGGER_HAPPY2>;
+		};
+		button-sw11 {
+			gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>;
+			label = "F3";
+			linux,code = <BTN_TRIGGER_HAPPY3>;
+		};
+		button-sw12 {
+			gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_LOW>;
+			label = "F4";
+			linux,code = <BTN_TRIGGER_HAPPY4>;
+		};
+		button-sw13 {
+			gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_LOW>;
+			label = "F5";
+			linux,code = <BTN_TRIGGER_HAPPY5>;
+		};
+		button-sw14 {
+			gpios = <&gpio2 RK_PA5 GPIO_ACTIVE_LOW>;
+			label = "F6";
+			linux,code = <BTN_TRIGGER_HAPPY6>;
+		};
+		button-sw15 {
+			gpios = <&gpio2 RK_PA6 GPIO_ACTIVE_LOW>;
+			label = "TOP-LEFT";
+			linux,code = <BTN_TL>;
+		};
+		button-sw16 {
+			gpios = <&gpio2 RK_PA7 GPIO_ACTIVE_LOW>;
+			label = "TOP-RIGHT";
+			linux,code = <BTN_TR>;
+		};
+	};
+
+	leds: gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&blue_led_pin>;
+
+		blue_led: led-0 {
+			label = "blue:heartbeat";
+			gpios = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	rk817-sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "Analog";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,hp-det-gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_HIGH>;
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Headphone", "Headphones",
+			"Speaker", "Speaker";
+		simple-audio-card,routing =
+			"MICL", "Mic Jack",
+			"Headphones", "HPOL",
+			"Headphones", "HPOR",
+			"Speaker", "SPKO";
+
+		simple-audio-card,codec {
+			sound-dai = <&rk817>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s1_2ch>;
+		};
+	};
+
+	vccsys: vccsys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v8_sys";
+		regulator-always-on;
+		regulator-min-microvolt = <3800000>;
+		regulator-max-microvolt = <3800000>;
+	};
+
+	vcc_host: vcc_host {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_host";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&usb_midu>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cru {
+	assigned-clocks = <&cru PLL_NPLL>,
+		<&cru ACLK_BUS_PRE>, <&cru ACLK_PERI_PRE>,
+		<&cru HCLK_BUS_PRE>, <&cru HCLK_PERI_PRE>,
+		<&cru PCLK_BUS_PRE>, <&cru SCLK_GPU>,
+		<&cru PLL_CPLL>;
+
+	assigned-clock-rates = <1188000000>,
+		<200000000>, <200000000>,
+		<150000000>, <150000000>,
+		<100000000>, <200000000>,
+		<17000000>;
+};
+
+&display_subsystem {
+	status = "okay";
+};
+
+&dsi {
+	status = "okay";
+
+	ports {
+		mipi_out: port@1 {
+			reg = <1>;
+
+			mipi_out_panel: endpoint {
+				remote-endpoint = <&mipi_in_panel>;
+			};
+		};
+	};
+
+	internal_display: panel@0 {
+		reg = <0>;
+		backlight = <&backlight>;
+		iovcc-supply = <&vcc_lcd>;
+		reset-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
+		rotation = <270>;
+		vdd-supply = <&vcc_lcd>;
+
+		port {
+			mipi_in_panel: endpoint {
+				remote-endpoint = <&mipi_out_panel>;
+			};
+		};
+	};
+};
+
+&dsi_dphy {
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_logic>;
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	i2c-scl-falling-time-ns = <16>;
+	i2c-scl-rising-time-ns = <280>;
+	status = "okay";
+
+	rk817: pmic@20 {
+		compatible = "rockchip,rk817";
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
+		clock-output-names = "rk808-clkout1", "xin32k";
+		clock-names = "mclk";
+		clocks = <&cru SCLK_I2S1_OUT>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int>, <&i2s1_2ch_mclk>;
+		wakeup-source;
+		#clock-cells = <1>;
+		#sound-dai-cells = <0>;
+
+		vcc1-supply = <&vccsys>;
+		vcc2-supply = <&vccsys>;
+		vcc3-supply = <&vccsys>;
+		vcc4-supply = <&vccsys>;
+		vcc5-supply = <&vccsys>;
+		vcc6-supply = <&vccsys>;
+		vcc7-supply = <&vccsys>;
+		vcc8-supply = <&vccsys>;
+
+		regulators {
+			vdd_logic: DCDC_REG1 {
+				regulator-name = "vdd_logic";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-ramp-delay = <6001>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <950000>;
+				};
+			};
+
+			vdd_arm: DCDC_REG2 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <950000>;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_3v3: DCDC_REG4 {
+				regulator-name = "vcc_3v3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_1v8: LDO_REG2 {
+				regulator-name = "vcc_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_1v0: LDO_REG3 {
+				regulator-name = "vdd_1v0";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc3v3_pmu: LDO_REG4 {
+				regulator-name = "vcc3v3_pmu";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-name = "vccio_sd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_sd: LDO_REG6 {
+				regulator-name = "vcc_sd";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_bl: LDO_REG7 {
+				regulator-name = "vcc_bl";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_lcd: LDO_REG8 {
+				regulator-name = "vcc_lcd";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <2800000>;
+				};
+			};
+
+			LDO_REG9 {
+				/* unused */
+			};
+
+			usb_midu: BOOST {
+				regulator-name = "usb_midu";
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5400000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+
+		rk817_charger: charger {
+			rockchip,resistor-sense-micro-ohms = <10000>;
+			rockchip,sleep-enter-current-microamp = <300000>;
+			rockchip,sleep-filter-current-microamp = <100000>;
+		};
+
+		rk817_codec: codec {
+			rockchip,mic-in-differential;
+		};
+	};
+};
+
+/* EXT Header(P2): 7(SCL:GPIO0.C2), 8(SDA:GPIO0.C3) */
+&i2c1 {
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+/* I2S 1 Channel Used */
+&i2s1_2ch {
+	status = "okay";
+};
+
+&io_domains {
+	vccio1-supply = <&vcc_3v3>;
+	vccio2-supply = <&vccio_sd>;
+	vccio3-supply = <&vcc_3v3>;
+	vccio4-supply = <&vcc_3v3>;
+	vccio5-supply = <&vcc_3v3>;
+	vccio6-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
+&pmu_io_domains {
+	pmuio1-supply = <&vcc3v3_pmu>;
+	pmuio2-supply = <&vcc3v3_pmu>;
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdmmc {
+	cap-sd-highspeed;
+	card-detect-delay = <200>;
+	cd-gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_LOW>; /*[> CD GPIO <]*/
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&sfc {
+	pinctrl-0 = <&sfc_clk &sfc_cs0 &sfc_bus2>;
+	pinctrl-names = "default";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <108000000>;
+		spi-rx-bus-width = <2>;
+		spi-tx-bus-width = <1>;
+	};
+};
+
+&tsadc {
+	status = "okay";
+};
+
+&u2phy {
+	status = "okay";
+
+	u2phy_host: host-port {
+		status = "okay";
+	};
+
+	u2phy_otg: otg-port {
+		status = "disabled";
+	};
+};
+
+&usb20_otg {
+	status = "okay";
+};
+
+/* EXT Header(P2): 2(RXD:GPIO1.C0),3(TXD:.C1),4(CTS:.C2),5(RTS:.C3) */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_xfer &uart1_cts>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2m1_xfer>;
+	status = "okay";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&pinctrl {
+	btns {
+		btn_pins: btn-pins {
+			rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	headphone {
+		hp_det: hp-det {
+			rockchip,pins = <2 RK_PC6 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	leds {
+		blue_led_pin: blue-led-pin {
+			rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		dc_det: dc-det {
+			rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pmic_int: pmic-int {
+			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		soc_slppin_gpio: soc_slppin_gpio {
+			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_output_low>;
+		};
+
+		soc_slppin_rst: soc_slppin_rst {
+			rockchip,pins = <0 RK_PA4 2 &pcfg_pull_none>;
+		};
+
+		soc_slppin_slp: soc_slppin_slp {
+			rockchip,pins = <0 RK_PA4 1 &pcfg_pull_none>;
+		};
+	};
+};
arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts +9 -611
index 72899a714310..4702183b673c 100644
@@ -2,30 +2,21 @@
 /*
  * Copyright (c) 2019 Hardkernel Co., Ltd
  * Copyright (c) 2020 Theobroma Systems Design und Consulting GmbH
+ * Copyright (c) 2022 Maya Matuszczyk <[email protected]>
  */
 
 /dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/rockchip.h>
-#include "rk3326.dtsi"
+#include "rk3326-odroid-go.dtsi"
 
 / {
 	model = "ODROID-GO Advance";
 	compatible = "hardkernel,rk3326-odroid-go2", "rockchip,rk3326";
 
-	aliases {
-		mmc0 = &sdmmc;
-	};
-
-	chosen {
-		stdout-path = "serial2:115200n8";
-	};
-
-	adc-joystick {
+	analog_sticks: adc-joystick {
 		compatible = "adc-joystick";
 		io-channels = <&saradc 1>,
 			      <&saradc 2>;
+		poll-interval = <60>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 
@@ -46,12 +37,6 @@ axis@1 {
 		};
 	};
 
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		power-supply = <&vcc_bl>;
-		pwms = <&pwm1 0 25000 0>;
-	};
-
 	battery: battery {
 		compatible = "simple-battery";
 		charge-full-design-microamp-hours = <3000000>;
@@ -63,606 +48,19 @@ battery: battery {
 		voltage-min-design-microvolt = <3500000>;
 
 		ocv-capacity-celsius = <20>;
-		ocv-capacity-table-0 =	<4046950 100>, <4001920 95>, <3967900 90>, <3919950 85>,
+		ocv-capacity-table-0 =  <4046950 100>, <4001920 95>, <3967900 90>, <3919950 85>,
 					<3888450 80>, <3861850 75>, <3831540 70>, <3799130 65>,
 					<3768190 60>, <3745650 55>, <3726610 50>, <3711630 45>,
 					<3696720 40>, <3685660 35>, <3674950 30>, <3663050 25>,
 					<3649470 20>, <3635260 15>, <3616920 10>, <3592440 5>,
 					<3574170 0>;
 	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&btn_pins>;
-
-		/*
-		 *      *** ODROIDGO2-Advance Switch layout ***
-		 * |------------------------------------------------|
-		 * | sw15                                      sw16 |
-		 * |------------------------------------------------|
-		 * |     sw1      |-------------------|      sw8    |
-		 * |  sw3   sw4   |                   |   sw7   sw5 |
-		 * |     sw2      |    LCD Display    |      sw6    |
-		 * |              |                   |             |
-		 * |              |-------------------|             |
-		 * |         sw9 sw10   sw11 sw12   sw13 sw14       |
-		 * |------------------------------------------------|
-		 */
-
-		button-sw1 {
-			gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_LOW>;
-			label = "DPAD-UP";
-			linux,code = <BTN_DPAD_UP>;
-		};
-		button-sw2 {
-			gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_LOW>;
-			label = "DPAD-DOWN";
-			linux,code = <BTN_DPAD_DOWN>;
-		};
-		button-sw3 {
-			gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_LOW>;
-			label = "DPAD-LEFT";
-			linux,code = <BTN_DPAD_LEFT>;
-		};
-		button-sw4 {
-			gpios = <&gpio1 RK_PB7 GPIO_ACTIVE_LOW>;
-			label = "DPAD-RIGHT";
-			linux,code = <BTN_DPAD_RIGHT>;
-		};
-		button-sw5 {
-			gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_LOW>;
-			label = "BTN-A";
-			linux,code = <BTN_EAST>;
-		};
-		button-sw6 {
-			gpios = <&gpio1 RK_PA5 GPIO_ACTIVE_LOW>;
-			label = "BTN-B";
-			linux,code = <BTN_SOUTH>;
-		};
-		button-sw7 {
-			gpios = <&gpio1 RK_PA6 GPIO_ACTIVE_LOW>;
-			label = "BTN-Y";
-			linux,code = <BTN_WEST>;
-		};
-		button-sw8 {
-			gpios = <&gpio1 RK_PA7 GPIO_ACTIVE_LOW>;
-			label = "BTN-X";
-			linux,code = <BTN_NORTH>;
-		};
-		button-sw9 {
-			gpios = <&gpio2 RK_PA0 GPIO_ACTIVE_LOW>;
-			label = "F1";
-			linux,code = <BTN_TRIGGER_HAPPY1>;
-		};
-		button-sw10 {
-			gpios = <&gpio2 RK_PA1 GPIO_ACTIVE_LOW>;
-			label = "F2";
-			linux,code = <BTN_TRIGGER_HAPPY2>;
-		};
-		button-sw11 {
-			gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>;
-			label = "F3";
-			linux,code = <BTN_TRIGGER_HAPPY3>;
-		};
-		button-sw12 {
-			gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_LOW>;
-			label = "F4";
-			linux,code = <BTN_TRIGGER_HAPPY4>;
-		};
-		button-sw13 {
-			gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_LOW>;
-			label = "F5";
-			linux,code = <BTN_TRIGGER_HAPPY5>;
-		};
-		button-sw14 {
-			gpios = <&gpio2 RK_PA5 GPIO_ACTIVE_LOW>;
-			label = "F6";
-			linux,code = <BTN_TRIGGER_HAPPY6>;
-		};
-		button-sw15 {
-			gpios = <&gpio2 RK_PA6 GPIO_ACTIVE_LOW>;
-			label = "TOP-LEFT";
-			linux,code = <BTN_TL>;
-		};
-		button-sw16 {
-			gpios = <&gpio2 RK_PA7 GPIO_ACTIVE_LOW>;
-			label = "TOP-RIGHT";
-			linux,code = <BTN_TR>;
-		};
-	};
-
-	leds: gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&blue_led_pin>;
-
-		blue_led: led-0 {
-			label = "blue:heartbeat";
-			gpios = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	rk817-sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "Analog";
-		simple-audio-card,format = "i2s";
-		simple-audio-card,hp-det-gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_HIGH>;
-		simple-audio-card,mclk-fs = <256>;
-		simple-audio-card,widgets =
-			"Microphone", "Mic Jack",
-			"Headphone", "Headphones",
-			"Speaker", "Speaker";
-		simple-audio-card,routing =
-			"MICL", "Mic Jack",
-			"Headphones", "HPOL",
-			"Headphones", "HPOR",
-			"Speaker", "SPKO";
-
-		simple-audio-card,codec {
-			sound-dai = <&rk817>;
-		};
-
-		simple-audio-card,cpu {
-			sound-dai = <&i2s1_2ch>;
-		};
-	};
-
-	vccsys: vccsys {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc3v8_sys";
-		regulator-always-on;
-		regulator-min-microvolt = <3800000>;
-		regulator-max-microvolt = <3800000>;
-	};
-
-	vcc_host: vcc_host {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc_host";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-
-		gpio = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&usb_midu>;
-	};
-};
-
-&cpu0 {
-	cpu-supply = <&vdd_arm>;
-};
-
-&cpu1 {
-	cpu-supply = <&vdd_arm>;
-};
-
-&cpu2 {
-	cpu-supply = <&vdd_arm>;
-};
-
-&cpu3 {
-	cpu-supply = <&vdd_arm>;
-};
-
-&cru {
-	assigned-clocks = <&cru PLL_NPLL>,
-		<&cru ACLK_BUS_PRE>, <&cru ACLK_PERI_PRE>,
-		<&cru HCLK_BUS_PRE>, <&cru HCLK_PERI_PRE>,
-		<&cru PCLK_BUS_PRE>, <&cru SCLK_GPU>,
-		<&cru PLL_CPLL>;
-
-	assigned-clock-rates = <1188000000>,
-		<200000000>, <200000000>,
-		<150000000>, <150000000>,
-		<100000000>, <200000000>,
-		<17000000>;
 };
 
-&display_subsystem {
-	status = "okay";
+&internal_display {
+	compatible = "elida,kd35t133";
 };
 
-&dsi {
-	status = "okay";
-
-	ports {
-		mipi_out: port@1 {
-			reg = <1>;
-
-			mipi_out_panel: endpoint {
-				remote-endpoint = <&mipi_in_panel>;
-			};
-		};
-	};
-
-	panel@0 {
-		compatible = "elida,kd35t133";
-		reg = <0>;
-		backlight = <&backlight>;
-		iovcc-supply = <&vcc_lcd>;
-		reset-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
-		rotation = <270>;
-		vdd-supply = <&vcc_lcd>;
-
-		port {
-			mipi_in_panel: endpoint {
-				remote-endpoint = <&mipi_out_panel>;
-			};
-		};
-	};
-};
-
-&dsi_dphy {
-	status = "okay";
-};
-
-&gpu {
-	mali-supply = <&vdd_logic>;
-	status = "okay";
-};
-
-&i2c0 {
-	clock-frequency = <400000>;
-	i2c-scl-falling-time-ns = <16>;
-	i2c-scl-rising-time-ns = <280>;
-	status = "okay";
-
-	rk817: pmic@20 {
-		compatible = "rockchip,rk817";
-		reg = <0x20>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
-		clock-output-names = "rk808-clkout1", "xin32k";
-		clock-names = "mclk";
-		clocks = <&cru SCLK_I2S1_OUT>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pmic_int>, <&i2s1_2ch_mclk>;
-		wakeup-source;
-		#clock-cells = <1>;
-		#sound-dai-cells = <0>;
-
-		vcc1-supply = <&vccsys>;
-		vcc2-supply = <&vccsys>;
-		vcc3-supply = <&vccsys>;
-		vcc4-supply = <&vccsys>;
-		vcc5-supply = <&vccsys>;
-		vcc6-supply = <&vccsys>;
-		vcc7-supply = <&vccsys>;
-		vcc8-supply = <&vccsys>;
-
-		regulators {
-			vdd_logic: DCDC_REG1 {
-				regulator-name = "vdd_logic";
-				regulator-min-microvolt = <950000>;
-				regulator-max-microvolt = <1150000>;
-				regulator-ramp-delay = <6001>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <950000>;
-				};
-			};
-
-			vdd_arm: DCDC_REG2 {
-				regulator-name = "vdd_arm";
-				regulator-min-microvolt = <950000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-ramp-delay = <6001>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-					regulator-suspend-microvolt = <950000>;
-				};
-			};
-
-			vcc_ddr: DCDC_REG3 {
-				regulator-name = "vcc_ddr";
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			vcc_3v3: DCDC_REG4 {
-				regulator-name = "vcc_3v3";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-					regulator-suspend-microvolt = <3300000>;
-				};
-			};
-
-			vcc_1v8: LDO_REG2 {
-				regulator-name = "vcc_1v8";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1800000>;
-				};
-			};
-
-			vdd_1v0: LDO_REG3 {
-				regulator-name = "vdd_1v0";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1000000>;
-				};
-			};
-
-			vcc3v3_pmu: LDO_REG4 {
-				regulator-name = "vcc3v3_pmu";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <3300000>;
-				};
-			};
-
-			vccio_sd: LDO_REG5 {
-				regulator-name = "vccio_sd";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <3300000>;
-				};
-			};
-
-			vcc_sd: LDO_REG6 {
-				regulator-name = "vcc_sd";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <3300000>;
-				};
-			};
-
-			vcc_bl: LDO_REG7 {
-				regulator-name = "vcc_bl";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-					regulator-suspend-microvolt = <3300000>;
-				};
-			};
-
-			vcc_lcd: LDO_REG8 {
-				regulator-name = "vcc_lcd";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-					regulator-suspend-microvolt = <2800000>;
-				};
-			};
-
-			vcc_cam: LDO_REG9 {
-				regulator-name = "vcc_cam";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-					regulator-suspend-microvolt = <3000000>;
-				};
-			};
-
-			usb_midu: BOOST {
-				regulator-name = "usb_midu";
-				regulator-min-microvolt = <5000000>;
-				regulator-max-microvolt = <5400000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-		};
-
-		rk817_charger: charger {
-			monitored-battery = <&battery>;
-			rockchip,resistor-sense-micro-ohms = <10000>;
-			rockchip,sleep-enter-current-microamp = <300000>;
-			rockchip,sleep-filter-current-microamp = <100000>;
-		};
-
-		rk817_codec: codec {
-			rockchip,mic-in-differential;
-		};
-	};
-};
-
-/* EXT Header(P2): 7(SCL:GPIO0.C2), 8(SDA:GPIO0.C3) */
-&i2c1 {
-	clock-frequency = <400000>;
-	status = "okay";
-};
-
-/* I2S 1 Channel Used */
-&i2s1_2ch {
-	status = "okay";
-};
-
-&io_domains {
-	vccio1-supply = <&vcc_3v3>;
-	vccio2-supply = <&vccio_sd>;
-	vccio3-supply = <&vcc_3v3>;
-	vccio4-supply = <&vcc_3v3>;
-	vccio5-supply = <&vcc_3v3>;
-	vccio6-supply = <&vcc_3v3>;
-	status = "okay";
-};
-
-&pmu_io_domains {
-	pmuio1-supply = <&vcc3v3_pmu>;
-	pmuio2-supply = <&vcc3v3_pmu>;
-	status = "okay";
-};
-
-&pwm1 {
-	status = "okay";
-};
-
-&saradc {
-	vref-supply = <&vcc_1v8>;
-	status = "okay";
-};
-
-&sdmmc {
-	cap-sd-highspeed;
-	card-detect-delay = <200>;
-	cd-gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_LOW>; /*[> CD GPIO <]*/
-	sd-uhs-sdr12;
-	sd-uhs-sdr25;
-	sd-uhs-sdr50;
-	sd-uhs-sdr104;
-	vmmc-supply = <&vcc_sd>;
-	vqmmc-supply = <&vccio_sd>;
-	status = "okay";
-};
-
-&sfc {
-	pinctrl-0 = <&sfc_clk &sfc_cs0 &sfc_bus2>;
-	pinctrl-names = "default";
-	#address-cells = <1>;
-	#size-cells = <0>;
-	status = "okay";
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <108000000>;
-		spi-rx-bus-width = <2>;
-		spi-tx-bus-width = <1>;
-	};
-};
-
-&tsadc {
-	status = "okay";
-};
-
-&u2phy {
-	status = "okay";
-
-	u2phy_host: host-port {
-		status = "okay";
-	};
-
-	u2phy_otg: otg-port {
-		status = "disabled";
-	};
-};
-
-&usb20_otg {
-	status = "okay";
-};
-
-/* EXT Header(P2): 2(RXD:GPIO1.C0),3(TXD:.C1),4(CTS:.C2),5(RTS:.C3) */
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_xfer &uart1_cts>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart2m1_xfer>;
-	status = "okay";
-};
-
-&vopb {
-	status = "okay";
-};
-
-&vopb_mmu {
-	status = "okay";
-};
-
-&pinctrl {
-	btns {
-		btn_pins: btn-pins {
-			rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
-					<1 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
-					<1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
-					<1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
-					<1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>,
-					<1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>,
-					<1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>,
-					<1 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>,
-					<2 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>,
-					<2 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>,
-					<2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
-					<2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>,
-					<2 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
-					<2 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
-					<2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
-					<2 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-	};
-
-	headphone {
-		hp_det: hp-det {
-			rockchip,pins = <2 RK_PC6 RK_FUNC_GPIO &pcfg_pull_down>;
-		};
-	};
-
-	leds {
-		blue_led_pin: blue-led-pin {
-			rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	pmic {
-		dc_det: dc-det {
-			rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		pmic_int: pmic-int {
-			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-
-		soc_slppin_gpio: soc_slppin_gpio {
-			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_output_low>;
-		};
-
-		soc_slppin_rst: soc_slppin_rst {
-			rockchip,pins = <0 RK_PA4 2 &pcfg_pull_none>;
-		};
-
-		soc_slppin_slp: soc_slppin_slp {
-			rockchip,pins = <0 RK_PA4 1 &pcfg_pull_none>;
-		};
-	};
+&rk817_charger {
+	monitored-battery = <&battery>;
 };
#3 lore raw

PATCH v3 2/5 dt-bindings: arm: rockchip: Add more RK3326 devices

In reply to Maya Matuszczyk
---
 .../devicetree/bindings/arm/rockchip.yaml         | 15 +++++++++++++++
 1 file changed, 15 insertions(+)
Documentation/devicetree/bindings/arm/rockchip.yaml +15 -0
index c6c69a4e3777..d2748826cf39 100644
@@ -30,6 +30,11 @@ properties:
           - const: amarula,vyasa-rk3288
           - const: rockchip,rk3288
 
+      - description: Anbernic RG351M
+        items:
+          - const: anbernic,rg351m
+          - const: rockchip,rk3326
+
       - description: Anbernic RG353P
         items:
           - const: anbernic,rg353p
@@ -468,6 +473,16 @@ properties:
           - const: hardkernel,rk3326-odroid-go2
           - const: rockchip,rk3326
 
+      - description: Hardkernel Odroid Go Advance Black Edition
+        items:
+          - const: hardkernel,rk3326-odroid-go2-v11
+          - const: rockchip,rk3326
+
+      - description: Hardkernel Odroid Go Super
+        items:
+          - const: hardkernel,rk3326-odroid-go3
+          - const: rockchip,rk3326
+
       - description: Hugsun X99 TV Box
         items:
           - const: hugsun,x99
Signature · 1 line
2.38.1
#4 lore raw

Re: [PATCH v3 2/5] dt-bindings: arm: rockchip: Add more RK3326 devices

On 12/11/2022 15:34, Maya Matuszczyk wrote:

Missing commit msg, which is actually easy to write - you need to list devices you are adding.

Quoted 4 lines
---
 .../devicetree/bindings/arm/rockchip.yaml         | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

Best regards,
Krzysztof

#5 lore raw

PATCH v3 3/5 arm64: dts: rockchip: Add Odroid Go Advance Black Edition

In reply to Maya Matuszczyk

This device is a minor revision of the origin Odroid Go Advance, with added two more buttons and a WiFi card

---
 arch/arm64/boot/dts/rockchip/Makefile         |   1 +
 .../dts/rockchip/rk3326-odroid-go2-v11.dts    | 156 ++++++++++++++++++
 2 files changed, 157 insertions(+)
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3326-odroid-go2-v11.dts
arch/arm64/boot/dts/rockchip/Makefile +1 -0
index 8c15593c0ca4..12446f531d29 100644
@@ -8,6 +8,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-roc-cc.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-rock-pi-s.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3318-a95x-z2.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go2.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go2-v11.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-a1.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-evb.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2s.dtb
arch/arm64/boot/dts/rockchip/rk3326-odroid-go2-v11.dts new file +156 -0

156 lines not on this page · raw message

Signature · 1 line
2.38.1
#6 lore raw

PATCH v3 4/5 arm64: dts: rockchip: Add Odroid Go Super

In reply to Maya Matuszczyk

This device is another revision of Odroid Go Advance, with added two volume buttons, a second analog stick and a bigger screen that isn't yet supported in the Mainline Kernel.

---
 arch/arm64/boot/dts/rockchip/Makefile         |   1 +
 .../boot/dts/rockchip/rk3326-odroid-go3.dts   | 161 ++++++++++++++++++
 2 files changed, 162 insertions(+)
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3326-odroid-go3.dts
arch/arm64/boot/dts/rockchip/Makefile +1 -0
index 12446f531d29..142c83d2e5aa 100644
@@ -9,6 +9,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-rock-pi-s.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3318-a95x-z2.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go2.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go2-v11.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go3.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-a1.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-evb.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2s.dtb
arch/arm64/boot/dts/rockchip/rk3326-odroid-go3.dts new file +161 -0

161 lines not on this page · raw message

Signature · 1 line
2.38.1
#7 lore raw

Re: [PATCH v3 4/5] arm64: dts: rockchip: Add Odroid Go Super

Quoted 35 lines · Maya Matuszczyk

This device is another revision of Odroid Go Advance, with added two volume buttons, a second analog stick and a bigger screen that isn't yet supported in the Mainline Kernel.

---
 arch/arm64/boot/dts/rockchip/Makefile         |   1 +
 .../boot/dts/rockchip/rk3326-odroid-go3.dts   | 161 ++++++++++++++++++
 2 files changed, 162 insertions(+)
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3326-odroid-go3.dts
arch/arm64/boot/dts/rockchip/Makefile +1 -0
index 12446f531d29..142c83d2e5aa 100644
@@ -9,6 +9,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-rock-pi-s.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3318-a95x-z2.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go2.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go2-v11.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go3.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-a1.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-evb.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2s.dtb
arch/arm64/boot/dts/rockchip/rk3326-odroid-go3.dts new file +6 -0
new file mode 100644
index 000000000000..4b6c896d8abd
@@ -0,0 +1,161 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Hardkernel Co., Ltd
+ * Copyright (c) 2020 Theobroma Systems Design und Consulting GmbH
+ * Copyright (c) 2022 Maya Matuszczyk <[email protected]>
+ */

arch/arm64/boot/dts/rockchip/rk3326-odroid-go3.dts line 16

Quoted 10 lines
arch/arm64/boot/dts/rockchip/rk3326-odroid-go3.dts new file +10 -0
+
+/dts-v1/;
+#include "rk3326-odroid-go.dtsi"
+
+/ {
+	model = "ODROID-GO Super";
+	compatible = "hardkernel,rk3326-odroid-go3", "rockchip,rk3326";
+
+	joystick_mux_controller: mux-controller {
+		status = "okay";

Why adding status? Also, it's not a first property...

arch/arm64/boot/dts/rockchip/rk3326-odroid-go3.dts line 26

Quoted 10 lines
arch/arm64/boot/dts/rockchip/rk3326-odroid-go3.dts new file +10 -0
+		compatible = "gpio-mux";
+		pinctrl = <&mux_en_pins>;
+		#mux-control-cells = <0>;
+
+		mux-gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>,
+			    <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>;
+	};
+
+	joystick_mux: adc-mux {
+		status = "okay";

Why status? Is it a node override?

arch/arm64/boot/dts/rockchip/rk3326-odroid-go3.dts

Quoted 3 lines
arch/arm64/boot/dts/rockchip/rk3326-odroid-go3.dts new file +3 -0
+		compatible = "io-channel-mux";
+		io-channels = <&saradc 1>;
+		io-channel-names = "parent

Best regards,
Krzysztof

#8 lore raw

PATCH v3 5/5 arm64: dts: rockchip: Add Anbernic RG351M

In reply to Maya Matuszczyk

This device is a clone of Odroid Go Advance, with added PWM motor, internal gamepad connected on USB instead of just having it be on GPIO + ADC, and missing battery shunt resistor.

There's also an LED on GPIO 77(I *guess* PB5 on &gpio2), that is controlled in a weird way:

- It is set to red by setting output value to 1
- Set to green by setting output value to 0
- Set to yellow by setting gpio direction to input

I have no idea how to describe that in DTS, without adding a custom driver, for now it's just left out.

---
 arch/arm64/boot/dts/rockchip/Makefile         |  1 +
 .../dts/rockchip/rk3326-anbernic-rg351m.dts   | 54 +++++++++++++++++++
 2 files changed, 55 insertions(+)
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351m.dts
arch/arm64/boot/dts/rockchip/Makefile +1 -0
index 142c83d2e5aa..b379516c15eb 100644
@@ -7,6 +7,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-evb.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-roc-cc.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-rock-pi-s.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3318-a95x-z2.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-anbernic-rg351m.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go2.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go2-v11.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go3.dtb
arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351m.dts new file +54 -0

54 lines not on this page · raw message

Signature · 1 line
2.38.1
#9 lore raw

Re: [PATCH v3 5/5] arm64: dts: rockchip: Add Anbernic RG351M

Quoted 3 lines · Maya Matuszczyk

This device is a clone of Odroid Go Advance, with added PWM motor, internal gamepad connected on USB instead of just having it be on GPIO + ADC, and missing battery shunt resistor.

I have concerns about using the rk817 battery driver with no shunt resistor. For the moment, that would result in wrong values being given for battery capacity and current. What could be done is to update the driver to only check voltage values when the shunt resistor is missing (since it's the current values and columb counter that gets affected with no resistor in place). For now though, I'd just remove the battery and charger since it's going to report the wrong data to users.

Quoted 9 lines

There's also an LED on GPIO 77(I *guess* PB5 on &gpio2), that is controlled in a weird way:

- It is set to red by setting output value to 1
- Set to green by setting output value to 0
- Set to yellow by setting gpio direction to input

I have no idea how to describe that in DTS, without adding a custom driver, for now it's just left out.

Check out this document, it says you'd group them together under a multicolor led node:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml

Quoted 83 lines
---
 arch/arm64/boot/dts/rockchip/Makefile         |  1 +
 .../dts/rockchip/rk3326-anbernic-rg351m.dts   | 54 +++++++++++++++++++
 2 files changed, 55 insertions(+)
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351m.dts
arch/arm64/boot/dts/rockchip/Makefile +1 -0
index 142c83d2e5aa..b379516c15eb 100644
@@ -7,6 +7,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-evb.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-roc-cc.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-rock-pi-s.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3318-a95x-z2.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-anbernic-rg351m.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go2.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go2-v11.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go3.dtb
arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351m.dts new file +54 -0
new file mode 100644
index 000000000000..7f4726d4130e
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Hardkernel Co., Ltd
+ * Copyright (c) 2020 Theobroma Systems Design und Consulting GmbH
+ * Copyright (c) 2022 Maya Matuszczyk <[email protected]>
+ */
+
+/dts-v1/;
+#include "rk3326-odroid-go.dtsi"
+
+/ {
+	model = "Anbernic RG351M";
+	compatible = "anbernic,rg351m", "rockchip,rk3326";
+
+	battery: battery {
+		compatible = "simple-battery";
+		charge-full-design-microamp-hours = <3450000>;
+		charge-term-current-microamp = <300000>;
+		constant-charge-current-max-microamp = <2000000>;
+		constant-charge-voltage-max-microvolt = <4200000>;
+		factory-internal-resistance-micro-ohms = <100000>;
+		voltage-max-design-microvolt = <4100000>;
+		voltage-min-design-microvolt = <3500000>;
+
+		ocv-capacity-celsius = <20>;
+		ocv-capacity-table-0 =  <4046950 100>, <4001920 95>, <3967900 90>, <3919950 85>,
+					<3888450 80>, <3861850 75>, <3831540 70>, <3799130 65>,
+					<3768190 60>, <3745650 55>, <3726610 50>, <3711630 45>,
+					<3696720 40>, <3685660 35>, <3674950 30>, <3663050 25>,
+					<3649470 20>, <3635260 15>, <3616920 10>, <3592440 5>,
+					<3574170 0>;
+	};
+
+	vibrator {
+		compatible = "pwm-vibrator";
+		pwms = <&pwm0 0 1000000 0>;
+		pwm-names = "enable";
+	};
+};
+
+/delete-node/ &builtin_gamepad;
+/delete-node/ &vcc_host; /* conflicts with pwm vibration motor */
+
+&internal_display {
+	compatible = "elida,kd35t133";
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&rk817_charger {
+	monitored-battery = <&battery>;
+};
Signature · 1 line
2.38.1
#10 lore raw

Re: [PATCH v3 5/5] arm64: dts: rockchip: Add Anbernic RG351M

pon., 14 lis 2022 o 15:23 Chris Morgan <[email protected]> napisał(a):

Quoted 6 lines · Maya Matuszczyk
Quoted 3 lines

This device is a clone of Odroid Go Advance, with added PWM motor, internal gamepad connected on USB instead of just having it be on GPIO + ADC, and missing battery shunt resistor.

Quoted 8 lines

I have concerns about using the rk817 battery driver with no shunt resistor. For the moment, that would result in wrong values being given for battery capacity and current. What could be done is to update the driver to only check voltage values when the shunt resistor is missing (since it's the current values and columb counter that gets affected with no resistor in place). For now though, I'd just remove the battery and charger since it's going to report the wrong data to users.

I guess that's fair... the device literally has no shunt resistor and DT should reflect hardware.

Quoted 8 lines
Quoted 8 lines

There's also an LED on GPIO 77(I *guess* PB5 on &gpio2), that is controlled in a weird way:

- It is set to red by setting output value to 1
- Set to green by setting output value to 0
- Set to yellow by setting gpio direction to input

Quoted 6 lines
Quoted 2 lines

I have no idea how to describe that in DTS, without adding a custom driver, for now it's just left out.

Check out this document, it says you'd group them together under a multicolor led node:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml

As far as I know there is no support to controlling LED in a way that this device requires the LED to be controlled.
It's just one GPIO, and setting it to outputting 0, outputting 1 or to input changes the color and there's no way to turn it off.

Best Regards,
Maya Matuszczyk

Quoted 84 lines
Quoted 84 lines
---
 arch/arm64/boot/dts/rockchip/Makefile         |  1 +
 .../dts/rockchip/rk3326-anbernic-rg351m.dts   | 54 +++++++++++++++++++
 2 files changed, 55 insertions(+)
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351m.dts
arch/arm64/boot/dts/rockchip/Makefile +1 -0
index 142c83d2e5aa..b379516c15eb 100644
@@ -7,6 +7,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-evb.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-roc-cc.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-rock-pi-s.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3318-a95x-z2.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-anbernic-rg351m.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go2.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go2-v11.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go3.dtb
arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351m.dts new file +54 -1
new file mode 100644
index 000000000000..7f4726d4130e
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Hardkernel Co., Ltd
+ * Copyright (c) 2020 Theobroma Systems Design und Consulting GmbH
+ * Copyright (c) 2022 Maya Matuszczyk <[email protected]>
+ */
+
+/dts-v1/;
+#include "rk3326-odroid-go.dtsi"
+
+/ {
+     model = "Anbernic RG351M";
+     compatible = "anbernic,rg351m", "rockchip,rk3326";
+
+     battery: battery {
+             compatible = "simple-battery";
+             charge-full-design-microamp-hours = <3450000>;
+             charge-term-current-microamp = <300000>;
+             constant-charge-current-max-microamp = <2000000>;
+             constant-charge-voltage-max-microvolt = <4200000>;
+             factory-internal-resistance-micro-ohms = <100000>;
+             voltage-max-design-microvolt = <4100000>;
+             voltage-min-design-microvolt = <3500000>;
+
+             ocv-capacity-celsius = <20>;
+             ocv-capacity-table-0 =  <4046950 100>, <4001920 95>, <3967900 90>, <3919950 85>,
+                                     <3888450 80>, <3861850 75>, <3831540 70>, <3799130 65>,
+                                     <3768190 60>, <3745650 55>, <3726610 50>, <3711630 45>,
+                                     <3696720 40>, <3685660 35>, <3674950 30>, <3663050 25>,
+                                     <3649470 20>, <3635260 15>, <3616920 10>, <3592440 5>,
+                                     <3574170 0>;
+     };
+
+     vibrator {
+             compatible = "pwm-vibrator";
+             pwms = <&pwm0 0 1000000 0>;
+             pwm-names = "enable";
+     };
+};
+
+/delete-node/ &builtin_gamepad;
+/delete-node/ &vcc_host; /* conflicts with pwm vibration motor */
+
+&internal_display {
+     compatible = "elida,kd35t133";
+};
+
+&pwm0 {
+     status = "okay";
+};
+
+&rk817_charger {
+     monitored-battery = <&battery>;
+};
--

2.38.1