iommu/vt-d: Some cleanups
Subsystems (2)
Lu Baolu
maintainerv3 cover iommu/vt-d: Some cleanups
Hi,
This series includes some cleanups in the Intel IOMMU implementation after the IOMMU core implemented the blocking domain. The cleanup work is mainly in the attach_dev/device_probe/device_release paths.
Please help to review.
Best regards,
baolu
Change log:
v3:
- Disable PCI capabilities (PASID/ATS/PRI) when there's no domain attached to the device.
v2:
- https://lore.kernel.org/linux-iommu/[email protected]/
- Reorder the patches to make the device_block_translation() work with
the existing path first.
- Add a new patch to improve iommu_enable_pci_caps().
v1:
- https://lore.kernel.org/linux-iommu/[email protected]/
Lu Baolu (7):
iommu/vt-d: Allocate pasid table in device probe path iommu/vt-d: Add device_block_translation() helper iommu/vt-d: Add blocking domain support iommu/vt-d: Fold dmar_remove_one_dev_info() into its caller iommu/vt-d: Rename domain_add_dev_info() iommu/vt-d: Remove unnecessary domain_context_mapped() iommu/vt-d: Use real field for indication of first level
drivers/iommu/intel/iommu.h | 15 ++-- drivers/iommu/intel/iommu.c | 172 ++++++++++++++++-------------------- 2 files changed, 81 insertions(+), 106 deletions(-)
Signature · 1 line
2.34.1
Lu Baolu
maintainerPATCH v3 1/7 iommu/vt-d: Allocate pasid table in device probe path
Whether or not a domain is attached to the device, the pasid table should always be valid as long as it has been probed. This moves the pasid table allocation from the domain attaching device path to device probe path and frees it in the device release path.
--- drivers/iommu/intel/iommu.c | 20 ++++++++++++-------- 1 file changed, 12 insertions(+), 8 deletions(-)
drivers/iommu/intel/iommu.c +12 -8
@@ -2477,13 +2477,6 @@ static int domain_add_dev_info(struct dmar_domain *domain, struct device *dev)/* PASID table is mandatory for a PCI device in scalable mode. */ if (sm_supported (iommu) && !dev_is_real_dma_subdevice (dev)) { - ret =intel_pasid_alloc_table (dev); -if (ret) { -dev_err (dev,"PASID table allocation failed\n" ); -dmar_remove_one_dev_info (dev); -return ret; - } -/* Setup the PASID entry for requests without PASID: */ if (hw_pass_through &&domain_type_is_si (domain)) ret = intel_pasid_setup_pass_through(iommu, domain,
@@ -4108,7 +4101,6 @@ static void dmar_remove_one_dev_info(struct device *dev)iommu_disable_dev_iotlb (info);domain_context_clear (info); -intel_pasid_free_table (info->dev); }spin_lock_irqsave (&domain->lock, flags);
@@ -4466,6 +4458,7 @@ static struct iommu_device *intel_iommu_probe_device(struct device *dev)struct device_domain_info *info;struct intel_iommu *iommu;u8 bus, devfn; +int ret; iommu =device_to_iommu (dev, &bus, &devfn);if (!iommu || !iommu->iommu.ops)
@@ -4509,6 +4502,16 @@ static struct iommu_device *intel_iommu_probe_device(struct device *dev)dev_iommu_priv_set (dev, info); +if (sm_supported (iommu) && !dev_is_real_dma_subdevice (dev)) { + ret =intel_pasid_alloc_table (dev); +if (ret) { +dev_err (dev,"PASID table allocation failed\n" ); +dev_iommu_priv_set (dev,NULL ); +kfree (info); +return ERR_PTR (ret); + } + } +return &iommu->iommu; }
@@ -4517,6 +4520,7 @@ static void intel_iommu_release_device(struct device *dev)struct device_domain_info *info =dev_iommu_priv_get (dev);dmar_remove_one_dev_info (dev); +intel_pasid_free_table (dev);dev_iommu_priv_set (dev,NULL );kfree (info);set_dma_ops (dev,NULL );
Signature · 1 line
2.34.1
Lu Baolu
maintainerPATCH v3 2/7 iommu/vt-d: Add device_block_translation() helper
In reply to Lu BaoluIf domain attaching to device fails, the IOMMU driver should bring the device to blocking DMA state. The upper layer is expected to recover it by attaching a new domain. Use device_block_translation() in the error path of dev_attach to make the behavior specific.
The difference between device_block_translation() and the previous dmar_remove_one_dev_info() is that, in the scalable mode, it is the RID2PASID entry instead of context entry being cleared. As a result, enabling PCI capabilities is moved up.
--- drivers/iommu/intel/iommu.c | 44 ++++++++++++++++++++++++++++++++----- 1 file changed, 38 insertions(+), 6 deletions(-)
drivers/iommu/intel/iommu.c +38 -6
@@ -277,7 +277,7 @@ static LIST_HEAD(dmar_satc_units);#define for_each_rmrr_units (rmrr) \ list_for_each_entry(rmrr, &dmar_rmrr_units, list) -static void dmar_remove_one_dev_info (struct device *dev); +static void device_block_translation (struct device *dev);int dmar_disabled = !IS_ENABLED (CONFIG_INTEL_IOMMU_DEFAULT_ON );int intel_iommu_sm =IS_ENABLED (CONFIG_INTEL_IOMMU_SCALABLE_MODE_DEFAULT_ON );
@@ -1402,7 +1402,7 @@ static void iommu_enable_pci_caps(struct device_domain_info *info) {struct pci_dev *pdev; -if (!info || !dev_is_pci (info->dev)) +if (!dev_is_pci (info->dev))return ; pdev =to_pci_dev (info->dev);
@@ -2047,7 +2047,6 @@ static int domain_context_mapping_one(struct dmar_domain *domain, }else {iommu_flush_write_buffer (iommu); } -iommu_enable_pci_caps (info); ret =0 ;
@@ -2489,7 +2488,7 @@ static int domain_add_dev_info(struct dmar_domain *domain, struct device *dev) dev, PASID_RID2PASID);if (ret) {dev_err (dev,"Setup RID2PASID failed\n" ); -dmar_remove_one_dev_info (dev); +device_block_translation (dev);return ret; } }
@@ -2497,10 +2496,12 @@ static int domain_add_dev_info(struct dmar_domain *domain, struct device *dev) ret =domain_context_mapping (domain, dev);if (ret) {dev_err (dev,"Domain context map failed\n" ); -dmar_remove_one_dev_info (dev); +device_block_translation (dev);return ret; } +iommu_enable_pci_caps (info); +return 0 ; }
@@ -4111,6 +4112,37 @@ static void dmar_remove_one_dev_info(struct device *dev) info->domain =NULL ; } +/* +* Clear the page table pointer in context or pasid table entries so that +* all DMA requests without PASID from the device are blocked. If the page +* table has been set, clean up the data structures. +*/ +static void device_block_translation (struct device *dev) +{ +struct device_domain_info *info =dev_iommu_priv_get (dev); +struct intel_iommu *iommu = info->iommu; +unsigned long flags; + +iommu_disable_dev_iotlb (info); +if (!dev_is_real_dma_subdevice (dev)) { +if (sm_supported (iommu)) +intel_pasid_tear_down_entry (iommu, dev, +PASID_RID2PASID , false); +else +domain_context_clear (info); + } + +if (!info->domain) +return ; + +spin_lock_irqsave (&info->domain->lock, flags); +list_del (&info->link); +spin_unlock_irqrestore (&info->domain->lock, flags); + +domain_detach_iommu (info->domain, iommu); + info->domain =NULL ; +} +static int md_domain_init (struct dmar_domain *domain,int guest_width) {int adjust_width;
@@ -4232,7 +4264,7 @@ static int intel_iommu_attach_device(struct iommu_domain *domain,struct device_domain_info *info =dev_iommu_priv_get (dev);if (info->domain) -dmar_remove_one_dev_info (dev); +device_block_translation (dev); } ret =prepare_domain_attach_device (domain, dev);
Signature · 1 line
2.34.1
RE: [PATCH v3 2/7] iommu/vt-d: Add device_block_translation() helper
Quoted 8 lines
From: Lu Baolu <[email protected]>
Sent: Monday, November 14, 2022 9:41 AMIf domain attaching to device fails, the IOMMU driver should bring the device to blocking DMA state. The upper layer is expected to recover it by attaching a new domain. Use
device_block_translation()in the error path ofdev_attachto make the behavior specific.
Quoted 6 lines
The difference between
device_block_translation()and the previousdmar_remove_one_dev_info()is that, in the scalable mode, it is the RID2PASID entry instead of context entry being cleared. As a result, enabling PCI capabilities is moved up.Signed-off-by Lu Baolu <[email protected]>
Lu Baolu
maintainerPATCH v3 3/7 iommu/vt-d: Add blocking domain support
In reply to Lu BaoluThe Intel IOMMU hardwares support blocking DMA transactions by clearing the translation table entries. This implements a real blocking domain to avoid using an empty UNMANAGED domain. The detach_dev callback of the domain ops is not used in any path. Remove it to avoid dead code as well.
--- drivers/iommu/intel/iommu.c | 26 ++++++++++++++++++-------- 1 file changed, 18 insertions(+), 8 deletions(-)
drivers/iommu/intel/iommu.c +18 -8
@@ -278,6 +278,7 @@ static LIST_HEAD(dmar_satc_units);list_for_each_entry (rmrr, &dmar_rmrr_units, list) static void device_block_translation(struct device *dev); +static void intel_iommu_domain_free (struct iommu_domain *domain);int dmar_disabled = !IS_ENABLED (CONFIG_INTEL_IOMMU_DEFAULT_ON );int intel_iommu_sm =IS_ENABLED (CONFIG_INTEL_IOMMU_SCALABLE_MODE_DEFAULT_ON );
@@ -4164,12 +4165,28 @@ static int md_domain_init(struct dmar_domain *domain, int guest_width)return 0 ; } +static int blocking_domain_attach_dev (struct iommu_domain *domain, +struct device *dev) +{ +device_block_translation (dev); +return 0 ; +} + +static struct iommu_domain blocking_domain = { + .ops = &(const struct iommu_domain_ops ) { + .attach_dev = blocking_domain_attach_dev, + .free = intel_iommu_domain_free + } +}; +static struct iommu_domain *intel_iommu_domain_alloc (unsigned type) {struct dmar_domain *dmar_domain;struct iommu_domain *domain;switch (type) { +case IOMMU_DOMAIN_BLOCKED : +return &blocking_domain;case IOMMU_DOMAIN_DMA :case IOMMU_DOMAIN_DMA_FQ :case IOMMU_DOMAIN_UNMANAGED :
@@ -4204,7 +4221,7 @@ static struct iommu_domain *intel_iommu_domain_alloc(unsigned type)static void intel_iommu_domain_free (struct iommu_domain *domain) { -if (domain != &si_domain->domain) +if (domain != &si_domain->domain && domain != &blocking_domain)domain_exit (to_dmar_domain (domain)); }
@@ -4274,12 +4291,6 @@ static int intel_iommu_attach_device(struct iommu_domain *domain,return domain_add_dev_info (to_dmar_domain (domain), dev); } -static void intel_iommu_detach_device (struct iommu_domain *domain, -struct device *dev) -{ -dmar_remove_one_dev_info (dev); -} -static int intel_iommu_map (struct iommu_domain *domain,unsigned long iova,phys_addr_t hpa,size_t size,int iommu_prot,gfp_t gfp)
@@ -4787,7 +4798,6 @@ const struct iommu_ops intel_iommu_ops = {#endif .default_domain_ops = &(const struct iommu_domain_ops) { .attach_dev = intel_iommu_attach_device, - .detach_dev = intel_iommu_detach_device, .map_pages = intel_iommu_map_pages, .unmap_pages = intel_iommu_unmap_pages, .iotlb_sync_map = intel_iommu_iotlb_sync_map,
Signature · 1 line
2.34.1
RE: [PATCH v3 3/7] iommu/vt-d: Add blocking domain support
Quoted 9 lines
From: Lu Baolu <[email protected]>
Sent: Monday, November 14, 2022 9:41 AMThe Intel IOMMU hardwares support blocking DMA transactions by clearing the translation table entries. This implements a real blocking domain to avoid using an empty UNMANAGED domain. The
detach_devcallback of the domain ops is not used in any path. Remove it to avoid dead code as well.Signed-off-by Lu Baolu <[email protected]>
Lu Baolu
maintainerPATCH v3 4/7 iommu/vt-d: Fold dmar_remove_one_dev_info() into its caller
In reply to Lu BaoluFold dmar_remove_one_dev_info() into intel_iommu_release_device() which is its only caller. Replace most of the code with device_block_translation() to make the code neat and tidy.
Rename iommu_disable_dev_iotlb() to iommu_disable_pci_caps() to pair with iommu_enable_pci_caps().
--- drivers/iommu/intel/iommu.c | 33 ++++++--------------------------- 1 file changed, 6 insertions(+), 27 deletions(-)
drivers/iommu/intel/iommu.c +6 -27
@@ -1443,7 +1443,7 @@ static void iommu_enable_pci_caps(struct device_domain_info *info) } } -static void iommu_disable_dev_iotlb (struct device_domain_info *info) +static void iommu_disable_pci_caps (struct device_domain_info *info) {struct pci_dev *pdev;
@@ -4089,30 +4089,6 @@ static void domain_context_clear(struct device_domain_info *info) &domain_context_clear_one_cb, info); } -static void dmar_remove_one_dev_info (struct device *dev) -{ -struct device_domain_info *info =dev_iommu_priv_get (dev); -struct dmar_domain *domain = info->domain; -struct intel_iommu *iommu = info->iommu; -unsigned long flags; - -if (!dev_is_real_dma_subdevice (info->dev)) { -if (dev_is_pci (info->dev) &&sm_supported (iommu)) -intel_pasid_tear_down_entry (iommu, info->dev, -PASID_RID2PASID , false); - -iommu_disable_dev_iotlb (info); -domain_context_clear (info); - } - -spin_lock_irqsave (&domain->lock, flags); -list_del (&info->link); -spin_unlock_irqrestore (&domain->lock, flags); - -domain_detach_iommu (domain, iommu); - info->domain =NULL ; -} -/* * Clear the page table pointer in context or pasid table entries so that * all DMA requests without PASID from the device are blocked. If the page
@@ -4124,7 +4100,7 @@ static void device_block_translation(struct device *dev)struct intel_iommu *iommu = info->iommu;unsigned long flags; -iommu_disable_dev_iotlb (info); +iommu_disable_pci_caps (info);if (!dev_is_real_dma_subdevice (dev)) {if (sm_supported (iommu)) intel_pasid_tear_down_entry(iommu, dev,
@@ -4562,7 +4538,10 @@ static void intel_iommu_release_device(struct device *dev) {struct device_domain_info *info =dev_iommu_priv_get (dev); -dmar_remove_one_dev_info (dev); +iommu_disable_pci_caps (info); +domain_context_clear (info); +device_block_translation (dev); +intel_pasid_free_table (dev);dev_iommu_priv_set (dev,NULL );kfree (info);
Signature · 1 line
2.34.1
RE: [PATCH v3 4/7] iommu/vt-d: Fold dmar_remove_one_dev_info() into its caller
drivers/iommu/intel/iommu.c static void intel_iommu_release_device(struct · line 4544
Quoted 11 lines
From: Lu Baolu <[email protected]>
Sent: Monday, November 14, 2022 9:41 AMdrivers/iommu/intel/iommu.c +3
-1@@ -4562,7 +4538,10 @@ static void intel_iommu_release_device(struct device *dev) {struct device_domain_info *info =dev_iommu_priv_get (dev); -dmar_remove_one_dev_info (dev); +iommu_disable_pci_caps (info); +domain_context_clear (info); +device_block_translation (dev);
clear context after blocking translation.
with that,
Baolu Lu
maintainerRe: [PATCH v3 4/7] iommu/vt-d: Fold dmar_remove_one_dev_info() into its caller
Quoted 7 lines · Kevin
Quoted 7 lines
From: Lu Baolu<[email protected]>
Sent: Monday, November 14, 2022 9:41 AMdrivers/iommu/intel/iommu.c +0
-0@@ -4562,7 +4538,10 @@ static void intel_iommu_release_device(struct device *dev) {struct device_domain_info *info =dev_iommu_priv_get (dev);
Quoted 5 lines
drivers/iommu/intel/iommu.c static void intel_iommu_release_device(struct device *dev) · line 4543
Quoted 4 lines
drivers/iommu/intel/iommu.c +3
-1-dmar_remove_one_dev_info (dev); +iommu_disable_pci_caps (info); +domain_context_clear (info); +device_block_translation (dev);clear context after blocking translation.
Unfortunately domain_context_clear() needs reference to info->domain (for domain id when flushing cache), which is cleared in device_block_translation().
Best regards,
baolu
RE: [PATCH v3 4/7] iommu/vt-d: Fold dmar_remove_one_dev_info() into its caller
Quoted 17 lines
From: Baolu Lu <[email protected]>
Sent: Wednesday, November 16, 2022 12:36 PMQuoted 7 lines · Kevin
Quoted 7 lines
From: Lu Baolu<[email protected]>
Sent: Monday, November 14, 2022 9:41 AMdrivers/iommu/intel/iommu.c +0
-0@@ -4562,7 +4538,10 @@ static void intel_iommu_release_device(struct device *dev) {struct device_domain_info *info =dev_iommu_priv_get (dev);Quoted 5 lines
drivers/iommu/intel/iommu.c static void intel_iommu_release_device(struct device *dev) · line 4543
Quoted 4 lines
drivers/iommu/intel/iommu.c +3
-1-dmar_remove_one_dev_info (dev); +iommu_disable_pci_caps (info); +domain_context_clear (info); +device_block_translation (dev);clear context after blocking translation.
Quoted 4 lines
Unfortunately
domain_context_clear()needs reference toinfo->domain(for domain id when flushing cache), which is cleared indevice_block_translation().
this sounds an ordering problem. clearing context should be after blocking translation in concept.
Baolu Lu
maintainerRe: [PATCH v3 4/7] iommu/vt-d: Fold dmar_remove_one_dev_info() into its caller
Quoted 16 lines · Kevin
Quoted 16 lines
From: Baolu Lu<[email protected]>
Sent: Wednesday, November 16, 2022 12:36 PMQuoted 12 lines · Kevin
drivers/iommu/intel/iommu.c static void intel_iommu_release_device(struct · line 4544
Quoted 11 lines
From: Lu Baolu<[email protected]>
Sent: Monday, November 14, 2022 9:41 AMdrivers/iommu/intel/iommu.c +3
-1@@ -4562,7 +4538,10 @@ static void intel_iommu_release_device(struct device *dev) {struct device_domain_info *info =dev_iommu_priv_get (dev); -dmar_remove_one_dev_info (dev); +iommu_disable_pci_caps (info); +domain_context_clear (info); +device_block_translation (dev);clear context after blocking translation.
Quoted 6 lines
Quoted 4 lines
Unfortunately
domain_context_clear()needs reference toinfo->domain(for domain id when flushing cache), which is cleared indevice_block_translation().this sounds an ordering problem. clearing context should be after blocking translation in concept.
At present, when the default domain is attached to the device, we first populate the pasid table entry, and then populate the device context entry. Above code is just the reverse operation.
Can you see any practical problems caused by this sequence? If so, it seems that we should carefully consider whether such problems already exist.
Best regards,
baolu
RE: [PATCH v3 4/7] iommu/vt-d: Fold dmar_remove_one_dev_info() into its caller
Quoted 28 lines
From: Baolu Lu <[email protected]>
Sent: Wednesday, November 16, 2022 4:03 PMQuoted 7 lines · Kevin
Quoted 7 lines
From: Baolu Lu<[email protected]>
Sent: Wednesday, November 16, 2022 12:36 PMQuoted 3 lines · Kevin
Review static void
Quoted 3 lines
From: Lu Baolu<[email protected]>
Sent: Monday, November 14, 2022 9:41 AM(quoted diff) +0
-0@@ -4562,7 +4538,10 @@ static voidintel_iommu_release_device(struct
Quoted 9 lines
Quoted 9 lines
Quoted 9 lines
drivers/iommu/intel/iommu.c static void intel_iommu_release_device(struct device *dev) · line 4543
Quoted 8 lines
drivers/iommu/intel/iommu.c +3
-1device *dev) {struct device_domain_info *info =dev_iommu_priv_get (dev); -dmar_remove_one_dev_info (dev); +iommu_disable_pci_caps (info); +domain_context_clear (info); +device_block_translation (dev);clear context after blocking translation.
Quoted 6 lines
Quoted 4 lines
Unfortunately
domain_context_clear()needs reference toinfo->domain(for domain id when flushing cache), which is cleared indevice_block_translation().this sounds an ordering problem. clearing context should be after blocking translation in concept.
Quoted 8 lines
At present, when the default domain is attached to the device, we first populate the pasid table entry, and then populate the device context entry. Above code is just the reverse operation.
Can you see any practical problems caused by this sequence? If so, it seems that we should carefully consider whether such problems already exist.
there is no problem with existing code. Just after this patch the order looks weird based on the literal name of those functions.
domain_context_clear() is a big hammer to disable the context entry, implying translation must be blocked. Then calling another block translation afterwards becomes unnecessary.
Probably it should be split into two functions with one requiring info->domain called before block translation and the rest which actually clears the context entry being the last step?
Baolu Lu
maintainerRe: [PATCH v3 4/7] iommu/vt-d: Fold dmar_remove_one_dev_info() into its caller
Quoted 40 lines · Kevin
Quoted 28 lines
From: Baolu Lu <[email protected]>
Sent: Wednesday, November 16, 2022 4:03 PMQuoted 7 lines · Kevin
Quoted 7 lines
From: Baolu Lu<[email protected]>
Sent: Wednesday, November 16, 2022 12:36 PMQuoted 3 lines · Kevin
Review static void
Quoted 3 lines
From: Lu Baolu<[email protected]>
Sent: Monday, November 14, 2022 9:41 AM(quoted diff) +0
-0@@ -4562,7 +4538,10 @@ static voidintel_iommu_release_device(struct
Quoted 9 lines
Quoted 9 lines
Quoted 9 lines
drivers/iommu/intel/iommu.c static void intel_iommu_release_device(struct device *dev) · line 4543
Quoted 8 lines
drivers/iommu/intel/iommu.c +3
-1device *dev) {struct device_domain_info *info =dev_iommu_priv_get (dev); -dmar_remove_one_dev_info (dev); +iommu_disable_pci_caps (info); +domain_context_clear (info); +device_block_translation (dev);clear context after blocking translation.
Quoted 6 lines
Quoted 4 lines
Unfortunately
domain_context_clear()needs reference toinfo->domain(for domain id when flushing cache), which is cleared indevice_block_translation().this sounds an ordering problem. clearing context should be after blocking translation in concept.
Quoted 8 lines
At present, when the default domain is attached to the device, we first populate the pasid table entry, and then populate the device context entry. Above code is just the reverse operation.
Can you see any practical problems caused by this sequence? If so, it seems that we should carefully consider whether such problems already exist.
there is no problem with existing code. Just after this patch the order looks weird based on the literal name of those functions.
Quoted 7 lines
domain_context_clear()is a big hammer to disable the context entry, implying translation must be blocked. Then calling another block translation afterwards becomes unnecessary.Probably it should be split into two functions with one requiring
info->domaincalled before block translation and the rest which actually clears the context entry being the last step?
This is what the existing code does. Perhaps I should drop this patch, or only rename iommu_disable_dev_iotlb() to iommu_disable_pci_caps().
Best regards,
baolu
Lu Baolu
maintainerPATCH v3 5/7 iommu/vt-d: Rename domain_add_dev_info()
In reply to Lu Baoludmar_domain_attach_device() is more meaningful according to what this helper does.
--- drivers/iommu/intel/iommu.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
drivers/iommu/intel/iommu.c +3 -2
@@ -2455,7 +2455,8 @@ static int __init si_domain_init(int hw)return 0 ; } -static int domain_add_dev_info (struct dmar_domain *domain,struct device *dev) +static int dmar_domain_attach_device (struct dmar_domain *domain, +struct device *dev) {struct device_domain_info *info =dev_iommu_priv_get (dev);struct intel_iommu *iommu;
@@ -4264,7 +4265,7 @@ static int intel_iommu_attach_device(struct iommu_domain *domain,if (ret)return ret; -return domain_add_dev_info (to_dmar_domain (domain), dev); +return dmar_domain_attach_device (to_dmar_domain (domain), dev); } static int intel_iommu_map(struct iommu_domain *domain,
Signature · 1 line
2.34.1
RE: [PATCH v3 5/7] iommu/vt-d: Rename domain_add_dev_info()
Quoted 7 lines
From: Lu Baolu <[email protected]>
Sent: Monday, November 14, 2022 9:41 AM
dmar_domain_attach_device()is more meaningful according to what this helper does.Signed-off-by Lu Baolu <[email protected]>
Lu Baolu
maintainerPATCH v3 6/7 iommu/vt-d: Remove unnecessary domain_context_mapped()
In reply to Lu BaoluThe device_domain_info::domain accurately records the domain attached to the device. It is unnecessary to check whether the context is present in the attach_dev path. Remove it to make the code neat.
--- drivers/iommu/intel/iommu.c | 47 +++---------------------------------- 1 file changed, 3 insertions(+), 44 deletions(-)
drivers/iommu/intel/iommu.c +3 -44
@@ -780,19 +780,6 @@ static void domain_flush_cache(struct dmar_domain *domain,clflush_cache_range (addr, size); } -static int device_context_mapped (struct intel_iommu *iommu,u8 bus,u8 devfn) -{ -struct context_entry *context; -int ret =0 ; - -spin_lock (&iommu->lock); - context =iommu_context_addr (iommu, bus, devfn,0 ); -if (context) - ret =context_present (context); -spin_unlock (&iommu->lock); -return ret; -} -static void free_context_table (struct intel_iommu *iommu) {struct context_entry *context;
@@ -2099,30 +2086,6 @@ domain_context_mapping(struct dmar_domain *domain, struct device *dev) &domain_context_mapping_cb, &data); } -static int domain_context_mapped_cb (struct pci_dev *pdev, -u16 alias,void *opaque) -{ -struct intel_iommu *iommu = opaque; - -return !device_context_mapped (iommu,PCI_BUS_NUM (alias), alias &0xff ); -} - -static int domain_context_mapped (struct device *dev) -{ -struct intel_iommu *iommu; -u8 bus, devfn; - - iommu =device_to_iommu (dev, &bus, &devfn); -if (!iommu) -return -ENODEV ; - -if (!dev_is_pci (dev)) -return device_context_mapped (iommu, bus, devfn); - -return !pci_for_each_dma_alias (to_pci_dev (dev), - domain_context_mapped_cb, iommu); -} -/* Returns a number of VTD pages, but aligned to MM page size */ static inline unsigned long aligned_nrpages (unsigned long host_addr,size_t size)
@@ -4245,6 +4208,7 @@ static int prepare_domain_attach_device(struct iommu_domain *domain,static int intel_iommu_attach_device (struct iommu_domain *domain,struct device *dev) { +struct device_domain_info *info =dev_iommu_priv_get (dev);int ret; if (domain->type == IOMMU_DOMAIN_UNMANAGED &&
@@ -4253,13 +4217,8 @@ static int intel_iommu_attach_device(struct iommu_domain *domain,return -EPERM ; } -/* normally dev is not mapped */ -if (unlikely (domain_context_mapped (dev))) { -struct device_domain_info *info =dev_iommu_priv_get (dev); - -if (info->domain) -device_block_translation (dev); - } +if (info->domain) +device_block_translation (dev); ret =prepare_domain_attach_device (domain, dev);if (ret)
Signature · 1 line
2.34.1
Lu Baolu
maintainerPATCH v3 7/7 iommu/vt-d: Use real field for indication of first level
In reply to Lu BaoluThe dmar_domain uses bit field members to indicate the behaviors. Add a bit field for using first level and remove the flags member to avoid duplication.
--- drivers/iommu/intel/iommu.h | 15 +++++---------- drivers/iommu/intel/iommu.c | 25 ++++++++++--------------- 2 files changed, 15 insertions(+), 25 deletions(-)
drivers/iommu/intel/iommu.h +5 -10
@@ -515,14 +515,6 @@ struct context_entry {u64 hi; }; -/* -* When VT-d works in the scalable mode, it allows DMA translation to -* happen through either first level or second level page table. This -* bit marks that the DMA translation for the domain goes through the -* first level page table, otherwise, it goes through the second level. -*/ -#define DOMAIN_FLAG_USE_FIRST_LEVEL BIT(1) -struct iommu_domain_info {struct intel_iommu *iommu;unsigned int refcnt;/* Refcount of devices per iommu */
@@ -539,6 +531,11 @@ struct dmar_domain { u8 iommu_coherency: 1; /* indicate coherency of iommu access */ u8 force_snooping : 1; /* Create IOPTEs with snoop control */ u8 set_pte_snp:1; + u8 use_first_level:1; /* DMA translation for the domain goes +* through the first level page table, +* otherwise, goes through the second +* level. +*/ spinlock_t lock;/* Protect device tracking lists */ struct list_head devices;/* all devices' list */
@@ -548,8 +545,6 @@ struct dmar_domain {/* adjusted guest address width, 0 is level 2 30-bit */ int agaw; - -int flags;/* flags to find out type of domain */ int iommu_superpage;/* Level of superpages supported: 0 == 4KiB (no superpages), 1 == 2MiB, 2 == 1GiB, 3 == 512GiB, 4 == 1TiB */
drivers/iommu/intel/iommu.c +10 -15
@@ -383,11 +383,6 @@ static inline int domain_type_is_si(struct dmar_domain *domain)return domain->domain.type ==IOMMU_DOMAIN_IDENTITY ; } -static inline bool domain_use_first_level (struct dmar_domain *domain) -{ -return domain->flags &DOMAIN_FLAG_USE_FIRST_LEVEL ; -} -static inline int domain_pfn_supported (struct dmar_domain *domain,unsigned long pfn) {
@@ -501,7 +496,7 @@ static int domain_update_iommu_superpage(struct dmar_domain *domain,rcu_read_lock ();for_each_active_iommu (iommu, drhd) {if (iommu != skip) { -if (domain &&domain_use_first_level (domain)) { +if (domain && domain->use_first_level) {if (!cap_fl1gp_support (iommu->cap)) mask =0x1 ; }else {
@@ -579,7 +574,7 @@ static void domain_update_iommu_cap(struct dmar_domain *domain)* paging and 57-bits with 5-level paging). Hence, skip bit * [N-1]. */ -if (domain_use_first_level (domain)) +if (domain->use_first_level) domain->domain.geometry.aperture_end =__DOMAIN_MAX_ADDR (domain->gaw -1 );else domain->domain.geometry.aperture_end =__DOMAIN_MAX_ADDR (domain->gaw);
@@ -947,7 +942,7 @@ static struct dma_pte *pfn_to_dma_pte(struct dmar_domain *domain,domain_flush_cache (domain, tmp_page,VTD_PAGE_SIZE ); pteval = ((uint64_t )virt_to_dma_pfn (tmp_page) <<VTD_PAGE_SHIFT ) |DMA_PTE_READ |DMA_PTE_WRITE ; -if (domain_use_first_level (domain)) { +if (domain->use_first_level) { pteval |=DMA_FL_PTE_XD |DMA_FL_PTE_US ;if (iommu_is_dma_domain (&domain->domain)) pteval |=DMA_FL_PTE_ACCESS ;
@@ -1500,7 +1495,7 @@ static void iommu_flush_iotlb_psi(struct intel_iommu *iommu,if (ih) ih =1 <<6 ; -if (domain_use_first_level (domain)) { +if (domain->use_first_level) {qi_flush_piotlb (iommu, did,PASID_RID2PASID , addr, pages, ih); }else {unsigned long bitmask = aligned_pages -1 ;
@@ -1554,7 +1549,7 @@ static inline void __mapping_notify_one(struct intel_iommu *iommu,* It's a non-present to present mapping. Only flush if caching mode * and second level. */ -if (cap_caching_mode (iommu->cap) && !domain_use_first_level (domain)) +if (cap_caching_mode (iommu->cap) && !domain->use_first_level)iommu_flush_iotlb_psi (iommu, domain, pfn, pages,0 ,1 );else iommu_flush_write_buffer (iommu);
@@ -1570,7 +1565,7 @@ static void intel_flush_iotlb_all(struct iommu_domain *domain)struct intel_iommu *iommu = info->iommu;u16 did =domain_id_iommu (dmar_domain, iommu); -if (domain_use_first_level (dmar_domain)) +if (dmar_domain->use_first_level)qi_flush_piotlb (iommu, did,PASID_RID2PASID ,0 ,-1 ,0 );else iommu->flush.flush_iotlb(iommu, did, 0, 0,
@@ -1743,7 +1738,7 @@ static struct dmar_domain *alloc_domain(unsigned int type) domain->nid =NUMA_NO_NODE ;if (first_level_by_default (type)) - domain->flags |=DOMAIN_FLAG_USE_FIRST_LEVEL ; + domain->use_first_level = true; domain->has_iotlb_device = false;INIT_LIST_HEAD (&domain->devices);spin_lock_init (&domain->lock);
@@ -2175,7 +2170,7 @@ __domain_mapping(struct dmar_domain *domain, unsigned long iov_pfn, attr = prot & (DMA_PTE_READ |DMA_PTE_WRITE |DMA_PTE_SNP ); attr |=DMA_FL_PTE_PRESENT ; -if (domain_use_first_level (domain)) { +if (domain->use_first_level) { attr |=DMA_FL_PTE_XD |DMA_FL_PTE_US |DMA_FL_PTE_ACCESS ;if (prot &DMA_PTE_WRITE ) attr |=DMA_FL_PTE_DIRTY ;
@@ -2445,7 +2440,7 @@ static int dmar_domain_attach_device(struct dmar_domain *domain,if (hw_pass_through &&domain_type_is_si (domain)) ret =intel_pasid_setup_pass_through (iommu, domain, dev,PASID_RID2PASID ); -else if (domain_use_first_level (domain)) +else if (domain->use_first_level) ret =domain_setup_first_level (iommu, domain, dev,PASID_RID2PASID );else
@@ -4388,7 +4383,7 @@ static void domain_set_force_snooping(struct dmar_domain *domain)* Second level page table supports per-PTE snoop control. The * iommu_map() interface will handle this by setting SNP bit. */ -if (!domain_use_first_level (domain)) { +if (!domain->use_first_level) { domain->set_pte_snp = true;return ; }
Signature · 1 line
2.34.1