Skip to contentSkip to conversation

doc: avoid meson deprecation in setup

PATCH In review Stephen Hemminger 6 participants 8 messages Nov 15, 2022 – Nov 22, 2022

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 doc: avoid meson deprecation in setup

The command "meson build" causes a deprecation warning with meson 0.64.0.
WARNING: Running the setup command as meson [options] instead of meson setup [options] is ambiguous and deprecated.

Therefore fix the examples in the documentation.

---
 doc/guides/cryptodevs/armv8.rst                  |  2 +-
 doc/guides/cryptodevs/uadk.rst                   |  2 +-
 doc/guides/freebsd_gsg/build_dpdk.rst            |  2 +-
 doc/guides/gpus/cuda.rst                         |  4 ++--
 doc/guides/howto/openwrt.rst                     |  4 ++--
 doc/guides/nics/ark.rst                          |  2 +-
 doc/guides/nics/mvneta.rst                       |  2 +-
 doc/guides/nics/mvpp2.rst                        |  2 +-
 doc/guides/platform/bluefield.rst                |  4 ++--
 doc/guides/platform/cnxk.rst                     |  4 ++--
 doc/guides/platform/octeontx.rst                 |  8 ++++----
 doc/guides/prog_guide/build-sdk-meson.rst        |  4 ++--
 doc/guides/prog_guide/lto.rst                    |  2 +-
 doc/guides/prog_guide/profile_app.rst            |  2 +-
 doc/guides/sample_app_ug/vm_power_management.rst | 14 ++++++--------
 15 files changed, 28 insertions(+), 30 deletions(-)
doc/guides/cryptodevs/armv8.rst +1 -1
index 8963f66a206c..1a006754cbe4 100644
@@ -47,7 +47,7 @@ To build DPDK with this virtual crypto PMD, the user is required to:
 
 .. code-block:: console
 
-   meson build
+   meson setup build
    ninja -C build
 
 The corresponding device can be created only if the following features
doc/guides/cryptodevs/uadk.rst +1 -1
index 1325eaca3f0a..9af6b88a5a54 100644
@@ -87,7 +87,7 @@ Test steps
 
       cd dpdk
       mkdir build
-      meson build (--reconfigure)
+      meson setup build (--reconfigure)
       cd build
       ninja
       sudo ninja install
doc/guides/freebsd_gsg/build_dpdk.rst +1 -1
index d335b97cfc1e..514d18c8700e 100644
@@ -44,7 +44,7 @@ Building DPDK
 The following commands can be used to build and install DPDK on a system.
 The final, install, step generally needs to be run as root::
 
-  meson build
+  meson setup build
   cd build
   ninja
   ninja install
doc/guides/gpus/cuda.rst +2 -2
index 55fc7d1e8626..dc5b0aa603c4 100644
@@ -25,7 +25,7 @@ Three ways:
 
 - Set ``export CFLAGS=-I/usr/local/cuda/include`` before building
 - Add CFLAGS in the meson command line ``CFLAGS=-I/usr/local/cuda/include meson build``
-- Add the ``-Dc_args`` in meson command line ``meson build -Dc_args=-I/usr/local/cuda/include``
+- Add the ``-Dc_args`` in meson command line ``meson setup build -Dc_args=-I/usr/local/cuda/include``
 
 If headers are not found, the CUDA GPU driver library is not built.
 
@@ -51,7 +51,7 @@ An example would be:
 
 .. code-block:: console
 
-  $ meson build -Dc_args="-I/usr/local/cuda/include -I/path/to/gdrcopy/include"
+  $ meson setup build -Dc_args="-I/usr/local/cuda/include -I/path/to/gdrcopy/include"
 
 If headers are not found, the CUDA GPU driver library is built without the CPU map capability
 and will return error if the application invokes the gpudev ``rte_gpu_mem_cpu_map`` function.
doc/guides/howto/openwrt.rst +2 -2
index e1d7db2a9054..8a9155ebf457 100644
@@ -100,8 +100,8 @@ first.
     ar = 'x86_64-openwrt-linux-ar'
     strip = 'x86_64-openwrt-linux-strip'
 
-    meson builddir --cross-file openwrt-cross
-    ninja -C builddir
+    meson setup build --cross-file openwrt-cross
+    ninja -C build
 
 Running DPDK application on OpenWrt
 -----------------------------------
doc/guides/nics/ark.rst +1 -1
index 591e41799ca0..ba00f14e8029 100644
@@ -282,7 +282,7 @@ CFLAGS environment prior to the meson build step. I.e.,
 .. code-block:: console
 
     export CFLAGS="-DRTE_LIBRTE_ARK_MIN_TX_PKTLEN=60"
-    meson build
+    meson setup build
 
 
 Supported ARK RTL PCIe Instances
doc/guides/nics/mvneta.rst +1 -1
index b7f279c3cb16..2ee2637a58f3 100644
@@ -117,7 +117,7 @@ Add path to libmusdk.pc in PKG_CONFIG_PATH environment variable.
 .. code-block:: console
 
    export PKG_CONFIG_PATH=$<musdk_install_dir>/lib/pkgconfig/:$PKG_CONFIG_PATH
-   meson build --cross-file config/arm/arm64_armada_linux_gcc
+   meson setup build --cross-file config/arm/arm64_armada_linux_gcc
    ninja -C build
 
 
doc/guides/nics/mvpp2.rst +1 -1
index e40fed72868c..cbfa47afd870 100644
@@ -133,7 +133,7 @@ Add path to libmusdk.pc in PKG_CONFIG_PATH environment variable.
 
    export PKG_CONFIG_PATH=$<musdk_install_dir>/lib/pkgconfig/:$PKG_CONFIG_PATH
 
-   meson build --cross-file config/arm/arm64_armada_linux_gcc
+   meson setup build --cross-file config/arm/arm64_armada_linux_gcc
    ninja -C build
 
 
doc/guides/platform/bluefield.rst +2 -2
index 3e3078c85e69..09486747b12f 100644
@@ -61,7 +61,7 @@ rdma-core library with corresponding kernel drivers is required.
 
 .. code-block:: console
 
-        meson build
+        meson setup build
         ninja -C build
 
 Cross Compilation
@@ -115,5 +115,5 @@ Then, untar the tarball at the cross toolchain directory on the x86 host.
 
 .. code-block:: console
 
-        meson build --cross-file config/arm/arm64_bluefield_linux_gcc
+        meson setup build --cross-file config/arm/arm64_bluefield_linux_gcc
         ninja -C build
doc/guides/platform/cnxk.rst +2 -2
index 562ed7d7a6cd..f2de6bb5963d 100644
@@ -606,14 +606,14 @@ CN9K:
 
 .. code-block:: console
 
-        meson build --cross-file config/arm/arm64_cn9k_linux_gcc
+        meson setup build --cross-file config/arm/arm64_cn9k_linux_gcc
         ninja -C build
 
 CN10K:
 
 .. code-block:: console
 
-        meson build --cross-file config/arm/arm64_cn10k_linux_gcc
+        meson setup build --cross-file config/arm/arm64_cn10k_linux_gcc
         ninja -C build
 
 .. note::
doc/guides/platform/octeontx.rst +4 -4
index 42ddb1762efa..1459dc7109be 100644
@@ -94,14 +94,14 @@ drivers can be compiled with the following steps,
 
 .. code-block:: console
 
-        meson build -Dexamples=<application>
+        meson setup build -Dexamples=<application>
         ninja -C build
 
 The example applications can be compiled using the following:
 
 .. code-block:: console
 
-        meson build -Dexamples=<application>
+        meson setup build -Dexamples=<application>
         ninja -C build
 
 Cross Compilation
@@ -127,7 +127,7 @@ Now this build system can be used to build applications for **OCTEON TX** :sup:`
 .. code-block:: console
 
         cd <dpdk directory>
-        meson build --cross-file config/arm/arm64_thunderx_linux_gcc
+        meson setup build --cross-file config/arm/arm64_thunderx_linux_gcc
         ninja -C build
 
 The example applications can be compiled using the following:
@@ -135,7 +135,7 @@ The example applications can be compiled using the following:
 .. code-block:: console
 
         cd <dpdk directory>
-        meson build --cross-file config/arm/arm64_thunderx_linux_gcc -Dexamples=<application>
+        meson setup build --cross-file config/arm/arm64_thunderx_linux_gcc -Dexamples=<application>
         ninja -C build
 
 .. note::
doc/guides/prog_guide/build-sdk-meson.rst +2 -2
index 58d9b553a0e2..c1d738e02f42 100644
@@ -9,7 +9,7 @@ Summary
 For many platforms, compiling and installing DPDK should work using the
 following set of commands::
 
-	meson build
+	meson setup build
 	cd build
 	ninja
 	ninja install
@@ -57,7 +57,7 @@ Configuring the Build
 ----------------------
 
 To configure a build, run the meson tool, passing the path to the directory
-to be used for the build e.g. ``meson build``, as shown above. If calling
+to be used for the build e.g. ``meson setup build``, as shown above. If calling
 meson from somewhere other than the root directory of the DPDK project the
 path to the root directory should be passed as the first parameter, and the
 build path as the second. For example, to build DPDK in /tmp/dpdk-build::
doc/guides/prog_guide/lto.rst +1 -1
index f79c449598b0..ff9f47a8f4ee 100644
@@ -30,4 +30,4 @@ Link time optimization can be enabled by setting meson built-in 'b_lto' option:
 
 .. code-block:: console
 
-    meson build -Db_lto=true
+    meson setup build -Db_lto=true
doc/guides/prog_guide/profile_app.rst +1 -1
index bd6700ef850b..0aff6c18a2ae 100644
@@ -42,7 +42,7 @@ and recompile the DPDK:
 
 .. code-block:: console
 
-   meson build
+   meson setup build
    meson configure build -Dc_args=-DRTE_ETHDEV_PROFILE_WITH_VTUNE
    ninja -C build
 
doc/guides/sample_app_ug/vm_power_management.rst +6 -8
index 9ce87956c9fb..ca7d38d0dfd1 100644
@@ -255,11 +255,10 @@ To build just the ``vm_power_manager`` application using ``meson``/``ninja``:
 .. code-block:: console
 
    cd dpdk
-   meson build
-   cd build
-   ninja
+   meson setup build
+   ninja -C build
    meson configure -Dexamples=vm_power_manager
-   ninja
+   ninja -C build
 
 The resulting binary is ``dpdk/build/examples/dpdk-vm_power_manager``.
 
@@ -494,11 +493,10 @@ To build just the ``vm_power_manager`` application using ``meson``/``ninja``:
 .. code-block:: console
 
    cd dpdk
-   meson build
-   cd build
-   ninja
+   meson setup build
+   ninja -C build
    meson configure -Dexamples=vm_power_manager/guest_cli
-   ninja
+   ninja -C build
 
 The resulting binary is ``dpdk/build/examples/guest_cli``.
 
Signature · 1 line
2.35.1
Acked-by on v1 1/1
#1 lore raw
Quoted 15 lines · Stephen Hemminger

The command "meson build" causes a deprecation warning with meson 0.64.0.
WARNING: Running the setup command as meson [options] instead of meson setup [options] is ambiguous and deprecated.

Therefore fix the examples in the documentation.

---
 doc/guides/cryptodevs/armv8.rst                  |  2 +-
 doc/guides/cryptodevs/uadk.rst                   |  2 +-
 doc/guides/freebsd_gsg/build_dpdk.rst            |  2 +-
 doc/guides/gpus/cuda.rst                         |  4 ++--
 doc/guides/howto/openwrt.rst                     |  4 ++--
 doc/guides/nics/ark.rst                          |  2 +-
 doc/guides/nics/mvneta.rst                       |  2 +-
 doc/guides/nics/mvpp2.rst                        |  2 +-
Quoted 9 lines
 doc/guides/platform/bluefield.rst                |  4 ++--
 doc/guides/platform/cnxk.rst                     |  4 ++--
 doc/guides/platform/octeontx.rst                 |  8 ++++----
 doc/guides/prog_guide/build-sdk-meson.rst        |  4 ++--
 doc/guides/prog_guide/lto.rst                    |  2 +-
 doc/guides/prog_guide/profile_app.rst            |  2 +-
 doc/guides/sample_app_ug/vm_power_management.rst | 14 ++++++--------
 15 files changed, 28 insertions(+), 30 deletions(-)

The fact that this needs to be changed in so many places is indicative that we need some cleanup in the docs - but then again, we knew that already! :-)

#2 lore raw
Quoted 26 lines · Bruce Richardson
Quoted 15 lines · Stephen Hemminger

The command "meson build" causes a deprecation warning with meson 0.64.0.
WARNING: Running the setup command as meson [options] instead of meson setup [options] is ambiguous and deprecated.

Therefore fix the examples in the documentation.

---
 doc/guides/cryptodevs/armv8.rst                  |  2 +-
 doc/guides/cryptodevs/uadk.rst                   |  2 +-
 doc/guides/freebsd_gsg/build_dpdk.rst            |  2 +-
 doc/guides/gpus/cuda.rst                         |  4 ++--
 doc/guides/howto/openwrt.rst                     |  4 ++--
 doc/guides/nics/ark.rst                          |  2 +-
 doc/guides/nics/mvneta.rst                       |  2 +-
 doc/guides/nics/mvpp2.rst                        |  2 +-
Quoted 9 lines
 doc/guides/platform/bluefield.rst                |  4 ++--
 doc/guides/platform/cnxk.rst                     |  4 ++--
 doc/guides/platform/octeontx.rst                 |  8 ++++----
 doc/guides/prog_guide/build-sdk-meson.rst        |  4 ++--
 doc/guides/prog_guide/lto.rst                    |  2 +-
 doc/guides/prog_guide/profile_app.rst            |  2 +-
 doc/guides/sample_app_ug/vm_power_management.rst | 14 ++++++--------
 15 files changed, 28 insertions(+), 30 deletions(-)
Quoted 6 lines

The fact that this needs to be changed in so many places is indicative that we need some cleanup in the docs - but then again, we knew that already! :-)

Indeed, and I see many places still showing the issue after the patch. Stephen, can you look at other guides?

Thanks!

Signature · 1 line
David Marchand
Acked-by on v1 1/1
#3 lore raw
In reply to Stephen Hemminger
Quoted 6 lines · Stephen Hemminger

The command "meson build" causes a deprecation warning with meson 0.64.0.
WARNING: Running the setup command as meson [options] instead of meson setup [options] is ambiguous and deprecated.

Therefore fix the examples in the documentation.

Thanks Stephen

For doc/guides/cryptodevs/uadk.rst

It will be great if updating https://core.dpdk.org/doc/quick-start/ as well, here is what I learned from.

Thanks

#4 lore raw
In reply to Stephen Hemminger

doc/guides/cryptodevs/armv8.rst

Quoted 43 lines

-----Original Message-----
From: Stephen Hemminger <[email protected]>
Sent: Wednesday, November 16, 2022 1:35 AM
To: [email protected]
Cc: Stephen Hemminger <[email protected]>; Ruifeng Wang <[email protected]>; Zhangfei Gao <[email protected]>; Bruce Richardson <[email protected]>; Elena Agostini <[email protected]>; Shepard Siegel <[email protected]>; Ed Czeck <[email protected]>; John Miller <[email protected]>; Zyta Szpak <[email protected]>; Liron Himi <[email protected]>; Nithin Dabilpuram <[email protected]>; Kiran Kumar K <[email protected]>; Sunil Kumar Kori <[email protected]>; Satha Rao <[email protected]>; David Hunt <[email protected]>
Subject: [PATCH] doc: avoid meson deprecation in setup

The command "meson build" causes a deprecation warning with meson 0.64.0.
WARNING:
Running the setup command as meson [options] instead of meson setup [options] is ambiguous and deprecated.

Therefore fix the examples in the documentation.

---
 doc/guides/cryptodevs/armv8.rst                  |  2 +-
 doc/guides/cryptodevs/uadk.rst                   |  2 +-
 doc/guides/freebsd_gsg/build_dpdk.rst            |  2 +-
 doc/guides/gpus/cuda.rst                         |  4 ++--
 doc/guides/howto/openwrt.rst                     |  4 ++--
 doc/guides/nics/ark.rst                          |  2 +-
 doc/guides/nics/mvneta.rst                       |  2 +-
 doc/guides/nics/mvpp2.rst                        |  2 +-
 doc/guides/platform/bluefield.rst                |  4 ++--
 doc/guides/platform/cnxk.rst                     |  4 ++--
 doc/guides/platform/octeontx.rst                 |  8 ++++----
 doc/guides/prog_guide/build-sdk-meson.rst        |  4 ++--
 doc/guides/prog_guide/lto.rst                    |  2 +-
 doc/guides/prog_guide/profile_app.rst            |  2 +-
 doc/guides/sample_app_ug/vm_power_management.rst | 14 ++++++--------
 15 files changed, 28 insertions(+), 30 deletions(-)
doc/guides/cryptodevs/armv8.rst index renamed from doc/guides/cryptodevs/armv8.rst +0 -0

8963f66a206c..1a006754cbe4 100644

doc/guides/cryptodevs/armv8.rst +0 -0

Change looks good to me. Thanks.
Some occurrences in doc/guides/linux_gsg/cross_build_dpdk_for_arm64.rst need update as well.

#5 lore raw

PATCH v2 1/1 doc: avoid meson deprecation in setup

In reply to Stephen Hemminger

From: Stephen Hemminger <[email protected]>

The command "meson build" causes a deprecation warning with meson 0.64.0.

WARNING: Running the setup command as meson [options] instead of
meson setup [options] is ambiguous and deprecated.

Therefore fix the examples in the documentation.

---
Changes since v1:
- fixed commitlog,
- dropped unrelated changes (and sometimes broken),
- fixed all (I am probably too optimistic) other occurences in the doc,

---
 doc/guides/cryptodevs/armv8.rst               |  2 +-
 doc/guides/cryptodevs/bcmfs.rst               |  2 +-
 doc/guides/cryptodevs/uadk.rst                |  2 +-
 doc/guides/freebsd_gsg/build_dpdk.rst         |  2 +-
 doc/guides/gpus/cuda.rst                      |  6 +--
 doc/guides/howto/openwrt.rst                  |  2 +-
 doc/guides/linux_gsg/build_dpdk.rst           |  8 ++--
 .../linux_gsg/cross_build_dpdk_for_arm64.rst  | 12 +++---
 .../cross_build_dpdk_for_loongarch.rst        |  2 +-
 .../linux_gsg/cross_build_dpdk_for_riscv.rst  |  4 +-
 doc/guides/nics/ark.rst                       |  2 +-
 doc/guides/nics/mvneta.rst                    |  2 +-
 doc/guides/nics/mvpp2.rst                     |  2 +-
 doc/guides/platform/bluefield.rst             |  4 +-
 doc/guides/platform/cnxk.rst                  |  8 ++--
 doc/guides/platform/octeontx.rst              |  8 ++--
 doc/guides/prog_guide/build-sdk-meson.rst     | 39 +++++++++++--------
 doc/guides/prog_guide/lto.rst                 |  2 +-
 doc/guides/prog_guide/profile_app.rst         |  4 +-
 .../sample_app_ug/vm_power_management.rst     |  4 +-
 doc/guides/windows_gsg/build_dpdk.rst         |  4 +-
 21 files changed, 63 insertions(+), 58 deletions(-)
doc/guides/cryptodevs/armv8.rst +1 -1
index 8963f66a20..1a006754cb 100644
@@ -47,7 +47,7 @@ To build DPDK with this virtual crypto PMD, the user is required to:
 
 .. code-block:: console
 
-   meson build
+   meson setup build
    ninja -C build
 
 The corresponding device can be created only if the following features
doc/guides/cryptodevs/bcmfs.rst +1 -1
index f5dcd59c87..d18a253913 100644
@@ -70,7 +70,7 @@ for cross compiling on x86 platform.
 .. code-block:: console
 
     cd <DPDK-source-directory>
-    meson <dest-dir> --cross-file config/arm/arm64_stingray_linux_gcc
+    meson setup <dest-dir> --cross-file config/arm/arm64_stingray_linux_gcc
     cd <dest-dir>
     ninja
 
doc/guides/cryptodevs/uadk.rst +1 -1
index 1325eaca3f..9af6b88a5a 100644
@@ -87,7 +87,7 @@ Test steps
 
       cd dpdk
       mkdir build
-      meson build (--reconfigure)
+      meson setup build (--reconfigure)
       cd build
       ninja
       sudo ninja install
doc/guides/freebsd_gsg/build_dpdk.rst +1 -1
index d335b97cfc..514d18c870 100644
@@ -44,7 +44,7 @@ Building DPDK
 The following commands can be used to build and install DPDK on a system.
 The final, install, step generally needs to be run as root::
 
-  meson build
+  meson setup build
   cd build
   ninja
   ninja install
doc/guides/gpus/cuda.rst +3 -3
index 55fc7d1e86..114e3bc8cb 100644
@@ -24,8 +24,8 @@ You need to indicate to meson where CUDA headers files are through the CFLAGS va
 Three ways:
 
 - Set ``export CFLAGS=-I/usr/local/cuda/include`` before building
-- Add CFLAGS in the meson command line ``CFLAGS=-I/usr/local/cuda/include meson build``
-- Add the ``-Dc_args`` in meson command line ``meson build -Dc_args=-I/usr/local/cuda/include``
+- Add CFLAGS in the meson command line ``CFLAGS=-I/usr/local/cuda/include meson setup build``
+- Add the ``-Dc_args`` in meson command line ``meson setup build -Dc_args=-I/usr/local/cuda/include``
 
 If headers are not found, the CUDA GPU driver library is not built.
 
@@ -51,7 +51,7 @@ An example would be:
 
 .. code-block:: console
 
-  $ meson build -Dc_args="-I/usr/local/cuda/include -I/path/to/gdrcopy/include"
+  $ meson setup build -Dc_args="-I/usr/local/cuda/include -I/path/to/gdrcopy/include"
 
 If headers are not found, the CUDA GPU driver library is built without the CPU map capability
 and will return error if the application invokes the gpudev ``rte_gpu_mem_cpu_map`` function.
doc/guides/howto/openwrt.rst +1 -1
index e1d7db2a90..be902c505f 100644
@@ -100,7 +100,7 @@ first.
     ar = 'x86_64-openwrt-linux-ar'
     strip = 'x86_64-openwrt-linux-strip'
 
-    meson builddir --cross-file openwrt-cross
+    meson setup builddir --cross-file openwrt-cross
     ninja -C builddir
 
 Running DPDK application on OpenWrt
doc/guides/linux_gsg/build_dpdk.rst +4 -4
index 4f2def15ed..bbd2efc9d8 100644
@@ -53,7 +53,7 @@ To configure a DPDK build use:
 
 .. code-block:: console
 
-     meson <options> build
+     meson setup <options> build
 
 where "build" is the desired output build directory, and "<options>" can be
 empty or one of a number of meson or DPDK-specific build options, described
@@ -140,7 +140,7 @@ automatically built as part of a meson build too.
 To do so, pass a comma-separated list of the examples to build to the
 `-Dexamples` meson option as below::
 
-  meson -Dexamples=l2fwd,l3fwd build
+  meson setup -Dexamples=l2fwd,l3fwd build
 
 As with other meson options, this can also be set post-initial-config using `meson configure` in the build directory.
 There is also a special value "all" to request that all example applications whose
@@ -166,12 +166,12 @@ The following meson command can be used on RHEL/Fedora systems to configure a 32
 assuming the relevant 32-bit development packages, such as a 32-bit libc, are installed::
 
   PKG_CONFIG_LIBDIR=/usr/lib/pkgconfig \
-      meson -Dc_args='-m32' -Dc_link_args='-m32' build
+      meson setup -Dc_args='-m32' -Dc_link_args='-m32' build
 
 For Debian/Ubuntu systems, the equivalent command is::
 
   PKG_CONFIG_LIBDIR=/usr/lib/i386-linux-gnu/pkgconfig \
-      meson -Dc_args='-m32' -Dc_link_args='-m32' build
+      meson setup -Dc_args='-m32' -Dc_link_args='-m32' build
 
 Once the build directory has been configured,
 DPDK can be compiled using ``ninja`` as described above.
doc/guides/linux_gsg/cross_build_dpdk_for_arm64.rst +6 -6
index cbe9d171f8..e4de5c8d18 100644
@@ -167,19 +167,19 @@ Cross Compiling DPDK with GNU toolchain using Meson
 To cross-compile DPDK on a desired target machine we can use the following
 command::
 
-   meson cross-build --cross-file <target_machine_configuration>
+   meson setup cross-build --cross-file <target_machine_configuration>
    ninja -C cross-build
 
 For example if the target machine is aarch64 we can use the following
 command, provided the cross file has been modified accordingly::
 
-   meson aarch64-build-gcc --cross-file config/arm/arm64_armv8_linux_gcc
+   meson setup aarch64-build-gcc --cross-file config/arm/arm64_armv8_linux_gcc
    ninja -C aarch64-build-gcc
 
 If the target machine is aarch32 we can use the following command,
 provided the cross file has been modified accordingly::
 
-   meson aarch32-build --cross-file config/arm/arm32_armv8_linux_gcc
+   meson setup aarch32-build --cross-file config/arm/arm32_armv8_linux_gcc
    ninja -C aarch32-build
 
 LLVM/Clang toolchain
@@ -230,7 +230,7 @@ Assuming the file with augmented ``c_args`` and ``c_link_args``
 is named ``arm64_armv8_linux_clang``,
 use the following command to cross-compile DPDK for the target machine::
 
-   meson aarch64-build-clang --cross-file config/arm/arm64_armv8_linux_clang
+   meson setup aarch64-build-clang --cross-file config/arm/arm64_armv8_linux_clang
    ninja -C aarch64-build-clang
 
 Cross Compiling DPDK with LLVM/Clang toolchain using Meson on Ubuntu 18.04
@@ -247,7 +247,7 @@ On Ubuntu 18.04, these packages are needed:
 
 Use the following command to cross-compile DPDK for the target machine::
 
-   meson aarch64-build-clang --cross-file config/arm/arm64_armv8_linux_clang_ubuntu1804
+   meson setup aarch64-build-clang --cross-file config/arm/arm64_armv8_linux_clang_ubuntu1804
    ninja -C aarch64-build-clang
 
 Building for an aarch64 SoC on an aarch64 build machine
@@ -258,7 +258,7 @@ you don't need a separate cross toolchain, just a different set of
 configuration options. To build for an aarch64 SoC, use the -Dplatform meson
 option::
 
-   meson soc_build -Dplatform=<target_soc>
+   meson setup soc_build -Dplatform=<target_soc>
 
 Substitute <target_soc> with one of the supported SoCs
 
doc/guides/linux_gsg/cross_build_dpdk_for_loongarch.rst +1 -1
index 1549cc86d5..7f75960e9e 100644
@@ -81,7 +81,7 @@ To cross-compile DPDK for generic LoongArch we can use the following command:
 
 .. code-block:: console
 
-   meson cross-build --cross-file config/loongarch/loongarch_loongarch64_linux_gcc
+   meson setup cross-build --cross-file config/loongarch/loongarch_loongarch64_linux_gcc
    ninja -C cross-build
 
 Supported cross-compilation targets
doc/guides/linux_gsg/cross_build_dpdk_for_riscv.rst +2 -2
index 9e121645a8..7d7f7ac72b 100644
@@ -68,13 +68,13 @@ Cross Compiling DPDK with GNU toolchain using Meson
 
 To cross-compile DPDK for a desired target machine use the following command::
 
-   meson cross-build --cross-file <target_machine_configuration>
+   meson setup cross-build --cross-file <target_machine_configuration>
    ninja -C cross-build
 
 For example if the target machine is a generic rv64gc RISC-V, use the following
 command::
 
-   meson riscv64-build-gcc --cross-file config/riscv/riscv64_linux_gcc
+   meson setup riscv64-build-gcc --cross-file config/riscv/riscv64_linux_gcc
    ninja -C riscv64-build-gcc
 
 If riscv-gnu-toolchain is used, binary names should be updated to match. Update
doc/guides/nics/ark.rst +1 -1
index 591e41799c..ba00f14e80 100644
@@ -282,7 +282,7 @@ CFLAGS environment prior to the meson build step. I.e.,
 .. code-block:: console
 
     export CFLAGS="-DRTE_LIBRTE_ARK_MIN_TX_PKTLEN=60"
-    meson build
+    meson setup build
 
 
 Supported ARK RTL PCIe Instances
doc/guides/nics/mvneta.rst +1 -1
index b7f279c3cb..2ee2637a58 100644
@@ -117,7 +117,7 @@ Add path to libmusdk.pc in PKG_CONFIG_PATH environment variable.
 .. code-block:: console
 
    export PKG_CONFIG_PATH=$<musdk_install_dir>/lib/pkgconfig/:$PKG_CONFIG_PATH
-   meson build --cross-file config/arm/arm64_armada_linux_gcc
+   meson setup build --cross-file config/arm/arm64_armada_linux_gcc
    ninja -C build
 
 
doc/guides/nics/mvpp2.rst +1 -1
index e40fed7286..cbfa47afd8 100644
@@ -133,7 +133,7 @@ Add path to libmusdk.pc in PKG_CONFIG_PATH environment variable.
 
    export PKG_CONFIG_PATH=$<musdk_install_dir>/lib/pkgconfig/:$PKG_CONFIG_PATH
 
-   meson build --cross-file config/arm/arm64_armada_linux_gcc
+   meson setup build --cross-file config/arm/arm64_armada_linux_gcc
    ninja -C build
 
 
doc/guides/platform/bluefield.rst +2 -2
index 3e3078c85e..09486747b1 100644
@@ -61,7 +61,7 @@ rdma-core library with corresponding kernel drivers is required.
 
 .. code-block:: console
 
-        meson build
+        meson setup build
         ninja -C build
 
 Cross Compilation
@@ -115,5 +115,5 @@ Then, untar the tarball at the cross toolchain directory on the x86 host.
 
 .. code-block:: console
 
-        meson build --cross-file config/arm/arm64_bluefield_linux_gcc
+        meson setup build --cross-file config/arm/arm64_bluefield_linux_gcc
         ninja -C build
doc/guides/platform/cnxk.rst +4 -4
index 562ed7d7a6..aadd60b5d4 100644
@@ -587,14 +587,14 @@ CN9K:
 
 .. code-block:: console
 
-        meson -Dplatform=cn9k build
+        meson setup -Dplatform=cn9k build
         ninja -C build
 
 CN10K:
 
 .. code-block:: console
 
-        meson -Dplatform=cn10k build
+        meson setup -Dplatform=cn10k build
         ninja -C build
 
 Cross Compilation
@@ -606,14 +606,14 @@ CN9K:
 
 .. code-block:: console
 
-        meson build --cross-file config/arm/arm64_cn9k_linux_gcc
+        meson setup build --cross-file config/arm/arm64_cn9k_linux_gcc
         ninja -C build
 
 CN10K:
 
 .. code-block:: console
 
-        meson build --cross-file config/arm/arm64_cn10k_linux_gcc
+        meson setup build --cross-file config/arm/arm64_cn10k_linux_gcc
         ninja -C build
 
 .. note::
doc/guides/platform/octeontx.rst +4 -4
index 42ddb1762e..1459dc7109 100644
@@ -94,14 +94,14 @@ drivers can be compiled with the following steps,
 
 .. code-block:: console
 
-        meson build -Dexamples=<application>
+        meson setup build -Dexamples=<application>
         ninja -C build
 
 The example applications can be compiled using the following:
 
 .. code-block:: console
 
-        meson build -Dexamples=<application>
+        meson setup build -Dexamples=<application>
         ninja -C build
 
 Cross Compilation
@@ -127,7 +127,7 @@ Now this build system can be used to build applications for **OCTEON TX** :sup:`
 .. code-block:: console
 
         cd <dpdk directory>
-        meson build --cross-file config/arm/arm64_thunderx_linux_gcc
+        meson setup build --cross-file config/arm/arm64_thunderx_linux_gcc
         ninja -C build
 
 The example applications can be compiled using the following:
@@ -135,7 +135,7 @@ The example applications can be compiled using the following:
 .. code-block:: console
 
         cd <dpdk directory>
-        meson build --cross-file config/arm/arm64_thunderx_linux_gcc -Dexamples=<application>
+        meson setup build --cross-file config/arm/arm64_thunderx_linux_gcc -Dexamples=<application>
         ninja -C build
 
 .. note::
doc/guides/prog_guide/build-sdk-meson.rst +22 -17
index 58d9b553a0..5deabbe54c 100644
@@ -9,7 +9,7 @@ Summary
 For many platforms, compiling and installing DPDK should work using the
 following set of commands::
 
-	meson build
+	meson setup build
 	cd build
 	ninja
 	ninja install
@@ -57,12 +57,12 @@ Configuring the Build
 ----------------------
 
 To configure a build, run the meson tool, passing the path to the directory
-to be used for the build e.g. ``meson build``, as shown above. If calling
+to be used for the build e.g. ``meson setup build``, as shown above. If calling
 meson from somewhere other than the root directory of the DPDK project the
 path to the root directory should be passed as the first parameter, and the
 build path as the second. For example, to build DPDK in /tmp/dpdk-build::
 
-	user@host:/tmp$ meson ~user/dpdk dpdk-build
+	user@host:/tmp$ meson setup ~user/dpdk dpdk-build
 
 Meson will then configure the build based on settings in the project's
 meson.build files, and by checking the build environment for e.g. compiler
@@ -80,24 +80,29 @@ available run ``meson configure`` in the build directory.
 Examples of adjusting the defaults when doing initial meson configuration.
 Project-specific options are passed used -Doption=value::
 
-	meson --werror werrorbuild  # build with warnings as errors
+	# build with warnings as errors
+	meson setup --werror werrorbuild
 
-	meson --buildtype=debug debugbuild  # build for debugging
+	# build for debugging
+	meson setup --buildtype=debug debugbuild
 
-	meson -Dexamples=l3fwd,l2fwd fwdbuild  # build some examples as
-					# part of the normal DPDK build
+	# build some examples as part of the normal DPDK build
+	meson setup -Dexamples=l3fwd,l2fwd fwdbuild
 
-	meson -Dmax_lcores=8 smallbuild  # scale build for smaller systems
+	# scale build for smaller systems
+	meson setup -Dmax_lcores=8 smallbuild
 
-	meson -Denable_docs=true fullbuild  # build and install docs
+	# build and install docs
+	meson setup -Denable_docs=true fullbuild
 
-	meson -Dcpu_instruction_set=generic  # use builder-independent baseline -march
+	# use builder-independent baseline -march
+	meson setup -Dcpu_instruction_set=generic
 
-	meson -Ddisable_drivers=event/*,net/tap  # disable tap driver and all
-					# eventdev PMDs for a smaller build
+	# disable tap driver and all eventdev PMDs for a smaller build
+	meson setup -Ddisable_drivers=event/*,net/tap
 
-	meson -Denable_trace_fp=true tracebuild # build with fast path traces
-					# enabled
+	# build with fast path traces enabled
+	meson setup -Denable_trace_fp=true tracebuild
 
 Examples of setting some of the same options using meson configure::
 
@@ -135,7 +140,7 @@ As well as those settings taken from ``meson configure``, other options
 such as the compiler to use can be passed via environment variables. For
 example::
 
-	CC=clang meson clang-build
+	CC=clang meson setup clang-build
 
 .. note::
 
@@ -188,12 +193,12 @@ Cross Compiling DPDK
 To cross-compile DPDK on a desired target machine we can use the following
 command::
 
-	meson cross-build --cross-file <target_machine_configuration>
+	meson setup cross-build --cross-file <target_machine_configuration>
 
 For example if the target machine is arm64 we can use the following
 command::
 
-        meson arm-build --cross-file config/arm/arm64_armv8_linux_gcc
+        meson setup arm-build --cross-file config/arm/arm64_armv8_linux_gcc
 
 where config/arm/arm64_armv8_linux_gcc contains settings for the compilers
 and other build tools to be used, as well as characteristics of the target
doc/guides/prog_guide/lto.rst +1 -1
index f79c449598..ff9f47a8f4 100644
@@ -30,4 +30,4 @@ Link time optimization can be enabled by setting meson built-in 'b_lto' option:
 
 .. code-block:: console
 
-    meson build -Db_lto=true
+    meson setup build -Db_lto=true
doc/guides/prog_guide/profile_app.rst +2 -2
index bd6700ef85..14292d4c25 100644
@@ -42,7 +42,7 @@ and recompile the DPDK:
 
 .. code-block:: console
 
-   meson build
+   meson setup build
    meson configure build -Dc_args=-DRTE_ETHDEV_PROFILE_WITH_VTUNE
    ninja -C build
 
@@ -103,7 +103,7 @@ Example:
 
 .. code-block:: console
 
-   meson --cross config/arm/arm64_armv8_linux_gcc -Dc_args='-DRTE_ARM_EAL_RDTSC_USE_PMU' build
+   meson setup --cross config/arm/arm64_armv8_linux_gcc -Dc_args='-DRTE_ARM_EAL_RDTSC_USE_PMU' build
 
 .. warning::
 
doc/guides/sample_app_ug/vm_power_management.rst +2 -2
index 9ce87956c9..e0af729e66 100644
@@ -255,7 +255,7 @@ To build just the ``vm_power_manager`` application using ``meson``/``ninja``:
 .. code-block:: console
 
    cd dpdk
-   meson build
+   meson setup build
    cd build
    ninja
    meson configure -Dexamples=vm_power_manager
@@ -494,7 +494,7 @@ To build just the ``vm_power_manager`` application using ``meson``/``ninja``:
 .. code-block:: console
 
    cd dpdk
-   meson build
+   meson setup build
    cd build
    ninja
    meson configure -Dexamples=vm_power_manager/guest_cli
doc/guides/windows_gsg/build_dpdk.rst +2 -2
index 38b3068d7b..29f2b38feb 100644
@@ -104,7 +104,7 @@ To compile the examples, the flag ``-Dexamples`` is required.
 .. code-block:: console
 
     cd C:\Users\me\dpdk
-    meson -Dexamples=helloworld build
+    meson setup -Dexamples=helloworld build
     ninja -C build
 
 Option 2. Cross-Compile with MinGW-w64
@@ -115,5 +115,5 @@ Depending on the distribution, paths in this file may need adjustments.
 
 .. code-block:: console
 
-    meson --cross-file config/x86/cross-mingw -Dexamples=helloworld build
+    meson setup --cross-file config/x86/cross-mingw -Dexamples=helloworld build
     ninja -C build
Signature · 1 line
2.38.1
Acked-by on v2 1/1
#6 lore raw
Quoted 248 lines · David Marchand

From: Stephen Hemminger <[email protected]>

The command "meson build" causes a deprecation warning with meson 0.64.0.

WARNING: Running the setup command as meson [options] instead of
meson setup [options] is ambiguous and deprecated.

Therefore fix the examples in the documentation.

---
Changes since v1:
- fixed commitlog,
- dropped unrelated changes (and sometimes broken),
- fixed all (I am probably too optimistic) other occurences in the doc,

---
 doc/guides/cryptodevs/armv8.rst               |  2 +-
 doc/guides/cryptodevs/bcmfs.rst               |  2 +-
 doc/guides/cryptodevs/uadk.rst                |  2 +-
 doc/guides/freebsd_gsg/build_dpdk.rst         |  2 +-
 doc/guides/gpus/cuda.rst                      |  6 +--
 doc/guides/howto/openwrt.rst                  |  2 +-
 doc/guides/linux_gsg/build_dpdk.rst           |  8 ++--
 .../linux_gsg/cross_build_dpdk_for_arm64.rst  | 12 +++---
 .../cross_build_dpdk_for_loongarch.rst        |  2 +-
 .../linux_gsg/cross_build_dpdk_for_riscv.rst  |  4 +-
 doc/guides/nics/ark.rst                       |  2 +-
 doc/guides/nics/mvneta.rst                    |  2 +-
 doc/guides/nics/mvpp2.rst                     |  2 +-
 doc/guides/platform/bluefield.rst             |  4 +-
 doc/guides/platform/cnxk.rst                  |  8 ++--
 doc/guides/platform/octeontx.rst              |  8 ++--
 doc/guides/prog_guide/build-sdk-meson.rst     | 39 +++++++++++--------
 doc/guides/prog_guide/lto.rst                 |  2 +-
 doc/guides/prog_guide/profile_app.rst         |  4 +-
 .../sample_app_ug/vm_power_management.rst     |  4 +-
 doc/guides/windows_gsg/build_dpdk.rst         |  4 +-
 21 files changed, 63 insertions(+), 58 deletions(-)
doc/guides/cryptodevs/armv8.rst +1 -1
index 8963f66a20..1a006754cb 100644
@@ -47,7 +47,7 @@ To build DPDK with this virtual crypto PMD, the user is required to:
 
 .. code-block:: console
 
-   meson build
+   meson setup build
    ninja -C build
 
 The corresponding device can be created only if the following features
doc/guides/cryptodevs/bcmfs.rst +1 -1
index f5dcd59c87..d18a253913 100644
@@ -70,7 +70,7 @@ for cross compiling on x86 platform.
 .. code-block:: console
 
     cd <DPDK-source-directory>
-    meson <dest-dir> --cross-file config/arm/arm64_stingray_linux_gcc
+    meson setup <dest-dir> --cross-file config/arm/arm64_stingray_linux_gcc
     cd <dest-dir>
     ninja
 
doc/guides/cryptodevs/uadk.rst +1 -1
index 1325eaca3f..9af6b88a5a 100644
@@ -87,7 +87,7 @@ Test steps
 
       cd dpdk
       mkdir build
-      meson build (--reconfigure)
+      meson setup build (--reconfigure)
       cd build
       ninja
       sudo ninja install
doc/guides/freebsd_gsg/build_dpdk.rst +1 -1
index d335b97cfc..514d18c870 100644
@@ -44,7 +44,7 @@ Building DPDK
 The following commands can be used to build and install DPDK on a system.
 The final, install, step generally needs to be run as root::
 
-  meson build
+  meson setup build
   cd build
   ninja
   ninja install
doc/guides/gpus/cuda.rst +3 -3
index 55fc7d1e86..114e3bc8cb 100644
@@ -24,8 +24,8 @@ You need to indicate to meson where CUDA headers files are through the CFLAGS va
 Three ways:
 
 - Set ``export CFLAGS=-I/usr/local/cuda/include`` before building
-- Add CFLAGS in the meson command line ``CFLAGS=-I/usr/local/cuda/include meson build``
-- Add the ``-Dc_args`` in meson command line ``meson build -Dc_args=-I/usr/local/cuda/include``
+- Add CFLAGS in the meson command line ``CFLAGS=-I/usr/local/cuda/include meson setup build``
+- Add the ``-Dc_args`` in meson command line ``meson setup build -Dc_args=-I/usr/local/cuda/include``
 
 If headers are not found, the CUDA GPU driver library is not built.
 
@@ -51,7 +51,7 @@ An example would be:
 
 .. code-block:: console
 
-  $ meson build -Dc_args="-I/usr/local/cuda/include -I/path/to/gdrcopy/include"
+  $ meson setup build -Dc_args="-I/usr/local/cuda/include -I/path/to/gdrcopy/include"
 
 If headers are not found, the CUDA GPU driver library is built without the CPU map capability
 and will return error if the application invokes the gpudev ``rte_gpu_mem_cpu_map`` function.
doc/guides/howto/openwrt.rst +1 -1
index e1d7db2a90..be902c505f 100644
@@ -100,7 +100,7 @@ first.
     ar = 'x86_64-openwrt-linux-ar'
     strip = 'x86_64-openwrt-linux-strip'
 
-    meson builddir --cross-file openwrt-cross
+    meson setup builddir --cross-file openwrt-cross
     ninja -C builddir
 
 Running DPDK application on OpenWrt
doc/guides/linux_gsg/build_dpdk.rst +4 -4
index 4f2def15ed..bbd2efc9d8 100644
@@ -53,7 +53,7 @@ To configure a DPDK build use:
 
 .. code-block:: console
 
-     meson <options> build
+     meson setup <options> build
 
 where "build" is the desired output build directory, and "<options>" can be
 empty or one of a number of meson or DPDK-specific build options, described
@@ -140,7 +140,7 @@ automatically built as part of a meson build too.
 To do so, pass a comma-separated list of the examples to build to the
 `-Dexamples` meson option as below::
 
-  meson -Dexamples=l2fwd,l3fwd build
+  meson setup -Dexamples=l2fwd,l3fwd build
 
 As with other meson options, this can also be set post-initial-config using `meson configure` in the build directory.
 There is also a special value "all" to request that all example applications whose
@@ -166,12 +166,12 @@ The following meson command can be used on RHEL/Fedora systems to configure a 32
 assuming the relevant 32-bit development packages, such as a 32-bit libc, are installed::
 
   PKG_CONFIG_LIBDIR=/usr/lib/pkgconfig \
-      meson -Dc_args='-m32' -Dc_link_args='-m32' build
+      meson setup -Dc_args='-m32' -Dc_link_args='-m32' build
 
 For Debian/Ubuntu systems, the equivalent command is::
 
   PKG_CONFIG_LIBDIR=/usr/lib/i386-linux-gnu/pkgconfig \
-      meson -Dc_args='-m32' -Dc_link_args='-m32' build
+      meson setup -Dc_args='-m32' -Dc_link_args='-m32' build
 
 Once the build directory has been configured,
 DPDK can be compiled using ``ninja`` as described above.
doc/guides/linux_gsg/cross_build_dpdk_for_arm64.rst +6 -6
index cbe9d171f8..e4de5c8d18 100644
@@ -167,19 +167,19 @@ Cross Compiling DPDK with GNU toolchain using Meson
 To cross-compile DPDK on a desired target machine we can use the following
 command::
 
-   meson cross-build --cross-file <target_machine_configuration>
+   meson setup cross-build --cross-file <target_machine_configuration>
    ninja -C cross-build
 
 For example if the target machine is aarch64 we can use the following
 command, provided the cross file has been modified accordingly::
 
-   meson aarch64-build-gcc --cross-file config/arm/arm64_armv8_linux_gcc
+   meson setup aarch64-build-gcc --cross-file config/arm/arm64_armv8_linux_gcc
    ninja -C aarch64-build-gcc
 
 If the target machine is aarch32 we can use the following command,
 provided the cross file has been modified accordingly::
 
-   meson aarch32-build --cross-file config/arm/arm32_armv8_linux_gcc
+   meson setup aarch32-build --cross-file config/arm/arm32_armv8_linux_gcc
    ninja -C aarch32-build
 
 LLVM/Clang toolchain
@@ -230,7 +230,7 @@ Assuming the file with augmented ``c_args`` and ``c_link_args``
 is named ``arm64_armv8_linux_clang``,
 use the following command to cross-compile DPDK for the target machine::
 
-   meson aarch64-build-clang --cross-file config/arm/arm64_armv8_linux_clang
+   meson setup aarch64-build-clang --cross-file config/arm/arm64_armv8_linux_clang
    ninja -C aarch64-build-clang
 
 Cross Compiling DPDK with LLVM/Clang toolchain using Meson on Ubuntu 18.04
@@ -247,7 +247,7 @@ On Ubuntu 18.04, these packages are needed:
 
 Use the following command to cross-compile DPDK for the target machine::
 
-   meson aarch64-build-clang --cross-file config/arm/arm64_armv8_linux_clang_ubuntu1804
+   meson setup aarch64-build-clang --cross-file config/arm/arm64_armv8_linux_clang_ubuntu1804
    ninja -C aarch64-build-clang
 
 Building for an aarch64 SoC on an aarch64 build machine
@@ -258,7 +258,7 @@ you don't need a separate cross toolchain, just a different set of
 configuration options. To build for an aarch64 SoC, use the -Dplatform meson
 option::
 
-   meson soc_build -Dplatform=<target_soc>
+   meson setup soc_build -Dplatform=<target_soc>
 
 Substitute <target_soc> with one of the supported SoCs
 
doc/guides/linux_gsg/cross_build_dpdk_for_loongarch.rst +1 -1
index 1549cc86d5..7f75960e9e 100644
@@ -81,7 +81,7 @@ To cross-compile DPDK for generic LoongArch we can use the following command:
 
 .. code-block:: console
 
-   meson cross-build --cross-file config/loongarch/loongarch_loongarch64_linux_gcc
+   meson setup cross-build --cross-file config/loongarch/loongarch_loongarch64_linux_gcc
    ninja -C cross-build
 
 Supported cross-compilation targets
doc/guides/linux_gsg/cross_build_dpdk_for_riscv.rst +1 -1
index 9e121645a8..7d7f7ac72b 100644
@@ -68,13 +68,13 @@ Cross Compiling DPDK with GNU toolchain using Meson
 
 To cross-compile DPDK for a desired target machine use the following command::
 
-   meson cross-build --cross-file <target_machine_configuration>
+   meson setup cross-build --cross-file <target_machine_configuration>
    ninja -C cross-build

doc/guides/linux_gsg/cross_build_dpdk_for_riscv.rst Cross Compiling DPDK with GNU toolchain using Meson · line 80

Quoted 10 lines
doc/guides/linux_gsg/cross_build_dpdk_for_riscv.rst +1 -1
 
 For example if the target machine is a generic rv64gc RISC-V, use the following
 command::
 
-   meson riscv64-build-gcc --cross-file config/riscv/riscv64_linux_gcc
+   meson setup riscv64-build-gcc --cross-file config/riscv/riscv64_linux_gcc
    ninja -C riscv64-build-gcc
 
 If riscv-gnu-toolchain is used, binary names should be updated to match. Update
<snip>

Thanks for fixing this!

Signature · 2 lines
Best Regards,
Stanisław Kardach
Acked-by Stanislaw Kardach on v2 1/1 Applied
#7 lore raw
In reply to David Marchand
Quoted 9 lines · David Marchand

From: Stephen Hemminger <[email protected]>

The command "meson build" causes a deprecation warning with meson 0.64.0.

WARNING: Running the setup command as meson [options] instead of
meson setup [options] is ambiguous and deprecated.

Therefore fix the examples in the documentation.

It can become useful in LTS branches later, hence I'm asking for backport.
Cc: [email protected]

Quoted 5 lines
Quoted 6 lines

---
Changes since v1:
- fixed commitlog,
- dropped unrelated changes (and sometimes broken),
- fixed all (I am probably too optimistic) other occurences in the doc,

I did another pass, lgtm.

Applied, thanks.

Signature · 1 line
David Marchand