ARM: dts: aspeed: Yosemite V2: Add GPIO line names
Subsystems (2)
PATCH 1/1 ARM: dts: aspeed: Yosemite V2: Add GPIO line names
Name the GPIOs to help userspace work with them. The names describe the functionality the lines provide, it makes easier to share userspace code across different system.
Signed-off-by Karthikeyan Pasupathi <[email protected]>
---
--- v1 - Initial draft
---
--- .../dts/aspeed-bmc-facebook-yosemitev2.dts | 41 +++++++++++++++++++ 1 file changed, 41 insertions(+)
arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts +41 -0
@@ -119,6 +119,47 @@ &pinctrl_adc15_default>; }; +&gpio { + status = "okay"; + gpio-line-names = + /*A0-A7*/ "","","","","","","","", + /*B0-B7*/ "","","","","","","","", + /*C0-C7*/ "","","","","","","","", + /*D0-D7*/ "POWER_BUTTON","POWER_OUT1","","POWER_OUT2","","POWER_OUT3","", + "POWER_OUT4", + /*E0-E7*/ "DEBUG_UART_SEL0","DEBUG_UART_SEL1","DEBUG_UART_SEL2", + "DEBUG_UART_RX_SEL_N","","","","", + /*F0-F7*/ "","","","","","","","", + /*G0-G7*/ "LED_POST_CODE_0","LED_POST_CODE_1","LED_POST_CODE_2", + "LED_POST_CODE_3","","","","", + /*H0-H7*/ "","","","","","","","", + /*I0-I7*/ "SLOT1_POWER_OK","SLOT2_POWER_OK","SLOT3_POWER_OK","SLOT4_POWER_OK", + "","","","", + /*J0-J7*/ "","","","","","","","", + /*K0-K7*/ "","","","","","","","", + /*L0-L7*/ "","","","","","","","", + /*M0-M7*/ "","","","","","","","", + /*N0-N7*/ "","","I2C_SLOT1","I2C_SLOT2","I2C_SLOT3","I2C_SLOT4","","", + /*O0-O7*/ "","","","SELECTOR_BUTTON","SLOT1_POWER","SLOT2_POWER","SLOT3_POWER", + "SLOT4_POWER", + /*P0-P7*/ "","","","","LED_POST_CODE_4","LED_POST_CODE_5","LED_POST_CODE_6", + "LED_POST_CODE_7", + /*Q0-Q7*/ "","","","","","","","", + /*R0-R7*/ "","","","GPIO_DBG_CARD_PRSNT","","","","", + /*S0-S7*/ "RESET_OUT1","RESET_OUT2","RESET_OUT3","RESET_OUT4","","","","", + /*T0-T7*/ "","","","","","","","", + /*U0-U7*/ "","","","","","","","", + /*V0-V7*/ "","","","","","","","", + /*W0-W7*/ "","","","","","","","", + /*X0-X7*/ "","","","","","","","", + /*Y0-Y7*/ "","","","","","","","", + /*Z0-Z7*/ "POST_COMPLETE","POST_COMPLETE2","POST_COMPLETE3","POST_COMPLETE4", + "","","","", + /*AA0-AA7*/ "","","","","HAND_SW1","HAND_SW2","HAND_SW3","HAND_SW4", + /*AB0-AB7*/ "RESET_BUTTON","","","","","","","", + /*AC0-AC7*/ "","","","","","","",""; +}; + &i2c1 { //Host1 IPMB bus status = "okay";
Signature · 1 line
2.17.1