xdp: hints via kfuncs
Subsystems (17)
cover xdp: hints via kfuncs
Please see the first patch in the series for the overall design and use-cases.
Changes since last RFC:
- drop ice/bnxt example implementation (Alexander)
-ENOHARDWARE to test
- fix/test mlx4 implementation
Confirmed that I get reasonable looking timestamp. The last patch in the series is the small xsk program that can be used to dump incoming metadata.
- bpf_push64/bpf_pop64 (Alexei)
x86_64+arm64(untested)+disassembler
- struct xdp_to_skb_metadata -> struct xdp_skb_metadata (Toke)
s/xdp_to_skb/xdp_skb/
- Documentation/bpf/xdp-rx-metadata.rst
Documents functionality, assumptions and limitations.
- bpf_xdp_metadata_export_to_skb returns true/false (Martin)
Plus xdp_md->skb_metadata field to access it.
- BPF_F_XDP_HAS_METADATA flag (Toke/Martin)
Drop magic, use the flag instead.
- drop __randomize_layout
Not sure it's possible to sanely expose it via UAPI. Because every .o potentially gets its own randomized layout, test_progs refuses to link.
- remove __net_timestamp in veth driver (John/Jesper)
Instead, calling ktime_get from the kfunc; enough for the selftests.
Future work on RX side:
- Support more devices besides veth and mlx4
- Support more metadata besides RX timestamp.
- Convert skb_metadata_set() callers to xdp_convert_skb_metadata() which handles extra xdp_skb_metadata
Prior art (to record pros/cons for different approaches):
- Stable UAPI approach:
https://lore.kernel.org/bpf/[email protected]/
- Metadata+BTF_ID appoach:
https://lore.kernel.org/bpf/166256538687.1434226.15760041133601409770.stgit@firesoul/
- kfuncs v2 RFC:
https://lore.kernel.org/bpf/[email protected]/
- kfuncs v1 RFC:
https://lore.kernel.org/bpf/[email protected]/
Stanislav Fomichev (11):
bpf: Document XDP RX metadata
bpf: Introduce bpf_patch
bpf: Support inlined/unrolled kfuncs for xdp metadata
bpf: Implement hidden BPF_PUSH64 and BPF_POP64 instructions
veth: Support rx timestamp metadata for xdp
xdp: Carry over xdp metadata into skb context selftests/bpf: Verify xdp_metadata xdp->af_xdp path selftests/bpf: Verify xdp_metadata xdp->skb path
mlx4: Introduce mlx4_xdp_buff wrapper for xdp_buff
mxl4: Support rx timestamp metadata for xdp selftests/bpf: Simple program to dump XDP RX metadata
Documentation/bpf/kfuncs.rst | 8 + Documentation/bpf/xdp-rx-metadata.rst | 109 +++++ arch/arm64/net/bpf_jit_comp.c | 8 + arch/x86/net/bpf_jit_comp.c | 8 + .../net/ethernet/mellanox/mlx4/en_netdev.c | 2 + drivers/net/ethernet/mellanox/mlx4/en_rx.c | 68 ++- drivers/net/veth.c | 22 +- include/linux/bpf.h | 1 + include/linux/bpf_patch.h | 29 ++ include/linux/btf.h | 1 + include/linux/btf_ids.h | 4 + include/linux/filter.h | 23 + include/linux/mlx4/device.h | 7 + include/linux/netdevice.h | 5 + include/linux/skbuff.h | 4 + include/net/xdp.h | 41 ++ include/uapi/linux/bpf.h | 12 + kernel/bpf/Makefile | 2 +- kernel/bpf/bpf_patch.c | 77 +++ kernel/bpf/disasm.c | 6 + kernel/bpf/syscall.c | 28 +- kernel/bpf/verifier.c | 80 ++++ net/core/dev.c | 7 + net/core/filter.c | 40 ++ net/core/skbuff.c | 20 + net/core/xdp.c | 184 +++++++- tools/include/uapi/linux/bpf.h | 12 + tools/testing/selftests/bpf/.gitignore | 1 + tools/testing/selftests/bpf/DENYLIST.s390x | 1 + tools/testing/selftests/bpf/Makefile | 8 +- .../selftests/bpf/prog_tests/xdp_metadata.c | 440 ++++++++++++++++++ .../selftests/bpf/progs/xdp_hw_metadata.c | 99 ++++ .../selftests/bpf/progs/xdp_metadata.c | 114 +++++ tools/testing/selftests/bpf/xdp_hw_metadata.c | 404 ++++++++++++++++ tools/testing/selftests/bpf/xdp_hw_metadata.h | 6 + 35 files changed, 1856 insertions(+), 25 deletions(-) create mode 100644 Documentation/bpf/xdp-rx-metadata.rst create mode 100644 include/linux/bpf_patch.h create mode 100644 kernel/bpf/bpf_patch.c create mode 100644 tools/testing/selftests/bpf/prog_tests/xdp_metadata.c create mode 100644 tools/testing/selftests/bpf/progs/xdp_hw_metadata.c create mode 100644 tools/testing/selftests/bpf/progs/xdp_metadata.c create mode 100644 tools/testing/selftests/bpf/xdp_hw_metadata.c create mode 100644 tools/testing/selftests/bpf/xdp_hw_metadata.h
Signature · 1 line
2.38.1.431.g37b22c650d-goog
PATCH 1/11 bpf: Document XDP RX metadata
Document all current use-cases and assumptions.
--- Documentation/bpf/xdp-rx-metadata.rst | 109 ++++++++++++++++++++++++++ 1 file changed, 109 insertions(+) create mode 100644 Documentation/bpf/xdp-rx-metadata.rst
Documentation/bpf/xdp-rx-metadata.rst new file +109 -0
@@ -0,0 +1,109 @@ +=============== +XDP RX Metadata +=============== + +XDP programs support creating and passing custom metadata via +``bpf_xdp_adjust_meta``. This metadata can be consumed by the following +entities: + +1. ``AF_XDP`` consumer. +2. Kernel core stack via ``XDP_PASS``. +3. Another device via ``bpf_redirect_map``. + +General Design +============== + +XDP has access to a set of kfuncs to manipulate the metadata. Every +device driver implements these kfuncs by generating BPF bytecode +to parse it out from the hardware descriptors. The set of kfuncs is +declared in ``include/net/xdp.h`` via ``XDP_METADATA_KFUNC_xxx``. + +Currently, the following kfuncs are supported. In the future, as more +metadata is supported, this set will grow: + +- ``bpf_xdp_metadata_rx_timestamp_supported`` returns true/false to + indicate whether the device supports RX timestamps in general +- ``bpf_xdp_metadata_rx_timestamp`` returns packet RX timestamp or 0 +- ``bpf_xdp_metadata_export_to_skb`` prepares metadata layout that + the kernel will be able to consume. See ``bpf_redirect_map`` section + below for more details. + +Within the XDP frame, the metadata layout is as follows:: + + +----------+------------------+-----------------+------+ + | headroom | xdp_skb_metadata | custom metadata | data | + +----------+------------------+-----------------+------+ + ^ ^ + | | + xdp_buff->data_meta xdp_buff->data + +Where ``xdp_skb_metadata`` is the metadata prepared by +``bpf_xdp_metadata_export_to_skb``. And ``custom metadata`` +is prepared by the BPF program via calls to ``bpf_xdp_adjust_meta``. + +Note that ``bpf_xdp_metadata_export_to_skb`` doesn't adjust +``xdp->data_meta`` pointer. To access the metadata generated +by ``bpf_xdp_metadata_export_to_skb`` use ``xdp_buf->skb_metadata``. + +AF_XDP +====== + +``AF_XDP`` use-case implies that there is a contract between the BPF program +that redirects XDP frames into the ``XSK`` and the final consumer. +Thus the BPF program manually allocates a fixed number of +bytes out of metadata via ``bpf_xdp_adjust_meta`` and calls a subset +of kfuncs to populate it. User-space ``XSK`` consumer, looks +at ``xsk_umem__get_data() - METADATA_SIZE`` to locate its metadata. + +Here is the ``AF_XDP`` consumer layout (note missing ``data_meta`` pointer):: + + +----------+------------------+-----------------+------+ + | headroom | xdp_skb_metadata | custom metadata | data | + +----------+------------------+-----------------+------+ + ^ + | + rx_desc->address + +XDP_PASS +======== + +This is the path where the packets processed by the XDP program are passed +into the kernel. The kernel creates ``skb`` out of the ``xdp_buff`` contents. +Currently, every driver has a custom kernel code to parse the descriptors and +populate ``skb`` metadata when doing this ``xdp_buff->skb`` conversion. +In the future, we'd like to support a case where XDP program can override +some of that metadata. + +The plan of record is to make this path similar to ``bpf_redirect_map`` +below where the program would call ``bpf_xdp_metadata_export_to_skb``, +override the metadata and return ``XDP_PASS``. Additional work in +the drivers will be required to enable this (for example, to skip +populating ``skb`` metadata from the descriptors when +``bpf_xdp_metadata_export_to_skb`` has been called). + +bpf_redirect_map +================ + +``bpf_redirect_map`` can redirect the frame to a different device. +In this case we don't know ahead of time whether that final consumer +will further redirect to an ``XSK`` or pass it to the kernel via ``XDP_PASS``. +Additionally, the final consumer doesn't have access to the original +hardware descriptor and can't access any of the original metadata. + +To support passing metadata via ``bpf_redirect_map``, there is a +``bpf_xdp_metadata_export_to_skb`` kfunc that populates a subset +of metadata into ``xdp_buff``. The layout is defined in +``struct xdp_skb_metadata``. + +Mixing custom metadata and xdp_skb_metadata +=========================================== + +For the cases of ``bpf_redirect_map``, where the final consumer isn't +known ahead of time, the program can store both, custom metadata +and ``xdp_skb_metadata`` for the kernel consumption. + +Current limitation is that the program cannot adjust ``data_meta`` (via +``bpf_xdp_adjust_meta``) after a call to ``bpf_xdp_metadata_export_to_skb``. +So it has to, first, prepare its custom metadata layout and only then, +optionally, store ``xdp_skb_metadata`` via a call to +``bpf_xdp_metadata_export_to_skb``.
Signature · 1 line
2.38.1.431.g37b22c650d-goog
Re: [PATCH bpf-next 01/11] bpf: Document XDP RX metadata
Quoted 16 lines · Stanislav Fomichev
Document all current use-cases and assumptions.
Signed-off-by Stanislav Fomichev <[email protected]>--- Documentation/bpf/xdp-rx-metadata.rst | 109 ++++++++++++++++++++++++++ 1 file changed, 109 insertions(+) create mode 100644 Documentation/bpf/xdp-rx-metadata.rstDocumentation/bpf/xdp-rx-metadata.rst new file +1
-0@@ -0,0 +1,109 @@ +===============
Documentation/bpf/xdp-rx-metadata.rst line 11
Quoted 10 lines
Documentation/bpf/xdp-rx-metadata.rst new file +10
-0+XDP RX Metadata +=============== + +XDP programs support creating and passing custom metadata via +``bpf_xdp_adjust_meta``. This metadata can be consumed by the following +entities: + +1. ``AF_XDP`` consumer. +2. Kernel core stack via ``XDP_PASS``. +3. Another device via ``bpf_redirect_map``.
4. Other eBPF programs via eBPF tail calls.
Quoted 101 lines
Documentation/bpf/xdp-rx-metadata.rst new file +98
-1+ +General Design +============== + +XDP has access to a set of kfuncs to manipulate the metadata. Every +device driver implements these kfuncs by generating BPF bytecode +to parse it out from the hardware descriptors. The set of kfuncs is +declared in ``include/net/xdp.h`` via ``XDP_METADATA_KFUNC_xxx``. + +Currently, the following kfuncs are supported. In the future, as more +metadata is supported, this set will grow: + +- ``bpf_xdp_metadata_rx_timestamp_supported`` returns true/false to + indicate whether the device supports RX timestamps in general +- ``bpf_xdp_metadata_rx_timestamp`` returns packet RX timestamp or 0 +- ``bpf_xdp_metadata_export_to_skb`` prepares metadata layout that + the kernel will be able to consume. See ``bpf_redirect_map`` section + below for more details. + +Within the XDP frame, the metadata layout is as follows:: + + +----------+------------------+-----------------+------+ + | headroom | xdp_skb_metadata | custom metadata | data | + +----------+------------------+-----------------+------+ + ^ ^ + | | + xdp_buff->data_meta xdp_buff->data + +Where ``xdp_skb_metadata`` is the metadata prepared by +``bpf_xdp_metadata_export_to_skb``. And ``custom metadata`` +is prepared by the BPF program via calls to ``bpf_xdp_adjust_meta``. + +Note that ``bpf_xdp_metadata_export_to_skb`` doesn't adjust +``xdp->data_meta`` pointer. To access the metadata generated +by ``bpf_xdp_metadata_export_to_skb`` use ``xdp_buf->skb_metadata``. + +AF_XDP +====== + +``AF_XDP`` use-case implies that there is a contract between the BPF program +that redirects XDP frames into the ``XSK`` and the final consumer. +Thus the BPF program manually allocates a fixed number of +bytes out of metadata via ``bpf_xdp_adjust_meta`` and calls a subset +of kfuncs to populate it. User-space ``XSK`` consumer, looks +at ``xsk_umem__get_data() - METADATA_SIZE`` to locate its metadata. + +Here is the ``AF_XDP`` consumer layout (note missing ``data_meta`` pointer):: + + +----------+------------------+-----------------+------+ + | headroom | xdp_skb_metadata | custom metadata | data | + +----------+------------------+-----------------+------+ + ^ + | + rx_desc->address + +XDP_PASS +======== + +This is the path where the packets processed by the XDP program are passed +into the kernel. The kernel creates ``skb`` out of the ``xdp_buff`` contents. +Currently, every driver has a custom kernel code to parse the descriptors and +populate ``skb`` metadata when doing this ``xdp_buff->skb`` conversion. +In the future, we'd like to support a case where XDP program can override +some of that metadata. + +The plan of record is to make this path similar to ``bpf_redirect_map`` +below where the program would call ``bpf_xdp_metadata_export_to_skb``, +override the metadata and return ``XDP_PASS``. Additional work in +the drivers will be required to enable this (for example, to skip +populating ``skb`` metadata from the descriptors when +``bpf_xdp_metadata_export_to_skb`` has been called). + +bpf_redirect_map +================ + +``bpf_redirect_map`` can redirect the frame to a different device. +In this case we don't know ahead of time whether that final consumer +will further redirect to an ``XSK`` or pass it to the kernel via ``XDP_PASS``. +Additionally, the final consumer doesn't have access to the original +hardware descriptor and can't access any of the original metadata. + +To support passing metadata via ``bpf_redirect_map``, there is a +``bpf_xdp_metadata_export_to_skb`` kfunc that populates a subset +of metadata into ``xdp_buff``. The layout is defined in +``struct xdp_skb_metadata``. + +Mixing custom metadata and xdp_skb_metadata +=========================================== + +For the cases of ``bpf_redirect_map``, where the final consumer isn't +known ahead of time, the program can store both, custom metadata +and ``xdp_skb_metadata`` for the kernel consumption. + +Current limitation is that the program cannot adjust ``data_meta`` (via +``bpf_xdp_adjust_meta``) after a call to ``bpf_xdp_metadata_export_to_skb``. +So it has to, first, prepare its custom metadata layout and only then, +optionally, store ``xdp_skb_metadata`` via a call to +``bpf_xdp_metadata_export_to_skb``. --2.38.1.431.g37b22c650d-goog
Re: [PATCH bpf-next 01/11] bpf: Document XDP RX metadata
Quoted 22 lines · Zvi Effron
Quoted 20 lines · Stanislav Fomichev
Document all current use-cases and assumptions.
Signed-off-by Stanislav Fomichev <[email protected]>--- Documentation/bpf/xdp-rx-metadata.rst | 109 ++++++++++++++++++++++++++ 1 file changed, 109 insertions(+) create mode 100644 Documentation/bpf/xdp-rx-metadata.rstDocumentation/bpf/xdp-rx-metadata.rst new file +5
-0@@ -0,0 +1,109 @@ +=============== +XDP RX Metadata +=============== + +XDP programs support creating and passing custom metadata via
Quoted 8 lines
Documentation/bpf/xdp-rx-metadata.rst line 11
Quoted 6 lines
Documentation/bpf/xdp-rx-metadata.rst new file +6
-0+``bpf_xdp_adjust_meta``. This metadata can be consumed by the following +entities: + +1. ``AF_XDP`` consumer. +2. Kernel core stack via ``XDP_PASS``. +3. Another device via ``bpf_redirect_map``.4. Other eBPF programs via eBPF tail calls.
Don't think a tail call is a special case here?
Correct me if I'm wrong, but with a tail call, we retain the original xdp_buff ctx, so the tail call can still use the same kfuncs as if the original bpf prog was running.
Quoted 101 lines
Quoted 101 lines
Documentation/bpf/xdp-rx-metadata.rst new file +98
-1+ +General Design +============== + +XDP has access to a set of kfuncs to manipulate the metadata. Every +device driver implements these kfuncs by generating BPF bytecode +to parse it out from the hardware descriptors. The set of kfuncs is +declared in ``include/net/xdp.h`` via ``XDP_METADATA_KFUNC_xxx``. + +Currently, the following kfuncs are supported. In the future, as more +metadata is supported, this set will grow: + +- ``bpf_xdp_metadata_rx_timestamp_supported`` returns true/false to + indicate whether the device supports RX timestamps in general +- ``bpf_xdp_metadata_rx_timestamp`` returns packet RX timestamp or 0 +- ``bpf_xdp_metadata_export_to_skb`` prepares metadata layout that + the kernel will be able to consume. See ``bpf_redirect_map`` section + below for more details. + +Within the XDP frame, the metadata layout is as follows:: + + +----------+------------------+-----------------+------+ + | headroom | xdp_skb_metadata | custom metadata | data | + +----------+------------------+-----------------+------+ + ^ ^ + | | + xdp_buff->data_meta xdp_buff->data + +Where ``xdp_skb_metadata`` is the metadata prepared by +``bpf_xdp_metadata_export_to_skb``. And ``custom metadata`` +is prepared by the BPF program via calls to ``bpf_xdp_adjust_meta``. + +Note that ``bpf_xdp_metadata_export_to_skb`` doesn't adjust +``xdp->data_meta`` pointer. To access the metadata generated +by ``bpf_xdp_metadata_export_to_skb`` use ``xdp_buf->skb_metadata``. + +AF_XDP +====== + +``AF_XDP`` use-case implies that there is a contract between the BPF program +that redirects XDP frames into the ``XSK`` and the final consumer. +Thus the BPF program manually allocates a fixed number of +bytes out of metadata via ``bpf_xdp_adjust_meta`` and calls a subset +of kfuncs to populate it. User-space ``XSK`` consumer, looks +at ``xsk_umem__get_data() - METADATA_SIZE`` to locate its metadata. + +Here is the ``AF_XDP`` consumer layout (note missing ``data_meta`` pointer):: + + +----------+------------------+-----------------+------+ + | headroom | xdp_skb_metadata | custom metadata | data | + +----------+------------------+-----------------+------+ + ^ + | + rx_desc->address + +XDP_PASS +======== + +This is the path where the packets processed by the XDP program are passed +into the kernel. The kernel creates ``skb`` out of the ``xdp_buff`` contents. +Currently, every driver has a custom kernel code to parse the descriptors and +populate ``skb`` metadata when doing this ``xdp_buff->skb`` conversion. +In the future, we'd like to support a case where XDP program can override +some of that metadata. + +The plan of record is to make this path similar to ``bpf_redirect_map`` +below where the program would call ``bpf_xdp_metadata_export_to_skb``, +override the metadata and return ``XDP_PASS``. Additional work in +the drivers will be required to enable this (for example, to skip +populating ``skb`` metadata from the descriptors when +``bpf_xdp_metadata_export_to_skb`` has been called). + +bpf_redirect_map +================ + +``bpf_redirect_map`` can redirect the frame to a different device. +In this case we don't know ahead of time whether that final consumer +will further redirect to an ``XSK`` or pass it to the kernel via ``XDP_PASS``. +Additionally, the final consumer doesn't have access to the original +hardware descriptor and can't access any of the original metadata. + +To support passing metadata via ``bpf_redirect_map``, there is a +``bpf_xdp_metadata_export_to_skb`` kfunc that populates a subset +of metadata into ``xdp_buff``. The layout is defined in +``struct xdp_skb_metadata``. + +Mixing custom metadata and xdp_skb_metadata +=========================================== + +For the cases of ``bpf_redirect_map``, where the final consumer isn't +known ahead of time, the program can store both, custom metadata +and ``xdp_skb_metadata`` for the kernel consumption. + +Current limitation is that the program cannot adjust ``data_meta`` (via +``bpf_xdp_adjust_meta``) after a call to ``bpf_xdp_metadata_export_to_skb``. +So it has to, first, prepare its custom metadata layout and only then, +optionally, store ``xdp_skb_metadata`` via a call to +``bpf_xdp_metadata_export_to_skb``. --2.38.1.431.g37b22c650d-goog
Re: [PATCH bpf-next 01/11] bpf: Document XDP RX metadata
Quoted 33 lines · Stanislav Fomichev
Quoted 22 lines · Zvi Effron
Quoted 20 lines · Stanislav Fomichev
Document all current use-cases and assumptions.
Signed-off-by Stanislav Fomichev <[email protected]>---
Documentation/bpf/xdp-rx-metadata.rst| 109 ++++++++++++++++++++++++++1 file changed, 109 insertions(+)create mode 100644
Documentation/bpf/xdp-rx-metadata.rstDocumentation/bpf/xdp-rx-metadata.rst new file +5
-0@@ -0,0 +1,109 @@ +=============== +XDP RX Metadata +=============== + +XDP programs support creating and passing custom metadata viaQuoted 8 lines
Documentation/bpf/xdp-rx-metadata.rst line 11
Quoted 6 lines
Documentation/bpf/xdp-rx-metadata.rst new file +6
-0+``bpf_xdp_adjust_meta``. This metadata can be consumed by the following +entities: + +1. ``AF_XDP`` consumer. +2. Kernel core stack via ``XDP_PASS``. +3. Another device via ``bpf_redirect_map``.4. Other eBPF programs via eBPF tail calls.
Quoted 5 lines
Don't think a tail call is a special case here?
Correct me if I'm wrong, but with a tail call, we retain the originalxdp_buffctx, so the tail call can still use the same kfuncs as if the original bpf prog was running.
That's correct, but it's still a separate program that consumes the metadata, unrelated to anything kfuncs. Prior to the existence of kfuncs and AF_XDP, this was (to my knowledge) the primary consumer (outside of the original program, of course) of the metadata.
From the name of the file and commit message, it sounds like this is the documentation for XDP metadata, not the documentation for XDP metadata as used by kfuncs to implement xdp-hints. Is that correct?
Quoted 101 lines
Quoted 101 lines
Quoted 101 lines
Documentation/bpf/xdp-rx-metadata.rst new file +98
-1+ +General Design +============== + +XDP has access to a set of kfuncs to manipulate the metadata. Every +device driver implements these kfuncs by generating BPF bytecode +to parse it out from the hardware descriptors. The set of kfuncs is +declared in ``include/net/xdp.h`` via ``XDP_METADATA_KFUNC_xxx``. + +Currently, the following kfuncs are supported. In the future, as more +metadata is supported, this set will grow: + +- ``bpf_xdp_metadata_rx_timestamp_supported`` returns true/false to + indicate whether the device supports RX timestamps in general +- ``bpf_xdp_metadata_rx_timestamp`` returns packet RX timestamp or 0 +- ``bpf_xdp_metadata_export_to_skb`` prepares metadata layout that + the kernel will be able to consume. See ``bpf_redirect_map`` section + below for more details. + +Within the XDP frame, the metadata layout is as follows:: + + +----------+------------------+-----------------+------+ + | headroom | xdp_skb_metadata | custom metadata | data | + +----------+------------------+-----------------+------+ + ^ ^ + | | + xdp_buff->data_meta xdp_buff->data + +Where ``xdp_skb_metadata`` is the metadata prepared by +``bpf_xdp_metadata_export_to_skb``. And ``custom metadata`` +is prepared by the BPF program via calls to ``bpf_xdp_adjust_meta``. + +Note that ``bpf_xdp_metadata_export_to_skb`` doesn't adjust +``xdp->data_meta`` pointer. To access the metadata generated +by ``bpf_xdp_metadata_export_to_skb`` use ``xdp_buf->skb_metadata``. + +AF_XDP +====== + +``AF_XDP`` use-case implies that there is a contract between the BPF program +that redirects XDP frames into the ``XSK`` and the final consumer. +Thus the BPF program manually allocates a fixed number of +bytes out of metadata via ``bpf_xdp_adjust_meta`` and calls a subset +of kfuncs to populate it. User-space ``XSK`` consumer, looks +at ``xsk_umem__get_data() - METADATA_SIZE`` to locate its metadata. + +Here is the ``AF_XDP`` consumer layout (note missing ``data_meta`` pointer):: + + +----------+------------------+-----------------+------+ + | headroom | xdp_skb_metadata | custom metadata | data | + +----------+------------------+-----------------+------+ + ^ + | + rx_desc->address + +XDP_PASS +======== + +This is the path where the packets processed by the XDP program are passed +into the kernel. The kernel creates ``skb`` out of the ``xdp_buff`` contents. +Currently, every driver has a custom kernel code to parse the descriptors and +populate ``skb`` metadata when doing this ``xdp_buff->skb`` conversion. +In the future, we'd like to support a case where XDP program can override +some of that metadata. + +The plan of record is to make this path similar to ``bpf_redirect_map`` +below where the program would call ``bpf_xdp_metadata_export_to_skb``, +override the metadata and return ``XDP_PASS``. Additional work in +the drivers will be required to enable this (for example, to skip +populating ``skb`` metadata from the descriptors when +``bpf_xdp_metadata_export_to_skb`` has been called). + +bpf_redirect_map +================ + +``bpf_redirect_map`` can redirect the frame to a different device. +In this case we don't know ahead of time whether that final consumer +will further redirect to an ``XSK`` or pass it to the kernel via ``XDP_PASS``. +Additionally, the final consumer doesn't have access to the original +hardware descriptor and can't access any of the original metadata. + +To support passing metadata via ``bpf_redirect_map``, there is a +``bpf_xdp_metadata_export_to_skb`` kfunc that populates a subset +of metadata into ``xdp_buff``. The layout is defined in +``struct xdp_skb_metadata``. + +Mixing custom metadata and xdp_skb_metadata +=========================================== + +For the cases of ``bpf_redirect_map``, where the final consumer isn't +known ahead of time, the program can store both, custom metadata +and ``xdp_skb_metadata`` for the kernel consumption. + +Current limitation is that the program cannot adjust ``data_meta`` (via +``bpf_xdp_adjust_meta``) after a call to ``bpf_xdp_metadata_export_to_skb``. +So it has to, first, prepare its custom metadata layout and only then, +optionally, store ``xdp_skb_metadata`` via a call to +``bpf_xdp_metadata_export_to_skb``. --2.38.1.431.g37b22c650d-goog
Re: [PATCH bpf-next 01/11] bpf: Document XDP RX metadata
Quoted 41 lines · Zvi Effron
Quoted 33 lines · Stanislav Fomichev
Quoted 22 lines · Zvi Effron
Quoted 20 lines · Stanislav Fomichev
Document all current use-cases and assumptions.
Signed-off-by Stanislav Fomichev <[email protected]>---
Documentation/bpf/xdp-rx-metadata.rst| 109 ++++++++++++++++++++++++++1 file changed, 109 insertions(+)create mode 100644
Documentation/bpf/xdp-rx-metadata.rstDocumentation/bpf/xdp-rx-metadata.rst new file +5
-0@@ -0,0 +1,109 @@ +=============== +XDP RX Metadata +=============== + +XDP programs support creating and passing custom metadata viaQuoted 8 lines
Documentation/bpf/xdp-rx-metadata.rst line 11
Quoted 6 lines
Documentation/bpf/xdp-rx-metadata.rst new file +6
-0+``bpf_xdp_adjust_meta``. This metadata can be consumed by the following +entities: + +1. ``AF_XDP`` consumer. +2. Kernel core stack via ``XDP_PASS``. +3. Another device via ``bpf_redirect_map``.4. Other eBPF programs via eBPF tail calls.
Quoted 5 lines
Don't think a tail call is a special case here?
Correct me if I'm wrong, but with a tail call, we retain the originalxdp_buffctx, so the tail call can still use the same kfuncs as if the original bpf prog was running.
Quoted 4 lines
That's correct, but it's still a separate program that consumes the metadata, unrelated to anything kfuncs. Prior to the existence of kfuncs and
AF_XDP, this was (to my knowledge) the primary consumer (outside of the original program, of course) of the metadata.
SG. I'll add this #4 in the respin and will add a short note that the tail call operates on the same ctx.
Quoted 3 lines
From the name of the file and commit message, it sounds like this is the documentation for XDP metadata, not the documentation for XDP metadata as used by kfuncs to implement xdp-hints. Is that correct?
I'm mostly focused on the kfunc-related details for now.
Quoted 101 lines
Quoted 101 lines
Quoted 101 lines
Quoted 101 lines
Documentation/bpf/xdp-rx-metadata.rst new file +98
-1+ +General Design +============== + +XDP has access to a set of kfuncs to manipulate the metadata. Every +device driver implements these kfuncs by generating BPF bytecode +to parse it out from the hardware descriptors. The set of kfuncs is +declared in ``include/net/xdp.h`` via ``XDP_METADATA_KFUNC_xxx``. + +Currently, the following kfuncs are supported. In the future, as more +metadata is supported, this set will grow: + +- ``bpf_xdp_metadata_rx_timestamp_supported`` returns true/false to + indicate whether the device supports RX timestamps in general +- ``bpf_xdp_metadata_rx_timestamp`` returns packet RX timestamp or 0 +- ``bpf_xdp_metadata_export_to_skb`` prepares metadata layout that + the kernel will be able to consume. See ``bpf_redirect_map`` section + below for more details. + +Within the XDP frame, the metadata layout is as follows:: + + +----------+------------------+-----------------+------+ + | headroom | xdp_skb_metadata | custom metadata | data | + +----------+------------------+-----------------+------+ + ^ ^ + | | + xdp_buff->data_meta xdp_buff->data + +Where ``xdp_skb_metadata`` is the metadata prepared by +``bpf_xdp_metadata_export_to_skb``. And ``custom metadata`` +is prepared by the BPF program via calls to ``bpf_xdp_adjust_meta``. + +Note that ``bpf_xdp_metadata_export_to_skb`` doesn't adjust +``xdp->data_meta`` pointer. To access the metadata generated +by ``bpf_xdp_metadata_export_to_skb`` use ``xdp_buf->skb_metadata``. + +AF_XDP +====== + +``AF_XDP`` use-case implies that there is a contract between the BPF program +that redirects XDP frames into the ``XSK`` and the final consumer. +Thus the BPF program manually allocates a fixed number of +bytes out of metadata via ``bpf_xdp_adjust_meta`` and calls a subset +of kfuncs to populate it. User-space ``XSK`` consumer, looks +at ``xsk_umem__get_data() - METADATA_SIZE`` to locate its metadata. + +Here is the ``AF_XDP`` consumer layout (note missing ``data_meta`` pointer):: + + +----------+------------------+-----------------+------+ + | headroom | xdp_skb_metadata | custom metadata | data | + +----------+------------------+-----------------+------+ + ^ + | + rx_desc->address + +XDP_PASS +======== + +This is the path where the packets processed by the XDP program are passed +into the kernel. The kernel creates ``skb`` out of the ``xdp_buff`` contents. +Currently, every driver has a custom kernel code to parse the descriptors and +populate ``skb`` metadata when doing this ``xdp_buff->skb`` conversion. +In the future, we'd like to support a case where XDP program can override +some of that metadata. + +The plan of record is to make this path similar to ``bpf_redirect_map`` +below where the program would call ``bpf_xdp_metadata_export_to_skb``, +override the metadata and return ``XDP_PASS``. Additional work in +the drivers will be required to enable this (for example, to skip +populating ``skb`` metadata from the descriptors when +``bpf_xdp_metadata_export_to_skb`` has been called). + +bpf_redirect_map +================ + +``bpf_redirect_map`` can redirect the frame to a different device. +In this case we don't know ahead of time whether that final consumer +will further redirect to an ``XSK`` or pass it to the kernel via ``XDP_PASS``. +Additionally, the final consumer doesn't have access to the original +hardware descriptor and can't access any of the original metadata. + +To support passing metadata via ``bpf_redirect_map``, there is a +``bpf_xdp_metadata_export_to_skb`` kfunc that populates a subset +of metadata into ``xdp_buff``. The layout is defined in +``struct xdp_skb_metadata``. + +Mixing custom metadata and xdp_skb_metadata +=========================================== + +For the cases of ``bpf_redirect_map``, where the final consumer isn't +known ahead of time, the program can store both, custom metadata +and ``xdp_skb_metadata`` for the kernel consumption. + +Current limitation is that the program cannot adjust ``data_meta`` (via +``bpf_xdp_adjust_meta``) after a call to ``bpf_xdp_metadata_export_to_skb``. +So it has to, first, prepare its custom metadata layout and only then, +optionally, store ``xdp_skb_metadata`` via a call to +``bpf_xdp_metadata_export_to_skb``. --2.38.1.431.g37b22c650d-goog
PATCH 2/11 bpf: Introduce bpf_patch
In reply to Stanislav FomichevA simple abstraction around a series of instructions that transparently handles resizing.
Currently, we have insn_buf[16] in convert_ctx_accesses which might not be enough for xdp kfuncs.
If we find this abstraction helpful, we might convert existing insn_buf[16] to it in the future.
--- include/linux/bpf_patch.h | 29 +++++++++++++++ kernel/bpf/Makefile | 2 +- kernel/bpf/bpf_patch.c | 77 +++++++++++++++++++++++++++++++++++++++ 3 files changed, 107 insertions(+), 1 deletion(-) create mode 100644 include/linux/bpf_patch.h create mode 100644 kernel/bpf/bpf_patch.c
include/linux/bpf_patch.h new file +29 -0
@@ -0,0 +1,29 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +#ifndef _LINUX_BPF_PATCH_H +#define _LINUX_BPF_PATCH_H 1 + +#include <linux/bpf.h> + +struct bpf_patch { +struct bpf_insn *insn; +size_t capacity; +size_t len; +int err; +}; + +void bpf_patch_free (struct bpf_patch *patch); +size_t bpf_patch_len (const struct bpf_patch *patch); +int bpf_patch_err (const struct bpf_patch *patch); +void __bpf_patch_append (struct bpf_patch *patch,struct bpf_insn insn); +struct bpf_insn *bpf_patch_data (const struct bpf_patch *patch); +void bpf_patch_resolve_jmp (struct bpf_patch *patch); +u32 bpf_patch_magles_registers (const struct bpf_patch *patch); + +#define bpf_patch_append (patch, ...) ({ \ + struct bpf_insn insn[] = { __VA_ARGS__ }; \ + int i; \ + for (i = 0; i < ARRAY_SIZE(insn); i++) \ + __bpf_patch_append(patch, insn[i]); \ +}) + +#endif
kernel/bpf/Makefile +1 -1
@@ -13,7 +13,7 @@ obj-$(CONFIG_BPF_SYSCALL) += bpf_local_storage.o bpf_task_storage.o obj-${CONFIG_BPF_LSM} += bpf_inode_storage.o obj-$(CONFIG_BPF_SYSCALL) += disasm.o obj-$(CONFIG_BPF_JIT) += trampoline.o -obj-$(CONFIG_BPF_SYSCALL) += btf.o memalloc.o +obj-$(CONFIG_BPF_SYSCALL) += btf.o memalloc.o bpf_patch.o obj-$(CONFIG_BPF_JIT) += dispatcher.o ifeq ($(CONFIG_NET),y) obj-$(CONFIG_BPF_SYSCALL) += devmap.o
kernel/bpf/bpf_patch.c new file +77 -0
77 lines not on this page · raw message
Signature · 1 line
2.38.1.431.g37b22c650d-goog
PATCH 3/11 bpf: Support inlined/unrolled kfuncs for xdp metadata
In reply to Stanislav FomichevKfuncs have to be defined with KF_UNROLL for an attempted unroll. For now, only XDP programs can have their kfuncs unrolled, but we can extend this later on if more programs would like to use it.
For XDP, we define a new kfunc set (xdp_metadata_kfunc_ids) which implements all possible metatada kfuncs. Not all devices have to implement them. If unrolling is not supported by the target device, the default implementation is called instead. The default implementation is unconditionally unrolled to 'return false/0/NULL' for now.
Upon loading, if BPF_F_XDP_HAS_METADATA is passed via prog_flags, we treat prog_index as target device for kfunc unrolling. net_device_ops gains new ndo_unroll_kfunc which does the actual dirty work per device.
The kfunc unrolling itself largely follows the existing map_gen_lookup unrolling example, so there is nothing new here.
--- Documentation/bpf/kfuncs.rst | 8 +++++ include/linux/bpf.h | 1 + include/linux/btf.h | 1 + include/linux/btf_ids.h | 4 +++ include/linux/netdevice.h | 5 +++ include/net/xdp.h | 24 +++++++++++++ include/uapi/linux/bpf.h | 5 +++ kernel/bpf/syscall.c | 28 ++++++++++++++- kernel/bpf/verifier.c | 65 ++++++++++++++++++++++++++++++++++ net/core/dev.c | 7 ++++ net/core/xdp.c | 39 ++++++++++++++++++++ tools/include/uapi/linux/bpf.h | 5 +++ 12 files changed, 191 insertions(+), 1 deletion(-)
Documentation/bpf/kfuncs.rst +8 -0
@@ -169,6 +169,14 @@ rebooting or panicking. Due to this additional restrictions apply to these calls. At the moment they only require CAP_SYS_BOOT capability, but more can be added later. +2.4.8 KF_UNROLL flag +----------------------- + +The KF_UNROLL flag is used for kfuncs that the verifier can attempt to unroll. +Unrolling is currently implemented only for XDP programs' metadata kfuncs. +The main motivation behind unrolling is to remove function call overhead +and allow efficient inlined kfuncs to be generated. + 2.5 Registering the kfuncs --------------------------
include/linux/bpf.h +1 -0
@@ -1240,6 +1240,7 @@ struct bpf_prog_aux {struct work_struct work;struct rcu_head rcu; }; +const struct net_device_ops *xdp_kfunc_ndo; };struct bpf_prog {
include/linux/btf.h +1 -0
@@ -51,6 +51,7 @@#define KF_TRUSTED_ARGS (1 << 4)/* kfunc only takes trusted pointer arguments */ #define KF_SLEEPABLE (1 << 5)/* kfunc may sleep */ #define KF_DESTRUCTIVE (1 << 6)/* kfunc performs destructive actions */ +#define KF_UNROLL (1 << 7)/* kfunc unrolling can be attempted */ /* * Return the name of the passed struct, if exists, or halt the build if for
include/linux/btf_ids.h +4 -0
@@ -195,6 +195,10 @@ asm( \ __BTF_ID_LIST(name, local) \ __BTF_SET8_START(name, local) +#define BTF_SET8_START_GLOBAL (name) \ +__BTF_ID_LIST(name, global) \ +__BTF_SET8_START(name, global) +#define BTF_SET8_END (name) \ asm( \ ".pushsection " BTF_IDS_SECTION ",\"a\"; \n" \
include/linux/netdevice.h +5 -0
@@ -73,6 +73,8 @@ struct udp_tunnel_info;struct udp_tunnel_nic_info ;struct udp_tunnel_nic ;struct bpf_prog ; +struct bpf_insn ; +struct bpf_patch ;struct xdp_buff ;void synchronize_net (void );
@@ -1604,6 +1606,9 @@ struct net_device_ops {ktime_t (*ndo_get_tstamp)(struct net_device *dev,const struct skb_shared_hwtstamps *hwtstamps,bool cycles); +void (*ndo_unroll_kfunc)(const struct bpf_prog *prog, +u32 func_id, +struct bpf_patch *patch); };/**
include/net/xdp.h +24 -0
@@ -7,6 +7,7 @@#define __LINUX_NET_XDP_H__#include <linux/skbuff.h> /* skb_shared_info */ +#include <linux/btf_ids.h> /* btf_id_set8 */ /** * DOC: XDP RX-queue information
@@ -409,4 +410,27 @@ void xdp_attachment_setup(struct xdp_attachment_info *info,#define DEV_MAP_BULK_SIZE XDP_BULK_QUEUE_SIZE +#define XDP_METADATA_KFUNC_xxx \ + XDP_METADATA_KFUNC(XDP_METADATA_KFUNC_RX_TIMESTAMP_SUPPORTED, \ + bpf_xdp_metadata_rx_timestamp_supported) \ + XDP_METADATA_KFUNC(XDP_METADATA_KFUNC_RX_TIMESTAMP, \ + bpf_xdp_metadata_rx_timestamp) \ + +enum { +#define XDP_METADATA_KFUNC(name, str) name, +XDP_METADATA_KFUNC_xxx +#undef XDP_METADATA_KFUNC +MAX_XDP_METADATA_KFUNC , +}; + +#ifdef CONFIG_DEBUG_INFO_BTF +extern struct btf_id_set8 xdp_metadata_kfunc_ids; +static inline u32 xdp_metadata_kfunc_id (int id) +{ +return xdp_metadata_kfunc_ids.pairs[id].id; +} +#else +static inline u32 xdp_metadata_kfunc_id (int id) {return 0 ; } +#endif +#endif /* __LINUX_NET_XDP_H__ */
include/uapi/linux/bpf.h +5 -0
@@ -1156,6 +1156,11 @@ enum bpf_link_type {*/ #define BPF_F_XDP_HAS_FRAGS (1U << 5) +/* If BPF_F_XDP_HAS_METADATA is used in BPF_PROG_LOAD command, the loaded +* program becomes device-bound but can access it's XDP metadata. +*/ +#define BPF_F_XDP_HAS_METADATA (1U << 6) +/* link_create.kprobe_multi.flags used in LINK_CREATE command for * BPF_TRACE_KPROBE_MULTI attach type to create return probe. */
kernel/bpf/syscall.c +27 -1
@@ -2426,6 +2426,20 @@ static bool is_perfmon_prog_type(enum bpf_prog_type prog_type)/* last field in 'union bpf_attr' used by this command */ #define BPF_PROG_LOAD_LAST_FIELD core_relo_rec_size +static int xdp_resolve_netdev (struct bpf_prog *prog,int ifindex) +{ +struct net *net = current->nsproxy->net_ns; +struct net_device *dev; + +for_each_netdev (net, dev) { +if (dev->ifindex == ifindex) { + prog->aux->xdp_kfunc_ndo = dev->netdev_ops; +return 0 ; + } + } +return -EINVAL ; +} +static int bpf_prog_load (union bpf_attr *attr,bpfptr_t uattr) {enum bpf_prog_type type = attr->prog_type;
@@ -2443,7 +2457,8 @@ static int bpf_prog_load(union bpf_attr *attr, bpfptr_t uattr)BPF_F_TEST_STATE_FREQ |BPF_F_SLEEPABLE |BPF_F_TEST_RND_HI32 | - BPF_F_XDP_HAS_FRAGS)) +BPF_F_XDP_HAS_FRAGS | + BPF_F_XDP_HAS_METADATA)) return -EINVAL; if (!IS_ENABLED(CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS) &&
@@ -2531,6 +2546,17 @@ static int bpf_prog_load(union bpf_attr *attr, bpfptr_t uattr) prog->aux->sleepable = attr->prog_flags &BPF_F_SLEEPABLE ; prog->aux->xdp_has_frags = attr->prog_flags &BPF_F_XDP_HAS_FRAGS ; +if (attr->prog_flags &BPF_F_XDP_HAS_METADATA ) { +/* Reuse prog_ifindex to carry request to unroll +* metadata kfuncs. +*/ + prog->aux->offload_requested = false; + + err =xdp_resolve_netdev (prog, attr->prog_ifindex); +if (err <0 ) + goto free_prog; + } + err =security_bpf_prog_alloc (prog->aux);if (err) goto free_prog;
kernel/bpf/verifier.c +65 -0
83 lines not on this page · raw message
net/core/dev.c +7 -0
@@ -9258,6 +9258,13 @@ static int dev_xdp_attach(struct net_device *dev, struct netlink_ext_ack *extackreturn -EOPNOTSUPP ; } +if (new_prog && + new_prog->aux->xdp_kfunc_ndo && + new_prog->aux->xdp_kfunc_ndo != dev->netdev_ops) { +NL_SET_ERR_MSG (extack,"Cannot attach to a different target device" ); +return -EINVAL ; + } + err =dev_xdp_install (dev, mode, bpf_op, extack, flags, new_prog);if (err)return err;
net/core/xdp.c +39 -0
@@ -4,6 +4,8 @@* Copyright (c) 2017 Jesper Dangaard Brouer, Red Hat Inc. */ #include <linux/bpf.h> +#include <linux/bpf_patch.h> +#include <linux/btf_ids.h> #include <linux/filter.h> #include <linux/types.h> #include <linux/mm.h>
@@ -709,3 +711,40 @@ struct xdp_frame *xdpf_clone(struct xdp_frame *xdpf)return nxdpf; } + +/* Indicates whether particular device supports rx_timestamp metadata. +* This is an optional helper to support marking some branches as +* "dead code" in the BPF programs. +*/ +noinline int bpf_xdp_metadata_rx_timestamp_supported(const struct xdp_md *ctx) +{ +/* payload is ignored, see default case in unroll_kfunc_call */ +return false; +} + +/* Returns rx_timestamp metadata or 0 when the frame doesn't have it. +*/ +noinline const __u64 bpf_xdp_metadata_rx_timestamp(const struct xdp_md *ctx) +{ +/* payload is ignored, see default case in unroll_kfunc_call */ +return 0 ; +} + +#ifdef CONFIG_DEBUG_INFO_BTF +BTF_SET8_START_GLOBAL (xdp_metadata_kfunc_ids) +#define XDP_METADATA_KFUNC(name, str) BTF_ID_FLAGS(func, str, KF_RET_NULL | KF_UNROLL) +XDP_METADATA_KFUNC_xxx +#undef XDP_METADATA_KFUNC +BTF_SET8_END (xdp_metadata_kfunc_ids) + +static const struct btf_kfunc_id_set xdp_metadata_kfunc_set = { + .owner =THIS_MODULE , + .set = &xdp_metadata_kfunc_ids, +}; + +static int __init xdp_metadata_init (void ) +{ +return register_btf_kfunc_id_set (BPF_PROG_TYPE_XDP , &xdp_metadata_kfunc_set); +} +late_initcall (xdp_metadata_init); +#endif
tools/include/uapi/linux/bpf.h +5 -0
@@ -1156,6 +1156,11 @@ enum bpf_link_type {*/ #define BPF_F_XDP_HAS_FRAGS (1U << 5) +/* If BPF_F_XDP_HAS_METADATA is used in BPF_PROG_LOAD command, the loaded +* program becomes device-bound but can access it's XDP metadata. +*/ +#define BPF_F_XDP_HAS_METADATA (1U << 6) +/* link_create.kprobe_multi.flags used in LINK_CREATE command for * BPF_TRACE_KPROBE_MULTI attach type to create return probe. */
Signature · 1 line
2.38.1.431.g37b22c650d-goog
Re: [xdp-hints] [PATCH bpf-next 03/11] bpf: Support inlined/unrolled kfuncs for xdp metadata
Quoted 189 lines · Stanislav Fomichev
Kfuncs have to be defined with
KF_UNROLLfor an attempted unroll. For now, only XDP programs can have their kfuncs unrolled, but we can extend this later on if more programs would like to use it.For XDP, we define a new kfunc set (
xdp_metadata_kfunc_ids) which implements all possible metatada kfuncs. Not all devices have to implement them. If unrolling is not supported by the target device, the default implementation is called instead. The default implementation is unconditionally unrolled to 'return false/0/NULL' for now.Upon loading, if
BPF_F_XDP_HAS_METADATAis passed viaprog_flags, we treatprog_indexas target device for kfunc unrolling.net_device_opsgains newndo_unroll_kfuncwhich does the actual dirty work per device.The kfunc unrolling itself largely follows the existing
map_gen_lookupunrolling example, so there is nothing new here.Cc John Fastabend <[email protected]>Cc David Ahern <[email protected]>Cc Martin KaFai Lau <[email protected]>Cc Jakub Kicinski <[email protected]>Cc Willem de Bruijn <[email protected]>Cc Jesper Dangaard Brouer <[email protected]>Cc Anatoly Burakov <[email protected]>Cc Alexander Lobakin <[email protected]>Cc Magnus Karlsson <[email protected]>Cc Maryam Tahhan <[email protected]>Signed-off-by Stanislav Fomichev <[email protected]>--- Documentation/bpf/kfuncs.rst | 8 +++++ include/linux/bpf.h | 1 + include/linux/btf.h | 1 + include/linux/btf_ids.h | 4 +++ include/linux/netdevice.h | 5 +++ include/net/xdp.h | 24 +++++++++++++ include/uapi/linux/bpf.h | 5 +++ kernel/bpf/syscall.c | 28 ++++++++++++++- kernel/bpf/verifier.c | 65 ++++++++++++++++++++++++++++++++++ net/core/dev.c | 7 ++++ net/core/xdp.c | 39 ++++++++++++++++++++ tools/include/uapi/linux/bpf.h | 5 +++ 12 files changed, 191 insertions(+), 1 deletion(-)Documentation/bpf/kfuncs.rst +8
-0@@ -169,6 +169,14 @@ rebooting or panicking. Due to this additional restrictions apply to these calls. At the moment they only require CAP_SYS_BOOT capability, but more can be added later. +2.4.8 KF_UNROLL flag +----------------------- + +The KF_UNROLL flag is used for kfuncs that the verifier can attempt to unroll. +Unrolling is currently implemented only for XDP programs' metadata kfuncs. +The main motivation behind unrolling is to remove function call overhead +and allow efficient inlined kfuncs to be generated. + 2.5 Registering the kfuncs --------------------------include/linux/bpf.h +1
-0@@ -1240,6 +1240,7 @@ struct bpf_prog_aux {struct work_struct work;struct rcu_head rcu; }; +const struct net_device_ops *xdp_kfunc_ndo; };struct bpf_prog {include/linux/btf.h +1
-0@@ -51,6 +51,7 @@#define KF_TRUSTED_ARGS (1 << 4)/* kfunc only takes trusted pointer arguments */ #define KF_SLEEPABLE (1 << 5)/* kfunc may sleep */ #define KF_DESTRUCTIVE (1 << 6)/* kfunc performs destructive actions */ +#define KF_UNROLL (1 << 7)/* kfunc unrolling can be attempted */ /* * Return the name of the passed struct, if exists, or halt the build if for include/linux/btf_ids.h +4
-0@@ -195,6 +195,10 @@ asm( \ __BTF_ID_LIST(name, local) \ __BTF_SET8_START(name, local) +#define BTF_SET8_START_GLOBAL (name) \ +__BTF_ID_LIST(name, global) \ +__BTF_SET8_START(name, global) +#define BTF_SET8_END (name) \ asm( \ ".pushsection " BTF_IDS_SECTION ",\"a\"; \n" \include/linux/netdevice.h +5
-0@@ -73,6 +73,8 @@ struct udp_tunnel_info;struct udp_tunnel_nic_info ;struct udp_tunnel_nic ;struct bpf_prog ; +struct bpf_insn ; +struct bpf_patch ;struct xdp_buff ;void synchronize_net (void );@@ -1604,6 +1606,9 @@ struct net_device_ops {ktime_t (*ndo_get_tstamp)(struct net_device *dev,const struct skb_shared_hwtstamps *hwtstamps,bool cycles); +void (*ndo_unroll_kfunc)(const struct bpf_prog *prog, +u32 func_id, +struct bpf_patch *patch); };/** include/net/xdp.h +24
-0@@ -7,6 +7,7 @@#define __LINUX_NET_XDP_H__#include <linux/skbuff.h> /* skb_shared_info */ +#include <linux/btf_ids.h> /* btf_id_set8 */ /** * DOC: XDP RX-queue information @@ -409,4 +410,27 @@ void xdp_attachment_setup(struct xdp_attachment_info *info,#define DEV_MAP_BULK_SIZE XDP_BULK_QUEUE_SIZE +#define XDP_METADATA_KFUNC_xxx \ + XDP_METADATA_KFUNC(XDP_METADATA_KFUNC_RX_TIMESTAMP_SUPPORTED, \ + bpf_xdp_metadata_rx_timestamp_supported) \ + XDP_METADATA_KFUNC(XDP_METADATA_KFUNC_RX_TIMESTAMP, \ + bpf_xdp_metadata_rx_timestamp) \ + +enum { +#define XDP_METADATA_KFUNC(name, str) name, +XDP_METADATA_KFUNC_xxx +#undef XDP_METADATA_KFUNC +MAX_XDP_METADATA_KFUNC , +}; + +#ifdef CONFIG_DEBUG_INFO_BTF +extern struct btf_id_set8 xdp_metadata_kfunc_ids; +static inline u32 xdp_metadata_kfunc_id (int id) +{ +return xdp_metadata_kfunc_ids.pairs[id].id; +} +#else +static inline u32 xdp_metadata_kfunc_id (int id) {return 0 ; } +#endif +#endif /* __LINUX_NET_XDP_H__ */ include/uapi/linux/bpf.h +5
-0@@ -1156,6 +1156,11 @@ enum bpf_link_type {*/ #define BPF_F_XDP_HAS_FRAGS (1U << 5) +/* If BPF_F_XDP_HAS_METADATA is used in BPF_PROG_LOAD command, the loaded +* program becomes device-bound but can access it's XDP metadata. +*/ +#define BPF_F_XDP_HAS_METADATA (1U << 6) +/* link_create.kprobe_multi.flags used in LINK_CREATE command for * BPF_TRACE_KPROBE_MULTI attach type to create return probe. */ kernel/bpf/syscall.c +0
-0
kernel/bpf/syscall.c static bool is_perfmon_prog_type(enum bpf_prog_type prog_type) · line 2435
Quoted 10 lines
kernel/bpf/syscall.c +7
-0@@ -2426,6 +2426,20 @@ static bool is_perfmon_prog_type(enum bpf_prog_type prog_type)/* last field in 'union bpf_attr' used by this command */ #define BPF_PROG_LOAD_LAST_FIELD core_relo_rec_size +static int xdp_resolve_netdev (struct bpf_prog *prog,int ifindex) +{ +struct net *net = current->nsproxy->net_ns; +struct net_device *dev; + +for_each_netdev (net, dev) { +if (dev->ifindex == ifindex) {
So this is basically dev_get_by_index(), except you're not doing dev_hold()? Which also means there's no protection against the netdev going away?
Quoted 69 lines
kernel/bpf/syscall.c +7
-0+ prog->aux->xdp_kfunc_ndo = dev->netdev_ops; +return 0 ; + } + } +return -EINVAL ; +} +static int bpf_prog_load (union bpf_attr *attr,bpfptr_t uattr) {kernel/bpf/syscall.c +13
-1enum bpf_prog_type type = attr->prog_type;@@ -2443,7 +2457,8 @@ static int bpf_prog_load(union bpf_attr *attr, bpfptr_t uattr)BPF_F_TEST_STATE_FREQ |BPF_F_SLEEPABLE |BPF_F_TEST_RND_HI32 | - BPF_F_XDP_HAS_FRAGS)) +BPF_F_XDP_HAS_FRAGS | + BPF_F_XDP_HAS_METADATA)) return -EINVAL; if (!IS_ENABLED(CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS) &&@@ -2531,6 +2546,17 @@ static int bpf_prog_load(union bpf_attr *attr, bpfptr_t uattr) prog->aux->sleepable = attr->prog_flags &BPF_F_SLEEPABLE ; prog->aux->xdp_has_frags = attr->prog_flags &BPF_F_XDP_HAS_FRAGS ; +if (attr->prog_flags &BPF_F_XDP_HAS_METADATA ) { +/* Reuse prog_ifindex to carry request to unroll +* metadata kfuncs. +*/ + prog->aux->offload_requested = false; + + err =xdp_resolve_netdev (prog, attr->prog_ifindex); +if (err <0 ) + goto free_prog; + } + err =security_bpf_prog_alloc (prog->aux);if (err) goto free_prog;kernel/bpf/verifier.c +15
-0@@ -9,6 +9,7 @@#include <linux/types.h> #include <linux/slab.h> #include <linux/bpf.h> +#include <linux/bpf_patch.h> #include <linux/btf.h> #include <linux/bpf_verifier.h> #include <linux/filter.h> @@ -14015,6 +14016,43 @@ static int fixup_call_args(struct bpf_verifier_env *env)return err; } +static int unroll_kfunc_call (struct bpf_verifier_env *env, +struct bpf_insn *insn, +struct bpf_patch *patch) +{ +enum bpf_prog_type prog_type; +struct bpf_prog_aux *aux; +struct btf *desc_btf; +u32 *kfunc_flags; +u32 func_id; + + desc_btf =find_kfunc_desc_btf (env, insn->off); +if (IS_ERR (desc_btf)) +return PTR_ERR (desc_btf); +
kernel/bpf/verifier.c static int fixup_call_args(struct bpf_verifier_env *env) · line 14042
Quoted 10 lines
kernel/bpf/verifier.c +10
-0+ prog_type =resolve_prog_type (env->prog); + func_id = insn->imm; + + kfunc_flags =btf_kfunc_id_set_contains (desc_btf, prog_type, func_id); +if (!kfunc_flags) +return 0 ; +if (!(*kfunc_flags &KF_UNROLL )) +return 0 ; +if (prog_type !=BPF_PROG_TYPE_XDP ) +return 0 ;
Should this just handle XDP_METADATA_KFUNC_EXPORT_TO_SKB instead of passing that into the driver (to avoid every driver having to reimplement the same call to xdp_metadata_export_to_skb())?
-Toke
Re: [xdp-hints] [PATCH bpf-next 03/11] bpf: Support inlined/unrolled kfuncs for xdp metadata
Quoted 195 lines · Toke Høiland-Jørgensen
Quoted 192 lines · Stanislav Fomichev
Kfuncs have to be defined with
KF_UNROLLfor an attempted unroll. For now, only XDP programs can have their kfuncs unrolled, but we can extend this later on if more programs would like to use it.For XDP, we define a new kfunc set (
xdp_metadata_kfunc_ids) which implements all possible metatada kfuncs. Not all devices have to implement them. If unrolling is not supported by the target device, the default implementation is called instead. The default implementation is unconditionally unrolled to 'return false/0/NULL' for now.Upon loading, if
BPF_F_XDP_HAS_METADATAis passed viaprog_flags, we treatprog_indexas target device for kfunc unrolling.net_device_opsgains newndo_unroll_kfuncwhich does the actual dirty work per device.The kfunc unrolling itself largely follows the existing
map_gen_lookupunrolling example, so there is nothing new here.Cc John Fastabend <[email protected]>Cc David Ahern <[email protected]>Cc Martin KaFai Lau <[email protected]>Cc Jakub Kicinski <[email protected]>Cc Willem de Bruijn <[email protected]>Cc Jesper Dangaard Brouer <[email protected]>Cc Anatoly Burakov <[email protected]>Cc Alexander Lobakin <[email protected]>Cc Magnus Karlsson <[email protected]>Cc Maryam Tahhan <[email protected]>Signed-off-by Stanislav Fomichev <[email protected]>--- Documentation/bpf/kfuncs.rst | 8 +++++ include/linux/bpf.h | 1 + include/linux/btf.h | 1 + include/linux/btf_ids.h | 4 +++ include/linux/netdevice.h | 5 +++ include/net/xdp.h | 24 +++++++++++++ include/uapi/linux/bpf.h | 5 +++ kernel/bpf/syscall.c | 28 ++++++++++++++- kernel/bpf/verifier.c | 65 ++++++++++++++++++++++++++++++++++ net/core/dev.c | 7 ++++ net/core/xdp.c | 39 ++++++++++++++++++++ tools/include/uapi/linux/bpf.h | 5 +++ 12 files changed, 191 insertions(+), 1 deletion(-)Documentation/bpf/kfuncs.rst +8
-0@@ -169,6 +169,14 @@ rebooting or panicking. Due to this additional restrictions apply to these calls. At the moment they only require CAP_SYS_BOOT capability, but more can be added later. +2.4.8 KF_UNROLL flag +----------------------- + +The KF_UNROLL flag is used for kfuncs that the verifier can attempt to unroll. +Unrolling is currently implemented only for XDP programs' metadata kfuncs. +The main motivation behind unrolling is to remove function call overhead +and allow efficient inlined kfuncs to be generated. + 2.5 Registering the kfuncs --------------------------include/linux/bpf.h +1
-0@@ -1240,6 +1240,7 @@ struct bpf_prog_aux {struct work_struct work;struct rcu_head rcu; }; +const struct net_device_ops *xdp_kfunc_ndo; };struct bpf_prog {include/linux/btf.h +1
-0@@ -51,6 +51,7 @@#define KF_TRUSTED_ARGS (1 << 4)/* kfunc only takes trusted pointer arguments */ #define KF_SLEEPABLE (1 << 5)/* kfunc may sleep */ #define KF_DESTRUCTIVE (1 << 6)/* kfunc performs destructive actions */ +#define KF_UNROLL (1 << 7)/* kfunc unrolling can be attempted */ /* * Return the name of the passed struct, if exists, or halt the build if for include/linux/btf_ids.h +4
-0@@ -195,6 +195,10 @@ asm( \ __BTF_ID_LIST(name, local) \ __BTF_SET8_START(name, local) +#define BTF_SET8_START_GLOBAL (name) \ +__BTF_ID_LIST(name, global) \ +__BTF_SET8_START(name, global) +#define BTF_SET8_END (name) \ asm( \ ".pushsection " BTF_IDS_SECTION ",\"a\"; \n" \include/linux/netdevice.h +5
-0@@ -73,6 +73,8 @@ struct udp_tunnel_info;struct udp_tunnel_nic_info ;struct udp_tunnel_nic ;struct bpf_prog ; +struct bpf_insn ; +struct bpf_patch ;struct xdp_buff ;void synchronize_net (void );@@ -1604,6 +1606,9 @@ struct net_device_ops {ktime_t (*ndo_get_tstamp)(struct net_device *dev,const struct skb_shared_hwtstamps *hwtstamps,bool cycles); +void (*ndo_unroll_kfunc)(const struct bpf_prog *prog, +u32 func_id, +struct bpf_patch *patch); };/** include/net/xdp.h +24
-0@@ -7,6 +7,7 @@#define __LINUX_NET_XDP_H__#include <linux/skbuff.h> /* skb_shared_info */ +#include <linux/btf_ids.h> /* btf_id_set8 */ /** * DOC: XDP RX-queue information @@ -409,4 +410,27 @@ void xdp_attachment_setup(struct xdp_attachment_info *info,#define DEV_MAP_BULK_SIZE XDP_BULK_QUEUE_SIZE +#define XDP_METADATA_KFUNC_xxx \ + XDP_METADATA_KFUNC(XDP_METADATA_KFUNC_RX_TIMESTAMP_SUPPORTED, \ + bpf_xdp_metadata_rx_timestamp_supported) \ + XDP_METADATA_KFUNC(XDP_METADATA_KFUNC_RX_TIMESTAMP, \ + bpf_xdp_metadata_rx_timestamp) \ + +enum { +#define XDP_METADATA_KFUNC(name, str) name, +XDP_METADATA_KFUNC_xxx +#undef XDP_METADATA_KFUNC +MAX_XDP_METADATA_KFUNC , +}; + +#ifdef CONFIG_DEBUG_INFO_BTF +extern struct btf_id_set8 xdp_metadata_kfunc_ids; +static inline u32 xdp_metadata_kfunc_id (int id) +{ +return xdp_metadata_kfunc_ids.pairs[id].id; +} +#else +static inline u32 xdp_metadata_kfunc_id (int id) {return 0 ; } +#endif +#endif /* __LINUX_NET_XDP_H__ */ include/uapi/linux/bpf.h +5
-0@@ -1156,6 +1156,11 @@ enum bpf_link_type {*/ #define BPF_F_XDP_HAS_FRAGS (1U << 5) +/* If BPF_F_XDP_HAS_METADATA is used in BPF_PROG_LOAD command, the loaded +* program becomes device-bound but can access it's XDP metadata. +*/ +#define BPF_F_XDP_HAS_METADATA (1U << 6) +/* link_create.kprobe_multi.flags used in LINK_CREATE command for * BPF_TRACE_KPROBE_MULTI attach type to create return probe. */ kernel/bpf/syscall.c +0
-0@@ -2426,6 +2426,20 @@ static bool is_perfmon_prog_type(enum bpf_prog_type prog_type)/* last field in 'union bpf_attr' used by this command */ #define BPF_PROG_LOAD_LAST_FIELD core_relo_rec_size
Quoted 11 lines
kernel/bpf/syscall.c static bool is_perfmon_prog_type(enum bpf_prog_type prog_type) · line 2435
Quoted 7 lines
kernel/bpf/syscall.c +7
-0+static int xdp_resolve_netdev (struct bpf_prog *prog,int ifindex) +{ +struct net *net = current->nsproxy->net_ns; +struct net_device *dev; + +for_each_netdev (net, dev) { +if (dev->ifindex == ifindex) {So this is basically
dev_get_by_index(), except you're not doingdev_hold()? Which also means there's no protection against the netdev going away?
Yeah, good point, will use dev_get_by_index here instead with proper refcnt..
Quoted 75 lines
Quoted 75 lines
kernel/bpf/syscall.c +7
-0+ prog->aux->xdp_kfunc_ndo = dev->netdev_ops; +return 0 ; + } + } +return -EINVAL ; +} +static int bpf_prog_load (union bpf_attr *attr,bpfptr_t uattr) {enum bpf_prog_type type = attr->prog_type;kernel/bpf/syscall.c +13
-1@@ -2443,7 +2457,8 @@ static int bpf_prog_load(union bpf_attr *attr, bpfptr_t uattr)BPF_F_TEST_STATE_FREQ |BPF_F_SLEEPABLE |BPF_F_TEST_RND_HI32 | - BPF_F_XDP_HAS_FRAGS)) +BPF_F_XDP_HAS_FRAGS | + BPF_F_XDP_HAS_METADATA)) return -EINVAL; if (!IS_ENABLED(CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS) &&@@ -2531,6 +2546,17 @@ static int bpf_prog_load(union bpf_attr *attr, bpfptr_t uattr) prog->aux->sleepable = attr->prog_flags &BPF_F_SLEEPABLE ; prog->aux->xdp_has_frags = attr->prog_flags &BPF_F_XDP_HAS_FRAGS ; +if (attr->prog_flags &BPF_F_XDP_HAS_METADATA ) { +/* Reuse prog_ifindex to carry request to unroll +* metadata kfuncs. +*/ + prog->aux->offload_requested = false; + + err =xdp_resolve_netdev (prog, attr->prog_ifindex); +if (err <0 ) + goto free_prog; + } + err =security_bpf_prog_alloc (prog->aux);if (err) goto free_prog;kernel/bpf/verifier.c +21
-0@@ -9,6 +9,7 @@#include <linux/types.h> #include <linux/slab.h> #include <linux/bpf.h> +#include <linux/bpf_patch.h> #include <linux/btf.h> #include <linux/bpf_verifier.h> #include <linux/filter.h> @@ -14015,6 +14016,43 @@ static int fixup_call_args(struct bpf_verifier_env *env)return err; } +static int unroll_kfunc_call (struct bpf_verifier_env *env, +struct bpf_insn *insn, +struct bpf_patch *patch) +{ +enum bpf_prog_type prog_type; +struct bpf_prog_aux *aux; +struct btf *desc_btf; +u32 *kfunc_flags; +u32 func_id; + + desc_btf =find_kfunc_desc_btf (env, insn->off); +if (IS_ERR (desc_btf)) +return PTR_ERR (desc_btf); + + prog_type =resolve_prog_type (env->prog); + func_id = insn->imm; + + kfunc_flags =btf_kfunc_id_set_contains (desc_btf, prog_type, func_id); +if (!kfunc_flags) +return 0 ;
Quoted 8 lines
kernel/bpf/verifier.c static int fixup_call_args(struct bpf_verifier_env *env) · line 14042
Quoted 4 lines
kernel/bpf/verifier.c +4
-0+if (!(*kfunc_flags &KF_UNROLL )) +return 0 ; +if (prog_type !=BPF_PROG_TYPE_XDP ) +return 0 ;Should this just handle
XDP_METADATA_KFUNC_EXPORT_TO_SKBinstead of passing that into the driver (to avoid every driver having to reimplement the same call toxdp_metadata_export_to_skb())?
Good idea, will try to move it here.
Jakub Kicinski
maintainerRe: [PATCH bpf-next 03/11] bpf: Support inlined/unrolled kfuncs for xdp metadata
In reply to Stanislav FomichevQuoted 5 lines · On Mon, 14 Nov 2022 19:02:02 -0800 Stanislav Fomichev wrote:
net/core/dev.c +0
-0
net/core/dev.c static int dev_xdp_attach(struct net_device *dev, struct netlink_ext_ack *extack · line 9266
Quoted 9 lines
net/core/dev.c +6
-0@@ -9258,6 +9258,13 @@ static int dev_xdp_attach(struct net_device *dev, struct netlink_ext_ack *extackreturn -EOPNOTSUPP ; } +if (new_prog && + new_prog->aux->xdp_kfunc_ndo && + new_prog->aux->xdp_kfunc_ndo != dev->netdev_ops) { +NL_SET_ERR_MSG (extack,"Cannot attach to a different target device" ); +return -EINVAL ; + }
This chunk can go up into the large
if (new_prog) {
...list of checks?
nit: aux->xdp_kfunc_ndo sounds like you're storing the kfunc NDO,
not all ndos. Throw in an 's' at the end, or some such?
Re: [PATCH bpf-next 03/11] bpf: Support inlined/unrolled kfuncs for xdp metadata
Quoted 19 lines · Jakub Kicinski
Quoted 5 lines · On Mon, 14 Nov 2022 19:02:02 -0800 Stanislav Fomichev wrote:
net/core/dev.c +0
-0net/core/dev.c static int dev_xdp_attach(struct net_device *dev, struct netlink_ext_ack *extack · line 9266
Quoted 9 lines
net/core/dev.c +6
-0@@ -9258,6 +9258,13 @@ static int dev_xdp_attach(struct net_device *dev, struct netlink_ext_ack *extackreturn -EOPNOTSUPP ; } +if (new_prog && + new_prog->aux->xdp_kfunc_ndo && + new_prog->aux->xdp_kfunc_ndo != dev->netdev_ops) { +NL_SET_ERR_MSG (extack,"Cannot attach to a different target device" ); +return -EINVAL ; + }This chunk can go up into the large
Quoted 4 lines
if (new_prog) { ...list of checks?
Agreed, will move!
Quoted 2 lines
nit:
aux->xdp_kfunc_ndosounds like you're storing the kfunc NDO,
not all ndos. Throw in an 's' at the end, or some such?
SG. But I'll most likely replace this xdp_kfunc_ndo with something like xdp_netdev and to add proper refcounting.
PATCH 4/11 bpf: Implement hidden BPF_PUSH64 and BPF_POP64 instructions
In reply to Stanislav FomichevImplemented for:
- x86_64 jit (tested)
- arm64 jit (untested)
Interpreter is not implemented because push/pop are currently used only with xdp kfunc and jit is required to use kfuncs.
Fundamentally:
BPF_ST | BPF_STACK + src_reg == store into the stack BPF_LD | BPF_STACK + dst_reg == load from the stack off/imm are unused
Updated disasm code to properly dump these new instructions:
31: (e2) push r1
32: (79) r5 = *(u64 *)(r1 +56)
33: (55) if r5 != 0x0 goto pc+2
34: (b7) r0 = 0
35: (05) goto pc+1
36: (79) r0 = *(u64 *)(r5 +32)
37: (e0) pop r1
--- arch/arm64/net/bpf_jit_comp.c | 8 ++++++++ arch/x86/net/bpf_jit_comp.c | 8 ++++++++ include/linux/filter.h | 23 +++++++++++++++++++++++ kernel/bpf/disasm.c | 6 ++++++ 4 files changed, 45 insertions(+)
arch/arm64/net/bpf_jit_comp.c +8 -0
@@ -1185,6 +1185,14 @@ static int build_insn(const struct bpf_insn *insn, struct jit_ctx *ctx,*/ break ; +/* kernel hidden stack operations */ +case BPF_ST |BPF_STACK : +emit (A64_PUSH (src, src,A64_SP ), ctx); +break ; +case BPF_LD |BPF_STACK : +emit (A64_POP (dst, dst,A64_SP ), ctx); +break ; +/* ST: *(size *)(dst + off) = imm */ case BPF_ST |BPF_MEM |BPF_W :case BPF_ST |BPF_MEM |BPF_H :
arch/x86/net/bpf_jit_comp.c +8 -0
@@ -1324,6 +1324,14 @@ static int do_jit(struct bpf_prog *bpf_prog, int *addrs, u8 *image, u8 *rw_imageEMIT_LFENCE ();break ; +/* kernel hidden stack operations */ +case BPF_ST |BPF_STACK : +EMIT1 (add_1reg (0x50 , src_reg));/* pushq */ +break ; +case BPF_LD |BPF_STACK : +EMIT1 (add_1reg (0x58 , dst_reg));/* popq */ +break ; +/* ST: *(u8*)(dst_reg + off) = imm */ case BPF_ST |BPF_MEM |BPF_B :if (is_ereg (dst_reg))
include/linux/filter.h +23 -0
@@ -76,6 +76,9 @@ struct ctl_table_header;*/ #define BPF_NOSPEC 0xc0 +/* unused opcode for kernel hidden stack operations */ +#define BPF_STACK 0xe0 +/* As per nm, we expose JITed images as text (code) section for * kallsyms. That way, tools like perf can find it to match * addresses.
@@ -402,6 +405,26 @@ static inline bool insn_is_zext(const struct bpf_insn *insn) .off = 0, \ .imm = 0 }) +/* Push SRC register value onto the stack */ + +#define BPF_PUSH64 (SRC ) \ + ((struct bpf_insn) { \ + .code = BPF_ST | BPF_STACK, \ + .dst_reg = 0, \ + .src_reg = SRC, \ + .off = 0, \ + .imm = 0 }) + +/* Pop stack value into DST register */ + +#define BPF_POP64 (DST ) \ + ((struct bpf_insn) { \ + .code = BPF_LD | BPF_STACK, \ + .dst_reg = DST, \ + .src_reg = 0, \ + .off = 0, \ + .imm = 0 }) +/* Internal classic blocks for direct assignment */ #define __BPF_STMT (CODE ,K ) \
kernel/bpf/disasm.c +6 -0
@@ -214,6 +214,9 @@ void print_bpf_insn(const struct bpf_insn_cbs *cbs, insn->off, insn->imm); }else if (BPF_MODE (insn->code) ==0xc0 /* BPF_NOSPEC, no UAPI */ ) {verbose (cbs->private_data,"(%02x) nospec\n" , insn->code); + }else if (BPF_MODE (insn->code) ==0xe0 /* BPF_STACK, no UAPI */ ) { +verbose (cbs->private_data,"(%02x) push r%d\n" , + insn->code, insn->src_reg); }else {verbose (cbs->private_data,"BUG_st_%02x\n" , insn->code); }
@@ -254,6 +257,9 @@ void print_bpf_insn(const struct bpf_insn_cbs *cbs, insn->code, insn->dst_reg,__func_imm_name (cbs, insn, imm, tmp, sizeof(tmp))); + }else if (BPF_MODE (insn->code) ==0xe0 /* BPF_STACK, no UAPI */ ) { +verbose (cbs->private_data,"(%02x) pop r%d\n" , + insn->code, insn->dst_reg); }else {verbose (cbs->private_data,"BUG_ld_%02x\n" , insn->code);return ;
Signature · 1 line
2.38.1.431.g37b22c650d-goog
PATCH 5/11 veth: Support rx timestamp metadata for xdp
In reply to Stanislav FomichevThe goal is to enable end-to-end testing of the metadata for AF_XDP. Current rx_timestamp kfunc returns current time which should be enough to exercise this new functionality.
--- drivers/net/veth.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+)
drivers/net/veth.c +14 -0
@@ -25,6 +25,7 @@#include <linux/filter.h> #include <linux/ptr_ring.h> #include <linux/bpf_trace.h> +#include <linux/bpf_patch.h> #include <linux/net_tstamp.h> #define DRV_NAME "veth"
@@ -1659,6 +1660,18 @@ static int veth_xdp(struct net_device *dev, struct netdev_bpf *xdp) } } +static void veth_unroll_kfunc (const struct bpf_prog *prog,u32 func_id, +struct bpf_patch *patch) +{ +if (func_id ==xdp_metadata_kfunc_id (XDP_METADATA_KFUNC_RX_TIMESTAMP_SUPPORTED )) { +/* return true; */ +bpf_patch_append (patch,BPF_MOV64_IMM (BPF_REG_0 ,1 )); + }else if (func_id ==xdp_metadata_kfunc_id (XDP_METADATA_KFUNC_RX_TIMESTAMP )) { +/* return ktime_get_mono_fast_ns(); */ +bpf_patch_append (patch,BPF_EMIT_CALL (ktime_get_mono_fast_ns)); + } +} +static const struct net_device_ops veth_netdev_ops = { .ndo_init = veth_dev_init, .ndo_open = veth_open,
@@ -1678,6 +1691,7 @@ static const struct net_device_ops veth_netdev_ops = { .ndo_bpf = veth_xdp, .ndo_xdp_xmit = veth_ndo_xdp_xmit, .ndo_get_peer_dev = veth_peer_dev, + .ndo_unroll_kfunc = veth_unroll_kfunc, };#define VETH_FEATURES (NETIF_F_SG | NETIF_F_FRAGLIST | NETIF_F_HW_CSUM | \
Signature · 1 line
2.38.1.431.g37b22c650d-goog
Re: [xdp-hints] [PATCH bpf-next 05/11] veth: Support rx timestamp metadata for xdp
Quoted 38 lines · Stanislav Fomichev
The goal is to enable end-to-end testing of the metadata for
AF_XDP. Currentrx_timestampkfunc returns current time which should be enough to exercise this new functionality.Cc John Fastabend <[email protected]>Cc David Ahern <[email protected]>Cc Martin KaFai Lau <[email protected]>Cc Jakub Kicinski <[email protected]>Cc Willem de Bruijn <[email protected]>Cc Jesper Dangaard Brouer <[email protected]>Cc Anatoly Burakov <[email protected]>Cc Alexander Lobakin <[email protected]>Cc Magnus Karlsson <[email protected]>Cc Maryam Tahhan <[email protected]>Signed-off-by Stanislav Fomichev <[email protected]>--- drivers/net/veth.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+)drivers/net/veth.c +2
-0@@ -25,6 +25,7 @@#include <linux/filter.h> #include <linux/ptr_ring.h> #include <linux/bpf_trace.h> +#include <linux/bpf_patch.h> #include <linux/net_tstamp.h> #define DRV_NAME "veth"@@ -1659,6 +1660,18 @@ static int veth_xdp(struct net_device *dev, struct netdev_bpf *xdp) } } +static void veth_unroll_kfunc(const struct bpf_prog *prog, u32 func_id,
drivers/net/veth.c static int veth_xdp(struct net_device *dev, struct netdev_bpf *xdp) · line 1673
Quoted 10 lines
drivers/net/veth.c +10
-0+ struct bpf_patch *patch) +{ +if (func_id ==xdp_metadata_kfunc_id (XDP_METADATA_KFUNC_RX_TIMESTAMP_SUPPORTED )) { +/* return true; */ +bpf_patch_append (patch,BPF_MOV64_IMM (BPF_REG_0 ,1 )); + }else if (func_id ==xdp_metadata_kfunc_id (XDP_METADATA_KFUNC_RX_TIMESTAMP )) { +/* return ktime_get_mono_fast_ns(); */ +bpf_patch_append (patch,BPF_EMIT_CALL (ktime_get_mono_fast_ns)); + } +}
So these look reasonable enough, but would be good to see some examples of kfunc implementations that don't just BPF_CALL to a kernel function (with those helper wrappers we were discussing before).
-Toke
Re: [xdp-hints] [PATCH bpf-next 05/11] veth: Support rx timestamp metadata for xdp
Quoted 40 lines · Toke Høiland-Jørgensen
Quoted 37 lines · Stanislav Fomichev
The goal is to enable end-to-end testing of the metadata for
AF_XDP. Currentrx_timestampkfunc returns current time which should be enough to exercise this new functionality.Cc John Fastabend <[email protected]>Cc David Ahern <[email protected]>Cc Martin KaFai Lau <[email protected]>Cc Jakub Kicinski <[email protected]>Cc Willem de Bruijn <[email protected]>Cc Jesper Dangaard Brouer <[email protected]>Cc Anatoly Burakov <[email protected]>Cc Alexander Lobakin <[email protected]>Cc Magnus Karlsson <[email protected]>Cc Maryam Tahhan <[email protected]>Signed-off-by Stanislav Fomichev <[email protected]>--- drivers/net/veth.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+)drivers/net/veth.c +1
-0@@ -25,6 +25,7 @@#include <linux/filter.h> #include <linux/ptr_ring.h> #include <linux/bpf_trace.h> +#include <linux/bpf_patch.h> #include <linux/net_tstamp.h> #define DRV_NAME "veth"@@ -1659,6 +1660,18 @@ static int veth_xdp(struct net_device *dev, struct netdev_bpf *xdp) } }
Quoted 15 lines
drivers/net/veth.c static int veth_xdp(struct net_device *dev, struct netdev_bpf *xdp) · line 1673
Quoted 11 lines
drivers/net/veth.c +11
-0+static void veth_unroll_kfunc (const struct bpf_prog *prog,u32 func_id, +struct bpf_patch *patch) +{ +if (func_id ==xdp_metadata_kfunc_id (XDP_METADATA_KFUNC_RX_TIMESTAMP_SUPPORTED )) { +/* return true; */ +bpf_patch_append (patch,BPF_MOV64_IMM (BPF_REG_0 ,1 )); + }else if (func_id ==xdp_metadata_kfunc_id (XDP_METADATA_KFUNC_RX_TIMESTAMP )) { +/* return ktime_get_mono_fast_ns(); */ +bpf_patch_append (patch,BPF_EMIT_CALL (ktime_get_mono_fast_ns)); + } +}So these look reasonable enough, but would be good to see some examples of kfunc implementations that don't just
BPF_CALLto a kernel function (with those helper wrappers we were discussing before).
Let's maybe add them if/when needed as we add more metadata support? xdp_metadata_export_to_skb has an example, and rfc 1/2 have more examples, so it shouldn't be a problem to resurrect them back at some point?
Re: [xdp-hints] Re: [PATCH bpf-next 05/11] veth: Support rx timestamp metadata for xdp
Quoted 57 lines · Stanislav Fomichev
Quoted 40 lines · Toke Høiland-Jørgensen
Quoted 37 lines · Stanislav Fomichev
The goal is to enable end-to-end testing of the metadata for
AF_XDP. Currentrx_timestampkfunc returns current time which should be enough to exercise this new functionality.Cc John Fastabend <[email protected]>Cc David Ahern <[email protected]>Cc Martin KaFai Lau <[email protected]>Cc Jakub Kicinski <[email protected]>Cc Willem de Bruijn <[email protected]>Cc Jesper Dangaard Brouer <[email protected]>Cc Anatoly Burakov <[email protected]>Cc Alexander Lobakin <[email protected]>Cc Magnus Karlsson <[email protected]>Cc Maryam Tahhan <[email protected]>Signed-off-by Stanislav Fomichev <[email protected]>--- drivers/net/veth.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+)drivers/net/veth.c +1
-0@@ -25,6 +25,7 @@#include <linux/filter.h> #include <linux/ptr_ring.h> #include <linux/bpf_trace.h> +#include <linux/bpf_patch.h> #include <linux/net_tstamp.h> #define DRV_NAME "veth"@@ -1659,6 +1660,18 @@ static int veth_xdp(struct net_device *dev, struct netdev_bpf *xdp) } }Quoted 15 lines
drivers/net/veth.c static int veth_xdp(struct net_device *dev, struct netdev_bpf *xdp) · line 1673
Quoted 11 lines
drivers/net/veth.c +11
-0+static void veth_unroll_kfunc (const struct bpf_prog *prog,u32 func_id, +struct bpf_patch *patch) +{ +if (func_id ==xdp_metadata_kfunc_id (XDP_METADATA_KFUNC_RX_TIMESTAMP_SUPPORTED )) { +/* return true; */ +bpf_patch_append (patch,BPF_MOV64_IMM (BPF_REG_0 ,1 )); + }else if (func_id ==xdp_metadata_kfunc_id (XDP_METADATA_KFUNC_RX_TIMESTAMP )) { +/* return ktime_get_mono_fast_ns(); */ +bpf_patch_append (patch,BPF_EMIT_CALL (ktime_get_mono_fast_ns)); + } +}So these look reasonable enough, but would be good to see some examples of kfunc implementations that don't just
BPF_CALLto a kernel function (with those helper wrappers we were discussing before).
Quoted 4 lines
Let's maybe add them if/when needed as we add more metadata support?
xdp_metadata_export_to_skbhas an example, and rfc 1/2 have more examples, so it shouldn't be a problem to resurrect them back at some point?
Well, the reason I asked for them is that I think having to maintain the BPF code generation in the drivers is probably the biggest drawback of the kfunc approach, so it would be good to be relatively sure that we can manage that complexity (via helpers) before we commit to this :)
-Toke
Re: [xdp-hints] Re: [PATCH bpf-next 05/11] veth: Support rx timestamp metadata for xdp
Quoted 65 lines · Toke Høiland-Jørgensen
Quoted 57 lines · Stanislav Fomichev
Quoted 40 lines · Toke Høiland-Jørgensen
Quoted 37 lines · Stanislav Fomichev
The goal is to enable end-to-end testing of the metadata for
AF_XDP. Currentrx_timestampkfunc returns current time which should be enough to exercise this new functionality.Cc John Fastabend <[email protected]>Cc David Ahern <[email protected]>Cc Martin KaFai Lau <[email protected]>Cc Jakub Kicinski <[email protected]>Cc Willem de Bruijn <[email protected]>Cc Jesper Dangaard Brouer <[email protected]>Cc Anatoly Burakov <[email protected]>Cc Alexander Lobakin <[email protected]>Cc Magnus Karlsson <[email protected]>Cc Maryam Tahhan <[email protected]>Signed-off-by Stanislav Fomichev <[email protected]>--- drivers/net/veth.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+)drivers/net/veth.c +1
-0@@ -25,6 +25,7 @@#include <linux/filter.h> #include <linux/ptr_ring.h> #include <linux/bpf_trace.h> +#include <linux/bpf_patch.h> #include <linux/net_tstamp.h> #define DRV_NAME "veth"@@ -1659,6 +1660,18 @@ static int veth_xdp(struct net_device *dev, struct netdev_bpf *xdp) } }Quoted 15 lines
drivers/net/veth.c static int veth_xdp(struct net_device *dev, struct netdev_bpf *xdp) · line 1673
Quoted 11 lines
drivers/net/veth.c +11
-0+static void veth_unroll_kfunc (const struct bpf_prog *prog,u32 func_id, +struct bpf_patch *patch) +{ +if (func_id ==xdp_metadata_kfunc_id (XDP_METADATA_KFUNC_RX_TIMESTAMP_SUPPORTED )) { +/* return true; */ +bpf_patch_append (patch,BPF_MOV64_IMM (BPF_REG_0 ,1 )); + }else if (func_id ==xdp_metadata_kfunc_id (XDP_METADATA_KFUNC_RX_TIMESTAMP )) { +/* return ktime_get_mono_fast_ns(); */ +bpf_patch_append (patch,BPF_EMIT_CALL (ktime_get_mono_fast_ns)); + } +}So these look reasonable enough, but would be good to see some examples of kfunc implementations that don't just
BPF_CALLto a kernel function (with those helper wrappers we were discussing before).Quoted 4 lines
Let's maybe add them if/when needed as we add more metadata support?
xdp_metadata_export_to_skbhas an example, and rfc 1/2 have more examples, so it shouldn't be a problem to resurrect them back at some point?
Quoted 4 lines
Well, the reason I asked for them is that I think having to maintain the BPF code generation in the drivers is probably the biggest drawback of the kfunc approach, so it would be good to be relatively sure that we can manage that complexity (via helpers) before we commit to this :)
Right, and I've added a bunch of examples in v2 rfc so we can judge whether that complexity is manageable or not :-)
Do you want me to add those wrappers you've back without any real users? Because I had to remove my veth tstamp accessors due to John/Jesper objections; I can maybe bring some of this back gated by some static_branch to avoid the fastpath cost?
John Fastabend
maintainerRe: [xdp-hints] Re: [PATCH bpf-next 05/11] veth: Support rx timestamp metadata for xdp
Quoted 71 lines · Stanislav Fomichev
Quoted 65 lines · Toke Høiland-Jørgensen
Quoted 57 lines · Stanislav Fomichev
Quoted 40 lines · Toke Høiland-Jørgensen
Quoted 37 lines · Stanislav Fomichev
The goal is to enable end-to-end testing of the metadata for
AF_XDP. Currentrx_timestampkfunc returns current time which should be enough to exercise this new functionality.Cc John Fastabend <[email protected]>Cc David Ahern <[email protected]>Cc Martin KaFai Lau <[email protected]>Cc Jakub Kicinski <[email protected]>Cc Willem de Bruijn <[email protected]>Cc Jesper Dangaard Brouer <[email protected]>Cc Anatoly Burakov <[email protected]>Cc Alexander Lobakin <[email protected]>Cc Magnus Karlsson <[email protected]>Cc Maryam Tahhan <[email protected]>Signed-off-by Stanislav Fomichev <[email protected]>--- drivers/net/veth.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+)drivers/net/veth.c +1
-0@@ -25,6 +25,7 @@#include <linux/filter.h> #include <linux/ptr_ring.h> #include <linux/bpf_trace.h> +#include <linux/bpf_patch.h> #include <linux/net_tstamp.h> #define DRV_NAME "veth"@@ -1659,6 +1660,18 @@ static int veth_xdp(struct net_device *dev, struct netdev_bpf *xdp) } }Quoted 15 lines
drivers/net/veth.c static int veth_xdp(struct net_device *dev, struct netdev_bpf *xdp) · line 1673
Quoted 11 lines
drivers/net/veth.c +11
-0+static void veth_unroll_kfunc (const struct bpf_prog *prog,u32 func_id, +struct bpf_patch *patch) +{ +if (func_id ==xdp_metadata_kfunc_id (XDP_METADATA_KFUNC_RX_TIMESTAMP_SUPPORTED )) { +/* return true; */ +bpf_patch_append (patch,BPF_MOV64_IMM (BPF_REG_0 ,1 )); + }else if (func_id ==xdp_metadata_kfunc_id (XDP_METADATA_KFUNC_RX_TIMESTAMP )) { +/* return ktime_get_mono_fast_ns(); */ +bpf_patch_append (patch,BPF_EMIT_CALL (ktime_get_mono_fast_ns)); + } +}So these look reasonable enough, but would be good to see some examples of kfunc implementations that don't just
BPF_CALLto a kernel function (with those helper wrappers we were discussing before).Quoted 4 lines
Let's maybe add them if/when needed as we add more metadata support?
xdp_metadata_export_to_skbhas an example, and rfc 1/2 have more examples, so it shouldn't be a problem to resurrect them back at some point?Quoted 4 lines
Well, the reason I asked for them is that I think having to maintain the BPF code generation in the drivers is probably the biggest drawback of the kfunc approach, so it would be good to be relatively sure that we can manage that complexity (via helpers) before we commit to this :)
Quoted 6 lines
Right, and I've added a bunch of examples in v2 rfc so we can judge whether that complexity is manageable or not :-)
Do you want me to add those wrappers you've back without any real users? Because I had to remove my veth tstamp accessors due to John/Jesper objections; I can maybe bring some of this back gated by somestatic_branchto avoid the fastpath cost?
I missed the context a bit what did you mean "would be good to see some examples of kfunc implementations that don't just BPF_CALL to a kernel function"? In this case do you mean BPF code directly without the call?
Early on I thought we should just expose the rx_descriptor which would be roughly the same right? (difference being code embedded in driver vs a lib) Trouble I ran into is driver code using seqlock_t and mutexs which wasn't as straight forward as the simpler just read it from the descriptor. For example in mlx getting the ts would be easy from BPF with the mlx4_cqe struct exposed
u64 mlx4_en_get_cqe_ts(struct mlx4_cqe *cqe)
{
u64 hi, lo;
struct mlx4_ts_cqe *ts_cqe = (struct mlx4_ts_cqe *)cqe;
lo = (u64)be16_to_cpu(ts_cqe->timestamp_lo);
hi = ((u64)be32_to_cpu(ts_cqe->timestamp_hi) + !lo) << 16;
return hi | lo;
}but converting that to nsec is a bit annoying,
void mlx4_en_fill_hwtstamps(struct mlx4_en_dev *mdev,
struct skb_shared_hwtstamps *hwts, u64 timestamp)
{
unsigned int seq;
u64 nsec;
do {
seq = read_seqbegin(&mdev->clock_lock);
nsec = timecounter_cyc2time(&mdev->clock, timestamp);
} while (read_seqretry(&mdev->clock_lock, seq));
memset(hwts, 0, sizeof(struct skb_shared_hwtstamps));
hwts->hwtstamp = ns_to_ktime(nsec);
}I think the nsec is what you really want.
With all the drivers doing slightly different ops we would have to create read_seqbegin, read_seqretry, mutex_lock, ... to get at least the mlx and ice drivers it looks like we would need some more BPF primitives/helpers. Looks like some more work is needed on ice driver though to get rx tstamps on all packets.
Anyways this convinced me real devices will probably use BPF_CALL and not BPF insns directly.
Martin KaFai Lau
reviewerRe: [xdp-hints] Re: [PATCH bpf-next 05/11] veth: Support rx timestamp metadata for xdp
Quoted 75 lines · John Fastabend
Quoted 26 lines
Quoted 21 lines
Quoted 16 lines
Quoted 7 lines
Quoted 7 lines
drivers/net/veth.c +7
-0+static void veth_unroll_kfunc (const struct bpf_prog *prog,u32 func_id, +struct bpf_patch *patch) +{ +if (func_id ==xdp_metadata_kfunc_id (XDP_METADATA_KFUNC_RX_TIMESTAMP_SUPPORTED )) { +/* return true; */ +bpf_patch_append (patch,BPF_MOV64_IMM (BPF_REG_0 ,1 )); + }else if (func_id ==xdp_metadata_kfunc_id (XDP_METADATA_KFUNC_RX_TIMESTAMP )) {Quoted 8 lines
drivers/net/veth.c static int veth_xdp(struct net_device *dev, struct netdev_bpf *xdp) · line 1673
Quoted 4 lines
drivers/net/veth.c +4
-0+/* return ktime_get_mono_fast_ns(); */ +bpf_patch_append (patch,BPF_EMIT_CALL (ktime_get_mono_fast_ns)); + } +}So these look reasonable enough, but would be good to see some examples of kfunc implementations that don't just
BPF_CALLto a kernel function (with those helper wrappers we were discussing before).Quoted 4 lines
Let's maybe add them if/when needed as we add more metadata support?
xdp_metadata_export_to_skbhas an example, and rfc 1/2 have more examples, so it shouldn't be a problem to resurrect them back at some point?Quoted 4 lines
Well, the reason I asked for them is that I think having to maintain the BPF code generation in the drivers is probably the biggest drawback of the kfunc approach, so it would be good to be relatively sure that we can manage that complexity (via helpers) before we commit to this :)
Quoted 6 lines
Right, and I've added a bunch of examples in v2 rfc so we can judge whether that complexity is manageable or not :-)
Do you want me to add those wrappers you've back without any real users? Because I had to remove my veth tstamp accessors due to John/Jesper objections; I can maybe bring some of this back gated by somestatic_branchto avoid the fastpath cost?I missed the context a bit what did you mean "would be good to see some examples of kfunc implementations that don't just
BPF_CALLto a kernel function"? In this case do you mean BPF code directly without the call?Early on I thought we should just expose the
rx_descriptorwhich would be roughly the same right? (difference being code embedded in driver vs a lib) Trouble I ran into is driver code usingseqlock_tand mutexs which wasn't as straight forward as the simpler just read it from the descriptor. For example in mlx getting the ts would be easy from BPF with themlx4_cqestruct exposedu64
mlx4_en_get_cqe_ts(struct mlx4_cqe *cqe){ u64 hi, lo; struct mlx4_ts_cqe *ts_cqe = (struct mlx4_ts_cqe *)cqe; lo = (u64)be16_to_cpu(ts_cqe->timestamp_lo); hi = ((u64)be32_to_cpu(ts_cqe->timestamp_hi) + !lo) << 16; return hi | lo; }but converting that to nsec is a bit annoying,
void mlx4_en_fill_hwtstamps(struct
mlx4_en_dev*mdev,
structskb_shared_hwtstamps*hwts, u64 timestamp){ unsigned int seq; u64 nsec; do { seq = read_seqbegin(&mdev->clock_lock); nsec = timecounter_cyc2time(&mdev->clock, timestamp); } while (read_seqretry(&mdev->clock_lock, seq)); memset(hwts, 0, sizeof(struct skb_shared_hwtstamps)); hwts->hwtstamp = ns_to_ktime(nsec); }I think the nsec is what you really want.
Quoted 8 lines
With all the drivers doing slightly different ops we would have to create
read_seqbegin,read_seqretry,mutex_lock, ... to get at least the mlx and ice drivers it looks like we would need some more BPF primitives/helpers. Looks like some more work is needed on ice driver though to get rx tstamps on all packets.Anyways this convinced me real devices will probably use
BPF_CALLand not BPF insns directly.
Some of the mlx5 path looks like this:
#define REAL_TIME_TO_NS(hi, low) (((u64)hi) * NSEC_PER_SEC + ((u64)low))
static inline ktime_t mlx5_real_time_cyc2time(struct mlx5_clock *clock,
u64 timestamp)
{
u64 time = REAL_TIME_TO_NS(timestamp >> 32, timestamp & 0xFFFFFFFF);
return ns_to_ktime(time);
}If some hints are harder to get, then just doing a kfunc call is better.
csum may have a better chance to inline?
Regardless, BPF in-lining is a well solved problem and used in many bpf helpers already, so there are many examples in the kernel. I don't think it is necessary to block this series because of missing some helper wrappers for inlining. The driver can always start with the simpler kfunc call first and optimize later if some hints from the drivers allow it.
Re: [xdp-hints] Re: [PATCH bpf-next 05/11] veth: Support rx timestamp metadata for xdp
Quoted 91 lines · Martin KaFai Lau
Quoted 75 lines · John Fastabend
Quoted 26 lines
Quoted 21 lines
Quoted 16 lines
Quoted 7 lines
Quoted 7 lines
(quoted diff) +7
-0+static void veth_unroll_kfunc(const struct bpf_prog *prog, u32 func_id, + struct bpf_patch *patch) +{ + if (func_id == xdp_metadata_kfunc_id(XDP_METADATA_KFUNC_RX_TIMESTAMP_SUPPORTED)) { + /* return true; */ + bpf_patch_append(patch, BPF_MOV64_IMM(BPF_REG_0, 1)); + } else if (func_id == xdp_metadata_kfunc_id(XDP_METADATA_KFUNC_RX_TIMESTAMP)) {Quoted 8 lines
Review
Quoted 4 lines
(quoted diff) +4
-0+ /* return ktime_get_mono_fast_ns(); */ + bpf_patch_append(patch, BPF_EMIT_CALL(ktime_get_mono_fast_ns)); + } +}So these look reasonable enough, but would be good to see some examples of kfunc implementations that don't just
BPF_CALLto a kernel function (with those helper wrappers we were discussing before).Quoted 4 lines
Let's maybe add them if/when needed as we add more metadata support?
xdp_metadata_export_to_skbhas an example, and rfc 1/2 have more examples, so it shouldn't be a problem to resurrect them back at some point?Quoted 4 lines
Well, the reason I asked for them is that I think having to maintain the BPF code generation in the drivers is probably the biggest drawback of the kfunc approach, so it would be good to be relatively sure that we can manage that complexity (via helpers) before we commit to this :)
Quoted 6 lines
Right, and I've added a bunch of examples in v2 rfc so we can judge whether that complexity is manageable or not :-)
Do you want me to add those wrappers you've back without any real users? Because I had to remove my veth tstamp accessors due to John/Jesper objections; I can maybe bring some of this back gated by somestatic_branchto avoid the fastpath cost?I missed the context a bit what did you mean "would be good to see some examples of kfunc implementations that don't just
BPF_CALLto a kernel function"? In this case do you mean BPF code directly without the call?Early on I thought we should just expose the
rx_descriptorwhich would be roughly the same right? (difference being code embedded in driver vs a lib) Trouble I ran into is driver code usingseqlock_tand mutexs which wasn't as straight forward as the simpler just read it from the descriptor. For example in mlx getting the ts would be easy from BPF with themlx4_cqestruct exposedu64
mlx4_en_get_cqe_ts(struct mlx4_cqe *cqe){ u64 hi, lo; struct mlx4_ts_cqe *ts_cqe = (struct mlx4_ts_cqe *)cqe; lo = (u64)be16_to_cpu(ts_cqe->timestamp_lo); hi = ((u64)be32_to_cpu(ts_cqe->timestamp_hi) + !lo) << 16; return hi | lo; }but converting that to nsec is a bit annoying,
void mlx4_en_fill_hwtstamps(struct
mlx4_en_dev*mdev,
structskb_shared_hwtstamps*hwts, u64 timestamp){ unsigned int seq; u64 nsec; do { seq = read_seqbegin(&mdev->clock_lock); nsec = timecounter_cyc2time(&mdev->clock, timestamp); } while (read_seqretry(&mdev->clock_lock, seq)); memset(hwts, 0, sizeof(struct skb_shared_hwtstamps)); hwts->hwtstamp = ns_to_ktime(nsec); }I think the nsec is what you really want.
Quoted 8 lines
With all the drivers doing slightly different ops we would have to create
read_seqbegin,read_seqretry,mutex_lock, ... to get at least the mlx and ice drivers it looks like we would need some more BPF primitives/helpers. Looks like some more work is needed on ice driver though to get rx tstamps on all packets.Anyways this convinced me real devices will probably use
BPF_CALLand not BPF insns directly.Some of the mlx5 path looks like this:
#define
REAL_TIME_TO_NS(hi, low)(((u64)hi) *NSEC_PER_SEC+ ((u64)low))static inline
ktime_tmlx5_real_time_cyc2time(structmlx5_clock*clock,
u64 timestamp)
Quoted 7 lines
{ u64 time = REAL_TIME_TO_NS(timestamp >> 32, timestamp & 0xFFFFFFFF); return ns_to_ktime(time); }If some hints are harder to get, then just doing a kfunc call is better.
Sure, but if we end up having a full function call for every field in the metadata, that will end up having a significant performance impact on the XDP data path (thinking mostly about the skb metadata case here, which will collect several bits of metadata).
Quoted 1 line
csum may have a better chance to inline?
Yup, I agree. Including that also makes it possible to benchmark this series against Jesper's; which I think we should definitely be doing before merging this.
Quoted 6 lines
Regardless, BPF in-lining is a well solved problem and used in many bpf helpers already, so there are many examples in the kernel. I don't think it is necessary to block this series because of missing some helper wrappers for inlining. The driver can always start with the simpler kfunc call first and optimize later if some hints from the drivers allow it.
Well, "solved" in the sense of "there are a few handfuls of core BPF people who know how to do it". My concern is that we'll end up with either the BPF devs having to maintain all these bits of BPF byte code in all the drivers; or drivers just punting to regular function calls because the inlining is too complicated, with sub-par performance as per the above. I don't think we should just hand-wave this away as "solved", but rather treat this as an integral part of the initial series.
-Toke
Martin KaFai Lau
reviewerRe: [xdp-hints] Re: [PATCH bpf-next 05/11] veth: Support rx timestamp metadata for xdp
Quoted 99 lines · Toke Høiland-Jørgensen
Quoted 97 lines · Martin KaFai Lau
Quoted 75 lines · John Fastabend
Quoted 26 lines
Quoted 21 lines
Quoted 16 lines
Quoted 7 lines
Quoted 7 lines
(quoted diff) +7
-0+static void veth_unroll_kfunc(const struct bpf_prog *prog, u32 func_id, + struct bpf_patch *patch) +{ + if (func_id == xdp_metadata_kfunc_id(XDP_METADATA_KFUNC_RX_TIMESTAMP_SUPPORTED)) { + /* return true; */ + bpf_patch_append(patch, BPF_MOV64_IMM(BPF_REG_0, 1)); + } else if (func_id == xdp_metadata_kfunc_id(XDP_METADATA_KFUNC_RX_TIMESTAMP)) {Quoted 8 lines
Review
Quoted 4 lines
(quoted diff) +4
-0+ /* return ktime_get_mono_fast_ns(); */ + bpf_patch_append(patch, BPF_EMIT_CALL(ktime_get_mono_fast_ns)); + } +}So these look reasonable enough, but would be good to see some examples of kfunc implementations that don't just
BPF_CALLto a kernel function (with those helper wrappers we were discussing before).Quoted 4 lines
Let's maybe add them if/when needed as we add more metadata support?
xdp_metadata_export_to_skbhas an example, and rfc 1/2 have more examples, so it shouldn't be a problem to resurrect them back at some point?Quoted 4 lines
Well, the reason I asked for them is that I think having to maintain the BPF code generation in the drivers is probably the biggest drawback of the kfunc approach, so it would be good to be relatively sure that we can manage that complexity (via helpers) before we commit to this :)
Quoted 6 lines
Right, and I've added a bunch of examples in v2 rfc so we can judge whether that complexity is manageable or not :-)
Do you want me to add those wrappers you've back without any real users? Because I had to remove my veth tstamp accessors due to John/Jesper objections; I can maybe bring some of this back gated by somestatic_branchto avoid the fastpath cost?I missed the context a bit what did you mean "would be good to see some examples of kfunc implementations that don't just
BPF_CALLto a kernel function"? In this case do you mean BPF code directly without the call?Early on I thought we should just expose the
rx_descriptorwhich would be roughly the same right? (difference being code embedded in driver vs a lib) Trouble I ran into is driver code usingseqlock_tand mutexs which wasn't as straight forward as the simpler just read it from the descriptor. For example in mlx getting the ts would be easy from BPF with themlx4_cqestruct exposedu64
mlx4_en_get_cqe_ts(struct mlx4_cqe *cqe){ u64 hi, lo; struct mlx4_ts_cqe *ts_cqe = (struct mlx4_ts_cqe *)cqe; lo = (u64)be16_to_cpu(ts_cqe->timestamp_lo); hi = ((u64)be32_to_cpu(ts_cqe->timestamp_hi) + !lo) << 16; return hi | lo; }but converting that to nsec is a bit annoying,
void mlx4_en_fill_hwtstamps(struct
mlx4_en_dev*mdev,
structskb_shared_hwtstamps*hwts, u64 timestamp){ unsigned int seq; u64 nsec; do { seq = read_seqbegin(&mdev->clock_lock); nsec = timecounter_cyc2time(&mdev->clock, timestamp); } while (read_seqretry(&mdev->clock_lock, seq)); memset(hwts, 0, sizeof(struct skb_shared_hwtstamps)); hwts->hwtstamp = ns_to_ktime(nsec); }I think the nsec is what you really want.
Quoted 8 lines
With all the drivers doing slightly different ops we would have to create
read_seqbegin,read_seqretry,mutex_lock, ... to get at least the mlx and ice drivers it looks like we would need some more BPF primitives/helpers. Looks like some more work is needed on ice driver though to get rx tstamps on all packets.Anyways this convinced me real devices will probably use
BPF_CALLand not BPF insns directly.Some of the mlx5 path looks like this:
#define
REAL_TIME_TO_NS(hi, low)(((u64)hi) *NSEC_PER_SEC+ ((u64)low))static inline
ktime_tmlx5_real_time_cyc2time(structmlx5_clock*clock,
u64 timestamp){ u64 time = REAL_TIME_TO_NS(timestamp >> 32, timestamp & 0xFFFFFFFF); return ns_to_ktime(time); }
Quoted 8 lines
Quoted 1 line
If some hints are harder to get, then just doing a kfunc call is better.
Sure, but if we end up having a full function call for every field in the metadata, that will end up having a significant performance impact on the XDP data path (thinking mostly about the skb metadata case here, which will collect several bits of metadata).
Quoted 1 line
csum may have a better chance to inline?
It will be useful if the skb_metadata can get at least one more field like csum or vlan.
Quoted 4 lines
Yup, I agree. Including that also makes it possible to benchmark this series against Jesper's; which I think we should definitely be doing before merging this.
If the hint needs a lock to obtain it, it is not cheap to begin with regardless of kfunc or not. Also, there is bpf_xdp_metadata_rx_timestamp_supported() before doing the bpf_xdp_metadata_rx_timestamp().
This set gives the xdp prog a flexible way to avoid getting all hints (some of them require a lock) if all the xdp prog needs is a csum. imo, giving this flexibility to the xdp prog is the important thing for this set in terms of performance.
Quoted 8 lines
Quoted 7 lines
Regardless, BPF in-lining is a well solved problem and used in many bpf helpers already, so there are many examples in the kernel. I don't think it is necessary to block this series because of missing some helper wrappers for inlining. The driver can always start with the simpler kfunc call first and optimize later if some hints from the drivers allow it.
Quoted 7 lines
Well, "solved" in the sense of "there are a few handfuls of core BPF people who know how to do it". My concern is that we'll end up with either the BPF devs having to maintain all these bits of BPF byte code in all the drivers; or drivers just punting to regular function calls because the inlining is too complicated, with sub-par performance as per the above. I don't think we should just hand-wave this away as "solved", but rather treat this as an integral part of the initial series.
In terms of complexity/maintainability, I don't think the driver needs to inline like hundreds of bpf insn for a hint which is already a good signal that it should just call kfunc. For a simple hint, xdp_metadata_export_to_skb() is a good example to start with and I am not sure how much a helper wrapper can do to simplify things further since each driver inline code is going to be different.
The community's review will definitely be useful for the first few drivers when the driver changes is posted to the list, and the latter drivers will have easier time to follow like the xdp was initially introduced to the few drivers first. When there are things to refactor after enough drivers supporting it, that will be a better time to revisit.
John Fastabend
maintainerRe: [xdp-hints] Re: [PATCH bpf-next 05/11] veth: Support rx timestamp metadata for xdp
In reply to Toke Høiland-JørgensenQuoted 106 lines · Toke Høiland-Jørgensen
Quoted 91 lines · Martin KaFai Lau
Quoted 75 lines · John Fastabend
Quoted 26 lines
Quoted 21 lines
Quoted 16 lines
Quoted 7 lines
Quoted 7 lines
(quoted diff) +7
-0+static void veth_unroll_kfunc(const struct bpf_prog *prog, u32 func_id, + struct bpf_patch *patch) +{ + if (func_id == xdp_metadata_kfunc_id(XDP_METADATA_KFUNC_RX_TIMESTAMP_SUPPORTED)) { + /* return true; */ + bpf_patch_append(patch, BPF_MOV64_IMM(BPF_REG_0, 1)); + } else if (func_id == xdp_metadata_kfunc_id(XDP_METADATA_KFUNC_RX_TIMESTAMP)) {Quoted 8 lines
Review
Quoted 4 lines
(quoted diff) +4
-0+ /* return ktime_get_mono_fast_ns(); */ + bpf_patch_append(patch, BPF_EMIT_CALL(ktime_get_mono_fast_ns)); + } +}So these look reasonable enough, but would be good to see some examples of kfunc implementations that don't just
BPF_CALLto a kernel function (with those helper wrappers we were discussing before).Quoted 4 lines
Let's maybe add them if/when needed as we add more metadata support?
xdp_metadata_export_to_skbhas an example, and rfc 1/2 have more examples, so it shouldn't be a problem to resurrect them back at some point?Quoted 4 lines
Well, the reason I asked for them is that I think having to maintain the BPF code generation in the drivers is probably the biggest drawback of the kfunc approach, so it would be good to be relatively sure that we can manage that complexity (via helpers) before we commit to this :)
Quoted 6 lines
Right, and I've added a bunch of examples in v2 rfc so we can judge whether that complexity is manageable or not :-)
Do you want me to add those wrappers you've back without any real users? Because I had to remove my veth tstamp accessors due to John/Jesper objections; I can maybe bring some of this back gated by somestatic_branchto avoid the fastpath cost?I missed the context a bit what did you mean "would be good to see some examples of kfunc implementations that don't just
BPF_CALLto a kernel function"? In this case do you mean BPF code directly without the call?Early on I thought we should just expose the
rx_descriptorwhich would be roughly the same right? (difference being code embedded in driver vs a lib) Trouble I ran into is driver code usingseqlock_tand mutexs which wasn't as straight forward as the simpler just read it from the descriptor. For example in mlx getting the ts would be easy from BPF with themlx4_cqestruct exposedu64
mlx4_en_get_cqe_ts(struct mlx4_cqe *cqe){ u64 hi, lo; struct mlx4_ts_cqe *ts_cqe = (struct mlx4_ts_cqe *)cqe; lo = (u64)be16_to_cpu(ts_cqe->timestamp_lo); hi = ((u64)be32_to_cpu(ts_cqe->timestamp_hi) + !lo) << 16; return hi | lo; }but converting that to nsec is a bit annoying,
void mlx4_en_fill_hwtstamps(struct
mlx4_en_dev*mdev,
structskb_shared_hwtstamps*hwts, u64 timestamp){ unsigned int seq; u64 nsec; do { seq = read_seqbegin(&mdev->clock_lock); nsec = timecounter_cyc2time(&mdev->clock, timestamp); } while (read_seqretry(&mdev->clock_lock, seq)); memset(hwts, 0, sizeof(struct skb_shared_hwtstamps)); hwts->hwtstamp = ns_to_ktime(nsec); }I think the nsec is what you really want.
Quoted 8 lines
With all the drivers doing slightly different ops we would have to create
read_seqbegin,read_seqretry,mutex_lock, ... to get at least the mlx and ice drivers it looks like we would need some more BPF primitives/helpers. Looks like some more work is needed on ice driver though to get rx tstamps on all packets.Anyways this convinced me real devices will probably use
BPF_CALLand not BPF insns directly.Some of the mlx5 path looks like this:
#define
REAL_TIME_TO_NS(hi, low)(((u64)hi) *NSEC_PER_SEC+ ((u64)low))static inline
ktime_tmlx5_real_time_cyc2time(structmlx5_clock*clock,
u64 timestamp)Quoted 7 lines
{ u64 time = REAL_TIME_TO_NS(timestamp >> 32, timestamp & 0xFFFFFFFF); return ns_to_ktime(time); }If some hints are harder to get, then just doing a kfunc call is better.
Sure, but if we end up having a full function call for every field in the metadata, that will end up having a significant performance impact on the XDP data path (thinking mostly about the skb metadata case here, which will collect several bits of metadata).
Quoted 5 lines
Quoted 1 line
csum may have a better chance to inline?
Yup, I agree. Including that also makes it possible to benchmark this series against Jesper's; which I think we should definitely be doing before merging this.
Good point I got sort of singularly focused on timestamp because I have a use case for it now.
Also hash is often sitting in the rx descriptor.
Quoted 8 lines
Quoted 7 lines
Regardless, BPF in-lining is a well solved problem and used in many bpf helpers already, so there are many examples in the kernel. I don't think it is necessary to block this series because of missing some helper wrappers for inlining. The driver can always start with the simpler kfunc call first and optimize later if some hints from the drivers allow it.
Quoted 7 lines
Well, "solved" in the sense of "there are a few handfuls of core BPF people who know how to do it". My concern is that we'll end up with either the BPF devs having to maintain all these bits of BPF byte code in all the drivers; or drivers just punting to regular function calls because the inlining is too complicated, with sub-par performance as per the above. I don't think we should just hand-wave this away as "solved", but rather treat this as an integral part of the initial series.
This was my motivation for pushing the rx_descriptor into the xdp_buff. At this point if I'm going to have a kfunc call into the driver and have the driver rewrite the code into some BPF instructions I would just assume maintain this as a library code where I can hook it into my BPF program directly from user space. Maybe a few drivers will support all the things I want to read, but we run on lots of hardware (mlx, intel, eks, azure, gke, etc) and its been a lot of work to just get the basic feature parity. I also don't want to run around writing driver code for each vendor if I can avoid it. Having raw access to the rx descriptor gets me the escape hatch where I can just do it myself. And the last piece of info from my point of view (Tetragon, Cilium) I can run whatever libs I want and freely upgrade libbpf and cilium/ebpf but have a lot less ability to get users to upgrade kernels outside the LTS they picked. Meaning I can add new things much easier if its lifted into BPF code placed by user space.
I appreciate that it means I import the problem of hardware detection and BTF CO-RE on networking codes, but we've already solved these problems for other reasons. For example just configuring the timestamp is a bit of an exercise in does my hardware support timestamping and does it support timestamping the packets I care about, e.g. all pkts, just ptp pkts, etc.
I don't think they are mutual exclusive with this series though because I can't see how to write these timestamping logic directly in BPF. But for rxhash and csum it seems doable. My preference is to have both the kfuncs and expose the descriptor directly.
.John
Re: [xdp-hints] Re: [PATCH bpf-next 05/11] veth: Support rx timestamp metadata for xdp
Quoted 110 lines · John Fastabend
Quoted 108 lines · Toke Høiland-Jørgensen
Quoted 91 lines · Martin KaFai Lau
Quoted 75 lines · John Fastabend
Quoted 26 lines
Quoted 21 lines
Quoted 16 lines
Quoted 7 lines
Quoted 7 lines
(quoted diff) +7
-0+static void veth_unroll_kfunc(const struct bpf_prog *prog, u32 func_id, + struct bpf_patch *patch) +{ + if (func_id == xdp_metadata_kfunc_id(XDP_METADATA_KFUNC_RX_TIMESTAMP_SUPPORTED)) { + /* return true; */ + bpf_patch_append(patch, BPF_MOV64_IMM(BPF_REG_0, 1)); + } else if (func_id == xdp_metadata_kfunc_id(XDP_METADATA_KFUNC_RX_TIMESTAMP)) {Quoted 8 lines
Review
Quoted 4 lines
(quoted diff) +4
-0+ /* return ktime_get_mono_fast_ns(); */ + bpf_patch_append(patch, BPF_EMIT_CALL(ktime_get_mono_fast_ns)); + } +}So these look reasonable enough, but would be good to see some examples of kfunc implementations that don't just
BPF_CALLto a kernel function (with those helper wrappers we were discussing before).Quoted 4 lines
Let's maybe add them if/when needed as we add more metadata support?
xdp_metadata_export_to_skbhas an example, and rfc 1/2 have more examples, so it shouldn't be a problem to resurrect them back at some point?Quoted 4 lines
Well, the reason I asked for them is that I think having to maintain the BPF code generation in the drivers is probably the biggest drawback of the kfunc approach, so it would be good to be relatively sure that we can manage that complexity (via helpers) before we commit to this :)
Quoted 6 lines
Right, and I've added a bunch of examples in v2 rfc so we can judge whether that complexity is manageable or not :-)
Do you want me to add those wrappers you've back without any real users? Because I had to remove my veth tstamp accessors due to John/Jesper objections; I can maybe bring some of this back gated by somestatic_branchto avoid the fastpath cost?I missed the context a bit what did you mean "would be good to see some examples of kfunc implementations that don't just
BPF_CALLto a kernel function"? In this case do you mean BPF code directly without the call?Early on I thought we should just expose the
rx_descriptorwhich would be roughly the same right? (difference being code embedded in driver vs a lib) Trouble I ran into is driver code usingseqlock_tand mutexs which wasn't as straight forward as the simpler just read it from the descriptor. For example in mlx getting the ts would be easy from BPF with themlx4_cqestruct exposedu64
mlx4_en_get_cqe_ts(struct mlx4_cqe *cqe){ u64 hi, lo; struct mlx4_ts_cqe *ts_cqe = (struct mlx4_ts_cqe *)cqe; lo = (u64)be16_to_cpu(ts_cqe->timestamp_lo); hi = ((u64)be32_to_cpu(ts_cqe->timestamp_hi) + !lo) << 16; return hi | lo; }but converting that to nsec is a bit annoying,
void mlx4_en_fill_hwtstamps(struct
mlx4_en_dev*mdev,
structskb_shared_hwtstamps*hwts, u64 timestamp){ unsigned int seq; u64 nsec; do { seq = read_seqbegin(&mdev->clock_lock); nsec = timecounter_cyc2time(&mdev->clock, timestamp); } while (read_seqretry(&mdev->clock_lock, seq)); memset(hwts, 0, sizeof(struct skb_shared_hwtstamps)); hwts->hwtstamp = ns_to_ktime(nsec); }I think the nsec is what you really want.
Quoted 8 lines
With all the drivers doing slightly different ops we would have to create
read_seqbegin,read_seqretry,mutex_lock, ... to get at least the mlx and ice drivers it looks like we would need some more BPF primitives/helpers. Looks like some more work is needed on ice driver though to get rx tstamps on all packets.Anyways this convinced me real devices will probably use
BPF_CALLand not BPF insns directly.Some of the mlx5 path looks like this:
#define
REAL_TIME_TO_NS(hi, low)(((u64)hi) *NSEC_PER_SEC+ ((u64)low))static inline
ktime_tmlx5_real_time_cyc2time(structmlx5_clock*clock,
u64 timestamp)Quoted 7 lines
{ u64 time = REAL_TIME_TO_NS(timestamp >> 32, timestamp & 0xFFFFFFFF); return ns_to_ktime(time); }If some hints are harder to get, then just doing a kfunc call is better.
Sure, but if we end up having a full function call for every field in the metadata, that will end up having a significant performance impact on the XDP data path (thinking mostly about the skb metadata case here, which will collect several bits of metadata).
Quoted 1 line
csum may have a better chance to inline?
Quoted 8 lines
Quoted 3 lines
Yup, I agree. Including that also makes it possible to benchmark this series against Jesper's; which I think we should definitely be doing before merging this.
Good point I got sort of singularly focused on timestamp because I have a use case for it now.
Also hash is often sitting in the rx descriptor.
Ack, let me try to add something else (that's more inline-able) on the rx side for a v2.
Quoted 46 lines
Quoted 8 lines
Quoted 7 lines
Regardless, BPF in-lining is a well solved problem and used in many bpf helpers already, so there are many examples in the kernel. I don't think it is necessary to block this series because of missing some helper wrappers for inlining. The driver can always start with the simpler kfunc call first and optimize later if some hints from the drivers allow it.
Quoted 7 lines
Well, "solved" in the sense of "there are a few handfuls of core BPF people who know how to do it". My concern is that we'll end up with either the BPF devs having to maintain all these bits of BPF byte code in all the drivers; or drivers just punting to regular function calls because the inlining is too complicated, with sub-par performance as per the above. I don't think we should just hand-wave this away as "solved", but rather treat this as an integral part of the initial series.
This was my motivation for pushing the
rx_descriptorinto thexdp_buff. At this point if I'm going to have a kfunc call into the driver and have the driver rewrite the code into some BPF instructions I would just assume maintain this as a library code where I can hook it into my BPF program directly from user space. Maybe a few drivers will support all the things I want to read, but we run on lots of hardware (mlx, intel, eks, azure, gke, etc) and its been a lot of work to just get the basic feature parity. I also don't want to run around writing driver code for each vendor if I can avoid it. Having raw access to the rx descriptor gets me the escape hatch where I can just do it myself. And the last piece of info from my point of view (Tetragon, Cilium) I can run whatever libs I want and freely upgrade libbpf and cilium/ebpf but have a lot less ability to get users to upgrade kernels outside the LTS they picked. Meaning I can add new things much easier if its lifted into BPF code placed by user space.I appreciate that it means I import the problem of hardware detection and BTF CO-RE on networking codes, but we've already solved these problems for other reasons. For example just configuring the timestamp is a bit of an exercise in does my hardware support timestamping and does it support timestamping the packets I care about, e.g. all pkts, just ptp pkts, etc.
I don't think they are mutual exclusive with this series though because I can't see how to write these timestamping logic directly in BPF. But for rxhash and csum it seems doable. My preference is to have both the kfuncs and expose the descriptor directly.
.John
John Fastabend
maintainerRe: [xdp-hints] Re: [PATCH bpf-next 05/11] veth: Support rx timestamp metadata for xdp
Quoted 116 lines · Stanislav Fomichev
Quoted 114 lines · John Fastabend
Quoted 111 lines · Toke Høiland-Jørgensen
Quoted 91 lines · Martin KaFai Lau
Quoted 75 lines · John Fastabend
Quoted 26 lines
Quoted 21 lines
Quoted 16 lines
Quoted 7 lines
Quoted 7 lines
(quoted diff) +7
-0+static void veth_unroll_kfunc(const struct bpf_prog *prog, u32 func_id, + struct bpf_patch *patch) +{ + if (func_id == xdp_metadata_kfunc_id(XDP_METADATA_KFUNC_RX_TIMESTAMP_SUPPORTED)) { + /* return true; */ + bpf_patch_append(patch, BPF_MOV64_IMM(BPF_REG_0, 1)); + } else if (func_id == xdp_metadata_kfunc_id(XDP_METADATA_KFUNC_RX_TIMESTAMP)) {Quoted 8 lines
Review
Quoted 4 lines
(quoted diff) +4
-0+ /* return ktime_get_mono_fast_ns(); */ + bpf_patch_append(patch, BPF_EMIT_CALL(ktime_get_mono_fast_ns)); + } +}So these look reasonable enough, but would be good to see some examples of kfunc implementations that don't just
BPF_CALLto a kernel function (with those helper wrappers we were discussing before).Quoted 4 lines
Let's maybe add them if/when needed as we add more metadata support?
xdp_metadata_export_to_skbhas an example, and rfc 1/2 have more examples, so it shouldn't be a problem to resurrect them back at some point?Quoted 4 lines
Well, the reason I asked for them is that I think having to maintain the BPF code generation in the drivers is probably the biggest drawback of the kfunc approach, so it would be good to be relatively sure that we can manage that complexity (via helpers) before we commit to this :)
Quoted 6 lines
Right, and I've added a bunch of examples in v2 rfc so we can judge whether that complexity is manageable or not :-)
Do you want me to add those wrappers you've back without any real users? Because I had to remove my veth tstamp accessors due to John/Jesper objections; I can maybe bring some of this back gated by somestatic_branchto avoid the fastpath cost?I missed the context a bit what did you mean "would be good to see some examples of kfunc implementations that don't just
BPF_CALLto a kernel function"? In this case do you mean BPF code directly without the call?Early on I thought we should just expose the
rx_descriptorwhich would be roughly the same right? (difference being code embedded in driver vs a lib) Trouble I ran into is driver code usingseqlock_tand mutexs which wasn't as straight forward as the simpler just read it from the descriptor. For example in mlx getting the ts would be easy from BPF with themlx4_cqestruct exposedu64
mlx4_en_get_cqe_ts(struct mlx4_cqe *cqe){ u64 hi, lo; struct mlx4_ts_cqe *ts_cqe = (struct mlx4_ts_cqe *)cqe; lo = (u64)be16_to_cpu(ts_cqe->timestamp_lo); hi = ((u64)be32_to_cpu(ts_cqe->timestamp_hi) + !lo) << 16; return hi | lo; }but converting that to nsec is a bit annoying,
void mlx4_en_fill_hwtstamps(struct
mlx4_en_dev*mdev,
structskb_shared_hwtstamps*hwts, u64 timestamp){ unsigned int seq; u64 nsec; do { seq = read_seqbegin(&mdev->clock_lock); nsec = timecounter_cyc2time(&mdev->clock, timestamp); } while (read_seqretry(&mdev->clock_lock, seq)); memset(hwts, 0, sizeof(struct skb_shared_hwtstamps)); hwts->hwtstamp = ns_to_ktime(nsec); }I think the nsec is what you really want.
Quoted 8 lines
With all the drivers doing slightly different ops we would have to create
read_seqbegin,read_seqretry,mutex_lock, ... to get at least the mlx and ice drivers it looks like we would need some more BPF primitives/helpers. Looks like some more work is needed on ice driver though to get rx tstamps on all packets.Anyways this convinced me real devices will probably use
BPF_CALLand not BPF insns directly.Some of the mlx5 path looks like this:
#define
REAL_TIME_TO_NS(hi, low)(((u64)hi) *NSEC_PER_SEC+ ((u64)low))static inline
ktime_tmlx5_real_time_cyc2time(structmlx5_clock*clock,
u64 timestamp)Quoted 7 lines
{ u64 time = REAL_TIME_TO_NS(timestamp >> 32, timestamp & 0xFFFFFFFF); return ns_to_ktime(time); }If some hints are harder to get, then just doing a kfunc call is better.
Sure, but if we end up having a full function call for every field in the metadata, that will end up having a significant performance impact on the XDP data path (thinking mostly about the skb metadata case here, which will collect several bits of metadata).
Quoted 1 line
csum may have a better chance to inline?
Yup, I agree. Including that also makes it possible to benchmark this series against Jesper's; which I think we should definitely be doing before merging this.
Quoted 7 lines
Quoted 4 lines
Good point I got sort of singularly focused on timestamp because I have a use case for it now.
Also hash is often sitting in the rx descriptor.
Ack, let me try to add something else (that's more inline-able) on the rx side for a v2.
If you go with in-kernel BPF kfunc approach (vs user space side) I think you also need to add CO-RE to be friendly for driver developers? Otherwise they have to keep that read in sync with the descriptors? Also need to handle versioning of descriptors where depending on specific options and firmware and chip being enabled the descriptor might be moving around. Of course can push this all to developer, but seems not so nice when we have the machinery to do this and we handle it for all other structures.
With CO-RE you can simply do the rx_desc->hash and rx_desc->csum and expect CO-RE sorts it out based on currently running btf_id of the descriptor. If you go through normal path you get this for free of course.
.John
Re: [xdp-hints] Re: [PATCH bpf-next 05/11] veth: Support rx timestamp metadata for xdp
Quoted 135 lines · John Fastabend
Quoted 116 lines · Stanislav Fomichev
Quoted 114 lines · John Fastabend
Quoted 111 lines · Toke Høiland-Jørgensen
Quoted 91 lines · Martin KaFai Lau
Quoted 75 lines · John Fastabend
Quoted 26 lines
Quoted 21 lines
Quoted 16 lines
Quoted 7 lines
Quoted 7 lines
(quoted diff) +7
-0+static void veth_unroll_kfunc(const struct bpf_prog *prog, u32 func_id, + struct bpf_patch *patch) +{ + if (func_id == xdp_metadata_kfunc_id(XDP_METADATA_KFUNC_RX_TIMESTAMP_SUPPORTED)) { + /* return true; */ + bpf_patch_append(patch, BPF_MOV64_IMM(BPF_REG_0, 1)); + } else if (func_id == xdp_metadata_kfunc_id(XDP_METADATA_KFUNC_RX_TIMESTAMP)) {Quoted 8 lines
Review
Quoted 4 lines
(quoted diff) +4
-0+ /* return ktime_get_mono_fast_ns(); */ + bpf_patch_append(patch, BPF_EMIT_CALL(ktime_get_mono_fast_ns)); + } +}So these look reasonable enough, but would be good to see some examples of kfunc implementations that don't just
BPF_CALLto a kernel function (with those helper wrappers we were discussing before).Quoted 4 lines
Let's maybe add them if/when needed as we add more metadata support?
xdp_metadata_export_to_skbhas an example, and rfc 1/2 have more examples, so it shouldn't be a problem to resurrect them back at some point?Quoted 4 lines
Well, the reason I asked for them is that I think having to maintain the BPF code generation in the drivers is probably the biggest drawback of the kfunc approach, so it would be good to be relatively sure that we can manage that complexity (via helpers) before we commit to this :)
Quoted 6 lines
Right, and I've added a bunch of examples in v2 rfc so we can judge whether that complexity is manageable or not :-)
Do you want me to add those wrappers you've back without any real users? Because I had to remove my veth tstamp accessors due to John/Jesper objections; I can maybe bring some of this back gated by somestatic_branchto avoid the fastpath cost?I missed the context a bit what did you mean "would be good to see some examples of kfunc implementations that don't just
BPF_CALLto a kernel function"? In this case do you mean BPF code directly without the call?Early on I thought we should just expose the
rx_descriptorwhich would be roughly the same right? (difference being code embedded in driver vs a lib) Trouble I ran into is driver code usingseqlock_tand mutexs which wasn't as straight forward as the simpler just read it from the descriptor. For example in mlx getting the ts would be easy from BPF with themlx4_cqestruct exposedu64
mlx4_en_get_cqe_ts(struct mlx4_cqe *cqe){ u64 hi, lo; struct mlx4_ts_cqe *ts_cqe = (struct mlx4_ts_cqe *)cqe; lo = (u64)be16_to_cpu(ts_cqe->timestamp_lo); hi = ((u64)be32_to_cpu(ts_cqe->timestamp_hi) + !lo) << 16; return hi | lo; }but converting that to nsec is a bit annoying,
void mlx4_en_fill_hwtstamps(struct
mlx4_en_dev*mdev,
structskb_shared_hwtstamps*hwts, u64 timestamp){ unsigned int seq; u64 nsec; do { seq = read_seqbegin(&mdev->clock_lock); nsec = timecounter_cyc2time(&mdev->clock, timestamp); } while (read_seqretry(&mdev->clock_lock, seq)); memset(hwts, 0, sizeof(struct skb_shared_hwtstamps)); hwts->hwtstamp = ns_to_ktime(nsec); }I think the nsec is what you really want.
Quoted 8 lines
With all the drivers doing slightly different ops we would have to create
read_seqbegin,read_seqretry,mutex_lock, ... to get at least the mlx and ice drivers it looks like we would need some more BPF primitives/helpers. Looks like some more work is needed on ice driver though to get rx tstamps on all packets.Anyways this convinced me real devices will probably use
BPF_CALLand not BPF insns directly.Some of the mlx5 path looks like this:
#define
REAL_TIME_TO_NS(hi, low)(((u64)hi) *NSEC_PER_SEC+ ((u64)low))static inline
ktime_tmlx5_real_time_cyc2time(structmlx5_clock*clock,
u64 timestamp)Quoted 7 lines
{ u64 time = REAL_TIME_TO_NS(timestamp >> 32, timestamp & 0xFFFFFFFF); return ns_to_ktime(time); }If some hints are harder to get, then just doing a kfunc call is better.
Sure, but if we end up having a full function call for every field in the metadata, that will end up having a significant performance impact on the XDP data path (thinking mostly about the skb metadata case here, which will collect several bits of metadata).
Quoted 1 line
csum may have a better chance to inline?
Yup, I agree. Including that also makes it possible to benchmark this series against Jesper's; which I think we should definitely be doing before merging this.
Quoted 7 lines
Quoted 4 lines
Good point I got sort of singularly focused on timestamp because I have a use case for it now.
Also hash is often sitting in the rx descriptor.
Ack, let me try to add something else (that's more inline-able) on the rx side for a v2.
If you go with in-kernel BPF kfunc approach (vs user space side) I think you also need to add CO-RE to be friendly for driver developers? Otherwise they have to keep that read in sync with the descriptors? Also need to handle versioning of descriptors where depending on specific options and firmware and chip being enabled the descriptor might be moving around. Of course can push this all to developer, but seems not so nice when we have the machinery to do this and we handle it for all other structures.
Quoted 4 lines
With CO-RE you can simply do the
rx_desc->hashandrx_desc->csumand expect CO-RE sorts it out based on currently runningbtf_idof the descriptor. If you go through normal path you get this for free of course.
Doesn't look like the descriptors are as nice as you're trying to paint them (with clear hash/csum fields) :-) So not sure how much CO-RE would help.
At least looking at mlx4 rx_csum, the driver consults three different sets of flags to figure out the hash_type. Or am I just unlucky with mlx4?
Re: [xdp-hints] Re: [PATCH bpf-next 05/11] veth: Support rx timestamp metadata for xdp
Quoted 142 lines · Stanislav Fomichev
Quoted 135 lines · John Fastabend
Quoted 116 lines · Stanislav Fomichev
Quoted 114 lines · John Fastabend
Quoted 111 lines · Toke Høiland-Jørgensen
Quoted 91 lines · Martin KaFai Lau
Quoted 75 lines · John Fastabend
Quoted 26 lines
Quoted 21 lines
Quoted 16 lines
Quoted 7 lines
Quoted 7 lines
(quoted diff) +7
-0+static void veth_unroll_kfunc(const struct bpf_prog *prog, u32 func_id, + struct bpf_patch *patch) +{ + if (func_id == xdp_metadata_kfunc_id(XDP_METADATA_KFUNC_RX_TIMESTAMP_SUPPORTED)) { + /* return true; */ + bpf_patch_append(patch, BPF_MOV64_IMM(BPF_REG_0, 1)); + } else if (func_id == xdp_metadata_kfunc_id(XDP_METADATA_KFUNC_RX_TIMESTAMP)) {Quoted 8 lines
Review
Quoted 4 lines
(quoted diff) +4
-0+ /* return ktime_get_mono_fast_ns(); */ + bpf_patch_append(patch, BPF_EMIT_CALL(ktime_get_mono_fast_ns)); + } +}So these look reasonable enough, but would be good to see some examples of kfunc implementations that don't just
BPF_CALLto a kernel function (with those helper wrappers we were discussing before).Quoted 4 lines
Let's maybe add them if/when needed as we add more metadata support?
xdp_metadata_export_to_skbhas an example, and rfc 1/2 have more examples, so it shouldn't be a problem to resurrect them back at some point?Quoted 4 lines
Well, the reason I asked for them is that I think having to maintain the BPF code generation in the drivers is probably the biggest drawback of the kfunc approach, so it would be good to be relatively sure that we can manage that complexity (via helpers) before we commit to this :)
Quoted 6 lines
Right, and I've added a bunch of examples in v2 rfc so we can judge whether that complexity is manageable or not :-)
Do you want me to add those wrappers you've back without any real users? Because I had to remove my veth tstamp accessors due to John/Jesper objections; I can maybe bring some of this back gated by somestatic_branchto avoid the fastpath cost?I missed the context a bit what did you mean "would be good to see some examples of kfunc implementations that don't just
BPF_CALLto a kernel function"? In this case do you mean BPF code directly without the call?Early on I thought we should just expose the
rx_descriptorwhich would be roughly the same right? (difference being code embedded in driver vs a lib) Trouble I ran into is driver code usingseqlock_tand mutexs which wasn't as straight forward as the simpler just read it from the descriptor. For example in mlx getting the ts would be easy from BPF with themlx4_cqestruct exposedu64
mlx4_en_get_cqe_ts(struct mlx4_cqe *cqe){ u64 hi, lo; struct mlx4_ts_cqe *ts_cqe = (struct mlx4_ts_cqe *)cqe; lo = (u64)be16_to_cpu(ts_cqe->timestamp_lo); hi = ((u64)be32_to_cpu(ts_cqe->timestamp_hi) + !lo) << 16; return hi | lo; }but converting that to nsec is a bit annoying,
void mlx4_en_fill_hwtstamps(struct
mlx4_en_dev*mdev,
structskb_shared_hwtstamps*hwts, u64 timestamp){ unsigned int seq; u64 nsec; do { seq = read_seqbegin(&mdev->clock_lock); nsec = timecounter_cyc2time(&mdev->clock, timestamp); } while (read_seqretry(&mdev->clock_lock, seq)); memset(hwts, 0, sizeof(struct skb_shared_hwtstamps)); hwts->hwtstamp = ns_to_ktime(nsec); }I think the nsec is what you really want.
Quoted 8 lines
With all the drivers doing slightly different ops we would have to create
read_seqbegin,read_seqretry,mutex_lock, ... to get at least the mlx and ice drivers it looks like we would need some more BPF primitives/helpers. Looks like some more work is needed on ice driver though to get rx tstamps on all packets.Anyways this convinced me real devices will probably use
BPF_CALLand not BPF insns directly.Some of the mlx5 path looks like this:
#define
REAL_TIME_TO_NS(hi, low)(((u64)hi) *NSEC_PER_SEC+ ((u64)low))static inline
ktime_tmlx5_real_time_cyc2time(structmlx5_clock*clock,
u64 timestamp)Quoted 7 lines
{ u64 time = REAL_TIME_TO_NS(timestamp >> 32, timestamp & 0xFFFFFFFF); return ns_to_ktime(time); }If some hints are harder to get, then just doing a kfunc call is better.
Sure, but if we end up having a full function call for every field in the metadata, that will end up having a significant performance impact on the XDP data path (thinking mostly about the skb metadata case here, which will collect several bits of metadata).
Quoted 1 line
csum may have a better chance to inline?
Yup, I agree. Including that also makes it possible to benchmark this series against Jesper's; which I think we should definitely be doing before merging this.
Quoted 7 lines
Quoted 4 lines
Good point I got sort of singularly focused on timestamp because I have a use case for it now.
Also hash is often sitting in the rx descriptor.
Ack, let me try to add something else (that's more inline-able) on the rx side for a v2.
If you go with in-kernel BPF kfunc approach (vs user space side) I think you also need to add CO-RE to be friendly for driver developers? Otherwise they have to keep that read in sync with the descriptors? Also need to handle versioning of descriptors where depending on specific options and firmware and chip being enabled the descriptor might be moving around. Of course can push this all to developer, but seems not so nice when we have the machinery to do this and we handle it for all other structures.
Quoted 4 lines
With CO-RE you can simply do the
rx_desc->hashandrx_desc->csumand expect CO-RE sorts it out based on currently runningbtf_idof the descriptor. If you go through normal path you get this for free of course.
Quoted 6 lines
Doesn't look like the descriptors are as nice as you're trying to paint them (with clear hash/csum fields) :-) So not sure how much CO-RE would help.
At least looking at mlx4rx_csum, the driver consults three different sets of flags to figure out thehash_type. Or am I just unlucky with mlx4?
Which part are you talking about ?
hw_checksum = csum_unfold((__force __sum16)cqe->checksum);
is trivial enough for bpf prog to do if it has access to 'cqe' pointer which is what John is proposing (I think).
Re: [xdp-hints] Re: [PATCH bpf-next 05/11] veth: Support rx timestamp metadata for xdp
Quoted 151 lines · Alexei Starovoitov
Quoted 142 lines · Stanislav Fomichev
Quoted 135 lines · John Fastabend
Quoted 116 lines · Stanislav Fomichev
Quoted 114 lines · John Fastabend
Quoted 111 lines · Toke Høiland-Jørgensen
Quoted 91 lines · Martin KaFai Lau
Quoted 75 lines · John Fastabend
Quoted 26 lines
Quoted 21 lines
Quoted 16 lines
Quoted 7 lines
Quoted 7 lines
+static void veth_unroll_kfunc(const struct bpf_prog *prog, u32 func_id,
+ struct bpf_patch *patch)
+{
+ if (func_id == xdp_metadata_kfunc_id(XDP_METADATA_KFUNC_RX_TIMESTAMP_SUPPORTED)) {
+ /* return true; */
+ bpf_patch_append(patch, BPF_MOV64_IMM(BPF_REG_0, 1));
+ } else if (func_id == xdp_metadata_kfunc_id(XDP_METADATA_KFUNC_RX_TIMESTAMP)) {Quoted 8 lines
Quoted 4 lines
+ /* return ktime_get_mono_fast_ns(); */
+ bpf_patch_append(patch, BPF_EMIT_CALL(ktime_get_mono_fast_ns));
+ }
+}So these look reasonable enough, but would be good to see some examples of kfunc implementations that don't just
BPF_CALLto a kernel function (with those helper wrappers we were discussing before).Quoted 4 lines
Let's maybe add them if/when needed as we add more metadata support?
xdp_metadata_export_to_skbhas an example, and rfc 1/2 have more examples, so it shouldn't be a problem to resurrect them back at some point?Quoted 4 lines
Well, the reason I asked for them is that I think having to maintain the BPF code generation in the drivers is probably the biggest drawback of the kfunc approach, so it would be good to be relatively sure that we can manage that complexity (via helpers) before we commit to this :)
Quoted 6 lines
Right, and I've added a bunch of examples in v2 rfc so we can judge whether that complexity is manageable or not :-)
Do you want me to add those wrappers you've back without any real users? Because I had to remove my veth tstamp accessors due to John/Jesper objections; I can maybe bring some of this back gated by somestatic_branchto avoid the fastpath cost?I missed the context a bit what did you mean "would be good to see some examples of kfunc implementations that don't just
BPF_CALLto a kernel function"? In this case do you mean BPF code directly without the call?Early on I thought we should just expose the
rx_descriptorwhich would be roughly the same right? (difference being code embedded in driver vs a lib) Trouble I ran into is driver code usingseqlock_tand mutexs which wasn't as straight forward as the simpler just read it from the descriptor. For example in mlx getting the ts would be easy from BPF with themlx4_cqestruct exposedu64
mlx4_en_get_cqe_ts(struct mlx4_cqe *cqe){ u64 hi, lo; struct mlx4_ts_cqe *ts_cqe = (struct mlx4_ts_cqe *)cqe; lo = (u64)be16_to_cpu(ts_cqe->timestamp_lo); hi = ((u64)be32_to_cpu(ts_cqe->timestamp_hi) + !lo) << 16; return hi | lo; }but converting that to nsec is a bit annoying,
void mlx4_en_fill_hwtstamps(struct
mlx4_en_dev*mdev,
structskb_shared_hwtstamps*hwts, u64 timestamp){ unsigned int seq; u64 nsec; do { seq = read_seqbegin(&mdev->clock_lock); nsec = timecounter_cyc2time(&mdev->clock, timestamp); } while (read_seqretry(&mdev->clock_lock, seq)); memset(hwts, 0, sizeof(struct skb_shared_hwtstamps)); hwts->hwtstamp = ns_to_ktime(nsec); }I think the nsec is what you really want.
Quoted 8 lines
With all the drivers doing slightly different ops we would have to create
read_seqbegin,read_seqretry,mutex_lock, ... to get at least the mlx and ice drivers it looks like we would need some more BPF primitives/helpers. Looks like some more work is needed on ice driver though to get rx tstamps on all packets.Anyways this convinced me real devices will probably use
BPF_CALLand not BPF insns directly.Some of the mlx5 path looks like this:
#define
REAL_TIME_TO_NS(hi, low)(((u64)hi) *NSEC_PER_SEC+ ((u64)low))static inline
ktime_tmlx5_real_time_cyc2time(structmlx5_clock*clock,
u64 timestamp)Quoted 7 lines
{ u64 time = REAL_TIME_TO_NS(timestamp >> 32, timestamp & 0xFFFFFFFF); return ns_to_ktime(time); }If some hints are harder to get, then just doing a kfunc call is better.
Sure, but if we end up having a full function call for every field in the metadata, that will end up having a significant performance impact on the XDP data path (thinking mostly about the skb metadata case here, which will collect several bits of metadata).
Quoted 1 line
csum may have a better chance to inline?
Yup, I agree. Including that also makes it possible to benchmark this series against Jesper's; which I think we should definitely be doing before merging this.
Quoted 7 lines
Quoted 4 lines
Good point I got sort of singularly focused on timestamp because I have a use case for it now.
Also hash is often sitting in the rx descriptor.
Ack, let me try to add something else (that's more inline-able) on the rx side for a v2.
If you go with in-kernel BPF kfunc approach (vs user space side) I think you also need to add CO-RE to be friendly for driver developers? Otherwise they have to keep that read in sync with the descriptors? Also need to handle versioning of descriptors where depending on specific options and firmware and chip being enabled the descriptor might be moving around. Of course can push this all to developer, but seems not so nice when we have the machinery to do this and we handle it for all other structures.
Quoted 4 lines
With CO-RE you can simply do the
rx_desc->hashandrx_desc->csumand expect CO-RE sorts it out based on currently runningbtf_idof the descriptor. If you go through normal path you get this for free of course.Quoted 6 lines
Doesn't look like the descriptors are as nice as you're trying to paint them (with clear hash/csum fields) :-) So not sure how much CO-RE would help.
At least looking at mlx4rx_csum, the driver consults three different sets of flags to figure out thehash_type. Or am I just unlucky with mlx4?
Quoted 4 lines
Which part are you talking about ?
hw_checksum = csum_unfold((__force __sum16)cqe->checksum);is trivial enough for bpf prog to do if it has access to 'cqe' pointer which is what John is proposing (I think).
I'm talking about mlx4_en_process_rx_cq, the caller of that check_csum. In particular: if (likely(dev->features & NETIF_F_RXCSUM)) branch I'm assuming we want to have hash_type available to the progs?
But also, check_csum handles other corner cases:
- short_frame: we simply force all those small frames to skip checksum complete
- get_fixed_ipv6_csum: In IPv6 packets, hw_checksum lacks 6 bytes from IPv6 header
- get_fixed_ipv4_csum: Although the stack expects checksum which doesn't include the pseudo header, the HW adds it
So it doesn't look like we can just unconditionally use cqe->checksum? The driver does a lot of massaging around that field to make it palatable.
Re: [xdp-hints] Re: [PATCH bpf-next 05/11] veth: Support rx timestamp metadata for xdp
Quoted 163 lines · Stanislav Fomichev
Quoted 151 lines · Alexei Starovoitov
Quoted 142 lines · Stanislav Fomichev
Quoted 135 lines · John Fastabend
Quoted 116 lines · Stanislav Fomichev
Quoted 114 lines · John Fastabend
Quoted 111 lines · Toke Høiland-Jørgensen
Quoted 91 lines · Martin KaFai Lau
Quoted 75 lines · John Fastabend
Quoted 26 lines
Quoted 21 lines
Quoted 16 lines
Quoted 15 lines
+static void veth_unroll_kfunc(const struct bpf_prog *prog, u32 func_id,
+ struct bpf_patch *patch)
+{
+ if (func_id == xdp_metadata_kfunc_id(XDP_METADATA_KFUNC_RX_TIMESTAMP_SUPPORTED)) {
+ /* return true; */
+ bpf_patch_append(patch, BPF_MOV64_IMM(BPF_REG_0, 1));
+ } else if (func_id == xdp_metadata_kfunc_id(XDP_METADATA_KFUNC_RX_TIMESTAMP)) {
+ /* return ktime_get_mono_fast_ns(); */
+ bpf_patch_append(patch, BPF_EMIT_CALL(ktime_get_mono_fast_ns));
+ }
+}So these look reasonable enough, but would be good to see some examples
of kfunc implementations that don't just BPF_CALL to a kernel function
(with those helper wrappers we were discussing before).Quoted 4 lines
Let's maybe add them if/when needed as we add more metadata support?
xdp_metadata_export_to_skbhas an example, and rfc 1/2 have more examples, so it shouldn't be a problem to resurrect them back at some point?Quoted 4 lines
Well, the reason I asked for them is that I think having to maintain the BPF code generation in the drivers is probably the biggest drawback of the kfunc approach, so it would be good to be relatively sure that we can manage that complexity (via helpers) before we commit to this :)
Quoted 6 lines
Right, and I've added a bunch of examples in v2 rfc so we can judge whether that complexity is manageable or not :-)
Do you want me to add those wrappers you've back without any real users? Because I had to remove my veth tstamp accessors due to John/Jesper objections; I can maybe bring some of this back gated by somestatic_branchto avoid the fastpath cost?I missed the context a bit what did you mean "would be good to see some examples of kfunc implementations that don't just
BPF_CALLto a kernel function"? In this case do you mean BPF code directly without the call?Early on I thought we should just expose the
rx_descriptorwhich would be roughly the same right? (difference being code embedded in driver vs a lib) Trouble I ran into is driver code usingseqlock_tand mutexs which wasn't as straight forward as the simpler just read it from the descriptor. For example in mlx getting the ts would be easy from BPF with themlx4_cqestruct exposedu64
mlx4_en_get_cqe_ts(struct mlx4_cqe *cqe){ u64 hi, lo; struct mlx4_ts_cqe *ts_cqe = (struct mlx4_ts_cqe *)cqe; lo = (u64)be16_to_cpu(ts_cqe->timestamp_lo); hi = ((u64)be32_to_cpu(ts_cqe->timestamp_hi) + !lo) << 16; return hi | lo; }but converting that to nsec is a bit annoying,
void mlx4_en_fill_hwtstamps(struct
mlx4_en_dev*mdev,
structskb_shared_hwtstamps*hwts, u64 timestamp){ unsigned int seq; u64 nsec; do { seq = read_seqbegin(&mdev->clock_lock); nsec = timecounter_cyc2time(&mdev->clock, timestamp); } while (read_seqretry(&mdev->clock_lock, seq)); memset(hwts, 0, sizeof(struct skb_shared_hwtstamps)); hwts->hwtstamp = ns_to_ktime(nsec); }I think the nsec is what you really want.
Quoted 8 lines
With all the drivers doing slightly different ops we would have to create
read_seqbegin,read_seqretry,mutex_lock, ... to get at least the mlx and ice drivers it looks like we would need some more BPF primitives/helpers. Looks like some more work is needed on ice driver though to get rx tstamps on all packets.Anyways this convinced me real devices will probably use
BPF_CALLand not BPF insns directly.Some of the mlx5 path looks like this:
#define
REAL_TIME_TO_NS(hi, low)(((u64)hi) *NSEC_PER_SEC+ ((u64)low))static inline
ktime_tmlx5_real_time_cyc2time(structmlx5_clock*clock,
u64 timestamp)Quoted 7 lines
{ u64 time = REAL_TIME_TO_NS(timestamp >> 32, timestamp & 0xFFFFFFFF); return ns_to_ktime(time); }If some hints are harder to get, then just doing a kfunc call is better.
Sure, but if we end up having a full function call for every field in the metadata, that will end up having a significant performance impact on the XDP data path (thinking mostly about the skb metadata case here, which will collect several bits of metadata).
Quoted 1 line
csum may have a better chance to inline?
Yup, I agree. Including that also makes it possible to benchmark this series against Jesper's; which I think we should definitely be doing before merging this.
Quoted 7 lines
Quoted 4 lines
Good point I got sort of singularly focused on timestamp because I have a use case for it now.
Also hash is often sitting in the rx descriptor.
Ack, let me try to add something else (that's more inline-able) on the rx side for a v2.
If you go with in-kernel BPF kfunc approach (vs user space side) I think you also need to add CO-RE to be friendly for driver developers? Otherwise they have to keep that read in sync with the descriptors? Also need to handle versioning of descriptors where depending on specific options and firmware and chip being enabled the descriptor might be moving around. Of course can push this all to developer, but seems not so nice when we have the machinery to do this and we handle it for all other structures.
Quoted 4 lines
With CO-RE you can simply do the
rx_desc->hashandrx_desc->csumand expect CO-RE sorts it out based on currently runningbtf_idof the descriptor. If you go through normal path you get this for free of course.Quoted 6 lines
Doesn't look like the descriptors are as nice as you're trying to paint them (with clear hash/csum fields) :-) So not sure how much CO-RE would help.
At least looking at mlx4rx_csum, the driver consults three different sets of flags to figure out thehash_type. Or am I just unlucky with mlx4?Quoted 4 lines
Which part are you talking about ?
hw_checksum = csum_unfold((__force __sum16)cqe->checksum);is trivial enough for bpf prog to do if it has access to 'cqe' pointer which is what John is proposing (I think).
I'm talking about
mlx4_en_process_rx_cq, the caller of thatcheck_csum. In particular: if (likely(dev->features & NETIF_F_RXCSUM)) branch I'm assuming we want to havehash_typeavailable to the progs?
Quoted 6 lines
But also,
check_csumhandles other corner cases:
-short_frame: we simply force all those small frames to skip checksum complete
-get_fixed_ipv6_csum: In IPv6 packets,hw_checksumlacks 6 bytes from IPv6 header
-get_fixed_ipv4_csum: Although the stack expects checksum which doesn't include the pseudo header, the HW adds it
Of course, but kfunc won't be doing them either.
We're talking XDP fast path.
The mlx4 hw is old and incapable.
No amount of sw can help.
Quoted 3 lines
So it doesn't look like we can just unconditionally use
cqe->checksum? The driver does a lot of massaging around that field to make it palatable.
Of course we can. cqe->checksum is still usable. the bpf prog would need to know what it's reading.
There should be no attempt to present a unified state of hw bits. That's what skb is for. XDP layer should not hide such hw details. Otherwise it will become a mini skb layer with all that overhead.
Re: [xdp-hints] Re: [PATCH bpf-next 05/11] veth: Support rx timestamp metadata for xdp
Quoted 181 lines · Alexei Starovoitov
Quoted 163 lines · Stanislav Fomichev
Quoted 151 lines · Alexei Starovoitov
Quoted 142 lines · Stanislav Fomichev
Quoted 135 lines · John Fastabend
Quoted 116 lines · Stanislav Fomichev
Quoted 114 lines · John Fastabend
Quoted 111 lines · Toke Høiland-Jørgensen
Quoted 91 lines · Martin KaFai Lau
Quoted 75 lines · John Fastabend
Quoted 26 lines
Quoted 21 lines
Quoted 20 lines
+static void veth_unroll_kfunc(const struct bpf_prog *prog, u32 func_id,
+ struct bpf_patch *patch)
+{
+ if (func_id == xdp_metadata_kfunc_id(XDP_METADATA_KFUNC_RX_TIMESTAMP_SUPPORTED)) {
+ /* return true; */
+ bpf_patch_append(patch, BPF_MOV64_IMM(BPF_REG_0, 1));
+ } else if (func_id == xdp_metadata_kfunc_id(XDP_METADATA_KFUNC_RX_TIMESTAMP)) {
+ /* return ktime_get_mono_fast_ns(); */
+ bpf_patch_append(patch, BPF_EMIT_CALL(ktime_get_mono_fast_ns));
+ }
+}So these look reasonable enough, but would be good to see some examples
of kfunc implementations that don't just BPF_CALL to a kernel function
(with those helper wrappers we were discussing before).Let's maybe add them if/when needed as we add more metadata support?
xdp_metadata_export_to_skb has an example, and rfc 1/2 have more
examples, so it shouldn't be a problem to resurrect them back at some
point?Quoted 4 lines
Well, the reason I asked for them is that I think having to maintain the BPF code generation in the drivers is probably the biggest drawback of the kfunc approach, so it would be good to be relatively sure that we can manage that complexity (via helpers) before we commit to this :)
Quoted 6 lines
Right, and I've added a bunch of examples in v2 rfc so we can judge whether that complexity is manageable or not :-)
Do you want me to add those wrappers you've back without any real users? Because I had to remove my veth tstamp accessors due to John/Jesper objections; I can maybe bring some of this back gated by somestatic_branchto avoid the fastpath cost?I missed the context a bit what did you mean "would be good to see some examples of kfunc implementations that don't just
BPF_CALLto a kernel function"? In this case do you mean BPF code directly without the call?Early on I thought we should just expose the
rx_descriptorwhich would be roughly the same right? (difference being code embedded in driver vs a lib) Trouble I ran into is driver code usingseqlock_tand mutexs which wasn't as straight forward as the simpler just read it from the descriptor. For example in mlx getting the ts would be easy from BPF with themlx4_cqestruct exposedu64
mlx4_en_get_cqe_ts(struct mlx4_cqe *cqe){ u64 hi, lo; struct mlx4_ts_cqe *ts_cqe = (struct mlx4_ts_cqe *)cqe; lo = (u64)be16_to_cpu(ts_cqe->timestamp_lo); hi = ((u64)be32_to_cpu(ts_cqe->timestamp_hi) + !lo) << 16; return hi | lo; }but converting that to nsec is a bit annoying,
void mlx4_en_fill_hwtstamps(struct
mlx4_en_dev*mdev,
structskb_shared_hwtstamps*hwts, u64 timestamp){ unsigned int seq; u64 nsec; do { seq = read_seqbegin(&mdev->clock_lock); nsec = timecounter_cyc2time(&mdev->clock, timestamp); } while (read_seqretry(&mdev->clock_lock, seq)); memset(hwts, 0, sizeof(struct skb_shared_hwtstamps)); hwts->hwtstamp = ns_to_ktime(nsec); }I think the nsec is what you really want.
Quoted 8 lines
With all the drivers doing slightly different ops we would have to create
read_seqbegin,read_seqretry,mutex_lock, ... to get at least the mlx and ice drivers it looks like we would need some more BPF primitives/helpers. Looks like some more work is needed on ice driver though to get rx tstamps on all packets.Anyways this convinced me real devices will probably use
BPF_CALLand not BPF insns directly.Some of the mlx5 path looks like this:
#define
REAL_TIME_TO_NS(hi, low)(((u64)hi) *NSEC_PER_SEC+ ((u64)low))static inline
ktime_tmlx5_real_time_cyc2time(structmlx5_clock*clock,
u64 timestamp)Quoted 7 lines
{ u64 time = REAL_TIME_TO_NS(timestamp >> 32, timestamp & 0xFFFFFFFF); return ns_to_ktime(time); }If some hints are harder to get, then just doing a kfunc call is better.
Sure, but if we end up having a full function call for every field in the metadata, that will end up having a significant performance impact on the XDP data path (thinking mostly about the skb metadata case here, which will collect several bits of metadata).
Quoted 1 line
csum may have a better chance to inline?
Yup, I agree. Including that also makes it possible to benchmark this series against Jesper's; which I think we should definitely be doing before merging this.
Quoted 7 lines
Quoted 4 lines
Good point I got sort of singularly focused on timestamp because I have a use case for it now.
Also hash is often sitting in the rx descriptor.
Ack, let me try to add something else (that's more inline-able) on the rx side for a v2.
If you go with in-kernel BPF kfunc approach (vs user space side) I think you also need to add CO-RE to be friendly for driver developers? Otherwise they have to keep that read in sync with the descriptors? Also need to handle versioning of descriptors where depending on specific options and firmware and chip being enabled the descriptor might be moving around. Of course can push this all to developer, but seems not so nice when we have the machinery to do this and we handle it for all other structures.
Quoted 4 lines
With CO-RE you can simply do the
rx_desc->hashandrx_desc->csumand expect CO-RE sorts it out based on currently runningbtf_idof the descriptor. If you go through normal path you get this for free of course.Quoted 6 lines
Doesn't look like the descriptors are as nice as you're trying to paint them (with clear hash/csum fields) :-) So not sure how much CO-RE would help.
At least looking at mlx4rx_csum, the driver consults three different sets of flags to figure out thehash_type. Or am I just unlucky with mlx4?Quoted 4 lines
Which part are you talking about ?
hw_checksum = csum_unfold((__force __sum16)cqe->checksum);is trivial enough for bpf prog to do if it has access to 'cqe' pointer which is what John is proposing (I think).
I'm talking about
mlx4_en_process_rx_cq, the caller of thatcheck_csum. In particular: if (likely(dev->features & NETIF_F_RXCSUM)) branch I'm assuming we want to havehash_typeavailable to the progs?Quoted 6 lines
But also,
check_csumhandles other corner cases:
-short_frame: we simply force all those small frames to skip checksum complete
-get_fixed_ipv6_csum: In IPv6 packets,hw_checksumlacks 6 bytes from IPv6 header
-get_fixed_ipv4_csum: Although the stack expects checksum which doesn't include the pseudo header, the HW adds itOf course, but kfunc won't be doing them either.
We're talking XDP fast path.
The mlx4 hw is old and incapable.
No amount of sw can help.Quoted 3 lines
So it doesn't look like we can just unconditionally use
cqe->checksum? The driver does a lot of massaging around that field to make it palatable.
Quoted 5 lines
Of course we can.
cqe->checksumis still usable. the bpf prog would need to know what it's reading.
There should be no attempt to present a unified state of hw bits. That's what skb is for. XDP layer should not hide such hw details. Otherwise it will become a mini skb layer with all that overhead.
I was hoping the kfunc could at least parse the flags and return some pkt_hash_types-like enum to indicate what this csum covers. So the users won't have to find the hardware manuals (not sure they are even available?) to decipher what numbers they've got. Regarding old mlx4: true, but mlx5's mlx5e_handle_csum doesn't look that much different :-(
But going back a bit: I'm probably missing what John has been suggesting. How is CO-RE relevant for kfuncs? kfuncs are already doing a CO-RE-like functionality by rewriting some "public api" (kfunc) into the bytecode to access the relevant data.
John Fastabend
maintainerRe: [xdp-hints] Re: [PATCH bpf-next 05/11] veth: Support rx timestamp metadata for xdp
Quoted 158 lines · Stanislav Fomichev
Quoted 156 lines · Alexei Starovoitov
Quoted 154 lines · Stanislav Fomichev
Quoted 151 lines · Alexei Starovoitov
Quoted 148 lines · Stanislav Fomichev
Quoted 135 lines · John Fastabend
Quoted 116 lines · Stanislav Fomichev
Quoted 114 lines · John Fastabend
Quoted 111 lines · Toke Høiland-Jørgensen
Quoted 91 lines · Martin KaFai Lau
Quoted 75 lines · John Fastabend
Quoted 26 lines
Quoted 25 lines
+static void veth_unroll_kfunc(const struct bpf_prog *prog, u32 func_id,
+ struct bpf_patch *patch)
+{
+ if (func_id == xdp_metadata_kfunc_id(XDP_METADATA_KFUNC_RX_TIMESTAMP_SUPPORTED)) {
+ /* return true; */
+ bpf_patch_append(patch, BPF_MOV64_IMM(BPF_REG_0, 1));
+ } else if (func_id == xdp_metadata_kfunc_id(XDP_METADATA_KFUNC_RX_TIMESTAMP)) {
+ /* return ktime_get_mono_fast_ns(); */
+ bpf_patch_append(patch, BPF_EMIT_CALL(ktime_get_mono_fast_ns));
+ }
+}So these look reasonable enough, but would be good to see some examples
of kfunc implementations that don't just BPF_CALL to a kernel function
(with those helper wrappers we were discussing before).Let's maybe add them if/when needed as we add more metadata support?
xdp_metadata_export_to_skb has an example, and rfc 1/2 have more
examples, so it shouldn't be a problem to resurrect them back at some
point?Well, the reason I asked for them is that I think having to maintain the
BPF code generation in the drivers is probably the biggest drawback of
the kfunc approach, so it would be good to be relatively sure that we
can manage that complexity (via helpers) before we commit to this :)Quoted 6 lines
Right, and I've added a bunch of examples in v2 rfc so we can judge whether that complexity is manageable or not :-)
Do you want me to add those wrappers you've back without any real users? Because I had to remove my veth tstamp accessors due to John/Jesper objections; I can maybe bring some of this back gated by somestatic_branchto avoid the fastpath cost?I missed the context a bit what did you mean "would be good to see some examples of kfunc implementations that don't just
BPF_CALLto a kernel function"? In this case do you mean BPF code directly without the call?Early on I thought we should just expose the
rx_descriptorwhich would be roughly the same right? (difference being code embedded in driver vs a lib) Trouble I ran into is driver code usingseqlock_tand mutexs which wasn't as straight forward as the simpler just read it from the descriptor. For example in mlx getting the ts would be easy from BPF with themlx4_cqestruct exposedu64
mlx4_en_get_cqe_ts(struct mlx4_cqe *cqe){ u64 hi, lo; struct mlx4_ts_cqe *ts_cqe = (struct mlx4_ts_cqe *)cqe; lo = (u64)be16_to_cpu(ts_cqe->timestamp_lo); hi = ((u64)be32_to_cpu(ts_cqe->timestamp_hi) + !lo) << 16; return hi | lo; }but converting that to nsec is a bit annoying,
void mlx4_en_fill_hwtstamps(struct
mlx4_en_dev*mdev,
structskb_shared_hwtstamps*hwts, u64 timestamp){ unsigned int seq; u64 nsec; do { seq = read_seqbegin(&mdev->clock_lock); nsec = timecounter_cyc2time(&mdev->clock, timestamp); } while (read_seqretry(&mdev->clock_lock, seq)); memset(hwts, 0, sizeof(struct skb_shared_hwtstamps)); hwts->hwtstamp = ns_to_ktime(nsec); }I think the nsec is what you really want.
Quoted 8 lines
With all the drivers doing slightly different ops we would have to create
read_seqbegin,read_seqretry,mutex_lock, ... to get at least the mlx and ice drivers it looks like we would need some more BPF primitives/helpers. Looks like some more work is needed on ice driver though to get rx tstamps on all packets.Anyways this convinced me real devices will probably use
BPF_CALLand not BPF insns directly.Some of the mlx5 path looks like this:
#define
REAL_TIME_TO_NS(hi, low)(((u64)hi) *NSEC_PER_SEC+ ((u64)low))static inline
ktime_tmlx5_real_time_cyc2time(structmlx5_clock*clock,
u64 timestamp)Quoted 7 lines
{ u64 time = REAL_TIME_TO_NS(timestamp >> 32, timestamp & 0xFFFFFFFF); return ns_to_ktime(time); }If some hints are harder to get, then just doing a kfunc call is better.
Sure, but if we end up having a full function call for every field in the metadata, that will end up having a significant performance impact on the XDP data path (thinking mostly about the skb metadata case here, which will collect several bits of metadata).
Quoted 1 line
csum may have a better chance to inline?
Yup, I agree. Including that also makes it possible to benchmark this series against Jesper's; which I think we should definitely be doing before merging this.
Quoted 7 lines
Quoted 4 lines
Good point I got sort of singularly focused on timestamp because I have a use case for it now.
Also hash is often sitting in the rx descriptor.
Ack, let me try to add something else (that's more inline-able) on the rx side for a v2.
If you go with in-kernel BPF kfunc approach (vs user space side) I think you also need to add CO-RE to be friendly for driver developers? Otherwise they have to keep that read in sync with the descriptors? Also need to handle versioning of descriptors where depending on specific options and firmware and chip being enabled the descriptor might be moving around. Of course can push this all to developer, but seems not so nice when we have the machinery to do this and we handle it for all other structures.
Quoted 4 lines
With CO-RE you can simply do the
rx_desc->hashandrx_desc->csumand expect CO-RE sorts it out based on currently runningbtf_idof the descriptor. If you go through normal path you get this for free of course.Doesn't look like the descriptors are as nice as you're trying to paint them (with clear hash/csum fields) :-) So not sure how much CO-RE would help.
At least looking at mlx4rx_csum, the driver consults three different sets of flags to figure out thehash_type. Or am I just unlucky with mlx4?
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Which part are you talking about ?
hw_checksum = csum_unfold((__force __sum16)cqe->checksum);is trivial enough for bpf prog to do if it has access to 'cqe' pointer which is what John is proposing (I think).
Yeah this is what I've been considering. If you just get the 'cqe' pointer walking the check_sum and rxhash should be straightforward.
There seems to be a real difference between timestamps and most other fields IMO. Timestamps require some extra logic to turn into ns when using the NIC hw clock. And the hw clock requires some coordination to keep in sync and stop from overflowing and may be done through other protocols like PTP in my use case. In some cases I think the clock is also shared amongst multiple phys. Seems mlx has a seqlock_t to protect it and I'm less sure about this but seems intel nic maybe has a sideband control channel.
Then there is everything else that I can think up that is per packet data and requires no coordination with the driver. Its just reading fields in the completion queue. This would be the csum, check_sum, vlan_header and so on. Sure we could kfunc each one of those things, but could also just write that directly in BPF and remove some abstractions and kernel dependency by doing it directly in the BPF program. If you like that abstraction seems to be the point of contention my opinion is the cost of kernel depency is high and I can abstract it with a user library anyways so burying it in the kernel only causes me support issues and backwards compat problems.
Hopefully, my position is more clear.
Quoted 12 lines
Quoted 12 lines
Quoted 11 lines
I'm talking about
mlx4_en_process_rx_cq, the caller of thatcheck_csum. In particular: if (likely(dev->features & NETIF_F_RXCSUM)) branch I'm assuming we want to havehash_typeavailable to the progs?But also,
check_csumhandles other corner cases:
-short_frame: we simply force all those small frames to skip checksum complete
-get_fixed_ipv6_csum: In IPv6 packets,hw_checksumlacks 6 bytes from IPv6 header
-get_fixed_ipv4_csum: Although the stack expects checksum which doesn't include the pseudo header, the HW adds it
Quoted 4 lines
Quoted 4 lines
Of course, but kfunc won't be doing them either.
We're talking XDP fast path.
The mlx4 hw is old and incapable.
No amount of sw can help.
Doesn't this lend itself to letting the XDP BPF program write the BPF code to read it out. Maybe someone cares about these details for some cpumap thing, but the rest of us wont care we might just want to read check_csum. Maybe we have an IPv6 only network or IPv4 network so can make further shortcuts. If a driver dev does this they will be forced to do the cactch all version because they have no way to know such details.
Quoted 11 lines
Quoted 10 lines
Quoted 4 lines
So it doesn't look like we can just unconditionally use
cqe->checksum? The driver does a lot of massaging around that field to make it palatable.Of course we can.
cqe->checksumis still usable. the bpf prog would need to know what it's reading.
There should be no attempt to present a unified state of hw bits. That's what skb is for. XDP layer should not hide such hw details. Otherwise it will become a mini skb layer with all that overhead.
Quoted 6 lines
I was hoping the kfunc could at least parse the flags and return some pkt_hash_types-like enum to indicate what this csum covers. So the users won't have to find the hardware manuals (not sure they are even available?) to decipher what numbers they've got. Regarding old mlx4: true, but mlx5's
mlx5e_handle_csumdoesn't look that much different :-(
The driver developers could still provide and ship the BPF libs with their drivers. I think if someone is going to use their NIC and lots of them and requires XDP it will get done. We could put them by the driver code mlx4.bpf or something.
Quoted 5 lines
But going back a bit: I'm probably missing what John has been suggesting. How is CO-RE relevant for kfuncs? kfuncs are already doing a CO-RE-like functionality by rewriting some "public api" (kfunc) into the bytecode to access the relevant data.
This was maybe a bit of an aside. What I was pondering a bit out loud perhaps is my recollection is there may be a few different descriptor layouts depending features enabled, exact device loaded and such. So in this case if I was a driver writer I might not want to hardcode the offset of the check_sum field. If I could use CO-RE then I don't have to care if in one version is the Nth field and later on someone makes it the Mth field just like any normal kernel struct. But through the kfunc interface I couldn't see how to get that. So instead of having a bunch of kfunc implementations you could just have one for all your device classes because you always name the field the same thing.
Re: [xdp-hints] Re: [PATCH bpf-next 05/11] veth: Support rx timestamp metadata for xdp
Quoted 188 lines · John Fastabend
Quoted 158 lines · Stanislav Fomichev
Quoted 156 lines · Alexei Starovoitov
Quoted 154 lines · Stanislav Fomichev
Quoted 151 lines · Alexei Starovoitov
Quoted 148 lines · Stanislav Fomichev
Quoted 135 lines · John Fastabend
Quoted 116 lines · Stanislav Fomichev
Quoted 114 lines · John Fastabend
Quoted 111 lines · Toke Høiland-Jørgensen
Quoted 91 lines · Martin KaFai Lau
Quoted 75 lines · John Fastabend
Quoted 32 lines
+static void veth_unroll_kfunc(const struct bpf_prog *prog, u32 func_id,
+ struct bpf_patch *patch)
+{
+ if (func_id == xdp_metadata_kfunc_id(XDP_METADATA_KFUNC_RX_TIMESTAMP_SUPPORTED)) {
+ /* return true; */
+ bpf_patch_append(patch, BPF_MOV64_IMM(BPF_REG_0, 1));
+ } else if (func_id == xdp_metadata_kfunc_id(XDP_METADATA_KFUNC_RX_TIMESTAMP)) {
+ /* return ktime_get_mono_fast_ns(); */
+ bpf_patch_append(patch, BPF_EMIT_CALL(ktime_get_mono_fast_ns));
+ }
+}So these look reasonable enough, but would be good to see some examples
of kfunc implementations that don't just BPF_CALL to a kernel function
(with those helper wrappers we were discussing before).Let's maybe add them if/when needed as we add more metadata support?
xdp_metadata_export_to_skb has an example, and rfc 1/2 have more
examples, so it shouldn't be a problem to resurrect them back at some
point?Well, the reason I asked for them is that I think having to maintain the
BPF code generation in the drivers is probably the biggest drawback of
the kfunc approach, so it would be good to be relatively sure that we
can manage that complexity (via helpers) before we commit to this :)Right, and I've added a bunch of examples in v2 rfc so we can judge
whether that complexity is manageable or not :-)
Do you want me to add those wrappers you've back without any real users?
Because I had to remove my veth tstamp accessors due to John/Jesper
objections; I can maybe bring some of this back gated by some
static_branch to avoid the fastpath cost?I missed the context a bit what did you mean "would be good to see some examples of kfunc implementations that don't just
BPF_CALLto a kernel function"? In this case do you mean BPF code directly without the call?Early on I thought we should just expose the
rx_descriptorwhich would be roughly the same right? (difference being code embedded in driver vs a lib) Trouble I ran into is driver code usingseqlock_tand mutexs which wasn't as straight forward as the simpler just read it from the descriptor. For example in mlx getting the ts would be easy from BPF with themlx4_cqestruct exposedu64
mlx4_en_get_cqe_ts(struct mlx4_cqe *cqe){ u64 hi, lo; struct mlx4_ts_cqe *ts_cqe = (struct mlx4_ts_cqe *)cqe; lo = (u64)be16_to_cpu(ts_cqe->timestamp_lo); hi = ((u64)be32_to_cpu(ts_cqe->timestamp_hi) + !lo) << 16; return hi | lo; }but converting that to nsec is a bit annoying,
void mlx4_en_fill_hwtstamps(struct
mlx4_en_dev*mdev,
structskb_shared_hwtstamps*hwts, u64 timestamp){ unsigned int seq; u64 nsec; do { seq = read_seqbegin(&mdev->clock_lock); nsec = timecounter_cyc2time(&mdev->clock, timestamp); } while (read_seqretry(&mdev->clock_lock, seq)); memset(hwts, 0, sizeof(struct skb_shared_hwtstamps)); hwts->hwtstamp = ns_to_ktime(nsec); }I think the nsec is what you really want.
Quoted 8 lines
With all the drivers doing slightly different ops we would have to create
read_seqbegin,read_seqretry,mutex_lock, ... to get at least the mlx and ice drivers it looks like we would need some more BPF primitives/helpers. Looks like some more work is needed on ice driver though to get rx tstamps on all packets.Anyways this convinced me real devices will probably use
BPF_CALLand not BPF insns directly.Some of the mlx5 path looks like this:
#define
REAL_TIME_TO_NS(hi, low)(((u64)hi) *NSEC_PER_SEC+ ((u64)low))static inline
ktime_tmlx5_real_time_cyc2time(structmlx5_clock*clock,
u64 timestamp)Quoted 7 lines
{ u64 time = REAL_TIME_TO_NS(timestamp >> 32, timestamp & 0xFFFFFFFF); return ns_to_ktime(time); }If some hints are harder to get, then just doing a kfunc call is better.
Sure, but if we end up having a full function call for every field in the metadata, that will end up having a significant performance impact on the XDP data path (thinking mostly about the skb metadata case here, which will collect several bits of metadata).
Quoted 1 line
csum may have a better chance to inline?
Yup, I agree. Including that also makes it possible to benchmark this series against Jesper's; which I think we should definitely be doing before merging this.
Quoted 7 lines
Quoted 4 lines
Good point I got sort of singularly focused on timestamp because I have a use case for it now.
Also hash is often sitting in the rx descriptor.
Ack, let me try to add something else (that's more inline-able) on the rx side for a v2.
If you go with in-kernel BPF kfunc approach (vs user space side) I think you also need to add CO-RE to be friendly for driver developers? Otherwise they have to keep that read in sync with the descriptors? Also need to handle versioning of descriptors where depending on specific options and firmware and chip being enabled the descriptor might be moving around. Of course can push this all to developer, but seems not so nice when we have the machinery to do this and we handle it for all other structures.
Quoted 4 lines
With CO-RE you can simply do the
rx_desc->hashandrx_desc->csumand expect CO-RE sorts it out based on currently runningbtf_idof the descriptor. If you go through normal path you get this for free of course.Doesn't look like the descriptors are as nice as you're trying to paint them (with clear hash/csum fields) :-) So not sure how much CO-RE would help.
At least looking at mlx4rx_csum, the driver consults three different sets of flags to figure out thehash_type. Or am I just unlucky with mlx4?Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Which part are you talking about ?
hw_checksum = csum_unfold((__force __sum16)cqe->checksum);is trivial enough for bpf prog to do if it has access to 'cqe' pointer which is what John is proposing (I think).
Yeah this is what I've been considering. If you just get the 'cqe' pointer walking the
check_sumand rxhash should be straightforward.There seems to be a real difference between timestamps and most other fields IMO. Timestamps require some extra logic to turn into ns when using the NIC hw clock. And the hw clock requires some coordination to keep in sync and stop from overflowing and may be done through other protocols like PTP in my use case. In some cases I think the clock is also shared amongst multiple phys. Seems mlx has a
seqlock_tto protect it and I'm less sure about this but seems intel nic maybe has a sideband control channel.Then there is everything else that I can think up that is per packet data and requires no coordination with the driver. Its just reading fields in the completion queue. This would be the csum,
check_sum,vlan_headerand so on. Sure we could kfunc each one of those things, but could also just write that directly in BPF and remove some abstractions and kernel dependency by doing it directly in the BPF program. If you like that abstraction seems to be the point of contention my opinion is the cost of kernel depency is high and I can abstract it with a user library anyways so burying it in the kernel only causes me support issues and backwards compat problems.
Quoted 1 line
Hopefully, my position is more clear.
Yeah, I see your point, I'm somewhat in the same position here wrt to legacy kernels :-)
Exposing raw descriptors seems fine, but imo it shouldn't be the goto mechanism for the metadata; but rather as a fallback whenever the driver implementation is missing/buggy. Unless, as you mention below, there are some libraries in the future to abstract that. But at least it seems that we agree that there needs to be some other non-raw-descriptor way to access spinlocked things like the timestamp?
Quoted 63 lines
Quoted 11 lines
Quoted 11 lines
Quoted 10 lines
I'm talking about
mlx4_en_process_rx_cq, the caller of thatcheck_csum. In particular: if (likely(dev->features & NETIF_F_RXCSUM)) branch I'm assuming we want to havehash_typeavailable to the progs?But also,
check_csumhandles other corner cases:
-short_frame: we simply force all those small frames to skip checksum complete
-get_fixed_ipv6_csum: In IPv6 packets,hw_checksumlacks 6 bytes from IPv6 header
-get_fixed_ipv4_csum: Although the stack expects checksum which doesn't include the pseudo header, the HW adds itQuoted 4 lines
Quoted 4 lines
Of course, but kfunc won't be doing them either.
We're talking XDP fast path.
The mlx4 hw is old and incapable.
No amount of sw can help.Doesn't this lend itself to letting the XDP BPF program write the BPF code to read it out. Maybe someone cares about these details for some cpumap thing, but the rest of us wont care we might just want to read
check_csum. Maybe we have an IPv6 only network or IPv4 network so can make further shortcuts. If a driver dev does this they will be forced to do the cactch all version because they have no way to know such details.Quoted 10 lines
Quoted 9 lines
Quoted 3 lines
So it doesn't look like we can just unconditionally use
cqe->checksum? The driver does a lot of massaging around that field to make it palatable.Of course we can.
cqe->checksumis still usable. the bpf prog would need to know what it's reading.
There should be no attempt to present a unified state of hw bits. That's what skb is for. XDP layer should not hide such hw details. Otherwise it will become a mini skb layer with all that overhead.Quoted 6 lines
I was hoping the kfunc could at least parse the flags and return some pkt_hash_types-like enum to indicate what this csum covers. So the users won't have to find the hardware manuals (not sure they are even available?) to decipher what numbers they've got. Regarding old mlx4: true, but mlx5's
mlx5e_handle_csumdoesn't look that much different :-(The driver developers could still provide and ship the BPF libs with their drivers. I think if someone is going to use their NIC and lots of them and requires XDP it will get done. We could put them by the driver code mlx4.bpf or something.
Quoted 5 lines
But going back a bit: I'm probably missing what John has been suggesting. How is CO-RE relevant for kfuncs? kfuncs are already doing a CO-RE-like functionality by rewriting some "public api" (kfunc) into the bytecode to access the relevant data.
This was maybe a bit of an aside. What I was pondering a bit out loud perhaps is my recollection is there may be a few different descriptor layouts depending features enabled, exact device loaded and such. So in this case if I was a driver writer I might not want to hardcode the offset of the
check_sumfield. If I could use CO-RE then I don't have to care if in one version is the Nth field and later on someone makes it the Mth field just like any normal kernel struct. But through the kfunc interface I couldn't see how to get that. So instead of having a bunch of kfunc implementations you could just have one for all your device classes because you always name the field the same thing.
John Fastabend
maintainerRe: [xdp-hints] Re: [PATCH bpf-next 05/11] veth: Support rx timestamp metadata for xdp
Quoted 192 lines · Stanislav Fomichev
Quoted 188 lines · John Fastabend
Quoted 158 lines · Stanislav Fomichev
Quoted 156 lines · Alexei Starovoitov
Quoted 154 lines · Stanislav Fomichev
Quoted 151 lines · Alexei Starovoitov
Quoted 148 lines · Stanislav Fomichev
Quoted 135 lines · John Fastabend
Quoted 116 lines · Stanislav Fomichev
Quoted 114 lines · John Fastabend
Quoted 111 lines · Toke Høiland-Jørgensen
Quoted 91 lines · Martin KaFai Lau
Quoted 83 lines · John Fastabend
+static void veth_unroll_kfunc(const struct bpf_prog *prog, u32 func_id,
+ struct bpf_patch *patch)
+{
+ if (func_id == xdp_metadata_kfunc_id(XDP_METADATA_KFUNC_RX_TIMESTAMP_SUPPORTED)) {
+ /* return true; */
+ bpf_patch_append(patch, BPF_MOV64_IMM(BPF_REG_0, 1));
+ } else if (func_id == xdp_metadata_kfunc_id(XDP_METADATA_KFUNC_RX_TIMESTAMP)) {
+ /* return ktime_get_mono_fast_ns(); */
+ bpf_patch_append(patch, BPF_EMIT_CALL(ktime_get_mono_fast_ns));
+ }
+}So these look reasonable enough, but would be good to see some examples
of kfunc implementations that don't just BPF_CALL to a kernel function
(with those helper wrappers we were discussing before).Let's maybe add them if/when needed as we add more metadata support?
xdp_metadata_export_to_skb has an example, and rfc 1/2 have more
examples, so it shouldn't be a problem to resurrect them back at some
point?Well, the reason I asked for them is that I think having to maintain the
BPF code generation in the drivers is probably the biggest drawback of
the kfunc approach, so it would be good to be relatively sure that we
can manage that complexity (via helpers) before we commit to this :)Right, and I've added a bunch of examples in v2 rfc so we can judge
whether that complexity is manageable or not :-)
Do you want me to add those wrappers you've back without any real users?
Because I had to remove my veth tstamp accessors due to John/Jesper
objections; I can maybe bring some of this back gated by some
static_branch to avoid the fastpath cost?I missed the context a bit what did you mean "would be good to see some
examples of kfunc implementations that don't just BPF_CALL to a kernel
function"? In this case do you mean BPF code directly without the call?Early on I thought we should just expose the rx_descriptor which would
be roughly the same right? (difference being code embedded in driver vs
a lib) Trouble I ran into is driver code using seqlock_t and mutexs
which wasn't as straight forward as the simpler just read it from
the descriptor. For example in mlx getting the ts would be easy from
BPF with the mlx4_cqe struct exposedu64 mlx4_en_get_cqe_ts(struct mlx4_cqe *cqe)
{
u64 hi, lo;
struct mlx4_ts_cqe *ts_cqe = (struct mlx4_ts_cqe *)cqe;lo = (u64)be16_to_cpu(ts_cqe->timestamp_lo);
hi = ((u64)be32_to_cpu(ts_cqe->timestamp_hi) + !lo) << 16;return hi | lo;
}but converting that to nsec is a bit annoying,
void mlx4_en_fill_hwtstamps(struct mlx4_en_dev *mdev,
struct skb_shared_hwtstamps *hwts,
u64 timestamp)
{
unsigned int seq;
u64 nsec;do {
seq = read_seqbegin(&mdev->clock_lock);
nsec = timecounter_cyc2time(&mdev->clock, timestamp);
} while (read_seqretry(&mdev->clock_lock, seq));memset(hwts, 0, sizeof(struct skb_shared_hwtstamps));
hwts->hwtstamp = ns_to_ktime(nsec);
}I think the nsec is what you really want.
With all the drivers doing slightly different ops we would have
to create read_seqbegin, read_seqretry, mutex_lock, ... to get
at least the mlx and ice drivers it looks like we would need some
more BPF primitives/helpers. Looks like some more work is needed
on ice driver though to get rx tstamps on all packets.Anyways this convinced me real devices will probably use BPF_CALL
and not BPF insns directly.Some of the mlx5 path looks like this:
#define
REAL_TIME_TO_NS(hi, low)(((u64)hi) *NSEC_PER_SEC+ ((u64)low))static inline
ktime_tmlx5_real_time_cyc2time(structmlx5_clock*clock,
u64 timestamp)Quoted 7 lines
{ u64 time = REAL_TIME_TO_NS(timestamp >> 32, timestamp & 0xFFFFFFFF); return ns_to_ktime(time); }If some hints are harder to get, then just doing a kfunc call is better.
Sure, but if we end up having a full function call for every field in the metadata, that will end up having a significant performance impact on the XDP data path (thinking mostly about the skb metadata case here, which will collect several bits of metadata).
Quoted 1 line
csum may have a better chance to inline?
Yup, I agree. Including that also makes it possible to benchmark this series against Jesper's; which I think we should definitely be doing before merging this.
Quoted 7 lines
Quoted 4 lines
Good point I got sort of singularly focused on timestamp because I have a use case for it now.
Also hash is often sitting in the rx descriptor.
Ack, let me try to add something else (that's more inline-able) on the rx side for a v2.
If you go with in-kernel BPF kfunc approach (vs user space side) I think you also need to add CO-RE to be friendly for driver developers? Otherwise they have to keep that read in sync with the descriptors? Also need to handle versioning of descriptors where depending on specific options and firmware and chip being enabled the descriptor might be moving around. Of course can push this all to developer, but seems not so nice when we have the machinery to do this and we handle it for all other structures.
Quoted 4 lines
With CO-RE you can simply do the
rx_desc->hashandrx_desc->csumand expect CO-RE sorts it out based on currently runningbtf_idof the descriptor. If you go through normal path you get this for free of course.Doesn't look like the descriptors are as nice as you're trying to paint them (with clear hash/csum fields) :-) So not sure how much CO-RE would help.
At least looking at mlx4rx_csum, the driver consults three different sets of flags to figure out thehash_type. Or am I just unlucky with mlx4?Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Which part are you talking about ?
hw_checksum = csum_unfold((__force __sum16)cqe->checksum);is trivial enough for bpf prog to do if it has access to 'cqe' pointer which is what John is proposing (I think).
Yeah this is what I've been considering. If you just get the 'cqe' pointer walking the
check_sumand rxhash should be straightforward.There seems to be a real difference between timestamps and most other fields IMO. Timestamps require some extra logic to turn into ns when using the NIC hw clock. And the hw clock requires some coordination to keep in sync and stop from overflowing and may be done through other protocols like PTP in my use case. In some cases I think the clock is also shared amongst multiple phys. Seems mlx has a
seqlock_tto protect it and I'm less sure about this but seems intel nic maybe has a sideband control channel.Then there is everything else that I can think up that is per packet data and requires no coordination with the driver. Its just reading fields in the completion queue. This would be the csum,
check_sum,vlan_headerand so on. Sure we could kfunc each one of those things, but could also just write that directly in BPF and remove some abstractions and kernel dependency by doing it directly in the BPF program. If you like that abstraction seems to be the point of contention my opinion is the cost of kernel depency is high and I can abstract it with a user library anyways so burying it in the kernel only causes me support issues and backwards compat problems.Quoted 1 line
Hopefully, my position is more clear.
Quoted 9 lines
Yeah, I see your point, I'm somewhat in the same position here wrt to legacy kernels :-)
Exposing raw descriptors seems fine, but imo it shouldn't be the goto mechanism for the metadata; but rather as a fallback whenever the driver implementation is missing/buggy. Unless, as you mention below, there are some libraries in the future to abstract that. But at least it seems that we agree that there needs to be some other non-raw-descriptor way to access spinlocked things like the timestamp?
Yeah for timestamps I think a kfunc to either get the timestamp or could also be done with a kfunc to read hw clock. But either way seems hard to do that in BPF code directly so kfunc feels right to me here.
By the way I think if you have the completion queue (rx descriptor) in the xdp_buff and we use Yonghong's patch to cast the ctx as a BTF type then we should be able to also directly read all the fields. I see you noted this in the response to Alexei so lets see what he thinks.
Re: [xdp-hints] Re: [PATCH bpf-next 05/11] veth: Support rx timestamp metadata for xdp
Quoted 9 lines · John Fastabend
Yeah for timestamps I think a kfunc to either get the timestamp or could also be done with a kfunc to read hw clock. But either way seems hard to do that in BPF code directly so kfunc feels right to me here.
By the way I think if you have the completion queue (rx descriptor) in the
xdp_buffand we use Yonghong's patch to cast the ctx as a BTF type then we should be able to also directly read all the fields. I see you noted this in the response to Alexei so lets see what he thinks.
Fine with me.
Let's land something that is not uapi and then iterate on top.
Re: [xdp-hints] Re: [PATCH bpf-next 05/11] veth: Support rx timestamp metadata for xdp
In reply to Stanislav FomichevQuoted 7 lines · Stanislav Fomichev
Quoted 7 lines
Quoted 6 lines
Doesn't look like the descriptors are as nice as you're trying to paint them (with clear hash/csum fields) :-) So not sure how much CO-RE would help.
At least looking at mlx4rx_csum, the driver consults three different sets of flags to figure out thehash_type. Or am I just unlucky with mlx4?
Quoted 8 lines
Quoted 4 lines
Which part are you talking about ?
hw_checksum = csum_unfold((__force __sum16)cqe->checksum);is trivial enough for bpf prog to do if it has access to 'cqe' pointer which is what John is proposing (I think).
I'm talking about
mlx4_en_process_rx_cq, the caller of thatcheck_csum. In particular: if (likely(dev->features & NETIF_F_RXCSUM)) branch I'm assuming we want to havehash_typeavailable to the progs?
I agree we should expose the hash_type, but that doesn't actually look to be that complicated, see below.
Quoted 10 lines
But also,
check_csumhandles other corner cases:
-short_frame: we simply force all those small frames to skip checksum complete
-get_fixed_ipv6_csum: In IPv6 packets,hw_checksumlacks 6 bytes from IPv6 header
-get_fixed_ipv4_csum: Although the stack expects checksum which doesn't include the pseudo header, the HW adds itSo it doesn't look like we can just unconditionally use
cqe->checksum? The driver does a lot of massaging around that field to make it palatable.
Poking around a bit in the other drivers, AFAICT it's only a subset of drivers that support CSUM_COMPLETE at all; for instance, the Intel drivers just set CHECKSUM_UNNECESSARY for TCP/UDP/SCTP. I think the CHECKSUM_UNNECESSARY is actually the most important bit we'd want to propagate?
AFAICT, the drivers actually implementing CHECKSUM_COMPLETE need access to other data structures than the rx descriptor to determine the status of the checksum (mlx4 looks at priv->flags, mlx5 checks rq->state), so just exposing the rx descriptor to BPF as John is suggesting does not actually give the XDP program enough information to act on the checksum field on its own. We could still have a separate kfunc to just expose the hw checksum value (see below), but I think it probably needs to be paired with other kfuncs to be useful.
Looking at the mlx4 code, I think the following mapping to kfuncs (in pseudo-C) would give the flexibility for XDP to access all the bits it needs, while inlining everything except getting the full checksum for non-TCP/UDP traffic. An (admittedly cursory) glance at some of the other drivers (mlx5, ice, i40e) indicates that this would work for those drivers as well.
bpf_xdp_metadata_rx_hash_supported() {
return dev->features & NETIF_F_RXHASH;
}
bpf_xdp_metadata_rx_hash() {
return be32_to_cpu(cqe->immed_rss_invalid);
}
bpf_xdp_metdata_rx_hash_type() {
if (likely(dev->features & NETIF_F_RXCSUM) &&
(cqe->status & cpu_to_be16(MLX4_CQE_STATUS_TCP | MLX4_CQE_STATUS_UDP)) &&
(cqe->status & cpu_to_be16(MLX4_CQE_STATUS_IPOK)) &&
cqe->checksum == cpu_to_be16(0xffff))
return PKT_HASH_TYPE_L4; return PKT_HASH_TYPE_L3;
}
bpf_xdp_metadata_rx_csum_supported() {
return dev->features & NETIF_F_RXCSUM;
}
bpf_xdp_metadata_rx_csum_level() {
if ((cqe->status & cpu_to_be16(MLX4_CQE_STATUS_TCP |
MLX4_CQE_STATUS_UDP)) &&
(cqe->status & cpu_to_be16(MLX4_CQE_STATUS_IPOK)) &&
cqe->checksum == cpu_to_be16(0xffff))
return CHECKSUM_UNNECESSARY;
if (!(priv->flags & MLX4_EN_FLAG_RX_CSUM_NON_TCP_UDP &&
(cqe->status & cpu_to_be16(MLX4_CQE_STATUS_IP_ANY))) &&
!short_frame(len))
return CHECKSUM_COMPLETE; /* we could also omit this case entirely */
return CHECKSUM_NONE;
}/* this one could be called by the metadata_to_skb code */ bpf_xdp_metadata_rx_csum_full() {
return check_csum() /* BPF_CALL this after refactoring so it is skb-agnostic */
}
/* this one would be for people like John who want to re-implement
* check_csum() themselves */bpf_xdp_metdata_rx_csum_raw() {
return cqe->checksum;
}
-Toke
Re: [xdp-hints] Re: [PATCH bpf-next 05/11] veth: Support rx timestamp metadata for xdp
Quoted 98 lines · Toke Høiland-Jørgensen
Quoted 7 lines · Stanislav Fomichev
Quoted 7 lines
Quoted 6 lines
Doesn't look like the descriptors are as nice as you're trying to paint them (with clear hash/csum fields) :-) So not sure how much CO-RE would help.
At least looking at mlx4rx_csum, the driver consults three different sets of flags to figure out thehash_type. Or am I just unlucky with mlx4?Quoted 8 lines
Quoted 4 lines
Which part are you talking about ?
hw_checksum = csum_unfold((__force __sum16)cqe->checksum);is trivial enough for bpf prog to do if it has access to 'cqe' pointer which is what John is proposing (I think).
I'm talking about
mlx4_en_process_rx_cq, the caller of thatcheck_csum. In particular: if (likely(dev->features & NETIF_F_RXCSUM)) branch I'm assuming we want to havehash_typeavailable to the progs?I agree we should expose the
hash_type, but that doesn't actually look to be that complicated, see below.Quoted 10 lines
But also,
check_csumhandles other corner cases:
-short_frame: we simply force all those small frames to skip checksum complete
-get_fixed_ipv6_csum: In IPv6 packets,hw_checksumlacks 6 bytes from IPv6 header
-get_fixed_ipv4_csum: Although the stack expects checksum which doesn't include the pseudo header, the HW adds itSo it doesn't look like we can just unconditionally use
cqe->checksum? The driver does a lot of massaging around that field to make it palatable.Poking around a bit in the other drivers, AFAICT it's only a subset of drivers that support
CSUM_COMPLETEat all; for instance, the Intel drivers just setCHECKSUM_UNNECESSARYfor TCP/UDP/SCTP. I think theCHECKSUM_UNNECESSARYis actually the most important bit we'd want to propagate?AFAICT, the drivers actually implementing
CHECKSUM_COMPLETEneed access to other data structures than the rx descriptor to determine the status of the checksum (mlx4 looks atpriv->flags, mlx5 checksrq->state), so just exposing the rx descriptor to BPF as John is suggesting does not actually give the XDP program enough information to act on the checksum field on its own. We could still have a separate kfunc to just expose the hw checksum value (see below), but I think it probably needs to be paired with other kfuncs to be useful.Looking at the mlx4 code, I think the following mapping to kfuncs (in pseudo-C) would give the flexibility for XDP to access all the bits it needs, while inlining everything except getting the full checksum for non-TCP/UDP traffic. An (admittedly cursory) glance at some of the other drivers (mlx5, ice, i40e) indicates that this would work for those drivers as well.
bpf_xdp_metadata_rx_hash_supported(){
returndev->features&NETIF_F_RXHASH;
}
bpf_xdp_metadata_rx_hash(){
returnbe32_to_cpu(cqe->immed_rss_invalid);
}
bpf_xdp_metdata_rx_hash_type(){
if (likely(dev->features & NETIF_F_RXCSUM)&&(cqe->status & cpu_to_be16(MLX4_CQE_STATUS_TCP | MLX4_CQE_STATUS_UDP)) && (cqe->status & cpu_to_be16(MLX4_CQE_STATUS_IPOK)) && cqe->checksum == cpu_to_be16(0xffff)) return PKT_HASH_TYPE_L4;return PKT_HASH_TYPE_L3; }
bpf_xdp_metadata_rx_csum_supported(){
returndev->features&NETIF_F_RXCSUM;
}bpf_xdp_metadata_rx_csum_level() { if ((cqe->status & cpu_to_be16(MLX4_CQE_STATUS_TCP | MLX4_CQE_STATUS_UDP)) && (cqe->status & cpu_to_be16(MLX4_CQE_STATUS_IPOK)) && cqe->checksum == cpu_to_be16(0xffff)) return CHECKSUM_UNNECESSARY; if (!(priv->flags & MLX4_EN_FLAG_RX_CSUM_NON_TCP_UDP && (cqe->status & cpu_to_be16(MLX4_CQE_STATUS_IP_ANY))) && !short_frame(len)) return CHECKSUM_COMPLETE; /* we could also omit this case entirely */ return CHECKSUM_NONE; }/* this one could be called by the
metadata_to_skbcode */bpf_xdp_metadata_rx_csum_full(){
returncheck_csum()/*BPF_CALLthis after refactoring so it is skb-agnostic */
}
Quoted 5 lines
/* this one would be for people like John who want to re-implement
*check_csum()themselves */bpf_xdp_metdata_rx_csum_raw(){
returncqe->checksum;
}
Are you proposing a bunch of per-driver kfuncs that bpf prog will call. If so that works, but bpf prog needs to pass dev and cqe pointers into these kfuncs, so they need to be exposed to the prog somehow. Probably through xdp_md ?
This way we can have both: bpf prog reading cqe fields directly and using kfuncs to access things.
Inlining of kfuncs should be done generically.
It's not a driver job to convert native asm into bpf asm.
Re: [xdp-hints] Re: [PATCH bpf-next 05/11] veth: Support rx timestamp metadata for xdp
Quoted 106 lines · Alexei Starovoitov
Quoted 98 lines · Toke Høiland-Jørgensen
Quoted 7 lines · Stanislav Fomichev
Quoted 7 lines
Quoted 6 lines
Doesn't look like the descriptors are as nice as you're trying to paint them (with clear hash/csum fields) :-) So not sure how much CO-RE would help.
At least looking at mlx4rx_csum, the driver consults three different sets of flags to figure out thehash_type. Or am I just unlucky with mlx4?Quoted 8 lines
Quoted 4 lines
Which part are you talking about ?
hw_checksum = csum_unfold((__force __sum16)cqe->checksum);is trivial enough for bpf prog to do if it has access to 'cqe' pointer which is what John is proposing (I think).
I'm talking about
mlx4_en_process_rx_cq, the caller of thatcheck_csum. In particular: if (likely(dev->features & NETIF_F_RXCSUM)) branch I'm assuming we want to havehash_typeavailable to the progs?I agree we should expose the
hash_type, but that doesn't actually look to be that complicated, see below.Quoted 10 lines
But also,
check_csumhandles other corner cases:
-short_frame: we simply force all those small frames to skip checksum complete
-get_fixed_ipv6_csum: In IPv6 packets,hw_checksumlacks 6 bytes from IPv6 header
-get_fixed_ipv4_csum: Although the stack expects checksum which doesn't include the pseudo header, the HW adds itSo it doesn't look like we can just unconditionally use
cqe->checksum? The driver does a lot of massaging around that field to make it palatable.Poking around a bit in the other drivers, AFAICT it's only a subset of drivers that support
CSUM_COMPLETEat all; for instance, the Intel drivers just setCHECKSUM_UNNECESSARYfor TCP/UDP/SCTP. I think theCHECKSUM_UNNECESSARYis actually the most important bit we'd want to propagate?AFAICT, the drivers actually implementing
CHECKSUM_COMPLETEneed access to other data structures than the rx descriptor to determine the status of the checksum (mlx4 looks atpriv->flags, mlx5 checksrq->state), so just exposing the rx descriptor to BPF as John is suggesting does not actually give the XDP program enough information to act on the checksum field on its own. We could still have a separate kfunc to just expose the hw checksum value (see below), but I think it probably needs to be paired with other kfuncs to be useful.Looking at the mlx4 code, I think the following mapping to kfuncs (in pseudo-C) would give the flexibility for XDP to access all the bits it needs, while inlining everything except getting the full checksum for non-TCP/UDP traffic. An (admittedly cursory) glance at some of the other drivers (mlx5, ice, i40e) indicates that this would work for those drivers as well.
bpf_xdp_metadata_rx_hash_supported(){
returndev->features&NETIF_F_RXHASH;
}
bpf_xdp_metadata_rx_hash(){
returnbe32_to_cpu(cqe->immed_rss_invalid);
}
bpf_xdp_metdata_rx_hash_type(){
if (likely(dev->features & NETIF_F_RXCSUM)&&(cqe->status & cpu_to_be16(MLX4_CQE_STATUS_TCP | MLX4_CQE_STATUS_UDP)) && (cqe->status & cpu_to_be16(MLX4_CQE_STATUS_IPOK)) && cqe->checksum == cpu_to_be16(0xffff)) return PKT_HASH_TYPE_L4;return PKT_HASH_TYPE_L3; }
bpf_xdp_metadata_rx_csum_supported(){
returndev->features&NETIF_F_RXCSUM;
}bpf_xdp_metadata_rx_csum_level() { if ((cqe->status & cpu_to_be16(MLX4_CQE_STATUS_TCP | MLX4_CQE_STATUS_UDP)) && (cqe->status & cpu_to_be16(MLX4_CQE_STATUS_IPOK)) && cqe->checksum == cpu_to_be16(0xffff)) return CHECKSUM_UNNECESSARY; if (!(priv->flags & MLX4_EN_FLAG_RX_CSUM_NON_TCP_UDP && (cqe->status & cpu_to_be16(MLX4_CQE_STATUS_IP_ANY))) && !short_frame(len)) return CHECKSUM_COMPLETE; /* we could also omit this case entirely */ return CHECKSUM_NONE; }/* this one could be called by the
metadata_to_skbcode */bpf_xdp_metadata_rx_csum_full(){
returncheck_csum()/*BPF_CALLthis after refactoring so it is skb-agnostic */
}Quoted 5 lines
/* this one would be for people like John who want to re-implement
*check_csum()themselves */bpf_xdp_metdata_rx_csum_raw(){
returncqe->checksum;
}
Quoted 4 lines
Are you proposing a bunch of per-driver kfuncs that bpf prog will call. If so that works, but bpf prog needs to pass dev and cqe pointers into these kfuncs, so they need to be exposed to the prog somehow. Probably through
xdp_md?
So far I'm doing:
struct mlx4_xdp_buff {
struct xdp_buff xdp;
struct mlx4_cqe *cqe;
struct mlx4_en_dev *mdev;
}
And then the kfuncs get ctx (aka xdp_buff) as a sole argument and can find cqe/mdev via container_of.
If we really need these to be exposed to the program, can we use Yonghong's approach from [0]?
0: https://lore.kernel.org/bpf/[email protected]/
Quoted 4 lines
This way we can have both: bpf prog reading cqe fields directly and using kfuncs to access things.
Inlining of kfuncs should be done generically.
It's not a driver job to convert native asm into bpf asm.
Ack. I can replace the unrolling with something that just resolves "generic" kfuncs to the per-driver implementation maybe? That would at least avoid netdev->ndo_kfunc_xxx indirect calls at runtime..
Re: [xdp-hints] Re: [PATCH bpf-next 05/11] veth: Support rx timestamp metadata for xdp
Quoted 108 lines · Stanislav Fomichev
Quoted 106 lines · Alexei Starovoitov
Quoted 103 lines · Toke Høiland-Jørgensen
Quoted 7 lines · Stanislav Fomichev
Quoted 7 lines
Quoted 6 lines
Doesn't look like the descriptors are as nice as you're trying to paint them (with clear hash/csum fields) :-) So not sure how much CO-RE would help.
At least looking at mlx4rx_csum, the driver consults three different sets of flags to figure out thehash_type. Or am I just unlucky with mlx4?Quoted 8 lines
Quoted 4 lines
Which part are you talking about ?
hw_checksum = csum_unfold((__force __sum16)cqe->checksum);is trivial enough for bpf prog to do if it has access to 'cqe' pointer which is what John is proposing (I think).
I'm talking about
mlx4_en_process_rx_cq, the caller of thatcheck_csum. In particular: if (likely(dev->features & NETIF_F_RXCSUM)) branch I'm assuming we want to havehash_typeavailable to the progs?I agree we should expose the
hash_type, but that doesn't actually look to be that complicated, see below.Quoted 10 lines
But also,
check_csumhandles other corner cases:
-short_frame: we simply force all those small frames to skip checksum complete
-get_fixed_ipv6_csum: In IPv6 packets,hw_checksumlacks 6 bytes from IPv6 header
-get_fixed_ipv4_csum: Although the stack expects checksum which doesn't include the pseudo header, the HW adds itSo it doesn't look like we can just unconditionally use
cqe->checksum? The driver does a lot of massaging around that field to make it palatable.Poking around a bit in the other drivers, AFAICT it's only a subset of drivers that support
CSUM_COMPLETEat all; for instance, the Intel drivers just setCHECKSUM_UNNECESSARYfor TCP/UDP/SCTP. I think theCHECKSUM_UNNECESSARYis actually the most important bit we'd want to propagate?AFAICT, the drivers actually implementing
CHECKSUM_COMPLETEneed access to other data structures than the rx descriptor to determine the status of the checksum (mlx4 looks atpriv->flags, mlx5 checksrq->state), so just exposing the rx descriptor to BPF as John is suggesting does not actually give the XDP program enough information to act on the checksum field on its own. We could still have a separate kfunc to just expose the hw checksum value (see below), but I think it probably needs to be paired with other kfuncs to be useful.Looking at the mlx4 code, I think the following mapping to kfuncs (in pseudo-C) would give the flexibility for XDP to access all the bits it needs, while inlining everything except getting the full checksum for non-TCP/UDP traffic. An (admittedly cursory) glance at some of the other drivers (mlx5, ice, i40e) indicates that this would work for those drivers as well.
bpf_xdp_metadata_rx_hash_supported(){
returndev->features&NETIF_F_RXHASH;
}
bpf_xdp_metadata_rx_hash(){
returnbe32_to_cpu(cqe->immed_rss_invalid);
}
bpf_xdp_metdata_rx_hash_type(){
if (likely(dev->features & NETIF_F_RXCSUM)&&(cqe->status & cpu_to_be16(MLX4_CQE_STATUS_TCP | MLX4_CQE_STATUS_UDP)) && (cqe->status & cpu_to_be16(MLX4_CQE_STATUS_IPOK)) && cqe->checksum == cpu_to_be16(0xffff)) return PKT_HASH_TYPE_L4;return PKT_HASH_TYPE_L3; }
bpf_xdp_metadata_rx_csum_supported(){
returndev->features&NETIF_F_RXCSUM;
}bpf_xdp_metadata_rx_csum_level() { if ((cqe->status & cpu_to_be16(MLX4_CQE_STATUS_TCP | MLX4_CQE_STATUS_UDP)) && (cqe->status & cpu_to_be16(MLX4_CQE_STATUS_IPOK)) && cqe->checksum == cpu_to_be16(0xffff)) return CHECKSUM_UNNECESSARY; if (!(priv->flags & MLX4_EN_FLAG_RX_CSUM_NON_TCP_UDP && (cqe->status & cpu_to_be16(MLX4_CQE_STATUS_IP_ANY))) && !short_frame(len)) return CHECKSUM_COMPLETE; /* we could also omit this case entirely */ return CHECKSUM_NONE; }/* this one could be called by the
metadata_to_skbcode */bpf_xdp_metadata_rx_csum_full(){
returncheck_csum()/*BPF_CALLthis after refactoring so it is skb-agnostic */
}/* this one would be for people like John who want to re-implement
*check_csum()themselves */bpf_xdp_metdata_rx_csum_raw(){
returncqe->checksum;
}
Quoted 4 lines
Quoted 4 lines
Are you proposing a bunch of per-driver kfuncs that bpf prog will call. If so that works, but bpf prog needs to pass dev and cqe pointers into these kfuncs, so they need to be exposed to the prog somehow. Probably through
xdp_md?
No, I didn't mean we should call per-driver kfuncs; the examples above were meant to be examples of what the mlx4 driver would unrolls those kfuncs to. Sorry that that wasn't clear.
Quoted 8 lines
So far I'm doing:
struct
mlx4_xdp_buff{
structxdp_buffxdp;
structmlx4_cqe*cqe;
structmlx4_en_dev*mdev;
}
Quoted 5 lines
And then the kfuncs get ctx (aka
xdp_buff) as a sole argument and can find cqe/mdev viacontainer_of.If we really need these to be exposed to the program, can we use Yonghong's approach from [0]?
I don't think we should expose them to the BPF program; I like your approach of stuffing them next to the CTX pointer and de-referencing that. This makes it up to the driver which extra objects it needs, and the caller doesn't have to know/care.
I'm not vehemently opposed to *also* having the rx-desc pointer directly accessible (in which case Yonghong's kfunc approach is probably fine). However, as mentioned in my previous email, I doubt how useful that descriptor itself will be...
Quoted 8 lines
Quoted 4 lines
This way we can have both: bpf prog reading cqe fields directly and using kfuncs to access things.
Inlining of kfuncs should be done generically.
It's not a driver job to convert native asm into bpf asm.Ack. I can replace the unrolling with something that just resolves "generic" kfuncs to the per-driver implementation maybe? That would at least avoid
netdev->ndo_kfunc_xxxindirect calls at runtime..
As stated above, I think we should keep the unrolling. If we end up with an actual CALL instruction for every piece of metadata that's going to suck performance-wise; unrolling is how we keep this fast enough! :)
-Toke
Re: [xdp-hints] Re: [PATCH bpf-next 05/11] veth: Support rx timestamp metadata for xdp
Quoted 9 lines · Toke Høiland-Jørgensen
Quoted 5 lines
Ack. I can replace the unrolling with something that just resolves "generic" kfuncs to the per-driver implementation maybe? That would at least avoid
netdev->ndo_kfunc_xxxindirect calls at runtime..As stated above, I think we should keep the unrolling. If we end up with an actual CALL instruction for every piece of metadata that's going to suck performance-wise; unrolling is how we keep this fast enough! :)
Let's start with pure kfuncs without requiring drivers to provide corresponding bpf asm.
If pure kfuncs will indeed turn out to be perf limiting then we'll decide on how to optimize them.
Re: [xdp-hints] Re: [PATCH bpf-next 05/11] veth: Support rx timestamp metadata for xdp
Quoted 7 lines · Alexei Starovoitov
Quoted 6 lines · Toke Høiland-Jørgensen
Quoted 5 lines
Ack. I can replace the unrolling with something that just resolves "generic" kfuncs to the per-driver implementation maybe? That would at least avoid
netdev->ndo_kfunc_xxxindirect calls at runtime..
Quoted 8 lines
Quoted 3 lines
As stated above, I think we should keep the unrolling. If we end up with an actual CALL instruction for every piece of metadata that's going to suck performance-wise; unrolling is how we keep this fast enough! :)
Let's start with pure kfuncs without requiring drivers to provide corresponding bpf asm.
If pure kfuncs will indeed turn out to be perf limiting then we'll decide on how to optimize them.
I'm ~90% sure we'll need that optimisation, but OK, we can start from a baseline of having them be function calls...
-Toke
Re: [xdp-hints] Re: [PATCH bpf-next 05/11] veth: Support rx timestamp metadata for xdp
In reply to John FastabendJust a separate comment on this bit:
Quoted 3 lines · John Fastabend
If you go with in-kernel BPF kfunc approach (vs user space side) I think you also need to add CO-RE to be friendly for driver developers? Otherwise they have to keep that read in sync with the descriptors?
CO-RE is for doing relocations of field offsets without having to recompile. That's not really relevant for the kernel, that gets recompiled whenever the layout changes. So the field offsets are just kept in sync with offsetof(), like in Stanislav's RFCv2 where he had this snippet:
+ /* return ((struct sk_buff *)r5)->tstamp; */
+ BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_5,
+ offsetof(struct sk_buff, tstamp)),
So I definitely don't think this is an argument against the kfunc approach?
Quoted 3 lines
Also need to handle versioning of descriptors where depending on specific options and firmware and chip being enabled the descriptor might be moving around.
This is exactly the kind of thing the driver is supposed to take care of; it knows the hardware configuration and can pick the right descriptor format. Either by just picking an entirely different kfunc unroll depending on the config (if it's static), or by adding the right checks to the unroll. You'd have to replicate all this logic in BPF anyway, and while I'm not doubting *you* are capable of doing this, I don't think we should be forcing every XDP developer to deal with all this.
Or to put it another way, a proper hardware abstraction and high-quality drivers is one of the main selling points of XDP over DPDK and other kernel bypass solutions; we should not jettison this when enabling metadata support!
-Toke
PATCH 6/11 xdp: Carry over xdp metadata into skb context
In reply to Stanislav FomichevImplement new bpf_xdp_metadata_export_to_skb kfunc which prepares compatible xdp metadata for kernel consumption. This kfunc should be called prior to bpf_redirect
or when XDP_PASS'ing the frame into the kernel (note, the drivers have to be updated to enable consuming XDP_PASS'ed metadata).
veth driver is amended to consume this metadata when converting to skb.
Internally, XDP_FLAGS_HAS_SKB_METADATA flag is used to indicate whether the frame has skb metadata. The metadata is currently stored prior to xdp->data_meta. bpf_xdp_adjust_meta refuses to work after a call to bpf_xdp_metadata_export_to_skb (can lift this requirement later on if needed, we'd have to memmove xdp_skb_metadata).
--- drivers/net/veth.c | 10 +-- include/linux/skbuff.h | 4 + include/net/xdp.h | 17 ++++ include/uapi/linux/bpf.h | 7 ++ kernel/bpf/verifier.c | 15 ++++ net/core/filter.c | 40 +++++++++ net/core/skbuff.c | 20 +++++ net/core/xdp.c | 145 +++++++++++++++++++++++++++++++-- tools/include/uapi/linux/bpf.h | 7 ++ 9 files changed, 255 insertions(+), 10 deletions(-)
drivers/net/veth.c +5 -5
@@ -803,7 +803,7 @@ static struct sk_buff *veth_xdp_rcv_skb(struct veth_rq *rq,void *orig_data, *orig_data_end;struct bpf_prog *xdp_prog;struct xdp_buff xdp; -u32 act, metalen; +u32 act;int off;skb_prepare_for_gro (skb);
@@ -886,9 +886,7 @@ static struct sk_buff *veth_xdp_rcv_skb(struct veth_rq *rq, skb->protocol =eth_type_trans (skb, rq->dev); - metalen = xdp.data - xdp.data_meta; -if (metalen) -skb_metadata_set (skb, metalen); +xdp_convert_skb_metadata (&xdp, skb); out:return skb; drop:
@@ -1663,7 +1661,9 @@ static int veth_xdp(struct net_device *dev, struct netdev_bpf *xdp)static void veth_unroll_kfunc (const struct bpf_prog *prog,u32 func_id,struct bpf_patch *patch) { -if (func_id ==xdp_metadata_kfunc_id (XDP_METADATA_KFUNC_RX_TIMESTAMP_SUPPORTED )) { +if (func_id ==xdp_metadata_kfunc_id (XDP_METADATA_KFUNC_EXPORT_TO_SKB )) { +return xdp_metadata_export_to_skb (prog, patch); + }else if (func_id ==xdp_metadata_kfunc_id (XDP_METADATA_KFUNC_RX_TIMESTAMP_SUPPORTED )) {/* return true; */ bpf_patch_append (patch,BPF_MOV64_IMM (BPF_REG_0 ,1 )); }else if (func_id ==xdp_metadata_kfunc_id (XDP_METADATA_KFUNC_RX_TIMESTAMP )) {
include/linux/skbuff.h +4 -0
@@ -4219,6 +4219,10 @@ static inline bool skb_metadata_differs(const struct sk_buff *skb_a, true : __skb_metadata_differs(skb_a, skb_b, len_a); } +struct xdp_skb_metadata ; +bool skb_metadata_import_from_xdp (struct sk_buff *skb, +struct xdp_skb_metadata *meta); +static inline void skb_metadata_set (struct sk_buff *skb,u8 meta_len) {skb_shinfo (skb)->meta_len = meta_len;
include/net/xdp.h +17 -0
@@ -73,6 +73,7 @@ enum xdp_buff_flags {XDP_FLAGS_FRAGS_PF_MEMALLOC =BIT (1 ),/* xdp paged memory is under * pressure */ + XDP_FLAGS_HAS_SKB_METADATA = BIT(2), /* xdp_skb_metadata */ }; struct xdp_buff {
@@ -91,6 +92,11 @@ static __always_inline bool xdp_buff_has_frags(struct xdp_buff *xdp)return !!(xdp->flags &XDP_FLAGS_HAS_FRAGS ); } +static __always_inline bool xdp_buff_has_skb_metadata(struct xdp_buff *xdp) +{ +return !!(xdp->flags &XDP_FLAGS_HAS_SKB_METADATA ); +} + static __always_inline void xdp_buff_set_frags_flag(struct xdp_buff *xdp) { xdp->flags |=XDP_FLAGS_HAS_FRAGS ;
@@ -306,6 +312,8 @@ struct xdp_frame *xdp_convert_buff_to_frame(struct xdp_buff *xdp)return xdp_frame; } +bool xdp_convert_skb_metadata (struct xdp_buff *xdp,struct sk_buff *skb); +void __xdp_return (void *data,struct xdp_mem_info *mem,bool napi_direct,struct xdp_buff *xdp);void xdp_return_frame (struct xdp_frame *xdpf);
@@ -411,6 +419,8 @@ void xdp_attachment_setup(struct xdp_attachment_info *info,#define DEV_MAP_BULK_SIZE XDP_BULK_QUEUE_SIZE#define XDP_METADATA_KFUNC_xxx \ + XDP_METADATA_KFUNC(XDP_METADATA_KFUNC_EXPORT_TO_SKB, \ + bpf_xdp_metadata_export_to_skb) \ XDP_METADATA_KFUNC(XDP_METADATA_KFUNC_RX_TIMESTAMP_SUPPORTED, \ bpf_xdp_metadata_rx_timestamp_supported) \ XDP_METADATA_KFUNC(XDP_METADATA_KFUNC_RX_TIMESTAMP, \
@@ -423,14 +433,21 @@ XDP_METADATA_KFUNC_xxx MAX_XDP_METADATA_KFUNC, }; +struct bpf_patch ; +#ifdef CONFIG_DEBUG_INFO_BTF extern struct btf_id_set8 xdp_metadata_kfunc_ids;static inline u32 xdp_metadata_kfunc_id (int id) {return xdp_metadata_kfunc_ids.pairs[id].id; } +void xdp_metadata_export_to_skb (const struct bpf_prog *prog,struct bpf_patch *patch);#else static inline u32 xdp_metadata_kfunc_id (int id) {return 0 ; } +static void xdp_metadata_export_to_skb (const struct bpf_prog *prog,struct bpf_patch *patch) +{ +return 0 ; +}#endif #endif /* __LINUX_NET_XDP_H__ */
include/uapi/linux/bpf.h +7 -0
@@ -6116,6 +6116,12 @@ enum xdp_action { XDP_REDIRECT, }; +/* Subset of XDP metadata exported to skb context. +*/ +struct xdp_skb_metadata { +__u64 rx_timestamp; +}; +/* user accessible metadata for XDP packet hook * new fields must be added to the end of this structure */
@@ -6128,6 +6134,7 @@ struct xdp_md {__u32 rx_queue_index;/* rxq->queue_index */ __u32 egress_ifindex;/* txq->dev->ifindex */ + __bpf_md_ptr(struct xdp_skb_metadata *, skb_metadata); };/* DEVMAP map-value layout
kernel/bpf/verifier.c +15 -0
@@ -14023,6 +14023,7 @@ static int unroll_kfunc_call(struct bpf_verifier_env *env,enum bpf_prog_type prog_type;struct bpf_prog_aux *aux;struct btf *desc_btf; +u32 allowed, mangled;u32 *kfunc_flags;u32 func_id;
@@ -14050,6 +14051,20 @@ static int unroll_kfunc_call(struct bpf_verifier_env *env,*/ bpf_patch_append (patch,BPF_MOV64_IMM (BPF_REG_0 ,0 )); } + + allowed =1 <<BPF_REG_0 ; + allowed |=1 <<BPF_REG_1 ; + allowed |=1 <<BPF_REG_2 ; + allowed |=1 <<BPF_REG_3 ; + allowed |=1 <<BPF_REG_4 ; + allowed |=1 <<BPF_REG_5 ; + mangled =bpf_patch_magles_registers (patch); +if (WARN_ON_ONCE (mangled & ~allowed)) { +bpf_patch_free (patch); +verbose (env,"bpf verifier is misconfigured\n" ); +return -EINVAL ; + } +return bpf_patch_err (patch); }
net/core/filter.c +40 -0
@@ -4094,6 +4094,8 @@ BPF_CALL_2(bpf_xdp_adjust_meta, struct xdp_buff *, xdp, int, offset)return -EINVAL ;if (unlikely (xdp_metalen_invalid (metalen)))return -EACCES ; +if (unlikely (xdp_buff_has_skb_metadata (xdp))) +return -EACCES ; xdp->data_meta = meta;
@@ -8690,6 +8692,8 @@ static bool __is_valid_xdp_access(int off, int size)return true; } +BTF_ID_LIST_SINGLE (xdp_to_skb_metadata_btf_ids, struct, xdp_skb_metadata); + static bool xdp_is_valid_access(int off, int size, enum bpf_access_type type, const struct bpf_prog *prog,
@@ -8722,6 +8726,18 @@ static bool xdp_is_valid_access(int off, int size,case offsetof(struct xdp_md , data_end): info->reg_type =PTR_TO_PACKET_END ;break ; +case offsetof(struct xdp_md , skb_metadata): + info->btf =bpf_get_btf_vmlinux (); +if (IS_ERR (info->btf)) +return PTR_ERR (info->btf); +if (!info->btf) +return -EINVAL ; + + info->reg_type =PTR_TO_BTF_ID_OR_NULL ; + info->btf_id = xdp_to_skb_metadata_btf_ids[0 ]; +if (size ==sizeof (__u64)) +return true; +return false; }return __is_valid_xdp_access (off, size);
@@ -9814,6 +9830,30 @@ static u32 xdp_convert_ctx_access(enum bpf_access_type type, *insn++ =BPF_LDX_MEM (BPF_W , si->dst_reg, si->dst_reg, offsetof(struct net_device , ifindex));break ; +case offsetof(struct xdp_md , skb_metadata): +/* dst_reg = xdp_buff->flags; */ + *insn++ = BPF_LDX_MEM(BPF_FIELD_SIZEOF(struct xdp_buff, flags), + si->dst_reg, si->src_reg, + offsetof(struct xdp_buff , flags)); +/* dst_reg &= XDP_FLAGS_HAS_SKB_METADATA; */ + *insn++ =BPF_ALU64_IMM (BPF_AND , si->dst_reg, +XDP_FLAGS_HAS_SKB_METADATA ); + +/* if (dst_reg != 0) { */ + *insn++ =BPF_JMP_IMM (BPF_JEQ , si->dst_reg,0 ,3 ); +/* dst_reg = xdp_buff->data_meta; */ + *insn++ = BPF_LDX_MEM(BPF_FIELD_SIZEOF(struct xdp_buff, data_meta), + si->dst_reg, si->src_reg, + offsetof(struct xdp_buff , data_meta)); +/* dst_reg -= sizeof(struct xdp_skb_metadata); */ + *insn++ =BPF_ALU64_IMM (BPF_SUB , si->dst_reg, +sizeof (struct xdp_skb_metadata )); + *insn++ =BPF_JMP_A (1 ); +/* } else { */ +/* return 0; */ + *insn++ =BPF_MOV32_IMM (si->dst_reg,0 ); +/* } */ +break ; }return insn - insn_buf;
net/core/skbuff.c +20 -0
@@ -72,6 +72,7 @@#include <net/mptcp.h> #include <net/mctp.h> #include <net/page_pool.h> +#include <net/xdp.h> #include <linux/uaccess.h> #include <trace/events/skb.h>
@@ -6675,3 +6676,22 @@ nodefer: __kfree_skb(skb);if (unlikely (kick) && !cmpxchg (&sd->defer_ipi_scheduled,0 ,1 ))smp_call_function_single_async (cpu, &sd->defer_csd); } + +bool skb_metadata_import_from_xdp (struct sk_buff *skb, +struct xdp_skb_metadata *meta) +{ +/* Optional SKB info, currently missing: +* - HW checksum info (skb->ip_summed) +* - HW RX hash (skb_set_hash) +* - RX ring dev queue index (skb_record_rx_queue) +*/ + +if (meta->rx_timestamp) { + *skb_hwtstamps (skb) = (struct skb_shared_hwtstamps ){ + .hwtstamp =ns_to_ktime (meta->rx_timestamp), + }; + } + +return true; +} +EXPORT_SYMBOL (skb_metadata_import_from_xdp);
net/core/xdp.c +140 -5
184 lines not on this page · raw message
tools/include/uapi/linux/bpf.h +7 -0
@@ -6116,6 +6116,12 @@ enum xdp_action { XDP_REDIRECT, }; +/* Subset of XDP metadata exported to skb context. +*/ +struct xdp_skb_metadata { +__u64 rx_timestamp; +}; +/* user accessible metadata for XDP packet hook * new fields must be added to the end of this structure */
@@ -6128,6 +6134,7 @@ struct xdp_md {__u32 rx_queue_index;/* rxq->queue_index */ __u32 egress_ifindex;/* txq->dev->ifindex */ + __bpf_md_ptr(struct xdp_skb_metadata *, skb_metadata); };/* DEVMAP map-value layout
Signature · 1 line
2.38.1.431.g37b22c650d-goog
Re: [xdp-hints] [PATCH bpf-next 06/11] xdp: Carry over xdp metadata into skb context
include/uapi/linux/bpf.h enum xdp_action { · line 6123
Quoted 13 lines
include/uapi/linux/bpf.h +5
-0@@ -6116,6 +6116,12 @@ enum xdp_action { XDP_REDIRECT, }; +/* Subset of XDP metadata exported to skb context. +*/ +struct xdp_skb_metadata { +__u64 rx_timestamp; +};
Okay, so given Alexei's comment about __randomize_struct not actually working, I think we need to come up with something else for this. Just sticking this in a regular UAPI header seems like a bad idea; we'd just be inviting people to use it as-is.
Do we actually need the full definition here? It's just a pointer declaration below, so is an opaque forward-definition enough? Then we could have the full definition in an internal header, moving the full definition back to being in vmlinux.h only?
-Toke
Re: [xdp-hints] [PATCH bpf-next 06/11] xdp: Carry over xdp metadata into skb context
Quoted 20 lines · Toke Høiland-Jørgensen
Quoted 6 lines
include/uapi/linux/bpf.h +0
-0include/uapi/linux/bpf.h enum xdp_action { · line 6123
Quoted 8 lines
include/uapi/linux/bpf.h +5
-0@@ -6116,6 +6116,12 @@ enum xdp_action { XDP_REDIRECT, }; +/* Subset of XDP metadata exported to skb context. +*/ +struct xdp_skb_metadata { +__u64 rx_timestamp; +};Okay, so given Alexei's comment about
__randomize_structnot actually working, I think we need to come up with something else for this. Just sticking this in a regular UAPI header seems like a bad idea; we'd just be inviting people to use it as-is.
Quoted 4 lines
Do we actually need the full definition here? It's just a pointer declaration below, so is an opaque forward-definition enough? Then we could have the full definition in an internal header, moving the full definition back to being in
vmlinux.honly?
Looks like having a uapi-declaration only (and moving the definition into the kernel headers) might work. At least it does in my limited testing :-) So let's go with that for now. Alexei, thanks for the context on __randomize_struct!
Re: [xdp-hints] Re: [PATCH bpf-next 06/11] xdp: Carry over xdp metadata into skb context
Quoted 26 lines · Stanislav Fomichev
Quoted 20 lines · Toke Høiland-Jørgensen
Quoted 6 lines
include/uapi/linux/bpf.h +0
-0include/uapi/linux/bpf.h enum xdp_action { · line 6123
Quoted 8 lines
include/uapi/linux/bpf.h +5
-0@@ -6116,6 +6116,12 @@ enum xdp_action { XDP_REDIRECT, }; +/* Subset of XDP metadata exported to skb context. +*/ +struct xdp_skb_metadata { +__u64 rx_timestamp; +};Okay, so given Alexei's comment about
__randomize_structnot actually working, I think we need to come up with something else for this. Just sticking this in a regular UAPI header seems like a bad idea; we'd just be inviting people to use it as-is.Quoted 4 lines
Do we actually need the full definition here? It's just a pointer declaration below, so is an opaque forward-definition enough? Then we could have the full definition in an internal header, moving the full definition back to being in
vmlinux.honly?
Quoted 4 lines
Looks like having a uapi-declaration only (and moving the definition into the kernel headers) might work. At least it does in my limited testing :-) So let's go with that for now. Alexei, thanks for the context on
__randomize_struct!
Sounds good! :)
-Toke
kernel test robot
build botRe: [PATCH bpf-next 06/11] xdp: Carry over xdp metadata into skb context
In reply to Stanislav FomichevI love your patch! Perhaps something to improve:
Hi Stanislav,
I love your patch! Perhaps something to improve:
[auto build test WARNING on bpf-next/master]
url: https://github.com/intel-lab-lkp/linux/commits/Stanislav-Fomichev/xdp-hints-via-kfuncs/20221115-110547 base: https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next.git master patch link: https://lore.kernel.org/r/20221115030210.3159213-7-sdf%40google.com patch subject: [PATCH bpf-next 06/11] xdp: Carry over xdp metadata into skb context config: hexagon-randconfig-r031-20221115 compiler: clang version 16.0.0 (https://github.com/llvm/llvm-project 463da45892e2d2a262277b91b96f5f8c05dc25d0)
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross
# https://github.com/intel-lab-lkp/linux/commit/5c7e4e60d13af8491563dd4d2ad5fc684420e540
git remote add linux-review https://github.com/intel-lab-lkp/linux
git fetch --no-tags linux-review Stanislav-Fomichev/xdp-hints-via-kfuncs/20221115-110547
git checkout 5c7e4e60d13af8491563dd4d2ad5fc684420e540
# save the config file
mkdir build_dir && cp config build_dir/.config
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross W=1 O=build_dir ARCH=hexagon SHELL=/bin/bash net/sched/
If you fix the issue, kindly add following tag where applicable | Reported-by: kernel test robot <[email protected]>
All warnings (new ones prefixed by >>):
In file included from net/sched/cls_flow.c:14:
In file included from include/linux/skbuff.h:17:
In file included from include/linux/bvec.h:10:
In file included from include/linux/highmem.h:12:
In file included from include/linux/hardirq.h:11:
In file included from ./arch/hexagon/include/generated/asm/hardirq.h:1:
In file included from include/asm-generic/hardirq.h:17:
In file included from include/linux/irq.h:20:
In file included from include/linux/io.h:13:
In file included from arch/hexagon/include/asm/io.h:334:
include/asm-generic/io.h:547:31: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
val = __raw_readb(PCI_IOBASE + addr);
~~~~~~~~~~ ^
include/asm-generic/io.h:560:61: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
val = __le16_to_cpu((__le16 __force)__raw_readw(PCI_IOBASE + addr));
~~~~~~~~~~ ^
include/uapi/linux/byteorder/little_endian.h:37:51: note: expanded from macro '__le16_to_cpu'
#define __le16_to_cpu(x) ((__force __u16)(__le16)(x))
^
In file included from net/sched/cls_flow.c:14:
In file included from include/linux/skbuff.h:17:
In file included from include/linux/bvec.h:10:
In file included from include/linux/highmem.h:12:
In file included from include/linux/hardirq.h:11:
In file included from ./arch/hexagon/include/generated/asm/hardirq.h:1:
In file included from include/asm-generic/hardirq.h:17:
In file included from include/linux/irq.h:20:
In file included from include/linux/io.h:13:
In file included from arch/hexagon/include/asm/io.h:334:
include/asm-generic/io.h:573:61: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
val = __le32_to_cpu((__le32 __force)__raw_readl(PCI_IOBASE + addr));
~~~~~~~~~~ ^
include/uapi/linux/byteorder/little_endian.h:35:51: note: expanded from macro '__le32_to_cpu'
#define __le32_to_cpu(x) ((__force __u32)(__le32)(x))
^
In file included from net/sched/cls_flow.c:14:
In file included from include/linux/skbuff.h:17:
In file included from include/linux/bvec.h:10:
In file included from include/linux/highmem.h:12:
In file included from include/linux/hardirq.h:11:
In file included from ./arch/hexagon/include/generated/asm/hardirq.h:1:
In file included from include/asm-generic/hardirq.h:17:
In file included from include/linux/irq.h:20:
In file included from include/linux/io.h:13:
In file included from arch/hexagon/include/asm/io.h:334:
include/asm-generic/io.h:584:33: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
__raw_writeb(value, PCI_IOBASE + addr);
~~~~~~~~~~ ^
include/asm-generic/io.h:594:59: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
__raw_writew((u16 __force)cpu_to_le16(value), PCI_IOBASE + addr);
~~~~~~~~~~ ^
include/asm-generic/io.h:604:59: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
__raw_writel((u32 __force)cpu_to_le32(value), PCI_IOBASE + addr);
~~~~~~~~~~ ^
In file included from net/sched/cls_flow.c:17:
In file included from include/linux/ipv6.h:93:
In file included from include/linux/tcp.h:19:
In file included from include/net/sock.h:46:
In file included from include/linux/netdevice.h:43:
include/net/xdp.h:449:2: error: void function 'xdp_metadata_export_to_skb' should not return a value [-Wreturn-type]
return 0;
^ ~
>> net/sched/cls_flow.c:63:52: warning: shift count >= width of type [-Wshift-count-overflow]
return (a & 0xFFFFFFFF) ^ (BITS_PER_LONG > 32 ? a >> 32 : 0);
^ ~~7 warnings and 1 error generated.
vim +63 net/sched/cls_flow.c
e5dfb815181fcb Patrick McHardy 2008-01-31 58
e5dfb815181fcb Patrick McHardy 2008-01-31 59 static inline u32 addr_fold(void *addr)
e5dfb815181fcb Patrick McHardy 2008-01-31 60 {
e5dfb815181fcb Patrick McHardy 2008-01-31 61 unsigned long a = (unsigned long)addr;
e5dfb815181fcb Patrick McHardy 2008-01-31 62 e5dfb815181fcb Patrick McHardy 2008-01-31 @63 return (a & 0xFFFFFFFF) ^ (BITS_PER_LONG > 32 ? a >> 32 : 0);e5dfb815181fcb Patrick McHardy 2008-01-31 64 }e5dfb815181fcb Patrick McHardy 2008-01-31 65
Signature · 2 lines
0-DAY CI Kernel Test Service https://01.org/lkp
#
# Automatically generated file; DO NOT EDIT.
# Linux/hexagon 6.1.0-rc4 Kernel Configuration
#CONFIG_CC_VERSION_TEXT="clang version 16.0.0 (git://gitmirror/llvm_project 463da45892e2d2a262277b91b96f5f8c05dc25d0)" CONFIG_GCC_VERSION=0CONFIG_CC_IS_CLANG=yCONFIG_CLANG_VERSION=160000CONFIG_AS_IS_LLVM=yCONFIG_AS_VERSION=160000CONFIG_LD_VERSION=0CONFIG_LD_IS_LLD=yCONFIG_LLD_VERSION=160000CONFIG_RUST_IS_AVAILABLE=yCONFIG_CC_HAS_ASM_GOTO_OUTPUT=yCONFIG_TOOLS_SUPPORT_RELR=yCONFIG_CC_HAS_ASM_INLINE=yCONFIG_CC_HAS_NO_PROFILE_FN_ATTR=yCONFIG_PAHOLE_VERSION=123CONFIG_IRQ_WORK=y
#
# General setup
#CONFIG_BROKEN_ON_SMP=yCONFIG_INIT_ENV_ARG_LIMIT=32CONFIG_COMPILE_TEST=y
# CONFIG_WERROR is not setCONFIG_LOCALVERSION=""CONFIG_BUILD_SALT=""CONFIG_DEFAULT_INIT=""CONFIG_DEFAULT_HOSTNAME="(none)"CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not setCONFIG_WATCH_QUEUE=yCONFIG_CROSS_MEMORY_ATTACH=y
# CONFIG_USELIB is not setCONFIG_AUDIT=y
#
# IRQ subsystem
#CONFIG_GENERIC_IRQ_PROBE=yCONFIG_GENERIC_IRQ_SHOW=yCONFIG_GENERIC_IRQ_INJECTION=yCONFIG_GENERIC_IRQ_CHIP=yCONFIG_IRQ_DOMAIN=yCONFIG_IRQ_SIM=yCONFIG_IRQ_DOMAIN_HIERARCHY=yCONFIG_IRQ_FASTEOI_HIERARCHY_HANDLERS=yCONFIG_GENERIC_IRQ_DEBUGFS=y
# end of IRQ subsystem
CONFIG_GENERIC_CLOCKEVENTS=yCONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
#
# Timers subsystem
#CONFIG_TICK_ONESHOT=yCONFIG_HZ_PERIODIC=y
# CONFIG_NO_HZ_IDLE is not setCONFIG_NO_HZ=yCONFIG_HIGH_RES_TIMERS=y
# end of Timers subsystem
CONFIG_BPF=y
#
# BPF subsystem
#CONFIG_BPF_SYSCALL=y
# CONFIG_BPF_UNPRIV_DEFAULT_OFF is not set
# end of BPF subsystem
CONFIG_PREEMPT_NONE_BUILD=yCONFIG_PREEMPT_NONE=y
#
# CPU/Task time and stats accounting
#CONFIG_TICK_CPU_ACCOUNTING=yCONFIG_BSD_PROCESS_ACCT=yCONFIG_BSD_PROCESS_ACCT_V3=y
# CONFIG_TASKSTATS is not set
# CONFIG_PSI is not set
# end of CPU/Task time and stats accounting
CONFIG_CPU_ISOLATION=y
#
# RCU Subsystem
#CONFIG_TINY_RCU=y
# CONFIG_RCU_EXPERT is not setCONFIG_SRCU=yCONFIG_TINY_SRCU=yCONFIG_TASKS_RCU_GENERIC=yCONFIG_TASKS_TRACE_RCU=yCONFIG_RCU_NEED_SEGCBLIST=y
# end of RCU Subsystem
# CONFIG_IKCONFIG is not setCONFIG_IKHEADERS=yCONFIG_LOG_BUF_SHIFT=17CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13CONFIG_PRINTK_INDEX=y
#
# Scheduler features
#
# end of Scheduler features
CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough" CONFIG_GCC12_NO_ARRAY_BOUNDS=y CONFIG_CGROUPS=yCONFIG_PAGE_COUNTER=y CONFIG_CGROUP_FAVOR_DYNMODS=yCONFIG_MEMCG=yCONFIG_MEMCG_KMEM=yCONFIG_CGROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_CFS_BANDWIDTH is not set CONFIG_RT_GROUP_SCHED=y
# CONFIG_CGROUP_PIDS is not set CONFIG_CGROUP_RDMA=yCONFIG_CGROUP_FREEZER=yCONFIG_CGROUP_DEVICE=yCONFIG_CGROUP_CPUACCT=yCONFIG_CGROUP_BPF=yCONFIG_CGROUP_MISC=yCONFIG_CGROUP_DEBUG=y CONFIG_SOCK_CGROUP_DATA=yCONFIG_NAMESPACES=yCONFIG_UTS_NS=y
# CONFIG_IPC_NS is not setCONFIG_USER_NS=yCONFIG_PID_NS=y
# CONFIG_NET_NS is not set CONFIG_SCHED_AUTOGROUP=y CONFIG_SYSFS_DEPRECATED=y
# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE=""CONFIG_RD_GZIP=yCONFIG_RD_BZIP2=yCONFIG_RD_LZMA=y
# CONFIG_RD_XZ is not setCONFIG_RD_LZO=yCONFIG_RD_LZ4=y
# CONFIG_RD_ZSTD is not set
# CONFIG_BOOT_CONFIG is not set CONFIG_INITRAMFS_PRESERVE_MTIME=y CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_LD_ORPHAN_WARN=yCONFIG_EXPERT=yCONFIG_MULTIUSER=y
# CONFIG_SGETMASK_SYSCALL is not set CONFIG_SYSFS_SYSCALL=yCONFIG_FHANDLE=y
# CONFIG_POSIX_TIMERS is not set CONFIG_PRINTK=y
# CONFIG_BUG is not setCONFIG_ELF_CORE=y
# CONFIG_BASE_FULL is not setCONFIG_FUTEX=yCONFIG_FUTEX_PI=y
# CONFIG_EPOLL is not setCONFIG_SIGNALFD=yCONFIG_TIMERFD=yCONFIG_EVENTFD=yCONFIG_SHMEM=yCONFIG_AIO=y
# CONFIG_IO_URING is not set CONFIG_ADVISE_SYSCALLS=yCONFIG_MEMBARRIER=yCONFIG_KALLSYMS=yCONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_BASE_RELATIVE=yCONFIG_KCMP=y
# CONFIG_EMBEDDED is not set CONFIG_HAVE_PERF_EVENTS=y
# CONFIG_PC104 is not set
#
# Kernel Performance Events And Counters
#
# CONFIG_PERF_EVENTS is not set
# end of Kernel Performance Events And Counters
CONFIG_SYSTEM_DATA_VERIFICATION=yCONFIG_PROFILING=y
# end of General setup
#
# Linux Kernel Configuration for Hexagon
#CONFIG_HEXAGON=yCONFIG_HEXAGON_PHYS_OFFSET=yCONFIG_FRAME_POINTER=yCONFIG_LOCKDEP_SUPPORT=yCONFIG_EARLY_PRINTK=yCONFIG_MMU=yCONFIG_GENERIC_CSUM=yCONFIG_GENERIC_HWEIGHT=yCONFIG_STACKTRACE_SUPPORT=y
#
# Machine selection
#CONFIG_HEXAGON_COMET=yCONFIG_HEXAGON_ARCH_VERSION=2CONFIG_CMDLINE=""
# CONFIG_SMP is not setCONFIG_NR_CPUS=1
# CONFIG_PAGE_SIZE_4KB is not setCONFIG_PAGE_SIZE_16KB=y
# CONFIG_PAGE_SIZE_64KB is not set
# CONFIG_PAGE_SIZE_256KB is not setCONFIG_HZ_100=y
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not setCONFIG_HZ=100CONFIG_SCHED_HRTICK=y
# end of Machine selection
#
# General architecture-dependent options
#CONFIG_TRACE_IRQFLAGS_SUPPORT=yCONFIG_HAVE_ARCH_TRACEHOOK=yCONFIG_GENERIC_SMP_IDLE_THREAD=yCONFIG_ARCH_32BIT_OFF_T=yCONFIG_LTO_NONE=yCONFIG_MODULES_USE_ELF_RELA=yCONFIG_PGTABLE_LEVELS=2CONFIG_PAGE_SIZE_LESS_THAN_64KB=yCONFIG_PAGE_SIZE_LESS_THAN_256KB=yCONFIG_COMPAT_32BIT_TIME=yCONFIG_ARCH_NO_PREEMPT=y
# CONFIG_LOCK_EVENT_COUNTS is not setCONFIG_ARCH_WANT_LD_ORPHAN_WARN=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
# end of GCOV-based kernel profiling # end of General architecture-dependent options
CONFIG_RT_MUTEXES=yCONFIG_BASE_SMALL=1CONFIG_MODULES=yCONFIG_MODULE_FORCE_LOAD=y
# CONFIG_MODULE_UNLOAD is not setCONFIG_MODVERSIONS=yCONFIG_MODULE_SRCVERSION_ALL=y
# CONFIG_MODULE_SIG is not set
# CONFIG_MODULE_COMPRESS_NONE is not set
# CONFIG_MODULE_COMPRESS_GZIP is not setCONFIG_MODULE_COMPRESS_XZ=y
# CONFIG_MODULE_COMPRESS_ZSTD is not set
# CONFIG_MODULE_DECOMPRESS is not setCONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS=yCONFIG_MODPROBE_PATH="/sbin/modprobe"
# CONFIG_BLOCK is not setCONFIG_ASN1=yCONFIG_UNINLINE_SPIN_UNLOCK=yCONFIG_FREEZER=y
#
# Executable file formats
#CONFIG_BINFMT_ELF=yCONFIG_ELFCORE=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not setCONFIG_BINFMT_SCRIPT=mCONFIG_BINFMT_MISC=yCONFIG_COREDUMP=y
# end of Executable file formats
#
# Memory Management options
#
#
# SLAB allocator options
#
# CONFIG_SLAB is not setCONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_SLAB_MERGE_DEFAULT is not setCONFIG_SLAB_FREELIST_RANDOM=y
# CONFIG_SLAB_FREELIST_HARDENED is not set
# CONFIG_SLUB_STATS is not set
# end of SLAB allocator options
CONFIG_SHUFFLE_PAGE_ALLOCATOR=y
# CONFIG_COMPAT_BRK is not setCONFIG_FLATMEM=yCONFIG_EXCLUSIVE_SYSTEM_RAM=yCONFIG_SPLIT_PTLOCK_CPUS=4CONFIG_MEMORY_BALLOON=yCONFIG_BALLOON_COMPACTION=yCONFIG_COMPACTION=yCONFIG_COMPACT_UNEVICTABLE_DEFAULT=1CONFIG_PAGE_REPORTING=yCONFIG_MIGRATION=yCONFIG_KSM=yCONFIG_DEFAULT_MMAP_MIN_ADDR=4096CONFIG_NEED_PER_CPU_KM=y
# CONFIG_CMA is not set
# CONFIG_IDLE_PAGE_TRACKING is not set
# CONFIG_VM_EVENT_COUNTERS is not set
# CONFIG_PERCPU_STATS is not set
# CONFIG_GUP_TEST is not setCONFIG_USERFAULTFD=y
# CONFIG_LRU_GEN is not set
#
# Data Access Monitoring
#
# CONFIG_DAMON is not set
# end of Data Access Monitoring # end of Memory Management options
CONFIG_NET=yCONFIG_NET_EGRESS=yCONFIG_SKB_EXTENSIONS=y
#
# Networking options
#CONFIG_PACKET=mCONFIG_PACKET_DIAG=m
# CONFIG_UNIX is not setCONFIG_TLS=m
# CONFIG_TLS_DEVICE is not set
# CONFIG_TLS_TOE is not setCONFIG_XFRM=yCONFIG_XFRM_OFFLOAD=yCONFIG_XFRM_ALGO=yCONFIG_XFRM_USER=m
# CONFIG_XFRM_INTERFACE is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not setCONFIG_XFRM_AH=yCONFIG_XFRM_ESP=yCONFIG_XFRM_IPCOMP=mCONFIG_NET_KEY=y
# CONFIG_NET_KEY_MIGRATE is not set
# CONFIG_SMC is not set
# CONFIG_XDP_SOCKETS is not setCONFIG_INET=yCONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not setCONFIG_IP_PNP=y
# CONFIG_IP_PNP_DHCP is not setCONFIG_IP_PNP_BOOTP=y
# CONFIG_IP_PNP_RARP is not setCONFIG_NET_IPIP=yCONFIG_NET_IPGRE_DEMUX=mCONFIG_NET_IP_TUNNEL=y
# CONFIG_NET_IPGRE is not setCONFIG_IP_MROUTE_COMMON=y
# CONFIG_IP_MROUTE is not setCONFIG_SYN_COOKIES=y
# CONFIG_NET_IPVTI is not setCONFIG_NET_UDP_TUNNEL=yCONFIG_NET_FOU=m
# CONFIG_NET_FOU_IP_TUNNELS is not setCONFIG_INET_AH=yCONFIG_INET_ESP=yCONFIG_INET_ESP_OFFLOAD=y
# CONFIG_INET_ESPINTCP is not setCONFIG_INET_IPCOMP=mCONFIG_INET_XFRM_TUNNEL=mCONFIG_INET_TUNNEL=yCONFIG_INET_DIAG=mCONFIG_INET_TCP_DIAG=mCONFIG_INET_UDP_DIAG=m
# CONFIG_INET_RAW_DIAG is not set
# CONFIG_INET_DIAG_DESTROY is not set
# CONFIG_TCP_CONG_ADVANCED is not setCONFIG_TCP_CONG_CUBIC=yCONFIG_DEFAULT_TCP_CONG="cubic"CONFIG_TCP_MD5SIG=yCONFIG_IPV6=yCONFIG_IPV6_ROUTER_PREF=yCONFIG_IPV6_ROUTE_INFO=yCONFIG_IPV6_OPTIMISTIC_DAD=yCONFIG_INET6_AH=mCONFIG_INET6_ESP=mCONFIG_INET6_ESP_OFFLOAD=m
# CONFIG_INET6_ESPINTCP is not set
# CONFIG_INET6_IPCOMP is not setCONFIG_IPV6_MIP6=mCONFIG_IPV6_ILA=yCONFIG_INET6_TUNNEL=yCONFIG_IPV6_VTI=mCONFIG_IPV6_SIT=m
# CONFIG_IPV6_SIT_6RD is not setCONFIG_IPV6_NDISC_NODETYPE=yCONFIG_IPV6_TUNNEL=yCONFIG_IPV6_GRE=mCONFIG_IPV6_FOU=m
# CONFIG_IPV6_MULTIPLE_TABLES is not setCONFIG_IPV6_MROUTE=y
# CONFIG_IPV6_MROUTE_MULTIPLE_TABLES is not set
# CONFIG_IPV6_PIMSM_V2 is not set
# CONFIG_IPV6_SEG6_LWTUNNEL is not set
# CONFIG_IPV6_SEG6_HMAC is not set
# CONFIG_IPV6_RPL_LWTUNNEL is not set
# CONFIG_IPV6_IOAM6_LWTUNNEL is not set
# CONFIG_MPTCP is not setCONFIG_NETWORK_SECMARK=y
# CONFIG_NETWORK_PHY_TIMESTAMPING is not setCONFIG_NETFILTER=y
# CONFIG_NETFILTER_ADVANCED is not set
#
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_INGRESS is not setCONFIG_NETFILTER_EGRESS=yCONFIG_NETFILTER_NETLINK=yCONFIG_NETFILTER_FAMILY_ARP=yCONFIG_NETFILTER_NETLINK_LOG=yCONFIG_NF_CONNTRACK=yCONFIG_NF_LOG_SYSLOG=yCONFIG_NF_CONNTRACK_SECMARK=y
# CONFIG_NF_CONNTRACK_LABELS is not set
# CONFIG_NF_CONNTRACK_FTP is not set
# CONFIG_NF_CONNTRACK_IRC is not setCONFIG_NF_CONNTRACK_BROADCAST=mCONFIG_NF_CONNTRACK_NETBIOS_NS=mCONFIG_NF_CONNTRACK_SIP=mCONFIG_NF_CT_NETLINK=y
# CONFIG_NETFILTER_NETLINK_GLUE_CT is not setCONFIG_NF_NAT=yCONFIG_NF_NAT_SIP=mCONFIG_NF_NAT_MASQUERADE=yCONFIG_NF_TABLES=yCONFIG_NF_TABLES_INET=y
# CONFIG_NF_TABLES_NETDEV is not setCONFIG_NFT_NUMGEN=mCONFIG_NFT_CT=mCONFIG_NFT_LOG=mCONFIG_NFT_LIMIT=yCONFIG_NFT_MASQ=m
# CONFIG_NFT_REDIR is not set
# CONFIG_NFT_NAT is not setCONFIG_NFT_TUNNEL=mCONFIG_NFT_QUOTA=mCONFIG_NFT_REJECT=yCONFIG_NFT_REJECT_INET=yCONFIG_NFT_COMPAT=yCONFIG_NFT_HASH=mCONFIG_NFT_FIB=yCONFIG_NFT_FIB_INET=mCONFIG_NFT_XFRM=y
# CONFIG_NFT_SOCKET is not setCONFIG_NFT_TPROXY=mCONFIG_NETFILTER_XTABLES=y
#
# Xtables combined modules
#
# CONFIG_NETFILTER_XT_MARK is not set
#
# Xtables targets
#
# CONFIG_NETFILTER_XT_TARGET_CONNSECMARK is not set # CONFIG_NETFILTER_XT_TARGET_LOG is not set CONFIG_NETFILTER_XT_NAT=y CONFIG_NETFILTER_XT_TARGET_NETMAP=m CONFIG_NETFILTER_XT_TARGET_NFLOG=y
# CONFIG_NETFILTER_XT_TARGET_REDIRECT is not set # CONFIG_NETFILTER_XT_TARGET_MASQUERADE is not set CONFIG_NETFILTER_XT_TARGET_SECMARK=y CONFIG_NETFILTER_XT_TARGET_TCPMSS=y
#
# Xtables matches
#CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not setCONFIG_NETFILTER_XT_MATCH_POLICY=m
# CONFIG_NETFILTER_XT_MATCH_STATE is not set
# end of Core Netfilter Configuration
# CONFIG_IP_SET is not set
# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#CONFIG_NF_DEFRAG_IPV4=yCONFIG_NF_SOCKET_IPV4=mCONFIG_NF_TPROXY_IPV4=yCONFIG_NF_TABLES_IPV4=yCONFIG_NFT_REJECT_IPV4=yCONFIG_NFT_DUP_IPV4=mCONFIG_NFT_FIB_IPV4=yCONFIG_NF_TABLES_ARP=yCONFIG_NF_DUP_IPV4=yCONFIG_NF_LOG_ARP=m
# CONFIG_NF_LOG_IPV4 is not setCONFIG_NF_REJECT_IPV4=yCONFIG_IP_NF_IPTABLES=y
# CONFIG_IP_NF_FILTER is not setCONFIG_IP_NF_NAT=y
# CONFIG_IP_NF_TARGET_MASQUERADE is not set
# CONFIG_IP_NF_MANGLE is not set
# CONFIG_IP_NF_RAW is not set
# end of IP: Netfilter Configuration
#
# IPv6: Netfilter Configuration
#CONFIG_NF_SOCKET_IPV6=mCONFIG_NF_TPROXY_IPV6=yCONFIG_NF_TABLES_IPV6=yCONFIG_NFT_REJECT_IPV6=yCONFIG_NFT_DUP_IPV6=yCONFIG_NFT_FIB_IPV6=yCONFIG_NF_DUP_IPV6=yCONFIG_NF_REJECT_IPV6=yCONFIG_NF_LOG_IPV6=yCONFIG_IP6_NF_IPTABLES=y
# CONFIG_IP6_NF_MATCH_IPV6HEADER is not setCONFIG_IP6_NF_FILTER=mCONFIG_IP6_NF_TARGET_REJECT=mCONFIG_IP6_NF_MANGLE=mCONFIG_IP6_NF_RAW=m
# end of IPv6: Netfilter Configuration
CONFIG_NF_DEFRAG_IPV6=y
# CONFIG_NF_CONNTRACK_BRIDGE is not set
# CONFIG_BPFILTER is not setCONFIG_IP_DCCP=yCONFIG_INET_DCCP_DIAG=m
#
# DCCP CCIDs Configuration
#
# CONFIG_IP_DCCP_CCID2_DEBUG is not setCONFIG_IP_DCCP_CCID3=y
# CONFIG_IP_DCCP_CCID3_DEBUG is not setCONFIG_IP_DCCP_TFRC_LIB=y
# end of DCCP CCIDs Configuration
#
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
# end of DCCP Kernel Hacking
CONFIG_IP_SCTP=y
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5 is not setCONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1=y
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set
# CONFIG_SCTP_COOKIE_HMAC_MD5 is not setCONFIG_SCTP_COOKIE_HMAC_SHA1=yCONFIG_INET_SCTP_DIAG=mCONFIG_RDS=yCONFIG_RDS_RDMA=yCONFIG_RDS_TCP=mCONFIG_RDS_DEBUG=yCONFIG_TIPC=m
# CONFIG_TIPC_MEDIA_IB is not set
# CONFIG_TIPC_MEDIA_UDP is not setCONFIG_TIPC_CRYPTO=y
# CONFIG_TIPC_DIAG is not setCONFIG_ATM=m
# CONFIG_ATM_CLIP is not setCONFIG_ATM_LANE=m
# CONFIG_ATM_MPOA is not set
# CONFIG_ATM_BR2684 is not set
# CONFIG_L2TP is not setCONFIG_MRP=y
# CONFIG_BRIDGE is not set
# CONFIG_NET_DSA is not setCONFIG_VLAN_8021Q=y
# CONFIG_VLAN_8021Q_GVRP is not setCONFIG_VLAN_8021Q_MVRP=yCONFIG_LLC=mCONFIG_LLC2=m
# CONFIG_ATALK is not setCONFIG_X25=mCONFIG_LAPB=yCONFIG_PHONET=yCONFIG_6LOWPAN=m
# CONFIG_6LOWPAN_DEBUGFS is not setCONFIG_6LOWPAN_NHC=mCONFIG_6LOWPAN_NHC_DEST=mCONFIG_6LOWPAN_NHC_FRAGMENT=m
# CONFIG_6LOWPAN_NHC_HOP is not setCONFIG_6LOWPAN_NHC_IPV6=mCONFIG_6LOWPAN_NHC_MOBILITY=mCONFIG_6LOWPAN_NHC_ROUTING=mCONFIG_6LOWPAN_NHC_UDP=m
# CONFIG_6LOWPAN_GHC_EXT_HDR_HOP is not set
# CONFIG_6LOWPAN_GHC_UDP is not set
# CONFIG_6LOWPAN_GHC_ICMPV6 is not setCONFIG_6LOWPAN_GHC_EXT_HDR_DEST=mCONFIG_6LOWPAN_GHC_EXT_HDR_FRAG=mCONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE=mCONFIG_IEEE802154=mCONFIG_IEEE802154_NL802154_EXPERIMENTAL=y
# CONFIG_IEEE802154_SOCKET is not setCONFIG_IEEE802154_6LOWPAN=mCONFIG_MAC802154=mCONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#CONFIG_NET_SCH_CBQ=mCONFIG_NET_SCH_HTB=mCONFIG_NET_SCH_HFSC=yCONFIG_NET_SCH_ATM=mCONFIG_NET_SCH_PRIO=yCONFIG_NET_SCH_MULTIQ=m
# CONFIG_NET_SCH_RED is not setCONFIG_NET_SCH_SFB=y
# CONFIG_NET_SCH_SFQ is not setCONFIG_NET_SCH_TEQL=mCONFIG_NET_SCH_TBF=yCONFIG_NET_SCH_CBS=mCONFIG_NET_SCH_ETF=y
# CONFIG_NET_SCH_TAPRIO is not set
# CONFIG_NET_SCH_GRED is not setCONFIG_NET_SCH_DSMARK=yCONFIG_NET_SCH_NETEM=mCONFIG_NET_SCH_DRR=mCONFIG_NET_SCH_MQPRIO=y
# CONFIG_NET_SCH_SKBPRIO is not setCONFIG_NET_SCH_CHOKE=yCONFIG_NET_SCH_QFQ=mCONFIG_NET_SCH_CODEL=yCONFIG_NET_SCH_FQ_CODEL=yCONFIG_NET_SCH_CAKE=y
# CONFIG_NET_SCH_FQ is not setCONFIG_NET_SCH_HHF=mCONFIG_NET_SCH_PIE=yCONFIG_NET_SCH_FQ_PIE=mCONFIG_NET_SCH_PLUG=yCONFIG_NET_SCH_ETS=m
# CONFIG_NET_SCH_DEFAULT is not set
#
# Classification
#CONFIG_NET_CLS=y
# CONFIG_NET_CLS_BASIC is not set
# CONFIG_NET_CLS_TCINDEX is not set
# CONFIG_NET_CLS_ROUTE4 is not setCONFIG_NET_CLS_FW=yCONFIG_NET_CLS_U32=y
# CONFIG_CLS_U32_PERF is not set
# CONFIG_CLS_U32_MARK is not setCONFIG_NET_CLS_RSVP=m
# CONFIG_NET_CLS_RSVP6 is not setCONFIG_NET_CLS_FLOW=mCONFIG_NET_CLS_CGROUP=mCONFIG_NET_CLS_BPF=m
# CONFIG_NET_CLS_FLOWER is not set
# CONFIG_NET_CLS_MATCHALL is not set
# CONFIG_NET_EMATCH is not set
# CONFIG_NET_CLS_ACT is not setCONFIG_NET_SCH_FIFO=yCONFIG_DCB=y
# CONFIG_DNS_RESOLVER is not set
# CONFIG_BATMAN_ADV is not setCONFIG_OPENVSWITCH=y
# CONFIG_VSOCKETS is not setCONFIG_NETLINK_DIAG=mCONFIG_MPLS=yCONFIG_NET_MPLS_GSO=yCONFIG_NET_NSH=yCONFIG_HSR=yCONFIG_NET_SWITCHDEV=y
# CONFIG_NET_L3_MASTER_DEV is not setCONFIG_QRTR=y
# CONFIG_QRTR_SMD is not set
# CONFIG_QRTR_TUN is not setCONFIG_NET_NCSI=y
# CONFIG_NCSI_OEM_CMD_GET_MAC is not set
# CONFIG_NCSI_OEM_CMD_KEEP_PHY is not setCONFIG_CGROUP_NET_PRIO=yCONFIG_CGROUP_NET_CLASSID=yCONFIG_NET_RX_BUSY_POLL=yCONFIG_BQL=yCONFIG_BPF_STREAM_PARSER=y
#
# Network testing
#
# end of Network testing # end of Networking options
CONFIG_HAMRADIO=y
#
# Packet Radio protocols
#CONFIG_AX25=mCONFIG_AX25_DAMA_SLAVE=yCONFIG_NETROM=m
# CONFIG_ROSE is not set
#
# AX.25 network device drivers
#CONFIG_MKISS=mCONFIG_6PACK=m
# CONFIG_BPQETHER is not set
# CONFIG_BAYCOM_SER_FDX is not setCONFIG_BAYCOM_SER_HDX=mCONFIG_YAM=m
# end of AX.25 network device drivers
CONFIG_CAN=mCONFIG_CAN_RAW=mCONFIG_CAN_BCM=mCONFIG_CAN_GW=m
# CONFIG_CAN_J1939 is not set
# CONFIG_CAN_ISOTP is not setCONFIG_BT=y
# CONFIG_BT_BREDR is not setCONFIG_BT_LE=y
# CONFIG_BT_6LOWPAN is not set
# CONFIG_BT_LEDS is not setCONFIG_BT_MSFTEXT=yCONFIG_BT_AOSPEXT=yCONFIG_BT_DEBUGFS=y
# CONFIG_BT_SELFTEST is not set
# CONFIG_BT_FEATURE_DEBUG is not set
#
# Bluetooth device drivers
#CONFIG_BT_INTEL=mCONFIG_BT_BCM=mCONFIG_BT_QCA=mCONFIG_BT_MTK=yCONFIG_BT_HCIBTUSB=mCONFIG_BT_HCIBTUSB_AUTOSUSPEND=y
# CONFIG_BT_HCIBTUSB_BCM is not setCONFIG_BT_HCIBTUSB_MTK=y
# CONFIG_BT_HCIBTUSB_RTL is not set
# CONFIG_BT_HCIBTSDIO is not setCONFIG_BT_HCIUART=mCONFIG_BT_HCIUART_SERDEV=yCONFIG_BT_HCIUART_H4=yCONFIG_BT_HCIUART_BCSP=y
# CONFIG_BT_HCIUART_ATH3K is not set
# CONFIG_BT_HCIUART_LL is not setCONFIG_BT_HCIUART_3WIRE=y
# CONFIG_BT_HCIUART_INTEL is not setCONFIG_BT_HCIUART_BCM=yCONFIG_BT_HCIUART_QCA=y
# CONFIG_BT_HCIUART_AG6XX is not set
# CONFIG_BT_HCIUART_MRVL is not setCONFIG_BT_HCIBCM203X=y
# CONFIG_BT_HCIBPA10X is not setCONFIG_BT_HCIBFUSB=m
# CONFIG_BT_HCIVHCI is not setCONFIG_BT_MRVL=y
# CONFIG_BT_MRVL_SDIO is not set
# CONFIG_BT_ATH3K is not setCONFIG_BT_MTKSDIO=yCONFIG_BT_MTKUART=m
# CONFIG_BT_QCOMSMD is not setCONFIG_BT_VIRTIO=m
# end of Bluetooth device drivers
CONFIG_AF_RXRPC=yCONFIG_AF_RXRPC_IPV6=yCONFIG_AF_RXRPC_INJECT_LOSS=yCONFIG_AF_RXRPC_DEBUG=y
# CONFIG_RXKAD is not set
# CONFIG_AF_KCM is not setCONFIG_STREAM_PARSER=y
# CONFIG_MCTP is not setCONFIG_WIRELESS=yCONFIG_CFG80211=y
# CONFIG_NL80211_TESTMODE is not setCONFIG_CFG80211_DEVELOPER_WARNINGS=y
# CONFIG_CFG80211_CERTIFICATION_ONUS is not setCONFIG_CFG80211_REQUIRE_SIGNED_REGDB=yCONFIG_CFG80211_USE_KERNEL_REGDB_KEYS=yCONFIG_CFG80211_DEFAULT_PS=y
# CONFIG_CFG80211_DEBUGFS is not set
# CONFIG_CFG80211_CRDA_SUPPORT is not set
# CONFIG_CFG80211_WEXT is not set
# CONFIG_MAC80211 is not setCONFIG_MAC80211_STA_HASH_MAX_SIZE=0
# CONFIG_RFKILL is not setCONFIG_NET_9P=y
# CONFIG_NET_9P_FD is not set
# CONFIG_NET_9P_VIRTIO is not set
# CONFIG_NET_9P_RDMA is not setCONFIG_NET_9P_DEBUG=yCONFIG_CAIF=mCONFIG_CAIF_DEBUG=yCONFIG_CAIF_NETDEV=mCONFIG_CAIF_USB=mCONFIG_CEPH_LIB=mCONFIG_CEPH_LIB_PRETTYDEBUG=y
# CONFIG_CEPH_LIB_USE_DNS_RESOLVER is not setCONFIG_NFC=y
# CONFIG_NFC_DIGITAL is not setCONFIG_NFC_NCI=m
# CONFIG_NFC_NCI_SPI is not setCONFIG_NFC_NCI_UART=mCONFIG_NFC_HCI=mCONFIG_NFC_SHDLC=y
#
# Near Field Communication (NFC) devices
#CONFIG_NFC_VIRTUAL_NCI=m
# CONFIG_NFC_FDP is not setCONFIG_NFC_PN544=mCONFIG_NFC_PN544_I2C=mCONFIG_NFC_PN533=mCONFIG_NFC_PN533_USB=m
# CONFIG_NFC_PN533_I2C is not setCONFIG_NFC_PN532_UART=mCONFIG_NFC_MICROREAD=mCONFIG_NFC_MICROREAD_I2C=mCONFIG_NFC_MRVL=m
# CONFIG_NFC_MRVL_USB is not setCONFIG_NFC_MRVL_UART=mCONFIG_NFC_MRVL_I2C=mCONFIG_NFC_ST21NFCA=mCONFIG_NFC_ST21NFCA_I2C=mCONFIG_NFC_ST_NCI=m
# CONFIG_NFC_ST_NCI_I2C is not setCONFIG_NFC_ST_NCI_SPI=mCONFIG_NFC_NXP_NCI=mCONFIG_NFC_NXP_NCI_I2C=mCONFIG_NFC_S3FWRN5=mCONFIG_NFC_S3FWRN5_I2C=mCONFIG_NFC_S3FWRN82_UART=m
# end of Near Field Communication (NFC) devices
CONFIG_PSAMPLE=mCONFIG_NET_IFE=yCONFIG_LWTUNNEL=yCONFIG_LWTUNNEL_BPF=yCONFIG_DST_CACHE=yCONFIG_GRO_CELLS=yCONFIG_NET_SELFTESTS=yCONFIG_NET_SOCK_MSG=yCONFIG_NET_DEVLINK=yCONFIG_PAGE_POOL=yCONFIG_PAGE_POOL_STATS=y
# CONFIG_FAILOVER is not set
# CONFIG_ETHTOOL_NETLINK is not set
#
# Device Drivers
#
# CONFIG_PCCARD is not set
#
# Generic Driver Options
#CONFIG_AUXILIARY_BUS=y
# CONFIG_UEVENT_HELPER is not set
# CONFIG_DEVTMPFS is not setCONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
#
# Firmware loader
#CONFIG_FW_LOADER=y CONFIG_FW_LOADER_PAGED_BUF=y CONFIG_FW_LOADER_SYSFS=y CONFIG_EXTRA_FIRMWARE="" CONFIG_FW_LOADER_USER_HELPER=y
# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set # CONFIG_FW_LOADER_COMPRESS is not set CONFIG_FW_UPLOAD=y
# end of Firmware loader
CONFIG_WANT_DEV_COREDUMP=yCONFIG_ALLOW_DEV_COREDUMP=yCONFIG_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not setCONFIG_DEBUG_DEVRES=y
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
# CONFIG_TEST_ASYNC_DRIVER_PROBE is not setCONFIG_GENERIC_CPU_DEVICES=yCONFIG_SOC_BUS=yCONFIG_REGMAP=yCONFIG_REGMAP_I2C=yCONFIG_REGMAP_SLIMBUS=mCONFIG_REGMAP_SPI=yCONFIG_REGMAP_W1=mCONFIG_REGMAP_MMIO=yCONFIG_REGMAP_IRQ=yCONFIG_REGMAP_SCCB=mCONFIG_REGMAP_SPI_AVMM=mCONFIG_DMA_SHARED_BUFFER=y
# CONFIG_DMA_FENCE_TRACE is not set
# end of Generic Driver Options
#
# Bus devices
#CONFIG_ARM_INTEGRATOR_LM=y
# CONFIG_BT1_APB is not set
# CONFIG_BT1_AXI is not set
# CONFIG_INTEL_IXP4XX_EB is not setCONFIG_QCOM_EBI2=y
# CONFIG_MHI_BUS is not set
# CONFIG_MHI_BUS_EP is not set
# end of Bus devices
CONFIG_CONNECTOR=yCONFIG_PROC_EVENTS=y
#
# Firmware Drivers
#
#
# ARM System Control and Management Interface Protocol #CONFIG_ARM_SCMI_PROTOCOL=y CONFIG_ARM_SCMI_HAVE_TRANSPORT=y CONFIG_ARM_SCMI_HAVE_SHMEM=y CONFIG_ARM_SCMI_TRANSPORT_MAILBOX=y
# CONFIG_ARM_SCMI_TRANSPORT_VIRTIO is not set CONFIG_ARM_SCMI_POWER_DOMAIN=m CONFIG_ARM_SCMI_POWER_CONTROL=y
# end of ARM System Control and Management Interface Protocol
CONFIG_ARM_SCPI_PROTOCOL=y CONFIG_ARM_SCPI_POWER_DOMAIN=m CONFIG_FIRMWARE_MEMMAP=yCONFIG_QCOM_SCM=y
# CONFIG_QCOM_SCM_DOWNLOAD_MODE_DEFAULT is not set # CONFIG_BCM47XX_NVRAM is not set
# CONFIG_TEE_BNXT_FW is not set CONFIG_GOOGLE_FIRMWARE=yCONFIG_IMX_DSP=mCONFIG_IMX_SCU=yCONFIG_IMX_SCU_PD=y
#
# Tegra firmware driver
#
# end of Tegra firmware driver # end of Firmware Drivers
# CONFIG_GNSS is not set
# CONFIG_MTD is not set
# CONFIG_MTD_NAND_ECC_MXIC is not set
# CONFIG_OF is not set
# CONFIG_PARPORT is not set
#
# NVME Support
#
# end of NVME Support
#
# Misc devices
#CONFIG_SENSORS_LIS3LV02D=y
# CONFIG_AD525X_DPOT is not setCONFIG_DUMMY_IRQ=mCONFIG_ICS932S401=m
# CONFIG_ATMEL_SSC is not setCONFIG_ENCLOSURE_SERVICES=mCONFIG_GEHC_ACHC=mCONFIG_QCOM_COINCELL=m
# CONFIG_QCOM_FASTRPC is not setCONFIG_APDS9802ALS=m
# CONFIG_ISL29003 is not setCONFIG_ISL29020=mCONFIG_SENSORS_TSL2550=mCONFIG_SENSORS_BH1770=yCONFIG_SENSORS_APDS990X=m
# CONFIG_HMC6352 is not setCONFIG_DS1682=yCONFIG_LATTICE_ECP3_CONFIG=y
# CONFIG_SRAM is not setCONFIG_XILINX_SDFEC=mCONFIG_MISC_RTSX=yCONFIG_HISI_HIKEY_USB=mCONFIG_C2PORT=m
#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_AT25 is not set
# CONFIG_EEPROM_LEGACY is not setCONFIG_EEPROM_MAX6875=yCONFIG_EEPROM_93CX6=mCONFIG_EEPROM_93XX46=m
# CONFIG_EEPROM_IDT_89HPESX is not setCONFIG_EEPROM_EE1004=m
# end of EEPROM support
#
# Texas Instruments shared transport line discipline #CONFIG_TI_ST=m
# end of Texas Instruments shared transport line discipline
# CONFIG_SENSORS_LIS3_SPI is not setCONFIG_SENSORS_LIS3_I2C=y
# CONFIG_ALTERA_STAPL is not set
# CONFIG_ECHO is not setCONFIG_MISC_RTSX_USB=yCONFIG_PVPANIC=y
# end of Misc devices
#
# SCSI device support
#
# end of SCSI device support
#
# IEEE 1394 (FireWire) support
#CONFIG_FIREWIRE=mCONFIG_FIREWIRE_NET=m
# end of IEEE 1394 (FireWire) support
CONFIG_NETDEVICES=yCONFIG_MII=y
# CONFIG_NET_CORE is not setCONFIG_ATM_DRIVERS=yCONFIG_ATM_DUMMY=m
# CONFIG_ATM_TCP is not set
# CONFIG_CAIF_DRIVERS is not setCONFIG_ETHERNET=yCONFIG_MDIO=yCONFIG_NET_VENDOR_ACTIONS=y
# CONFIG_OWL_EMAC is not set
# CONFIG_NET_VENDOR_ALACRITECH is not set
# CONFIG_ALTERA_TSE is not set
# CONFIG_NET_VENDOR_AMAZON is not setCONFIG_NET_XGENE=y
# CONFIG_NET_XGENE_V2 is not setCONFIG_NET_VENDOR_AQUANTIA=y
# CONFIG_NET_VENDOR_ARC is not setCONFIG_NET_VENDOR_ASIX=y
# CONFIG_SPI_AX88796C is not setCONFIG_NET_VENDOR_BROADCOM=yCONFIG_B44=yCONFIG_BCM4908_ENET=yCONFIG_BCMGENET=yCONFIG_BGMAC=yCONFIG_BGMAC_PLATFORM=yCONFIG_SYSTEMPORT=y
# CONFIG_NET_VENDOR_CADENCE is not setCONFIG_NET_CALXEDA_XGMAC=mCONFIG_NET_VENDOR_CAVIUM=y
# CONFIG_NET_VENDOR_CIRRUS is not set
# CONFIG_NET_VENDOR_CORTINA is not setCONFIG_NET_VENDOR_DAVICOM=yCONFIG_DM9000=y
# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not setCONFIG_DM9051=y
# CONFIG_DNET is not set
# CONFIG_NET_VENDOR_ENGLEDER is not setCONFIG_NET_VENDOR_EZCHIP=yCONFIG_NET_VENDOR_FARADAY=yCONFIG_FTMAC100=y
# CONFIG_FTGMAC100 is not set
# CONFIG_NET_VENDOR_FREESCALE is not setCONFIG_NET_VENDOR_FUNGIBLE=y
# CONFIG_NET_VENDOR_GOOGLE is not setCONFIG_NET_VENDOR_HUAWEI=yCONFIG_NET_VENDOR_I825XX=yCONFIG_NET_VENDOR_INTEL=yCONFIG_NET_VENDOR_WANGXUN=y
# CONFIG_KORINA is not setCONFIG_NET_VENDOR_ADI=yCONFIG_ADIN1110=m
# CONFIG_NET_VENDOR_LITEX is not setCONFIG_NET_VENDOR_MARVELL=yCONFIG_MV643XX_ETH=mCONFIG_MVMDIO=y
# CONFIG_MVNETA_BM_ENABLE is not setCONFIG_MVNETA=mCONFIG_MVPP2=y
# CONFIG_PXA168_ETH is not setCONFIG_PRESTERA=mCONFIG_NET_VENDOR_MEDIATEK=y
# CONFIG_NET_MEDIATEK_SOC is not setCONFIG_NET_MEDIATEK_STAR_EMAC=yCONFIG_NET_VENDOR_MELLANOX=y
# CONFIG_MLXSW_CORE is not setCONFIG_MLXFW=mCONFIG_MLXBF_GIGE=y
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_MICROCHIP is not set
# CONFIG_NET_VENDOR_MICROSEMI is not set
# CONFIG_NET_VENDOR_MICROSOFT is not setCONFIG_NET_VENDOR_NI=yCONFIG_NI_XGE_MANAGEMENT_ENET=yCONFIG_NET_VENDOR_NATSEMI=yCONFIG_NET_VENDOR_NETRONOME=y
# CONFIG_NET_VENDOR_8390 is not set
# CONFIG_LPC_ENET is not setCONFIG_ETHOC=y
# CONFIG_NET_VENDOR_PENSANDO is not setCONFIG_NET_VENDOR_QUALCOMM=yCONFIG_QCOM_EMAC=mCONFIG_RMNET=m
# CONFIG_NET_VENDOR_RENESAS is not set
# CONFIG_NET_VENDOR_ROCKER is not set
# CONFIG_NET_VENDOR_SAMSUNG is not setCONFIG_NET_VENDOR_SEEQ=yCONFIG_NET_VENDOR_SOLARFLARE=yCONFIG_NET_VENDOR_SMSC=yCONFIG_SMC91X=mCONFIG_SMSC911X=mCONFIG_NET_VENDOR_SOCIONEXT=yCONFIG_NET_VENDOR_STMICRO=yCONFIG_STMMAC_ETH=mCONFIG_STMMAC_SELFTESTS=yCONFIG_STMMAC_PLATFORM=mCONFIG_DWMAC_GENERIC=m
# CONFIG_NET_VENDOR_SUNPLUS is not setCONFIG_NET_VENDOR_SYNOPSYS=yCONFIG_DWC_XLGMAC=yCONFIG_NET_VENDOR_VERTEXCOM=y
# CONFIG_MSE102X is not setCONFIG_NET_VENDOR_VIA=yCONFIG_NET_VENDOR_WIZNET=y
# CONFIG_WIZNET_W5100 is not setCONFIG_WIZNET_W5300=m
# CONFIG_WIZNET_BUS_DIRECT is not setCONFIG_WIZNET_BUS_INDIRECT=y
# CONFIG_WIZNET_BUS_ANY is not setCONFIG_NET_VENDOR_XILINX=yCONFIG_XILINX_EMACLITE=mCONFIG_XILINX_AXI_EMAC=mCONFIG_XILINX_LL_TEMAC=mCONFIG_PHYLINK=yCONFIG_PHYLIB=yCONFIG_SWPHY=yCONFIG_LED_TRIGGER_PHY=yCONFIG_FIXED_PHY=y
# CONFIG_SFP is not set
#
# MII PHY device drivers
#CONFIG_AMD_PHY=yCONFIG_MESON_GXL_PHY=m
# CONFIG_ADIN_PHY is not set
# CONFIG_ADIN1100_PHY is not setCONFIG_AQUANTIA_PHY=yCONFIG_AX88796B_PHY=m
# CONFIG_BROADCOM_PHY is not set
# CONFIG_BCM54140_PHY is not setCONFIG_BCM63XX_PHY=yCONFIG_BCM7XXX_PHY=yCONFIG_BCM84881_PHY=yCONFIG_BCM87XX_PHY=yCONFIG_BCM_NET_PHYLIB=yCONFIG_CICADA_PHY=m
# CONFIG_CORTINA_PHY is not setCONFIG_DAVICOM_PHY=yCONFIG_ICPLUS_PHY=m
# CONFIG_LXT_PHY is not set
# CONFIG_INTEL_XWAY_PHY is not set
# CONFIG_LSI_ET1011C_PHY is not setCONFIG_MARVELL_PHY=yCONFIG_MARVELL_10G_PHY=mCONFIG_MARVELL_88X2222_PHY=m
# CONFIG_MAXLINEAR_GPHY is not set
# CONFIG_MEDIATEK_GE_PHY is not set
# CONFIG_MICREL_PHY is not setCONFIG_MICROCHIP_PHY=y
# CONFIG_MICROCHIP_T1_PHY is not setCONFIG_MICROSEMI_PHY=m
# CONFIG_MOTORCOMM_PHY is not setCONFIG_NATIONAL_PHY=yCONFIG_NXP_C45_TJA11XX_PHY=y
# CONFIG_NXP_TJA11XX_PHY is not setCONFIG_AT803X_PHY=yCONFIG_QSEMI_PHY=y
# CONFIG_REALTEK_PHY is not setCONFIG_RENESAS_PHY=yCONFIG_ROCKCHIP_PHY=mCONFIG_SMSC_PHY=y
# CONFIG_STE10XP is not set
# CONFIG_TERANETICS_PHY is not set
# CONFIG_DP83822_PHY is not setCONFIG_DP83TC811_PHY=mCONFIG_DP83848_PHY=yCONFIG_DP83867_PHY=m
# CONFIG_DP83869_PHY is not setCONFIG_DP83TD510_PHY=yCONFIG_VITESSE_PHY=yCONFIG_XILINX_GMII2RGMII=mCONFIG_MICREL_KS8995MA=m
# CONFIG_PSE_CONTROLLER is not setCONFIG_CAN_DEV=m
# CONFIG_CAN_VCAN is not setCONFIG_CAN_VXCAN=mCONFIG_CAN_NETLINK=y
# CONFIG_CAN_CALC_BITTIMING is not setCONFIG_CAN_RX_OFFLOAD=yCONFIG_CAN_AT91=m
# CONFIG_CAN_CAN327 is not set
# CONFIG_CAN_FLEXCAN is not set
# CONFIG_CAN_SLCAN is not setCONFIG_CAN_SUN4I=mCONFIG_CAN_C_CAN=mCONFIG_CAN_C_CAN_PLATFORM=mCONFIG_CAN_CC770=mCONFIG_CAN_CC770_ISA=mCONFIG_CAN_CC770_PLATFORM=m
# CONFIG_CAN_CTUCANFD is not set
# CONFIG_CAN_CTUCANFD_PLATFORM is not setCONFIG_CAN_IFI_CANFD=m
# CONFIG_CAN_M_CAN is not setCONFIG_CAN_RCAR=mCONFIG_CAN_RCAR_CANFD=mCONFIG_CAN_SJA1000=mCONFIG_CAN_SJA1000_ISA=m
# CONFIG_CAN_SJA1000_PLATFORM is not setCONFIG_CAN_SOFTING=m
#
# CAN SPI interfaces
#
# CONFIG_CAN_HI311X is not setCONFIG_CAN_MCP251X=mCONFIG_CAN_MCP251XFD=m
# CONFIG_CAN_MCP251XFD_SANITY is not set
# end of CAN SPI interfaces
#
# CAN USB interfaces
#
# CONFIG_CAN_8DEV_USB is not setCONFIG_CAN_EMS_USB=m
# CONFIG_CAN_ESD_USB is not setCONFIG_CAN_ETAS_ES58X=m
# CONFIG_CAN_GS_USB is not setCONFIG_CAN_KVASER_USB=mCONFIG_CAN_MCBA_USB=m
# CONFIG_CAN_PEAK_USB is not setCONFIG_CAN_UCAN=m
# end of CAN USB interfaces
# CONFIG_CAN_DEBUG_DEVICES is not setCONFIG_MDIO_DEVICE=yCONFIG_MDIO_BUS=yCONFIG_FWNODE_MDIO=yCONFIG_MDIO_DEVRES=yCONFIG_MDIO_SUN4I=mCONFIG_MDIO_XGENE=yCONFIG_MDIO_BITBANG=mCONFIG_MDIO_BCM_UNIMAC=yCONFIG_MDIO_CAVIUM=m
# CONFIG_MDIO_GPIO is not set
# CONFIG_MDIO_MVUSB is not set
# CONFIG_MDIO_MSCC_MIIM is not set
# CONFIG_MDIO_MOXART is not setCONFIG_MDIO_OCTEON=m
#
# MDIO Multiplexers
#
#
# PCS device drivers
#CONFIG_PCS_XPCS=m
# end of PCS device drivers
CONFIG_PPP=yCONFIG_PPP_BSDCOMP=yCONFIG_PPP_DEFLATE=yCONFIG_PPP_FILTER=yCONFIG_PPP_MPPE=yCONFIG_PPP_MULTILINK=y
# CONFIG_PPPOATM is not set
# CONFIG_PPPOE is not set
# CONFIG_PPTP is not setCONFIG_PPP_ASYNC=y
# CONFIG_PPP_SYNC_TTY is not setCONFIG_SLIP=mCONFIG_SLHC=yCONFIG_SLIP_COMPRESSED=yCONFIG_SLIP_SMART=yCONFIG_SLIP_MODE_SLIP6=yCONFIG_USB_NET_DRIVERS=yCONFIG_USB_CATC=m
# CONFIG_USB_KAWETH is not setCONFIG_USB_PEGASUS=yCONFIG_USB_RTL8150=mCONFIG_USB_RTL8152=mCONFIG_USB_LAN78XX=yCONFIG_USB_USBNET=yCONFIG_USB_NET_AX8817X=mCONFIG_USB_NET_AX88179_178A=mCONFIG_USB_NET_CDCETHER=yCONFIG_USB_NET_CDC_EEM=mCONFIG_USB_NET_CDC_NCM=yCONFIG_USB_NET_HUAWEI_CDC_NCM=mCONFIG_USB_NET_CDC_MBIM=yCONFIG_USB_NET_DM9601=y
# CONFIG_USB_NET_SR9700 is not setCONFIG_USB_NET_SR9800=mCONFIG_USB_NET_SMSC75XX=yCONFIG_USB_NET_SMSC95XX=yCONFIG_USB_NET_GL620A=yCONFIG_USB_NET_NET1080=mCONFIG_USB_NET_PLUSB=y
# CONFIG_USB_NET_MCS7830 is not set
# CONFIG_USB_NET_RNDIS_HOST is not setCONFIG_USB_NET_CDC_SUBSET_ENABLE=mCONFIG_USB_NET_CDC_SUBSET=mCONFIG_USB_ALI_M5632=yCONFIG_USB_AN2720=y
# CONFIG_USB_BELKIN is not set
# CONFIG_USB_ARMLINUX is not set
# CONFIG_USB_EPSON2888 is not set
# CONFIG_USB_KC2190 is not set
# CONFIG_USB_NET_ZAURUS is not setCONFIG_USB_NET_CX82310_ETH=mCONFIG_USB_NET_KALMIA=mCONFIG_USB_NET_QMI_WWAN=m
# CONFIG_USB_NET_INT51X1 is not setCONFIG_USB_CDC_PHONET=mCONFIG_USB_IPHETH=yCONFIG_USB_SIERRA_NET=yCONFIG_USB_VL600=mCONFIG_USB_NET_CH9200=mCONFIG_USB_NET_AQC111=yCONFIG_USB_RTL8153_ECM=mCONFIG_WLAN=y
# CONFIG_WLAN_VENDOR_ADMTEK is not set
# CONFIG_WLAN_VENDOR_ATH is not setCONFIG_WLAN_VENDOR_ATMEL=y
# CONFIG_WLAN_VENDOR_BROADCOM is not setCONFIG_WLAN_VENDOR_CISCO=y
# CONFIG_WLAN_VENDOR_INTEL is not setCONFIG_WLAN_VENDOR_INTERSIL=y
# CONFIG_HOSTAP is not set
# CONFIG_WLAN_VENDOR_MARVELL is not setCONFIG_WLAN_VENDOR_MEDIATEK=yCONFIG_WLAN_VENDOR_MICROCHIP=yCONFIG_WILC1000=yCONFIG_WILC1000_SDIO=yCONFIG_WILC1000_SPI=yCONFIG_WILC1000_HW_OOB_INTR=y
# CONFIG_WLAN_VENDOR_PURELIFI is not set
# CONFIG_WLAN_VENDOR_RALINK is not setCONFIG_WLAN_VENDOR_REALTEK=y
# CONFIG_WLAN_VENDOR_RSI is not setCONFIG_WLAN_VENDOR_SILABS=y
# CONFIG_WLAN_VENDOR_ST is not setCONFIG_WLAN_VENDOR_TI=y
# CONFIG_WLAN_VENDOR_ZYDAS is not set
# CONFIG_WLAN_VENDOR_QUANTENNA is not set
# CONFIG_USB_NET_RNDIS_WLAN is not setCONFIG_VIRT_WIFI=mCONFIG_WAN=y
# CONFIG_HDLC is not setCONFIG_SLIC_DS26522=yCONFIG_LAPBETHER=m
# CONFIG_IEEE802154_DRIVERS is not set
#
# Wireless WAN
#CONFIG_WWAN=mCONFIG_WWAN_DEBUGFS=y
# CONFIG_WWAN_HWSIM is not set
# CONFIG_QCOM_BAM_DMUX is not set
# CONFIG_RPMSG_WWAN_CTRL is not set
# end of Wireless WAN
CONFIG_NETDEVSIM=m
# CONFIG_NET_FAILOVER is not setCONFIG_ISDN=yCONFIG_ISDN_CAPI=yCONFIG_MISDN=mCONFIG_MISDN_DSP=m
# CONFIG_MISDN_L1OIP is not set
#
# mISDN hardware drivers
#
# CONFIG_MISDN_HFCUSB is not set
#
# Input device support
#CONFIG_INPUT=y
# CONFIG_INPUT_LEDS is not setCONFIG_INPUT_FF_MEMLESS=yCONFIG_INPUT_SPARSEKMAP=m
# CONFIG_INPUT_MATRIXKMAP is not setCONFIG_INPUT_VIVALDIFMAP=y
#
# Userland interfaces
#CONFIG_INPUT_MOUSEDEV=m
# CONFIG_INPUT_MOUSEDEV_PSAUX is not setCONFIG_INPUT_MOUSEDEV_SCREEN_X=1024CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not setCONFIG_INPUT_EVDEV=mCONFIG_INPUT_EVBUG=y
#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not setCONFIG_INPUT_MOUSE=yCONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_PS2_ALPS is not setCONFIG_MOUSE_PS2_BYD=yCONFIG_MOUSE_PS2_LOGIPS2PP=yCONFIG_MOUSE_PS2_SYNAPTICS=yCONFIG_MOUSE_PS2_SYNAPTICS_SMBUS=yCONFIG_MOUSE_PS2_CYPRESS=y
# CONFIG_MOUSE_PS2_TRACKPOINT is not set
# CONFIG_MOUSE_PS2_ELANTECH is not setCONFIG_MOUSE_PS2_SENTELIC=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_PS2_FOCALTECH is not setCONFIG_MOUSE_PS2_SMBUS=yCONFIG_MOUSE_SERIAL=mCONFIG_MOUSE_APPLETOUCH=y
# CONFIG_MOUSE_BCM5974 is not setCONFIG_MOUSE_CYAPA=mCONFIG_MOUSE_ELAN_I2C=yCONFIG_MOUSE_ELAN_I2C_I2C=y
# CONFIG_MOUSE_ELAN_I2C_SMBUS is not set
# CONFIG_MOUSE_VSXXXAA is not setCONFIG_MOUSE_GPIO=yCONFIG_MOUSE_SYNAPTICS_I2C=mCONFIG_MOUSE_SYNAPTICS_USB=yCONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not setCONFIG_JOYSTICK_A3D=yCONFIG_JOYSTICK_ADI=m
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
# CONFIG_JOYSTICK_GRIP is not set
# CONFIG_JOYSTICK_GRIP_MP is not setCONFIG_JOYSTICK_GUILLEMOT=mCONFIG_JOYSTICK_INTERACT=mCONFIG_JOYSTICK_SIDEWINDER=yCONFIG_JOYSTICK_TMDC=mCONFIG_JOYSTICK_IFORCE=mCONFIG_JOYSTICK_IFORCE_USB=mCONFIG_JOYSTICK_IFORCE_232=mCONFIG_JOYSTICK_WARRIOR=yCONFIG_JOYSTICK_MAGELLAN=y
# CONFIG_JOYSTICK_SPACEORB is not setCONFIG_JOYSTICK_SPACEBALL=y
# CONFIG_JOYSTICK_STINGER is not setCONFIG_JOYSTICK_TWIDJOY=yCONFIG_JOYSTICK_ZHENHUA=m
# CONFIG_JOYSTICK_AS5011 is not setCONFIG_JOYSTICK_JOYDUMP=mCONFIG_JOYSTICK_XPAD=yCONFIG_JOYSTICK_XPAD_FF=y
# CONFIG_JOYSTICK_XPAD_LEDS is not setCONFIG_JOYSTICK_PSXPAD_SPI=m
# CONFIG_JOYSTICK_PSXPAD_SPI_FF is not set
# CONFIG_JOYSTICK_PXRC is not setCONFIG_JOYSTICK_QWIIC=yCONFIG_JOYSTICK_FSIA6B=m
# CONFIG_JOYSTICK_SENSEHAT is not set
# CONFIG_INPUT_TABLET is not setCONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_ADS7846 is not setCONFIG_TOUCHSCREEN_AD7877=mCONFIG_TOUCHSCREEN_AD7879=yCONFIG_TOUCHSCREEN_AD7879_I2C=mCONFIG_TOUCHSCREEN_AD7879_SPI=mCONFIG_TOUCHSCREEN_ATMEL_MXT=m
# CONFIG_TOUCHSCREEN_ATMEL_MXT_T37 is not set
# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not setCONFIG_TOUCHSCREEN_BU21013=mCONFIG_TOUCHSCREEN_BU21029=yCONFIG_TOUCHSCREEN_CY8CTMA140=mCONFIG_TOUCHSCREEN_CY8CTMG110=yCONFIG_TOUCHSCREEN_CYTTSP_CORE=mCONFIG_TOUCHSCREEN_CYTTSP_I2C=m
# CONFIG_TOUCHSCREEN_CYTTSP_SPI is not set
# CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not setCONFIG_TOUCHSCREEN_DA9052=mCONFIG_TOUCHSCREEN_DYNAPRO=yCONFIG_TOUCHSCREEN_HAMPSHIRE=mCONFIG_TOUCHSCREEN_EETI=yCONFIG_TOUCHSCREEN_EGALAX_SERIAL=yCONFIG_TOUCHSCREEN_EXC3000=mCONFIG_TOUCHSCREEN_FUJITSU=yCONFIG_TOUCHSCREEN_GOODIX=m
# CONFIG_TOUCHSCREEN_HIDEEP is not setCONFIG_TOUCHSCREEN_HYCON_HY46XX=yCONFIG_TOUCHSCREEN_ILI210X=yCONFIG_TOUCHSCREEN_ILITEK=mCONFIG_TOUCHSCREEN_IPROC=yCONFIG_TOUCHSCREEN_S6SY761=yCONFIG_TOUCHSCREEN_GUNZE=yCONFIG_TOUCHSCREEN_EKTF2127=y
# CONFIG_TOUCHSCREEN_ELAN is not setCONFIG_TOUCHSCREEN_ELO=m
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not setCONFIG_TOUCHSCREEN_WACOM_I2C=yCONFIG_TOUCHSCREEN_MAX11801=yCONFIG_TOUCHSCREEN_MCS5000=m
# CONFIG_TOUCHSCREEN_MMS114 is not set
# CONFIG_TOUCHSCREEN_MELFAS_MIP4 is not setCONFIG_TOUCHSCREEN_MSG2638=y
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_IMAGIS is not setCONFIG_TOUCHSCREEN_IMX6UL_TSC=yCONFIG_TOUCHSCREEN_INEXIO=m
# CONFIG_TOUCHSCREEN_MK712 is not setCONFIG_TOUCHSCREEN_PENMOUNT=y
# CONFIG_TOUCHSCREEN_EDT_FT5X06 is not setCONFIG_TOUCHSCREEN_RASPBERRYPI_FW=m
# CONFIG_TOUCHSCREEN_MIGOR is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not setCONFIG_TOUCHSCREEN_TOUCHWIN=mCONFIG_TOUCHSCREEN_TI_AM335X_TSC=mCONFIG_TOUCHSCREEN_PIXCIR=mCONFIG_TOUCHSCREEN_WDT87XX_I2C=m
# CONFIG_TOUCHSCREEN_WM831X is not setCONFIG_TOUCHSCREEN_USB_COMPOSITE=y
# CONFIG_TOUCHSCREEN_MX25 is not set
# CONFIG_TOUCHSCREEN_MC13783 is not setCONFIG_TOUCHSCREEN_USB_EGALAX=y
# CONFIG_TOUCHSCREEN_USB_PANJIT is not setCONFIG_TOUCHSCREEN_USB_3M=y
# CONFIG_TOUCHSCREEN_USB_ITM is not setCONFIG_TOUCHSCREEN_USB_ETURBO=yCONFIG_TOUCHSCREEN_USB_GUNZE=yCONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
# CONFIG_TOUCHSCREEN_USB_IRTOUCH is not setCONFIG_TOUCHSCREEN_USB_IDEALTEK=yCONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=yCONFIG_TOUCHSCREEN_USB_GOTOP=yCONFIG_TOUCHSCREEN_USB_JASTEC=yCONFIG_TOUCHSCREEN_USB_ELO=yCONFIG_TOUCHSCREEN_USB_E2I=yCONFIG_TOUCHSCREEN_USB_ZYTRONIC=y
# CONFIG_TOUCHSCREEN_USB_ETT_TC45USB is not setCONFIG_TOUCHSCREEN_USB_NEXIO=y
# CONFIG_TOUCHSCREEN_USB_EASYTOUCH is not setCONFIG_TOUCHSCREEN_TOUCHIT213=y
# CONFIG_TOUCHSCREEN_TSC_SERIO is not setCONFIG_TOUCHSCREEN_TSC200X_CORE=y
# CONFIG_TOUCHSCREEN_TSC2004 is not setCONFIG_TOUCHSCREEN_TSC2005=y
# CONFIG_TOUCHSCREEN_TSC2007 is not setCONFIG_TOUCHSCREEN_PCAP=yCONFIG_TOUCHSCREEN_RM_TS=m
# CONFIG_TOUCHSCREEN_SILEAD is not set
# CONFIG_TOUCHSCREEN_SIS_I2C is not setCONFIG_TOUCHSCREEN_ST1232=yCONFIG_TOUCHSCREEN_STMFTS=mCONFIG_TOUCHSCREEN_SUN4I=m
# CONFIG_TOUCHSCREEN_SUR40 is not setCONFIG_TOUCHSCREEN_SURFACE3_SPI=mCONFIG_TOUCHSCREEN_SX8654=yCONFIG_TOUCHSCREEN_TPS6507X=mCONFIG_TOUCHSCREEN_ZET6223=mCONFIG_TOUCHSCREEN_ZFORCE=yCONFIG_TOUCHSCREEN_ROHM_BU21023=yCONFIG_TOUCHSCREEN_IQS5XX=mCONFIG_TOUCHSCREEN_ZINITIX=yCONFIG_INPUT_MISC=yCONFIG_INPUT_AD714X=mCONFIG_INPUT_AD714X_I2C=mCONFIG_INPUT_AD714X_SPI=m
# CONFIG_INPUT_ARIEL_PWRBUTTON is not setCONFIG_INPUT_ATMEL_CAPTOUCH=yCONFIG_INPUT_BMA150=y
# CONFIG_INPUT_E3X0_BUTTON is not setCONFIG_INPUT_PM8XXX_VIBRATOR=mCONFIG_INPUT_PMIC8XXX_PWRKEY=mCONFIG_INPUT_MAX77693_HAPTIC=yCONFIG_INPUT_MAX8925_ONKEY=yCONFIG_INPUT_MAX8997_HAPTIC=yCONFIG_INPUT_MC13783_PWRBUTTON=m
# CONFIG_INPUT_MMA8450 is not setCONFIG_INPUT_GPIO_BEEPER=y
# CONFIG_INPUT_GPIO_DECODER is not setCONFIG_INPUT_GPIO_VIBRA=mCONFIG_INPUT_ATI_REMOTE2=y
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_KXTJ9 is not setCONFIG_INPUT_POWERMATE=yCONFIG_INPUT_YEALINK=m
# CONFIG_INPUT_CM109 is not setCONFIG_INPUT_REGULATOR_HAPTIC=yCONFIG_INPUT_RETU_PWRBUTTON=mCONFIG_INPUT_AXP20X_PEK=y
# CONFIG_INPUT_TWL4030_PWRBUTTON is not setCONFIG_INPUT_TWL4030_VIBRA=mCONFIG_INPUT_UINPUT=yCONFIG_INPUT_PCF8574=m
# CONFIG_INPUT_PWM_BEEPER is not set
# CONFIG_INPUT_PWM_VIBRA is not set
# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
# CONFIG_INPUT_DA7280_HAPTICS is not setCONFIG_INPUT_DA9052_ONKEY=m
# CONFIG_INPUT_WM831X_ON is not setCONFIG_INPUT_PCAP=mCONFIG_INPUT_ADXL34X=yCONFIG_INPUT_ADXL34X_I2C=m
# CONFIG_INPUT_ADXL34X_SPI is not set
# CONFIG_INPUT_IBM_PANEL is not set
# CONFIG_INPUT_IMS_PCU is not setCONFIG_INPUT_IQS269A=y
# CONFIG_INPUT_IQS626A is not setCONFIG_INPUT_IQS7222=m
# CONFIG_INPUT_CMA3000 is not setCONFIG_INPUT_DRV260X_HAPTICS=yCONFIG_INPUT_DRV2665_HAPTICS=mCONFIG_INPUT_DRV2667_HAPTICS=m
# CONFIG_INPUT_HISI_POWERKEY is not set
# CONFIG_INPUT_RAVE_SP_PWRBUTTON is not set
# CONFIG_INPUT_SC27XX_VIBRA is not set
# CONFIG_INPUT_RT5120_PWRKEY is not setCONFIG_RMI4_CORE=yCONFIG_RMI4_I2C=mCONFIG_RMI4_SPI=m
# CONFIG_RMI4_SMB is not setCONFIG_RMI4_F03=yCONFIG_RMI4_F03_SERIO=yCONFIG_RMI4_2D_SENSOR=yCONFIG_RMI4_F11=yCONFIG_RMI4_F12=yCONFIG_RMI4_F30=yCONFIG_RMI4_F34=yCONFIG_RMI4_F3A=y
# CONFIG_RMI4_F54 is not setCONFIG_RMI4_F55=y
#
# Hardware I/O ports
#CONFIG_SERIO=yCONFIG_SERIO_SERPORT=mCONFIG_SERIO_LIBPS2=yCONFIG_SERIO_RAW=mCONFIG_SERIO_ALTERA_PS2=mCONFIG_SERIO_PS2MULT=yCONFIG_SERIO_ARC_PS2=yCONFIG_SERIO_OLPC_APSP=yCONFIG_SERIO_SUN4I_PS2=yCONFIG_SERIO_GPIO_PS2=yCONFIG_USERIO=mCONFIG_GAMEPORT=y
# CONFIG_GAMEPORT_NS558 is not setCONFIG_GAMEPORT_L4=y
# end of Hardware I/O ports # end of Input device support
#
# Character devices
#CONFIG_TTY=yCONFIG_VT=y
# CONFIG_CONSOLE_TRANSLATIONS is not set
# CONFIG_VT_CONSOLE is not setCONFIG_HW_CONSOLE=yCONFIG_VT_HW_CONSOLE_BINDING=yCONFIG_UNIX98_PTYS=yCONFIG_LEGACY_PTYS=yCONFIG_LEGACY_PTY_COUNT=256
# CONFIG_LDISC_AUTOLOAD is not set
#
# Serial drivers
#CONFIG_SERIAL_EARLYCON=y CONFIG_SERIAL_8250=m
# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set # CONFIG_SERIAL_8250_16550A_VARIANTS is not set # CONFIG_SERIAL_8250_FINTEK is not set CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 CONFIG_SERIAL_8250_EXTENDED=y
# CONFIG_SERIAL_8250_MANY_PORTS is not set CONFIG_SERIAL_8250_SHARE_IRQ=y CONFIG_SERIAL_8250_DETECT_IRQ=y CONFIG_SERIAL_8250_RSA=y CONFIG_SERIAL_8250_DWLIB=y
# CONFIG_SERIAL_8250_BCM2835AUX is not set CONFIG_SERIAL_8250_DW=m CONFIG_SERIAL_8250_IOC3=m
# CONFIG_SERIAL_8250_RT288X is not set CONFIG_SERIAL_8250_OMAP=m CONFIG_SERIAL_8250_MT6577=m CONFIG_SERIAL_8250_UNIPHIER=m CONFIG_SERIAL_8250_PXA=m
# CONFIG_SERIAL_8250_TEGRA is not set CONFIG_SERIAL_8250_BCM7271=m
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_AMBA_PL010 is not set CONFIG_SERIAL_MESON=y
# CONFIG_SERIAL_MESON_CONSOLE is not set
# CONFIG_SERIAL_CLPS711X is not set CONFIG_SERIAL_SAMSUNG=y CONFIG_SERIAL_SAMSUNG_UARTS_4=y CONFIG_SERIAL_SAMSUNG_UARTS=4
# CONFIG_SERIAL_SAMSUNG_CONSOLE is not set CONFIG_SERIAL_TEGRA=mCONFIG_SERIAL_TEGRA_TCU=m
# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_MAX310X is not set CONFIG_SERIAL_IMX=y
# CONFIG_SERIAL_IMX_CONSOLE is not set CONFIG_SERIAL_UARTLITE=y
# CONFIG_SERIAL_UARTLITE_CONSOLE is not set CONFIG_SERIAL_UARTLITE_NR_UARTS=1
# CONFIG_SERIAL_SH_SCI is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=yCONFIG_SERIAL_MSM=m
# CONFIG_SERIAL_VT8500 is not set
# CONFIG_SERIAL_OMAP is not set CONFIG_SERIAL_LANTIQ=m
# CONFIG_SERIAL_SCCNXP is not set CONFIG_SERIAL_SC16IS7XX_CORE=m CONFIG_SERIAL_SC16IS7XX=m CONFIG_SERIAL_SC16IS7XX_I2C=y CONFIG_SERIAL_SC16IS7XX_SPI=y CONFIG_SERIAL_TIMBERDALE=m
# CONFIG_SERIAL_BCM63XX is not set CONFIG_SERIAL_ALTERA_JTAGUART=y CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE=y
# CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE_BYPASS is not set # CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_MXS_AUART is not set
# CONFIG_SERIAL_MPS2_UART is not set CONFIG_SERIAL_ARC=mCONFIG_SERIAL_ARC_NR_PORTS=1 CONFIG_SERIAL_FSL_LPUART=y
# CONFIG_SERIAL_FSL_LPUART_CONSOLE is not set CONFIG_SERIAL_FSL_LINFLEXUART=y
# CONFIG_SERIAL_FSL_LINFLEXUART_CONSOLE is not set # CONFIG_SERIAL_ST_ASC is not set
# CONFIG_SERIAL_STM32 is not set
# CONFIG_SERIAL_OWL is not set CONFIG_SERIAL_RDA=yCONFIG_SERIAL_RDA_CONSOLE=y CONFIG_SERIAL_LITEUART=m CONFIG_SERIAL_LITEUART_MAX_PORTS=1
# CONFIG_SERIAL_SUNPLUS is not set
# end of Serial drivers
CONFIG_SERIAL_MCTRL_GPIO=yCONFIG_SERIAL_NONSTANDARD=yCONFIG_N_HDLC=mCONFIG_GOLDFISH_TTY=yCONFIG_GOLDFISH_TTY_EARLY_CONSOLE=yCONFIG_N_GSM=mCONFIG_NULL_TTY=yCONFIG_HVC_DRIVER=y
# CONFIG_RPMSG_TTY is not setCONFIG_SERIAL_DEV_BUS=mCONFIG_TTY_PRINTK=yCONFIG_TTY_PRINTK_LEVEL=6CONFIG_VIRTIO_CONSOLE=mCONFIG_IPMI_HANDLER=m
# CONFIG_IPMI_PANIC_EVENT is not set
# CONFIG_IPMI_DEVICE_INTERFACE is not set
# CONFIG_IPMI_SI is not set
# CONFIG_IPMI_SSIF is not setCONFIG_IPMI_IPMB=mCONFIG_IPMI_WATCHDOG=mCONFIG_IPMI_POWEROFF=mCONFIG_IPMI_KCS_BMC=y
# CONFIG_ASPEED_KCS_IPMI_BMC is not setCONFIG_NPCM7XX_KCS_IPMI_BMC=yCONFIG_IPMI_KCS_BMC_CDEV_IPMI=y
# CONFIG_IPMI_KCS_BMC_SERIO is not setCONFIG_ASPEED_BT_IPMI_BMC=mCONFIG_IPMB_DEVICE_INTERFACE=y
# CONFIG_HW_RANDOM is not set
# CONFIG_DEVMEM is not setCONFIG_TCG_TPM=mCONFIG_TCG_TIS_CORE=mCONFIG_TCG_TIS_SPI=m
# CONFIG_TCG_TIS_SPI_CR50 is not setCONFIG_TCG_TIS_I2C=m
# CONFIG_TCG_TIS_SYNQUACER is not setCONFIG_TCG_TIS_I2C_CR50=m
# CONFIG_TCG_TIS_I2C_ATMEL is not setCONFIG_TCG_TIS_I2C_INFINEON=mCONFIG_TCG_TIS_I2C_NUVOTON=mCONFIG_TCG_ATMEL=mCONFIG_TCG_VTPM_PROXY=mCONFIG_TCG_TIS_ST33ZP24=m
# CONFIG_TCG_TIS_ST33ZP24_I2C is not setCONFIG_TCG_TIS_ST33ZP24_SPI=mCONFIG_XILLYBUS_CLASS=mCONFIG_XILLYUSB=m
# CONFIG_RANDOM_TRUST_CPU is not set
# CONFIG_RANDOM_TRUST_BOOTLOADER is not set
# end of Character devices
#
# I2C support
#CONFIG_I2C=yCONFIG_I2C_BOARDINFO=yCONFIG_I2C_COMPAT=y
# CONFIG_I2C_CHARDEV is not setCONFIG_I2C_MUX=y
#
# Multiplexer I2C Chip support
#
# CONFIG_I2C_MUX_GPIO is not setCONFIG_I2C_MUX_LTC4306=m
# CONFIG_I2C_MUX_PCA9541 is not set
# CONFIG_I2C_MUX_PCA954x is not setCONFIG_I2C_MUX_REG=y
# CONFIG_I2C_MUX_MLXCPLD is not set
# end of Multiplexer I2C Chip support
# CONFIG_I2C_HELPER_AUTO is not setCONFIG_I2C_SMBUS=y
#
# I2C Algorithms
#CONFIG_I2C_ALGOBIT=yCONFIG_I2C_ALGOPCF=mCONFIG_I2C_ALGOPCA=y
# end of I2C Algorithms
#
# I2C Hardware Bus support
#
# CONFIG_I2C_HIX5HD2 is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip) #CONFIG_I2C_ASPEED=mCONFIG_I2C_AT91=y
# CONFIG_I2C_AT91_SLAVE_EXPERIMENTAL is not set
# CONFIG_I2C_AXXIA is not set CONFIG_I2C_BCM_IPROC=m
# CONFIG_I2C_BCM_KONA is not set CONFIG_I2C_BRCMSTB=yCONFIG_I2C_CADENCE=yCONFIG_I2C_CBUS_GPIO=yCONFIG_I2C_DAVINCI=yCONFIG_I2C_DESIGNWARE_CORE=m
# CONFIG_I2C_DESIGNWARE_SLAVE is not set CONFIG_I2C_DESIGNWARE_PLATFORM=m
# CONFIG_I2C_DIGICOLOR is not set CONFIG_I2C_GPIO=yCONFIG_I2C_GPIO_FAULT_INJECTOR=y
# CONFIG_I2C_HIGHLANDER is not set
# CONFIG_I2C_HISI is not setCONFIG_I2C_IMG=m
# CONFIG_I2C_IMX is not set
# CONFIG_I2C_IMX_LPI2C is not set CONFIG_I2C_IOP3XX=y
# CONFIG_I2C_JZ4780 is not set
# CONFIG_I2C_KEMPLD is not setCONFIG_I2C_MT65XX=yCONFIG_I2C_MT7621=mCONFIG_I2C_MV64XXX=y
# CONFIG_I2C_MXS is not setCONFIG_I2C_NPCM=yCONFIG_I2C_OCORES=m
# CONFIG_I2C_OMAP is not set
# CONFIG_I2C_OWL is not setCONFIG_I2C_APPLE=yCONFIG_I2C_PCA_PLATFORM=yCONFIG_I2C_PNX=mCONFIG_I2C_PXA=yCONFIG_I2C_PXA_SLAVE=yCONFIG_I2C_QCOM_CCI=yCONFIG_I2C_QUP=mCONFIG_I2C_RIIC=m
# CONFIG_I2C_RZV2M is not setCONFIG_I2C_S3C2410=m
# CONFIG_I2C_SH_MOBILE is not set
# CONFIG_I2C_SIMTEC is not setCONFIG_I2C_ST=mCONFIG_I2C_STM32F4=yCONFIG_I2C_STM32F7=mCONFIG_I2C_SUN6I_P2WI=yCONFIG_I2C_SYNQUACER=yCONFIG_I2C_TEGRA_BPMP=mCONFIG_I2C_UNIPHIER=m
# CONFIG_I2C_UNIPHIER_F is not set
# CONFIG_I2C_VERSATILE is not setCONFIG_I2C_WMT=m
# CONFIG_I2C_XILINX is not setCONFIG_I2C_XLP9XX=mCONFIG_I2C_RCAR=m
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_DIOLAN_U2C is not set
# CONFIG_I2C_DLN2 is not setCONFIG_I2C_CP2615=m
# CONFIG_I2C_ROBOTFUZZ_OSIF is not setCONFIG_I2C_TAOS_EVM=m
# CONFIG_I2C_TINY_USB is not set
# CONFIG_I2C_VIPERBOARD is not set
#
# Other I2C/SMBus bus drivers
#CONFIG_I2C_MLXCPLD=mCONFIG_I2C_VIRTIO=y
# end of I2C Hardware Bus support
CONFIG_I2C_STUB=mCONFIG_I2C_SLAVE=y
# CONFIG_I2C_SLAVE_EEPROM is not setCONFIG_I2C_SLAVE_TESTUNIT=y
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# end of I2C support
CONFIG_I3C=yCONFIG_CDNS_I3C_MASTER=yCONFIG_DW_I3C_MASTER=yCONFIG_SVC_I3C_MASTER=mCONFIG_MIPI_I3C_HCI=yCONFIG_SPI=y
# CONFIG_SPI_DEBUG is not setCONFIG_SPI_MASTER=yCONFIG_SPI_MEM=y
#
# SPI Master Controller Drivers
#CONFIG_SPI_ALTERA=yCONFIG_SPI_ALTERA_CORE=yCONFIG_SPI_ALTERA_DFL=m
# CONFIG_SPI_AR934X is not setCONFIG_SPI_ATH79=y
# CONFIG_SPI_ARMADA_3700 is not set
# CONFIG_SPI_AT91_USART is not setCONFIG_SPI_AXI_SPI_ENGINE=m
# CONFIG_SPI_BCM2835 is not setCONFIG_SPI_BCM2835AUX=y
# CONFIG_SPI_BCM63XX is not setCONFIG_SPI_BCM63XX_HSSPI=mCONFIG_SPI_BCM_QSPI=mCONFIG_SPI_BITBANG=yCONFIG_SPI_CADENCE=yCONFIG_SPI_CADENCE_XSPI=yCONFIG_SPI_CLPS711X=mCONFIG_SPI_DESIGNWARE=y
# CONFIG_SPI_DW_DMA is not set
# CONFIG_SPI_DW_MMIO is not setCONFIG_SPI_DW_BT1=yCONFIG_SPI_DW_BT1_DIRMAP=yCONFIG_SPI_DLN2=m
# CONFIG_SPI_EP93XX is not setCONFIG_SPI_FSL_LPSPI=mCONFIG_SPI_FSL_QUADSPI=yCONFIG_SPI_GXP=mCONFIG_SPI_HISI_KUNPENG=mCONFIG_SPI_HISI_SFC_V3XX=m
# CONFIG_SPI_NXP_FLEXSPI is not set
# CONFIG_SPI_GPIO is not set
# CONFIG_SPI_IMG_SPFI is not setCONFIG_SPI_IMX=mCONFIG_SPI_INGENIC=yCONFIG_SPI_INTEL=yCONFIG_SPI_INTEL_PLATFORM=yCONFIG_SPI_LP8841_RTC=mCONFIG_SPI_FSL_DSPI=mCONFIG_SPI_MESON_SPIFC=y
# CONFIG_SPI_MICROCHIP_CORE is not setCONFIG_SPI_MICROCHIP_CORE_QSPI=y
# CONFIG_SPI_MT65XX is not set
# CONFIG_SPI_MT7621 is not set
# CONFIG_SPI_MTK_NOR is not setCONFIG_SPI_NPCM_PSPI=y
# CONFIG_SPI_LANTIQ_SSC is not setCONFIG_SPI_OC_TINY=m
# CONFIG_SPI_OMAP24XX is not setCONFIG_SPI_TI_QSPI=mCONFIG_SPI_OMAP_100K=yCONFIG_SPI_ORION=yCONFIG_SPI_PIC32=yCONFIG_SPI_PIC32_SQI=yCONFIG_SPI_PXA2XX=yCONFIG_SPI_ROCKCHIP=mCONFIG_SPI_ROCKCHIP_SFC=m
# CONFIG_SPI_RPCIF is not setCONFIG_SPI_RSPI=mCONFIG_SPI_QUP=mCONFIG_SPI_S3C64XX=mCONFIG_SPI_SC18IS602=y
# CONFIG_SPI_SH is not setCONFIG_SPI_SH_HSPI=m
# CONFIG_SPI_SIFIVE is not setCONFIG_SPI_SPRD=y
# CONFIG_SPI_SPRD_ADI is not set
# CONFIG_SPI_STM32 is not set
# CONFIG_SPI_ST_SSC4 is not set
# CONFIG_SPI_SUN4I is not setCONFIG_SPI_SUN6I=mCONFIG_SPI_SUNPLUS_SP7021=y
# CONFIG_SPI_SYNQUACER is not setCONFIG_SPI_MXIC=yCONFIG_SPI_TEGRA210_QUAD=mCONFIG_SPI_TEGRA114=mCONFIG_SPI_TEGRA20_SFLASH=mCONFIG_SPI_TEGRA20_SLINK=yCONFIG_SPI_XCOMM=yCONFIG_SPI_XILINX=yCONFIG_SPI_XLP=mCONFIG_SPI_XTENSA_XTFPGA=yCONFIG_SPI_ZYNQ_QSPI=m
# CONFIG_SPI_ZYNQMP_GQSPI is not set
# CONFIG_SPI_AMD is not set
#
# SPI Multiplexer support
#CONFIG_SPI_MUX=y
#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not setCONFIG_SPI_LOOPBACK_TEST=mCONFIG_SPI_TLE62X0=m
# CONFIG_SPI_SLAVE is not setCONFIG_SPMI=m
# CONFIG_SPMI_HISI3670 is not setCONFIG_SPMI_MSM_PMIC_ARB=m
# CONFIG_SPMI_MTK_PMIF is not setCONFIG_HSI=yCONFIG_HSI_BOARDINFO=y
#
# HSI controllers
#
#
# HSI clients
#CONFIG_HSI_CHAR=mCONFIG_PPS=y
# CONFIG_PPS_DEBUG is not set
# CONFIG_NTP_PPS is not set
#
# PPS clients support
#
# CONFIG_PPS_CLIENT_KTIMER is not set
# CONFIG_PPS_CLIENT_LDISC is not setCONFIG_PPS_CLIENT_GPIO=m
#
# PPS generators support
#
#
# PTP clock support
#CONFIG_PTP_1588_CLOCK_OPTIONAL=y
#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks. #
# end of PTP clock support
CONFIG_PINCTRL=yCONFIG_GENERIC_PINCTRL_GROUPS=yCONFIG_PINMUX=yCONFIG_PINCONF=yCONFIG_GENERIC_PINCONF=y
# CONFIG_DEBUG_PINCTRL is not set
# CONFIG_PINCTRL_AMD is not set
# CONFIG_PINCTRL_CY8C95X0 is not set
# CONFIG_PINCTRL_MCP23S08 is not set
# CONFIG_PINCTRL_SX150X is not setCONFIG_PINCTRL_MADERA=mCONFIG_PINCTRL_CS47L15=yCONFIG_PINCTRL_CS47L85=yCONFIG_PINCTRL_CS47L90=yCONFIG_PINCTRL_CS47L92=y
#
# Intel pinctrl drivers
#
# end of Intel pinctrl drivers
#
# MediaTek pinctrl drivers
#CONFIG_EINT_MTK=y
# end of MediaTek pinctrl drivers
CONFIG_PINCTRL_PXA=yCONFIG_PINCTRL_PXA25X=y
# CONFIG_PINCTRL_PXA27X is not setCONFIG_PINCTRL_MSM=m
# CONFIG_PINCTRL_SC7280_LPASS_LPI is not setCONFIG_PINCTRL_SM8250_LPASS_LPI=mCONFIG_PINCTRL_SM8350=mCONFIG_PINCTRL_SM8450_LPASS_LPI=m
# CONFIG_PINCTRL_SC8280XP_LPASS_LPI is not setCONFIG_PINCTRL_LPASS_LPI=m
#
# Renesas pinctrl drivers
#
# CONFIG_PINCTRL_RENESAS is not setCONFIG_PINCTRL_SH_PFC=yCONFIG_PINCTRL_SH_PFC_GPIO=yCONFIG_PINCTRL_SH_FUNC_GPIO=y
# CONFIG_PINCTRL_PFC_EMEV2 is not set
# CONFIG_PINCTRL_PFC_R8A77995 is not set
# CONFIG_PINCTRL_PFC_R8A7794 is not setCONFIG_PINCTRL_PFC_R8A77990=y
# CONFIG_PINCTRL_PFC_R8A7779 is not set
# CONFIG_PINCTRL_PFC_R8A7790 is not setCONFIG_PINCTRL_PFC_R8A77950=y
# CONFIG_PINCTRL_PFC_R8A77951 is not set
# CONFIG_PINCTRL_PFC_R8A7778 is not setCONFIG_PINCTRL_PFC_R8A7793=yCONFIG_PINCTRL_PFC_R8A7791=yCONFIG_PINCTRL_PFC_R8A77965=y
# CONFIG_PINCTRL_PFC_R8A77960 is not set
# CONFIG_PINCTRL_PFC_R8A77961 is not setCONFIG_PINCTRL_PFC_R8A779F0=y
# CONFIG_PINCTRL_PFC_R8A7792 is not set
# CONFIG_PINCTRL_PFC_R8A77980 is not set
# CONFIG_PINCTRL_PFC_R8A77970 is not setCONFIG_PINCTRL_PFC_R8A779A0=yCONFIG_PINCTRL_PFC_R8A779G0=yCONFIG_PINCTRL_PFC_R8A7740=yCONFIG_PINCTRL_PFC_R8A73A4=yCONFIG_PINCTRL_PFC_R8A77470=y
# CONFIG_PINCTRL_PFC_R8A7745 is not setCONFIG_PINCTRL_PFC_R8A7742=y
# CONFIG_PINCTRL_PFC_R8A7743 is not set
# CONFIG_PINCTRL_PFC_R8A7744 is not setCONFIG_PINCTRL_PFC_R8A774C0=yCONFIG_PINCTRL_PFC_R8A774E1=yCONFIG_PINCTRL_PFC_R8A774A1=yCONFIG_PINCTRL_PFC_R8A774B1=yCONFIG_PINCTRL_PFC_SH7203=y
# CONFIG_PINCTRL_PFC_SH7264 is not set
# CONFIG_PINCTRL_PFC_SH7269 is not set
# CONFIG_PINCTRL_PFC_SH7720 is not setCONFIG_PINCTRL_PFC_SH7722=y
# CONFIG_PINCTRL_PFC_SH7734 is not set
# CONFIG_PINCTRL_PFC_SH7757 is not setCONFIG_PINCTRL_PFC_SH7785=yCONFIG_PINCTRL_PFC_SH7786=y
# CONFIG_PINCTRL_PFC_SH73A0 is not set
# CONFIG_PINCTRL_PFC_SH7723 is not set
# CONFIG_PINCTRL_PFC_SH7724 is not set
# CONFIG_PINCTRL_PFC_SHX3 is not set
# end of Renesas pinctrl drivers
CONFIG_GPIOLIB=yCONFIG_GPIOLIB_FASTPATH_LIMIT=512CONFIG_GPIOLIB_IRQCHIP=y
# CONFIG_DEBUG_GPIO is not setCONFIG_GPIO_SYSFS=yCONFIG_GPIO_CDEV=yCONFIG_GPIO_CDEV_V1=yCONFIG_GPIO_GENERIC=yCONFIG_GPIO_REGMAP=mCONFIG_GPIO_MAX730X=y
#
# Memory mapped GPIO drivers
#CONFIG_GPIO_ATH79=m
# CONFIG_GPIO_CLPS711X is not set
# CONFIG_GPIO_DWAPB is not setCONFIG_GPIO_GENERIC_PLATFORM=yCONFIG_GPIO_HISI=yCONFIG_GPIO_IMX_SCU=yCONFIG_GPIO_IOP=y
# CONFIG_GPIO_MB86S7X is not setCONFIG_GPIO_MPC8XXX=yCONFIG_GPIO_MXC=y
# CONFIG_GPIO_MXS is not set
# CONFIG_GPIO_PXA is not set
# CONFIG_GPIO_RCAR is not setCONFIG_GPIO_ROCKCHIP=mCONFIG_GPIO_SIOX=mCONFIG_GPIO_XGENE_SB=y
# CONFIG_GPIO_XLP is not setCONFIG_GPIO_AMD_FCH=m
# CONFIG_GPIO_IDT3243X is not set
# end of Memory mapped GPIO drivers
#
# I2C GPIO expanders
#CONFIG_GPIO_MAX7300=mCONFIG_GPIO_MAX732X=mCONFIG_GPIO_PCA953X=y
# CONFIG_GPIO_PCA953X_IRQ is not set
# CONFIG_GPIO_PCA9570 is not setCONFIG_GPIO_PCF857X=y
# CONFIG_GPIO_TPIC2810 is not setCONFIG_GPIO_TS4900=y
# end of I2C GPIO expanders
#
# MFD GPIO expanders
#
# CONFIG_GPIO_ADP5520 is not set
# CONFIG_GPIO_BD9571MWV is not setCONFIG_GPIO_DA9052=mCONFIG_GPIO_DLN2=mCONFIG_GPIO_KEMPLD=yCONFIG_GPIO_LP3943=m
# CONFIG_GPIO_LP873X is not setCONFIG_GPIO_MADERA=mCONFIG_GPIO_SL28CPLD=mCONFIG_GPIO_TPS65086=yCONFIG_GPIO_TPS6586X=yCONFIG_GPIO_TQMX86=mCONFIG_GPIO_TWL4030=y
# CONFIG_GPIO_WM831X is not set
# end of MFD GPIO expanders
#
# SPI GPIO expanders
#CONFIG_GPIO_MAX3191X=mCONFIG_GPIO_MAX7301=yCONFIG_GPIO_MC33880=m
# CONFIG_GPIO_PISOSR is not set
# CONFIG_GPIO_XRA1403 is not set
# end of SPI GPIO expanders
#
# USB GPIO expanders
#CONFIG_GPIO_VIPERBOARD=m
# end of USB GPIO expanders
#
# Virtual GPIO drivers
#CONFIG_GPIO_AGGREGATOR=mCONFIG_GPIO_MOCKUP=mCONFIG_GPIO_VIRTIO=mCONFIG_GPIO_SIM=m
# end of Virtual GPIO drivers
CONFIG_W1=y
# CONFIG_W1_CON is not set
#
# 1-wire Bus Masters
#
# CONFIG_W1_MASTER_DS2490 is not setCONFIG_W1_MASTER_DS2482=yCONFIG_W1_MASTER_MXC=mCONFIG_W1_MASTER_DS1WM=yCONFIG_W1_MASTER_GPIO=yCONFIG_W1_MASTER_SGI=y
# end of 1-wire Bus Masters
#
# 1-wire Slaves
#CONFIG_W1_SLAVE_THERM=y
# CONFIG_W1_SLAVE_SMEM is not set
# CONFIG_W1_SLAVE_DS2405 is not set
# CONFIG_W1_SLAVE_DS2408 is not set
# CONFIG_W1_SLAVE_DS2413 is not setCONFIG_W1_SLAVE_DS2406=yCONFIG_W1_SLAVE_DS2423=y
# CONFIG_W1_SLAVE_DS2805 is not set
# CONFIG_W1_SLAVE_DS2430 is not setCONFIG_W1_SLAVE_DS2431=m
# CONFIG_W1_SLAVE_DS2433 is not set
# CONFIG_W1_SLAVE_DS2438 is not setCONFIG_W1_SLAVE_DS250X=mCONFIG_W1_SLAVE_DS2780=yCONFIG_W1_SLAVE_DS2781=y
# CONFIG_W1_SLAVE_DS28E04 is not set
# CONFIG_W1_SLAVE_DS28E17 is not set
# end of 1-wire Slaves
# CONFIG_POWER_RESET is not setCONFIG_POWER_SUPPLY=yCONFIG_POWER_SUPPLY_DEBUG=yCONFIG_PDA_POWER=yCONFIG_IP5XXX_POWER=mCONFIG_MAX8925_POWER=mCONFIG_WM831X_BACKUP=mCONFIG_WM831X_POWER=mCONFIG_TEST_POWER=y
# CONFIG_CHARGER_ADP5061 is not set
# CONFIG_BATTERY_ACT8945A is not set
# CONFIG_BATTERY_CW2015 is not setCONFIG_BATTERY_DS2760=yCONFIG_BATTERY_DS2780=mCONFIG_BATTERY_DS2781=yCONFIG_BATTERY_DS2782=m
# CONFIG_BATTERY_SAMSUNG_SDI is not setCONFIG_BATTERY_SBS=y
# CONFIG_CHARGER_SBS is not setCONFIG_MANAGER_SBS=yCONFIG_BATTERY_BQ27XXX=yCONFIG_BATTERY_BQ27XXX_I2C=y
# CONFIG_BATTERY_BQ27XXX_HDQ is not setCONFIG_BATTERY_BQ27XXX_DT_UPDATES_NVM=yCONFIG_BATTERY_DA9052=yCONFIG_BATTERY_DA9150=mCONFIG_BATTERY_MAX17040=mCONFIG_BATTERY_MAX17042=mCONFIG_BATTERY_MAX1721X=m
# CONFIG_CHARGER_ISP1704 is not set
# CONFIG_CHARGER_MAX8903 is not setCONFIG_CHARGER_LP8727=y
# CONFIG_CHARGER_GPIO is not setCONFIG_CHARGER_MANAGER=mCONFIG_CHARGER_LT3651=yCONFIG_CHARGER_LTC4162L=mCONFIG_CHARGER_MAX77693=mCONFIG_CHARGER_MAX77976=y
# CONFIG_CHARGER_MAX8997 is not setCONFIG_CHARGER_MAX8998=mCONFIG_CHARGER_MT6360=m
# CONFIG_CHARGER_BQ2415X is not setCONFIG_CHARGER_BQ24190=yCONFIG_CHARGER_BQ24257=m
# CONFIG_CHARGER_BQ24735 is not setCONFIG_CHARGER_BQ2515X=y
# CONFIG_CHARGER_BQ25890 is not setCONFIG_CHARGER_BQ25980=yCONFIG_CHARGER_BQ256XX=yCONFIG_CHARGER_SMB347=yCONFIG_CHARGER_TPS65090=yCONFIG_BATTERY_GAUGE_LTC2941=mCONFIG_BATTERY_GOLDFISH=mCONFIG_BATTERY_RT5033=yCONFIG_CHARGER_RT9455=mCONFIG_CHARGER_SC2731=mCONFIG_CHARGER_BD99954=yCONFIG_BATTERY_ACER_A500=mCONFIG_BATTERY_UG3105=yCONFIG_HWMON=mCONFIG_HWMON_VID=m
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#CONFIG_SENSORS_AD7314=m
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set CONFIG_SENSORS_ADM1025=m
# CONFIG_SENSORS_ADM1026 is not set CONFIG_SENSORS_ADM1029=m CONFIG_SENSORS_ADM1031=m CONFIG_SENSORS_ADM1177=m
# CONFIG_SENSORS_ADM9240 is not set CONFIG_SENSORS_ADT7X10=m CONFIG_SENSORS_ADT7310=m
# CONFIG_SENSORS_ADT7410 is not set
# CONFIG_SENSORS_ADT7411 is not set CONFIG_SENSORS_ADT7462=m CONFIG_SENSORS_ADT7470=m CONFIG_SENSORS_ADT7475=m
# CONFIG_SENSORS_AHT10 is not set
# CONFIG_SENSORS_AQUACOMPUTER_D5NEXT is not set CONFIG_SENSORS_AS370=m
# CONFIG_SENSORS_ASC7621 is not set CONFIG_SENSORS_AXI_FAN_CONTROL=m CONFIG_SENSORS_ARM_SCMI=m
# CONFIG_SENSORS_ARM_SCPI is not set
# CONFIG_SENSORS_ASB100 is not set CONFIG_SENSORS_ASPEED=m CONFIG_SENSORS_ATXP1=m CONFIG_SENSORS_BT1_PVT=m
# CONFIG_SENSORS_BT1_PVT_ALARMS is not set CONFIG_SENSORS_CORSAIR_CPRO=m CONFIG_SENSORS_CORSAIR_PSU=m
# CONFIG_SENSORS_DS620 is not set CONFIG_SENSORS_DS1621=m CONFIG_SENSORS_DA9052_ADC=m
# CONFIG_SENSORS_SPARX5 is not set CONFIG_SENSORS_F71805F=m CONFIG_SENSORS_F71882FG=m
# CONFIG_SENSORS_F75375S is not set CONFIG_SENSORS_MC13783_ADC=m
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_FTSTEUTATES is not set
# CONFIG_SENSORS_GL518SM is not set CONFIG_SENSORS_GL520SM=m CONFIG_SENSORS_G760A=m CONFIG_SENSORS_G762=m CONFIG_SENSORS_HIH6130=m
# CONFIG_SENSORS_IBMAEM is not set
# CONFIG_SENSORS_IBMPEX is not set CONFIG_SENSORS_IT87=m CONFIG_SENSORS_JC42=m CONFIG_SENSORS_POWR1220=m
# CONFIG_SENSORS_LAN966X is not set CONFIG_SENSORS_LINEAGE=m CONFIG_SENSORS_LTC2945=m CONFIG_SENSORS_LTC2947=m CONFIG_SENSORS_LTC2947_I2C=m CONFIG_SENSORS_LTC2947_SPI=m CONFIG_SENSORS_LTC2990=m CONFIG_SENSORS_LTC2992=m CONFIG_SENSORS_LTC4151=m CONFIG_SENSORS_LTC4215=m CONFIG_SENSORS_LTC4222=m
# CONFIG_SENSORS_LTC4245 is not set CONFIG_SENSORS_LTC4260=m CONFIG_SENSORS_LTC4261=m CONFIG_SENSORS_MAX1111=m
# CONFIG_SENSORS_MAX127 is not set
# CONFIG_SENSORS_MAX16065 is not set CONFIG_SENSORS_MAX1619=m CONFIG_SENSORS_MAX1668=m CONFIG_SENSORS_MAX197=m CONFIG_SENSORS_MAX31722=m
# CONFIG_SENSORS_MAX31730 is not set
# CONFIG_SENSORS_MAX31760 is not set CONFIG_SENSORS_MAX6620=m
# CONFIG_SENSORS_MAX6621 is not set CONFIG_SENSORS_MAX6639=m
# CONFIG_SENSORS_MAX6650 is not set CONFIG_SENSORS_MAX6697=m CONFIG_SENSORS_MAX31790=m
# CONFIG_SENSORS_MCP3021 is not set CONFIG_SENSORS_TC654=m CONFIG_SENSORS_TPS23861=m CONFIG_SENSORS_MENF21BMC_HWMON=m
# CONFIG_SENSORS_MR75203 is not set
# CONFIG_SENSORS_ADCXX is not set
# CONFIG_SENSORS_LM63 is not set CONFIG_SENSORS_LM70=m CONFIG_SENSORS_LM73=m CONFIG_SENSORS_LM75=m CONFIG_SENSORS_LM77=m CONFIG_SENSORS_LM78=m CONFIG_SENSORS_LM80=m CONFIG_SENSORS_LM83=m
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set CONFIG_SENSORS_LM90=m CONFIG_SENSORS_LM92=m CONFIG_SENSORS_LM93=m CONFIG_SENSORS_LM95234=m
# CONFIG_SENSORS_LM95241 is not set CONFIG_SENSORS_LM95245=m CONFIG_SENSORS_PC87360=m CONFIG_SENSORS_PC87427=m CONFIG_SENSORS_NCT6683=m CONFIG_SENSORS_NCT6775_CORE=m CONFIG_SENSORS_NCT6775=m CONFIG_SENSORS_NCT6775_I2C=m CONFIG_SENSORS_NCT7802=m CONFIG_SENSORS_NCT7904=m
# CONFIG_SENSORS_NPCM7XX is not set CONFIG_SENSORS_NZXT_KRAKEN2=m CONFIG_SENSORS_NZXT_SMART2=m
# CONFIG_SENSORS_OCC_P8_I2C is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_PECI_CPUTEMP is not set CONFIG_SENSORS_PECI_DIMMTEMP=m CONFIG_SENSORS_PECI=m
# CONFIG_PMBUS is not set CONFIG_SENSORS_PWM_FAN=m CONFIG_SENSORS_RASPBERRYPI_HWMON=m
# CONFIG_SENSORS_SL28CPLD is not set CONFIG_SENSORS_SBTSI=m CONFIG_SENSORS_SBRMI=m
# CONFIG_SENSORS_SHT15 is not set CONFIG_SENSORS_SHT21=m
# CONFIG_SENSORS_SHT3x is not set
# CONFIG_SENSORS_SHT4x is not set CONFIG_SENSORS_SHTC1=m
# CONFIG_SENSORS_SY7636A is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_EMC1403 is not set
# CONFIG_SENSORS_EMC2103 is not set
# CONFIG_SENSORS_EMC2305 is not set
# CONFIG_SENSORS_EMC6W201 is not set CONFIG_SENSORS_SMSC47M1=m CONFIG_SENSORS_SMSC47M192=m
# CONFIG_SENSORS_SMSC47B397 is not set CONFIG_SENSORS_SCH56XX_COMMON=m CONFIG_SENSORS_SCH5627=m
# CONFIG_SENSORS_SCH5636 is not set CONFIG_SENSORS_STTS751=m CONFIG_SENSORS_SMM665=m
# CONFIG_SENSORS_ADC128D818 is not set CONFIG_SENSORS_ADS7828=m CONFIG_SENSORS_ADS7871=m CONFIG_SENSORS_AMC6821=m
# CONFIG_SENSORS_INA209 is not set CONFIG_SENSORS_INA2XX=m
# CONFIG_SENSORS_INA238 is not set CONFIG_SENSORS_INA3221=m CONFIG_SENSORS_TC74=m
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP102 is not set
# CONFIG_SENSORS_TMP103 is not set
# CONFIG_SENSORS_TMP108 is not set CONFIG_SENSORS_TMP401=m CONFIG_SENSORS_TMP421=m
# CONFIG_SENSORS_TMP464 is not set CONFIG_SENSORS_TMP513=m CONFIG_SENSORS_VT1211=m CONFIG_SENSORS_W83773G=m
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set CONFIG_SENSORS_W83795=m
# CONFIG_SENSORS_W83795_FANCTRL is not set CONFIG_SENSORS_W83L785TS=m CONFIG_SENSORS_W83L786NG=m CONFIG_SENSORS_W83627HF=m CONFIG_SENSORS_W83627EHF=m CONFIG_SENSORS_WM831X=m CONFIG_SENSORS_INTEL_M10_BMC_HWMON=m CONFIG_THERMAL=yCONFIG_THERMAL_NETLINK=y CONFIG_THERMAL_STATISTICS=y CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0 # CONFIG_THERMAL_WRITABLE_TRIPS is not set # CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE is not set CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE=y
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set CONFIG_THERMAL_GOV_FAIR_SHARE=y
# CONFIG_THERMAL_GOV_STEP_WISE is not set # CONFIG_THERMAL_GOV_BANG_BANG is not set CONFIG_THERMAL_GOV_USER_SPACE=y
# CONFIG_DEVFREQ_THERMAL is not set CONFIG_THERMAL_EMULATION=y CONFIG_K3_THERMAL=y CONFIG_ROCKCHIP_THERMAL=m CONFIG_RCAR_THERMAL=y
# CONFIG_MTK_THERMAL is not set
#
# Intel thermal drivers
#
#
# ACPI INT340X thermal drivers
#
# end of ACPI INT340X thermal drivers # end of Intel thermal drivers
#
# Broadcom thermal drivers
#CONFIG_BRCMSTB_THERMAL=yCONFIG_BCM_NS_THERMAL=yCONFIG_BCM_SR_THERMAL=y
# end of Broadcom thermal drivers
#
# Texas Instruments thermal drivers
#
# CONFIG_TI_SOC_THERMAL is not set
# end of Texas Instruments thermal drivers
#
# Samsung thermal drivers
#
# end of Samsung thermal drivers
#
# NVIDIA Tegra thermal drivers
#CONFIG_TEGRA_SOCTHERM=y
# CONFIG_TEGRA_BPMP_THERMAL is not setCONFIG_TEGRA30_TSENSOR=m
# end of NVIDIA Tegra thermal drivers
#
# Qualcomm thermal drivers
#CONFIG_QCOM_TSENS=m
# end of Qualcomm thermal drivers
CONFIG_SPRD_THERMAL=yCONFIG_WATCHDOG=yCONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not setCONFIG_WATCHDOG_HANDLE_BOOT_ENABLED=yCONFIG_WATCHDOG_OPEN_TIMEOUT=0
# CONFIG_WATCHDOG_SYSFS is not set
# CONFIG_WATCHDOG_HRTIMER_PRETIMEOUT is not set
#
# Watchdog Pretimeout Governors
#CONFIG_WATCHDOG_PRETIMEOUT_GOV=yCONFIG_WATCHDOG_PRETIMEOUT_GOV_SEL=m
# CONFIG_WATCHDOG_PRETIMEOUT_GOV_NOOP is not setCONFIG_WATCHDOG_PRETIMEOUT_GOV_PANIC=mCONFIG_WATCHDOG_PRETIMEOUT_DEFAULT_GOV_PANIC=y
#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_DA9052_WATCHDOG is not setCONFIG_DA9055_WATCHDOG=mCONFIG_DA9063_WATCHDOG=y
# CONFIG_DA9062_WATCHDOG is not set
# CONFIG_MENF21BMC_WATCHDOG is not set
# CONFIG_WM831X_WATCHDOG is not setCONFIG_XILINX_WATCHDOG=yCONFIG_ZIIRAVE_WATCHDOG=mCONFIG_RAVE_SP_WATCHDOG=mCONFIG_SL28CPLD_WATCHDOG=yCONFIG_ARMADA_37XX_WATCHDOG=yCONFIG_AT91RM9200_WATCHDOG=yCONFIG_AT91SAM9X_WATCHDOG=yCONFIG_SAMA5D4_WATCHDOG=y
# CONFIG_CADENCE_WATCHDOG is not set
# CONFIG_FTWDT010_WATCHDOG is not setCONFIG_S3C2410_WATCHDOG=yCONFIG_DW_WATCHDOG=mCONFIG_EP93XX_WATCHDOG=mCONFIG_OMAP_WATCHDOG=yCONFIG_PNX4008_WATCHDOG=yCONFIG_DAVINCI_WATCHDOG=yCONFIG_K3_RTI_WATCHDOG=yCONFIG_RN5T618_WATCHDOG=yCONFIG_SUNXI_WATCHDOG=mCONFIG_NPCM7XX_WATCHDOG=y
# CONFIG_TWL4030_WATCHDOG is not setCONFIG_STMP3XXX_RTC_WATCHDOG=yCONFIG_TS72XX_WATCHDOG=mCONFIG_MAX63XX_WATCHDOG=mCONFIG_MAX77620_WATCHDOG=yCONFIG_IMX2_WDT=yCONFIG_IMX7ULP_WDT=yCONFIG_RETU_WATCHDOG=m
# CONFIG_MOXART_WDT is not setCONFIG_TEGRA_WATCHDOG=y
# CONFIG_QCOM_WDT is not setCONFIG_MESON_GXBB_WATCHDOG=mCONFIG_MESON_WATCHDOG=mCONFIG_MEDIATEK_WATCHDOG=mCONFIG_DIGICOLOR_WATCHDOG=mCONFIG_LPC18XX_WATCHDOG=mCONFIG_RENESAS_WDT=m
# CONFIG_RENESAS_RZAWDT is not setCONFIG_RENESAS_RZN1WDT=m
# CONFIG_RENESAS_RZG2LWDT is not set
# CONFIG_ASPEED_WATCHDOG is not setCONFIG_SPRD_WATCHDOG=yCONFIG_VISCONTI_WATCHDOG=mCONFIG_MSC313E_WATCHDOG=m
# CONFIG_APPLE_WATCHDOG is not setCONFIG_SUNPLUS_WATCHDOG=y
# CONFIG_SC520_WDT is not setCONFIG_KEMPLD_WDT=mCONFIG_BCM47XX_WDT=m
# CONFIG_BCM_KONA_WDT is not setCONFIG_BCM7038_WDT=mCONFIG_IMGPDC_WDT=y
# CONFIG_MPC5200_WDT is not set
# CONFIG_MEN_A21_WDT is not set
# CONFIG_UML_WATCHDOG is not set
#
# USB-based Watchdog Cards
#CONFIG_USBPCWATCHDOG=mCONFIG_SSB_POSSIBLE=yCONFIG_SSB=yCONFIG_SSB_SDIOHOST_POSSIBLE=y
# CONFIG_SSB_SDIOHOST is not set
# CONFIG_SSB_DRIVER_GPIO is not setCONFIG_BCMA_POSSIBLE=yCONFIG_BCMA=m
# CONFIG_BCMA_HOST_SOC is not setCONFIG_BCMA_DRIVER_MIPS=yCONFIG_BCMA_PFLASH=yCONFIG_BCMA_NFLASH=y
# CONFIG_BCMA_DRIVER_GMAC_CMN is not set
# CONFIG_BCMA_DRIVER_GPIO is not setCONFIG_BCMA_DEBUG=y
#
# Multifunction device drivers
#CONFIG_MFD_CORE=y
# CONFIG_MFD_SUN4I_GPADC is not setCONFIG_MFD_AS3711=yCONFIG_PMIC_ADP5520=yCONFIG_MFD_AAT2870_CORE=yCONFIG_MFD_AT91_USART=y
# CONFIG_MFD_BCM590XX is not setCONFIG_MFD_BD9571MWV=yCONFIG_MFD_AXP20X=yCONFIG_MFD_AXP20X_I2C=yCONFIG_MFD_MADERA=mCONFIG_MFD_MADERA_I2C=m
# CONFIG_MFD_MADERA_SPI is not setCONFIG_MFD_CS47L15=y
# CONFIG_MFD_CS47L35 is not setCONFIG_MFD_CS47L85=yCONFIG_MFD_CS47L90=yCONFIG_MFD_CS47L92=y
# CONFIG_MFD_ASIC3 is not set
# CONFIG_PMIC_DA903X is not setCONFIG_PMIC_DA9052=yCONFIG_MFD_DA9052_SPI=y
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_MFD_DA9055 is not set
# CONFIG_MFD_DA9062 is not set
# CONFIG_MFD_DA9063 is not setCONFIG_MFD_DA9150=mCONFIG_MFD_DLN2=yCONFIG_MFD_ENE_KB3930=mCONFIG_MFD_EXYNOS_LPASS=mCONFIG_MFD_MC13XXX=mCONFIG_MFD_MC13XXX_SPI=mCONFIG_MFD_MC13XXX_I2C=mCONFIG_MFD_MP2629=m
# CONFIG_MFD_MXS_LRADC is not setCONFIG_MFD_MX25_TSADC=m
# CONFIG_HTC_PASIC3 is not set
# CONFIG_HTC_I2CPLD is not setCONFIG_MFD_IQS62X=mCONFIG_MFD_KEMPLD=y
# CONFIG_MFD_88PM800 is not setCONFIG_MFD_88PM805=y
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_MAX14577 is not set
# CONFIG_MFD_MAX77620 is not set
# CONFIG_MFD_MAX77650 is not setCONFIG_MFD_MAX77686=mCONFIG_MFD_MAX77693=mCONFIG_MFD_MAX77714=mCONFIG_MFD_MAX77843=yCONFIG_MFD_MAX8907=mCONFIG_MFD_MAX8925=yCONFIG_MFD_MAX8997=yCONFIG_MFD_MAX8998=yCONFIG_MFD_MT6360=mCONFIG_MFD_MT6370=yCONFIG_MFD_MT6397=mCONFIG_MFD_MENF21BMC=mCONFIG_MFD_OCELOT=mCONFIG_EZX_PCAP=y
# CONFIG_MFD_CPCAP is not setCONFIG_MFD_VIPERBOARD=m
# CONFIG_MFD_NTXEC is not setCONFIG_MFD_RETU=m
# CONFIG_MFD_PCF50633 is not setCONFIG_MFD_PM8XXX=mCONFIG_MFD_SY7636A=mCONFIG_MFD_RT4831=m
# CONFIG_MFD_RT5033 is not setCONFIG_MFD_RT5120=m
# CONFIG_MFD_RC5T583 is not set
# CONFIG_MFD_SEC_CORE is not set
# CONFIG_MFD_SI476X_CORE is not setCONFIG_MFD_SIMPLE_MFD_I2C=m
# CONFIG_MFD_SL28CPLD is not setCONFIG_MFD_SM501=m
# CONFIG_MFD_SM501_GPIO is not set
# CONFIG_MFD_SKY81452 is not setCONFIG_MFD_SC27XX_PMIC=y
# CONFIG_ABX500_CORE is not setCONFIG_MFD_SUN6I_PRCM=yCONFIG_MFD_SYSCON=yCONFIG_MFD_TI_AM335X_TSCADC=mCONFIG_MFD_LP3943=y
# CONFIG_MFD_LP8788 is not setCONFIG_MFD_TI_LMU=m
# CONFIG_MFD_PALMAS is not setCONFIG_TPS6105X=yCONFIG_TPS65010=mCONFIG_TPS6507X=yCONFIG_MFD_TPS65086=yCONFIG_MFD_TPS65090=yCONFIG_MFD_TI_LP873X=mCONFIG_MFD_TPS6586X=y
# CONFIG_MFD_TPS65910 is not set
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_MFD_TPS65912_SPI is not setCONFIG_TWL4030_CORE=yCONFIG_MFD_TWL4030_AUDIO=y
# CONFIG_TWL6040_CORE is not setCONFIG_MFD_WL1273_CORE=mCONFIG_MFD_LM3533=y
# CONFIG_MFD_TQMX86 is not set
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_ARIZONA_SPI is not setCONFIG_MFD_WM8400=yCONFIG_MFD_WM831X=y
# CONFIG_MFD_WM831X_I2C is not setCONFIG_MFD_WM831X_SPI=y
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not setCONFIG_MFD_STW481X=yCONFIG_MFD_STM32_LPTIMER=yCONFIG_MFD_STM32_TIMERS=yCONFIG_MFD_STMFX=yCONFIG_MFD_WCD934X=m
# CONFIG_MFD_ATC260X_I2C is not setCONFIG_MFD_KHADAS_MCU=mCONFIG_MFD_ACER_A500_EC=mCONFIG_RAVE_SP_CORE=mCONFIG_MFD_INTEL_M10_BMC=m
# end of Multifunction device drivers
CONFIG_REGULATOR=yCONFIG_REGULATOR_DEBUG=yCONFIG_REGULATOR_FIXED_VOLTAGE=yCONFIG_REGULATOR_VIRTUAL_CONSUMER=mCONFIG_REGULATOR_USERSPACE_CONSUMER=yCONFIG_REGULATOR_88PG86X=yCONFIG_REGULATOR_ACT8865=mCONFIG_REGULATOR_AD5398=m
# CONFIG_REGULATOR_ANATOP is not setCONFIG_REGULATOR_AAT2870=yCONFIG_REGULATOR_AS3711=mCONFIG_REGULATOR_AXP20X=yCONFIG_REGULATOR_BD9571MWV=y
# CONFIG_REGULATOR_DA9052 is not setCONFIG_REGULATOR_DA9210=mCONFIG_REGULATOR_DA9211=mCONFIG_REGULATOR_FAN53555=yCONFIG_REGULATOR_FAN53880=y
# CONFIG_REGULATOR_GPIO is not setCONFIG_REGULATOR_ISL9305=mCONFIG_REGULATOR_ISL6271A=m
# CONFIG_REGULATOR_LM363X is not setCONFIG_REGULATOR_LP3971=mCONFIG_REGULATOR_LP3972=y
# CONFIG_REGULATOR_LP872X is not setCONFIG_REGULATOR_LP8755=y
# CONFIG_REGULATOR_LTC3589 is not set
# CONFIG_REGULATOR_LTC3676 is not set
# CONFIG_REGULATOR_MAX1586 is not set
# CONFIG_REGULATOR_MAX77620 is not set
# CONFIG_REGULATOR_MAX77650 is not setCONFIG_REGULATOR_MAX8649=mCONFIG_REGULATOR_MAX8660=m
# CONFIG_REGULATOR_MAX8893 is not setCONFIG_REGULATOR_MAX8907=mCONFIG_REGULATOR_MAX8925=mCONFIG_REGULATOR_MAX8952=mCONFIG_REGULATOR_MAX8997=mCONFIG_REGULATOR_MAX8998=m
# CONFIG_REGULATOR_MAX20086 is not setCONFIG_REGULATOR_MAX77686=yCONFIG_REGULATOR_MAX77693=mCONFIG_REGULATOR_MAX77802=mCONFIG_REGULATOR_MAX77826=yCONFIG_REGULATOR_MC13XXX_CORE=mCONFIG_REGULATOR_MC13783=m
# CONFIG_REGULATOR_MC13892 is not setCONFIG_REGULATOR_MP8859=yCONFIG_REGULATOR_MP886X=mCONFIG_REGULATOR_MT6311=y
# CONFIG_REGULATOR_MT6315 is not set
# CONFIG_REGULATOR_MT6323 is not set
# CONFIG_REGULATOR_MT6331 is not setCONFIG_REGULATOR_MT6332=mCONFIG_REGULATOR_MT6358=mCONFIG_REGULATOR_MT6359=m
# CONFIG_REGULATOR_MT6360 is not set
# CONFIG_REGULATOR_MT6370 is not set
# CONFIG_REGULATOR_MT6397 is not set
# CONFIG_REGULATOR_PBIAS is not set
# CONFIG_REGULATOR_PCA9450 is not set
# CONFIG_REGULATOR_PCAP is not setCONFIG_REGULATOR_PV88060=mCONFIG_REGULATOR_PV88080=mCONFIG_REGULATOR_PV88090=yCONFIG_REGULATOR_PWM=yCONFIG_REGULATOR_QCOM_RPMH=yCONFIG_REGULATOR_QCOM_SMD_RPM=y
# CONFIG_REGULATOR_QCOM_SPMI is not setCONFIG_REGULATOR_QCOM_USB_VBUS=mCONFIG_REGULATOR_RT4801=y
# CONFIG_REGULATOR_RT4831 is not setCONFIG_REGULATOR_RT5120=mCONFIG_REGULATOR_RT5190A=m
# CONFIG_REGULATOR_RT5759 is not setCONFIG_REGULATOR_RT6160=m
# CONFIG_REGULATOR_RT6245 is not setCONFIG_REGULATOR_RTQ2134=y
# CONFIG_REGULATOR_RTMV20 is not setCONFIG_REGULATOR_RTQ6752=mCONFIG_REGULATOR_S2MPA01=m
# CONFIG_REGULATOR_S2MPS11 is not setCONFIG_REGULATOR_S5M8767=mCONFIG_REGULATOR_SC2731=mCONFIG_REGULATOR_SLG51000=y
# CONFIG_REGULATOR_STM32_BOOSTER is not setCONFIG_REGULATOR_STM32_VREFBUF=m
# CONFIG_REGULATOR_STM32_PWR is not set
# CONFIG_REGULATOR_TI_ABB is not setCONFIG_REGULATOR_STW481X_VMMC=yCONFIG_REGULATOR_SY7636A=mCONFIG_REGULATOR_SY8106A=m
# CONFIG_REGULATOR_SY8824X is not setCONFIG_REGULATOR_SY8827N=y
# CONFIG_REGULATOR_TPS51632 is not setCONFIG_REGULATOR_TPS6105X=yCONFIG_REGULATOR_TPS62360=mCONFIG_REGULATOR_TPS65023=m
# CONFIG_REGULATOR_TPS6507X is not setCONFIG_REGULATOR_TPS65086=mCONFIG_REGULATOR_TPS65090=mCONFIG_REGULATOR_TPS65132=y
# CONFIG_REGULATOR_TPS6524X is not setCONFIG_REGULATOR_TPS6586X=m
# CONFIG_REGULATOR_TPS68470 is not set
# CONFIG_REGULATOR_TWL4030 is not setCONFIG_REGULATOR_WM831X=m
# CONFIG_REGULATOR_WM8400 is not setCONFIG_REGULATOR_QCOM_LABIBB=mCONFIG_RC_CORE=mCONFIG_LIRC=yCONFIG_RC_MAP=mCONFIG_RC_DECODERS=y
# CONFIG_IR_IMON_DECODER is not set
# CONFIG_IR_JVC_DECODER is not set
# CONFIG_IR_MCE_KBD_DECODER is not set
# CONFIG_IR_NEC_DECODER is not setCONFIG_IR_RC5_DECODER=m
# CONFIG_IR_RC6_DECODER is not setCONFIG_IR_RCMM_DECODER=m
# CONFIG_IR_SANYO_DECODER is not setCONFIG_IR_SHARP_DECODER=m
# CONFIG_IR_SONY_DECODER is not set
# CONFIG_IR_XMP_DECODER is not setCONFIG_RC_DEVICES=yCONFIG_IR_ENE=mCONFIG_IR_FINTEK=mCONFIG_IR_GPIO_CIR=mCONFIG_IR_GPIO_TX=m
# CONFIG_IR_HIX5HD2 is not setCONFIG_IR_IGORPLUGUSB=mCONFIG_IR_IGUANA=mCONFIG_IR_IMON=m
# CONFIG_IR_IMON_RAW is not setCONFIG_IR_ITE_CIR=mCONFIG_IR_MCEUSB=mCONFIG_IR_MESON=m
# CONFIG_IR_MESON_TX is not set
# CONFIG_IR_MTK is not setCONFIG_IR_NUVOTON=mCONFIG_IR_PWM_TX=mCONFIG_IR_REDRAT3=m
# CONFIG_IR_RX51 is not setCONFIG_IR_SERIAL=m
# CONFIG_IR_SERIAL_TRANSMITTER is not setCONFIG_IR_SPI=mCONFIG_IR_STREAMZAP=mCONFIG_IR_SUNXI=mCONFIG_IR_TOY=m
# CONFIG_IR_TTUSBIR is not setCONFIG_IR_WINBOND_CIR=mCONFIG_RC_ATI_REMOTE=m
# CONFIG_RC_LOOPBACK is not setCONFIG_RC_ST=m
# CONFIG_RC_XBOX_DVD is not setCONFIG_IR_IMG=m
# CONFIG_IR_IMG_RAW is not setCONFIG_IR_IMG_HW=y
# CONFIG_IR_IMG_NEC is not set
# CONFIG_IR_IMG_JVC is not setCONFIG_IR_IMG_SONY=y
# CONFIG_IR_IMG_SHARP is not set
# CONFIG_IR_IMG_SANYO is not setCONFIG_IR_IMG_RC5=yCONFIG_IR_IMG_RC6=yCONFIG_CEC_CORE=y
#
# CEC support
#
# CONFIG_MEDIA_CEC_SUPPORT is not set
# end of CEC support
CONFIG_MEDIA_SUPPORT=yCONFIG_MEDIA_SUPPORT_FILTER=yCONFIG_MEDIA_SUBDRV_AUTOSELECT=y
#
# Media device types
#CONFIG_MEDIA_CAMERA_SUPPORT=yCONFIG_MEDIA_ANALOG_TV_SUPPORT=yCONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
# CONFIG_MEDIA_RADIO_SUPPORT is not setCONFIG_MEDIA_SDR_SUPPORT=y
# CONFIG_MEDIA_PLATFORM_SUPPORT is not setCONFIG_MEDIA_TEST_SUPPORT=y
# end of Media device types
CONFIG_VIDEO_DEV=yCONFIG_MEDIA_CONTROLLER=yCONFIG_DVB_CORE=y
#
# Video4Linux options
#CONFIG_VIDEO_V4L2_I2C=yCONFIG_VIDEO_V4L2_SUBDEV_API=y
# CONFIG_VIDEO_ADV_DEBUG is not setCONFIG_VIDEO_FIXED_MINOR_RANGES=yCONFIG_VIDEO_TUNER=mCONFIG_V4L2_MEM2MEM_DEV=m
# CONFIG_V4L2_FLASH_LED_CLASS is not setCONFIG_V4L2_FWNODE=yCONFIG_V4L2_ASYNC=y
# end of Video4Linux options
#
# Media controller options
#CONFIG_MEDIA_CONTROLLER_DVB=yCONFIG_MEDIA_CONTROLLER_REQUEST_API=y
# end of Media controller options
#
# Digital TV options
#CONFIG_DVB_MMAP=yCONFIG_DVB_NET=yCONFIG_DVB_MAX_ADAPTERS=16
# CONFIG_DVB_DYNAMIC_MINORS is not setCONFIG_DVB_DEMUX_SECTION_LOSS_LOG=y
# CONFIG_DVB_ULE_DEBUG is not set
# end of Digital TV options
#
# Media drivers
#
#
# Drivers filtered as selected at 'Filter media drivers' #
#
# Media drivers
#CONFIG_MEDIA_USB_SUPPORT=y
#
# Webcam devices
#CONFIG_USB_GSPCA=yCONFIG_USB_GSPCA_BENQ=yCONFIG_USB_GSPCA_CONEX=mCONFIG_USB_GSPCA_CPIA1=yCONFIG_USB_GSPCA_DTCS033=mCONFIG_USB_GSPCA_ETOMS=mCONFIG_USB_GSPCA_FINEPIX=y
# CONFIG_USB_GSPCA_JEILINJ is not setCONFIG_USB_GSPCA_JL2005BCD=yCONFIG_USB_GSPCA_KINECT=y
# CONFIG_USB_GSPCA_KONICA is not setCONFIG_USB_GSPCA_MARS=mCONFIG_USB_GSPCA_MR97310A=mCONFIG_USB_GSPCA_NW80X=mCONFIG_USB_GSPCA_OV519=yCONFIG_USB_GSPCA_OV534=m
# CONFIG_USB_GSPCA_OV534_9 is not setCONFIG_USB_GSPCA_PAC207=mCONFIG_USB_GSPCA_PAC7302=mCONFIG_USB_GSPCA_PAC7311=mCONFIG_USB_GSPCA_SE401=yCONFIG_USB_GSPCA_SN9C2028=mCONFIG_USB_GSPCA_SN9C20X=yCONFIG_USB_GSPCA_SONIXB=y
# CONFIG_USB_GSPCA_SONIXJ is not setCONFIG_USB_GSPCA_SPCA1528=y
# CONFIG_USB_GSPCA_SPCA500 is not setCONFIG_USB_GSPCA_SPCA501=y
# CONFIG_USB_GSPCA_SPCA505 is not setCONFIG_USB_GSPCA_SPCA506=yCONFIG_USB_GSPCA_SPCA508=mCONFIG_USB_GSPCA_SPCA561=mCONFIG_USB_GSPCA_SQ905=mCONFIG_USB_GSPCA_SQ905C=m
# CONFIG_USB_GSPCA_SQ930X is not setCONFIG_USB_GSPCA_STK014=mCONFIG_USB_GSPCA_STK1135=mCONFIG_USB_GSPCA_STV0680=y
# CONFIG_USB_GSPCA_SUNPLUS is not set
# CONFIG_USB_GSPCA_T613 is not set
# CONFIG_USB_GSPCA_TOPRO is not setCONFIG_USB_GSPCA_TOUPTEK=m
# CONFIG_USB_GSPCA_TV8532 is not setCONFIG_USB_GSPCA_VC032X=mCONFIG_USB_GSPCA_VICAM=y
# CONFIG_USB_GSPCA_XIRLINK_CIT is not setCONFIG_USB_GSPCA_ZC3XX=m
# CONFIG_USB_GL860 is not setCONFIG_USB_M5602=yCONFIG_USB_STV06XX=y
# CONFIG_USB_PWC is not set
# CONFIG_USB_S2255 is not setCONFIG_USB_VIDEO_CLASS=yCONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
#
# Analog TV USB devices
#CONFIG_VIDEO_HDPVR=yCONFIG_VIDEO_PVRUSB2=mCONFIG_VIDEO_PVRUSB2_SYSFS=y
# CONFIG_VIDEO_PVRUSB2_DVB is not set
# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not setCONFIG_VIDEO_STK1160_COMMON=yCONFIG_VIDEO_STK1160=y
#
# Analog/digital TV USB devices
#CONFIG_VIDEO_AU0828=m
# CONFIG_VIDEO_AU0828_V4L2 is not set
# CONFIG_VIDEO_AU0828_RC is not set
# CONFIG_VIDEO_CX231XX is not set
#
# Digital TV USB devices
#CONFIG_DVB_AS102=yCONFIG_DVB_B2C2_FLEXCOP_USB=yCONFIG_DVB_B2C2_FLEXCOP_USB_DEBUG=y
# CONFIG_DVB_USB_V2 is not setCONFIG_DVB_USB=m
# CONFIG_DVB_USB_DEBUG is not setCONFIG_DVB_USB_A800=m
# CONFIG_DVB_USB_AF9005 is not setCONFIG_DVB_USB_AZ6027=mCONFIG_DVB_USB_CINERGY_T2=m
# CONFIG_DVB_USB_CXUSB is not setCONFIG_DVB_USB_DIB0700=mCONFIG_DVB_USB_DIB3000MC=mCONFIG_DVB_USB_DIBUSB_MB=mCONFIG_DVB_USB_DIBUSB_MB_FAULTY=yCONFIG_DVB_USB_DIBUSB_MC=m
# CONFIG_DVB_USB_DIGITV is not setCONFIG_DVB_USB_DTT200U=m
# CONFIG_DVB_USB_DTV5100 is not setCONFIG_DVB_USB_DW2102=m
# CONFIG_DVB_USB_GP8PSK is not set
# CONFIG_DVB_USB_M920X is not set
# CONFIG_DVB_USB_NOVA_T_USB2 is not setCONFIG_DVB_USB_OPERA1=mCONFIG_DVB_USB_PCTV452E=mCONFIG_DVB_USB_TECHNISAT_USB2=mCONFIG_DVB_USB_TTUSB2=mCONFIG_DVB_USB_UMT_010=mCONFIG_DVB_USB_VP702X=mCONFIG_DVB_USB_VP7045=m
# CONFIG_SMS_USB_DRV is not set
#
# Webcam, TV (analog/digital) USB devices
#
# CONFIG_VIDEO_EM28XX is not set
#
# Software defined radio USB devices
#
# CONFIG_USB_AIRSPY is not set
# CONFIG_USB_HACKRF is not setCONFIG_USB_MSI2500=mCONFIG_V4L_TEST_DRIVERS=y
# CONFIG_VIDEO_VIM2M is not setCONFIG_VIDEO_VICODEC=mCONFIG_VIDEO_VIMC=yCONFIG_VIDEO_VIVID=yCONFIG_VIDEO_VIVID_CEC=yCONFIG_VIDEO_VIVID_MAX_DEVS=64CONFIG_DVB_TEST_DRIVERS=y
# CONFIG_DVB_VIDTV is not set
#
# FireWire (IEEE 1394) Adapters
#CONFIG_DVB_FIREDTV=mCONFIG_DVB_FIREDTV_INPUT=yCONFIG_CYPRESS_FIRMWARE=mCONFIG_TTPCI_EEPROM=mCONFIG_VIDEO_CX2341X=mCONFIG_VIDEO_TVEEPROM=mCONFIG_DVB_B2C2_FLEXCOP=yCONFIG_DVB_B2C2_FLEXCOP_DEBUG=yCONFIG_VIDEO_V4L2_TPG=yCONFIG_VIDEOBUF2_CORE=yCONFIG_VIDEOBUF2_V4L2=yCONFIG_VIDEOBUF2_MEMOPS=yCONFIG_VIDEOBUF2_DMA_CONTIG=yCONFIG_VIDEOBUF2_VMALLOC=yCONFIG_VIDEOBUF2_DMA_SG=m
# end of Media drivers
#
# Media ancillary drivers
#CONFIG_MEDIA_ATTACH=y
#
# IR I2C driver auto-selected by 'Autoselect ancillary drivers' #
# CONFIG_VIDEO_IR_I2C is not set
#
# Camera sensor devices
#CONFIG_VIDEO_APTINA_PLL=mCONFIG_VIDEO_AR0521=mCONFIG_VIDEO_HI556=mCONFIG_VIDEO_HI846=yCONFIG_VIDEO_HI847=yCONFIG_VIDEO_IMX208=mCONFIG_VIDEO_IMX214=mCONFIG_VIDEO_IMX219=yCONFIG_VIDEO_IMX258=yCONFIG_VIDEO_IMX274=yCONFIG_VIDEO_IMX290=yCONFIG_VIDEO_IMX319=yCONFIG_VIDEO_IMX355=yCONFIG_VIDEO_MAX9271_LIB=y
# CONFIG_VIDEO_MT9M001 is not setCONFIG_VIDEO_MT9M032=mCONFIG_VIDEO_MT9M111=mCONFIG_VIDEO_MT9P031=mCONFIG_VIDEO_MT9T001=m
# CONFIG_VIDEO_MT9T112 is not setCONFIG_VIDEO_MT9V011=yCONFIG_VIDEO_MT9V032=yCONFIG_VIDEO_MT9V111=y
# CONFIG_VIDEO_NOON010PC30 is not set
# CONFIG_VIDEO_OG01A1B is not setCONFIG_VIDEO_OV02A10=mCONFIG_VIDEO_OV08D10=m
# CONFIG_VIDEO_OV13858 is not setCONFIG_VIDEO_OV13B10=yCONFIG_VIDEO_OV2640=yCONFIG_VIDEO_OV2659=yCONFIG_VIDEO_OV2680=y
# CONFIG_VIDEO_OV2685 is not setCONFIG_VIDEO_OV2740=m
# CONFIG_VIDEO_OV5647 is not set
# CONFIG_VIDEO_OV5670 is not setCONFIG_VIDEO_OV5675=yCONFIG_VIDEO_OV5693=mCONFIG_VIDEO_OV5695=y
# CONFIG_VIDEO_OV6650 is not setCONFIG_VIDEO_OV7251=m
# CONFIG_VIDEO_OV7640 is not set
# CONFIG_VIDEO_OV7670 is not set
# CONFIG_VIDEO_OV772X is not setCONFIG_VIDEO_OV7740=mCONFIG_VIDEO_OV8856=yCONFIG_VIDEO_OV9640=yCONFIG_VIDEO_OV9650=m
# CONFIG_VIDEO_OV9734 is not setCONFIG_VIDEO_RDACM20=y
# CONFIG_VIDEO_RDACM21 is not setCONFIG_VIDEO_RJ54N1=mCONFIG_VIDEO_S5C73M3=yCONFIG_VIDEO_S5K4ECGX=mCONFIG_VIDEO_S5K5BAF=mCONFIG_VIDEO_S5K6A3=mCONFIG_VIDEO_S5K6AA=yCONFIG_VIDEO_SR030PC30=yCONFIG_VIDEO_VS6624=mCONFIG_VIDEO_ET8EK8=yCONFIG_VIDEO_M5MOLS=m
# end of Camera sensor devices
#
# Lens drivers
#CONFIG_VIDEO_AD5820=yCONFIG_VIDEO_AK7375=yCONFIG_VIDEO_DW9714=mCONFIG_VIDEO_DW9768=y
# CONFIG_VIDEO_DW9807_VCM is not set
# end of Lens drivers
#
# Flash devices
#
# CONFIG_VIDEO_ADP1653 is not setCONFIG_VIDEO_LM3560=yCONFIG_VIDEO_LM3646=m
# end of Flash devices
#
# Audio decoders, processors and mixers
#
# CONFIG_VIDEO_CS3308 is not set
# CONFIG_VIDEO_CS5345 is not setCONFIG_VIDEO_CS53L32A=yCONFIG_VIDEO_MSP3400=mCONFIG_VIDEO_SONY_BTF_MPX=y
# CONFIG_VIDEO_TDA7432 is not setCONFIG_VIDEO_TDA9840=m
# CONFIG_VIDEO_TEA6415C is not setCONFIG_VIDEO_TEA6420=yCONFIG_VIDEO_TLV320AIC23B=yCONFIG_VIDEO_TVAUDIO=y
# CONFIG_VIDEO_UDA1342 is not set
# CONFIG_VIDEO_VP27SMPX is not setCONFIG_VIDEO_WM8739=mCONFIG_VIDEO_WM8775=m
# end of Audio decoders, processors and mixers
#
# RDS decoders
#CONFIG_VIDEO_SAA6588=y
# end of RDS decoders
#
# Video decoders
#CONFIG_VIDEO_ADV7180=m
# CONFIG_VIDEO_ADV7183 is not setCONFIG_VIDEO_ADV7604=yCONFIG_VIDEO_ADV7604_CEC=yCONFIG_VIDEO_ADV7842=y
# CONFIG_VIDEO_ADV7842_CEC is not setCONFIG_VIDEO_BT819=mCONFIG_VIDEO_BT856=yCONFIG_VIDEO_BT866=yCONFIG_VIDEO_KS0127=mCONFIG_VIDEO_ML86V7667=mCONFIG_VIDEO_SAA7110=yCONFIG_VIDEO_SAA711X=yCONFIG_VIDEO_TC358743=m
# CONFIG_VIDEO_TC358743_CEC is not setCONFIG_VIDEO_TVP514X=y
# CONFIG_VIDEO_TVP5150 is not set
# CONFIG_VIDEO_TVP7002 is not setCONFIG_VIDEO_TW2804=yCONFIG_VIDEO_TW9903=mCONFIG_VIDEO_TW9906=y
# CONFIG_VIDEO_TW9910 is not setCONFIG_VIDEO_VPX3220=m
#
# Video and audio decoders
#CONFIG_VIDEO_SAA717X=mCONFIG_VIDEO_CX25840=m
# end of Video decoders
#
# Video encoders
#CONFIG_VIDEO_AD9389B=m
# CONFIG_VIDEO_ADV7170 is not set
# CONFIG_VIDEO_ADV7175 is not setCONFIG_VIDEO_ADV7343=mCONFIG_VIDEO_ADV7393=mCONFIG_VIDEO_ADV7511=m
# CONFIG_VIDEO_ADV7511_CEC is not set
# CONFIG_VIDEO_AK881X is not set
# CONFIG_VIDEO_SAA7127 is not setCONFIG_VIDEO_SAA7185=yCONFIG_VIDEO_THS8200=y
# end of Video encoders
#
# Video improvement chips
#
# CONFIG_VIDEO_UPD64031A is not set
# CONFIG_VIDEO_UPD64083 is not set
# end of Video improvement chips
#
# Audio/Video compression chips
#
# CONFIG_VIDEO_SAA6752HS is not set
# end of Audio/Video compression chips
#
# SDR tuner chips
#CONFIG_SDR_MAX2175=m
# end of SDR tuner chips
#
# Miscellaneous helper chips
#CONFIG_VIDEO_I2C=mCONFIG_VIDEO_M52790=yCONFIG_VIDEO_ST_MIPID02=mCONFIG_VIDEO_THS7303=y
# end of Miscellaneous helper chips
#
# Media SPI Adapters
#
# CONFIG_CXD2880_SPI_DRV is not setCONFIG_VIDEO_GS1662=y
# end of Media SPI Adapters
CONFIG_MEDIA_TUNER=y
#
# Customize TV tuners
#CONFIG_MEDIA_TUNER_E4000=mCONFIG_MEDIA_TUNER_FC0011=mCONFIG_MEDIA_TUNER_FC0012=yCONFIG_MEDIA_TUNER_FC0013=mCONFIG_MEDIA_TUNER_FC2580=yCONFIG_MEDIA_TUNER_IT913X=m
# CONFIG_MEDIA_TUNER_M88RS6000T is not setCONFIG_MEDIA_TUNER_MAX2165=yCONFIG_MEDIA_TUNER_MC44S803=yCONFIG_MEDIA_TUNER_MSI001=yCONFIG_MEDIA_TUNER_MT2060=mCONFIG_MEDIA_TUNER_MT2063=mCONFIG_MEDIA_TUNER_MT20XX=y
# CONFIG_MEDIA_TUNER_MT2131 is not setCONFIG_MEDIA_TUNER_MT2266=mCONFIG_MEDIA_TUNER_MXL301RF=yCONFIG_MEDIA_TUNER_MXL5005S=mCONFIG_MEDIA_TUNER_MXL5007T=mCONFIG_MEDIA_TUNER_QM1D1B0004=yCONFIG_MEDIA_TUNER_QM1D1C0042=mCONFIG_MEDIA_TUNER_QT1010=yCONFIG_MEDIA_TUNER_R820T=y
# CONFIG_MEDIA_TUNER_SI2157 is not setCONFIG_MEDIA_TUNER_SIMPLE=yCONFIG_MEDIA_TUNER_TDA18212=mCONFIG_MEDIA_TUNER_TDA18218=yCONFIG_MEDIA_TUNER_TDA18250=yCONFIG_MEDIA_TUNER_TDA18271=yCONFIG_MEDIA_TUNER_TDA827X=yCONFIG_MEDIA_TUNER_TDA8290=yCONFIG_MEDIA_TUNER_TDA9887=yCONFIG_MEDIA_TUNER_TEA5761=yCONFIG_MEDIA_TUNER_TEA5767=m
# CONFIG_MEDIA_TUNER_TUA9001 is not setCONFIG_MEDIA_TUNER_XC2028=yCONFIG_MEDIA_TUNER_XC4000=yCONFIG_MEDIA_TUNER_XC5000=y
# end of Customize TV tuners
#
# Customise DVB Frontends
#
#
# Multistandard (satellite) frontends
#CONFIG_DVB_M88DS3103=mCONFIG_DVB_MXL5XX=mCONFIG_DVB_STB0899=mCONFIG_DVB_STB6100=y
CONFIG_DVB_STV090x=mCONFIG_DVB_STV0910=y
CONFIG_DVB_STV6110x=mCONFIG_DVB_STV6111=y
#
# Multistandard (cable + terrestrial) frontends
#CONFIG_DVB_DRXK=yCONFIG_DVB_MN88472=mCONFIG_DVB_MN88473=mCONFIG_DVB_SI2165=mCONFIG_DVB_TDA18271C2DD=y
#
# DVB-S (satellite) frontends
#
# CONFIG_DVB_CX24110 is not setCONFIG_DVB_CX24116=yCONFIG_DVB_CX24117=yCONFIG_DVB_CX24120=yCONFIG_DVB_CX24123=yCONFIG_DVB_DS3000=yCONFIG_DVB_MB86A16=mCONFIG_DVB_MT312=yCONFIG_DVB_S5H1420=yCONFIG_DVB_SI21XX=mCONFIG_DVB_STB6000=mCONFIG_DVB_STV0288=mCONFIG_DVB_STV0299=yCONFIG_DVB_STV0900=yCONFIG_DVB_STV6110=m
# CONFIG_DVB_TDA10071 is not setCONFIG_DVB_TDA10086=mCONFIG_DVB_TDA8083=mCONFIG_DVB_TDA8261=mCONFIG_DVB_TDA826X=mCONFIG_DVB_TS2020=m
# CONFIG_DVB_TUA6100 is not setCONFIG_DVB_TUNER_CX24113=yCONFIG_DVB_TUNER_ITD1000=yCONFIG_DVB_VES1X93=m
# CONFIG_DVB_ZL10036 is not setCONFIG_DVB_ZL10039=m
#
# DVB-T (terrestrial) frontends
#CONFIG_DVB_AF9013=mCONFIG_DVB_AS102_FE=yCONFIG_DVB_CX22700=y
# CONFIG_DVB_CX22702 is not set
# CONFIG_DVB_CXD2820R is not setCONFIG_DVB_CXD2841ER=mCONFIG_DVB_DIB3000MB=yCONFIG_DVB_DIB3000MC=yCONFIG_DVB_DIB7000M=yCONFIG_DVB_DIB7000P=mCONFIG_DVB_DIB9000=yCONFIG_DVB_DRXD=yCONFIG_DVB_EC100=y
# CONFIG_DVB_L64781 is not setCONFIG_DVB_MT352=y
# CONFIG_DVB_NXT6000 is not setCONFIG_DVB_RTL2830=yCONFIG_DVB_RTL2832=yCONFIG_DVB_RTL2832_SDR=yCONFIG_DVB_S5H1432=mCONFIG_DVB_SI2168=yCONFIG_DVB_SP887X=yCONFIG_DVB_STV0367=yCONFIG_DVB_TDA10048=m
# CONFIG_DVB_TDA1004X is not setCONFIG_DVB_ZD1301_DEMOD=yCONFIG_DVB_ZL10353=m
# CONFIG_DVB_CXD2880 is not set
#
# DVB-C (cable) frontends
#CONFIG_DVB_STV0297=yCONFIG_DVB_TDA10021=mCONFIG_DVB_TDA10023=mCONFIG_DVB_VES1820=y
#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends #CONFIG_DVB_AU8522=mCONFIG_DVB_AU8522_DTV=mCONFIG_DVB_AU8522_V4L=mCONFIG_DVB_BCM3510=y
# CONFIG_DVB_LG2160 is not setCONFIG_DVB_LGDT3305=mCONFIG_DVB_LGDT3306A=yCONFIG_DVB_LGDT330X=y
# CONFIG_DVB_MXL692 is not setCONFIG_DVB_NXT200X=yCONFIG_DVB_OR51132=yCONFIG_DVB_OR51211=yCONFIG_DVB_S5H1409=mCONFIG_DVB_S5H1411=y
#
# ISDB-T (terrestrial) frontends
#CONFIG_DVB_DIB8000=mCONFIG_DVB_MB86A20S=yCONFIG_DVB_S921=m
#
# ISDB-S (satellite) & ISDB-T (terrestrial) frontends #
# CONFIG_DVB_MN88443X is not set
# CONFIG_DVB_TC90522 is not set
#
# Digital terrestrial only tuners/PLL
#CONFIG_DVB_PLL=yCONFIG_DVB_TUNER_DIB0070=yCONFIG_DVB_TUNER_DIB0090=m
#
# SEC control devices for DVB-S
#CONFIG_DVB_A8293=y
# CONFIG_DVB_AF9033 is not setCONFIG_DVB_ASCOT2E=m
# CONFIG_DVB_ATBM8830 is not set
# CONFIG_DVB_HELENE is not set
# CONFIG_DVB_HORUS3A is not setCONFIG_DVB_ISL6405=yCONFIG_DVB_ISL6421=yCONFIG_DVB_ISL6423=mCONFIG_DVB_IX2505V=yCONFIG_DVB_LGS8GL5=mCONFIG_DVB_LGS8GXX=y
# CONFIG_DVB_LNBH25 is not set
# CONFIG_DVB_LNBH29 is not setCONFIG_DVB_LNBP21=yCONFIG_DVB_LNBP22=mCONFIG_DVB_M88RS2000=y
CONFIG_DVB_TDA665x=yCONFIG_DVB_DRX39XYJ=y
#
# Common Interface (EN50221) controller drivers
#CONFIG_DVB_CXD2099=yCONFIG_DVB_SP2=m
# end of Customise DVB Frontends
#
# Tools to develop new frontends
#CONFIG_DVB_DUMMY_FE=y
# end of Media ancillary drivers
#
# Graphics support
#CONFIG_APERTURE_HELPERS=yCONFIG_IMX_IPUV3_CORE=yCONFIG_DRM=yCONFIG_DRM_MIPI_DBI=yCONFIG_DRM_MIPI_DSI=y
# CONFIG_DRM_DEBUG_MM is not setCONFIG_DRM_KMS_HELPER=yCONFIG_DRM_DEBUG_DP_MST_TOPOLOGY_REFS=yCONFIG_DRM_DEBUG_MODESET_LOCK=yCONFIG_DRM_FBDEV_EMULATION=yCONFIG_DRM_FBDEV_OVERALLOC=100CONFIG_DRM_FBDEV_LEAK_PHYS_SMEM=yCONFIG_DRM_LOAD_EDID_FIRMWARE=yCONFIG_DRM_GEM_DMA_HELPER=yCONFIG_DRM_GEM_SHMEM_HELPER=yCONFIG_DRM_SCHED=m
#
# I2C encoder or helper chips
#CONFIG_DRM_I2C_CH7006=yCONFIG_DRM_I2C_SIL164=mCONFIG_DRM_I2C_NXP_TDA998X=m
# CONFIG_DRM_I2C_NXP_TDA9950 is not set
# end of I2C encoder or helper chips
#
# ARM devices
#
# end of ARM devices
CONFIG_DRM_KMB_DISPLAY=mCONFIG_DRM_VGEM=y
# CONFIG_DRM_VKMS is not set
# CONFIG_DRM_UDL is not setCONFIG_DRM_VIRTIO_GPU=mCONFIG_DRM_PANEL=y
#
# Display Panels
#CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN=mCONFIG_DRM_PANEL_WIDECHIPS_WS2401=m
# end of Display Panels
CONFIG_DRM_BRIDGE=yCONFIG_DRM_PANEL_BRIDGE=y
#
# Display Interface Bridges
#
# CONFIG_DRM_ANALOGIX_ANX78XX is not set
# end of Display Interface Bridges
CONFIG_DRM_IMX=yCONFIG_DRM_IMX_PARALLEL_DISPLAY=yCONFIG_DRM_ETNAVIV=mCONFIG_DRM_ETNAVIV_THERMAL=yCONFIG_DRM_LOGICVC=y
# CONFIG_DRM_GM12U320 is not setCONFIG_DRM_PANEL_MIPI_DBI=yCONFIG_DRM_SIMPLEDRM=y
# CONFIG_TINYDRM_HX8357D is not set
# CONFIG_TINYDRM_ILI9163 is not set
# CONFIG_TINYDRM_ILI9225 is not set
# CONFIG_TINYDRM_ILI9341 is not set
# CONFIG_TINYDRM_ILI9486 is not setCONFIG_TINYDRM_MI0283QT=mCONFIG_TINYDRM_REPAPER=m
# CONFIG_TINYDRM_ST7586 is not setCONFIG_TINYDRM_ST7735R=yCONFIG_DRM_GUD=yCONFIG_DRM_SSD130X=m
# CONFIG_DRM_SSD130X_I2C is not setCONFIG_DRM_SSD130X_SPI=mCONFIG_DRM_LEGACY=yCONFIG_DRM_PANEL_ORIENTATION_QUIRKS=yCONFIG_DRM_NOMODESET=y
#
# Frame buffer Devices
#CONFIG_FB_CMDLINE=yCONFIG_FB_NOTIFY=yCONFIG_FB=yCONFIG_FIRMWARE_EDID=yCONFIG_FB_CFB_FILLRECT=yCONFIG_FB_CFB_COPYAREA=yCONFIG_FB_CFB_IMAGEBLIT=yCONFIG_FB_SYS_FILLRECT=yCONFIG_FB_SYS_COPYAREA=yCONFIG_FB_SYS_IMAGEBLIT=yCONFIG_FB_FOREIGN_ENDIAN=yCONFIG_FB_BOTH_ENDIAN=y
# CONFIG_FB_BIG_ENDIAN is not set
# CONFIG_FB_LITTLE_ENDIAN is not setCONFIG_FB_SYS_FOPS=yCONFIG_FB_DEFERRED_IO=yCONFIG_FB_MODE_HELPERS=yCONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CLPS711X is not setCONFIG_FB_ARC=m
# CONFIG_FB_CONTROL is not setCONFIG_FB_UVESA=y
# CONFIG_FB_GBE is not set
# CONFIG_FB_PVR2 is not setCONFIG_FB_OPENCORES=y
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_WM8505 is not set
# CONFIG_FB_W100 is not set
# CONFIG_FB_TMIO is not setCONFIG_FB_SM501=m
# CONFIG_FB_SMSCUFX is not setCONFIG_FB_UDL=mCONFIG_FB_IBM_GXT4500=mCONFIG_FB_GOLDFISH=y
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_BROADSHEET is not set
# CONFIG_FB_SSD1307 is not set
# CONFIG_MMP_DISP is not set
# end of Frame buffer Devices
#
# Backlight & LCD device support
#CONFIG_LCD_CLASS_DEVICE=mCONFIG_LCD_L4F00242T03=m
# CONFIG_LCD_LMS283GF05 is not setCONFIG_LCD_LTV350QV=mCONFIG_LCD_ILI922X=mCONFIG_LCD_ILI9320=m
# CONFIG_LCD_TDO24M is not setCONFIG_LCD_VGG2432A4=m
# CONFIG_LCD_PLATFORM is not setCONFIG_LCD_AMS369FG06=mCONFIG_LCD_LMS501KF03=mCONFIG_LCD_HX8357=m
# CONFIG_LCD_OTM3225A is not setCONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_KTD253 is not set
# CONFIG_BACKLIGHT_LM3533 is not setCONFIG_BACKLIGHT_OMAP1=m
# CONFIG_BACKLIGHT_PWM is not set
# CONFIG_BACKLIGHT_DA9052 is not setCONFIG_BACKLIGHT_MAX8925=yCONFIG_BACKLIGHT_MT6370=y
# CONFIG_BACKLIGHT_QCOM_WLED is not setCONFIG_BACKLIGHT_RT4831=mCONFIG_BACKLIGHT_WM831X=yCONFIG_BACKLIGHT_ADP5520=y
# CONFIG_BACKLIGHT_ADP8860 is not setCONFIG_BACKLIGHT_ADP8870=mCONFIG_BACKLIGHT_AAT2870=yCONFIG_BACKLIGHT_LM3630A=yCONFIG_BACKLIGHT_LM3639=mCONFIG_BACKLIGHT_LP855X=yCONFIG_BACKLIGHT_PANDORA=mCONFIG_BACKLIGHT_AS3711=yCONFIG_BACKLIGHT_GPIO=yCONFIG_BACKLIGHT_LV5207LP=yCONFIG_BACKLIGHT_BD6107=y
# CONFIG_BACKLIGHT_ARCXCNN is not setCONFIG_BACKLIGHT_RAVE_SP=m
# end of Backlight & LCD device support
CONFIG_VIDEOMODE_HELPERS=yCONFIG_HDMI=y
#
# Console display driver support
#CONFIG_VGA_CONSOLE=yCONFIG_DUMMY_CONSOLE=y CONFIG_DUMMY_CONSOLE_COLUMNS=80 CONFIG_DUMMY_CONSOLE_ROWS=25 CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_LEGACY_ACCELERATION is not set CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y CONFIG_FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER=y
# end of Console display driver support
CONFIG_LOGO=yCONFIG_LOGO_LINUX_MONO=y
# CONFIG_LOGO_LINUX_VGA16 is not set
# CONFIG_LOGO_LINUX_CLUT224 is not set
# end of Graphics support
# CONFIG_SOUND is not set
#
# HID support
#CONFIG_HID=yCONFIG_HID_BATTERY_STRENGTH=y
# CONFIG_HIDRAW is not set
# CONFIG_UHID is not set
# CONFIG_HID_GENERIC is not set
#
# Special HID drivers
#
# CONFIG_HID_A4TECH is not set
# CONFIG_HID_ACCUTOUCH is not setCONFIG_HID_ACRUX=y
# CONFIG_HID_ACRUX_FF is not setCONFIG_HID_APPLE=yCONFIG_HID_APPLEIR=y
# CONFIG_HID_ASUS is not set
# CONFIG_HID_AUREAL is not setCONFIG_HID_BELKIN=m
# CONFIG_HID_BETOP_FF is not setCONFIG_HID_BIGBEN_FF=yCONFIG_HID_CHERRY=y
# CONFIG_HID_CHICONY is not setCONFIG_HID_CORSAIR=yCONFIG_HID_COUGAR=mCONFIG_HID_MACALLY=y
# CONFIG_HID_CMEDIA is not setCONFIG_HID_CREATIVE_SB0540=yCONFIG_HID_CYPRESS=mCONFIG_HID_DRAGONRISE=y
# CONFIG_DRAGONRISE_FF is not set
# CONFIG_HID_EMS_FF is not setCONFIG_HID_ELAN=y
# CONFIG_HID_ELECOM is not setCONFIG_HID_ELO=mCONFIG_HID_EZKEY=mCONFIG_HID_GEMBIRD=mCONFIG_HID_GFRM=mCONFIG_HID_GLORIOUS=m
# CONFIG_HID_HOLTEK is not setCONFIG_HID_VIVALDI_COMMON=yCONFIG_HID_VIVALDI=y
# CONFIG_HID_GT683R is not set
# CONFIG_HID_KEYTOUCH is not setCONFIG_HID_KYE=yCONFIG_HID_UCLOGIC=yCONFIG_HID_WALTOP=yCONFIG_HID_VIEWSONIC=yCONFIG_HID_VRC2=yCONFIG_HID_XIAOMI=m
# CONFIG_HID_GYRATION is not setCONFIG_HID_ICADE=yCONFIG_HID_ITE=mCONFIG_HID_JABRA=y
# CONFIG_HID_TWINHAN is not setCONFIG_HID_KENSINGTON=yCONFIG_HID_LCPOWER=yCONFIG_HID_LED=mCONFIG_HID_LENOVO=yCONFIG_HID_LETSKETCH=mCONFIG_HID_LOGITECH=mCONFIG_HID_LOGITECH_HIDPP=m
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not setCONFIG_LOGIG940_FF=yCONFIG_LOGIWHEELS_FF=yCONFIG_HID_MAGICMOUSE=m
# CONFIG_HID_MALTRON is not setCONFIG_HID_MAYFLASH=yCONFIG_HID_MEGAWORLD_FF=mCONFIG_HID_REDRAGON=yCONFIG_HID_MICROSOFT=yCONFIG_HID_MONTEREY=mCONFIG_HID_MULTITOUCH=mCONFIG_HID_NINTENDO=m
# CONFIG_NINTENDO_FF is not setCONFIG_HID_NTI=mCONFIG_HID_NTRIG=mCONFIG_HID_ORTEK=mCONFIG_HID_PANTHERLORD=m
# CONFIG_PANTHERLORD_FF is not setCONFIG_HID_PENMOUNT=m
# CONFIG_HID_PETALYNX is not setCONFIG_HID_PICOLCD=y
# CONFIG_HID_PICOLCD_FB is not setCONFIG_HID_PICOLCD_BACKLIGHT=y
# CONFIG_HID_PICOLCD_LEDS is not set
# CONFIG_HID_PLANTRONICS is not setCONFIG_HID_PXRC=yCONFIG_HID_RAZER=m
# CONFIG_HID_PRIMAX is not setCONFIG_HID_RETRODE=y
# CONFIG_HID_ROCCAT is not set
# CONFIG_HID_SAITEK is not setCONFIG_HID_SAMSUNG=yCONFIG_HID_SEMITEK=yCONFIG_HID_SIGMAMICRO=yCONFIG_HID_SONY=yCONFIG_SONY_FF=yCONFIG_HID_SPEEDLINK=y
# CONFIG_HID_STEAM is not setCONFIG_HID_STEELSERIES=y
# CONFIG_HID_SUNPLUS is not setCONFIG_HID_RMI=y
# CONFIG_HID_GREENASIA is not setCONFIG_HID_SMARTJOYPLUS=yCONFIG_SMARTJOYPLUS_FF=yCONFIG_HID_TIVO=yCONFIG_HID_TOPSEED=y
# CONFIG_HID_TOPRE is not setCONFIG_HID_THINGM=mCONFIG_HID_THRUSTMASTER=yCONFIG_THRUSTMASTER_FF=y
# CONFIG_HID_UDRAW_PS3 is not setCONFIG_HID_WACOM=yCONFIG_HID_WIIMOTE=m
# CONFIG_HID_XINMO is not set
# CONFIG_HID_ZEROPLUS is not setCONFIG_HID_ZYDACRON=mCONFIG_HID_SENSOR_HUB=mCONFIG_HID_SENSOR_CUSTOM_SENSOR=m
# CONFIG_HID_ALPS is not setCONFIG_HID_MCP2221=m
# end of Special HID drivers
#
# USB HID support
#CONFIG_USB_HID=yCONFIG_HID_PID=y
# CONFIG_USB_HIDDEV is not set
# end of USB HID support
#
# I2C HID support
#
# end of I2C HID support # end of HID support
CONFIG_USB_OHCI_LITTLE_ENDIAN=yCONFIG_USB_SUPPORT=yCONFIG_USB_COMMON=y
# CONFIG_USB_LED_TRIG is not setCONFIG_USB_ULPI_BUS=mCONFIG_USB_CONN_GPIO=mCONFIG_USB_ARCH_HAS_HCD=yCONFIG_USB=yCONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#CONFIG_USB_DEFAULT_PERSIST=yCONFIG_USB_FEW_INIT_RETRIES=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG_PRODUCTLIST is not setCONFIG_USB_OTG_DISABLE_EXTERNAL_HUB=yCONFIG_USB_LEDS_TRIGGER_USBPORT=mCONFIG_USB_AUTOSUSPEND_DELAY=2
# CONFIG_USB_MON is not set
#
# USB Host Controller Drivers
#CONFIG_USB_C67X00_HCD=y
# CONFIG_USB_XHCI_HCD is not setCONFIG_USB_EHCI_BRCMSTB=yCONFIG_USB_BRCMSTB=yCONFIG_USB_EHCI_HCD=yCONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not setCONFIG_USB_EHCI_FSL=mCONFIG_USB_EHCI_HCD_NPCM7XX=yCONFIG_USB_EHCI_HCD_OMAP=mCONFIG_USB_EHCI_HCD_ORION=yCONFIG_USB_EHCI_HCD_SPEAR=mCONFIG_USB_EHCI_HCD_AT91=yCONFIG_USB_EHCI_SH=yCONFIG_USB_EHCI_EXYNOS=yCONFIG_USB_EHCI_MV=m
# CONFIG_USB_CNS3XXX_EHCI is not setCONFIG_USB_EHCI_HCD_PLATFORM=mCONFIG_USB_OXU210HP_HCD=yCONFIG_USB_ISP116X_HCD=mCONFIG_USB_ISP1362_HCD=yCONFIG_USB_FOTG210_HCD=m
# CONFIG_USB_MAX3421_HCD is not setCONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_HCD_SPEAR is not set
# CONFIG_USB_OHCI_HCD_S3C2410 is not set
# CONFIG_USB_OHCI_HCD_LPC32XX is not setCONFIG_USB_OHCI_HCD_OMAP3=mCONFIG_USB_OHCI_HCD_DAVINCI=mCONFIG_USB_OHCI_HCD_SSB=y
# CONFIG_USB_OHCI_SH is not setCONFIG_USB_OHCI_EXYNOS=m
# CONFIG_USB_CNS3XXX_OHCI is not setCONFIG_USB_OHCI_HCD_PLATFORM=mCONFIG_USB_U132_HCD=mCONFIG_USB_SL811_HCD=y
# CONFIG_USB_SL811_HCD_ISO is not setCONFIG_USB_R8A66597_HCD=y
# CONFIG_USB_RENESAS_USBHS_HCD is not setCONFIG_USB_HCD_BCMA=mCONFIG_USB_HCD_SSB=m
# CONFIG_USB_HCD_TEST_MODE is not setCONFIG_USB_RENESAS_USBHS=y
#
# USB Device Class drivers
#CONFIG_USB_ACM=mCONFIG_USB_PRINTER=yCONFIG_USB_WDM=yCONFIG_USB_TMC=y
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may #
#
# also be needed; see USB_STORAGE Help for more info #
#
# USB Imaging devices
#CONFIG_USB_MDC800=mCONFIG_USBIP_CORE=mCONFIG_USBIP_VHCI_HCD=mCONFIG_USBIP_VHCI_HC_PORTS=8CONFIG_USBIP_VHCI_NR_HCS=1CONFIG_USBIP_HOST=mCONFIG_USBIP_VUDC=m
# CONFIG_USBIP_DEBUG is not set
# CONFIG_USB_CDNS_SUPPORT is not setCONFIG_USB_MTU3=yCONFIG_USB_MTU3_HOST=y
# CONFIG_USB_MTU3_GADGET is not set
# CONFIG_USB_MTU3_DUAL_ROLE is not set
# CONFIG_USB_MTU3_DEBUG is not setCONFIG_USB_MUSB_HDRC=y
# CONFIG_USB_MUSB_HOST is not setCONFIG_USB_MUSB_GADGET=y
# CONFIG_USB_MUSB_DUAL_ROLE is not set
#
# Platform Glue Layer
#CONFIG_USB_MUSB_UX500=y
# CONFIG_USB_MUSB_MEDIATEK is not set
# CONFIG_USB_MUSB_POLARFIRE_SOC is not set
#
# MUSB DMA mode
#CONFIG_MUSB_PIO_ONLY=yCONFIG_USB_DWC3=m
# CONFIG_USB_DWC3_ULPI is not set
# CONFIG_USB_DWC3_HOST is not set
# CONFIG_USB_DWC3_GADGET is not setCONFIG_USB_DWC3_DUAL_ROLE=y
#
# Platform Glue Driver Support
#CONFIG_USB_DWC3_KEYSTONE=m
# CONFIG_USB_DWC3_AM62 is not set
# CONFIG_USB_DWC2 is not set
# CONFIG_USB_CHIPIDEA is not setCONFIG_USB_ISP1760=yCONFIG_USB_ISP1760_HCD=yCONFIG_USB_ISP1761_UDC=y
# CONFIG_USB_ISP1760_HOST_ROLE is not set
# CONFIG_USB_ISP1760_GADGET_ROLE is not setCONFIG_USB_ISP1760_DUAL_ROLE=y
#
# USB port drivers
#CONFIG_USB_SERIAL=yCONFIG_USB_SERIAL_CONSOLE=yCONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_SIMPLE is not setCONFIG_USB_SERIAL_AIRCABLE=yCONFIG_USB_SERIAL_ARK3116=m
# CONFIG_USB_SERIAL_BELKIN is not setCONFIG_USB_SERIAL_CH341=mCONFIG_USB_SERIAL_WHITEHEAT=mCONFIG_USB_SERIAL_DIGI_ACCELEPORT=mCONFIG_USB_SERIAL_CP210X=mCONFIG_USB_SERIAL_CYPRESS_M8=mCONFIG_USB_SERIAL_EMPEG=y
# CONFIG_USB_SERIAL_FTDI_SIO is not setCONFIG_USB_SERIAL_VISOR=y
# CONFIG_USB_SERIAL_IPAQ is not setCONFIG_USB_SERIAL_IR=m
# CONFIG_USB_SERIAL_EDGEPORT is not setCONFIG_USB_SERIAL_EDGEPORT_TI=yCONFIG_USB_SERIAL_F81232=yCONFIG_USB_SERIAL_F8153X=yCONFIG_USB_SERIAL_GARMIN=m
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_IUU is not setCONFIG_USB_SERIAL_KEYSPAN_PDA=y
# CONFIG_USB_SERIAL_KEYSPAN is not setCONFIG_USB_SERIAL_KLSI=m
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not setCONFIG_USB_SERIAL_METRO=mCONFIG_USB_SERIAL_MOS7720=yCONFIG_USB_SERIAL_MOS7840=mCONFIG_USB_SERIAL_MXUPORT=mCONFIG_USB_SERIAL_NAVMAN=mCONFIG_USB_SERIAL_PL2303=m
# CONFIG_USB_SERIAL_OTI6858 is not setCONFIG_USB_SERIAL_QCAUX=mCONFIG_USB_SERIAL_QUALCOMM=mCONFIG_USB_SERIAL_SPCP8X5=m
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not setCONFIG_USB_SERIAL_SYMBOL=mCONFIG_USB_SERIAL_TI=y
# CONFIG_USB_SERIAL_CYBERJACK is not setCONFIG_USB_SERIAL_WWAN=yCONFIG_USB_SERIAL_OPTION=yCONFIG_USB_SERIAL_OMNINET=yCONFIG_USB_SERIAL_OPTICON=mCONFIG_USB_SERIAL_XSENS_MT=mCONFIG_USB_SERIAL_WISHBONE=m
# CONFIG_USB_SERIAL_SSU100 is not setCONFIG_USB_SERIAL_QT2=mCONFIG_USB_SERIAL_UPD78F0730=yCONFIG_USB_SERIAL_XR=mCONFIG_USB_SERIAL_DEBUG=y
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not setCONFIG_USB_EMI26=y
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not setCONFIG_USB_LEGOTOWER=mCONFIG_USB_LCD=mCONFIG_USB_CYPRESS_CY7C63=yCONFIG_USB_CYTHERM=m
# CONFIG_USB_IDMOUSE is not setCONFIG_USB_FTDI_ELAN=m
# CONFIG_USB_APPLEDISPLAY is not setCONFIG_USB_QCOM_EUD=yCONFIG_APPLE_MFI_FASTCHARGE=mCONFIG_USB_SISUSBVGA=m
# CONFIG_USB_LD is not setCONFIG_USB_TRANCEVIBRATOR=mCONFIG_USB_IOWARRIOR=mCONFIG_USB_TEST=yCONFIG_USB_EHSET_TEST_FIXTURE=m
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_YUREX is not setCONFIG_USB_EZUSB_FX2=yCONFIG_USB_HUB_USB251XB=y
# CONFIG_USB_HSIC_USB3503 is not setCONFIG_USB_HSIC_USB4604=mCONFIG_USB_LINK_LAYER_TEST=y
# CONFIG_BRCM_USB_PINMAP is not setCONFIG_USB_ONBOARD_HUB=yCONFIG_USB_ATM=mCONFIG_USB_SPEEDTOUCH=mCONFIG_USB_CXACRU=mCONFIG_USB_UEAGLEATM=m
# CONFIG_USB_XUSBATM is not set
#
# USB Physical Layer drivers
#CONFIG_USB_PHY=y
# CONFIG_KEYSTONE_USB_PHY is not setCONFIG_NOP_USB_XCEIV=mCONFIG_AM335X_CONTROL_USB=mCONFIG_AM335X_PHY_USB=m
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_TAHVO_USB is not setCONFIG_USB_ISP1301=yCONFIG_USB_TEGRA_PHY=yCONFIG_USB_ULPI=yCONFIG_USB_ULPI_VIEWPORT=y
# CONFIG_JZ4770_PHY is not set
# end of USB Physical Layer drivers
CONFIG_USB_GADGET=yCONFIG_USB_GADGET_DEBUG=yCONFIG_USB_GADGET_VERBOSE=y
# CONFIG_USB_GADGET_DEBUG_FS is not setCONFIG_USB_GADGET_VBUS_DRAW=2CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2CONFIG_U_SERIAL_CONSOLE=y
#
# USB Peripheral Controller
#CONFIG_USB_LPC32XX=m
# CONFIG_USB_FUSB300 is not setCONFIG_USB_FOTG210_UDC=y
# CONFIG_USB_GR_UDC is not set
# CONFIG_USB_R8A66597 is not setCONFIG_USB_RENESAS_USBHS_UDC=yCONFIG_USB_RENESAS_USB3=yCONFIG_USB_PXA27X=mCONFIG_USB_MV_UDC=yCONFIG_USB_MV_U3D=yCONFIG_USB_M66592=y
# CONFIG_USB_BDC_UDC is not setCONFIG_USB_NET2272=m
# CONFIG_USB_NET2272_DMA is not setCONFIG_USB_GADGET_XILINX=mCONFIG_USB_MAX3420_UDC=mCONFIG_USB_ASPEED_UDC=yCONFIG_USB_ASPEED_VHUB=yCONFIG_USB_DUMMY_HCD=m
# end of USB Peripheral Controller
CONFIG_USB_LIBCOMPOSITE=yCONFIG_USB_F_ACM=yCONFIG_USB_U_SERIAL=yCONFIG_USB_U_ETHER=yCONFIG_USB_F_SERIAL=yCONFIG_USB_F_OBEX=yCONFIG_USB_F_ECM=yCONFIG_USB_F_SUBSET=yCONFIG_USB_F_RNDIS=yCONFIG_USB_F_FS=yCONFIG_USB_F_UVC=mCONFIG_USB_F_PRINTER=m
# CONFIG_USB_CONFIGFS is not set
#
# USB Gadget precomposed configurations
#
# CONFIG_USB_ZERO is not setCONFIG_USB_ETH=y
# CONFIG_USB_ETH_RNDIS is not set
# CONFIG_USB_ETH_EEM is not set
# CONFIG_USB_G_NCM is not setCONFIG_USB_GADGETFS=mCONFIG_USB_FUNCTIONFS=yCONFIG_USB_FUNCTIONFS_ETH=yCONFIG_USB_FUNCTIONFS_RNDIS=yCONFIG_USB_FUNCTIONFS_GENERIC=yCONFIG_USB_G_SERIAL=yCONFIG_USB_G_PRINTER=mCONFIG_USB_CDC_COMPOSITE=m
# CONFIG_USB_G_HID is not set
# CONFIG_USB_G_DBGP is not setCONFIG_USB_G_WEBCAM=mCONFIG_USB_RAW_GADGET=m
# end of USB Gadget precomposed configurations
CONFIG_TYPEC=m
# CONFIG_TYPEC_TCPM is not setCONFIG_TYPEC_UCSI=m
# CONFIG_UCSI_CCG is not set
# CONFIG_UCSI_STM32G0 is not setCONFIG_TYPEC_TPS6598X=mCONFIG_TYPEC_ANX7411=mCONFIG_TYPEC_RT1719=mCONFIG_TYPEC_HD3SS3220=mCONFIG_TYPEC_STUSB160X=mCONFIG_TYPEC_QCOM_PMIC=mCONFIG_TYPEC_WUSB3801=m
#
# USB Type-C Multiplexer/DeMultiplexer Switch support #CONFIG_TYPEC_MUX_FSA4480=m
# CONFIG_TYPEC_MUX_PI3USB30532 is not set
# end of USB Type-C Multiplexer/DeMultiplexer Switch support
#
# USB Type-C Alternate Mode drivers
#CONFIG_TYPEC_DP_ALTMODE=m
# CONFIG_TYPEC_NVIDIA_ALTMODE is not set
# end of USB Type-C Alternate Mode drivers
CONFIG_USB_ROLE_SWITCH=yCONFIG_MMC=yCONFIG_SDIO_UART=mCONFIG_MMC_TEST=y
#
# MMC/SD/SDIO Host Controller Drivers
#CONFIG_MMC_DEBUG=y
# CONFIG_MMC_SDHCI is not setCONFIG_MMC_MOXART=yCONFIG_MMC_OMAP_HS=m
# CONFIG_MMC_DAVINCI is not setCONFIG_MMC_SPI=m
# CONFIG_MMC_S3C is not setCONFIG_MMC_TMIO_CORE=y
# CONFIG_MMC_TMIO is not setCONFIG_MMC_SDHI=y
# CONFIG_MMC_SDHI_SYS_DMAC is not setCONFIG_MMC_SDHI_INTERNAL_DMAC=mCONFIG_MMC_DW=yCONFIG_MMC_DW_PLTFM=yCONFIG_MMC_DW_BLUEFIELD=yCONFIG_MMC_DW_EXYNOS=mCONFIG_MMC_DW_HI3798CV200=mCONFIG_MMC_DW_K3=mCONFIG_MMC_SH_MMCIF=y
# CONFIG_MMC_VUB300 is not setCONFIG_MMC_USHC=y
# CONFIG_MMC_USDHI6ROL0 is not setCONFIG_MMC_REALTEK_USB=mCONFIG_MMC_CQHCI=m
# CONFIG_MMC_HSQ is not setCONFIG_MMC_BCM2835=mCONFIG_MMC_OWL=mCONFIG_MMC_LITEX=mCONFIG_MEMSTICK=m
# CONFIG_MEMSTICK_DEBUG is not set
#
# MemoryStick drivers
#
# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
#
# MemoryStick Host Controller Drivers
#CONFIG_MEMSTICK_REALTEK_USB=mCONFIG_NEW_LEDS=yCONFIG_LEDS_CLASS=yCONFIG_LEDS_CLASS_FLASH=m
# CONFIG_LEDS_CLASS_MULTICOLOR is not setCONFIG_LEDS_BRIGHTNESS_HW_CHANGED=y
#
# LED drivers
#
# CONFIG_LEDS_ARIEL is not setCONFIG_LEDS_LM3530=yCONFIG_LEDS_LM3532=mCONFIG_LEDS_LM3533=y
# CONFIG_LEDS_LM3642 is not set
# CONFIG_LEDS_MT6323 is not set
# CONFIG_LEDS_S3C24XX is not set
# CONFIG_LEDS_COBALT_QUBE is not setCONFIG_LEDS_COBALT_RAQ=y
# CONFIG_LEDS_PCA9532 is not setCONFIG_LEDS_GPIO=mCONFIG_LEDS_LP3944=mCONFIG_LEDS_LP3952=yCONFIG_LEDS_LP50XX=mCONFIG_LEDS_PCA955X=yCONFIG_LEDS_PCA955X_GPIO=yCONFIG_LEDS_PCA963X=yCONFIG_LEDS_WM831X_STATUS=yCONFIG_LEDS_DA9052=yCONFIG_LEDS_DAC124S085=yCONFIG_LEDS_PWM=mCONFIG_LEDS_REGULATOR=mCONFIG_LEDS_BD2802=m
# CONFIG_LEDS_LT3593 is not set
# CONFIG_LEDS_ADP5520 is not setCONFIG_LEDS_MC13783=m
# CONFIG_LEDS_NS2 is not setCONFIG_LEDS_TCA6507=mCONFIG_LEDS_TLC591XX=mCONFIG_LEDS_MAX8997=m
# CONFIG_LEDS_LM355x is not setCONFIG_LEDS_OT200=m
# CONFIG_LEDS_MENF21BMC is not set
# CONFIG_LEDS_IS31FL319X is not set
#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM) #CONFIG_LEDS_BLINKM=yCONFIG_LEDS_PM8058=m
# CONFIG_LEDS_MLXREG is not setCONFIG_LEDS_USER=m
# CONFIG_LEDS_TI_LMU_COMMON is not set
# CONFIG_LEDS_TPS6105X is not set
# CONFIG_LEDS_IP30 is not setCONFIG_LEDS_ACER_A500=m
#
# Flash and Torch LED drivers
#CONFIG_LEDS_AS3645A=m
# CONFIG_LEDS_LM3601X is not set
# CONFIG_LEDS_RT8515 is not setCONFIG_LEDS_SGM3140=m
#
# RGB LED drivers
#
#
# LED Triggers
#CONFIG_LEDS_TRIGGERS=yCONFIG_LEDS_TRIGGER_TIMER=yCONFIG_LEDS_TRIGGER_ONESHOT=mCONFIG_LEDS_TRIGGER_HEARTBEAT=yCONFIG_LEDS_TRIGGER_BACKLIGHT=yCONFIG_LEDS_TRIGGER_CPU=y
# CONFIG_LEDS_TRIGGER_ACTIVITY is not set
# CONFIG_LEDS_TRIGGER_GPIO is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
#
# iptables trigger is under Netfilter config (LED target) # CONFIG_LEDS_TRIGGER_TRANSIENT=y # CONFIG_LEDS_TRIGGER_CAMERA is not set CONFIG_LEDS_TRIGGER_PANIC=y CONFIG_LEDS_TRIGGER_NETDEV=m CONFIG_LEDS_TRIGGER_PATTERN=m # CONFIG_LEDS_TRIGGER_AUDIO is not set # CONFIG_LEDS_TRIGGER_TTY is not set
#
# Simple LED drivers
#CONFIG_ACCESSIBILITY=yCONFIG_A11Y_BRAILLE_CONSOLE=y
#
# Speakup console speech
#CONFIG_SPEAKUP=mCONFIG_SPEAKUP_SERIALIO=yCONFIG_SPEAKUP_SYNTH_ACNTSA=mCONFIG_SPEAKUP_SYNTH_ACNTPC=mCONFIG_SPEAKUP_SYNTH_APOLLO=mCONFIG_SPEAKUP_SYNTH_AUDPTR=mCONFIG_SPEAKUP_SYNTH_BNS=m
# CONFIG_SPEAKUP_SYNTH_DECTLK is not setCONFIG_SPEAKUP_SYNTH_DECEXT=mCONFIG_SPEAKUP_SYNTH_DECPC=mCONFIG_SPEAKUP_SYNTH_DTLK=mCONFIG_SPEAKUP_SYNTH_KEYPC=mCONFIG_SPEAKUP_SYNTH_LTLK=m
# CONFIG_SPEAKUP_SYNTH_SOFT is not setCONFIG_SPEAKUP_SYNTH_SPKOUT=mCONFIG_SPEAKUP_SYNTH_TXPRT=m
# CONFIG_SPEAKUP_SYNTH_DUMMY is not set
# end of Speakup console speech
CONFIG_INFINIBAND=yCONFIG_INFINIBAND_USER_MAD=yCONFIG_INFINIBAND_USER_ACCESS=mCONFIG_INFINIBAND_USER_MEM=y
# CONFIG_INFINIBAND_ON_DEMAND_PAGING is not setCONFIG_INFINIBAND_ADDR_TRANS=yCONFIG_INFINIBAND_ADDR_TRANS_CONFIGFS=yCONFIG_INFINIBAND_VIRT_DMA=yCONFIG_RDMA_SIW=mCONFIG_INFINIBAND_IPOIB=mCONFIG_INFINIBAND_IPOIB_CM=y
# CONFIG_INFINIBAND_IPOIB_DEBUG is not setCONFIG_INFINIBAND_RTRS=mCONFIG_INFINIBAND_RTRS_CLIENT=m
# CONFIG_INFINIBAND_RTRS_SERVER is not setCONFIG_RTC_LIB=yCONFIG_RTC_CLASS=yCONFIG_RTC_HCTOSYS=yCONFIG_RTC_HCTOSYS_DEVICE="rtc0"CONFIG_RTC_SYSTOHC=yCONFIG_RTC_SYSTOHC_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not setCONFIG_RTC_NVMEM=y
#
# RTC interfaces
#CONFIG_RTC_INTF_SYSFS=y
# CONFIG_RTC_INTF_DEV is not setCONFIG_RTC_DRV_TEST=m
#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_ABB5ZES3 is not setCONFIG_RTC_DRV_ABEOZ9=m
# CONFIG_RTC_DRV_ABX80X is not setCONFIG_RTC_DRV_BRCMSTB=m
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not setCONFIG_RTC_DRV_DS1672=y
# CONFIG_RTC_DRV_MAX6900 is not setCONFIG_RTC_DRV_MAX8907=y
# CONFIG_RTC_DRV_MAX8925 is not set
# CONFIG_RTC_DRV_MAX8998 is not setCONFIG_RTC_DRV_MAX8997=mCONFIG_RTC_DRV_MAX77686=y
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not setCONFIG_RTC_DRV_ISL12022=mCONFIG_RTC_DRV_ISL12026=yCONFIG_RTC_DRV_X1205=y
# CONFIG_RTC_DRV_PCF8523 is not set
# CONFIG_RTC_DRV_PCF85063 is not setCONFIG_RTC_DRV_PCF85363=mCONFIG_RTC_DRV_PCF8563=mCONFIG_RTC_DRV_PCF8583=mCONFIG_RTC_DRV_M41T80=m
# CONFIG_RTC_DRV_M41T80_WDT is not setCONFIG_RTC_DRV_BQ32K=yCONFIG_RTC_DRV_TPS6586X=yCONFIG_RTC_DRV_S35390A=mCONFIG_RTC_DRV_FM3130=m
# CONFIG_RTC_DRV_RX8010 is not setCONFIG_RTC_DRV_RX8581=mCONFIG_RTC_DRV_RX8025=yCONFIG_RTC_DRV_EM3027=mCONFIG_RTC_DRV_RV3028=m
# CONFIG_RTC_DRV_RV3032 is not set
# CONFIG_RTC_DRV_RV8803 is not setCONFIG_RTC_DRV_S5M=yCONFIG_RTC_DRV_SD3078=m
#
# SPI RTC drivers
#CONFIG_RTC_DRV_M41T93=yCONFIG_RTC_DRV_M41T94=y
# CONFIG_RTC_DRV_DS1302 is not setCONFIG_RTC_DRV_DS1305=mCONFIG_RTC_DRV_DS1343=mCONFIG_RTC_DRV_DS1347=yCONFIG_RTC_DRV_DS1390=mCONFIG_RTC_DRV_MAX6916=yCONFIG_RTC_DRV_R9701=yCONFIG_RTC_DRV_RX4581=yCONFIG_RTC_DRV_RS5C348=mCONFIG_RTC_DRV_MAX6902=mCONFIG_RTC_DRV_PCF2123=yCONFIG_RTC_DRV_MCP795=mCONFIG_RTC_I2C_AND_SPI=y
#
# SPI and I2C RTC drivers
#
# CONFIG_RTC_DRV_DS3232 is not setCONFIG_RTC_DRV_PCF2127=yCONFIG_RTC_DRV_RV3029C2=mCONFIG_RTC_DRV_RV3029_HWMON=yCONFIG_RTC_DRV_RX6110=m
#
# Platform RTC drivers
#CONFIG_RTC_DRV_DS1286=mCONFIG_RTC_DRV_DS1511=mCONFIG_RTC_DRV_DS1553=m
# CONFIG_RTC_DRV_DS1685_FAMILY is not setCONFIG_RTC_DRV_DS1742=y
# CONFIG_RTC_DRV_DS2404 is not setCONFIG_RTC_DRV_DA9052=mCONFIG_RTC_DRV_STK17TA8=yCONFIG_RTC_DRV_M48T86=mCONFIG_RTC_DRV_M48T35=m
# CONFIG_RTC_DRV_M48T59 is not setCONFIG_RTC_DRV_MSM6242=m
# CONFIG_RTC_DRV_BQ4802 is not setCONFIG_RTC_DRV_RP5C01=m
# CONFIG_RTC_DRV_V3020 is not setCONFIG_RTC_DRV_GAMECUBE=mCONFIG_RTC_DRV_WM831X=y
# CONFIG_RTC_DRV_SC27XX is not set
# CONFIG_RTC_DRV_SPEAR is not set
#
# on-CPU RTC drivers
#CONFIG_RTC_DRV_ASM9260=yCONFIG_RTC_DRV_DAVINCI=mCONFIG_RTC_DRV_DIGICOLOR=m
# CONFIG_RTC_DRV_FSL_FTM_ALARM is not setCONFIG_RTC_DRV_MESON=mCONFIG_RTC_DRV_MESON_VRTC=yCONFIG_RTC_DRV_S3C=mCONFIG_RTC_DRV_EP93XX=y
# CONFIG_RTC_DRV_GENERIC is not set
# CONFIG_RTC_DRV_VT8500 is not setCONFIG_RTC_DRV_SUNXI=yCONFIG_RTC_DRV_MV=mCONFIG_RTC_DRV_FTRTC010=m
# CONFIG_RTC_DRV_STMP is not setCONFIG_RTC_DRV_PCAP=yCONFIG_RTC_DRV_MC13XXX=m
# CONFIG_RTC_DRV_LPC32XX is not setCONFIG_RTC_DRV_PM8XXX=yCONFIG_RTC_DRV_TEGRA=y
# CONFIG_RTC_DRV_MOXART is not setCONFIG_RTC_DRV_MT2712=yCONFIG_RTC_DRV_MT6397=y
# CONFIG_RTC_DRV_MT7622 is not setCONFIG_RTC_DRV_XGENE=m
# CONFIG_RTC_DRV_STM32 is not setCONFIG_RTC_DRV_RTD119X=y
# CONFIG_RTC_DRV_TI_K3 is not set
#
# HID Sensor RTC drivers
#
# CONFIG_RTC_DRV_GOLDFISH is not setCONFIG_RTC_DRV_MSC313=y
# CONFIG_DMADEVICES is not set
#
# DMABUF options
#CONFIG_SYNC_FILE=yCONFIG_SW_SYNC=yCONFIG_UDMABUF=y
# CONFIG_DMABUF_MOVE_NOTIFY is not set
# CONFIG_DMABUF_DEBUG is not setCONFIG_DMABUF_SELFTESTS=m
# CONFIG_DMABUF_HEAPS is not set
# CONFIG_DMABUF_SYSFS_STATS is not set
# end of DMABUF options
# CONFIG_AUXDISPLAY is not setCONFIG_UIO=yCONFIG_UIO_PDRV_GENIRQ=mCONFIG_UIO_DMEM_GENIRQ=mCONFIG_UIO_PRUSS=yCONFIG_UIO_DFL=m
# CONFIG_VFIO is not set
# CONFIG_VIRT_DRIVERS is not setCONFIG_VIRTIO_ANCHOR=yCONFIG_VIRTIO=yCONFIG_VIRTIO_MENU=yCONFIG_VIRTIO_VDPA=mCONFIG_VIRTIO_BALLOON=yCONFIG_VIRTIO_INPUT=m
# CONFIG_VIRTIO_MMIO is not setCONFIG_VIRTIO_DMA_SHARED_BUFFER=mCONFIG_VDPA=mCONFIG_VDPA_SIM=mCONFIG_VDPA_SIM_NET=mCONFIG_VDPA_SIM_BLOCK=m
# CONFIG_VDPA_USER is not setCONFIG_VHOST_IOTLB=mCONFIG_VHOST_RING=m
# CONFIG_VHOST_MENU is not set
#
# Microsoft Hyper-V guest support
#
# end of Microsoft Hyper-V guest support
# CONFIG_GREYBUS is not setCONFIG_COMEDI=m
# CONFIG_COMEDI_DEBUG is not setCONFIG_COMEDI_DEFAULT_BUF_SIZE_KB=2048CONFIG_COMEDI_DEFAULT_BUF_MAXSIZE_KB=20480
# CONFIG_COMEDI_MISC_DRIVERS is not setCONFIG_COMEDI_ISA_DRIVERS=y
# CONFIG_COMEDI_PCL711 is not setCONFIG_COMEDI_PCL724=mCONFIG_COMEDI_PCL726=mCONFIG_COMEDI_PCL730=mCONFIG_COMEDI_PCL812=mCONFIG_COMEDI_PCL816=mCONFIG_COMEDI_PCL818=mCONFIG_COMEDI_PCM3724=mCONFIG_COMEDI_AMPLC_DIO200_ISA=mCONFIG_COMEDI_AMPLC_PC236_ISA=mCONFIG_COMEDI_AMPLC_PC263_ISA=m
# CONFIG_COMEDI_RTI800 is not setCONFIG_COMEDI_RTI802=m
# CONFIG_COMEDI_DAC02 is not setCONFIG_COMEDI_DAS16M1=m
# CONFIG_COMEDI_DAS08_ISA is not setCONFIG_COMEDI_DAS16=m
# CONFIG_COMEDI_DAS800 is not set
# CONFIG_COMEDI_DAS1800 is not setCONFIG_COMEDI_DAS6402=m
# CONFIG_COMEDI_DT2801 is not set
# CONFIG_COMEDI_DT2811 is not set
# CONFIG_COMEDI_DT2814 is not setCONFIG_COMEDI_DT2815=mCONFIG_COMEDI_DT2817=mCONFIG_COMEDI_DT282X=mCONFIG_COMEDI_DMM32AT=mCONFIG_COMEDI_FL512=mCONFIG_COMEDI_AIO_AIO12_8=mCONFIG_COMEDI_AIO_IIRO_16=mCONFIG_COMEDI_II_PCI20KC=m
# CONFIG_COMEDI_C6XDIGIO is not setCONFIG_COMEDI_MPC624=mCONFIG_COMEDI_ADQ12B=m
# CONFIG_COMEDI_NI_AT_A2150 is not set
# CONFIG_COMEDI_NI_AT_AO is not set
# CONFIG_COMEDI_NI_ATMIO is not setCONFIG_COMEDI_NI_ATMIO16D=mCONFIG_COMEDI_NI_LABPC_ISA=mCONFIG_COMEDI_PCMAD=mCONFIG_COMEDI_PCMDA12=mCONFIG_COMEDI_PCMMIO=m
# CONFIG_COMEDI_PCMUIO is not setCONFIG_COMEDI_MULTIQ3=mCONFIG_COMEDI_S526=mCONFIG_COMEDI_USB_DRIVERS=mCONFIG_COMEDI_DT9812=mCONFIG_COMEDI_NI_USB6501=mCONFIG_COMEDI_USBDUX=mCONFIG_COMEDI_USBDUXFAST=mCONFIG_COMEDI_USBDUXSIGMA=m
# CONFIG_COMEDI_VMK80XX is not setCONFIG_COMEDI_8254=mCONFIG_COMEDI_8255=mCONFIG_COMEDI_8255_SA=m
# CONFIG_COMEDI_KCOMEDILIB is not setCONFIG_COMEDI_AMPLC_DIO200=mCONFIG_COMEDI_AMPLC_PC236=mCONFIG_COMEDI_NI_LABPC=mCONFIG_COMEDI_NI_ROUTING=mCONFIG_COMEDI_TESTS=mCONFIG_COMEDI_TESTS_EXAMPLE=mCONFIG_COMEDI_TESTS_NI_ROUTES=m
# CONFIG_STAGING is not setCONFIG_GOLDFISH=y
# CONFIG_GOLDFISH_PIPE is not set
# CONFIG_CHROME_PLATFORMS is not set
# CONFIG_MELLANOX_PLATFORM is not set
# CONFIG_OLPC_XO175 is not set
# CONFIG_SURFACE_PLATFORMS is not set
# CONFIG_COMMON_CLK is not set
# CONFIG_HWSPINLOCK is not set
#
# Clock Source drivers
#CONFIG_TIMER_OF=yCONFIG_TIMER_PROBE=yCONFIG_CLKSRC_MMIO=yCONFIG_BCM2835_TIMER=y
# CONFIG_BCM_KONA_TIMER is not setCONFIG_DAVINCI_TIMER=y
# CONFIG_DIGICOLOR_TIMER is not setCONFIG_OMAP_DM_TIMER=y
# CONFIG_DW_APB_TIMER is not set
# CONFIG_FTTMR010_TIMER is not setCONFIG_IXP4XX_TIMER=yCONFIG_MESON6_TIMER=yCONFIG_OWL_TIMER=y
# CONFIG_RDA_TIMER is not setCONFIG_SUN4I_TIMER=yCONFIG_TEGRA_TIMER=yCONFIG_TEGRA186_TIMER=y
# CONFIG_VT8500_TIMER is not setCONFIG_NPCM7XX_TIMER=yCONFIG_ASM9260_TIMER=yCONFIG_CLKSRC_DBX500_PRCMU=yCONFIG_CLPS711X_TIMER=yCONFIG_MXS_TIMER=yCONFIG_NSPIRE_TIMER=y
# CONFIG_INTEGRATOR_AP_TIMER is not set
# CONFIG_CLKSRC_PISTACHIO is not setCONFIG_CLKSRC_STM32_LP=y
# CONFIG_ARMV7M_SYSTICK is not setCONFIG_ATMEL_PIT=yCONFIG_ATMEL_ST=y
# CONFIG_CLKSRC_SAMSUNG_PWM is not set
# CONFIG_FSL_FTM_TIMER is not setCONFIG_OXNAS_RPS_TIMER=yCONFIG_MTK_TIMER=y
# CONFIG_SPRD_TIMER is not setCONFIG_SH_TIMER_CMT=y
# CONFIG_SH_TIMER_MTU2 is not setCONFIG_RENESAS_OSTM=yCONFIG_SH_TIMER_TMU=yCONFIG_EM_TIMER_STI=yCONFIG_CLKSRC_PXA=yCONFIG_TIMER_IMX_SYS_CTR=y
# CONFIG_CLKSRC_ST_LPC is not set
# CONFIG_GXP_TIMER is not setCONFIG_MSC313E_TIMER=y
# CONFIG_MICROCHIP_PIT64B is not set
# end of Clock Source drivers
CONFIG_MAILBOX=yCONFIG_IMX_MBOX=mCONFIG_ROCKCHIP_MBOX=y
# CONFIG_ALTERA_MBOX is not setCONFIG_POLARFIRE_SOC_MAILBOX=mCONFIG_QCOM_APCS_IPC=yCONFIG_BCM_PDC_MBOX=yCONFIG_STM32_IPCC=m
# CONFIG_MTK_ADSP_MBOX is not setCONFIG_MTK_CMDQ_MBOX=yCONFIG_SUN6I_MSGBOX=m
# CONFIG_SPRD_MBOX is not set
# CONFIG_QCOM_IPCC is not setCONFIG_IOMMU_IOVA=m
# CONFIG_IOMMU_SUPPORT is not set
#
# Remoteproc drivers
#CONFIG_REMOTEPROC=y
# CONFIG_REMOTEPROC_CDEV is not setCONFIG_INGENIC_VPU_RPROC=mCONFIG_MTK_SCP=y
# CONFIG_MESON_MX_AO_ARC_REMOTEPROC is not set
# CONFIG_RCAR_REMOTEPROC is not set
# end of Remoteproc drivers
#
# Rpmsg drivers
#CONFIG_RPMSG=yCONFIG_RPMSG_CHAR=yCONFIG_RPMSG_CTRL=y
# CONFIG_RPMSG_NS is not setCONFIG_RPMSG_MTK_SCP=y
# CONFIG_RPMSG_QCOM_GLINK_RPM is not set
# CONFIG_RPMSG_VIRTIO is not set
# end of Rpmsg drivers
#
# SOC (System On Chip) specific Drivers
#
#
# Amlogic SoC drivers
#
# CONFIG_MESON_CANVAS is not setCONFIG_MESON_CLK_MEASURE=yCONFIG_MESON_GX_SOCINFO=y
# CONFIG_MESON_MX_SOCINFO is not set
# end of Amlogic SoC drivers
#
# Apple SoC drivers
#CONFIG_APPLE_RTKIT=yCONFIG_APPLE_SART=m
# end of Apple SoC drivers
#
# ASPEED SoC drivers
#CONFIG_ASPEED_LPC_CTRL=yCONFIG_ASPEED_LPC_SNOOP=yCONFIG_ASPEED_UART_ROUTING=yCONFIG_ASPEED_P2A_CTRL=yCONFIG_ASPEED_SOCINFO=y
# end of ASPEED SoC drivers
CONFIG_AT91_SOC_ID=yCONFIG_AT91_SOC_SFR=y
#
# Broadcom SoC drivers
#CONFIG_SOC_BCM63XX=y
# CONFIG_SOC_BRCMSTB is not set
# end of Broadcom SoC drivers
#
# NXP/Freescale QorIQ SoC drivers
#
# end of NXP/Freescale QorIQ SoC drivers
#
# fujitsu SoC drivers # # end of fujitsu SoC drivers
#
# i.MX SoC drivers
#
# CONFIG_SOC_IMX8M is not setCONFIG_SOC_IMX9=y
# end of i.MX SoC drivers
#
# IXP4xx SoC drivers
#CONFIG_IXP4XX_QMGR=mCONFIG_IXP4XX_NPE=m
# end of IXP4xx SoC drivers
#
# Enable LiteX SoC Builder specific drivers
#CONFIG_LITEX=yCONFIG_LITEX_SOC_CONTROLLER=m
# end of Enable LiteX SoC Builder specific drivers
#
# MediaTek SoC drivers
#CONFIG_MTK_CMDQ=mCONFIG_MTK_DEVAPC=yCONFIG_MTK_INFRACFG=yCONFIG_MTK_MMSYS=yCONFIG_MTK_SVS=y
# end of MediaTek SoC drivers
CONFIG_POLARFIRE_SOC_SYS_CTRL=m
#
# Qualcomm SoC drivers
#
# CONFIG_QCOM_GENI_SE is not set
# CONFIG_QCOM_GSBI is not set
# CONFIG_QCOM_LLCC is not setCONFIG_QCOM_RPMH=yCONFIG_QCOM_SMD_RPM=yCONFIG_QCOM_SPM=y
# CONFIG_QCOM_WCNSS_CTRL is not set
# CONFIG_QCOM_APR is not setCONFIG_QCOM_ICC_BWMON=m
# end of Qualcomm SoC drivers
# CONFIG_SOC_RENESAS is not set
# CONFIG_ROCKCHIP_GRF is not setCONFIG_SOC_SAMSUNG=yCONFIG_EXYNOS_ASV_ARM=yCONFIG_EXYNOS_CHIPID=m
# CONFIG_EXYNOS_USI is not set
# CONFIG_EXYNOS_PM_DOMAINS is not set
# CONFIG_EXYNOS_REGULATOR_COUPLER is not setCONFIG_SOC_TEGRA20_VOLTAGE_COUPLER=y
# CONFIG_SOC_TEGRA30_VOLTAGE_COUPLER is not set
# CONFIG_SOC_TI is not set
# CONFIG_UX500_SOC_ID is not set
#
# Xilinx SoC drivers
#
# end of Xilinx SoC drivers # end of SOC (System On Chip) specific Drivers
CONFIG_PM_DEVFREQ=y
#
# DEVFREQ Governors
#CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=mCONFIG_DEVFREQ_GOV_PERFORMANCE=m
# CONFIG_DEVFREQ_GOV_POWERSAVE is not setCONFIG_DEVFREQ_GOV_USERSPACE=yCONFIG_DEVFREQ_GOV_PASSIVE=y
#
# DEVFREQ Drivers
#CONFIG_ARM_EXYNOS_BUS_DEVFREQ=mCONFIG_ARM_IMX_BUS_DEVFREQ=mCONFIG_ARM_MEDIATEK_CCI_DEVFREQ=yCONFIG_PM_DEVFREQ_EVENT=yCONFIG_DEVFREQ_EVENT_EXYNOS_NOCP=mCONFIG_DEVFREQ_EVENT_EXYNOS_PPMU=mCONFIG_DEVFREQ_EVENT_ROCKCHIP_DFI=yCONFIG_EXTCON=y
#
# Extcon Device Drivers
#CONFIG_EXTCON_FSA9480=yCONFIG_EXTCON_GPIO=m
# CONFIG_EXTCON_MAX3355 is not setCONFIG_EXTCON_MAX77693=mCONFIG_EXTCON_MAX77843=mCONFIG_EXTCON_MAX8997=mCONFIG_EXTCON_PTN5150=m
# CONFIG_EXTCON_QCOM_SPMI_MISC is not setCONFIG_EXTCON_RT8973A=yCONFIG_EXTCON_SM5502=mCONFIG_EXTCON_USB_GPIO=yCONFIG_EXTCON_USBC_TUSB320=mCONFIG_MEMORY=yCONFIG_BRCMSTB_DPFE=yCONFIG_BRCMSTB_MEMC=m
# CONFIG_BT1_L2_CTL is not set
# CONFIG_TI_EMIF is not setCONFIG_FPGA_DFL_EMIF=m
# CONFIG_FSL_CORENET_CF is not setCONFIG_FSL_IFC=yCONFIG_MTK_SMI=y
# CONFIG_DA8XX_DDRCTL is not setCONFIG_RENESAS_RPCIF=m
# CONFIG_STM32_FMC2_EBI is not set
# CONFIG_SAMSUNG_MC is not set
# CONFIG_IIO is not setCONFIG_PWM=yCONFIG_PWM_SYSFS=y
# CONFIG_PWM_DEBUG is not set
# CONFIG_PWM_BCM2835 is not setCONFIG_PWM_BERLIN=m
# CONFIG_PWM_BRCMSTB is not setCONFIG_PWM_CLK=m
# CONFIG_PWM_CLPS711X is not set
# CONFIG_PWM_EP93XX is not setCONFIG_PWM_HIBVT=m
# CONFIG_PWM_IMX1 is not setCONFIG_PWM_IMX27=mCONFIG_PWM_INTEL_LGM=yCONFIG_PWM_IQS620A=mCONFIG_PWM_LP3943=y
# CONFIG_PWM_LPC18XX_SCT is not set
# CONFIG_PWM_LPC32XX is not setCONFIG_PWM_LPSS=mCONFIG_PWM_LPSS_PLATFORM=mCONFIG_PWM_MTK_DISP=mCONFIG_PWM_MEDIATEK=yCONFIG_PWM_PCA9685=mCONFIG_PWM_PXA=yCONFIG_PWM_RASPBERRYPI_POE=yCONFIG_PWM_RCAR=m
# CONFIG_PWM_RENESAS_TPU is not set
# CONFIG_PWM_ROCKCHIP is not setCONFIG_PWM_SAMSUNG=y
# CONFIG_PWM_SL28CPLD is not set
# CONFIG_PWM_SPRD is not setCONFIG_PWM_STM32=mCONFIG_PWM_STM32_LP=yCONFIG_PWM_TEGRA=yCONFIG_PWM_TIECAP=mCONFIG_PWM_TIEHRPWM=yCONFIG_PWM_TWL=m
# CONFIG_PWM_TWL_LED is not setCONFIG_PWM_VISCONTI=yCONFIG_PWM_VT8500=m
#
# IRQ chip support
#CONFIG_AL_FIC=yCONFIG_MADERA_IRQ=m
# CONFIG_RENESAS_INTC_IRQPIN is not setCONFIG_RENESAS_IRQC=yCONFIG_RENESAS_RZA1_IRQC=yCONFIG_RENESAS_RZG2L_IRQC=yCONFIG_SL28CPLD_INTC=yCONFIG_TS4800_IRQ=m
# CONFIG_INGENIC_TCU_IRQ is not setCONFIG_IRQ_UNIPHIER_AIDET=yCONFIG_MESON_IRQ_GPIO=yCONFIG_IMX_IRQSTEER=y
# CONFIG_IMX_INTMUX is not set
# CONFIG_EXYNOS_IRQ_COMBINER is not setCONFIG_MST_IRQ=yCONFIG_MCHP_EIC=y
# CONFIG_SUNPLUS_SP7021_INTC is not set
# end of IRQ chip support
CONFIG_IPACK_BUS=yCONFIG_SERIAL_IPOCTAL=mCONFIG_RESET_CONTROLLER=yCONFIG_RESET_A10SR=m
# CONFIG_RESET_ATH79 is not setCONFIG_RESET_AXS10X=yCONFIG_RESET_BCM6345=y
# CONFIG_RESET_BERLIN is not setCONFIG_RESET_BRCMSTB=mCONFIG_RESET_BRCMSTB_RESCAL=mCONFIG_RESET_HSDK=yCONFIG_RESET_IMX7=m
# CONFIG_RESET_LANTIQ is not setCONFIG_RESET_LPC18XX=yCONFIG_RESET_MCHP_SPARX5=y
# CONFIG_RESET_MESON is not setCONFIG_RESET_MESON_AUDIO_ARB=yCONFIG_RESET_NPCM=y
# CONFIG_RESET_PISTACHIO is not setCONFIG_RESET_QCOM_AOSS=yCONFIG_RESET_QCOM_PDC=yCONFIG_RESET_RASPBERRYPI=yCONFIG_RESET_RZG2L_USBPHY_CTRL=yCONFIG_RESET_SCMI=yCONFIG_RESET_SIMPLE=yCONFIG_RESET_SOCFPGA=yCONFIG_RESET_STARFIVE_JH7100=yCONFIG_RESET_SUNPLUS=yCONFIG_RESET_SUNXI=y
# CONFIG_RESET_TI_SCI is not set
# CONFIG_RESET_TI_SYSCON is not setCONFIG_RESET_TI_TPS380X=mCONFIG_RESET_TN48M_CPLD=m
# CONFIG_RESET_ZYNQ is not setCONFIG_COMMON_RESET_HI3660=mCONFIG_COMMON_RESET_HI6220=y
#
# PHY Subsystem
#CONFIG_GENERIC_PHY=yCONFIG_GENERIC_PHY_MIPI_DPHY=yCONFIG_PHY_PISTACHIO_USB=m
# CONFIG_USB_LGM_PHY is not set
# CONFIG_PHY_CAN_TRANSCEIVER is not setCONFIG_PHY_SUN4I_USB=yCONFIG_PHY_SUN9I_USB=y
#
# PHY drivers for Broadcom platforms
#CONFIG_PHY_BCM63XX_USBH=mCONFIG_BCM_KONA_USB2_PHY=yCONFIG_PHY_NS2_PCIE=y
# end of PHY drivers for Broadcom platforms
# CONFIG_PHY_HI6220_USB is not setCONFIG_PHY_HI3660_USB=yCONFIG_PHY_HI3670_USB=m
# CONFIG_PHY_HI3670_PCIE is not set
# CONFIG_PHY_HISTB_COMBPHY is not set
# CONFIG_PHY_HISI_INNO_USB2 is not set
# CONFIG_PHY_INGENIC_USB is not setCONFIG_PHY_PXA_28NM_HSIC=mCONFIG_PHY_PXA_28NM_USB2=m
# CONFIG_PHY_PXA_USB is not setCONFIG_PHY_MMP3_USB=y
# CONFIG_PHY_MMP3_HSIC is not set
# CONFIG_PHY_QCOM_USB_HS is not setCONFIG_PHY_QCOM_USB_HSIC=m
# CONFIG_PHY_MT7621_PCI is not setCONFIG_PHY_RALINK_USB=mCONFIG_PHY_RCAR_GEN3_USB3=yCONFIG_PHY_ROCKCHIP_DPHY_RX0=yCONFIG_PHY_ROCKCHIP_PCIE=yCONFIG_PHY_ROCKCHIP_SNPS_PCIE3=mCONFIG_PHY_EXYNOS_MIPI_VIDEO=mCONFIG_PHY_SAMSUNG_USB2=yCONFIG_PHY_S5PV210_USB2=yCONFIG_PHY_ST_SPEAR1310_MIPHY=y
# CONFIG_PHY_ST_SPEAR1340_MIPHY is not setCONFIG_PHY_STIH407_USB=yCONFIG_PHY_TEGRA194_P2U=mCONFIG_PHY_DA8XX_USB=m
# CONFIG_PHY_DM816X_USB is not setCONFIG_OMAP_CONTROL_PHY=mCONFIG_TI_PIPE3=mCONFIG_PHY_TUSB1210=m
# CONFIG_PHY_INTEL_KEEMBAY_EMMC is not set
# CONFIG_PHY_INTEL_KEEMBAY_USB is not setCONFIG_PHY_INTEL_LGM_EMMC=mCONFIG_PHY_XILINX_ZYNQMP=m
# end of PHY Subsystem
CONFIG_POWERCAP=y
# CONFIG_MCB is not setCONFIG_RAS=y
#
# Android
#
# CONFIG_ANDROID_BINDER_IPC is not set
# end of Android
CONFIG_DAX=mCONFIG_NVMEM=yCONFIG_NVMEM_SYSFS=y
# CONFIG_NVMEM_APPLE_EFUSES is not setCONFIG_NVMEM_BCM_OCOTP=yCONFIG_NVMEM_BRCM_NVRAM=yCONFIG_NVMEM_IMX_IIM=yCONFIG_NVMEM_IMX_OCOTP=yCONFIG_NVMEM_LAN9662_OTPC=yCONFIG_NVMEM_LAYERSCAPE_SFP=mCONFIG_NVMEM_LPC18XX_EEPROM=m
# CONFIG_NVMEM_LPC18XX_OTP is not setCONFIG_NVMEM_MESON_MX_EFUSE=y
# CONFIG_NVMEM_MICROCHIP_OTPC is not setCONFIG_NVMEM_MTK_EFUSE=yCONFIG_NVMEM_MXS_OCOTP=mCONFIG_NVMEM_NINTENDO_OTP=mCONFIG_NVMEM_QCOM_QFPROM=yCONFIG_NVMEM_RAVE_SP_EEPROM=m
# CONFIG_NVMEM_RMEM is not setCONFIG_NVMEM_ROCKCHIP_EFUSE=mCONFIG_NVMEM_ROCKCHIP_OTP=yCONFIG_NVMEM_SC27XX_EFUSE=y
# CONFIG_NVMEM_SNVS_LPGPR is not setCONFIG_NVMEM_SPMI_SDAM=mCONFIG_NVMEM_SPRD_EFUSE=m
# CONFIG_NVMEM_STM32_ROMEM is not setCONFIG_NVMEM_SUNPLUS_OCOTP=mCONFIG_NVMEM_UNIPHIER_EFUSE=mCONFIG_NVMEM_VF610_OCOTP=m
#
# HW tracing support
#CONFIG_STM=mCONFIG_STM_PROTO_BASIC=mCONFIG_STM_PROTO_SYS_T=mCONFIG_STM_DUMMY=mCONFIG_STM_SOURCE_CONSOLE=mCONFIG_STM_SOURCE_HEARTBEAT=mCONFIG_INTEL_TH=y
# CONFIG_INTEL_TH_GTH is not set
# CONFIG_INTEL_TH_STH is not setCONFIG_INTEL_TH_MSU=yCONFIG_INTEL_TH_PTI=m
# CONFIG_INTEL_TH_DEBUG is not set
# end of HW tracing support
CONFIG_FPGA=mCONFIG_FPGA_MGR_SOCFPGA=m
# CONFIG_FPGA_MGR_SOCFPGA_A10 is not setCONFIG_ALTERA_PR_IP_CORE=mCONFIG_FPGA_MGR_ALTERA_PS_SPI=m
# CONFIG_FPGA_MGR_ZYNQ_FPGA is not setCONFIG_FPGA_MGR_XILINX_SPI=m
# CONFIG_FPGA_MGR_MACHXO2_SPI is not setCONFIG_FPGA_BRIDGE=mCONFIG_ALTERA_FREEZE_BRIDGE=m
# CONFIG_XILINX_PR_DECOUPLER is not setCONFIG_FPGA_REGION=mCONFIG_FPGA_DFL=mCONFIG_FPGA_DFL_AFU=mCONFIG_FPGA_DFL_NIOS_INTEL_PAC_N3000=mCONFIG_FPGA_MGR_ZYNQMP_FPGA=mCONFIG_FPGA_MGR_VERSAL_FPGA=mCONFIG_FPGA_M10_BMC_SEC_UPDATE=mCONFIG_FPGA_MGR_MICROCHIP_SPI=mCONFIG_TEE=yCONFIG_MULTIPLEXER=y
#
# Multiplexer drivers
#CONFIG_MUX_ADG792A=mCONFIG_MUX_ADGS1408=m
# CONFIG_MUX_GPIO is not setCONFIG_MUX_MMIO=y
# end of Multiplexer drivers
CONFIG_PM_OPP=yCONFIG_SIOX=mCONFIG_SIOX_BUS_GPIO=mCONFIG_SLIMBUS=mCONFIG_SLIM_QCOM_CTRL=m
# CONFIG_INTERCONNECT is not setCONFIG_COUNTER=m
# CONFIG_104_QUAD_8 is not set
# CONFIG_INTERRUPT_CNT is not setCONFIG_STM32_TIMER_CNT=mCONFIG_STM32_LPTIMER_CNT=m
# CONFIG_TI_EQEP is not setCONFIG_TI_ECAP_CAPTURE=m
# CONFIG_MOST is not setCONFIG_PECI=mCONFIG_PECI_CPU=mCONFIG_HTE=y
# end of Device Drivers
#
# File systems
#
# CONFIG_VALIDATE_FS_PARSER is not setCONFIG_FS_POSIX_ACL=yCONFIG_EXPORTFS=yCONFIG_EXPORTFS_BLOCK_OPS=y
# CONFIG_FILE_LOCKING is not set
# CONFIG_FS_ENCRYPTION is not setCONFIG_FS_VERITY=yCONFIG_FS_VERITY_DEBUG=yCONFIG_FS_VERITY_BUILTIN_SIGNATURES=yCONFIG_FSNOTIFY=yCONFIG_DNOTIFY=yCONFIG_INOTIFY_USER=y
# CONFIG_FANOTIFY is not set
# CONFIG_QUOTA is not setCONFIG_AUTOFS4_FS=yCONFIG_AUTOFS_FS=y
# CONFIG_FUSE_FS is not set
# CONFIG_OVERLAY_FS is not set
#
# Caches
#
# CONFIG_FSCACHE is not set
# end of Caches
#
# Pseudo filesystems
#
# CONFIG_PROC_FS is not setCONFIG_KERNFS=yCONFIG_SYSFS=yCONFIG_TMPFS=yCONFIG_TMPFS_POSIX_ACL=yCONFIG_TMPFS_XATTR=yCONFIG_MEMFD_CREATE=yCONFIG_CONFIGFS_FS=y
# end of Pseudo filesystems
# CONFIG_MISC_FILESYSTEMS is not set
# CONFIG_NETWORK_FILESYSTEMS is not setCONFIG_NLS=yCONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not setCONFIG_NLS_CODEPAGE_775=yCONFIG_NLS_CODEPAGE_850=mCONFIG_NLS_CODEPAGE_852=y
# CONFIG_NLS_CODEPAGE_855 is not setCONFIG_NLS_CODEPAGE_857=mCONFIG_NLS_CODEPAGE_860=m
# CONFIG_NLS_CODEPAGE_861 is not setCONFIG_NLS_CODEPAGE_862=mCONFIG_NLS_CODEPAGE_863=y
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not setCONFIG_NLS_CODEPAGE_1250=yCONFIG_NLS_CODEPAGE_1251=yCONFIG_NLS_ASCII=yCONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not setCONFIG_NLS_ISO8859_3=mCONFIG_NLS_ISO8859_4=m
# CONFIG_NLS_ISO8859_5 is not setCONFIG_NLS_ISO8859_6=yCONFIG_NLS_ISO8859_7=mCONFIG_NLS_ISO8859_9=yCONFIG_NLS_ISO8859_13=yCONFIG_NLS_ISO8859_14=yCONFIG_NLS_ISO8859_15=yCONFIG_NLS_KOI8_R=y
# CONFIG_NLS_KOI8_U is not setCONFIG_NLS_MAC_ROMAN=y
# CONFIG_NLS_MAC_CELTIC is not setCONFIG_NLS_MAC_CENTEURO=yCONFIG_NLS_MAC_CROATIAN=m
# CONFIG_NLS_MAC_CYRILLIC is not setCONFIG_NLS_MAC_GAELIC=mCONFIG_NLS_MAC_GREEK=yCONFIG_NLS_MAC_ICELAND=m
# CONFIG_NLS_MAC_INUIT is not set
# CONFIG_NLS_MAC_ROMANIAN is not setCONFIG_NLS_MAC_TURKISH=y
# CONFIG_NLS_UTF8 is not setCONFIG_DLM=yCONFIG_DLM_DEPRECATED_API=y
# CONFIG_DLM_DEBUG is not setCONFIG_UNICODE=yCONFIG_UNICODE_NORMALIZATION_SELFTEST=m
# end of File systems
#
# Security options
#CONFIG_KEYS=y
# CONFIG_KEYS_REQUEST_CACHE is not set CONFIG_PERSISTENT_KEYRINGS=y
# CONFIG_TRUSTED_KEYS is not setCONFIG_ENCRYPTED_KEYS=y
# CONFIG_USER_DECRYPTED_DATA is not set
# CONFIG_KEY_DH_OPERATIONS is not set
# CONFIG_KEY_NOTIFICATIONS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y CONFIG_HARDENED_USERCOPY=y
# CONFIG_STATIC_USERMODEHELPER is not set CONFIG_DEFAULT_SECURITY_DAC=y CONFIG_LSM="landlock,lockdown,yama,loadpin,safesetid,integrity,bpf"
#
# Kernel hardening options
#
#
# Memory initialization
#CONFIG_CC_HAS_AUTO_VAR_INIT_PATTERN=yCONFIG_CC_HAS_AUTO_VAR_INIT_ZERO_BARE=yCONFIG_CC_HAS_AUTO_VAR_INIT_ZERO=y
# CONFIG_INIT_STACK_NONE is not setCONFIG_INIT_STACK_ALL_PATTERN=y
# CONFIG_INIT_STACK_ALL_ZERO is not setCONFIG_INIT_ON_ALLOC_DEFAULT_ON=yCONFIG_INIT_ON_FREE_DEFAULT_ON=y
# end of Memory initialization
CONFIG_CC_HAS_RANDSTRUCT=y
# CONFIG_RANDSTRUCT_NONE is not setCONFIG_RANDSTRUCT_FULL=yCONFIG_RANDSTRUCT=y
# end of Kernel hardening options # end of Security options
CONFIG_CRYPTO=y
#
# Crypto core or helper
#CONFIG_CRYPTO_ALGAPI=yCONFIG_CRYPTO_ALGAPI2=yCONFIG_CRYPTO_AEAD=yCONFIG_CRYPTO_AEAD2=yCONFIG_CRYPTO_SKCIPHER=yCONFIG_CRYPTO_SKCIPHER2=yCONFIG_CRYPTO_HASH=yCONFIG_CRYPTO_HASH2=yCONFIG_CRYPTO_RNG=yCONFIG_CRYPTO_RNG2=yCONFIG_CRYPTO_RNG_DEFAULT=yCONFIG_CRYPTO_AKCIPHER2=yCONFIG_CRYPTO_AKCIPHER=yCONFIG_CRYPTO_KPP2=yCONFIG_CRYPTO_KPP=yCONFIG_CRYPTO_ACOMP2=yCONFIG_CRYPTO_MANAGER=yCONFIG_CRYPTO_MANAGER2=yCONFIG_CRYPTO_USER=yCONFIG_CRYPTO_MANAGER_DISABLE_TESTS=yCONFIG_CRYPTO_GF128MUL=yCONFIG_CRYPTO_NULL=yCONFIG_CRYPTO_NULL2=yCONFIG_CRYPTO_CRYPTD=yCONFIG_CRYPTO_AUTHENC=yCONFIG_CRYPTO_TEST=m
# end of Crypto core or helper
#
# Public-key cryptography
#CONFIG_CRYPTO_RSA=yCONFIG_CRYPTO_DH=mCONFIG_CRYPTO_DH_RFC7919_GROUPS=yCONFIG_CRYPTO_ECC=yCONFIG_CRYPTO_ECDH=y
# CONFIG_CRYPTO_ECDSA is not setCONFIG_CRYPTO_ECRDSA=yCONFIG_CRYPTO_SM2=mCONFIG_CRYPTO_CURVE25519=m
# end of Public-key cryptography
#
# Block ciphers
#CONFIG_CRYPTO_AES=yCONFIG_CRYPTO_AES_TI=mCONFIG_CRYPTO_ARIA=y
# CONFIG_CRYPTO_BLOWFISH is not setCONFIG_CRYPTO_CAMELLIA=mCONFIG_CRYPTO_CAST_COMMON=y
# CONFIG_CRYPTO_CAST5 is not setCONFIG_CRYPTO_CAST6=yCONFIG_CRYPTO_DES=yCONFIG_CRYPTO_FCRYPT=yCONFIG_CRYPTO_SERPENT=m
# CONFIG_CRYPTO_SM4_GENERIC is not setCONFIG_CRYPTO_TWOFISH=mCONFIG_CRYPTO_TWOFISH_COMMON=m
# end of Block ciphers
#
# Length-preserving ciphers and modes
#CONFIG_CRYPTO_ADIANTUM=mCONFIG_CRYPTO_CHACHA20=yCONFIG_CRYPTO_CBC=yCONFIG_CRYPTO_CFB=mCONFIG_CRYPTO_CTR=yCONFIG_CRYPTO_CTS=yCONFIG_CRYPTO_ECB=yCONFIG_CRYPTO_HCTR2=mCONFIG_CRYPTO_KEYWRAP=mCONFIG_CRYPTO_LRW=yCONFIG_CRYPTO_OFB=yCONFIG_CRYPTO_PCBC=yCONFIG_CRYPTO_XCTR=mCONFIG_CRYPTO_XTS=yCONFIG_CRYPTO_NHPOLY1305=m
# end of Length-preserving ciphers and modes
#
# AEAD (authenticated encryption with associated data) ciphers #
# CONFIG_CRYPTO_AEGIS128 is not set CONFIG_CRYPTO_CHACHA20POLY1305=yCONFIG_CRYPTO_CCM=mCONFIG_CRYPTO_GCM=yCONFIG_CRYPTO_SEQIV=yCONFIG_CRYPTO_ECHAINIV=y
# CONFIG_CRYPTO_ESSIV is not set
# end of AEAD (authenticated encryption with associated data) ciphers
#
# Hashes, digests, and MACs
#CONFIG_CRYPTO_BLAKE2B=mCONFIG_CRYPTO_CMAC=yCONFIG_CRYPTO_GHASH=yCONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_MD4 is not setCONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not setCONFIG_CRYPTO_POLYVAL=mCONFIG_CRYPTO_POLY1305=yCONFIG_CRYPTO_RMD160=yCONFIG_CRYPTO_SHA1=yCONFIG_CRYPTO_SHA256=yCONFIG_CRYPTO_SHA512=y
# CONFIG_CRYPTO_SHA3 is not setCONFIG_CRYPTO_SM3=yCONFIG_CRYPTO_SM3_GENERIC=yCONFIG_CRYPTO_STREEBOG=yCONFIG_CRYPTO_VMAC=m
# CONFIG_CRYPTO_WP512 is not setCONFIG_CRYPTO_XCBC=yCONFIG_CRYPTO_XXHASH=y
# end of Hashes, digests, and MACs
#
# CRCs (cyclic redundancy checks)
#CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CRC32 is not setCONFIG_CRYPTO_CRCT10DIF=yCONFIG_CRYPTO_CRC64_ROCKSOFT=m
# end of CRCs (cyclic redundancy checks)
#
# Compression
#CONFIG_CRYPTO_DEFLATE=mCONFIG_CRYPTO_LZO=mCONFIG_CRYPTO_842=yCONFIG_CRYPTO_LZ4=yCONFIG_CRYPTO_LZ4HC=yCONFIG_CRYPTO_ZSTD=y
# end of Compression
#
# Random number generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not setCONFIG_CRYPTO_DRBG_MENU=yCONFIG_CRYPTO_DRBG_HMAC=y
# CONFIG_CRYPTO_DRBG_HASH is not setCONFIG_CRYPTO_DRBG_CTR=yCONFIG_CRYPTO_DRBG=yCONFIG_CRYPTO_JITTERENTROPY=y
# end of Random number generation
#
# Userspace interface
#CONFIG_CRYPTO_USER_API=y CONFIG_CRYPTO_USER_API_HASH=m
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set # CONFIG_CRYPTO_USER_API_RNG is not set CONFIG_CRYPTO_USER_API_AEAD=y
# CONFIG_CRYPTO_USER_API_ENABLE_OBSOLETE is not set # CONFIG_CRYPTO_STATS is not set
# end of Userspace interface
CONFIG_CRYPTO_HASH_INFO=y
# CONFIG_CRYPTO_HW is not setCONFIG_ASYMMETRIC_KEY_TYPE=yCONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=yCONFIG_X509_CERTIFICATE_PARSER=yCONFIG_PKCS8_PRIVATE_KEY_PARSER=yCONFIG_PKCS7_MESSAGE_PARSER=yCONFIG_PKCS7_TEST_KEY=yCONFIG_SIGNED_PE_FILE_VERIFICATION=y
# CONFIG_FIPS_SIGNATURE_SELFTEST is not set
#
# Certificates for signature checking
#CONFIG_SYSTEM_TRUSTED_KEYRING=yCONFIG_SYSTEM_TRUSTED_KEYS=""
# CONFIG_SYSTEM_EXTRA_CERTIFICATE is not set
# CONFIG_SECONDARY_TRUSTED_KEYRING is not setCONFIG_SYSTEM_BLACKLIST_KEYRING=yCONFIG_SYSTEM_BLACKLIST_HASH_LIST=""CONFIG_SYSTEM_REVOCATION_LIST=yCONFIG_SYSTEM_REVOCATION_KEYS=""CONFIG_SYSTEM_BLACKLIST_AUTH_UPDATE=y
# end of Certificates for signature checking
CONFIG_BINARY_PRINTF=y
#
# Library routines
#CONFIG_LINEAR_RANGES=yCONFIG_PACKING=yCONFIG_BITREVERSE=yCONFIG_GENERIC_STRNCPY_FROM_USER=yCONFIG_GENERIC_STRNLEN_USER=yCONFIG_GENERIC_NET_UTILS=yCONFIG_CORDIC=m
# CONFIG_PRIME_NUMBERS is not setCONFIG_RATIONAL=yCONFIG_GENERIC_PCI_IOMAP=yCONFIG_GENERIC_IOMAP=yCONFIG_STMP_DEVICE=y
#
# Crypto library routines
#CONFIG_CRYPTO_LIB_UTILS=yCONFIG_CRYPTO_LIB_AES=yCONFIG_CRYPTO_LIB_ARC4=yCONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=yCONFIG_CRYPTO_LIB_CHACHA_GENERIC=yCONFIG_CRYPTO_LIB_CHACHA=mCONFIG_CRYPTO_LIB_CURVE25519_GENERIC=m
# CONFIG_CRYPTO_LIB_CURVE25519 is not setCONFIG_CRYPTO_LIB_DES=yCONFIG_CRYPTO_LIB_POLY1305_RSIZE=1CONFIG_CRYPTO_LIB_POLY1305_GENERIC=yCONFIG_CRYPTO_LIB_POLY1305=m
# CONFIG_CRYPTO_LIB_CHACHA20POLY1305 is not setCONFIG_CRYPTO_LIB_SHA1=yCONFIG_CRYPTO_LIB_SHA256=y
# end of Crypto library routines
CONFIG_CRC_CCITT=yCONFIG_CRC16=y
# CONFIG_CRC_T10DIF is not setCONFIG_CRC64_ROCKSOFT=mCONFIG_CRC_ITU_T=yCONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
# CONFIG_CRC32_SLICEBY8 is not setCONFIG_CRC32_SLICEBY4=y
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not setCONFIG_CRC64=yCONFIG_CRC4=yCONFIG_CRC7=yCONFIG_LIBCRC32C=yCONFIG_CRC8=yCONFIG_XXHASH=yCONFIG_AUDIT_GENERIC=yCONFIG_RANDOM32_SELFTEST=yCONFIG_842_COMPRESS=yCONFIG_842_DECOMPRESS=yCONFIG_ZLIB_INFLATE=yCONFIG_ZLIB_DEFLATE=yCONFIG_LZO_COMPRESS=mCONFIG_LZO_DECOMPRESS=yCONFIG_LZ4_COMPRESS=yCONFIG_LZ4HC_COMPRESS=yCONFIG_LZ4_DECOMPRESS=yCONFIG_ZSTD_COMMON=yCONFIG_ZSTD_COMPRESS=yCONFIG_ZSTD_DECOMPRESS=yCONFIG_XZ_DEC=mCONFIG_XZ_DEC_X86=y
# CONFIG_XZ_DEC_POWERPC is not setCONFIG_XZ_DEC_IA64=y
# CONFIG_XZ_DEC_ARM is not setCONFIG_XZ_DEC_ARMTHUMB=yCONFIG_XZ_DEC_SPARC=y
# CONFIG_XZ_DEC_MICROLZMA is not setCONFIG_XZ_DEC_BCJ=yCONFIG_XZ_DEC_TEST=mCONFIG_DECOMPRESS_GZIP=yCONFIG_DECOMPRESS_BZIP2=yCONFIG_DECOMPRESS_LZMA=yCONFIG_DECOMPRESS_LZO=yCONFIG_DECOMPRESS_LZ4=yCONFIG_GENERIC_ALLOCATOR=yCONFIG_ASSOCIATIVE_ARRAY=yCONFIG_HAS_IOMEM=yCONFIG_HAS_IOPORT_MAP=yCONFIG_HAS_DMA=yCONFIG_DMA_OPS=yCONFIG_NEED_SG_DMA_LENGTH=yCONFIG_DMA_DECLARE_COHERENT=yCONFIG_ARCH_HAS_SYNC_DMA_FOR_DEVICE=yCONFIG_DMA_GLOBAL_POOL=y
# CONFIG_DMA_API_DEBUG is not setCONFIG_DMA_MAP_BENCHMARK=yCONFIG_SGL_ALLOC=yCONFIG_DQL=yCONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not setCONFIG_NLATTR=yCONFIG_GENERIC_ATOMIC64=yCONFIG_CLZ_TAB=yCONFIG_IRQ_POLL=yCONFIG_MPILIB=yCONFIG_DIMLIB=yCONFIG_OID_REGISTRY=yCONFIG_FONT_SUPPORT=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=yCONFIG_STACKDEPOT=yCONFIG_STACKDEPOT_ALWAYS_INIT=yCONFIG_REF_TRACKER=yCONFIG_PARMAN=mCONFIG_OBJAGG=y
# end of Library routines
CONFIG_POLYNOMIAL=m
#
# Kernel hacking
#
#
# printk and dmesg options # # CONFIG_PRINTK_TIME is not set # CONFIG_PRINTK_CALLER is not set CONFIG_STACKTRACE_BUILD_ID=y CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7 CONFIG_CONSOLE_LOGLEVEL_QUIET=4 CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4 # CONFIG_DYNAMIC_DEBUG is not set CONFIG_DYNAMIC_DEBUG_CORE=y # CONFIG_SYMBOLIC_ERRNAME is not set # end of printk and dmesg options
CONFIG_DEBUG_KERNEL=yCONFIG_DEBUG_MISC=y
#
# Compile-time checks and compiler options
#CONFIG_AS_HAS_NON_CONST_LEB128=y CONFIG_DEBUG_INFO_NONE=y
# CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT is not set # CONFIG_DEBUG_INFO_DWARF4 is not set
# CONFIG_DEBUG_INFO_DWARF5 is not set CONFIG_FRAME_WARN=1024
# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HEADERS_INSTALL=y CONFIG_SECTION_MISMATCH_WARN_ONLY=y
# CONFIG_VMLINUX_MAP is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# end of Compile-time checks and compiler options
#
# Generic Kernel Debugging Instruments
#CONFIG_MAGIC_SYSRQ=yCONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1CONFIG_MAGIC_SYSRQ_SERIAL=yCONFIG_MAGIC_SYSRQ_SERIAL_SEQUENCE=""CONFIG_DEBUG_FS=yCONFIG_DEBUG_FS_ALLOW_ALL=y
# CONFIG_DEBUG_FS_DISALLOW_MOUNT is not set
# CONFIG_DEBUG_FS_ALLOW_NONE is not setCONFIG_HAVE_ARCH_KGDB=yCONFIG_KGDB=y
# CONFIG_KGDB_SERIAL_CONSOLE is not set
# CONFIG_KGDB_TESTS is not set
# CONFIG_KGDB_KDB is not set
# CONFIG_UBSAN is not set
# end of Generic Kernel Debugging Instruments
#
# Networking Debugging
#
# CONFIG_NET_DEV_REFCNT_TRACKER is not setCONFIG_NET_NS_REFCNT_TRACKER=y
# CONFIG_DEBUG_NET is not set
# end of Networking Debugging
#
# Memory Debugging
#CONFIG_PAGE_EXTENSION=y
# CONFIG_DEBUG_PAGEALLOC is not setCONFIG_SLUB_DEBUG=yCONFIG_SLUB_DEBUG_ON=yCONFIG_PAGE_OWNER=y
# CONFIG_PAGE_POISONING is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SHRINKER_DEBUG is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_SCHED_STACK_END_CHECK is not setCONFIG_DEBUG_VM_IRQSOFF=yCONFIG_DEBUG_VM=yCONFIG_DEBUG_VM_MAPLE_TREE=yCONFIG_DEBUG_VM_RB=yCONFIG_DEBUG_VM_PGFLAGS=yCONFIG_DEBUG_MEMORY_INIT=yCONFIG_CC_HAS_KASAN_GENERIC=yCONFIG_CC_HAS_WORKING_NOSANITIZE_ADDRESS=y
# end of Memory Debugging
# CONFIG_DEBUG_SHIRQ is not set
#
# Debug Oops, Lockups and Hangs
#
# CONFIG_PANIC_ON_OOPS is not setCONFIG_PANIC_ON_OOPS_VALUE=0CONFIG_PANIC_TIMEOUT=0CONFIG_LOCKUP_DETECTOR=yCONFIG_SOFTLOCKUP_DETECTOR=yCONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_WQ_WATCHDOG is not setCONFIG_TEST_LOCKUP=m
# end of Debug Oops, Lockups and Hangs
#
# Scheduler Debugging
#
# end of Scheduler Debugging
CONFIG_DEBUG_TIMEKEEPING=y
#
# Lock Debugging (spinlocks, mutexes, etc...)
#CONFIG_LOCK_DEBUGGING_SUPPORT=y
# CONFIG_PROVE_LOCKING is not setCONFIG_LOCK_STAT=yCONFIG_DEBUG_RT_MUTEXES=yCONFIG_DEBUG_SPINLOCK=yCONFIG_DEBUG_MUTEXES=yCONFIG_DEBUG_WW_MUTEX_SLOWPATH=yCONFIG_DEBUG_RWSEMS=yCONFIG_DEBUG_LOCK_ALLOC=yCONFIG_LOCKDEP=yCONFIG_LOCKDEP_BITS=15CONFIG_LOCKDEP_CHAINS_BITS=16CONFIG_LOCKDEP_STACK_TRACE_BITS=19CONFIG_LOCKDEP_STACK_TRACE_HASH_BITS=14CONFIG_LOCKDEP_CIRCULAR_QUEUE_BITS=12
# CONFIG_DEBUG_LOCKDEP is not setCONFIG_DEBUG_LOCKING_API_SELFTESTS=y
# CONFIG_LOCK_TORTURE_TEST is not set
# CONFIG_WW_MUTEX_SELFTEST is not set
# CONFIG_SCF_TORTURE_TEST is not set
# end of Lock Debugging (spinlocks, mutexes, etc...)
# CONFIG_DEBUG_IRQFLAGS is not setCONFIG_STACKTRACE=yCONFIG_WARN_ALL_UNSEEDED_RANDOM=yCONFIG_DEBUG_KOBJECT=y
#
# Debug kernel data structures
#
# CONFIG_DEBUG_LIST is not setCONFIG_DEBUG_PLIST=y
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_BUG_ON_DATA_CORRUPTION is not setCONFIG_DEBUG_MAPLE_TREE=y
# end of Debug kernel data structures
CONFIG_DEBUG_CREDENTIALS=y
#
# RCU Debugging
#CONFIG_TORTURE_TEST=mCONFIG_RCU_SCALE_TEST=m
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_REF_SCALE_TEST is not setCONFIG_RCU_TRACE=y
# CONFIG_RCU_EQS_DEBUG is not set
# end of RCU Debugging
# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not setCONFIG_TRACE_CLOCK=yCONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_SAMPLES is not set
# CONFIG_STRICT_DEVMEM is not set
#
# hexagon Debugging # # end of hexagon Debugging
#
# Kernel Testing and Coverage
#
# CONFIG_KUNIT is not setCONFIG_NOTIFIER_ERROR_INJECTION=yCONFIG_NETDEV_NOTIFIER_ERROR_INJECT=mCONFIG_FAULT_INJECTION=yCONFIG_FAILSLAB=yCONFIG_FAIL_PAGE_ALLOC=y
# CONFIG_FAULT_INJECTION_USERCOPY is not set
# CONFIG_FAIL_FUTEX is not setCONFIG_FAULT_INJECTION_DEBUG_FS=y
# CONFIG_FAIL_MMC_REQUEST is not setCONFIG_FAULT_INJECTION_STACKTRACE_FILTER=yCONFIG_CC_HAS_SANCOV_TRACE_PC=yCONFIG_RUNTIME_TESTING_MENU=yCONFIG_LKDTM=y
# CONFIG_TEST_MIN_HEAP is not set
# CONFIG_TEST_DIV64 is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_TEST_REF_TRACKER is not set
# CONFIG_RBTREE_TEST is not set
# CONFIG_REED_SOLOMON_TEST is not set
# CONFIG_INTERVAL_TREE_TEST is not setCONFIG_PERCPU_TEST=mCONFIG_ATOMIC64_SELFTEST=yCONFIG_TEST_HEXDUMP=mCONFIG_STRING_SELFTEST=y
# CONFIG_TEST_STRING_HELPERS is not setCONFIG_TEST_STRSCPY=m
# CONFIG_TEST_KSTRTOX is not set
# CONFIG_TEST_PRINTF is not setCONFIG_TEST_SCANF=yCONFIG_TEST_BITMAP=yCONFIG_TEST_UUID=y
# CONFIG_TEST_XARRAY is not setCONFIG_TEST_RHASHTABLE=yCONFIG_TEST_SIPHASH=mCONFIG_TEST_IDA=yCONFIG_TEST_PARMAN=mCONFIG_TEST_LKM=m
# CONFIG_TEST_BITOPS is not setCONFIG_TEST_VMALLOC=mCONFIG_TEST_USER_COPY=m
# CONFIG_TEST_BPF is not set
# CONFIG_TEST_BLACKHOLE_DEV is not set
# CONFIG_FIND_BIT_BENCHMARK is not setCONFIG_TEST_FIRMWARE=mCONFIG_TEST_UDELAY=y
# CONFIG_TEST_STATIC_KEYS is not setCONFIG_TEST_MEMCAT_P=y
# CONFIG_TEST_OBJAGG is not set
# CONFIG_TEST_MEMINIT is not setCONFIG_TEST_FREE_PAGES=m
# end of Kernel Testing and Coverage
#
# Rust hacking
#
# end of Rust hacking
CONFIG_WARN_MISSING_DOCUMENTS=yCONFIG_WARN_ABI_ERRORS=y
# end of Kernel hacking
Martin KaFai Lau
reviewerRe: [PATCH bpf-next 06/11] xdp: Carry over xdp metadata into skb context
In reply to Stanislav FomichevQuoted 6 lines · Stanislav Fomichev
Implement new
bpf_xdp_metadata_export_to_skbkfunc which prepares compatible xdp metadata for kernel consumption. This kfunc should be called prior tobpf_redirect
or when XDP_PASS'ing the frame into the kernel (note, the drivers have to be updated to enable consuming XDP_PASS'ed metadata).
Quoted 8 lines
veth driver is amended to consume this metadata when converting to skb.
Internally,
XDP_FLAGS_HAS_SKB_METADATAflag is used to indicate whether the frame has skb metadata. The metadata is currently stored prior toxdp->data_meta.bpf_xdp_adjust_metarefuses to work after a call tobpf_xdp_metadata_export_to_skb(can lift this requirement later on if needed, we'd have to memmovexdp_skb_metadata).
It is ok to refuse bpf_xdp_adjust_meta() after bpf_xdp_metadata_export_to_skb() for now. However, it will also need to refuse bpf_xdp_adjust_head().
[ ... ]
net/core/xdp.c struct xdp_frame *xdpf_clone(struct xdp_frame *xdpf) · line 738
Quoted 8 lines
net/core/xdp.c +8
-0+/* For the packets directed to the kernel, this kfunc exports XDP metadata +* into skb context. +*/ +noinline int bpf_xdp_metadata_export_to_skb(const struct xdp_md *ctx) +{ +return 0 ; +} +
I think it is still better to return 'struct xdp_skb_metata *' instead of true/false. Like:
noinline struct xdp_skb_metata *bpf_xdp_metadata_export_to_skb(const struct xdp_md *ctx)
{
return 0;
}The KF_RET_NULL has already been set in BTF_SET8_START_GLOBAL(xdp_metadata_kfunc_ids). There is "xdp_btf_struct_access()" that can allow write access to 'struct xdp_skb_metata' What else is missing? We can try to solve it.
Then there is no need for this double check in patch 8 selftest which is not easy to use:
+ if (bpf_xdp_metadata_export_to_skb(ctx) < 0) {
+ bpf_printk("bpf_xdp_metadata_export_to_skb failed");
+ return XDP_DROP;
+ }
[ ... ]
+ skb_metadata = ctx->skb_metadata;
+ if (!skb_metadata) {
+ bpf_printk("no ctx->skb_metadata");
+ return XDP_DROP;
+ }
[ ... ]
Quoted 18 lines
tools/include/uapi/linux/bpf.h +6
-0@@ -6116,6 +6116,12 @@ enum xdp_action { XDP_REDIRECT, }; +/* Subset of XDP metadata exported to skb context. +*/ +struct xdp_skb_metadata { +__u64 rx_timestamp; +}; +/* user accessible metadata for XDP packet hook * new fields must be added to the end of this structure */
tools/include/uapi/linux/bpf.h struct xdp_md { · line 6137
Quoted 4 lines
tools/include/uapi/linux/bpf.h +1
-0@@ -6128,6 +6134,7 @@ struct xdp_md {__u32 rx_queue_index;/* rxq->queue_index */ __u32 egress_ifindex;/* txq->dev->ifindex */ + __bpf_md_ptr(struct xdp_skb_metadata *, skb_metadata);
Once the above bpf_xdp_metadata_export_to_skb() returning a pointer works, then it can be another kfunc 'struct xdp_skb_metata * bpf_xdp_get_skb_metadata(const struct xdp_md *ctx)' to return the skb_metadata which was a similar point discussed in the previous RFC.
Re: [xdp-hints] Re: [PATCH bpf-next 06/11] xdp: Carry over xdp metadata into skb context
Quoted 16 lines · Martin KaFai Lau
Quoted 6 lines · Stanislav Fomichev
Implement new
bpf_xdp_metadata_export_to_skbkfunc which prepares compatible xdp metadata for kernel consumption. This kfunc should be called prior tobpf_redirect
or when XDP_PASS'ing the frame into the kernel (note, the drivers have to be updated to enable consuming XDP_PASS'ed metadata).Quoted 8 lines
veth driver is amended to consume this metadata when converting to skb.
Internally,
XDP_FLAGS_HAS_SKB_METADATAflag is used to indicate whether the frame has skb metadata. The metadata is currently stored prior toxdp->data_meta.bpf_xdp_adjust_metarefuses to work after a call tobpf_xdp_metadata_export_to_skb(can lift this requirement later on if needed, we'd have to memmovexdp_skb_metadata).
Quoted 2 lines
It is ok to refuse
bpf_xdp_adjust_meta()afterbpf_xdp_metadata_export_to_skb()for now. However, it will also need to refusebpf_xdp_adjust_head().
I'm also OK with deferring this, although I'm wondering if it isn't just as easy to just add the memmove() straight away? :)
-Toke
Re: [xdp-hints] Re: [PATCH bpf-next 06/11] xdp: Carry over xdp metadata into skb context
Quoted 19 lines · Toke Høiland-Jørgensen
Quoted 16 lines · Martin KaFai Lau
Quoted 14 lines · Stanislav Fomichev
Implement new
bpf_xdp_metadata_export_to_skbkfunc which prepares compatible xdp metadata for kernel consumption. This kfunc should be called prior tobpf_redirect
or when XDP_PASS'ing the frame into the kernel (note, the drivers have to be updated to enable consuming XDP_PASS'ed metadata).veth driver is amended to consume this metadata when converting to skb.
Internally,
XDP_FLAGS_HAS_SKB_METADATAflag is used to indicate whether the frame has skb metadata. The metadata is currently stored prior toxdp->data_meta.bpf_xdp_adjust_metarefuses to work after a call tobpf_xdp_metadata_export_to_skb(can lift this requirement later on if needed, we'd have to memmovexdp_skb_metadata).
Quoted 5 lines
Quoted 2 lines
It is ok to refuse
bpf_xdp_adjust_meta()afterbpf_xdp_metadata_export_to_skb()for now. However, it will also need to refusebpf_xdp_adjust_head().I'm also OK with deferring this, although I'm wondering if it isn't just as easy to just add the
memmove()straight away? :)
SG, let me try that! Martin also mentioned bpf_xdp_adjust_head needs to be taken care of..
Re: [PATCH bpf-next 06/11] xdp: Carry over xdp metadata into skb context
In reply to Martin KaFai LauQuoted 17 lines · Martin KaFai Lau
Quoted 6 lines · Stanislav Fomichev
Implement new
bpf_xdp_metadata_export_to_skbkfunc which prepares compatible xdp metadata for kernel consumption. This kfunc should be called prior tobpf_redirect
or when XDP_PASS'ing the frame into the kernel (note, the drivers have to be updated to enable consuming XDP_PASS'ed metadata).Quoted 8 lines
veth driver is amended to consume this metadata when converting to skb.
Internally,
XDP_FLAGS_HAS_SKB_METADATAflag is used to indicate whether the frame has skb metadata. The metadata is currently stored prior toxdp->data_meta.bpf_xdp_adjust_metarefuses to work after a call tobpf_xdp_metadata_export_to_skb(can lift this requirement later on if needed, we'd have to memmovexdp_skb_metadata).
Quoted 2 lines
It is ok to refuse
bpf_xdp_adjust_meta()afterbpf_xdp_metadata_export_to_skb()for now. However, it will also need to refusebpf_xdp_adjust_head().
Good catch!
Quoted 16 lines
[ ... ]
net/core/xdp.c struct xdp_frame *xdpf_clone(struct xdp_frame *xdpf) · line 738
Quoted 8 lines
net/core/xdp.c +8
-0+/* For the packets directed to the kernel, this kfunc exports XDP metadata +* into skb context. +*/ +noinline int bpf_xdp_metadata_export_to_skb(const struct xdp_md *ctx) +{ +return 0 ; +} +I think it is still better to return 'struct
xdp_skb_metata*' instead of true/false. Like:noinline struct
xdp_skb_metata*bpf_xdp_metadata_export_to_skb(const structxdp_md*ctx)
Quoted 8 lines
{ return 0; }The
KF_RET_NULLhas already been set inBTF_SET8_START_GLOBAL(xdp_metadata_kfunc_ids). There is "xdp_btf_struct_access()" that can allow write access to 'structxdp_skb_metata' What else is missing? We can try to solve it.
Ah, that KF_RET_NULL is a left-over from my previous attempt to return pointers :-)
I can retry with returning a pointer, I don't have a preference, but I felt like returning simple -errno might be more simple api-wise. (with bpf_xdp_metadata_export_to_skb returning NULL vs return loggable errno - I'd prefer the latter, but not strongly)
Quoted 39 lines
Then there is no need for this double check in patch 8 selftest which is not easy to use:
(quoted diff) +9
-0+ if (bpf_xdp_metadata_export_to_skb(ctx) < 0) { + bpf_printk("bpf_xdp_metadata_export_to_skb failed"); + return XDP_DROP; + } + skb_metadata = ctx->skb_metadata; + if (!skb_metadata) { + bpf_printk("no ctx->skb_metadata"); + return XDP_DROP; + }Quoted 22 lines
tools/include/uapi/linux/bpf.h +6
-0@@ -6116,6 +6116,12 @@ enum xdp_action { XDP_REDIRECT, }; +/* Subset of XDP metadata exported to skb context. +*/ +struct xdp_skb_metadata { +__u64 rx_timestamp; +}; +/* user accessible metadata for XDP packet hook * new fields must be added to the end of this structure */ @@ -6128,6 +6134,7 @@ struct xdp_md {__u32 rx_queue_index;/* rxq->queue_index */
Quoted 7 lines
tools/include/uapi/linux/bpf.h struct xdp_md { · line 6137
Quoted 2 lines
tools/include/uapi/linux/bpf.h +1
-0__u32 egress_ifindex;/* txq->dev->ifindex */ + __bpf_md_ptr(struct xdp_skb_metadata *, skb_metadata);Once the above
bpf_xdp_metadata_export_to_skb()returning a pointer works, then it can be another kfunc 'structxdp_skb_metata*bpf_xdp_get_skb_metadata(const struct xdp_md *ctx)' to return theskb_metadatawhich was a similar point discussed in the previous RFC.
I see. I think you've mentioned it previously somewhere to have a kfunc accessor vs uapi field and I totally forgot. Will try to address it, ty!
kernel test robot
build botRe: [PATCH bpf-next 06/11] xdp: Carry over xdp metadata into skb context
In reply to Stanislav FomichevI love your patch! Yet something to improve:
Hi Stanislav,
I love your patch! Yet something to improve:
[auto build test ERROR on bpf-next/master]
url: https://github.com/intel-lab-lkp/linux/commits/Stanislav-Fomichev/xdp-hints-via-kfuncs/20221115-110547 base: https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next.git master patch link: https://lore.kernel.org/r/20221115030210.3159213-7-sdf%40google.com patch subject: [PATCH bpf-next 06/11] xdp: Carry over xdp metadata into skb context config: parisc-randconfig-r006-20221115 compiler: hppa-linux-gcc (GCC) 12.1.0
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross
# https://github.com/intel-lab-lkp/linux/commit/5c7e4e60d13af8491563dd4d2ad5fc684420e540
git remote add linux-review https://github.com/intel-lab-lkp/linux
git fetch --no-tags linux-review Stanislav-Fomichev/xdp-hints-via-kfuncs/20221115-110547
git checkout 5c7e4e60d13af8491563dd4d2ad5fc684420e540
# save the config file
mkdir build_dir && cp config build_dir/.config
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-12.1.0 make.cross W=1 O=build_dir ARCH=parisc SHELL=/bin/bash net/core/
If you fix the issue, kindly add following tag where applicable | Reported-by: kernel test robot <[email protected]>
All errors (new ones prefixed by >>):
In file included from include/linux/netdevice.h:43,
from include/linux/if_vlan.h:10,
from include/linux/filter.h:20,
from net/core/xdp.c:9:
include/net/xdp.h: In function 'xdp_metadata_export_to_skb':
include/net/xdp.h:449:16: error: 'return' with a value, in function returning void [-Werror=return-type]
449 | return 0;
| ^
include/net/xdp.h:447:13: note: declared here
447 | static void xdp_metadata_export_to_skb(const struct bpf_prog *prog, struct bpf_patch *patch)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
net/core/xdp.c: At top level:
net/core/xdp.c:734:14: warning: no previous prototype for 'bpf_xdp_metadata_export_to_skb' [-Wmissing-prototypes]
734 | noinline int bpf_xdp_metadata_export_to_skb(const struct xdp_md *ctx)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
net/core/xdp.c:743:14: warning: no previous prototype for 'bpf_xdp_metadata_rx_timestamp_supported' [-Wmissing-prototypes]
743 | noinline int bpf_xdp_metadata_rx_timestamp_supported(const struct xdp_md *ctx)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
net/core/xdp.c:751:10: warning: type qualifiers ignored on function return type [-Wignored-qualifiers]
751 | noinline const __u64 bpf_xdp_metadata_rx_timestamp(const struct xdp_md *ctx)
| ^~~~~
net/core/xdp.c:751:22: warning: no previous prototype for 'bpf_xdp_metadata_rx_timestamp' [-Wmissing-prototypes]
751 | noinline const __u64 bpf_xdp_metadata_rx_timestamp(const struct xdp_md *ctx)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>> net/core/xdp.c:881:6: error: redefinition of 'xdp_metadata_export_to_skb' 881 | void xdp_metadata_export_to_skb(const struct bpf_prog *prog, struct bpf_patch *patch)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
include/net/xdp.h:447:13: note: previous definition of 'xdp_metadata_export_to_skb' with type 'void(const struct bpf_prog *, struct bpf_patch *)'
447 | static void xdp_metadata_export_to_skb(const struct bpf_prog *prog, struct bpf_patch *patch)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
include/net/xdp.h:447:13: warning: 'xdp_metadata_export_to_skb' defined but not used [-Wunused-function]
cc1: some warnings being treated as errors
vim +/xdp_metadata_export_to_skb +881 net/core/xdp.c
872
873 static int __init xdp_metadata_init(void)
874 {
875 return register_btf_kfunc_id_set(BPF_PROG_TYPE_XDP, &xdp_metadata_kfunc_set);
876 }
877 late_initcall(xdp_metadata_init);
878 #else
879 struct btf_id_set8 xdp_metadata_kfunc_ids = {};
880 EXPORT_SYMBOL(xdp_metadata_kfunc_ids);
> 881 void xdp_metadata_export_to_skb(const struct bpf_prog *prog, struct bpf_patch *patch)
Signature · 2 lines
0-DAY CI Kernel Test Service https://01.org/lkp
#
# Automatically generated file; DO NOT EDIT. # Linux/parisc 6.1.0-rc4 Kernel Configuration #CONFIG_CC_VERSION_TEXT="hppa-linux-gcc (GCC) 12.1.0" CONFIG_CC_IS_GCC=yCONFIG_GCC_VERSION=120100 CONFIG_CLANG_VERSION=0CONFIG_AS_IS_GNU=yCONFIG_AS_VERSION=23800CONFIG_LD_IS_BFD=yCONFIG_LD_VERSION=23800CONFIG_LLD_VERSION=0 CONFIG_CC_HAS_ASM_INLINE=y CONFIG_CC_HAS_NO_PROFILE_FN_ATTR=y CONFIG_PAHOLE_VERSION=123CONFIG_IRQ_WORK=y CONFIG_BUILDTIME_TABLE_SORT=y CONFIG_THREAD_INFO_IN_TASK=y
#
# General setup
#CONFIG_BROKEN_ON_SMP=yCONFIG_INIT_ENV_ARG_LIMIT=32CONFIG_COMPILE_TEST=y
# CONFIG_WERROR is not setCONFIG_LOCALVERSION=""CONFIG_BUILD_SALT=""CONFIG_HAVE_KERNEL_GZIP=yCONFIG_HAVE_KERNEL_BZIP2=yCONFIG_HAVE_KERNEL_LZMA=yCONFIG_HAVE_KERNEL_XZ=yCONFIG_HAVE_KERNEL_LZO=yCONFIG_HAVE_KERNEL_LZ4=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not setCONFIG_KERNEL_XZ=y
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not setCONFIG_DEFAULT_INIT=""CONFIG_DEFAULT_HOSTNAME="(none)"
# CONFIG_SYSVIPC is not setCONFIG_POSIX_MQUEUE=yCONFIG_WATCH_QUEUE=y
# CONFIG_CROSS_MEMORY_ATTACH is not set
# CONFIG_USELIB is not set
# CONFIG_AUDIT is not setCONFIG_HAVE_ARCH_AUDITSYSCALL=y
#
# IRQ subsystem
#CONFIG_GENERIC_IRQ_PROBE=yCONFIG_GENERIC_IRQ_INJECTION=yCONFIG_IRQ_DOMAIN=yCONFIG_IRQ_SIM=yCONFIG_GENERIC_IRQ_DEBUGFS=y
# end of IRQ subsystem
CONFIG_LEGACY_TIMER_TICK=yCONFIG_TIME_KUNIT_TEST=yCONFIG_BPF=y
#
# BPF subsystem
#
# CONFIG_BPF_SYSCALL is not set
# end of BPF subsystem
CONFIG_PREEMPT_VOLUNTARY_BUILD=y
# CONFIG_PREEMPT_NONE is not setCONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not setCONFIG_PREEMPT_COUNT=y
#
# CPU/Task time and stats accounting
#CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_PSI is not set
# end of CPU/Task time and stats accounting
CONFIG_CPU_ISOLATION=y
#
# RCU Subsystem
#CONFIG_TINY_RCU=y
# CONFIG_RCU_EXPERT is not setCONFIG_SRCU=yCONFIG_TINY_SRCU=yCONFIG_TASKS_RCU_GENERIC=yCONFIG_TASKS_RUDE_RCU=yCONFIG_RCU_NEED_SEGCBLIST=y
# end of RCU Subsystem
# CONFIG_IKCONFIG is not setCONFIG_IKHEADERS=yCONFIG_GENERIC_SCHED_CLOCK=y
#
# Scheduler features
#
# end of Scheduler features
CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough=5" CONFIG_GCC12_NO_ARRAY_BOUNDS=y CONFIG_CC_NO_ARRAY_BOUNDS=yCONFIG_CGROUPS=yCONFIG_PAGE_COUNTER=y CONFIG_CGROUP_FAVOR_DYNMODS=yCONFIG_MEMCG=yCONFIG_BLK_CGROUP=yCONFIG_CGROUP_WRITEBACK=yCONFIG_CGROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
# CONFIG_RT_GROUP_SCHED is not set
# CONFIG_CGROUP_PIDS is not set CONFIG_CGROUP_RDMA=yCONFIG_CGROUP_FREEZER=yCONFIG_CGROUP_DEVICE=y
# CONFIG_CGROUP_CPUACCT is not set
# CONFIG_CGROUP_PERF is not set CONFIG_CGROUP_MISC=y
# CONFIG_CGROUP_DEBUG is not set CONFIG_SOCK_CGROUP_DATA=y
# CONFIG_SCHED_AUTOGROUP is not set CONFIG_SYSFS_DEPRECATED=y
# CONFIG_SYSFS_DEPRECATED_V2 is not set CONFIG_RELAY=yCONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE=""CONFIG_RD_GZIP=yCONFIG_RD_BZIP2=y
# CONFIG_RD_LZMA is not set
# CONFIG_RD_XZ is not set
# CONFIG_RD_LZO is not setCONFIG_RD_LZ4=y
# CONFIG_RD_ZSTD is not setCONFIG_BOOT_CONFIG=yCONFIG_BOOT_CONFIG_EMBED=y CONFIG_BOOT_CONFIG_EMBED_FILE=""
# CONFIG_INITRAMFS_PRESERVE_MTIME is not set
# CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL_EXCEPTION_TRACE=y CONFIG_SYSCTL_ARCH_UNALIGN_ALLOW=y CONFIG_EXPERT=y
# CONFIG_MULTIUSER is not set CONFIG_SGETMASK_SYSCALL=yCONFIG_SYSFS_SYSCALL=y
# CONFIG_FHANDLE is not set
# CONFIG_POSIX_TIMERS is not set
# CONFIG_PRINTK is not setCONFIG_BUG=y
# CONFIG_ELF_CORE is not set
# CONFIG_BASE_FULL is not set
# CONFIG_FUTEX is not setCONFIG_EPOLL=y
# CONFIG_SIGNALFD is not set
# CONFIG_TIMERFD is not setCONFIG_EVENTFD=y
# CONFIG_SHMEM is not set
# CONFIG_AIO is not setCONFIG_IO_URING=yCONFIG_ADVISE_SYSCALLS=yCONFIG_MEMBARRIER=yCONFIG_KALLSYMS=yCONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_BASE_RELATIVE=y
# CONFIG_KCMP is not set
# CONFIG_EMBEDDED is not set CONFIG_HAVE_PERF_EVENTS=y
# CONFIG_PC104 is not set
#
# Kernel Performance Events And Counters
#CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
# end of Kernel Performance Events And Counters
# CONFIG_PROFILING is not setCONFIG_TRACEPOINTS=y
# end of General setup
CONFIG_PARISC=yCONFIG_CPU_BIG_ENDIAN=yCONFIG_MMU=yCONFIG_STACK_GROWSUP=yCONFIG_GENERIC_BUG=yCONFIG_GENERIC_HWEIGHT=yCONFIG_GENERIC_CALIBRATE_DELAY=yCONFIG_STACKTRACE_SUPPORT=yCONFIG_PGTABLE_LEVELS=2
#
# Processor type and features
#
# CONFIG_PA7000 is not setCONFIG_PA7100LC=y
# CONFIG_PA7200 is not set
# CONFIG_PA7300LC is not set
# CONFIG_PA8X00 is not setCONFIG_PA11=yCONFIG_PARISC_HUGE_KERNEL=yCONFIG_PARISC_PAGE_SIZE_4KB=y
# CONFIG_SMP is not setCONFIG_IRQSTACKS=yCONFIG_ARCH_FLATMEM_ENABLE=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not setCONFIG_HZ_300=y
# CONFIG_HZ_1000 is not setCONFIG_HZ=300CONFIG_AUDIT_ARCH=yCONFIG_KEXEC=yCONFIG_KEXEC_FILE=y
# end of Processor type and features
#
# Bus options (PCI, PCMCIA, EISA, GSC, ISA)
#
# CONFIG_GSC is not set
# end of Bus options (PCI, PCMCIA, EISA, GSC, ISA)
#
# PA-RISC specific drivers
#CONFIG_CHASSIS_LCD_LED=yCONFIG_PDC_CHASSIS=y
# CONFIG_PDC_STABLE is not set
# end of PA-RISC specific drivers
#
# General architecture-dependent options
#CONFIG_CRASH_CORE=yCONFIG_KEXEC_CORE=yCONFIG_KEXEC_ELF=y
# CONFIG_JUMP_LABEL is not setCONFIG_HAVE_KPROBES=yCONFIG_HAVE_KRETPROBES=yCONFIG_HAVE_KPROBES_ON_FTRACE=yCONFIG_TRACE_IRQFLAGS_SUPPORT=yCONFIG_HAVE_ARCH_TRACEHOOK=yCONFIG_GENERIC_SMP_IDLE_THREAD=yCONFIG_ARCH_32BIT_OFF_T=yCONFIG_HAVE_REGS_AND_STACK_ACCESS_API=yCONFIG_HAVE_ARCH_JUMP_LABEL=yCONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=yCONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=yCONFIG_HAVE_ARCH_SECCOMP=yCONFIG_HAVE_ARCH_SECCOMP_FILTER=yCONFIG_SECCOMP=yCONFIG_SECCOMP_FILTER=yCONFIG_LTO_NONE=yCONFIG_HAVE_MOD_ARCH_SPECIFIC=yCONFIG_MODULES_USE_ELF_RELA=yCONFIG_HAVE_SOFTIRQ_ON_OWN_STACK=yCONFIG_SOFTIRQ_ON_OWN_STACK=yCONFIG_ALTERNATE_USER_ADDRESS_SPACE=yCONFIG_ARCH_HAS_ELF_RANDOMIZE=yCONFIG_PAGE_SIZE_LESS_THAN_64KB=yCONFIG_PAGE_SIZE_LESS_THAN_256KB=yCONFIG_HAVE_RELIABLE_STACKTRACE=yCONFIG_HAVE_ARCH_HASH=yCONFIG_CLONE_BACKWARDS=yCONFIG_COMPAT_32BIT_TIME=yCONFIG_CPU_NO_EFFICIENT_FFS=yCONFIG_ARCH_HAS_STRICT_KERNEL_RWX=yCONFIG_STRICT_KERNEL_RWX=yCONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
# CONFIG_LOCK_EVENT_COUNTS is not set
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
# end of GCOV-based kernel profiling # end of General architecture-dependent options
CONFIG_RT_MUTEXES=yCONFIG_BASE_SMALL=1
# CONFIG_MODULES is not setCONFIG_INIT_ALL_POSSIBLE=yCONFIG_BLOCK=yCONFIG_BLOCK_LEGACY_AUTOLOAD=yCONFIG_BLK_CGROUP_RWSTAT=yCONFIG_BLK_DEV_BSG_COMMON=yCONFIG_BLK_ICQ=yCONFIG_BLK_DEV_BSGLIB=yCONFIG_BLK_DEV_INTEGRITY=yCONFIG_BLK_DEV_INTEGRITY_T10=yCONFIG_BLK_DEV_ZONED=yCONFIG_BLK_DEV_THROTTLING=yCONFIG_BLK_DEV_THROTTLING_LOW=y
# CONFIG_BLK_WBT is not setCONFIG_BLK_CGROUP_IOLATENCY=yCONFIG_BLK_CGROUP_FC_APPID=y
# CONFIG_BLK_CGROUP_IOCOST is not set
# CONFIG_BLK_CGROUP_IOPRIO is not set
# CONFIG_BLK_DEBUG_FS is not setCONFIG_BLK_SED_OPAL=y
# CONFIG_BLK_INLINE_ENCRYPTION is not set
#
# Partition Types
#CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not setCONFIG_AIX_PARTITION=yCONFIG_OSF_PARTITION=y
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
# CONFIG_MSDOS_PARTITION is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not setCONFIG_KARMA_PARTITION=yCONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not setCONFIG_CMDLINE_PARTITION=y
# end of Partition Types
CONFIG_BLK_MQ_VIRTIO=y
#
# IO Schedulers
#CONFIG_MQ_IOSCHED_DEADLINE=y
# CONFIG_MQ_IOSCHED_KYBER is not setCONFIG_IOSCHED_BFQ=yCONFIG_BFQ_GROUP_IOSCHED=yCONFIG_BFQ_CGROUP_DEBUG=y
# end of IO Schedulers
CONFIG_ASN1=yCONFIG_INLINE_SPIN_UNLOCK_IRQ=yCONFIG_INLINE_READ_UNLOCK=yCONFIG_INLINE_READ_UNLOCK_IRQ=yCONFIG_INLINE_WRITE_UNLOCK=yCONFIG_INLINE_WRITE_UNLOCK_IRQ=yCONFIG_FREEZER=y
#
# Executable file formats
#CONFIG_BINFMT_ELF=yCONFIG_BINFMT_ELF_KUNIT_TEST=yCONFIG_ELFCORE=yCONFIG_BINFMT_SCRIPT=yCONFIG_BINFMT_MISC=yCONFIG_COREDUMP=y
# end of Executable file formats
#
# Memory Management options
#CONFIG_SWAP=y
# CONFIG_ZSWAP is not set
#
# SLAB allocator options
#
# CONFIG_SLAB is not set
# CONFIG_SLUB is not setCONFIG_SLOB=y
# end of SLAB allocator options
# CONFIG_SHUFFLE_PAGE_ALLOCATOR is not set
# CONFIG_COMPAT_BRK is not setCONFIG_FLATMEM=yCONFIG_MEMORY_ISOLATION=yCONFIG_EXCLUSIVE_SYSTEM_RAM=yCONFIG_SPLIT_PTLOCK_CPUS=999999
# CONFIG_COMPACTION is not setCONFIG_PAGE_REPORTING=yCONFIG_MIGRATION=yCONFIG_CONTIG_ALLOC=y
# CONFIG_KSM is not setCONFIG_DEFAULT_MMAP_MIN_ADDR=4096CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=yCONFIG_MEMORY_FAILURE=yCONFIG_NEED_PER_CPU_KM=yCONFIG_CMA=yCONFIG_CMA_DEBUG=yCONFIG_CMA_DEBUGFS=y
# CONFIG_CMA_SYSFS is not setCONFIG_CMA_AREAS=7CONFIG_STACK_MAX_DEFAULT_SIZE_MB=100CONFIG_PAGE_IDLE_FLAG=yCONFIG_IDLE_PAGE_TRACKING=yCONFIG_VM_EVENT_COUNTERS=y
# CONFIG_PERCPU_STATS is not set
# CONFIG_GUP_TEST is not setCONFIG_ARCH_HAS_PTE_SPECIAL=yCONFIG_USERFAULTFD=y
# CONFIG_LRU_GEN is not set
#
# Data Access Monitoring
#
# CONFIG_DAMON is not set
# end of Data Access Monitoring # end of Memory Management options
CONFIG_NET=y
#
# Networking options
#CONFIG_PACKET=y
# CONFIG_PACKET_DIAG is not set CONFIG_UNIX=yCONFIG_UNIX_SCM=yCONFIG_AF_UNIX_OOB=y
# CONFIG_UNIX_DIAG is not set
# CONFIG_INET is not set CONFIG_NETWORK_SECMARK=y
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set # CONFIG_NETFILTER is not set
# CONFIG_ATM is not setCONFIG_STP=yCONFIG_BRIDGE=y
# CONFIG_BRIDGE_MRP is not set CONFIG_BRIDGE_CFM=y
# CONFIG_VLAN_8021Q is not setCONFIG_LLC=yCONFIG_LLC2=yCONFIG_ATALK=yCONFIG_DEV_APPLETALK=yCONFIG_IPDDP=y
# CONFIG_IPDDP_ENCAP is not setCONFIG_X25=yCONFIG_LAPB=yCONFIG_PHONET=yCONFIG_IEEE802154=y
# CONFIG_IEEE802154_NL802154_EXPERIMENTAL is not set CONFIG_IEEE802154_SOCKET=y CONFIG_MAC802154=yCONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#CONFIG_NET_SCH_CBQ=yCONFIG_NET_SCH_HTB=y
# CONFIG_NET_SCH_HFSC is not setCONFIG_NET_SCH_PRIO=yCONFIG_NET_SCH_MULTIQ=yCONFIG_NET_SCH_RED=yCONFIG_NET_SCH_SFB=yCONFIG_NET_SCH_SFQ=yCONFIG_NET_SCH_TEQL=yCONFIG_NET_SCH_TBF=y
# CONFIG_NET_SCH_CBS is not setCONFIG_NET_SCH_ETF=yCONFIG_NET_SCH_TAPRIO=y
# CONFIG_NET_SCH_GRED is not setCONFIG_NET_SCH_DSMARK=y
# CONFIG_NET_SCH_NETEM is not setCONFIG_NET_SCH_DRR=yCONFIG_NET_SCH_MQPRIO=yCONFIG_NET_SCH_SKBPRIO=yCONFIG_NET_SCH_CHOKE=yCONFIG_NET_SCH_QFQ=yCONFIG_NET_SCH_CODEL=yCONFIG_NET_SCH_FQ_CODEL=yCONFIG_NET_SCH_CAKE=y
# CONFIG_NET_SCH_FQ is not setCONFIG_NET_SCH_HHF=yCONFIG_NET_SCH_PIE=y
# CONFIG_NET_SCH_FQ_PIE is not setCONFIG_NET_SCH_PLUG=y
# CONFIG_NET_SCH_ETS is not setCONFIG_NET_SCH_DEFAULT=y
# CONFIG_DEFAULT_CODEL is not setCONFIG_DEFAULT_FQ_CODEL=y
# CONFIG_DEFAULT_SFQ is not set
# CONFIG_DEFAULT_PFIFO_FAST is not setCONFIG_DEFAULT_NET_SCH="fq_codel"
#
# Classification
#CONFIG_NET_CLS=y
# CONFIG_NET_CLS_BASIC is not setCONFIG_NET_CLS_TCINDEX=yCONFIG_NET_CLS_FW=yCONFIG_NET_CLS_U32=y
# CONFIG_CLS_U32_PERF is not setCONFIG_CLS_U32_MARK=yCONFIG_NET_CLS_RSVP=yCONFIG_NET_CLS_RSVP6=y
# CONFIG_NET_CLS_FLOW is not setCONFIG_NET_CLS_CGROUP=yCONFIG_NET_CLS_BPF=yCONFIG_NET_CLS_FLOWER=yCONFIG_NET_CLS_MATCHALL=y
# CONFIG_NET_EMATCH is not set
# CONFIG_NET_CLS_ACT is not setCONFIG_NET_SCH_FIFO=yCONFIG_DCB=yCONFIG_DNS_RESOLVER=y
# CONFIG_BATMAN_ADV is not set
# CONFIG_VSOCKETS is not set
# CONFIG_NETLINK_DIAG is not set
# CONFIG_MPLS is not setCONFIG_NET_NSH=y
# CONFIG_HSR is not setCONFIG_QRTR=y
# CONFIG_QRTR_SMD is not setCONFIG_QRTR_TUN=y
# CONFIG_CGROUP_NET_PRIO is not setCONFIG_CGROUP_NET_CLASSID=yCONFIG_NET_RX_BUSY_POLL=yCONFIG_BQL=y
#
# Network testing
#
# end of Network testing # end of Networking options
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_BT is not set
# CONFIG_MCTP is not set
# CONFIG_WIRELESS is not setCONFIG_RFKILL=yCONFIG_RFKILL_LEDS=y
# CONFIG_RFKILL_INPUT is not setCONFIG_RFKILL_GPIO=yCONFIG_NET_9P=yCONFIG_NET_9P_FD=yCONFIG_NET_9P_VIRTIO=yCONFIG_NET_9P_DEBUG=yCONFIG_CAIF=y
# CONFIG_CAIF_DEBUG is not set
# CONFIG_CAIF_NETDEV is not setCONFIG_CAIF_USB=yCONFIG_NFC=yCONFIG_NFC_DIGITAL=yCONFIG_NFC_NCI=yCONFIG_NFC_NCI_SPI=yCONFIG_NFC_NCI_UART=yCONFIG_NFC_HCI=y
# CONFIG_NFC_SHDLC is not set
#
# Near Field Communication (NFC) devices
#CONFIG_NFC_TRF7970A=y
# CONFIG_NFC_SIM is not set
# CONFIG_NFC_VIRTUAL_NCI is not setCONFIG_NFC_FDP=y
# CONFIG_NFC_FDP_I2C is not setCONFIG_NFC_PN533=yCONFIG_NFC_PN533_I2C=y
# CONFIG_NFC_PN532_UART is not set
# CONFIG_NFC_MRVL_UART is not setCONFIG_NFC_ST_NCI=yCONFIG_NFC_ST_NCI_I2C=yCONFIG_NFC_ST_NCI_SPI=yCONFIG_NFC_NXP_NCI=yCONFIG_NFC_NXP_NCI_I2C=yCONFIG_NFC_S3FWRN5=yCONFIG_NFC_S3FWRN5_I2C=yCONFIG_NFC_S3FWRN82_UART=yCONFIG_NFC_ST95HF=y
# end of Near Field Communication (NFC) devices
# CONFIG_PSAMPLE is not set
# CONFIG_NET_IFE is not set
# CONFIG_LWTUNNEL is not setCONFIG_FAILOVER=yCONFIG_ETHTOOL_NETLINK=yCONFIG_NETDEV_ADDR_LIST_TEST=y
#
# Device Drivers
#CONFIG_HAVE_PCI=y
# CONFIG_PCI is not set
# CONFIG_PCCARD is not set
#
# Generic Driver Options
#CONFIG_AUXILIARY_BUS=yCONFIG_UEVENT_HELPER=yCONFIG_UEVENT_HELPER_PATH=""
# CONFIG_DEVTMPFS is not setCONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
#
# Firmware loader
#CONFIG_FW_LOADER=yCONFIG_FW_LOADER_PAGED_BUF=yCONFIG_FW_LOADER_SYSFS=yCONFIG_EXTRA_FIRMWARE=""CONFIG_FW_LOADER_USER_HELPER=yCONFIG_FW_LOADER_USER_HELPER_FALLBACK=y
# CONFIG_FW_LOADER_COMPRESS is not setCONFIG_FW_UPLOAD=y
# end of Firmware loader
CONFIG_ALLOW_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not setCONFIG_DEBUG_DEVRES=yCONFIG_DEBUG_TEST_DRIVER_REMOVE=yCONFIG_PM_QOS_KUNIT_TEST=yCONFIG_DRIVER_PE_KUNIT_TEST=yCONFIG_GENERIC_CPU_DEVICES=yCONFIG_REGMAP=yCONFIG_REGMAP_I2C=yCONFIG_REGMAP_SLIMBUS=yCONFIG_REGMAP_SPI=yCONFIG_REGMAP_W1=yCONFIG_REGMAP_MMIO=yCONFIG_REGMAP_IRQ=yCONFIG_REGMAP_SPI_AVMM=yCONFIG_DMA_SHARED_BUFFER=y
# CONFIG_DMA_FENCE_TRACE is not set
# end of Generic Driver Options
#
# Bus devices
#
# CONFIG_ARM_INTEGRATOR_LM is not set
# CONFIG_BT1_APB is not set
# CONFIG_BT1_AXI is not set
# CONFIG_MOXTET is not set
# CONFIG_INTEL_IXP4XX_EB is not set
# CONFIG_QCOM_EBI2 is not set
# CONFIG_MHI_BUS is not setCONFIG_MHI_BUS_EP=y
# end of Bus devices
CONFIG_CONNECTOR=y
# CONFIG_PROC_EVENTS is not set
#
# Firmware Drivers
#
#
# ARM System Control and Management Interface Protocol #
# CONFIG_ARM_SCMI_PROTOCOL is not set CONFIG_ARM_SCMI_POWER_DOMAIN=y
# CONFIG_ARM_SCMI_POWER_CONTROL is not set
# end of ARM System Control and Management Interface Protocol
CONFIG_ARM_SCPI_POWER_DOMAIN=yCONFIG_FIRMWARE_MEMMAP=y
# CONFIG_FW_CFG_SYSFS is not set
# CONFIG_BCM47XX_NVRAM is not setCONFIG_GOOGLE_FIRMWARE=y
# CONFIG_GOOGLE_COREBOOT_TABLE is not set
#
# Tegra firmware driver
#
# end of Tegra firmware driver # end of Firmware Drivers
CONFIG_GNSS=yCONFIG_GNSS_SERIAL=y
# CONFIG_GNSS_MTK_SERIAL is not setCONFIG_GNSS_SIRF_SERIAL=yCONFIG_GNSS_UBX_SERIAL=yCONFIG_MTD=y
#
# Partition parsers
#CONFIG_MTD_AR7_PARTS=y
# CONFIG_MTD_BCM63XX_PARTS is not set
# CONFIG_MTD_BRCM_U_BOOT is not set
# CONFIG_MTD_CMDLINE_PARTS is not setCONFIG_MTD_OF_PARTS=y
# CONFIG_MTD_OF_PARTS_BCM4908 is not set
# CONFIG_MTD_OF_PARTS_LINKSYS_NS is not set
# CONFIG_MTD_PARSER_IMAGETAG is not set
# CONFIG_MTD_PARSER_TRX is not set
# CONFIG_MTD_SHARPSL_PARTS is not setCONFIG_MTD_REDBOOT_PARTS=yCONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not setCONFIG_MTD_REDBOOT_PARTS_READONLY=y
# end of Partition parsers
#
# User Modules And Translation Layers
#CONFIG_MTD_BLKDEVS=yCONFIG_MTD_BLOCK=y
#
# Note that in some cases UBI block is preferred. See MTD_UBI_BLOCK. #CONFIG_FTL=yCONFIG_NFTL=yCONFIG_NFTL_RW=y
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not setCONFIG_SSFDC=y
# CONFIG_SM_FTL is not setCONFIG_MTD_OOPS=y
# CONFIG_MTD_SWAP is not set CONFIG_MTD_PARTITIONED_MASTER=y
#
# RAM/ROM/Flash chip drivers
#CONFIG_MTD_CFI=yCONFIG_MTD_JEDECPROBE=yCONFIG_MTD_GEN_PROBE=yCONFIG_MTD_CFI_ADV_OPTIONS=y
# CONFIG_MTD_CFI_NOSWAP is not set
# CONFIG_MTD_CFI_BE_BYTE_SWAP is not setCONFIG_MTD_CFI_LE_BYTE_SWAP=yCONFIG_MTD_CFI_GEOMETRY=y
# CONFIG_MTD_MAP_BANK_WIDTH_1 is not setCONFIG_MTD_MAP_BANK_WIDTH_2=yCONFIG_MTD_MAP_BANK_WIDTH_4=yCONFIG_MTD_MAP_BANK_WIDTH_8=yCONFIG_MTD_MAP_BANK_WIDTH_16=y
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not setCONFIG_MTD_CFI_I1=y
# CONFIG_MTD_CFI_I2 is not setCONFIG_MTD_CFI_I4=y
# CONFIG_MTD_CFI_I8 is not setCONFIG_MTD_OTP=yCONFIG_MTD_CFI_INTELEXT=yCONFIG_MTD_CFI_AMDSTD=y
# CONFIG_MTD_CFI_STAA is not setCONFIG_MTD_CFI_UTIL=yCONFIG_MTD_RAM=yCONFIG_MTD_ROM=yCONFIG_MTD_ABSENT=y
# end of RAM/ROM/Flash chip drivers
#
# Mapping drivers for chip access
#CONFIG_MTD_COMPLEX_MAPPINGS=yCONFIG_MTD_PHYSMAP=y
# CONFIG_MTD_PHYSMAP_COMPAT is not set
# CONFIG_MTD_PHYSMAP_OF is not setCONFIG_MTD_PHYSMAP_GPIO_ADDR=y
# CONFIG_MTD_SC520CDP is not set
# CONFIG_MTD_NETSC520 is not set
# CONFIG_MTD_TS5500 is not set
# CONFIG_MTD_PLATRAM is not set
# end of Mapping drivers for chip access
#
# Self-contained MTD device drivers
#CONFIG_MTD_DATAFLASH=y
# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
# CONFIG_MTD_DATAFLASH_OTP is not setCONFIG_MTD_MCHP23K256=yCONFIG_MTD_MCHP48L640=yCONFIG_MTD_SPEAR_SMI=y
# CONFIG_MTD_SST25L is not set
# CONFIG_MTD_SLRAM is not setCONFIG_MTD_PHRAM=yCONFIG_MTD_MTDRAM=yCONFIG_MTDRAM_TOTAL_SIZE=4096CONFIG_MTDRAM_ERASE_SIZE=128CONFIG_MTD_BLOCK2MTD=y
#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOCG3 is not set
# end of Self-contained MTD device drivers
#
# NAND
#CONFIG_MTD_NAND_CORE=y
# CONFIG_MTD_ONENAND is not set
# CONFIG_MTD_RAW_NAND is not set
# CONFIG_MTD_SPI_NAND is not set
#
# ECC engine support
#CONFIG_MTD_NAND_ECC=y
# CONFIG_MTD_NAND_ECC_SW_HAMMING is not setCONFIG_MTD_NAND_ECC_SW_BCH=y
# CONFIG_MTD_NAND_ECC_MXIC is not set
# CONFIG_MTD_NAND_ECC_MEDIATEK is not set
# end of ECC engine support # end of NAND
#
# LPDDR & LPDDR2 PCM memory drivers
#
# CONFIG_MTD_LPDDR is not set
# end of LPDDR & LPDDR2 PCM memory drivers
CONFIG_MTD_SPI_NOR=y
# CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set CONFIG_MTD_SPI_NOR_SWP_DISABLE=y
# CONFIG_MTD_SPI_NOR_SWP_DISABLE_ON_VOLATILE is not set # CONFIG_MTD_SPI_NOR_SWP_KEEP is not set
# CONFIG_SPI_HISI_SFC is not set
# CONFIG_SPI_NXP_SPIFI is not set CONFIG_MTD_UBI=y CONFIG_MTD_UBI_WL_THRESHOLD=4096 CONFIG_MTD_UBI_BEB_LIMIT=20
# CONFIG_MTD_UBI_FASTMAP is not set CONFIG_MTD_UBI_GLUEBI=y
# CONFIG_MTD_UBI_BLOCK is not set CONFIG_MTD_HYPERBUS=y
# CONFIG_HBMC_AM654 is not setCONFIG_OF=y
# CONFIG_OF_UNITTEST is not set
# CONFIG_OF_ALL_DTBS is not set CONFIG_OF_KOBJ=yCONFIG_OF_DYNAMIC=yCONFIG_OF_ADDRESS=yCONFIG_OF_IRQ=y
# CONFIG_OF_OVERLAY is not set CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y CONFIG_PARPORT=yCONFIG_PARPORT_PC=yCONFIG_PARPORT_PC_FIFO=y
# CONFIG_PARPORT_AX88796 is not set
# CONFIG_PARPORT_1284 is not set
# CONFIG_BLK_DEV is not set
#
# NVME Support
#CONFIG_NVME_COMMON=yCONFIG_NVME_CORE=y
# CONFIG_NVME_MULTIPATH is not setCONFIG_NVME_VERBOSE_ERRORS=yCONFIG_NVME_HWMON=yCONFIG_NVME_FABRICS=yCONFIG_NVME_FC=y
# CONFIG_NVME_AUTH is not setCONFIG_NVME_TARGET=yCONFIG_NVME_TARGET_PASSTHRU=yCONFIG_NVME_TARGET_LOOP=y
# CONFIG_NVME_TARGET_FC is not setCONFIG_NVME_TARGET_AUTH=y
# end of NVME Support
#
# Misc devices
#CONFIG_SENSORS_LIS3LV02D=yCONFIG_AD525X_DPOT=y
# CONFIG_AD525X_DPOT_I2C is not setCONFIG_AD525X_DPOT_SPI=y
# CONFIG_DUMMY_IRQ is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ATMEL_SSC is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_GEHC_ACHC is not set
# CONFIG_QCOM_COINCELL is not setCONFIG_APDS9802ALS=yCONFIG_ISL29003=yCONFIG_ISL29020=yCONFIG_SENSORS_TSL2550=yCONFIG_SENSORS_BH1770=yCONFIG_SENSORS_APDS990X=y
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not setCONFIG_LATTICE_ECP3_CONFIG=y
# CONFIG_SRAM is not setCONFIG_XILINX_SDFEC=y
# CONFIG_VCPU_STALL_DETECTOR is not setCONFIG_C2PORT=y
#
# EEPROM support
#CONFIG_EEPROM_AT24=yCONFIG_EEPROM_AT25=y
# CONFIG_EEPROM_LEGACY is not setCONFIG_EEPROM_MAX6875=yCONFIG_EEPROM_93CX6=y
# CONFIG_EEPROM_93XX46 is not setCONFIG_EEPROM_IDT_89HPESX=yCONFIG_EEPROM_EE1004=y
# end of EEPROM support
#
# Texas Instruments shared transport line discipline #CONFIG_TI_ST=y
# end of Texas Instruments shared transport line discipline
CONFIG_SENSORS_LIS3_SPI=y
# CONFIG_SENSORS_LIS3_I2C is not setCONFIG_ALTERA_STAPL=y
# CONFIG_ECHO is not set
# CONFIG_UACCE is not set
# CONFIG_PVPANIC is not set
# end of Misc devices
#
# SCSI device support
#CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not setCONFIG_SCSI_COMMON=yCONFIG_SCSI=yCONFIG_SCSI_DMA=yCONFIG_SCSI_NETLINK=y
#
# SCSI support type (disk, tape, CD-ROM)
#CONFIG_BLK_DEV_SD=yCONFIG_CHR_DEV_ST=y
# CONFIG_CHR_DEV_SG is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_CHR_DEV_SCH is not set
# CONFIG_SCSI_CONSTANTS is not setCONFIG_SCSI_LOGGING=y
# CONFIG_SCSI_SCAN_ASYNC is not set
#
# SCSI Transports
#CONFIG_SCSI_SPI_ATTRS=yCONFIG_SCSI_FC_ATTRS=y
# CONFIG_SCSI_ISCSI_ATTRS is not setCONFIG_SCSI_SAS_ATTRS=yCONFIG_SCSI_SAS_LIBSAS=yCONFIG_SCSI_SAS_ATA=y
# CONFIG_SCSI_SAS_HOST_SMP is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# end of SCSI Transports
CONFIG_SCSI_LOWLEVEL=yCONFIG_ISCSI_BOOT_SYSFS=y
# CONFIG_SCSI_HISI_SAS is not setCONFIG_LIBFC=yCONFIG_LIBFCOE=y
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not setCONFIG_SCSI_DEBUG=y
# CONFIG_SCSI_VIRTIO is not setCONFIG_SCSI_DH=yCONFIG_SCSI_DH_RDAC=yCONFIG_SCSI_DH_HP_SW=yCONFIG_SCSI_DH_EMC=y
# CONFIG_SCSI_DH_ALUA is not set
# end of SCSI device support
CONFIG_ATA=yCONFIG_SATA_HOST=yCONFIG_ATA_VERBOSE_ERROR=yCONFIG_ATA_FORCE=yCONFIG_SATA_PMP=y
#
# Controllers with non-SFF native interface
#
# CONFIG_SATA_AHCI_PLATFORM is not set
# CONFIG_AHCI_BRCM is not set
# CONFIG_AHCI_DA850 is not set
# CONFIG_AHCI_DM816 is not setCONFIG_AHCI_DWC=y
# CONFIG_AHCI_ST is not set
# CONFIG_AHCI_IMX is not setCONFIG_AHCI_CEVA=y
# CONFIG_AHCI_MTK is not set
# CONFIG_AHCI_MVEBU is not set
# CONFIG_AHCI_SUNXI is not set
# CONFIG_AHCI_TEGRA is not set
# CONFIG_AHCI_XGENE is not setCONFIG_AHCI_QORIQ=y
# CONFIG_SATA_FSL is not set
# CONFIG_SATA_GEMINI is not set
# CONFIG_SATA_AHCI_SEATTLE is not set
# CONFIG_ATA_SFF is not set
# CONFIG_MD is not setCONFIG_TARGET_CORE=y
# CONFIG_TCM_IBLOCK is not setCONFIG_TCM_FILEIO=y
# CONFIG_TCM_PSCSI is not setCONFIG_TCM_USER2=yCONFIG_LOOPBACK_TARGET=yCONFIG_TCM_FC=y
#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# end of IEEE 1394 (FireWire) support
# CONFIG_NETDEVICES is not set
#
# Input device support
#CONFIG_INPUT=yCONFIG_INPUT_LEDS=yCONFIG_INPUT_FF_MEMLESS=y
# CONFIG_INPUT_SPARSEKMAP is not setCONFIG_INPUT_MATRIXKMAP=yCONFIG_INPUT_VIVALDIFMAP=y
#
# Userland interfaces
#CONFIG_INPUT_MOUSEDEV=yCONFIG_INPUT_MOUSEDEV_PSAUX=yCONFIG_INPUT_MOUSEDEV_SCREEN_X=1024CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768CONFIG_INPUT_JOYDEV=y
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADC is not set
# CONFIG_KEYBOARD_ADP5520 is not set
# CONFIG_KEYBOARD_ADP5588 is not setCONFIG_KEYBOARD_ADP5589=y
# CONFIG_KEYBOARD_ATKBD is not set
# CONFIG_KEYBOARD_QT1050 is not setCONFIG_KEYBOARD_QT1070=yCONFIG_KEYBOARD_QT2160=y
# CONFIG_KEYBOARD_CLPS711X is not set
# CONFIG_KEYBOARD_DLINK_DIR685 is not setCONFIG_KEYBOARD_LKKBD=y
# CONFIG_KEYBOARD_EP93XX is not setCONFIG_KEYBOARD_GPIO=yCONFIG_KEYBOARD_GPIO_POLLED=yCONFIG_KEYBOARD_TCA6416=yCONFIG_KEYBOARD_TCA8418=yCONFIG_KEYBOARD_MATRIX=yCONFIG_KEYBOARD_LM8323=yCONFIG_KEYBOARD_LM8333=y
# CONFIG_KEYBOARD_MAX7359 is not setCONFIG_KEYBOARD_MCS=yCONFIG_KEYBOARD_MPR121=y
# CONFIG_KEYBOARD_SNVS_PWRKEY is not set
# CONFIG_KEYBOARD_IMX is not setCONFIG_KEYBOARD_NEWTON=y
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_PINEPHONE is not set
# CONFIG_KEYBOARD_GOLDFISH_EVENTS is not setCONFIG_KEYBOARD_STOWAWAY=y
# CONFIG_KEYBOARD_ST_KEYSCAN is not setCONFIG_KEYBOARD_SUNKBD=y
# CONFIG_KEYBOARD_SH_KEYSC is not setCONFIG_KEYBOARD_IQS62X=yCONFIG_KEYBOARD_OMAP4=yCONFIG_KEYBOARD_TC3589X=yCONFIG_KEYBOARD_TM2_TOUCHKEY=yCONFIG_KEYBOARD_TWL4030=yCONFIG_KEYBOARD_XTKBD=yCONFIG_KEYBOARD_CAP11XX=y
# CONFIG_KEYBOARD_MT6779 is not set
# CONFIG_KEYBOARD_MTK_PMIC is not setCONFIG_KEYBOARD_CYPRESS_SF=yCONFIG_INPUT_MOUSE=yCONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_PS2_ALPS is not set
# CONFIG_MOUSE_PS2_BYD is not setCONFIG_MOUSE_PS2_LOGIPS2PP=yCONFIG_MOUSE_PS2_SYNAPTICS=y
# CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS is not set
# CONFIG_MOUSE_PS2_CYPRESS is not setCONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not setCONFIG_MOUSE_PS2_SENTELIC=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_PS2_FOCALTECH is not setCONFIG_MOUSE_SERIAL=yCONFIG_MOUSE_CYAPA=yCONFIG_MOUSE_ELAN_I2C=y
# CONFIG_MOUSE_ELAN_I2C_I2C is not set
# CONFIG_MOUSE_ELAN_I2C_SMBUS is not set
# CONFIG_MOUSE_VSXXXAA is not setCONFIG_MOUSE_GPIO=yCONFIG_MOUSE_SYNAPTICS_I2C=yCONFIG_INPUT_JOYSTICK=yCONFIG_JOYSTICK_ANALOG=yCONFIG_JOYSTICK_A3D=yCONFIG_JOYSTICK_ADC=yCONFIG_JOYSTICK_ADI=yCONFIG_JOYSTICK_COBRA=yCONFIG_JOYSTICK_GF2K=y
# CONFIG_JOYSTICK_GRIP is not setCONFIG_JOYSTICK_GRIP_MP=yCONFIG_JOYSTICK_GUILLEMOT=yCONFIG_JOYSTICK_INTERACT=yCONFIG_JOYSTICK_SIDEWINDER=yCONFIG_JOYSTICK_TMDC=yCONFIG_JOYSTICK_IFORCE=yCONFIG_JOYSTICK_IFORCE_232=y
# CONFIG_JOYSTICK_WARRIOR is not setCONFIG_JOYSTICK_MAGELLAN=yCONFIG_JOYSTICK_SPACEORB=y
# CONFIG_JOYSTICK_SPACEBALL is not setCONFIG_JOYSTICK_STINGER=yCONFIG_JOYSTICK_TWIDJOY=yCONFIG_JOYSTICK_ZHENHUA=y
# CONFIG_JOYSTICK_DB9 is not set
# CONFIG_JOYSTICK_GAMECON is not setCONFIG_JOYSTICK_TURBOGRAFX=y
# CONFIG_JOYSTICK_AS5011 is not set
# CONFIG_JOYSTICK_JOYDUMP is not set
# CONFIG_JOYSTICK_PSXPAD_SPI is not set
# CONFIG_JOYSTICK_QWIIC is not setCONFIG_JOYSTICK_FSIA6B=yCONFIG_JOYSTICK_SENSEHAT=yCONFIG_INPUT_TABLET=yCONFIG_TABLET_SERIAL_WACOM4=y
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not setCONFIG_RMI4_CORE=y
# CONFIG_RMI4_I2C is not set
# CONFIG_RMI4_SPI is not set
# CONFIG_RMI4_SMB is not set
# CONFIG_RMI4_F03 is not setCONFIG_RMI4_2D_SENSOR=yCONFIG_RMI4_F11=yCONFIG_RMI4_F12=y
# CONFIG_RMI4_F30 is not set
# CONFIG_RMI4_F34 is not set
# CONFIG_RMI4_F3A is not setCONFIG_RMI4_F55=y
#
# Hardware I/O ports
#CONFIG_SERIO=yCONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_PARKBD is not setCONFIG_SERIO_LIBPS2=yCONFIG_SERIO_RAW=yCONFIG_SERIO_ALTERA_PS2=yCONFIG_SERIO_PS2MULT=yCONFIG_SERIO_ARC_PS2=yCONFIG_SERIO_APBPS2=y
# CONFIG_SERIO_OLPC_APSP is not set
# CONFIG_SERIO_SUN4I_PS2 is not setCONFIG_SERIO_GPIO_PS2=y
# CONFIG_USERIO is not setCONFIG_GAMEPORT=yCONFIG_GAMEPORT_NS558=y
# CONFIG_GAMEPORT_L4 is not set
# end of Hardware I/O ports # end of Input device support
#
# Character devices
#CONFIG_TTY=yCONFIG_VT=yCONFIG_CONSOLE_TRANSLATIONS=yCONFIG_VT_CONSOLE=yCONFIG_HW_CONSOLE=yCONFIG_VT_HW_CONSOLE_BINDING=yCONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not setCONFIG_LDISC_AUTOLOAD=y
#
# Serial drivers
#CONFIG_SERIAL_EARLYCON=y CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set CONFIG_SERIAL_8250_16550A_VARIANTS=y
# CONFIG_SERIAL_8250_FINTEK is not set
# CONFIG_SERIAL_8250_CONSOLE is not set CONFIG_SERIAL_8250_PARISC=y
# CONFIG_SERIAL_8250_MEN_MCB is not set CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y
# CONFIG_SERIAL_8250_ASPEED_VUART is not set # CONFIG_SERIAL_8250_SHARE_IRQ is not set # CONFIG_SERIAL_8250_DETECT_IRQ is not set CONFIG_SERIAL_8250_RSA=y CONFIG_SERIAL_8250_DWLIB=y CONFIG_SERIAL_8250_DW=y
# CONFIG_SERIAL_8250_IOC3 is not set CONFIG_SERIAL_8250_RT288X=y
# CONFIG_SERIAL_8250_OMAP is not set
# CONFIG_SERIAL_8250_LPC18XX is not set
# CONFIG_SERIAL_8250_MT6577 is not set
# CONFIG_SERIAL_8250_UNIPHIER is not set
# CONFIG_SERIAL_8250_PXA is not set CONFIG_SERIAL_8250_TEGRA=y
# CONFIG_SERIAL_8250_BCM7271 is not set CONFIG_SERIAL_OF_PLATFORM=y
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_AMBA_PL010 is not set CONFIG_SERIAL_KGDB_NMI=y
# CONFIG_SERIAL_MESON is not set
# CONFIG_SERIAL_CLPS711X is not set
# CONFIG_SERIAL_SAMSUNG is not set
# CONFIG_SERIAL_TEGRA is not set CONFIG_SERIAL_MAX3100=y
# CONFIG_SERIAL_MAX310X is not set
# CONFIG_SERIAL_IMX is not set
# CONFIG_SERIAL_IMX_EARLYCON is not set CONFIG_SERIAL_UARTLITE=y CONFIG_SERIAL_UARTLITE_CONSOLE=y CONFIG_SERIAL_UARTLITE_NR_UARTS=1
# CONFIG_SERIAL_SH_SCI is not set
# CONFIG_SERIAL_HS_LPC32XX is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_CONSOLE_POLL=y
# CONFIG_SERIAL_MSM is not set
# CONFIG_SERIAL_VT8500 is not set
# CONFIG_SERIAL_OMAP is not set CONFIG_SERIAL_SIFIVE=y CONFIG_SERIAL_SIFIVE_CONSOLE=y
# CONFIG_SERIAL_LANTIQ is not set
# CONFIG_SERIAL_SCCNXP is not set CONFIG_SERIAL_SC16IS7XX=y
# CONFIG_SERIAL_SC16IS7XX_I2C is not set
# CONFIG_SERIAL_SC16IS7XX_SPI is not set
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_BCM63XX is not set CONFIG_SERIAL_ALTERA_JTAGUART=y CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE=y
# CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE_BYPASS is not set CONFIG_SERIAL_ALTERA_UART=y CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4 CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200 CONFIG_SERIAL_ALTERA_UART_CONSOLE=y
# CONFIG_SERIAL_MXS_AUART is not set CONFIG_SERIAL_XILINX_PS_UART=y
# CONFIG_SERIAL_XILINX_PS_UART_CONSOLE is not set # CONFIG_SERIAL_MPS2_UART is not set CONFIG_SERIAL_ARC=y
# CONFIG_SERIAL_ARC_CONSOLE is not set CONFIG_SERIAL_ARC_NR_PORTS=1 CONFIG_SERIAL_FSL_LPUART=y CONFIG_SERIAL_FSL_LPUART_CONSOLE=y CONFIG_SERIAL_CONEXANT_DIGICOLOR=y
# CONFIG_SERIAL_CONEXANT_DIGICOLOR_CONSOLE is not set # CONFIG_SERIAL_ST_ASC is not set CONFIG_SERIAL_MEN_Z135=y
# CONFIG_SERIAL_STM32 is not set
# CONFIG_SERIAL_OWL is not set
# CONFIG_SERIAL_RDA is not set
# CONFIG_SERIAL_MILBEAUT_USIO is not set CONFIG_SERIAL_LITEUART=y CONFIG_SERIAL_LITEUART_MAX_PORTS=1 CONFIG_SERIAL_LITEUART_CONSOLE=y
# CONFIG_SERIAL_SUNPLUS is not set
# end of Serial drivers
CONFIG_SERIAL_MCTRL_GPIO=y
# CONFIG_SERIAL_NONSTANDARD is not setCONFIG_N_GSM=yCONFIG_NULL_TTY=yCONFIG_SERIAL_DEV_BUS=y
# CONFIG_SERIAL_DEV_CTRL_TTYPORT is not setCONFIG_TTY_PRINTK=yCONFIG_TTY_PRINTK_LEVEL=6
# CONFIG_PRINTER is not setCONFIG_PPDEV=y
# CONFIG_VIRTIO_CONSOLE is not setCONFIG_IPMI_HANDLER=yCONFIG_IPMI_PLAT_DATA=yCONFIG_IPMI_PANIC_EVENT=yCONFIG_IPMI_PANIC_STRING=y
# CONFIG_IPMI_DEVICE_INTERFACE is not setCONFIG_IPMI_SI=yCONFIG_IPMI_SSIF=yCONFIG_IPMI_IPMB=yCONFIG_IPMI_WATCHDOG=yCONFIG_IPMI_POWEROFF=y
# CONFIG_ASPEED_KCS_IPMI_BMC is not set
# CONFIG_NPCM7XX_KCS_IPMI_BMC is not set
# CONFIG_ASPEED_BT_IPMI_BMC is not setCONFIG_IPMB_DEVICE_INTERFACE=yCONFIG_HW_RANDOM=yCONFIG_HW_RANDOM_TIMERIOMEM=y
# CONFIG_HW_RANDOM_BA431 is not setCONFIG_HW_RANDOM_BCM2835=yCONFIG_HW_RANDOM_IPROC_RNG200=yCONFIG_HW_RANDOM_IXP4XX=yCONFIG_HW_RANDOM_OMAP=yCONFIG_HW_RANDOM_OMAP3_ROM=yCONFIG_HW_RANDOM_VIRTIO=yCONFIG_HW_RANDOM_NOMADIK=yCONFIG_HW_RANDOM_STM32=yCONFIG_HW_RANDOM_MESON=yCONFIG_HW_RANDOM_MTK=yCONFIG_HW_RANDOM_EXYNOS=yCONFIG_HW_RANDOM_NPCM=yCONFIG_HW_RANDOM_KEYSTONE=yCONFIG_HW_RANDOM_CCTRNG=yCONFIG_HW_RANDOM_XIPHERA=yCONFIG_DEVMEM=yCONFIG_TCG_TPM=y
# CONFIG_HW_RANDOM_TPM is not setCONFIG_TCG_TIS_CORE=yCONFIG_TCG_TIS=y
# CONFIG_TCG_TIS_SPI is not setCONFIG_TCG_TIS_I2C=y
# CONFIG_TCG_TIS_SYNQUACER is not setCONFIG_TCG_TIS_I2C_CR50=yCONFIG_TCG_TIS_I2C_ATMEL=yCONFIG_TCG_TIS_I2C_INFINEON=y
# CONFIG_TCG_TIS_I2C_NUVOTON is not setCONFIG_TCG_ATMEL=y
# CONFIG_TCG_VTPM_PROXY is not setCONFIG_TCG_TIS_ST33ZP24=yCONFIG_TCG_TIS_ST33ZP24_I2C=yCONFIG_TCG_TIS_ST33ZP24_SPI=yCONFIG_XILLYBUS_CLASS=yCONFIG_XILLYBUS=yCONFIG_XILLYBUS_OF=y
# CONFIG_RANDOM_TRUST_CPU is not setCONFIG_RANDOM_TRUST_BOOTLOADER=y
# end of Character devices
#
# I2C support
#CONFIG_I2C=yCONFIG_I2C_BOARDINFO=yCONFIG_I2C_COMPAT=y
# CONFIG_I2C_CHARDEV is not setCONFIG_I2C_MUX=y
#
# Multiplexer I2C Chip support
#CONFIG_I2C_ARB_GPIO_CHALLENGE=y
# CONFIG_I2C_MUX_GPIO is not set
# CONFIG_I2C_MUX_GPMUX is not setCONFIG_I2C_MUX_LTC4306=yCONFIG_I2C_MUX_PCA9541=y
CONFIG_I2C_MUX_PCA954x=y
# CONFIG_I2C_MUX_PINCTRL is not set
# CONFIG_I2C_MUX_REG is not setCONFIG_I2C_DEMUX_PINCTRL=yCONFIG_I2C_MUX_MLXCPLD=y
# end of Multiplexer I2C Chip support
# CONFIG_I2C_HELPER_AUTO is not setCONFIG_I2C_SMBUS=y
#
# I2C Algorithms
#CONFIG_I2C_ALGOBIT=yCONFIG_I2C_ALGOPCF=yCONFIG_I2C_ALGOPCA=y
# end of I2C Algorithms
#
# I2C Hardware Bus support
#
# CONFIG_I2C_HIX5HD2 is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip) #
# CONFIG_I2C_ALTERA is not set
# CONFIG_I2C_ASPEED is not set
# CONFIG_I2C_AT91 is not set
# CONFIG_I2C_AXXIA is not set
# CONFIG_I2C_BCM_IPROC is not set
# CONFIG_I2C_BCM_KONA is not set CONFIG_I2C_BRCMSTB=y
# CONFIG_I2C_CADENCE is not set CONFIG_I2C_CBUS_GPIO=y
# CONFIG_I2C_DAVINCI is not set CONFIG_I2C_DESIGNWARE_CORE=y
# CONFIG_I2C_DESIGNWARE_SLAVE is not set CONFIG_I2C_DESIGNWARE_PLATFORM=y
# CONFIG_I2C_DIGICOLOR is not set
# CONFIG_I2C_EXYNOS5 is not set
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_HIGHLANDER is not set
# CONFIG_I2C_HISI is not set
# CONFIG_I2C_IMG is not set
# CONFIG_I2C_IMX is not set
# CONFIG_I2C_IMX_LPI2C is not set
# CONFIG_I2C_IOP3XX is not set
# CONFIG_I2C_JZ4780 is not set
# CONFIG_I2C_KEMPLD is not set
# CONFIG_I2C_LPC2K is not set
# CONFIG_I2C_MICROCHIP_CORE is not set
# CONFIG_I2C_MT65XX is not set
# CONFIG_I2C_MT7621 is not set
# CONFIG_I2C_MV64XXX is not set
# CONFIG_I2C_MXS is not set
# CONFIG_I2C_NPCM is not setCONFIG_I2C_OCORES=y
# CONFIG_I2C_OMAP is not set
# CONFIG_I2C_OWL is not set
# CONFIG_I2C_APPLE is not set CONFIG_I2C_PCA_PLATFORM=y
# CONFIG_I2C_PNX is not set
# CONFIG_I2C_PXA is not set
# CONFIG_I2C_QCOM_CCI is not set
# CONFIG_I2C_QUP is not set
# CONFIG_I2C_RIIC is not set
# CONFIG_I2C_RZV2M is not set
# CONFIG_I2C_S3C2410 is not set
# CONFIG_I2C_SH_MOBILE is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_ST is not set
# CONFIG_I2C_STM32F4 is not set
# CONFIG_I2C_STM32F7 is not set
# CONFIG_I2C_SYNQUACER is not set
# CONFIG_I2C_TEGRA_BPMP is not set
# CONFIG_I2C_UNIPHIER is not set
# CONFIG_I2C_UNIPHIER_F is not set
# CONFIG_I2C_VERSATILE is not set
# CONFIG_I2C_WMT is not setCONFIG_I2C_XILINX=y
# CONFIG_I2C_XLP9XX is not set
# CONFIG_I2C_RCAR is not set
#
# External I2C/SMBus adapter drivers
#CONFIG_I2C_PARPORT=yCONFIG_I2C_TAOS_EVM=y
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_MLXCPLD is not setCONFIG_I2C_FSI=yCONFIG_I2C_VIRTIO=y
# end of I2C Hardware Bus support
CONFIG_I2C_SLAVE=y
# CONFIG_I2C_SLAVE_EEPROM is not setCONFIG_I2C_SLAVE_TESTUNIT=y
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not setCONFIG_I2C_DEBUG_BUS=y
# end of I2C support
CONFIG_I3C=yCONFIG_MIPI_I3C_HCI=yCONFIG_SPI=y
# CONFIG_SPI_DEBUG is not setCONFIG_SPI_MASTER=yCONFIG_SPI_MEM=y
#
# SPI Master Controller Drivers
#CONFIG_SPI_ALTERA=yCONFIG_SPI_ALTERA_CORE=y
# CONFIG_SPI_AR934X is not set
# CONFIG_SPI_ATH79 is not set
# CONFIG_SPI_ARMADA_3700 is not set
# CONFIG_SPI_ASPEED_SMC is not set
# CONFIG_SPI_ATMEL is not set
# CONFIG_SPI_ATMEL_QUADSPI is not setCONFIG_SPI_AXI_SPI_ENGINE=y
# CONFIG_SPI_BCM2835 is not set
# CONFIG_SPI_BCM2835AUX is not set
# CONFIG_SPI_BCM63XX is not set
# CONFIG_SPI_BCM63XX_HSSPI is not set
# CONFIG_SPI_BCM_QSPI is not setCONFIG_SPI_BITBANG=yCONFIG_SPI_BUTTERFLY=y
# CONFIG_SPI_CADENCE is not set
# CONFIG_SPI_CADENCE_QUADSPI is not setCONFIG_SPI_CADENCE_XSPI=y
# CONFIG_SPI_CLPS711X is not setCONFIG_SPI_DESIGNWARE=yCONFIG_SPI_DW_DMA=y
# CONFIG_SPI_DW_MMIO is not set
# CONFIG_SPI_DW_BT1 is not set
# CONFIG_SPI_EP93XX is not setCONFIG_SPI_FSI=y
# CONFIG_SPI_FSL_LPSPI is not set
# CONFIG_SPI_FSL_QUADSPI is not set
# CONFIG_SPI_GXP is not set
# CONFIG_SPI_HISI_KUNPENG is not set
# CONFIG_SPI_HISI_SFC_V3XX is not setCONFIG_SPI_NXP_FLEXSPI=yCONFIG_SPI_GPIO=y
# CONFIG_SPI_IMG_SPFI is not set
# CONFIG_SPI_IMX is not set
# CONFIG_SPI_INGENIC is not set
# CONFIG_SPI_INTEL_PLATFORM is not set
# CONFIG_SPI_JCORE is not set
# CONFIG_SPI_LM70_LLP is not set
# CONFIG_SPI_LP8841_RTC is not setCONFIG_SPI_FSL_LIB=yCONFIG_SPI_FSL_SPI=y
# CONFIG_SPI_FSL_DSPI is not set
# CONFIG_SPI_MESON_SPIFC is not set
# CONFIG_SPI_MICROCHIP_CORE is not setCONFIG_SPI_MICROCHIP_CORE_QSPI=y
# CONFIG_SPI_MT65XX is not set
# CONFIG_SPI_MT7621 is not set
# CONFIG_SPI_MTK_NOR is not set
# CONFIG_SPI_NPCM_FIU is not set
# CONFIG_SPI_NPCM_PSPI is not set
# CONFIG_SPI_LANTIQ_SSC is not set
# CONFIG_SPI_OC_TINY is not set
# CONFIG_SPI_OMAP24XX is not set
# CONFIG_SPI_TI_QSPI is not set
# CONFIG_SPI_OMAP_100K is not set
# CONFIG_SPI_ORION is not set
# CONFIG_SPI_PIC32 is not set
# CONFIG_SPI_PIC32_SQI is not set
# CONFIG_SPI_PXA2XX is not setCONFIG_SPI_ROCKCHIP=y
# CONFIG_SPI_ROCKCHIP_SFC is not set
# CONFIG_SPI_RSPI is not set
# CONFIG_SPI_QUP is not set
# CONFIG_SPI_S3C64XX is not setCONFIG_SPI_SC18IS602=y
# CONFIG_SPI_SH is not set
# CONFIG_SPI_SH_HSPI is not setCONFIG_SPI_SIFIVE=y
# CONFIG_SPI_SPRD is not set
# CONFIG_SPI_SPRD_ADI is not set
# CONFIG_SPI_STM32 is not set
# CONFIG_SPI_STM32_QSPI is not set
# CONFIG_SPI_ST_SSC4 is not set
# CONFIG_SPI_SUN4I is not set
# CONFIG_SPI_SUNPLUS_SP7021 is not set
# CONFIG_SPI_SYNQUACER is not setCONFIG_SPI_MXIC=y
# CONFIG_SPI_UNIPHIER is not set
# CONFIG_SPI_XCOMM is not set
# CONFIG_SPI_XILINX is not set
# CONFIG_SPI_XLP is not set
# CONFIG_SPI_XTENSA_XTFPGA is not set
# CONFIG_SPI_ZYNQ_QSPI is not set
# CONFIG_SPI_ZYNQMP_GQSPI is not set
# CONFIG_SPI_AMD is not set
#
# SPI Multiplexer support
#CONFIG_SPI_MUX=y
#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not setCONFIG_SPI_TLE62X0=y
# CONFIG_SPI_SLAVE is not setCONFIG_SPI_DYNAMIC=y
# CONFIG_SPMI is not setCONFIG_HSI=yCONFIG_HSI_BOARDINFO=y
#
# HSI controllers
#
#
# HSI clients
#CONFIG_HSI_CHAR=yCONFIG_PPS=yCONFIG_PPS_DEBUG=y
# CONFIG_NTP_PPS is not set
#
# PPS clients support
#
# CONFIG_PPS_CLIENT_KTIMER is not setCONFIG_PPS_CLIENT_LDISC=yCONFIG_PPS_CLIENT_PARPORT=yCONFIG_PPS_CLIENT_GPIO=y
#
# PPS generators support
#
#
# PTP clock support
#CONFIG_PTP_1588_CLOCK_OPTIONAL=y
#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks. #
# end of PTP clock support
CONFIG_PINCTRL=yCONFIG_GENERIC_PINCTRL_GROUPS=yCONFIG_PINMUX=yCONFIG_GENERIC_PINMUX_FUNCTIONS=yCONFIG_PINCONF=yCONFIG_GENERIC_PINCONF=y
# CONFIG_DEBUG_PINCTRL is not set
# CONFIG_PINCTRL_AMD is not setCONFIG_PINCTRL_AS3722=y
# CONFIG_PINCTRL_AT91PIO4 is not setCONFIG_PINCTRL_AXP209=y
# CONFIG_PINCTRL_BM1880 is not setCONFIG_PINCTRL_CY8C95X0=y
# CONFIG_PINCTRL_DA850_PUPD is not set
# CONFIG_PINCTRL_DA9062 is not set
# CONFIG_PINCTRL_EQUILIBRIUM is not set
# CONFIG_PINCTRL_INGENIC is not set
# CONFIG_PINCTRL_LPC18XX is not setCONFIG_PINCTRL_MCP23S08_I2C=yCONFIG_PINCTRL_MCP23S08_SPI=yCONFIG_PINCTRL_MCP23S08=yCONFIG_PINCTRL_MICROCHIP_SGPIO=yCONFIG_PINCTRL_OCELOT=yCONFIG_PINCTRL_PALMAS=y
# CONFIG_PINCTRL_PISTACHIO is not set
# CONFIG_PINCTRL_RK805 is not set
# CONFIG_PINCTRL_ROCKCHIP is not setCONFIG_PINCTRL_SINGLE=yCONFIG_PINCTRL_STMFX=y
# CONFIG_PINCTRL_SX150X is not set
# CONFIG_PINCTRL_OWL is not set
# CONFIG_PINCTRL_ASPEED_G4 is not set
# CONFIG_PINCTRL_ASPEED_G5 is not set
# CONFIG_PINCTRL_ASPEED_G6 is not set
# CONFIG_PINCTRL_BCM281XX is not set
# CONFIG_PINCTRL_BCM2835 is not set
# CONFIG_PINCTRL_BCM4908 is not set
# CONFIG_PINCTRL_BCM6318 is not set
# CONFIG_PINCTRL_BCM6328 is not set
# CONFIG_PINCTRL_BCM6358 is not set
# CONFIG_PINCTRL_BCM6362 is not set
# CONFIG_PINCTRL_BCM6368 is not set
# CONFIG_PINCTRL_BCM63268 is not set
# CONFIG_PINCTRL_IPROC_GPIO is not set
# CONFIG_PINCTRL_CYGNUS_MUX is not set
# CONFIG_PINCTRL_NS is not set
# CONFIG_PINCTRL_NSP_GPIO is not set
# CONFIG_PINCTRL_NS2_MUX is not set
# CONFIG_PINCTRL_NSP_MUX is not set
# CONFIG_PINCTRL_AS370 is not set
# CONFIG_PINCTRL_BERLIN_BG4CT is not setCONFIG_PINCTRL_MADERA=yCONFIG_PINCTRL_CS47L15=yCONFIG_PINCTRL_CS47L35=yCONFIG_PINCTRL_CS47L90=yCONFIG_PINCTRL_CS47L92=y
#
# Intel pinctrl drivers
#
# end of Intel pinctrl drivers
#
# MediaTek pinctrl drivers
#
# CONFIG_EINT_MTK is not set
# CONFIG_PINCTRL_MT2701 is not set
# CONFIG_PINCTRL_MT7623 is not set
# CONFIG_PINCTRL_MT7629 is not set
# CONFIG_PINCTRL_MT8135 is not set
# CONFIG_PINCTRL_MT8127 is not set
# CONFIG_PINCTRL_MT2712 is not set
# CONFIG_PINCTRL_MT6765 is not set
# CONFIG_PINCTRL_MT6779 is not set
# CONFIG_PINCTRL_MT6795 is not set
# CONFIG_PINCTRL_MT6797 is not set
# CONFIG_PINCTRL_MT7622 is not set
# CONFIG_PINCTRL_MT7986 is not set
# CONFIG_PINCTRL_MT8167 is not set
# CONFIG_PINCTRL_MT8173 is not set
# CONFIG_PINCTRL_MT8183 is not set
# CONFIG_PINCTRL_MT8186 is not set
# CONFIG_PINCTRL_MT8188 is not set
# CONFIG_PINCTRL_MT8192 is not set
# CONFIG_PINCTRL_MT8195 is not set
# CONFIG_PINCTRL_MT8365 is not set
# CONFIG_PINCTRL_MT8516 is not set
# CONFIG_PINCTRL_MT6397 is not set
# end of MediaTek pinctrl drivers
CONFIG_PINCTRL_MESON=y
# CONFIG_PINCTRL_WPCM450 is not set
# CONFIG_PINCTRL_NPCM7XX is not set
# CONFIG_PINCTRL_PXA25X is not set
# CONFIG_PINCTRL_PXA27X is not set
# CONFIG_PINCTRL_MSM is not set
# CONFIG_PINCTRL_QCOM_SSBI_PMIC is not set
# CONFIG_PINCTRL_LPASS_LPI is not set
#
# Renesas pinctrl drivers
#
# CONFIG_PINCTRL_RENESAS is not set
# CONFIG_PINCTRL_PFC_EMEV2 is not set
# CONFIG_PINCTRL_PFC_R8A77995 is not set
# CONFIG_PINCTRL_PFC_R8A7794 is not set
# CONFIG_PINCTRL_PFC_R8A77990 is not set
# CONFIG_PINCTRL_PFC_R8A7779 is not set
# CONFIG_PINCTRL_PFC_R8A7790 is not set
# CONFIG_PINCTRL_PFC_R8A77950 is not set
# CONFIG_PINCTRL_PFC_R8A77951 is not set
# CONFIG_PINCTRL_PFC_R8A7778 is not set
# CONFIG_PINCTRL_PFC_R8A7793 is not set
# CONFIG_PINCTRL_PFC_R8A7791 is not set
# CONFIG_PINCTRL_PFC_R8A77965 is not set
# CONFIG_PINCTRL_PFC_R8A77960 is not set
# CONFIG_PINCTRL_PFC_R8A77961 is not set
# CONFIG_PINCTRL_PFC_R8A779F0 is not set
# CONFIG_PINCTRL_PFC_R8A7792 is not set
# CONFIG_PINCTRL_PFC_R8A77980 is not set
# CONFIG_PINCTRL_PFC_R8A77970 is not set
# CONFIG_PINCTRL_PFC_R8A779A0 is not set
# CONFIG_PINCTRL_PFC_R8A779G0 is not set
# CONFIG_PINCTRL_PFC_R8A7740 is not set
# CONFIG_PINCTRL_PFC_R8A73A4 is not set
# CONFIG_PINCTRL_RZA1 is not set
# CONFIG_PINCTRL_RZA2 is not set
# CONFIG_PINCTRL_RZG2L is not set
# CONFIG_PINCTRL_PFC_R8A77470 is not set
# CONFIG_PINCTRL_PFC_R8A7745 is not set
# CONFIG_PINCTRL_PFC_R8A7742 is not set
# CONFIG_PINCTRL_PFC_R8A7743 is not set
# CONFIG_PINCTRL_PFC_R8A7744 is not set
# CONFIG_PINCTRL_PFC_R8A774C0 is not set
# CONFIG_PINCTRL_PFC_R8A774E1 is not set
# CONFIG_PINCTRL_PFC_R8A774A1 is not set
# CONFIG_PINCTRL_PFC_R8A774B1 is not set
# CONFIG_PINCTRL_RZN1 is not set
# CONFIG_PINCTRL_RZV2M is not set
# CONFIG_PINCTRL_PFC_SH7203 is not set
# CONFIG_PINCTRL_PFC_SH7264 is not set
# CONFIG_PINCTRL_PFC_SH7269 is not set
# CONFIG_PINCTRL_PFC_SH7720 is not set
# CONFIG_PINCTRL_PFC_SH7722 is not set
# CONFIG_PINCTRL_PFC_SH7734 is not set
# CONFIG_PINCTRL_PFC_SH7757 is not set
# CONFIG_PINCTRL_PFC_SH7785 is not set
# CONFIG_PINCTRL_PFC_SH7786 is not set
# CONFIG_PINCTRL_PFC_SH73A0 is not set
# CONFIG_PINCTRL_PFC_SH7723 is not set
# CONFIG_PINCTRL_PFC_SH7724 is not set
# CONFIG_PINCTRL_PFC_SHX3 is not set
# end of Renesas pinctrl drivers
# CONFIG_PINCTRL_EXYNOS is not set
# CONFIG_PINCTRL_S3C24XX is not set
# CONFIG_PINCTRL_S3C64XX is not set
# CONFIG_PINCTRL_SPRD_SC9860 is not set
# CONFIG_PINCTRL_STARFIVE_JH7100 is not set
# CONFIG_PINCTRL_STM32F429 is not set
# CONFIG_PINCTRL_STM32F469 is not set
# CONFIG_PINCTRL_STM32F746 is not set
# CONFIG_PINCTRL_STM32F769 is not set
# CONFIG_PINCTRL_STM32H743 is not set
# CONFIG_PINCTRL_STM32MP135 is not set
# CONFIG_PINCTRL_STM32MP157 is not set
# CONFIG_PINCTRL_TI_IODELAY is not setCONFIG_PINCTRL_UNIPHIER=y
# CONFIG_PINCTRL_UNIPHIER_LD4 is not set
# CONFIG_PINCTRL_UNIPHIER_PRO4 is not set
# CONFIG_PINCTRL_UNIPHIER_SLD8 is not set
# CONFIG_PINCTRL_UNIPHIER_PRO5 is not set
# CONFIG_PINCTRL_UNIPHIER_PXS2 is not set
# CONFIG_PINCTRL_UNIPHIER_LD6B is not set
# CONFIG_PINCTRL_UNIPHIER_LD11 is not set
# CONFIG_PINCTRL_UNIPHIER_LD20 is not set
# CONFIG_PINCTRL_UNIPHIER_PXS3 is not set
# CONFIG_PINCTRL_UNIPHIER_NX1 is not set
# CONFIG_PINCTRL_TMPV7700 is not setCONFIG_GPIOLIB=yCONFIG_GPIOLIB_FASTPATH_LIMIT=512CONFIG_OF_GPIO=yCONFIG_GPIOLIB_IRQCHIP=yCONFIG_DEBUG_GPIO=yCONFIG_GPIO_SYSFS=yCONFIG_GPIO_CDEV=y
# CONFIG_GPIO_CDEV_V1 is not setCONFIG_GPIO_GENERIC=yCONFIG_GPIO_MAX730X=y
#
# Memory mapped GPIO drivers
#
# CONFIG_GPIO_74XX_MMIO is not setCONFIG_GPIO_ALTERA=y
# CONFIG_GPIO_ASPEED is not set
# CONFIG_GPIO_ASPEED_SGPIO is not set
# CONFIG_GPIO_ATH79 is not set
# CONFIG_GPIO_RASPBERRYPI_EXP is not set
# CONFIG_GPIO_BCM_KONA is not set
# CONFIG_GPIO_BCM_XGS_IPROC is not set
# CONFIG_GPIO_BRCMSTB is not setCONFIG_GPIO_CADENCE=y
# CONFIG_GPIO_CLPS711X is not setCONFIG_GPIO_DWAPB=y
# CONFIG_GPIO_EIC_SPRD is not set
# CONFIG_GPIO_EM is not set
# CONFIG_GPIO_FTGPIO010 is not setCONFIG_GPIO_GENERIC_PLATFORM=yCONFIG_GPIO_GRGPIO=y
# CONFIG_GPIO_HISI is not set
# CONFIG_GPIO_HLWD is not set
# CONFIG_GPIO_IOP is not setCONFIG_GPIO_LOGICVC=y
# CONFIG_GPIO_LPC18XX is not set
# CONFIG_GPIO_LPC32XX is not setCONFIG_GPIO_MB86S7X=yCONFIG_GPIO_MENZ127=y
# CONFIG_GPIO_MPC8XXX is not set
# CONFIG_GPIO_MT7621 is not set
# CONFIG_GPIO_MXC is not set
# CONFIG_GPIO_MXS is not set
# CONFIG_GPIO_PMIC_EIC_SPRD is not set
# CONFIG_GPIO_PXA is not set
# CONFIG_GPIO_RCAR is not set
# CONFIG_GPIO_RDA is not set
# CONFIG_GPIO_ROCKCHIP is not set
# CONFIG_GPIO_SAMA5D2_PIOBU is not set
# CONFIG_GPIO_SIFIVE is not setCONFIG_GPIO_SIOX=y
# CONFIG_GPIO_SNPS_CREG is not set
# CONFIG_GPIO_SPRD is not set
# CONFIG_GPIO_STP_XWAY is not setCONFIG_GPIO_SYSCON=y
# CONFIG_GPIO_TEGRA is not set
# CONFIG_GPIO_TEGRA186 is not set
# CONFIG_GPIO_TS4800 is not set
# CONFIG_GPIO_UNIPHIER is not set
# CONFIG_GPIO_VISCONTI is not setCONFIG_GPIO_WCD934X=y
# CONFIG_GPIO_XGENE_SB is not setCONFIG_GPIO_XILINX=y
# CONFIG_GPIO_XLP is not setCONFIG_GPIO_AMD_FCH=y
# CONFIG_GPIO_IDT3243X is not set
# end of Memory mapped GPIO drivers
#
# I2C GPIO expanders
#CONFIG_GPIO_ADNP=yCONFIG_GPIO_GW_PLD=yCONFIG_GPIO_MAX7300=yCONFIG_GPIO_MAX732X=y
# CONFIG_GPIO_MAX732X_IRQ is not set
# CONFIG_GPIO_PCA953X is not setCONFIG_GPIO_PCA9570=y
# CONFIG_GPIO_PCF857X is not set
# CONFIG_GPIO_TPIC2810 is not set
# CONFIG_GPIO_TS4900 is not set
# end of I2C GPIO expanders
#
# MFD GPIO expanders
#CONFIG_GPIO_ADP5520=y
# CONFIG_GPIO_ARIZONA is not setCONFIG_GPIO_BD71815=y
# CONFIG_GPIO_BD71828 is not setCONFIG_GPIO_DA9052=y
# CONFIG_GPIO_KEMPLD is not setCONFIG_GPIO_LP873X=y
# CONFIG_GPIO_MADERA is not setCONFIG_GPIO_PALMAS=y
# CONFIG_GPIO_SL28CPLD is not set
# CONFIG_GPIO_TC3589X is not set
# CONFIG_GPIO_TPS65086 is not set
# CONFIG_GPIO_TPS65218 is not set
# CONFIG_GPIO_TPS65912 is not set
# CONFIG_GPIO_TQMX86 is not setCONFIG_GPIO_TWL4030=y
# CONFIG_GPIO_TWL6040 is not setCONFIG_GPIO_WM831X=yCONFIG_GPIO_WM8350=yCONFIG_GPIO_WM8994=y
# end of MFD GPIO expanders
#
# SPI GPIO expanders
#CONFIG_GPIO_74X164=y
# CONFIG_GPIO_MAX3191X is not set
# CONFIG_GPIO_MAX7301 is not setCONFIG_GPIO_MC33880=yCONFIG_GPIO_PISOSR=y
# CONFIG_GPIO_XRA1403 is not set
# end of SPI GPIO expanders
#
# Virtual GPIO drivers
#CONFIG_GPIO_AGGREGATOR=yCONFIG_GPIO_MOCKUP=yCONFIG_GPIO_VIRTIO=y
# CONFIG_GPIO_SIM is not set
# end of Virtual GPIO drivers
CONFIG_W1=yCONFIG_W1_CON=y
#
# 1-wire Bus Masters
#CONFIG_W1_MASTER_DS2482=y
# CONFIG_W1_MASTER_MXC is not setCONFIG_W1_MASTER_DS1WM=yCONFIG_W1_MASTER_GPIO=yCONFIG_W1_MASTER_SGI=y
# end of 1-wire Bus Masters
#
# 1-wire Slaves
#
# CONFIG_W1_SLAVE_THERM is not setCONFIG_W1_SLAVE_SMEM=yCONFIG_W1_SLAVE_DS2405=yCONFIG_W1_SLAVE_DS2408=yCONFIG_W1_SLAVE_DS2408_READBACK=yCONFIG_W1_SLAVE_DS2413=yCONFIG_W1_SLAVE_DS2406=y
# CONFIG_W1_SLAVE_DS2423 is not setCONFIG_W1_SLAVE_DS2805=y
# CONFIG_W1_SLAVE_DS2430 is not setCONFIG_W1_SLAVE_DS2431=yCONFIG_W1_SLAVE_DS2433=yCONFIG_W1_SLAVE_DS2433_CRC=y
# CONFIG_W1_SLAVE_DS2438 is not setCONFIG_W1_SLAVE_DS250X=y
# CONFIG_W1_SLAVE_DS2780 is not set
# CONFIG_W1_SLAVE_DS2781 is not set
# CONFIG_W1_SLAVE_DS28E04 is not setCONFIG_W1_SLAVE_DS28E17=y
# end of 1-wire Slaves
CONFIG_POWER_RESET=y
# CONFIG_POWER_RESET_AS3722 is not set
# CONFIG_POWER_RESET_BRCMKONA is not set
# CONFIG_POWER_RESET_BRCMSTB is not set
# CONFIG_POWER_RESET_GEMINI_POWEROFF is not setCONFIG_POWER_RESET_GPIO=y
# CONFIG_POWER_RESET_GPIO_RESTART is not set
# CONFIG_POWER_RESET_OCELOT_RESET is not set
# CONFIG_POWER_RESET_LTC2952 is not setCONFIG_POWER_RESET_REGULATOR=yCONFIG_POWER_RESET_RESTART=y
# CONFIG_POWER_RESET_TPS65086 is not set
# CONFIG_POWER_RESET_KEYSTONE is not set
# CONFIG_POWER_RESET_SYSCON is not setCONFIG_POWER_RESET_SYSCON_POWEROFF=y
# CONFIG_POWER_RESET_RMOBILE is not setCONFIG_REBOOT_MODE=yCONFIG_SYSCON_REBOOT_MODE=y
# CONFIG_POWER_RESET_SC27XX is not setCONFIG_NVMEM_REBOOT_MODE=yCONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not setCONFIG_POWER_SUPPLY_HWMON=yCONFIG_PDA_POWER=yCONFIG_GENERIC_ADC_BATTERY=y
# CONFIG_IP5XXX_POWER is not set
# CONFIG_MAX8925_POWER is not set
# CONFIG_WM831X_BACKUP is not setCONFIG_WM831X_POWER=yCONFIG_WM8350_POWER=yCONFIG_TEST_POWER=yCONFIG_CHARGER_ADP5061=y
# CONFIG_BATTERY_ACT8945A is not setCONFIG_BATTERY_CW2015=yCONFIG_BATTERY_DS2760=y
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_LEGO_EV3 is not setCONFIG_BATTERY_SAMSUNG_SDI=yCONFIG_BATTERY_SBS=yCONFIG_CHARGER_SBS=yCONFIG_MANAGER_SBS=yCONFIG_BATTERY_BQ27XXX=yCONFIG_BATTERY_BQ27XXX_I2C=y
# CONFIG_BATTERY_BQ27XXX_HDQ is not setCONFIG_BATTERY_BQ27XXX_DT_UPDATES_NVM=y
# CONFIG_BATTERY_DA9052 is not setCONFIG_CHARGER_AXP20X=yCONFIG_BATTERY_AXP20X=yCONFIG_AXP20X_POWER=y
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not setCONFIG_BATTERY_MAX1721X=yCONFIG_BATTERY_TWL4030_MADC=yCONFIG_CHARGER_PCF50633=yCONFIG_BATTERY_RX51=y
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_TWL4030 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_LP8788 is not setCONFIG_CHARGER_GPIO=yCONFIG_CHARGER_MANAGER=y
# CONFIG_CHARGER_LT3651 is not setCONFIG_CHARGER_LTC4162L=yCONFIG_CHARGER_DETECTOR_MAX14656=yCONFIG_CHARGER_MAX77976=yCONFIG_CHARGER_MT6360=y
# CONFIG_CHARGER_QCOM_SMBB is not setCONFIG_CHARGER_BQ2415X=y
# CONFIG_CHARGER_BQ24190 is not set
# CONFIG_CHARGER_BQ24257 is not setCONFIG_CHARGER_BQ24735=y
# CONFIG_CHARGER_BQ2515X is not setCONFIG_CHARGER_BQ25890=y
# CONFIG_CHARGER_BQ25980 is not set
# CONFIG_CHARGER_BQ256XX is not set
# CONFIG_CHARGER_RK817 is not set
# CONFIG_CHARGER_SMB347 is not setCONFIG_BATTERY_GAUGE_LTC2941=y
# CONFIG_BATTERY_GOLDFISH is not setCONFIG_BATTERY_RT5033=yCONFIG_CHARGER_RT9455=y
# CONFIG_CHARGER_SC2731 is not set
# CONFIG_FUEL_GAUGE_SC27XX is not setCONFIG_CHARGER_UCS1002=yCONFIG_CHARGER_BD99954=yCONFIG_BATTERY_UG3105=yCONFIG_HWMON=yCONFIG_HWMON_VID=yCONFIG_HWMON_DEBUG_CHIP=y
#
# Native drivers
#CONFIG_SENSORS_AD7314=y CONFIG_SENSORS_AD7414=y CONFIG_SENSORS_AD7418=y CONFIG_SENSORS_ADM1025=y
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set CONFIG_SENSORS_ADM1031=y CONFIG_SENSORS_ADM1177=y CONFIG_SENSORS_ADM9240=y
# CONFIG_SENSORS_ADT7310 is not set
# CONFIG_SENSORS_ADT7410 is not set
# CONFIG_SENSORS_ADT7411 is not set CONFIG_SENSORS_ADT7462=y CONFIG_SENSORS_ADT7470=y CONFIG_SENSORS_ADT7475=y
# CONFIG_SENSORS_AHT10 is not set CONFIG_SENSORS_AS370=y
# CONFIG_SENSORS_ASC7621 is not set CONFIG_SENSORS_AXI_FAN_CONTROL=y
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ASPEED is not set CONFIG_SENSORS_ATXP1=y
# CONFIG_SENSORS_BT1_PVT is not set CONFIG_SENSORS_CORSAIR_CPRO=y CONFIG_SENSORS_CORSAIR_PSU=y
# CONFIG_SENSORS_DRIVETEMP is not set
# CONFIG_SENSORS_DS620 is not set CONFIG_SENSORS_DS1621=y CONFIG_SENSORS_DA9052_ADC=y
# CONFIG_SENSORS_SPARX5 is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set CONFIG_SENSORS_F75375S=y CONFIG_SENSORS_GSC=y
# CONFIG_SENSORS_MC13783_ADC is not set
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_G762 is not set CONFIG_SENSORS_GPIO_FAN=y
# CONFIG_SENSORS_HIH6130 is not set
# CONFIG_SENSORS_IBMAEM is not set
# CONFIG_SENSORS_IBMPEX is not set CONFIG_SENSORS_IIO_HWMON=y CONFIG_SENSORS_IT87=y
# CONFIG_SENSORS_JC42 is not set CONFIG_SENSORS_POWR1220=y
# CONFIG_SENSORS_LAN966X is not set CONFIG_SENSORS_LINEAGE=y CONFIG_SENSORS_LTC2945=y CONFIG_SENSORS_LTC2947=y CONFIG_SENSORS_LTC2947_I2C=y CONFIG_SENSORS_LTC2947_SPI=y CONFIG_SENSORS_LTC2990=y CONFIG_SENSORS_LTC2992=y CONFIG_SENSORS_LTC4151=y CONFIG_SENSORS_LTC4215=y CONFIG_SENSORS_LTC4222=y CONFIG_SENSORS_LTC4245=y
# CONFIG_SENSORS_LTC4260 is not set CONFIG_SENSORS_LTC4261=y
# CONFIG_SENSORS_MAX1111 is not set CONFIG_SENSORS_MAX127=y
# CONFIG_SENSORS_MAX16065 is not set CONFIG_SENSORS_MAX1619=y CONFIG_SENSORS_MAX1668=y CONFIG_SENSORS_MAX197=y CONFIG_SENSORS_MAX31722=y
# CONFIG_SENSORS_MAX31730 is not set CONFIG_SENSORS_MAX31760=y CONFIG_SENSORS_MAX6620=y CONFIG_SENSORS_MAX6621=y CONFIG_SENSORS_MAX6639=y CONFIG_SENSORS_MAX6650=y CONFIG_SENSORS_MAX6697=y CONFIG_SENSORS_MAX31790=y CONFIG_SENSORS_MCP3021=y CONFIG_SENSORS_TC654=y CONFIG_SENSORS_TPS23861=y CONFIG_SENSORS_MR75203=y CONFIG_SENSORS_ADCXX=y
# CONFIG_SENSORS_LM63 is not set CONFIG_SENSORS_LM70=y CONFIG_SENSORS_LM73=y CONFIG_SENSORS_LM75=y CONFIG_SENSORS_LM77=y
# CONFIG_SENSORS_LM78 is not set CONFIG_SENSORS_LM80=y
# CONFIG_SENSORS_LM83 is not set CONFIG_SENSORS_LM85=y
# CONFIG_SENSORS_LM87 is not set CONFIG_SENSORS_LM90=y
# CONFIG_SENSORS_LM92 is not set CONFIG_SENSORS_LM93=y
# CONFIG_SENSORS_LM95234 is not set CONFIG_SENSORS_LM95241=y CONFIG_SENSORS_LM95245=y CONFIG_SENSORS_PC87360=y
# CONFIG_SENSORS_PC87427 is not set CONFIG_SENSORS_NTC_THERMISTOR=y
# CONFIG_SENSORS_NCT6683 is not set CONFIG_SENSORS_NCT6775_CORE=y CONFIG_SENSORS_NCT6775=y CONFIG_SENSORS_NCT6775_I2C=y
# CONFIG_SENSORS_NCT7802 is not set CONFIG_SENSORS_NPCM7XX=y
# CONFIG_SENSORS_NSA320 is not set
# CONFIG_SENSORS_OCC_P8_I2C is not set CONFIG_SENSORS_PCF8591=y CONFIG_SENSORS_PECI_CPUTEMP=y CONFIG_SENSORS_PECI_DIMMTEMP=y CONFIG_SENSORS_PECI=yCONFIG_PMBUS=y
# CONFIG_SENSORS_PMBUS is not set CONFIG_SENSORS_ADM1266=y CONFIG_SENSORS_ADM1275=y CONFIG_SENSORS_BEL_PFE=y CONFIG_SENSORS_BPA_RS600=y CONFIG_SENSORS_DELTA_AHE50DC_FAN=y
# CONFIG_SENSORS_FSP_3Y is not set CONFIG_SENSORS_IBM_CFFPS=y CONFIG_SENSORS_DPS920AB=y
# CONFIG_SENSORS_INSPUR_IPSPS is not set CONFIG_SENSORS_IR35221=y
# CONFIG_SENSORS_IR36021 is not set CONFIG_SENSORS_IR38064=y CONFIG_SENSORS_IR38064_REGULATOR=y CONFIG_SENSORS_IRPS5401=y CONFIG_SENSORS_ISL68137=y CONFIG_SENSORS_LM25066=y
# CONFIG_SENSORS_LM25066_REGULATOR is not set CONFIG_SENSORS_LT7182S=y CONFIG_SENSORS_LTC2978=y
# CONFIG_SENSORS_LTC2978_REGULATOR is not set # CONFIG_SENSORS_LTC3815 is not set CONFIG_SENSORS_MAX15301=y CONFIG_SENSORS_MAX16064=y CONFIG_SENSORS_MAX16601=y CONFIG_SENSORS_MAX20730=y CONFIG_SENSORS_MAX20751=y CONFIG_SENSORS_MAX31785=y CONFIG_SENSORS_MAX34440=y
# CONFIG_SENSORS_MAX8688 is not set CONFIG_SENSORS_MP2888=y CONFIG_SENSORS_MP2975=y CONFIG_SENSORS_MP5023=y
# CONFIG_SENSORS_PIM4328 is not set CONFIG_SENSORS_PLI1209BC=y CONFIG_SENSORS_PLI1209BC_REGULATOR=y CONFIG_SENSORS_PM6764TR=y CONFIG_SENSORS_PXE1610=y CONFIG_SENSORS_Q54SJ108A2=y CONFIG_SENSORS_STPDDC60=y CONFIG_SENSORS_TPS40422=y CONFIG_SENSORS_TPS53679=y CONFIG_SENSORS_TPS546D24=y
# CONFIG_SENSORS_UCD9000 is not set
# CONFIG_SENSORS_UCD9200 is not set CONFIG_SENSORS_XDPE152=y CONFIG_SENSORS_XDPE122=y
# CONFIG_SENSORS_XDPE122_REGULATOR is not set # CONFIG_SENSORS_ZL6100 is not set CONFIG_SENSORS_PWM_FAN=y
# CONFIG_SENSORS_RASPBERRYPI_HWMON is not set # CONFIG_SENSORS_SL28CPLD is not set CONFIG_SENSORS_SBTSI=y
# CONFIG_SENSORS_SBRMI is not set
# CONFIG_SENSORS_SHT15 is not set CONFIG_SENSORS_SHT21=y
# CONFIG_SENSORS_SHT3x is not set
# CONFIG_SENSORS_SHT4x is not set CONFIG_SENSORS_SHTC1=y CONFIG_SENSORS_SY7636A=y
# CONFIG_SENSORS_DME1737 is not set CONFIG_SENSORS_EMC1403=y
# CONFIG_SENSORS_EMC2103 is not set
# CONFIG_SENSORS_EMC2305 is not set
# CONFIG_SENSORS_EMC6W201 is not set CONFIG_SENSORS_SMSC47M1=y CONFIG_SENSORS_SMSC47M192=y CONFIG_SENSORS_SMSC47B397=y
# CONFIG_SENSORS_STTS751 is not set
# CONFIG_SENSORS_SMM665 is not set CONFIG_SENSORS_ADC128D818=y CONFIG_SENSORS_ADS7828=y
# CONFIG_SENSORS_ADS7871 is not set CONFIG_SENSORS_AMC6821=y CONFIG_SENSORS_INA209=y CONFIG_SENSORS_INA2XX=y CONFIG_SENSORS_INA238=y CONFIG_SENSORS_INA3221=y
# CONFIG_SENSORS_TC74 is not set CONFIG_SENSORS_THMC50=y CONFIG_SENSORS_TMP102=y CONFIG_SENSORS_TMP103=y
# CONFIG_SENSORS_TMP108 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set CONFIG_SENSORS_TMP464=y
# CONFIG_SENSORS_TMP513 is not set CONFIG_SENSORS_VT1211=y CONFIG_SENSORS_W83773G=y CONFIG_SENSORS_W83781D=y
# CONFIG_SENSORS_W83791D is not set CONFIG_SENSORS_W83792D=y
# CONFIG_SENSORS_W83793 is not set CONFIG_SENSORS_W83795=y CONFIG_SENSORS_W83795_FANCTRL=y CONFIG_SENSORS_W83L785TS=y CONFIG_SENSORS_W83L786NG=y CONFIG_SENSORS_W83627HF=y
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_WM831X is not set
# CONFIG_SENSORS_WM8350 is not set CONFIG_SENSORS_INTEL_M10_BMC_HWMON=y CONFIG_THERMAL=y
# CONFIG_THERMAL_NETLINK is not set
# CONFIG_THERMAL_STATISTICS is not set CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0 # CONFIG_THERMAL_HWMON is not set
# CONFIG_THERMAL_OF is not set CONFIG_THERMAL_WRITABLE_TRIPS=y
# CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE is not set CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE=y
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set CONFIG_THERMAL_GOV_FAIR_SHARE=y
# CONFIG_THERMAL_GOV_STEP_WISE is not set CONFIG_THERMAL_GOV_BANG_BANG=y
# CONFIG_THERMAL_GOV_USER_SPACE is not set CONFIG_DEVFREQ_THERMAL=y
# CONFIG_THERMAL_EMULATION is not set CONFIG_THERMAL_MMIO=y CONFIG_HISI_THERMAL=y
# CONFIG_IMX_THERMAL is not set
# CONFIG_IMX8MM_THERMAL is not set
# CONFIG_K3_THERMAL is not set
# CONFIG_SPEAR_THERMAL is not set
# CONFIG_RCAR_THERMAL is not set
# CONFIG_RCAR_GEN3_THERMAL is not set
# CONFIG_RZG2L_THERMAL is not set
# CONFIG_KIRKWOOD_THERMAL is not set
# CONFIG_DOVE_THERMAL is not set
# CONFIG_ARMADA_THERMAL is not set CONFIG_DA9062_THERMAL=y
#
# Intel thermal drivers
#
#
# ACPI INT340X thermal drivers
#
# end of ACPI INT340X thermal drivers # end of Intel thermal drivers
#
# Broadcom thermal drivers
#
# CONFIG_BRCMSTB_THERMAL is not set
# CONFIG_BCM_NS_THERMAL is not set
# CONFIG_BCM_SR_THERMAL is not set
# end of Broadcom thermal drivers
#
# Texas Instruments thermal drivers
#
# CONFIG_TI_SOC_THERMAL is not set
# end of Texas Instruments thermal drivers
#
# Samsung thermal drivers
#
# end of Samsung thermal drivers
#
# NVIDIA Tegra thermal drivers
#
# CONFIG_TEGRA_SOCTHERM is not set
# CONFIG_TEGRA_BPMP_THERMAL is not set
# CONFIG_TEGRA30_TSENSOR is not set
# end of NVIDIA Tegra thermal drivers
CONFIG_GENERIC_ADC_THERMAL=y
#
# Qualcomm thermal drivers
#
# end of Qualcomm thermal drivers
# CONFIG_SPRD_THERMAL is not set
# CONFIG_WATCHDOG is not setCONFIG_SSB_POSSIBLE=yCONFIG_SSB=yCONFIG_SSB_SDIOHOST_POSSIBLE=y
# CONFIG_SSB_SDIOHOST is not set
# CONFIG_SSB_DRIVER_GPIO is not setCONFIG_BCMA_POSSIBLE=yCONFIG_BCMA=y
# CONFIG_BCMA_HOST_SOC is not set
# CONFIG_BCMA_DRIVER_MIPS is not setCONFIG_BCMA_DRIVER_GMAC_CMN=y
# CONFIG_BCMA_DRIVER_GPIO is not setCONFIG_BCMA_DEBUG=y
#
# Multifunction device drivers
#CONFIG_MFD_CORE=yCONFIG_MFD_ACT8945A=y
# CONFIG_MFD_SUN4I_GPADC is not setCONFIG_MFD_AS3711=yCONFIG_MFD_AS3722=yCONFIG_PMIC_ADP5520=yCONFIG_MFD_AAT2870_CORE=y
# CONFIG_MFD_AT91_USART is not setCONFIG_MFD_ATMEL_FLEXCOM=yCONFIG_MFD_ATMEL_HLCDC=y
# CONFIG_MFD_BCM590XX is not set
# CONFIG_MFD_BD9571MWV is not setCONFIG_MFD_AXP20X=yCONFIG_MFD_AXP20X_I2C=yCONFIG_MFD_MADERA=y
# CONFIG_MFD_MADERA_I2C is not setCONFIG_MFD_MADERA_SPI=yCONFIG_MFD_CS47L15=yCONFIG_MFD_CS47L35=y
# CONFIG_MFD_CS47L85 is not setCONFIG_MFD_CS47L90=yCONFIG_MFD_CS47L92=y
# CONFIG_MFD_ASIC3 is not set
# CONFIG_PMIC_DA903X is not setCONFIG_PMIC_DA9052=yCONFIG_MFD_DA9052_SPI=yCONFIG_MFD_DA9052_I2C=y
# CONFIG_MFD_DA9055 is not setCONFIG_MFD_DA9062=yCONFIG_MFD_DA9063=y
# CONFIG_MFD_DA9150 is not set
# CONFIG_MFD_ENE_KB3930 is not set
# CONFIG_MFD_EXYNOS_LPASS is not setCONFIG_MFD_GATEWORKS_GSC=yCONFIG_MFD_MC13XXX=yCONFIG_MFD_MC13XXX_SPI=y
# CONFIG_MFD_MC13XXX_I2C is not setCONFIG_MFD_MP2629=y
# CONFIG_MFD_MXS_LRADC is not set
# CONFIG_MFD_MX25_TSADC is not setCONFIG_MFD_HI6421_PMIC=y
# CONFIG_MFD_HI655X_PMIC is not setCONFIG_HTC_PASIC3=yCONFIG_HTC_I2CPLD=yCONFIG_MFD_IQS62X=yCONFIG_MFD_KEMPLD=y
# CONFIG_MFD_88PM800 is not setCONFIG_MFD_88PM805=y
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_MAX14577 is not set
# CONFIG_MFD_MAX77620 is not set
# CONFIG_MFD_MAX77650 is not set
# CONFIG_MFD_MAX77686 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX77714 is not setCONFIG_MFD_MAX77843=yCONFIG_MFD_MAX8907=yCONFIG_MFD_MAX8925=y
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not setCONFIG_MFD_MT6360=y
# CONFIG_MFD_MT6370 is not set
# CONFIG_MFD_MT6397 is not set
# CONFIG_MFD_MENF21BMC is not setCONFIG_MFD_OCELOT=y
# CONFIG_EZX_PCAP is not set
# CONFIG_MFD_CPCAP is not setCONFIG_MFD_NTXEC=yCONFIG_MFD_RETU=yCONFIG_MFD_PCF50633=yCONFIG_PCF50633_ADC=yCONFIG_PCF50633_GPIO=y
# CONFIG_MFD_PM8XXX is not setCONFIG_MFD_SY7636A=yCONFIG_MFD_RT4831=yCONFIG_MFD_RT5033=yCONFIG_MFD_RT5120=y
# CONFIG_MFD_RC5T583 is not setCONFIG_MFD_RK808=y
# CONFIG_MFD_RN5T618 is not setCONFIG_MFD_SEC_CORE=yCONFIG_MFD_SI476X_CORE=yCONFIG_MFD_SIMPLE_MFD_I2C=y
# CONFIG_MFD_SL28CPLD is not setCONFIG_MFD_SM501=y
# CONFIG_MFD_SM501_GPIO is not set
# CONFIG_MFD_SKY81452 is not set
# CONFIG_MFD_SC27XX_PMIC is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_STMPE is not set
# CONFIG_MFD_SUN6I_PRCM is not setCONFIG_MFD_SYSCON=y
# CONFIG_MFD_TI_AM335X_TSCADC is not set
# CONFIG_MFD_LP3943 is not setCONFIG_MFD_LP8788=y
# CONFIG_MFD_TI_LMU is not setCONFIG_MFD_PALMAS=y
# CONFIG_TPS6105X is not set
# CONFIG_TPS65010 is not set
# CONFIG_TPS6507X is not setCONFIG_MFD_TPS65086=y
# CONFIG_MFD_TPS65090 is not set
# CONFIG_MFD_TPS65217 is not setCONFIG_MFD_TI_LP873X=y
# CONFIG_MFD_TI_LP87565 is not setCONFIG_MFD_TPS65218=y
# CONFIG_MFD_TPS6586X is not set
# CONFIG_MFD_TPS65910 is not setCONFIG_MFD_TPS65912=yCONFIG_MFD_TPS65912_I2C=yCONFIG_MFD_TPS65912_SPI=yCONFIG_TWL4030_CORE=yCONFIG_MFD_TWL4030_AUDIO=yCONFIG_TWL6040_CORE=y
# CONFIG_MFD_WL1273_CORE is not setCONFIG_MFD_LM3533=yCONFIG_MFD_TC3589X=y
# CONFIG_MFD_TQMX86 is not set
# CONFIG_MFD_LOCHNAGAR is not setCONFIG_MFD_ARIZONA=yCONFIG_MFD_ARIZONA_I2C=y
# CONFIG_MFD_ARIZONA_SPI is not set
# CONFIG_MFD_CS47L24 is not setCONFIG_MFD_WM5102=y
# CONFIG_MFD_WM5110 is not set
# CONFIG_MFD_WM8997 is not setCONFIG_MFD_WM8998=yCONFIG_MFD_WM8400=yCONFIG_MFD_WM831X=y
# CONFIG_MFD_WM831X_I2C is not setCONFIG_MFD_WM831X_SPI=yCONFIG_MFD_WM8350=yCONFIG_MFD_WM8350_I2C=yCONFIG_MFD_WM8994=y
# CONFIG_MFD_STW481X is not setCONFIG_MFD_ROHM_BD718XX=yCONFIG_MFD_ROHM_BD71828=yCONFIG_MFD_ROHM_BD957XMUF=y
# CONFIG_MFD_STM32_LPTIMER is not set
# CONFIG_MFD_STM32_TIMERS is not setCONFIG_MFD_STPMIC1=yCONFIG_MFD_STMFX=yCONFIG_MFD_WCD934X=y
# CONFIG_MFD_ATC260X_I2C is not set
# CONFIG_MFD_KHADAS_MCU is not set
# CONFIG_MFD_ACER_A500_EC is not setCONFIG_MFD_QCOM_PM8008=yCONFIG_RAVE_SP_CORE=yCONFIG_MFD_INTEL_M10_BMC=y
# CONFIG_MFD_RSMU_I2C is not setCONFIG_MFD_RSMU_SPI=y
# end of Multifunction device drivers
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not setCONFIG_REGULATOR_FIXED_VOLTAGE=y
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not setCONFIG_REGULATOR_USERSPACE_CONSUMER=y
# CONFIG_REGULATOR_88PG86X is not setCONFIG_REGULATOR_ACT8865=yCONFIG_REGULATOR_ACT8945A=yCONFIG_REGULATOR_AD5398=y
# CONFIG_REGULATOR_ANATOP is not setCONFIG_REGULATOR_AAT2870=yCONFIG_REGULATOR_AS3711=y
# CONFIG_REGULATOR_AS3722 is not set
# CONFIG_REGULATOR_AXP20X is not setCONFIG_REGULATOR_BD71815=yCONFIG_REGULATOR_BD71828=yCONFIG_REGULATOR_BD718XX=yCONFIG_REGULATOR_BD957XMUF=yCONFIG_REGULATOR_DA9052=yCONFIG_REGULATOR_DA9062=yCONFIG_REGULATOR_DA9063=yCONFIG_REGULATOR_DA9121=yCONFIG_REGULATOR_DA9210=yCONFIG_REGULATOR_DA9211=yCONFIG_REGULATOR_FAN53555=yCONFIG_REGULATOR_FAN53880=yCONFIG_REGULATOR_GPIO=yCONFIG_REGULATOR_HI6421=yCONFIG_REGULATOR_HI6421V530=yCONFIG_REGULATOR_ISL9305=yCONFIG_REGULATOR_ISL6271A=yCONFIG_REGULATOR_LP3971=y
# CONFIG_REGULATOR_LP3972 is not setCONFIG_REGULATOR_LP872X=yCONFIG_REGULATOR_LP873X=y
# CONFIG_REGULATOR_LP8755 is not setCONFIG_REGULATOR_LP8788=yCONFIG_REGULATOR_LTC3589=yCONFIG_REGULATOR_LTC3676=yCONFIG_REGULATOR_MAX1586=y
# CONFIG_REGULATOR_MAX77620 is not set
# CONFIG_REGULATOR_MAX77650 is not set
# CONFIG_REGULATOR_MAX8649 is not setCONFIG_REGULATOR_MAX8660=yCONFIG_REGULATOR_MAX8893=y
# CONFIG_REGULATOR_MAX8907 is not setCONFIG_REGULATOR_MAX8925=y
# CONFIG_REGULATOR_MAX8952 is not setCONFIG_REGULATOR_MAX20086=y
# CONFIG_REGULATOR_MAX77686 is not setCONFIG_REGULATOR_MAX77693=y
# CONFIG_REGULATOR_MAX77802 is not setCONFIG_REGULATOR_MAX77826=y
# CONFIG_REGULATOR_MC13783 is not set
# CONFIG_REGULATOR_MC13892 is not set
# CONFIG_REGULATOR_MCP16502 is not set
# CONFIG_REGULATOR_MP5416 is not setCONFIG_REGULATOR_MP8859=yCONFIG_REGULATOR_MP886X=yCONFIG_REGULATOR_MPQ7920=y
# CONFIG_REGULATOR_MT6311 is not setCONFIG_REGULATOR_MT6360=yCONFIG_REGULATOR_PALMAS=y
# CONFIG_REGULATOR_PBIAS is not setCONFIG_REGULATOR_PCA9450=y
# CONFIG_REGULATOR_PCF50633 is not setCONFIG_REGULATOR_PF8X00=yCONFIG_REGULATOR_PFUZE100=yCONFIG_REGULATOR_PV88060=yCONFIG_REGULATOR_PV88080=yCONFIG_REGULATOR_PV88090=y
# CONFIG_REGULATOR_PWM is not set
# CONFIG_REGULATOR_QCOM_RPMH is not set
# CONFIG_REGULATOR_QCOM_SPMI is not set
# CONFIG_REGULATOR_QCOM_USB_VBUS is not setCONFIG_REGULATOR_RASPBERRYPI_TOUCHSCREEN_ATTINY=yCONFIG_REGULATOR_RK808=yCONFIG_REGULATOR_ROHM=yCONFIG_REGULATOR_RT4801=yCONFIG_REGULATOR_RT4831=yCONFIG_REGULATOR_RT5033=yCONFIG_REGULATOR_RT5120=yCONFIG_REGULATOR_RT5190A=y
# CONFIG_REGULATOR_RT5759 is not setCONFIG_REGULATOR_RT6160=yCONFIG_REGULATOR_RT6245=yCONFIG_REGULATOR_RTQ2134=yCONFIG_REGULATOR_RTMV20=y
# CONFIG_REGULATOR_RTQ6752 is not setCONFIG_REGULATOR_S2MPA01=yCONFIG_REGULATOR_S2MPS11=yCONFIG_REGULATOR_S5M8767=y
# CONFIG_REGULATOR_SC2731 is not setCONFIG_REGULATOR_SLG51000=y
# CONFIG_REGULATOR_STM32_BOOSTER is not set
# CONFIG_REGULATOR_STM32_VREFBUF is not set
# CONFIG_REGULATOR_STM32_PWR is not setCONFIG_REGULATOR_STPMIC1=y
# CONFIG_REGULATOR_TI_ABB is not set
# CONFIG_REGULATOR_STW481X_VMMC is not setCONFIG_REGULATOR_SY7636A=yCONFIG_REGULATOR_SY8106A=yCONFIG_REGULATOR_SY8824X=y
# CONFIG_REGULATOR_SY8827N is not setCONFIG_REGULATOR_TPS51632=yCONFIG_REGULATOR_TPS62360=yCONFIG_REGULATOR_TPS6286X=yCONFIG_REGULATOR_TPS65023=y
# CONFIG_REGULATOR_TPS6507X is not setCONFIG_REGULATOR_TPS65086=yCONFIG_REGULATOR_TPS65132=yCONFIG_REGULATOR_TPS65218=yCONFIG_REGULATOR_TPS6524X=yCONFIG_REGULATOR_TPS65912=y
# CONFIG_REGULATOR_TPS68470 is not setCONFIG_REGULATOR_TWL4030=y
# CONFIG_REGULATOR_UNIPHIER is not setCONFIG_REGULATOR_VCTRL=y
# CONFIG_REGULATOR_WM831X is not setCONFIG_REGULATOR_WM8350=yCONFIG_REGULATOR_WM8400=yCONFIG_REGULATOR_WM8994=y
# CONFIG_REGULATOR_QCOM_LABIBB is not setCONFIG_RC_CORE=y
# CONFIG_LIRC is not set
# CONFIG_RC_MAP is not set
# CONFIG_RC_DECODERS is not set
# CONFIG_RC_DEVICES is not setCONFIG_CEC_CORE=y
#
# CEC support
#
# CONFIG_MEDIA_CEC_RC is not setCONFIG_MEDIA_CEC_SUPPORT=yCONFIG_CEC_CH7322=y
# CONFIG_CEC_MESON_AO is not set
# CONFIG_CEC_GPIO is not set
# CONFIG_CEC_SAMSUNG_S5P is not set
# CONFIG_CEC_STI is not set
# CONFIG_CEC_STM32 is not set
# CONFIG_CEC_TEGRA is not set
# end of CEC support
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
# CONFIG_IMX_IPUV3_CORE is not set
# CONFIG_DRM is not setCONFIG_DRM_DEBUG_MODESET_LOCK=y
#
# ARM devices
#
# end of ARM devices
#
# Frame buffer Devices
#
# CONFIG_FB is not set
# CONFIG_MMP_DISP is not set
# end of Frame buffer Devices
#
# Backlight & LCD device support
#CONFIG_LCD_CLASS_DEVICE=yCONFIG_LCD_L4F00242T03=y
# CONFIG_LCD_LMS283GF05 is not setCONFIG_LCD_LTV350QV=yCONFIG_LCD_ILI922X=yCONFIG_LCD_ILI9320=yCONFIG_LCD_TDO24M=yCONFIG_LCD_VGG2432A4=y
# CONFIG_LCD_PLATFORM is not setCONFIG_LCD_AMS369FG06=y
# CONFIG_LCD_LMS501KF03 is not setCONFIG_LCD_HX8357=y
# CONFIG_LCD_OTM3225A is not setCONFIG_BACKLIGHT_CLASS_DEVICE=yCONFIG_BACKLIGHT_KTD253=y
# CONFIG_BACKLIGHT_LM3533 is not set
# CONFIG_BACKLIGHT_OMAP1 is not setCONFIG_BACKLIGHT_PWM=y
# CONFIG_BACKLIGHT_DA9052 is not setCONFIG_BACKLIGHT_MAX8925=yCONFIG_BACKLIGHT_QCOM_WLED=yCONFIG_BACKLIGHT_RT4831=y
# CONFIG_BACKLIGHT_WM831X is not setCONFIG_BACKLIGHT_ADP5520=yCONFIG_BACKLIGHT_ADP8860=yCONFIG_BACKLIGHT_ADP8870=yCONFIG_BACKLIGHT_PCF50633=y
# CONFIG_BACKLIGHT_AAT2870 is not set
# CONFIG_BACKLIGHT_LM3630A is not setCONFIG_BACKLIGHT_LM3639=y
# CONFIG_BACKLIGHT_LP855X is not setCONFIG_BACKLIGHT_LP8788=y
# CONFIG_BACKLIGHT_PANDORA is not set
# CONFIG_BACKLIGHT_AS3711 is not setCONFIG_BACKLIGHT_GPIO=yCONFIG_BACKLIGHT_LV5207LP=yCONFIG_BACKLIGHT_BD6107=y
# CONFIG_BACKLIGHT_ARCXCNN is not set
# CONFIG_BACKLIGHT_RAVE_SP is not setCONFIG_BACKLIGHT_LED=y
# end of Backlight & LCD device support
#
# Console display driver support
#CONFIG_DUMMY_CONSOLE=yCONFIG_DUMMY_CONSOLE_COLUMNS=160CONFIG_DUMMY_CONSOLE_ROWS=64CONFIG_STI_CONSOLE=y
# end of Console display driver support # end of Graphics support
CONFIG_SOUND=y
# CONFIG_SND is not set
#
# HID support
#CONFIG_HID=yCONFIG_HID_BATTERY_STRENGTH=y
# CONFIG_HIDRAW is not setCONFIG_UHID=yCONFIG_HID_GENERIC=y
#
# Special HID drivers
#
# CONFIG_HID_A4TECH is not setCONFIG_HID_ACRUX=yCONFIG_HID_ACRUX_FF=yCONFIG_HID_APPLE=yCONFIG_HID_AUREAL=y
# CONFIG_HID_BELKIN is not setCONFIG_HID_CHERRY=yCONFIG_HID_COUGAR=y
# CONFIG_HID_MACALLY is not set
# CONFIG_HID_CMEDIA is not setCONFIG_HID_CYPRESS=y
# CONFIG_HID_DRAGONRISE is not setCONFIG_HID_EMS_FF=yCONFIG_HID_ELECOM=yCONFIG_HID_EZKEY=yCONFIG_HID_GEMBIRD=yCONFIG_HID_GFRM=yCONFIG_HID_GLORIOUS=yCONFIG_HID_VIVALDI_COMMON=yCONFIG_HID_VIVALDI=y
# CONFIG_HID_KEYTOUCH is not setCONFIG_HID_KYE=y
# CONFIG_HID_WALTOP is not set
# CONFIG_HID_VIEWSONIC is not set
# CONFIG_HID_VRC2 is not set
# CONFIG_HID_XIAOMI is not setCONFIG_HID_GYRATION=yCONFIG_HID_ICADE=y
# CONFIG_HID_ITE is not setCONFIG_HID_JABRA=yCONFIG_HID_TWINHAN=y
# CONFIG_HID_KENSINGTON is not setCONFIG_HID_LCPOWER=yCONFIG_HID_LED=yCONFIG_HID_LENOVO=yCONFIG_HID_MAGICMOUSE=yCONFIG_HID_MALTRON=y
# CONFIG_HID_MAYFLASH is not setCONFIG_HID_REDRAGON=yCONFIG_HID_MICROSOFT=yCONFIG_HID_MONTEREY=y
# CONFIG_HID_MULTITOUCH is not set
# CONFIG_HID_NINTENDO is not set
# CONFIG_HID_NTI is not setCONFIG_HID_ORTEK=yCONFIG_HID_PANTHERLORD=y
# CONFIG_PANTHERLORD_FF is not setCONFIG_HID_PETALYNX=yCONFIG_HID_PICOLCD=y
# CONFIG_HID_PICOLCD_BACKLIGHT is not setCONFIG_HID_PICOLCD_LCD=yCONFIG_HID_PICOLCD_LEDS=y
# CONFIG_HID_PICOLCD_CIR is not setCONFIG_HID_PLANTRONICS=y
# CONFIG_HID_PLAYSTATION is not set
# CONFIG_HID_PXRC is not setCONFIG_HID_RAZER=yCONFIG_HID_PRIMAX=y
# CONFIG_HID_SAITEK is not setCONFIG_HID_SEMITEK=yCONFIG_HID_SPEEDLINK=yCONFIG_HID_STEAM=y
# CONFIG_HID_STEELSERIES is not setCONFIG_HID_SUNPLUS=y
# CONFIG_HID_RMI is not setCONFIG_HID_GREENASIA=y
# CONFIG_GREENASIA_FF is not setCONFIG_HID_SMARTJOYPLUS=yCONFIG_SMARTJOYPLUS_FF=y
# CONFIG_HID_TIVO is not set
# CONFIG_HID_TOPSEED is not set
# CONFIG_HID_TOPRE is not setCONFIG_HID_THINGM=y
# CONFIG_HID_UDRAW_PS3 is not setCONFIG_HID_WIIMOTE=y
# CONFIG_HID_XINMO is not setCONFIG_HID_ZEROPLUS=y
# CONFIG_ZEROPLUS_FF is not setCONFIG_HID_ZYDACRON=yCONFIG_HID_SENSOR_HUB=yCONFIG_HID_SENSOR_CUSTOM_SENSOR=y
# CONFIG_HID_ALPS is not set
# end of Special HID drivers
#
# I2C HID support
#CONFIG_I2C_HID_OF=yCONFIG_I2C_HID_OF_ELAN=yCONFIG_I2C_HID_OF_GOODIX=y
# end of I2C HID support
CONFIG_I2C_HID_CORE=y
# end of HID support
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_SUPPORT is not setCONFIG_MMC=y
# CONFIG_PWRSEQ_EMMC is not set
# CONFIG_PWRSEQ_SIMPLE is not setCONFIG_MMC_BLOCK=yCONFIG_MMC_BLOCK_MINORS=8CONFIG_SDIO_UART=yCONFIG_MMC_TEST=y
#
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_DEBUG is not setCONFIG_MMC_SDHCI=yCONFIG_MMC_SDHCI_PLTFM=y
# CONFIG_MMC_SDHCI_OF_ASPEED is not set
# CONFIG_MMC_SDHCI_OF_ESDHC is not set
# CONFIG_MMC_SDHCI_OF_SPARX5 is not setCONFIG_MMC_SDHCI_CADENCE=y
# CONFIG_MMC_SDHCI_CNS3XXX is not set
# CONFIG_MMC_SDHCI_ESDHC_IMX is not set
# CONFIG_MMC_SDHCI_DOVE is not set
# CONFIG_MMC_SDHCI_TEGRA is not set
# CONFIG_MMC_SDHCI_S3C is not set
# CONFIG_MMC_SDHCI_SPEAR is not set
# CONFIG_MMC_SDHCI_BCM_KONA is not setCONFIG_MMC_SDHCI_F_SDH30=y
# CONFIG_MMC_SDHCI_MILBEAUT is not set
# CONFIG_MMC_SDHCI_IPROC is not set
# CONFIG_MMC_MOXART is not set
# CONFIG_MMC_SDHCI_ST is not set
# CONFIG_MMC_OMAP_HS is not set
# CONFIG_MMC_SDHCI_MSM is not set
# CONFIG_MMC_DAVINCI is not setCONFIG_MMC_SPI=y
# CONFIG_MMC_S3C is not set
# CONFIG_MMC_SDHCI_SPRD is not set
# CONFIG_MMC_TMIO is not set
# CONFIG_MMC_SDHI is not set
# CONFIG_MMC_UNIPHIER is not set
# CONFIG_MMC_DW is not set
# CONFIG_MMC_SH_MMCIF is not setCONFIG_MMC_USDHI6ROL0=y
# CONFIG_MMC_CQHCI is not setCONFIG_MMC_HSQ=y
# CONFIG_MMC_BCM2835 is not setCONFIG_MMC_SDHCI_XENON=yCONFIG_MMC_SDHCI_OMAP=y
# CONFIG_MMC_SDHCI_AM654 is not set
# CONFIG_MMC_OWL is not set
# CONFIG_MMC_LITEX is not setCONFIG_SCSI_UFSHCD=yCONFIG_SCSI_UFS_BSG=y
# CONFIG_SCSI_UFS_HPB is not set
# CONFIG_SCSI_UFS_HWMON is not set
# CONFIG_SCSI_UFSHCD_PLATFORM is not set
# CONFIG_SCSI_UFS_TI_J721E is not setCONFIG_MEMSTICK=y
# CONFIG_MEMSTICK_DEBUG is not set
#
# MemoryStick drivers
#CONFIG_MEMSTICK_UNSAFE_RESUME=y
# CONFIG_MSPRO_BLOCK is not set
# CONFIG_MS_BLOCK is not set
#
# MemoryStick Host Controller Drivers
#CONFIG_NEW_LEDS=yCONFIG_LEDS_CLASS=y
# CONFIG_LEDS_CLASS_FLASH is not setCONFIG_LEDS_CLASS_MULTICOLOR=y
# CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set
#
# LED drivers
#
# CONFIG_LEDS_AN30259A is not set
# CONFIG_LEDS_ARIEL is not set
# CONFIG_LEDS_AW2013 is not setCONFIG_LEDS_BCM6328=y
# CONFIG_LEDS_BCM6358 is not setCONFIG_LEDS_CR0014114=yCONFIG_LEDS_EL15203000=y
# CONFIG_LEDS_TURRIS_OMNIA is not set
# CONFIG_LEDS_LM3530 is not set
# CONFIG_LEDS_LM3532 is not setCONFIG_LEDS_LM3533=y
# CONFIG_LEDS_LM3642 is not setCONFIG_LEDS_LM3692X=y
# CONFIG_LEDS_S3C24XX is not set
# CONFIG_LEDS_COBALT_QUBE is not set
# CONFIG_LEDS_COBALT_RAQ is not set
# CONFIG_LEDS_PCA9532 is not setCONFIG_LEDS_GPIO=yCONFIG_LEDS_LP3944=yCONFIG_LEDS_LP3952=yCONFIG_LEDS_LP50XX=yCONFIG_LEDS_LP55XX_COMMON=y
# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_LP5523 is not setCONFIG_LEDS_LP5562=y
# CONFIG_LEDS_LP8501 is not set
# CONFIG_LEDS_LP8788 is not set
# CONFIG_LEDS_LP8860 is not setCONFIG_LEDS_PCA955X=y
# CONFIG_LEDS_PCA955X_GPIO is not set
# CONFIG_LEDS_PCA963X is not set
# CONFIG_LEDS_WM831X_STATUS is not set
# CONFIG_LEDS_WM8350 is not setCONFIG_LEDS_DA9052=yCONFIG_LEDS_DAC124S085=yCONFIG_LEDS_PWM=yCONFIG_LEDS_REGULATOR=y
# CONFIG_LEDS_BD2802 is not setCONFIG_LEDS_LT3593=yCONFIG_LEDS_ADP5520=y
# CONFIG_LEDS_MC13783 is not setCONFIG_LEDS_NS2=yCONFIG_LEDS_NETXBIG=y
# CONFIG_LEDS_TCA6507 is not setCONFIG_LEDS_TLC591XX=y
CONFIG_LEDS_LM355x=y
# CONFIG_LEDS_OT200 is not setCONFIG_LEDS_IS31FL319X=yCONFIG_LEDS_IS31FL32XX=y
#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM) #CONFIG_LEDS_BLINKM=y
# CONFIG_LEDS_SYSCON is not setCONFIG_LEDS_MLXREG=yCONFIG_LEDS_USER=yCONFIG_LEDS_SPI_BYTE=y
# CONFIG_LEDS_TI_LMU_COMMON is not set
# CONFIG_LEDS_IP30 is not set
# CONFIG_LEDS_BCM63138 is not set
# CONFIG_LEDS_LGM is not set
#
# Flash and Torch LED drivers
#
#
# RGB LED drivers
#CONFIG_LEDS_PWM_MULTICOLOR=y
#
# LED Triggers
#CONFIG_LEDS_TRIGGERS=y
# CONFIG_LEDS_TRIGGER_TIMER is not setCONFIG_LEDS_TRIGGER_ONESHOT=yCONFIG_LEDS_TRIGGER_DISK=y
# CONFIG_LEDS_TRIGGER_MTD is not setCONFIG_LEDS_TRIGGER_HEARTBEAT=yCONFIG_LEDS_TRIGGER_BACKLIGHT=y
# CONFIG_LEDS_TRIGGER_CPU is not setCONFIG_LEDS_TRIGGER_ACTIVITY=yCONFIG_LEDS_TRIGGER_GPIO=yCONFIG_LEDS_TRIGGER_DEFAULT_ON=y
#
# iptables trigger is under Netfilter config (LED target) # # CONFIG_LEDS_TRIGGER_TRANSIENT is not set CONFIG_LEDS_TRIGGER_CAMERA=y CONFIG_LEDS_TRIGGER_PANIC=y CONFIG_LEDS_TRIGGER_NETDEV=y CONFIG_LEDS_TRIGGER_PATTERN=y # CONFIG_LEDS_TRIGGER_AUDIO is not set # CONFIG_LEDS_TRIGGER_TTY is not set
#
# Simple LED drivers
#CONFIG_ACCESSIBILITY=y
# CONFIG_A11Y_BRAILLE_CONSOLE is not set
#
# Speakup console speech
#CONFIG_SPEAKUP=yCONFIG_SPEAKUP_SERIALIO=y
# CONFIG_SPEAKUP_SYNTH_ACNTSA is not set
# CONFIG_SPEAKUP_SYNTH_ACNTPC is not set
# CONFIG_SPEAKUP_SYNTH_APOLLO is not setCONFIG_SPEAKUP_SYNTH_AUDPTR=yCONFIG_SPEAKUP_SYNTH_BNS=yCONFIG_SPEAKUP_SYNTH_DECTLK=yCONFIG_SPEAKUP_SYNTH_DECEXT=y
# CONFIG_SPEAKUP_SYNTH_DTLK is not set
# CONFIG_SPEAKUP_SYNTH_KEYPC is not setCONFIG_SPEAKUP_SYNTH_LTLK=y
# CONFIG_SPEAKUP_SYNTH_SOFT is not set
# CONFIG_SPEAKUP_SYNTH_SPKOUT is not setCONFIG_SPEAKUP_SYNTH_TXPRT=y
# CONFIG_SPEAKUP_SYNTH_DUMMY is not set
# end of Speakup console speech
CONFIG_RTC_LIB=yCONFIG_RTC_CLASS=yCONFIG_RTC_HCTOSYS=yCONFIG_RTC_HCTOSYS_DEVICE="rtc0"CONFIG_RTC_SYSTOHC=yCONFIG_RTC_SYSTOHC_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not setCONFIG_RTC_LIB_KUNIT_TEST=y
# CONFIG_RTC_NVMEM is not set
#
# RTC interfaces
#CONFIG_RTC_INTF_SYSFS=yCONFIG_RTC_INTF_DEV=yCONFIG_RTC_INTF_DEV_UIE_EMUL=yCONFIG_RTC_DRV_TEST=y
#
# I2C RTC drivers
#CONFIG_RTC_DRV_ABB5ZES3=y
# CONFIG_RTC_DRV_ABEOZ9 is not set
# CONFIG_RTC_DRV_ABX80X is not set
# CONFIG_RTC_DRV_BRCMSTB is not setCONFIG_RTC_DRV_AS3722=yCONFIG_RTC_DRV_DS1307=yCONFIG_RTC_DRV_DS1307_CENTURY=y
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_HYM8563 is not setCONFIG_RTC_DRV_LP8788=yCONFIG_RTC_DRV_MAX6900=y
# CONFIG_RTC_DRV_MAX8907 is not setCONFIG_RTC_DRV_MAX8925=y
# CONFIG_RTC_DRV_MAX77686 is not setCONFIG_RTC_DRV_NCT3018Y=yCONFIG_RTC_DRV_RK808=yCONFIG_RTC_DRV_RS5C372=y
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_ISL12022 is not set
# CONFIG_RTC_DRV_ISL12026 is not setCONFIG_RTC_DRV_X1205=yCONFIG_RTC_DRV_PCF8523=yCONFIG_RTC_DRV_PCF85063=yCONFIG_RTC_DRV_PCF85363=yCONFIG_RTC_DRV_PCF8563=yCONFIG_RTC_DRV_PCF8583=y
# CONFIG_RTC_DRV_M41T80 is not setCONFIG_RTC_DRV_BD70528=yCONFIG_RTC_DRV_BQ32K=yCONFIG_RTC_DRV_TWL4030=yCONFIG_RTC_DRV_PALMAS=y
# CONFIG_RTC_DRV_S35390A is not setCONFIG_RTC_DRV_FM3130=yCONFIG_RTC_DRV_RX8010=yCONFIG_RTC_DRV_RX8581=yCONFIG_RTC_DRV_RX8025=y
# CONFIG_RTC_DRV_EM3027 is not set
# CONFIG_RTC_DRV_RV3028 is not setCONFIG_RTC_DRV_RV3032=yCONFIG_RTC_DRV_RV8803=y
# CONFIG_RTC_DRV_S5M is not setCONFIG_RTC_DRV_SD3078=y
#
# SPI RTC drivers
#CONFIG_RTC_DRV_M41T93=yCONFIG_RTC_DRV_M41T94=y
# CONFIG_RTC_DRV_DS1302 is not set
# CONFIG_RTC_DRV_DS1305 is not set
# CONFIG_RTC_DRV_DS1343 is not setCONFIG_RTC_DRV_DS1347=y
# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6916 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RX4581 is not set
# CONFIG_RTC_DRV_RS5C348 is not setCONFIG_RTC_DRV_MAX6902=yCONFIG_RTC_DRV_PCF2123=y
# CONFIG_RTC_DRV_MCP795 is not setCONFIG_RTC_I2C_AND_SPI=y
#
# SPI and I2C RTC drivers
#
# CONFIG_RTC_DRV_DS3232 is not setCONFIG_RTC_DRV_PCF2127=y
# CONFIG_RTC_DRV_RV3029C2 is not setCONFIG_RTC_DRV_RX6110=y
#
# Platform RTC drivers
#CONFIG_RTC_DRV_DS1286=y
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not setCONFIG_RTC_DRV_DS1685_FAMILY=y
# CONFIG_RTC_DRV_DS1685 is not set
# CONFIG_RTC_DRV_DS1689 is not set
# CONFIG_RTC_DRV_DS17285 is not setCONFIG_RTC_DRV_DS17485=y
# CONFIG_RTC_DRV_DS17885 is not setCONFIG_RTC_DRV_DS1742=y
# CONFIG_RTC_DRV_DS2404 is not setCONFIG_RTC_DRV_DA9052=y
# CONFIG_RTC_DRV_DA9063 is not set
# CONFIG_RTC_DRV_STK17TA8 is not setCONFIG_RTC_DRV_M48T86=yCONFIG_RTC_DRV_M48T35=y
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not setCONFIG_RTC_DRV_BQ4802=y
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
# CONFIG_RTC_DRV_GAMECUBE is not setCONFIG_RTC_DRV_WM831X=yCONFIG_RTC_DRV_WM8350=y
# CONFIG_RTC_DRV_SC27XX is not setCONFIG_RTC_DRV_SPEAR=yCONFIG_RTC_DRV_PCF50633=y
# CONFIG_RTC_DRV_ZYNQMP is not setCONFIG_RTC_DRV_NTXEC=y
#
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_ASM9260 is not set
# CONFIG_RTC_DRV_DAVINCI is not set
# CONFIG_RTC_DRV_DIGICOLOR is not set
# CONFIG_RTC_DRV_FSL_FTM_ALARM is not set
# CONFIG_RTC_DRV_MESON is not set
# CONFIG_RTC_DRV_MESON_VRTC is not set
# CONFIG_RTC_DRV_OMAP is not set
# CONFIG_RTC_DRV_S3C is not set
# CONFIG_RTC_DRV_EP93XX is not set
# CONFIG_RTC_DRV_AT91RM9200 is not set
# CONFIG_RTC_DRV_AT91SAM9 is not set
# CONFIG_RTC_DRV_RZN1 is not setCONFIG_RTC_DRV_GENERIC=y
# CONFIG_RTC_DRV_VT8500 is not set
# CONFIG_RTC_DRV_SUNXI is not set
# CONFIG_RTC_DRV_MV is not set
# CONFIG_RTC_DRV_ARMADA38X is not setCONFIG_RTC_DRV_CADENCE=yCONFIG_RTC_DRV_FTRTC010=y
# CONFIG_RTC_DRV_STMP is not setCONFIG_RTC_DRV_MC13XXX=y
# CONFIG_RTC_DRV_JZ4740 is not set
# CONFIG_RTC_DRV_LPC24XX is not set
# CONFIG_RTC_DRV_LPC32XX is not set
# CONFIG_RTC_DRV_PM8XXX is not set
# CONFIG_RTC_DRV_TEGRA is not set
# CONFIG_RTC_DRV_MXC is not set
# CONFIG_RTC_DRV_MXC_V2 is not set
# CONFIG_RTC_DRV_SNVS is not set
# CONFIG_RTC_DRV_MOXART is not set
# CONFIG_RTC_DRV_MT2712 is not set
# CONFIG_RTC_DRV_MT6397 is not set
# CONFIG_RTC_DRV_MT7622 is not set
# CONFIG_RTC_DRV_XGENE is not setCONFIG_RTC_DRV_R7301=y
# CONFIG_RTC_DRV_STM32 is not set
# CONFIG_RTC_DRV_RTD119X is not set
# CONFIG_RTC_DRV_ASPEED is not set
# CONFIG_RTC_DRV_TI_K3 is not set
#
# HID Sensor RTC drivers
#CONFIG_RTC_DRV_GOLDFISH=y
# CONFIG_RTC_DRV_MSC313 is not set
# CONFIG_DMADEVICES is not set
#
# DMABUF options
#
# CONFIG_SYNC_FILE is not set
# CONFIG_UDMABUF is not setCONFIG_DMABUF_MOVE_NOTIFY=y
# CONFIG_DMABUF_DEBUG is not set
# CONFIG_DMABUF_SELFTESTS is not setCONFIG_DMABUF_HEAPS=y
# CONFIG_DMABUF_SYSFS_STATS is not setCONFIG_DMABUF_HEAPS_SYSTEM=y
# end of DMABUF options
# CONFIG_AUXDISPLAY is not set
# CONFIG_PANEL is not setCONFIG_UIO=yCONFIG_UIO_PDRV_GENIRQ=y
# CONFIG_UIO_DMEM_GENIRQ is not set
# CONFIG_UIO_PRUSS is not setCONFIG_VFIO=yCONFIG_VFIO_NOIOMMU=y
# CONFIG_VFIO_PLATFORM is not set
# CONFIG_VFIO_MDEV is not setCONFIG_VIRT_DRIVERS=yCONFIG_VIRTIO_ANCHOR=yCONFIG_VIRTIO=y
# CONFIG_VIRTIO_MENU is not setCONFIG_VDPA=yCONFIG_VDPA_SIM=yCONFIG_VDPA_SIM_NET=y
# CONFIG_VDPA_SIM_BLOCK is not setCONFIG_VDPA_USER=yCONFIG_VHOST_IOTLB=yCONFIG_VHOST_RING=yCONFIG_VHOST=yCONFIG_VHOST_MENU=yCONFIG_VHOST_NET=y
# CONFIG_VHOST_SCSI is not set
# CONFIG_VHOST_VDPA is not set
# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set
#
# Microsoft Hyper-V guest support
#
# end of Microsoft Hyper-V guest support
CONFIG_GREYBUS=yCONFIG_COMEDI=yCONFIG_COMEDI_DEBUG=yCONFIG_COMEDI_DEFAULT_BUF_SIZE_KB=2048CONFIG_COMEDI_DEFAULT_BUF_MAXSIZE_KB=20480CONFIG_COMEDI_MISC_DRIVERS=yCONFIG_COMEDI_BOND=y
# CONFIG_COMEDI_TEST is not setCONFIG_COMEDI_PARPORT=y
# CONFIG_COMEDI_SSV_DNP is not set
# CONFIG_COMEDI_ISA_DRIVERS is not set
# CONFIG_COMEDI_8255_SA is not setCONFIG_COMEDI_KCOMEDILIB=y
# CONFIG_COMEDI_TESTS is not set
# CONFIG_STAGING is not set
# CONFIG_GOLDFISH is not set
# CONFIG_CHROME_PLATFORMS is not set
# CONFIG_MELLANOX_PLATFORM is not set
# CONFIG_OLPC_XO175 is not setCONFIG_SURFACE_PLATFORMS=y
# CONFIG_COMMON_CLK is not setCONFIG_HWSPINLOCK=y
# CONFIG_HWSPINLOCK_OMAP is not set
# CONFIG_HWSPINLOCK_QCOM is not set
# CONFIG_HWSPINLOCK_SPRD is not set
# CONFIG_HWSPINLOCK_STM32 is not set
# CONFIG_HWSPINLOCK_SUN6I is not set
# CONFIG_HSEM_U8500 is not set
# CONFIG_MAILBOX is not setCONFIG_IOMMU_IOVA=yCONFIG_IOMMU_API=yCONFIG_IOMMU_SUPPORT=y
#
# Generic IOMMU Pagetable Support
#
# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set
# end of Generic IOMMU Pagetable Support
# CONFIG_IOMMU_DEBUGFS is not set
# CONFIG_IOMMU_DEFAULT_DMA_STRICT is not setCONFIG_IOMMU_DEFAULT_DMA_LAZY=y
# CONFIG_IOMMU_DEFAULT_PASSTHROUGH is not setCONFIG_OF_IOMMU=y
# CONFIG_OMAP_IOMMU is not set
# CONFIG_ROCKCHIP_IOMMU is not set
# CONFIG_SUN50I_IOMMU is not set
# CONFIG_S390_CCW_IOMMU is not set
# CONFIG_S390_AP_IOMMU is not set
# CONFIG_MTK_IOMMU is not set
# CONFIG_SPRD_IOMMU is not set
#
# Remoteproc drivers
#
# CONFIG_REMOTEPROC is not set
# end of Remoteproc drivers
#
# Rpmsg drivers
#
# CONFIG_RPMSG_VIRTIO is not set
# end of Rpmsg drivers
CONFIG_SOUNDWIRE=y
#
# SoundWire Devices
#
#
# SOC (System On Chip) specific Drivers
#
#
# Amlogic SoC drivers
#
# CONFIG_MESON_CANVAS is not set
# CONFIG_MESON_CLK_MEASURE is not set
# CONFIG_MESON_GX_SOCINFO is not set
# CONFIG_MESON_MX_SOCINFO is not set
# end of Amlogic SoC drivers
#
# Apple SoC drivers
#
# CONFIG_APPLE_SART is not set
# end of Apple SoC drivers
#
# ASPEED SoC drivers
#
# CONFIG_ASPEED_LPC_CTRL is not set
# CONFIG_ASPEED_LPC_SNOOP is not set
# CONFIG_ASPEED_UART_ROUTING is not set
# CONFIG_ASPEED_P2A_CTRL is not set
# CONFIG_ASPEED_SOCINFO is not set
# end of ASPEED SoC drivers
# CONFIG_AT91_SOC_ID is not set
# CONFIG_AT91_SOC_SFR is not set
#
# Broadcom SoC drivers
#
# CONFIG_BCM2835_POWER is not set
# CONFIG_SOC_BCM63XX is not set
# CONFIG_SOC_BRCMSTB is not set
# CONFIG_BCM_PMB is not set
# end of Broadcom SoC drivers
#
# NXP/Freescale QorIQ SoC drivers
#
# CONFIG_QUICC_ENGINE is not setCONFIG_DPAA2_CONSOLE=y
# end of NXP/Freescale QorIQ SoC drivers
#
# fujitsu SoC drivers # # end of fujitsu SoC drivers
#
# i.MX SoC drivers
#
# CONFIG_SOC_IMX8M is not set
# CONFIG_SOC_IMX9 is not set
# end of i.MX SoC drivers
#
# IXP4xx SoC drivers
#
# CONFIG_IXP4XX_QMGR is not set
# CONFIG_IXP4XX_NPE is not set
# end of IXP4xx SoC drivers
#
# Enable LiteX SoC Builder specific drivers
#CONFIG_LITEX=yCONFIG_LITEX_SOC_CONTROLLER=y
# end of Enable LiteX SoC Builder specific drivers
#
# MediaTek SoC drivers
#
# CONFIG_MTK_CMDQ is not set
# CONFIG_MTK_DEVAPC is not set
# CONFIG_MTK_INFRACFG is not set
# CONFIG_MTK_SCPSYS is not set
# CONFIG_MTK_MMSYS is not set
# end of MediaTek SoC drivers
#
# Qualcomm SoC drivers
#
# CONFIG_QCOM_GENI_SE is not set
# CONFIG_QCOM_GSBI is not set
# CONFIG_QCOM_LLCC is not set
# CONFIG_QCOM_RPMH is not set
# CONFIG_QCOM_SMEM is not set
# CONFIG_QCOM_SPM is not set
# CONFIG_QCOM_ICC_BWMON is not set
# end of Qualcomm SoC drivers
# CONFIG_SOC_RENESAS is not set
# CONFIG_ROCKCHIP_GRF is not set
# CONFIG_ROCKCHIP_IODOMAIN is not set
# CONFIG_SOC_SAMSUNG is not set
# CONFIG_SOC_TEGRA20_VOLTAGE_COUPLER is not set
# CONFIG_SOC_TEGRA30_VOLTAGE_COUPLER is not setCONFIG_SOC_TI=y
# CONFIG_UX500_SOC_ID is not set
#
# Xilinx SoC drivers
#
# end of Xilinx SoC drivers # end of SOC (System On Chip) specific Drivers
CONFIG_PM_DEVFREQ=y
#
# DEVFREQ Governors
#CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=yCONFIG_DEVFREQ_GOV_PERFORMANCE=y
# CONFIG_DEVFREQ_GOV_POWERSAVE is not set
# CONFIG_DEVFREQ_GOV_USERSPACE is not set
# CONFIG_DEVFREQ_GOV_PASSIVE is not set
#
# DEVFREQ Drivers
#
# CONFIG_ARM_EXYNOS_BUS_DEVFREQ is not set
# CONFIG_ARM_IMX_BUS_DEVFREQ is not set
# CONFIG_ARM_MEDIATEK_CCI_DEVFREQ is not set
# CONFIG_PM_DEVFREQ_EVENT is not setCONFIG_EXTCON=y
#
# Extcon Device Drivers
#
# CONFIG_EXTCON_ADC_JACK is not setCONFIG_EXTCON_FSA9480=yCONFIG_EXTCON_GPIO=y
# CONFIG_EXTCON_MAX3355 is not setCONFIG_EXTCON_MAX77843=yCONFIG_EXTCON_PALMAS=yCONFIG_EXTCON_PTN5150=y
# CONFIG_EXTCON_QCOM_SPMI_MISC is not setCONFIG_EXTCON_RT8973A=yCONFIG_EXTCON_SM5502=yCONFIG_EXTCON_USB_GPIO=y
# CONFIG_MEMORY is not setCONFIG_IIO=yCONFIG_IIO_BUFFER=yCONFIG_IIO_BUFFER_CB=yCONFIG_IIO_BUFFER_DMA=yCONFIG_IIO_BUFFER_DMAENGINE=yCONFIG_IIO_BUFFER_HW_CONSUMER=yCONFIG_IIO_KFIFO_BUF=yCONFIG_IIO_TRIGGERED_BUFFER=yCONFIG_IIO_CONFIGFS=yCONFIG_IIO_TRIGGER=yCONFIG_IIO_CONSUMERS_PER_TRIGGER=2CONFIG_IIO_SW_DEVICE=y
# CONFIG_IIO_SW_TRIGGER is not setCONFIG_IIO_TRIGGERED_EVENT=y
#
# Accelerometers
#CONFIG_ADIS16201=yCONFIG_ADIS16209=yCONFIG_ADXL313=yCONFIG_ADXL313_I2C=yCONFIG_ADXL313_SPI=yCONFIG_ADXL345=y
# CONFIG_ADXL345_I2C is not setCONFIG_ADXL345_SPI=yCONFIG_ADXL355=y
# CONFIG_ADXL355_I2C is not setCONFIG_ADXL355_SPI=yCONFIG_ADXL367=y
# CONFIG_ADXL367_SPI is not setCONFIG_ADXL367_I2C=yCONFIG_ADXL372=yCONFIG_ADXL372_SPI=yCONFIG_ADXL372_I2C=yCONFIG_BMA180=y
# CONFIG_BMA220 is not setCONFIG_BMA400=yCONFIG_BMA400_I2C=yCONFIG_BMA400_SPI=yCONFIG_BMC150_ACCEL=yCONFIG_BMC150_ACCEL_I2C=yCONFIG_BMC150_ACCEL_SPI=yCONFIG_BMI088_ACCEL=yCONFIG_BMI088_ACCEL_SPI=yCONFIG_DA280=yCONFIG_DA311=y
# CONFIG_DMARD06 is not setCONFIG_DMARD09=y
# CONFIG_DMARD10 is not setCONFIG_FXLS8962AF=yCONFIG_FXLS8962AF_I2C=yCONFIG_FXLS8962AF_SPI=y
# CONFIG_HID_SENSOR_ACCEL_3D is not set
# CONFIG_KXSD9 is not set
# CONFIG_KXCJK1013 is not setCONFIG_MC3230=yCONFIG_MMA7455=yCONFIG_MMA7455_I2C=y
# CONFIG_MMA7455_SPI is not set
# CONFIG_MMA7660 is not setCONFIG_MMA8452=yCONFIG_MMA9551_CORE=yCONFIG_MMA9551=y
# CONFIG_MMA9553 is not set
# CONFIG_MSA311 is not setCONFIG_MXC4005=y
# CONFIG_MXC6255 is not setCONFIG_SCA3000=y
# CONFIG_SCA3300 is not setCONFIG_STK8312=yCONFIG_STK8BA50=y
# end of Accelerometers
#
# Analog to digital converters
#CONFIG_AD_SIGMA_DELTA=yCONFIG_AD7091R5=yCONFIG_AD7124=yCONFIG_AD7192=y
# CONFIG_AD7266 is not setCONFIG_AD7280=y
# CONFIG_AD7291 is not set
# CONFIG_AD7292 is not set
# CONFIG_AD7298 is not set
# CONFIG_AD7476 is not setCONFIG_AD7606=yCONFIG_AD7606_IFACE_PARALLEL=yCONFIG_AD7606_IFACE_SPI=yCONFIG_AD7766=y
# CONFIG_AD7768_1 is not setCONFIG_AD7780=yCONFIG_AD7791=yCONFIG_AD7793=yCONFIG_AD7887=y
# CONFIG_AD7923 is not set
# CONFIG_AD7949 is not setCONFIG_AD799X=yCONFIG_AD9467=yCONFIG_ADI_AXI_ADC=y
# CONFIG_AT91_ADC is not set
# CONFIG_AT91_SAMA5D2_ADC is not setCONFIG_AXP20X_ADC=yCONFIG_AXP288_ADC=y
# CONFIG_BCM_IPROC_ADC is not set
# CONFIG_BERLIN2_ADC is not setCONFIG_ENVELOPE_DETECTOR=y
# CONFIG_EXYNOS_ADC is not setCONFIG_HI8435=y
# CONFIG_HX711 is not set
# CONFIG_INGENIC_ADC is not set
# CONFIG_IMX7D_ADC is not set
# CONFIG_IMX8QXP_ADC is not setCONFIG_LP8788_ADC=y
# CONFIG_LPC18XX_ADC is not set
# CONFIG_LPC32XX_ADC is not set
# CONFIG_LTC2471 is not setCONFIG_LTC2485=yCONFIG_LTC2496=yCONFIG_LTC2497=yCONFIG_MAX1027=yCONFIG_MAX11100=yCONFIG_MAX1118=yCONFIG_MAX11205=yCONFIG_MAX1241=y
# CONFIG_MAX1363 is not setCONFIG_MAX9611=y
# CONFIG_MCP320X is not set
# CONFIG_MCP3422 is not setCONFIG_MCP3911=yCONFIG_MEDIATEK_MT6360_ADC=y
# CONFIG_MEDIATEK_MT6577_AUXADC is not set
# CONFIG_MEN_Z188_ADC is not set
# CONFIG_MP2629_ADC is not setCONFIG_NAU7802=y
# CONFIG_NPCM_ADC is not setCONFIG_PALMAS_GPADC=y
# CONFIG_RCAR_GYRO_ADC is not set
# CONFIG_RICHTEK_RTQ6056 is not set
# CONFIG_RZG2L_ADC is not set
# CONFIG_SC27XX_ADC is not set
# CONFIG_SPEAR_ADC is not setCONFIG_SD_ADC_MODULATOR=y
# CONFIG_STM32_ADC_CORE is not set
# CONFIG_STM32_DFSDM_CORE is not set
# CONFIG_STM32_DFSDM_ADC is not setCONFIG_TI_ADC081C=yCONFIG_TI_ADC0832=yCONFIG_TI_ADC084S021=yCONFIG_TI_ADC12138=yCONFIG_TI_ADC108S102=yCONFIG_TI_ADC128S052=y
# CONFIG_TI_ADC161S626 is not setCONFIG_TI_ADS1015=y
# CONFIG_TI_ADS7950 is not set
# CONFIG_TI_ADS8344 is not setCONFIG_TI_ADS8688=yCONFIG_TI_ADS124S08=yCONFIG_TI_ADS131E08=y
# CONFIG_TI_TLC4541 is not setCONFIG_TI_TSC2046=yCONFIG_TWL4030_MADC=y
# CONFIG_TWL6030_GPADC is not set
# CONFIG_VF610_ADC is not setCONFIG_XILINX_XADC=y
# CONFIG_XILINX_AMS is not set
# end of Analog to digital converters
#
# Analog to digital and digital to analog converters #CONFIG_AD74413R=y
# end of Analog to digital and digital to analog converters
#
# Analog Front Ends
#CONFIG_IIO_RESCALE=y
# end of Analog Front Ends
#
# Amplifiers
#CONFIG_AD8366=y
# CONFIG_ADA4250 is not setCONFIG_HMC425=y
# end of Amplifiers
#
# Capacitance to digital converters
#CONFIG_AD7150=yCONFIG_AD7746=y
# end of Capacitance to digital converters
#
# Chemical Sensors
#CONFIG_ATLAS_PH_SENSOR=yCONFIG_ATLAS_EZO_SENSOR=yCONFIG_BME680=yCONFIG_BME680_I2C=yCONFIG_BME680_SPI=y
# CONFIG_CCS811 is not set
# CONFIG_IAQCORE is not setCONFIG_PMS7003=yCONFIG_SCD30_CORE=yCONFIG_SCD30_I2C=yCONFIG_SCD30_SERIAL=yCONFIG_SCD4X=y
# CONFIG_SENSIRION_SGP30 is not setCONFIG_SENSIRION_SGP40=yCONFIG_SPS30=yCONFIG_SPS30_I2C=yCONFIG_SPS30_SERIAL=y
# CONFIG_SENSEAIR_SUNRISE_CO2 is not setCONFIG_VZ89X=y
# end of Chemical Sensors
#
# Hid Sensor IIO Common
#CONFIG_HID_SENSOR_IIO_COMMON=yCONFIG_HID_SENSOR_IIO_TRIGGER=y
# end of Hid Sensor IIO Common
CONFIG_IIO_MS_SENSORS_I2C=y
#
# IIO SCMI Sensors
#
# end of IIO SCMI Sensors
#
# SSP Sensor Common
#CONFIG_IIO_SSP_SENSORS_COMMONS=yCONFIG_IIO_SSP_SENSORHUB=y
# end of SSP Sensor Common
CONFIG_IIO_ST_SENSORS_I2C=yCONFIG_IIO_ST_SENSORS_SPI=yCONFIG_IIO_ST_SENSORS_CORE=y
#
# Digital to analog converters
#CONFIG_AD3552R=yCONFIG_AD5064=yCONFIG_AD5360=yCONFIG_AD5380=y
# CONFIG_AD5421 is not set
# CONFIG_AD5446 is not setCONFIG_AD5449=yCONFIG_AD5592R_BASE=yCONFIG_AD5592R=y
# CONFIG_AD5593R is not setCONFIG_AD5504=y
# CONFIG_AD5624R_SPI is not setCONFIG_LTC2688=yCONFIG_AD5686=yCONFIG_AD5686_SPI=yCONFIG_AD5696_I2C=y
# CONFIG_AD5755 is not setCONFIG_AD5758=yCONFIG_AD5761=y
# CONFIG_AD5764 is not set
# CONFIG_AD5766 is not setCONFIG_AD5770R=yCONFIG_AD5791=yCONFIG_AD7293=yCONFIG_AD7303=yCONFIG_AD8801=y
# CONFIG_DPOT_DAC is not setCONFIG_DS4424=y
# CONFIG_LPC18XX_DAC is not setCONFIG_LTC1660=yCONFIG_LTC2632=yCONFIG_M62332=yCONFIG_MAX517=y
# CONFIG_MAX5821 is not setCONFIG_MCP4725=yCONFIG_MCP4922=y
# CONFIG_STM32_DAC is not set
# CONFIG_TI_DAC082S085 is not set
# CONFIG_TI_DAC5571 is not setCONFIG_TI_DAC7311=yCONFIG_TI_DAC7612=yCONFIG_VF610_DAC=y
# end of Digital to analog converters
#
# IIO dummy driver
#CONFIG_IIO_DUMMY_EVGEN=yCONFIG_IIO_SIMPLE_DUMMY=yCONFIG_IIO_SIMPLE_DUMMY_EVENTS=y
# CONFIG_IIO_SIMPLE_DUMMY_BUFFER is not set
# end of IIO dummy driver
#
# Filters
#
# end of Filters
#
# Frequency Synthesizers DDS/PLL
#
#
# Clock Generator/Distribution
#CONFIG_AD9523=y
# end of Clock Generator/Distribution
#
# Phase-Locked Loop (PLL) frequency synthesizers
#CONFIG_ADF4350=yCONFIG_ADF4371=y
# CONFIG_ADMV4420 is not set
# end of Phase-Locked Loop (PLL) frequency synthesizers # end of Frequency Synthesizers DDS/PLL
#
# Digital gyroscope sensors
#CONFIG_ADIS16080=y
# CONFIG_ADIS16130 is not setCONFIG_ADIS16136=yCONFIG_ADIS16260=yCONFIG_ADXRS290=y
# CONFIG_ADXRS450 is not setCONFIG_BMG160=yCONFIG_BMG160_I2C=yCONFIG_BMG160_SPI=yCONFIG_FXAS21002C=yCONFIG_FXAS21002C_I2C=yCONFIG_FXAS21002C_SPI=yCONFIG_HID_SENSOR_GYRO_3D=yCONFIG_MPU3050=yCONFIG_MPU3050_I2C=yCONFIG_IIO_ST_GYRO_3AXIS=y
# CONFIG_IIO_ST_GYRO_I2C_3AXIS is not setCONFIG_IIO_ST_GYRO_SPI_3AXIS=yCONFIG_ITG3200=y
# end of Digital gyroscope sensors
#
# Health Sensors
#
#
# Heart Rate Monitors
#CONFIG_AFE4403=yCONFIG_AFE4404=y
# CONFIG_MAX30100 is not setCONFIG_MAX30102=y
# end of Heart Rate Monitors # end of Health Sensors
#
# Humidity sensors
#CONFIG_AM2315=yCONFIG_DHT11=y
# CONFIG_HDC100X is not set
# CONFIG_HDC2010 is not setCONFIG_HID_SENSOR_HUMIDITY=yCONFIG_HTS221=yCONFIG_HTS221_I2C=yCONFIG_HTS221_SPI=y
# CONFIG_HTU21 is not setCONFIG_SI7005=yCONFIG_SI7020=y
# end of Humidity sensors
#
# Inertial measurement units
#
# CONFIG_ADIS16400 is not setCONFIG_ADIS16460=yCONFIG_ADIS16475=yCONFIG_ADIS16480=yCONFIG_BMI160=yCONFIG_BMI160_I2C=yCONFIG_BMI160_SPI=yCONFIG_BOSCH_BNO055=y
# CONFIG_BOSCH_BNO055_SERIAL is not setCONFIG_BOSCH_BNO055_I2C=yCONFIG_FXOS8700=yCONFIG_FXOS8700_I2C=yCONFIG_FXOS8700_SPI=y
# CONFIG_KMX61 is not setCONFIG_INV_ICM42600=yCONFIG_INV_ICM42600_I2C=y
# CONFIG_INV_ICM42600_SPI is not set
# CONFIG_INV_MPU6050_I2C is not set
# CONFIG_INV_MPU6050_SPI is not set
# CONFIG_IIO_ST_LSM6DSX is not set
# end of Inertial measurement units
CONFIG_IIO_ADIS_LIB=yCONFIG_IIO_ADIS_LIB_BUFFER=y
#
# Light sensors
#CONFIG_ADJD_S311=yCONFIG_ADUX1020=yCONFIG_AL3010=yCONFIG_AL3320A=yCONFIG_APDS9300=yCONFIG_APDS9960=yCONFIG_AS73211=yCONFIG_BH1750=yCONFIG_BH1780=yCONFIG_CM32181=yCONFIG_CM3232=yCONFIG_CM3323=yCONFIG_CM3605=yCONFIG_CM36651=yCONFIG_GP2AP002=y
# CONFIG_GP2AP020A00F is not set
# CONFIG_IQS621_ALS is not setCONFIG_SENSORS_ISL29018=yCONFIG_SENSORS_ISL29028=yCONFIG_ISL29125=y
# CONFIG_HID_SENSOR_ALS is not setCONFIG_HID_SENSOR_PROX=y
# CONFIG_JSA1212 is not setCONFIG_RPR0521=y
# CONFIG_SENSORS_LM3533 is not set
# CONFIG_LTR501 is not setCONFIG_LTRF216A=yCONFIG_LV0104CS=y
# CONFIG_MAX44000 is not set
# CONFIG_MAX44009 is not set
# CONFIG_NOA1305 is not setCONFIG_OPT3001=yCONFIG_PA12203001=yCONFIG_SI1133=yCONFIG_SI1145=y
# CONFIG_STK3310 is not setCONFIG_ST_UVIS25=yCONFIG_ST_UVIS25_I2C=yCONFIG_ST_UVIS25_SPI=yCONFIG_TCS3414=yCONFIG_TCS3472=y
# CONFIG_SENSORS_TSL2563 is not setCONFIG_TSL2583=yCONFIG_TSL2591=yCONFIG_TSL2772=yCONFIG_TSL4531=y
# CONFIG_US5182D is not setCONFIG_VCNL4000=y
# CONFIG_VCNL4035 is not setCONFIG_VEML6030=yCONFIG_VEML6070=y
# CONFIG_VL6180 is not setCONFIG_ZOPT2201=y
# end of Light sensors
#
# Magnetometer sensors
#CONFIG_AK8974=y
# CONFIG_AK8975 is not set
# CONFIG_AK09911 is not set
# CONFIG_BMC150_MAGN_I2C is not set
# CONFIG_BMC150_MAGN_SPI is not setCONFIG_MAG3110=yCONFIG_HID_SENSOR_MAGNETOMETER_3D=y
# CONFIG_MMC35240 is not setCONFIG_IIO_ST_MAGN_3AXIS=y
# CONFIG_IIO_ST_MAGN_I2C_3AXIS is not setCONFIG_IIO_ST_MAGN_SPI_3AXIS=yCONFIG_SENSORS_HMC5843=yCONFIG_SENSORS_HMC5843_I2C=yCONFIG_SENSORS_HMC5843_SPI=yCONFIG_SENSORS_RM3100=y
# CONFIG_SENSORS_RM3100_I2C is not setCONFIG_SENSORS_RM3100_SPI=yCONFIG_YAMAHA_YAS530=y
# end of Magnetometer sensors
#
# Multiplexers
#
# CONFIG_IIO_MUX is not set
# end of Multiplexers
#
# Inclinometer sensors
#
# CONFIG_HID_SENSOR_INCLINOMETER_3D is not set
# CONFIG_HID_SENSOR_DEVICE_ROTATION is not set
# end of Inclinometer sensors
CONFIG_IIO_RESCALE_KUNIT_TEST=yCONFIG_IIO_FORMAT_KUNIT_TEST=y
#
# Triggers - standalone
#
# CONFIG_IIO_INTERRUPT_TRIGGER is not set
# CONFIG_IIO_STM32_LPTIMER_TRIGGER is not set
# CONFIG_IIO_STM32_TIMER_TRIGGER is not setCONFIG_IIO_SYSFS_TRIGGER=y
# end of Triggers - standalone
#
# Linear and angular position sensors
#CONFIG_IQS624_POS=y
# CONFIG_HID_SENSOR_CUSTOM_INTEL_HINGE is not set
# end of Linear and angular position sensors
#
# Digital potentiometers
#CONFIG_AD5110=y
# CONFIG_AD5272 is not setCONFIG_DS1803=yCONFIG_MAX5432=yCONFIG_MAX5481=yCONFIG_MAX5487=y
# CONFIG_MCP4018 is not setCONFIG_MCP4131=y
# CONFIG_MCP4531 is not set
# CONFIG_MCP41010 is not setCONFIG_TPL0102=y
# end of Digital potentiometers
#
# Digital potentiostats
#CONFIG_LMP91000=y
# end of Digital potentiostats
#
# Pressure sensors
#CONFIG_ABP060MG=yCONFIG_BMP280=yCONFIG_BMP280_I2C=yCONFIG_BMP280_SPI=y
# CONFIG_DLHL60D is not setCONFIG_DPS310=y
# CONFIG_HID_SENSOR_PRESS is not setCONFIG_HP03=y
# CONFIG_ICP10100 is not set
# CONFIG_MPL115_I2C is not set
# CONFIG_MPL115_SPI is not set
# CONFIG_MPL3115 is not setCONFIG_MS5611=y
# CONFIG_MS5611_I2C is not setCONFIG_MS5611_SPI=yCONFIG_MS5637=yCONFIG_IIO_ST_PRESS=yCONFIG_IIO_ST_PRESS_I2C=yCONFIG_IIO_ST_PRESS_SPI=yCONFIG_T5403=yCONFIG_HP206C=y
# CONFIG_ZPA2326 is not set
# end of Pressure sensors
#
# Lightning sensors
#CONFIG_AS3935=y
# end of Lightning sensors
#
# Proximity and distance sensors
#
# CONFIG_ISL29501 is not setCONFIG_LIDAR_LITE_V2=yCONFIG_MB1232=yCONFIG_PING=yCONFIG_RFD77402=y
# CONFIG_SRF04 is not setCONFIG_SX_COMMON=yCONFIG_SX9310=yCONFIG_SX9324=yCONFIG_SX9360=yCONFIG_SX9500=yCONFIG_SRF08=y
# CONFIG_VCNL3020 is not setCONFIG_VL53L0X_I2C=y
# end of Proximity and distance sensors
#
# Resolver to digital converters
#CONFIG_AD2S90=yCONFIG_AD2S1200=y
# end of Resolver to digital converters
#
# Temperature sensors
#CONFIG_IQS620AT_TEMP=y
# CONFIG_LTC2983 is not setCONFIG_MAXIM_THERMOCOUPLE=yCONFIG_HID_SENSOR_TEMP=yCONFIG_MLX90614=y
# CONFIG_MLX90632 is not setCONFIG_TMP006=yCONFIG_TMP007=yCONFIG_TMP117=yCONFIG_TSYS01=y
# CONFIG_TSYS02D is not set
# CONFIG_MAX31856 is not set
# CONFIG_MAX31865 is not set
# end of Temperature sensors
CONFIG_PWM=yCONFIG_PWM_SYSFS=y
# CONFIG_PWM_DEBUG is not set
# CONFIG_PWM_ATMEL is not setCONFIG_PWM_ATMEL_TCB=y
# CONFIG_PWM_BCM2835 is not set
# CONFIG_PWM_BERLIN is not set
# CONFIG_PWM_BRCMSTB is not set
# CONFIG_PWM_CLK is not set
# CONFIG_PWM_CLPS711X is not set
# CONFIG_PWM_EP93XX is not set
# CONFIG_PWM_FSL_FTM is not set
# CONFIG_PWM_HIBVT is not set
# CONFIG_PWM_IMX1 is not set
# CONFIG_PWM_IMX27 is not set
# CONFIG_PWM_INTEL_LGM is not set
# CONFIG_PWM_IQS620A is not set
# CONFIG_PWM_LPC18XX_SCT is not set
# CONFIG_PWM_LPC32XX is not set
# CONFIG_PWM_LPSS_PLATFORM is not set
# CONFIG_PWM_MTK_DISP is not set
# CONFIG_PWM_MEDIATEK is not set
# CONFIG_PWM_MXS is not set
# CONFIG_PWM_NTXEC is not set
# CONFIG_PWM_OMAP_DMTIMER is not setCONFIG_PWM_PCA9685=y
# CONFIG_PWM_PXA is not set
# CONFIG_PWM_RASPBERRYPI_POE is not set
# CONFIG_PWM_RCAR is not set
# CONFIG_PWM_RENESAS_TPU is not set
# CONFIG_PWM_ROCKCHIP is not set
# CONFIG_PWM_SAMSUNG is not set
# CONFIG_PWM_SL28CPLD is not set
# CONFIG_PWM_SPEAR is not set
# CONFIG_PWM_SPRD is not set
# CONFIG_PWM_STI is not set
# CONFIG_PWM_STM32 is not set
# CONFIG_PWM_STM32_LP is not set
# CONFIG_PWM_SUNPLUS is not set
# CONFIG_PWM_TEGRA is not set
# CONFIG_PWM_TIECAP is not set
# CONFIG_PWM_TIEHRPWM is not setCONFIG_PWM_TWL=y
# CONFIG_PWM_TWL_LED is not set
# CONFIG_PWM_VISCONTI is not set
# CONFIG_PWM_VT8500 is not set
#
# IRQ chip support
#CONFIG_IRQCHIP=y
# CONFIG_AL_FIC is not setCONFIG_MADERA_IRQ=y
# CONFIG_JCORE_AIC is not set
# CONFIG_RENESAS_INTC_IRQPIN is not set
# CONFIG_RENESAS_IRQC is not set
# CONFIG_RENESAS_RZA1_IRQC is not set
# CONFIG_RENESAS_RZG2L_IRQC is not set
# CONFIG_SL28CPLD_INTC is not set
# CONFIG_TS4800_IRQ is not setCONFIG_XILINX_INTC=y
# CONFIG_INGENIC_TCU_IRQ is not set
# CONFIG_IRQ_UNIPHIER_AIDET is not set
# CONFIG_MESON_IRQ_GPIO is not set
# CONFIG_IMX_IRQSTEER is not set
# CONFIG_IMX_INTMUX is not set
# CONFIG_IMX_MU_MSI is not set
# CONFIG_EXYNOS_IRQ_COMBINER is not set
# CONFIG_MST_IRQ is not set
# CONFIG_MCHP_EIC is not set
# CONFIG_SUNPLUS_SP7021_INTC is not set
# end of IRQ chip support
# CONFIG_IPACK_BUS is not set
# CONFIG_RESET_CONTROLLER is not set
#
# PHY Subsystem
#CONFIG_GENERIC_PHY=y CONFIG_GENERIC_PHY_MIPI_DPHY=y
# CONFIG_PHY_LPC18XX_USB_OTG is not set
# CONFIG_PHY_PISTACHIO_USB is not set
# CONFIG_PHY_XGENE is not set CONFIG_PHY_CAN_TRANSCEIVER=y
# CONFIG_PHY_MESON8_HDMI_TX is not set
# CONFIG_PHY_MESON_G12A_MIPI_DPHY_ANALOG is not set # CONFIG_PHY_MESON_G12A_USB2 is not set
# CONFIG_PHY_MESON_G12A_USB3_PCIE is not set # CONFIG_PHY_MESON_AXG_PCIE is not set
# CONFIG_PHY_MESON_AXG_MIPI_PCIE_ANALOG is not set # CONFIG_PHY_MESON_AXG_MIPI_DPHY is not set
#
# PHY drivers for Broadcom platforms
#
# CONFIG_PHY_BCM63XX_USBH is not set
# CONFIG_PHY_CYGNUS_PCIE is not set
# CONFIG_PHY_BCM_SR_USB is not setCONFIG_BCM_KONA_USB2_PHY=y
# CONFIG_PHY_BCM_NS_USB2 is not set
# CONFIG_PHY_NS2_USB_DRD is not set
# CONFIG_PHY_BRCM_SATA is not set
# CONFIG_PHY_BRCM_USB is not set
# CONFIG_PHY_BCM_SR_PCIE is not set
# end of PHY drivers for Broadcom platforms
CONFIG_PHY_CADENCE_DPHY=yCONFIG_PHY_CADENCE_DPHY_RX=yCONFIG_PHY_CADENCE_SALVO=y
# CONFIG_PHY_FSL_IMX8MQ_USB is not set
# CONFIG_PHY_MIXEL_LVDS_PHY is not set
# CONFIG_PHY_MIXEL_MIPI_DPHY is not set
# CONFIG_PHY_FSL_IMX8M_PCIE is not set
# CONFIG_PHY_FSL_LYNX_28G is not set
# CONFIG_PHY_HI6220_USB is not set
# CONFIG_PHY_HI3660_USB is not set
# CONFIG_PHY_HI3670_USB is not set
# CONFIG_PHY_HI3670_PCIE is not set
# CONFIG_PHY_HISTB_COMBPHY is not set
# CONFIG_PHY_HISI_INNO_USB2 is not set
# CONFIG_PHY_LANTIQ_VRX200_PCIE is not set
# CONFIG_PHY_LANTIQ_RCU_USB2 is not set
# CONFIG_ARMADA375_USBCLUSTER_PHY is not set
# CONFIG_PHY_BERLIN_SATA is not setCONFIG_PHY_MVEBU_A3700_UTMI=y
# CONFIG_PHY_MVEBU_A38X_COMPHY is not setCONFIG_PHY_PXA_28NM_HSIC=yCONFIG_PHY_PXA_28NM_USB2=y
# CONFIG_PHY_PXA_USB is not set
# CONFIG_PHY_MMP3_USB is not set
# CONFIG_PHY_MMP3_HSIC is not set
# CONFIG_PHY_MTK_PCIE is not set
# CONFIG_PHY_MTK_TPHY is not set
# CONFIG_PHY_MTK_UFS is not set
# CONFIG_PHY_MTK_XSPHY is not set
# CONFIG_PHY_MTK_DP is not set
# CONFIG_PHY_SPARX5_SERDES is not setCONFIG_PHY_LAN966X_SERDES=yCONFIG_PHY_OCELOT_SERDES=y
# CONFIG_PHY_ATH79_USB is not set
# CONFIG_PHY_QCOM_IPQ4019_USB is not set
# CONFIG_PHY_QCOM_QUSB2 is not set
# CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2 is not set
# CONFIG_PHY_QCOM_USB_HS_28NM is not set
# CONFIG_PHY_QCOM_USB_SS is not set
# CONFIG_PHY_QCOM_IPQ806X_USB is not set
# CONFIG_PHY_MT7621_PCI is not set
# CONFIG_PHY_RALINK_USB is not set
# CONFIG_PHY_RCAR_GEN3_USB3 is not set
# CONFIG_PHY_ROCKCHIP_DPHY_RX0 is not set
# CONFIG_PHY_ROCKCHIP_INNO_CSIDPHY is not set
# CONFIG_PHY_ROCKCHIP_INNO_DSIDPHY is not set
# CONFIG_PHY_ROCKCHIP_PCIE is not set
# CONFIG_PHY_ROCKCHIP_SNPS_PCIE3 is not set
# CONFIG_PHY_ROCKCHIP_TYPEC is not set
# CONFIG_PHY_EXYNOS_DP_VIDEO is not set
# CONFIG_PHY_EXYNOS_MIPI_VIDEO is not set
# CONFIG_PHY_EXYNOS_PCIE is not set
# CONFIG_PHY_SAMSUNG_UFS is not set
# CONFIG_PHY_SAMSUNG_USB2 is not set
# CONFIG_PHY_UNIPHIER_USB2 is not set
# CONFIG_PHY_UNIPHIER_USB3 is not set
# CONFIG_PHY_UNIPHIER_PCIE is not set
# CONFIG_PHY_UNIPHIER_AHCI is not set
# CONFIG_PHY_ST_SPEAR1310_MIPHY is not set
# CONFIG_PHY_ST_SPEAR1340_MIPHY is not set
# CONFIG_PHY_SUNPLUS_USB is not set
# CONFIG_PHY_TEGRA194_P2U is not set
# CONFIG_PHY_DA8XX_USB is not set
# CONFIG_OMAP_CONTROL_PHY is not set
# CONFIG_TI_PIPE3 is not set
# CONFIG_PHY_INTEL_KEEMBAY_EMMC is not set
# CONFIG_PHY_INTEL_KEEMBAY_USB is not set
# CONFIG_PHY_INTEL_LGM_COMBO is not set
# CONFIG_PHY_INTEL_LGM_EMMC is not set
# CONFIG_PHY_INTEL_THUNDERBAY_EMMC is not set
# CONFIG_PHY_XILINX_ZYNQMP is not set
# end of PHY Subsystem
# CONFIG_POWERCAP is not setCONFIG_MCB=y
# CONFIG_MCB_LPC is not set
#
# Performance monitor support
#
# CONFIG_ARM_CCN is not set
# CONFIG_ARM_CMN is not set
# CONFIG_FSL_IMX8_DDR_PMU is not set
# CONFIG_ARM_DMC620_PMU is not set
# CONFIG_ALIBABA_UNCORE_DRW_PMU is not set
# end of Performance monitor support
CONFIG_RAS=y
#
# Android
#CONFIG_ANDROID_BINDER_IPC=y CONFIG_ANDROID_BINDERFS=y CONFIG_ANDROID_BINDER_DEVICES="binder,hwbinder,vndbinder" CONFIG_ANDROID_BINDER_IPC_SELFTEST=y
# end of Android
CONFIG_DAX=yCONFIG_NVMEM=yCONFIG_NVMEM_SYSFS=y
# CONFIG_NVMEM_APPLE_EFUSES is not set
# CONFIG_NVMEM_BCM_OCOTP is not set
# CONFIG_NVMEM_BRCM_NVRAM is not set
# CONFIG_NVMEM_IMX_IIM is not set
# CONFIG_NVMEM_IMX_OCOTP is not set
# CONFIG_NVMEM_JZ4780_EFUSE is not set
# CONFIG_NVMEM_LAN9662_OTPC is not set
# CONFIG_NVMEM_LAYERSCAPE_SFP is not set
# CONFIG_NVMEM_LPC18XX_EEPROM is not set
# CONFIG_NVMEM_LPC18XX_OTP is not set
# CONFIG_NVMEM_MESON_MX_EFUSE is not set
# CONFIG_NVMEM_MICROCHIP_OTPC is not set
# CONFIG_NVMEM_MTK_EFUSE is not set
# CONFIG_NVMEM_MXS_OCOTP is not set
# CONFIG_NVMEM_NINTENDO_OTP is not set
# CONFIG_NVMEM_QCOM_QFPROM is not setCONFIG_NVMEM_RAVE_SP_EEPROM=yCONFIG_NVMEM_RMEM=y
# CONFIG_NVMEM_ROCKCHIP_EFUSE is not set
# CONFIG_NVMEM_ROCKCHIP_OTP is not set
# CONFIG_NVMEM_SC27XX_EFUSE is not set
# CONFIG_NVMEM_SNVS_LPGPR is not set
# CONFIG_NVMEM_SPRD_EFUSE is not set
# CONFIG_NVMEM_STM32_ROMEM is not set
# CONFIG_NVMEM_SUNPLUS_OCOTP is not set
# CONFIG_NVMEM_U_BOOT_ENV is not set
# CONFIG_NVMEM_UNIPHIER_EFUSE is not set
# CONFIG_NVMEM_VF610_OCOTP is not set
#
# HW tracing support
#CONFIG_STM=yCONFIG_STM_PROTO_BASIC=y
# CONFIG_STM_PROTO_SYS_T is not set
# CONFIG_STM_DUMMY is not set
# CONFIG_STM_SOURCE_CONSOLE is not setCONFIG_STM_SOURCE_HEARTBEAT=y
# CONFIG_STM_SOURCE_FTRACE is not setCONFIG_INTEL_TH=y
# CONFIG_INTEL_TH_GTH is not setCONFIG_INTEL_TH_STH=yCONFIG_INTEL_TH_MSU=yCONFIG_INTEL_TH_PTI=yCONFIG_INTEL_TH_DEBUG=y
# end of HW tracing support
# CONFIG_FPGA is not setCONFIG_FSI=yCONFIG_FSI_NEW_DEV_NODE=yCONFIG_FSI_MASTER_GPIO=yCONFIG_FSI_MASTER_HUB=yCONFIG_FSI_MASTER_ASPEED=yCONFIG_FSI_SCOM=yCONFIG_FSI_SBEFIFO=y
# CONFIG_FSI_OCC is not set
# CONFIG_TEE is not setCONFIG_MULTIPLEXER=y
#
# Multiplexer drivers
#CONFIG_MUX_ADG792A=yCONFIG_MUX_ADGS1408=y
# CONFIG_MUX_GPIO is not set
# CONFIG_MUX_MMIO is not set
# end of Multiplexer drivers
CONFIG_PM_OPP=yCONFIG_SIOX=yCONFIG_SIOX_BUS_GPIO=yCONFIG_SLIMBUS=yCONFIG_SLIM_QCOM_CTRL=y
# CONFIG_INTERCONNECT is not setCONFIG_COUNTER=y
# CONFIG_104_QUAD_8 is not setCONFIG_INTERRUPT_CNT=y
# CONFIG_STM32_TIMER_CNT is not set
# CONFIG_STM32_LPTIMER_CNT is not set
# CONFIG_TI_EQEP is not set
# CONFIG_FTM_QUADDEC is not setCONFIG_MICROCHIP_TCB_CAPTURE=y
# CONFIG_TI_ECAP_CAPTURE is not set
# CONFIG_MOST is not setCONFIG_PECI=yCONFIG_PECI_CPU=yCONFIG_HTE=y
# end of Device Drivers
#
# File systems
#CONFIG_VALIDATE_FS_PARSER=yCONFIG_FS_IOMAP=yCONFIG_EXT2_FS=yCONFIG_EXT2_FS_XATTR=y
# CONFIG_EXT2_FS_POSIX_ACL is not set
# CONFIG_EXT2_FS_SECURITY is not set
# CONFIG_EXT3_FS is not setCONFIG_EXT4_FS=yCONFIG_EXT4_FS_POSIX_ACL=y
# CONFIG_EXT4_FS_SECURITY is not setCONFIG_EXT4_DEBUG=yCONFIG_EXT4_KUNIT_TESTS=yCONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not setCONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not setCONFIG_GFS2_FS=yCONFIG_BTRFS_FS=y
# CONFIG_BTRFS_FS_POSIX_ACL is not set
# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not setCONFIG_BTRFS_FS_RUN_SANITY_TESTS=yCONFIG_BTRFS_DEBUG=yCONFIG_BTRFS_ASSERT=y
# CONFIG_BTRFS_FS_REF_VERIFY is not setCONFIG_NILFS2_FS=yCONFIG_F2FS_FS=y
# CONFIG_F2FS_STAT_FS is not setCONFIG_F2FS_FS_XATTR=y
# CONFIG_F2FS_FS_POSIX_ACL is not setCONFIG_F2FS_FS_SECURITY=yCONFIG_F2FS_CHECK_FS=y
# CONFIG_F2FS_FAULT_INJECTION is not setCONFIG_F2FS_FS_COMPRESSION=y
# CONFIG_F2FS_FS_LZO is not setCONFIG_F2FS_FS_LZ4=y
# CONFIG_F2FS_FS_LZ4HC is not set
# CONFIG_F2FS_FS_ZSTD is not setCONFIG_F2FS_IOSTAT=y
# CONFIG_F2FS_UNFAIR_RWSEM is not setCONFIG_ZONEFS_FS=yCONFIG_FS_POSIX_ACL=yCONFIG_EXPORTFS=yCONFIG_EXPORTFS_BLOCK_OPS=y
# CONFIG_FILE_LOCKING is not setCONFIG_FS_ENCRYPTION=yCONFIG_FS_ENCRYPTION_ALGS=y
# CONFIG_FS_VERITY is not setCONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY_USER is not setCONFIG_FANOTIFY=y
# CONFIG_QUOTA is not setCONFIG_QUOTA_NETLINK_INTERFACE=yCONFIG_QUOTACTL=yCONFIG_AUTOFS4_FS=yCONFIG_AUTOFS_FS=yCONFIG_FUSE_FS=yCONFIG_CUSE=yCONFIG_VIRTIO_FS=y
# CONFIG_OVERLAY_FS is not set
#
# Caches
#
# CONFIG_FSCACHE is not set
# end of Caches
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not setCONFIG_UDF_FS=y
# end of CD-ROM/DVD Filesystems
#
# DOS/FAT/EXFAT/NT Filesystems
#CONFIG_FAT_FS=yCONFIG_MSDOS_FS=yCONFIG_VFAT_FS=yCONFIG_FAT_DEFAULT_CODEPAGE=437CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"CONFIG_FAT_DEFAULT_UTF8=yCONFIG_FAT_KUNIT_TEST=yCONFIG_EXFAT_FS=yCONFIG_EXFAT_DEFAULT_IOCHARSET="utf8"CONFIG_NTFS_FS=yCONFIG_NTFS_DEBUG=yCONFIG_NTFS_RW=y
# CONFIG_NTFS3_FS is not set
# end of DOS/FAT/EXFAT/NT Filesystems
#
# Pseudo filesystems
#
# CONFIG_PROC_FS is not setCONFIG_KERNFS=yCONFIG_SYSFS=yCONFIG_CONFIGFS_FS=y
# end of Pseudo filesystems
# CONFIG_MISC_FILESYSTEMS is not setCONFIG_NETWORK_FILESYSTEMS=yCONFIG_NLS=yCONFIG_NLS_DEFAULT="iso8859-1"CONFIG_NLS_CODEPAGE_437=yCONFIG_NLS_CODEPAGE_737=yCONFIG_NLS_CODEPAGE_775=yCONFIG_NLS_CODEPAGE_850=y
# CONFIG_NLS_CODEPAGE_852 is not setCONFIG_NLS_CODEPAGE_855=yCONFIG_NLS_CODEPAGE_857=yCONFIG_NLS_CODEPAGE_860=yCONFIG_NLS_CODEPAGE_861=yCONFIG_NLS_CODEPAGE_862=yCONFIG_NLS_CODEPAGE_863=y
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not setCONFIG_NLS_CODEPAGE_866=yCONFIG_NLS_CODEPAGE_869=y
# CONFIG_NLS_CODEPAGE_936 is not setCONFIG_NLS_CODEPAGE_950=y
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not setCONFIG_NLS_ISO8859_8=yCONFIG_NLS_CODEPAGE_1250=yCONFIG_NLS_CODEPAGE_1251=yCONFIG_NLS_ASCII=yCONFIG_NLS_ISO8859_1=yCONFIG_NLS_ISO8859_2=y
# CONFIG_NLS_ISO8859_3 is not setCONFIG_NLS_ISO8859_4=yCONFIG_NLS_ISO8859_5=yCONFIG_NLS_ISO8859_6=yCONFIG_NLS_ISO8859_7=y
# CONFIG_NLS_ISO8859_9 is not setCONFIG_NLS_ISO8859_13=y
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not setCONFIG_NLS_KOI8_R=y
# CONFIG_NLS_KOI8_U is not setCONFIG_NLS_MAC_ROMAN=yCONFIG_NLS_MAC_CELTIC=yCONFIG_NLS_MAC_CENTEURO=y
# CONFIG_NLS_MAC_CROATIAN is not setCONFIG_NLS_MAC_CYRILLIC=y
# CONFIG_NLS_MAC_GAELIC is not setCONFIG_NLS_MAC_GREEK=yCONFIG_NLS_MAC_ICELAND=y
# CONFIG_NLS_MAC_INUIT is not setCONFIG_NLS_MAC_ROMANIAN=yCONFIG_NLS_MAC_TURKISH=yCONFIG_NLS_UTF8=yCONFIG_UNICODE=yCONFIG_UNICODE_NORMALIZATION_SELFTEST=yCONFIG_IO_WQ=y
# end of File systems
#
# Security options
#CONFIG_KEYS=yCONFIG_KEYS_REQUEST_CACHE=yCONFIG_PERSISTENT_KEYRINGS=y
# CONFIG_TRUSTED_KEYS is not setCONFIG_ENCRYPTED_KEYS=y
# CONFIG_USER_DECRYPTED_DATA is not set CONFIG_KEY_DH_OPERATIONS=y
# CONFIG_KEY_NOTIFICATIONS is not set CONFIG_SECURITY_DMESG_RESTRICT=y
# CONFIG_SECURITYFS is not set
# CONFIG_STATIC_USERMODEHELPER is not set CONFIG_DEFAULT_SECURITY_DAC=y CONFIG_LSM="landlock,lockdown,yama,loadpin,safesetid,integrity,bpf"
#
# Kernel hardening options
#
#
# Memory initialization
#CONFIG_CC_HAS_AUTO_VAR_INIT_PATTERN=yCONFIG_CC_HAS_AUTO_VAR_INIT_ZERO_BARE=yCONFIG_CC_HAS_AUTO_VAR_INIT_ZERO=yCONFIG_INIT_STACK_NONE=y
# CONFIG_INIT_STACK_ALL_PATTERN is not set
# CONFIG_INIT_STACK_ALL_ZERO is not setCONFIG_INIT_ON_ALLOC_DEFAULT_ON=yCONFIG_INIT_ON_FREE_DEFAULT_ON=yCONFIG_CC_HAS_ZERO_CALL_USED_REGS=y
# CONFIG_ZERO_CALL_USED_REGS is not set
# end of Memory initialization
CONFIG_RANDSTRUCT_NONE=y
# end of Kernel hardening options # end of Security options
CONFIG_XOR_BLOCKS=yCONFIG_CRYPTO=y
#
# Crypto core or helper
#CONFIG_CRYPTO_ALGAPI=yCONFIG_CRYPTO_ALGAPI2=yCONFIG_CRYPTO_AEAD=yCONFIG_CRYPTO_AEAD2=yCONFIG_CRYPTO_SKCIPHER=yCONFIG_CRYPTO_SKCIPHER2=yCONFIG_CRYPTO_HASH=yCONFIG_CRYPTO_HASH2=yCONFIG_CRYPTO_RNG=yCONFIG_CRYPTO_RNG2=yCONFIG_CRYPTO_RNG_DEFAULT=yCONFIG_CRYPTO_AKCIPHER2=yCONFIG_CRYPTO_AKCIPHER=yCONFIG_CRYPTO_KPP2=yCONFIG_CRYPTO_KPP=yCONFIG_CRYPTO_ACOMP2=yCONFIG_CRYPTO_MANAGER=yCONFIG_CRYPTO_MANAGER2=yCONFIG_CRYPTO_USER=yCONFIG_CRYPTO_MANAGER_DISABLE_TESTS=yCONFIG_CRYPTO_GF128MUL=yCONFIG_CRYPTO_NULL=yCONFIG_CRYPTO_NULL2=y
# CONFIG_CRYPTO_CRYPTD is not setCONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_TEST is not setCONFIG_CRYPTO_ENGINE=y
# end of Crypto core or helper
#
# Public-key cryptography
#CONFIG_CRYPTO_RSA=yCONFIG_CRYPTO_DH=yCONFIG_CRYPTO_DH_RFC7919_GROUPS=yCONFIG_CRYPTO_ECC=yCONFIG_CRYPTO_ECDH=yCONFIG_CRYPTO_ECDSA=yCONFIG_CRYPTO_ECRDSA=y
# CONFIG_CRYPTO_SM2 is not setCONFIG_CRYPTO_CURVE25519=y
# end of Public-key cryptography
#
# Block ciphers
#CONFIG_CRYPTO_AES=yCONFIG_CRYPTO_AES_TI=y
# CONFIG_CRYPTO_ANUBIS is not setCONFIG_CRYPTO_ARIA=yCONFIG_CRYPTO_BLOWFISH=yCONFIG_CRYPTO_BLOWFISH_COMMON=y
# CONFIG_CRYPTO_CAMELLIA is not setCONFIG_CRYPTO_CAST_COMMON=yCONFIG_CRYPTO_CAST5=yCONFIG_CRYPTO_CAST6=y
# CONFIG_CRYPTO_DES is not setCONFIG_CRYPTO_FCRYPT=yCONFIG_CRYPTO_KHAZAD=y
# CONFIG_CRYPTO_SEED is not setCONFIG_CRYPTO_SERPENT=yCONFIG_CRYPTO_SM4=yCONFIG_CRYPTO_SM4_GENERIC=y
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
# end of Block ciphers
#
# Length-preserving ciphers and modes
#CONFIG_CRYPTO_ADIANTUM=yCONFIG_CRYPTO_ARC4=yCONFIG_CRYPTO_CHACHA20=yCONFIG_CRYPTO_CBC=yCONFIG_CRYPTO_CFB=yCONFIG_CRYPTO_CTR=yCONFIG_CRYPTO_CTS=yCONFIG_CRYPTO_ECB=yCONFIG_CRYPTO_HCTR2=yCONFIG_CRYPTO_KEYWRAP=yCONFIG_CRYPTO_LRW=y
# CONFIG_CRYPTO_OFB is not setCONFIG_CRYPTO_PCBC=yCONFIG_CRYPTO_XCTR=y
# CONFIG_CRYPTO_XTS is not setCONFIG_CRYPTO_NHPOLY1305=y
# end of Length-preserving ciphers and modes
#
# AEAD (authenticated encryption with associated data) ciphers #CONFIG_CRYPTO_AEGIS128=y CONFIG_CRYPTO_CHACHA20POLY1305=yCONFIG_CRYPTO_CCM=y
# CONFIG_CRYPTO_GCM is not setCONFIG_CRYPTO_SEQIV=y
# CONFIG_CRYPTO_ECHAINIV is not set CONFIG_CRYPTO_ESSIV=y
# end of AEAD (authenticated encryption with associated data) ciphers
#
# Hashes, digests, and MACs
#CONFIG_CRYPTO_BLAKE2B=yCONFIG_CRYPTO_CMAC=y
# CONFIG_CRYPTO_GHASH is not setCONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_MD4 is not setCONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not setCONFIG_CRYPTO_POLYVAL=yCONFIG_CRYPTO_POLY1305=y
# CONFIG_CRYPTO_RMD160 is not setCONFIG_CRYPTO_SHA1=yCONFIG_CRYPTO_SHA256=yCONFIG_CRYPTO_SHA512=yCONFIG_CRYPTO_SHA3=yCONFIG_CRYPTO_SM3=yCONFIG_CRYPTO_SM3_GENERIC=yCONFIG_CRYPTO_STREEBOG=yCONFIG_CRYPTO_VMAC=yCONFIG_CRYPTO_WP512=yCONFIG_CRYPTO_XCBC=yCONFIG_CRYPTO_XXHASH=y
# end of Hashes, digests, and MACs
#
# CRCs (cyclic redundancy checks)
#CONFIG_CRYPTO_CRC32C=yCONFIG_CRYPTO_CRC32=yCONFIG_CRYPTO_CRCT10DIF=yCONFIG_CRYPTO_CRC64_ROCKSOFT=y
# end of CRCs (cyclic redundancy checks)
#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not setCONFIG_CRYPTO_LZO=yCONFIG_CRYPTO_842=y
# CONFIG_CRYPTO_LZ4 is not set
# CONFIG_CRYPTO_LZ4HC is not set
# CONFIG_CRYPTO_ZSTD is not set
# end of Compression
#
# Random number generation
#CONFIG_CRYPTO_ANSI_CPRNG=yCONFIG_CRYPTO_DRBG_MENU=yCONFIG_CRYPTO_DRBG_HMAC=y
# CONFIG_CRYPTO_DRBG_HASH is not set
# CONFIG_CRYPTO_DRBG_CTR is not setCONFIG_CRYPTO_DRBG=yCONFIG_CRYPTO_JITTERENTROPY=yCONFIG_CRYPTO_KDF800108_CTR=y
# end of Random number generation
#
# Userspace interface
#CONFIG_CRYPTO_USER_API=yCONFIG_CRYPTO_USER_API_HASH=yCONFIG_CRYPTO_USER_API_SKCIPHER=y
# CONFIG_CRYPTO_USER_API_RNG is not setCONFIG_CRYPTO_USER_API_AEAD=yCONFIG_CRYPTO_USER_API_ENABLE_OBSOLETE=y
# CONFIG_CRYPTO_STATS is not set
# end of Userspace interface
CONFIG_CRYPTO_HASH_INFO=y CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_ALLWINNER is not set
# CONFIG_CRYPTO_DEV_EXYNOS_RNG is not set # CONFIG_CRYPTO_DEV_S5P is not set
# CONFIG_CRYPTO_DEV_ATMEL_AES is not set
# CONFIG_CRYPTO_DEV_ATMEL_TDES is not set # CONFIG_CRYPTO_DEV_ATMEL_SHA is not set CONFIG_CRYPTO_DEV_ATMEL_I2C=y CONFIG_CRYPTO_DEV_ATMEL_ECC=y
# CONFIG_CRYPTO_DEV_ATMEL_SHA204A is not set # CONFIG_CRYPTO_DEV_QCE is not set
# CONFIG_CRYPTO_DEV_QCOM_RNG is not set
# CONFIG_CRYPTO_DEV_IMGTEC_HASH is not set # CONFIG_CRYPTO_DEV_ZYNQMP_AES is not set # CONFIG_CRYPTO_DEV_ZYNQMP_SHA3 is not set # CONFIG_CRYPTO_DEV_VIRTIO is not set CONFIG_CRYPTO_DEV_SAFEXCEL=y
# CONFIG_CRYPTO_DEV_CCREE is not set
# CONFIG_CRYPTO_DEV_HISI_SEC is not set CONFIG_CRYPTO_DEV_AMLOGIC_GXL=y CONFIG_CRYPTO_DEV_AMLOGIC_GXL_DEBUG=y
# CONFIG_CRYPTO_DEV_SA2UL is not set
# CONFIG_CRYPTO_DEV_KEEMBAY_OCS_AES_SM4 is not set # CONFIG_CRYPTO_DEV_KEEMBAY_OCS_ECC is not set # CONFIG_CRYPTO_DEV_KEEMBAY_OCS_HCU is not set # CONFIG_CRYPTO_DEV_ASPEED is not set CONFIG_ASYMMETRIC_KEY_TYPE=y CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
# CONFIG_X509_CERTIFICATE_PARSER is not set # CONFIG_PKCS8_PRIVATE_KEY_PARSER is not set
#
# Certificates for signature checking
#CONFIG_SYSTEM_BLACKLIST_KEYRING=yCONFIG_SYSTEM_BLACKLIST_HASH_LIST=""
# end of Certificates for signature checking
CONFIG_BINARY_PRINTF=y
#
# Library routines
#CONFIG_RAID6_PQ=yCONFIG_RAID6_PQ_BENCHMARK=yCONFIG_LINEAR_RANGES=y
# CONFIG_PACKING is not setCONFIG_BITREVERSE=yCONFIG_GENERIC_STRNCPY_FROM_USER=yCONFIG_GENERIC_STRNLEN_USER=yCONFIG_GENERIC_NET_UTILS=yCONFIG_CORDIC=yCONFIG_PRIME_NUMBERS=yCONFIG_GENERIC_PCI_IOMAP=y
#
# Crypto library routines
#CONFIG_CRYPTO_LIB_UTILS=yCONFIG_CRYPTO_LIB_AES=yCONFIG_CRYPTO_LIB_ARC4=yCONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=yCONFIG_CRYPTO_LIB_CHACHA_GENERIC=yCONFIG_CRYPTO_LIB_CHACHA=yCONFIG_CRYPTO_LIB_CURVE25519_GENERIC=yCONFIG_CRYPTO_LIB_CURVE25519=yCONFIG_CRYPTO_LIB_DES=yCONFIG_CRYPTO_LIB_POLY1305_RSIZE=1CONFIG_CRYPTO_LIB_POLY1305_GENERIC=yCONFIG_CRYPTO_LIB_POLY1305=yCONFIG_CRYPTO_LIB_CHACHA20POLY1305=yCONFIG_CRYPTO_LIB_SHA1=yCONFIG_CRYPTO_LIB_SHA256=y
# end of Crypto library routines
CONFIG_CRC_CCITT=yCONFIG_CRC16=yCONFIG_CRC_T10DIF=yCONFIG_CRC64_ROCKSOFT=yCONFIG_CRC_ITU_T=yCONFIG_CRC32=yCONFIG_CRC32_SELFTEST=yCONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not setCONFIG_CRC64=yCONFIG_CRC4=yCONFIG_CRC7=yCONFIG_LIBCRC32C=yCONFIG_CRC8=yCONFIG_XXHASH=y
# CONFIG_RANDOM32_SELFTEST is not setCONFIG_842_COMPRESS=yCONFIG_842_DECOMPRESS=yCONFIG_ZLIB_INFLATE=yCONFIG_ZLIB_DEFLATE=yCONFIG_LZO_COMPRESS=yCONFIG_LZO_DECOMPRESS=yCONFIG_LZ4_COMPRESS=yCONFIG_LZ4_DECOMPRESS=yCONFIG_ZSTD_COMMON=yCONFIG_ZSTD_COMPRESS=yCONFIG_ZSTD_DECOMPRESS=y
# CONFIG_XZ_DEC is not setCONFIG_DECOMPRESS_GZIP=yCONFIG_DECOMPRESS_BZIP2=yCONFIG_DECOMPRESS_LZ4=yCONFIG_REED_SOLOMON=yCONFIG_REED_SOLOMON_ENC16=yCONFIG_REED_SOLOMON_DEC16=yCONFIG_BCH=yCONFIG_INTERVAL_TREE=yCONFIG_ASSOCIATIVE_ARRAY=yCONFIG_HAS_IOMEM=yCONFIG_HAS_IOPORT_MAP=yCONFIG_HAS_DMA=yCONFIG_DMA_OPS=yCONFIG_NEED_SG_DMA_LENGTH=yCONFIG_NEED_DMA_MAP_STATE=yCONFIG_ARCH_HAS_SYNC_DMA_FOR_DEVICE=yCONFIG_ARCH_HAS_SYNC_DMA_FOR_CPU=y
# CONFIG_DMA_API_DEBUG is not setCONFIG_DMA_MAP_BENCHMARK=yCONFIG_SGL_ALLOC=yCONFIG_DQL=yCONFIG_GLOB=yCONFIG_GLOB_SELFTEST=yCONFIG_NLATTR=yCONFIG_GENERIC_ATOMIC64=yCONFIG_CLZ_TAB=y
# CONFIG_IRQ_POLL is not setCONFIG_MPILIB=yCONFIG_OID_REGISTRY=yCONFIG_FONT_SUPPORT=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=yCONFIG_SG_POOL=yCONFIG_ARCH_NO_SG_CHAIN=yCONFIG_ARCH_STACKWALK=yCONFIG_STACKDEPOT=yCONFIG_REF_TRACKER=yCONFIG_SBITMAP=y
# CONFIG_PARMAN is not set
# CONFIG_OBJAGG is not set
# end of Library routines
CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED=y
#
# Kernel hacking
#
#
# printk and dmesg options # CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7 CONFIG_CONSOLE_LOGLEVEL_QUIET=4 CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4 # CONFIG_SYMBOLIC_ERRNAME is not set CONFIG_DEBUG_BUGVERBOSE=y # end of printk and dmesg options
CONFIG_DEBUG_KERNEL=yCONFIG_DEBUG_MISC=y
#
# Compile-time checks and compiler options
#CONFIG_DEBUG_INFO=yCONFIG_AS_HAS_NON_CONST_LEB128=y
# CONFIG_DEBUG_INFO_NONE is not setCONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
# CONFIG_DEBUG_INFO_DWARF4 is not set
# CONFIG_DEBUG_INFO_DWARF5 is not setCONFIG_DEBUG_INFO_REDUCED=yCONFIG_DEBUG_INFO_COMPRESSED=y
# CONFIG_DEBUG_INFO_SPLIT is not setCONFIG_PAHOLE_HAS_SPLIT_BTF=y
# CONFIG_GDB_SCRIPTS is not setCONFIG_FRAME_WARN=2048
# CONFIG_STRIP_ASM_SYMS is not setCONFIG_READABLE_ASM=yCONFIG_HEADERS_INSTALL=yCONFIG_DEBUG_SECTION_MISMATCH=yCONFIG_SECTION_MISMATCH_WARN_ONLY=yCONFIG_ARCH_WANT_FRAME_POINTERS=yCONFIG_FRAME_POINTER=yCONFIG_VMLINUX_MAP=yCONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
# end of Compile-time checks and compiler options
#
# Generic Kernel Debugging Instruments
#CONFIG_MAGIC_SYSRQ=yCONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
# CONFIG_MAGIC_SYSRQ_SERIAL is not setCONFIG_DEBUG_FS=y
# CONFIG_DEBUG_FS_ALLOW_ALL is not set
# CONFIG_DEBUG_FS_DISALLOW_MOUNT is not setCONFIG_DEBUG_FS_ALLOW_NONE=yCONFIG_HAVE_ARCH_KGDB=yCONFIG_KGDB=yCONFIG_KGDB_SERIAL_CONSOLE=y
# CONFIG_KGDB_TESTS is not set
# CONFIG_KGDB_KDB is not setCONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
# CONFIG_UBSAN is not setCONFIG_HAVE_KCSAN_COMPILER=y
# end of Generic Kernel Debugging Instruments
#
# Networking Debugging
#
# CONFIG_NET_DEV_REFCNT_TRACKER is not setCONFIG_NET_NS_REFCNT_TRACKER=yCONFIG_DEBUG_NET=y
# end of Networking Debugging
#
# Memory Debugging
#CONFIG_PAGE_EXTENSION=y CONFIG_DEBUG_PAGEALLOC=y
# CONFIG_DEBUG_PAGEALLOC_ENABLE_DEFAULT is not set CONFIG_PAGE_OWNER=y CONFIG_PAGE_POISONING=y
# CONFIG_DEBUG_PAGE_REF is not set
# CONFIG_DEBUG_RODATA_TEST is not set
# CONFIG_DEBUG_OBJECTS is not set CONFIG_SHRINKER_DEBUG=y CONFIG_DEBUG_STACK_USAGE=y
# CONFIG_SCHED_STACK_END_CHECK is not set CONFIG_ARCH_HAS_DEBUG_VM_PGTABLE=y CONFIG_DEBUG_VM_IRQSOFF=y CONFIG_DEBUG_VM=y
# CONFIG_DEBUG_VM_MAPLE_TREE is not set
# CONFIG_DEBUG_VM_RB is not set CONFIG_DEBUG_VM_PGFLAGS=y CONFIG_DEBUG_VM_PGTABLE=y CONFIG_DEBUG_MEMORY_INIT=y CONFIG_HAVE_DEBUG_STACKOVERFLOW=y CONFIG_DEBUG_STACKOVERFLOW=y CONFIG_CC_HAS_WORKING_NOSANITIZE_ADDRESS=y CONFIG_HAVE_ARCH_KFENCE=y
# end of Memory Debugging
# CONFIG_DEBUG_SHIRQ is not set
#
# Debug Oops, Lockups and Hangs
#CONFIG_PANIC_ON_OOPS=yCONFIG_PANIC_ON_OOPS_VALUE=1CONFIG_PANIC_TIMEOUT=0
# CONFIG_SOFTLOCKUP_DETECTOR is not setCONFIG_DETECT_HUNG_TASK=yCONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
# CONFIG_WQ_WATCHDOG is not set
# end of Debug Oops, Lockups and Hangs
#
# Scheduler Debugging
#
# end of Scheduler Debugging
CONFIG_DEBUG_TIMEKEEPING=y
#
# Lock Debugging (spinlocks, mutexes, etc...)
#CONFIG_DEBUG_RT_MUTEXES=y
# CONFIG_DEBUG_SPINLOCK is not setCONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_RWSEMS is not setCONFIG_DEBUG_ATOMIC_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_LOCK_TORTURE_TEST is not set
# CONFIG_WW_MUTEX_SELFTEST is not set
# CONFIG_SCF_TORTURE_TEST is not set
# end of Lock Debugging (spinlocks, mutexes, etc...)
# CONFIG_DEBUG_IRQFLAGS is not setCONFIG_STACKTRACE=yCONFIG_WARN_ALL_UNSEEDED_RANDOM=yCONFIG_DEBUG_KOBJECT=y
#
# Debug kernel data structures
#CONFIG_DEBUG_LIST=yCONFIG_DEBUG_PLIST=yCONFIG_DEBUG_SG=y
# CONFIG_DEBUG_NOTIFIERS is not setCONFIG_BUG_ON_DATA_CORRUPTION=y
# CONFIG_DEBUG_MAPLE_TREE is not set
# end of Debug kernel data structures
CONFIG_DEBUG_CREDENTIALS=y
#
# RCU Debugging
#CONFIG_TORTURE_TEST=yCONFIG_RCU_SCALE_TEST=yCONFIG_RCU_TORTURE_TEST=yCONFIG_RCU_REF_SCALE_TEST=y
# CONFIG_RCU_TRACE is not setCONFIG_RCU_EQS_DEBUG=y
# end of RCU Debugging
# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set CONFIG_NOP_TRACER=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_HAVE_SYSCALL_TRACEPOINTS=y CONFIG_TRACER_MAX_TRACE=y CONFIG_TRACE_CLOCK=yCONFIG_RING_BUFFER=yCONFIG_EVENT_TRACING=y CONFIG_CONTEXT_SWITCH_TRACER=y CONFIG_RING_BUFFER_ALLOW_SWAP=y CONFIG_TRACING=yCONFIG_GENERIC_TRACER=y CONFIG_TRACING_SUPPORT=yCONFIG_FTRACE=y
# CONFIG_BOOTTIME_TRACING is not set CONFIG_FUNCTION_TRACER=y CONFIG_FUNCTION_GRAPH_TRACER=y CONFIG_DYNAMIC_FTRACE=y CONFIG_DYNAMIC_FTRACE_WITH_REGS=y CONFIG_FUNCTION_PROFILER=y
# CONFIG_STACK_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set CONFIG_HWLAT_TRACER=y CONFIG_OSNOISE_TRACER=y CONFIG_TIMERLAT_TRACER=y CONFIG_FTRACE_SYSCALLS=y CONFIG_TRACER_SNAPSHOT=y CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP=y CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set # CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_BLK_DEV_IO_TRACE is not set CONFIG_DYNAMIC_EVENTS=y CONFIG_FTRACE_MCOUNT_RECORD=y CONFIG_FTRACE_MCOUNT_USE_PATCHABLE_FUNCTION_ENTRY=y CONFIG_TRACING_MAP=yCONFIG_SYNTH_EVENTS=y
# CONFIG_USER_EVENTS is not set CONFIG_HIST_TRIGGERS=y
# CONFIG_TRACE_EVENT_INJECT is not set
# CONFIG_TRACEPOINT_BENCHMARK is not set CONFIG_RING_BUFFER_BENCHMARK=y
# CONFIG_TRACE_EVAL_MAP_FILE is not set
# CONFIG_FTRACE_RECORD_RECURSION is not set # CONFIG_FTRACE_STARTUP_TEST is not set CONFIG_RING_BUFFER_STARTUP_TEST=y CONFIG_RING_BUFFER_VALIDATE_TIME_DELTAS=y CONFIG_SYNTH_EVENT_GEN_TEST=y CONFIG_HIST_TRIGGERS_DEBUG=y CONFIG_DA_MON_EVENTS=y CONFIG_DA_MON_EVENTS_ID=yCONFIG_RV=yCONFIG_RV_MON_WWNR=yCONFIG_RV_REACTORS=y
# CONFIG_RV_REACT_PRINTK is not set CONFIG_RV_REACT_PANIC=y
# CONFIG_SAMPLES is not set CONFIG_STRICT_DEVMEM=y
# CONFIG_IO_STRICT_DEVMEM is not set
#
# parisc Debugging # # end of parisc Debugging
#
# Kernel Testing and Coverage
#CONFIG_KUNIT=yCONFIG_KUNIT_DEBUGFS=yCONFIG_KUNIT_TEST=yCONFIG_KUNIT_EXAMPLE_TEST=yCONFIG_KUNIT_ALL_TESTS=yCONFIG_KUNIT_DEFAULT_ENABLED=yCONFIG_NOTIFIER_ERROR_INJECTION=yCONFIG_OF_RECONFIG_NOTIFIER_ERROR_INJECT=y
# CONFIG_NETDEV_NOTIFIER_ERROR_INJECT is not set
# CONFIG_FAULT_INJECTION is not setCONFIG_CC_HAS_SANCOV_TRACE_PC=yCONFIG_RUNTIME_TESTING_MENU=yCONFIG_LKDTM=yCONFIG_CPUMASK_KUNIT_TEST=yCONFIG_TEST_LIST_SORT=yCONFIG_TEST_MIN_HEAP=yCONFIG_TEST_SORT=yCONFIG_TEST_DIV64=y
# CONFIG_BACKTRACE_SELF_TEST is not setCONFIG_TEST_REF_TRACKER=yCONFIG_RBTREE_TEST=yCONFIG_REED_SOLOMON_TEST=yCONFIG_INTERVAL_TREE_TEST=yCONFIG_ATOMIC64_SELFTEST=y
# CONFIG_TEST_HEXDUMP is not set
# CONFIG_STRING_SELFTEST is not set
# CONFIG_TEST_STRING_HELPERS is not setCONFIG_TEST_STRSCPY=yCONFIG_TEST_KSTRTOX=y
# CONFIG_TEST_PRINTF is not setCONFIG_TEST_SCANF=y
# CONFIG_TEST_BITMAP is not set
# CONFIG_TEST_UUID is not set
# CONFIG_TEST_XARRAY is not set
# CONFIG_TEST_RHASHTABLE is not setCONFIG_TEST_SIPHASH=yCONFIG_TEST_IDA=yCONFIG_FIND_BIT_BENCHMARK=yCONFIG_TEST_FIRMWARE=yCONFIG_BITFIELD_KUNIT=yCONFIG_HASH_KUNIT_TEST=yCONFIG_RESOURCE_KUNIT_TEST=yCONFIG_SYSCTL_KUNIT_TEST=yCONFIG_LIST_KUNIT_TEST=y
# CONFIG_LINEAR_RANGES_TEST is not setCONFIG_CMDLINE_KUNIT_TEST=yCONFIG_BITS_TEST=yCONFIG_MEMCPY_KUNIT_TEST=yCONFIG_IS_SIGNED_TYPE_KUNIT_TEST=yCONFIG_OVERFLOW_KUNIT_TEST=yCONFIG_STACKINIT_KUNIT_TEST=yCONFIG_TEST_UDELAY=yCONFIG_TEST_MEMCAT_P=y
# CONFIG_TEST_MEMINIT is not setCONFIG_TEST_FREE_PAGES=y
# end of Kernel Testing and Coverage
#
# Rust hacking
#
# end of Rust hacking
# CONFIG_WARN_MISSING_DOCUMENTS is not set
# CONFIG_WARN_ABI_ERRORS is not set
# end of Kernel hacking