Skip to contentSkip to conversation

wifi: rtw89: 8852b: correct TX power controlled by BT-coexistence

PATCH In review Ping-Ke Shih 2 participants 2 messages Nov 17, 2022 – Nov 22, 2022 Realtek wireless driver (rtw89)

lore
Share & tools
lore

Ping-Ke Shih

author maintainer
#0 lore raw

PATCH 1/1 wifi: rtw89: 8852b: correct TX power controlled by BT-coexistence

When coexistence mechanism is under free-run mode, it could adjust WiFi and BT TX power to avoid interference with each other. For other cases, it should keep original TX power from regular predefined tables, so set correct values to 255 for these cases.

---
 drivers/net/wireless/realtek/rtw89/rtw8852b.c | 30 +++++++++----------
 1 file changed, 15 insertions(+), 15 deletions(-)
drivers/net/wireless/realtek/rtw89/rtw8852b.c +15 -15
index 0df044b1c392a..85dfc1ebb0d97 100644
@@ -318,27 +318,27 @@ static const struct rtw89_dig_regs rtw8852b_dig_regs = {
 };
 
 static const struct rtw89_btc_rf_trx_para rtw89_btc_8852b_rf_ul[] = {
-	{15, 0, 0, 7}, /* 0 -> original */
-	{15, 2, 0, 7}, /* 1 -> for BT-connected ACI issue && BTG co-rx */
-	{15, 0, 0, 7}, /* 2 ->reserved for shared-antenna */
-	{15, 0, 0, 7}, /* 3- >reserved for shared-antenna */
-	{15, 0, 0, 7}, /* 4 ->reserved for shared-antenna */
-	{15, 0, 0, 7}, /* the below id is for non-shared-antenna free-run */
+	{255, 0, 0, 7}, /* 0 -> original */
+	{255, 2, 0, 7}, /* 1 -> for BT-connected ACI issue && BTG co-rx */
+	{255, 0, 0, 7}, /* 2 ->reserved for shared-antenna */
+	{255, 0, 0, 7}, /* 3- >reserved for shared-antenna */
+	{255, 0, 0, 7}, /* 4 ->reserved for shared-antenna */
+	{255, 0, 0, 7}, /* the below id is for non-shared-antenna free-run */
 	{6, 1, 0, 7},
 	{13, 1, 0, 7},
 	{13, 1, 0, 7}
 };
 
 static const struct rtw89_btc_rf_trx_para rtw89_btc_8852b_rf_dl[] = {
-	{15, 0, 0, 7}, /* 0 -> original */
-	{15, 2, 0, 7}, /* 1 -> reserved for shared-antenna */
-	{15, 0, 0, 7}, /* 2 ->reserved for shared-antenna */
-	{15, 0, 0, 7}, /* 3- >reserved for shared-antenna */
-	{15, 0, 0, 7}, /* 4 ->reserved for shared-antenna */
-	{15, 0, 0, 7}, /* the below id is for non-shared-antenna free-run */
-	{15, 1, 0, 7},
-	{15, 1, 0, 7},
-	{15, 1, 0, 7}
+	{255, 0, 0, 7}, /* 0 -> original */
+	{255, 2, 0, 7}, /* 1 -> reserved for shared-antenna */
+	{255, 0, 0, 7}, /* 2 ->reserved for shared-antenna */
+	{255, 0, 0, 7}, /* 3- >reserved for shared-antenna */
+	{255, 0, 0, 7}, /* 4 ->reserved for shared-antenna */
+	{255, 0, 0, 7}, /* the below id is for non-shared-antenna free-run */
+	{255, 1, 0, 7},
+	{255, 1, 0, 7},
+	{255, 1, 0, 7}
 };
 
 static const struct rtw89_btc_fbtc_mreg rtw89_btc_8852b_mon_reg[] = {
Signature · 1 line
2.25.1
#1 lore raw
Quoted 6 lines · Ping-Ke Shih

When coexistence mechanism is under free-run mode, it could adjust WiFi and BT TX power to avoid interference with each other. For other cases, it should keep original TX power from regular predefined tables, so set correct values to 255 for these cases.

Patch applied to wireless-next.git, thanks.

79ca91a3c1f1 wifi: rtw89: 8852b: correct TX power controlled by BT-coexistence

Signature · 3 lines
https://patchwork.kernel.org/project/linux-wireless/patch/[email protected]/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches