Add TLP filter support and some fixes for HiSilicon PCIe PMU
Subsystems (4)
v3 cover Add TLP filter support and some fixes for HiSilicon PCIe PMU
From: Yicong Yang <[email protected]>
HiSilicon PCIe PMU support count the bandwidth of TLP headers, TLP payloads or both. Add support for it. User can set this through perf tool's 'len_mode' like:
$# perf stat -e hisi_pcie0_core0/rx_mrd_flux,len_mode=0x1/ sleep 5
Also includes fixes and improvement of both driver and documentation in this series.
Change since v2:
- Take Patch 3 advance in the series and drop the fix tag, Per Jonathan
- Add tags from Jonathan for Patch 3-4, Thanks.
Change since v1:
- Refine the documentation per Jonathan and Bagas
- Collect tags from Jonathan. Thanks.
Bagas Sanjaya (1):
Documentation: perf: Indent filter options list of hisi-pcie-pmu
Yicong Yang (3):
drivers/perf: hisi: Fix some event id for hisi-pcie-pmu
docs: perf: Fix PMU instance name of hisi-pcie-pmu drivers/perf: hisi: Add TLP filter support
.../admin-guide/perf/hisi-pcie-pmu.rst | 112 +++++++++++------- drivers/perf/hisilicon/hisi_pcie_pmu.c | 22 +++- 2 files changed, 85 insertions(+), 49 deletions(-)
Signature · 1 line
2.24.0
PATCH v3 1/4 drivers/perf: hisi: Fix some event id for hisi-pcie-pmu
From: Yicong Yang <[email protected]>
Some event id of hisi-pcie-pmu is incorrect, fix them.
--- drivers/perf/hisilicon/hisi_pcie_pmu.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/perf/hisilicon/hisi_pcie_pmu.c +4 -4
@@ -693,10 +693,10 @@ static struct attribute *hisi_pcie_pmu_events_attr[] = {HISI_PCIE_PMU_EVENT_ATTR (rx_mrd_cnt,0x10210 ),HISI_PCIE_PMU_EVENT_ATTR (tx_mrd_latency,0x0011 ),HISI_PCIE_PMU_EVENT_ATTR (tx_mrd_cnt,0x10011 ), -HISI_PCIE_PMU_EVENT_ATTR (rx_mrd_flux,0x1005 ), -HISI_PCIE_PMU_EVENT_ATTR (rx_mrd_time,0x11005 ), -HISI_PCIE_PMU_EVENT_ATTR (tx_mrd_flux,0x2004 ), -HISI_PCIE_PMU_EVENT_ATTR (tx_mrd_time,0x12004 ), +HISI_PCIE_PMU_EVENT_ATTR (rx_mrd_flux,0x0804 ), +HISI_PCIE_PMU_EVENT_ATTR (rx_mrd_time,0x10804 ), +HISI_PCIE_PMU_EVENT_ATTR (tx_mrd_flux,0x0405 ), +HISI_PCIE_PMU_EVENT_ATTR (tx_mrd_time,0x10405 ), NULL };
Signature · 1 line
2.24.0
PATCH v3 2/4 docs: perf: Fix PMU instance name of hisi-pcie-pmu
In reply to Yicong YangFrom: Yicong Yang <[email protected]>
The PMU instance will be called hisi_pcie<sicl>_core<core> rather than hisi_pcie<sicl>_<core>. Fix this in the documentation.
--- .../admin-guide/perf/hisi-pcie-pmu.rst | 22 +++++++++---------- 1 file changed, 11 insertions(+), 11 deletions(-)
Documentation/admin-guide/perf/hisi-pcie-pmu.rst +11 -11
@@ -15,10 +15,10 @@ HiSilicon PCIe PMU driver The PCIe PMU driver registers a perf PMU with the name of its sicl-id and PCIe Core id.:: - /sys/bus/event_source/hisi_pcie<sicl>_<core> + /sys/bus/event_source/hisi_pcie<sicl>_core<core> PMU driver provides description of available events and filter options in sysfs, -see /sys/bus/event_source/devices/hisi_pcie<sicl>_<core>. +see /sys/bus/event_source/devices/hisi_pcie<sicl>_core<core>. The "format" directory describes all formats of the config (events) and config1 (filter options) fields of the perf_event_attr structure. The "events" directory
@@ -33,13 +33,13 @@ monitored by PMU. Example usage of perf:: $# perf list - hisi_pcie0_0/rx_mwr_latency/ [kernel PMU event] - hisi_pcie0_0/rx_mwr_cnt/ [kernel PMU event] + hisi_pcie0_core0/rx_mwr_latency/ [kernel PMU event] + hisi_pcie0_core0/rx_mwr_cnt/ [kernel PMU event] ------------------------------------------ - $# perf stat -e hisi_pcie0_0/rx_mwr_latency/ - $# perf stat -e hisi_pcie0_0/rx_mwr_cnt/ - $# perf stat -g -e hisi_pcie0_0/rx_mwr_latency/ -e hisi_pcie0_0/rx_mwr_cnt/ + $# perf stat -e hisi_pcie0_core0/rx_mwr_latency/ + $# perf stat -e hisi_pcie0_core0/rx_mwr_cnt/ + $# perf stat -g -e hisi_pcie0_core0/rx_mwr_latency/ -e hisi_pcie0_core0/rx_mwr_cnt/ The current driver does not support sampling. So "perf record" is unsupported. Also attach to a task is unsupported for PCIe PMU.
@@ -64,7 +64,7 @@ bit8 is set, port=0x100; if these two Root Ports are both monitored, port=0x101. Example usage of perf:: - $# perf stat -e hisi_pcie0_0/rx_mwr_latency,port=0x1/ sleep 5 + $# perf stat -e hisi_pcie0_core0/rx_mwr_latency,port=0x1/ sleep 5 -bdf
@@ -76,7 +76,7 @@ For example, "bdf=0x3900" means BDF of target Endpoint is 0000:39:00.0. Example usage of perf:: - $# perf stat -e hisi_pcie0_0/rx_mrd_flux,bdf=0x3900/ sleep 5 + $# perf stat -e hisi_pcie0_core0/rx_mrd_flux,bdf=0x3900/ sleep 5 2. Trigger filter Event statistics start when the first time TLP length is greater/smaller
@@ -90,7 +90,7 @@ means start when TLP length < condition. Example usage of perf:: - $# perf stat -e hisi_pcie0_0/rx_mrd_flux,trig_len=0x4,trig_mode=1/ sleep 5 + $# perf stat -e hisi_pcie0_core0/rx_mrd_flux,trig_len=0x4,trig_mode=1/ sleep 5 3. Threshold filter Counter counts when TLP length within the specified range. You can set the
@@ -103,4 +103,4 @@ when TLP length < threshold. Example usage of perf:: - $# perf stat -e hisi_pcie0_0/rx_mrd_flux,thr_len=0x4,thr_mode=1/ sleep 5 + $# perf stat -e hisi_pcie0_core0/rx_mrd_flux,thr_len=0x4,thr_mode=1/ sleep 5
Signature · 1 line
2.24.0
PATCH v3 3/4 Documentation: perf: Indent filter options list of hisi-pcie-pmu
In reply to Yicong YangFrom: Bagas Sanjaya <[email protected]>
The "Filter options" list have a rather ugly indentation. Also, the first paragraph after list name is rendered without separator (as continuation from the name).
Align the list by indenting the list items and add a blank line separator for each list name.
--- .../admin-guide/perf/hisi-pcie-pmu.rst | 80 ++++++++++--------- 1 file changed, 43 insertions(+), 37 deletions(-)
Documentation/admin-guide/perf/hisi-pcie-pmu.rst +43 -37
@@ -48,59 +48,65 @@ Filter options -------------- 1. Target filter -PMU could only monitor the performance of traffic downstream target Root Ports -or downstream target Endpoint. PCIe PMU driver support "port" and "bdf" -interfaces for users, and these two interfaces aren't supported at the same -time. --port -"port" filter can be used in all PCIe PMU events, target Root Port can be -selected by configuring the 16-bits-bitmap "port". Multi ports can be selected -for AP-layer-events, and only one port can be selected for TL/DL-layer-events. + PMU could only monitor the performance of traffic downstream target Root + Ports or downstream target Endpoint. PCIe PMU driver support "port" and + "bdf" interfaces for users, and these two interfaces aren't supported at the + same time. -For example, if target Root Port is 0000:00:00.0 (x8 lanes), bit0 of bitmap -should be set, port=0x1; if target Root Port is 0000:00:04.0 (x4 lanes), -bit8 is set, port=0x100; if these two Root Ports are both monitored, port=0x101. + - port -Example usage of perf:: + "port" filter can be used in all PCIe PMU events, target Root Port can be + selected by configuring the 16-bits-bitmap "port". Multi ports can be + selected for AP-layer-events, and only one port can be selected for + TL/DL-layer-events. - $# perf stat -e hisi_pcie0_core0/rx_mwr_latency,port=0x1/ sleep 5 + For example, if target Root Port is 0000:00:00.0 (x8 lanes), bit0 of + bitmap should be set, port=0x1; if target Root Port is 0000:00:04.0 (x4 + lanes), bit8 is set, port=0x100; if these two Root Ports are both + monitored, port=0x101. --bdf + Example usage of perf:: -"bdf" filter can only be used in bandwidth events, target Endpoint is selected -by configuring BDF to "bdf". Counter only counts the bandwidth of message -requested by target Endpoint. + $# perf stat -e hisi_pcie0_core0/rx_mwr_latency,port=0x1/ sleep 5 -For example, "bdf=0x3900" means BDF of target Endpoint is 0000:39:00.0. + - bdf -Example usage of perf:: + "bdf" filter can only be used in bandwidth events, target Endpoint is + selected by configuring BDF to "bdf". Counter only counts the bandwidth of + message requested by target Endpoint. + + For example, "bdf=0x3900" means BDF of target Endpoint is 0000:39:00.0. + + Example usage of perf:: - $# perf stat -e hisi_pcie0_core0/rx_mrd_flux,bdf=0x3900/ sleep 5 + $# perf stat -e hisi_pcie0_core0/rx_mrd_flux,bdf=0x3900/ sleep 5 2. Trigger filter -Event statistics start when the first time TLP length is greater/smaller -than trigger condition. You can set the trigger condition by writing "trig_len", -and set the trigger mode by writing "trig_mode". This filter can only be used -in bandwidth events. -For example, "trig_len=4" means trigger condition is 2^4 DW, "trig_mode=0" -means statistics start when TLP length > trigger condition, "trig_mode=1" -means start when TLP length < condition. + Event statistics start when the first time TLP length is greater/smaller + than trigger condition. You can set the trigger condition by writing + "trig_len", and set the trigger mode by writing "trig_mode". This filter can + only be used in bandwidth events. -Example usage of perf:: + For example, "trig_len=4" means trigger condition is 2^4 DW, "trig_mode=0" + means statistics start when TLP length > trigger condition, "trig_mode=1" + means start when TLP length < condition. + + Example usage of perf:: - $# perf stat -e hisi_pcie0_core0/rx_mrd_flux,trig_len=0x4,trig_mode=1/ sleep 5 + $# perf stat -e hisi_pcie0_core0/rx_mrd_flux,trig_len=0x4,trig_mode=1/ sleep 5 3. Threshold filter -Counter counts when TLP length within the specified range. You can set the -threshold by writing "thr_len", and set the threshold mode by writing -"thr_mode". This filter can only be used in bandwidth events. -For example, "thr_len=4" means threshold is 2^4 DW, "thr_mode=0" means -counter counts when TLP length >= threshold, and "thr_mode=1" means counts -when TLP length < threshold. + Counter counts when TLP length within the specified range. You can set the + threshold by writing "thr_len", and set the threshold mode by writing + "thr_mode". This filter can only be used in bandwidth events. -Example usage of perf:: + For example, "thr_len=4" means threshold is 2^4 DW, "thr_mode=0" means + counter counts when TLP length >= threshold, and "thr_mode=1" means counts + when TLP length < threshold. + + Example usage of perf:: - $# perf stat -e hisi_pcie0_core0/rx_mrd_flux,thr_len=0x4,thr_mode=1/ sleep 5 + $# perf stat -e hisi_pcie0_core0/rx_mrd_flux,thr_len=0x4,thr_mode=1/ sleep 5
Signature · 1 line
2.24.0
PATCH v3 4/4 drivers/perf: hisi: Add TLP filter support
In reply to Yicong YangFrom: Yicong Yang <[email protected]>
The PMU support to filter the TLP when counting the bandwidth with below options:
- only count the TLP headers
- only count the TLP payloads
- count both TLP headers and payloads
In the current driver it's default to count the TLP payloads only, which will have an implicity side effects that on the traffic only have header only TLPs, we'll get no data.
Make this user configuration through "len_mode" parameter and make it default to count both TLP headers and payloads when user not specified. Also update the documentation for it.
--- .../admin-guide/perf/hisi-pcie-pmu.rst | 18 ++++++++++++++++++ drivers/perf/hisilicon/hisi_pcie_pmu.c | 14 +++++++++++++- 2 files changed, 31 insertions(+), 1 deletion(-)
Documentation/admin-guide/perf/hisi-pcie-pmu.rst +18 -0
@@ -110,3 +110,21 @@ Filter options Example usage of perf:: $# perf stat -e hisi_pcie0_core0/rx_mrd_flux,thr_len=0x4,thr_mode=1/ sleep 5 + +4. TLP Length filter + + When counting bandwidth, the data can be composed of certain parts of TLP + packets. You can specify it through "len_mode": + + - 2'b00: Reserved (Do not use this since the behaviour is undefined) + - 2'b01: Bandwidth of TLP payloads + - 2'b10: Bandwidth of TLP headers + - 2'b11: Bandwidth of both TLP payloads and headers + + For example, "len_mode=2" means only counting the bandwidth of TLP headers + and "len_mode=3" means the final bandwidth data is composed of both TLP + headers and payloads. Default value if not specified is 2'b11. + + Example usage of perf:: + + $# perf stat -e hisi_pcie0_core0/rx_mrd_flux,len_mode=0x1/ sleep 5
drivers/perf/hisilicon/hisi_pcie_pmu.c +13 -1
@@ -47,10 +47,14 @@#define HISI_PCIE_EVENT_M GENMASK_ULL(15, 0)#define HISI_PCIE_THR_MODE_M GENMASK_ULL(27, 27)#define HISI_PCIE_THR_M GENMASK_ULL(31, 28) +#define HISI_PCIE_LEN_M GENMASK_ULL(35, 34)#define HISI_PCIE_TARGET_M GENMASK_ULL(52, 36)#define HISI_PCIE_TRIG_MODE_M GENMASK_ULL(53, 53)#define HISI_PCIE_TRIG_M GENMASK_ULL(59, 56) +/* Default config of TLP length mode, will count both TLP headers and payloads */ +#define HISI_PCIE_LEN_M_DEFAULT 3ULL +#define HISI_PCIE_MAX_COUNTERS 8#define HISI_PCIE_REG_STEP 8#define HISI_PCIE_THR_MAX_VAL 10
@@ -91,6 +95,7 @@ HISI_PCIE_PMU_FILTER_ATTR(thr_len, config1, 3, 0);HISI_PCIE_PMU_FILTER_ATTR (thr_mode, config1,4 ,4 );HISI_PCIE_PMU_FILTER_ATTR (trig_len, config1,8 ,5 );HISI_PCIE_PMU_FILTER_ATTR (trig_mode, config1,9 ,9 ); +HISI_PCIE_PMU_FILTER_ATTR (len_mode, config1,11 ,10 );HISI_PCIE_PMU_FILTER_ATTR (port, config2,15 ,0 );HISI_PCIE_PMU_FILTER_ATTR (bdf, config2,31 ,16 );
@@ -215,8 +220,8 @@ static void hisi_pcie_pmu_config_filter(struct perf_event *event) {struct hisi_pcie_pmu *pcie_pmu =to_pcie_pmu (event->pmu);struct hw_perf_event *hwc = &event->hw; +u64 port, trig_len, thr_len, len_mode;u64 reg =HISI_PCIE_INIT_SET ; -u64 port, trig_len, thr_len;/* Config HISI_PCIE_EVENT_CTRL according to event. */ reg |=FIELD_PREP (HISI_PCIE_EVENT_M ,hisi_pcie_get_real_event (event));
@@ -245,6 +250,12 @@ static void hisi_pcie_pmu_config_filter(struct perf_event *event) reg |=HISI_PCIE_THR_EN ; } + len_mode =hisi_pcie_get_len_mode (event); +if (len_mode) + reg |=FIELD_PREP (HISI_PCIE_LEN_M , len_mode); +else + reg |=FIELD_PREP (HISI_PCIE_LEN_M ,HISI_PCIE_LEN_M_DEFAULT ); +hisi_pcie_pmu_writeq (pcie_pmu,HISI_PCIE_EVENT_CTRL , hwc->idx, reg); }
@@ -711,6 +722,7 @@ static struct attribute *hisi_pcie_pmu_format_attr[] = {HISI_PCIE_PMU_FORMAT_ATTR (thr_mode,"config1:4" ),HISI_PCIE_PMU_FORMAT_ATTR (trig_len,"config1:5-8" ),HISI_PCIE_PMU_FORMAT_ATTR (trig_mode,"config1:9" ), +HISI_PCIE_PMU_FORMAT_ATTR (len_mode,"config1:10-11" ),HISI_PCIE_PMU_FORMAT_ATTR (port,"config2:0-15" ),HISI_PCIE_PMU_FORMAT_ATTR (bdf,"config2:16-31" ),NULL
Signature · 1 line
2.24.0
a gentle ping for this...
Quoted 33 lines · Yicong Yang
From: Yicong Yang <[email protected]>
HiSilicon PCIe PMU support count the bandwidth of TLP headers, TLP payloads or both. Add support for it. User can set this through perf tool's '
len_mode' like:$# perf stat -e hisi_pcie0_core0/rx_mrd_flux,len_mode=0x1/ sleep 5
Also includes fixes and improvement of both driver and documentation in this series.
Change since v2:
- Take Patch 3 advance in the series and drop the fix tag, Per Jonathan
- Add tags from Jonathan for Patch 3-4, Thanks.Change since v1:
- Refine the documentation per Jonathan and Bagas
- Collect tags from Jonathan. Thanks.Bagas Sanjaya (1):
Documentation: perf: Indent filter options list of hisi-pcie-pmuYicong Yang (3):
drivers/perf: hisi: Fix some event id for hisi-pcie-pmu
docs: perf: Fix PMU instance name of hisi-pcie-pmudrivers/perf: hisi: Add TLP filter support.../admin-guide/perf/hisi-pcie-pmu.rst | 112 +++++++++++------- drivers/perf/hisilicon/hisi_pcie_pmu.c | 22 +++- 2 files changed, 85 insertions(+), 49 deletions(-)
Quoted 9 lines · Yicong Yang
From: Yicong Yang <[email protected]>
HiSilicon PCIe PMU support count the bandwidth of TLP headers, TLP payloads or both. Add support for it. User can set this through perf tool's '
len_mode' like:$# perf stat -e hisi_pcie0_core0/rx_mrd_flux,len_mode=0x1/ sleep 5
[...]
Applied to will (for-next/perf), thanks!
[1/4] drivers/perf: hisi: Fix some event id for hisi-pcie-pmu
https://git.kernel.org/will/c/6b4bb4f38dbf [2/4] docs: perf: Fix PMU instance name of hisi-pcie-pmu https://git.kernel.org/will/c/eb79f12b4c41 [3/4] Documentation: perf: Indent filter options list of hisi-pcie-pmu https://git.kernel.org/will/c/c8dff677e6d4 [4/4] drivers/perf: hisi: Add TLP filter support https://git.kernel.org/will/c/17d573984d4d
Cheers,
Signature · 5 lines
Will https://fixes.arm64.dev https://next.arm64.dev https://will.arm64.dev