Skip to contentSkip to conversation

wifi: rtw89: avoid inaccessible IO operations during doing change_interface()

PATCH In review Ping-Ke Shih 2 participants 2 messages Nov 17, 2022 – Nov 22, 2022 Realtek wireless driver (rtw89)

lore
Share & tools
lore

Ping-Ke Shih

author maintainer
#0 lore raw

PATCH 1/1 wifi: rtw89: avoid inaccessible IO operations during doing change_interface()

During doing change_interface(), hardware is power-off, so some components are inaccessible and return error. This causes things unexpected, and we don't have a warning message for that. So, ignore some IO operations in this situation, and add a warning message to indicate something wrong.

---
 drivers/net/wireless/realtek/rtw89/core.h     |  1 +
 drivers/net/wireless/realtek/rtw89/mac.c      |  7 +++++++
 drivers/net/wireless/realtek/rtw89/mac80211.c | 11 ++++++++++-
 3 files changed, 18 insertions(+), 1 deletion(-)
drivers/net/wireless/realtek/rtw89/core.h +1 -0
index b60de6662548b..dfd0ba8cb5772 100644
@@ -2959,6 +2959,7 @@ enum rtw89_flags {
 	RTW89_FLAG_CRASH_SIMULATING,
 	RTW89_FLAG_WOWLAN,
 	RTW89_FLAG_FORBIDDEN_TRACK_WROK,
+	RTW89_FLAG_CHANGING_INTERFACE,
 
 	NUM_OF_RTW89_FLAGS,
 };
drivers/net/wireless/realtek/rtw89/mac.c +7 -0
index ecd603a881345..6587cdf6ba624 100644
@@ -3600,6 +3600,13 @@ int rtw89_mac_set_macid_pause(struct rtw89_dev *rtwdev, u8 macid, bool pause)
 	u8 grp = macid >> 5;
 	int ret;
 
+	/* If this is called by change_interface() in the case of P2P, it could
+	 * be power-off, so ignore this operation.
+	 */
+	if (test_bit(RTW89_FLAG_CHANGING_INTERFACE, rtwdev->flags) &&
+	    !test_bit(RTW89_FLAG_POWERON, rtwdev->flags))
+		return 0;
+
 	ret = rtw89_mac_check_mac_en(rtwdev, RTW89_MAC_0, RTW89_CMAC_SEL);
 	if (ret)
 		return ret;
drivers/net/wireless/realtek/rtw89/mac80211.c +10 -1
index 6e79bf899901d..ce980d2f22c46 100644
@@ -174,6 +174,9 @@ static int rtw89_ops_change_interface(struct ieee80211_hw *hw,
 				      enum nl80211_iftype type, bool p2p)
 {
 	struct rtw89_dev *rtwdev = hw->priv;
+	int ret;
+
+	set_bit(RTW89_FLAG_CHANGING_INTERFACE, rtwdev->flags);
 
 	rtw89_debug(rtwdev, RTW89_DBG_STATE, "change vif %pM (%d)->(%d), p2p (%d)->(%d)\n",
 		    vif->addr, vif->type, type, vif->p2p, p2p);
@@ -183,7 +186,13 @@ static int rtw89_ops_change_interface(struct ieee80211_hw *hw,
 	vif->type = type;
 	vif->p2p = p2p;
 
-	return rtw89_ops_add_interface(hw, vif);
+	ret = rtw89_ops_add_interface(hw, vif);
+	if (ret)
+		rtw89_warn(rtwdev, "failed to change interface %d\n", ret);
+
+	clear_bit(RTW89_FLAG_CHANGING_INTERFACE, rtwdev->flags);
+
+	return ret;
 }
 
 static void rtw89_ops_configure_filter(struct ieee80211_hw *hw,
Signature · 1 line
2.25.1
#1 lore raw
Quoted 6 lines · Ping-Ke Shih

During doing change_interface(), hardware is power-off, so some components are inaccessible and return error. This causes things unexpected, and we don't have a warning message for that. So, ignore some IO operations in this situation, and add a warning message to indicate something wrong.

Patch applied to wireless-next.git, thanks.

ac3a9f1838d8 wifi: rtw89: avoid inaccessible IO operations during doing change_interface()

Signature · 3 lines
https://patchwork.kernel.org/project/linux-wireless/patch/[email protected]/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches