pmbus core: Add power good support
PATCH 1/1 pmbus core: Add power good support
From: Patrick Rudolph <[email protected]>
Update error flags with regulation out if regulator is on & power good status bit is set
Signed-off-by Patrick Rudolph <[email protected]>
Signed-off-by Naresh Solanki <[email protected]>
--- drivers/hwmon/pmbus/pmbus_core.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)
drivers/hwmon/pmbus/pmbus_core.c +6 -2
@@ -2827,9 +2827,13 @@ static int pmbus_regulator_get_error_flags(struct regulator_dev *rdev, unsignedif (status <0 )return status; -if (pmbus_regulator_is_enabled (rdev) && (status &PB_STATUS_OFF )) - *flags |=REGULATOR_ERROR_FAIL ; +if (pmbus_regulator_is_enabled (rdev)) { +if (status &PB_STATUS_OFF ) + *flags |=REGULATOR_ERROR_FAIL ; +if (status &PB_STATUS_POWER_GOOD_N ) + *flags |=REGULATOR_ERROR_REGULATION_OUT ; + }/* * Unlike most other status bits, PB_STATUS_{IOUT_OC,VOUT_OV} are * defined strictly as fault indicators (not warnings).
base-commit: 27fea302952d8c90cafbdbee96bafeca03544401
Signature · 1 line
2.37.3
Quoted 7 lines · Naresh Solanki
From: Patrick Rudolph <[email protected]>
Update error flags with regulation out if regulator is on & power good status bit is set
Signed-off-by Patrick Rudolph <[email protected]>Signed-off-by Naresh Solanki <[email protected]>
Applied to hwmon-next.
Thanks,
Guenter