Skip to contentSkip to conversation

dt-bindings: arm: ti: Add bindings for BeagleBone AI-64

PATCH Applied Robert Nelson 2 participants 3 messages Nov 18, 2022 – Nov 21, 2022

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH v6 1/2 dt-bindings: arm: ti: Add bindings for BeagleBone AI-64

This board is based on the ti,j721e

https://beagleboard.org/ai-64
https://git.beagleboard.org/beagleboard/beaglebone-ai-64

CC Nishanth Menon <[email protected]>
CC Jason Kridner <[email protected]>
CC Drew Fustini <[email protected]>

---
Changes since v5:
- no changes
Changes since v4:
- no changes
Changes since v3:
- added Acked-by from Rob Herring
Changes since v2:
- rebased on next after k3.yaml alphabetical sort
Changes since v1:
- added documenation links
- add board in alphabetical order

---
 Documentation/devicetree/bindings/arm/ti/k3.yaml | 1 +
 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/arm/ti/k3.yaml +1 -0
index 28b8232e1c5b..09e6845ff243 100644
@@ -61,6 +61,7 @@ properties:
           - const: ti,j721e
           - items:
               - enum:
+                  - beagle,j721e-beagleboneai64
                   - ti,j721e-evm
                   - ti,j721e-sk
               - const: ti,j721e
Signature · 1 line
2.30.2
#1 lore raw

PATCH v6 2/2 arm64: dts: ti: Add k3-j721e-beagleboneai64

BeagleBoard.org BeagleBone AI-64 is an open source hardware single board computer based on the Texas Instruments TDA4VM SoC featuring dual-core 2.0GHz Arm Cortex-A72 processor, C7x+MMA and 2 C66x floating-point VLIW DSPs, 3x dual Arm Cortex-R5 co-processors, 2x 6-core Programmable Real-Time Unit and Industrial Communication SubSystem, PowerVR Rogue 8XE GE8430 3D GPU. The board features 4GB DDR4, USB3.0 Type-C, 2x USB SS Type-A, miniDisplayPort, 2x 4-lane CSI, DSI, 16GB eMMC flash, 1G Ethernet, M.2 E-key for WiFi/BT, and BeagleBone expansion headers.

This board family can be indentified by the BBONEAI-64-B0 in the at24 eeprom:

[aa 55 33 ee 01 37 00 10  2e 00 42 42 4f 4e 45 41 |.U3..7....BBONEA|]
[49 2d 36 34 2d 42 30 2d  00 00 42 30 30 30 37 38 |I-64-B0-..B00078|]

https://beagleboard.org/ai-64
https://git.beagleboard.org/beagleboard/beaglebone-ai-64

CC Nishanth Menon <[email protected]>
CC Vignesh Raghavendra <[email protected]>
CC Tero Kristo <[email protected]>
CC Jason Kridner <[email protected]>
CC Drew Fustini <[email protected]>

---
Changes since v5:
- led: drop un-documented phy0tx trigger
- regulator: use gpio over gpios
- gpio-line-names: drop names till rule is updated for 128 entries
Changes since v4:
- secure_ddr - removed alignment property
- gpio-keys - removed un-needed autorepeat
- gpio-keys - use button over switch label
- davinci_mdio - move mcu_mdio_pins_default into davinci_mdio node
- main_r5fss0_core0 - remove firmware name till upstream gets it sorted out
Changes since v3:
- rebased on next after enable/disable device-tree level changes
- Enable UART nodes at the board level
- Enable I2C nodes at the board level
- Enable Mailbox nodes at the board level
- Enable MCASP nodes at the board level
Changes since v2:
- drop bootargs
- use generic node names for regulators
- corrected main-i2c*pins node-names
Changes since v1:
- added product url to license section
- added aliases for serial, mmc and i2c
- use switch-X syntax for switches
- switch-1 removed disabled status
- use led-X syntax for leds
- led-x dropped labels, using functions
- dp_pwr_3v3 removed extra comment, always on regulator setting
- added i2c interfaces that map with BeagleBone Family
- corrected mcu-adc*-pins-default node-names
- main_uart0 corrected comment on TIFS firmware.
- main_gpio0 - removed un-needed okay
- main_gpio1 - removed un-needed okay
- mhdp added missing phy
- main_r5fss0_core0 - corrected missing space
- added tscadc0/tscadc1 pins brought out on board
- marked disabled nodes as unused in this design

---
 arch/arm64/boot/dts/ti/Makefile               |    1 +
 .../boot/dts/ti/k3-j721e-beagleboneai64.dts   | 1055 +++++++++++++++++
 2 files changed, 1056 insertions(+)
 create mode 100644 arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts
arch/arm64/boot/dts/ti/Makefile +1 -0
index 4555a5be2257..cf7c509538a4 100644
@@ -12,6 +12,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-am6528-iot2050-basic-pg2.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced-pg2.dtb
 
+dtb-$(CONFIG_ARCH_K3) += k3-j721e-beagleboneai64.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-j721e-common-proc-board.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-j721e-sk.dtb
 
arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts new file +1055 -0

1,055 lines not on this page · raw message

Signature · 1 line
2.30.2
maintainer Applied
#2 lore raw
In reply to Robert Nelson

Hi Robert Nelson,

Quoted 6 lines · Robert Nelson

This board is based on the ti,j721e

https://beagleboard.org/ai-64
https://git.beagleboard.org/beagleboard/beaglebone-ai-64

I have applied the following to branch ti-k3-dts-next on [1]. Thank you!

I did a minor typo fixup while committing, but thanks for being patient with the series.

[1/2] dt-bindings: arm: ti: Add bindings for BeagleBone AI-64

      commit: b784c27f40cfac1a0097f43bc68207c1bf350f2e
[2/2] arm64: dts: ti: Add k3-j721e-beagleboneai64
      commit: fae14a1cb8dddb83bb923093aade3470a872f048

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent up the chain during the next merge window (or sooner if it is a relevant bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

[1] git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git

Signature · 3 lines
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3  1A34 DDB5 849D 1736 249D